summaryrefslogtreecommitdiffstats
path: root/target/linux/package/openwrt
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/package/openwrt')
-rw-r--r--target/linux/package/openwrt/Makefile7
-rwxr-xr-xtarget/linux/package/openwrt/files/S05nvram.brcm102
-rw-r--r--target/linux/package/openwrt/files/network.overrides.brcm87
3 files changed, 120 insertions, 76 deletions
diff --git a/target/linux/package/openwrt/Makefile b/target/linux/package/openwrt/Makefile
index 45b33b886..6fb20d622 100644
--- a/target/linux/package/openwrt/Makefile
+++ b/target/linux/package/openwrt/Makefile
@@ -36,12 +36,13 @@ $(IDIR_OPENWRT):
$(SED) s,base-files-arch,base-files-$(BOARD),g $(IDIR_OPENWRT)/CONTROL/control
$(IPKG_OPENWRT): $(IDIR_OPENWRT)
- mkdir -p $(IDIR_OPENWRT)/etc
- cp files/network.overrides.$(BOARD) $(IDIR_OPENWRT)/etc/network.overrides
+ mkdir -p $(IDIR_OPENWRT)/etc/init.d
+ [ -f files/network.overrides.$(BOARD) ] && cp files/network.overrides.$(BOARD) $(IDIR_OPENWRT)/etc/network.overrides
+ [ -f files/S05nvram.$(BOARD) ] && install -m0755 files/S05nvram.$(BOARD) $(IDIR_OPENWRT)/etc/init.d/S05nvram
$(RSTRIP) $(IDIR_OPENWRT)
$(IPKG_BUILD) $(IDIR_OPENWRT) $(PACKAGE_DIR)
-install: $(IPKG_OPENWRT)
+install: compile
$(IPKG) install $(IPKG_OPENWRT)
compile: install-dev $(IPKG_OPENWRT)
install-dev:
diff --git a/target/linux/package/openwrt/files/S05nvram.brcm b/target/linux/package/openwrt/files/S05nvram.brcm
new file mode 100755
index 000000000..0d1300b96
--- /dev/null
+++ b/target/linux/package/openwrt/files/S05nvram.brcm
@@ -0,0 +1,102 @@
+# NVRAM setup
+#
+# This file handles the NVRAM quirks of various hardware.
+
+. /etc/network.overrides
+alias debug=${DEBUG:-:}
+
+remap () {
+ for type in lan wifi wan pppoe
+ do
+ for s in '' s
+ do
+ eval nvram set ${type}_ifname$s=\"$(nvram get ${type}_ifname$s|sed s/$1/$2/g)\"
+ done
+ done
+}
+
+nvram_default() {
+ [ -z "$(nvram get $1)" ] && nvram set "$1=$2"
+}
+
+# linksys bug; remove when not using static configuration for lan
+nvram set lan_proto="static"
+
+# hacks for wrt54g 1.x hardware
+[ "$(nvram get boardnum)" = "42" \
+-a "$(nvram get boardtype)" = "bcm94710dev" ] && {
+ debug "### wrt54g 1.x hack ###"
+ nvram set vlan1hwname="et0"
+ nvram set vlan2hwname="et0"
+ remap eth0 vlan2
+ remap eth1 vlan1
+}
+
+# hacks for asus wl-500g deluxe
+[ "$(nvram get boardtype)" = "bcm95365r" \
+-a "$(nvram get boardnum)" = "45" ] && {
+ debug "### wl-500g deluxe hacks ###"
+ nvram set vlan0hwname="et0"
+ nvram set vlan1hwname="et0"
+ remap eth0.1 vlan0
+ remap eth0 vlan1
+
+ # set up the vlan*ports variables for the asus wl-500g deluxe
+ # if they don't already exist
+ nvram_default vlan0ports "1 2 3 4 5*"
+ nvram_default vlan1ports "0 5"
+}
+
+# hacks for asus wl-300g
+[ "$(nvram get productid)" = "WL300g" ] && {
+ debug "### wl-300g hacks ###"
+ nvram set lan_ifnames="eth0 eth2"
+ nvram set wan_ifname="none"
+}
+
+# hacks for asus wl-hdd
+[ "$(nvram get productid)" = "WLHDD" ] && {
+ debug "### wl-hdd hacks ###"
+ nvram set lan_ifnames="eth1 eth2"
+ nvram set wan_ifname="none"
+}
+
+# hacks for wap54g hardware
+[ "$(nvram get boardnum)" = "2" \
+-o "$(nvram get boardnum)" = "1024" ] && {
+ debug "### wap54g hack ###"
+ nvram set wan_ifname="none"
+}
+
+# hacks for buffalo wla2-g54l
+[ "$(nvram get boardnum)" = "00" \
+-a "$(nvram get product_name)" = "Product_name" \
+-o "$(nvram get product_name)" = "WLA2-G54L" ] && {
+ debug "### wla2-g54l hacks ###"
+ nvram set wan_ifname="none"
+ nvram set lan_ifnames="vlan0"
+}
+
+# needed at least for wrt54gs v1.1 and wrt54g v2.0, v2.2
+[ \! -z "$(nvram get boardrev)" ] && {
+ nvram set wl0id=0x4320
+}
+
+# defaults
+nvram_default lan_ifname "br0"
+nvram_default lan_ifnames "$FAILSAFE_ifnames"
+
+nvram_default wan_ifname "vlan1"
+nvram_default wan_proto "dhcp"
+
+nvram_default wl0_ssid OpenWrt
+nvram_default wl0_mode ap
+nvram_default wl0_infra 1
+nvram_default wl0_radio 1
+
+[ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && {
+ # if default wifi mac, set two higher than the lan mac
+ nvram set il0macaddr=$(nvram get et0macaddr|
+ awk '{OFS=FS=":";for(x=7,y=2;--x;){$x=sprintf("%02x",(y+="0x"$x)%256);y/=256}print}')
+}
+
diff --git a/target/linux/package/openwrt/files/network.overrides.brcm b/target/linux/package/openwrt/files/network.overrides.brcm
index 9766108a9..66f1abd24 100644
--- a/target/linux/package/openwrt/files/network.overrides.brcm
+++ b/target/linux/package/openwrt/files/network.overrides.brcm
@@ -6,82 +6,23 @@
# Load sysconf defaults
[ -f /etc/sysconf ] && . /etc/sysconf
-# linksys bug; remove when not using static configuration for lan
-lan_proto="static"
-
-remap () {
- for type in lan wifi wan pppoe
- do
- for s in '' s
- do
- eval ${type}_ifname$s=\"$(nvram get ${type}_ifname$s|sed s/$1/$2/g)\"
- done
- done
-}
-
# hacks for wrt54g 1.x hardware
[ "$(nvram get boardnum)" = "42" \
--a "$(nvram get boardtype)" = "bcm94710dev" ] && {
- debug "### wrt54g 1.x hack ###"
- vlan1hwname="et0"
- vlan2hwname="et0"
- FAILSAFE_ifnames="vlan1 vlan2 eth2"
- remap eth0 vlan2
- remap eth1 vlan1
-}
+-a "$(nvram get boardtype)" = "bcm94710dev" ] && FAILSAFE_ifnames="vlan1 vlan2 eth2"
# hacks for asus wl-500g deluxe
[ "$(nvram get boardtype)" = "bcm95365r" \
--a "$(nvram get boardnum)" = "45" ] && {
- debug "### wl-500g deluxe hacks ###"
- vlan0hwname="et0"
- vlan1hwname="et0"
- FAILSAFE_ifnames="vlan0 eth1"
- remap eth0.1 vlan0
- remap eth0 vlan1
-}
-
-# hacks for asus wl-300g
-[ "$(nvram get productid)" = "WL300g" ] && {
- debug "### wl-300g hacks ###"
- lan_ifnames="eth0 eth2"
- wan_ifname="none"
-}
+-a "$(nvram get boardnum)" = "45" ] && FAILSAFE_ifnames="vlan0 eth1"
# hacks for wap54g hardware
[ "$(nvram get boardnum)" = "2" \
--o "$(nvram get boardnum)" = "1024" ] && {
- debug "### wap54g hack ###"
- wan_ifname="none"
- FAILSAFE_ifnames="eth0 eth1"
-}
-
-# hacks for buffalo wla2-g54l
-[ "$(nvram get boardnum)" = "00" \
--a "$(nvram get product_name)" = "Product_name" \
--o "$(nvram get product_name)" = "WLA2-G54L" ] && {
- debug "### wla2-g54l hacks ###"
- wan_ifname="none"
- lan_ifnames="vlan0"
-}
+-o "$(nvram get boardnum)" = "1024" ] && FAILSAFE_ifnames="eth0 eth1"
# hack for asus wl-500g hardware
-[ "$(nvram get boardnum)" = "asusX" \
--a "$(nvram get boardtype)" = "bcm94710dev" ] && {
- FAILSAFE_ifnames="eth0 eth2"
-}
-
-# defaults if lan_ifname is missing
-[ -z "$(nvram get lan_ifname)" ] && {
- lan_ifname="br0"
- lan_ifnames=${FAILSAFE_ifnames:-"vlan0 vlan2 eth1 eth2 eth3"}
-}
-
-# defaults if wan_ifname is missing
-[ -z "$(nvram get wan_ifname)" ] && {
- wan_ifname="vlan1"
- wan_proto="dhcp"
-}
+[ "$(nvram get boardnum)" = "asusX" \
+-a "$(nvram get boardtype)" = "bcm94710dev" ] && FAILSAFE_ifnames="eth0 eth1 eth2"
+
+FAILSAFE_ifnames=${FAILSAFE_ifnames:-"vlan0 vlan1 eth1 eth2 eth3"}
DEFAULT_lan_ipaddr=${BR2_SYSCONF_FAILSAFE_IP:-"192.168.1.1"}
DEFAULT_lan_netmask=${BR2_SYSCONF_FAILSAFE_NETMASK:-"255.255.255.0"}
@@ -90,11 +31,11 @@ DEFAULT_lan_hwaddr=${BR2_SYSCONF_FAILSAFE_MAC:-"00:0B:AD:0A:DD:00"}
# failsafe if reset is held
[ "$FAILSAFE" = "true" ] && {
echo "### YOU ARE IN FAILSAFE MODE ####"
- lan_ifname="br0"
- lan_ifnames=${FAILSAFE_ifnames:-"vlan0 vlan1 eth1 eth2 eth3"}
- lan_ipaddr=$DEFAULT_lan_ipaddr
- lan_netmask=$DEFAULT_lan_netmask
- lan_hwaddr=$DEFAULT_lan_hwaddr
- wan_ifname="none"
- wifi_ifname="none"
+ NVRAM_lan_ifname="br0"
+ NVRAM_lan_ifnames=$FAILSAFE_ifnames
+ NVRAM_lan_ipaddr=DEFAULT_lan_ipaddr
+ NVRAM_lan_netmask=DEFAULT_lan_netmask
+ NVRAM_lan_hwaddr=DEFAULT_lan_hwaddr
+ NVRAM_wan_ifname="none"
+ NVRAM_wifi_ifname="none"
}