diff options
Diffstat (limited to 'target/linux/omap24xx/patches-2.6.35/300-nokia-board.patch')
-rw-r--r-- | target/linux/omap24xx/patches-2.6.35/300-nokia-board.patch | 733 |
1 files changed, 733 insertions, 0 deletions
diff --git a/target/linux/omap24xx/patches-2.6.35/300-nokia-board.patch b/target/linux/omap24xx/patches-2.6.35/300-nokia-board.patch new file mode 100644 index 000000000..f0bf954dc --- /dev/null +++ b/target/linux/omap24xx/patches-2.6.35/300-nokia-board.patch @@ -0,0 +1,733 @@ +Index: linux-2.6.35/arch/arm/mach-omap1/board-nokia770.c +=================================================================== +--- linux-2.6.35.orig/arch/arm/mach-omap1/board-nokia770.c 2010-08-08 12:56:15.000000000 +0200 ++++ linux-2.6.35/arch/arm/mach-omap1/board-nokia770.c 2010-08-08 12:56:30.000000000 +0200 +@@ -37,6 +37,7 @@ + #include <plat/lcd_mipid.h> + #include <plat/mmc.h> + #include <plat/clock.h> ++#include <plat/cbus.h> + + #define ADS7846_PENDOWN_GPIO 15 + +@@ -96,8 +97,23 @@ static struct platform_device nokia770_k + .resource = nokia770_kp_resources, + }; + ++static struct cbus_host_platform_data nokia770_cbus_data = { ++ .clk_gpio = OMAP_MPUIO(11), ++ .dat_gpio = OMAP_MPUIO(10), ++ .sel_gpio = OMAP_MPUIO(9), ++}; ++ ++static struct platform_device nokia770_cbus_device = { ++ .name = "cbus", ++ .id = -1, ++ .dev = { ++ .platform_data = &nokia770_cbus_data, ++ }, ++}; ++ + static struct platform_device *nokia770_devices[] __initdata = { + &nokia770_kp_device, ++ &nokia770_cbus_device, + }; + + static void mipid_shutdown(struct mipid_platform_data *pdata) +Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c +=================================================================== +--- linux-2.6.35.orig/arch/arm/mach-omap2/board-n8x0.c 2010-08-08 12:56:15.000000000 +0200 ++++ linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c 2010-08-08 12:56:30.000000000 +0200 +@@ -18,8 +18,12 @@ + #include <linux/io.h> + #include <linux/stddef.h> + #include <linux/i2c.h> ++#include <linux/platform_device.h> + #include <linux/spi/spi.h> ++#include <linux/spi/tsc2005.h> ++#include <linux/input.h> + #include <linux/usb/musb.h> ++#include <linux/i2c/lm8323.h> + + #include <asm/mach/arch.h> + #include <asm/mach-types.h> +@@ -32,6 +36,117 @@ + #include <plat/onenand.h> + #include <plat/mmc.h> + #include <plat/serial.h> ++#include <plat/cbus.h> ++ ++#define RX51_TSC2005_RESET_GPIO 94 ++#define RX51_TSC2005_IRQ_GPIO 106 ++#define OMAP_TAG_NOKIA_BT 0x4e01 ++ ++static s16 rx44_keymap[LM8323_KEYMAP_SIZE] = { ++ [0x01] = KEY_Q, ++ [0x02] = KEY_K, ++ [0x03] = KEY_O, ++ [0x04] = KEY_P, ++ [0x05] = KEY_BACKSPACE, ++ [0x06] = KEY_A, ++ [0x07] = KEY_S, ++ [0x08] = KEY_D, ++ [0x09] = KEY_F, ++ [0x0a] = KEY_G, ++ [0x0b] = KEY_H, ++ [0x0c] = KEY_J, ++ ++ [0x11] = KEY_W, ++ [0x12] = KEY_F4, ++ [0x13] = KEY_L, ++ [0x14] = KEY_APOSTROPHE, ++ [0x16] = KEY_Z, ++ [0x17] = KEY_X, ++ [0x18] = KEY_C, ++ [0x19] = KEY_V, ++ [0x1a] = KEY_B, ++ [0x1b] = KEY_N, ++ [0x1c] = KEY_LEFTSHIFT, /* Actually, this is both shift keys */ ++ [0x1f] = KEY_F7, ++ ++ [0x21] = KEY_E, ++ [0x22] = KEY_SEMICOLON, ++ [0x23] = KEY_MINUS, ++ [0x24] = KEY_EQUAL, ++ [0x2b] = KEY_FN, ++ [0x2c] = KEY_M, ++ [0x2f] = KEY_F8, ++ ++ [0x31] = KEY_R, ++ [0x32] = KEY_RIGHTCTRL, ++ [0x34] = KEY_SPACE, ++ [0x35] = KEY_COMMA, ++ [0x37] = KEY_UP, ++ [0x3c] = KEY_COMPOSE, ++ [0x3f] = KEY_F6, ++ ++ [0x41] = KEY_T, ++ [0x44] = KEY_DOT, ++ [0x46] = KEY_RIGHT, ++ [0x4f] = KEY_F5, ++ [0x51] = KEY_Y, ++ [0x53] = KEY_DOWN, ++ [0x55] = KEY_ENTER, ++ [0x5f] = KEY_ESC, ++ ++ [0x61] = KEY_U, ++ [0x64] = KEY_LEFT, ++ ++ [0x71] = KEY_I, ++ [0x75] = KEY_KPENTER, ++}; ++ ++static struct lm8323_platform_data lm8323_pdata = { ++ .repeat = 0, /* Repeat is handled in userspace for now. */ ++ .keymap = rx44_keymap, ++ .size_x = 8, ++ .size_y = 12, ++ .debounce_time = 12, ++ .active_time = 500, ++ ++ .name = "Internal keyboard", ++ .pwm_names[0] = "n810::keyboard", ++ .pwm_names[1] = "n810::cover", ++ //.pwm1_name = "n810::keyboard", ++ //.pwm2_name = "n810::cover", ++}; ++ ++struct omap_bluetooth_config { ++ u8 chip_type; ++ u8 bt_wakeup_gpio; ++ u8 host_wakeup_gpio; ++ u8 reset_gpio; ++ u8 bt_uart; ++ u8 bd_addr[6]; ++ u8 bt_sysclk; ++}; ++ ++static struct platform_device n8x0_bt_device = { ++ .name = "hci_h4p", ++ .id = -1, ++ .num_resources = 0, ++}; ++ ++void __init n8x0_bt_init(void) ++{ ++ const struct omap_bluetooth_config *bt_config; ++ ++ bt_config = (void *) omap_get_config(OMAP_TAG_NOKIA_BT, ++ struct omap_bluetooth_config); ++ n8x0_bt_device.dev.platform_data = (void *) bt_config; ++ if (platform_device_register(&n8x0_bt_device) < 0) ++ BUG(); ++} ++ ++static struct omap2_mcspi_device_config mipid_mcspi_config = { ++ .turbo_mode = 0, ++ .single_channel = 1, ++}; + + static int slot1_cover_open; + static int slot2_cover_open; +@@ -139,7 +254,34 @@ static struct omap2_mcspi_device_config + .single_channel = 1, + }; + ++#ifdef CONFIG_MACH_NOKIA_N8X0_LCD ++extern struct mipid_platform_data n8x0_mipid_platform_data; ++#endif ++ ++#ifdef CONFIG_TOUCHSCREEN_TSC2005 ++static struct tsc2005_platform_data tsc2005_config; ++static void rx51_tsc2005_set_reset(bool enable) ++{ ++ gpio_set_value(RX51_TSC2005_RESET_GPIO, enable); ++} ++ ++static struct omap2_mcspi_device_config tsc2005_mcspi_config = { ++ .turbo_mode = 0, ++ .single_channel = 1, ++}; ++#endif ++ + static struct spi_board_info n800_spi_board_info[] __initdata = { ++#ifdef CONFIG_MACH_NOKIA_N8X0_LCD ++ { ++ .modalias = "lcd_mipid", ++ .bus_num = 1, ++ .chip_select = 1, ++ .max_speed_hz = 4000000, ++ .controller_data= &mipid_mcspi_config, ++ .platform_data = &n8x0_mipid_platform_data, ++ }, ++#endif + { + .modalias = "p54spi", + .bus_num = 2, +@@ -147,6 +289,68 @@ static struct spi_board_info n800_spi_bo + .max_speed_hz = 48000000, + .controller_data = &p54spi_mcspi_config, + }, ++ { ++ .modalias = "tsc2005", ++ .bus_num = 1, ++ .chip_select = 0, ++ .irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO), ++ .max_speed_hz = 6000000, ++ .controller_data = &tsc2005_mcspi_config, ++ .platform_data = &tsc2005_config, ++ }, ++}; ++ ++static void __init tsc2005_set_config(void) ++{ ++ const struct omap_lcd_config *conf; ++ ++ conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config); ++ if (conf != NULL) { ++#ifdef CONFIG_TOUCHSCREEN_TSC2005 ++ if (strcmp(conf->panel_name, "lph8923") == 0) { ++ tsc2005_config.ts_x_plate_ohm = 180; ++ tsc2005_config.ts_hw_avg = 0; ++ tsc2005_config.ts_ignore_last = 0; ++ tsc2005_config.ts_touch_pressure = 1500; ++ tsc2005_config.ts_stab_time = 100; ++ tsc2005_config.ts_pressure_max = 2048; ++ tsc2005_config.ts_pressure_fudge = 2; ++ tsc2005_config.ts_x_max = 4096; ++ tsc2005_config.ts_x_fudge = 4; ++ tsc2005_config.ts_y_max = 4096; ++ tsc2005_config.ts_y_fudge = 7; ++ tsc2005_config.set_reset = rx51_tsc2005_set_reset; ++ } else if (strcmp(conf->panel_name, "ls041y3") == 0) { ++ tsc2005_config.ts_x_plate_ohm = 280; ++ tsc2005_config.ts_hw_avg = 0; ++ tsc2005_config.ts_ignore_last = 0; ++ tsc2005_config.ts_touch_pressure = 1500; ++ tsc2005_config.ts_stab_time = 1000; ++ tsc2005_config.ts_pressure_max = 2048; ++ tsc2005_config.ts_pressure_fudge = 2; ++ tsc2005_config.ts_x_max = 4096; ++ tsc2005_config.ts_x_fudge = 4; ++ tsc2005_config.ts_y_max = 4096; ++ tsc2005_config.ts_y_fudge = 7; ++ tsc2005_config.set_reset = rx51_tsc2005_set_reset; ++ } else { ++ printk(KERN_ERR "Unknown panel type, set default " ++ "touchscreen configuration\n"); ++ tsc2005_config.ts_x_plate_ohm = 200; ++ tsc2005_config.ts_stab_time = 100; ++ } ++#endif ++ } ++} ++ ++static struct i2c_board_info __initdata_or_module n8x0_i2c_board_info_2[] = {}; ++ ++static struct i2c_board_info __initdata_or_module n810_i2c_board_info_2[] = { ++ { ++ I2C_BOARD_INFO("lm8323", 0x45), ++ .irq = OMAP_GPIO_IRQ(109), ++ .platform_data = &lm8323_pdata, ++ }, + }; + + #if defined(CONFIG_MTD_ONENAND_OMAP2) || \ +@@ -181,6 +385,20 @@ static struct mtd_partition onenand_part + }, + }; + ++static struct cbus_host_platform_data n8x0_cbus_data = { ++ .clk_gpio = 66, ++ .dat_gpio = 65, ++ .sel_gpio = 64, ++}; ++ ++static struct platform_device n8x0_cbus_device = { ++ .name = "cbus", ++ .id = -1, ++ .dev = { ++ .platform_data = &n8x0_cbus_data, ++ }, ++}; ++ + static struct omap_onenand_platform_data board_onenand_data = { + .cs = 0, + .gpio_irq = 26, +@@ -649,14 +867,37 @@ static void __init n8x0_init_irq(void) + omap_gpio_init(); + } + ++#ifdef CONFIG_MACH_NOKIA_N8X0_LCD ++extern void n8x0_mipid_init(void); ++extern void n8x0_blizzard_init(void); ++#else ++#define n8x0_mipid_init() 0 ++#define n8x0_blizzard_init() 0 ++#endif ++ + static void __init n8x0_init_machine(void) + { ++ platform_device_register(&n8x0_cbus_device); ++ ++ n8x0_bt_init(); ++ + /* FIXME: add n810 spi devices */ ++ tsc2005_set_config(); + spi_register_board_info(n800_spi_board_info, + ARRAY_SIZE(n800_spi_board_info)); + + omap_serial_init(); + n8x0_menelaus_init(); ++ ++ omap_register_i2c_bus(2, 400, n8x0_i2c_board_info_2, ++ ARRAY_SIZE(n8x0_i2c_board_info_2)); ++ ++ i2c_register_board_info(2, n810_i2c_board_info_2, ++ ARRAY_SIZE(n810_i2c_board_info_2)); ++ ++ n8x0_mipid_init(); ++ n8x0_blizzard_init(); ++ + n8x0_onenand_init(); + n8x0_mmc_init(); + n8x0_usb_init(); +Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0-lcd.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.35/arch/arm/mach-omap2/board-n8x0-lcd.c 2010-08-08 12:56:31.000000000 +0200 +@@ -0,0 +1,127 @@ ++/* ++ * linux/arch/arm/mach-omap2/board-n8x0.c ++ * ++ * Copyright (C) 2005-2009 Nokia Corporation ++ * Author: Juha Yrjola <juha.yrjola@nokia.com> ++ * ++ * Modified from mach-omap2/board-generic.c ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include <linux/clk.h> ++#include <linux/delay.h> ++#include <linux/gpio.h> ++#include <linux/omapfb.h> ++ ++#include <plat/lcd_mipid.h> ++#include <plat/blizzard.h> ++ ++#include <../drivers/cbus/tahvo.h> ++ ++#define N8X0_BLIZZARD_POWERDOWN_GPIO 15 ++ ++// MIPID LCD Panel ++ ++static void mipid_shutdown(struct mipid_platform_data *pdata) ++{ ++ if (pdata->nreset_gpio != -1) { ++ pr_info("shutdown LCD\n"); ++ gpio_set_value(pdata->nreset_gpio, 0); ++ msleep(120); ++ } ++} ++ ++struct mipid_platform_data n8x0_mipid_platform_data = { ++ .shutdown = mipid_shutdown, ++}; ++ ++void __init n8x0_mipid_init(void) ++{ ++ const struct omap_lcd_config *conf; ++ ++ conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config); ++ if (conf != NULL) { ++ n8x0_mipid_platform_data.nreset_gpio = conf->nreset_gpio; ++ n8x0_mipid_platform_data.data_lines = conf->data_lines; ++ printk(KERN_INFO "N8x0 MIPID config loaded"); ++ } ++ else ++ printk(KERN_INFO "N8x0 MIPID config not provided"); ++} ++ ++ ++// Epson Blizzard LCD Controller ++ ++static struct { ++ struct clk *sys_ck; ++} blizzard; ++ ++static int blizzard_get_clocks(void) ++{ ++ blizzard.sys_ck = clk_get(0, "osc_ck"); ++ if (IS_ERR(blizzard.sys_ck)) { ++ printk(KERN_ERR "can't get Blizzard clock\n"); ++ return PTR_ERR(blizzard.sys_ck); ++ } ++ return 0; ++} ++ ++static unsigned long blizzard_get_clock_rate(struct device *dev) ++{ ++ return clk_get_rate(blizzard.sys_ck); ++} ++ ++static void blizzard_enable_clocks(int enable) ++{ ++ if (enable) ++ clk_enable(blizzard.sys_ck); ++ else ++ clk_disable(blizzard.sys_ck); ++} ++ ++static void blizzard_power_up(struct device *dev) ++{ ++ /* Vcore to 1.475V */ ++ tahvo_set_clear_reg_bits(0x07, 0, 0xf); ++ msleep(10); ++ ++ blizzard_enable_clocks(1); ++ gpio_set_value(N8X0_BLIZZARD_POWERDOWN_GPIO, 1); ++} ++ ++static void blizzard_power_down(struct device *dev) ++{ ++ gpio_set_value(N8X0_BLIZZARD_POWERDOWN_GPIO, 0); ++ blizzard_enable_clocks(0); ++ ++ /* Vcore to 1.005V */ ++ tahvo_set_clear_reg_bits(0x07, 0xf, 0); ++} ++ ++static struct blizzard_platform_data n8x0_blizzard_data = { ++ .power_up = blizzard_power_up, ++ .power_down = blizzard_power_down, ++ .get_clock_rate = blizzard_get_clock_rate, ++ .te_connected = 1, ++}; ++ ++void __init n8x0_blizzard_init(void) ++{ ++ int r; ++ ++ r = gpio_request(N8X0_BLIZZARD_POWERDOWN_GPIO, "Blizzard pd"); ++ if (r < 0) ++ { ++ printk(KERN_ERR "Can't get N8x0 Blizzard powerdown GPIO %d\n", N8X0_BLIZZARD_POWERDOWN_GPIO); ++ return; ++ } ++ gpio_direction_output(N8X0_BLIZZARD_POWERDOWN_GPIO, 1); ++ ++ blizzard_get_clocks(); ++ omapfb_set_ctrl_platform_data(&n8x0_blizzard_data); ++ ++ printk(KERN_INFO "N8x0 Blizzard initialized"); ++} +Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0-usb.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.35/arch/arm/mach-omap2/board-n8x0-usb.c 2010-08-08 12:56:31.000000000 +0200 +@@ -0,0 +1,175 @@ ++/* ++ * linux/arch/arm/mach-omap2/board-n8x0-usb.c ++ * ++ * Copyright (C) 2006 Nokia Corporation ++ * Author: Juha Yrjola ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include <linux/types.h> ++#include <linux/delay.h> ++#include <linux/platform_device.h> ++#include <linux/clk.h> ++#include <linux/err.h> ++#include <linux/gpio.h> ++#include <linux/usb/musb.h> ++ ++#include <plat/gpmc.h> ++ ++#define TUSB_ASYNC_CS 1 ++#define TUSB_SYNC_CS 4 ++#define GPIO_TUSB_INT 58 ++#define GPIO_TUSB_ENABLE 0 ++ ++static int tusb_set_power(int state); ++static int tusb_set_clock(struct clk *osc_ck, int state); ++ ++#if defined(CONFIG_USB_MUSB_OTG) ++# define BOARD_MODE MUSB_OTG ++#elif defined(CONFIG_USB_MUSB_PERIPHERAL) ++# define BOARD_MODE MUSB_PERIPHERAL ++#else /* defined(CONFIG_USB_MUSB_HOST) */ ++# define BOARD_MODE MUSB_HOST ++#endif ++ ++static struct musb_hdrc_eps_bits musb_eps[] = { ++ { "ep1_tx", 5, }, ++ { "ep1_rx", 5, }, ++ { "ep2_tx", 5, }, ++ { "ep2_rx", 5, }, ++ { "ep3_tx", 3, }, ++ { "ep3_rx", 3, }, ++ { "ep4_tx", 3, }, ++ { "ep4_rx", 3, }, ++ { "ep5_tx", 2, }, ++ { "ep5_rx", 2, }, ++ { "ep6_tx", 2, }, ++ { "ep6_rx", 2, }, ++ { "ep7_tx", 2, }, ++ { "ep7_rx", 2, }, ++ { "ep8_tx", 2, }, ++ { "ep8_rx", 2, }, ++ { "ep9_tx", 2, }, ++ { "ep9_rx", 2, }, ++ { "ep10_tx", 2, }, ++ { "ep10_rx", 2, }, ++ { "ep11_tx", 2, }, ++ { "ep11_rx", 2, }, ++ { "ep12_tx", 2, }, ++ { "ep12_rx", 2, }, ++ { "ep13_tx", 2, }, ++ { "ep13_rx", 2, }, ++ { "ep14_tx", 2, }, ++ { "ep14_rx", 2, }, ++ { "ep15_tx", 2, }, ++ { "ep15_rx", 2, }, ++}; ++ ++static struct musb_hdrc_config musb_config = { ++ .multipoint = 1, ++ .dyn_fifo = 1, ++ .soft_con = 1, ++ .dma = 1, ++ .num_eps = 16, ++ .dma_channels = 7, ++ .ram_bits = 12, ++ .eps_bits = musb_eps, ++}; ++ ++static struct musb_hdrc_platform_data tusb_data = { ++ .mode = BOARD_MODE, ++ .set_power = tusb_set_power, ++ .set_clock = tusb_set_clock, ++ .min_power = 25, /* x2 = 50 mA drawn from VBUS as peripheral */ ++ .power = 100, /* Max 100 mA VBUS for host mode */ ++ .clock = "osc_ck", ++ .config = &musb_config, ++}; ++ ++/* ++ * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and ++ * 1.5 V voltage regulators of PM companion chip. Companion chip will then ++ * provide then PGOOD signal to TUSB6010 which will release it from reset. ++ */ ++static int tusb_set_power(int state) ++{ ++ int i, retval = 0; ++ ++ if (state) { ++ gpio_set_value(GPIO_TUSB_ENABLE, 1); ++ msleep(1); ++ ++ /* Wait until TUSB6010 pulls INT pin down */ ++ i = 100; ++ while (i && gpio_get_value(GPIO_TUSB_INT)) { ++ msleep(1); ++ i--; ++ } ++ ++ if (!i) { ++ printk(KERN_ERR "tusb: powerup failed\n"); ++ retval = -ENODEV; ++ } ++ } else { ++ gpio_set_value(GPIO_TUSB_ENABLE, 0); ++ msleep(10); ++ } ++ ++ return retval; ++} ++ ++static int osc_ck_on; ++ ++static int tusb_set_clock(struct clk *osc_ck, int state) ++{ ++ if (state) { ++ if (osc_ck_on > 0) ++ return -ENODEV; ++ ++ //omap2_block_sleep(); ++ clk_enable(osc_ck); ++ osc_ck_on = 1; ++ } else { ++ if (osc_ck_on == 0) ++ return -ENODEV; ++ ++ clk_disable(osc_ck); ++ osc_ck_on = 0; ++ //omap2_allow_sleep(); ++ } ++ ++ return 0; ++} ++ ++void __init n8x0_usb_init(void) ++{ ++ int ret = 0; ++ static char announce[] __initdata = KERN_INFO "TUSB 6010\n"; ++ ++ /* PM companion chip power control pin */ ++ ret = gpio_request(GPIO_TUSB_ENABLE, "TUSB6010 enable"); ++ if (ret != 0) { ++ printk(KERN_ERR "Could not get TUSB power GPIO%i\n", ++ GPIO_TUSB_ENABLE); ++ return; ++ } ++ gpio_direction_output(GPIO_TUSB_ENABLE, 0); ++ ++ tusb_set_power(0); ++ ++ ret = tusb6010_setup_interface(&tusb_data, TUSB6010_REFCLK_19, 2, ++ TUSB_ASYNC_CS, TUSB_SYNC_CS, ++ GPIO_TUSB_INT, 0x3f); ++ if (ret != 0) ++ goto err; ++ ++ printk(announce); ++ ++ return; ++ ++err: ++ gpio_free(GPIO_TUSB_ENABLE); ++} +Index: linux-2.6.35/arch/arm/mach-omap2/control.c +=================================================================== +--- linux-2.6.35.orig/arch/arm/mach-omap2/control.c 2010-08-08 12:56:15.000000000 +0200 ++++ linux-2.6.35/arch/arm/mach-omap2/control.c 2010-08-08 12:56:32.000000000 +0200 +@@ -162,6 +162,7 @@ u16 omap_ctrl_readw(u16 offset) + return __raw_readw(OMAP_CTRL_REGADDR(offset)); + } + ++EXPORT_SYMBOL_GPL(omap_ctrl_readl); + u32 omap_ctrl_readl(u16 offset) + { + return __raw_readl(OMAP_CTRL_REGADDR(offset)); +@@ -177,6 +178,7 @@ void omap_ctrl_writew(u16 val, u16 offse + __raw_writew(val, OMAP_CTRL_REGADDR(offset)); + } + ++EXPORT_SYMBOL_GPL(omap_ctrl_writel); + void omap_ctrl_writel(u32 val, u16 offset) + { + __raw_writel(val, OMAP_CTRL_REGADDR(offset)); +Index: linux-2.6.35/arch/arm/mach-omap2/Kconfig +=================================================================== +--- linux-2.6.35.orig/arch/arm/mach-omap2/Kconfig 2010-08-08 12:56:15.000000000 +0200 ++++ linux-2.6.35/arch/arm/mach-omap2/Kconfig 2010-08-08 12:56:33.000000000 +0200 +@@ -116,6 +116,16 @@ config MACH_NOKIA_N8X0 + select MACH_NOKIA_N810 + select MACH_NOKIA_N810_WIMAX + ++config MACH_NOKIA_N8X0_LCD ++ bool ++ depends on MACH_NOKIA_N8X0 && FB_OMAP_LCDC_BLIZZARD && FB_OMAP_LCD_MIPID ++ default y ++ ++config MACH_NOKIA_N8X0_USB ++ bool ++ depends on MACH_NOKIA_N8X0 && MACH_OMAP2_TUSB6010 ++ default y ++ + config MACH_NOKIA_RX51 + bool "Nokia RX-51 board" + depends on ARCH_OMAP3 +Index: linux-2.6.35/arch/arm/mach-omap2/Makefile +=================================================================== +--- linux-2.6.35.orig/arch/arm/mach-omap2/Makefile 2010-08-08 12:56:15.000000000 +0200 ++++ linux-2.6.35/arch/arm/mach-omap2/Makefile 2010-08-08 12:56:33.000000000 +0200 +@@ -116,6 +116,8 @@ obj-$(CONFIG_MACH_OMAP_3430SDP) += boar + hsmmc.o \ + board-sdp-flash.o + obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o ++obj-$(CONFIG_MACH_NOKIA_N8X0_LCD) += board-n8x0-lcd.o ++obj-$(CONFIG_MACH_NOKIA_N8X0_USB) += board-n8x0-usb.o + obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \ + board-rx51-sdram.o \ + board-rx51-peripherals.o \ +Index: linux-2.6.35/arch/arm/mach-omap2/serial.c +=================================================================== +--- linux-2.6.35.orig/arch/arm/mach-omap2/serial.c 2010-08-08 12:56:15.000000000 +0200 ++++ linux-2.6.35/arch/arm/mach-omap2/serial.c 2010-08-08 12:56:34.000000000 +0200 +@@ -495,10 +495,10 @@ static void omap_uart_idle_init(struct o + uart->padconf = 0; + } + +- p->irqflags |= IRQF_SHARED; ++/* p->irqflags |= IRQF_SHARED; + ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED, + "serial idle", (void *)uart); +- WARN_ON(ret); ++ WARN_ON(ret); */ + } + + void omap_uart_enable_irqs(int enable) +@@ -506,13 +506,13 @@ void omap_uart_enable_irqs(int enable) + int ret; + struct omap_uart_state *uart; + +- list_for_each_entry(uart, &uart_list, node) { ++/* list_for_each_entry(uart, &uart_list, node) { + if (enable) + ret = request_irq(uart->p->irq, omap_uart_interrupt, + IRQF_SHARED, "serial idle", (void *)uart); + else + free_irq(uart->p->irq, (void *)uart); +- } ++ } */ + } + + static ssize_t sleep_timeout_show(struct device *dev, |