diff options
Diffstat (limited to 'target/linux/ixp4xx')
35 files changed, 117 insertions, 127 deletions
diff --git a/target/linux/ixp4xx/patches-2.6.26/030-ixp4xx_fsg_board_support.patch b/target/linux/ixp4xx/patches-2.6.26/030-ixp4xx_fsg_board_support.patch index 048b9f746..f5038021d 100644 --- a/target/linux/ixp4xx/patches-2.6.26/030-ixp4xx_fsg_board_support.patch +++ b/target/linux/ixp4xx/patches-2.6.26/030-ixp4xx_fsg_board_support.patch @@ -1,6 +1,6 @@ --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig -@@ -165,6 +165,7 @@ +@@ -165,6 +165,7 @@ CONFIG_ARCH_PRPMC1100=y CONFIG_MACH_NAS100D=y CONFIG_MACH_DSMG600=y CONFIG_ARCH_IXDP4XX=y @@ -8,7 +8,7 @@ CONFIG_CPU_IXP46X=y CONFIG_CPU_IXP43X=y CONFIG_MACH_GTWX5715=y -@@ -770,7 +771,7 @@ +@@ -770,7 +771,7 @@ CONFIG_ATA=y # CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set @@ -17,7 +17,7 @@ # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set # CONFIG_PATA_ALI is not set -@@ -1143,7 +1144,7 @@ +@@ -1143,7 +1144,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -26,7 +26,7 @@ # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set -@@ -1334,8 +1335,8 @@ +@@ -1334,8 +1335,8 @@ CONFIG_LEDS_CLASS=y # # LED drivers # @@ -36,7 +36,7 @@ # # LED Triggers -@@ -1367,7 +1368,7 @@ +@@ -1367,7 +1368,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set @@ -47,7 +47,7 @@ # CONFIG_RTC_DRV_PCF8583 is not set --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig -@@ -125,6 +125,15 @@ +@@ -125,6 +125,15 @@ config ARCH_IXDP4XX depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435 default y @@ -65,7 +65,7 @@ # --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile -@@ -15,6 +15,7 @@ +@@ -15,6 +15,7 @@ obj-pci-$(CONFIG_MACH_NAS100D) += nas10 obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o @@ -73,7 +73,7 @@ obj-y += common.o -@@ -28,6 +29,7 @@ +@@ -28,6 +29,7 @@ obj-$(CONFIG_MACH_NAS100D) += nas100d-se obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o diff --git a/target/linux/ixp4xx/patches-2.6.26/100-wg302v2_gateway7001_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.26/100-wg302v2_gateway7001_mac_plat_info.patch index bbdd00c80..a19a4085a 100644 --- a/target/linux/ixp4xx/patches-2.6.26/100-wg302v2_gateway7001_mac_plat_info.patch +++ b/target/linux/ixp4xx/patches-2.6.26/100-wg302v2_gateway7001_mac_plat_info.patch @@ -1,6 +1,6 @@ --- a/arch/arm/mach-ixp4xx/gateway7001-setup.c +++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c -@@ -76,9 +76,35 @@ +@@ -76,9 +76,35 @@ static struct platform_device gateway700 .resource = &gateway7001_uart_resource, }; @@ -39,7 +39,7 @@ static void __init gateway7001_init(void) --- a/arch/arm/mach-ixp4xx/wg302v2-setup.c +++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c -@@ -77,9 +77,26 @@ +@@ -77,9 +77,26 @@ static struct platform_device wg302v2_ua .resource = &wg302v2_uart_resource, }; diff --git a/target/linux/ixp4xx/patches-2.6.26/105-wg302v1_support.patch b/target/linux/ixp4xx/patches-2.6.26/105-wg302v1_support.patch index 70c91db63..1951ff9ac 100644 --- a/target/linux/ixp4xx/patches-2.6.26/105-wg302v1_support.patch +++ b/target/linux/ixp4xx/patches-2.6.26/105-wg302v1_support.patch @@ -1,6 +1,6 @@ --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig -@@ -155,6 +155,7 @@ +@@ -155,6 +155,7 @@ CONFIG_MACH_AVILA=y CONFIG_MACH_LOFT=y CONFIG_ARCH_ADI_COYOTE=y CONFIG_MACH_GATEWAY7001=y @@ -10,7 +10,7 @@ CONFIG_MACH_IXDPG425=y --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig -@@ -49,6 +49,14 @@ +@@ -49,6 +49,14 @@ config MACH_GATEWAY7001 7001 Access Point. For more information on this platform, see http://openwrt.org @@ -27,7 +27,7 @@ select PCI --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile -@@ -14,6 +14,7 @@ +@@ -14,6 +14,7 @@ obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-p obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o @@ -35,7 +35,7 @@ obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o -@@ -28,6 +29,7 @@ +@@ -28,6 +29,7 @@ obj-$(CONFIG_MACH_NSLU2) += nslu2-setup. obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o diff --git a/target/linux/ixp4xx/patches-2.6.26/110-pronghorn_series_support.patch b/target/linux/ixp4xx/patches-2.6.26/110-pronghorn_series_support.patch index 45589a862..dcfb65033 100644 --- a/target/linux/ixp4xx/patches-2.6.26/110-pronghorn_series_support.patch +++ b/target/linux/ixp4xx/patches-2.6.26/110-pronghorn_series_support.patch @@ -1,6 +1,6 @@ --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig -@@ -157,6 +157,8 @@ +@@ -157,6 +157,8 @@ CONFIG_ARCH_ADI_COYOTE=y CONFIG_MACH_GATEWAY7001=y CONFIG_MACH_WG302V1=y CONFIG_MACH_WG302V2=y @@ -11,7 +11,7 @@ CONFIG_MACH_IXDP465=y --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig -@@ -65,6 +65,22 @@ +@@ -65,6 +65,22 @@ config MACH_WG302V2 WG302 v2 or WAG302 v2 Access Points. For more information on this platform, see http://openwrt.org @@ -36,7 +36,7 @@ help --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile -@@ -17,6 +17,7 @@ +@@ -17,6 +17,7 @@ obj-pci-$(CONFIG_MACH_GATEWAY7001) += ga obj-pci-$(CONFIG_MACH_WG302V1) += wg302v1-pci.o obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o @@ -44,7 +44,7 @@ obj-y += common.o -@@ -32,6 +33,7 @@ +@@ -32,6 +33,7 @@ obj-$(CONFIG_MACH_GATEWAY7001) += gatewa obj-$(CONFIG_MACH_WG302V1) += wg302v1-setup.o obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o obj-$(CONFIG_MACH_FSG) += fsg-setup.o @@ -375,7 +375,7 @@ +MACHINE_END --- a/include/asm-arm/arch-ixp4xx/uncompress.h +++ b/include/asm-arm/arch-ixp4xx/uncompress.h -@@ -41,7 +41,8 @@ +@@ -41,7 +41,8 @@ static __inline__ void __arch_decomp_set * Some boards are using UART2 as console */ if (machine_is_adi_coyote() || machine_is_gtwx5715() || diff --git a/target/linux/ixp4xx/patches-2.6.26/111-pronghorn_swap_uarts.patch b/target/linux/ixp4xx/patches-2.6.26/111-pronghorn_swap_uarts.patch index c2b684d05..b9fa50768 100644 --- a/target/linux/ixp4xx/patches-2.6.26/111-pronghorn_swap_uarts.patch +++ b/target/linux/ixp4xx/patches-2.6.26/111-pronghorn_swap_uarts.patch @@ -1,6 +1,6 @@ --- a/arch/arm/mach-ixp4xx/pronghorn-setup.c +++ b/arch/arm/mach-ixp4xx/pronghorn-setup.c -@@ -51,31 +51,31 @@ +@@ -51,31 +51,31 @@ static struct platform_device pronghorn_ static struct resource pronghorn_uart_resources [] = { { diff --git a/target/linux/ixp4xx/patches-2.6.26/115-sidewinder_support.patch b/target/linux/ixp4xx/patches-2.6.26/115-sidewinder_support.patch index 038d173fc..9a05fabec 100644 --- a/target/linux/ixp4xx/patches-2.6.26/115-sidewinder_support.patch +++ b/target/linux/ixp4xx/patches-2.6.26/115-sidewinder_support.patch @@ -15,7 +15,7 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org> --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig -@@ -81,6 +81,14 @@ +@@ -81,6 +81,14 @@ config MACH_PRONGHORN config MACH_PRONGHORNMETRO def_bool MACH_PRONGHORN @@ -30,7 +30,7 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org> config ARCH_IXDP425 bool "IXDP425" help -@@ -163,7 +171,7 @@ +@@ -163,7 +171,7 @@ config MACH_FSG # config CPU_IXP46X bool @@ -41,7 +41,7 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org> config CPU_IXP43X --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile -@@ -18,6 +18,7 @@ +@@ -18,6 +18,7 @@ obj-pci-$(CONFIG_MACH_WG302V1) += wg302 obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o obj-pci-$(CONFIG_MACH_PRONGHORN) += pronghorn-pci.o @@ -49,7 +49,7 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org> obj-y += common.o -@@ -34,6 +35,7 @@ +@@ -34,6 +35,7 @@ obj-$(CONFIG_MACH_WG302V1) += wg302v1-se obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o obj-$(CONFIG_MACH_FSG) += fsg-setup.o obj-$(CONFIG_MACH_PRONGHORN) += pronghorn-setup.o diff --git a/target/linux/ixp4xx/patches-2.6.26/116-sidewinder_fis_location.patch b/target/linux/ixp4xx/patches-2.6.26/116-sidewinder_fis_location.patch index da685ef74..19045b05d 100644 --- a/target/linux/ixp4xx/patches-2.6.26/116-sidewinder_fis_location.patch +++ b/target/linux/ixp4xx/patches-2.6.26/116-sidewinder_fis_location.patch @@ -9,7 +9,7 @@ struct fis_image_desc { unsigned char name[16]; // Null terminated name uint32_t flash_base; // Address within FLASH of image -@@ -32,7 +34,8 @@ +@@ -32,7 +34,8 @@ struct fis_list { struct fis_list *next; }; @@ -19,7 +19,7 @@ module_param(directory, int, 0); static inline int redboot_checksum(struct fis_image_desc *img) -@@ -61,6 +64,8 @@ +@@ -61,6 +64,8 @@ static int parse_redboot_partitions(stru #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED static char nullstring[] = "unallocated"; #endif diff --git a/target/linux/ixp4xx/patches-2.6.26/120-compex_support.patch b/target/linux/ixp4xx/patches-2.6.26/120-compex_support.patch index f53ad8233..c4abf7fda 100644 --- a/target/linux/ixp4xx/patches-2.6.26/120-compex_support.patch +++ b/target/linux/ixp4xx/patches-2.6.26/120-compex_support.patch @@ -15,7 +15,7 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org> --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig -@@ -89,6 +89,14 @@ +@@ -89,6 +89,14 @@ config MACH_SIDEWINDER Engineering Sidewinder board. For more information on this platform, see http://www.adiengineering.com @@ -32,7 +32,7 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org> help --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile -@@ -19,6 +19,7 @@ +@@ -19,6 +19,7 @@ obj-pci-$(CONFIG_MACH_WG302V2) += wg302 obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o obj-pci-$(CONFIG_MACH_PRONGHORN) += pronghorn-pci.o obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o @@ -40,7 +40,7 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org> obj-y += common.o -@@ -36,6 +37,7 @@ +@@ -36,6 +37,7 @@ obj-$(CONFIG_MACH_WG302V2) += wg302v2-se obj-$(CONFIG_MACH_FSG) += fsg-setup.o obj-$(CONFIG_MACH_PRONGHORN) += pronghorn-setup.o obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o @@ -189,7 +189,7 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org> +MACHINE_END --- a/arch/arm/mach-ixp4xx/ixdp425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c -@@ -66,7 +66,8 @@ +@@ -66,7 +66,8 @@ struct hw_pci ixdp425_pci __initdata = { int __init ixdp425_pci_init(void) { if (machine_is_ixdp425() || machine_is_ixcdp1100() || @@ -201,7 +201,7 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org> } --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types -@@ -1276,7 +1276,7 @@ +@@ -1276,7 +1276,7 @@ oiab MACH_OIAB OIAB 1269 smdk6400 MACH_SMDK6400 SMDK6400 1270 nokia_n800 MACH_NOKIA_N800 NOKIA_N800 1271 greenphone MACH_GREENPHONE GREENPHONE 1272 diff --git a/target/linux/ixp4xx/patches-2.6.26/130-wrt300nv2_support.patch b/target/linux/ixp4xx/patches-2.6.26/130-wrt300nv2_support.patch index 713986dc5..7917240a6 100644 --- a/target/linux/ixp4xx/patches-2.6.26/130-wrt300nv2_support.patch +++ b/target/linux/ixp4xx/patches-2.6.26/130-wrt300nv2_support.patch @@ -1,6 +1,6 @@ --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig -@@ -97,6 +97,14 @@ +@@ -97,6 +97,14 @@ config MACH_COMPEX WP18 or NP18A boards. For more information on this platform, see http://www.compex.com.sg/home/OEM/product_ap.htm @@ -17,7 +17,7 @@ help --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile -@@ -20,6 +20,7 @@ +@@ -20,6 +20,7 @@ obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o obj-pci-$(CONFIG_MACH_PRONGHORN) += pronghorn-pci.o obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o @@ -25,7 +25,7 @@ obj-y += common.o -@@ -38,6 +39,7 @@ +@@ -38,6 +39,7 @@ obj-$(CONFIG_MACH_FSG) += fsg-setup.o obj-$(CONFIG_MACH_PRONGHORN) += pronghorn-setup.o obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o obj-$(CONFIG_MACH_COMPEX) += compex-setup.o @@ -214,7 +214,7 @@ +#endif --- a/include/asm-arm/arch-ixp4xx/uncompress.h +++ b/include/asm-arm/arch-ixp4xx/uncompress.h -@@ -42,7 +42,7 @@ +@@ -42,7 +42,7 @@ static __inline__ void __arch_decomp_set */ if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2() || diff --git a/target/linux/ixp4xx/patches-2.6.26/131-wrt300nv2_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.26/131-wrt300nv2_mac_plat_info.patch index f199fc9b9..3ab68c4f3 100644 --- a/target/linux/ixp4xx/patches-2.6.26/131-wrt300nv2_mac_plat_info.patch +++ b/target/linux/ixp4xx/patches-2.6.26/131-wrt300nv2_mac_plat_info.patch @@ -1,6 +1,6 @@ --- a/arch/arm/mach-ixp4xx/wrt300nv2-setup.c +++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c -@@ -76,9 +76,36 @@ +@@ -76,9 +76,36 @@ static struct platform_device wrt300nv2_ .resource = &wrt300nv2_uart_resource, }; diff --git a/target/linux/ixp4xx/patches-2.6.26/150-lanready_ap1000_support.patch b/target/linux/ixp4xx/patches-2.6.26/150-lanready_ap1000_support.patch index 16f6f012e..0721658a3 100644 --- a/target/linux/ixp4xx/patches-2.6.26/150-lanready_ap1000_support.patch +++ b/target/linux/ixp4xx/patches-2.6.26/150-lanready_ap1000_support.patch @@ -154,7 +154,7 @@ +#endif --- a/arch/arm/mach-ixp4xx/ixdp425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c -@@ -67,7 +67,7 @@ +@@ -67,7 +67,7 @@ int __init ixdp425_pci_init(void) { if (machine_is_ixdp425() || machine_is_ixcdp1100() || machine_is_ixdp465() || machine_is_kixrp435() || @@ -165,7 +165,7 @@ } --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig -@@ -105,6 +105,14 @@ +@@ -105,6 +105,14 @@ config MACH_WRT300NV2 WRT300N v2 router. For more information on this platform, see http://openwrt.org @@ -182,7 +182,7 @@ help --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile -@@ -21,6 +21,7 @@ +@@ -21,6 +21,7 @@ obj-pci-$(CONFIG_MACH_PRONGHORN) += pron obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o @@ -190,7 +190,7 @@ obj-y += common.o -@@ -40,6 +41,7 @@ +@@ -40,6 +41,7 @@ obj-$(CONFIG_MACH_PRONGHORN) += pronghor obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o obj-$(CONFIG_MACH_COMPEX) += compex-setup.o obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o diff --git a/target/linux/ixp4xx/patches-2.6.26/151-lanready_ap1000_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.26/151-lanready_ap1000_mac_plat_info.patch index f5c5391cc..a1214d567 100644 --- a/target/linux/ixp4xx/patches-2.6.26/151-lanready_ap1000_mac_plat_info.patch +++ b/target/linux/ixp4xx/patches-2.6.26/151-lanready_ap1000_mac_plat_info.patch @@ -1,6 +1,6 @@ --- a/arch/arm/mach-ixp4xx/ap1000-setup.c +++ b/arch/arm/mach-ixp4xx/ap1000-setup.c -@@ -90,9 +90,37 @@ +@@ -90,9 +90,37 @@ static struct platform_device ap1000_uar .resource = ap1000_uart_resources }; diff --git a/target/linux/ixp4xx/patches-2.6.26/162-wg302v1_mem_fixup.patch b/target/linux/ixp4xx/patches-2.6.26/162-wg302v1_mem_fixup.patch index f2d8fde55..684db4475 100644 --- a/target/linux/ixp4xx/patches-2.6.26/162-wg302v1_mem_fixup.patch +++ b/target/linux/ixp4xx/patches-2.6.26/162-wg302v1_mem_fixup.patch @@ -1,6 +1,6 @@ --- a/arch/arm/mach-ixp4xx/wg302v1-setup.c +++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c -@@ -115,6 +115,36 @@ +@@ -115,6 +115,36 @@ static struct platform_device *wg302v1_d &wg302v1_eth[0], }; @@ -37,7 +37,7 @@ static void __init wg302v1_init(void) { ixp4xx_sys_init(); -@@ -133,6 +163,7 @@ +@@ -133,6 +163,7 @@ MACHINE_START(WG302V1, "Netgear WG302 v1 /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, diff --git a/target/linux/ixp4xx/patches-2.6.26/170-ixdpg425_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.26/170-ixdpg425_mac_plat_info.patch index 1faaa63be..772b697aa 100644 --- a/target/linux/ixp4xx/patches-2.6.26/170-ixdpg425_mac_plat_info.patch +++ b/target/linux/ixp4xx/patches-2.6.26/170-ixdpg425_mac_plat_info.patch @@ -1,6 +1,6 @@ --- a/arch/arm/mach-ixp4xx/coyote-setup.c +++ b/arch/arm/mach-ixp4xx/coyote-setup.c -@@ -73,9 +73,37 @@ +@@ -73,9 +73,37 @@ static struct platform_device coyote_uar .resource = &coyote_uart_resource, }; diff --git a/target/linux/ixp4xx/patches-2.6.26/180-tw5334_support.patch b/target/linux/ixp4xx/patches-2.6.26/180-tw5334_support.patch index 143998511..46198ac64 100644 --- a/target/linux/ixp4xx/patches-2.6.26/180-tw5334_support.patch +++ b/target/linux/ixp4xx/patches-2.6.26/180-tw5334_support.patch @@ -1,6 +1,6 @@ --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig -@@ -158,6 +158,14 @@ +@@ -158,6 +158,14 @@ config ARCH_PRPMC1100 PrPCM1100 Processor Mezanine Module. For more information on this platform, see <file:Documentation/arm/IXP4xx>. @@ -17,7 +17,7 @@ prompt "NAS100D" --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile -@@ -22,6 +22,7 @@ +@@ -22,6 +22,7 @@ obj-pci-$(CONFIG_MACH_SIDEWINDER) += sid obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o @@ -25,7 +25,7 @@ obj-y += common.o -@@ -42,6 +43,7 @@ +@@ -42,6 +43,7 @@ obj-$(CONFIG_MACH_SIDEWINDER) += sidewin obj-$(CONFIG_MACH_COMPEX) += compex-setup.o obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o @@ -272,7 +272,7 @@ +subsys_initcall(tw5334_pci_init); --- a/include/asm-arm/arch-ixp4xx/uncompress.h +++ b/include/asm-arm/arch-ixp4xx/uncompress.h -@@ -42,7 +42,8 @@ +@@ -42,7 +42,8 @@ static __inline__ void __arch_decomp_set */ if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2() || diff --git a/target/linux/ixp4xx/patches-2.6.26/190-cambria_support.patch b/target/linux/ixp4xx/patches-2.6.26/190-cambria_support.patch index 14555b485..5daa93618 100644 --- a/target/linux/ixp4xx/patches-2.6.26/190-cambria_support.patch +++ b/target/linux/ixp4xx/patches-2.6.26/190-cambria_support.patch @@ -1,6 +1,6 @@ --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig -@@ -25,6 +25,14 @@ +@@ -25,6 +25,14 @@ config MACH_AVILA Avila Network Platform. For more information on this platform, see <file:Documentation/arm/IXP4xx>. @@ -15,7 +15,7 @@ config MACH_LOFT bool "Loft" depends on MACH_AVILA -@@ -208,7 +216,7 @@ +@@ -208,7 +216,7 @@ config CPU_IXP46X config CPU_IXP43X bool @@ -26,7 +26,7 @@ config MACH_GTWX5715 --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile -@@ -7,6 +7,7 @@ +@@ -7,6 +7,7 @@ obj-pci-n := obj-pci-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o obj-pci-$(CONFIG_MACH_AVILA) += avila-pci.o @@ -34,7 +34,7 @@ obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o -@@ -28,6 +29,7 @@ +@@ -28,6 +29,7 @@ obj-y += common.o obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-setup.o obj-$(CONFIG_MACH_AVILA) += avila-setup.o diff --git a/target/linux/ixp4xx/patches-2.6.26/191-cambria_optional_uart.patch b/target/linux/ixp4xx/patches-2.6.26/191-cambria_optional_uart.patch index 237c6b3e0..c93e446d4 100644 --- a/target/linux/ixp4xx/patches-2.6.26/191-cambria_optional_uart.patch +++ b/target/linux/ixp4xx/patches-2.6.26/191-cambria_optional_uart.patch @@ -8,7 +8,7 @@ struct cambria_board_info { unsigned char *model; -@@ -105,6 +106,43 @@ +@@ -105,6 +106,43 @@ static struct platform_device cambria_ua .resource = &cambria_uart_resource, }; @@ -52,7 +52,7 @@ static struct resource cambria_pata_resources[] = { { .flags = IORESOURCE_MEM -@@ -287,6 +325,19 @@ +@@ -287,6 +325,19 @@ static void __init cambria_gw23xx_setup( #ifdef CONFIG_SENSORS_EEPROM static void __init cambria_gw2350_setup(void) { @@ -72,7 +72,7 @@ platform_device_register(&cambria_npec_device); platform_device_register(&cambria_npea_device); -@@ -294,10 +345,26 @@ +@@ -294,10 +345,26 @@ static void __init cambria_gw2350_setup( platform_device_register(&cambria_usb1_device); platform_device_register(&cambria_gpio_leds_device); diff --git a/target/linux/ixp4xx/patches-2.6.26/192-cambria_gpio_device.patch b/target/linux/ixp4xx/patches-2.6.26/192-cambria_gpio_device.patch index 157e1f169..a9ade5939 100644 --- a/target/linux/ixp4xx/patches-2.6.26/192-cambria_gpio_device.patch +++ b/target/linux/ixp4xx/patches-2.6.26/192-cambria_gpio_device.patch @@ -1,6 +1,6 @@ --- a/arch/arm/mach-ixp4xx/cambria-setup.c +++ b/arch/arm/mach-ixp4xx/cambria-setup.c -@@ -214,6 +214,21 @@ +@@ -214,6 +214,21 @@ static struct platform_device cambria_gp .dev.platform_data = &cambria_gpio_leds_data, }; @@ -22,7 +22,7 @@ static struct latch_led cambria_latch_leds[] = { { -@@ -337,6 +352,11 @@ +@@ -337,6 +352,11 @@ static void __init cambria_gw2350_setup( cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53FF0000, 0x0fff); cambria_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO4; @@ -34,7 +34,7 @@ platform_device_register(&cambria_optional_uart); platform_device_register(&cambria_npec_device); platform_device_register(&cambria_npea_device); -@@ -363,6 +383,10 @@ +@@ -363,6 +383,10 @@ static void __init cambria_gw2358_setup( cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53F80000, 0x0fff); cambria_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO4; diff --git a/target/linux/ixp4xx/patches-2.6.26/201-npe_driver_print_license_location.patch b/target/linux/ixp4xx/patches-2.6.26/201-npe_driver_print_license_location.patch index a4c031aca..64c179845 100644 --- a/target/linux/ixp4xx/patches-2.6.26/201-npe_driver_print_license_location.patch +++ b/target/linux/ixp4xx/patches-2.6.26/201-npe_driver_print_license_location.patch @@ -1,6 +1,6 @@ --- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c -@@ -592,6 +592,8 @@ +@@ -592,6 +592,8 @@ int npe_load_firmware(struct npe *npe, c npe_reset(npe); #endif diff --git a/target/linux/ixp4xx/patches-2.6.26/202-npe_driver_switch_support.patch b/target/linux/ixp4xx/patches-2.6.26/202-npe_driver_switch_support.patch index f0be25315..8f7541514 100644 --- a/target/linux/ixp4xx/patches-2.6.26/202-npe_driver_switch_support.patch +++ b/target/linux/ixp4xx/patches-2.6.26/202-npe_driver_switch_support.patch @@ -1,6 +1,6 @@ --- a/drivers/net/arm/ixp4xx_eth.c +++ b/drivers/net/arm/ixp4xx_eth.c -@@ -165,14 +165,15 @@ +@@ -165,14 +165,15 @@ struct port { struct net_device *netdev; struct napi_struct napi; struct net_device_stats stat; @@ -18,7 +18,7 @@ }; /* NPE message structure */ -@@ -316,12 +317,13 @@ +@@ -316,12 +317,13 @@ static void mdio_write(struct net_device spin_unlock_irqrestore(&mdio_lock, flags); } @@ -34,7 +34,7 @@ while (cycles < MAX_MII_RESET_RETRIES) { if (!(mdio_read(dev, phy_id, MII_BMCR) & BMCR_RESET)) { -@@ -335,12 +337,12 @@ +@@ -335,12 +337,12 @@ static void phy_reset(struct net_device cycles++; } @@ -50,7 +50,7 @@ __raw_writel(DEFAULT_TX_CNTRL0 & ~TX_CNTRL0_HALFDUPLEX, &port->regs->tx_control[0]); else -@@ -348,7 +350,7 @@ +@@ -348,7 +350,7 @@ static void eth_set_duplex(struct port * &port->regs->tx_control[0]); } @@ -59,7 +59,7 @@ static void phy_check_media(struct port *port, int init) { if (mii_check_media(&port->mii, 1, init)) -@@ -367,7 +369,63 @@ +@@ -367,7 +369,63 @@ static void phy_check_media(struct port } } } @@ -123,7 +123,7 @@ static void mdio_thread(struct work_struct *work) { -@@ -792,9 +850,12 @@ +@@ -792,9 +850,12 @@ static int eth_ioctl(struct net_device * if (!netif_running(dev)) return -EINVAL; @@ -138,7 +138,7 @@ return err; } -@@ -947,7 +1008,8 @@ +@@ -947,7 +1008,8 @@ static int eth_open(struct net_device *d } } @@ -148,7 +148,7 @@ memset(&msg, 0, sizeof(msg)); msg.cmd = NPE_VLAN_SETRXQOSENTRY; -@@ -1107,10 +1169,8 @@ +@@ -1107,10 +1169,8 @@ static int eth_close(struct net_device * printk(KERN_CRIT "%s: unable to disable loopback\n", dev->name); @@ -161,7 +161,7 @@ if (!ports_open) qmgr_disable_irq(TXDONE_QUEUE); -@@ -1120,6 +1180,42 @@ +@@ -1120,6 +1180,42 @@ static int eth_close(struct net_device * return 0; } @@ -204,7 +204,7 @@ static int __devinit eth_init_one(struct platform_device *pdev) { struct port *port; -@@ -1192,20 +1288,7 @@ +@@ -1192,20 +1288,7 @@ static int __devinit eth_init_one(struct __raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control); udelay(50); @@ -228,7 +228,7 @@ return 0; --- a/include/asm-arm/arch-ixp4xx/platform.h +++ b/include/asm-arm/arch-ixp4xx/platform.h -@@ -95,12 +95,15 @@ +@@ -95,12 +95,15 @@ struct sys_timer; #define IXP4XX_ETH_NPEB 0x10 #define IXP4XX_ETH_NPEC 0x20 diff --git a/target/linux/ixp4xx/patches-2.6.26/203-npe_driver_phy_reset_autoneg.patch b/target/linux/ixp4xx/patches-2.6.26/203-npe_driver_phy_reset_autoneg.patch index 699763f51..b6519f034 100644 --- a/target/linux/ixp4xx/patches-2.6.26/203-npe_driver_phy_reset_autoneg.patch +++ b/target/linux/ixp4xx/patches-2.6.26/203-npe_driver_phy_reset_autoneg.patch @@ -1,6 +1,6 @@ --- a/drivers/net/arm/ixp4xx_eth.c +++ b/drivers/net/arm/ixp4xx_eth.c -@@ -322,8 +322,12 @@ +@@ -322,8 +322,12 @@ static void phy_reset(struct net_device struct port *port = netdev_priv(dev); int phy_id = port->mii[idx].phy_id; int cycles = 0; @@ -14,7 +14,7 @@ while (cycles < MAX_MII_RESET_RETRIES) { if (!(mdio_read(dev, phy_id, MII_BMCR) & BMCR_RESET)) { -@@ -331,13 +335,23 @@ +@@ -331,13 +335,23 @@ static void phy_reset(struct net_device printk(KERN_DEBUG "%s: phy_reset() took %i cycles\n", dev->name, cycles); #endif diff --git a/target/linux/ixp4xx/patches-2.6.26/204-npe_driver_ixp43x_support.patch b/target/linux/ixp4xx/patches-2.6.26/204-npe_driver_ixp43x_support.patch index 932fae582..4cefc4427 100644 --- a/target/linux/ixp4xx/patches-2.6.26/204-npe_driver_ixp43x_support.patch +++ b/target/linux/ixp4xx/patches-2.6.26/204-npe_driver_ixp43x_support.patch @@ -12,7 +12,7 @@ Subject: [PATCH] Add support for the ethernet ports on IXP43x --- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c -@@ -575,8 +575,8 @@ +@@ -575,8 +575,8 @@ int npe_load_firmware(struct npe *npe, c for (i = 0; i < image->size; i++) image->data[i] = swab32(image->data[i]); @@ -23,7 +23,7 @@ Subject: [PATCH] Add support for the ethernet ports on IXP43x "IXP42x\n"); goto err; } -@@ -598,7 +598,7 @@ +@@ -598,7 +598,7 @@ int npe_load_firmware(struct npe *npe, c "revision 0x%X:%X\n", (image->id >> 16) & 0xFF, (image->id >> 8) & 0xFF, image->id & 0xFF); @@ -42,7 +42,7 @@ Subject: [PATCH] Add support for the ethernet ports on IXP43x #include <asm/arch/npe.h> #include <asm/arch/qmgr.h> -@@ -1338,12 +1339,16 @@ +@@ -1338,12 +1339,16 @@ static struct platform_driver drv = { static int __init eth_init_module(void) { @@ -65,7 +65,7 @@ Subject: [PATCH] Add support for the ethernet ports on IXP43x return platform_driver_register(&drv); --- a/include/asm-arm/arch-ixp4xx/cpu.h +++ b/include/asm-arm/arch-ixp4xx/cpu.h -@@ -34,6 +34,8 @@ +@@ -34,6 +34,8 @@ static inline u32 ixp4xx_read_feature_bi val &= ~IXP4XX_FEATURE_RESERVED; if (!cpu_is_ixp46x()) val &= ~IXP4XX_FEATURE_IXP46X_ONLY; diff --git a/target/linux/ixp4xx/patches-2.6.26/210-npe_hss.patch b/target/linux/ixp4xx/patches-2.6.26/210-npe_hss.patch index d20ae7254..b75cfc898 100644 --- a/target/linux/ixp4xx/patches-2.6.26/210-npe_hss.patch +++ b/target/linux/ixp4xx/patches-2.6.26/210-npe_hss.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig -@@ -336,6 +336,15 @@ +@@ -336,6 +336,15 @@ config DSCC4_PCI_RST Say Y if your card supports this feature. @@ -18,7 +18,7 @@ ---help--- --- a/drivers/net/wan/Makefile +++ b/drivers/net/wan/Makefile -@@ -42,6 +42,7 @@ +@@ -42,6 +42,7 @@ obj-$(CONFIG_C101) += c101.o obj-$(CONFIG_WANXL) += wanxl.o obj-$(CONFIG_PCI200SYN) += pci200syn.o obj-$(CONFIG_PC300TOO) += pc300too.o diff --git a/target/linux/ixp4xx/patches-2.6.26/294-eeprom_new_notifier.patch b/target/linux/ixp4xx/patches-2.6.26/294-eeprom_new_notifier.patch index 1f4898052..1cf1f9ab0 100644 --- a/target/linux/ixp4xx/patches-2.6.26/294-eeprom_new_notifier.patch +++ b/target/linux/ixp4xx/patches-2.6.26/294-eeprom_new_notifier.patch @@ -9,7 +9,7 @@ /* Addresses to scan */ static const unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54, -@@ -41,26 +43,7 @@ +@@ -41,26 +43,7 @@ static const unsigned short normal_i2c[] /* Insmod parameters */ I2C_CLIENT_INSMOD_1(eeprom); @@ -37,7 +37,7 @@ static int eeprom_attach_adapter(struct i2c_adapter *adapter); static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind); -@@ -197,6 +180,7 @@ +@@ -197,6 +180,7 @@ static int eeprom_detect(struct i2c_adap data->valid = 0; mutex_init(&data->update_lock); data->nature = UNKNOWN; @@ -45,7 +45,7 @@ /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) -@@ -224,6 +208,9 @@ +@@ -224,6 +208,9 @@ static int eeprom_detect(struct i2c_adap if (err) goto exit_detach; @@ -55,7 +55,7 @@ return 0; exit_detach: -@@ -249,6 +236,41 @@ +@@ -249,6 +236,41 @@ static int eeprom_detach_client(struct i return 0; } @@ -173,7 +173,7 @@ +#endif /* _LINUX_EEPROM_H */ --- a/include/linux/notifier.h +++ b/include/linux/notifier.h -@@ -253,5 +253,8 @@ +@@ -253,5 +253,8 @@ extern struct blocking_notifier_head reb #define VT_UPDATE 0x0004 /* A bigger update occurred */ #define VT_PREWRITE 0x0005 /* A char is about to be written to the console */ diff --git a/target/linux/ixp4xx/patches-2.6.26/295-latch_led_driver.patch b/target/linux/ixp4xx/patches-2.6.26/295-latch_led_driver.patch index d1f320f44..93fc7cdeb 100644 --- a/target/linux/ixp4xx/patches-2.6.26/295-latch_led_driver.patch +++ b/target/linux/ixp4xx/patches-2.6.26/295-latch_led_driver.patch @@ -1,6 +1,6 @@ --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig -@@ -117,6 +117,12 @@ +@@ -117,6 +117,12 @@ config LEDS_GPIO outputs. To be useful the particular board must have LEDs and they must be connected to the GPIO lines. @@ -159,7 +159,7 @@ +MODULE_LICENSE("GPL"); --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile -@@ -18,6 +18,7 @@ +@@ -18,6 +18,7 @@ obj-$(CONFIG_LEDS_H1940) += leds-h1940. obj-$(CONFIG_LEDS_COBALT_QUBE) += leds-cobalt-qube.o obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o @@ -169,7 +169,7 @@ obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o --- a/include/linux/leds.h +++ b/include/linux/leds.h -@@ -134,5 +134,18 @@ +@@ -134,5 +134,18 @@ struct gpio_led_platform_data { unsigned long *delay_off); }; diff --git a/target/linux/ixp4xx/patches-2.6.26/296-avila_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.26/296-avila_mac_plat_info.patch index c1c584c61..8ea879fad 100644 --- a/target/linux/ixp4xx/patches-2.6.26/296-avila_mac_plat_info.patch +++ b/target/linux/ixp4xx/patches-2.6.26/296-avila_mac_plat_info.patch @@ -1,6 +1,6 @@ --- a/arch/arm/mach-ixp4xx/avila-setup.c +++ b/arch/arm/mach-ixp4xx/avila-setup.c -@@ -132,6 +132,31 @@ +@@ -132,6 +132,31 @@ static struct platform_device avila_pata .resource = avila_pata_resources, }; @@ -32,7 +32,7 @@ static struct platform_device *avila_devices[] __initdata = { &avila_i2c_gpio, &avila_flash, -@@ -159,6 +184,8 @@ +@@ -159,6 +184,8 @@ static void __init avila_init(void) platform_device_register(&avila_pata); diff --git a/target/linux/ixp4xx/patches-2.6.26/300-avila_fetch_mac.patch b/target/linux/ixp4xx/patches-2.6.26/300-avila_fetch_mac.patch index db25efbea..aef7558dc 100644 --- a/target/linux/ixp4xx/patches-2.6.26/300-avila_fetch_mac.patch +++ b/target/linux/ixp4xx/patches-2.6.26/300-avila_fetch_mac.patch @@ -33,7 +33,7 @@ static struct flash_platform_data avila_flash_data = { .map_name = "cfi_probe", .width = 2, -@@ -163,10 +178,160 @@ +@@ -163,10 +178,160 @@ static struct platform_device *avila_dev &avila_uart }; @@ -194,7 +194,7 @@ avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); avila_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; -@@ -184,9 +349,28 @@ +@@ -184,9 +349,28 @@ static void __init avila_init(void) platform_device_register(&avila_pata); diff --git a/target/linux/ixp4xx/patches-2.6.26/301-avila_led.patch b/target/linux/ixp4xx/patches-2.6.26/301-avila_led.patch index 7a079f537..81e9826bf 100644 --- a/target/linux/ixp4xx/patches-2.6.26/301-avila_led.patch +++ b/target/linux/ixp4xx/patches-2.6.26/301-avila_led.patch @@ -8,7 +8,7 @@ #include <linux/i2c-gpio.h> #include <asm/types.h> -@@ -172,6 +173,72 @@ +@@ -172,6 +173,72 @@ static struct platform_device avila_npec .dev.platform_data = &avila_npec_data, }; @@ -81,7 +81,7 @@ static struct platform_device *avila_devices[] __initdata = { &avila_i2c_gpio, &avila_flash, -@@ -182,6 +249,8 @@ +@@ -182,6 +249,8 @@ static void __init avila_gw23xx_setup(vo { platform_device_register(&avila_npeb_device); platform_device_register(&avila_npec_device); @@ -90,7 +90,7 @@ } #ifdef CONFIG_SENSORS_EEPROM -@@ -189,6 +258,8 @@ +@@ -189,6 +258,8 @@ static void __init avila_gw2342_setup(vo { platform_device_register(&avila_npeb_device); platform_device_register(&avila_npec_device); @@ -99,7 +99,7 @@ } static void __init avila_gw2345_setup(void) -@@ -199,22 +270,30 @@ +@@ -199,22 +270,30 @@ static void __init avila_gw2345_setup(vo avila_npec_data.phy = 5; /* port 5 of the KS8995 switch */ platform_device_register(&avila_npec_device); @@ -130,7 +130,7 @@ } static void __init avila_gw2355_setup(void) -@@ -225,11 +304,29 @@ +@@ -225,11 +304,29 @@ static void __init avila_gw2355_setup(vo avila_npec_data.phy = 16; platform_device_register(&avila_npec_device); diff --git a/target/linux/ixp4xx/patches-2.6.26/302-avila_gpio_device.patch b/target/linux/ixp4xx/patches-2.6.26/302-avila_gpio_device.patch index 53b8b632a..38d9ab2a8 100644 --- a/target/linux/ixp4xx/patches-2.6.26/302-avila_gpio_device.patch +++ b/target/linux/ixp4xx/patches-2.6.26/302-avila_gpio_device.patch @@ -1,6 +1,6 @@ --- a/arch/arm/mach-ixp4xx/avila-setup.c +++ b/arch/arm/mach-ixp4xx/avila-setup.c -@@ -239,10 +239,28 @@ +@@ -239,10 +239,28 @@ static struct platform_device avila_latc .dev.platform_data = &avila_latch_leds_data, }; diff --git a/target/linux/ixp4xx/patches-2.6.26/303-avila_gw23x7_phy_quirk.patch b/target/linux/ixp4xx/patches-2.6.26/303-avila_gw23x7_phy_quirk.patch index ece08fd17..cb54c3411 100644 --- a/target/linux/ixp4xx/patches-2.6.26/303-avila_gw23x7_phy_quirk.patch +++ b/target/linux/ixp4xx/patches-2.6.26/303-avila_gw23x7_phy_quirk.patch @@ -1,6 +1,6 @@ --- a/arch/arm/mach-ixp4xx/avila-setup.c +++ b/arch/arm/mach-ixp4xx/avila-setup.c -@@ -294,6 +294,7 @@ +@@ -294,6 +294,7 @@ static void __init avila_gw2345_setup(vo static void __init avila_gw2347_setup(void) { @@ -8,7 +8,7 @@ platform_device_register(&avila_npeb_device); avila_gpio_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO; -@@ -338,6 +339,7 @@ +@@ -338,6 +339,7 @@ static void __init avila_gw2355_setup(vo static void __init avila_gw2357_setup(void) { @@ -18,7 +18,7 @@ avila_gpio_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO; --- a/drivers/net/arm/ixp4xx_eth.c +++ b/drivers/net/arm/ixp4xx_eth.c -@@ -348,6 +348,14 @@ +@@ -348,6 +348,14 @@ static void phy_reset(struct net_device return; } @@ -35,7 +35,7 @@ bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART); --- a/include/asm-arm/arch-ixp4xx/platform.h +++ b/include/asm-arm/arch-ixp4xx/platform.h -@@ -104,6 +104,8 @@ +@@ -104,6 +104,8 @@ struct eth_plat_info { u8 txreadyq; u8 hwaddr[6]; u32 phy_mask; diff --git a/target/linux/ixp4xx/patches-2.6.26/310-gtwx5717_spi_bus.patch b/target/linux/ixp4xx/patches-2.6.26/310-gtwx5717_spi_bus.patch index 688085291..550b54fd3 100644 --- a/target/linux/ixp4xx/patches-2.6.26/310-gtwx5717_spi_bus.patch +++ b/target/linux/ixp4xx/patches-2.6.26/310-gtwx5717_spi_bus.patch @@ -9,7 +9,7 @@ #include <asm/types.h> #include <asm/setup.h> #include <asm/memory.h> -@@ -121,9 +123,41 @@ +@@ -121,9 +123,41 @@ static struct platform_device gtwx5715_f .resource = >wx5715_flash_resource, }; diff --git a/target/linux/ixp4xx/patches-2.6.26/311-gtwx5717_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.26/311-gtwx5717_mac_plat_info.patch index 90f750e7a..29f329017 100644 --- a/target/linux/ixp4xx/patches-2.6.26/311-gtwx5717_mac_plat_info.patch +++ b/target/linux/ixp4xx/patches-2.6.26/311-gtwx5717_mac_plat_info.patch @@ -1,6 +1,6 @@ --- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c -@@ -154,10 +154,37 @@ +@@ -154,10 +154,37 @@ static struct platform_device gtwx5715_s }, }; diff --git a/target/linux/ixp4xx/patches-2.6.26/312-ixp4xx_pata_optimization.patch b/target/linux/ixp4xx/patches-2.6.26/312-ixp4xx_pata_optimization.patch index 86a1cea9e..d6489a7fb 100644 --- a/target/linux/ixp4xx/patches-2.6.26/312-ixp4xx_pata_optimization.patch +++ b/target/linux/ixp4xx/patches-2.6.26/312-ixp4xx_pata_optimization.patch @@ -63,7 +63,7 @@ dev->xfer_shift = ATA_SHIFT_PIO; dev->flags |= ATA_DFLAG_PIO; } -@@ -48,6 +89,7 @@ +@@ -48,6 +89,7 @@ static unsigned int ixp4xx_mmio_data_xfe unsigned int i; unsigned int words = buflen >> 1; u16 *buf16 = (u16 *) buf; @@ -71,7 +71,7 @@ struct ata_port *ap = dev->link->ap; void __iomem *mmio = ap->ioaddr.data_addr; struct ixp4xx_pata_data *data = ap->host->dev->platform_data; -@@ -55,8 +97,34 @@ +@@ -55,8 +97,34 @@ static unsigned int ixp4xx_mmio_data_xfe /* set the expansion bus in 16bit mode and restore * 8 bit mode after the transaction. */ @@ -108,7 +108,7 @@ /* Transfer multiple of 2 bytes */ if (rw == READ) -@@ -81,8 +149,24 @@ +@@ -81,8 +149,24 @@ static unsigned int ixp4xx_mmio_data_xfe words++; } diff --git a/target/linux/ixp4xx/patches-2.6.26/400-dmabounce.patch b/target/linux/ixp4xx/patches-2.6.26/400-dmabounce.patch index 8d2b4c7a7..2fc1890c8 100644 --- a/target/linux/ixp4xx/patches-2.6.26/400-dmabounce.patch +++ b/target/linux/ixp4xx/patches-2.6.26/400-dmabounce.patch @@ -1,6 +1,6 @@ --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c -@@ -117,6 +117,10 @@ +@@ -117,6 +117,10 @@ alloc_safe_buffer(struct dmabounce_devic } else if (size <= device_info->large.size) { pool = &device_info->large; } else { @@ -13,7 +13,7 @@ --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig -@@ -244,6 +244,11 @@ +@@ -244,6 +244,11 @@ config DMABOUNCE default y depends on PCI diff --git a/target/linux/ixp4xx/patches-2.6.26/500-usr8200_support.patch b/target/linux/ixp4xx/patches-2.6.26/500-usr8200_support.patch index 7af073225..b6d5d22ca 100644 --- a/target/linux/ixp4xx/patches-2.6.26/500-usr8200_support.patch +++ b/target/linux/ixp4xx/patches-2.6.26/500-usr8200_support.patch @@ -1,7 +1,5 @@ -Index: linux-2.6.26.5/arch/arm/mach-ixp4xx/Kconfig -=================================================================== ---- linux-2.6.26.5.orig/arch/arm/mach-ixp4xx/Kconfig 2008-10-22 22:31:30.000000000 +0100 -+++ linux-2.6.26.5/arch/arm/mach-ixp4xx/Kconfig 2008-10-22 22:40:55.000000000 +0100 +--- a/arch/arm/mach-ixp4xx/Kconfig ++++ b/arch/arm/mach-ixp4xx/Kconfig @@ -97,6 +97,14 @@ config MACH_SIDEWINDER Engineering Sidewinder board. For more information on this platform, see http://www.adiengineering.com @@ -17,10 +15,8 @@ Index: linux-2.6.26.5/arch/arm/mach-ixp4xx/Kconfig config MACH_COMPEX bool "Compex WP18 / NP18A" select PCI -Index: linux-2.6.26.5/arch/arm/mach-ixp4xx/Makefile -=================================================================== ---- linux-2.6.26.5.orig/arch/arm/mach-ixp4xx/Makefile 2008-10-22 22:31:37.000000000 +0100 -+++ linux-2.6.26.5/arch/arm/mach-ixp4xx/Makefile 2008-10-22 22:49:38.000000000 +0100 +--- a/arch/arm/mach-ixp4xx/Makefile ++++ b/arch/arm/mach-ixp4xx/Makefile @@ -24,6 +24,7 @@ obj-pci-$(CONFIG_MACH_COMPEX) += ixdp42 obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o @@ -37,10 +33,8 @@ Index: linux-2.6.26.5/arch/arm/mach-ixp4xx/Makefile obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o -Index: linux-2.6.26.5/arch/arm/mach-ixp4xx/usr8200-pci.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.26.5/arch/arm/mach-ixp4xx/usr8200-pci.c 2008-10-22 23:37:56.000000000 +0100 +--- /dev/null ++++ b/arch/arm/mach-ixp4xx/usr8200-pci.c @@ -0,0 +1,78 @@ +/* + * arch/arch/mach-ixp4xx/usr8200-pci.c @@ -120,10 +114,8 @@ Index: linux-2.6.26.5/arch/arm/mach-ixp4xx/usr8200-pci.c +} + +subsys_initcall(usr8200_pci_init); -Index: linux-2.6.26.5/arch/arm/mach-ixp4xx/usr8200-setup.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.26.5/arch/arm/mach-ixp4xx/usr8200-setup.c 2008-10-22 23:41:48.000000000 +0100 +--- /dev/null ++++ b/arch/arm/mach-ixp4xx/usr8200-setup.c @@ -0,0 +1,187 @@ +/* + * arch/arm/mach-ixp4xx/usr8200-setup.c @@ -312,10 +304,8 @@ Index: linux-2.6.26.5/arch/arm/mach-ixp4xx/usr8200-setup.c + .boot_params = 0x0100, + .init_machine = usr8200_init, +MACHINE_END -Index: linux-2.6.26.5/include/asm-arm/arch-ixp4xx/uncompress.h -=================================================================== ---- linux-2.6.26.5.orig/include/asm-arm/arch-ixp4xx/uncompress.h 2008-10-22 23:27:33.000000000 +0100 -+++ linux-2.6.26.5/include/asm-arm/arch-ixp4xx/uncompress.h 2008-10-22 23:28:09.000000000 +0100 +--- a/include/asm-arm/arch-ixp4xx/uncompress.h ++++ b/include/asm-arm/arch-ixp4xx/uncompress.h @@ -43,7 +43,7 @@ static __inline__ void __arch_decomp_set if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2() || |