diff options
Diffstat (limited to 'target/linux/ifxmips/patches-2.6.28/110-drivers.patch')
| -rw-r--r-- | target/linux/ifxmips/patches-2.6.28/110-drivers.patch | 152 |
1 files changed, 0 insertions, 152 deletions
diff --git a/target/linux/ifxmips/patches-2.6.28/110-drivers.patch b/target/linux/ifxmips/patches-2.6.28/110-drivers.patch deleted file mode 100644 index 23ceb3cd6..000000000 --- a/target/linux/ifxmips/patches-2.6.28/110-drivers.patch +++ /dev/null @@ -1,152 +0,0 @@ ---- a/drivers/char/Makefile -+++ b/drivers/char/Makefile -@@ -110,6 +110,10 @@ obj-$(CONFIG_PS3_FLASH) += ps3flash.o - obj-$(CONFIG_JS_RTC) += js-rtc.o - js-rtc-y = rtc.o - -+obj-$(CONFIG_IFXMIPS_SSC) += ifxmips_ssc.o -+obj-$(CONFIG_IFXMIPS_EEPROM) += ifxmips_eeprom.o -+obj-$(CONFIG_IFXMIPS_MEI) += ifxmips_mei_core.o -+ - # Files generated that shall be removed upon make clean - clean-files := consolemap_deftbl.c defkeymap.c - ---- a/drivers/mtd/maps/Makefile -+++ b/drivers/mtd/maps/Makefile -@@ -52,6 +52,7 @@ obj-$(CONFIG_MTD_NETtel) += nettel.o - obj-$(CONFIG_MTD_SCB2_FLASH) += scb2_flash.o - obj-$(CONFIG_MTD_H720X) += h720x-flash.o - obj-$(CONFIG_MTD_SBC8240) += sbc8240.o -+obj-$(CONFIG_MTD_IFXMIPS) += ifxmips.o - obj-$(CONFIG_MTD_IXP4XX) += ixp4xx.o - obj-$(CONFIG_MTD_IXP2000) += ixp2000.o - obj-$(CONFIG_MTD_WRSBC8260) += wr_sbc82xx_flash.o ---- a/drivers/net/Kconfig -+++ b/drivers/net/Kconfig -@@ -343,6 +343,12 @@ config MACB - - source "drivers/net/arm/Kconfig" - -+config IFXMIPS_MII0 -+ tristate "Infineon IFXMips eth0 driver" -+ depends on IFXMIPS -+ help -+ Support for the MII0 inside the IFXMips SOC -+ - config AX88796 - tristate "ASIX AX88796 NE2000 clone support" - depends on ARM || MIPS || SUPERH ---- a/drivers/serial/Kconfig -+++ b/drivers/serial/Kconfig -@@ -1304,6 +1304,14 @@ config SERIAL_OF_PLATFORM - Currently, only 8250 compatible ports are supported, but - others can easily be added. - -+config SERIAL_IFXMIPS -+ bool "IFXMips serial driver" -+ depends on IFXMIPS -+ select SERIAL_CORE -+ select SERIAL_CORE_CONSOLE -+ help -+ Driver for the ifxmipss built in ASC hardware -+ - config SERIAL_QE - tristate "Freescale QUICC Engine serial port support" - depends on QUICC_ENGINE ---- a/drivers/serial/Makefile -+++ b/drivers/serial/Makefile -@@ -73,3 +73,4 @@ obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_s - obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o - obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o - obj-$(CONFIG_SERIAL_QE) += ucc_uart.o -+obj-$(CONFIG_SERIAL_IFXMIPS) += ifxmips_asc.o ---- a/drivers/watchdog/Makefile -+++ b/drivers/watchdog/Makefile -@@ -106,6 +106,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o - obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o - obj-$(CONFIG_AR7_WDT) += ar7_wdt.o - obj-$(CONFIG_TXX9_WDT) += txx9wdt.o -+obj-$(CONFIG_IFXMIPS_WDT) += ifxmips_wdt.o - - # PARISC Architecture - ---- a/drivers/net/Makefile -+++ b/drivers/net/Makefile -@@ -262,4 +262,4 @@ obj-$(CONFIG_NETXEN_NIC) += netxen/ - obj-$(CONFIG_NIU) += niu.o - obj-$(CONFIG_VIRTIO_NET) += virtio_net.o - obj-$(CONFIG_SFC) += sfc/ -- -+obj-$(CONFIG_IFXMIPS_MII0) += ifxmips_mii0.o ---- a/drivers/crypto/Kconfig -+++ b/drivers/crypto/Kconfig -@@ -9,6 +9,9 @@ menuconfig CRYPTO_HW - If you say N, all options in this submenu will be skipped and disabled. - - if CRYPTO_HW -+config CRYPTO_DEV_IFXMIPS -+ tristate "Support for IFXMIPS Data Encryption Unit" -+ depends on IFXMIPS - - config CRYPTO_DEV_PADLOCK - tristate "Support for VIA PadLock ACE" ---- a/drivers/crypto/Makefile -+++ b/drivers/crypto/Makefile -@@ -4,3 +4,4 @@ obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode- - obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o - obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o - obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4xx_crypto.o -+obj-$(CONFIG_CRYPTO_DEV_IFXMIPS) += ifxdeu-aes.o ifxdeu-des.o ifxdeu-dma.o ifxdeu-generic.o ifxdeu-md5.o ifxdeu-sha1.o ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -321,3 +321,10 @@ config USB_HWA_HCD - - To compile this driver a module, choose M here: the module - will be called "hwa-hc". -+ -+config USB_DWC_HCD -+ tristate "IFXMIPS USB Host Controller Driver" -+ depends on USB && IFXMIPS -+ default y -+ help -+ Danube USB Host Controller ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -171,6 +171,12 @@ config LEDS_DA903X - This option enables support for on-chip LED drivers found - on Dialog Semiconductor DA9030/DA9034 PMICs. - -+config LEDS_IFXMIPS -+ tristate "LED Support for IFXMIPS LEDs" -+ depends on LEDS_CLASS && IFXMIPS -+ help -+ This option enables support for the IFXMIPS LEDs. -+ - comment "LED Triggers" - - config LEDS_TRIGGERS ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -24,6 +24,7 @@ obj-$(CONFIG_LEDS_FSG) += leds-fsg.o - obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o - obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o - obj-$(CONFIG_LEDS_HP_DISK) += leds-hp-disk.o -+obj-$(CONFIG_LEDS_IFXMIPS) += leds-ifxmips.o - - # LED Triggers - obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o ---- a/drivers/watchdog/Kconfig -+++ b/drivers/watchdog/Kconfig -@@ -747,6 +747,12 @@ config TXX9_WDT - help - Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs. - -+config IFXMIPS_WDT -+ bool "IFXMips watchdog" -+ depends on IFXMIPS -+ help -+ Hardware driver for the IFXMIPS Watchdog Timer. -+ - # PARISC Architecture - - # POWERPC Architecture |