diff options
Diffstat (limited to 'target/linux/generic/patches-3.8/020-ssb_update.patch')
| -rw-r--r-- | target/linux/generic/patches-3.8/020-ssb_update.patch | 1476 |
1 files changed, 1476 insertions, 0 deletions
diff --git a/target/linux/generic/patches-3.8/020-ssb_update.patch b/target/linux/generic/patches-3.8/020-ssb_update.patch new file mode 100644 index 000000000..a1b4a1fef --- /dev/null +++ b/target/linux/generic/patches-3.8/020-ssb_update.patch @@ -0,0 +1,1476 @@ +--- a/drivers/ssb/Kconfig ++++ b/drivers/ssb/Kconfig +@@ -136,6 +136,11 @@ config SSB_DRIVER_MIPS + + If unsure, say N + ++config SSB_SFLASH ++ bool "SSB serial flash support" ++ depends on SSB_DRIVER_MIPS && BROKEN ++ default y ++ + # Assumption: We are on embedded, if we compile the MIPS core. + config SSB_EMBEDDED + bool +--- a/drivers/ssb/Makefile ++++ b/drivers/ssb/Makefile +@@ -11,6 +11,7 @@ ssb-$(CONFIG_SSB_SDIOHOST) += sdio.o + # built-in drivers + ssb-y += driver_chipcommon.o + ssb-y += driver_chipcommon_pmu.o ++ssb-$(CONFIG_SSB_SFLASH) += driver_chipcommon_sflash.o + ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o + ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o + ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o +--- a/drivers/ssb/driver_chipcommon.c ++++ b/drivers/ssb/driver_chipcommon.c +@@ -354,7 +354,7 @@ void ssb_chipcommon_init(struct ssb_chip + + if (cc->dev->id.revision >= 11) + cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT); +- ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status); ++ ssb_dbg("chipcommon status is 0x%x\n", cc->status); + + if (cc->dev->id.revision >= 20) { + chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0); +--- a/drivers/ssb/driver_chipcommon_pmu.c ++++ b/drivers/ssb/driver_chipcommon_pmu.c +@@ -110,8 +110,8 @@ static void ssb_pmu0_pllinit_r0(struct s + return; + } + +- ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n", +- (crystalfreq / 1000), (crystalfreq % 1000)); ++ ssb_info("Programming PLL to %u.%03u MHz\n", ++ crystalfreq / 1000, crystalfreq % 1000); + + /* First turn the PLL off. */ + switch (bus->chip_id) { +@@ -138,7 +138,7 @@ static void ssb_pmu0_pllinit_r0(struct s + } + tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST); + if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT) +- ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n"); ++ ssb_emerg("Failed to turn the PLL off!\n"); + + /* Set PDIV in PLL control 0. */ + pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL0); +@@ -249,8 +249,8 @@ static void ssb_pmu1_pllinit_r0(struct s + return; + } + +- ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n", +- (crystalfreq / 1000), (crystalfreq % 1000)); ++ ssb_info("Programming PLL to %u.%03u MHz\n", ++ crystalfreq / 1000, crystalfreq % 1000); + + /* First turn the PLL off. */ + switch (bus->chip_id) { +@@ -275,7 +275,7 @@ static void ssb_pmu1_pllinit_r0(struct s + } + tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST); + if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT) +- ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n"); ++ ssb_emerg("Failed to turn the PLL off!\n"); + + /* Set p1div and p2div. */ + pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0); +@@ -349,9 +349,8 @@ static void ssb_pmu_pll_init(struct ssb_ + case 43222: + break; + default: +- ssb_printk(KERN_ERR PFX +- "ERROR: PLL init unknown for device %04X\n", +- bus->chip_id); ++ ssb_err("ERROR: PLL init unknown for device %04X\n", ++ bus->chip_id); + } + } + +@@ -472,9 +471,8 @@ static void ssb_pmu_resources_init(struc + max_msk = 0xFFFFF; + break; + default: +- ssb_printk(KERN_ERR PFX +- "ERROR: PMU resource config unknown for device %04X\n", +- bus->chip_id); ++ ssb_err("ERROR: PMU resource config unknown for device %04X\n", ++ bus->chip_id); + } + + if (updown_tab) { +@@ -526,8 +524,8 @@ void ssb_pmu_init(struct ssb_chipcommon + pmucap = chipco_read32(cc, SSB_CHIPCO_PMU_CAP); + cc->pmu.rev = (pmucap & SSB_CHIPCO_PMU_CAP_REVISION); + +- ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n", +- cc->pmu.rev, pmucap); ++ ssb_dbg("Found rev %u PMU (capabilities 0x%08X)\n", ++ cc->pmu.rev, pmucap); + + if (cc->pmu.rev == 1) + chipco_mask32(cc, SSB_CHIPCO_PMU_CTL, +@@ -638,9 +636,8 @@ u32 ssb_pmu_get_alp_clock(struct ssb_chi + case 0x5354: + ssb_pmu_get_alp_clock_clk0(cc); + default: +- ssb_printk(KERN_ERR PFX +- "ERROR: PMU alp clock unknown for device %04X\n", +- bus->chip_id); ++ ssb_err("ERROR: PMU alp clock unknown for device %04X\n", ++ bus->chip_id); + return 0; + } + } +@@ -654,9 +651,8 @@ u32 ssb_pmu_get_cpu_clock(struct ssb_chi + /* 5354 chip uses a non programmable PLL of frequency 240MHz */ + return 240000000; + default: +- ssb_printk(KERN_ERR PFX +- "ERROR: PMU cpu clock unknown for device %04X\n", +- bus->chip_id); ++ ssb_err("ERROR: PMU cpu clock unknown for device %04X\n", ++ bus->chip_id); + return 0; + } + } +@@ -669,9 +665,8 @@ u32 ssb_pmu_get_controlclock(struct ssb_ + case 0x5354: + return 120000000; + default: +- ssb_printk(KERN_ERR PFX +- "ERROR: PMU controlclock unknown for device %04X\n", +- bus->chip_id); ++ ssb_err("ERROR: PMU controlclock unknown for device %04X\n", ++ bus->chip_id); + return 0; + } + } +@@ -692,8 +687,23 @@ void ssb_pmu_spuravoid_pllupdate(struct + pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD; + break; + case 43222: +- /* TODO: BCM43222 requires updating PLLs too */ +- return; ++ if (spuravoid == 1) { ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11500008); ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0C000C06); ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x0F600a08); ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000); ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x2001E920); ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888815); ++ } else { ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100008); ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0c000c06); ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x03000a08); ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000); ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x200005c0); ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888855); ++ } ++ pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD; ++ break; + default: + ssb_printk(KERN_ERR PFX + "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n", +--- /dev/null ++++ b/drivers/ssb/driver_chipcommon_sflash.c +@@ -0,0 +1,140 @@ ++/* ++ * Sonics Silicon Backplane ++ * ChipCommon serial flash interface ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include <linux/ssb/ssb.h> ++ ++#include "ssb_private.h" ++ ++struct ssb_sflash_tbl_e { ++ char *name; ++ u32 id; ++ u32 blocksize; ++ u16 numblocks; ++}; ++ ++static struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = { ++ { "M25P20", 0x11, 0x10000, 4, }, ++ { "M25P40", 0x12, 0x10000, 8, }, ++ ++ { "M25P16", 0x14, 0x10000, 32, }, ++ { "M25P32", 0x15, 0x10000, 64, }, ++ { "M25P64", 0x16, 0x10000, 128, }, ++ { "M25FL128", 0x17, 0x10000, 256, }, ++ { 0 }, ++}; ++ ++static struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = { ++ { "SST25WF512", 1, 0x1000, 16, }, ++ { "SST25VF512", 0x48, 0x1000, 16, }, ++ { "SST25WF010", 2, 0x1000, 32, }, ++ { "SST25VF010", 0x49, 0x1000, 32, }, ++ { "SST25WF020", 3, 0x1000, 64, }, ++ { "SST25VF020", 0x43, 0x1000, 64, }, ++ { "SST25WF040", 4, 0x1000, 128, }, ++ { "SST25VF040", 0x44, 0x1000, 128, }, ++ { "SST25VF040B", 0x8d, 0x1000, 128, }, ++ { "SST25WF080", 5, 0x1000, 256, }, ++ { "SST25VF080B", 0x8e, 0x1000, 256, }, ++ { "SST25VF016", 0x41, 0x1000, 512, }, ++ { "SST25VF032", 0x4a, 0x1000, 1024, }, ++ { "SST25VF064", 0x4b, 0x1000, 2048, }, ++ { 0 }, ++}; ++ ++static struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = { ++ { "AT45DB011", 0xc, 256, 512, }, ++ { "AT45DB021", 0x14, 256, 1024, }, ++ { "AT45DB041", 0x1c, 256, 2048, }, ++ { "AT45DB081", 0x24, 256, 4096, }, ++ { "AT45DB161", 0x2c, 512, 4096, }, ++ { "AT45DB321", 0x34, 512, 8192, }, ++ { "AT45DB642", 0x3c, 1024, 8192, }, ++ { 0 }, ++}; ++ ++static void ssb_sflash_cmd(struct ssb_chipcommon *cc, u32 opcode) ++{ ++ int i; ++ chipco_write32(cc, SSB_CHIPCO_FLASHCTL, ++ SSB_CHIPCO_FLASHCTL_START | opcode); ++ for (i = 0; i < 1000; i++) { ++ if (!(chipco_read32(cc, SSB_CHIPCO_FLASHCTL) & ++ SSB_CHIPCO_FLASHCTL_BUSY)) ++ return; ++ cpu_relax(); ++ } ++ pr_err("SFLASH control command failed (timeout)!\n"); ++} ++ ++/* Initialize serial flash access */ ++int ssb_sflash_init(struct ssb_chipcommon *cc) ++{ ++ struct ssb_sflash_tbl_e *e; ++ u32 id, id2; ++ ++ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) { ++ case SSB_CHIPCO_FLASHT_STSER: ++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_DP); ++ ++ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 0); ++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES); ++ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA); ++ ++ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 1); ++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES); ++ id2 = chipco_read32(cc, SSB_CHIPCO_FLASHDATA); ++ ++ switch (id) { ++ case 0xbf: ++ for (e = ssb_sflash_sst_tbl; e->name; e++) { ++ if (e->id == id2) ++ break; ++ } ++ break; ++ case 0x13: ++ return -ENOTSUPP; ++ default: ++ for (e = ssb_sflash_st_tbl; e->name; e++) { ++ if (e->id == id) ++ break; ++ } ++ break; ++ } ++ if (!e->name) { ++ pr_err("Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n", ++ id, id2); ++ return -ENOTSUPP; ++ } ++ ++ break; ++ case SSB_CHIPCO_FLASHT_ATSER: ++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS); ++ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA) & 0x3c; ++ ++ for (e = ssb_sflash_at_tbl; e->name; e++) { ++ if (e->id == id) ++ break; ++ } ++ if (!e->name) { ++ pr_err("Unsupported Atmel serial flash (id: 0x%X)\n", ++ id); ++ return -ENOTSUPP; ++ } ++ ++ break; ++ default: ++ pr_err("Unsupported flash type\n"); ++ return -ENOTSUPP; ++ } ++ ++ pr_info("Found %s serial flash (blocksize: 0x%X, blocks: %d)\n", ++ e->name, e->blocksize, e->numblocks); ++ ++ pr_err("Serial flash support is not implemented yet!\n"); ++ ++ return -ENOTSUPP; ++} +--- a/drivers/ssb/driver_gpio.c ++++ b/drivers/ssb/driver_gpio.c +@@ -74,6 +74,16 @@ static void ssb_gpio_chipco_free(struct + ssb_chipco_gpio_pullup(&bus->chipco, 1 << gpio, 0); + } + ++static int ssb_gpio_chipco_to_irq(struct gpio_chip *chip, unsigned gpio) ++{ ++ struct ssb_bus *bus = ssb_gpio_get_bus(chip); ++ ++ if (bus->bustype == SSB_BUSTYPE_SSB) ++ return ssb_mips_irq(bus->chipco.dev) + 2; ++ else ++ return -EINVAL; ++} ++ + static int ssb_gpio_chipco_init(struct ssb_bus *bus) + { + struct gpio_chip *chip = &bus->gpio; +@@ -86,6 +96,7 @@ static int ssb_gpio_chipco_init(struct s + chip->set = ssb_gpio_chipco_set_value; + chip->direction_input = ssb_gpio_chipco_direction_input; + chip->direction_output = ssb_gpio_chipco_direction_output; ++ chip->to_irq = ssb_gpio_chipco_to_irq; + chip->ngpio = 16; + /* There is just one SoC in one device and its GPIO addresses should be + * deterministic to address them more easily. The other buses could get +@@ -134,6 +145,16 @@ static int ssb_gpio_extif_direction_outp + return 0; + } + ++static int ssb_gpio_extif_to_irq(struct gpio_chip *chip, unsigned gpio) ++{ ++ struct ssb_bus *bus = ssb_gpio_get_bus(chip); ++ ++ if (bus->bustype == SSB_BUSTYPE_SSB) ++ return ssb_mips_irq(bus->extif.dev) + 2; ++ else ++ return -EINVAL; ++} ++ + static int ssb_gpio_extif_init(struct ssb_bus *bus) + { + struct gpio_chip *chip = &bus->gpio; +@@ -144,6 +165,7 @@ static int ssb_gpio_extif_init(struct ss + chip->set = ssb_gpio_extif_set_value; + chip->direction_input = ssb_gpio_extif_direction_input; + chip->direction_output = ssb_gpio_extif_direction_output; ++ chip->to_irq = ssb_gpio_extif_to_irq; + chip->ngpio = 5; + /* There is just one SoC in one device and its GPIO addresses should be + * deterministic to address them more easily. The other buses could get +--- a/drivers/ssb/driver_mipscore.c ++++ b/drivers/ssb/driver_mipscore.c +@@ -10,6 +10,7 @@ + + #include <linux/ssb/ssb.h> + ++#include <linux/mtd/physmap.h> + #include <linux/serial.h> + #include <linux/serial_core.h> + #include <linux/serial_reg.h> +@@ -17,6 +18,25 @@ + + #include "ssb_private.h" + ++static const char *part_probes[] = { "bcm47xxpart", NULL }; ++ ++static struct physmap_flash_data ssb_pflash_data = { ++ .part_probe_types = part_probes, ++}; ++ ++static struct resource ssb_pflash_resource = { ++ .name = "ssb_pflash", ++ .flags = IORESOURCE_MEM, ++}; ++ ++struct platform_device ssb_pflash_dev = { ++ .name = "physmap-flash", ++ .dev = { ++ .platform_data = &ssb_pflash_data, ++ }, ++ .resource = &ssb_pflash_resource, ++ .num_resources = 1, ++}; + + static inline u32 mips_read32(struct ssb_mipscore *mcore, + u16 offset) +@@ -147,21 +167,22 @@ static void set_irq(struct ssb_device *d + irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]); + ssb_write32(mdev, SSB_IPSFLAG, irqflag); + } +- ssb_dprintk(KERN_INFO PFX +- "set_irq: core 0x%04x, irq %d => %d\n", +- dev->id.coreid, oldirq+2, irq+2); ++ ssb_dbg("set_irq: core 0x%04x, irq %d => %d\n", ++ dev->id.coreid, oldirq+2, irq+2); + } + + static void print_irq(struct ssb_device *dev, unsigned int irq) + { +- int i; + static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; +- ssb_dprintk(KERN_INFO PFX +- "core 0x%04x, irq :", dev->id.coreid); +- for (i = 0; i <= 6; i++) { +- ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" "); +- } +- ssb_dprintk("\n"); ++ ssb_dbg("core 0x%04x, irq : %s%s %s%s %s%s %s%s %s%s %s%s %s%s\n", ++ dev->id.coreid, ++ irq_name[0], irq == 0 ? "*" : " ", ++ irq_name[1], irq == 1 ? "*" : " ", ++ irq_name[2], irq == 2 ? "*" : " ", ++ irq_name[3], irq == 3 ? "*" : " ", ++ irq_name[4], irq == 4 ? "*" : " ", ++ irq_name[5], irq == 5 ? "*" : " ", ++ irq_name[6], irq == 6 ? "*" : " "); + } + + static void dump_irq(struct ssb_bus *bus) +@@ -189,34 +210,43 @@ static void ssb_mips_serial_init(struct + static void ssb_mips_flash_detect(struct ssb_mipscore *mcore) + { + struct ssb_bus *bus = mcore->dev->bus; ++ struct ssb_pflash *pflash = &mcore->pflash; + + /* When there is no chipcommon on the bus there is 4MB flash */ + if (!ssb_chipco_available(&bus->chipco)) { +- mcore->pflash.present = true; +- mcore->pflash.buswidth = 2; +- mcore->pflash.window = SSB_FLASH1; +- mcore->pflash.window_size = SSB_FLASH1_SZ; +- return; ++ pflash->present = true; ++ pflash->buswidth = 2; ++ pflash->window = SSB_FLASH1; ++ pflash->window_size = SSB_FLASH1_SZ; ++ goto ssb_pflash; + } + + /* There is ChipCommon, so use it to read info about flash */ + switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) { + case SSB_CHIPCO_FLASHT_STSER: + case SSB_CHIPCO_FLASHT_ATSER: +- pr_err("Serial flash not supported\n"); ++ pr_debug("Found serial flash\n"); ++ ssb_sflash_init(&bus->chipco); + break; + case SSB_CHIPCO_FLASHT_PARA: + pr_debug("Found parallel flash\n"); +- mcore->pflash.present = true; +- mcore->pflash.window = SSB_FLASH2; +- mcore->pflash.window_size = SSB_FLASH2_SZ; ++ pflash->present = true; ++ pflash->window = SSB_FLASH2; ++ pflash->window_size = SSB_FLASH2_SZ; + if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG) + & SSB_CHIPCO_CFG_DS16) == 0) +- mcore->pflash.buswidth = 1; ++ pflash->buswidth = 1; + else +- mcore->pflash.buswidth = 2; ++ pflash->buswidth = 2; + break; + } ++ ++ssb_pflash: ++ if (pflash->present) { ++ ssb_pflash_data.width = pflash->buswidth; ++ ssb_pflash_resource.start = pflash->window; ++ ssb_pflash_resource.end = pflash->window + pflash->window_size; ++ } + } + + u32 ssb_cpu_clock(struct ssb_mipscore *mcore) +@@ -257,7 +287,7 @@ void ssb_mipscore_init(struct ssb_mipsco + if (!mcore->dev) + return; /* We don't have a MIPS core */ + +- ssb_dprintk(KERN_INFO PFX "Initializing MIPS core...\n"); ++ ssb_dbg("Initializing MIPS core...\n"); + + bus = mcore->dev->bus; + hz = ssb_clockspeed(bus); +@@ -305,7 +335,7 @@ void ssb_mipscore_init(struct ssb_mipsco + break; + } + } +- ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n"); ++ ssb_dbg("after irq reconfiguration\n"); + dump_irq(bus); + + ssb_mips_serial_init(mcore); +--- a/drivers/ssb/driver_pcicore.c ++++ b/drivers/ssb/driver_pcicore.c +@@ -263,8 +263,7 @@ int ssb_pcicore_plat_dev_init(struct pci + return -ENODEV; + } + +- ssb_printk(KERN_INFO "PCI: Fixing up device %s\n", +- pci_name(d)); ++ ssb_info("PCI: Fixing up device %s\n", pci_name(d)); + + /* Fix up interrupt lines */ + d->irq = ssb_mips_irq(extpci_core->dev) + 2; +@@ -285,12 +284,12 @@ static void ssb_pcicore_fixup_pcibridge( + if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0) + return; + +- ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev)); ++ ssb_info("PCI: Fixing up bridge %s\n", pci_name(dev)); + + /* Enable PCI bridge bus mastering and memory space */ + pci_set_master(dev); + if (pcibios_enable_device(dev, ~0) < 0) { +- ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n"); ++ ssb_err("PCI: SSB bridge enable failed\n"); + return; + } + +@@ -299,8 +298,8 @@ static void ssb_pcicore_fixup_pcibridge( + + /* Make sure our latency is high enough to handle the devices behind us */ + lat = 168; +- ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n", +- pci_name(dev), lat); ++ ssb_info("PCI: Fixing latency timer of device %s to %u\n", ++ pci_name(dev), lat); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); + } + DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge); +@@ -323,7 +322,7 @@ static void ssb_pcicore_init_hostmode(st + return; + extpci_core = pc; + +- ssb_dprintk(KERN_INFO PFX "PCIcore in host mode found\n"); ++ ssb_dbg("PCIcore in host mode found\n"); + /* Reset devices on the external PCI bus */ + val = SSB_PCICORE_CTL_RST_OE; + val |= SSB_PCICORE_CTL_CLK_OE; +@@ -338,7 +337,7 @@ static void ssb_pcicore_init_hostmode(st + udelay(1); /* Assertion time demanded by the PCI standard */ + + if (pc->dev->bus->has_cardbus_slot) { +- ssb_dprintk(KERN_INFO PFX "CardBus slot detected\n"); ++ ssb_dbg("CardBus slot detected\n"); + pc->cardbusmode = 1; + /* GPIO 1 resets the bridge */ + ssb_gpio_out(pc->dev->bus, 1, 1); +--- a/drivers/ssb/embedded.c ++++ b/drivers/ssb/embedded.c +@@ -57,9 +57,8 @@ int ssb_watchdog_register(struct ssb_bus + bus->busnumber, &wdt, + sizeof(wdt)); + if (IS_ERR(pdev)) { +- ssb_dprintk(KERN_INFO PFX +- "can not register watchdog device, err: %li\n", +- PTR_ERR(pdev)); ++ ssb_dbg("can not register watchdog device, err: %li\n", ++ PTR_ERR(pdev)); + return PTR_ERR(pdev); + } + +--- a/drivers/ssb/main.c ++++ b/drivers/ssb/main.c +@@ -275,8 +275,8 @@ int ssb_devices_thaw(struct ssb_freeze_c + + err = sdrv->probe(sdev, &sdev->id); + if (err) { +- ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n", +- dev_name(sdev->dev)); ++ ssb_err("Failed to thaw device %s\n", ++ dev_name(sdev->dev)); + result = err; + } + ssb_device_put(sdev); +@@ -447,10 +447,9 @@ void ssb_bus_unregister(struct ssb_bus * + + err = ssb_gpio_unregister(bus); + if (err == -EBUSY) +- ssb_dprintk(KERN_ERR PFX "Some GPIOs are still in use.\n"); ++ ssb_dbg("Some GPIOs are still in use\n"); + else if (err) +- ssb_dprintk(KERN_ERR PFX +- "Can not unregister GPIO driver: %i\n", err); ++ ssb_dbg("Can not unregister GPIO driver: %i\n", err); + + ssb_buses_lock(); + ssb_devices_unregister(bus); +@@ -497,8 +496,7 @@ static int ssb_devices_register(struct s + + devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL); + if (!devwrap) { +- ssb_printk(KERN_ERR PFX +- "Could not allocate device\n"); ++ ssb_err("Could not allocate device\n"); + err = -ENOMEM; + goto error; + } +@@ -537,9 +535,7 @@ static int ssb_devices_register(struct s + sdev->dev = dev; + err = device_register(dev); + if (err) { +- ssb_printk(KERN_ERR PFX +- "Could not register %s\n", +- dev_name(dev)); ++ ssb_err("Could not register %s\n", dev_name(dev)); + /* Set dev to NULL to not unregister + * dev on error unwinding. */ + sdev->dev = NULL; +@@ -549,6 +545,14 @@ static int ssb_devices_register(struct s + dev_idx++; + } + ++#ifdef CONFIG_SSB_DRIVER_MIPS ++ if (bus->mipscore.pflash.present) { ++ err = platform_device_register(&ssb_pflash_dev); ++ if (err) ++ pr_err("Error registering parallel flash\n"); ++ } ++#endif ++ + return 0; + error: + /* Unwind the already registered devices. */ +@@ -817,10 +821,9 @@ static int ssb_bus_register(struct ssb_b + ssb_mipscore_init(&bus->mipscore); + err = ssb_gpio_init(bus); + if (err == -ENOTSUPP) +- ssb_dprintk(KERN_DEBUG PFX "GPIO driver not activated\n"); ++ ssb_dbg("GPIO driver not activated\n"); + else if (err) +- ssb_dprintk(KERN_ERR PFX +- "Error registering GPIO driver: %i\n", err); ++ ssb_dbg("Error registering GPIO driver: %i\n", err); + err = ssb_fetch_invariants(bus, get_invariants); + if (err) { + ssb_bus_may_powerdown(bus); +@@ -870,11 +873,11 @@ int ssb_bus_pcibus_register(struct ssb_b + + err = ssb_bus_register(bus, ssb_pci_get_invariants, 0); + if (!err) { +- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " +- "PCI device %s\n", dev_name(&host_pci->dev)); ++ ssb_info("Sonics Silicon Backplane found on PCI device %s\n", ++ dev_name(&host_pci->dev)); + } else { +- ssb_printk(KERN_ERR PFX "Failed to register PCI version" +- " of SSB with error %d\n", err); ++ ssb_err("Failed to register PCI version of SSB with error %d\n", ++ err); + } + + return err; +@@ -895,8 +898,8 @@ int ssb_bus_pcmciabus_register(struct ss + + err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr); + if (!err) { +- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " +- "PCMCIA device %s\n", pcmcia_dev->devname); ++ ssb_info("Sonics Silicon Backplane found on PCMCIA device %s\n", ++ pcmcia_dev->devname); + } + + return err; +@@ -917,8 +920,8 @@ int ssb_bus_sdiobus_register(struct ssb_ + + err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0); + if (!err) { +- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " +- "SDIO device %s\n", sdio_func_id(func)); ++ ssb_info("Sonics Silicon Backplane found on SDIO device %s\n", ++ sdio_func_id(func)); + } + + return err; +@@ -936,8 +939,8 @@ int ssb_bus_ssbbus_register(struct ssb_b + + err = ssb_bus_register(bus, get_invariants, baseaddr); + if (!err) { +- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at " +- "address 0x%08lX\n", baseaddr); ++ ssb_info("Sonics Silicon Backplane found at address 0x%08lX\n", ++ baseaddr); + } + + return err; +@@ -1331,7 +1334,7 @@ out: + #endif + return err; + error: +- ssb_printk(KERN_ERR PFX "Bus powerdown failed\n"); ++ ssb_err("Bus powerdown failed\n"); + goto out; + } + EXPORT_SYMBOL(ssb_bus_may_powerdown); +@@ -1354,7 +1357,7 @@ int ssb_bus_powerup(struct ssb_bus *bus, + + return 0; + error: +- ssb_printk(KERN_ERR PFX "Bus powerup failed\n"); ++ ssb_err("Bus powerup failed\n"); + return err; + } + EXPORT_SYMBOL(ssb_bus_powerup); +@@ -1462,15 +1465,13 @@ static int __init ssb_modinit(void) + + err = b43_pci_ssb_bridge_init(); + if (err) { +- ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge " +- "initialization failed\n"); ++ ssb_err("Broadcom 43xx PCI-SSB-bridge initialization failed\n"); + /* don't fail SSB init because of this */ + err = 0; + } + err = ssb_gige_init(); + if (err) { +- ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet " +- "driver initialization failed\n"); ++ ssb_err("SSB Broadcom Gigabit Ethernet driver initialization failed\n"); + /* don't fail SSB init because of this */ + err = 0; + } +--- a/drivers/ssb/pci.c ++++ b/drivers/ssb/pci.c +@@ -56,7 +56,7 @@ int ssb_pci_switch_coreidx(struct ssb_bu + } + return 0; + error: +- ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx); ++ ssb_err("Failed to switch to core %u\n", coreidx); + return -ENODEV; + } + +@@ -67,10 +67,9 @@ int ssb_pci_switch_core(struct ssb_bus * + unsigned long flags; + + #if SSB_VERBOSE_PCICORESWITCH_DEBUG +- ssb_printk(KERN_INFO PFX +- "Switching to %s core, index %d\n", +- ssb_core_name(dev->id.coreid), +- dev->core_index); ++ ssb_info("Switching to %s core, index %d\n", ++ ssb_core_name(dev->id.coreid), ++ dev->core_index); + #endif + + spin_lock_irqsave(&bus->bar_lock, flags); +@@ -231,6 +230,15 @@ static inline u8 ssb_crc8(u8 crc, u8 dat + return t[crc ^ data]; + } + ++static void sprom_get_mac(char *mac, const u16 *in) ++{ ++ int i; ++ for (i = 0; i < 3; i++) { ++ *mac++ = in[i] >> 8; ++ *mac++ = in[i]; ++ } ++} ++ + static u8 ssb_sprom_crc(const u16 *sprom, u16 size) + { + int word; +@@ -278,7 +286,7 @@ static int sprom_do_write(struct ssb_bus + u32 spromctl; + u16 size = bus->sprom_size; + +- ssb_printk(KERN_NOTICE PFX "Writing SPROM. Do NOT turn off the power! Please stand by...\n"); ++ ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n"); + err = pci_read_config_dword(pdev, SSB_SPROMCTL, &spromctl); + if (err) + goto err_ctlreg; +@@ -286,17 +294,17 @@ static int sprom_do_write(struct ssb_bus + err = pci_write_config_dword(pdev, SSB_SPROMCTL, spromctl); + if (err) + goto err_ctlreg; +- ssb_printk(KERN_NOTICE PFX "[ 0%%"); ++ ssb_notice("[ 0%%"); + msleep(500); + for (i = 0; i < size; i++) { + if (i == size / 4) +- ssb_printk("25%%"); ++ ssb_cont("25%%"); + else if (i == size / 2) +- ssb_printk("50%%"); ++ ssb_cont("50%%"); + else if (i == (size * 3) / 4) +- ssb_printk("75%%"); ++ ssb_cont("75%%"); + else if (i % 2) +- ssb_printk("."); ++ ssb_cont("."); + writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2)); + mmiowb(); + msleep(20); +@@ -309,12 +317,12 @@ static int sprom_do_write(struct ssb_bus + if (err) + goto err_ctlreg; + msleep(500); +- ssb_printk("100%% ]\n"); +- ssb_printk(KERN_NOTICE PFX "SPROM written.\n"); ++ ssb_cont("100%% ]\n"); ++ ssb_notice("SPROM written\n"); + + return 0; + err_ctlreg: +- ssb_printk(KERN_ERR PFX "Could not access SPROM control register.\n"); ++ ssb_err("Could not access SPROM control register.\n"); + return err; + } + +@@ -339,10 +347,23 @@ static s8 r123_extract_antgain(u8 sprom_ + return (s8)gain; + } + ++static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in) ++{ ++ SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0); ++ SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0); ++ SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0); ++ SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0); ++ SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0); ++ SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0); ++ SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0); ++ SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0); ++ SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0); ++ SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO, ++ SSB_SPROM2_MAXP_A_LO_SHIFT); ++} ++ + static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in) + { +- int i; +- u16 v; + u16 loc[3]; + + if (out->revision == 3) /* rev 3 moved MAC */ +@@ -352,19 +373,10 @@ static void sprom_extract_r123(struct ss + loc[1] = SSB_SPROM1_ET0MAC; + loc[2] = SSB_SPROM1_ET1MAC; + } +- for (i = 0; i < 3; i++) { +- v = in[SPOFF(loc[0]) + i]; +- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v); +- } ++ sprom_get_mac(out->il0mac, &in[SPOFF(loc[0])]); + if (out->revision < 3) { /* only rev 1-2 have et0, et1 */ +- for (i = 0; i < 3; i++) { +- v = in[SPOFF(loc[1]) + i]; +- *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v); +- } +- for (i = 0; i < 3; i++) { +- v = in[SPOFF(loc[2]) + i]; +- *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v); +- } ++ sprom_get_mac(out->et0mac, &in[SPOFF(loc[1])]); ++ sprom_get_mac(out->et1mac, &in[SPOFF(loc[2])]); + } + SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0); + SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A, +@@ -372,6 +384,7 @@ static void sprom_extract_r123(struct ss + SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14); + SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15); + SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0); ++ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0); + if (out->revision == 1) + SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE, + SSB_SPROM1_BINF_CCODE_SHIFT); +@@ -398,8 +411,7 @@ static void sprom_extract_r123(struct ss + SSB_SPROM1_ITSSI_A_SHIFT); + SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0); + SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0); +- if (out->revision >= 2) +- SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0); ++ + SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8); + SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0); + +@@ -410,6 +422,8 @@ static void sprom_extract_r123(struct ss + out->antenna_gain.a1 = r123_extract_antgain(out->revision, in, + SSB_SPROM1_AGAIN_A, + SSB_SPROM1_AGAIN_A_SHIFT); ++ if (out->revision >= 2) ++ sprom_extract_r23(out, in); + } + + /* Revs 4 5 and 8 have partially shared layout */ +@@ -454,23 +468,20 @@ static void sprom_extract_r458(struct ss + + static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in) + { +- int i; +- u16 v; + u16 il0mac_offset; + + if (out->revision == 4) + il0mac_offset = SSB_SPROM4_IL0MAC; + else + il0mac_offset = SSB_SPROM5_IL0MAC; +- /* extract the MAC address */ +- for (i = 0; i < 3; i++) { +- v = in[SPOFF(il0mac_offset) + i]; +- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v); +- } ++ ++ sprom_get_mac(out->il0mac, &in[SPOFF(il0mac_offset)]); ++ + SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0); + SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A, + SSB_SPROM4_ETHPHY_ET1A_SHIFT); + SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0); ++ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0); + if (out->revision == 4) { + SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8); + SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0); +@@ -530,7 +541,7 @@ static void sprom_extract_r45(struct ssb + static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) + { + int i; +- u16 v, o; ++ u16 o; + u16 pwr_info_offset[] = { + SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, + SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 +@@ -539,11 +550,10 @@ static void sprom_extract_r8(struct ssb_ + ARRAY_SIZE(out->core_pwr_info)); + + /* extract the MAC address */ +- for (i = 0; i < 3; i++) { +- v = in[SPOFF(SSB_SPROM8_IL0MAC) + i]; +- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v); +- } ++ sprom_get_mac(out->il0mac, &in[SPOFF(SSB_SPROM8_IL0MAC)]); ++ + SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0); ++ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0); + SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8); + SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0); + SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0); +@@ -743,7 +753,7 @@ static int sprom_extract(struct ssb_bus + memset(out, 0, sizeof(*out)); + + out->revision = in[size - 1] & 0x00FF; +- ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision); ++ ssb_dbg("SPROM revision %d detected\n", out->revision); + memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */ + memset(out->et1mac, 0xFF, 6); + +@@ -752,7 +762,7 @@ static int sprom_extract(struct ssb_bus + * number stored in the SPROM. + * Always extract r1. */ + out->revision = 1; +- ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision); ++ ssb_dbg("SPROM treated as revision %d\n", out->revision); + } + + switch (out->revision) { +@@ -769,9 +779,8 @@ static int sprom_extract(struct ssb_bus + sprom_extract_r8(out, in); + break; + default: +- ssb_printk(KERN_WARNING PFX "Unsupported SPROM" +- " revision %d detected. Will extract" +- " v1\n", out->revision); ++ ssb_warn("Unsupported SPROM revision %d detected. Will extract v1\n", ++ out->revision); + out->revision = 1; + sprom_extract_r123(out, in); + } +@@ -791,7 +800,7 @@ static int ssb_pci_sprom_get(struct ssb_ + u16 *buf; + + if (!ssb_is_sprom_available(bus)) { +- ssb_printk(KERN_ERR PFX "No SPROM available!\n"); ++ ssb_err("No SPROM available!\n"); + return -ENODEV; + } + if (bus->chipco.dev) { /* can be unavailable! */ +@@ -810,7 +819,7 @@ static int ssb_pci_sprom_get(struct ssb_ + } else { + bus->sprom_offset = SSB_SPROM_BASE1; + } +- ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset); ++ ssb_dbg("SPROM offset is 0x%x\n", bus->sprom_offset); + + buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL); + if (!buf) +@@ -835,18 +844,15 @@ static int ssb_pci_sprom_get(struct ssb_ + * available for this device in some other storage */ + err = ssb_fill_sprom_with_fallback(bus, sprom); + if (err) { +- ssb_printk(KERN_WARNING PFX "WARNING: Using" +- " fallback SPROM failed (err %d)\n", +- err); ++ ssb_warn("WARNING: Using fallback SPROM failed (err %d)\n", ++ err); + } else { +- ssb_dprintk(KERN_DEBUG PFX "Using SPROM" +- " revision %d provided by" +- " platform.\n", sprom->revision); ++ ssb_dbg("Using SPROM revision %d provided by platform\n", ++ sprom->revision); + err = 0; + goto out_free; + } +- ssb_printk(KERN_WARNING PFX "WARNING: Invalid" +- " SPROM CRC (corrupt SPROM)\n"); ++ ssb_warn("WARNING: Invalid SPROM CRC (corrupt SPROM)\n"); + } + } + err = sprom_extract(bus, sprom, buf, bus->sprom_size); +--- a/drivers/ssb/pcmcia.c ++++ b/drivers/ssb/pcmcia.c +@@ -143,7 +143,7 @@ int ssb_pcmcia_switch_coreidx(struct ssb + + return 0; + error: +- ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx); ++ ssb_err("Failed to switch to core %u\n", coreidx); + return err; + } + +@@ -153,10 +153,9 @@ int ssb_pcmcia_switch_core(struct ssb_bu + int err; + + #if SSB_VERBOSE_PCMCIACORESWITCH_DEBUG +- ssb_printk(KERN_INFO PFX +- "Switching to %s core, index %d\n", +- ssb_core_name(dev->id.coreid), +- dev->core_index); ++ ssb_info("Switching to %s core, index %d\n", ++ ssb_core_name(dev->id.coreid), ++ dev->core_index); + #endif + + err = ssb_pcmcia_switch_coreidx(bus, dev->core_index); +@@ -192,7 +191,7 @@ int ssb_pcmcia_switch_segment(struct ssb + + return 0; + error: +- ssb_printk(KERN_ERR PFX "Failed to switch pcmcia segment\n"); ++ ssb_err("Failed to switch pcmcia segment\n"); + return err; + } + +@@ -549,44 +548,39 @@ static int ssb_pcmcia_sprom_write_all(st + bool failed = 0; + size_t size = SSB_PCMCIA_SPROM_SIZE; + +- ssb_printk(KERN_NOTICE PFX +- "Writing SPROM. Do NOT turn off the power! " +- "Please stand by...\n"); ++ ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n"); + err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEEN); + if (err) { +- ssb_printk(KERN_NOTICE PFX +- "Could not enable SPROM write access.\n"); ++ ssb_notice("Could not enable SPROM write access\n"); + return -EBUSY; + } +- ssb_printk(KERN_NOTICE PFX "[ 0%%"); ++ ssb_notice("[ 0%%"); + msleep(500); + for (i = 0; i < size; i++) { + if (i == size / 4) +- ssb_printk("25%%"); ++ ssb_cont("25%%"); + else if (i == size / 2) +- ssb_printk("50%%"); ++ ssb_cont("50%%"); + else if (i == (size * 3) / 4) +- ssb_printk("75%%"); ++ ssb_cont("75%%"); + else if (i % 2) +- ssb_printk("."); ++ ssb_cont("."); + err = ssb_pcmcia_sprom_write(bus, i, sprom[i]); + if (err) { +- ssb_printk(KERN_NOTICE PFX +- "Failed to write to SPROM.\n"); ++ ssb_notice("Failed to write to SPROM\n"); + failed = 1; + break; + } + } + err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS); + if (err) { +- ssb_printk(KERN_NOTICE PFX +- "Could not disable SPROM write access.\n"); ++ ssb_notice("Could not disable SPROM write access\n"); + failed = 1; + } + msleep(500); + if (!failed) { +- ssb_printk("100%% ]\n"); +- ssb_printk(KERN_NOTICE PFX "SPROM written.\n"); ++ ssb_cont("100%% ]\n"); ++ ssb_notice("SPROM written\n"); + } + + return failed ? -EBUSY : 0; +@@ -700,7 +694,7 @@ static int ssb_pcmcia_do_get_invariants( + return -ENOSPC; /* continue with next entry */ + + error: +- ssb_printk(KERN_ERR PFX ++ ssb_err( + "PCMCIA: Failed to fetch device invariants: %s\n", + error_description); + return -ENODEV; +@@ -722,7 +716,7 @@ int ssb_pcmcia_get_invariants(struct ssb + res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE, + ssb_pcmcia_get_mac, sprom); + if (res != 0) { +- ssb_printk(KERN_ERR PFX ++ ssb_err( + "PCMCIA: Failed to fetch MAC address\n"); + return -ENODEV; + } +@@ -733,7 +727,7 @@ int ssb_pcmcia_get_invariants(struct ssb + if ((res == 0) || (res == -ENOSPC)) + return 0; + +- ssb_printk(KERN_ERR PFX ++ ssb_err( + "PCMCIA: Failed to fetch device invariants\n"); + return -ENODEV; + } +@@ -843,6 +837,6 @@ int ssb_pcmcia_init(struct ssb_bus *bus) + + return 0; + error: +- ssb_printk(KERN_ERR PFX "Failed to initialize PCMCIA host device\n"); ++ ssb_err("Failed to initialize PCMCIA host device\n"); + return err; + } +--- a/drivers/ssb/scan.c ++++ b/drivers/ssb/scan.c +@@ -125,8 +125,7 @@ static u16 pcidev_to_chipid(struct pci_d + chipid_fallback = 0x4401; + break; + default: +- ssb_printk(KERN_ERR PFX +- "PCI-ID not in fallback list\n"); ++ ssb_err("PCI-ID not in fallback list\n"); + } + + return chipid_fallback; +@@ -152,8 +151,7 @@ static u8 chipid_to_nrcores(u16 chipid) + case 0x4704: + return 9; + default: +- ssb_printk(KERN_ERR PFX +- "CHIPID not in nrcores fallback list\n"); ++ ssb_err("CHIPID not in nrcores fallback list\n"); + } + + return 1; +@@ -320,15 +318,13 @@ int ssb_bus_scan(struct ssb_bus *bus, + bus->chip_package = 0; + } + } +- ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and " +- "package 0x%02X\n", bus->chip_id, bus->chip_rev, +- bus->chip_package); ++ ssb_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n", ++ bus->chip_id, bus->chip_rev, bus->chip_package); + if (!bus->nr_devices) + bus->nr_devices = chipid_to_nrcores(bus->chip_id); + if (bus->nr_devices > ARRAY_SIZE(bus->devices)) { +- ssb_printk(KERN_ERR PFX +- "More than %d ssb cores found (%d)\n", +- SSB_MAX_NR_CORES, bus->nr_devices); ++ ssb_err("More than %d ssb cores found (%d)\n", ++ SSB_MAX_NR_CORES, bus->nr_devices); + goto err_unmap; + } + if (bus->bustype == SSB_BUSTYPE_SSB) { +@@ -370,8 +366,7 @@ int ssb_bus_scan(struct ssb_bus *bus, + nr_80211_cores++; + if (nr_80211_cores > 1) { + if (!we_support_multiple_80211_cores(bus)) { +- ssb_dprintk(KERN_INFO PFX "Ignoring additional " +- "802.11 core\n"); ++ ssb_dbg("Ignoring additional 802.11 core\n"); + continue; + } + } +@@ -379,8 +374,7 @@ int ssb_bus_scan(struct ssb_bus *bus, + case SSB_DEV_EXTIF: + #ifdef CONFIG_SSB_DRIVER_EXTIF + if (bus->extif.dev) { +- ssb_printk(KERN_WARNING PFX +- "WARNING: Multiple EXTIFs found\n"); ++ ssb_warn("WARNING: Multiple EXTIFs found\n"); + break; + } + bus->extif.dev = dev; +@@ -388,8 +382,7 @@ int ssb_bus_scan(struct ssb_bus *bus, + break; + case SSB_DEV_CHIPCOMMON: + if (bus->chipco.dev) { +- ssb_printk(KERN_WARNING PFX +- "WARNING: Multiple ChipCommon found\n"); ++ ssb_warn("WARNING: Multiple ChipCommon found\n"); + break; + } + bus->chipco.dev = dev; +@@ -398,8 +391,7 @@ int ssb_bus_scan(struct ssb_bus *bus, + case SSB_DEV_MIPS_3302: + #ifdef CONFIG_SSB_DRIVER_MIPS + if (bus->mipscore.dev) { +- ssb_printk(KERN_WARNING PFX +- "WARNING: Multiple MIPS cores found\n"); ++ ssb_warn("WARNING: Multiple MIPS cores found\n"); + break; + } + bus->mipscore.dev = dev; +@@ -420,8 +412,7 @@ int ssb_bus_scan(struct ssb_bus *bus, + } + } + if (bus->pcicore.dev) { +- ssb_printk(KERN_WARNING PFX +- "WARNING: Multiple PCI(E) cores found\n"); ++ ssb_warn("WARNING: Multiple PCI(E) cores found\n"); + break; + } + bus->pcicore.dev = dev; +--- a/drivers/ssb/sprom.c ++++ b/drivers/ssb/sprom.c +@@ -127,13 +127,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_ + goto out_kfree; + err = ssb_devices_freeze(bus, &freeze); + if (err) { +- ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n"); ++ ssb_err("SPROM write: Could not freeze all devices\n"); + goto out_unlock; + } + res = sprom_write(bus, sprom); + err = ssb_devices_thaw(&freeze); + if (err) +- ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n"); ++ ssb_err("SPROM write: Could not thaw all devices\n"); + out_unlock: + mutex_unlock(&bus->sprom_mutex); + out_kfree: +--- a/drivers/ssb/ssb_private.h ++++ b/drivers/ssb/ssb_private.h +@@ -9,16 +9,27 @@ + #define PFX "ssb: " + + #ifdef CONFIG_SSB_SILENT +-# define ssb_printk(fmt, x...) do { /* nothing */ } while (0) ++# define ssb_printk(fmt, ...) \ ++ do { if (0) printk(fmt, ##__VA_ARGS__); } while (0) + #else +-# define ssb_printk printk ++# define ssb_printk(fmt, ...) \ ++ printk(fmt, ##__VA_ARGS__) + #endif /* CONFIG_SSB_SILENT */ + ++#define ssb_emerg(fmt, ...) ssb_printk(KERN_EMERG PFX fmt, ##__VA_ARGS__) ++#define ssb_err(fmt, ...) ssb_printk(KERN_ERR PFX fmt, ##__VA_ARGS__) ++#define ssb_warn(fmt, ...) ssb_printk(KERN_WARNING PFX fmt, ##__VA_ARGS__) ++#define ssb_notice(fmt, ...) ssb_printk(KERN_NOTICE PFX fmt, ##__VA_ARGS__) ++#define ssb_info(fmt, ...) ssb_printk(KERN_INFO PFX fmt, ##__VA_ARGS__) ++#define ssb_cont(fmt, ...) ssb_printk(KERN_CONT fmt, ##__VA_ARGS__) ++ + /* dprintk: Debugging printk; vanishes for non-debug compilation */ + #ifdef CONFIG_SSB_DEBUG +-# define ssb_dprintk(fmt, x...) ssb_printk(fmt , ##x) ++# define ssb_dbg(fmt, ...) \ ++ ssb_printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__) + #else +-# define ssb_dprintk(fmt, x...) do { /* nothing */ } while (0) ++# define ssb_dbg(fmt, ...) \ ++ do { if (0) printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__); } while (0) + #endif + + #ifdef CONFIG_SSB_DEBUG +@@ -217,6 +228,21 @@ extern u32 ssb_chipco_watchdog_timer_set + u32 ticks); + extern u32 ssb_chipco_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms); + ++/* driver_chipcommon_sflash.c */ ++#ifdef CONFIG_SSB_SFLASH ++int ssb_sflash_init(struct ssb_chipcommon *cc); ++#else ++static inline int ssb_sflash_init(struct ssb_chipcommon *cc) ++{ ++ pr_err("Serial flash not supported\n"); ++ return 0; ++} ++#endif /* CONFIG_SSB_SFLASH */ ++ ++#ifdef CONFIG_SSB_DRIVER_MIPS ++extern struct platform_device ssb_pflash_dev; ++#endif ++ + #ifdef CONFIG_SSB_DRIVER_EXTIF + extern u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks); + extern u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms); +--- a/include/linux/ssb/ssb.h ++++ b/include/linux/ssb/ssb.h +@@ -26,9 +26,9 @@ struct ssb_sprom_core_pwr_info { + + struct ssb_sprom { + u8 revision; +- u8 il0mac[6]; /* MAC address for 802.11b/g */ +- u8 et0mac[6]; /* MAC address for Ethernet */ +- u8 et1mac[6]; /* MAC address for 802.11a */ ++ u8 il0mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11b/g */ ++ u8 et0mac[6] __aligned(sizeof(u16)); /* MAC address for Ethernet */ ++ u8 et1mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11a */ + u8 et0phyaddr; /* MII address for enet0 */ + u8 et1phyaddr; /* MII address for enet1 */ + u8 et0mdcport; /* MDIO for enet0 */ +@@ -340,13 +340,61 @@ enum ssb_bustype { + #define SSB_BOARDVENDOR_DELL 0x1028 /* Dell */ + #define SSB_BOARDVENDOR_HP 0x0E11 /* HP */ + /* board_type */ ++#define SSB_BOARD_BCM94301CB 0x0406 ++#define SSB_BOARD_BCM94301MP 0x0407 ++#define SSB_BOARD_BU4309 0x040A ++#define SSB_BOARD_BCM94309CB 0x040B ++#define SSB_BOARD_BCM4309MP 0x040C ++#define SSB_BOARD_BU4306 0x0416 + #define SSB_BOARD_BCM94306MP 0x0418 + #define SSB_BOARD_BCM4309G 0x0421 + #define SSB_BOARD_BCM4306CB 0x0417 +-#define SSB_BOARD_BCM4309MP 0x040C ++#define SSB_BOARD_BCM94306PC 0x0425 /* pcmcia 3.3v 4306 card */ ++#define SSB_BOARD_BCM94306CBSG 0x042B /* with SiGe PA */ ++#define SSB_BOARD_PCSG94306 0x042D /* with SiGe PA */ ++#define SSB_BOARD_BU4704SD 0x042E /* with sdram */ ++#define SSB_BOARD_BCM94704AGR 0x042F /* dual 11a/11g Router */ ++#define SSB_BOARD_BCM94308MP 0x0430 /* 11a-only minipci */ ++#define SSB_BOARD_BU4318 0x0447 ++#define SSB_BOARD_CB4318 0x0448 ++#define SSB_BOARD_MPG4318 0x0449 + #define SSB_BOARD_MP4318 0x044A +-#define SSB_BOARD_BU4306 0x0416 +-#define SSB_BOARD_BU4309 0x040A ++#define SSB_BOARD_SD4318 0x044B ++#define SSB_BOARD_BCM94306P 0x044C /* with SiGe */ ++#define SSB_BOARD_BCM94303MP 0x044E ++#define SSB_BOARD_BCM94306MPM 0x0450 ++#define SSB_BOARD_BCM94306MPL 0x0453 ++#define SSB_BOARD_PC4303 0x0454 /* pcmcia */ ++#define SSB_BOARD_BCM94306MPLNA 0x0457 ++#define SSB_BOARD_BCM94306MPH 0x045B ++#define SSB_BOARD_BCM94306PCIV 0x045C ++#define SSB_BOARD_BCM94318MPGH 0x0463 ++#define SSB_BOARD_BU4311 0x0464 ++#define SSB_BOARD_BCM94311MC 0x0465 ++#define SSB_BOARD_BCM94311MCAG 0x0466 ++/* 4321 boards */ ++#define SSB_BOARD_BU4321 0x046B ++#define SSB_BOARD_BU4321E 0x047C ++#define SSB_BOARD_MP4321 0x046C ++#define SSB_BOARD_CB2_4321 0x046D ++#define SSB_BOARD_CB2_4321_AG 0x0066 ++#define SSB_BOARD_MC4321 0x046E ++/* 4325 boards */ ++#define SSB_BOARD_BCM94325DEVBU 0x0490 ++#define SSB_BOARD_BCM94325BGABU 0x0491 ++#define SSB_BOARD_BCM94325SDGWB 0x0492 ++#define SSB_BOARD_BCM94325SDGMDL 0x04AA ++#define SSB_BOARD_BCM94325SDGMDL2 0x04C6 ++#define SSB_BOARD_BCM94325SDGMDL3 0x04C9 ++#define SSB_BOARD_BCM94325SDABGWBA 0x04E1 ++/* 4322 boards */ ++#define SSB_BOARD_BCM94322MC 0x04A4 ++#define SSB_BOARD_BCM94322USB 0x04A8 /* dualband */ ++#define SSB_BOARD_BCM94322HM 0x04B0 ++#define SSB_BOARD_BCM94322USB2D 0x04Bf /* single band discrete front end */ ++/* 4312 boards */ ++#define SSB_BOARD_BU4312 0x048A ++#define SSB_BOARD_BCM4312MCGSG 0x04B5 + /* chip_package */ + #define SSB_CHIPPACK_BCM4712S 1 /* Small 200pin 4712 */ + #define SSB_CHIPPACK_BCM4712M 2 /* Medium 225pin 4712 */ +--- a/include/linux/ssb/ssb_driver_gige.h ++++ b/include/linux/ssb/ssb_driver_gige.h +@@ -97,21 +97,16 @@ static inline bool ssb_gige_must_flush_p + return 0; + } + +-#ifdef CONFIG_BCM47XX +-#include <asm/mach-bcm47xx/nvram.h> + /* Get the device MAC address */ +-static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr) +-{ +- char buf[20]; +- if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0) +- return; +- nvram_parse_macaddr(buf, macaddr); +-} +-#else +-static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr) ++static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr) + { ++ struct ssb_gige *dev = pdev_to_ssb_gige(pdev); ++ if (!dev) ++ return -ENODEV; ++ ++ memcpy(macaddr, dev->dev->bus->sprom.et0mac, 6); ++ return 0; + } +-#endif + + extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev, + struct pci_dev *pdev); +@@ -175,6 +170,10 @@ static inline bool ssb_gige_must_flush_p + { + return 0; + } ++static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr) ++{ ++ return -ENODEV; ++} + + #endif /* CONFIG_SSB_DRIVER_GIGE */ + #endif /* LINUX_SSB_DRIVER_GIGE_H_ */ +--- a/include/linux/ssb/ssb_driver_mips.h ++++ b/include/linux/ssb/ssb_driver_mips.h +@@ -45,6 +45,11 @@ void ssb_mipscore_init(struct ssb_mipsco + { + } + ++static inline unsigned int ssb_mips_irq(struct ssb_device *dev) ++{ ++ return 0; ++} ++ + #endif /* CONFIG_SSB_DRIVER_MIPS */ + + #endif /* LINUX_SSB_MIPSCORE_H_ */ +--- a/include/linux/ssb/ssb_regs.h ++++ b/include/linux/ssb/ssb_regs.h +@@ -289,11 +289,11 @@ + #define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5 + #define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */ + #define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */ +-#define SSB_SPROM4_ANTAVAIL 0x005D /* Antenna available bitfields */ +-#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */ +-#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0 +-#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */ +-#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8 ++#define SSB_SPROM4_ANTAVAIL 0x005C /* Antenna available bitfields */ ++#define SSB_SPROM4_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */ ++#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 0 ++#define SSB_SPROM4_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ ++#define SSB_SPROM4_ANTAVAIL_A_SHIFT 8 + #define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */ + #define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */ + #define SSB_SPROM4_AGAIN0_SHIFT 0 |