diff options
Diffstat (limited to 'target/linux/generic/patches-3.6')
| -rw-r--r-- | target/linux/generic/patches-3.6/020-ssb_update.patch | 82 | ||||
| -rw-r--r-- | target/linux/generic/patches-3.6/025-bcma_backport.patch | 1035 |
2 files changed, 1117 insertions, 0 deletions
diff --git a/target/linux/generic/patches-3.6/020-ssb_update.patch b/target/linux/generic/patches-3.6/020-ssb_update.patch new file mode 100644 index 000000000..e61be82fe --- /dev/null +++ b/target/linux/generic/patches-3.6/020-ssb_update.patch @@ -0,0 +1,82 @@ +--- a/drivers/ssb/driver_mipscore.c ++++ b/drivers/ssb/driver_mipscore.c +@@ -190,16 +190,32 @@ static void ssb_mips_flash_detect(struct + { + struct ssb_bus *bus = mcore->dev->bus; + +- mcore->flash_buswidth = 2; +- if (bus->chipco.dev) { +- mcore->flash_window = 0x1c000000; +- mcore->flash_window_size = 0x02000000; ++ /* When there is no chipcommon on the bus there is 4MB flash */ ++ if (!bus->chipco.dev) { ++ mcore->pflash.present = true; ++ mcore->pflash.buswidth = 2; ++ mcore->pflash.window = SSB_FLASH1; ++ mcore->pflash.window_size = SSB_FLASH1_SZ; ++ return; ++ } ++ ++ /* There is ChipCommon, so use it to read info about flash */ ++ switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) { ++ case SSB_CHIPCO_FLASHT_STSER: ++ case SSB_CHIPCO_FLASHT_ATSER: ++ pr_err("Serial flash not supported\n"); ++ break; ++ case SSB_CHIPCO_FLASHT_PARA: ++ pr_debug("Found parallel flash\n"); ++ mcore->pflash.present = true; ++ mcore->pflash.window = SSB_FLASH2; ++ mcore->pflash.window_size = SSB_FLASH2_SZ; + if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG) + & SSB_CHIPCO_CFG_DS16) == 0) +- mcore->flash_buswidth = 1; +- } else { +- mcore->flash_window = 0x1fc00000; +- mcore->flash_window_size = 0x00400000; ++ mcore->pflash.buswidth = 1; ++ else ++ mcore->pflash.buswidth = 2; ++ break; + } + } + +--- a/include/linux/ssb/ssb_driver_chipcommon.h ++++ b/include/linux/ssb/ssb_driver_chipcommon.h +@@ -504,7 +504,9 @@ + #define SSB_CHIPCO_FLASHCTL_ST_SE 0x02D8 /* Sector Erase */ + #define SSB_CHIPCO_FLASHCTL_ST_BE 0x00C7 /* Bulk Erase */ + #define SSB_CHIPCO_FLASHCTL_ST_DP 0x00B9 /* Deep Power-down */ +-#define SSB_CHIPCO_FLASHCTL_ST_RSIG 0x03AB /* Read Electronic Signature */ ++#define SSB_CHIPCO_FLASHCTL_ST_RES 0x03AB /* Read Electronic Signature */ ++#define SSB_CHIPCO_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */ ++#define SSB_CHIPCO_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */ + + /* Status register bits for ST flashes */ + #define SSB_CHIPCO_FLASHSTA_ST_WIP 0x01 /* Write In Progress */ +--- a/include/linux/ssb/ssb_driver_mips.h ++++ b/include/linux/ssb/ssb_driver_mips.h +@@ -13,6 +13,12 @@ struct ssb_serial_port { + unsigned int reg_shift; + }; + ++struct ssb_pflash { ++ bool present; ++ u8 buswidth; ++ u32 window; ++ u32 window_size; ++}; + + struct ssb_mipscore { + struct ssb_device *dev; +@@ -20,9 +26,7 @@ struct ssb_mipscore { + int nr_serial_ports; + struct ssb_serial_port serial_ports[4]; + +- u8 flash_buswidth; +- u32 flash_window; +- u32 flash_window_size; ++ struct ssb_pflash pflash; + }; + + extern void ssb_mipscore_init(struct ssb_mipscore *mcore); diff --git a/target/linux/generic/patches-3.6/025-bcma_backport.patch b/target/linux/generic/patches-3.6/025-bcma_backport.patch new file mode 100644 index 000000000..d791f16a0 --- /dev/null +++ b/target/linux/generic/patches-3.6/025-bcma_backport.patch @@ -0,0 +1,1035 @@ +--- a/drivers/bcma/Kconfig ++++ b/drivers/bcma/Kconfig +@@ -48,12 +48,12 @@ config BCMA_DRIVER_MIPS + + config BCMA_SFLASH + bool +- depends on BCMA_DRIVER_MIPS && BROKEN ++ depends on BCMA_DRIVER_MIPS + default y + + config BCMA_NFLASH + bool +- depends on BCMA_DRIVER_MIPS && BROKEN ++ depends on BCMA_DRIVER_MIPS + default y + + config BCMA_DRIVER_GMAC_CMN +--- a/drivers/bcma/bcma_private.h ++++ b/drivers/bcma/bcma_private.h +@@ -54,6 +54,7 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr + #ifdef CONFIG_BCMA_SFLASH + /* driver_chipcommon_sflash.c */ + int bcma_sflash_init(struct bcma_drv_cc *cc); ++extern struct platform_device bcma_sflash_dev; + #else + static inline int bcma_sflash_init(struct bcma_drv_cc *cc) + { +@@ -65,6 +66,7 @@ static inline int bcma_sflash_init(struc + #ifdef CONFIG_BCMA_NFLASH + /* driver_chipcommon_nflash.c */ + int bcma_nflash_init(struct bcma_drv_cc *cc); ++extern struct platform_device bcma_nflash_dev; + #else + static inline int bcma_nflash_init(struct bcma_drv_cc *cc) + { +--- a/drivers/bcma/core.c ++++ b/drivers/bcma/core.c +@@ -65,7 +65,7 @@ void bcma_core_set_clockmode(struct bcma + switch (clkmode) { + case BCMA_CLKMODE_FAST: + bcma_set32(core, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT); +- udelay(64); ++ usleep_range(64, 300); + for (i = 0; i < 1500; i++) { + if (bcma_read32(core, BCMA_CLKCTLST) & + BCMA_CLKCTLST_HAVEHT) { +--- a/drivers/bcma/driver_chipcommon.c ++++ b/drivers/bcma/driver_chipcommon.c +@@ -22,12 +22,9 @@ static inline u32 bcma_cc_write32_masked + return value; + } + +-void bcma_core_chipcommon_init(struct bcma_drv_cc *cc) ++void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc) + { +- u32 leddc_on = 10; +- u32 leddc_off = 90; +- +- if (cc->setup_done) ++ if (cc->early_setup_done) + return; + + if (cc->core->id.rev >= 11) +@@ -36,6 +33,22 @@ void bcma_core_chipcommon_init(struct bc + if (cc->core->id.rev >= 35) + cc->capabilities_ext = bcma_cc_read32(cc, BCMA_CC_CAP_EXT); + ++ if (cc->capabilities & BCMA_CC_CAP_PMU) ++ bcma_pmu_early_init(cc); ++ ++ cc->early_setup_done = true; ++} ++ ++void bcma_core_chipcommon_init(struct bcma_drv_cc *cc) ++{ ++ u32 leddc_on = 10; ++ u32 leddc_off = 90; ++ ++ if (cc->setup_done) ++ return; ++ ++ bcma_core_chipcommon_early_init(cc); ++ + if (cc->core->id.rev >= 20) { + bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0); + bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0); +--- a/drivers/bcma/driver_chipcommon_nflash.c ++++ b/drivers/bcma/driver_chipcommon_nflash.c +@@ -5,15 +5,40 @@ + * Licensed under the GNU/GPL. See COPYING for details. + */ + ++#include <linux/platform_device.h> + #include <linux/bcma/bcma.h> +-#include <linux/bcma/bcma_driver_chipcommon.h> +-#include <linux/delay.h> + + #include "bcma_private.h" + ++struct platform_device bcma_nflash_dev = { ++ .name = "bcma_nflash", ++ .num_resources = 0, ++}; ++ + /* Initialize NAND flash access */ + int bcma_nflash_init(struct bcma_drv_cc *cc) + { +- bcma_err(cc->core->bus, "NAND flash support is broken\n"); ++ struct bcma_bus *bus = cc->core->bus; ++ ++ if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4706 && ++ cc->core->id.rev != 0x38) { ++ bcma_err(bus, "NAND flash on unsupported board!\n"); ++ return -ENOTSUPP; ++ } ++ ++ if (!(cc->capabilities & BCMA_CC_CAP_NFLASH)) { ++ bcma_err(bus, "NAND flash not present according to ChipCommon\n"); ++ return -ENODEV; ++ } ++ ++ cc->nflash.present = true; ++ if (cc->core->id.rev == 38 && ++ (cc->status & BCMA_CC_CHIPST_5357_NAND_BOOT)) ++ cc->nflash.boot = true; ++ ++ /* Prepare platform device, but don't register it yet. It's too early, ++ * malloc (required by device_private_init) is not available yet. */ ++ bcma_nflash_dev.dev.platform_data = &cc->nflash; ++ + return 0; + } +--- a/drivers/bcma/driver_chipcommon_pmu.c ++++ b/drivers/bcma/driver_chipcommon_pmu.c +@@ -76,7 +76,10 @@ static void bcma_pmu_resources_init(stru + if (max_msk) + bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk); + +- /* Add some delay; allow resources to come up and settle. */ ++ /* ++ * Add some delay; allow resources to come up and settle. ++ * Delay is required for SoC (early init). ++ */ + mdelay(2); + } + +@@ -101,7 +104,7 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct + bcma_cc_write32(cc, BCMA_CC_CHIPCTL, val); + } + +-void bcma_pmu_workarounds(struct bcma_drv_cc *cc) ++static void bcma_pmu_workarounds(struct bcma_drv_cc *cc) + { + struct bcma_bus *bus = cc->core->bus; + +@@ -141,7 +144,7 @@ void bcma_pmu_workarounds(struct bcma_dr + } + } + +-void bcma_pmu_init(struct bcma_drv_cc *cc) ++void bcma_pmu_early_init(struct bcma_drv_cc *cc) + { + u32 pmucap; + +@@ -150,7 +153,10 @@ void bcma_pmu_init(struct bcma_drv_cc *c + + bcma_debug(cc->core->bus, "Found rev %u PMU (capabilities 0x%08X)\n", + cc->pmu.rev, pmucap); ++} + ++void bcma_pmu_init(struct bcma_drv_cc *cc) ++{ + if (cc->pmu.rev == 1) + bcma_cc_mask32(cc, BCMA_CC_PMU_CTL, + ~BCMA_CC_PMU_CTL_NOILPONW); +@@ -257,7 +263,7 @@ static u32 bcma_pmu_clock_bcm4706(struct + } + + /* query bus clock frequency for PMU-enabled chipcommon */ +-u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc) ++static u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc) + { + struct bcma_bus *bus = cc->core->bus; + +--- a/drivers/bcma/driver_chipcommon_sflash.c ++++ b/drivers/bcma/driver_chipcommon_sflash.c +@@ -5,15 +5,161 @@ + * Licensed under the GNU/GPL. See COPYING for details. + */ + ++#include <linux/platform_device.h> + #include <linux/bcma/bcma.h> +-#include <linux/bcma/bcma_driver_chipcommon.h> +-#include <linux/delay.h> + + #include "bcma_private.h" + ++static struct resource bcma_sflash_resource = { ++ .name = "bcma_sflash", ++ .start = BCMA_SOC_FLASH2, ++ .end = 0, ++ .flags = IORESOURCE_MEM | IORESOURCE_READONLY, ++}; ++ ++struct platform_device bcma_sflash_dev = { ++ .name = "bcma_sflash", ++ .resource = &bcma_sflash_resource, ++ .num_resources = 1, ++}; ++ ++struct bcma_sflash_tbl_e { ++ char *name; ++ u32 id; ++ u32 blocksize; ++ u16 numblocks; ++}; ++ ++static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = { ++ { "M25P20", 0x11, 0x10000, 4, }, ++ { "M25P40", 0x12, 0x10000, 8, }, ++ ++ { "M25P16", 0x14, 0x10000, 32, }, ++ { "M25P32", 0x14, 0x10000, 64, }, ++ { "M25P64", 0x16, 0x10000, 128, }, ++ { "M25FL128", 0x17, 0x10000, 256, }, ++ { 0 }, ++}; ++ ++static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = { ++ { "SST25WF512", 1, 0x1000, 16, }, ++ { "SST25VF512", 0x48, 0x1000, 16, }, ++ { "SST25WF010", 2, 0x1000, 32, }, ++ { "SST25VF010", 0x49, 0x1000, 32, }, ++ { "SST25WF020", 3, 0x1000, 64, }, ++ { "SST25VF020", 0x43, 0x1000, 64, }, ++ { "SST25WF040", 4, 0x1000, 128, }, ++ { "SST25VF040", 0x44, 0x1000, 128, }, ++ { "SST25VF040B", 0x8d, 0x1000, 128, }, ++ { "SST25WF080", 5, 0x1000, 256, }, ++ { "SST25VF080B", 0x8e, 0x1000, 256, }, ++ { "SST25VF016", 0x41, 0x1000, 512, }, ++ { "SST25VF032", 0x4a, 0x1000, 1024, }, ++ { "SST25VF064", 0x4b, 0x1000, 2048, }, ++ { 0 }, ++}; ++ ++static struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = { ++ { "AT45DB011", 0xc, 256, 512, }, ++ { "AT45DB021", 0x14, 256, 1024, }, ++ { "AT45DB041", 0x1c, 256, 2048, }, ++ { "AT45DB081", 0x24, 256, 4096, }, ++ { "AT45DB161", 0x2c, 512, 4096, }, ++ { "AT45DB321", 0x34, 512, 8192, }, ++ { "AT45DB642", 0x3c, 1024, 8192, }, ++ { 0 }, ++}; ++ ++static void bcma_sflash_cmd(struct bcma_drv_cc *cc, u32 opcode) ++{ ++ int i; ++ bcma_cc_write32(cc, BCMA_CC_FLASHCTL, ++ BCMA_CC_FLASHCTL_START | opcode); ++ for (i = 0; i < 1000; i++) { ++ if (!(bcma_cc_read32(cc, BCMA_CC_FLASHCTL) & ++ BCMA_CC_FLASHCTL_BUSY)) ++ return; ++ cpu_relax(); ++ } ++ bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n"); ++} ++ + /* Initialize serial flash access */ + int bcma_sflash_init(struct bcma_drv_cc *cc) + { +- bcma_err(cc->core->bus, "Serial flash support is broken\n"); ++ struct bcma_bus *bus = cc->core->bus; ++ struct bcma_sflash *sflash = &cc->sflash; ++ struct bcma_sflash_tbl_e *e; ++ u32 id, id2; ++ ++ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) { ++ case BCMA_CC_FLASHT_STSER: ++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_DP); ++ ++ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 0); ++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES); ++ id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA); ++ ++ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 1); ++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES); ++ id2 = bcma_cc_read32(cc, BCMA_CC_FLASHDATA); ++ ++ switch (id) { ++ case 0xbf: ++ for (e = bcma_sflash_sst_tbl; e->name; e++) { ++ if (e->id == id2) ++ break; ++ } ++ break; ++ case 0x13: ++ return -ENOTSUPP; ++ default: ++ for (e = bcma_sflash_st_tbl; e->name; e++) { ++ if (e->id == id) ++ break; ++ } ++ break; ++ } ++ if (!e->name) { ++ bcma_err(bus, "Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n", id, id2); ++ return -ENOTSUPP; ++ } ++ ++ break; ++ case BCMA_CC_FLASHT_ATSER: ++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_STATUS); ++ id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA) & 0x3c; ++ ++ for (e = bcma_sflash_at_tbl; e->name; e++) { ++ if (e->id == id) ++ break; ++ } ++ if (!e->name) { ++ bcma_err(bus, "Unsupported Atmel serial flash (id: 0x%X)\n", id); ++ return -ENOTSUPP; ++ } ++ ++ break; ++ default: ++ bcma_err(bus, "Unsupported flash type\n"); ++ return -ENOTSUPP; ++ } ++ ++ sflash->window = BCMA_SOC_FLASH2; ++ sflash->blocksize = e->blocksize; ++ sflash->numblocks = e->numblocks; ++ sflash->size = sflash->blocksize * sflash->numblocks; ++ sflash->present = true; ++ ++ bcma_info(bus, "Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n", ++ e->name, sflash->size / 1024, sflash->blocksize, ++ sflash->numblocks); ++ ++ /* Prepare platform device, but don't register it yet. It's too early, ++ * malloc (required by device_private_init) is not available yet. */ ++ bcma_sflash_dev.resource[0].end = bcma_sflash_dev.resource[0].start + ++ sflash->size; ++ bcma_sflash_dev.dev.platform_data = sflash; ++ + return 0; + } +--- a/drivers/bcma/driver_mips.c ++++ b/drivers/bcma/driver_mips.c +@@ -181,47 +181,66 @@ EXPORT_SYMBOL(bcma_cpu_clock); + static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore) + { + struct bcma_bus *bus = mcore->core->bus; ++ struct bcma_drv_cc *cc = &bus->drv_cc; + +- switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) { ++ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) { + case BCMA_CC_FLASHT_STSER: + case BCMA_CC_FLASHT_ATSER: + bcma_debug(bus, "Found serial flash\n"); +- bcma_sflash_init(&bus->drv_cc); ++ bcma_sflash_init(cc); + break; + case BCMA_CC_FLASHT_PARA: + bcma_debug(bus, "Found parallel flash\n"); +- bus->drv_cc.pflash.window = 0x1c000000; +- bus->drv_cc.pflash.window_size = 0x02000000; ++ cc->pflash.present = true; ++ cc->pflash.window = BCMA_SOC_FLASH2; ++ cc->pflash.window_size = BCMA_SOC_FLASH2_SZ; + +- if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) & ++ if ((bcma_read32(cc->core, BCMA_CC_FLASH_CFG) & + BCMA_CC_FLASH_CFG_DS) == 0) +- bus->drv_cc.pflash.buswidth = 1; ++ cc->pflash.buswidth = 1; + else +- bus->drv_cc.pflash.buswidth = 2; ++ cc->pflash.buswidth = 2; + break; + default: + bcma_err(bus, "Flash type not supported\n"); + } + +- if (bus->drv_cc.core->id.rev == 38 || ++ if (cc->core->id.rev == 38 || + bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) { +- if (bus->drv_cc.capabilities & BCMA_CC_CAP_NFLASH) { ++ if (cc->capabilities & BCMA_CC_CAP_NFLASH) { + bcma_debug(bus, "Found NAND flash\n"); +- bcma_nflash_init(&bus->drv_cc); ++ bcma_nflash_init(cc); + } + } + } + ++void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus = mcore->core->bus; ++ ++ if (mcore->early_setup_done) ++ return; ++ ++ bcma_chipco_serial_init(&bus->drv_cc); ++ bcma_core_mips_flash_detect(mcore); ++ ++ mcore->early_setup_done = true; ++} ++ + void bcma_core_mips_init(struct bcma_drv_mips *mcore) + { + struct bcma_bus *bus; + struct bcma_device *core; + bus = mcore->core->bus; + ++ if (mcore->setup_done) ++ return; ++ + bcma_info(bus, "Initializing MIPS core...\n"); + +- if (!mcore->setup_done) +- mcore->assigned_irqs = 1; ++ bcma_core_mips_early_init(mcore); ++ ++ mcore->assigned_irqs = 1; + + /* Assign IRQs to all cores on the bus */ + list_for_each_entry(core, &bus->cores, list) { +@@ -256,10 +275,5 @@ void bcma_core_mips_init(struct bcma_drv + bcma_info(bus, "IRQ reconfiguration done\n"); + bcma_core_mips_dump_irq(bus); + +- if (mcore->setup_done) +- return; +- +- bcma_chipco_serial_init(&bus->drv_cc); +- bcma_core_mips_flash_detect(mcore); + mcore->setup_done = true; + } +--- a/drivers/bcma/driver_pci.c ++++ b/drivers/bcma/driver_pci.c +@@ -51,7 +51,7 @@ static void bcma_pcie_mdio_set_phy(struc + v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); + if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) + break; +- msleep(1); ++ usleep_range(1000, 2000); + } + } + +@@ -92,7 +92,7 @@ static u16 bcma_pcie_mdio_read(struct bc + ret = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_DATA); + break; + } +- msleep(1); ++ usleep_range(1000, 2000); + } + pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); + return ret; +@@ -132,7 +132,7 @@ static void bcma_pcie_mdio_write(struct + v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); + if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) + break; +- msleep(1); ++ usleep_range(1000, 2000); + } + pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); + } +--- a/drivers/bcma/driver_pci_host.c ++++ b/drivers/bcma/driver_pci_host.c +@@ -35,11 +35,6 @@ bool __devinit bcma_core_pci_is_in_hostm + chipid_top != 0x5300) + return false; + +- if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) { +- bcma_info(bus, "This PCI core is disabled and not working\n"); +- return false; +- } +- + bcma_core_enable(pc->core, 0); + + return !mips_busprobe32(tmp, pc->core->io_addr); +@@ -396,6 +391,11 @@ void __devinit bcma_core_pci_hostmode_in + + bcma_info(bus, "PCIEcore in host mode found\n"); + ++ if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) { ++ bcma_info(bus, "This PCIE core is disabled and not working\n"); ++ return; ++ } ++ + pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL); + if (!pc_host) { + bcma_err(bus, "can not allocate memory"); +@@ -425,9 +425,9 @@ void __devinit bcma_core_pci_hostmode_in + pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED; + + /* Reset RC */ +- udelay(3000); ++ usleep_range(3000, 5000); + pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE); +- udelay(1000); ++ usleep_range(1000, 2000); + pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST | + BCMA_CORE_PCI_CTL_RST_OE); + +@@ -452,6 +452,8 @@ void __devinit bcma_core_pci_hostmode_in + pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; + pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + + BCMA_SOC_PCI_MEM_SZ - 1; ++ pc_host->io_resource.start = 0x100; ++ pc_host->io_resource.end = 0x47F; + pci_membase_1G = BCMA_SOC_PCIE_DMA_H32; + pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, + tmp | BCMA_SOC_PCI_MEM); +@@ -459,6 +461,8 @@ void __devinit bcma_core_pci_hostmode_in + pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM; + pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM + + BCMA_SOC_PCI_MEM_SZ - 1; ++ pc_host->io_resource.start = 0x480; ++ pc_host->io_resource.end = 0x7FF; + pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32; + pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG; + pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, +@@ -481,7 +485,7 @@ void __devinit bcma_core_pci_hostmode_in + * before issuing configuration requests to PCI Express + * devices. + */ +- udelay(100000); ++ msleep(100); + + bcma_core_pci_enable_crs(pc); + +@@ -501,7 +505,7 @@ void __devinit bcma_core_pci_hostmode_in + set_io_port_base(pc_host->pci_controller.io_map_base); + /* Give some time to the PCI controller to configure itself with the new + * values. Not waiting at this point causes crashes of the machine. */ +- mdelay(10); ++ usleep_range(10000, 15000); + register_pci_controller(&pc_host->pci_controller); + return; + } +--- a/drivers/bcma/host_pci.c ++++ b/drivers/bcma/host_pci.c +@@ -77,8 +77,8 @@ static void bcma_host_pci_write32(struct + } + + #ifdef CONFIG_BCMA_BLOCKIO +-void bcma_host_pci_block_read(struct bcma_device *core, void *buffer, +- size_t count, u16 offset, u8 reg_width) ++static void bcma_host_pci_block_read(struct bcma_device *core, void *buffer, ++ size_t count, u16 offset, u8 reg_width) + { + void __iomem *addr = core->bus->mmio + offset; + if (core->bus->mapped_core != core) +@@ -100,8 +100,9 @@ void bcma_host_pci_block_read(struct bcm + } + } + +-void bcma_host_pci_block_write(struct bcma_device *core, const void *buffer, +- size_t count, u16 offset, u8 reg_width) ++static void bcma_host_pci_block_write(struct bcma_device *core, ++ const void *buffer, size_t count, ++ u16 offset, u8 reg_width) + { + void __iomem *addr = core->bus->mmio + offset; + if (core->bus->mapped_core != core) +@@ -139,7 +140,7 @@ static void bcma_host_pci_awrite32(struc + iowrite32(value, core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset); + } + +-const struct bcma_host_ops bcma_host_pci_ops = { ++static const struct bcma_host_ops bcma_host_pci_ops = { + .read8 = bcma_host_pci_read8, + .read16 = bcma_host_pci_read16, + .read32 = bcma_host_pci_read32, +@@ -272,6 +273,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_ + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) }, ++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) }, + { 0, }, +--- a/drivers/bcma/host_soc.c ++++ b/drivers/bcma/host_soc.c +@@ -143,7 +143,7 @@ static void bcma_host_soc_awrite32(struc + writel(value, core->io_wrap + offset); + } + +-const struct bcma_host_ops bcma_host_soc_ops = { ++static const struct bcma_host_ops bcma_host_soc_ops = { + .read8 = bcma_host_soc_read8, + .read16 = bcma_host_soc_read16, + .read32 = bcma_host_soc_read32, +--- a/drivers/bcma/main.c ++++ b/drivers/bcma/main.c +@@ -7,6 +7,7 @@ + + #include "bcma_private.h" + #include <linux/module.h> ++#include <linux/platform_device.h> + #include <linux/bcma/bcma.h> + #include <linux/slab.h> + +@@ -80,6 +81,18 @@ struct bcma_device *bcma_find_core(struc + } + EXPORT_SYMBOL_GPL(bcma_find_core); + ++static struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid, ++ u8 unit) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry(core, &bus->cores, list) { ++ if (core->id.id == coreid && core->core_unit == unit) ++ return core; ++ } ++ return NULL; ++} ++ + static void bcma_release_core_dev(struct device *dev) + { + struct bcma_device *core = container_of(dev, struct bcma_device, dev); +@@ -136,14 +149,31 @@ static int bcma_register_cores(struct bc + dev_id++; + } + ++#ifdef CONFIG_BCMA_SFLASH ++ if (bus->drv_cc.sflash.present) { ++ err = platform_device_register(&bcma_sflash_dev); ++ if (err) ++ bcma_err(bus, "Error registering serial flash\n"); ++ } ++#endif ++ ++#ifdef CONFIG_BCMA_NFLASH ++ if (bus->drv_cc.nflash.present) { ++ err = platform_device_register(&bcma_nflash_dev); ++ if (err) ++ bcma_err(bus, "Error registering NAND flash\n"); ++ } ++#endif ++ + return 0; + } + + static void bcma_unregister_cores(struct bcma_bus *bus) + { +- struct bcma_device *core; ++ struct bcma_device *core, *tmp; + +- list_for_each_entry(core, &bus->cores, list) { ++ list_for_each_entry_safe(core, tmp, &bus->cores, list) { ++ list_del(&core->list); + if (core->dev_registered) + device_unregister(&core->dev); + } +@@ -165,6 +195,20 @@ int __devinit bcma_bus_register(struct b + return -1; + } + ++ /* Early init CC core */ ++ core = bcma_find_core(bus, bcma_cc_core_id(bus)); ++ if (core) { ++ bus->drv_cc.core = core; ++ bcma_core_chipcommon_early_init(&bus->drv_cc); ++ } ++ ++ /* Try to get SPROM */ ++ err = bcma_sprom_get(bus); ++ if (err == -ENOENT) { ++ bcma_err(bus, "No SPROM available\n"); ++ } else if (err) ++ bcma_err(bus, "Failed to get SPROM: %d\n", err); ++ + /* Init CC core */ + core = bcma_find_core(bus, bcma_cc_core_id(bus)); + if (core) { +@@ -180,10 +224,17 @@ int __devinit bcma_bus_register(struct b + } + + /* Init PCIE core */ +- core = bcma_find_core(bus, BCMA_CORE_PCIE); ++ core = bcma_find_core_unit(bus, BCMA_CORE_PCIE, 0); + if (core) { +- bus->drv_pci.core = core; +- bcma_core_pci_init(&bus->drv_pci); ++ bus->drv_pci[0].core = core; ++ bcma_core_pci_init(&bus->drv_pci[0]); ++ } ++ ++ /* Init PCIE core */ ++ core = bcma_find_core_unit(bus, BCMA_CORE_PCIE, 1); ++ if (core) { ++ bus->drv_pci[1].core = core; ++ bcma_core_pci_init(&bus->drv_pci[1]); + } + + /* Init GBIT MAC COMMON core */ +@@ -193,13 +244,6 @@ int __devinit bcma_bus_register(struct b + bcma_core_gmac_cmn_init(&bus->drv_gmac_cmn); + } + +- /* Try to get SPROM */ +- err = bcma_sprom_get(bus); +- if (err == -ENOENT) { +- bcma_err(bus, "No SPROM available\n"); +- } else if (err) +- bcma_err(bus, "Failed to get SPROM: %d\n", err); +- + /* Register found cores */ + bcma_register_cores(bus); + +@@ -210,7 +254,17 @@ int __devinit bcma_bus_register(struct b + + void bcma_bus_unregister(struct bcma_bus *bus) + { ++ struct bcma_device *cores[3]; ++ ++ cores[0] = bcma_find_core(bus, BCMA_CORE_MIPS_74K); ++ cores[1] = bcma_find_core(bus, BCMA_CORE_PCIE); ++ cores[2] = bcma_find_core(bus, BCMA_CORE_4706_MAC_GBIT_COMMON); ++ + bcma_unregister_cores(bus); ++ ++ kfree(cores[2]); ++ kfree(cores[1]); ++ kfree(cores[0]); + } + + int __init bcma_bus_early_register(struct bcma_bus *bus, +@@ -247,18 +301,18 @@ int __init bcma_bus_early_register(struc + return -1; + } + +- /* Init CC core */ ++ /* Early init CC core */ + core = bcma_find_core(bus, bcma_cc_core_id(bus)); + if (core) { + bus->drv_cc.core = core; +- bcma_core_chipcommon_init(&bus->drv_cc); ++ bcma_core_chipcommon_early_init(&bus->drv_cc); + } + +- /* Init MIPS core */ ++ /* Early init MIPS core */ + core = bcma_find_core(bus, BCMA_CORE_MIPS_74K); + if (core) { + bus->drv_mips.core = core; +- bcma_core_mips_init(&bus->drv_mips); ++ bcma_core_mips_early_init(&bus->drv_mips); + } + + bcma_info(bus, "Early bus registered\n"); +--- a/drivers/bcma/sprom.c ++++ b/drivers/bcma/sprom.c +@@ -507,7 +507,9 @@ static bool bcma_sprom_onchip_available( + /* for these chips OTP is always available */ + present = true; + break; ++ case BCMA_CHIP_ID_BCM43227: + case BCMA_CHIP_ID_BCM43228: ++ case BCMA_CHIP_ID_BCM43428: + present = chip_status & BCMA_CC_CHIPST_43228_OTP_PRESENT; + break; + default: +@@ -593,8 +595,11 @@ int bcma_sprom_get(struct bcma_bus *bus) + bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true); + + err = bcma_sprom_valid(sprom); +- if (err) ++ if (err) { ++ bcma_warn(bus, "invalid sprom read from the PCIe card, try to use fallback sprom\n"); ++ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom); + goto out; ++ } + + bcma_sprom_extract_r8(bus, sprom); + +--- a/include/linux/bcma/bcma.h ++++ b/include/linux/bcma/bcma.h +@@ -10,7 +10,7 @@ + #include <linux/bcma/bcma_driver_gmac_cmn.h> + #include <linux/ssb/ssb.h> /* SPROM sharing */ + +-#include "bcma_regs.h" ++#include <linux/bcma/bcma_regs.h> + + struct bcma_device; + struct bcma_bus; +@@ -251,7 +251,7 @@ struct bcma_bus { + u8 num; + + struct bcma_drv_cc drv_cc; +- struct bcma_drv_pci drv_pci; ++ struct bcma_drv_pci drv_pci[2]; + struct bcma_drv_mips drv_mips; + struct bcma_drv_gmac_cmn drv_gmac_cmn; + +--- a/include/linux/bcma/bcma_driver_chipcommon.h ++++ b/include/linux/bcma/bcma_driver_chipcommon.h +@@ -100,6 +100,7 @@ + #define BCMA_CC_CHIPST_4706_SFLASH_TYPE BIT(2) /* 0: 8b-p/ST-s flash, 1: 16b-p/Atmal-s flash */ + #define BCMA_CC_CHIPST_4706_MIPS_BENDIAN BIT(3) /* 0: little, 1: big endian */ + #define BCMA_CC_CHIPST_4706_PCIE1_DISABLE BIT(5) /* PCIE1 enable strap pin */ ++#define BCMA_CC_CHIPST_5357_NAND_BOOT BIT(4) /* NAND boot, valid for CC rev 38 and/or BCM5357 */ + #define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ + #define BCMA_CC_JCMD_START 0x80000000 + #define BCMA_CC_JCMD_BUSY 0x80000000 +@@ -266,6 +267,29 @@ + #define BCMA_CC_SROM_CONTROL_SIZE_16K 0x00000004 + #define BCMA_CC_SROM_CONTROL_SIZE_SHIFT 1 + #define BCMA_CC_SROM_CONTROL_PRESENT 0x00000001 ++/* Block 0x140 - 0x190 registers are chipset specific */ ++#define BCMA_CC_4706_FLASHSCFG 0x18C /* Flash struct configuration */ ++#define BCMA_CC_4706_FLASHSCFG_MASK 0x000000ff ++#define BCMA_CC_4706_FLASHSCFG_SF1 0x00000001 /* 2nd serial flash present */ ++#define BCMA_CC_4706_FLASHSCFG_PF1 0x00000002 /* 2nd parallel flash present */ ++#define BCMA_CC_4706_FLASHSCFG_SF1_TYPE 0x00000004 /* 2nd serial flash type : 0 : ST, 1 : Atmel */ ++#define BCMA_CC_4706_FLASHSCFG_NF1 0x00000008 /* 2nd NAND flash present */ ++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_MASK 0x000000f0 ++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_4MB 0x00000010 /* 4MB */ ++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_8MB 0x00000020 /* 8MB */ ++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_16MB 0x00000030 /* 16MB */ ++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_32MB 0x00000040 /* 32MB */ ++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_64MB 0x00000050 /* 64MB */ ++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_128MB 0x00000060 /* 128MB */ ++#define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_256MB 0x00000070 /* 256MB */ ++/* NAND flash registers for BCM4706 (corerev = 31) */ ++#define BCMA_CC_NFLASH_CTL 0x01A0 ++#define BCMA_CC_NFLASH_CTL_ERR 0x08000000 ++#define BCMA_CC_NFLASH_CONF 0x01A4 ++#define BCMA_CC_NFLASH_COL_ADDR 0x01A8 ++#define BCMA_CC_NFLASH_ROW_ADDR 0x01AC ++#define BCMA_CC_NFLASH_DATA 0x01B0 ++#define BCMA_CC_NFLASH_WAITCNT0 0x01B4 + /* 0x1E0 is defined as shared BCMA_CLKCTLST */ + #define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ + #define BCMA_CC_UART0_DATA 0x0300 +@@ -325,6 +349,60 @@ + #define BCMA_CC_PLLCTL_ADDR 0x0660 + #define BCMA_CC_PLLCTL_DATA 0x0664 + #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ ++/* NAND flash MLC controller registers (corerev >= 38) */ ++#define BCMA_CC_NAND_REVISION 0x0C00 ++#define BCMA_CC_NAND_CMD_START 0x0C04 ++#define BCMA_CC_NAND_CMD_ADDR_X 0x0C08 ++#define BCMA_CC_NAND_CMD_ADDR 0x0C0C ++#define BCMA_CC_NAND_CMD_END_ADDR 0x0C10 ++#define BCMA_CC_NAND_CS_NAND_SELECT 0x0C14 ++#define BCMA_CC_NAND_CS_NAND_XOR 0x0C18 ++#define BCMA_CC_NAND_SPARE_RD0 0x0C20 ++#define BCMA_CC_NAND_SPARE_RD4 0x0C24 ++#define BCMA_CC_NAND_SPARE_RD8 0x0C28 ++#define BCMA_CC_NAND_SPARE_RD12 0x0C2C ++#define BCMA_CC_NAND_SPARE_WR0 0x0C30 ++#define BCMA_CC_NAND_SPARE_WR4 0x0C34 ++#define BCMA_CC_NAND_SPARE_WR8 0x0C38 ++#define BCMA_CC_NAND_SPARE_WR12 0x0C3C ++#define BCMA_CC_NAND_ACC_CONTROL 0x0C40 ++#define BCMA_CC_NAND_CONFIG 0x0C48 ++#define BCMA_CC_NAND_TIMING_1 0x0C50 ++#define BCMA_CC_NAND_TIMING_2 0x0C54 ++#define BCMA_CC_NAND_SEMAPHORE 0x0C58 ++#define BCMA_CC_NAND_DEVID 0x0C60 ++#define BCMA_CC_NAND_DEVID_X 0x0C64 ++#define BCMA_CC_NAND_BLOCK_LOCK_STATUS 0x0C68 ++#define BCMA_CC_NAND_INTFC_STATUS 0x0C6C ++#define BCMA_CC_NAND_ECC_CORR_ADDR_X 0x0C70 ++#define BCMA_CC_NAND_ECC_CORR_ADDR 0x0C74 ++#define BCMA_CC_NAND_ECC_UNC_ADDR_X 0x0C78 ++#define BCMA_CC_NAND_ECC_UNC_ADDR 0x0C7C ++#define BCMA_CC_NAND_READ_ERROR_COUNT 0x0C80 ++#define BCMA_CC_NAND_CORR_STAT_THRESHOLD 0x0C84 ++#define BCMA_CC_NAND_READ_ADDR_X 0x0C90 ++#define BCMA_CC_NAND_READ_ADDR 0x0C94 ++#define BCMA_CC_NAND_PAGE_PROGRAM_ADDR_X 0x0C98 ++#define BCMA_CC_NAND_PAGE_PROGRAM_ADDR 0x0C9C ++#define BCMA_CC_NAND_COPY_BACK_ADDR_X 0x0CA0 ++#define BCMA_CC_NAND_COPY_BACK_ADDR 0x0CA4 ++#define BCMA_CC_NAND_BLOCK_ERASE_ADDR_X 0x0CA8 ++#define BCMA_CC_NAND_BLOCK_ERASE_ADDR 0x0CAC ++#define BCMA_CC_NAND_INV_READ_ADDR_X 0x0CB0 ++#define BCMA_CC_NAND_INV_READ_ADDR 0x0CB4 ++#define BCMA_CC_NAND_BLK_WR_PROTECT 0x0CC0 ++#define BCMA_CC_NAND_ACC_CONTROL_CS1 0x0CD0 ++#define BCMA_CC_NAND_CONFIG_CS1 0x0CD4 ++#define BCMA_CC_NAND_TIMING_1_CS1 0x0CD8 ++#define BCMA_CC_NAND_TIMING_2_CS1 0x0CDC ++#define BCMA_CC_NAND_SPARE_RD16 0x0D30 ++#define BCMA_CC_NAND_SPARE_RD20 0x0D34 ++#define BCMA_CC_NAND_SPARE_RD24 0x0D38 ++#define BCMA_CC_NAND_SPARE_RD28 0x0D3C ++#define BCMA_CC_NAND_CACHE_ADDR 0x0D40 ++#define BCMA_CC_NAND_CACHE_DATA 0x0D44 ++#define BCMA_CC_NAND_CTRL_CONFIG 0x0D48 ++#define BCMA_CC_NAND_CTRL_STATUS 0x0D4C + + /* Divider allocation in 4716/47162/5356 */ + #define BCMA_CC_PMU5_MAINPLL_CPU 1 +@@ -415,6 +493,13 @@ + /* 4313 Chip specific ChipControl register bits */ + #define BCMA_CCTRL_4313_12MA_LED_DRIVE 0x00000007 /* 12 mA drive strengh for later 4313 */ + ++/* BCM5357 ChipControl register bits */ ++#define BCMA_CHIPCTL_5357_EXTPA BIT(14) ++#define BCMA_CHIPCTL_5357_ANT_MUX_2O3 BIT(15) ++#define BCMA_CHIPCTL_5357_NFLASH BIT(16) ++#define BCMA_CHIPCTL_5357_I2S_PINS_ENABLE BIT(18) ++#define BCMA_CHIPCTL_5357_I2CSPI_PINS_ENABLE BIT(19) ++ + /* Data for the PMU, if available. + * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) + */ +@@ -425,11 +510,35 @@ struct bcma_chipcommon_pmu { + + #ifdef CONFIG_BCMA_DRIVER_MIPS + struct bcma_pflash { ++ bool present; + u8 buswidth; + u32 window; + u32 window_size; + }; + ++#ifdef CONFIG_BCMA_SFLASH ++struct bcma_sflash { ++ bool present; ++ u32 window; ++ u32 blocksize; ++ u16 numblocks; ++ u32 size; ++ ++ struct mtd_info *mtd; ++}; ++#endif ++ ++#ifdef CONFIG_BCMA_NFLASH ++struct mtd_info; ++ ++struct bcma_nflash { ++ bool present; ++ bool boot; /* This is the flash the SoC boots from */ ++ ++ struct mtd_info *mtd; ++}; ++#endif ++ + struct bcma_serial_port { + void *regs; + unsigned long clockspeed; +@@ -445,11 +554,18 @@ struct bcma_drv_cc { + u32 capabilities; + u32 capabilities_ext; + u8 setup_done:1; ++ u8 early_setup_done:1; + /* Fast Powerup Delay constant */ + u16 fast_pwrup_delay; + struct bcma_chipcommon_pmu pmu; + #ifdef CONFIG_BCMA_DRIVER_MIPS + struct bcma_pflash pflash; ++#ifdef CONFIG_BCMA_SFLASH ++ struct bcma_sflash sflash; ++#endif ++#ifdef CONFIG_BCMA_NFLASH ++ struct bcma_nflash nflash; ++#endif + + int nr_serial_ports; + struct bcma_serial_port serial_ports[4]; +@@ -470,6 +586,7 @@ struct bcma_drv_cc { + bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set)) + + extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc); ++extern void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc); + + extern void bcma_chipco_suspend(struct bcma_drv_cc *cc); + extern void bcma_chipco_resume(struct bcma_drv_cc *cc); +@@ -493,6 +610,7 @@ u32 bcma_chipco_gpio_polarity(struct bcm + + /* PMU support */ + extern void bcma_pmu_init(struct bcma_drv_cc *cc); ++extern void bcma_pmu_early_init(struct bcma_drv_cc *cc); + + extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, + u32 value); +--- a/include/linux/bcma/bcma_driver_mips.h ++++ b/include/linux/bcma/bcma_driver_mips.h +@@ -35,13 +35,16 @@ struct bcma_device; + struct bcma_drv_mips { + struct bcma_device *core; + u8 setup_done:1; ++ u8 early_setup_done:1; + unsigned int assigned_irqs; + }; + + #ifdef CONFIG_BCMA_DRIVER_MIPS + extern void bcma_core_mips_init(struct bcma_drv_mips *mcore); ++extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore); + #else + static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { } ++static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { } + #endif + + extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); +--- a/include/linux/bcma/bcma_regs.h ++++ b/include/linux/bcma/bcma_regs.h +@@ -11,11 +11,13 @@ + #define BCMA_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */ + #define BCMA_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */ + #define BCMA_CLKCTLST_EXTRESREQ 0x00000700 /* Mask of external resource requests */ ++#define BCMA_CLKCTLST_EXTRESREQ_SHIFT 8 + #define BCMA_CLKCTLST_HAVEALP 0x00010000 /* ALP available */ + #define BCMA_CLKCTLST_HAVEHT 0x00020000 /* HT available */ + #define BCMA_CLKCTLST_BP_ON_ALP 0x00040000 /* RO: running on ALP clock */ + #define BCMA_CLKCTLST_BP_ON_HT 0x00080000 /* RO: running on HT clock */ + #define BCMA_CLKCTLST_EXTRESST 0x07000000 /* Mask of external resource status */ ++#define BCMA_CLKCTLST_EXTRESST_SHIFT 24 + /* Is there any BCM4328 on BCMA bus? */ + #define BCMA_CLKCTLST_4328A0_HAVEHT 0x00010000 /* 4328a0 has reversed bits */ + #define BCMA_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */ +@@ -83,4 +85,9 @@ + * (2 ZettaBytes), high 32 bits + */ + ++#define BCMA_SOC_FLASH1 0x1fc00000 /* MIPS Flash Region 1 */ ++#define BCMA_SOC_FLASH1_SZ 0x00400000 /* MIPS Size of Flash Region 1 */ ++#define BCMA_SOC_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */ ++#define BCMA_SOC_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */ ++ + #endif /* LINUX_BCMA_REGS_H_ */ |