diff options
Diffstat (limited to 'target/linux/generic/patches-3.2/020-ssb_update.patch')
| -rw-r--r-- | target/linux/generic/patches-3.2/020-ssb_update.patch | 289 |
1 files changed, 264 insertions, 25 deletions
diff --git a/target/linux/generic/patches-3.2/020-ssb_update.patch b/target/linux/generic/patches-3.2/020-ssb_update.patch index 1b38e380d..0aabe57a3 100644 --- a/target/linux/generic/patches-3.2/020-ssb_update.patch +++ b/target/linux/generic/patches-3.2/020-ssb_update.patch @@ -1,3 +1,14 @@ +--- a/drivers/ssb/b43_pci_bridge.c ++++ b/drivers/ssb/b43_pci_bridge.c +@@ -29,6 +29,8 @@ static const struct pci_device_id b43_pc + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) }, ++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4322) }, ++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43222) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4324) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4325) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4328) }, --- a/drivers/ssb/driver_chipcommon_pmu.c +++ b/drivers/ssb/driver_chipcommon_pmu.c @@ -13,6 +13,9 @@ @@ -160,7 +171,26 @@ &clkctl_n, &clkctl_m); --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c -@@ -331,7 +331,6 @@ static void sprom_extract_r123(struct ss +@@ -178,6 +178,18 @@ err_pci: + #define SPEX(_outvar, _offset, _mask, _shift) \ + SPEX16(_outvar, _offset, _mask, _shift) + ++#define SPEX_ARRAY8(_field, _offset, _mask, _shift) \ ++ do { \ ++ SPEX(_field[0], _offset + 0, _mask, _shift); \ ++ SPEX(_field[1], _offset + 2, _mask, _shift); \ ++ SPEX(_field[2], _offset + 4, _mask, _shift); \ ++ SPEX(_field[3], _offset + 6, _mask, _shift); \ ++ SPEX(_field[4], _offset + 8, _mask, _shift); \ ++ SPEX(_field[5], _offset + 10, _mask, _shift); \ ++ SPEX(_field[6], _offset + 12, _mask, _shift); \ ++ SPEX(_field[7], _offset + 14, _mask, _shift); \ ++ } while (0) ++ + + static inline u8 ssb_crc8(u8 crc, u8 data) + { +@@ -331,7 +343,6 @@ static void sprom_extract_r123(struct ss { int i; u16 v; @@ -168,8 +198,24 @@ u16 loc[3]; if (out->revision == 3) /* rev 3 moved MAC */ -@@ -390,20 +389,12 @@ static void sprom_extract_r123(struct ss +@@ -361,8 +372,9 @@ static void sprom_extract_r123(struct ss + SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14); + SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15); + SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0); +- SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE, +- SSB_SPROM1_BINF_CCODE_SHIFT); ++ if (out->revision == 1) ++ SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE, ++ SSB_SPROM1_BINF_CCODE_SHIFT); + SPEX(ant_available_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA, + SSB_SPROM1_BINF_ANTA_SHIFT); + SPEX(ant_available_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG, +@@ -388,22 +400,16 @@ static void sprom_extract_r123(struct ss + SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0); + if (out->revision >= 2) SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0); ++ SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8); ++ SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0); /* Extract the antenna gain values. */ - gain = r123_extract_antgain(out->revision, in, @@ -195,7 +241,27 @@ } /* Revs 4 5 and 8 have partially shared layout */ -@@ -504,16 +495,14 @@ static void sprom_extract_r45(struct ssb +@@ -464,14 +470,17 @@ static void sprom_extract_r45(struct ssb + SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0); + SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A, + SSB_SPROM4_ETHPHY_ET1A_SHIFT); ++ SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0); + if (out->revision == 4) { +- SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0); ++ SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8); ++ SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0); + SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0); + SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0); + SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0); + SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0); + } else { +- SPEX(country_code, SSB_SPROM5_CCODE, 0xFFFF, 0); ++ SPEX(alpha2[0], SSB_SPROM5_CCODE, 0xff00, 8); ++ SPEX(alpha2[1], SSB_SPROM5_CCODE, 0x00ff, 0); + SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0); + SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0); + SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0); +@@ -504,16 +513,14 @@ static void sprom_extract_r45(struct ssb } /* Extract the antenna gain values. */ @@ -216,7 +282,7 @@ sprom_extract_r458(out, in); -@@ -523,7 +512,13 @@ static void sprom_extract_r45(struct ssb +@@ -523,14 +530,22 @@ static void sprom_extract_r45(struct ssb static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) { int i; @@ -231,7 +297,17 @@ /* extract the MAC address */ for (i = 0; i < 3; i++) { -@@ -596,16 +591,69 @@ static void sprom_extract_r8(struct ssb_ + v = in[SPOFF(SSB_SPROM8_IL0MAC) + i]; + *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v); + } +- SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0); ++ SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0); ++ SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8); ++ SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0); + SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0); + SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0); + SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0); +@@ -596,17 +611,127 @@ static void sprom_extract_r8(struct ssb_ SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0); /* Extract the antenna gain values. */ @@ -249,7 +325,7 @@ SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT); - memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, - sizeof(out->antenna_gain.ghz5)); -+ + + /* Extract cores power info info */ + for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { + o = pwr_info_offset[i]; @@ -304,9 +380,75 @@ + SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); + SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, + SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); - ++ ++ SPEX(leddc_on_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_ON, ++ SSB_SPROM8_LEDDC_ON_SHIFT); ++ SPEX(leddc_off_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_OFF, ++ SSB_SPROM8_LEDDC_OFF_SHIFT); ++ ++ SPEX(txchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_TXCHAIN, ++ SSB_SPROM8_TXRXC_TXCHAIN_SHIFT); ++ SPEX(rxchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_RXCHAIN, ++ SSB_SPROM8_TXRXC_RXCHAIN_SHIFT); ++ SPEX(antswitch, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_SWITCH, ++ SSB_SPROM8_TXRXC_SWITCH_SHIFT); ++ ++ SPEX(opo, SSB_SPROM8_OFDM2GPO, 0x00ff, 0); ++ ++ SPEX_ARRAY8(mcs2gpo, SSB_SPROM8_2G_MCSPO, ~0, 0); ++ SPEX_ARRAY8(mcs5gpo, SSB_SPROM8_5G_MCSPO, ~0, 0); ++ SPEX_ARRAY8(mcs5glpo, SSB_SPROM8_5GL_MCSPO, ~0, 0); ++ SPEX_ARRAY8(mcs5ghpo, SSB_SPROM8_5GH_MCSPO, ~0, 0); ++ ++ SPEX(rawtempsense, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_RAWTEMP, ++ SSB_SPROM8_RAWTS_RAWTEMP_SHIFT); ++ SPEX(measpower, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_MEASPOWER, ++ SSB_SPROM8_RAWTS_MEASPOWER_SHIFT); ++ SPEX(tempsense_slope, SSB_SPROM8_OPT_CORRX, ++ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE, ++ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT); ++ SPEX(tempcorrx, SSB_SPROM8_OPT_CORRX, SSB_SPROM8_OPT_CORRX_TEMPCORRX, ++ SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT); ++ SPEX(tempsense_option, SSB_SPROM8_OPT_CORRX, ++ SSB_SPROM8_OPT_CORRX_TEMP_OPTION, ++ SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT); ++ SPEX(freqoffset_corr, SSB_SPROM8_HWIQ_IQSWP, ++ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR, ++ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT); ++ SPEX(iqcal_swp_dis, SSB_SPROM8_HWIQ_IQSWP, ++ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP, ++ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT); ++ SPEX(hw_iqcal_en, SSB_SPROM8_HWIQ_IQSWP, SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL, ++ SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT); ++ ++ SPEX(bw40po, SSB_SPROM8_BW40PO, ~0, 0); ++ SPEX(cddpo, SSB_SPROM8_CDDPO, ~0, 0); ++ SPEX(stbcpo, SSB_SPROM8_STBCPO, ~0, 0); ++ SPEX(bwduppo, SSB_SPROM8_BWDUPPO, ~0, 0); ++ ++ SPEX(tempthresh, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_TRESH, ++ SSB_SPROM8_THERMAL_TRESH_SHIFT); ++ SPEX(tempoffset, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_OFFSET, ++ SSB_SPROM8_THERMAL_OFFSET_SHIFT); ++ SPEX(phycal_tempdelta, SSB_SPROM8_TEMPDELTA, ++ SSB_SPROM8_TEMPDELTA_PHYCAL, ++ SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT); ++ SPEX(temps_period, SSB_SPROM8_TEMPDELTA, SSB_SPROM8_TEMPDELTA_PERIOD, ++ SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT); ++ SPEX(temps_hysteresis, SSB_SPROM8_TEMPDELTA, ++ SSB_SPROM8_TEMPDELTA_HYSTERESIS, ++ SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT); sprom_extract_r458(out, in); + /* TODO - get remaining rev 8 stuff needed */ +@@ -736,7 +861,6 @@ static void ssb_pci_get_boardinfo(struct + { + bi->vendor = bus->host_pci->subsystem_vendor; + bi->type = bus->host_pci->subsystem_device; +- bi->rev = bus->host_pci->revision; + } + + int ssb_pci_get_invariants(struct ssb_bus *bus, --- a/drivers/ssb/pcmcia.c +++ b/drivers/ssb/pcmcia.c @@ -676,14 +676,10 @@ static int ssb_pcmcia_do_get_invariants( @@ -428,7 +570,7 @@ u8 rssisav2g; /* 2GHz RSSI params */ u8 rssismc2g; u8 rssismf2g; -@@ -82,19 +91,97 @@ struct ssb_sprom { +@@ -82,26 +91,103 @@ struct ssb_sprom { u16 boardflags2_hi; /* Board flags (bits 48-63) */ /* TODO store board flags in a single u64 */ @@ -438,19 +580,21 @@ * on each band. Values in dBm/4 (Q5.2). Negative gain means the * loss in the connectors is bigger than the gain. */ struct { -+ s8 a0, a1, a2, a3; -+ } antenna_gain; -+ -+ struct { - struct { +- struct { - s8 a0, a1, a2, a3; - } ghz24; /* 2.4GHz band */ -+ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; -+ } ghz2; - struct { +- struct { - s8 a0, a1, a2, a3; - } ghz5; /* 5GHz band */ -- } antenna_gain; ++ s8 a0, a1, a2, a3; + } antenna_gain; + +- /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ ++ struct { ++ struct { ++ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; ++ } ghz2; ++ struct { + u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; + } ghz5; + } fem; @@ -500,8 +644,7 @@ + u8 measpower1; + u8 measpower2; + u8 pcieingress_war; - -- /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ ++ + /* power per rate from sromrev 9 */ + u16 cckbw202gpo; + u16 cckbw20ul2gpo; @@ -532,6 +675,13 @@ }; /* Information about the PCB the circuitry is soldered on. */ + struct ssb_boardinfo { + u16 vendor; + u16 type; +- u8 rev; + }; + + --- a/include/linux/ssb/ssb_driver_gige.h +++ b/include/linux/ssb/ssb_driver_gige.h @@ -2,6 +2,7 @@ @@ -544,8 +694,53 @@ --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h -@@ -432,6 +432,56 @@ +@@ -228,6 +228,7 @@ + #define SSB_SPROM1_AGAIN_BG_SHIFT 0 + #define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */ + #define SSB_SPROM1_AGAIN_A_SHIFT 8 ++#define SSB_SPROM1_CCODE 0x0076 + + /* SPROM Revision 2 (inherits from rev 1) */ + #define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */ +@@ -267,6 +268,7 @@ + #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */ + + /* SPROM Revision 4 */ ++#define SSB_SPROM4_BOARDREV 0x0042 /* Board revision */ + #define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */ + #define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */ + #define SSB_SPROM4_BFL2LO 0x0048 /* Board flags 2 (low 16 bits) */ +@@ -389,6 +391,11 @@ + #define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ + #define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ + #define SSB_SPROM8_GPIOB_P3_SHIFT 8 ++#define SSB_SPROM8_LEDDC 0x009A ++#define SSB_SPROM8_LEDDC_ON 0xFF00 /* oncount */ ++#define SSB_SPROM8_LEDDC_ON_SHIFT 8 ++#define SSB_SPROM8_LEDDC_OFF 0x00FF /* offcount */ ++#define SSB_SPROM8_LEDDC_OFF_SHIFT 0 + #define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/ + #define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ + #define SSB_SPROM8_ANTAVAIL_A_SHIFT 8 +@@ -404,6 +411,13 @@ + #define SSB_SPROM8_AGAIN2_SHIFT 0 + #define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */ + #define SSB_SPROM8_AGAIN3_SHIFT 8 ++#define SSB_SPROM8_TXRXC 0x00A2 ++#define SSB_SPROM8_TXRXC_TXCHAIN 0x000f ++#define SSB_SPROM8_TXRXC_TXCHAIN_SHIFT 0 ++#define SSB_SPROM8_TXRXC_RXCHAIN 0x00f0 ++#define SSB_SPROM8_TXRXC_RXCHAIN_SHIFT 4 ++#define SSB_SPROM8_TXRXC_SWITCH 0xff00 ++#define SSB_SPROM8_TXRXC_SWITCH_SHIFT 8 + #define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */ + #define SSB_SPROM8_RSSISMF2G 0x000F + #define SSB_SPROM8_RSSISMC2G 0x00F0 +@@ -430,8 +444,87 @@ + #define SSB_SPROM8_TRI5GH_SHIFT 8 + #define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */ #define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ ++#define SSB_SPROM8_RXPO2G_SHIFT 0 #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ #define SSB_SPROM8_RXPO5G_SHIFT 8 +#define SSB_SPROM8_FEM2G 0x00AE @@ -561,10 +756,38 @@ +#define SSB_SROM8_FEM_ANTSWLUT 0xF800 +#define SSB_SROM8_FEM_ANTSWLUT_SHIFT 11 +#define SSB_SPROM8_THERMAL 0x00B2 -+#define SSB_SPROM8_MPWR_RAWTS 0x00B4 -+#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 -+#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 -+#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA ++#define SSB_SPROM8_THERMAL_OFFSET 0x00ff ++#define SSB_SPROM8_THERMAL_OFFSET_SHIFT 0 ++#define SSB_SPROM8_THERMAL_TRESH 0xff00 ++#define SSB_SPROM8_THERMAL_TRESH_SHIFT 8 ++/* Temp sense related entries */ ++#define SSB_SPROM8_RAWTS 0x00B4 ++#define SSB_SPROM8_RAWTS_RAWTEMP 0x01ff ++#define SSB_SPROM8_RAWTS_RAWTEMP_SHIFT 0 ++#define SSB_SPROM8_RAWTS_MEASPOWER 0xfe00 ++#define SSB_SPROM8_RAWTS_MEASPOWER_SHIFT 9 ++#define SSB_SPROM8_OPT_CORRX 0x00B6 ++#define SSB_SPROM8_OPT_CORRX_TEMP_SLOPE 0x00ff ++#define SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT 0 ++#define SSB_SPROM8_OPT_CORRX_TEMPCORRX 0xfc00 ++#define SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT 10 ++#define SSB_SPROM8_OPT_CORRX_TEMP_OPTION 0x0300 ++#define SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT 8 ++/* FOC: freiquency offset correction, HWIQ: H/W IOCAL enable, IQSWP: IQ CAL swap disable */ ++#define SSB_SPROM8_HWIQ_IQSWP 0x00B8 ++#define SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR 0x000f ++#define SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT 0 ++#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP 0x0010 ++#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT 4 ++#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL 0x0020 ++#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT 5 ++#define SSB_SPROM8_TEMPDELTA 0x00BA ++#define SSB_SPROM8_TEMPDELTA_PHYCAL 0x00ff ++#define SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT 0 ++#define SSB_SPROM8_TEMPDELTA_PERIOD 0x0f00 ++#define SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT 8 ++#define SSB_SPROM8_TEMPDELTA_HYSTERESIS 0xf000 ++#define SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT 12 + +/* There are 4 blocks with power info sharing the same layout */ +#define SSB_SROM8_PWR_INFO_CORE0 0x00C0 @@ -601,7 +824,7 @@ #define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ -@@ -456,6 +506,7 @@ +@@ -456,12 +549,23 @@ #define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */ #define SSB_SPROM8_PA1HIB1 0x00DA #define SSB_SPROM8_PA1HIB2 0x00DC @@ -609,3 +832,19 @@ #define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */ #define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */ #define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ + #define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ + #define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ + ++#define SSB_SPROM8_2G_MCSPO 0x0152 ++#define SSB_SPROM8_5G_MCSPO 0x0162 ++#define SSB_SPROM8_5GL_MCSPO 0x0172 ++#define SSB_SPROM8_5GH_MCSPO 0x0182 ++ ++#define SSB_SPROM8_CDDPO 0x0192 ++#define SSB_SPROM8_STBCPO 0x0194 ++#define SSB_SPROM8_BW40PO 0x0196 ++#define SSB_SPROM8_BWDUPPO 0x0198 ++ + /* Values for boardflags_lo read from SPROM */ + #define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ + #define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ |