diff options
Diffstat (limited to 'target/linux/generic/patches-2.6.30/025-bcma_backport.patch')
| -rw-r--r-- | target/linux/generic/patches-2.6.30/025-bcma_backport.patch | 2715 |
1 files changed, 2715 insertions, 0 deletions
diff --git a/target/linux/generic/patches-2.6.30/025-bcma_backport.patch b/target/linux/generic/patches-2.6.30/025-bcma_backport.patch new file mode 100644 index 000000000..f9c994a60 --- /dev/null +++ b/target/linux/generic/patches-2.6.30/025-bcma_backport.patch @@ -0,0 +1,2715 @@ +--- /dev/null ++++ b/Documentation/ABI/testing/sysfs-bus-bcma +@@ -0,0 +1,31 @@ ++What: /sys/bus/bcma/devices/.../manuf ++Date: May 2011 ++KernelVersion: 2.6.40 ++Contact: Rafał Miłecki <zajec5@gmail.com> ++Description: ++ Each BCMA core has it's manufacturer id. See ++ include/linux/bcma/bcma.h for possible values. ++ ++What: /sys/bus/bcma/devices/.../id ++Date: May 2011 ++KernelVersion: 2.6.40 ++Contact: Rafał Miłecki <zajec5@gmail.com> ++Description: ++ There are a few types of BCMA cores, they can be identified by ++ id field. ++ ++What: /sys/bus/bcma/devices/.../rev ++Date: May 2011 ++KernelVersion: 2.6.40 ++Contact: Rafał Miłecki <zajec5@gmail.com> ++Description: ++ BCMA cores of the same type can still slightly differ depending ++ on their revision. Use it for detailed programming. ++ ++What: /sys/bus/bcma/devices/.../class ++Date: May 2011 ++KernelVersion: 2.6.40 ++Contact: Rafał Miłecki <zajec5@gmail.com> ++Description: ++ Each BCMA core is identified by few fields, including class it ++ belongs to. See include/linux/bcma/bcma.h for possible values. +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -5264,6 +5264,13 @@ S: Maintained + F: drivers/ssb/ + F: include/linux/ssb/ + ++BROADCOM SPECIFIC AMBA DRIVER (BCMA) ++M: Rafał Miłecki <zajec5@gmail.com> ++L: linux-wireless@vger.kernel.org ++S: Maintained ++F: drivers/bcma/ ++F: include/linux/bcma/ ++ + SONY VAIO CONTROL DEVICE DRIVER + P: Mattia Dongili + M: malattia@linux.it +--- a/drivers/Kconfig ++++ b/drivers/Kconfig +@@ -66,6 +66,8 @@ source "drivers/watchdog/Kconfig" + + source "drivers/ssb/Kconfig" + ++source "drivers/bcma/Kconfig" ++ + source "drivers/mfd/Kconfig" + + source "drivers/regulator/Kconfig" +--- a/drivers/Makefile ++++ b/drivers/Makefile +@@ -104,6 +104,7 @@ obj-$(CONFIG_HID) += hid/ + obj-$(CONFIG_PPC_PS3) += ps3/ + obj-$(CONFIG_OF) += of/ + obj-$(CONFIG_SSB) += ssb/ ++obj-$(CONFIG_BCMA) += bcma/ + obj-$(CONFIG_VIRTIO) += virtio/ + obj-$(CONFIG_STAGING) += staging/ + obj-y += platform/ +--- /dev/null ++++ b/drivers/bcma/Kconfig +@@ -0,0 +1,44 @@ ++config BCMA_POSSIBLE ++ bool ++ depends on HAS_IOMEM && HAS_DMA ++ default y ++ ++menu "Broadcom specific AMBA" ++ depends on BCMA_POSSIBLE ++ ++config BCMA ++ tristate "BCMA support" ++ depends on BCMA_POSSIBLE ++ help ++ Bus driver for Broadcom specific Advanced Microcontroller Bus ++ Architecture. ++ ++# Support for Block-I/O. SELECT this from the driver that needs it. ++config BCMA_BLOCKIO ++ bool ++ depends on BCMA ++ ++config BCMA_HOST_PCI_POSSIBLE ++ bool ++ depends on BCMA && PCI = y ++ default y ++ ++config BCMA_HOST_PCI ++ bool "Support for BCMA on PCI-host bus" ++ depends on BCMA_HOST_PCI_POSSIBLE ++ ++config BCMA_DRIVER_PCI_HOSTMODE ++ bool "Driver for PCI core working in hostmode" ++ depends on BCMA && MIPS ++ help ++ PCI core hostmode operation (external PCI bus). ++ ++config BCMA_DEBUG ++ bool "BCMA debugging" ++ depends on BCMA ++ help ++ This turns on additional debugging messages. ++ ++ If unsure, say N ++ ++endmenu +--- /dev/null ++++ b/drivers/bcma/Makefile +@@ -0,0 +1,8 @@ ++bcma-y += main.o scan.o core.o sprom.o ++bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o ++bcma-y += driver_pci.o ++bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o ++bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o ++obj-$(CONFIG_BCMA) += bcma.o ++ ++ccflags-$(CONFIG_BCMA_DEBUG) := -DDEBUG +--- /dev/null ++++ b/drivers/bcma/README +@@ -0,0 +1,19 @@ ++Broadcom introduced new bus as replacement for older SSB. It is based on AMBA, ++however from programming point of view there is nothing AMBA specific we use. ++ ++Standard AMBA drivers are platform specific, have hardcoded addresses and use ++AMBA standard fields like CID and PID. ++ ++In case of Broadcom's cards every device consists of: ++1) Broadcom specific AMBA device. It is put on AMBA bus, but can not be treated ++ as standard AMBA device. Reading it's CID or PID can cause machine lockup. ++2) AMBA standard devices called ports or wrappers. They have CIDs (AMBA_CID) ++ and PIDs (0x103BB369), but we do not use that info for anything. One of that ++ devices is used for managing Broadcom specific core. ++ ++Addresses of AMBA devices are not hardcoded in driver and have to be read from ++EPROM. ++ ++In this situation we decided to introduce separated bus. It can contain up to ++16 devices identified by Broadcom specific fields: manufacturer, id, revision ++and class. +--- /dev/null ++++ b/drivers/bcma/TODO +@@ -0,0 +1,3 @@ ++- Interrupts ++- Defines for PCI core driver ++- Create kernel Documentation (use info from README) +--- /dev/null ++++ b/drivers/bcma/bcma_private.h +@@ -0,0 +1,35 @@ ++#ifndef LINUX_BCMA_PRIVATE_H_ ++#define LINUX_BCMA_PRIVATE_H_ ++ ++#ifndef pr_fmt ++#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt ++#endif ++ ++#include <linux/bcma/bcma.h> ++#include <linux/delay.h> ++ ++#define BCMA_CORE_SIZE 0x1000 ++ ++struct bcma_bus; ++ ++/* main.c */ ++int bcma_bus_register(struct bcma_bus *bus); ++void bcma_bus_unregister(struct bcma_bus *bus); ++ ++/* scan.c */ ++int bcma_bus_scan(struct bcma_bus *bus); ++ ++/* sprom.c */ ++int bcma_sprom_get(struct bcma_bus *bus); ++ ++#ifdef CONFIG_BCMA_HOST_PCI ++/* host_pci.c */ ++extern int __init bcma_host_pci_init(void); ++extern void __exit bcma_host_pci_exit(void); ++#endif /* CONFIG_BCMA_HOST_PCI */ ++ ++#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); ++#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ ++ ++#endif +--- /dev/null ++++ b/drivers/bcma/core.c +@@ -0,0 +1,124 @@ ++/* ++ * Broadcom specific AMBA ++ * Core ops ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++#include <linux/bcma/bcma.h> ++ ++bool bcma_core_is_enabled(struct bcma_device *core) ++{ ++ if ((bcma_aread32(core, BCMA_IOCTL) & (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC)) ++ != BCMA_IOCTL_CLK) ++ return false; ++ if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET) ++ return false; ++ return true; ++} ++EXPORT_SYMBOL_GPL(bcma_core_is_enabled); ++ ++void bcma_core_disable(struct bcma_device *core, u32 flags) ++{ ++ if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET) ++ return; ++ ++ bcma_awrite32(core, BCMA_IOCTL, flags); ++ bcma_aread32(core, BCMA_IOCTL); ++ udelay(10); ++ ++ bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET); ++ udelay(1); ++} ++EXPORT_SYMBOL_GPL(bcma_core_disable); ++ ++int bcma_core_enable(struct bcma_device *core, u32 flags) ++{ ++ bcma_core_disable(core, flags); ++ ++ bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC | flags)); ++ bcma_aread32(core, BCMA_IOCTL); ++ ++ bcma_awrite32(core, BCMA_RESET_CTL, 0); ++ udelay(1); ++ ++ bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags)); ++ bcma_aread32(core, BCMA_IOCTL); ++ udelay(1); ++ ++ return 0; ++} ++EXPORT_SYMBOL_GPL(bcma_core_enable); ++ ++void bcma_core_set_clockmode(struct bcma_device *core, ++ enum bcma_clkmode clkmode) ++{ ++ u16 i; ++ ++ WARN_ON(core->id.id != BCMA_CORE_CHIPCOMMON && ++ core->id.id != BCMA_CORE_PCIE && ++ core->id.id != BCMA_CORE_80211); ++ ++ switch (clkmode) { ++ case BCMA_CLKMODE_FAST: ++ bcma_set32(core, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT); ++ udelay(64); ++ for (i = 0; i < 1500; i++) { ++ if (bcma_read32(core, BCMA_CLKCTLST) & ++ BCMA_CLKCTLST_HAVEHT) { ++ i = 0; ++ break; ++ } ++ udelay(10); ++ } ++ if (i) ++ pr_err("HT force timeout\n"); ++ break; ++ case BCMA_CLKMODE_DYNAMIC: ++ pr_warning("Dynamic clockmode not supported yet!\n"); ++ break; ++ } ++} ++EXPORT_SYMBOL_GPL(bcma_core_set_clockmode); ++ ++void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status, bool on) ++{ ++ u16 i; ++ ++ WARN_ON(req & ~BCMA_CLKCTLST_EXTRESREQ); ++ WARN_ON(status & ~BCMA_CLKCTLST_EXTRESST); ++ ++ if (on) { ++ bcma_set32(core, BCMA_CLKCTLST, req); ++ for (i = 0; i < 10000; i++) { ++ if ((bcma_read32(core, BCMA_CLKCTLST) & status) == ++ status) { ++ i = 0; ++ break; ++ } ++ udelay(10); ++ } ++ if (i) ++ pr_err("PLL enable timeout\n"); ++ } else { ++ pr_warning("Disabling PLL not supported yet!\n"); ++ } ++} ++EXPORT_SYMBOL_GPL(bcma_core_pll_ctl); ++ ++u32 bcma_core_dma_translation(struct bcma_device *core) ++{ ++ switch (core->bus->hosttype) { ++ case BCMA_HOSTTYPE_PCI: ++ if (bcma_aread32(core, BCMA_IOST) & BCMA_IOST_DMA64) ++ return BCMA_DMA_TRANSLATION_DMA64_CMT; ++ else ++ return BCMA_DMA_TRANSLATION_DMA32_CMT; ++ default: ++ pr_err("DMA translation unknown for host %d\n", ++ core->bus->hosttype); ++ } ++ return BCMA_DMA_TRANSLATION_NONE; ++} ++EXPORT_SYMBOL(bcma_core_dma_translation); +--- /dev/null ++++ b/drivers/bcma/driver_chipcommon.c +@@ -0,0 +1,103 @@ ++/* ++ * Broadcom specific AMBA ++ * ChipCommon core driver ++ * ++ * Copyright 2005, Broadcom Corporation ++ * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de> ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++#include <linux/bcma/bcma.h> ++ ++static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset, ++ u32 mask, u32 value) ++{ ++ value &= mask; ++ value |= bcma_cc_read32(cc, offset) & ~mask; ++ bcma_cc_write32(cc, offset, value); ++ ++ return value; ++} ++ ++void bcma_core_chipcommon_init(struct bcma_drv_cc *cc) ++{ ++ u32 leddc_on = 10; ++ u32 leddc_off = 90; ++ ++ if (cc->core->id.rev >= 11) ++ cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); ++ cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP); ++ if (cc->core->id.rev >= 35) ++ cc->capabilities_ext = bcma_cc_read32(cc, BCMA_CC_CAP_EXT); ++ ++ if (cc->core->id.rev >= 20) { ++ bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0); ++ bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0); ++ } ++ ++ if (cc->capabilities & BCMA_CC_CAP_PMU) ++ bcma_pmu_init(cc); ++ if (cc->capabilities & BCMA_CC_CAP_PCTL) ++ pr_err("Power control not implemented!\n"); ++ ++ if (cc->core->id.rev >= 16) { ++ if (cc->core->bus->sprom.leddc_on_time && ++ cc->core->bus->sprom.leddc_off_time) { ++ leddc_on = cc->core->bus->sprom.leddc_on_time; ++ leddc_off = cc->core->bus->sprom.leddc_off_time; ++ } ++ bcma_cc_write32(cc, BCMA_CC_GPIOTIMER, ++ ((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) | ++ (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT))); ++ } ++} ++ ++/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */ ++void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks) ++{ ++ /* instant NMI */ ++ bcma_cc_write32(cc, BCMA_CC_WATCHDOG, ticks); ++} ++ ++void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value) ++{ ++ bcma_cc_write32_masked(cc, BCMA_CC_IRQMASK, mask, value); ++} ++ ++u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask) ++{ ++ return bcma_cc_read32(cc, BCMA_CC_IRQSTAT) & mask; ++} ++ ++u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask) ++{ ++ return bcma_cc_read32(cc, BCMA_CC_GPIOIN) & mask; ++} ++ ++u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value) ++{ ++ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value); ++} ++ ++u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value) ++{ ++ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value); ++} ++ ++u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value) ++{ ++ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOCTL, mask, value); ++} ++EXPORT_SYMBOL_GPL(bcma_chipco_gpio_control); ++ ++u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value) ++{ ++ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value); ++} ++ ++u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value) ++{ ++ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value); ++} +--- /dev/null ++++ b/drivers/bcma/driver_chipcommon_pmu.c +@@ -0,0 +1,138 @@ ++/* ++ * Broadcom specific AMBA ++ * ChipCommon Power Management Unit driver ++ * ++ * Copyright 2009, Michael Buesch <mb@bu3sch.de> ++ * Copyright 2007, Broadcom Corporation ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++#include <linux/bcma/bcma.h> ++ ++static void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, ++ u32 offset, u32 mask, u32 set) ++{ ++ u32 value; ++ ++ bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR); ++ bcma_cc_write32(cc, BCMA_CC_CHIPCTL_ADDR, offset); ++ bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR); ++ value = bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA); ++ value &= mask; ++ value |= set; ++ bcma_cc_write32(cc, BCMA_CC_CHIPCTL_DATA, value); ++ bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA); ++} ++ ++static void bcma_pmu_pll_init(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ ++ switch (bus->chipinfo.id) { ++ case 0x4313: ++ case 0x4331: ++ case 43224: ++ case 43225: ++ break; ++ default: ++ pr_err("PLL init unknown for device 0x%04X\n", ++ bus->chipinfo.id); ++ } ++} ++ ++static void bcma_pmu_resources_init(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ u32 min_msk = 0, max_msk = 0; ++ ++ switch (bus->chipinfo.id) { ++ case 0x4313: ++ min_msk = 0x200D; ++ max_msk = 0xFFFF; ++ break; ++ case 43224: ++ case 43225: ++ break; ++ default: ++ pr_err("PMU resource config unknown for device 0x%04X\n", ++ bus->chipinfo.id); ++ } ++ ++ /* Set the resource masks. */ ++ if (min_msk) ++ bcma_cc_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk); ++ if (max_msk) ++ bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk); ++} ++ ++void bcma_pmu_swreg_init(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ ++ switch (bus->chipinfo.id) { ++ case 0x4313: ++ case 0x4331: ++ case 43224: ++ case 43225: ++ break; ++ default: ++ pr_err("PMU switch/regulators init unknown for device " ++ "0x%04X\n", bus->chipinfo.id); ++ } ++} ++ ++void bcma_pmu_workarounds(struct bcma_drv_cc *cc) ++{ ++ struct bcma_bus *bus = cc->core->bus; ++ ++ switch (bus->chipinfo.id) { ++ case 0x4313: ++ bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7); ++ break; ++ case 0x4331: ++ pr_err("Enabling Ext PA lines not implemented\n"); ++ break; ++ case 43224: ++ if (bus->chipinfo.rev == 0) { ++ pr_err("Workarounds for 43224 rev 0 not fully " ++ "implemented\n"); ++ bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x00F000F0); ++ } else { ++ bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0); ++ } ++ break; ++ case 43225: ++ break; ++ default: ++ pr_err("Workarounds unknown for device 0x%04X\n", ++ bus->chipinfo.id); ++ } ++} ++ ++void bcma_pmu_init(struct bcma_drv_cc *cc) ++{ ++ u32 pmucap; ++ ++ pmucap = bcma_cc_read32(cc, BCMA_CC_PMU_CAP); ++ cc->pmu.rev = (pmucap & BCMA_CC_PMU_CAP_REVISION); ++ ++ pr_debug("Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev, ++ pmucap); ++ ++ if (cc->pmu.rev == 1) ++ bcma_cc_mask32(cc, BCMA_CC_PMU_CTL, ++ ~BCMA_CC_PMU_CTL_NOILPONW); ++ else ++ bcma_cc_set32(cc, BCMA_CC_PMU_CTL, ++ BCMA_CC_PMU_CTL_NOILPONW); ++ ++ if (cc->core->id.id == 0x4329 && cc->core->id.rev == 2) ++ pr_err("Fix for 4329b0 bad LPOM state not implemented!\n"); ++ ++ bcma_pmu_pll_init(cc); ++ bcma_pmu_resources_init(cc); ++ bcma_pmu_swreg_init(cc); ++ bcma_pmu_workarounds(cc); ++} +--- /dev/null ++++ b/drivers/bcma/driver_pci.c +@@ -0,0 +1,223 @@ ++/* ++ * Broadcom specific AMBA ++ * PCI Core ++ * ++ * Copyright 2005, Broadcom Corporation ++ * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de> ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++#include <linux/bcma/bcma.h> ++ ++/************************************************** ++ * R/W ops. ++ **************************************************/ ++ ++static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) ++{ ++ pcicore_write32(pc, 0x130, address); ++ pcicore_read32(pc, 0x130); ++ return pcicore_read32(pc, 0x134); ++} ++ ++#if 0 ++static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data) ++{ ++ pcicore_write32(pc, 0x130, address); ++ pcicore_read32(pc, 0x130); ++ pcicore_write32(pc, 0x134, data); ++} ++#endif ++ ++static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) ++{ ++ const u16 mdio_control = 0x128; ++ const u16 mdio_data = 0x12C; ++ u32 v; ++ int i; ++ ++ v = (1 << 30); /* Start of Transaction */ ++ v |= (1 << 28); /* Write Transaction */ ++ v |= (1 << 17); /* Turnaround */ ++ v |= (0x1F << 18); ++ v |= (phy << 4); ++ pcicore_write32(pc, mdio_data, v); ++ ++ udelay(10); ++ for (i = 0; i < 200; i++) { ++ v = pcicore_read32(pc, mdio_control); ++ if (v & 0x100 /* Trans complete */) ++ break; ++ msleep(1); ++ } ++} ++ ++static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) ++{ ++ const u16 mdio_control = 0x128; ++ const u16 mdio_data = 0x12C; ++ int max_retries = 10; ++ u16 ret = 0; ++ u32 v; ++ int i; ++ ++ v = 0x80; /* Enable Preamble Sequence */ ++ v |= 0x2; /* MDIO Clock Divisor */ ++ pcicore_write32(pc, mdio_control, v); ++ ++ if (pc->core->id.rev >= 10) { ++ max_retries = 200; ++ bcma_pcie_mdio_set_phy(pc, device); ++ } ++ ++ v = (1 << 30); /* Start of Transaction */ ++ v |= (1 << 29); /* Read Transaction */ ++ v |= (1 << 17); /* Turnaround */ ++ if (pc->core->id.rev < 10) ++ v |= (u32)device << 22; ++ v |= (u32)address << 18; ++ pcicore_write32(pc, mdio_data, v); ++ /* Wait for the device to complete the transaction */ ++ udelay(10); ++ for (i = 0; i < max_retries; i++) { ++ v = pcicore_read32(pc, mdio_control); ++ if (v & 0x100 /* Trans complete */) { ++ udelay(10); ++ ret = pcicore_read32(pc, mdio_data); ++ break; ++ } ++ msleep(1); ++ } ++ pcicore_write32(pc, mdio_control, 0); ++ return ret; ++} ++ ++static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, ++ u8 address, u16 data) ++{ ++ const u16 mdio_control = 0x128; ++ const u16 mdio_data = 0x12C; ++ int max_retries = 10; ++ u32 v; ++ int i; ++ ++ v = 0x80; /* Enable Preamble Sequence */ ++ v |= 0x2; /* MDIO Clock Divisor */ ++ pcicore_write32(pc, mdio_control, v); ++ ++ if (pc->core->id.rev >= 10) { ++ max_retries = 200; ++ bcma_pcie_mdio_set_phy(pc, device); ++ } ++ ++ v = (1 << 30); /* Start of Transaction */ ++ v |= (1 << 28); /* Write Transaction */ ++ v |= (1 << 17); /* Turnaround */ ++ if (pc->core->id.rev < 10) ++ v |= (u32)device << 22; ++ v |= (u32)address << 18; ++ v |= data; ++ pcicore_write32(pc, mdio_data, v); ++ /* Wait for the device to complete the transaction */ ++ udelay(10); ++ for (i = 0; i < max_retries; i++) { ++ v = pcicore_read32(pc, mdio_control); ++ if (v & 0x100 /* Trans complete */) ++ break; ++ msleep(1); ++ } ++ pcicore_write32(pc, mdio_control, 0); ++} ++ ++/************************************************** ++ * Workarounds. ++ **************************************************/ ++ ++static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc) ++{ ++ return (bcma_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80; ++} ++ ++static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc) ++{ ++ const u8 serdes_pll_device = 0x1D; ++ const u8 serdes_rx_device = 0x1F; ++ u16 tmp; ++ ++ bcma_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */, ++ bcma_pcicore_polarity_workaround(pc)); ++ tmp = bcma_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */); ++ if (tmp & 0x4000) ++ bcma_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000); ++} ++ ++/************************************************** ++ * Init. ++ **************************************************/ ++ ++static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) ++{ ++ bcma_pcicore_serdes_workaround(pc); ++} ++ ++static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) ++{ ++ struct bcma_bus *bus = pc->core->bus; ++ u16 chipid_top; ++ ++ chipid_top = (bus->chipinfo.id & 0xFF00); ++ if (chipid_top != 0x4700 && ++ chipid_top != 0x5300) ++ return false; ++ ++ if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI) ++ return false; ++ ++#if 0 ++ /* TODO: on BCMA we use address from EROM instead of magic formula */ ++ u32 tmp; ++ return !mips_busprobe32(tmp, (bus->mmio + ++ (pc->core->core_index * BCMA_CORE_SIZE))); ++#endif ++ ++ return true; ++} ++ ++void bcma_core_pci_init(struct bcma_drv_pci *pc) ++{ ++ if (bcma_core_pci_is_in_hostmode(pc)) { ++#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++ bcma_core_pci_hostmode_init(pc); ++#else ++ pr_err("Driver compiled without support for hostmode PCI\n"); ++#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ ++ } else { ++ bcma_core_pci_clientmode_init(pc); ++ } ++} ++ ++int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, ++ bool enable) ++{ ++ struct pci_dev *pdev = pc->core->bus->host_pci; ++ u32 coremask, tmp; ++ int err; ++ ++ err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); ++ if (err) ++ goto out; ++ ++ coremask = BIT(core->core_index) << 8; ++ if (enable) ++ tmp |= coremask; ++ else ++ tmp &= ~coremask; ++ ++ err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp); ++ ++out: ++ return err; ++} ++EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); +--- /dev/null ++++ b/drivers/bcma/host_pci.c +@@ -0,0 +1,251 @@ ++/* ++ * Broadcom specific AMBA ++ * PCI Host ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++#include <linux/slab.h> ++#include <linux/bcma/bcma.h> ++#include <linux/pci.h> ++ ++static void bcma_host_pci_switch_core(struct bcma_device *core) ++{ ++ pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN, ++ core->addr); ++ pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN2, ++ core->wrap); ++ core->bus->mapped_core = core; ++ pr_debug("Switched to core: 0x%X\n", core->id.id); ++} ++ ++static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset) ++{ ++ if (core->bus->mapped_core != core) ++ bcma_host_pci_switch_core(core); ++ return ioread8(core->bus->mmio + offset); ++} ++ ++static u16 bcma_host_pci_read16(struct bcma_device *core, u16 offset) ++{ ++ if (core->bus->mapped_core != core) ++ bcma_host_pci_switch_core(core); ++ return ioread16(core->bus->mmio + offset); ++} ++ ++static u32 bcma_host_pci_read32(struct bcma_device *core, u16 offset) ++{ ++ if (core->bus->mapped_core != core) ++ bcma_host_pci_switch_core(core); ++ return ioread32(core->bus->mmio + offset); ++} ++ ++static void bcma_host_pci_write8(struct bcma_device *core, u16 offset, ++ u8 value) ++{ ++ if (core->bus->mapped_core != core) ++ bcma_host_pci_switch_core(core); ++ iowrite8(value, core->bus->mmio + offset); ++} ++ ++static void bcma_host_pci_write16(struct bcma_device *core, u16 offset, ++ u16 value) ++{ ++ if (core->bus->mapped_core != core) ++ bcma_host_pci_switch_core(core); ++ iowrite16(value, core->bus->mmio + offset); ++} ++ ++static void bcma_host_pci_write32(struct bcma_device *core, u16 offset, ++ u32 value) ++{ ++ if (core->bus->mapped_core != core) ++ bcma_host_pci_switch_core(core); ++ iowrite32(value, core->bus->mmio + offset); ++} ++ ++#ifdef CONFIG_BCMA_BLOCKIO ++void bcma_host_pci_block_read(struct bcma_device *core, void *buffer, ++ size_t count, u16 offset, u8 reg_width) ++{ ++ void __iomem *addr = core->bus->mmio + offset; ++ if (core->bus->mapped_core != core) ++ bcma_host_pci_switch_core(core); ++ switch (reg_width) { ++ case sizeof(u8): ++ ioread8_rep(addr, buffer, count); ++ break; ++ case sizeof(u16): ++ WARN_ON(count & 1); ++ ioread16_rep(addr, buffer, count >> 1); ++ break; ++ case sizeof(u32): ++ WARN_ON(count & 3); ++ ioread32_rep(addr, buffer, count >> 2); ++ break; ++ default: ++ WARN_ON(1); ++ } ++} ++ ++void bcma_host_pci_block_write(struct bcma_device *core, const void *buffer, ++ size_t count, u16 offset, u8 reg_width) ++{ ++ void __iomem *addr = core->bus->mmio + offset; ++ if (core->bus->mapped_core != core) ++ bcma_host_pci_switch_core(core); ++ switch (reg_width) { ++ case sizeof(u8): ++ iowrite8_rep(addr, buffer, count); ++ break; ++ case sizeof(u16): ++ WARN_ON(count & 1); ++ iowrite16_rep(addr, buffer, count >> 1); ++ break; ++ case sizeof(u32): ++ WARN_ON(count & 3); ++ iowrite32_rep(addr, buffer, count >> 2); ++ break; ++ default: ++ WARN_ON(1); ++ } ++} ++#endif ++ ++static u32 bcma_host_pci_aread32(struct bcma_device *core, u16 offset) ++{ ++ if (core->bus->mapped_core != core) ++ bcma_host_pci_switch_core(core); ++ return ioread32(core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset); ++} ++ ++static void bcma_host_pci_awrite32(struct bcma_device *core, u16 offset, ++ u32 value) ++{ ++ if (core->bus->mapped_core != core) ++ bcma_host_pci_switch_core(core); ++ iowrite32(value, core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset); ++} ++ ++const struct bcma_host_ops bcma_host_pci_ops = { ++ .read8 = bcma_host_pci_read8, ++ .read16 = bcma_host_pci_read16, ++ .read32 = bcma_host_pci_read32, ++ .write8 = bcma_host_pci_write8, ++ .write16 = bcma_host_pci_write16, ++ .write32 = bcma_host_pci_write32, ++#ifdef CONFIG_BCMA_BLOCKIO ++ .block_read = bcma_host_pci_block_read, ++ .block_write = bcma_host_pci_block_write, ++#endif ++ .aread32 = bcma_host_pci_aread32, ++ .awrite32 = bcma_host_pci_awrite32, ++}; ++ ++static int bcma_host_pci_probe(struct pci_dev *dev, ++ const struct pci_device_id *id) ++{ ++ struct bcma_bus *bus; ++ int err = -ENOMEM; ++ const char *name; ++ u32 val; ++ ++ /* Alloc */ ++ bus = kzalloc(sizeof(*bus), GFP_KERNEL); ++ if (!bus) ++ goto out; ++ ++ /* Basic PCI configuration */ ++ err = pci_enable_device(dev); ++ if (err) ++ goto err_kfree_bus; ++ ++ name = dev_name(&dev->dev); ++ if (dev->driver && dev->driver->name) ++ name = dev->driver->name; ++ err = pci_request_regions(dev, name); ++ if (err) ++ goto err_pci_disable; ++ pci_set_master(dev); ++ ++ /* Disable the RETRY_TIMEOUT register (0x41) to keep ++ * PCI Tx retries from interfering with C3 CPU state */ ++ pci_read_config_dword(dev, 0x40, &val); ++ if ((val & 0x0000ff00) != 0) ++ pci_write_config_dword(dev, 0x40, val & 0xffff00ff); ++ ++ /* SSB needed additional powering up, do we have any AMBA PCI cards? */ ++ if (!dev->is_pcie) ++ pr_err("PCI card detected, report problems.\n"); ++ ++ /* Map MMIO */ ++ err = -ENOMEM; ++ bus->mmio = pci_iomap(dev, 0, ~0UL); ++ if (!bus->mmio) ++ goto err_pci_release_regions; ++ ++ /* Host specific */ ++ bus->host_pci = dev; ++ bus->hosttype = BCMA_HOSTTYPE_PCI; ++ bus->ops = &bcma_host_pci_ops; ++ ++ /* Register */ ++ err = bcma_bus_register(bus); ++ if (err) ++ goto err_pci_unmap_mmio; ++ ++ pci_set_drvdata(dev, bus); ++ ++out: ++ return err; ++ ++err_pci_unmap_mmio: ++ pci_iounmap(dev, bus->mmio); ++err_pci_release_regions: ++ pci_release_regions(dev); ++err_pci_disable: ++ pci_disable_device(dev); ++err_kfree_bus: ++ kfree(bus); ++ return err; ++} ++ ++static void bcma_host_pci_remove(struct pci_dev *dev) ++{ ++ struct bcma_bus *bus = pci_get_drvdata(dev); ++ ++ bcma_bus_unregister(bus); ++ pci_iounmap(dev, bus->mmio); ++ pci_release_regions(dev); ++ pci_disable_device(dev); ++ kfree(bus); ++ pci_set_drvdata(dev, NULL); ++} ++ ++static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { ++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) }, ++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) }, ++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) }, ++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) }, ++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) }, ++ { 0, }, ++}; ++MODULE_DEVICE_TABLE(pci, bcma_pci_bridge_tbl); ++ ++static struct pci_driver bcma_pci_bridge_driver = { ++ .name = "bcma-pci-bridge", ++ .id_table = bcma_pci_bridge_tbl, ++ .probe = bcma_host_pci_probe, ++ .remove = bcma_host_pci_remove, ++}; ++ ++int __init bcma_host_pci_init(void) ++{ ++ return pci_register_driver(&bcma_pci_bridge_driver); ++} ++ ++void __exit bcma_host_pci_exit(void) ++{ ++ pci_unregister_driver(&bcma_pci_bridge_driver); ++} +--- /dev/null ++++ b/drivers/bcma/main.c +@@ -0,0 +1,257 @@ ++/* ++ * Broadcom specific AMBA ++ * Bus subsystem ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++#include <linux/bcma/bcma.h> ++#include <linux/slab.h> ++ ++MODULE_DESCRIPTION("Broadcom's specific AMBA driver"); ++MODULE_LICENSE("GPL"); ++ ++static int bcma_bus_match(struct device *dev, struct device_driver *drv); ++static int bcma_device_probe(struct device *dev); ++static int bcma_device_remove(struct device *dev); ++ ++static ssize_t manuf_show(struct device *dev, struct device_attribute *attr, char *buf) ++{ ++ struct bcma_device *core = container_of(dev, struct bcma_device, dev); ++ return sprintf(buf, "0x%03X\n", core->id.manuf); ++} ++static ssize_t id_show(struct device *dev, struct device_attribute *attr, char *buf) ++{ ++ struct bcma_device *core = container_of(dev, struct bcma_device, dev); ++ return sprintf(buf, "0x%03X\n", core->id.id); ++} ++static ssize_t rev_show(struct device *dev, struct device_attribute *attr, char *buf) ++{ ++ struct bcma_device *core = container_of(dev, struct bcma_device, dev); ++ return sprintf(buf, "0x%02X\n", core->id.rev); ++} ++static ssize_t class_show(struct device *dev, struct device_attribute *attr, char *buf) ++{ ++ struct bcma_device *core = container_of(dev, struct bcma_device, dev); ++ return sprintf(buf, "0x%X\n", core->id.class); ++} ++static struct device_attribute bcma_device_attrs[] = { ++ __ATTR_RO(manuf), ++ __ATTR_RO(id), ++ __ATTR_RO(rev), ++ __ATTR_RO(class), ++ __ATTR_NULL, ++}; ++ ++static struct bus_type bcma_bus_type = { ++ .name = "bcma", ++ .match = bcma_bus_match, ++ .probe = bcma_device_probe, ++ .remove = bcma_device_remove, ++ .dev_attrs = bcma_device_attrs, ++}; ++ ++static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry(core, &bus->cores, list) { ++ if (core->id.id == coreid) ++ return core; ++ } ++ return NULL; ++} ++ ++static void bcma_release_core_dev(struct device *dev) ++{ ++ struct bcma_device *core = container_of(dev, struct bcma_device, dev); ++ kfree(core); ++} ++ ++static int bcma_register_cores(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ int err, dev_id = 0; ++ ++ list_for_each_entry(core, &bus->cores, list) { ++ /* We support that cores ourself */ ++ switch (core->id.id) { ++ case BCMA_CORE_CHIPCOMMON: ++ case BCMA_CORE_PCI: ++ case BCMA_CORE_PCIE: ++ continue; ++ } ++ ++ core->dev.release = bcma_release_core_dev; ++ core->dev.bus = &bcma_bus_type; ++ dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id); ++ ++ switch (bus->hosttype) { ++ case BCMA_HOSTTYPE_PCI: ++ core->dev.parent = &bus->host_pci->dev; ++ core->dma_dev = &bus->host_pci->dev; ++ core->irq = bus->host_pci->irq; ++ break; ++ case BCMA_HOSTTYPE_NONE: ++ case BCMA_HOSTTYPE_SDIO: ++ break; ++ } ++ ++ err = device_register(&core->dev); ++ if (err) { ++ pr_err("Could not register dev for core 0x%03X\n", ++ core->id.id); ++ continue; ++ } ++ core->dev_registered = true; ++ dev_id++; ++ } ++ ++ return 0; ++} ++ ++static void bcma_unregister_cores(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry(core, &bus->cores, list) { ++ if (core->dev_registered) ++ device_unregister(&core->dev); ++ } ++} ++ ++int bcma_bus_register(struct bcma_bus *bus) ++{ ++ int err; ++ struct bcma_device *core; ++ ++ /* Scan for devices (cores) */ ++ err = bcma_bus_scan(bus); ++ if (err) { ++ pr_err("Failed to scan: %d\n", err); ++ return -1; ++ } ++ ++ /* Init CC core */ ++ core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON); ++ if (core) { ++ bus->drv_cc.core = core; ++ bcma_core_chipcommon_init(&bus->drv_cc); ++ } ++ ++ /* Init PCIE core */ ++ core = bcma_find_core(bus, BCMA_CORE_PCIE); ++ if (core) { ++ bus->drv_pci.core = core; ++ bcma_core_pci_init(&bus->drv_pci); ++ } ++ ++ /* Try to get SPROM */ ++ err = bcma_sprom_get(bus); ++ if (err == -ENOENT) { ++ pr_err("No SPROM available\n"); ++ } else if (err) { ++ pr_err("Failed to get SPROM: %d\n", err); ++ return -ENOENT; ++ } ++ ++ /* Register found cores */ ++ bcma_register_cores(bus); ++ ++ pr_info("Bus registered\n"); ++ ++ return 0; ++} ++ ++void bcma_bus_unregister(struct bcma_bus *bus) ++{ ++ bcma_unregister_cores(bus); ++} ++ ++int __bcma_driver_register(struct bcma_driver *drv, struct module *owner) ++{ ++ drv->drv.name = drv->name; ++ drv->drv.bus = &bcma_bus_type; ++ drv->drv.owner = owner; ++ ++ return driver_register(&drv->drv); ++} ++EXPORT_SYMBOL_GPL(__bcma_driver_register); ++ ++void bcma_driver_unregister(struct bcma_driver *drv) ++{ ++ driver_unregister(&drv->drv); ++} ++EXPORT_SYMBOL_GPL(bcma_driver_unregister); ++ ++static int bcma_bus_match(struct device *dev, struct device_driver *drv) ++{ ++ struct bcma_device *core = container_of(dev, struct bcma_device, dev); ++ struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv); ++ const struct bcma_device_id *cid = &core->id; ++ const struct bcma_device_id *did; ++ ++ for (did = adrv->id_table; did->manuf || did->id || did->rev; did++) { ++ if ((did->manuf == cid->manuf || did->manuf == BCMA_ANY_MANUF) && ++ (did->id == cid->id || did->id == BCMA_ANY_ID) && ++ (did->rev == cid->rev || did->rev == BCMA_ANY_REV) && ++ (did->class == cid->class || did->class == BCMA_ANY_CLASS)) ++ return 1; ++ } ++ return 0; ++} ++ ++static int bcma_device_probe(struct device *dev) ++{ ++ struct bcma_device *core = container_of(dev, struct bcma_device, dev); ++ struct bcma_driver *adrv = container_of(dev->driver, struct bcma_driver, ++ drv); ++ int err = 0; ++ ++ if (adrv->probe) ++ err = adrv->probe(core); ++ ++ return err; ++} ++ ++static int bcma_device_remove(struct device *dev) ++{ ++ struct bcma_device *core = container_of(dev, struct bcma_device, dev); ++ struct bcma_driver *adrv = container_of(dev->driver, struct bcma_driver, ++ drv); ++ ++ if (adrv->remove) ++ adrv->remove(core); ++ ++ return 0; ++} ++ ++static int __init bcma_modinit(void) ++{ ++ int err; ++ ++ err = bus_register(&bcma_bus_type); ++ if (err) ++ return err; ++ ++#ifdef CONFIG_BCMA_HOST_PCI ++ err = bcma_host_pci_init(); ++ if (err) { ++ pr_err("PCI host initialization failed\n"); ++ err = 0; ++ } ++#endif ++ ++ return err; ++} ++fs_initcall(bcma_modinit); ++ ++static void __exit bcma_modexit(void) ++{ ++#ifdef CONFIG_BCMA_HOST_PCI ++ bcma_host_pci_exit(); ++#endif ++ bus_unregister(&bcma_bus_type); ++} ++module_exit(bcma_modexit) +--- /dev/null ++++ b/drivers/bcma/scan.c +@@ -0,0 +1,360 @@ ++/* ++ * Broadcom specific AMBA ++ * Bus scanning ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "scan.h" ++#include "bcma_private.h" ++ ++#include <linux/bcma/bcma.h> ++#include <linux/bcma/bcma_regs.h> ++#include <linux/pci.h> ++#include <linux/io.h> ++#include <linux/dma-mapping.h> ++#include <linux/slab.h> ++ ++struct bcma_device_id_name { ++ u16 id; ++ const char *name; ++}; ++struct bcma_device_id_name bcma_device_names[] = { ++ { BCMA_CORE_OOB_ROUTER, "OOB Router" }, ++ { BCMA_CORE_INVALID, "Invalid" }, ++ { BCMA_CORE_CHIPCOMMON, "ChipCommon" }, ++ { BCMA_CORE_ILINE20, "ILine 20" }, ++ { BCMA_CORE_SRAM, "SRAM" }, ++ { BCMA_CORE_SDRAM, "SDRAM" }, ++ { BCMA_CORE_PCI, "PCI" }, ++ { BCMA_CORE_MIPS, "MIPS" }, ++ { BCMA_CORE_ETHERNET, "Fast Ethernet" }, ++ { BCMA_CORE_V90, "V90" }, ++ { BCMA_CORE_USB11_HOSTDEV, "USB 1.1 Hostdev" }, ++ { BCMA_CORE_ADSL, "ADSL" }, ++ { BCMA_CORE_ILINE100, "ILine 100" }, ++ { BCMA_CORE_IPSEC, "IPSEC" }, ++ { BCMA_CORE_UTOPIA, "UTOPIA" }, ++ { BCMA_CORE_PCMCIA, "PCMCIA" }, ++ { BCMA_CORE_INTERNAL_MEM, "Internal Memory" }, ++ { BCMA_CORE_MEMC_SDRAM, "MEMC SDRAM" }, ++ { BCMA_CORE_OFDM, "OFDM" }, ++ { BCMA_CORE_EXTIF, "EXTIF" }, ++ { BCMA_CORE_80211, "IEEE 802.11" }, ++ { BCMA_CORE_PHY_A, "PHY A" }, ++ { BCMA_CORE_PHY_B, "PHY B" }, ++ { BCMA_CORE_PHY_G, "PHY G" }, ++ { BCMA_CORE_MIPS_3302, "MIPS 3302" }, ++ { BCMA_CORE_USB11_HOST, "USB 1.1 Host" }, ++ { BCMA_CORE_USB11_DEV, "USB 1.1 Device" }, ++ { BCMA_CORE_USB20_HOST, "USB 2.0 Host" }, ++ { BCMA_CORE_USB20_DEV, "USB 2.0 Device" }, ++ { BCMA_CORE_SDIO_HOST, "SDIO Host" }, ++ { BCMA_CORE_ROBOSWITCH, "Roboswitch" }, ++ { BCMA_CORE_PARA_ATA, "PATA" }, ++ { BCMA_CORE_SATA_XORDMA, "SATA XOR-DMA" }, ++ { BCMA_CORE_ETHERNET_GBIT, "GBit Ethernet" }, ++ { BCMA_CORE_PCIE, "PCIe" }, ++ { BCMA_CORE_PHY_N, "PHY N" }, ++ { BCMA_CORE_SRAM_CTL, "SRAM Controller" }, ++ { BCMA_CORE_MINI_MACPHY, "Mini MACPHY" }, ++ { BCMA_CORE_ARM_1176, "ARM 1176" }, ++ { BCMA_CORE_ARM_7TDMI, "ARM 7TDMI" }, ++ { BCMA_CORE_PHY_LP, "PHY LP" }, ++ { BCMA_CORE_PMU, "PMU" }, ++ { BCMA_CORE_PHY_SSN, "PHY SSN" }, ++ { BCMA_CORE_SDIO_DEV, "SDIO Device" }, ++ { BCMA_CORE_ARM_CM3, "ARM CM3" }, ++ { BCMA_CORE_PHY_HT, "PHY HT" }, ++ { BCMA_CORE_MIPS_74K, "MIPS 74K" }, ++ { BCMA_CORE_MAC_GBIT, "GBit MAC" }, ++ { BCMA_CORE_DDR12_MEM_CTL, "DDR1/DDR2 Memory Controller" }, ++ { BCMA_CORE_PCIE_RC, "PCIe Root Complex" }, ++ { BCMA_CORE_OCP_OCP_BRIDGE, "OCP to OCP Bridge" }, ++ { BCMA_CORE_SHARED_COMMON, "Common Shared" }, ++ { BCMA_CORE_OCP_AHB_BRIDGE, "OCP to AHB Bridge" }, ++ { BCMA_CORE_SPI_HOST, "SPI Host" }, ++ { BCMA_CORE_I2S, "I2S" }, ++ { BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" }, ++ { BCMA_CORE_SHIM, "SHIM" }, ++ { BCMA_CORE_DEFAULT, "Default" }, ++}; ++const char *bcma_device_name(struct bcma_device_id *id) ++{ ++ int i; ++ ++ if (id->manuf == BCMA_MANUF_BCM) { ++ for (i = 0; i < ARRAY_SIZE(bcma_device_names); i++) { ++ if (bcma_device_names[i].id == id->id) ++ return bcma_device_names[i].name; ++ } ++ } ++ return "UNKNOWN"; ++} ++ ++static u32 bcma_scan_read32(struct bcma_bus *bus, u8 current_coreidx, ++ u16 offset) ++{ ++ return readl(bus->mmio + offset); ++} ++ ++static void bcma_scan_switch_core(struct bcma_bus *bus, u32 addr) ++{ ++ if (bus->hosttype == BCMA_HOSTTYPE_PCI) ++ pci_write_config_dword(bus->host_pci, BCMA_PCI_BAR0_WIN, ++ addr); ++} ++ ++static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 **eromptr) ++{ ++ u32 ent = readl(*eromptr); ++ (*eromptr)++; ++ return ent; ++} ++ ++static void bcma_erom_push_ent(u32 **eromptr) ++{ ++ (*eromptr)--; ++} ++ ++static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 **eromptr) ++{ ++ u32 ent = bcma_erom_get_ent(bus, eromptr); ++ if (!(ent & SCAN_ER_VALID)) ++ return -ENOENT; ++ if ((ent & SCAN_ER_TAG) != SCAN_ER_TAG_CI) ++ return -ENOENT; ++ return ent; ++} ++ ++static bool bcma_erom_is_end(struct bcma_bus *bus, u32 **eromptr) ++{ ++ u32 ent = bcma_erom_get_ent(bus, eromptr); ++ bcma_erom_push_ent(eromptr); ++ return (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID)); ++} ++ ++static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 **eromptr) ++{ ++ u32 ent = bcma_erom_get_ent(bus, eromptr); ++ bcma_erom_push_ent(eromptr); ++ return (((ent & SCAN_ER_VALID)) && ++ ((ent & SCAN_ER_TAGX) == SCAN_ER_TAG_ADDR) && ++ ((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE)); ++} ++ ++static void bcma_erom_skip_component(struct bcma_bus *bus, u32 **eromptr) ++{ ++ u32 ent; ++ while (1) { ++ ent = bcma_erom_get_ent(bus, eromptr); ++ if ((ent & SCAN_ER_VALID) && ++ ((ent & SCAN_ER_TAG) == SCAN_ER_TAG_CI)) ++ break; ++ if (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID)) ++ break; ++ } ++ bcma_erom_push_ent(eromptr); ++} ++ ++static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 **eromptr) ++{ ++ u32 ent = bcma_erom_get_ent(bus, eromptr); ++ if (!(ent & SCAN_ER_VALID)) ++ return -ENOENT; ++ if ((ent & SCAN_ER_TAG) != SCAN_ER_TAG_MP) ++ return -ENOENT; ++ return ent; ++} ++ ++static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr, ++ u32 type, u8 port) ++{ ++ u32 addrl, addrh, sizel, sizeh = 0; ++ u32 size; ++ ++ u32 ent = bcma_erom_get_ent(bus, eromptr); ++ if ((!(ent & SCAN_ER_VALID)) || ++ ((ent & SCAN_ER_TAGX) != SCAN_ER_TAG_ADDR) || ++ ((ent & SCAN_ADDR_TYPE) != type) || ++ (((ent & SCAN_ADDR_PORT) >> SCAN_ADDR_PORT_SHIFT) != port)) { ++ bcma_erom_push_ent(eromptr); ++ return -EINVAL; ++ } ++ ++ addrl = ent & SCAN_ADDR_ADDR; ++ if (ent & SCAN_ADDR_AG32) ++ addrh = bcma_erom_get_ent(bus, eromptr); ++ else ++ addrh = 0; ++ ++ if ((ent & SCAN_ADDR_SZ) == SCAN_ADDR_SZ_SZD) { ++ size = bcma_erom_get_ent(bus, eromptr); ++ sizel = size & SCAN_SIZE_SZ; ++ if (size & SCAN_SIZE_SG32) ++ sizeh = bcma_erom_get_ent(bus, eromptr); ++ } else ++ sizel = SCAN_ADDR_SZ_BASE << ++ ((ent & SCAN_ADDR_SZ) >> SCAN_ADDR_SZ_SHIFT); ++ ++ return addrl; ++} ++ ++int bcma_bus_scan(struct bcma_bus *bus) ++{ ++ u32 erombase; ++ u32 __iomem *eromptr, *eromend; ++ ++ s32 cia, cib; ++ u8 ports[2], wrappers[2]; ++ ++ s32 tmp; ++ u8 i, j; ++ ++ int err; ++ ++ INIT_LIST_HEAD(&bus->cores); ++ bus->nr_cores = 0; ++ ++ bcma_scan_switch_core(bus, BCMA_ADDR_BASE); ++ ++ tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID); ++ bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; ++ bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; ++ bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ ++ erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM); ++ eromptr = bus->mmio; ++ eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); ++ ++ bcma_scan_switch_core(bus, erombase); ++ ++ while (eromptr < eromend) { ++ struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL); ++ if (!core) ++ return -ENOMEM; ++ INIT_LIST_HEAD(&core->list); ++ core->bus = bus; ++ ++ /* get CIs */ ++ cia = bcma_erom_get_ci(bus, &eromptr); ++ if (cia < 0) { ++ bcma_erom_push_ent(&eromptr); ++ if (bcma_erom_is_end(bus, &eromptr)) ++ break; ++ err= -EILSEQ; ++ goto out; ++ } ++ cib = bcma_erom_get_ci(bus, &eromptr); ++ if (cib < 0) { ++ err= -EILSEQ; ++ goto out; ++ } ++ ++ /* parse CIs */ ++ core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT; ++ core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT; ++ core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT; ++ ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT; ++ ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT; ++ wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT; ++ wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT; ++ core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT; ++ ++ if (((core->id.manuf == BCMA_MANUF_ARM) && ++ (core->id.id == 0xFFF)) || ++ (ports[1] == 0)) { ++ bcma_erom_skip_component(bus, &eromptr); ++ continue; ++ } ++ ++ /* check if component is a core at all */ ++ if (wrappers[0] + wrappers[1] == 0) { ++ /* we could save addrl of the router ++ if (cid == BCMA_CORE_OOB_ROUTER) ++ */ ++ bcma_erom_skip_component(bus, &eromptr); ++ continue; ++ } ++ ++ if (bcma_erom_is_bridge(bus, &eromptr)) { ++ bcma_erom_skip_component(bus, &eromptr); ++ continue; ++ } ++ ++ /* get & parse master ports */ ++ for (i = 0; i < ports[0]; i++) { ++ u32 mst_port_d = bcma_erom_get_mst_port(bus, &eromptr); ++ if (mst_port_d < 0) { ++ err= -EILSEQ; ++ goto out; ++ } ++ } ++ ++ /* get & parse slave ports */ ++ for (i = 0; i < ports[1]; i++) { ++ for (j = 0; ; j++) { ++ tmp = bcma_erom_get_addr_desc(bus, &eromptr, ++ SCAN_ADDR_TYPE_SLAVE, i); ++ if (tmp < 0) { ++ /* no more entries for port _i_ */ ++ /* pr_debug("erom: slave port %d " ++ * "has %d descriptors\n", i, j); */ ++ break; ++ } else { ++ if (i == 0 && j == 0) ++ core->addr = tmp; ++ } ++ } ++ } ++ ++ /* get & parse master wrappers */ ++ for (i = 0; i < wrappers[0]; i++) { ++ for (j = 0; ; j++) { ++ tmp = bcma_erom_get_addr_desc(bus, &eromptr, ++ SCAN_ADDR_TYPE_MWRAP, i); ++ if (tmp < 0) { ++ /* no more entries for port _i_ */ ++ /* pr_debug("erom: master wrapper %d " ++ * "has %d descriptors\n", i, j); */ ++ break; ++ } else { ++ if (i == 0 && j == 0) ++ core->wrap = tmp; ++ } ++ } ++ } ++ ++ /* get & parse slave wrappers */ ++ for (i = 0; i < wrappers[1]; i++) { ++ u8 hack = (ports[1] == 1) ? 0 : 1; ++ for (j = 0; ; j++) { ++ tmp = bcma_erom_get_addr_desc(bus, &eromptr, ++ SCAN_ADDR_TYPE_SWRAP, i + hack); ++ if (tmp < 0) { ++ /* no more entries for port _i_ */ ++ /* pr_debug("erom: master wrapper %d " ++ * has %d descriptors\n", i, j); */ ++ break; ++ } else { ++ if (wrappers[0] == 0 && !i && !j) ++ core->wrap = tmp; ++ } ++ } ++ } ++ ++ pr_info("Core %d found: %s " ++ "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", ++ bus->nr_cores, bcma_device_name(&core->id), ++ core->id.manuf, core->id.id, core->id.rev, ++ core->id.class); ++ ++ core->core_index = bus->nr_cores++; ++ list_add(&core->list, &bus->cores); ++ continue; ++out: ++ return err; ++ } ++ ++ return 0; ++} +--- /dev/null ++++ b/drivers/bcma/scan.h +@@ -0,0 +1,56 @@ ++#ifndef BCMA_SCAN_H_ ++#define BCMA_SCAN_H_ ++ ++#define BCMA_ADDR_BASE 0x18000000 ++#define BCMA_WRAP_BASE 0x18100000 ++ ++#define SCAN_ER_VALID 0x00000001 ++#define SCAN_ER_TAGX 0x00000006 /* we have to ignore 0x8 bit when checking tag for SCAN_ER_TAG_ADDR */ ++#define SCAN_ER_TAG 0x0000000E ++#define SCAN_ER_TAG_CI 0x00000000 ++#define SCAN_ER_TAG_MP 0x00000002 ++#define SCAN_ER_TAG_ADDR 0x00000004 ++#define SCAN_ER_TAG_END 0x0000000E ++#define SCAN_ER_BAD 0xFFFFFFFF ++ ++#define SCAN_CIA_CLASS 0x000000F0 ++#define SCAN_CIA_CLASS_SHIFT 4 ++#define SCAN_CIA_ID 0x000FFF00 ++#define SCAN_CIA_ID_SHIFT 8 ++#define SCAN_CIA_MANUF 0xFFF00000 ++#define SCAN_CIA_MANUF_SHIFT 20 ++ ++#define SCAN_CIB_NMP 0x000001F0 ++#define SCAN_CIB_NMP_SHIFT 4 ++#define SCAN_CIB_NSP 0x00003E00 ++#define SCAN_CIB_NSP_SHIFT 9 ++#define SCAN_CIB_NMW 0x0007C000 ++#define SCAN_CIB_NMW_SHIFT 14 ++#define SCAN_CIB_NSW 0x00F80000 ++#define SCAN_CIB_NSW_SHIFT 17 ++#define SCAN_CIB_REV 0xFF000000 ++#define SCAN_CIB_REV_SHIFT 24 ++ ++#define SCAN_ADDR_AG32 0x00000008 ++#define SCAN_ADDR_SZ 0x00000030 ++#define SCAN_ADDR_SZ_SHIFT 4 ++#define SCAN_ADDR_SZ_4K 0x00000000 ++#define SCAN_ADDR_SZ_8K 0x00000010 ++#define SCAN_ADDR_SZ_16K 0x00000020 ++#define SCAN_ADDR_SZ_SZD 0x00000030 ++#define SCAN_ADDR_TYPE 0x000000C0 ++#define SCAN_ADDR_TYPE_SLAVE 0x00000000 ++#define SCAN_ADDR_TYPE_BRIDGE 0x00000040 ++#define SCAN_ADDR_TYPE_SWRAP 0x00000080 ++#define SCAN_ADDR_TYPE_MWRAP 0x000000C0 ++#define SCAN_ADDR_PORT 0x00000F00 ++#define SCAN_ADDR_PORT_SHIFT 8 ++#define SCAN_ADDR_ADDR 0xFFFFF000 ++ ++#define SCAN_ADDR_SZ_BASE 0x00001000 /* 4KB */ ++ ++#define SCAN_SIZE_SZ_ALIGN 0x00000FFF ++#define SCAN_SIZE_SZ 0xFFFFF000 ++#define SCAN_SIZE_SG32 0x00000008 ++ ++#endif /* BCMA_SCAN_H_ */ +--- /dev/null ++++ b/include/linux/bcma/bcma.h +@@ -0,0 +1,271 @@ ++#ifndef LINUX_BCMA_H_ ++#define LINUX_BCMA_H_ ++ ++#include <linux/pci.h> ++#include <linux/mod_devicetable.h> ++ ++#include <linux/bcma/bcma_driver_chipcommon.h> ++#include <linux/bcma/bcma_driver_pci.h> ++#include <linux/ssb/ssb.h> /* SPROM sharing */ ++ ++#include "bcma_regs.h" ++ ++struct bcma_device; ++struct bcma_bus; ++ ++enum bcma_hosttype { ++ BCMA_HOSTTYPE_NONE, ++ BCMA_HOSTTYPE_PCI, ++ BCMA_HOSTTYPE_SDIO, ++}; ++ ++struct bcma_chipinfo { ++ u16 id; ++ u8 rev; ++ u8 pkg; ++}; ++ ++enum bcma_clkmode { ++ BCMA_CLKMODE_FAST, ++ BCMA_CLKMODE_DYNAMIC, ++}; ++ ++struct bcma_host_ops { ++ u8 (*read8)(struct bcma_device *core, u16 offset); ++ u16 (*read16)(struct bcma_device *core, u16 offset); ++ u32 (*read32)(struct bcma_device *core, u16 offset); ++ void (*write8)(struct bcma_device *core, u16 offset, u8 value); ++ void (*write16)(struct bcma_device *core, u16 offset, u16 value); ++ void (*write32)(struct bcma_device *core, u16 offset, u32 value); ++#ifdef CONFIG_BCMA_BLOCKIO ++ void (*block_read)(struct bcma_device *core, void *buffer, ++ size_t count, u16 offset, u8 reg_width); ++ void (*block_write)(struct bcma_device *core, const void *buffer, ++ size_t count, u16 offset, u8 reg_width); ++#endif ++ /* Agent ops */ ++ u32 (*aread32)(struct bcma_device *core, u16 offset); ++ void (*awrite32)(struct bcma_device *core, u16 offset, u32 value); ++}; ++ ++/* Core manufacturers */ ++#define BCMA_MANUF_ARM 0x43B ++#define BCMA_MANUF_MIPS 0x4A7 ++#define BCMA_MANUF_BCM 0x4BF ++ ++/* Core class values. */ ++#define BCMA_CL_SIM 0x0 ++#define BCMA_CL_EROM 0x1 ++#define BCMA_CL_CORESIGHT 0x9 ++#define BCMA_CL_VERIF 0xB ++#define BCMA_CL_OPTIMO 0xD ++#define BCMA_CL_GEN 0xE ++#define BCMA_CL_PRIMECELL 0xF ++ ++/* Core-ID values. */ ++#define BCMA_CORE_OOB_ROUTER 0x367 /* Out of band */ ++#define BCMA_CORE_INVALID 0x700 ++#define BCMA_CORE_CHIPCOMMON 0x800 ++#define BCMA_CORE_ILINE20 0x801 ++#define BCMA_CORE_SRAM 0x802 ++#define BCMA_CORE_SDRAM 0x803 ++#define BCMA_CORE_PCI 0x804 ++#define BCMA_CORE_MIPS 0x805 ++#define BCMA_CORE_ETHERNET 0x806 ++#define BCMA_CORE_V90 0x807 ++#define BCMA_CORE_USB11_HOSTDEV 0x808 ++#define BCMA_CORE_ADSL 0x809 ++#define BCMA_CORE_ILINE100 0x80A ++#define BCMA_CORE_IPSEC 0x80B ++#define BCMA_CORE_UTOPIA 0x80C ++#define BCMA_CORE_PCMCIA 0x80D ++#define BCMA_CORE_INTERNAL_MEM 0x80E ++#define BCMA_CORE_MEMC_SDRAM 0x80F ++#define BCMA_CORE_OFDM 0x810 ++#define BCMA_CORE_EXTIF 0x811 ++#define BCMA_CORE_80211 0x812 ++#define BCMA_CORE_PHY_A 0x813 ++#define BCMA_CORE_PHY_B 0x814 ++#define BCMA_CORE_PHY_G 0x815 ++#define BCMA_CORE_MIPS_3302 0x816 ++#define BCMA_CORE_USB11_HOST 0x817 ++#define BCMA_CORE_USB11_DEV 0x818 ++#define BCMA_CORE_USB20_HOST 0x819 ++#define BCMA_CORE_USB20_DEV 0x81A ++#define BCMA_CORE_SDIO_HOST 0x81B ++#define BCMA_CORE_ROBOSWITCH 0x81C ++#define BCMA_CORE_PARA_ATA 0x81D ++#define BCMA_CORE_SATA_XORDMA 0x81E ++#define BCMA_CORE_ETHERNET_GBIT 0x81F ++#define BCMA_CORE_PCIE 0x820 ++#define BCMA_CORE_PHY_N 0x821 ++#define BCMA_CORE_SRAM_CTL 0x822 ++#define BCMA_CORE_MINI_MACPHY 0x823 ++#define BCMA_CORE_ARM_1176 0x824 ++#define BCMA_CORE_ARM_7TDMI 0x825 ++#define BCMA_CORE_PHY_LP 0x826 ++#define BCMA_CORE_PMU 0x827 ++#define BCMA_CORE_PHY_SSN 0x828 ++#define BCMA_CORE_SDIO_DEV 0x829 ++#define BCMA_CORE_ARM_CM3 0x82A ++#define BCMA_CORE_PHY_HT 0x82B ++#define BCMA_CORE_MIPS_74K 0x82C ++#define BCMA_CORE_MAC_GBIT 0x82D ++#define BCMA_CORE_DDR12_MEM_CTL 0x82E ++#define BCMA_CORE_PCIE_RC 0x82F /* PCIe Root Complex */ ++#define BCMA_CORE_OCP_OCP_BRIDGE 0x830 ++#define BCMA_CORE_SHARED_COMMON 0x831 ++#define BCMA_CORE_OCP_AHB_BRIDGE 0x832 ++#define BCMA_CORE_SPI_HOST 0x833 ++#define BCMA_CORE_I2S 0x834 ++#define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */ ++#define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */ ++#define BCMA_CORE_DEFAULT 0xFFF ++ ++#define BCMA_MAX_NR_CORES 16 ++ ++struct bcma_device { ++ struct bcma_bus *bus; ++ struct bcma_device_id id; ++ ++ struct device dev; ++ struct device *dma_dev; ++ unsigned int irq; ++ bool dev_registered; ++ ++ u8 core_index; ++ ++ u32 addr; ++ u32 wrap; ++ ++ void *drvdata; ++ struct list_head list; ++}; ++ ++static inline void *bcma_get_drvdata(struct bcma_device *core) ++{ ++ return core->drvdata; ++} ++static inline void bcma_set_drvdata(struct bcma_device *core, void *drvdata) ++{ ++ core->drvdata = drvdata; ++} ++ ++struct bcma_driver { ++ const char *name; ++ const struct bcma_device_id *id_table; ++ ++ int (*probe)(struct bcma_device *dev); ++ void (*remove)(struct bcma_device *dev); ++ int (*suspend)(struct bcma_device *dev, pm_message_t state); ++ int (*resume)(struct bcma_device *dev); ++ void (*shutdown)(struct bcma_device *dev); ++ ++ struct device_driver drv; ++}; ++extern ++int __bcma_driver_register(struct bcma_driver *drv, struct module *owner); ++static inline int bcma_driver_register(struct bcma_driver *drv) ++{ ++ return __bcma_driver_register(drv, THIS_MODULE); ++} ++extern void bcma_driver_unregister(struct bcma_driver *drv); ++ ++struct bcma_bus { ++ /* The MMIO area. */ ++ void __iomem *mmio; ++ ++ const struct bcma_host_ops *ops; ++ ++ enum bcma_hosttype hosttype; ++ union { ++ /* Pointer to the PCI bus (only for BCMA_HOSTTYPE_PCI) */ ++ struct pci_dev *host_pci; ++ /* Pointer to the SDIO device (only for BCMA_HOSTTYPE_SDIO) */ ++ struct sdio_func *host_sdio; ++ }; ++ ++ struct bcma_chipinfo chipinfo; ++ ++ struct bcma_device *mapped_core; ++ struct list_head cores; ++ u8 nr_cores; ++ ++ struct bcma_drv_cc drv_cc; ++ struct bcma_drv_pci drv_pci; ++ ++ /* We decided to share SPROM struct with SSB as long as we do not need ++ * any hacks for BCMA. This simplifies drivers code. */ ++ struct ssb_sprom sprom; ++}; ++ ++extern inline u32 bcma_read8(struct bcma_device *core, u16 offset) ++{ ++ return core->bus->ops->read8(core, offset); ++} ++extern inline u32 bcma_read16(struct bcma_device *core, u16 offset) ++{ ++ return core->bus->ops->read16(core, offset); ++} ++extern inline u32 bcma_read32(struct bcma_device *core, u16 offset) ++{ ++ return core->bus->ops->read32(core, offset); ++} ++extern inline ++void bcma_write8(struct bcma_device *core, u16 offset, u32 value) ++{ ++ core->bus->ops->write8(core, offset, value); ++} ++extern inline ++void bcma_write16(struct bcma_device *core, u16 offset, u32 value) ++{ ++ core->bus->ops->write16(core, offset, value); ++} ++extern inline ++void bcma_write32(struct bcma_device *core, u16 offset, u32 value) ++{ ++ core->bus->ops->write32(core, offset, value); ++} ++#ifdef CONFIG_BCMA_BLOCKIO ++extern inline void bcma_block_read(struct bcma_device *core, void *buffer, ++ size_t count, u16 offset, u8 reg_width) ++{ ++ core->bus->ops->block_read(core, buffer, count, offset, reg_width); ++} ++extern inline void bcma_block_write(struct bcma_device *core, const void *buffer, ++ size_t count, u16 offset, u8 reg_width) ++{ ++ core->bus->ops->block_write(core, buffer, count, offset, reg_width); ++} ++#endif ++extern inline u32 bcma_aread32(struct bcma_device *core, u16 offset) ++{ ++ return core->bus->ops->aread32(core, offset); ++} ++extern inline ++void bcma_awrite32(struct bcma_device *core, u16 offset, u32 value) ++{ ++ core->bus->ops->awrite32(core, offset, value); ++} ++ ++#define bcma_mask32(cc, offset, mask) \ ++ bcma_write32(cc, offset, bcma_read32(cc, offset) & (mask)) ++#define bcma_set32(cc, offset, set) \ ++ bcma_write32(cc, offset, bcma_read32(cc, offset) | (set)) ++#define bcma_maskset32(cc, offset, mask, set) \ ++ bcma_write32(cc, offset, (bcma_read32(cc, offset) & (mask)) | (set)) ++ ++extern bool bcma_core_is_enabled(struct bcma_device *core); ++extern void bcma_core_disable(struct bcma_device *core, u32 flags); ++extern int bcma_core_enable(struct bcma_device *core, u32 flags); ++extern void bcma_core_set_clockmode(struct bcma_device *core, ++ enum bcma_clkmode clkmode); ++extern void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status, ++ bool on); ++#define BCMA_DMA_TRANSLATION_MASK 0xC0000000 ++#define BCMA_DMA_TRANSLATION_NONE 0x00000000 ++#define BCMA_DMA_TRANSLATION_DMA32_CMT 0x40000000 /* Client Mode Translation for 32-bit DMA */ ++#define BCMA_DMA_TRANSLATION_DMA64_CMT 0x80000000 /* Client Mode Translation for 64-bit DMA */ ++extern u32 bcma_core_dma_translation(struct bcma_device *core); ++ ++#endif /* LINUX_BCMA_H_ */ +--- /dev/null ++++ b/include/linux/bcma/bcma_driver_chipcommon.h +@@ -0,0 +1,296 @@ ++#ifndef LINUX_BCMA_DRIVER_CC_H_ ++#define LINUX_BCMA_DRIVER_CC_H_ ++ ++/** ChipCommon core registers. **/ ++#define BCMA_CC_ID 0x0000 ++#define BCMA_CC_ID_ID 0x0000FFFF ++#define BCMA_CC_ID_ID_SHIFT 0 ++#define BCMA_CC_ID_REV 0x000F0000 ++#define BCMA_CC_ID_REV_SHIFT 16 ++#define BCMA_CC_ID_PKG 0x00F00000 ++#define BCMA_CC_ID_PKG_SHIFT 20 ++#define BCMA_CC_ID_NRCORES 0x0F000000 ++#define BCMA_CC_ID_NRCORES_SHIFT 24 ++#define BCMA_CC_ID_TYPE 0xF0000000 ++#define BCMA_CC_ID_TYPE_SHIFT 28 ++#define BCMA_CC_CAP 0x0004 /* Capabilities */ ++#define BCMA_CC_CAP_NRUART 0x00000003 /* # of UARTs */ ++#define BCMA_CC_CAP_MIPSEB 0x00000004 /* MIPS in BigEndian Mode */ ++#define BCMA_CC_CAP_UARTCLK 0x00000018 /* UART clock select */ ++#define BCMA_CC_CAP_UARTCLK_INT 0x00000008 /* UARTs are driven by internal divided clock */ ++#define BCMA_CC_CAP_UARTGPIO 0x00000020 /* UARTs on GPIO 15-12 */ ++#define BCMA_CC_CAP_EXTBUS 0x000000C0 /* External buses present */ ++#define BCMA_CC_CAP_FLASHT 0x00000700 /* Flash Type */ ++#define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */ ++#define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */ ++#define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ ++#define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ ++#define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ ++#define BCMA_PLLTYPE_NONE 0x00000000 ++#define BCMA_PLLTYPE_1 0x00010000 /* 48Mhz base, 3 dividers */ ++#define BCMA_PLLTYPE_2 0x00020000 /* 48Mhz, 4 dividers */ ++#define BCMA_PLLTYPE_3 0x00030000 /* 25Mhz, 2 dividers */ ++#define BCMA_PLLTYPE_4 0x00008000 /* 48Mhz, 4 dividers */ ++#define BCMA_PLLTYPE_5 0x00018000 /* 25Mhz, 4 dividers */ ++#define BCMA_PLLTYPE_6 0x00028000 /* 100/200 or 120/240 only */ ++#define BCMA_PLLTYPE_7 0x00038000 /* 25Mhz, 4 dividers */ ++#define BCMA_CC_CAP_PCTL 0x00040000 /* Power Control */ ++#define BCMA_CC_CAP_OTPS 0x00380000 /* OTP size */ ++#define BCMA_CC_CAP_OTPS_SHIFT 19 ++#define BCMA_CC_CAP_OTPS_BASE 5 ++#define BCMA_CC_CAP_JTAGM 0x00400000 /* JTAG master present */ ++#define BCMA_CC_CAP_BROM 0x00800000 /* Internal boot ROM active */ ++#define BCMA_CC_CAP_64BIT 0x08000000 /* 64-bit Backplane */ ++#define BCMA_CC_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */ ++#define BCMA_CC_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */ ++#define BCMA_CC_CAP_SPROM 0x40000000 /* SPROM present */ ++#define BCMA_CC_CORECTL 0x0008 ++#define BCMA_CC_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */ ++#define BCMA_CC_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ ++#define BCMA_CC_CORECTL_UARTCLKEN 0x00000008 /* UART clock enable (rev >= 21) */ ++#define BCMA_CC_BIST 0x000C ++#define BCMA_CC_OTPS 0x0010 /* OTP status */ ++#define BCMA_CC_OTPS_PROGFAIL 0x80000000 ++#define BCMA_CC_OTPS_PROTECT 0x00000007 ++#define BCMA_CC_OTPS_HW_PROTECT 0x00000001 ++#define BCMA_CC_OTPS_SW_PROTECT 0x00000002 ++#define BCMA_CC_OTPS_CID_PROTECT 0x00000004 ++#define BCMA_CC_OTPC 0x0014 /* OTP control */ ++#define BCMA_CC_OTPC_RECWAIT 0xFF000000 ++#define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00 ++#define BCMA_CC_OTPC_PRW_SHIFT 8 ++#define BCMA_CC_OTPC_MAXFAIL 0x00000038 ++#define BCMA_CC_OTPC_VSEL 0x00000006 ++#define BCMA_CC_OTPC_SELVL 0x00000001 ++#define BCMA_CC_OTPP 0x0018 /* OTP prog */ ++#define BCMA_CC_OTPP_COL 0x000000FF ++#define BCMA_CC_OTPP_ROW 0x0000FF00 ++#define BCMA_CC_OTPP_ROW_SHIFT 8 ++#define BCMA_CC_OTPP_READERR 0x10000000 ++#define BCMA_CC_OTPP_VALUE 0x20000000 ++#define BCMA_CC_OTPP_READ 0x40000000 ++#define BCMA_CC_OTPP_START 0x80000000 ++#define BCMA_CC_OTPP_BUSY 0x80000000 ++#define BCMA_CC_IRQSTAT 0x0020 ++#define BCMA_CC_IRQMASK 0x0024 ++#define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */ ++#define BCMA_CC_IRQ_EXT 0x00000002 /* ro: ext intr pin (corerev >= 3) */ ++#define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */ ++#define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */ ++#define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */ ++#define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ ++#define BCMA_CC_JCMD_START 0x80000000 ++#define BCMA_CC_JCMD_BUSY 0x80000000 ++#define BCMA_CC_JCMD_PAUSE 0x40000000 ++#define BCMA_CC_JCMD0_ACC_MASK 0x0000F000 ++#define BCMA_CC_JCMD0_ACC_IRDR 0x00000000 ++#define BCMA_CC_JCMD0_ACC_DR 0x00001000 ++#define BCMA_CC_JCMD0_ACC_IR 0x00002000 ++#define BCMA_CC_JCMD0_ACC_RESET 0x00003000 ++#define BCMA_CC_JCMD0_ACC_IRPDR 0x00004000 ++#define BCMA_CC_JCMD0_ACC_PDR 0x00005000 ++#define BCMA_CC_JCMD0_IRW_MASK 0x00000F00 ++#define BCMA_CC_JCMD_ACC_MASK 0x000F0000 /* Changes for corerev 11 */ ++#define BCMA_CC_JCMD_ACC_IRDR 0x00000000 ++#define BCMA_CC_JCMD_ACC_DR 0x00010000 ++#define BCMA_CC_JCMD_ACC_IR 0x00020000 ++#define BCMA_CC_JCMD_ACC_RESET 0x00030000 ++#define BCMA_CC_JCMD_ACC_IRPDR 0x00040000 ++#define BCMA_CC_JCMD_ACC_PDR 0x00050000 ++#define BCMA_CC_JCMD_IRW_MASK 0x00001F00 ++#define BCMA_CC_JCMD_IRW_SHIFT 8 ++#define BCMA_CC_JCMD_DRW_MASK 0x0000003F ++#define BCMA_CC_JIR 0x0034 /* Rev >= 10 only */ ++#define BCMA_CC_JDR 0x0038 /* Rev >= 10 only */ ++#define BCMA_CC_JCTL 0x003C /* Rev >= 10 only */ ++#define BCMA_CC_JCTL_FORCE_CLK 4 /* Force clock */ ++#define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */ ++#define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */ ++#define BCMA_CC_FLASHCTL 0x0040 ++#define BCMA_CC_FLASHCTL_START 0x80000000 ++#define BCMA_CC_FLASHCTL_BUSY BCMA_CC_FLASHCTL_START ++#define BCMA_CC_FLASHADDR 0x0044 ++#define BCMA_CC_FLASHDATA 0x0048 ++#define BCMA_CC_BCAST_ADDR 0x0050 ++#define BCMA_CC_BCAST_DATA 0x0054 ++#define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */ ++#define BCMA_CC_GPIOPULLDOWN 0x005C /* Rev >= 20 only */ ++#define BCMA_CC_GPIOIN 0x0060 ++#define BCMA_CC_GPIOOUT 0x0064 ++#define BCMA_CC_GPIOOUTEN 0x0068 ++#define BCMA_CC_GPIOCTL 0x006C ++#define BCMA_CC_GPIOPOL 0x0070 ++#define BCMA_CC_GPIOIRQ 0x0074 ++#define BCMA_CC_WATCHDOG 0x0080 ++#define BCMA_CC_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */ ++#define BCMA_CC_GPIOTIMER_OFFTIME 0x0000FFFF ++#define BCMA_CC_GPIOTIMER_OFFTIME_SHIFT 0 ++#define BCMA_CC_GPIOTIMER_ONTIME 0xFFFF0000 ++#define BCMA_CC_GPIOTIMER_ONTIME_SHIFT 16 ++#define BCMA_CC_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */ ++#define BCMA_CC_CLOCK_N 0x0090 ++#define BCMA_CC_CLOCK_SB 0x0094 ++#define BCMA_CC_CLOCK_PCI 0x0098 ++#define BCMA_CC_CLOCK_M2 0x009C ++#define BCMA_CC_CLOCK_MIPS 0x00A0 ++#define BCMA_CC_CLKDIV 0x00A4 /* Rev >= 3 only */ ++#define BCMA_CC_CLKDIV_SFLASH 0x0F000000 ++#define BCMA_CC_CLKDIV_SFLASH_SHIFT 24 ++#define BCMA_CC_CLKDIV_OTP 0x000F0000 ++#define BCMA_CC_CLKDIV_OTP_SHIFT 16 ++#define BCMA_CC_CLKDIV_JTAG 0x00000F00 ++#define BCMA_CC_CLKDIV_JTAG_SHIFT 8 ++#define BCMA_CC_CLKDIV_UART 0x000000FF ++#define BCMA_CC_CAP_EXT 0x00AC /* Capabilities */ ++#define BCMA_CC_PLLONDELAY 0x00B0 /* Rev >= 4 only */ ++#define BCMA_CC_FREFSELDELAY 0x00B4 /* Rev >= 4 only */ ++#define BCMA_CC_SLOWCLKCTL 0x00B8 /* 6 <= Rev <= 9 only */ ++#define BCMA_CC_SLOWCLKCTL_SRC 0x00000007 /* slow clock source mask */ ++#define BCMA_CC_SLOWCLKCTL_SRC_LPO 0x00000000 /* source of slow clock is LPO */ ++#define BCMA_CC_SLOWCLKCTL_SRC_XTAL 0x00000001 /* source of slow clock is crystal */ ++#define BCMA_CC_SLOECLKCTL_SRC_PCI 0x00000002 /* source of slow clock is PCI */ ++#define BCMA_CC_SLOWCLKCTL_LPOFREQ 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */ ++#define BCMA_CC_SLOWCLKCTL_LPOPD 0x00000400 /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */ ++#define BCMA_CC_SLOWCLKCTL_FSLOW 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */ ++#define BCMA_CC_SLOWCLKCTL_IPLL 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */ ++#define BCMA_CC_SLOWCLKCTL_ENXTAL 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */ ++#define BCMA_CC_SLOWCLKCTL_XTALPU 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */ ++#define BCMA_CC_SLOWCLKCTL_CLKDIV 0xFFFF0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */ ++#define BCMA_CC_SLOWCLKCTL_CLKDIV_SHIFT 16 ++#define BCMA_CC_SYSCLKCTL 0x00C0 /* Rev >= 3 only */ ++#define BCMA_CC_SYSCLKCTL_IDLPEN 0x00000001 /* ILPen: Enable Idle Low Power */ ++#define BCMA_CC_SYSCLKCTL_ALPEN 0x00000002 /* ALPen: Enable Active Low Power */ ++#define BCMA_CC_SYSCLKCTL_PLLEN 0x00000004 /* ForcePLLOn */ ++#define BCMA_CC_SYSCLKCTL_FORCEALP 0x00000008 /* Force ALP (or HT if ALPen is not set */ ++#define BCMA_CC_SYSCLKCTL_FORCEHT 0x00000010 /* Force HT */ ++#define BCMA_CC_SYSCLKCTL_CLKDIV 0xFFFF0000 /* ClkDiv (ILP = 1/(4+divisor)) */ ++#define BCMA_CC_SYSCLKCTL_CLKDIV_SHIFT 16 ++#define BCMA_CC_CLKSTSTR 0x00C4 /* Rev >= 3 only */ ++#define BCMA_CC_EROM 0x00FC ++#define BCMA_CC_PCMCIA_CFG 0x0100 ++#define BCMA_CC_PCMCIA_MEMWAIT 0x0104 ++#define BCMA_CC_PCMCIA_ATTRWAIT 0x0108 ++#define BCMA_CC_PCMCIA_IOWAIT 0x010C ++#define BCMA_CC_IDE_CFG 0x0110 ++#define BCMA_CC_IDE_MEMWAIT 0x0114 ++#define BCMA_CC_IDE_ATTRWAIT 0x0118 ++#define BCMA_CC_IDE_IOWAIT 0x011C ++#define BCMA_CC_PROG_CFG 0x0120 ++#define BCMA_CC_PROG_WAITCNT 0x0124 ++#define BCMA_CC_FLASH_CFG 0x0128 ++#define BCMA_CC_FLASH_WAITCNT 0x012C ++/* 0x1E0 is defined as shared BCMA_CLKCTLST */ ++#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ ++#define BCMA_CC_UART0_DATA 0x0300 ++#define BCMA_CC_UART0_IMR 0x0304 ++#define BCMA_CC_UART0_FCR 0x0308 ++#define BCMA_CC_UART0_LCR 0x030C ++#define BCMA_CC_UART0_MCR 0x0310 ++#define BCMA_CC_UART0_LSR 0x0314 ++#define BCMA_CC_UART0_MSR 0x0318 ++#define BCMA_CC_UART0_SCRATCH 0x031C ++#define BCMA_CC_UART1_DATA 0x0400 ++#define BCMA_CC_UART1_IMR 0x0404 ++#define BCMA_CC_UART1_FCR 0x0408 ++#define BCMA_CC_UART1_LCR 0x040C ++#define BCMA_CC_UART1_MCR 0x0410 ++#define BCMA_CC_UART1_LSR 0x0414 ++#define BCMA_CC_UART1_MSR 0x0418 ++#define BCMA_CC_UART1_SCRATCH 0x041C ++/* PMU registers (rev >= 20) */ ++#define BCMA_CC_PMU_CTL 0x0600 /* PMU control */ ++#define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ ++#define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16 ++#define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ ++#define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ ++#define BCMA_CC_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */ ++#define BCMA_CC_PMU_CTL_XTALFREQ 0x0000007C /* Crystal freq */ ++#define BCMA_CC_PMU_CTL_XTALFREQ_SHIFT 2 ++#define BCMA_CC_PMU_CTL_ILPDIVEN 0x00000002 /* ILP div enable */ ++#define BCMA_CC_PMU_CTL_LPOSEL 0x00000001 /* LPO sel */ ++#define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */ ++#define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */ ++#define BCMA_CC_PMU_STAT 0x0608 /* PMU status */ ++#define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */ ++#define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */ ++#define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */ ++#define BCMA_CC_PMU_STAT_HAVEHT 0x00000004 /* HT available */ ++#define BCMA_CC_PMU_STAT_RESINIT 0x00000003 /* Res init */ ++#define BCMA_CC_PMU_RES_STAT 0x060C /* PMU res status */ ++#define BCMA_CC_PMU_RES_PEND 0x0610 /* PMU res pending */ ++#define BCMA_CC_PMU_TIMER 0x0614 /* PMU timer */ ++#define BCMA_CC_PMU_MINRES_MSK 0x0618 /* PMU min res mask */ ++#define BCMA_CC_PMU_MAXRES_MSK 0x061C /* PMU max res mask */ ++#define BCMA_CC_PMU_RES_TABSEL 0x0620 /* PMU res table sel */ ++#define BCMA_CC_PMU_RES_DEPMSK 0x0624 /* PMU res dep mask */ ++#define BCMA_CC_PMU_RES_UPDNTM 0x0628 /* PMU res updown timer */ ++#define BCMA_CC_PMU_RES_TIMER 0x062C /* PMU res timer */ ++#define BCMA_CC_PMU_CLKSTRETCH 0x0630 /* PMU clockstretch */ ++#define BCMA_CC_PMU_WATCHDOG 0x0634 /* PMU watchdog */ ++#define BCMA_CC_PMU_RES_REQTS 0x0640 /* PMU res req timer sel */ ++#define BCMA_CC_PMU_RES_REQT 0x0644 /* PMU res req timer */ ++#define BCMA_CC_PMU_RES_REQM 0x0648 /* PMU res req mask */ ++#define BCMA_CC_CHIPCTL_ADDR 0x0650 ++#define BCMA_CC_CHIPCTL_DATA 0x0654 ++#define BCMA_CC_REGCTL_ADDR 0x0658 ++#define BCMA_CC_REGCTL_DATA 0x065C ++#define BCMA_CC_PLLCTL_ADDR 0x0660 ++#define BCMA_CC_PLLCTL_DATA 0x0664 ++#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ ++#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ ++ ++/* Data for the PMU, if available. ++ * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) ++ */ ++struct bcma_chipcommon_pmu { ++ u8 rev; /* PMU revision */ ++ u32 crystalfreq; /* The active crystal frequency (in kHz) */ ++}; ++ ++struct bcma_drv_cc { ++ struct bcma_device *core; ++ u32 status; ++ u32 capabilities; ++ u32 capabilities_ext; ++ /* Fast Powerup Delay constant */ ++ u16 fast_pwrup_delay; ++ struct bcma_chipcommon_pmu pmu; ++}; ++ ++/* Register access */ ++#define bcma_cc_read32(cc, offset) \ ++ bcma_read32((cc)->core, offset) ++#define bcma_cc_write32(cc, offset, val) \ ++ bcma_write32((cc)->core, offset, val) ++ ++#define bcma_cc_mask32(cc, offset, mask) \ ++ bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) & (mask)) ++#define bcma_cc_set32(cc, offset, set) \ ++ bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) | (set)) ++#define bcma_cc_maskset32(cc, offset, mask, set) \ ++ bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set)) ++ ++extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc); ++ ++extern void bcma_chipco_suspend(struct bcma_drv_cc *cc); ++extern void bcma_chipco_resume(struct bcma_drv_cc *cc); ++ ++extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, ++ u32 ticks); ++ ++void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value); ++ ++u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask); ++ ++/* Chipcommon GPIO pin access. */ ++u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask); ++u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value); ++u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value); ++u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value); ++u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value); ++u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value); ++ ++/* PMU support */ ++extern void bcma_pmu_init(struct bcma_drv_cc *cc); ++ ++#endif /* LINUX_BCMA_DRIVER_CC_H_ */ +--- /dev/null ++++ b/include/linux/bcma/bcma_driver_pci.h +@@ -0,0 +1,91 @@ ++#ifndef LINUX_BCMA_DRIVER_PCI_H_ ++#define LINUX_BCMA_DRIVER_PCI_H_ ++ ++#include <linux/types.h> ++ ++struct pci_dev; ++ ++/** PCI core registers. **/ ++#define BCMA_CORE_PCI_CTL 0x0000 /* PCI Control */ ++#define BCMA_CORE_PCI_CTL_RST_OE 0x00000001 /* PCI_RESET Output Enable */ ++#define BCMA_CORE_PCI_CTL_RST 0x00000002 /* PCI_RESET driven out to pin */ ++#define BCMA_CORE_PCI_CTL_CLK_OE 0x00000004 /* Clock gate Output Enable */ ++#define BCMA_CORE_PCI_CTL_CLK 0x00000008 /* Gate for clock driven out to pin */ ++#define BCMA_CORE_PCI_ARBCTL 0x0010 /* PCI Arbiter Control */ ++#define BCMA_CORE_PCI_ARBCTL_INTERN 0x00000001 /* Use internal arbiter */ ++#define BCMA_CORE_PCI_ARBCTL_EXTERN 0x00000002 /* Use external arbiter */ ++#define BCMA_CORE_PCI_ARBCTL_PARKID 0x00000006 /* Mask, selects which agent is parked on an idle bus */ ++#define BCMA_CORE_PCI_ARBCTL_PARKID_LAST 0x00000000 /* Last requestor */ ++#define BCMA_CORE_PCI_ARBCTL_PARKID_4710 0x00000002 /* 4710 */ ++#define BCMA_CORE_PCI_ARBCTL_PARKID_EXT0 0x00000004 /* External requestor 0 */ ++#define BCMA_CORE_PCI_ARBCTL_PARKID_EXT1 0x00000006 /* External requestor 1 */ ++#define BCMA_CORE_PCI_ISTAT 0x0020 /* Interrupt status */ ++#define BCMA_CORE_PCI_ISTAT_INTA 0x00000001 /* PCI INTA# */ ++#define BCMA_CORE_PCI_ISTAT_INTB 0x00000002 /* PCI INTB# */ ++#define BCMA_CORE_PCI_ISTAT_SERR 0x00000004 /* PCI SERR# (write to clear) */ ++#define BCMA_CORE_PCI_ISTAT_PERR 0x00000008 /* PCI PERR# (write to clear) */ ++#define BCMA_CORE_PCI_ISTAT_PME 0x00000010 /* PCI PME# */ ++#define BCMA_CORE_PCI_IMASK 0x0024 /* Interrupt mask */ ++#define BCMA_CORE_PCI_IMASK_INTA 0x00000001 /* PCI INTA# */ ++#define BCMA_CORE_PCI_IMASK_INTB 0x00000002 /* PCI INTB# */ ++#define BCMA_CORE_PCI_IMASK_SERR 0x00000004 /* PCI SERR# */ ++#define BCMA_CORE_PCI_IMASK_PERR 0x00000008 /* PCI PERR# */ ++#define BCMA_CORE_PCI_IMASK_PME 0x00000010 /* PCI PME# */ ++#define BCMA_CORE_PCI_MBOX 0x0028 /* Backplane to PCI Mailbox */ ++#define BCMA_CORE_PCI_MBOX_F0_0 0x00000100 /* PCI function 0, INT 0 */ ++#define BCMA_CORE_PCI_MBOX_F0_1 0x00000200 /* PCI function 0, INT 1 */ ++#define BCMA_CORE_PCI_MBOX_F1_0 0x00000400 /* PCI function 1, INT 0 */ ++#define BCMA_CORE_PCI_MBOX_F1_1 0x00000800 /* PCI function 1, INT 1 */ ++#define BCMA_CORE_PCI_MBOX_F2_0 0x00001000 /* PCI function 2, INT 0 */ ++#define BCMA_CORE_PCI_MBOX_F2_1 0x00002000 /* PCI function 2, INT 1 */ ++#define BCMA_CORE_PCI_MBOX_F3_0 0x00004000 /* PCI function 3, INT 0 */ ++#define BCMA_CORE_PCI_MBOX_F3_1 0x00008000 /* PCI function 3, INT 1 */ ++#define BCMA_CORE_PCI_BCAST_ADDR 0x0050 /* Backplane Broadcast Address */ ++#define BCMA_CORE_PCI_BCAST_ADDR_MASK 0x000000FF ++#define BCMA_CORE_PCI_BCAST_DATA 0x0054 /* Backplane Broadcast Data */ ++#define BCMA_CORE_PCI_GPIO_IN 0x0060 /* rev >= 2 only */ ++#define BCMA_CORE_PCI_GPIO_OUT 0x0064 /* rev >= 2 only */ ++#define BCMA_CORE_PCI_GPIO_ENABLE 0x0068 /* rev >= 2 only */ ++#define BCMA_CORE_PCI_GPIO_CTL 0x006C /* rev >= 2 only */ ++#define BCMA_CORE_PCI_SBTOPCI0 0x0100 /* Backplane to PCI translation 0 (sbtopci0) */ ++#define BCMA_CORE_PCI_SBTOPCI0_MASK 0xFC000000 ++#define BCMA_CORE_PCI_SBTOPCI1 0x0104 /* Backplane to PCI translation 1 (sbtopci1) */ ++#define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000 ++#define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */ ++#define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000 ++#define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */ ++#define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */ ++#define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */ ++#define BCMA_CORE_PCI_PCICFG3 0x0700 /* PCI config space 3 (rev >= 8) */ ++#define BCMA_CORE_PCI_SPROM(wordoffset) (0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */ ++ ++/* SBtoPCIx */ ++#define BCMA_CORE_PCI_SBTOPCI_MEM 0x00000000 ++#define BCMA_CORE_PCI_SBTOPCI_IO 0x00000001 ++#define BCMA_CORE_PCI_SBTOPCI_CFG0 0x00000002 ++#define BCMA_CORE_PCI_SBTOPCI_CFG1 0x00000003 ++#define BCMA_CORE_PCI_SBTOPCI_PREF 0x00000004 /* Prefetch enable */ ++#define BCMA_CORE_PCI_SBTOPCI_BURST 0x00000008 /* Burst enable */ ++#define BCMA_CORE_PCI_SBTOPCI_MRM 0x00000020 /* Memory Read Multiple */ ++#define BCMA_CORE_PCI_SBTOPCI_RC 0x00000030 /* Read Command mask (rev >= 11) */ ++#define BCMA_CORE_PCI_SBTOPCI_RC_READ 0x00000000 /* Memory read */ ++#define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */ ++#define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */ ++ ++/* PCIcore specific boardflags */ ++#define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ ++ ++struct bcma_drv_pci { ++ struct bcma_device *core; ++ u8 setup_done:1; ++}; ++ ++/* Register access */ ++#define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset) ++#define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) ++ ++extern void bcma_core_pci_init(struct bcma_drv_pci *pc); ++extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, ++ struct bcma_device *core, bool enable); ++ ++#endif /* LINUX_BCMA_DRIVER_PCI_H_ */ +--- /dev/null ++++ b/include/linux/bcma/bcma_regs.h +@@ -0,0 +1,59 @@ ++#ifndef LINUX_BCMA_REGS_H_ ++#define LINUX_BCMA_REGS_H_ ++ ++/* Some single registers are shared between many cores */ ++/* BCMA_CLKCTLST: ChipCommon (rev >= 20), PCIe, 80211 */ ++#define BCMA_CLKCTLST 0x01E0 /* Clock control and status */ ++#define BCMA_CLKCTLST_FORCEALP 0x00000001 /* Force ALP request */ ++#define BCMA_CLKCTLST_FORCEHT 0x00000002 /* Force HT request */ ++#define BCMA_CLKCTLST_FORCEILP 0x00000004 /* Force ILP request */ ++#define BCMA_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */ ++#define BCMA_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */ ++#define BCMA_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */ ++#define BCMA_CLKCTLST_EXTRESREQ 0x00000700 /* Mask of external resource requests */ ++#define BCMA_CLKCTLST_HAVEALP 0x00010000 /* ALP available */ ++#define BCMA_CLKCTLST_HAVEHT 0x00020000 /* HT available */ ++#define BCMA_CLKCTLST_BP_ON_ALP 0x00040000 /* RO: running on ALP clock */ ++#define BCMA_CLKCTLST_BP_ON_HT 0x00080000 /* RO: running on HT clock */ ++#define BCMA_CLKCTLST_EXTRESST 0x07000000 /* Mask of external resource status */ ++/* Is there any BCM4328 on BCMA bus? */ ++#define BCMA_CLKCTLST_4328A0_HAVEHT 0x00010000 /* 4328a0 has reversed bits */ ++#define BCMA_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */ ++ ++/* Agent registers (common for every core) */ ++#define BCMA_IOCTL 0x0408 /* IO control */ ++#define BCMA_IOCTL_CLK 0x0001 ++#define BCMA_IOCTL_FGC 0x0002 ++#define BCMA_IOCTL_CORE_BITS 0x3FFC ++#define BCMA_IOCTL_PME_EN 0x4000 ++#define BCMA_IOCTL_BIST_EN 0x8000 ++#define BCMA_IOST 0x0500 /* IO status */ ++#define BCMA_IOST_CORE_BITS 0x0FFF ++#define BCMA_IOST_DMA64 0x1000 ++#define BCMA_IOST_GATED_CLK 0x2000 ++#define BCMA_IOST_BIST_ERROR 0x4000 ++#define BCMA_IOST_BIST_DONE 0x8000 ++#define BCMA_RESET_CTL 0x0800 ++#define BCMA_RESET_CTL_RESET 0x0001 ++ ++/* BCMA PCI config space registers. */ ++#define BCMA_PCI_PMCSR 0x44 ++#define BCMA_PCI_PE 0x100 ++#define BCMA_PCI_BAR0_WIN 0x80 /* Backplane address space 0 */ ++#define BCMA_PCI_BAR1_WIN 0x84 /* Backplane address space 1 */ ++#define BCMA_PCI_SPROMCTL 0x88 /* SPROM control */ ++#define BCMA_PCI_SPROMCTL_WE 0x10 /* SPROM write enable */ ++#define BCMA_PCI_BAR1_CONTROL 0x8c /* Address space 1 burst control */ ++#define BCMA_PCI_IRQS 0x90 /* PCI interrupts */ ++#define BCMA_PCI_IRQMASK 0x94 /* PCI IRQ control and mask (pcirev >= 6 only) */ ++#define BCMA_PCI_BACKPLANE_IRQS 0x98 /* Backplane Interrupts */ ++#define BCMA_PCI_BAR0_WIN2 0xAC ++#define BCMA_PCI_GPIO_IN 0xB0 /* GPIO Input (pcirev >= 3 only) */ ++#define BCMA_PCI_GPIO_OUT 0xB4 /* GPIO Output (pcirev >= 3 only) */ ++#define BCMA_PCI_GPIO_OUT_ENABLE 0xB8 /* GPIO Output Enable/Disable (pcirev >= 3 only) */ ++#define BCMA_PCI_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */ ++#define BCMA_PCI_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */ ++#define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ ++#define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ ++ ++#endif /* LINUX_BCMA_REGS_H_ */ +--- a/include/linux/mod_devicetable.h ++++ b/include/linux/mod_devicetable.h +@@ -382,6 +382,23 @@ struct ssb_device_id { + #define SSB_ANY_ID 0xFFFF + #define SSB_ANY_REV 0xFF + ++/* Broadcom's specific AMBA core, see drivers/bcma/ */ ++struct bcma_device_id { ++ __u16 manuf; ++ __u16 id; ++ __u8 rev; ++ __u8 class; ++}; ++#define BCMA_CORE(_manuf, _id, _rev, _class) \ ++ { .manuf = _manuf, .id = _id, .rev = _rev, .class = _class, } ++#define BCMA_CORETABLE_END \ ++ { 0, }, ++ ++#define BCMA_ANY_MANUF 0xFFFF ++#define BCMA_ANY_ID 0xFFFF ++#define BCMA_ANY_REV 0xFF ++#define BCMA_ANY_CLASS 0xFF ++ + struct virtio_device_id { + __u32 device; + __u32 vendor; +--- a/scripts/mod/file2alias.c ++++ b/scripts/mod/file2alias.c +@@ -633,6 +633,24 @@ static int do_ssb_entry(const char *file + return 1; + } + ++/* Looks like: bcma:mNidNrevNclN. */ ++static int do_bcma_entry(const char *filename, ++ struct bcma_device_id *id, char *alias) ++{ ++ id->manuf = TO_NATIVE(id->manuf); ++ id->id = TO_NATIVE(id->id); ++ id->rev = TO_NATIVE(id->rev); ++ id->class = TO_NATIVE(id->class); ++ ++ strcpy(alias, "bcma:"); ++ ADD(alias, "m", id->manuf != BCMA_ANY_MANUF, id->manuf); ++ ADD(alias, "id", id->id != BCMA_ANY_ID, id->id); ++ ADD(alias, "rev", id->rev != BCMA_ANY_REV, id->rev); ++ ADD(alias, "cl", id->class != BCMA_ANY_CLASS, id->class); ++ add_wildcard(alias); ++ return 1; ++} ++ + /* Looks like: virtio:dNvN */ + static int do_virtio_entry(const char *filename, struct virtio_device_id *id, + char *alias) +@@ -845,6 +863,10 @@ void handle_moddevtable(struct module *m + do_table(symval, sym->st_size, + sizeof(struct ssb_device_id), "ssb", + do_ssb_entry, mod); ++ else if (sym_is(symname, "__mod_bcma_device_table")) ++ do_table(symval, sym->st_size, ++ sizeof(struct bcma_device_id), "bcma", ++ do_bcma_entry, mod); + else if (sym_is(symname, "__mod_virtio_device_table")) + do_table(symval, sym->st_size, + sizeof(struct virtio_device_id), "virtio", +--- /dev/null ++++ b/drivers/bcma/sprom.c +@@ -0,0 +1,171 @@ ++/* ++ * Broadcom specific AMBA ++ * SPROM reading ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++ ++#include <linux/bcma/bcma.h> ++#include <linux/bcma/bcma_regs.h> ++#include <linux/pci.h> ++#include <linux/io.h> ++#include <linux/dma-mapping.h> ++#include <linux/slab.h> ++ ++#define SPOFF(offset) ((offset) / sizeof(u16)) ++ ++/************************************************** ++ * R/W ops. ++ **************************************************/ ++ ++static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom) ++{ ++ int i; ++ for (i = 0; i < SSB_SPROMSIZE_WORDS_R4; i++) ++ sprom[i] = bcma_read16(bus->drv_cc.core, ++ offset + (i * 2)); ++} ++ ++/************************************************** ++ * Validation. ++ **************************************************/ ++ ++static inline u8 bcma_crc8(u8 crc, u8 data) ++{ ++ /* Polynomial: x^8 + x^7 + x^6 + x^4 + x^2 + 1 */ ++ static const u8 t[] = { ++ 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B, ++ 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21, ++ 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF, ++ 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5, ++ 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14, ++ 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E, ++ 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80, ++ 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA, ++ 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95, ++ 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF, ++ 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01, ++ 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B, ++ 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA, ++ 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0, ++ 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E, ++ 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34, ++ 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0, ++ 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A, ++ 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54, ++ 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E, ++ 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF, ++ 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5, ++ 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B, ++ 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61, ++ 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E, ++ 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74, ++ 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA, ++ 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0, ++ 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41, ++ 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B, ++ 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5, ++ 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F, ++ }; ++ return t[crc ^ data]; ++} ++ ++static u8 bcma_sprom_crc(const u16 *sprom) ++{ ++ int word; ++ u8 crc = 0xFF; ++ ++ for (word = 0; word < SSB_SPROMSIZE_WORDS_R4 - 1; word++) { ++ crc = bcma_crc8(crc, sprom[word] & 0x00FF); ++ crc = bcma_crc8(crc, (sprom[word] & 0xFF00) >> 8); ++ } ++ crc = bcma_crc8(crc, sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & 0x00FF); ++ crc ^= 0xFF; ++ ++ return crc; ++} ++ ++static int bcma_sprom_check_crc(const u16 *sprom) ++{ ++ u8 crc; ++ u8 expected_crc; ++ u16 tmp; ++ ++ crc = bcma_sprom_crc(sprom); ++ tmp = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_CRC; ++ expected_crc = tmp >> SSB_SPROM_REVISION_CRC_SHIFT; ++ if (crc != expected_crc) ++ return -EPROTO; ++ ++ return 0; ++} ++ ++static int bcma_sprom_valid(const u16 *sprom) ++{ ++ u16 revision; ++ int err; ++ ++ err = bcma_sprom_check_crc(sprom); ++ if (err) ++ return err; ++ ++ revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_REV; ++ if (revision != 8 && revision != 9) { ++ pr_err("Unsupported SPROM revision: %d\n", revision); ++ return -ENOENT; ++ } ++ ++ return 0; ++} ++ ++/************************************************** ++ * SPROM extraction. ++ **************************************************/ ++ ++static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom) ++{ ++ u16 v; ++ int i; ++ ++ for (i = 0; i < 3; i++) { ++ v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i]; ++ *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); ++ } ++} ++ ++int bcma_sprom_get(struct bcma_bus *bus) ++{ ++ u16 offset; ++ u16 *sprom; ++ int err = 0; ++ ++ if (!bus->drv_cc.core) ++ return -EOPNOTSUPP; ++ ++ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) ++ return -ENOENT; ++ ++ sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), ++ GFP_KERNEL); ++ if (!sprom) ++ return -ENOMEM; ++ ++ /* Most cards have SPROM moved by additional offset 0x30 (48 dwords). ++ * According to brcm80211 this applies to cards with PCIe rev >= 6 ++ * TODO: understand this condition and use it */ ++ offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM : ++ BCMA_CC_SPROM_PCIE6; ++ bcma_sprom_read(bus, offset, sprom); ++ ++ err = bcma_sprom_valid(sprom); ++ if (err) ++ goto out; ++ ++ bcma_sprom_extract_r8(bus, sprom); ++ ++out: ++ kfree(sprom); ++ return err; ++} +--- /dev/null ++++ b/drivers/bcma/driver_pci_host.c +@@ -0,0 +1,14 @@ ++/* ++ * Broadcom specific AMBA ++ * PCI Core in hostmode ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++#include <linux/bcma/bcma.h> ++ ++void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) ++{ ++ pr_err("No support for PCI core in hostmode yet\n"); ++} |