summaryrefslogtreecommitdiffstats
path: root/target/linux/generic/patches-2.6.30/025-bcma_backport.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/generic/patches-2.6.30/025-bcma_backport.patch')
-rw-r--r--target/linux/generic/patches-2.6.30/025-bcma_backport.patch2715
1 files changed, 2715 insertions, 0 deletions
diff --git a/target/linux/generic/patches-2.6.30/025-bcma_backport.patch b/target/linux/generic/patches-2.6.30/025-bcma_backport.patch
new file mode 100644
index 000000000..f9c994a60
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/025-bcma_backport.patch
@@ -0,0 +1,2715 @@
+--- /dev/null
++++ b/Documentation/ABI/testing/sysfs-bus-bcma
+@@ -0,0 +1,31 @@
++What: /sys/bus/bcma/devices/.../manuf
++Date: May 2011
++KernelVersion: 2.6.40
++Contact: Rafał Miłecki <zajec5@gmail.com>
++Description:
++ Each BCMA core has it's manufacturer id. See
++ include/linux/bcma/bcma.h for possible values.
++
++What: /sys/bus/bcma/devices/.../id
++Date: May 2011
++KernelVersion: 2.6.40
++Contact: Rafał Miłecki <zajec5@gmail.com>
++Description:
++ There are a few types of BCMA cores, they can be identified by
++ id field.
++
++What: /sys/bus/bcma/devices/.../rev
++Date: May 2011
++KernelVersion: 2.6.40
++Contact: Rafał Miłecki <zajec5@gmail.com>
++Description:
++ BCMA cores of the same type can still slightly differ depending
++ on their revision. Use it for detailed programming.
++
++What: /sys/bus/bcma/devices/.../class
++Date: May 2011
++KernelVersion: 2.6.40
++Contact: Rafał Miłecki <zajec5@gmail.com>
++Description:
++ Each BCMA core is identified by few fields, including class it
++ belongs to. See include/linux/bcma/bcma.h for possible values.
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -5264,6 +5264,13 @@ S: Maintained
+ F: drivers/ssb/
+ F: include/linux/ssb/
+
++BROADCOM SPECIFIC AMBA DRIVER (BCMA)
++M: Rafał Miłecki <zajec5@gmail.com>
++L: linux-wireless@vger.kernel.org
++S: Maintained
++F: drivers/bcma/
++F: include/linux/bcma/
++
+ SONY VAIO CONTROL DEVICE DRIVER
+ P: Mattia Dongili
+ M: malattia@linux.it
+--- a/drivers/Kconfig
++++ b/drivers/Kconfig
+@@ -66,6 +66,8 @@ source "drivers/watchdog/Kconfig"
+
+ source "drivers/ssb/Kconfig"
+
++source "drivers/bcma/Kconfig"
++
+ source "drivers/mfd/Kconfig"
+
+ source "drivers/regulator/Kconfig"
+--- a/drivers/Makefile
++++ b/drivers/Makefile
+@@ -104,6 +104,7 @@ obj-$(CONFIG_HID) += hid/
+ obj-$(CONFIG_PPC_PS3) += ps3/
+ obj-$(CONFIG_OF) += of/
+ obj-$(CONFIG_SSB) += ssb/
++obj-$(CONFIG_BCMA) += bcma/
+ obj-$(CONFIG_VIRTIO) += virtio/
+ obj-$(CONFIG_STAGING) += staging/
+ obj-y += platform/
+--- /dev/null
++++ b/drivers/bcma/Kconfig
+@@ -0,0 +1,44 @@
++config BCMA_POSSIBLE
++ bool
++ depends on HAS_IOMEM && HAS_DMA
++ default y
++
++menu "Broadcom specific AMBA"
++ depends on BCMA_POSSIBLE
++
++config BCMA
++ tristate "BCMA support"
++ depends on BCMA_POSSIBLE
++ help
++ Bus driver for Broadcom specific Advanced Microcontroller Bus
++ Architecture.
++
++# Support for Block-I/O. SELECT this from the driver that needs it.
++config BCMA_BLOCKIO
++ bool
++ depends on BCMA
++
++config BCMA_HOST_PCI_POSSIBLE
++ bool
++ depends on BCMA && PCI = y
++ default y
++
++config BCMA_HOST_PCI
++ bool "Support for BCMA on PCI-host bus"
++ depends on BCMA_HOST_PCI_POSSIBLE
++
++config BCMA_DRIVER_PCI_HOSTMODE
++ bool "Driver for PCI core working in hostmode"
++ depends on BCMA && MIPS
++ help
++ PCI core hostmode operation (external PCI bus).
++
++config BCMA_DEBUG
++ bool "BCMA debugging"
++ depends on BCMA
++ help
++ This turns on additional debugging messages.
++
++ If unsure, say N
++
++endmenu
+--- /dev/null
++++ b/drivers/bcma/Makefile
+@@ -0,0 +1,8 @@
++bcma-y += main.o scan.o core.o sprom.o
++bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o
++bcma-y += driver_pci.o
++bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o
++bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o
++obj-$(CONFIG_BCMA) += bcma.o
++
++ccflags-$(CONFIG_BCMA_DEBUG) := -DDEBUG
+--- /dev/null
++++ b/drivers/bcma/README
+@@ -0,0 +1,19 @@
++Broadcom introduced new bus as replacement for older SSB. It is based on AMBA,
++however from programming point of view there is nothing AMBA specific we use.
++
++Standard AMBA drivers are platform specific, have hardcoded addresses and use
++AMBA standard fields like CID and PID.
++
++In case of Broadcom's cards every device consists of:
++1) Broadcom specific AMBA device. It is put on AMBA bus, but can not be treated
++ as standard AMBA device. Reading it's CID or PID can cause machine lockup.
++2) AMBA standard devices called ports or wrappers. They have CIDs (AMBA_CID)
++ and PIDs (0x103BB369), but we do not use that info for anything. One of that
++ devices is used for managing Broadcom specific core.
++
++Addresses of AMBA devices are not hardcoded in driver and have to be read from
++EPROM.
++
++In this situation we decided to introduce separated bus. It can contain up to
++16 devices identified by Broadcom specific fields: manufacturer, id, revision
++and class.
+--- /dev/null
++++ b/drivers/bcma/TODO
+@@ -0,0 +1,3 @@
++- Interrupts
++- Defines for PCI core driver
++- Create kernel Documentation (use info from README)
+--- /dev/null
++++ b/drivers/bcma/bcma_private.h
+@@ -0,0 +1,35 @@
++#ifndef LINUX_BCMA_PRIVATE_H_
++#define LINUX_BCMA_PRIVATE_H_
++
++#ifndef pr_fmt
++#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
++#endif
++
++#include <linux/bcma/bcma.h>
++#include <linux/delay.h>
++
++#define BCMA_CORE_SIZE 0x1000
++
++struct bcma_bus;
++
++/* main.c */
++int bcma_bus_register(struct bcma_bus *bus);
++void bcma_bus_unregister(struct bcma_bus *bus);
++
++/* scan.c */
++int bcma_bus_scan(struct bcma_bus *bus);
++
++/* sprom.c */
++int bcma_sprom_get(struct bcma_bus *bus);
++
++#ifdef CONFIG_BCMA_HOST_PCI
++/* host_pci.c */
++extern int __init bcma_host_pci_init(void);
++extern void __exit bcma_host_pci_exit(void);
++#endif /* CONFIG_BCMA_HOST_PCI */
++
++#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
++void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc);
++#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
++
++#endif
+--- /dev/null
++++ b/drivers/bcma/core.c
+@@ -0,0 +1,124 @@
++/*
++ * Broadcom specific AMBA
++ * Core ops
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "bcma_private.h"
++#include <linux/bcma/bcma.h>
++
++bool bcma_core_is_enabled(struct bcma_device *core)
++{
++ if ((bcma_aread32(core, BCMA_IOCTL) & (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC))
++ != BCMA_IOCTL_CLK)
++ return false;
++ if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
++ return false;
++ return true;
++}
++EXPORT_SYMBOL_GPL(bcma_core_is_enabled);
++
++void bcma_core_disable(struct bcma_device *core, u32 flags)
++{
++ if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
++ return;
++
++ bcma_awrite32(core, BCMA_IOCTL, flags);
++ bcma_aread32(core, BCMA_IOCTL);
++ udelay(10);
++
++ bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
++ udelay(1);
++}
++EXPORT_SYMBOL_GPL(bcma_core_disable);
++
++int bcma_core_enable(struct bcma_device *core, u32 flags)
++{
++ bcma_core_disable(core, flags);
++
++ bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC | flags));
++ bcma_aread32(core, BCMA_IOCTL);
++
++ bcma_awrite32(core, BCMA_RESET_CTL, 0);
++ udelay(1);
++
++ bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags));
++ bcma_aread32(core, BCMA_IOCTL);
++ udelay(1);
++
++ return 0;
++}
++EXPORT_SYMBOL_GPL(bcma_core_enable);
++
++void bcma_core_set_clockmode(struct bcma_device *core,
++ enum bcma_clkmode clkmode)
++{
++ u16 i;
++
++ WARN_ON(core->id.id != BCMA_CORE_CHIPCOMMON &&
++ core->id.id != BCMA_CORE_PCIE &&
++ core->id.id != BCMA_CORE_80211);
++
++ switch (clkmode) {
++ case BCMA_CLKMODE_FAST:
++ bcma_set32(core, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT);
++ udelay(64);
++ for (i = 0; i < 1500; i++) {
++ if (bcma_read32(core, BCMA_CLKCTLST) &
++ BCMA_CLKCTLST_HAVEHT) {
++ i = 0;
++ break;
++ }
++ udelay(10);
++ }
++ if (i)
++ pr_err("HT force timeout\n");
++ break;
++ case BCMA_CLKMODE_DYNAMIC:
++ pr_warning("Dynamic clockmode not supported yet!\n");
++ break;
++ }
++}
++EXPORT_SYMBOL_GPL(bcma_core_set_clockmode);
++
++void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status, bool on)
++{
++ u16 i;
++
++ WARN_ON(req & ~BCMA_CLKCTLST_EXTRESREQ);
++ WARN_ON(status & ~BCMA_CLKCTLST_EXTRESST);
++
++ if (on) {
++ bcma_set32(core, BCMA_CLKCTLST, req);
++ for (i = 0; i < 10000; i++) {
++ if ((bcma_read32(core, BCMA_CLKCTLST) & status) ==
++ status) {
++ i = 0;
++ break;
++ }
++ udelay(10);
++ }
++ if (i)
++ pr_err("PLL enable timeout\n");
++ } else {
++ pr_warning("Disabling PLL not supported yet!\n");
++ }
++}
++EXPORT_SYMBOL_GPL(bcma_core_pll_ctl);
++
++u32 bcma_core_dma_translation(struct bcma_device *core)
++{
++ switch (core->bus->hosttype) {
++ case BCMA_HOSTTYPE_PCI:
++ if (bcma_aread32(core, BCMA_IOST) & BCMA_IOST_DMA64)
++ return BCMA_DMA_TRANSLATION_DMA64_CMT;
++ else
++ return BCMA_DMA_TRANSLATION_DMA32_CMT;
++ default:
++ pr_err("DMA translation unknown for host %d\n",
++ core->bus->hosttype);
++ }
++ return BCMA_DMA_TRANSLATION_NONE;
++}
++EXPORT_SYMBOL(bcma_core_dma_translation);
+--- /dev/null
++++ b/drivers/bcma/driver_chipcommon.c
+@@ -0,0 +1,103 @@
++/*
++ * Broadcom specific AMBA
++ * ChipCommon core driver
++ *
++ * Copyright 2005, Broadcom Corporation
++ * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "bcma_private.h"
++#include <linux/bcma/bcma.h>
++
++static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
++ u32 mask, u32 value)
++{
++ value &= mask;
++ value |= bcma_cc_read32(cc, offset) & ~mask;
++ bcma_cc_write32(cc, offset, value);
++
++ return value;
++}
++
++void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
++{
++ u32 leddc_on = 10;
++ u32 leddc_off = 90;
++
++ if (cc->core->id.rev >= 11)
++ cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
++ cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP);
++ if (cc->core->id.rev >= 35)
++ cc->capabilities_ext = bcma_cc_read32(cc, BCMA_CC_CAP_EXT);
++
++ if (cc->core->id.rev >= 20) {
++ bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
++ bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
++ }
++
++ if (cc->capabilities & BCMA_CC_CAP_PMU)
++ bcma_pmu_init(cc);
++ if (cc->capabilities & BCMA_CC_CAP_PCTL)
++ pr_err("Power control not implemented!\n");
++
++ if (cc->core->id.rev >= 16) {
++ if (cc->core->bus->sprom.leddc_on_time &&
++ cc->core->bus->sprom.leddc_off_time) {
++ leddc_on = cc->core->bus->sprom.leddc_on_time;
++ leddc_off = cc->core->bus->sprom.leddc_off_time;
++ }
++ bcma_cc_write32(cc, BCMA_CC_GPIOTIMER,
++ ((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) |
++ (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT)));
++ }
++}
++
++/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
++void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks)
++{
++ /* instant NMI */
++ bcma_cc_write32(cc, BCMA_CC_WATCHDOG, ticks);
++}
++
++void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value)
++{
++ bcma_cc_write32_masked(cc, BCMA_CC_IRQMASK, mask, value);
++}
++
++u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask)
++{
++ return bcma_cc_read32(cc, BCMA_CC_IRQSTAT) & mask;
++}
++
++u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask)
++{
++ return bcma_cc_read32(cc, BCMA_CC_GPIOIN) & mask;
++}
++
++u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value)
++{
++ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value);
++}
++
++u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
++{
++ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value);
++}
++
++u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value)
++{
++ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOCTL, mask, value);
++}
++EXPORT_SYMBOL_GPL(bcma_chipco_gpio_control);
++
++u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value)
++{
++ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value);
++}
++
++u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value)
++{
++ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
++}
+--- /dev/null
++++ b/drivers/bcma/driver_chipcommon_pmu.c
+@@ -0,0 +1,138 @@
++/*
++ * Broadcom specific AMBA
++ * ChipCommon Power Management Unit driver
++ *
++ * Copyright 2009, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2007, Broadcom Corporation
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "bcma_private.h"
++#include <linux/bcma/bcma.h>
++
++static void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc,
++ u32 offset, u32 mask, u32 set)
++{
++ u32 value;
++
++ bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR);
++ bcma_cc_write32(cc, BCMA_CC_CHIPCTL_ADDR, offset);
++ bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR);
++ value = bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA);
++ value &= mask;
++ value |= set;
++ bcma_cc_write32(cc, BCMA_CC_CHIPCTL_DATA, value);
++ bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA);
++}
++
++static void bcma_pmu_pll_init(struct bcma_drv_cc *cc)
++{
++ struct bcma_bus *bus = cc->core->bus;
++
++ switch (bus->chipinfo.id) {
++ case 0x4313:
++ case 0x4331:
++ case 43224:
++ case 43225:
++ break;
++ default:
++ pr_err("PLL init unknown for device 0x%04X\n",
++ bus->chipinfo.id);
++ }
++}
++
++static void bcma_pmu_resources_init(struct bcma_drv_cc *cc)
++{
++ struct bcma_bus *bus = cc->core->bus;
++ u32 min_msk = 0, max_msk = 0;
++
++ switch (bus->chipinfo.id) {
++ case 0x4313:
++ min_msk = 0x200D;
++ max_msk = 0xFFFF;
++ break;
++ case 43224:
++ case 43225:
++ break;
++ default:
++ pr_err("PMU resource config unknown for device 0x%04X\n",
++ bus->chipinfo.id);
++ }
++
++ /* Set the resource masks. */
++ if (min_msk)
++ bcma_cc_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk);
++ if (max_msk)
++ bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk);
++}
++
++void bcma_pmu_swreg_init(struct bcma_drv_cc *cc)
++{
++ struct bcma_bus *bus = cc->core->bus;
++
++ switch (bus->chipinfo.id) {
++ case 0x4313:
++ case 0x4331:
++ case 43224:
++ case 43225:
++ break;
++ default:
++ pr_err("PMU switch/regulators init unknown for device "
++ "0x%04X\n", bus->chipinfo.id);
++ }
++}
++
++void bcma_pmu_workarounds(struct bcma_drv_cc *cc)
++{
++ struct bcma_bus *bus = cc->core->bus;
++
++ switch (bus->chipinfo.id) {
++ case 0x4313:
++ bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7);
++ break;
++ case 0x4331:
++ pr_err("Enabling Ext PA lines not implemented\n");
++ break;
++ case 43224:
++ if (bus->chipinfo.rev == 0) {
++ pr_err("Workarounds for 43224 rev 0 not fully "
++ "implemented\n");
++ bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x00F000F0);
++ } else {
++ bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0);
++ }
++ break;
++ case 43225:
++ break;
++ default:
++ pr_err("Workarounds unknown for device 0x%04X\n",
++ bus->chipinfo.id);
++ }
++}
++
++void bcma_pmu_init(struct bcma_drv_cc *cc)
++{
++ u32 pmucap;
++
++ pmucap = bcma_cc_read32(cc, BCMA_CC_PMU_CAP);
++ cc->pmu.rev = (pmucap & BCMA_CC_PMU_CAP_REVISION);
++
++ pr_debug("Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev,
++ pmucap);
++
++ if (cc->pmu.rev == 1)
++ bcma_cc_mask32(cc, BCMA_CC_PMU_CTL,
++ ~BCMA_CC_PMU_CTL_NOILPONW);
++ else
++ bcma_cc_set32(cc, BCMA_CC_PMU_CTL,
++ BCMA_CC_PMU_CTL_NOILPONW);
++
++ if (cc->core->id.id == 0x4329 && cc->core->id.rev == 2)
++ pr_err("Fix for 4329b0 bad LPOM state not implemented!\n");
++
++ bcma_pmu_pll_init(cc);
++ bcma_pmu_resources_init(cc);
++ bcma_pmu_swreg_init(cc);
++ bcma_pmu_workarounds(cc);
++}
+--- /dev/null
++++ b/drivers/bcma/driver_pci.c
+@@ -0,0 +1,223 @@
++/*
++ * Broadcom specific AMBA
++ * PCI Core
++ *
++ * Copyright 2005, Broadcom Corporation
++ * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "bcma_private.h"
++#include <linux/bcma/bcma.h>
++
++/**************************************************
++ * R/W ops.
++ **************************************************/
++
++static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address)
++{
++ pcicore_write32(pc, 0x130, address);
++ pcicore_read32(pc, 0x130);
++ return pcicore_read32(pc, 0x134);
++}
++
++#if 0
++static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data)
++{
++ pcicore_write32(pc, 0x130, address);
++ pcicore_read32(pc, 0x130);
++ pcicore_write32(pc, 0x134, data);
++}
++#endif
++
++static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy)
++{
++ const u16 mdio_control = 0x128;
++ const u16 mdio_data = 0x12C;
++ u32 v;
++ int i;
++
++ v = (1 << 30); /* Start of Transaction */
++ v |= (1 << 28); /* Write Transaction */
++ v |= (1 << 17); /* Turnaround */
++ v |= (0x1F << 18);
++ v |= (phy << 4);
++ pcicore_write32(pc, mdio_data, v);
++
++ udelay(10);
++ for (i = 0; i < 200; i++) {
++ v = pcicore_read32(pc, mdio_control);
++ if (v & 0x100 /* Trans complete */)
++ break;
++ msleep(1);
++ }
++}
++
++static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address)
++{
++ const u16 mdio_control = 0x128;
++ const u16 mdio_data = 0x12C;
++ int max_retries = 10;
++ u16 ret = 0;
++ u32 v;
++ int i;
++
++ v = 0x80; /* Enable Preamble Sequence */
++ v |= 0x2; /* MDIO Clock Divisor */
++ pcicore_write32(pc, mdio_control, v);
++
++ if (pc->core->id.rev >= 10) {
++ max_retries = 200;
++ bcma_pcie_mdio_set_phy(pc, device);
++ }
++
++ v = (1 << 30); /* Start of Transaction */
++ v |= (1 << 29); /* Read Transaction */
++ v |= (1 << 17); /* Turnaround */
++ if (pc->core->id.rev < 10)
++ v |= (u32)device << 22;
++ v |= (u32)address << 18;
++ pcicore_write32(pc, mdio_data, v);
++ /* Wait for the device to complete the transaction */
++ udelay(10);
++ for (i = 0; i < max_retries; i++) {
++ v = pcicore_read32(pc, mdio_control);
++ if (v & 0x100 /* Trans complete */) {
++ udelay(10);
++ ret = pcicore_read32(pc, mdio_data);
++ break;
++ }
++ msleep(1);
++ }
++ pcicore_write32(pc, mdio_control, 0);
++ return ret;
++}
++
++static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device,
++ u8 address, u16 data)
++{
++ const u16 mdio_control = 0x128;
++ const u16 mdio_data = 0x12C;
++ int max_retries = 10;
++ u32 v;
++ int i;
++
++ v = 0x80; /* Enable Preamble Sequence */
++ v |= 0x2; /* MDIO Clock Divisor */
++ pcicore_write32(pc, mdio_control, v);
++
++ if (pc->core->id.rev >= 10) {
++ max_retries = 200;
++ bcma_pcie_mdio_set_phy(pc, device);
++ }
++
++ v = (1 << 30); /* Start of Transaction */
++ v |= (1 << 28); /* Write Transaction */
++ v |= (1 << 17); /* Turnaround */
++ if (pc->core->id.rev < 10)
++ v |= (u32)device << 22;
++ v |= (u32)address << 18;
++ v |= data;
++ pcicore_write32(pc, mdio_data, v);
++ /* Wait for the device to complete the transaction */
++ udelay(10);
++ for (i = 0; i < max_retries; i++) {
++ v = pcicore_read32(pc, mdio_control);
++ if (v & 0x100 /* Trans complete */)
++ break;
++ msleep(1);
++ }
++ pcicore_write32(pc, mdio_control, 0);
++}
++
++/**************************************************
++ * Workarounds.
++ **************************************************/
++
++static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc)
++{
++ return (bcma_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80;
++}
++
++static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc)
++{
++ const u8 serdes_pll_device = 0x1D;
++ const u8 serdes_rx_device = 0x1F;
++ u16 tmp;
++
++ bcma_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */,
++ bcma_pcicore_polarity_workaround(pc));
++ tmp = bcma_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */);
++ if (tmp & 0x4000)
++ bcma_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000);
++}
++
++/**************************************************
++ * Init.
++ **************************************************/
++
++static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc)
++{
++ bcma_pcicore_serdes_workaround(pc);
++}
++
++static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc)
++{
++ struct bcma_bus *bus = pc->core->bus;
++ u16 chipid_top;
++
++ chipid_top = (bus->chipinfo.id & 0xFF00);
++ if (chipid_top != 0x4700 &&
++ chipid_top != 0x5300)
++ return false;
++
++ if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI)
++ return false;
++
++#if 0
++ /* TODO: on BCMA we use address from EROM instead of magic formula */
++ u32 tmp;
++ return !mips_busprobe32(tmp, (bus->mmio +
++ (pc->core->core_index * BCMA_CORE_SIZE)));
++#endif
++
++ return true;
++}
++
++void bcma_core_pci_init(struct bcma_drv_pci *pc)
++{
++ if (bcma_core_pci_is_in_hostmode(pc)) {
++#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
++ bcma_core_pci_hostmode_init(pc);
++#else
++ pr_err("Driver compiled without support for hostmode PCI\n");
++#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
++ } else {
++ bcma_core_pci_clientmode_init(pc);
++ }
++}
++
++int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
++ bool enable)
++{
++ struct pci_dev *pdev = pc->core->bus->host_pci;
++ u32 coremask, tmp;
++ int err;
++
++ err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
++ if (err)
++ goto out;
++
++ coremask = BIT(core->core_index) << 8;
++ if (enable)
++ tmp |= coremask;
++ else
++ tmp &= ~coremask;
++
++ err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp);
++
++out:
++ return err;
++}
++EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl);
+--- /dev/null
++++ b/drivers/bcma/host_pci.c
+@@ -0,0 +1,251 @@
++/*
++ * Broadcom specific AMBA
++ * PCI Host
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "bcma_private.h"
++#include <linux/slab.h>
++#include <linux/bcma/bcma.h>
++#include <linux/pci.h>
++
++static void bcma_host_pci_switch_core(struct bcma_device *core)
++{
++ pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN,
++ core->addr);
++ pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN2,
++ core->wrap);
++ core->bus->mapped_core = core;
++ pr_debug("Switched to core: 0x%X\n", core->id.id);
++}
++
++static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset)
++{
++ if (core->bus->mapped_core != core)
++ bcma_host_pci_switch_core(core);
++ return ioread8(core->bus->mmio + offset);
++}
++
++static u16 bcma_host_pci_read16(struct bcma_device *core, u16 offset)
++{
++ if (core->bus->mapped_core != core)
++ bcma_host_pci_switch_core(core);
++ return ioread16(core->bus->mmio + offset);
++}
++
++static u32 bcma_host_pci_read32(struct bcma_device *core, u16 offset)
++{
++ if (core->bus->mapped_core != core)
++ bcma_host_pci_switch_core(core);
++ return ioread32(core->bus->mmio + offset);
++}
++
++static void bcma_host_pci_write8(struct bcma_device *core, u16 offset,
++ u8 value)
++{
++ if (core->bus->mapped_core != core)
++ bcma_host_pci_switch_core(core);
++ iowrite8(value, core->bus->mmio + offset);
++}
++
++static void bcma_host_pci_write16(struct bcma_device *core, u16 offset,
++ u16 value)
++{
++ if (core->bus->mapped_core != core)
++ bcma_host_pci_switch_core(core);
++ iowrite16(value, core->bus->mmio + offset);
++}
++
++static void bcma_host_pci_write32(struct bcma_device *core, u16 offset,
++ u32 value)
++{
++ if (core->bus->mapped_core != core)
++ bcma_host_pci_switch_core(core);
++ iowrite32(value, core->bus->mmio + offset);
++}
++
++#ifdef CONFIG_BCMA_BLOCKIO
++void bcma_host_pci_block_read(struct bcma_device *core, void *buffer,
++ size_t count, u16 offset, u8 reg_width)
++{
++ void __iomem *addr = core->bus->mmio + offset;
++ if (core->bus->mapped_core != core)
++ bcma_host_pci_switch_core(core);
++ switch (reg_width) {
++ case sizeof(u8):
++ ioread8_rep(addr, buffer, count);
++ break;
++ case sizeof(u16):
++ WARN_ON(count & 1);
++ ioread16_rep(addr, buffer, count >> 1);
++ break;
++ case sizeof(u32):
++ WARN_ON(count & 3);
++ ioread32_rep(addr, buffer, count >> 2);
++ break;
++ default:
++ WARN_ON(1);
++ }
++}
++
++void bcma_host_pci_block_write(struct bcma_device *core, const void *buffer,
++ size_t count, u16 offset, u8 reg_width)
++{
++ void __iomem *addr = core->bus->mmio + offset;
++ if (core->bus->mapped_core != core)
++ bcma_host_pci_switch_core(core);
++ switch (reg_width) {
++ case sizeof(u8):
++ iowrite8_rep(addr, buffer, count);
++ break;
++ case sizeof(u16):
++ WARN_ON(count & 1);
++ iowrite16_rep(addr, buffer, count >> 1);
++ break;
++ case sizeof(u32):
++ WARN_ON(count & 3);
++ iowrite32_rep(addr, buffer, count >> 2);
++ break;
++ default:
++ WARN_ON(1);
++ }
++}
++#endif
++
++static u32 bcma_host_pci_aread32(struct bcma_device *core, u16 offset)
++{
++ if (core->bus->mapped_core != core)
++ bcma_host_pci_switch_core(core);
++ return ioread32(core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset);
++}
++
++static void bcma_host_pci_awrite32(struct bcma_device *core, u16 offset,
++ u32 value)
++{
++ if (core->bus->mapped_core != core)
++ bcma_host_pci_switch_core(core);
++ iowrite32(value, core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset);
++}
++
++const struct bcma_host_ops bcma_host_pci_ops = {
++ .read8 = bcma_host_pci_read8,
++ .read16 = bcma_host_pci_read16,
++ .read32 = bcma_host_pci_read32,
++ .write8 = bcma_host_pci_write8,
++ .write16 = bcma_host_pci_write16,
++ .write32 = bcma_host_pci_write32,
++#ifdef CONFIG_BCMA_BLOCKIO
++ .block_read = bcma_host_pci_block_read,
++ .block_write = bcma_host_pci_block_write,
++#endif
++ .aread32 = bcma_host_pci_aread32,
++ .awrite32 = bcma_host_pci_awrite32,
++};
++
++static int bcma_host_pci_probe(struct pci_dev *dev,
++ const struct pci_device_id *id)
++{
++ struct bcma_bus *bus;
++ int err = -ENOMEM;
++ const char *name;
++ u32 val;
++
++ /* Alloc */
++ bus = kzalloc(sizeof(*bus), GFP_KERNEL);
++ if (!bus)
++ goto out;
++
++ /* Basic PCI configuration */
++ err = pci_enable_device(dev);
++ if (err)
++ goto err_kfree_bus;
++
++ name = dev_name(&dev->dev);
++ if (dev->driver && dev->driver->name)
++ name = dev->driver->name;
++ err = pci_request_regions(dev, name);
++ if (err)
++ goto err_pci_disable;
++ pci_set_master(dev);
++
++ /* Disable the RETRY_TIMEOUT register (0x41) to keep
++ * PCI Tx retries from interfering with C3 CPU state */
++ pci_read_config_dword(dev, 0x40, &val);
++ if ((val & 0x0000ff00) != 0)
++ pci_write_config_dword(dev, 0x40, val & 0xffff00ff);
++
++ /* SSB needed additional powering up, do we have any AMBA PCI cards? */
++ if (!dev->is_pcie)
++ pr_err("PCI card detected, report problems.\n");
++
++ /* Map MMIO */
++ err = -ENOMEM;
++ bus->mmio = pci_iomap(dev, 0, ~0UL);
++ if (!bus->mmio)
++ goto err_pci_release_regions;
++
++ /* Host specific */
++ bus->host_pci = dev;
++ bus->hosttype = BCMA_HOSTTYPE_PCI;
++ bus->ops = &bcma_host_pci_ops;
++
++ /* Register */
++ err = bcma_bus_register(bus);
++ if (err)
++ goto err_pci_unmap_mmio;
++
++ pci_set_drvdata(dev, bus);
++
++out:
++ return err;
++
++err_pci_unmap_mmio:
++ pci_iounmap(dev, bus->mmio);
++err_pci_release_regions:
++ pci_release_regions(dev);
++err_pci_disable:
++ pci_disable_device(dev);
++err_kfree_bus:
++ kfree(bus);
++ return err;
++}
++
++static void bcma_host_pci_remove(struct pci_dev *dev)
++{
++ struct bcma_bus *bus = pci_get_drvdata(dev);
++
++ bcma_bus_unregister(bus);
++ pci_iounmap(dev, bus->mmio);
++ pci_release_regions(dev);
++ pci_disable_device(dev);
++ kfree(bus);
++ pci_set_drvdata(dev, NULL);
++}
++
++static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = {
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
++ { 0, },
++};
++MODULE_DEVICE_TABLE(pci, bcma_pci_bridge_tbl);
++
++static struct pci_driver bcma_pci_bridge_driver = {
++ .name = "bcma-pci-bridge",
++ .id_table = bcma_pci_bridge_tbl,
++ .probe = bcma_host_pci_probe,
++ .remove = bcma_host_pci_remove,
++};
++
++int __init bcma_host_pci_init(void)
++{
++ return pci_register_driver(&bcma_pci_bridge_driver);
++}
++
++void __exit bcma_host_pci_exit(void)
++{
++ pci_unregister_driver(&bcma_pci_bridge_driver);
++}
+--- /dev/null
++++ b/drivers/bcma/main.c
+@@ -0,0 +1,257 @@
++/*
++ * Broadcom specific AMBA
++ * Bus subsystem
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "bcma_private.h"
++#include <linux/bcma/bcma.h>
++#include <linux/slab.h>
++
++MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
++MODULE_LICENSE("GPL");
++
++static int bcma_bus_match(struct device *dev, struct device_driver *drv);
++static int bcma_device_probe(struct device *dev);
++static int bcma_device_remove(struct device *dev);
++
++static ssize_t manuf_show(struct device *dev, struct device_attribute *attr, char *buf)
++{
++ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
++ return sprintf(buf, "0x%03X\n", core->id.manuf);
++}
++static ssize_t id_show(struct device *dev, struct device_attribute *attr, char *buf)
++{
++ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
++ return sprintf(buf, "0x%03X\n", core->id.id);
++}
++static ssize_t rev_show(struct device *dev, struct device_attribute *attr, char *buf)
++{
++ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
++ return sprintf(buf, "0x%02X\n", core->id.rev);
++}
++static ssize_t class_show(struct device *dev, struct device_attribute *attr, char *buf)
++{
++ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
++ return sprintf(buf, "0x%X\n", core->id.class);
++}
++static struct device_attribute bcma_device_attrs[] = {
++ __ATTR_RO(manuf),
++ __ATTR_RO(id),
++ __ATTR_RO(rev),
++ __ATTR_RO(class),
++ __ATTR_NULL,
++};
++
++static struct bus_type bcma_bus_type = {
++ .name = "bcma",
++ .match = bcma_bus_match,
++ .probe = bcma_device_probe,
++ .remove = bcma_device_remove,
++ .dev_attrs = bcma_device_attrs,
++};
++
++static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid)
++{
++ struct bcma_device *core;
++
++ list_for_each_entry(core, &bus->cores, list) {
++ if (core->id.id == coreid)
++ return core;
++ }
++ return NULL;
++}
++
++static void bcma_release_core_dev(struct device *dev)
++{
++ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
++ kfree(core);
++}
++
++static int bcma_register_cores(struct bcma_bus *bus)
++{
++ struct bcma_device *core;
++ int err, dev_id = 0;
++
++ list_for_each_entry(core, &bus->cores, list) {
++ /* We support that cores ourself */
++ switch (core->id.id) {
++ case BCMA_CORE_CHIPCOMMON:
++ case BCMA_CORE_PCI:
++ case BCMA_CORE_PCIE:
++ continue;
++ }
++
++ core->dev.release = bcma_release_core_dev;
++ core->dev.bus = &bcma_bus_type;
++ dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id);
++
++ switch (bus->hosttype) {
++ case BCMA_HOSTTYPE_PCI:
++ core->dev.parent = &bus->host_pci->dev;
++ core->dma_dev = &bus->host_pci->dev;
++ core->irq = bus->host_pci->irq;
++ break;
++ case BCMA_HOSTTYPE_NONE:
++ case BCMA_HOSTTYPE_SDIO:
++ break;
++ }
++
++ err = device_register(&core->dev);
++ if (err) {
++ pr_err("Could not register dev for core 0x%03X\n",
++ core->id.id);
++ continue;
++ }
++ core->dev_registered = true;
++ dev_id++;
++ }
++
++ return 0;
++}
++
++static void bcma_unregister_cores(struct bcma_bus *bus)
++{
++ struct bcma_device *core;
++
++ list_for_each_entry(core, &bus->cores, list) {
++ if (core->dev_registered)
++ device_unregister(&core->dev);
++ }
++}
++
++int bcma_bus_register(struct bcma_bus *bus)
++{
++ int err;
++ struct bcma_device *core;
++
++ /* Scan for devices (cores) */
++ err = bcma_bus_scan(bus);
++ if (err) {
++ pr_err("Failed to scan: %d\n", err);
++ return -1;
++ }
++
++ /* Init CC core */
++ core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON);
++ if (core) {
++ bus->drv_cc.core = core;
++ bcma_core_chipcommon_init(&bus->drv_cc);
++ }
++
++ /* Init PCIE core */
++ core = bcma_find_core(bus, BCMA_CORE_PCIE);
++ if (core) {
++ bus->drv_pci.core = core;
++ bcma_core_pci_init(&bus->drv_pci);
++ }
++
++ /* Try to get SPROM */
++ err = bcma_sprom_get(bus);
++ if (err == -ENOENT) {
++ pr_err("No SPROM available\n");
++ } else if (err) {
++ pr_err("Failed to get SPROM: %d\n", err);
++ return -ENOENT;
++ }
++
++ /* Register found cores */
++ bcma_register_cores(bus);
++
++ pr_info("Bus registered\n");
++
++ return 0;
++}
++
++void bcma_bus_unregister(struct bcma_bus *bus)
++{
++ bcma_unregister_cores(bus);
++}
++
++int __bcma_driver_register(struct bcma_driver *drv, struct module *owner)
++{
++ drv->drv.name = drv->name;
++ drv->drv.bus = &bcma_bus_type;
++ drv->drv.owner = owner;
++
++ return driver_register(&drv->drv);
++}
++EXPORT_SYMBOL_GPL(__bcma_driver_register);
++
++void bcma_driver_unregister(struct bcma_driver *drv)
++{
++ driver_unregister(&drv->drv);
++}
++EXPORT_SYMBOL_GPL(bcma_driver_unregister);
++
++static int bcma_bus_match(struct device *dev, struct device_driver *drv)
++{
++ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
++ struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv);
++ const struct bcma_device_id *cid = &core->id;
++ const struct bcma_device_id *did;
++
++ for (did = adrv->id_table; did->manuf || did->id || did->rev; did++) {
++ if ((did->manuf == cid->manuf || did->manuf == BCMA_ANY_MANUF) &&
++ (did->id == cid->id || did->id == BCMA_ANY_ID) &&
++ (did->rev == cid->rev || did->rev == BCMA_ANY_REV) &&
++ (did->class == cid->class || did->class == BCMA_ANY_CLASS))
++ return 1;
++ }
++ return 0;
++}
++
++static int bcma_device_probe(struct device *dev)
++{
++ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
++ struct bcma_driver *adrv = container_of(dev->driver, struct bcma_driver,
++ drv);
++ int err = 0;
++
++ if (adrv->probe)
++ err = adrv->probe(core);
++
++ return err;
++}
++
++static int bcma_device_remove(struct device *dev)
++{
++ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
++ struct bcma_driver *adrv = container_of(dev->driver, struct bcma_driver,
++ drv);
++
++ if (adrv->remove)
++ adrv->remove(core);
++
++ return 0;
++}
++
++static int __init bcma_modinit(void)
++{
++ int err;
++
++ err = bus_register(&bcma_bus_type);
++ if (err)
++ return err;
++
++#ifdef CONFIG_BCMA_HOST_PCI
++ err = bcma_host_pci_init();
++ if (err) {
++ pr_err("PCI host initialization failed\n");
++ err = 0;
++ }
++#endif
++
++ return err;
++}
++fs_initcall(bcma_modinit);
++
++static void __exit bcma_modexit(void)
++{
++#ifdef CONFIG_BCMA_HOST_PCI
++ bcma_host_pci_exit();
++#endif
++ bus_unregister(&bcma_bus_type);
++}
++module_exit(bcma_modexit)
+--- /dev/null
++++ b/drivers/bcma/scan.c
+@@ -0,0 +1,360 @@
++/*
++ * Broadcom specific AMBA
++ * Bus scanning
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "scan.h"
++#include "bcma_private.h"
++
++#include <linux/bcma/bcma.h>
++#include <linux/bcma/bcma_regs.h>
++#include <linux/pci.h>
++#include <linux/io.h>
++#include <linux/dma-mapping.h>
++#include <linux/slab.h>
++
++struct bcma_device_id_name {
++ u16 id;
++ const char *name;
++};
++struct bcma_device_id_name bcma_device_names[] = {
++ { BCMA_CORE_OOB_ROUTER, "OOB Router" },
++ { BCMA_CORE_INVALID, "Invalid" },
++ { BCMA_CORE_CHIPCOMMON, "ChipCommon" },
++ { BCMA_CORE_ILINE20, "ILine 20" },
++ { BCMA_CORE_SRAM, "SRAM" },
++ { BCMA_CORE_SDRAM, "SDRAM" },
++ { BCMA_CORE_PCI, "PCI" },
++ { BCMA_CORE_MIPS, "MIPS" },
++ { BCMA_CORE_ETHERNET, "Fast Ethernet" },
++ { BCMA_CORE_V90, "V90" },
++ { BCMA_CORE_USB11_HOSTDEV, "USB 1.1 Hostdev" },
++ { BCMA_CORE_ADSL, "ADSL" },
++ { BCMA_CORE_ILINE100, "ILine 100" },
++ { BCMA_CORE_IPSEC, "IPSEC" },
++ { BCMA_CORE_UTOPIA, "UTOPIA" },
++ { BCMA_CORE_PCMCIA, "PCMCIA" },
++ { BCMA_CORE_INTERNAL_MEM, "Internal Memory" },
++ { BCMA_CORE_MEMC_SDRAM, "MEMC SDRAM" },
++ { BCMA_CORE_OFDM, "OFDM" },
++ { BCMA_CORE_EXTIF, "EXTIF" },
++ { BCMA_CORE_80211, "IEEE 802.11" },
++ { BCMA_CORE_PHY_A, "PHY A" },
++ { BCMA_CORE_PHY_B, "PHY B" },
++ { BCMA_CORE_PHY_G, "PHY G" },
++ { BCMA_CORE_MIPS_3302, "MIPS 3302" },
++ { BCMA_CORE_USB11_HOST, "USB 1.1 Host" },
++ { BCMA_CORE_USB11_DEV, "USB 1.1 Device" },
++ { BCMA_CORE_USB20_HOST, "USB 2.0 Host" },
++ { BCMA_CORE_USB20_DEV, "USB 2.0 Device" },
++ { BCMA_CORE_SDIO_HOST, "SDIO Host" },
++ { BCMA_CORE_ROBOSWITCH, "Roboswitch" },
++ { BCMA_CORE_PARA_ATA, "PATA" },
++ { BCMA_CORE_SATA_XORDMA, "SATA XOR-DMA" },
++ { BCMA_CORE_ETHERNET_GBIT, "GBit Ethernet" },
++ { BCMA_CORE_PCIE, "PCIe" },
++ { BCMA_CORE_PHY_N, "PHY N" },
++ { BCMA_CORE_SRAM_CTL, "SRAM Controller" },
++ { BCMA_CORE_MINI_MACPHY, "Mini MACPHY" },
++ { BCMA_CORE_ARM_1176, "ARM 1176" },
++ { BCMA_CORE_ARM_7TDMI, "ARM 7TDMI" },
++ { BCMA_CORE_PHY_LP, "PHY LP" },
++ { BCMA_CORE_PMU, "PMU" },
++ { BCMA_CORE_PHY_SSN, "PHY SSN" },
++ { BCMA_CORE_SDIO_DEV, "SDIO Device" },
++ { BCMA_CORE_ARM_CM3, "ARM CM3" },
++ { BCMA_CORE_PHY_HT, "PHY HT" },
++ { BCMA_CORE_MIPS_74K, "MIPS 74K" },
++ { BCMA_CORE_MAC_GBIT, "GBit MAC" },
++ { BCMA_CORE_DDR12_MEM_CTL, "DDR1/DDR2 Memory Controller" },
++ { BCMA_CORE_PCIE_RC, "PCIe Root Complex" },
++ { BCMA_CORE_OCP_OCP_BRIDGE, "OCP to OCP Bridge" },
++ { BCMA_CORE_SHARED_COMMON, "Common Shared" },
++ { BCMA_CORE_OCP_AHB_BRIDGE, "OCP to AHB Bridge" },
++ { BCMA_CORE_SPI_HOST, "SPI Host" },
++ { BCMA_CORE_I2S, "I2S" },
++ { BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" },
++ { BCMA_CORE_SHIM, "SHIM" },
++ { BCMA_CORE_DEFAULT, "Default" },
++};
++const char *bcma_device_name(struct bcma_device_id *id)
++{
++ int i;
++
++ if (id->manuf == BCMA_MANUF_BCM) {
++ for (i = 0; i < ARRAY_SIZE(bcma_device_names); i++) {
++ if (bcma_device_names[i].id == id->id)
++ return bcma_device_names[i].name;
++ }
++ }
++ return "UNKNOWN";
++}
++
++static u32 bcma_scan_read32(struct bcma_bus *bus, u8 current_coreidx,
++ u16 offset)
++{
++ return readl(bus->mmio + offset);
++}
++
++static void bcma_scan_switch_core(struct bcma_bus *bus, u32 addr)
++{
++ if (bus->hosttype == BCMA_HOSTTYPE_PCI)
++ pci_write_config_dword(bus->host_pci, BCMA_PCI_BAR0_WIN,
++ addr);
++}
++
++static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 **eromptr)
++{
++ u32 ent = readl(*eromptr);
++ (*eromptr)++;
++ return ent;
++}
++
++static void bcma_erom_push_ent(u32 **eromptr)
++{
++ (*eromptr)--;
++}
++
++static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 **eromptr)
++{
++ u32 ent = bcma_erom_get_ent(bus, eromptr);
++ if (!(ent & SCAN_ER_VALID))
++ return -ENOENT;
++ if ((ent & SCAN_ER_TAG) != SCAN_ER_TAG_CI)
++ return -ENOENT;
++ return ent;
++}
++
++static bool bcma_erom_is_end(struct bcma_bus *bus, u32 **eromptr)
++{
++ u32 ent = bcma_erom_get_ent(bus, eromptr);
++ bcma_erom_push_ent(eromptr);
++ return (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID));
++}
++
++static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 **eromptr)
++{
++ u32 ent = bcma_erom_get_ent(bus, eromptr);
++ bcma_erom_push_ent(eromptr);
++ return (((ent & SCAN_ER_VALID)) &&
++ ((ent & SCAN_ER_TAGX) == SCAN_ER_TAG_ADDR) &&
++ ((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE));
++}
++
++static void bcma_erom_skip_component(struct bcma_bus *bus, u32 **eromptr)
++{
++ u32 ent;
++ while (1) {
++ ent = bcma_erom_get_ent(bus, eromptr);
++ if ((ent & SCAN_ER_VALID) &&
++ ((ent & SCAN_ER_TAG) == SCAN_ER_TAG_CI))
++ break;
++ if (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID))
++ break;
++ }
++ bcma_erom_push_ent(eromptr);
++}
++
++static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 **eromptr)
++{
++ u32 ent = bcma_erom_get_ent(bus, eromptr);
++ if (!(ent & SCAN_ER_VALID))
++ return -ENOENT;
++ if ((ent & SCAN_ER_TAG) != SCAN_ER_TAG_MP)
++ return -ENOENT;
++ return ent;
++}
++
++static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr,
++ u32 type, u8 port)
++{
++ u32 addrl, addrh, sizel, sizeh = 0;
++ u32 size;
++
++ u32 ent = bcma_erom_get_ent(bus, eromptr);
++ if ((!(ent & SCAN_ER_VALID)) ||
++ ((ent & SCAN_ER_TAGX) != SCAN_ER_TAG_ADDR) ||
++ ((ent & SCAN_ADDR_TYPE) != type) ||
++ (((ent & SCAN_ADDR_PORT) >> SCAN_ADDR_PORT_SHIFT) != port)) {
++ bcma_erom_push_ent(eromptr);
++ return -EINVAL;
++ }
++
++ addrl = ent & SCAN_ADDR_ADDR;
++ if (ent & SCAN_ADDR_AG32)
++ addrh = bcma_erom_get_ent(bus, eromptr);
++ else
++ addrh = 0;
++
++ if ((ent & SCAN_ADDR_SZ) == SCAN_ADDR_SZ_SZD) {
++ size = bcma_erom_get_ent(bus, eromptr);
++ sizel = size & SCAN_SIZE_SZ;
++ if (size & SCAN_SIZE_SG32)
++ sizeh = bcma_erom_get_ent(bus, eromptr);
++ } else
++ sizel = SCAN_ADDR_SZ_BASE <<
++ ((ent & SCAN_ADDR_SZ) >> SCAN_ADDR_SZ_SHIFT);
++
++ return addrl;
++}
++
++int bcma_bus_scan(struct bcma_bus *bus)
++{
++ u32 erombase;
++ u32 __iomem *eromptr, *eromend;
++
++ s32 cia, cib;
++ u8 ports[2], wrappers[2];
++
++ s32 tmp;
++ u8 i, j;
++
++ int err;
++
++ INIT_LIST_HEAD(&bus->cores);
++ bus->nr_cores = 0;
++
++ bcma_scan_switch_core(bus, BCMA_ADDR_BASE);
++
++ tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID);
++ bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT;
++ bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT;
++ bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT;
++
++ erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
++ eromptr = bus->mmio;
++ eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32);
++
++ bcma_scan_switch_core(bus, erombase);
++
++ while (eromptr < eromend) {
++ struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL);
++ if (!core)
++ return -ENOMEM;
++ INIT_LIST_HEAD(&core->list);
++ core->bus = bus;
++
++ /* get CIs */
++ cia = bcma_erom_get_ci(bus, &eromptr);
++ if (cia < 0) {
++ bcma_erom_push_ent(&eromptr);
++ if (bcma_erom_is_end(bus, &eromptr))
++ break;
++ err= -EILSEQ;
++ goto out;
++ }
++ cib = bcma_erom_get_ci(bus, &eromptr);
++ if (cib < 0) {
++ err= -EILSEQ;
++ goto out;
++ }
++
++ /* parse CIs */
++ core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT;
++ core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT;
++ core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT;
++ ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT;
++ ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT;
++ wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT;
++ wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT;
++ core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT;
++
++ if (((core->id.manuf == BCMA_MANUF_ARM) &&
++ (core->id.id == 0xFFF)) ||
++ (ports[1] == 0)) {
++ bcma_erom_skip_component(bus, &eromptr);
++ continue;
++ }
++
++ /* check if component is a core at all */
++ if (wrappers[0] + wrappers[1] == 0) {
++ /* we could save addrl of the router
++ if (cid == BCMA_CORE_OOB_ROUTER)
++ */
++ bcma_erom_skip_component(bus, &eromptr);
++ continue;
++ }
++
++ if (bcma_erom_is_bridge(bus, &eromptr)) {
++ bcma_erom_skip_component(bus, &eromptr);
++ continue;
++ }
++
++ /* get & parse master ports */
++ for (i = 0; i < ports[0]; i++) {
++ u32 mst_port_d = bcma_erom_get_mst_port(bus, &eromptr);
++ if (mst_port_d < 0) {
++ err= -EILSEQ;
++ goto out;
++ }
++ }
++
++ /* get & parse slave ports */
++ for (i = 0; i < ports[1]; i++) {
++ for (j = 0; ; j++) {
++ tmp = bcma_erom_get_addr_desc(bus, &eromptr,
++ SCAN_ADDR_TYPE_SLAVE, i);
++ if (tmp < 0) {
++ /* no more entries for port _i_ */
++ /* pr_debug("erom: slave port %d "
++ * "has %d descriptors\n", i, j); */
++ break;
++ } else {
++ if (i == 0 && j == 0)
++ core->addr = tmp;
++ }
++ }
++ }
++
++ /* get & parse master wrappers */
++ for (i = 0; i < wrappers[0]; i++) {
++ for (j = 0; ; j++) {
++ tmp = bcma_erom_get_addr_desc(bus, &eromptr,
++ SCAN_ADDR_TYPE_MWRAP, i);
++ if (tmp < 0) {
++ /* no more entries for port _i_ */
++ /* pr_debug("erom: master wrapper %d "
++ * "has %d descriptors\n", i, j); */
++ break;
++ } else {
++ if (i == 0 && j == 0)
++ core->wrap = tmp;
++ }
++ }
++ }
++
++ /* get & parse slave wrappers */
++ for (i = 0; i < wrappers[1]; i++) {
++ u8 hack = (ports[1] == 1) ? 0 : 1;
++ for (j = 0; ; j++) {
++ tmp = bcma_erom_get_addr_desc(bus, &eromptr,
++ SCAN_ADDR_TYPE_SWRAP, i + hack);
++ if (tmp < 0) {
++ /* no more entries for port _i_ */
++ /* pr_debug("erom: master wrapper %d "
++ * has %d descriptors\n", i, j); */
++ break;
++ } else {
++ if (wrappers[0] == 0 && !i && !j)
++ core->wrap = tmp;
++ }
++ }
++ }
++
++ pr_info("Core %d found: %s "
++ "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
++ bus->nr_cores, bcma_device_name(&core->id),
++ core->id.manuf, core->id.id, core->id.rev,
++ core->id.class);
++
++ core->core_index = bus->nr_cores++;
++ list_add(&core->list, &bus->cores);
++ continue;
++out:
++ return err;
++ }
++
++ return 0;
++}
+--- /dev/null
++++ b/drivers/bcma/scan.h
+@@ -0,0 +1,56 @@
++#ifndef BCMA_SCAN_H_
++#define BCMA_SCAN_H_
++
++#define BCMA_ADDR_BASE 0x18000000
++#define BCMA_WRAP_BASE 0x18100000
++
++#define SCAN_ER_VALID 0x00000001
++#define SCAN_ER_TAGX 0x00000006 /* we have to ignore 0x8 bit when checking tag for SCAN_ER_TAG_ADDR */
++#define SCAN_ER_TAG 0x0000000E
++#define SCAN_ER_TAG_CI 0x00000000
++#define SCAN_ER_TAG_MP 0x00000002
++#define SCAN_ER_TAG_ADDR 0x00000004
++#define SCAN_ER_TAG_END 0x0000000E
++#define SCAN_ER_BAD 0xFFFFFFFF
++
++#define SCAN_CIA_CLASS 0x000000F0
++#define SCAN_CIA_CLASS_SHIFT 4
++#define SCAN_CIA_ID 0x000FFF00
++#define SCAN_CIA_ID_SHIFT 8
++#define SCAN_CIA_MANUF 0xFFF00000
++#define SCAN_CIA_MANUF_SHIFT 20
++
++#define SCAN_CIB_NMP 0x000001F0
++#define SCAN_CIB_NMP_SHIFT 4
++#define SCAN_CIB_NSP 0x00003E00
++#define SCAN_CIB_NSP_SHIFT 9
++#define SCAN_CIB_NMW 0x0007C000
++#define SCAN_CIB_NMW_SHIFT 14
++#define SCAN_CIB_NSW 0x00F80000
++#define SCAN_CIB_NSW_SHIFT 17
++#define SCAN_CIB_REV 0xFF000000
++#define SCAN_CIB_REV_SHIFT 24
++
++#define SCAN_ADDR_AG32 0x00000008
++#define SCAN_ADDR_SZ 0x00000030
++#define SCAN_ADDR_SZ_SHIFT 4
++#define SCAN_ADDR_SZ_4K 0x00000000
++#define SCAN_ADDR_SZ_8K 0x00000010
++#define SCAN_ADDR_SZ_16K 0x00000020
++#define SCAN_ADDR_SZ_SZD 0x00000030
++#define SCAN_ADDR_TYPE 0x000000C0
++#define SCAN_ADDR_TYPE_SLAVE 0x00000000
++#define SCAN_ADDR_TYPE_BRIDGE 0x00000040
++#define SCAN_ADDR_TYPE_SWRAP 0x00000080
++#define SCAN_ADDR_TYPE_MWRAP 0x000000C0
++#define SCAN_ADDR_PORT 0x00000F00
++#define SCAN_ADDR_PORT_SHIFT 8
++#define SCAN_ADDR_ADDR 0xFFFFF000
++
++#define SCAN_ADDR_SZ_BASE 0x00001000 /* 4KB */
++
++#define SCAN_SIZE_SZ_ALIGN 0x00000FFF
++#define SCAN_SIZE_SZ 0xFFFFF000
++#define SCAN_SIZE_SG32 0x00000008
++
++#endif /* BCMA_SCAN_H_ */
+--- /dev/null
++++ b/include/linux/bcma/bcma.h
+@@ -0,0 +1,271 @@
++#ifndef LINUX_BCMA_H_
++#define LINUX_BCMA_H_
++
++#include <linux/pci.h>
++#include <linux/mod_devicetable.h>
++
++#include <linux/bcma/bcma_driver_chipcommon.h>
++#include <linux/bcma/bcma_driver_pci.h>
++#include <linux/ssb/ssb.h> /* SPROM sharing */
++
++#include "bcma_regs.h"
++
++struct bcma_device;
++struct bcma_bus;
++
++enum bcma_hosttype {
++ BCMA_HOSTTYPE_NONE,
++ BCMA_HOSTTYPE_PCI,
++ BCMA_HOSTTYPE_SDIO,
++};
++
++struct bcma_chipinfo {
++ u16 id;
++ u8 rev;
++ u8 pkg;
++};
++
++enum bcma_clkmode {
++ BCMA_CLKMODE_FAST,
++ BCMA_CLKMODE_DYNAMIC,
++};
++
++struct bcma_host_ops {
++ u8 (*read8)(struct bcma_device *core, u16 offset);
++ u16 (*read16)(struct bcma_device *core, u16 offset);
++ u32 (*read32)(struct bcma_device *core, u16 offset);
++ void (*write8)(struct bcma_device *core, u16 offset, u8 value);
++ void (*write16)(struct bcma_device *core, u16 offset, u16 value);
++ void (*write32)(struct bcma_device *core, u16 offset, u32 value);
++#ifdef CONFIG_BCMA_BLOCKIO
++ void (*block_read)(struct bcma_device *core, void *buffer,
++ size_t count, u16 offset, u8 reg_width);
++ void (*block_write)(struct bcma_device *core, const void *buffer,
++ size_t count, u16 offset, u8 reg_width);
++#endif
++ /* Agent ops */
++ u32 (*aread32)(struct bcma_device *core, u16 offset);
++ void (*awrite32)(struct bcma_device *core, u16 offset, u32 value);
++};
++
++/* Core manufacturers */
++#define BCMA_MANUF_ARM 0x43B
++#define BCMA_MANUF_MIPS 0x4A7
++#define BCMA_MANUF_BCM 0x4BF
++
++/* Core class values. */
++#define BCMA_CL_SIM 0x0
++#define BCMA_CL_EROM 0x1
++#define BCMA_CL_CORESIGHT 0x9
++#define BCMA_CL_VERIF 0xB
++#define BCMA_CL_OPTIMO 0xD
++#define BCMA_CL_GEN 0xE
++#define BCMA_CL_PRIMECELL 0xF
++
++/* Core-ID values. */
++#define BCMA_CORE_OOB_ROUTER 0x367 /* Out of band */
++#define BCMA_CORE_INVALID 0x700
++#define BCMA_CORE_CHIPCOMMON 0x800
++#define BCMA_CORE_ILINE20 0x801
++#define BCMA_CORE_SRAM 0x802
++#define BCMA_CORE_SDRAM 0x803
++#define BCMA_CORE_PCI 0x804
++#define BCMA_CORE_MIPS 0x805
++#define BCMA_CORE_ETHERNET 0x806
++#define BCMA_CORE_V90 0x807
++#define BCMA_CORE_USB11_HOSTDEV 0x808
++#define BCMA_CORE_ADSL 0x809
++#define BCMA_CORE_ILINE100 0x80A
++#define BCMA_CORE_IPSEC 0x80B
++#define BCMA_CORE_UTOPIA 0x80C
++#define BCMA_CORE_PCMCIA 0x80D
++#define BCMA_CORE_INTERNAL_MEM 0x80E
++#define BCMA_CORE_MEMC_SDRAM 0x80F
++#define BCMA_CORE_OFDM 0x810
++#define BCMA_CORE_EXTIF 0x811
++#define BCMA_CORE_80211 0x812
++#define BCMA_CORE_PHY_A 0x813
++#define BCMA_CORE_PHY_B 0x814
++#define BCMA_CORE_PHY_G 0x815
++#define BCMA_CORE_MIPS_3302 0x816
++#define BCMA_CORE_USB11_HOST 0x817
++#define BCMA_CORE_USB11_DEV 0x818
++#define BCMA_CORE_USB20_HOST 0x819
++#define BCMA_CORE_USB20_DEV 0x81A
++#define BCMA_CORE_SDIO_HOST 0x81B
++#define BCMA_CORE_ROBOSWITCH 0x81C
++#define BCMA_CORE_PARA_ATA 0x81D
++#define BCMA_CORE_SATA_XORDMA 0x81E
++#define BCMA_CORE_ETHERNET_GBIT 0x81F
++#define BCMA_CORE_PCIE 0x820
++#define BCMA_CORE_PHY_N 0x821
++#define BCMA_CORE_SRAM_CTL 0x822
++#define BCMA_CORE_MINI_MACPHY 0x823
++#define BCMA_CORE_ARM_1176 0x824
++#define BCMA_CORE_ARM_7TDMI 0x825
++#define BCMA_CORE_PHY_LP 0x826
++#define BCMA_CORE_PMU 0x827
++#define BCMA_CORE_PHY_SSN 0x828
++#define BCMA_CORE_SDIO_DEV 0x829
++#define BCMA_CORE_ARM_CM3 0x82A
++#define BCMA_CORE_PHY_HT 0x82B
++#define BCMA_CORE_MIPS_74K 0x82C
++#define BCMA_CORE_MAC_GBIT 0x82D
++#define BCMA_CORE_DDR12_MEM_CTL 0x82E
++#define BCMA_CORE_PCIE_RC 0x82F /* PCIe Root Complex */
++#define BCMA_CORE_OCP_OCP_BRIDGE 0x830
++#define BCMA_CORE_SHARED_COMMON 0x831
++#define BCMA_CORE_OCP_AHB_BRIDGE 0x832
++#define BCMA_CORE_SPI_HOST 0x833
++#define BCMA_CORE_I2S 0x834
++#define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */
++#define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */
++#define BCMA_CORE_DEFAULT 0xFFF
++
++#define BCMA_MAX_NR_CORES 16
++
++struct bcma_device {
++ struct bcma_bus *bus;
++ struct bcma_device_id id;
++
++ struct device dev;
++ struct device *dma_dev;
++ unsigned int irq;
++ bool dev_registered;
++
++ u8 core_index;
++
++ u32 addr;
++ u32 wrap;
++
++ void *drvdata;
++ struct list_head list;
++};
++
++static inline void *bcma_get_drvdata(struct bcma_device *core)
++{
++ return core->drvdata;
++}
++static inline void bcma_set_drvdata(struct bcma_device *core, void *drvdata)
++{
++ core->drvdata = drvdata;
++}
++
++struct bcma_driver {
++ const char *name;
++ const struct bcma_device_id *id_table;
++
++ int (*probe)(struct bcma_device *dev);
++ void (*remove)(struct bcma_device *dev);
++ int (*suspend)(struct bcma_device *dev, pm_message_t state);
++ int (*resume)(struct bcma_device *dev);
++ void (*shutdown)(struct bcma_device *dev);
++
++ struct device_driver drv;
++};
++extern
++int __bcma_driver_register(struct bcma_driver *drv, struct module *owner);
++static inline int bcma_driver_register(struct bcma_driver *drv)
++{
++ return __bcma_driver_register(drv, THIS_MODULE);
++}
++extern void bcma_driver_unregister(struct bcma_driver *drv);
++
++struct bcma_bus {
++ /* The MMIO area. */
++ void __iomem *mmio;
++
++ const struct bcma_host_ops *ops;
++
++ enum bcma_hosttype hosttype;
++ union {
++ /* Pointer to the PCI bus (only for BCMA_HOSTTYPE_PCI) */
++ struct pci_dev *host_pci;
++ /* Pointer to the SDIO device (only for BCMA_HOSTTYPE_SDIO) */
++ struct sdio_func *host_sdio;
++ };
++
++ struct bcma_chipinfo chipinfo;
++
++ struct bcma_device *mapped_core;
++ struct list_head cores;
++ u8 nr_cores;
++
++ struct bcma_drv_cc drv_cc;
++ struct bcma_drv_pci drv_pci;
++
++ /* We decided to share SPROM struct with SSB as long as we do not need
++ * any hacks for BCMA. This simplifies drivers code. */
++ struct ssb_sprom sprom;
++};
++
++extern inline u32 bcma_read8(struct bcma_device *core, u16 offset)
++{
++ return core->bus->ops->read8(core, offset);
++}
++extern inline u32 bcma_read16(struct bcma_device *core, u16 offset)
++{
++ return core->bus->ops->read16(core, offset);
++}
++extern inline u32 bcma_read32(struct bcma_device *core, u16 offset)
++{
++ return core->bus->ops->read32(core, offset);
++}
++extern inline
++void bcma_write8(struct bcma_device *core, u16 offset, u32 value)
++{
++ core->bus->ops->write8(core, offset, value);
++}
++extern inline
++void bcma_write16(struct bcma_device *core, u16 offset, u32 value)
++{
++ core->bus->ops->write16(core, offset, value);
++}
++extern inline
++void bcma_write32(struct bcma_device *core, u16 offset, u32 value)
++{
++ core->bus->ops->write32(core, offset, value);
++}
++#ifdef CONFIG_BCMA_BLOCKIO
++extern inline void bcma_block_read(struct bcma_device *core, void *buffer,
++ size_t count, u16 offset, u8 reg_width)
++{
++ core->bus->ops->block_read(core, buffer, count, offset, reg_width);
++}
++extern inline void bcma_block_write(struct bcma_device *core, const void *buffer,
++ size_t count, u16 offset, u8 reg_width)
++{
++ core->bus->ops->block_write(core, buffer, count, offset, reg_width);
++}
++#endif
++extern inline u32 bcma_aread32(struct bcma_device *core, u16 offset)
++{
++ return core->bus->ops->aread32(core, offset);
++}
++extern inline
++void bcma_awrite32(struct bcma_device *core, u16 offset, u32 value)
++{
++ core->bus->ops->awrite32(core, offset, value);
++}
++
++#define bcma_mask32(cc, offset, mask) \
++ bcma_write32(cc, offset, bcma_read32(cc, offset) & (mask))
++#define bcma_set32(cc, offset, set) \
++ bcma_write32(cc, offset, bcma_read32(cc, offset) | (set))
++#define bcma_maskset32(cc, offset, mask, set) \
++ bcma_write32(cc, offset, (bcma_read32(cc, offset) & (mask)) | (set))
++
++extern bool bcma_core_is_enabled(struct bcma_device *core);
++extern void bcma_core_disable(struct bcma_device *core, u32 flags);
++extern int bcma_core_enable(struct bcma_device *core, u32 flags);
++extern void bcma_core_set_clockmode(struct bcma_device *core,
++ enum bcma_clkmode clkmode);
++extern void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status,
++ bool on);
++#define BCMA_DMA_TRANSLATION_MASK 0xC0000000
++#define BCMA_DMA_TRANSLATION_NONE 0x00000000
++#define BCMA_DMA_TRANSLATION_DMA32_CMT 0x40000000 /* Client Mode Translation for 32-bit DMA */
++#define BCMA_DMA_TRANSLATION_DMA64_CMT 0x80000000 /* Client Mode Translation for 64-bit DMA */
++extern u32 bcma_core_dma_translation(struct bcma_device *core);
++
++#endif /* LINUX_BCMA_H_ */
+--- /dev/null
++++ b/include/linux/bcma/bcma_driver_chipcommon.h
+@@ -0,0 +1,296 @@
++#ifndef LINUX_BCMA_DRIVER_CC_H_
++#define LINUX_BCMA_DRIVER_CC_H_
++
++/** ChipCommon core registers. **/
++#define BCMA_CC_ID 0x0000
++#define BCMA_CC_ID_ID 0x0000FFFF
++#define BCMA_CC_ID_ID_SHIFT 0
++#define BCMA_CC_ID_REV 0x000F0000
++#define BCMA_CC_ID_REV_SHIFT 16
++#define BCMA_CC_ID_PKG 0x00F00000
++#define BCMA_CC_ID_PKG_SHIFT 20
++#define BCMA_CC_ID_NRCORES 0x0F000000
++#define BCMA_CC_ID_NRCORES_SHIFT 24
++#define BCMA_CC_ID_TYPE 0xF0000000
++#define BCMA_CC_ID_TYPE_SHIFT 28
++#define BCMA_CC_CAP 0x0004 /* Capabilities */
++#define BCMA_CC_CAP_NRUART 0x00000003 /* # of UARTs */
++#define BCMA_CC_CAP_MIPSEB 0x00000004 /* MIPS in BigEndian Mode */
++#define BCMA_CC_CAP_UARTCLK 0x00000018 /* UART clock select */
++#define BCMA_CC_CAP_UARTCLK_INT 0x00000008 /* UARTs are driven by internal divided clock */
++#define BCMA_CC_CAP_UARTGPIO 0x00000020 /* UARTs on GPIO 15-12 */
++#define BCMA_CC_CAP_EXTBUS 0x000000C0 /* External buses present */
++#define BCMA_CC_CAP_FLASHT 0x00000700 /* Flash Type */
++#define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */
++#define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */
++#define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */
++#define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */
++#define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */
++#define BCMA_PLLTYPE_NONE 0x00000000
++#define BCMA_PLLTYPE_1 0x00010000 /* 48Mhz base, 3 dividers */
++#define BCMA_PLLTYPE_2 0x00020000 /* 48Mhz, 4 dividers */
++#define BCMA_PLLTYPE_3 0x00030000 /* 25Mhz, 2 dividers */
++#define BCMA_PLLTYPE_4 0x00008000 /* 48Mhz, 4 dividers */
++#define BCMA_PLLTYPE_5 0x00018000 /* 25Mhz, 4 dividers */
++#define BCMA_PLLTYPE_6 0x00028000 /* 100/200 or 120/240 only */
++#define BCMA_PLLTYPE_7 0x00038000 /* 25Mhz, 4 dividers */
++#define BCMA_CC_CAP_PCTL 0x00040000 /* Power Control */
++#define BCMA_CC_CAP_OTPS 0x00380000 /* OTP size */
++#define BCMA_CC_CAP_OTPS_SHIFT 19
++#define BCMA_CC_CAP_OTPS_BASE 5
++#define BCMA_CC_CAP_JTAGM 0x00400000 /* JTAG master present */
++#define BCMA_CC_CAP_BROM 0x00800000 /* Internal boot ROM active */
++#define BCMA_CC_CAP_64BIT 0x08000000 /* 64-bit Backplane */
++#define BCMA_CC_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */
++#define BCMA_CC_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */
++#define BCMA_CC_CAP_SPROM 0x40000000 /* SPROM present */
++#define BCMA_CC_CORECTL 0x0008
++#define BCMA_CC_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */
++#define BCMA_CC_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
++#define BCMA_CC_CORECTL_UARTCLKEN 0x00000008 /* UART clock enable (rev >= 21) */
++#define BCMA_CC_BIST 0x000C
++#define BCMA_CC_OTPS 0x0010 /* OTP status */
++#define BCMA_CC_OTPS_PROGFAIL 0x80000000
++#define BCMA_CC_OTPS_PROTECT 0x00000007
++#define BCMA_CC_OTPS_HW_PROTECT 0x00000001
++#define BCMA_CC_OTPS_SW_PROTECT 0x00000002
++#define BCMA_CC_OTPS_CID_PROTECT 0x00000004
++#define BCMA_CC_OTPC 0x0014 /* OTP control */
++#define BCMA_CC_OTPC_RECWAIT 0xFF000000
++#define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00
++#define BCMA_CC_OTPC_PRW_SHIFT 8
++#define BCMA_CC_OTPC_MAXFAIL 0x00000038
++#define BCMA_CC_OTPC_VSEL 0x00000006
++#define BCMA_CC_OTPC_SELVL 0x00000001
++#define BCMA_CC_OTPP 0x0018 /* OTP prog */
++#define BCMA_CC_OTPP_COL 0x000000FF
++#define BCMA_CC_OTPP_ROW 0x0000FF00
++#define BCMA_CC_OTPP_ROW_SHIFT 8
++#define BCMA_CC_OTPP_READERR 0x10000000
++#define BCMA_CC_OTPP_VALUE 0x20000000
++#define BCMA_CC_OTPP_READ 0x40000000
++#define BCMA_CC_OTPP_START 0x80000000
++#define BCMA_CC_OTPP_BUSY 0x80000000
++#define BCMA_CC_IRQSTAT 0x0020
++#define BCMA_CC_IRQMASK 0x0024
++#define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */
++#define BCMA_CC_IRQ_EXT 0x00000002 /* ro: ext intr pin (corerev >= 3) */
++#define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */
++#define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */
++#define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */
++#define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */
++#define BCMA_CC_JCMD_START 0x80000000
++#define BCMA_CC_JCMD_BUSY 0x80000000
++#define BCMA_CC_JCMD_PAUSE 0x40000000
++#define BCMA_CC_JCMD0_ACC_MASK 0x0000F000
++#define BCMA_CC_JCMD0_ACC_IRDR 0x00000000
++#define BCMA_CC_JCMD0_ACC_DR 0x00001000
++#define BCMA_CC_JCMD0_ACC_IR 0x00002000
++#define BCMA_CC_JCMD0_ACC_RESET 0x00003000
++#define BCMA_CC_JCMD0_ACC_IRPDR 0x00004000
++#define BCMA_CC_JCMD0_ACC_PDR 0x00005000
++#define BCMA_CC_JCMD0_IRW_MASK 0x00000F00
++#define BCMA_CC_JCMD_ACC_MASK 0x000F0000 /* Changes for corerev 11 */
++#define BCMA_CC_JCMD_ACC_IRDR 0x00000000
++#define BCMA_CC_JCMD_ACC_DR 0x00010000
++#define BCMA_CC_JCMD_ACC_IR 0x00020000
++#define BCMA_CC_JCMD_ACC_RESET 0x00030000
++#define BCMA_CC_JCMD_ACC_IRPDR 0x00040000
++#define BCMA_CC_JCMD_ACC_PDR 0x00050000
++#define BCMA_CC_JCMD_IRW_MASK 0x00001F00
++#define BCMA_CC_JCMD_IRW_SHIFT 8
++#define BCMA_CC_JCMD_DRW_MASK 0x0000003F
++#define BCMA_CC_JIR 0x0034 /* Rev >= 10 only */
++#define BCMA_CC_JDR 0x0038 /* Rev >= 10 only */
++#define BCMA_CC_JCTL 0x003C /* Rev >= 10 only */
++#define BCMA_CC_JCTL_FORCE_CLK 4 /* Force clock */
++#define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */
++#define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */
++#define BCMA_CC_FLASHCTL 0x0040
++#define BCMA_CC_FLASHCTL_START 0x80000000
++#define BCMA_CC_FLASHCTL_BUSY BCMA_CC_FLASHCTL_START
++#define BCMA_CC_FLASHADDR 0x0044
++#define BCMA_CC_FLASHDATA 0x0048
++#define BCMA_CC_BCAST_ADDR 0x0050
++#define BCMA_CC_BCAST_DATA 0x0054
++#define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */
++#define BCMA_CC_GPIOPULLDOWN 0x005C /* Rev >= 20 only */
++#define BCMA_CC_GPIOIN 0x0060
++#define BCMA_CC_GPIOOUT 0x0064
++#define BCMA_CC_GPIOOUTEN 0x0068
++#define BCMA_CC_GPIOCTL 0x006C
++#define BCMA_CC_GPIOPOL 0x0070
++#define BCMA_CC_GPIOIRQ 0x0074
++#define BCMA_CC_WATCHDOG 0x0080
++#define BCMA_CC_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */
++#define BCMA_CC_GPIOTIMER_OFFTIME 0x0000FFFF
++#define BCMA_CC_GPIOTIMER_OFFTIME_SHIFT 0
++#define BCMA_CC_GPIOTIMER_ONTIME 0xFFFF0000
++#define BCMA_CC_GPIOTIMER_ONTIME_SHIFT 16
++#define BCMA_CC_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */
++#define BCMA_CC_CLOCK_N 0x0090
++#define BCMA_CC_CLOCK_SB 0x0094
++#define BCMA_CC_CLOCK_PCI 0x0098
++#define BCMA_CC_CLOCK_M2 0x009C
++#define BCMA_CC_CLOCK_MIPS 0x00A0
++#define BCMA_CC_CLKDIV 0x00A4 /* Rev >= 3 only */
++#define BCMA_CC_CLKDIV_SFLASH 0x0F000000
++#define BCMA_CC_CLKDIV_SFLASH_SHIFT 24
++#define BCMA_CC_CLKDIV_OTP 0x000F0000
++#define BCMA_CC_CLKDIV_OTP_SHIFT 16
++#define BCMA_CC_CLKDIV_JTAG 0x00000F00
++#define BCMA_CC_CLKDIV_JTAG_SHIFT 8
++#define BCMA_CC_CLKDIV_UART 0x000000FF
++#define BCMA_CC_CAP_EXT 0x00AC /* Capabilities */
++#define BCMA_CC_PLLONDELAY 0x00B0 /* Rev >= 4 only */
++#define BCMA_CC_FREFSELDELAY 0x00B4 /* Rev >= 4 only */
++#define BCMA_CC_SLOWCLKCTL 0x00B8 /* 6 <= Rev <= 9 only */
++#define BCMA_CC_SLOWCLKCTL_SRC 0x00000007 /* slow clock source mask */
++#define BCMA_CC_SLOWCLKCTL_SRC_LPO 0x00000000 /* source of slow clock is LPO */
++#define BCMA_CC_SLOWCLKCTL_SRC_XTAL 0x00000001 /* source of slow clock is crystal */
++#define BCMA_CC_SLOECLKCTL_SRC_PCI 0x00000002 /* source of slow clock is PCI */
++#define BCMA_CC_SLOWCLKCTL_LPOFREQ 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */
++#define BCMA_CC_SLOWCLKCTL_LPOPD 0x00000400 /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */
++#define BCMA_CC_SLOWCLKCTL_FSLOW 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */
++#define BCMA_CC_SLOWCLKCTL_IPLL 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */
++#define BCMA_CC_SLOWCLKCTL_ENXTAL 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */
++#define BCMA_CC_SLOWCLKCTL_XTALPU 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */
++#define BCMA_CC_SLOWCLKCTL_CLKDIV 0xFFFF0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */
++#define BCMA_CC_SLOWCLKCTL_CLKDIV_SHIFT 16
++#define BCMA_CC_SYSCLKCTL 0x00C0 /* Rev >= 3 only */
++#define BCMA_CC_SYSCLKCTL_IDLPEN 0x00000001 /* ILPen: Enable Idle Low Power */
++#define BCMA_CC_SYSCLKCTL_ALPEN 0x00000002 /* ALPen: Enable Active Low Power */
++#define BCMA_CC_SYSCLKCTL_PLLEN 0x00000004 /* ForcePLLOn */
++#define BCMA_CC_SYSCLKCTL_FORCEALP 0x00000008 /* Force ALP (or HT if ALPen is not set */
++#define BCMA_CC_SYSCLKCTL_FORCEHT 0x00000010 /* Force HT */
++#define BCMA_CC_SYSCLKCTL_CLKDIV 0xFFFF0000 /* ClkDiv (ILP = 1/(4+divisor)) */
++#define BCMA_CC_SYSCLKCTL_CLKDIV_SHIFT 16
++#define BCMA_CC_CLKSTSTR 0x00C4 /* Rev >= 3 only */
++#define BCMA_CC_EROM 0x00FC
++#define BCMA_CC_PCMCIA_CFG 0x0100
++#define BCMA_CC_PCMCIA_MEMWAIT 0x0104
++#define BCMA_CC_PCMCIA_ATTRWAIT 0x0108
++#define BCMA_CC_PCMCIA_IOWAIT 0x010C
++#define BCMA_CC_IDE_CFG 0x0110
++#define BCMA_CC_IDE_MEMWAIT 0x0114
++#define BCMA_CC_IDE_ATTRWAIT 0x0118
++#define BCMA_CC_IDE_IOWAIT 0x011C
++#define BCMA_CC_PROG_CFG 0x0120
++#define BCMA_CC_PROG_WAITCNT 0x0124
++#define BCMA_CC_FLASH_CFG 0x0128
++#define BCMA_CC_FLASH_WAITCNT 0x012C
++/* 0x1E0 is defined as shared BCMA_CLKCTLST */
++#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */
++#define BCMA_CC_UART0_DATA 0x0300
++#define BCMA_CC_UART0_IMR 0x0304
++#define BCMA_CC_UART0_FCR 0x0308
++#define BCMA_CC_UART0_LCR 0x030C
++#define BCMA_CC_UART0_MCR 0x0310
++#define BCMA_CC_UART0_LSR 0x0314
++#define BCMA_CC_UART0_MSR 0x0318
++#define BCMA_CC_UART0_SCRATCH 0x031C
++#define BCMA_CC_UART1_DATA 0x0400
++#define BCMA_CC_UART1_IMR 0x0404
++#define BCMA_CC_UART1_FCR 0x0408
++#define BCMA_CC_UART1_LCR 0x040C
++#define BCMA_CC_UART1_MCR 0x0410
++#define BCMA_CC_UART1_LSR 0x0414
++#define BCMA_CC_UART1_MSR 0x0418
++#define BCMA_CC_UART1_SCRATCH 0x041C
++/* PMU registers (rev >= 20) */
++#define BCMA_CC_PMU_CTL 0x0600 /* PMU control */
++#define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */
++#define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16
++#define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */
++#define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */
++#define BCMA_CC_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */
++#define BCMA_CC_PMU_CTL_XTALFREQ 0x0000007C /* Crystal freq */
++#define BCMA_CC_PMU_CTL_XTALFREQ_SHIFT 2
++#define BCMA_CC_PMU_CTL_ILPDIVEN 0x00000002 /* ILP div enable */
++#define BCMA_CC_PMU_CTL_LPOSEL 0x00000001 /* LPO sel */
++#define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */
++#define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */
++#define BCMA_CC_PMU_STAT 0x0608 /* PMU status */
++#define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */
++#define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */
++#define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */
++#define BCMA_CC_PMU_STAT_HAVEHT 0x00000004 /* HT available */
++#define BCMA_CC_PMU_STAT_RESINIT 0x00000003 /* Res init */
++#define BCMA_CC_PMU_RES_STAT 0x060C /* PMU res status */
++#define BCMA_CC_PMU_RES_PEND 0x0610 /* PMU res pending */
++#define BCMA_CC_PMU_TIMER 0x0614 /* PMU timer */
++#define BCMA_CC_PMU_MINRES_MSK 0x0618 /* PMU min res mask */
++#define BCMA_CC_PMU_MAXRES_MSK 0x061C /* PMU max res mask */
++#define BCMA_CC_PMU_RES_TABSEL 0x0620 /* PMU res table sel */
++#define BCMA_CC_PMU_RES_DEPMSK 0x0624 /* PMU res dep mask */
++#define BCMA_CC_PMU_RES_UPDNTM 0x0628 /* PMU res updown timer */
++#define BCMA_CC_PMU_RES_TIMER 0x062C /* PMU res timer */
++#define BCMA_CC_PMU_CLKSTRETCH 0x0630 /* PMU clockstretch */
++#define BCMA_CC_PMU_WATCHDOG 0x0634 /* PMU watchdog */
++#define BCMA_CC_PMU_RES_REQTS 0x0640 /* PMU res req timer sel */
++#define BCMA_CC_PMU_RES_REQT 0x0644 /* PMU res req timer */
++#define BCMA_CC_PMU_RES_REQM 0x0648 /* PMU res req mask */
++#define BCMA_CC_CHIPCTL_ADDR 0x0650
++#define BCMA_CC_CHIPCTL_DATA 0x0654
++#define BCMA_CC_REGCTL_ADDR 0x0658
++#define BCMA_CC_REGCTL_DATA 0x065C
++#define BCMA_CC_PLLCTL_ADDR 0x0660
++#define BCMA_CC_PLLCTL_DATA 0x0664
++#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */
++#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */
++
++/* Data for the PMU, if available.
++ * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
++ */
++struct bcma_chipcommon_pmu {
++ u8 rev; /* PMU revision */
++ u32 crystalfreq; /* The active crystal frequency (in kHz) */
++};
++
++struct bcma_drv_cc {
++ struct bcma_device *core;
++ u32 status;
++ u32 capabilities;
++ u32 capabilities_ext;
++ /* Fast Powerup Delay constant */
++ u16 fast_pwrup_delay;
++ struct bcma_chipcommon_pmu pmu;
++};
++
++/* Register access */
++#define bcma_cc_read32(cc, offset) \
++ bcma_read32((cc)->core, offset)
++#define bcma_cc_write32(cc, offset, val) \
++ bcma_write32((cc)->core, offset, val)
++
++#define bcma_cc_mask32(cc, offset, mask) \
++ bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) & (mask))
++#define bcma_cc_set32(cc, offset, set) \
++ bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) | (set))
++#define bcma_cc_maskset32(cc, offset, mask, set) \
++ bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
++
++extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
++
++extern void bcma_chipco_suspend(struct bcma_drv_cc *cc);
++extern void bcma_chipco_resume(struct bcma_drv_cc *cc);
++
++extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc,
++ u32 ticks);
++
++void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
++
++u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask);
++
++/* Chipcommon GPIO pin access. */
++u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask);
++u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value);
++u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value);
++u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value);
++u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value);
++u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);
++
++/* PMU support */
++extern void bcma_pmu_init(struct bcma_drv_cc *cc);
++
++#endif /* LINUX_BCMA_DRIVER_CC_H_ */
+--- /dev/null
++++ b/include/linux/bcma/bcma_driver_pci.h
+@@ -0,0 +1,91 @@
++#ifndef LINUX_BCMA_DRIVER_PCI_H_
++#define LINUX_BCMA_DRIVER_PCI_H_
++
++#include <linux/types.h>
++
++struct pci_dev;
++
++/** PCI core registers. **/
++#define BCMA_CORE_PCI_CTL 0x0000 /* PCI Control */
++#define BCMA_CORE_PCI_CTL_RST_OE 0x00000001 /* PCI_RESET Output Enable */
++#define BCMA_CORE_PCI_CTL_RST 0x00000002 /* PCI_RESET driven out to pin */
++#define BCMA_CORE_PCI_CTL_CLK_OE 0x00000004 /* Clock gate Output Enable */
++#define BCMA_CORE_PCI_CTL_CLK 0x00000008 /* Gate for clock driven out to pin */
++#define BCMA_CORE_PCI_ARBCTL 0x0010 /* PCI Arbiter Control */
++#define BCMA_CORE_PCI_ARBCTL_INTERN 0x00000001 /* Use internal arbiter */
++#define BCMA_CORE_PCI_ARBCTL_EXTERN 0x00000002 /* Use external arbiter */
++#define BCMA_CORE_PCI_ARBCTL_PARKID 0x00000006 /* Mask, selects which agent is parked on an idle bus */
++#define BCMA_CORE_PCI_ARBCTL_PARKID_LAST 0x00000000 /* Last requestor */
++#define BCMA_CORE_PCI_ARBCTL_PARKID_4710 0x00000002 /* 4710 */
++#define BCMA_CORE_PCI_ARBCTL_PARKID_EXT0 0x00000004 /* External requestor 0 */
++#define BCMA_CORE_PCI_ARBCTL_PARKID_EXT1 0x00000006 /* External requestor 1 */
++#define BCMA_CORE_PCI_ISTAT 0x0020 /* Interrupt status */
++#define BCMA_CORE_PCI_ISTAT_INTA 0x00000001 /* PCI INTA# */
++#define BCMA_CORE_PCI_ISTAT_INTB 0x00000002 /* PCI INTB# */
++#define BCMA_CORE_PCI_ISTAT_SERR 0x00000004 /* PCI SERR# (write to clear) */
++#define BCMA_CORE_PCI_ISTAT_PERR 0x00000008 /* PCI PERR# (write to clear) */
++#define BCMA_CORE_PCI_ISTAT_PME 0x00000010 /* PCI PME# */
++#define BCMA_CORE_PCI_IMASK 0x0024 /* Interrupt mask */
++#define BCMA_CORE_PCI_IMASK_INTA 0x00000001 /* PCI INTA# */
++#define BCMA_CORE_PCI_IMASK_INTB 0x00000002 /* PCI INTB# */
++#define BCMA_CORE_PCI_IMASK_SERR 0x00000004 /* PCI SERR# */
++#define BCMA_CORE_PCI_IMASK_PERR 0x00000008 /* PCI PERR# */
++#define BCMA_CORE_PCI_IMASK_PME 0x00000010 /* PCI PME# */
++#define BCMA_CORE_PCI_MBOX 0x0028 /* Backplane to PCI Mailbox */
++#define BCMA_CORE_PCI_MBOX_F0_0 0x00000100 /* PCI function 0, INT 0 */
++#define BCMA_CORE_PCI_MBOX_F0_1 0x00000200 /* PCI function 0, INT 1 */
++#define BCMA_CORE_PCI_MBOX_F1_0 0x00000400 /* PCI function 1, INT 0 */
++#define BCMA_CORE_PCI_MBOX_F1_1 0x00000800 /* PCI function 1, INT 1 */
++#define BCMA_CORE_PCI_MBOX_F2_0 0x00001000 /* PCI function 2, INT 0 */
++#define BCMA_CORE_PCI_MBOX_F2_1 0x00002000 /* PCI function 2, INT 1 */
++#define BCMA_CORE_PCI_MBOX_F3_0 0x00004000 /* PCI function 3, INT 0 */
++#define BCMA_CORE_PCI_MBOX_F3_1 0x00008000 /* PCI function 3, INT 1 */
++#define BCMA_CORE_PCI_BCAST_ADDR 0x0050 /* Backplane Broadcast Address */
++#define BCMA_CORE_PCI_BCAST_ADDR_MASK 0x000000FF
++#define BCMA_CORE_PCI_BCAST_DATA 0x0054 /* Backplane Broadcast Data */
++#define BCMA_CORE_PCI_GPIO_IN 0x0060 /* rev >= 2 only */
++#define BCMA_CORE_PCI_GPIO_OUT 0x0064 /* rev >= 2 only */
++#define BCMA_CORE_PCI_GPIO_ENABLE 0x0068 /* rev >= 2 only */
++#define BCMA_CORE_PCI_GPIO_CTL 0x006C /* rev >= 2 only */
++#define BCMA_CORE_PCI_SBTOPCI0 0x0100 /* Backplane to PCI translation 0 (sbtopci0) */
++#define BCMA_CORE_PCI_SBTOPCI0_MASK 0xFC000000
++#define BCMA_CORE_PCI_SBTOPCI1 0x0104 /* Backplane to PCI translation 1 (sbtopci1) */
++#define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000
++#define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */
++#define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000
++#define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */
++#define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */
++#define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */
++#define BCMA_CORE_PCI_PCICFG3 0x0700 /* PCI config space 3 (rev >= 8) */
++#define BCMA_CORE_PCI_SPROM(wordoffset) (0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */
++
++/* SBtoPCIx */
++#define BCMA_CORE_PCI_SBTOPCI_MEM 0x00000000
++#define BCMA_CORE_PCI_SBTOPCI_IO 0x00000001
++#define BCMA_CORE_PCI_SBTOPCI_CFG0 0x00000002
++#define BCMA_CORE_PCI_SBTOPCI_CFG1 0x00000003
++#define BCMA_CORE_PCI_SBTOPCI_PREF 0x00000004 /* Prefetch enable */
++#define BCMA_CORE_PCI_SBTOPCI_BURST 0x00000008 /* Burst enable */
++#define BCMA_CORE_PCI_SBTOPCI_MRM 0x00000020 /* Memory Read Multiple */
++#define BCMA_CORE_PCI_SBTOPCI_RC 0x00000030 /* Read Command mask (rev >= 11) */
++#define BCMA_CORE_PCI_SBTOPCI_RC_READ 0x00000000 /* Memory read */
++#define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */
++#define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */
++
++/* PCIcore specific boardflags */
++#define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */
++
++struct bcma_drv_pci {
++ struct bcma_device *core;
++ u8 setup_done:1;
++};
++
++/* Register access */
++#define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset)
++#define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val)
++
++extern void bcma_core_pci_init(struct bcma_drv_pci *pc);
++extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc,
++ struct bcma_device *core, bool enable);
++
++#endif /* LINUX_BCMA_DRIVER_PCI_H_ */
+--- /dev/null
++++ b/include/linux/bcma/bcma_regs.h
+@@ -0,0 +1,59 @@
++#ifndef LINUX_BCMA_REGS_H_
++#define LINUX_BCMA_REGS_H_
++
++/* Some single registers are shared between many cores */
++/* BCMA_CLKCTLST: ChipCommon (rev >= 20), PCIe, 80211 */
++#define BCMA_CLKCTLST 0x01E0 /* Clock control and status */
++#define BCMA_CLKCTLST_FORCEALP 0x00000001 /* Force ALP request */
++#define BCMA_CLKCTLST_FORCEHT 0x00000002 /* Force HT request */
++#define BCMA_CLKCTLST_FORCEILP 0x00000004 /* Force ILP request */
++#define BCMA_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */
++#define BCMA_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */
++#define BCMA_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */
++#define BCMA_CLKCTLST_EXTRESREQ 0x00000700 /* Mask of external resource requests */
++#define BCMA_CLKCTLST_HAVEALP 0x00010000 /* ALP available */
++#define BCMA_CLKCTLST_HAVEHT 0x00020000 /* HT available */
++#define BCMA_CLKCTLST_BP_ON_ALP 0x00040000 /* RO: running on ALP clock */
++#define BCMA_CLKCTLST_BP_ON_HT 0x00080000 /* RO: running on HT clock */
++#define BCMA_CLKCTLST_EXTRESST 0x07000000 /* Mask of external resource status */
++/* Is there any BCM4328 on BCMA bus? */
++#define BCMA_CLKCTLST_4328A0_HAVEHT 0x00010000 /* 4328a0 has reversed bits */
++#define BCMA_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */
++
++/* Agent registers (common for every core) */
++#define BCMA_IOCTL 0x0408 /* IO control */
++#define BCMA_IOCTL_CLK 0x0001
++#define BCMA_IOCTL_FGC 0x0002
++#define BCMA_IOCTL_CORE_BITS 0x3FFC
++#define BCMA_IOCTL_PME_EN 0x4000
++#define BCMA_IOCTL_BIST_EN 0x8000
++#define BCMA_IOST 0x0500 /* IO status */
++#define BCMA_IOST_CORE_BITS 0x0FFF
++#define BCMA_IOST_DMA64 0x1000
++#define BCMA_IOST_GATED_CLK 0x2000
++#define BCMA_IOST_BIST_ERROR 0x4000
++#define BCMA_IOST_BIST_DONE 0x8000
++#define BCMA_RESET_CTL 0x0800
++#define BCMA_RESET_CTL_RESET 0x0001
++
++/* BCMA PCI config space registers. */
++#define BCMA_PCI_PMCSR 0x44
++#define BCMA_PCI_PE 0x100
++#define BCMA_PCI_BAR0_WIN 0x80 /* Backplane address space 0 */
++#define BCMA_PCI_BAR1_WIN 0x84 /* Backplane address space 1 */
++#define BCMA_PCI_SPROMCTL 0x88 /* SPROM control */
++#define BCMA_PCI_SPROMCTL_WE 0x10 /* SPROM write enable */
++#define BCMA_PCI_BAR1_CONTROL 0x8c /* Address space 1 burst control */
++#define BCMA_PCI_IRQS 0x90 /* PCI interrupts */
++#define BCMA_PCI_IRQMASK 0x94 /* PCI IRQ control and mask (pcirev >= 6 only) */
++#define BCMA_PCI_BACKPLANE_IRQS 0x98 /* Backplane Interrupts */
++#define BCMA_PCI_BAR0_WIN2 0xAC
++#define BCMA_PCI_GPIO_IN 0xB0 /* GPIO Input (pcirev >= 3 only) */
++#define BCMA_PCI_GPIO_OUT 0xB4 /* GPIO Output (pcirev >= 3 only) */
++#define BCMA_PCI_GPIO_OUT_ENABLE 0xB8 /* GPIO Output Enable/Disable (pcirev >= 3 only) */
++#define BCMA_PCI_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */
++#define BCMA_PCI_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */
++#define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */
++#define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */
++
++#endif /* LINUX_BCMA_REGS_H_ */
+--- a/include/linux/mod_devicetable.h
++++ b/include/linux/mod_devicetable.h
+@@ -382,6 +382,23 @@ struct ssb_device_id {
+ #define SSB_ANY_ID 0xFFFF
+ #define SSB_ANY_REV 0xFF
+
++/* Broadcom's specific AMBA core, see drivers/bcma/ */
++struct bcma_device_id {
++ __u16 manuf;
++ __u16 id;
++ __u8 rev;
++ __u8 class;
++};
++#define BCMA_CORE(_manuf, _id, _rev, _class) \
++ { .manuf = _manuf, .id = _id, .rev = _rev, .class = _class, }
++#define BCMA_CORETABLE_END \
++ { 0, },
++
++#define BCMA_ANY_MANUF 0xFFFF
++#define BCMA_ANY_ID 0xFFFF
++#define BCMA_ANY_REV 0xFF
++#define BCMA_ANY_CLASS 0xFF
++
+ struct virtio_device_id {
+ __u32 device;
+ __u32 vendor;
+--- a/scripts/mod/file2alias.c
++++ b/scripts/mod/file2alias.c
+@@ -633,6 +633,24 @@ static int do_ssb_entry(const char *file
+ return 1;
+ }
+
++/* Looks like: bcma:mNidNrevNclN. */
++static int do_bcma_entry(const char *filename,
++ struct bcma_device_id *id, char *alias)
++{
++ id->manuf = TO_NATIVE(id->manuf);
++ id->id = TO_NATIVE(id->id);
++ id->rev = TO_NATIVE(id->rev);
++ id->class = TO_NATIVE(id->class);
++
++ strcpy(alias, "bcma:");
++ ADD(alias, "m", id->manuf != BCMA_ANY_MANUF, id->manuf);
++ ADD(alias, "id", id->id != BCMA_ANY_ID, id->id);
++ ADD(alias, "rev", id->rev != BCMA_ANY_REV, id->rev);
++ ADD(alias, "cl", id->class != BCMA_ANY_CLASS, id->class);
++ add_wildcard(alias);
++ return 1;
++}
++
+ /* Looks like: virtio:dNvN */
+ static int do_virtio_entry(const char *filename, struct virtio_device_id *id,
+ char *alias)
+@@ -845,6 +863,10 @@ void handle_moddevtable(struct module *m
+ do_table(symval, sym->st_size,
+ sizeof(struct ssb_device_id), "ssb",
+ do_ssb_entry, mod);
++ else if (sym_is(symname, "__mod_bcma_device_table"))
++ do_table(symval, sym->st_size,
++ sizeof(struct bcma_device_id), "bcma",
++ do_bcma_entry, mod);
+ else if (sym_is(symname, "__mod_virtio_device_table"))
+ do_table(symval, sym->st_size,
+ sizeof(struct virtio_device_id), "virtio",
+--- /dev/null
++++ b/drivers/bcma/sprom.c
+@@ -0,0 +1,171 @@
++/*
++ * Broadcom specific AMBA
++ * SPROM reading
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "bcma_private.h"
++
++#include <linux/bcma/bcma.h>
++#include <linux/bcma/bcma_regs.h>
++#include <linux/pci.h>
++#include <linux/io.h>
++#include <linux/dma-mapping.h>
++#include <linux/slab.h>
++
++#define SPOFF(offset) ((offset) / sizeof(u16))
++
++/**************************************************
++ * R/W ops.
++ **************************************************/
++
++static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom)
++{
++ int i;
++ for (i = 0; i < SSB_SPROMSIZE_WORDS_R4; i++)
++ sprom[i] = bcma_read16(bus->drv_cc.core,
++ offset + (i * 2));
++}
++
++/**************************************************
++ * Validation.
++ **************************************************/
++
++static inline u8 bcma_crc8(u8 crc, u8 data)
++{
++ /* Polynomial: x^8 + x^7 + x^6 + x^4 + x^2 + 1 */
++ static const u8 t[] = {
++ 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B,
++ 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21,
++ 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF,
++ 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5,
++ 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14,
++ 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E,
++ 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80,
++ 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA,
++ 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95,
++ 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF,
++ 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01,
++ 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B,
++ 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA,
++ 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0,
++ 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E,
++ 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34,
++ 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0,
++ 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A,
++ 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54,
++ 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E,
++ 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF,
++ 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5,
++ 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B,
++ 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61,
++ 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E,
++ 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74,
++ 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA,
++ 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0,
++ 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41,
++ 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B,
++ 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5,
++ 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F,
++ };
++ return t[crc ^ data];
++}
++
++static u8 bcma_sprom_crc(const u16 *sprom)
++{
++ int word;
++ u8 crc = 0xFF;
++
++ for (word = 0; word < SSB_SPROMSIZE_WORDS_R4 - 1; word++) {
++ crc = bcma_crc8(crc, sprom[word] & 0x00FF);
++ crc = bcma_crc8(crc, (sprom[word] & 0xFF00) >> 8);
++ }
++ crc = bcma_crc8(crc, sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & 0x00FF);
++ crc ^= 0xFF;
++
++ return crc;
++}
++
++static int bcma_sprom_check_crc(const u16 *sprom)
++{
++ u8 crc;
++ u8 expected_crc;
++ u16 tmp;
++
++ crc = bcma_sprom_crc(sprom);
++ tmp = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_CRC;
++ expected_crc = tmp >> SSB_SPROM_REVISION_CRC_SHIFT;
++ if (crc != expected_crc)
++ return -EPROTO;
++
++ return 0;
++}
++
++static int bcma_sprom_valid(const u16 *sprom)
++{
++ u16 revision;
++ int err;
++
++ err = bcma_sprom_check_crc(sprom);
++ if (err)
++ return err;
++
++ revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_REV;
++ if (revision != 8 && revision != 9) {
++ pr_err("Unsupported SPROM revision: %d\n", revision);
++ return -ENOENT;
++ }
++
++ return 0;
++}
++
++/**************************************************
++ * SPROM extraction.
++ **************************************************/
++
++static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom)
++{
++ u16 v;
++ int i;
++
++ for (i = 0; i < 3; i++) {
++ v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i];
++ *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v);
++ }
++}
++
++int bcma_sprom_get(struct bcma_bus *bus)
++{
++ u16 offset;
++ u16 *sprom;
++ int err = 0;
++
++ if (!bus->drv_cc.core)
++ return -EOPNOTSUPP;
++
++ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM))
++ return -ENOENT;
++
++ sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
++ GFP_KERNEL);
++ if (!sprom)
++ return -ENOMEM;
++
++ /* Most cards have SPROM moved by additional offset 0x30 (48 dwords).
++ * According to brcm80211 this applies to cards with PCIe rev >= 6
++ * TODO: understand this condition and use it */
++ offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM :
++ BCMA_CC_SPROM_PCIE6;
++ bcma_sprom_read(bus, offset, sprom);
++
++ err = bcma_sprom_valid(sprom);
++ if (err)
++ goto out;
++
++ bcma_sprom_extract_r8(bus, sprom);
++
++out:
++ kfree(sprom);
++ return err;
++}
+--- /dev/null
++++ b/drivers/bcma/driver_pci_host.c
+@@ -0,0 +1,14 @@
++/*
++ * Broadcom specific AMBA
++ * PCI Core in hostmode
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "bcma_private.h"
++#include <linux/bcma/bcma.h>
++
++void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc)
++{
++ pr_err("No support for PCI core in hostmode yet\n");
++}