diff options
Diffstat (limited to 'target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2')
7 files changed, 4452 insertions, 0 deletions
diff --git a/target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIf.c b/target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIf.c new file mode 100644 index 000000000..a214c95cd --- /dev/null +++ b/target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIf.c @@ -0,0 +1,1855 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +/* includes */ +#include "ddr2/mvDramIf.h" +#include "ctrlEnv/sys/mvCpuIf.h" + +#include "ddr2/mvDramIfStaticInit.h" + +/* #define MV_DEBUG */ +#ifdef MV_DEBUG +#define DB(x) x +#else +#define DB(x) +#endif + +/* DRAM bank presence encoding */ +#define BANK_PRESENT_CS0 0x1 +#define BANK_PRESENT_CS0_CS1 0x3 +#define BANK_PRESENT_CS0_CS2 0x5 +#define BANK_PRESENT_CS0_CS1_CS2 0x7 +#define BANK_PRESENT_CS0_CS2_CS3 0xd +#define BANK_PRESENT_CS0_CS2_CS3_CS4 0xf + +/* locals */ +#ifndef MV_STATIC_DRAM_ON_BOARD +static void sdramDDr2OdtConfig(MV_DRAM_BANK_INFO *pBankInfo); +static MV_U32 dunitCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 minCas, MV_U32 busClk, MV_STATUS TTmode ); +static MV_U32 dunitCtrlHighRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk); +static MV_U32 sdramModeRegCalc(MV_U32 minCas); +static MV_U32 sdramExtModeRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk); +static MV_U32 sdramAddrCtrlRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_DRAM_BANK_INFO *pBankInfoDIMM1); +static MV_U32 sdramConfigRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_DRAM_BANK_INFO *pBankInfo2, MV_U32 busClk); +static MV_U32 minCasCalc(MV_DRAM_BANK_INFO *pBankInfo,MV_DRAM_BANK_INFO *pBankInfo2, MV_U32 busClk, MV_U32 forcedCl); +static MV_U32 sdramTimeCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 minCas, MV_U32 busClk); +static MV_U32 sdramTimeCtrlHighRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk); +static MV_U32 sdramDdr2TimeLoRegCalc(MV_U32 minCas); +static MV_U32 sdramDdr2TimeHiRegCalc(MV_U32 minCas); +#endif +MV_32 DRAM_CS_Order[MV_DRAM_MAX_CS] = {N_A + +#ifdef MV_INCLUDE_SDRAM_CS1 + ,N_A +#endif +#ifdef MV_INCLUDE_SDRAM_CS2 + ,N_A +#endif +#ifdef MV_INCLUDE_SDRAM_CS3 + ,N_A +#endif + }; +/* Get DRAM size of CS num */ +MV_U32 mvDramCsSizeGet(MV_U32 csNum) +{ + MV_DRAM_BANK_INFO bankInfo; + MV_U32 size, deviceW, dimmW; +#ifdef MV78XX0 + MV_U32 temp; +#endif + + if(MV_OK == mvDramBankInfoGet(csNum, &bankInfo)) + { + if (0 == bankInfo.size) + return 0; + + /* Note that the Dimm width might be different then the device DRAM width */ +#ifdef MV78XX0 + temp = MV_REG_READ(SDRAM_CONFIG_REG); + deviceW = ((temp & SDRAM_DWIDTH_MASK) == SDRAM_DWIDTH_32BIT )? 32 : 64; +#else + deviceW = 16 /* KW family */; +#endif + dimmW = bankInfo.dataWidth - (bankInfo.dataWidth % 16); + size = ((bankInfo.size << 20) / (dimmW/deviceW)); + return size; + } + else + return 0; +} +/******************************************************************************* +* mvDramIfDetect - Prepare DRAM interface configuration values. +* +* DESCRIPTION: +* This function implements the full DRAM detection and timing +* configuration for best system performance. +* Since this routine runs from a ROM device (Boot Flash), its stack +* resides on RAM, that might be the system DRAM. Changing DRAM +* configuration values while keeping vital data in DRAM is risky. That +* is why the function does not preform the configuration setting but +* prepare those in predefined 32bit registers (in this case IDMA +* registers are used) for other routine to perform the settings. +* The function will call for board DRAM SPD information for each DRAM +* chip select. The function will then analyze those SPD parameters of +* all DRAM banks in order to decide on DRAM configuration compatible +* for all DRAM banks. +* The function will set the CPU DRAM address decode registers. +* Note: This routine prepares values that will overide configuration of +* mvDramBasicAsmInit(). +* +* INPUT: +* forcedCl - Forced CAL Latency. If equal to zero, do not force. +* eccDisable - Force down the ECC. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +MV_STATUS mvDramIfDetect(MV_U32 forcedCl, MV_BOOL eccDisable) +{ + MV_32 MV_DRAM_CS_order[MV_DRAM_MAX_CS] = { + SDRAM_CS0 +#ifdef MV_INCLUDE_SDRAM_CS1 + ,SDRAM_CS1 +#endif +#ifdef MV_INCLUDE_SDRAM_CS2 + ,SDRAM_CS2 +#endif +#ifdef MV_INCLUDE_SDRAM_CS3 + ,SDRAM_CS3 +#endif + }; + MV_U32 busClk, deviceW, dimmW; + MV_U32 numOfAllDevices = 0; + MV_STATUS TTMode; +#ifndef MV_STATIC_DRAM_ON_BOARD + MV_DRAM_BANK_INFO bankInfo[MV_DRAM_MAX_CS]; + MV_U32 size, base = 0, i, j, temp, busClkPs; + MV_U8 minCas; + MV_CPU_DEC_WIN dramDecWin; + dramDecWin.addrWin.baseHigh = 0; +#endif + + busClk = mvBoardSysClkGet(); + + if (0 == busClk) + { + mvOsPrintf("Dram: ERR. Can't detect system clock! \n"); + return MV_ERROR; + } + +#ifndef MV_STATIC_DRAM_ON_BOARD + + busClkPs = 1000000000 / (busClk / 1000); /* in ps units */ + /* we will use bank 0 as the representative of the all the DRAM banks, */ + /* since bank 0 must exist. */ + for(i = 0; i < MV_DRAM_MAX_CS; i++) + { + /* if Bank exist */ + if(MV_OK == mvDramBankInfoGet(i, &bankInfo[i])) + { + DB(mvOsPrintf("Dram: Find bank %d\n", i)); + /* check it isn't SDRAM */ + if(bankInfo[i].memoryType != MEM_TYPE_DDR2) + { + mvOsOutput("Dram: ERR. SDRAM type not supported !!!\n"); + return MV_ERROR; + } + + /* All banks must support the Mclk freqency */ + if(bankInfo[i].minCycleTimeAtMaxCasLatPs > busClkPs) + { + mvOsOutput("Dram: ERR. Bank %d doesn't support memory clock!!!\n", i); + return MV_ERROR; + } + + /* All banks must support registry in order to activate it */ + if(bankInfo[i].registeredAddrAndControlInputs != + bankInfo[0].registeredAddrAndControlInputs) + { + mvOsOutput("Dram: ERR. different Registered settings !!!\n"); + return MV_ERROR; + } + + /* All banks must support same ECC mode */ + if(bankInfo[i].errorCheckType != + bankInfo[0].errorCheckType) + { + mvOsOutput("Dram: ERR. different ECC settings !!!\n"); + return MV_ERROR; + } + + } + else + { + if( i == 0 ) /* bank 0 doesn't exist */ + { + mvOsOutput("Dram: ERR. Fail to detect bank 0 !!!\n"); + return MV_ERROR; + } + else + { + DB(mvOsPrintf("Dram: Could not find bank %d\n", i)); + bankInfo[i].size = 0; /* Mark this bank as non exist */ + } + } + } + +#ifdef MV_INCLUDE_SDRAM_CS2 + if (bankInfo[SDRAM_CS0].size < bankInfo[SDRAM_CS2].size) + { + MV_DRAM_CS_order[0] = SDRAM_CS2; + MV_DRAM_CS_order[1] = SDRAM_CS3; + MV_DRAM_CS_order[2] = SDRAM_CS0; + MV_DRAM_CS_order[3] = SDRAM_CS1; + DRAM_CS_Order[0] = SDRAM_CS2; + DRAM_CS_Order[1] = SDRAM_CS3; + DRAM_CS_Order[2] = SDRAM_CS0; + DRAM_CS_Order[3] = SDRAM_CS1; + + } + else +#endif + { + MV_DRAM_CS_order[0] = SDRAM_CS0; + MV_DRAM_CS_order[1] = SDRAM_CS1; + DRAM_CS_Order[0] = SDRAM_CS0; + DRAM_CS_Order[1] = SDRAM_CS1; +#ifdef MV_INCLUDE_SDRAM_CS2 + MV_DRAM_CS_order[2] = SDRAM_CS2; + MV_DRAM_CS_order[3] = SDRAM_CS3; + DRAM_CS_Order[2] = SDRAM_CS2; + DRAM_CS_Order[3] = SDRAM_CS3; +#endif + } + + for(j = 0; j < MV_DRAM_MAX_CS; j++) + { + i = MV_DRAM_CS_order[j]; + + if (0 == bankInfo[i].size) + continue; + + /* Init the CPU window decode */ + /* Note that the Dimm width might be different then the device DRAM width */ +#ifdef MV78XX0 + temp = MV_REG_READ(SDRAM_CONFIG_REG); + deviceW = ((temp & SDRAM_DWIDTH_MASK) == SDRAM_DWIDTH_32BIT )? 32 : 64; +#else + deviceW = 16 /* KW family */; +#endif + dimmW = bankInfo[0].dataWidth - (bankInfo[0].dataWidth % 16); + size = ((bankInfo[i].size << 20) / (dimmW/deviceW)); + + /* We can not change DRAM window settings while excecuting */ + /* code from it. That is why we skip the DRAM CS[0], saving */ + /* it to the ROM configuration routine */ + + numOfAllDevices += bankInfo[i].numberOfDevices; + if (i == MV_DRAM_CS_order[0]) + { + MV_U32 sizeToReg; + /* Translate the given window size to register format */ + sizeToReg = ctrlSizeToReg(size, SCSR_SIZE_ALIGNMENT); + /* Size parameter validity check. */ + if (-1 == sizeToReg) + { + mvOsOutput("DRAM: mvCtrlAddrDecToReg: ERR. Win %d size invalid.\n" + ,i); + return MV_BAD_PARAM; + } + + DB(mvOsPrintf("Dram: Bank 0 Size - %x\n",sizeToReg);) + sizeToReg = (sizeToReg << SCSR_SIZE_OFFS); + sizeToReg |= SCSR_WIN_EN; + MV_REG_WRITE(DRAM_BUF_REG0, sizeToReg); + } + else + { + dramDecWin.addrWin.baseLow = base; + dramDecWin.addrWin.size = size; + dramDecWin.enable = MV_TRUE; + DB(mvOsPrintf("Dram: Enable window %d base 0x%x, size=0x%x\n",i, base, size)); + + /* Check if the DRAM size is more then 3GByte */ + if (base < 0xC0000000) + { + DB(mvOsPrintf("Dram: Enable window %d base 0x%x, size=0x%x\n",i, base, size)); + if (MV_OK != mvCpuIfTargetWinSet(i, &dramDecWin)) + { + mvOsPrintf("Dram: ERR. Fail to set bank %d!!!\n", SDRAM_CS0 + i); + return MV_ERROR; + } + } + } + + base += size; + + /* update the suportedCasLatencies mask */ + bankInfo[0].suportedCasLatencies &= bankInfo[i].suportedCasLatencies; + } + + /* calculate minimum CAS */ + minCas = minCasCalc(&bankInfo[0], &bankInfo[2], busClk, forcedCl); + if (0 == minCas) + { + mvOsOutput("Dram: Warn: Could not find CAS compatible to SysClk %dMhz\n", + (busClk / 1000000)); + + minCas = DDR2_CL_4; /* Continue with this CAS */ + mvOsOutput("Set default CAS latency 4\n"); + } + + /* calc SDRAM_CONFIG_REG and save it to temp register */ + temp = sdramConfigRegCalc(&bankInfo[0],&bankInfo[2], busClk); + if(-1 == temp) + { + mvOsOutput("Dram: ERR. sdramConfigRegCalc failed !!!\n"); + return MV_ERROR; + } + + /* check if ECC is enabled by the user */ + if(eccDisable) + { + /* turn off ECC*/ + temp &= ~BIT18; + } + DB(mvOsPrintf("Dram: sdramConfigRegCalc - %x\n",temp);) + MV_REG_WRITE(DRAM_BUF_REG1, temp); + + /* calc SDRAM_MODE_REG and save it to temp register */ + temp = sdramModeRegCalc(minCas); + if(-1 == temp) + { + mvOsOutput("Dram: ERR. sdramModeRegCalc failed !!!\n"); + return MV_ERROR; + } + DB(mvOsPrintf("Dram: sdramModeRegCalc - %x\n",temp);) + MV_REG_WRITE(DRAM_BUF_REG2, temp); + + /* calc SDRAM_EXTENDED_MODE_REG and save it to temp register */ + temp = sdramExtModeRegCalc(&bankInfo[0], busClk); + if(-1 == temp) + { + mvOsOutput("Dram: ERR. sdramExtModeRegCalc failed !!!\n"); + return MV_ERROR; + } + DB(mvOsPrintf("Dram: sdramExtModeRegCalc - %x\n",temp);) + MV_REG_WRITE(DRAM_BUF_REG10, temp); + + /* calc D_UNIT_CONTROL_LOW and save it to temp register */ + TTMode = MV_FALSE; + DB(mvOsPrintf("Dram: numOfAllDevices = %x\n",numOfAllDevices);) + if( (numOfAllDevices > 9) && (bankInfo[0].registeredAddrAndControlInputs == MV_FALSE) ) + { + if ( ( (numOfAllDevices > 9) && (busClk > MV_BOARD_SYSCLK_200MHZ) ) || + (numOfAllDevices > 18) ) + { + mvOsOutput("Enable 2T "); + TTMode = MV_TRUE; + } + } + + temp = dunitCtrlLowRegCalc(&bankInfo[0], minCas, busClk, TTMode ); + if(-1 == temp) + { + mvOsOutput("Dram: ERR. dunitCtrlLowRegCalc failed !!!\n"); + return MV_ERROR; + } + DB(mvOsPrintf("Dram: dunitCtrlLowRegCalc - %x\n",temp);) + MV_REG_WRITE(DRAM_BUF_REG3, temp); + + /* calc D_UNIT_CONTROL_HIGH and save it to temp register */ + temp = dunitCtrlHighRegCalc(&bankInfo[0], busClk); + if(-1 == temp) + { + mvOsOutput("Dram: ERR. dunitCtrlHighRegCalc failed !!!\n"); + return MV_ERROR; + } + DB(mvOsPrintf("Dram: dunitCtrlHighRegCalc - %x\n",temp);) + /* check if ECC is enabled by the user */ + if(eccDisable) + { + /* turn off sample stage if no ecc */ + temp &= ~SDRAM__D2P_EN;; + } + MV_REG_WRITE(DRAM_BUF_REG13, temp); + + /* calc SDRAM_ADDR_CTRL_REG and save it to temp register */ + temp = sdramAddrCtrlRegCalc(&bankInfo[0],&bankInfo[2]); + if(-1 == temp) + { + mvOsOutput("Dram: ERR. sdramAddrCtrlRegCalc failed !!!\n"); + return MV_ERROR; + } + DB(mvOsPrintf("Dram: sdramAddrCtrlRegCalc - %x\n",temp);) + MV_REG_WRITE(DRAM_BUF_REG4, temp); + + /* calc SDRAM_TIMING_CTRL_LOW_REG and save it to temp register */ + temp = sdramTimeCtrlLowRegCalc(&bankInfo[0], minCas, busClk); + if(-1 == temp) + { + mvOsOutput("Dram: ERR. sdramTimeCtrlLowRegCalc failed !!!\n"); + return MV_ERROR; + } + DB(mvOsPrintf("Dram: sdramTimeCtrlLowRegCalc - %x\n",temp);) + MV_REG_WRITE(DRAM_BUF_REG5, temp); + + /* calc SDRAM_TIMING_CTRL_HIGH_REG and save it to temp register */ + temp = sdramTimeCtrlHighRegCalc(&bankInfo[0], busClk); + if(-1 == temp) + { + mvOsOutput("Dram: ERR. sdramTimeCtrlHighRegCalc failed !!!\n"); + return MV_ERROR; + } + DB(mvOsPrintf("Dram: sdramTimeCtrlHighRegCalc - %x\n",temp);) + MV_REG_WRITE(DRAM_BUF_REG6, temp); + + sdramDDr2OdtConfig(bankInfo); + + /* calc DDR2_SDRAM_TIMING_LOW_REG and save it to temp register */ + temp = sdramDdr2TimeLoRegCalc(minCas); + if(-1 == temp) + { + mvOsOutput("Dram: ERR. sdramDdr2TimeLoRegCalc failed !!!\n"); + return MV_ERROR; + } + DB(mvOsPrintf("Dram: sdramDdr2TimeLoRegCalc - %x\n",temp);) + MV_REG_WRITE(DRAM_BUF_REG11, temp); + + /* calc DDR2_SDRAM_TIMING_HIGH_REG and save it to temp register */ + temp = sdramDdr2TimeHiRegCalc(minCas); + if(-1 == temp) + { + mvOsOutput("Dram: ERR. sdramDdr2TimeHiRegCalc failed !!!\n"); + return MV_ERROR; + } + DB(mvOsPrintf("Dram: sdramDdr2TimeHiRegCalc - %x\n",temp);) + MV_REG_WRITE(DRAM_BUF_REG12, temp); +#endif + + /* Note that DDR SDRAM Address/Control and Data pad calibration */ + /* settings is done in mvSdramIfConfig.s */ + + return MV_OK; +} + + +/******************************************************************************* +* mvDramIfBankBaseGet - Get DRAM interface bank base. +* +* DESCRIPTION: +* This function returns the 32 bit base address of a given DRAM bank. +* +* INPUT: +* bankNum - Bank number. +* +* OUTPUT: +* None. +* +* RETURN: +* DRAM bank size. If bank is disabled or paramter is invalid, the +* function returns -1. +* +*******************************************************************************/ +MV_U32 mvDramIfBankBaseGet(MV_U32 bankNum) +{ + DB(mvOsPrintf("Dram: mvDramIfBankBaseGet Bank %d base addr is %x \n", + bankNum, mvCpuIfTargetWinBaseLowGet(SDRAM_CS0 + bankNum))); + return mvCpuIfTargetWinBaseLowGet(SDRAM_CS0 + bankNum); +} + +/******************************************************************************* +* mvDramIfBankSizeGet - Get DRAM interface bank size. +* +* DESCRIPTION: +* This function returns the size of a given DRAM bank. +* +* INPUT: +* bankNum - Bank number. +* +* OUTPUT: +* None. +* +* RETURN: +* DRAM bank size. If bank is disabled the function return '0'. In case +* or paramter is invalid, the function returns -1. +* +*******************************************************************************/ +MV_U32 mvDramIfBankSizeGet(MV_U32 bankNum) +{ + DB(mvOsPrintf("Dram: mvDramIfBankSizeGet Bank %d size is %x \n", + bankNum, mvCpuIfTargetWinSizeGet(SDRAM_CS0 + bankNum))); + return mvCpuIfTargetWinSizeGet(SDRAM_CS0 + bankNum); +} + + +/******************************************************************************* +* mvDramIfSizeGet - Get DRAM interface total size. +* +* DESCRIPTION: +* This function get the DRAM total size. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* DRAM total size. In case or paramter is invalid, the function +* returns -1. +* +*******************************************************************************/ +MV_U32 mvDramIfSizeGet(MV_VOID) +{ + MV_U32 size = 0, i; + + for(i = 0; i < MV_DRAM_MAX_CS; i++) + size += mvDramIfBankSizeGet(i); + + DB(mvOsPrintf("Dram: mvDramIfSizeGet size is %x \n",size)); + return size; +} + +/******************************************************************************* +* mvDramIfSingleBitErrThresholdSet - Set single bit ECC threshold. +* +* DESCRIPTION: +* The ECC single bit error threshold is the number of single bit +* errors to happen before the Dunit generates an interrupt. +* This function set single bit ECC threshold. +* +* INPUT: +* threshold - threshold. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM if threshold is to big, MV_OK otherwise. +* +*******************************************************************************/ +MV_STATUS mvDramIfSingleBitErrThresholdSet(MV_U32 threshold) +{ + MV_U32 regVal; + + if (threshold > SECR_THRECC_MAX) + { + return MV_BAD_PARAM; + } + + regVal = MV_REG_READ(SDRAM_ECC_CONTROL_REG); + regVal &= ~SECR_THRECC_MASK; + regVal |= ((SECR_THRECC(threshold) & SECR_THRECC_MASK)); + MV_REG_WRITE(SDRAM_ECC_CONTROL_REG, regVal); + + return MV_OK; +} + +#ifndef MV_STATIC_DRAM_ON_BOARD +/******************************************************************************* +* minCasCalc - Calculate the Minimum CAS latency which can be used. +* +* DESCRIPTION: +* Calculate the minimum CAS latency that can be used, base on the DRAM +* parameters and the SDRAM bus Clock freq. +* +* INPUT: +* busClk - the DRAM bus Clock. +* pBankInfo - bank info parameters. +* forcedCl - Forced CAS Latency multiplied by 10. If equal to zero, do not force. +* +* OUTPUT: +* None +* +* RETURN: +* The minimum CAS Latency. The function returns 0 if max CAS latency +* supported by banks is incompatible with system bus clock frequancy. +* +*******************************************************************************/ + +static MV_U32 minCasCalc(MV_DRAM_BANK_INFO *pBankInfo,MV_DRAM_BANK_INFO *pBankInfo2, MV_U32 busClk, MV_U32 forcedCl) +{ + MV_U32 count = 1, j; + MV_U32 busClkPs = 1000000000 / (busClk / 1000); /* in ps units */ + MV_U32 startBit, stopBit; + MV_U32 minCas0 = 0, minCas2 = 0; + + + /* DDR 2: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + CAS = * TBD | TBD | 5 | 4 | 3 | 2 | TBD | TBD * + Disco VI= * TBD | TBD | 5 | 4 | 3 | TBD | TBD | TBD * + Disco Duo= * TBD | 6 | 5 | 4 | 3 | TBD | TBD | TBD * + *********************************************************/ + + + /* If we are asked to use the forced CAL we change the suported CAL to be forcedCl only */ + if (forcedCl) + { + mvOsOutput("DRAM: Using forced CL %d.%d\n", (forcedCl / 10), (forcedCl % 10)); + + if (forcedCl == 30) + pBankInfo->suportedCasLatencies = 0x08; + else if (forcedCl == 40) + pBankInfo->suportedCasLatencies = 0x10; + else if (forcedCl == 50) + pBankInfo->suportedCasLatencies = 0x20; + else if (forcedCl == 60) + pBankInfo->suportedCasLatencies = 0x40; + else + { + mvOsPrintf("Forced CL %d.%d not supported. Set default CL 4\n", + (forcedCl / 10), (forcedCl % 10)); + pBankInfo->suportedCasLatencies = 0x10; + } + + return pBankInfo->suportedCasLatencies; + } + + /* go over the supported cas mask from Max Cas down and check if the */ + /* SysClk stands in its time requirments. */ + + DB(mvOsPrintf("Dram: minCasCalc supported mask = %x busClkPs = %x \n", + pBankInfo->suportedCasLatencies,busClkPs )); + count = 1; + for(j = 7; j > 0; j--) + { + if((pBankInfo->suportedCasLatencies >> j) & BIT0 ) + { + /* Reset the bits for CL incompatible for the sysClk */ + switch (count) + { + case 1: + if (pBankInfo->minCycleTimeAtMaxCasLatPs > busClkPs) + pBankInfo->suportedCasLatencies &= ~(BIT0 << j); + count++; + break; + case 2: + if (pBankInfo->minCycleTimeAtMaxCasLatMinus1Ps > busClkPs) + pBankInfo->suportedCasLatencies &= ~(BIT0 << j); + count++; + break; + case 3: + if (pBankInfo->minCycleTimeAtMaxCasLatMinus2Ps > busClkPs) + pBankInfo->suportedCasLatencies &= ~(BIT0 << j); + count++; + break; + default: + pBankInfo->suportedCasLatencies &= ~(BIT0 << j); + break; + } + } + } + + DB(mvOsPrintf("Dram: minCasCalc support = %x (after SysCC calc)\n", + pBankInfo->suportedCasLatencies )); + + count = 1; + DB(mvOsPrintf("Dram2: minCasCalc supported mask = %x busClkPs = %x \n", + pBankInfo2->suportedCasLatencies,busClkPs )); + for(j = 7; j > 0; j--) + { + if((pBankInfo2->suportedCasLatencies >> j) & BIT0 ) + { + /* Reset the bits for CL incompatible for the sysClk */ + switch (count) + { + case 1: + if (pBankInfo2->minCycleTimeAtMaxCasLatPs > busClkPs) + pBankInfo2->suportedCasLatencies &= ~(BIT0 << j); + count++; + break; + case 2: + if (pBankInfo2->minCycleTimeAtMaxCasLatMinus1Ps > busClkPs) + pBankInfo2->suportedCasLatencies &= ~(BIT0 << j); + count++; + break; + case 3: + if (pBankInfo2->minCycleTimeAtMaxCasLatMinus2Ps > busClkPs) + pBankInfo2->suportedCasLatencies &= ~(BIT0 << j); + count++; + break; + default: + pBankInfo2->suportedCasLatencies &= ~(BIT0 << j); + break; + } + } + } + + DB(mvOsPrintf("Dram2: minCasCalc support = %x (after SysCC calc)\n", + pBankInfo2->suportedCasLatencies )); + + startBit = 3; /* DDR2 support CL start with CL3 (bit 3) */ + stopBit = 6; /* DDR2 support CL stops with CL6 (bit 6) */ + + for(j = startBit; j <= stopBit ; j++) + { + if((pBankInfo->suportedCasLatencies >> j) & BIT0 ) + { + DB(mvOsPrintf("Dram: minCasCalc choose CAS %x \n",(BIT0 << j))); + minCas0 = (BIT0 << j); + break; + } + } + + for(j = startBit; j <= stopBit ; j++) + { + if((pBankInfo2->suportedCasLatencies >> j) & BIT0 ) + { + DB(mvOsPrintf("Dram: minCasCalc choose CAS %x \n",(BIT0 << j))); + minCas2 = (BIT0 << j); + break; + } + } + + if (minCas2 > minCas0) + return minCas2; + else + return minCas0; + + return 0; +} + +/******************************************************************************* +* sdramConfigRegCalc - Calculate sdram config register +* +* DESCRIPTION: Calculate sdram config register optimized value based +* on the bank info parameters. +* +* INPUT: +* busClk - the DRAM bus Clock. +* pBankInfo - sdram bank parameters +* +* OUTPUT: +* None +* +* RETURN: +* sdram config reg value. +* +*******************************************************************************/ +static MV_U32 sdramConfigRegCalc(MV_DRAM_BANK_INFO *pBankInfo,MV_DRAM_BANK_INFO *pBankInfo2, MV_U32 busClk) +{ + MV_U32 sdramConfig = 0; + MV_U32 refreshPeriod; + + busClk /= 1000000; /* we work with busClk in MHz */ + + sdramConfig = MV_REG_READ(SDRAM_CONFIG_REG); + + /* figure out the memory refresh internal */ + switch (pBankInfo->refreshInterval & 0xf) + { + case 0x0: /* refresh period is 15.625 usec */ + refreshPeriod = 15625; + break; + case 0x1: /* refresh period is 3.9 usec */ + refreshPeriod = 3900; + break; + case 0x2: /* refresh period is 7.8 usec */ + refreshPeriod = 7800; + break; + case 0x3: /* refresh period is 31.3 usec */ + refreshPeriod = 31300; + break; + case 0x4: /* refresh period is 62.5 usec */ + refreshPeriod = 62500; + break; + case 0x5: /* refresh period is 125 usec */ + refreshPeriod = 125000; + break; + default: /* refresh period undefined */ + mvOsPrintf("Dram: ERR. DRAM refresh period is unknown!\n"); + return -1; + } + + /* Now the refreshPeriod is in register format value */ + refreshPeriod = (busClk * refreshPeriod) / 1000; + + DB(mvOsPrintf("Dram: sdramConfigRegCalc calculated refresh interval %0x\n", + refreshPeriod)); + + /* make sure the refresh value is only 14 bits */ + if(refreshPeriod > SDRAM_REFRESH_MAX) + { + refreshPeriod = SDRAM_REFRESH_MAX; + DB(mvOsPrintf("Dram: sdramConfigRegCalc adjusted refresh interval %0x\n", + refreshPeriod)); + } + + /* Clear the refresh field */ + sdramConfig &= ~SDRAM_REFRESH_MASK; + + /* Set new value to refresh field */ + sdramConfig |= (refreshPeriod & SDRAM_REFRESH_MASK); + + /* registered DRAM ? */ + if ( pBankInfo->registeredAddrAndControlInputs ) + { + /* it's registered DRAM, so set the reg. DRAM bit */ + sdramConfig |= SDRAM_REGISTERED; + DB(mvOsPrintf("DRAM Attribute: Registered address and control inputs.\n");) + } + + /* ECC and IERR support */ + sdramConfig &= ~SDRAM_ECC_MASK; /* Clear ECC field */ + sdramConfig &= ~SDRAM_IERR_MASK; /* Clear IErr field */ + + if ( pBankInfo->errorCheckType ) + { + sdramConfig |= SDRAM_ECC_EN; + sdramConfig |= SDRAM_IERR_REPORTE; + DB(mvOsPrintf("Dram: mvDramIfDetect Enabling ECC\n")); + } + else + { + sdramConfig |= SDRAM_ECC_DIS; + sdramConfig |= SDRAM_IERR_IGNORE; + DB(mvOsPrintf("Dram: mvDramIfDetect Disabling ECC!\n")); + } + /* Set static default settings */ + sdramConfig |= SDRAM_CONFIG_DV; + + DB(mvOsPrintf("Dram: sdramConfigRegCalc set sdramConfig to 0x%x\n", + sdramConfig)); + + return sdramConfig; +} + +/******************************************************************************* +* sdramModeRegCalc - Calculate sdram mode register +* +* DESCRIPTION: Calculate sdram mode register optimized value based +* on the bank info parameters and the minCas. +* +* INPUT: +* minCas - minimum CAS supported. +* +* OUTPUT: +* None +* +* RETURN: +* sdram mode reg value. +* +*******************************************************************************/ +static MV_U32 sdramModeRegCalc(MV_U32 minCas) +{ + MV_U32 sdramMode; + + sdramMode = MV_REG_READ(SDRAM_MODE_REG); + + /* Clear CAS Latency field */ + sdramMode &= ~SDRAM_CL_MASK; + + DB(mvOsPrintf("DRAM CAS Latency ");) + + switch (minCas) + { + case DDR2_CL_3: + sdramMode |= SDRAM_DDR2_CL_3; + DB(mvOsPrintf("3.\n");) + break; + case DDR2_CL_4: + sdramMode |= SDRAM_DDR2_CL_4; + DB(mvOsPrintf("4.\n");) + break; + case DDR2_CL_5: + sdramMode |= SDRAM_DDR2_CL_5; + DB(mvOsPrintf("5.\n");) + break; + case DDR2_CL_6: + sdramMode |= SDRAM_DDR2_CL_6; + DB(mvOsPrintf("6.\n");) + break; + default: + mvOsOutput("\nsdramModeRegCalc ERROR: Max. CL out of range\n"); + return -1; + } + + DB(mvOsPrintf("\nsdramModeRegCalc register 0x%x\n", sdramMode )); + + return sdramMode; +} +/******************************************************************************* +* sdramExtModeRegCalc - Calculate sdram Extended mode register +* +* DESCRIPTION: +* Return sdram Extended mode register value based +* on the bank info parameters and bank presence. +* +* INPUT: +* pBankInfo - sdram bank parameters +* busClk - DRAM frequency +* +* OUTPUT: +* None +* +* RETURN: +* sdram Extended mode reg value. +* +*******************************************************************************/ +static MV_U32 sdramExtModeRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk) +{ + MV_U32 populateBanks = 0; + int bankNum; + + /* Represent the populate banks in binary form */ + for(bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++) + { + if (0 != pBankInfo[bankNum].size) + { + populateBanks |= (1 << bankNum); + } + } + + switch(populateBanks) + { + case(BANK_PRESENT_CS0): + case(BANK_PRESENT_CS0_CS1): + return DDR_SDRAM_EXT_MODE_CS0_CS1_DV; + + case(BANK_PRESENT_CS0_CS2): + case(BANK_PRESENT_CS0_CS1_CS2): + case(BANK_PRESENT_CS0_CS2_CS3): + case(BANK_PRESENT_CS0_CS2_CS3_CS4): + if (busClk >= MV_BOARD_SYSCLK_267MHZ) + return DDR_SDRAM_EXT_MODE_FAST_CS0_CS1_CS2_CS3_DV; + else + return DDR_SDRAM_EXT_MODE_CS0_CS1_CS2_CS3_DV; + + default: + mvOsOutput("sdramExtModeRegCalc: Invalid DRAM bank presence\n"); + return -1; + } + return 0; +} + +/******************************************************************************* +* dunitCtrlLowRegCalc - Calculate sdram dunit control low register +* +* DESCRIPTION: Calculate sdram dunit control low register optimized value based +* on the bank info parameters and the minCas. +* +* INPUT: +* pBankInfo - sdram bank parameters +* minCas - minimum CAS supported. +* +* OUTPUT: +* None +* +* RETURN: +* sdram dunit control low reg value. +* +*******************************************************************************/ +static MV_U32 dunitCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 minCas, MV_U32 busClk, MV_STATUS TTMode) +{ + MV_U32 dunitCtrlLow, cl; + MV_U32 sbOutR[4]={3,5,7,9} ; + MV_U32 sbOutU[4]={1,3,5,7} ; + + dunitCtrlLow = MV_REG_READ(SDRAM_DUNIT_CTRL_REG); + + DB(mvOsPrintf("Dram: dunitCtrlLowRegCalc\n")); + + /* Clear StBurstOutDel field */ + dunitCtrlLow &= ~SDRAM_SB_OUT_MASK; + + /* Clear StBurstInDel field */ + dunitCtrlLow &= ~SDRAM_SB_IN_MASK; + + /* Clear CtrlPos field */ + dunitCtrlLow &= ~SDRAM_CTRL_POS_MASK; + + /* Clear 2T field */ + dunitCtrlLow &= ~SDRAM_2T_MASK; + if (TTMode == MV_TRUE) + { + dunitCtrlLow |= SDRAM_2T_MODE; + } + + /* For proper sample of read data set the Dunit Control register's */ + /* stBurstInDel bits [27:24] */ + /* 200MHz - 267MHz None reg = CL + 1 */ + /* 200MHz - 267MHz reg = CL + 2 */ + /* > 267MHz None reg = CL + 2 */ + /* > 267MHz reg = CL + 3 */ + + /* For proper sample of read data set the Dunit Control register's */ + /* stBurstOutDel bits [23:20] */ + /********-********-********-********- + * CL=3 | CL=4 | CL=5 | CL=6 | + *********-********-********-********- + Not Reg. * 0001 | 0011 | 0101 | 0111 | + *********-********-********-********- + Registered * 0011 | 0101 | 0111 | 1001 | + *********-********-********-********/ + + /* Set Dunit Control low default value */ + dunitCtrlLow |= SDRAM_DUNIT_CTRL_LOW_DDR2_DV; + + switch (minCas) + { + case DDR2_CL_3: cl = 3; break; + case DDR2_CL_4: cl = 4; break; + case DDR2_CL_5: cl = 5; break; + case DDR2_CL_6: cl = 6; break; + default: + mvOsOutput("Dram: dunitCtrlLowRegCalc Max. CL out of range %d\n", minCas); + return -1; + } + + /* registerd DDR SDRAM? */ + if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE) + { + dunitCtrlLow |= (sbOutR[cl-3]) << SDRAM_SB_OUT_DEL_OFFS; + } + else + { + dunitCtrlLow |= (sbOutU[cl-3]) << SDRAM_SB_OUT_DEL_OFFS; + } + + DB(mvOsPrintf("\n\ndunitCtrlLowRegCalc: CL = %d, frequencies=%d\n", cl, busClk)); + + if (busClk <= MV_BOARD_SYSCLK_267MHZ) + { + if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE) + cl = cl + 2; + else + cl = cl + 1; + } + else + { + if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE) + cl = cl + 3; + else + cl = cl + 2; + } + + DB(mvOsPrintf("dunitCtrlLowRegCalc: SDRAM_SB_IN_DEL_OFFS = %d \n", cl)); + dunitCtrlLow |= cl << SDRAM_SB_IN_DEL_OFFS; + + DB(mvOsPrintf("Dram: Reg dunit control low = %x\n", dunitCtrlLow )); + + return dunitCtrlLow; +} + +/******************************************************************************* +* dunitCtrlHighRegCalc - Calculate sdram dunit control high register +* +* DESCRIPTION: Calculate sdram dunit control high register optimized value based +* on the bus clock. +* +* INPUT: +* busClk - DRAM frequency. +* +* OUTPUT: +* None +* +* RETURN: +* sdram dunit control high reg value. +* +*******************************************************************************/ +static MV_U32 dunitCtrlHighRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk) +{ + MV_U32 dunitCtrlHigh; + dunitCtrlHigh = MV_REG_READ(SDRAM_DUNIT_CTRL_HI_REG); + if(busClk > MV_BOARD_SYSCLK_300MHZ) + dunitCtrlHigh |= SDRAM__P2D_EN; + else + dunitCtrlHigh &= ~SDRAM__P2D_EN; + + if(busClk > MV_BOARD_SYSCLK_267MHZ) + dunitCtrlHigh |= (SDRAM__WR_MESH_DELAY_EN | SDRAM__PUP_ZERO_SKEW_EN | SDRAM__ADD_HALF_FCC_EN); + + /* If ECC support we turn on D2P sample */ + dunitCtrlHigh &= ~SDRAM__D2P_EN; /* Clear D2P bit */ + if (( pBankInfo->errorCheckType ) && (busClk > MV_BOARD_SYSCLK_267MHZ)) + dunitCtrlHigh |= SDRAM__D2P_EN; + + return dunitCtrlHigh; +} + +/******************************************************************************* +* sdramAddrCtrlRegCalc - Calculate sdram address control register +* +* DESCRIPTION: Calculate sdram address control register optimized value based +* on the bank info parameters and the minCas. +* +* INPUT: +* pBankInfo - sdram bank parameters +* +* OUTPUT: +* None +* +* RETURN: +* sdram address control reg value. +* +*******************************************************************************/ +static MV_U32 sdramAddrCtrlRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_DRAM_BANK_INFO *pBankInfoDIMM1) +{ + MV_U32 addrCtrl = 0; + + if (pBankInfoDIMM1->size) + { + switch (pBankInfoDIMM1->sdramWidth) + { + case 4: /* memory is x4 */ + mvOsOutput("sdramAddrCtrlRegCalc: Error - x4 not supported!\n"); + return -1; + break; + case 8: /* memory is x8 */ + addrCtrl |= SDRAM_ADDRSEL_X8(2) | SDRAM_ADDRSEL_X8(3); + DB(mvOsPrintf("sdramAddrCtrlRegCalc: sdramAddrCtrlRegCalc SDRAM device DIMM2 width x8\n")); + break; + case 16: + addrCtrl |= SDRAM_ADDRSEL_X16(2) | SDRAM_ADDRSEL_X16(3); + DB(mvOsPrintf("sdramAddrCtrlRegCalc: sdramAddrCtrlRegCalc SDRAM device DIMM2 width x16\n")); + break; + default: /* memory width unsupported */ + mvOsOutput("sdramAddrCtrlRegCalc: ERR. DRAM chip width is unknown!\n"); + return -1; + } + } + + switch (pBankInfo->sdramWidth) + { + case 4: /* memory is x4 */ + mvOsOutput("sdramAddrCtrlRegCalc: Error - x4 not supported!\n"); + return -1; + break; + case 8: /* memory is x8 */ + addrCtrl |= SDRAM_ADDRSEL_X8(0) | SDRAM_ADDRSEL_X8(1); + DB(mvOsPrintf("sdramAddrCtrlRegCalc: sdramAddrCtrlRegCalc SDRAM device width x8\n")); + break; + case 16: + addrCtrl |= SDRAM_ADDRSEL_X16(0) | SDRAM_ADDRSEL_X16(1); + DB(mvOsPrintf("sdramAddrCtrlRegCalc: sdramAddrCtrlRegCalc SDRAM device width x16\n")); + break; + default: /* memory width unsupported */ + mvOsOutput("sdramAddrCtrlRegCalc: ERR. DRAM chip width is unknown!\n"); + return -1; + } + + /* Note that density is in MB units */ + switch (pBankInfo->deviceDensity) + { + case 256: /* 256 Mbit */ + DB(mvOsPrintf("DRAM Device Density 256Mbit\n")); + addrCtrl |= SDRAM_DSIZE_256Mb(0) | SDRAM_DSIZE_256Mb(1); + break; + case 512: /* 512 Mbit */ + DB(mvOsPrintf("DRAM Device Density 512Mbit\n")); + addrCtrl |= SDRAM_DSIZE_512Mb(0) | SDRAM_DSIZE_512Mb(1); + break; + case 1024: /* 1 Gbit */ + DB(mvOsPrintf("DRAM Device Density 1Gbit\n")); + addrCtrl |= SDRAM_DSIZE_1Gb(0) | SDRAM_DSIZE_1Gb(1); + break; + case 2048: /* 2 Gbit */ + DB(mvOsPrintf("DRAM Device Density 2Gbit\n")); + addrCtrl |= SDRAM_DSIZE_2Gb(0) | SDRAM_DSIZE_2Gb(1); + break; + default: + mvOsOutput("Dram: sdramAddrCtrl unsupported RAM-Device size %d\n", + pBankInfo->deviceDensity); + return -1; + } + + if (pBankInfoDIMM1->size) + { + switch (pBankInfoDIMM1->deviceDensity) + { + case 256: /* 256 Mbit */ + DB(mvOsPrintf("DIMM2: DRAM Device Density 256Mbit\n")); + addrCtrl |= SDRAM_DSIZE_256Mb(2) | SDRAM_DSIZE_256Mb(3); + break; + case 512: /* 512 Mbit */ + DB(mvOsPrintf("DIMM2: DRAM Device Density 512Mbit\n")); + addrCtrl |= SDRAM_DSIZE_512Mb(2) | SDRAM_DSIZE_512Mb(3); + break; + case 1024: /* 1 Gbit */ + DB(mvOsPrintf("DIMM2: DRAM Device Density 1Gbit\n")); + addrCtrl |= SDRAM_DSIZE_1Gb(2) | SDRAM_DSIZE_1Gb(3); + break; + case 2048: /* 2 Gbit */ + DB(mvOsPrintf("DIMM2: DRAM Device Density 2Gbit\n")); + addrCtrl |= SDRAM_DSIZE_2Gb(2) | SDRAM_DSIZE_2Gb(3); + break; + default: + mvOsOutput("DIMM2: Dram: sdramAddrCtrl unsupported RAM-Device size %d\n", + pBankInfoDIMM1->deviceDensity); + return -1; + } + } + /* SDRAM address control */ + DB(mvOsPrintf("Dram: setting sdram address control with: %x \n", addrCtrl)); + + return addrCtrl; +} + +/******************************************************************************* +* sdramTimeCtrlLowRegCalc - Calculate sdram timing control low register +* +* DESCRIPTION: +* This function calculates sdram timing control low register +* optimized value based on the bank info parameters and the minCas. +* +* INPUT: +* pBankInfo - sdram bank parameters +* minCas - minimum CAS supported. +* busClk - Bus clock +* +* OUTPUT: +* None +* +* RETURN: +* sdram timing control low reg value. +* +*******************************************************************************/ +static MV_U32 sdramTimeCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 minCas, MV_U32 busClk) +{ + MV_U32 tRp = 0; + MV_U32 tRrd = 0; + MV_U32 tRcd = 0; + MV_U32 tRas = 0; + MV_U32 tWr = 0; + MV_U32 tWtr = 0; + MV_U32 tRtp = 0; + MV_U32 timeCtrlLow = 0; + + MV_U32 bankNum; + + busClk = busClk / 1000000; /* In MHz */ + + /* Scan all DRAM banks to find maximum timing values */ + for (bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++) + { + tRp = MV_MAX(tRp, pBankInfo[bankNum].minRowPrechargeTime); + tRrd = MV_MAX(tRrd, pBankInfo[bankNum].minRowActiveToRowActive); + tRcd = MV_MAX(tRcd, pBankInfo[bankNum].minRasToCasDelay); + tRas = MV_MAX(tRas, pBankInfo[bankNum].minRasPulseWidth); + } + + /* Extract timing (in ns) from SPD value. We ignore the tenth ns part. */ + /* by shifting the data two bits right. */ + tRp = tRp >> 2; /* For example 0x50 -> 20ns */ + tRrd = tRrd >> 2; + tRcd = tRcd >> 2; + + /* Extract clock cycles from time parameter. We need to round up */ + tRp = ((busClk * tRp) / 1000) + (((busClk * tRp) % 1000) ? 1 : 0); + DB(mvOsPrintf("Dram Timing Low: tRp = %d ", tRp)); + tRrd = ((busClk * tRrd) / 1000) + (((busClk * tRrd) % 1000) ? 1 : 0); + /* JEDEC min reqeirments tRrd = 2 */ + if (tRrd < 2) + tRrd = 2; + DB(mvOsPrintf("tRrd = %d ", tRrd)); + tRcd = ((busClk * tRcd) / 1000) + (((busClk * tRcd) % 1000) ? 1 : 0); + DB(mvOsPrintf("tRcd = %d ", tRcd)); + tRas = ((busClk * tRas) / 1000) + (((busClk * tRas) % 1000) ? 1 : 0); + DB(mvOsPrintf("tRas = %d ", tRas)); + + /* tWr and tWtr is different for DDR1 and DDR2. tRtp is only for DDR2 */ + /* Scan all DRAM banks to find maximum timing values */ + for (bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++) + { + tWr = MV_MAX(tWr, pBankInfo[bankNum].minWriteRecoveryTime); + tWtr = MV_MAX(tWtr, pBankInfo[bankNum].minWriteToReadCmdDelay); + tRtp = MV_MAX(tRtp, pBankInfo[bankNum].minReadToPrechCmdDelay); + } + + /* Extract timing (in ns) from SPD value. We ignore the tenth ns */ + /* part by shifting the data two bits right. */ + tWr = tWr >> 2; /* For example 0x50 -> 20ns */ + tWtr = tWtr >> 2; + tRtp = tRtp >> 2; + /* Extract clock cycles from time parameter. We need to round up */ + tWr = ((busClk * tWr) / 1000) + (((busClk * tWr) % 1000) ? 1 : 0); + DB(mvOsPrintf("tWr = %d ", tWr)); + tWtr = ((busClk * tWtr) / 1000) + (((busClk * tWtr) % 1000) ? 1 : 0); + /* JEDEC min reqeirments tWtr = 2 */ + if (tWtr < 2) + tWtr = 2; + DB(mvOsPrintf("tWtr = %d ", tWtr)); + tRtp = ((busClk * tRtp) / 1000) + (((busClk * tRtp) % 1000) ? 1 : 0); + /* JEDEC min reqeirments tRtp = 2 */ + if (tRtp < 2) + tRtp = 2; + DB(mvOsPrintf("tRtp = %d ", tRtp)); + + /* Note: value of 0 in register means one cycle, 1 means two and so on */ + timeCtrlLow = (((tRp - 1) << SDRAM_TRP_OFFS) | + ((tRrd - 1) << SDRAM_TRRD_OFFS) | + ((tRcd - 1) << SDRAM_TRCD_OFFS) | + (((tRas - 1) << SDRAM_TRAS_OFFS) & SDRAM_TRAS_MASK)| + ((tWr - 1) << SDRAM_TWR_OFFS) | + ((tWtr - 1) << SDRAM_TWTR_OFFS) | + ((tRtp - 1) << SDRAM_TRTP_OFFS)); + + /* Check extended tRas bit */ + if ((tRas - 1) & BIT4) + timeCtrlLow |= (1 << SDRAM_EXT_TRAS_OFFS); + + return timeCtrlLow; +} + +/******************************************************************************* +* sdramTimeCtrlHighRegCalc - Calculate sdram timing control high register +* +* DESCRIPTION: +* This function calculates sdram timing control high register +* optimized value based on the bank info parameters and the bus clock. +* +* INPUT: +* pBankInfo - sdram bank parameters +* busClk - Bus clock +* +* OUTPUT: +* None +* +* RETURN: +* sdram timing control high reg value. +* +*******************************************************************************/ +static MV_U32 sdramTimeCtrlHighRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk) +{ + MV_U32 tRfc; + MV_U32 timingHigh; + MV_U32 timeNs = 0; + MV_U32 bankNum; + + busClk = busClk / 1000000; /* In MHz */ + + /* Set DDR timing high register static configuration bits */ + timingHigh = MV_REG_READ(SDRAM_TIMING_CTRL_HIGH_REG); + + /* Set DDR timing high register default value */ + timingHigh |= SDRAM_TIMING_CTRL_HIGH_REG_DV; + + /* Clear tRfc field */ + timingHigh &= ~SDRAM_TRFC_MASK; + + /* Scan all DRAM banks to find maximum timing values */ + for (bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++) + { + timeNs = MV_MAX(timeNs, pBankInfo[bankNum].minRefreshToActiveCmd); + DB(mvOsPrintf("Dram: Timing High: minRefreshToActiveCmd = %d\n", + pBankInfo[bankNum].minRefreshToActiveCmd)); + } + if(busClk >= 333 && mvCtrlModelGet() == MV_78XX0_A1_REV) + { + timingHigh |= 0x1 << SDRAM_TR2W_W2R_OFFS; + } + + tRfc = ((busClk * timeNs) / 1000) + (((busClk * timeNs) % 1000) ? 1 : 0); + /* Note: value of 0 in register means one cycle, 1 means two and so on */ + DB(mvOsPrintf("Dram: Timing High: tRfc = %d\n", tRfc)); + timingHigh |= (((tRfc - 1) & SDRAM_TRFC_MASK) << SDRAM_TRFC_OFFS); + DB(mvOsPrintf("Dram: Timing High: tRfc = %d\n", tRfc)); + + /* SDRAM timing high */ + DB(mvOsPrintf("Dram: setting timing high with: %x \n", timingHigh)); + + return timingHigh; +} +/******************************************************************************* +* sdramDDr2OdtConfig - Set DRAM DDR2 On Die Termination registers. +* +* DESCRIPTION: +* This function config DDR2 On Die Termination (ODT) registers. +* +* INPUT: +* pBankInfo - bank info parameters. +* +* OUTPUT: +* None +* +* RETURN: +* None +*******************************************************************************/ +static void sdramDDr2OdtConfig(MV_DRAM_BANK_INFO *pBankInfo) +{ + MV_U32 populateBanks = 0; + MV_U32 odtCtrlLow, odtCtrlHigh, dunitOdtCtrl; + int bankNum; + + /* Represent the populate banks in binary form */ + for(bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++) + { + if (0 != pBankInfo[bankNum].size) + { + populateBanks |= (1 << bankNum); + } + } + + switch(populateBanks) + { + case(BANK_PRESENT_CS0): + case(BANK_PRESENT_CS0_CS1): + odtCtrlLow = DDR2_ODT_CTRL_LOW_CS0_CS1_DV; + odtCtrlHigh = DDR2_ODT_CTRL_HIGH_CS0_CS1_DV; + dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_CS1_DV; + break; + case(BANK_PRESENT_CS0_CS2): + case(BANK_PRESENT_CS0_CS1_CS2): + case(BANK_PRESENT_CS0_CS2_CS3): + case(BANK_PRESENT_CS0_CS2_CS3_CS4): + odtCtrlLow = DDR2_ODT_CTRL_LOW_CS0_CS1_CS2_CS3_DV; + odtCtrlHigh = DDR2_ODT_CTRL_HIGH_CS0_CS1_CS2_CS3_DV; + dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_CS1_CS2_CS3_DV; + break; + default: + DB(mvOsPrintf("sdramDDr2OdtConfig: Invalid DRAM bank presence\n")); + return; + } + /* DDR2 SDRAM ODT ctrl low */ + DB(mvOsPrintf("Dram: DDR2 setting ODT ctrl low with: %x \n", odtCtrlLow)); + MV_REG_WRITE(DRAM_BUF_REG7, odtCtrlLow); + + /* DDR2 SDRAM ODT ctrl high */ + DB(mvOsPrintf("Dram: DDR2 setting ODT ctrl high with: %x \n", odtCtrlHigh)); + MV_REG_WRITE(DRAM_BUF_REG8, odtCtrlHigh); + + /* DDR2 DUNIT ODT ctrl */ + if ( ((mvCtrlModelGet() == MV_78XX0_DEV_ID) && (mvCtrlRevGet() == MV_78XX0_Y0_REV)) || + (mvCtrlModelGet() == MV_76100_DEV_ID) || + (mvCtrlModelGet() == MV_78100_DEV_ID) || + (mvCtrlModelGet() == MV_78200_DEV_ID) ) + dunitOdtCtrl &= ~(BIT9|BIT8); /* Clear ODT always on */ + + DB(mvOsPrintf("DUNIT: DDR2 setting ODT ctrl with: %x \n", dunitOdtCtrl)); + MV_REG_WRITE(DRAM_BUF_REG9, dunitOdtCtrl); + return; +} +/******************************************************************************* +* sdramDdr2TimeLoRegCalc - Set DDR2 DRAM Timing Low registers. +* +* DESCRIPTION: +* This function config DDR2 DRAM Timing low registers. +* +* INPUT: +* minCas - minimum CAS supported. +* +* OUTPUT: +* None +* +* RETURN: +* DDR2 sdram timing low reg value. +*******************************************************************************/ +static MV_U32 sdramDdr2TimeLoRegCalc(MV_U32 minCas) +{ + MV_U8 cl = -1; + MV_U32 ddr2TimeLoReg; + + /* read and clear the feilds we are going to set */ + ddr2TimeLoReg = MV_REG_READ(SDRAM_DDR2_TIMING_LO_REG); + ddr2TimeLoReg &= ~(SD2TLR_TODT_ON_RD_MASK | + SD2TLR_TODT_OFF_RD_MASK | + SD2TLR_TODT_ON_CTRL_RD_MASK | + SD2TLR_TODT_OFF_CTRL_RD_MASK); + + if( minCas == DDR2_CL_3 ) + { + cl = 3; + } + else if( minCas == DDR2_CL_4 ) + { + cl = 4; + } + else if( minCas == DDR2_CL_5 ) + { + cl = 5; + } + else if( minCas == DDR2_CL_6 ) + { + cl = 6; + } + else + { + DB(mvOsPrintf("sdramDdr2TimeLoRegCalc: CAS latency %d unsupported. using CAS latency 4\n", + minCas)); + cl = 4; + } + + ddr2TimeLoReg |= ((cl-3) << SD2TLR_TODT_ON_RD_OFFS); + ddr2TimeLoReg |= ( cl << SD2TLR_TODT_OFF_RD_OFFS); + ddr2TimeLoReg |= ( cl << SD2TLR_TODT_ON_CTRL_RD_OFFS); + ddr2TimeLoReg |= ((cl+3) << SD2TLR_TODT_OFF_CTRL_RD_OFFS); + + /* DDR2 SDRAM timing low */ + DB(mvOsPrintf("Dram: DDR2 setting timing low with: %x \n", ddr2TimeLoReg)); + + return ddr2TimeLoReg; +} + +/******************************************************************************* +* sdramDdr2TimeHiRegCalc - Set DDR2 DRAM Timing High registers. +* +* DESCRIPTION: +* This function config DDR2 DRAM Timing high registers. +* +* INPUT: +* minCas - minimum CAS supported. +* +* OUTPUT: +* None +* +* RETURN: +* DDR2 sdram timing high reg value. +*******************************************************************************/ +static MV_U32 sdramDdr2TimeHiRegCalc(MV_U32 minCas) +{ + MV_U8 cl = -1; + MV_U32 ddr2TimeHiReg; + + /* read and clear the feilds we are going to set */ + ddr2TimeHiReg = MV_REG_READ(SDRAM_DDR2_TIMING_HI_REG); + ddr2TimeHiReg &= ~(SD2THR_TODT_ON_WR_MASK | + SD2THR_TODT_OFF_WR_MASK | + SD2THR_TODT_ON_CTRL_WR_MASK | + SD2THR_TODT_OFF_CTRL_WR_MASK); + + if( minCas == DDR2_CL_3 ) + { + cl = 3; + } + else if( minCas == DDR2_CL_4 ) + { + cl = 4; + } + else if( minCas == DDR2_CL_5 ) + { + cl = 5; + } + else if( minCas == DDR2_CL_6 ) + { + cl = 6; + } + else + { + mvOsOutput("sdramDdr2TimeHiRegCalc: CAS latency %d unsupported. using CAS latency 4\n", + minCas); + cl = 4; + } + + ddr2TimeHiReg |= ((cl-3) << SD2THR_TODT_ON_WR_OFFS); + ddr2TimeHiReg |= ( cl << SD2THR_TODT_OFF_WR_OFFS); + ddr2TimeHiReg |= ( cl << SD2THR_TODT_ON_CTRL_WR_OFFS); + ddr2TimeHiReg |= ((cl+3) << SD2THR_TODT_OFF_CTRL_WR_OFFS); + + /* DDR2 SDRAM timin high */ + DB(mvOsPrintf("Dram: DDR2 setting timing high with: %x \n", ddr2TimeHiReg)); + + return ddr2TimeHiReg; +} +#endif + +/******************************************************************************* +* mvDramIfCalGet - Get CAS Latency +* +* DESCRIPTION: +* This function get the CAS Latency. +* +* INPUT: +* None +* +* OUTPUT: +* None +* +* RETURN: +* CAS latency times 10 (to avoid using floating point). +* +*******************************************************************************/ +MV_U32 mvDramIfCalGet(void) +{ + MV_U32 sdramCasLat, casLatMask; + + casLatMask = (MV_REG_READ(SDRAM_MODE_REG) & SDRAM_CL_MASK); + + switch (casLatMask) + { + case SDRAM_DDR2_CL_3: + sdramCasLat = 30; + break; + case SDRAM_DDR2_CL_4: + sdramCasLat = 40; + break; + case SDRAM_DDR2_CL_5: + sdramCasLat = 50; + break; + case SDRAM_DDR2_CL_6: + sdramCasLat = 60; + break; + default: + mvOsOutput("mvDramIfCalGet: Err, unknown DDR2 CAL\n"); + return -1; + } + + return sdramCasLat; +} + + +/******************************************************************************* +* mvDramIfSelfRefreshSet - Put the dram in self refresh mode - +* +* DESCRIPTION: +* add support in power management. +* +* +* INPUT: +* None +* +* OUTPUT: +* None +* +* RETURN: +* None +* +*******************************************************************************/ + +MV_VOID mvDramIfSelfRefreshSet() +{ + MV_U32 operReg; + + operReg = MV_REG_READ(SDRAM_OPERATION_REG); + MV_REG_WRITE(SDRAM_OPERATION_REG ,operReg |SDRAM_CMD_SLF_RFRSH); + /* Read until register is reset to 0 */ + while(MV_REG_READ(SDRAM_OPERATION_REG)); +} +/******************************************************************************* +* mvDramIfDimGetSPDversion - return DIMM SPD version. +* +* DESCRIPTION: +* This function prints the DRAM controller information. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +static void mvDramIfDimGetSPDversion(MV_U32 *pMajor, MV_U32 *pMinor, MV_U32 bankNum) +{ + MV_DIMM_INFO dimmInfo; + if (bankNum >= MV_DRAM_MAX_CS ) + { + DB(mvOsPrintf("Dram: mvDramIfDimGetSPDversion bad params \n")); + return ; + } + memset(&dimmInfo,0,sizeof(dimmInfo)); + if ( MV_OK != dimmSpdGet((MV_U32)(bankNum/2), &dimmInfo)) + { + DB(mvOsPrintf("Dram: ERR dimmSpdGet failed to get dimm info \n")); + return ; + } + *pMajor = dimmInfo.spdRawData[DIMM_SPD_VERSION]/10; + *pMinor = dimmInfo.spdRawData[DIMM_SPD_VERSION]%10; +} +/******************************************************************************* +* mvDramIfShow - Show DRAM controller information. +* +* DESCRIPTION: +* This function prints the DRAM controller information. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +void mvDramIfShow(void) +{ + int i, sdramCasLat, sdramCsSize; + MV_U32 Major=0, Minor=0; + + mvOsOutput("DRAM Controller info:\n"); + + mvOsOutput("Total DRAM "); + mvSizePrint(mvDramIfSizeGet()); + mvOsOutput("\n"); + + for(i = 0; i < MV_DRAM_MAX_CS; i++) + { + sdramCsSize = mvDramIfBankSizeGet(i); + if (sdramCsSize) + { + if (0 == (i & 1)) + { + mvDramIfDimGetSPDversion(&Major, &Minor,i); + mvOsOutput("DIMM %d version %d.%d\n", i/2, Major, Minor); + } + mvOsOutput("\tDRAM CS[%d] ", i); + mvSizePrint(sdramCsSize); + mvOsOutput("\n"); + } + } + sdramCasLat = mvDramIfCalGet(); + + if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_ECC_EN) + { + mvOsOutput("ECC enabled, "); + } + else + { + mvOsOutput("ECC Disabled, "); + } + + if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_REGISTERED) + { + mvOsOutput("Registered DIMM\n"); + } + else + { + mvOsOutput("Non registered DIMM\n"); + } + + mvOsOutput("Configured CAS Latency %d.%d\n", sdramCasLat/10, sdramCasLat%10); +} +/******************************************************************************* +* mvDramIfGetFirstCS - find the DRAM bank on the lower address +* +* +* DESCRIPTION: +* This function return the fisrt CS on address 0 +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* SDRAM_CS0 or SDRAM_CS2 +* +*******************************************************************************/ +MV_U32 mvDramIfGetFirstCS(void) +{ + MV_DRAM_BANK_INFO bankInfo[MV_DRAM_MAX_CS]; + + if (DRAM_CS_Order[0] == N_A) + { + mvDramBankInfoGet(SDRAM_CS0, &bankInfo[SDRAM_CS0]); +#ifdef MV_INCLUDE_SDRAM_CS2 + mvDramBankInfoGet(SDRAM_CS2, &bankInfo[SDRAM_CS2]); +#endif + +#ifdef MV_INCLUDE_SDRAM_CS2 + if (bankInfo[SDRAM_CS0].size < bankInfo[SDRAM_CS2].size) + { + DRAM_CS_Order[0] = SDRAM_CS2; + DRAM_CS_Order[1] = SDRAM_CS3; + DRAM_CS_Order[2] = SDRAM_CS0; + DRAM_CS_Order[3] = SDRAM_CS1; + + return SDRAM_CS2; + } +#endif + DRAM_CS_Order[0] = SDRAM_CS0; + DRAM_CS_Order[1] = SDRAM_CS1; +#ifdef MV_INCLUDE_SDRAM_CS2 + DRAM_CS_Order[2] = SDRAM_CS2; + DRAM_CS_Order[3] = SDRAM_CS3; +#endif + return SDRAM_CS0; + } + return DRAM_CS_Order[0]; +} +/******************************************************************************* +* mvDramIfGetCSorder - +* +* +* DESCRIPTION: +* This function return the fisrt CS on address 0 +* +* INPUT: +* CS number. +* +* OUTPUT: +* CS order. +* +* RETURN: +* SDRAM_CS0 or SDRAM_CS2 +* +* NOTE: mvDramIfGetFirstCS must be caled before this subroutine +*******************************************************************************/ +MV_U32 mvDramIfGetCSorder(MV_U32 csOrder ) +{ + return DRAM_CS_Order[csOrder]; +} + diff --git a/target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIf.h b/target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIf.h new file mode 100644 index 000000000..23f2e540c --- /dev/null +++ b/target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIf.h @@ -0,0 +1,172 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +#ifndef __INCmvDramIfh +#define __INCmvDramIfh + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* includes */ +#include "ddr2/mvDramIfRegs.h" +#include "ddr2/mvDramIfConfig.h" +#include "ctrlEnv/mvCtrlEnvLib.h" + +/* defines */ +/* DRAM Timing parameters */ +#define SDRAM_TWR 15 /* ns tWr */ +#define SDRAM_TRFC_64_512M_AT_200MHZ 70 /* ns tRfc for dens 64-512 @ 200MHz */ +#define SDRAM_TRFC_64_512M 75 /* ns tRfc for dens 64-512 */ +#define SDRAM_TRFC_1G 120 /* ns tRfc for dens 1GB */ +#define SDRAM_TR2R_CYC 1 /* cycle for tR2r */ + +#define CAL_AUTO_DETECT 0 /* Do not force CAS latancy (mvDramIfDetect) */ +#define ECC_DISABLE 1 /* Force ECC to Disable */ +#define ECC_ENABLE 0 /* Force ECC to ENABLE */ +/* typedefs */ + +/* enumeration for memory types */ +typedef enum _mvMemoryType +{ + MEM_TYPE_SDRAM, + MEM_TYPE_DDR1, + MEM_TYPE_DDR2 +}MV_MEMORY_TYPE; + +/* enumeration for DDR2 supported CAS Latencies */ +typedef enum _mvDimmDdr2Cas +{ + DDR2_CL_3 = 0x08, + DDR2_CL_4 = 0x10, + DDR2_CL_5 = 0x20, + DDR2_CL_6 = 0x40, + DDR2_CL_FAULT +} MV_DIMM_DDR2_CAS; + + +typedef struct _mvDramBankInfo +{ + MV_MEMORY_TYPE memoryType; /* DDR1, DDR2 or SDRAM */ + + /* DIMM dimensions */ + MV_U32 numOfRowAddr; + MV_U32 numOfColAddr; + MV_U32 dataWidth; + MV_U32 errorCheckType; /* ECC , PARITY..*/ + MV_U32 sdramWidth; /* 4,8,16 or 32 */ + MV_U32 errorCheckDataWidth; /* 0 - no, 1 - Yes */ + MV_U32 burstLengthSupported; + MV_U32 numOfBanksOnEachDevice; + MV_U32 suportedCasLatencies; + MV_U32 refreshInterval; + + /* DIMM timing parameters */ + MV_U32 minCycleTimeAtMaxCasLatPs; + MV_U32 minCycleTimeAtMaxCasLatMinus1Ps; + MV_U32 minCycleTimeAtMaxCasLatMinus2Ps; + MV_U32 minRowPrechargeTime; + MV_U32 minRowActiveToRowActive; + MV_U32 minRasToCasDelay; + MV_U32 minRasPulseWidth; + MV_U32 minWriteRecoveryTime; /* DDR2 only */ + MV_U32 minWriteToReadCmdDelay; /* DDR2 only */ + MV_U32 minReadToPrechCmdDelay; /* DDR2 only */ + MV_U32 minRefreshToActiveCmd; /* DDR2 only */ + + /* Parameters calculated from the extracted DIMM information */ + MV_U32 size; + MV_U32 deviceDensity; /* 16,64,128,256 or 512 Mbit */ + MV_U32 numberOfDevices; + + /* DIMM attributes (MV_TRUE for yes) */ + MV_BOOL registeredAddrAndControlInputs; + MV_BOOL registeredDQMBinputs; + +}MV_DRAM_BANK_INFO; + +#include "ddr2/spd/mvSpd.h" + +/* mvDramIf.h API list */ +MV_VOID mvDramIfBasicAsmInit(MV_VOID); +MV_STATUS mvDramIfDetect(MV_U32 forcedCl, MV_BOOL eccDisable); +MV_VOID _mvDramIfConfig(int entryNum); + +MV_U32 mvDramIfBankSizeGet(MV_U32 bankNum); +MV_U32 mvDramIfBankBaseGet(MV_U32 bankNum); +MV_U32 mvDramIfSizeGet(MV_VOID); +MV_U32 mvDramIfCalGet(void); +MV_STATUS mvDramIfSingleBitErrThresholdSet(MV_U32 threshold); +MV_VOID mvDramIfSelfRefreshSet(void); +void mvDramIfShow(void); +MV_U32 mvDramIfGetFirstCS(void); +MV_U32 mvDramIfGetCSorder(MV_U32 csOrder ); +MV_U32 mvDramCsSizeGet(MV_U32 csNum); + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __INCmvDramIfh */ diff --git a/target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfConfig.h b/target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfConfig.h new file mode 100644 index 000000000..6141c46a0 --- /dev/null +++ b/target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfConfig.h @@ -0,0 +1,157 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +#ifndef __INCmvDramIfConfigh +#define __INCmvDramIfConfigh + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* includes */ + +/* defines */ + +/* registers defaults values */ + +#define SDRAM_CONFIG_DV (SDRAM_SRMODE_DRAM | BIT25 | BIT30) + +#define SDRAM_DUNIT_CTRL_LOW_DDR2_DV \ + (SDRAM_SRCLK_KEPT | \ + SDRAM_CLK1DRV_NORMAL | \ + (BIT28 | BIT29)) + +#define SDRAM_ADDR_CTRL_DV 2 + +#define SDRAM_TIMING_CTRL_LOW_REG_DV \ + ((0x2 << SDRAM_TRCD_OFFS) | \ + (0x2 << SDRAM_TRP_OFFS) | \ + (0x1 << SDRAM_TWR_OFFS) | \ + (0x0 << SDRAM_TWTR_OFFS) | \ + (0x5 << SDRAM_TRAS_OFFS) | \ + (0x1 << SDRAM_TRRD_OFFS)) + +/* Note: value of 0 in register means one cycle, 1 means two and so on */ +#define SDRAM_TIMING_CTRL_HIGH_REG_DV \ + ((0x0 << SDRAM_TR2R_OFFS) | \ + (0x0 << SDRAM_TR2W_W2R_OFFS) | \ + (0x1 << SDRAM_TW2W_OFFS)) + +#define SDRAM_OPEN_PAGES_CTRL_REG_DV SDRAM_OPEN_PAGE_EN + +/* Presence Ctrl Low Ctrl High Dunit Ctrl Ext Mode */ +/* CS0 0x84210000 0x00000000 0x0000780F 0x00000440 */ +/* CS0+CS1 0x84210000 0x00000000 0x0000780F 0x00000440 */ +/* CS0+CS2 0x030C030C 0x00000000 0x0000740F 0x00000404 */ +/* CS0+CS1+CS2 0x030C030C 0x00000000 0x0000740F 0x00000404 */ +/* CS0+CS2+CS3 0x030C030C 0x00000000 0x0000740F 0x00000404 */ +/* CS0+CS1+CS2+CS3 0x030C030C 0x00000000 0x0000740F 0x00000404 */ + +#define DDR2_ODT_CTRL_LOW_CS0_CS1_DV 0x84210000 +#define DDR2_ODT_CTRL_HIGH_CS0_CS1_DV 0x00000000 +#define DDR2_DUNIT_ODT_CTRL_CS0_CS1_DV 0x0000E80F +#ifdef MV78XX0 +#define DDR_SDRAM_EXT_MODE_CS0_CS1_DV 0x00000040 +#else +#define DDR_SDRAM_EXT_MODE_CS0_CS1_DV 0x00000440 +#endif + +#define DDR2_ODT_CTRL_LOW_CS0_CS1_CS2_CS3_DV 0x030C030C +#define DDR2_ODT_CTRL_HIGH_CS0_CS1_CS2_CS3_DV 0x00000000 +#define DDR2_DUNIT_ODT_CTRL_CS0_CS1_CS2_CS3_DV 0x0000F40F +#ifdef MV78XX0 +#define DDR_SDRAM_EXT_MODE_CS0_CS1_CS2_CS3_DV 0x00000004 +#define DDR_SDRAM_EXT_MODE_FAST_CS0_CS1_CS2_CS3_DV 0x00000044 +#else +#define DDR_SDRAM_EXT_MODE_CS0_CS1_CS2_CS3_DV 0x00000404 +#define DDR_SDRAM_EXT_MODE_FAST_CS0_CS1_CS2_CS3_DV 0x00000444 +#endif + +/* DDR SDRAM Adderss/Control and Data Pads Calibration default values */ +#define DDR2_ADDR_CTRL_PAD_STRENGTH_TYPICAL_DV \ + (3 << SDRAM_PRE_DRIVER_STRENGTH_OFFS) + +#define DDR2_DATA_PAD_STRENGTH_TYPICAL_DV \ + (3 << SDRAM_PRE_DRIVER_STRENGTH_OFFS) + +/* DDR SDRAM Mode Register default value */ +#define DDR2_MODE_REG_DV (SDRAM_BURST_LEN_4 | SDRAM_WR_3_CYC) +/* DDR SDRAM Timing parameter default values */ +#define SDRAM_TIMING_CTRL_LOW_REG_DEFAULT 0x33136552 +#define SDRAM_TRFC_DEFAULT_VALUE 0x34 +#define SDRAM_TRFC_DEFAULT SDRAM_TRFC_DEFAULT_VALUE +#define SDRAM_TW2W_DEFALT (0x1 << SDRAM_TW2W_OFFS) + +#define SDRAM_TIMING_CTRL_HIGH_REG_DEFAULT (SDRAM_TRFC_DEFAULT | SDRAM_TW2W_DEFALT) + +#define SDRAM_FTDLL_REG_DEFAULT_LEFT 0x88C800 +#define SDRAM_FTDLL_REG_DEFAULT_RIGHT 0x88C800 +#define SDRAM_FTDLL_REG_DEFAULT_UP 0x88C800 + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __INCmvDramIfh */ diff --git a/target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfRegs.h b/target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfRegs.h new file mode 100644 index 000000000..369eda692 --- /dev/null +++ b/target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfRegs.h @@ -0,0 +1,423 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCmvDramIfRegsh +#define __INCmvDramIfRegsh + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* DDR SDRAM Controller Address Decode Registers */ + /* SDRAM CSn Base Address Register (SCBAR) */ +#define SDRAM_BASE_ADDR_REG(cpu,csNum) (0x1500 + ((csNum) * 8) + ((cpu) * 0x70)) +#define SCBAR_BASE_OFFS 16 +#define SCBAR_BASE_MASK (0xffff << SCBAR_BASE_OFFS) +#define SCBAR_BASE_ALIGNMENT 0x10000 + +/* SDRAM CSn Size Register (SCSR) */ +#define SDRAM_SIZE_REG(cpu,csNum) (0x1504 + ((csNum) * 8) + ((cpu) * 0x70)) +#define SCSR_SIZE_OFFS 24 +#define SCSR_SIZE_MASK (0xff << SCSR_SIZE_OFFS) +#define SCSR_SIZE_ALIGNMENT 0x1000000 +#define SCSR_WIN_EN BIT0 + +/* configuration register */ +#define SDRAM_CONFIG_REG (DRAM_BASE + 0x1400) +#define SDRAM_REFRESH_OFFS 0 +#define SDRAM_REFRESH_MAX 0x3FFF +#define SDRAM_REFRESH_MASK (SDRAM_REFRESH_MAX << SDRAM_REFRESH_OFFS) +#define SDRAM_DWIDTH_OFFS 15 +#define SDRAM_DWIDTH_MASK (1 << SDRAM_DWIDTH_OFFS) +#define SDRAM_DWIDTH_32BIT (0 << SDRAM_DWIDTH_OFFS) +#define SDRAM_DWIDTH_64BIT (1 << SDRAM_DWIDTH_OFFS) +#define SDRAM_REGISTERED (1 << 17) +#define SDRAM_ECC_OFFS 18 +#define SDRAM_ECC_MASK (1 << SDRAM_ECC_OFFS) +#define SDRAM_ECC_DIS (0 << SDRAM_ECC_OFFS) +#define SDRAM_ECC_EN (1 << SDRAM_ECC_OFFS) +#define SDRAM_IERR_OFFS 19 +#define SDRAM_IERR_MASK (1 << SDRAM_IERR_OFFS) +#define SDRAM_IERR_REPORTE (0 << SDRAM_IERR_OFFS) +#define SDRAM_IERR_IGNORE (1 << SDRAM_IERR_OFFS) +#define SDRAM_SRMODE_OFFS 24 +#define SDRAM_SRMODE_MASK (1 << SDRAM_SRMODE_OFFS) +#define SDRAM_SRMODE_POWER (0 << SDRAM_SRMODE_OFFS) +#define SDRAM_SRMODE_DRAM (1 << SDRAM_SRMODE_OFFS) + +/* dunit control low register */ +#define SDRAM_DUNIT_CTRL_REG (DRAM_BASE + 0x1404) +#define SDRAM_2T_OFFS 4 +#define SDRAM_2T_MASK (1 << SDRAM_2T_OFFS) +#define SDRAM_2T_MODE (1 << SDRAM_2T_OFFS) + +#define SDRAM_SRCLK_OFFS 5 +#define SDRAM_SRCLK_MASK (1 << SDRAM_SRCLK_OFFS) +#define SDRAM_SRCLK_KEPT (0 << SDRAM_SRCLK_OFFS) +#define SDRAM_SRCLK_GATED (1 << SDRAM_SRCLK_OFFS) +#define SDRAM_CTRL_POS_OFFS 6 +#define SDRAM_CTRL_POS_MASK (1 << SDRAM_CTRL_POS_OFFS) +#define SDRAM_CTRL_POS_FALL (0 << SDRAM_CTRL_POS_OFFS) +#define SDRAM_CTRL_POS_RISE (1 << SDRAM_CTRL_POS_OFFS) +#define SDRAM_CLK1DRV_OFFS 12 +#define SDRAM_CLK1DRV_MASK (1 << SDRAM_CLK1DRV_OFFS) +#define SDRAM_CLK1DRV_HIGH_Z (0 << SDRAM_CLK1DRV_OFFS) +#define SDRAM_CLK1DRV_NORMAL (1 << SDRAM_CLK1DRV_OFFS) +#define SDRAM_CLK2DRV_OFFS 13 +#define SDRAM_CLK2DRV_MASK (1 << SDRAM_CLK2DRV_OFFS) +#define SDRAM_CLK2DRV_HIGH_Z (0 << SDRAM_CLK2DRV_OFFS) +#define SDRAM_CLK2DRV_NORMAL (1 << SDRAM_CLK2DRV_OFFS) +#define SDRAM_SB_OUT_DEL_OFFS 20 +#define SDRAM_SB_OUT_DEL_MAX 0xf +#define SDRAM_SB_OUT_MASK (SDRAM_SB_OUT_DEL_MAX<<SDRAM_SB_OUT_DEL_OFFS) +#define SDRAM_SB_IN_DEL_OFFS 24 +#define SDRAM_SB_IN_DEL_MAX 0xf +#define SDRAM_SB_IN_MASK (SDRAM_SB_IN_DEL_MAX<<SDRAM_SB_IN_DEL_OFFS) + +/* dunit control hight register */ +#define SDRAM_DUNIT_CTRL_HI_REG (DRAM_BASE + 0x1424) +#define SDRAM__D2P_OFFS 7 +#define SDRAM__D2P_EN (1 << SDRAM__D2P_OFFS) +#define SDRAM__P2D_OFFS 8 +#define SDRAM__P2D_EN (1 << SDRAM__P2D_OFFS) +#define SDRAM__ADD_HALF_FCC_OFFS 9 +#define SDRAM__ADD_HALF_FCC_EN (1 << SDRAM__ADD_HALF_FCC_OFFS) +#define SDRAM__PUP_ZERO_SKEW_OFFS 10 +#define SDRAM__PUP_ZERO_SKEW_EN (1 << SDRAM__PUP_ZERO_SKEW_OFFS) +#define SDRAM__WR_MESH_DELAY_OFFS 11 +#define SDRAM__WR_MESH_DELAY_EN (1 << SDRAM__WR_MESH_DELAY_OFFS) + +/* sdram timing control low register */ +#define SDRAM_TIMING_CTRL_LOW_REG (DRAM_BASE + 0x1408) +#define SDRAM_TRCD_OFFS 4 +#define SDRAM_TRCD_MASK (0xF << SDRAM_TRCD_OFFS) +#define SDRAM_TRP_OFFS 8 +#define SDRAM_TRP_MASK (0xF << SDRAM_TRP_OFFS) +#define SDRAM_TWR_OFFS 12 +#define SDRAM_TWR_MASK (0xF << SDRAM_TWR_OFFS) +#define SDRAM_TWTR_OFFS 16 +#define SDRAM_TWTR_MASK (0xF << SDRAM_TWTR_OFFS) +#define SDRAM_TRAS_OFFS 0 +#define SDRAM_TRAS_MASK (0xF << SDRAM_TRAS_OFFS) +#define SDRAM_EXT_TRAS_OFFS 20 +#define SDRAM_EXT_TRAS_MASK (0x1 << SDRAM_EXT_TRAS_OFFS) +#define SDRAM_TRRD_OFFS 24 +#define SDRAM_TRRD_MASK (0xF << SDRAM_TRRD_OFFS) +#define SDRAM_TRTP_OFFS 28 +#define SDRAM_TRTP_MASK (0xF << SDRAM_TRTP_OFFS) +#define SDRAM_TRTP_DDR1 (0x1 << SDRAM_TRTP_OFFS) + +/* sdram timing control high register */ +#define SDRAM_TIMING_CTRL_HIGH_REG (DRAM_BASE + 0x140c) +#define SDRAM_TRFC_OFFS 0 +#define SDRAM_TRFC_MASK (0x3F << SDRAM_TRFC_OFFS) +#define SDRAM_TR2R_OFFS 7 +#define SDRAM_TR2R_MASK (0x3 << SDRAM_TR2R_OFFS) +#define SDRAM_TR2W_W2R_OFFS 9 +#define SDRAM_TR2W_W2R_MASK (0x3 << SDRAM_TR2W_W2R_OFFS) +#define SDRAM_TW2W_OFFS 11 +#define SDRAM_TW2W_MASK (0x3 << SDRAM_TW2W_OFFS) + +/* sdram DDR2 timing low register (SD2TLR) */ +#define SDRAM_DDR2_TIMING_LO_REG (DRAM_BASE + 0x1428) +#define SD2TLR_TODT_ON_RD_OFFS 4 +#define SD2TLR_TODT_ON_RD_MASK (0xF << SD2TLR_TODT_ON_RD_OFFS) +#define SD2TLR_TODT_OFF_RD_OFFS 8 +#define SD2TLR_TODT_OFF_RD_MASK (0xF << SD2TLR_TODT_OFF_RD_OFFS) +#define SD2TLR_TODT_ON_CTRL_RD_OFFS 12 +#define SD2TLR_TODT_ON_CTRL_RD_MASK (0xF << SD2TLR_TODT_ON_CTRL_RD_OFFS) +#define SD2TLR_TODT_OFF_CTRL_RD_OFFS 16 +#define SD2TLR_TODT_OFF_CTRL_RD_MASK (0xF << SD2TLR_TODT_OFF_CTRL_RD_OFFS) + +/* sdram DDR2 timing high register (SD2TLR) */ +#define SDRAM_DDR2_TIMING_HI_REG (DRAM_BASE + 0x147C) +#define SD2THR_TODT_ON_WR_OFFS 0 +#define SD2THR_TODT_ON_WR_MASK (0xF << SD2THR_TODT_ON_WR_OFFS) +#define SD2THR_TODT_OFF_WR_OFFS 4 +#define SD2THR_TODT_OFF_WR_MASK (0xF << SD2THR_TODT_OFF_WR_OFFS) +#define SD2THR_TODT_ON_CTRL_WR_OFFS 8 +#define SD2THR_TODT_ON_CTRL_WR_MASK (0xF << SD2THR_TODT_ON_CTRL_WR_OFFS) +#define SD2THR_TODT_OFF_CTRL_WR_OFFS 12 +#define SD2THR_TODT_OFF_CTRL_WR_MASK (0xF << SD2THR_TODT_OFF_CTRL_WR_OFFS) + +/* address control register */ +#define SDRAM_ADDR_CTRL_REG (DRAM_BASE + 0x1410) +#define SDRAM_ADDRSEL_OFFS(cs) (4 * (cs)) +#define SDRAM_ADDRSEL_MASK(cs) (0x3 << SDRAM_ADDRSEL_OFFS(cs)) +#define SDRAM_ADDRSEL_X8(cs) (0x0 << SDRAM_ADDRSEL_OFFS(cs)) +#define SDRAM_ADDRSEL_X16(cs) (0x1 << SDRAM_ADDRSEL_OFFS(cs)) +#define SDRAM_DSIZE_OFFS(cs) (2 + 4 * (cs)) +#define SDRAM_DSIZE_MASK(cs) (0x3 << SDRAM_DSIZE_OFFS(cs)) +#define SDRAM_DSIZE_256Mb(cs) (0x1 << SDRAM_DSIZE_OFFS(cs)) +#define SDRAM_DSIZE_512Mb(cs) (0x2 << SDRAM_DSIZE_OFFS(cs)) +#define SDRAM_DSIZE_1Gb(cs) (0x3 << SDRAM_DSIZE_OFFS(cs)) +#define SDRAM_DSIZE_2Gb(cs) (0x0 << SDRAM_DSIZE_OFFS(cs)) + +/* SDRAM Open Pages Control registers */ +#define SDRAM_OPEN_PAGE_CTRL_REG (DRAM_BASE + 0x1414) +#define SDRAM_OPEN_PAGE_EN (0 << 0) +#define SDRAM_OPEN_PAGE_DIS (1 << 0) + +/* sdram opertion register */ +#define SDRAM_OPERATION_REG (DRAM_BASE + 0x1418) +#define SDRAM_CMD_OFFS 0 +#define SDRAM_CMD_MASK (0xF << SDRAM_CMD_OFFS) +#define SDRAM_CMD_NORMAL (0x0 << SDRAM_CMD_OFFS) +#define SDRAM_CMD_PRECHARGE_ALL (0x1 << SDRAM_CMD_OFFS) +#define SDRAM_CMD_REFRESH_ALL (0x2 << SDRAM_CMD_OFFS) +#define SDRAM_CMD_REG_SET_CMD (0x3 << SDRAM_CMD_OFFS) +#define SDRAM_CMD_EXT_MODE_SET (0x4 << SDRAM_CMD_OFFS) +#define SDRAM_CMD_NOP (0x5 << SDRAM_CMD_OFFS) +#define SDRAM_CMD_SLF_RFRSH (0x7 << SDRAM_CMD_OFFS) +#define SDRAM_CMD_EMRS2_CMD (0x8 << SDRAM_CMD_OFFS) +#define SDRAM_CMD_EMRS3_CMD (0x9 << SDRAM_CMD_OFFS) + +/* sdram mode register */ +#define SDRAM_MODE_REG (DRAM_BASE + 0x141c) +#define SDRAM_BURST_LEN_OFFS 0 +#define SDRAM_BURST_LEN_MASK (0x7 << SDRAM_BURST_LEN_OFFS) +#define SDRAM_BURST_LEN_4 (0x2 << SDRAM_BURST_LEN_OFFS) +#define SDRAM_CL_OFFS 4 +#define SDRAM_CL_MASK (0x7 << SDRAM_CL_OFFS) +#define SDRAM_DDR2_CL_3 (0x3 << SDRAM_CL_OFFS) +#define SDRAM_DDR2_CL_4 (0x4 << SDRAM_CL_OFFS) +#define SDRAM_DDR2_CL_5 (0x5 << SDRAM_CL_OFFS) +#define SDRAM_DDR2_CL_6 (0x6 << SDRAM_CL_OFFS) + +#define SDRAM_TM_OFFS 7 +#define SDRAM_TM_MASK (1 << SDRAM_TM_OFFS) +#define SDRAM_TM_NORMAL (0 << SDRAM_TM_OFFS) +#define SDRAM_TM_TEST_MODE (1 << SDRAM_TM_OFFS) +#define SDRAM_DLL_OFFS 8 +#define SDRAM_DLL_MASK (1 << SDRAM_DLL_OFFS) +#define SDRAM_DLL_NORMAL (0 << SDRAM_DLL_OFFS) +#define SDRAM_DLL_RESET (1 << SDRAM_DLL_OFFS) +#define SDRAM_WR_OFFS 9 +#define SDRAM_WR_MAX 7 +#define SDRAM_WR_MASK (SDRAM_WR_MAX << SDRAM_WR_OFFS) +#define SDRAM_WR_2_CYC (1 << SDRAM_WR_OFFS) +#define SDRAM_WR_3_CYC (2 << SDRAM_WR_OFFS) +#define SDRAM_WR_4_CYC (3 << SDRAM_WR_OFFS) +#define SDRAM_WR_5_CYC (4 << SDRAM_WR_OFFS) +#define SDRAM_WR_6_CYC (5 << SDRAM_WR_OFFS) +#define SDRAM_PD_OFFS 12 +#define SDRAM_PD_MASK (1 << SDRAM_PD_OFFS) +#define SDRAM_PD_FAST_EXIT (0 << SDRAM_PD_OFFS) +#define SDRAM_PD_SLOW_EXIT (1 << SDRAM_PD_OFFS) + +/* DDR SDRAM Extended Mode register (DSEMR) */ +#define SDRAM_EXTENDED_MODE_REG (DRAM_BASE + 0x1420) +#define DSEMR_DLL_ENABLE 0 +#define DSEMR_DLL_DISABLE 1 +#define DSEMR_DS_OFFS 1 +#define DSEMR_DS_MASK (1 << DSEMR_DS_OFFS) +#define DSEMR_DS_NORMAL (0 << DSEMR_DS_OFFS) +#define DSEMR_DS_REDUCED (1 << DSEMR_DS_OFFS) +#define DSEMR_QOFF_OUTPUT_BUFF_EN (0 << 12) +#define DSEMR_RTT0_OFFS 2 +#define DSEMR_RTT1_OFFS 6 +#define DSEMR_RTT_ODT_DISABLE ((0 << DSEMR_RTT0_OFFS)||(0 << DSEMR_RTT1_OFFS)) +#define DSEMR_RTT_ODT_75_OHM ((1 << DSEMR_RTT0_OFFS)||(0 << DSEMR_RTT1_OFFS)) +#define DSEMR_RTT_ODT_150_OHM ((0 << DSEMR_RTT0_OFFS)||(1 << DSEMR_RTT1_OFFS)) +#define DSEMR_RTT_ODT_50_OHM ((1 << DSEMR_RTT0_OFFS)||(1 << DSEMR_RTT1_OFFS)) +#define DSEMR_DQS_OFFS 10 +#define DSEMR_DQS_MASK (1 << DSEMR_DQS_OFFS) +#define DSEMR_DQS_DIFFERENTIAL (0 << DSEMR_DQS_OFFS) +#define DSEMR_DQS_SINGLE_ENDED (1 << DSEMR_DQS_OFFS) +#define DSEMR_RDQS_ENABLE (1 << 11) +#define DSEMR_QOFF_OUTPUT_BUFF_EN (0 << 12) +#define DSEMR_QOFF_OUTPUT_BUFF_DIS (1 << 12) + +/* DDR SDRAM Operation Control Register */ +#define SDRAM_OPERATION_CTRL_REG (DRAM_BASE + 0x142c) + +/* Dunit FTDLL Configuration Register */ +#define SDRAM_FTDLL_CONFIG_LEFT_REG (DRAM_BASE + 0x1484) +#define SDRAM_FTDLL_CONFIG_RIGHT_REG (DRAM_BASE + 0x161C) +#define SDRAM_FTDLL_CONFIG_UP_REG (DRAM_BASE + 0x1620) + +/* Pads Calibration register */ +#define SDRAM_ADDR_CTRL_PADS_CAL_REG (DRAM_BASE + 0x14c0) +#define SDRAM_DATA_PADS_CAL_REG (DRAM_BASE + 0x14c4) +#define SDRAM_DRVN_OFFS 0 +#define SDRAM_DRVN_MASK (0x3F << SDRAM_DRVN_OFFS) +#define SDRAM_DRVP_OFFS 6 +#define SDRAM_DRVP_MASK (0x3F << SDRAM_DRVP_OFFS) +#define SDRAM_PRE_DRIVER_STRENGTH_OFFS 12 +#define SDRAM_PRE_DRIVER_STRENGTH_MASK (3 << SDRAM_PRE_DRIVER_STRENGTH_OFFS) +#define SDRAM_TUNE_EN BIT16 +#define SDRAM_LOCKN_OFFS 17 +#define SDRAM_LOCKN_MAKS (0x3F << SDRAM_LOCKN_OFFS) +#define SDRAM_LOCKP_OFFS 23 +#define SDRAM_LOCKP_MAKS (0x3F << SDRAM_LOCKP_OFFS) +#define SDRAM_WR_EN (1 << 31) + +/* DDR2 SDRAM ODT Control (Low) Register (DSOCLR) */ +#define DDR2_SDRAM_ODT_CTRL_LOW_REG (DRAM_BASE + 0x1494) +#define DSOCLR_ODT_RD_OFFS(odtNum) (odtNum * 4) +#define DSOCLR_ODT_RD_MASK(odtNum) (0xf << DSOCLR_ODT_RD_OFFS(odtNum)) +#define DSOCLR_ODT_RD(odtNum, bank) ((1 << bank) << DSOCLR_ODT_RD_OFFS(odtNum)) +#define DSOCLR_ODT_WR_OFFS(odtNum) (16 + (odtNum * 4)) +#define DSOCLR_ODT_WR_MASK(odtNum) (0xf << DSOCLR_ODT_WR_OFFS(odtNum)) +#define DSOCLR_ODT_WR(odtNum, bank) ((1 << bank) << DSOCLR_ODT_WR_OFFS(odtNum)) + +/* DDR2 SDRAM ODT Control (High) Register (DSOCHR) */ +#define DDR2_SDRAM_ODT_CTRL_HIGH_REG (DRAM_BASE + 0x1498) +/* Optional control values to DSOCHR_ODT_EN macro */ +#define DDR2_ODT_CTRL_DUNIT 0 +#define DDR2_ODT_CTRL_NEVER 1 +#define DDR2_ODT_CTRL_ALWAYS 3 +#define DSOCHR_ODT_EN_OFFS(odtNum) (odtNum * 2) +#define DSOCHR_ODT_EN_MASK(odtNum) (0x3 << DSOCHR_ODT_EN_OFFS(odtNum)) +#define DSOCHR_ODT_EN(odtNum, ctrl) (ctrl << DSOCHR_ODT_EN_OFFS(odtNum)) + +/* DDR2 Dunit ODT Control Register (DDOCR)*/ +#define DDR2_DUNIT_ODT_CONTROL_REG (DRAM_BASE + 0x149c) +#define DDOCR_ODT_RD_OFFS 0 +#define DDOCR_ODT_RD_MASK (0xf << DDOCR_ODT_RD_OFFS) +#define DDOCR_ODT_RD(bank) ((1 << bank) << DDOCR_ODT_RD_OFFS) +#define DDOCR_ODT_WR_OFFS 4 +#define DDOCR_ODT_WR_MASK (0xf << DDOCR_ODT_WR_OFFS) +#define DDOCR_ODT_WR(bank) ((1 << bank) << DDOCR_ODT_WR_OFFS) +#define DSOCR_ODT_EN_OFFS 8 +#define DSOCR_ODT_EN_MASK (0x3 << DSOCR_ODT_EN_OFFS) +/* For ctrl parameters see DDR2 SDRAM ODT Control (High) Register (0x1498) above. */ +#define DSOCR_ODT_EN(ctrl) (ctrl << DSOCR_ODT_EN_OFFS) +#define DSOCR_ODT_SEL_DISABLE 0 +#define DSOCR_ODT_SEL_75_OHM 2 +#define DSOCR_ODT_SEL_150_OHM 1 +#define DSOCR_ODT_SEL_50_OHM 3 +#define DSOCR_DQ_ODT_SEL_OFFS 10 +#define DSOCR_DQ_ODT_SEL_MASK (0x3 << DSOCR_DQ_ODT_SEL_OFFS) +#define DSOCR_DQ_ODT_SEL(odtSel) (odtSel << DSOCR_DQ_ODT_SEL_OFFS) +#define DSOCR_ST_ODT_SEL_OFFS 12 +#define DSOCR_ST_ODT_SEL_MASK (0x3 << DSOCR_ST_ODT_SEL_OFFS) +#define DSOCR_ST_ODT_SEL(odtSel) (odtSel << DSOCR_ST_ODT_SEL_OFFS) +#define DSOCR_ST_ODT_EN (1 << 14) + +/* DDR SDRAM Initialization Control Register (DSICR) */ +#define DDR_SDRAM_INIT_CTRL_REG (DRAM_BASE + 0x1480) +#define DSICR_INIT_EN (1 << 0) +#define DSICR_T200_SET (1 << 8) + +/* sdram extended mode2 register (SEM2R) */ +#define SDRAM_EXTENDED_MODE2_REG (DRAM_BASE + 0x148C) +#define SEM2R_EMRS2_DDR2_OFFS 0 +#define SEM2R_EMRS2_DDR2_MASK (0x7FFF << SEM2R_EMRS2_DDR2_OFFS) + +/* sdram extended mode3 register (SEM3R) */ +#define SDRAM_EXTENDED_MODE3_REG (DRAM_BASE + 0x1490) +#define SEM3R_EMRS3_DDR2_OFFS 0 +#define SEM3R_EMRS3_DDR2_MASK (0x7FFF << SEM3R_EMRS3_DDR2_OFFS) + +/* sdram error registers */ +#define SDRAM_ERROR_CAUSE_REG (DRAM_BASE + 0x14d0) +#define SDRAM_ERROR_MASK_REG (DRAM_BASE + 0x14d4) +#define SDRAM_ERROR_DATA_LOW_REG (DRAM_BASE + 0x1444) +#define SDRAM_ERROR_DATA_HIGH_REG (DRAM_BASE + 0x1440) +#define SDRAM_ERROR_ADDR_REG (DRAM_BASE + 0x1450) +#define SDRAM_ERROR_ECC_REG (DRAM_BASE + 0x1448) +#define SDRAM_CALC_ECC_REG (DRAM_BASE + 0x144c) +#define SDRAM_ECC_CONTROL_REG (DRAM_BASE + 0x1454) +#define SDRAM_SINGLE_BIT_ERR_CNTR_REG (DRAM_BASE + 0x1458) +#define SDRAM_DOUBLE_BIT_ERR_CNTR_REG (DRAM_BASE + 0x145c) + +/* SDRAM Error Cause Register (SECR) */ +#define SECR_SINGLE_BIT_ERR BIT0 +#define SECR_DOUBLE_BIT_ERR BIT1 +#define SECR_DATA_PATH_PARITY_ERR BIT2 +/* SDRAM Error Address Register (SEAR) */ +#define SEAR_ERR_TYPE_OFFS 0 +#define SEAR_ERR_TYPE_MASK (1 << SEAR_ERR_TYPE_OFFS) +#define SEAR_ERR_TYPE_SINGLE 0 +#define SEAR_ERR_TYPE_DOUBLE (1 << SEAR_ERR_TYPE_OFFS) +#define SEAR_ERR_CS_OFFS 1 +#define SEAR_ERR_CS_MASK (3 << SEAR_ERR_CS_OFFS) +#define SEAR_ERR_CS(csNum) (csNum << SEAR_ERR_CS_OFFS) +#define SEAR_ERR_ADDR_OFFS 3 +#define SEAR_ERR_ADDR_MASK (0x1FFFFFFF << SEAR_ERR_ADDR_OFFS) + +/* SDRAM ECC Control Register (SECR) */ +#define SECR_FORCEECC_OFFS 0 +#define SECR_FORCEECC_MASK (0xFF << SECR_FORCEECC_OFFS) +#define SECR_FORCEEN_OFFS 8 +#define SECR_FORCEEN_MASK (1 << SECR_FORCEEN_OFFS) +#define SECR_ECC_CALC_MASK (0 << SECR_FORCEEN_OFFS) +#define SECR_ECC_USER_MASK (1 << SECR_FORCEEN_OFFS) +#define SECR_PERRPROP_EN BIT9 +#define SECR_CNTMODE_OFFS 10 +#define SECR_CNTMODE_MASK (1 << SECR_CNTMODE_OFFS) +#define SECR_ALL_IN_CS0 (0 << SECR_CNTMODE_OFFS) +#define SECR_NORMAL_COUNTER (1 << SECR_CNTMODE_OFFS) +#define SECR_THRECC_OFFS 16 +#define SECR_THRECC_MAX 0xFF +#define SECR_THRECC_MASK (SECR_THRECC_MAX << SECR_THRECC_OFFS) +#define SECR_THRECC(threshold) (threshold << SECR_THRECC_OFFS) + + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __INCmvDramIfRegsh */ diff --git a/target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfStaticInit.h b/target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfStaticInit.h new file mode 100644 index 000000000..f3bf83b4e --- /dev/null +++ b/target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfStaticInit.h @@ -0,0 +1,179 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +#ifndef __INCmvDramIfStaticInith +#define __INCmvDramIfStaticInith + +#ifdef MV_STATIC_DRAM_ON_BOARD +#define STATIC_DRAM_BANK_1 +#undef STATIC_DRAM_BANK_2 +#undef STATIC_DRAM_BANK_3 +#undef STATIC_DRAM_BANK_4 + + +#ifdef MV_DIMM_TS256MLQ72V5U +#define STATIC_DRAM_BANK_2 +#define STATIC_DRAM_BANK_3 +#undef STATIC_DRAM_BANK_4 + +#define STATIC_SDRAM_CONFIG_REG 0x4724481A /* offset 0x1400 - DMA reg-0xf1000814 */ +#define STATIC_SDRAM_DUNIT_CTRL_REG 0x37707450 /* offset 0x1404 - DMA reg-0xf100081c */ +#define STATIC_SDRAM_TIMING_CTRL_LOW_REG 0x11A13330 /* offset 0x1408 - DMA reg-0xf1000824 */ +#define STATIC_SDRAM_TIMING_CTRL_HIGH_REG 0x00000601 /* offset 0x140c - DMA reg-0xf1000828 */ +#define STATIC_SDRAM_ADDR_CTRL_REG 0x00001CB2 /* offset 0x1410 - DMA reg-0xf1000820 */ +#define STATIC_SDRAM_MODE_REG 0x00000642 /* offset 0x141c - DMA reg-0xf1000818 */ +#define STATIC_SDRAM_ODT_CTRL_LOW 0x030C030C /* 0x1494 */ +#define STATIC_SDRAM_ODT_CTRL_HI 0x00000000 /* 0x1498 */ +#define STATIC_SDRAM_DUNIT_ODT_CTRL 0x0000740F /* 0x149c */ +#define STATIC_SDRAM_EXT_MODE 0x00000404 /* 0x1420 */ +#define STATIC_SDRAM_DDR2_TIMING_LO 0x00074410 /* 0x1428 */ +#define STATIC_SDRAM_DDR2_TIMING_HI 0x00007441 /* 0x147C */ + +#define STATIC_SDRAM_RANK0_SIZE_DIMM0 0x3FFF /* size bank0 dimm0 - DMA reg-0xf1000810 */ +#define STATIC_SDRAM_RANK1_SIZE_DIMM0 0x3FFF /* size bank1 dimm0 */ +#define STATIC_SDRAM_RANK0_SIZE_DIMM1 0x3FFF /* size bank0 dimm1 */ +#define STATIC_SDRAM_RANK1_SIZE_DIMM1 0x0 /* size bank1 dimm1 */ + +#endif /* TS256MLQ72V5U */ + + +#ifdef MV_MT9VDDT3272AG +/* one DIMM 256M */ +#define STATIC_SDRAM_CONFIG_REG 0x5820040d /* offset 0x1400 - DMA reg-0xf1000814 */ +#define STATIC_SDRAM_DUNIT_CTRL_REG 0xC4000540 /* offset 0x1404 - DMA reg-0xf100081c */ +#define STATIC_SDRAM_TIMING_CTRL_LOW_REG 0x01602220 /* offset 0x1408 - DMA reg-0xf1000824 */ +#define STATIC_SDRAM_TIMING_CTRL_HIGH_REG 0x0000000b /* offset 0x140c - DMA reg-0xf1000828 */ +#define STATIC_SDRAM_ADDR_CTRL_REG 0x00000012 /* offset 0x1410 - DMA reg-0xf1000820 */ +#define STATIC_SDRAM_MODE_REG 0x00000062 /* offset 0x141c - DMA reg-0xf1000818 */ +#define STATIC_SDRAM_RANK0_SIZE_DIMM0 0x0fff /* size bank0 dimm0 - DMA reg-0xf1000810 */ +#define STATIC_SDRAM_RANK0_SIZE_DIMM1 0x0 /* size bank0 dimm1 */ + +#endif /* MV_MT9VDDT3272AG */ + + + +#ifdef MV_D27RB12P +/* +Two DIMM 512M + ECC enabled, Registered DIMM CAS Latency 2.5 +*/ + +#define STATIC_SDRAM_CONFIG_REG 0x6826081E /* offset 0x1400 - DMA reg-0xf1000814 */ +#define STATIC_SDRAM_DUNIT_CTRL_REG 0xC5000540 /* offset 0x1404 - DMA reg-0xf100081c */ +#define STATIC_SDRAM_TIMING_CTRL_LOW_REG 0x01501220 /* offset 0x1408 - DMA reg-0xf1000824 */ +#define STATIC_SDRAM_TIMING_CTRL_HIGH_REG 0x00000009 /* offset 0x140c - DMA reg-0xf1000828 */ +#define STATIC_SDRAM_ADDR_CTRL_REG 0x00000012 /* offset 0x1410 - DMA reg-0xf1000820 */ +#define STATIC_SDRAM_MODE_REG 0x00000062 /* offset 0x141c - DMA reg-0xf1000818 */ +#define STATIC_SDRAM_RANK0_SIZE_DIMM0 0x0FFF /* size bank0 dimm0 - DMA reg-0xf1000810 */ +#define STATIC_SDRAM_RANK0_SIZE_DIMM1 0x0FFF /* size bank0 dimm1 */ + +#define STATIC_DRAM_BANK_2 + +#define STATIC_DRAM_BANK_3 +#define STATIC_DRAM_BANK_4 + +#endif /* mv_D27RB12P */ + +#ifdef RD_MV645XX + +#define STATIC_MEM_TYPE MEM_TYPE_DDR2 +#define STATIC_DIMM_INFO_BANK0_SIZE 256 +/* DDR2 boards 256 MB*/ + +#define STATIC_SDRAM_RANK0_SIZE_DIMM0 0x00000fff /* size bank0 dimm0 - DMA reg-0xf1000810 */ +#define STATIC_SDRAM_CONFIG_REG 0x07190618 +#define STATIC_SDRAM_MODE_REG 0x00000432 +#define STATIC_SDRAM_DUNIT_CTRL_REG 0xf4a03440 +#define STATIC_SDRAM_ADDR_CTRL_REG 0x00000022 +#define STATIC_SDRAM_TIMING_CTRL_LOW_REG 0x11712220 +#define STATIC_SDRAM_TIMING_CTRL_HIGH_REG 0x00000504 +#define STATIC_SDRAM_ODT_CTRL_LOW 0x84210000 +#define STATIC_SDRAM_ODT_CTRL_HI 0x00000000 +#define STATIC_SDRAM_DUNIT_ODT_CTRL 0x0000780f +#define STATIC_SDRAM_EXT_MODE 0x00000440 +#define STATIC_SDRAM_DDR2_TIMING_LO 0x00063300 +#define STATIC_SDRAM_DDR2_TIMING_HI 0x00006330 +#endif /* RD_MV645XX */ + +#if MV_DIMM_M3783354CZ3_CE6 + +#define STATIC_SDRAM_RANK0_SIZE_DIMM0 0x00000FFF /* 0x2010 size bank0 dimm0 - DMA reg-0xf1000810 */ +#define STATIC_SDRAM_CONFIG_REG 0x07190618 /* 0x1400 */ +#define STATIC_SDRAM_MODE_REG 0x00000432 /* 0x141c */ +#define STATIC_SDRAM_DUNIT_CTRL_REG 0xf4a03440 /* 0x1404 */ +#define STATIC_SDRAM_ADDR_CTRL_REG 0x00000022 /* 0x1410 */ +#define STATIC_SDRAM_TIMING_CTRL_LOW_REG 0x11712220 /* 0x1408 */ +#define STATIC_SDRAM_TIMING_CTRL_HIGH_REG 0x00000504 /* 0x140c */ +#define STATIC_SDRAM_ODT_CTRL_LOW 0x84210000 /* 0x1494 */ +#define STATIC_SDRAM_ODT_CTRL_HI 0x00000000 /* 0x1498 */ +#define STATIC_SDRAM_DUNIT_ODT_CTRL 0x0000780f /* 0x149c */ +#define STATIC_SDRAM_EXT_MODE 0x00000440 /* 0x1420 */ +#define STATIC_SDRAM_DDR2_TIMING_LO 0x00063300 /* 0x1428 */ +#define STATIC_SDRAM_DDR2_TIMING_HI 0x00006330 /* 0x147C */ + +#endif /* MV_DIMM_M3783354CZ3_CE6 */ + +#endif /* MV_STATIC_DRAM_ON_BOARD */ +#endif /* __INCmvDramIfStaticInith */ + diff --git a/target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/spd/mvSpd.c b/target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/spd/mvSpd.c new file mode 100644 index 000000000..7a26f9059 --- /dev/null +++ b/target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/spd/mvSpd.c @@ -0,0 +1,1474 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#include "ddr2/spd/mvSpd.h" +#include "boardEnv/mvBoardEnvLib.h" + +/* #define MV_DEBUG */ +#ifdef MV_DEBUG +#define DB(x) x +#else +#define DB(x) +#endif + +static MV_VOID cpyDimm2BankInfo(MV_DIMM_INFO *pDimmInfo, + MV_DRAM_BANK_INFO *pBankInfo); +static MV_U32 cas2ps(MV_U8 spd_byte); +/******************************************************************************* +* mvDramBankGet - Get the DRAM bank paramters. +* +* DESCRIPTION: +* This function retrieves DRAM bank parameters as described in +* DRAM_BANK_INFO struct to the controller DRAM unit. In case the board +* has its DRAM on DIMMs it will use its EEPROM to extract SPD data +* from it. Otherwise, if the DRAM is soldered on board, the function +* should insert its bank information into MV_DRAM_BANK_INFO struct. +* +* INPUT: +* bankNum - Board DRAM bank number. +* +* OUTPUT: +* pBankInfo - DRAM bank information struct. +* +* RETURN: +* MV_FAIL - Bank parameters could not be read. +* +*******************************************************************************/ +MV_STATUS mvDramBankInfoGet(MV_U32 bankNum, MV_DRAM_BANK_INFO *pBankInfo) +{ + MV_DIMM_INFO dimmInfo; + + DB(mvOsPrintf("Dram: mvDramBankInfoGet bank %d\n", bankNum)); + /* zero pBankInfo structure */ + + if((NULL == pBankInfo) || (bankNum >= MV_DRAM_MAX_CS )) + { + DB(mvOsPrintf("Dram: mvDramBankInfoGet bad params \n")); + return MV_BAD_PARAM; + } + memset(pBankInfo, 0, sizeof(*pBankInfo)); + + if ( MV_OK != dimmSpdGet((MV_U32)(bankNum/2), &dimmInfo)) + { + DB(mvOsPrintf("Dram: ERR dimmSpdGet failed to get dimm info \n")); + return MV_FAIL; + } + if ((dimmInfo.numOfModuleBanks == 1) && ((bankNum % 2) == 1)) + { + DB(mvOsPrintf("Dram: ERR dimmSpdGet. Can't find DIMM bank 2 \n")); + return MV_FAIL; + } + /* convert Dimm info to Bank info */ + cpyDimm2BankInfo(&dimmInfo, pBankInfo); + return MV_OK; +} + +/******************************************************************************* +* cpyDimm2BankInfo - Convert a Dimm info struct into a bank info struct. +* +* DESCRIPTION: +* Convert a Dimm info struct into a bank info struct. +* +* INPUT: +* pDimmInfo - DIMM information structure. +* +* OUTPUT: +* pBankInfo - DRAM bank information struct. +* +* RETURN: +* None. +* +*******************************************************************************/ +static MV_VOID cpyDimm2BankInfo(MV_DIMM_INFO *pDimmInfo, + MV_DRAM_BANK_INFO *pBankInfo) +{ + pBankInfo->memoryType = pDimmInfo->memoryType; + + /* DIMM dimensions */ + pBankInfo->numOfRowAddr = pDimmInfo->numOfRowAddr; + pBankInfo->numOfColAddr = pDimmInfo->numOfColAddr; + pBankInfo->dataWidth = pDimmInfo->dataWidth; + pBankInfo->errorCheckType = pDimmInfo->errorCheckType; + pBankInfo->sdramWidth = pDimmInfo->sdramWidth; + pBankInfo->errorCheckDataWidth = pDimmInfo->errorCheckDataWidth; + pBankInfo->numOfBanksOnEachDevice = pDimmInfo->numOfBanksOnEachDevice; + pBankInfo->suportedCasLatencies = pDimmInfo->suportedCasLatencies; + pBankInfo->refreshInterval = pDimmInfo->refreshInterval; + + /* DIMM timing parameters */ + pBankInfo->minCycleTimeAtMaxCasLatPs = pDimmInfo->minCycleTimeAtMaxCasLatPs; + pBankInfo->minCycleTimeAtMaxCasLatMinus1Ps = + pDimmInfo->minCycleTimeAtMaxCasLatMinus1Ps; + pBankInfo->minCycleTimeAtMaxCasLatMinus2Ps = + pDimmInfo->minCycleTimeAtMaxCasLatMinus2Ps; + + pBankInfo->minRowPrechargeTime = pDimmInfo->minRowPrechargeTime; + pBankInfo->minRowActiveToRowActive = pDimmInfo->minRowActiveToRowActive; + pBankInfo->minRasToCasDelay = pDimmInfo->minRasToCasDelay; + pBankInfo->minRasPulseWidth = pDimmInfo->minRasPulseWidth; + pBankInfo->minWriteRecoveryTime = pDimmInfo->minWriteRecoveryTime; + pBankInfo->minWriteToReadCmdDelay = pDimmInfo->minWriteToReadCmdDelay; + pBankInfo->minReadToPrechCmdDelay = pDimmInfo->minReadToPrechCmdDelay; + pBankInfo->minRefreshToActiveCmd = pDimmInfo->minRefreshToActiveCmd; + + /* Parameters calculated from the extracted DIMM information */ + pBankInfo->size = pDimmInfo->size/pDimmInfo->numOfModuleBanks; + pBankInfo->deviceDensity = pDimmInfo->deviceDensity; + pBankInfo->numberOfDevices = pDimmInfo->numberOfDevices / + pDimmInfo->numOfModuleBanks; + + /* DIMM attributes (MV_TRUE for yes) */ + + if ((pDimmInfo->memoryType == MEM_TYPE_SDRAM) || + (pDimmInfo->memoryType == MEM_TYPE_DDR1) ) + { + if (pDimmInfo->dimmAttributes & BIT1) + pBankInfo->registeredAddrAndControlInputs = MV_TRUE; + else + pBankInfo->registeredAddrAndControlInputs = MV_FALSE; + } + else /* pDimmInfo->memoryType == MEM_TYPE_DDR2 */ + { + if (pDimmInfo->dimmTypeInfo & (BIT0 | BIT4)) + pBankInfo->registeredAddrAndControlInputs = MV_TRUE; + else + pBankInfo->registeredAddrAndControlInputs = MV_FALSE; + } + + return; +} +/******************************************************************************* +* dimmSpdCpy - Cpy SPD parameters from dimm 0 to dimm 1. +* +* DESCRIPTION: +* Read the DIMM SPD parameters from dimm 0 into dimm 1 SPD. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_TRUE if function could read DIMM parameters, MV_FALSE otherwise. +* +*******************************************************************************/ +MV_STATUS dimmSpdCpy(MV_VOID) +{ + MV_U32 i; + MV_U32 spdChecksum; + + MV_TWSI_SLAVE twsiSlave; + MV_U8 data[SPD_SIZE]; + + /* zero dimmInfo structure */ + memset(data, 0, SPD_SIZE); + + /* read the dimm eeprom */ + DB(mvOsPrintf("DRAM: Read Dimm eeprom\n")); + twsiSlave.slaveAddr.address = MV_BOARD_DIMM0_I2C_ADDR; + twsiSlave.slaveAddr.type = ADDR7_BIT; + twsiSlave.validOffset = MV_TRUE; + twsiSlave.offset = 0; + twsiSlave.moreThen256 = MV_FALSE; + + if( MV_OK != mvTwsiRead (MV_BOARD_DIMM_I2C_CHANNEL, &twsiSlave, data, SPD_SIZE) ) + { + DB(mvOsPrintf("DRAM: ERR. no DIMM in dimmNum 0\n")); + return MV_FAIL; + } + DB(puts("DRAM: Reading dimm info succeded.\n")); + + /* calculate SPD checksum */ + spdChecksum = 0; + + for(i = 0 ; i <= 62 ; i++) + { + spdChecksum += data[i]; + } + + if ((spdChecksum & 0xff) != data[63]) + { + DB(mvOsPrintf("DRAM: Warning. Wrong SPD Checksum %2x, expValue=%2x\n", + (MV_U32)(spdChecksum & 0xff), data[63])); + } + else + { + DB(mvOsPrintf("DRAM: SPD Checksum ok!\n")); + } + + /* copy the SPD content 1:1 into the DIMM 1 SPD */ + twsiSlave.slaveAddr.address = MV_BOARD_DIMM1_I2C_ADDR; + twsiSlave.slaveAddr.type = ADDR7_BIT; + twsiSlave.validOffset = MV_TRUE; + twsiSlave.offset = 0; + twsiSlave.moreThen256 = MV_FALSE; + + for(i = 0 ; i < SPD_SIZE ; i++) + { + twsiSlave.offset = i; + if( MV_OK != mvTwsiWrite (MV_BOARD_DIMM_I2C_CHANNEL, &twsiSlave, &data[i], 1) ) + { + mvOsPrintf("DRAM: ERR. no DIMM in dimmNum 1 byte %d \n",i); + return MV_FAIL; + } + mvOsDelay(5); + } + + DB(puts("DRAM: Reading dimm info succeded.\n")); + return MV_OK; +} + +/******************************************************************************* +* dimmSpdGet - Get the SPD parameters. +* +* DESCRIPTION: +* Read the DIMM SPD parameters into given struct parameter. +* +* INPUT: +* dimmNum - DIMM number. See MV_BOARD_DIMM_NUM enumerator. +* +* OUTPUT: +* pDimmInfo - DIMM information structure. +* +* RETURN: +* MV_TRUE if function could read DIMM parameters, MV_FALSE otherwise. +* +*******************************************************************************/ +MV_STATUS dimmSpdGet(MV_U32 dimmNum, MV_DIMM_INFO *pDimmInfo) +{ + MV_U32 i; + MV_U32 density = 1; + MV_U32 spdChecksum; + + MV_TWSI_SLAVE twsiSlave; + MV_U8 data[SPD_SIZE]; + + if((NULL == pDimmInfo)|| (dimmNum >= MAX_DIMM_NUM)) + { + DB(mvOsPrintf("Dram: mvDramBankInfoGet bad params \n")); + return MV_BAD_PARAM; + } + + /* zero dimmInfo structure */ + memset(data, 0, SPD_SIZE); + + /* read the dimm eeprom */ + DB(mvOsPrintf("DRAM: Read Dimm eeprom\n")); + twsiSlave.slaveAddr.address = (dimmNum == 0) ? + MV_BOARD_DIMM0_I2C_ADDR : MV_BOARD_DIMM1_I2C_ADDR; + twsiSlave.slaveAddr.type = ADDR7_BIT; + twsiSlave.validOffset = MV_TRUE; + twsiSlave.offset = 0; + twsiSlave.moreThen256 = MV_FALSE; + + if( MV_OK != mvTwsiRead (MV_BOARD_DIMM_I2C_CHANNEL, &twsiSlave, data, SPD_SIZE) ) + { + DB(mvOsPrintf("DRAM: ERR. no DIMM in dimmNum %d \n", dimmNum)); + return MV_FAIL; + } + DB(puts("DRAM: Reading dimm info succeded.\n")); + + /* calculate SPD checksum */ + spdChecksum = 0; + + for(i = 0 ; i <= 62 ; i++) + { + spdChecksum += data[i]; + } + + if ((spdChecksum & 0xff) != data[63]) + { + DB(mvOsPrintf("DRAM: Warning. Wrong SPD Checksum %2x, expValue=%2x\n", + (MV_U32)(spdChecksum & 0xff), data[63])); + } + else + { + DB(mvOsPrintf("DRAM: SPD Checksum ok!\n")); + } + + /* copy the SPD content 1:1 into the dimmInfo structure*/ + for(i = 0 ; i < SPD_SIZE ; i++) + { + pDimmInfo->spdRawData[i] = data[i]; + DB(mvOsPrintf("SPD-EEPROM Byte %3d = %3x (%3d)\n",i, data[i], data[i])); + } + + DB(mvOsPrintf("DRAM SPD Information:\n")); + + /* Memory type (DDR / SDRAM) */ + switch (data[DIMM_MEM_TYPE]) + { + case (DIMM_MEM_TYPE_SDRAM): + pDimmInfo->memoryType = MEM_TYPE_SDRAM; + DB(mvOsPrintf("DRAM Memeory type SDRAM\n")); + break; + case (DIMM_MEM_TYPE_DDR1): + pDimmInfo->memoryType = MEM_TYPE_DDR1; + DB(mvOsPrintf("DRAM Memeory type DDR1\n")); + break; + case (DIMM_MEM_TYPE_DDR2): + pDimmInfo->memoryType = MEM_TYPE_DDR2; + DB(mvOsPrintf("DRAM Memeory type DDR2\n")); + break; + default: + mvOsPrintf("ERROR: Undefined memory type!\n"); + return MV_ERROR; + } + + + /* Number Of Row Addresses */ + pDimmInfo->numOfRowAddr = data[DIMM_ROW_NUM]; + DB(mvOsPrintf("DRAM numOfRowAddr[3] %d\n",pDimmInfo->numOfRowAddr)); + + /* Number Of Column Addresses */ + pDimmInfo->numOfColAddr = data[DIMM_COL_NUM]; + DB(mvOsPrintf("DRAM numOfColAddr[4] %d\n",pDimmInfo->numOfColAddr)); + + /* Number Of Module Banks */ + pDimmInfo->numOfModuleBanks = data[DIMM_MODULE_BANK_NUM]; + DB(mvOsPrintf("DRAM numOfModuleBanks[5] 0x%x\n", + pDimmInfo->numOfModuleBanks)); + + /* Number of module banks encoded differently for DDR2 */ + if (pDimmInfo->memoryType == MEM_TYPE_DDR2) + pDimmInfo->numOfModuleBanks = (pDimmInfo->numOfModuleBanks & 0x7)+1; + + /* Data Width */ + pDimmInfo->dataWidth = data[DIMM_DATA_WIDTH]; + DB(mvOsPrintf("DRAM dataWidth[6] 0x%x\n", pDimmInfo->dataWidth)); + + /* Minimum Cycle Time At Max CasLatancy */ + pDimmInfo->minCycleTimeAtMaxCasLatPs = cas2ps(data[DIMM_MIN_CC_AT_MAX_CAS]); + + /* Error Check Type */ + pDimmInfo->errorCheckType = data[DIMM_ERR_CHECK_TYPE]; + DB(mvOsPrintf("DRAM errorCheckType[11] 0x%x\n", + pDimmInfo->errorCheckType)); + + /* Refresh Interval */ + pDimmInfo->refreshInterval = data[DIMM_REFRESH_INTERVAL]; + DB(mvOsPrintf("DRAM refreshInterval[12] 0x%x\n", + pDimmInfo->refreshInterval)); + + /* Sdram Width */ + pDimmInfo->sdramWidth = data[DIMM_SDRAM_WIDTH]; + DB(mvOsPrintf("DRAM sdramWidth[13] 0x%x\n",pDimmInfo->sdramWidth)); + + /* Error Check Data Width */ + pDimmInfo->errorCheckDataWidth = data[DIMM_ERR_CHECK_DATA_WIDTH]; + DB(mvOsPrintf("DRAM errorCheckDataWidth[14] 0x%x\n", + pDimmInfo->errorCheckDataWidth)); + + /* Burst Length Supported */ + /* SDRAM/DDR1: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + burst length = * Page | TBD | TBD | TBD | 8 | 4 | 2 | 1 * + *********************************************************/ + /* DDR2: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + burst length = * Page | TBD | TBD | TBD | 8 | 4 | TBD | TBD * + *********************************************************/ + + pDimmInfo->burstLengthSupported = data[DIMM_BURST_LEN_SUP]; + DB(mvOsPrintf("DRAM burstLengthSupported[16] 0x%x\n", + pDimmInfo->burstLengthSupported)); + + /* Number Of Banks On Each Device */ + pDimmInfo->numOfBanksOnEachDevice = data[DIMM_DEV_BANK_NUM]; + DB(mvOsPrintf("DRAM numOfBanksOnEachDevice[17] 0x%x\n", + pDimmInfo->numOfBanksOnEachDevice)); + + /* Suported Cas Latencies */ + + /* SDRAM: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + CAS = * TBD | 7 | 6 | 5 | 4 | 3 | 2 | 1 * + ********************************************************/ + + /* DDR 1: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + CAS = * TBD | 4 | 3.5 | 3 | 2.5 | 2 | 1.5 | 1 * + *********************************************************/ + + /* DDR 2: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + CAS = * TBD | TBD | 5 | 4 | 3 | 2 | TBD | TBD * + *********************************************************/ + + pDimmInfo->suportedCasLatencies = data[DIMM_SUP_CAL]; + DB(mvOsPrintf("DRAM suportedCasLatencies[18] 0x%x\n", + pDimmInfo->suportedCasLatencies)); + + /* For DDR2 only, get the DIMM type information */ + if (pDimmInfo->memoryType == MEM_TYPE_DDR2) + { + pDimmInfo->dimmTypeInfo = data[DIMM_DDR2_TYPE_INFORMATION]; + DB(mvOsPrintf("DRAM dimmTypeInfo[20] (DDR2) 0x%x\n", + pDimmInfo->dimmTypeInfo)); + } + + /* SDRAM Modules Attributes */ + pDimmInfo->dimmAttributes = data[DIMM_BUF_ADDR_CONT_IN]; + DB(mvOsPrintf("DRAM dimmAttributes[21] 0x%x\n", + pDimmInfo->dimmAttributes)); + + /* Minimum Cycle Time At Max CasLatancy Minus 1*/ + pDimmInfo->minCycleTimeAtMaxCasLatMinus1Ps = + cas2ps(data[DIMM_MIN_CC_AT_MAX_CAS_MINUS1]); + + /* Minimum Cycle Time At Max CasLatancy Minus 2*/ + pDimmInfo->minCycleTimeAtMaxCasLatMinus2Ps = + cas2ps(data[DIMM_MIN_CC_AT_MAX_CAS_MINUS2]); + + pDimmInfo->minRowPrechargeTime = data[DIMM_MIN_ROW_PRECHARGE_TIME]; + DB(mvOsPrintf("DRAM minRowPrechargeTime[27] 0x%x\n", + pDimmInfo->minRowPrechargeTime)); + pDimmInfo->minRowActiveToRowActive = data[DIMM_MIN_ROW_ACTIVE_TO_ROW_ACTIVE]; + DB(mvOsPrintf("DRAM minRowActiveToRowActive[28] 0x%x\n", + pDimmInfo->minRowActiveToRowActive)); + pDimmInfo->minRasToCasDelay = data[DIMM_MIN_RAS_TO_CAS_DELAY]; + DB(mvOsPrintf("DRAM minRasToCasDelay[29] 0x%x\n", + pDimmInfo->minRasToCasDelay)); + pDimmInfo->minRasPulseWidth = data[DIMM_MIN_RAS_PULSE_WIDTH]; + DB(mvOsPrintf("DRAM minRasPulseWidth[30] 0x%x\n", + pDimmInfo->minRasPulseWidth)); + + /* DIMM Bank Density */ + pDimmInfo->dimmBankDensity = data[DIMM_BANK_DENSITY]; + DB(mvOsPrintf("DRAM dimmBankDensity[31] 0x%x\n", + pDimmInfo->dimmBankDensity)); + + /* Only DDR2 includes Write Recovery Time field. Other SDRAM ignore */ + pDimmInfo->minWriteRecoveryTime = data[DIMM_MIN_WRITE_RECOVERY_TIME]; + DB(mvOsPrintf("DRAM minWriteRecoveryTime[36] 0x%x\n", + pDimmInfo->minWriteRecoveryTime)); + + /* Only DDR2 includes Internal Write To Read Command Delay field. */ + pDimmInfo->minWriteToReadCmdDelay = data[DIMM_MIN_WRITE_TO_READ_CMD_DELAY]; + DB(mvOsPrintf("DRAM minWriteToReadCmdDelay[37] 0x%x\n", + pDimmInfo->minWriteToReadCmdDelay)); + + /* Only DDR2 includes Internal Read To Precharge Command Delay field. */ + pDimmInfo->minReadToPrechCmdDelay = data[DIMM_MIN_READ_TO_PRECH_CMD_DELAY]; + DB(mvOsPrintf("DRAM minReadToPrechCmdDelay[38] 0x%x\n", + pDimmInfo->minReadToPrechCmdDelay)); + + /* Only DDR2 includes Minimum Refresh to Activate/Refresh Command field */ + pDimmInfo->minRefreshToActiveCmd = data[DIMM_MIN_REFRESH_TO_ACTIVATE_CMD]; + DB(mvOsPrintf("DRAM minRefreshToActiveCmd[42] 0x%x\n", + pDimmInfo->minRefreshToActiveCmd)); + + /* calculating the sdram density. Representing device density from */ + /* bit 20 to allow representation of 4GB and above. */ + /* For example, if density is 512Mbit 0x20000000, will be represent in */ + /* deviceDensity by 0x20000000 >> 16 --> 0x00000200. Another example */ + /* is density 8GB 0x200000000 >> 16 --> 0x00002000. */ + density = (1 << ((pDimmInfo->numOfRowAddr + pDimmInfo->numOfColAddr) - 20)); + pDimmInfo->deviceDensity = density * + pDimmInfo->numOfBanksOnEachDevice * + pDimmInfo->sdramWidth; + DB(mvOsPrintf("DRAM deviceDensity %d\n",pDimmInfo->deviceDensity)); + + /* Number of devices includeing Error correction */ + pDimmInfo->numberOfDevices = (pDimmInfo->dataWidth/pDimmInfo->sdramWidth) * + pDimmInfo->numOfModuleBanks; + DB(mvOsPrintf("DRAM numberOfDevices %d\n", + pDimmInfo->numberOfDevices)); + + pDimmInfo->size = 0; + + /* Note that pDimmInfo->size is in MB units */ + if (pDimmInfo->memoryType == MEM_TYPE_SDRAM) + { + if (pDimmInfo->dimmBankDensity & BIT0) + pDimmInfo->size += 1024; /* Equal to 1GB */ + else if (pDimmInfo->dimmBankDensity & BIT1) + pDimmInfo->size += 8; /* Equal to 8MB */ + else if (pDimmInfo->dimmBankDensity & BIT2) + pDimmInfo->size += 16; /* Equal to 16MB */ + else if (pDimmInfo->dimmBankDensity & BIT3) + pDimmInfo->size += 32; /* Equal to 32MB */ + else if (pDimmInfo->dimmBankDensity & BIT4) + pDimmInfo->size += 64; /* Equal to 64MB */ + else if (pDimmInfo->dimmBankDensity & BIT5) + pDimmInfo->size += 128; /* Equal to 128MB */ + else if (pDimmInfo->dimmBankDensity & BIT6) + pDimmInfo->size += 256; /* Equal to 256MB */ + else if (pDimmInfo->dimmBankDensity & BIT7) + pDimmInfo->size += 512; /* Equal to 512MB */ + } + else if (pDimmInfo->memoryType == MEM_TYPE_DDR1) + { + if (pDimmInfo->dimmBankDensity & BIT0) + pDimmInfo->size += 1024; /* Equal to 1GB */ + else if (pDimmInfo->dimmBankDensity & BIT1) + pDimmInfo->size += 2048; /* Equal to 2GB */ + else if (pDimmInfo->dimmBankDensity & BIT2) + pDimmInfo->size += 16; /* Equal to 16MB */ + else if (pDimmInfo->dimmBankDensity & BIT3) + pDimmInfo->size += 32; /* Equal to 32MB */ + else if (pDimmInfo->dimmBankDensity & BIT4) + pDimmInfo->size += 64; /* Equal to 64MB */ + else if (pDimmInfo->dimmBankDensity & BIT5) + pDimmInfo->size += 128; /* Equal to 128MB */ + else if (pDimmInfo->dimmBankDensity & BIT6) + pDimmInfo->size += 256; /* Equal to 256MB */ + else if (pDimmInfo->dimmBankDensity & BIT7) + pDimmInfo->size += 512; /* Equal to 512MB */ + } + else /* if (dimmInfo.memoryType == MEM_TYPE_DDR2) */ + { + if (pDimmInfo->dimmBankDensity & BIT0) + pDimmInfo->size += 1024; /* Equal to 1GB */ + else if (pDimmInfo->dimmBankDensity & BIT1) + pDimmInfo->size += 2048; /* Equal to 2GB */ + else if (pDimmInfo->dimmBankDensity & BIT2) + pDimmInfo->size += 4096; /* Equal to 4GB */ + else if (pDimmInfo->dimmBankDensity & BIT3) + pDimmInfo->size += 8192; /* Equal to 8GB */ + else if (pDimmInfo->dimmBankDensity & BIT4) + pDimmInfo->size += 16384; /* Equal to 16GB */ + else if (pDimmInfo->dimmBankDensity & BIT5) + pDimmInfo->size += 128; /* Equal to 128MB */ + else if (pDimmInfo->dimmBankDensity & BIT6) + pDimmInfo->size += 256; /* Equal to 256MB */ + else if (pDimmInfo->dimmBankDensity & BIT7) + pDimmInfo->size += 512; /* Equal to 512MB */ + } + + pDimmInfo->size *= pDimmInfo->numOfModuleBanks; + + DB(mvOsPrintf("Dram: dimm size %dMB \n",pDimmInfo->size)); + + return MV_OK; +} + +/******************************************************************************* +* dimmSpdPrint - Print the SPD parameters. +* +* DESCRIPTION: +* Print the Dimm SPD parameters. +* +* INPUT: +* pDimmInfo - DIMM information structure. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +MV_VOID dimmSpdPrint(MV_U32 dimmNum) +{ + MV_DIMM_INFO dimmInfo; + MV_U32 i, temp = 0; + MV_U32 k, maskLeftOfPoint = 0, maskRightOfPoint = 0; + MV_U32 rightOfPoint = 0,leftOfPoint = 0, div, time_tmp, shift; + MV_U32 busClkPs; + MV_U8 trp_clocks=0, trcd_clocks, tras_clocks, trrd_clocks, + temp_buf[40], *spdRawData; + + busClkPs = 1000000000 / (mvBoardSysClkGet() / 100); /* in 10 ps units */ + + spdRawData = dimmInfo.spdRawData; + + if(MV_OK != dimmSpdGet(dimmNum, &dimmInfo)) + { + mvOsOutput("ERROR: Could not read SPD information!\n"); + return; + } + + /* find Manufactura of Dimm Module */ + mvOsOutput("\nManufacturer's JEDEC ID Code: "); + for(i = 0 ; i < DIMM_MODULE_MANU_SIZE ; i++) + { + mvOsOutput("%x",spdRawData[DIMM_MODULE_MANU_OFFS + i]); + } + mvOsOutput("\n"); + + /* Manufacturer's Specific Data */ + for(i = 0 ; i < DIMM_MODULE_ID_SIZE ; i++) + { + temp_buf[i] = spdRawData[DIMM_MODULE_ID_OFFS + i]; + } + mvOsOutput("Manufacturer's Specific Data: %s\n", temp_buf); + + /* Module Part Number */ + for(i = 0 ; i < DIMM_MODULE_VEN_SIZE ; i++) + { + temp_buf[i] = spdRawData[DIMM_MODULE_VEN_OFFS + i]; + } + mvOsOutput("Module Part Number: %s\n", temp_buf); + + /* Module Serial Number */ + for(i = 0; i < sizeof(MV_U32); i++) + { + temp |= spdRawData[95+i] << 8*i; + } + mvOsOutput("DIMM Serial No. %ld (%lx)\n", (long)temp, + (long)temp); + + /* find Manufac-Data of Dimm Module */ + mvOsOutput("Manufactoring Date: Year 20%d%d/ ww %d%d\n", + ((spdRawData[93] & 0xf0) >> 4), (spdRawData[93] & 0xf), + ((spdRawData[94] & 0xf0) >> 4), (spdRawData[94] & 0xf)); + /* find modul_revision of Dimm Module */ + mvOsOutput("Module Revision: %d.%d\n", + spdRawData[62]/10, spdRawData[62]%10); + + /* find manufac_place of Dimm Module */ + mvOsOutput("manufac_place: %d\n", spdRawData[72]); + + /* go over the first 35 I2C data bytes */ + for(i = 2 ; i <= 35 ; i++) + switch(i) + { + case 2: /* Memory type (DDR1/2 / SDRAM) */ + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + mvOsOutput("Dram Type is: SDRAM\n"); + else if (dimmInfo.memoryType == MEM_TYPE_DDR1) + mvOsOutput("Dram Type is: SDRAM DDR1\n"); + else if (dimmInfo.memoryType == MEM_TYPE_DDR2) + mvOsOutput("Dram Type is: SDRAM DDR2\n"); + else + mvOsOutput("Dram Type unknown\n"); + break; +/*----------------------------------------------------------------------------*/ + + case 3: /* Number Of Row Addresses */ + mvOsOutput("Module Number of row addresses: %d\n", + dimmInfo.numOfRowAddr); + break; +/*----------------------------------------------------------------------------*/ + + case 4: /* Number Of Column Addresses */ + mvOsOutput("Module Number of col addresses: %d\n", + dimmInfo.numOfColAddr); + break; +/*----------------------------------------------------------------------------*/ + + case 5: /* Number Of Module Banks */ + mvOsOutput("Number of Banks on Mod.: %d\n", + dimmInfo.numOfModuleBanks); + break; +/*----------------------------------------------------------------------------*/ + + case 6: /* Data Width */ + mvOsOutput("Module Data Width: %d bit\n", + dimmInfo.dataWidth); + break; +/*----------------------------------------------------------------------------*/ + + case 8: /* Voltage Interface */ + switch(spdRawData[i]) + { + case 0x0: + mvOsOutput("Module is TTL_5V_TOLERANT\n"); + break; + case 0x1: + mvOsOutput("Module is LVTTL\n"); + break; + case 0x2: + mvOsOutput("Module is HSTL_1_5V\n"); + break; + case 0x3: + mvOsOutput("Module is SSTL_3_3V\n"); + break; + case 0x4: + mvOsOutput("Module is SSTL_2_5V\n"); + break; + case 0x5: + if (dimmInfo.memoryType != MEM_TYPE_SDRAM) + { + mvOsOutput("Module is SSTL_1_8V\n"); + break; + } + default: + mvOsOutput("Module is VOLTAGE_UNKNOWN\n"); + break; + } + break; +/*----------------------------------------------------------------------------*/ + + case 9: /* Minimum Cycle Time At Max CasLatancy */ + leftOfPoint = (spdRawData[i] & 0xf0) >> 4; + rightOfPoint = (spdRawData[i] & 0x0f) * 10; + + /* DDR2 addition of right of point */ + if ((spdRawData[i] & 0x0f) == 0xA) + { + rightOfPoint = 25; + } + if ((spdRawData[i] & 0x0f) == 0xB) + { + rightOfPoint = 33; + } + if ((spdRawData[i] & 0x0f) == 0xC) + { + rightOfPoint = 66; + } + if ((spdRawData[i] & 0x0f) == 0xD) + { + rightOfPoint = 75; + } + mvOsOutput("Minimum Cycle Time At Max CL: %d.%d [ns]\n", + leftOfPoint, rightOfPoint); + break; +/*----------------------------------------------------------------------------*/ + + case 10: /* Clock To Data Out */ + div = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 10:100; + time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + + ((spdRawData[i] & 0x0f)); + leftOfPoint = time_tmp / div; + rightOfPoint = time_tmp % div; + mvOsOutput("Clock To Data Out: %d.%d [ns]\n", + leftOfPoint, rightOfPoint); + break; +/*----------------------------------------------------------------------------*/ + + case 11: /* Error Check Type */ + mvOsOutput("Error Check Type (0=NONE): %d\n", + dimmInfo.errorCheckType); + break; +/*----------------------------------------------------------------------------*/ + + case 12: /* Refresh Interval */ + mvOsOutput("Refresh Rate: %x\n", + dimmInfo.refreshInterval); + break; +/*----------------------------------------------------------------------------*/ + + case 13: /* Sdram Width */ + mvOsOutput("Sdram Width: %d bits\n", + dimmInfo.sdramWidth); + break; +/*----------------------------------------------------------------------------*/ + + case 14: /* Error Check Data Width */ + mvOsOutput("Error Check Data Width: %d bits\n", + dimmInfo.errorCheckDataWidth); + break; +/*----------------------------------------------------------------------------*/ + + case 15: /* Minimum Clock Delay is unsupported */ + if ((dimmInfo.memoryType == MEM_TYPE_SDRAM) || + (dimmInfo.memoryType == MEM_TYPE_DDR1)) + { + mvOsOutput("Minimum Clk Delay back to back: %d\n", + spdRawData[i]); + } + break; +/*----------------------------------------------------------------------------*/ + + case 16: /* Burst Length Supported */ + /* SDRAM/DDR1: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + burst length = * Page | TBD | TBD | TBD | 8 | 4 | 2 | 1 * + *********************************************************/ + /* DDR2: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + burst length = * Page | TBD | TBD | TBD | 8 | 4 | TBD | TBD * + *********************************************************/ + mvOsOutput("Burst Length Supported: "); + if ((dimmInfo.memoryType == MEM_TYPE_SDRAM) || + (dimmInfo.memoryType == MEM_TYPE_DDR1)) + { + if (dimmInfo.burstLengthSupported & BIT0) + mvOsOutput("1, "); + if (dimmInfo.burstLengthSupported & BIT1) + mvOsOutput("2, "); + } + if (dimmInfo.burstLengthSupported & BIT2) + mvOsOutput("4, "); + if (dimmInfo.burstLengthSupported & BIT3) + mvOsOutput("8, "); + + mvOsOutput(" Bit \n"); + break; +/*----------------------------------------------------------------------------*/ + + case 17: /* Number Of Banks On Each Device */ + mvOsOutput("Number Of Banks On Each Chip: %d\n", + dimmInfo.numOfBanksOnEachDevice); + break; +/*----------------------------------------------------------------------------*/ + + case 18: /* Suported Cas Latencies */ + + /* SDRAM: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + CAS = * TBD | 7 | 6 | 5 | 4 | 3 | 2 | 1 * + ********************************************************/ + + /* DDR 1: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + CAS = * TBD | 4 | 3.5 | 3 | 2.5 | 2 | 1.5 | 1 * + *********************************************************/ + + /* DDR 2: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + CAS = * TBD | TBD | 5 | 4 | 3 | 2 | TBD | TBD * + *********************************************************/ + + mvOsOutput("Suported Cas Latencies: (CL) "); + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + { + for (k = 0; k <=7; k++) + { + if (dimmInfo.suportedCasLatencies & (1 << k)) + mvOsOutput("%d, ", k+1); + } + } + else if (dimmInfo.memoryType == MEM_TYPE_DDR1) + { + if (dimmInfo.suportedCasLatencies & BIT0) + mvOsOutput("1, "); + if (dimmInfo.suportedCasLatencies & BIT1) + mvOsOutput("1.5, "); + if (dimmInfo.suportedCasLatencies & BIT2) + mvOsOutput("2, "); + if (dimmInfo.suportedCasLatencies & BIT3) + mvOsOutput("2.5, "); + if (dimmInfo.suportedCasLatencies & BIT4) + mvOsOutput("3, "); + if (dimmInfo.suportedCasLatencies & BIT5) + mvOsOutput("3.5, "); + } + else if (dimmInfo.memoryType == MEM_TYPE_DDR2) + { + if (dimmInfo.suportedCasLatencies & BIT2) + mvOsOutput("2, "); + if (dimmInfo.suportedCasLatencies & BIT3) + mvOsOutput("3, "); + if (dimmInfo.suportedCasLatencies & BIT4) + mvOsOutput("4, "); + if (dimmInfo.suportedCasLatencies & BIT5) + mvOsOutput("5, "); + } + else + mvOsOutput("?.?, "); + mvOsOutput("\n"); + break; +/*----------------------------------------------------------------------------*/ + + case 20: /* DDR2 DIMM type info */ + if (dimmInfo.memoryType == MEM_TYPE_DDR2) + { + if (dimmInfo.dimmTypeInfo & (BIT0 | BIT4)) + mvOsOutput("Registered DIMM (RDIMM)\n"); + else if (dimmInfo.dimmTypeInfo & (BIT1 | BIT5)) + mvOsOutput("Unbuffered DIMM (UDIMM)\n"); + else + mvOsOutput("Unknown DIMM type.\n"); + } + + break; +/*----------------------------------------------------------------------------*/ + + case 21: /* SDRAM Modules Attributes */ + mvOsOutput("\nModule Attributes (SPD Byte 21): \n"); + + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + { + if (dimmInfo.dimmAttributes & BIT0) + mvOsOutput(" Buffered Addr/Control Input: Yes\n"); + else + mvOsOutput(" Buffered Addr/Control Input: No\n"); + + if (dimmInfo.dimmAttributes & BIT1) + mvOsOutput(" Registered Addr/Control Input: Yes\n"); + else + mvOsOutput(" Registered Addr/Control Input: No\n"); + + if (dimmInfo.dimmAttributes & BIT2) + mvOsOutput(" On-Card PLL (clock): Yes \n"); + else + mvOsOutput(" On-Card PLL (clock): No \n"); + + if (dimmInfo.dimmAttributes & BIT3) + mvOsOutput(" Bufferd DQMB Input: Yes \n"); + else + mvOsOutput(" Bufferd DQMB Inputs: No \n"); + + if (dimmInfo.dimmAttributes & BIT4) + mvOsOutput(" Registered DQMB Inputs: Yes \n"); + else + mvOsOutput(" Registered DQMB Inputs: No \n"); + + if (dimmInfo.dimmAttributes & BIT5) + mvOsOutput(" Differential Clock Input: Yes \n"); + else + mvOsOutput(" Differential Clock Input: No \n"); + + if (dimmInfo.dimmAttributes & BIT6) + mvOsOutput(" redundant Row Addressing: Yes \n"); + else + mvOsOutput(" redundant Row Addressing: No \n"); + } + else if (dimmInfo.memoryType == MEM_TYPE_DDR1) + { + if (dimmInfo.dimmAttributes & BIT0) + mvOsOutput(" Buffered Addr/Control Input: Yes\n"); + else + mvOsOutput(" Buffered Addr/Control Input: No\n"); + + if (dimmInfo.dimmAttributes & BIT1) + mvOsOutput(" Registered Addr/Control Input: Yes\n"); + else + mvOsOutput(" Registered Addr/Control Input: No\n"); + + if (dimmInfo.dimmAttributes & BIT2) + mvOsOutput(" On-Card PLL (clock): Yes \n"); + else + mvOsOutput(" On-Card PLL (clock): No \n"); + + if (dimmInfo.dimmAttributes & BIT3) + mvOsOutput(" FET Switch On-Card Enabled: Yes \n"); + else + mvOsOutput(" FET Switch On-Card Enabled: No \n"); + + if (dimmInfo.dimmAttributes & BIT4) + mvOsOutput(" FET Switch External Enabled: Yes \n"); + else + mvOsOutput(" FET Switch External Enabled: No \n"); + + if (dimmInfo.dimmAttributes & BIT5) + mvOsOutput(" Differential Clock Input: Yes \n"); + else + mvOsOutput(" Differential Clock Input: No \n"); + } + else /* if (dimmInfo.memoryType == MEM_TYPE_DDR2) */ + { + mvOsOutput(" Number of Active Registers on the DIMM: %d\n", + (dimmInfo.dimmAttributes & 0x3) + 1); + + mvOsOutput(" Number of PLLs on the DIMM: %d\n", + ((dimmInfo.dimmAttributes) >> 2) & 0x3); + + if (dimmInfo.dimmAttributes & BIT4) + mvOsOutput(" FET Switch External Enabled: Yes \n"); + else + mvOsOutput(" FET Switch External Enabled: No \n"); + + if (dimmInfo.dimmAttributes & BIT6) + mvOsOutput(" Analysis probe installed: Yes \n"); + else + mvOsOutput(" Analysis probe installed: No \n"); + } + + break; +/*----------------------------------------------------------------------------*/ + + case 22: /* Suported AutoPreCharge */ + mvOsOutput("\nModul Attributes (SPD Byte 22): \n"); + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + { + if ( spdRawData[i] & BIT0 ) + mvOsOutput(" Early Ras Precharge: Yes \n"); + else + mvOsOutput(" Early Ras Precharge: No \n"); + + if ( spdRawData[i] & BIT1 ) + mvOsOutput(" AutoPreCharge: Yes \n"); + else + mvOsOutput(" AutoPreCharge: No \n"); + + if ( spdRawData[i] & BIT2 ) + mvOsOutput(" Precharge All: Yes \n"); + else + mvOsOutput(" Precharge All: No \n"); + + if ( spdRawData[i] & BIT3 ) + mvOsOutput(" Write 1/ReadBurst: Yes \n"); + else + mvOsOutput(" Write 1/ReadBurst: No \n"); + + if ( spdRawData[i] & BIT4 ) + mvOsOutput(" lower VCC tolerance: 5%%\n"); + else + mvOsOutput(" lower VCC tolerance: 10%%\n"); + + if ( spdRawData[i] & BIT5 ) + mvOsOutput(" upper VCC tolerance: 5%%\n"); + else + mvOsOutput(" upper VCC tolerance: 10%%\n"); + } + else if (dimmInfo.memoryType == MEM_TYPE_DDR1) + { + if ( spdRawData[i] & BIT0 ) + mvOsOutput(" Supports Weak Driver: Yes \n"); + else + mvOsOutput(" Supports Weak Driver: No \n"); + + if ( !(spdRawData[i] & BIT4) ) + mvOsOutput(" lower VCC tolerance: 0.2V\n"); + + if ( !(spdRawData[i] & BIT5) ) + mvOsOutput(" upper VCC tolerance: 0.2V\n"); + + if ( spdRawData[i] & BIT6 ) + mvOsOutput(" Concurrent Auto Preharge: Yes \n"); + else + mvOsOutput(" Concurrent Auto Preharge: No \n"); + + if ( spdRawData[i] & BIT7 ) + mvOsOutput(" Supports Fast AP: Yes \n"); + else + mvOsOutput(" Supports Fast AP: No \n"); + } + else if (dimmInfo.memoryType == MEM_TYPE_DDR2) + { + if ( spdRawData[i] & BIT0 ) + mvOsOutput(" Supports Weak Driver: Yes \n"); + else + mvOsOutput(" Supports Weak Driver: No \n"); + } + break; +/*----------------------------------------------------------------------------*/ + + case 23: + /* Minimum Cycle Time At Maximum Cas Latancy Minus 1 (2nd highest CL) */ + leftOfPoint = (spdRawData[i] & 0xf0) >> 4; + rightOfPoint = (spdRawData[i] & 0x0f) * 10; + + /* DDR2 addition of right of point */ + if ((spdRawData[i] & 0x0f) == 0xA) + { + rightOfPoint = 25; + } + if ((spdRawData[i] & 0x0f) == 0xB) + { + rightOfPoint = 33; + } + if ((spdRawData[i] & 0x0f) == 0xC) + { + rightOfPoint = 66; + } + if ((spdRawData[i] & 0x0f) == 0xD) + { + rightOfPoint = 75; + } + + mvOsOutput("Minimum Cycle Time At 2nd highest CasLatancy" + "(0 = Not supported): %d.%d [ns]\n", + leftOfPoint, rightOfPoint ); + break; +/*----------------------------------------------------------------------------*/ + + case 24: /* Clock To Data Out 2nd highest Cas Latency Value*/ + div = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? 10:100; + time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + + ((spdRawData[i] & 0x0f)); + leftOfPoint = time_tmp / div; + rightOfPoint = time_tmp % div; + mvOsOutput("Clock To Data Out (2nd CL value): %d.%d [ns]\n", + leftOfPoint, rightOfPoint); + break; +/*----------------------------------------------------------------------------*/ + + case 25: + /* Minimum Cycle Time At Maximum Cas Latancy Minus 2 (3rd highest CL) */ + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + { + leftOfPoint = (spdRawData[i] & 0xfc) >> 2; + rightOfPoint = (spdRawData[i] & 0x3) * 25; + } + else /* DDR1 or DDR2 */ + { + leftOfPoint = (spdRawData[i] & 0xf0) >> 4; + rightOfPoint = (spdRawData[i] & 0x0f) * 10; + + /* DDR2 addition of right of point */ + if ((spdRawData[i] & 0x0f) == 0xA) + { + rightOfPoint = 25; + } + if ((spdRawData[i] & 0x0f) == 0xB) + { + rightOfPoint = 33; + } + if ((spdRawData[i] & 0x0f) == 0xC) + { + rightOfPoint = 66; + } + if ((spdRawData[i] & 0x0f) == 0xD) + { + rightOfPoint = 75; + } + } + mvOsOutput("Minimum Cycle Time At 3rd highest CasLatancy" + "(0 = Not supported): %d.%d [ns]\n", + leftOfPoint, rightOfPoint ); + break; +/*----------------------------------------------------------------------------*/ + + case 26: /* Clock To Data Out 3rd highest Cas Latency Value*/ + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + { + leftOfPoint = (spdRawData[i] & 0xfc) >> 2; + rightOfPoint = (spdRawData[i] & 0x3) * 25; + } + else /* DDR1 or DDR2 */ + { + time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + + ((spdRawData[i] & 0x0f)); + leftOfPoint = 0; + rightOfPoint = time_tmp; + } + mvOsOutput("Clock To Data Out (3rd CL value): %d.%2d[ns]\n", + leftOfPoint, rightOfPoint ); + break; +/*----------------------------------------------------------------------------*/ + + case 27: /* Minimum Row Precharge Time */ + shift = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 0:2; + maskLeftOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? + 0xff : 0xfc; + maskRightOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? + 0x00 : 0x03; + leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> shift); + rightOfPoint = (spdRawData[i] & maskRightOfPoint)*25; + temp = ((leftOfPoint*100) + rightOfPoint);/* in 10ps Intervals*/ + trp_clocks = (temp + (busClkPs-1)) / busClkPs; + mvOsOutput("Minimum Row Precharge Time [ns]: %d.%d = " + "in Clk cycles %d\n", + leftOfPoint, rightOfPoint, trp_clocks); + break; +/*----------------------------------------------------------------------------*/ + + case 28: /* Minimum Row Active to Row Active Time */ + shift = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 0:2; + maskLeftOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? + 0xff : 0xfc; + maskRightOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? + 0x00 : 0x03; + leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> shift); + rightOfPoint = (spdRawData[i] & maskRightOfPoint)*25; + temp = ((leftOfPoint*100) + rightOfPoint);/* in 100ns Interval*/ + trrd_clocks = (temp + (busClkPs-1)) / busClkPs; + mvOsOutput("Minimum Row Active -To- Row Active Delay [ns]: " + "%d.%d = in Clk cycles %d\n", + leftOfPoint, rightOfPoint, trp_clocks); + break; +/*----------------------------------------------------------------------------*/ + + case 29: /* Minimum Ras-To-Cas Delay */ + shift = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 0:2; + maskLeftOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? + 0xff : 0xfc; + maskRightOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? + 0x00 : 0x03; + leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> shift); + rightOfPoint = (spdRawData[i] & maskRightOfPoint)*25; + temp = ((leftOfPoint*100) + rightOfPoint);/* in 100ns Interval*/ + trcd_clocks = (temp + (busClkPs-1) )/ busClkPs; + mvOsOutput("Minimum Ras-To-Cas Delay [ns]: %d.%d = " + "in Clk cycles %d\n", + leftOfPoint, rightOfPoint, trp_clocks); + break; +/*----------------------------------------------------------------------------*/ + + case 30: /* Minimum Ras Pulse Width */ + tras_clocks = (cas2ps(spdRawData[i])+(busClkPs-1)) / busClkPs; + mvOsOutput("Minimum Ras Pulse Width [ns]: %d = " + "in Clk cycles %d\n", spdRawData[i], tras_clocks); + break; +/*----------------------------------------------------------------------------*/ + + case 31: /* Module Bank Density */ + mvOsOutput("Module Bank Density (more than 1= Multisize-Module):"); + + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + { + if (dimmInfo.dimmBankDensity & BIT0) + mvOsOutput("1GB, "); + if (dimmInfo.dimmBankDensity & BIT1) + mvOsOutput("8MB, "); + if (dimmInfo.dimmBankDensity & BIT2) + mvOsOutput("16MB, "); + if (dimmInfo.dimmBankDensity & BIT3) + mvOsOutput("32MB, "); + if (dimmInfo.dimmBankDensity & BIT4) + mvOsOutput("64MB, "); + if (dimmInfo.dimmBankDensity & BIT5) + mvOsOutput("128MB, "); + if (dimmInfo.dimmBankDensity & BIT6) + mvOsOutput("256MB, "); + if (dimmInfo.dimmBankDensity & BIT7) + mvOsOutput("512MB, "); + } + else if (dimmInfo.memoryType == MEM_TYPE_DDR1) + { + if (dimmInfo.dimmBankDensity & BIT0) + mvOsOutput("1GB, "); + if (dimmInfo.dimmBankDensity & BIT1) + mvOsOutput("2GB, "); + if (dimmInfo.dimmBankDensity & BIT2) + mvOsOutput("16MB, "); + if (dimmInfo.dimmBankDensity & BIT3) + mvOsOutput("32MB, "); + if (dimmInfo.dimmBankDensity & BIT4) + mvOsOutput("64MB, "); + if (dimmInfo.dimmBankDensity & BIT5) + mvOsOutput("128MB, "); + if (dimmInfo.dimmBankDensity & BIT6) + mvOsOutput("256MB, "); + if (dimmInfo.dimmBankDensity & BIT7) + mvOsOutput("512MB, "); + } + else /* if (dimmInfo.memoryType == MEM_TYPE_DDR2) */ + { + if (dimmInfo.dimmBankDensity & BIT0) + mvOsOutput("1GB, "); + if (dimmInfo.dimmBankDensity & BIT1) + mvOsOutput("2GB, "); + if (dimmInfo.dimmBankDensity & BIT2) + mvOsOutput("4GB, "); + if (dimmInfo.dimmBankDensity & BIT3) + mvOsOutput("8GB, "); + if (dimmInfo.dimmBankDensity & BIT4) + mvOsOutput("16GB, "); + if (dimmInfo.dimmBankDensity & BIT5) + mvOsOutput("128MB, "); + if (dimmInfo.dimmBankDensity & BIT6) + mvOsOutput("256MB, "); + if (dimmInfo.dimmBankDensity & BIT7) + mvOsOutput("512MB, "); + } + mvOsOutput("\n"); + break; +/*----------------------------------------------------------------------------*/ + + case 32: /* Address And Command Setup Time (measured in ns/1000) */ + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + { + rightOfPoint = (spdRawData[i] & 0x0f); + leftOfPoint = (spdRawData[i] & 0xf0) >> 4; + if(leftOfPoint > 7) + { + leftOfPoint *= -1; + } + } + else /* DDR1 or DDR2 */ + { + time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + + ((spdRawData[i] & 0x0f)); + leftOfPoint = time_tmp / 100; + rightOfPoint = time_tmp % 100; + } + mvOsOutput("Address And Command Setup Time [ns]: %d.%d\n", + leftOfPoint, rightOfPoint); + break; +/*----------------------------------------------------------------------------*/ + + case 33: /* Address And Command Hold Time */ + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + { + rightOfPoint = (spdRawData[i] & 0x0f); + leftOfPoint = (spdRawData[i] & 0xf0) >> 4; + if(leftOfPoint > 7) + { + leftOfPoint *= -1; + } + } + else /* DDR1 or DDR2 */ + { + time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + + ((spdRawData[i] & 0x0f)); + leftOfPoint = time_tmp / 100; + rightOfPoint = time_tmp % 100; + } + mvOsOutput("Address And Command Hold Time [ns]: %d.%d\n", + leftOfPoint, rightOfPoint); + break; +/*----------------------------------------------------------------------------*/ + + case 34: /* Data Input Setup Time */ + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + { + rightOfPoint = (spdRawData[i] & 0x0f); + leftOfPoint = (spdRawData[i] & 0xf0) >> 4; + if(leftOfPoint > 7) + { + leftOfPoint *= -1; + } + } + else /* DDR1 or DDR2 */ + { + time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + + ((spdRawData[i] & 0x0f)); + leftOfPoint = time_tmp / 100; + rightOfPoint = time_tmp % 100; + } + mvOsOutput("Data Input Setup Time [ns]: %d.%d\n", + leftOfPoint, rightOfPoint); + break; +/*----------------------------------------------------------------------------*/ + + case 35: /* Data Input Hold Time */ + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + { + rightOfPoint = (spdRawData[i] & 0x0f); + leftOfPoint = (spdRawData[i] & 0xf0) >> 4; + if(leftOfPoint > 7) + { + leftOfPoint *= -1; + } + } + else /* DDR1 or DDR2 */ + { + time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + + ((spdRawData[i] & 0x0f)); + leftOfPoint = time_tmp / 100; + rightOfPoint = time_tmp % 100; + } + mvOsOutput("Data Input Hold Time [ns]: %d.%d\n\n", + leftOfPoint, rightOfPoint); + break; +/*----------------------------------------------------------------------------*/ + + case 36: /* Relevant for DDR2 only: Write Recovery Time */ + leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> 2); + rightOfPoint = (spdRawData[i] & maskRightOfPoint) * 25; + mvOsOutput("Write Recovery Time [ns]: %d.%d\n", + leftOfPoint, rightOfPoint); + break; +/*----------------------------------------------------------------------------*/ + } + +} + + +/* + * translate ns.ns/10 coding of SPD timing values + * into ps unit values + */ +/******************************************************************************* +* cas2ps - Translate x.y ns parameter to pico-seconds values +* +* DESCRIPTION: +* This function translates x.y nano seconds to its value in pico seconds. +* For example 3.75ns will return 3750. +* +* INPUT: +* spd_byte - DIMM SPD byte. +* +* OUTPUT: +* None. +* +* RETURN: +* value in pico seconds. +* +*******************************************************************************/ +static MV_U32 cas2ps(MV_U8 spd_byte) +{ + MV_U32 ns, ns10; + + /* isolate upper nibble */ + ns = (spd_byte >> 4) & 0x0F; + /* isolate lower nibble */ + ns10 = (spd_byte & 0x0F); + + if( ns10 < 10 ) { + ns10 *= 10; + } + else if( ns10 == 10 ) + ns10 = 25; + else if( ns10 == 11 ) + ns10 = 33; + else if( ns10 == 12 ) + ns10 = 66; + else if( ns10 == 13 ) + ns10 = 75; + else + { + mvOsOutput("cas2ps Err. unsupported cycle time.\n"); + } + + return (ns*1000 + ns10*10); +} + diff --git a/target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/spd/mvSpd.h b/target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/spd/mvSpd.h new file mode 100644 index 000000000..f95546624 --- /dev/null +++ b/target/linux/generic-2.6/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/spd/mvSpd.h @@ -0,0 +1,192 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCmvDram +#define __INCmvDram + +#include "ddr2/mvDramIf.h" +#include "twsi/mvTwsi.h" + +#define MAX_DIMM_NUM 2 +#define SPD_SIZE 128 + +/* Dimm spd offsets */ +#define DIMM_MEM_TYPE 2 +#define DIMM_ROW_NUM 3 +#define DIMM_COL_NUM 4 +#define DIMM_MODULE_BANK_NUM 5 +#define DIMM_DATA_WIDTH 6 +#define DIMM_VOLT_IF 8 +#define DIMM_MIN_CC_AT_MAX_CAS 9 +#define DIMM_ERR_CHECK_TYPE 11 +#define DIMM_REFRESH_INTERVAL 12 +#define DIMM_SDRAM_WIDTH 13 +#define DIMM_ERR_CHECK_DATA_WIDTH 14 +#define DIMM_MIN_CLK_DEL 15 +#define DIMM_BURST_LEN_SUP 16 +#define DIMM_DEV_BANK_NUM 17 +#define DIMM_SUP_CAL 18 +#define DIMM_DDR2_TYPE_INFORMATION 20 /* DDR2 only */ +#define DIMM_BUF_ADDR_CONT_IN 21 +#define DIMM_MIN_CC_AT_MAX_CAS_MINUS1 23 +#define DIMM_MIN_CC_AT_MAX_CAS_MINUS2 25 +#define DIMM_MIN_ROW_PRECHARGE_TIME 27 +#define DIMM_MIN_ROW_ACTIVE_TO_ROW_ACTIVE 28 +#define DIMM_MIN_RAS_TO_CAS_DELAY 29 +#define DIMM_MIN_RAS_PULSE_WIDTH 30 +#define DIMM_BANK_DENSITY 31 +#define DIMM_MIN_WRITE_RECOVERY_TIME 36 +#define DIMM_MIN_WRITE_TO_READ_CMD_DELAY 37 +#define DIMM_MIN_READ_TO_PRECH_CMD_DELAY 38 +#define DIMM_MIN_REFRESH_TO_ACTIVATE_CMD 42 +#define DIMM_SPD_VERSION 62 + +/* Dimm Memory Type values */ +#define DIMM_MEM_TYPE_SDRAM 0x4 +#define DIMM_MEM_TYPE_DDR1 0x7 +#define DIMM_MEM_TYPE_DDR2 0x8 + +#define DIMM_MODULE_MANU_OFFS 64 +#define DIMM_MODULE_MANU_SIZE 8 +#define DIMM_MODULE_VEN_OFFS 73 +#define DIMM_MODULE_VEN_SIZE 25 +#define DIMM_MODULE_ID_OFFS 99 +#define DIMM_MODULE_ID_SIZE 18 + +/* enumeration for voltage levels. */ +typedef enum _mvDimmVoltageIf +{ + TTL_5V_TOLERANT, + LVTTL, + HSTL_1_5V, + SSTL_3_3V, + SSTL_2_5V, + VOLTAGE_UNKNOWN, +} MV_DIMM_VOLTAGE_IF; + + +/* enumaration for SDRAM CAS Latencies. */ +typedef enum _mvDimmSdramCas +{ + SD_CL_1 =1, + SD_CL_2, + SD_CL_3, + SD_CL_4, + SD_CL_5, + SD_CL_6, + SD_CL_7, + SD_FAULT +}MV_DIMM_SDRAM_CAS; + + +/* DIMM information structure */ +typedef struct _mvDimmInfo +{ + MV_MEMORY_TYPE memoryType; /* DDR or SDRAM */ + + MV_U8 spdRawData[SPD_SIZE]; /* Content of SPD-EEPROM copied 1:1 */ + + /* DIMM dimensions */ + MV_U32 numOfRowAddr; + MV_U32 numOfColAddr; + MV_U32 numOfModuleBanks; + MV_U32 dataWidth; + MV_U32 errorCheckType; /* ECC , PARITY..*/ + MV_U32 sdramWidth; /* 4,8,16 or 32 */ + MV_U32 errorCheckDataWidth; /* 0 - no, 1 - Yes */ + MV_U32 burstLengthSupported; + MV_U32 numOfBanksOnEachDevice; + MV_U32 suportedCasLatencies; + MV_U32 refreshInterval; + MV_U32 dimmBankDensity; + MV_U32 dimmTypeInfo; /* DDR2 only */ + MV_U32 dimmAttributes; + + /* DIMM timing parameters */ + MV_U32 minCycleTimeAtMaxCasLatPs; + MV_U32 minCycleTimeAtMaxCasLatMinus1Ps; + MV_U32 minCycleTimeAtMaxCasLatMinus2Ps; + MV_U32 minRowPrechargeTime; + MV_U32 minRowActiveToRowActive; + MV_U32 minRasToCasDelay; + MV_U32 minRasPulseWidth; + MV_U32 minWriteRecoveryTime; /* DDR2 only */ + MV_U32 minWriteToReadCmdDelay; /* DDR2 only */ + MV_U32 minReadToPrechCmdDelay; /* DDR2 only */ + MV_U32 minRefreshToActiveCmd; /* DDR2 only */ + + /* Parameters calculated from the extracted DIMM information */ + MV_U32 size; /* 16,64,128,256 or 512 MByte in MB units */ + MV_U32 deviceDensity; /* 16,64,128,256 or 512 Mbit in MB units */ + MV_U32 numberOfDevices; + +} MV_DIMM_INFO; + + +MV_STATUS mvDramBankInfoGet(MV_U32 bankNum, MV_DRAM_BANK_INFO *pBankInfo); +MV_STATUS dimmSpdGet(MV_U32 dimmNum, MV_DIMM_INFO *pDimmInfo); +MV_VOID dimmSpdPrint(MV_U32 dimmNum); +MV_STATUS dimmSpdCpy(MV_VOID); + +#endif /* __INCmvDram */ |