diff options
Diffstat (limited to 'target/linux/generic-2.6/files-2.6.27/drivers')
9 files changed, 2292 insertions, 0 deletions
diff --git a/target/linux/generic-2.6/files-2.6.27/drivers/char/gpio_dev.c b/target/linux/generic-2.6/files-2.6.27/drivers/char/gpio_dev.c new file mode 100644 index 000000000..3fbf3a58c --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.27/drivers/char/gpio_dev.c @@ -0,0 +1,201 @@ +/* + * character device wrapper for generic gpio layer + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA02111-1307USA + * + * Feedback, Bugs... blogic@openwrt.org + * + */ + +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <asm/uaccess.h> +#include <asm/io.h> +#include <asm/gpio.h> +#include <asm/atomic.h> +#include <linux/init.h> +#include <linux/genhd.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/gpio_dev.h> + +#define DRVNAME "gpiodev" +#define DEVNAME "gpio" + +static int dev_major; +static unsigned int gpio_access_mask; +static struct class *gpio_class; + +/* Counter is 1, if the device is not opened and zero (or less) if opened. */ +static atomic_t gpio_open_cnt = ATOMIC_INIT(1); + +static int +gpio_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg) +{ + int retval = 0; + + if (((1 << arg) & gpio_access_mask) != (1 << arg)) + { + retval = -EINVAL; + goto out; + } + + switch (cmd) + { + case GPIO_GET: + retval = gpio_get_value(arg); + break; + + case GPIO_SET: + gpio_set_value(arg, 1); + break; + + case GPIO_CLEAR: + gpio_set_value(arg, 0); + break; + + case GPIO_DIR_IN: + gpio_direction_input(arg); + break; + + case GPIO_DIR_OUT: + gpio_direction_output(arg, 0); + break; + + default: + retval = -EINVAL; + break; + } + +out: + return retval; +} + +static int +gpio_open(struct inode *inode, struct file *file) +{ + int result = 0; + unsigned int dev_minor = MINOR(inode->i_rdev); + + if (dev_minor != 0) + { + printk(KERN_ERR DRVNAME ": trying to access unknown minor device -> %d\n", dev_minor); + result = -ENODEV; + goto out; + } + + /* FIXME: We should really allow multiple applications to open the device + * at the same time, as long as the apps access different IO pins. + * The generic gpio-registration functions can be used for that. + * Two new IOCTLs have to be introduced for that. Need to check userspace + * compatibility first. --mb */ + if (!atomic_dec_and_test(&gpio_open_cnt)) { + atomic_inc(&gpio_open_cnt); + printk(KERN_ERR DRVNAME ": Device with minor ID %d already in use\n", dev_minor); + result = -EBUSY; + goto out; + } + +out: + return result; +} + +static int +gpio_close(struct inode * inode, struct file * file) +{ + smp_mb__before_atomic_inc(); + atomic_inc(&gpio_open_cnt); + + return 0; +} + +struct file_operations gpio_fops = { + ioctl: gpio_ioctl, + open: gpio_open, + release: gpio_close +}; + +static int +gpio_probe(struct platform_device *dev) +{ + int result = 0; + + dev_major = register_chrdev(0, DEVNAME, &gpio_fops); + if (!dev_major) + { + printk(KERN_ERR DRVNAME ": Error whilst opening %s \n", DEVNAME); + result = -ENODEV; + goto out; + } + + gpio_class = class_create(THIS_MODULE, DEVNAME); + device_create(gpio_class, NULL, MKDEV(dev_major, 0), dev, DEVNAME); + + printk(KERN_INFO DRVNAME ": gpio device registered with major %d\n", dev_major); + + if (dev->num_resources != 1) + { + printk(KERN_ERR DRVNAME ": device may only have 1 resource\n"); + result = -ENODEV; + goto out; + } + + gpio_access_mask = dev->resource[0].start; + + printk(KERN_INFO DRVNAME ": gpio platform device registered with access mask %08X\n", gpio_access_mask); +out: + return result; +} + +static int +gpio_remove(struct platform_device *dev) +{ + unregister_chrdev(dev_major, DEVNAME); + return 0; +} + +static struct +platform_driver gpio_driver = { + .probe = gpio_probe, + .remove = gpio_remove, + .driver = { + .name = "GPIODEV", + .owner = THIS_MODULE, + }, +}; + +static int __init +gpio_mod_init(void) +{ + int ret = platform_driver_register(&gpio_driver); + if (ret) + printk(KERN_INFO DRVNAME ": Error registering platfom driver!"); + + return ret; +} + +static void __exit +gpio_mod_exit(void) +{ + platform_driver_unregister(&gpio_driver); +} + +module_init (gpio_mod_init); +module_exit (gpio_mod_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("John Crispin / OpenWrt"); +MODULE_DESCRIPTION("Character device for for generic gpio api"); diff --git a/target/linux/generic-2.6/files-2.6.27/drivers/input/misc/gpio_buttons.c b/target/linux/generic-2.6/files-2.6.27/drivers/input/misc/gpio_buttons.c new file mode 100644 index 000000000..83a817834 --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.27/drivers/input/misc/gpio_buttons.c @@ -0,0 +1,209 @@ +/* + * Driver for buttons on GPIO lines not capable of generating interrupts + * + * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org> + * + * This file was based on: /drivers/input/misc/cobalt_btns.c + * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * + * also was based on: /drivers/input/keyboard/gpio_keys.c + * Copyright 2005 Phil Blundell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> + +#include <linux/input.h> +#include <linux/input-polldev.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> + +#include <linux/gpio_buttons.h> + +#include <asm/gpio.h> + +#define DRV_NAME "gpio-buttons" +#define DRV_VERSION "0.1.1" +#define PFX DRV_NAME ": " + +struct gpio_buttons_dev { + struct input_polled_dev *poll_dev; + struct gpio_buttons_platform_data *pdata; +}; + +static void gpio_buttons_poll(struct input_polled_dev *dev) +{ + struct gpio_buttons_dev *bdev = dev->private; + struct gpio_buttons_platform_data *pdata = bdev->pdata; + struct input_dev *input = dev->input; + int i; + + for (i = 0; i < bdev->pdata->nbuttons; i++) { + struct gpio_button *button = &pdata->buttons[i]; + unsigned int type = button->type ?: EV_KEY; + int state; + + state = gpio_get_value(button->gpio) ? 1 : 0; + state ^= button->active_low; + + if (state) { + button->count++; + } else { + if (button->count >= button->threshold) { + input_event(input, type, button->code, 1); + input_sync(input); + } + button->count = 0; + } + + if (button->count == button->threshold) { + input_event(input, type, button->code, 0); + input_sync(input); + } + } +} + +static int __devinit gpio_buttons_probe(struct platform_device *pdev) +{ + struct gpio_buttons_platform_data *pdata = pdev->dev.platform_data; + struct gpio_buttons_dev *bdev; + struct input_polled_dev *poll_dev; + struct input_dev *input; + int error, i; + + + if (!pdata) + return -ENXIO; + + bdev = kzalloc(sizeof(*bdev), GFP_KERNEL); + if (!bdev) { + printk(KERN_ERR DRV_NAME "no memory for device\n"); + return -ENOMEM; + } + + poll_dev = input_allocate_polled_device(); + if (!poll_dev) { + printk(KERN_ERR DRV_NAME "no memory for polled device\n"); + error = -ENOMEM; + goto err_free_bdev; + } + + poll_dev->private = bdev; + poll_dev->poll = gpio_buttons_poll; + poll_dev->poll_interval = pdata->poll_interval; + + input = poll_dev->input; + + input->evbit[0] = BIT(EV_KEY); + input->name = pdev->name; + input->phys = "gpio-buttons/input0"; + input->dev.parent = &pdev->dev; + + input->id.bustype = BUS_HOST; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = 0x0100; + + for (i = 0; i < pdata->nbuttons; i++) { + struct gpio_button *button = &pdata->buttons[i]; + unsigned int gpio = button->gpio; + unsigned int type = button->type ?: EV_KEY; + + error = gpio_request(gpio, button->desc ? + button->desc : DRV_NAME); + if (error) { + printk(KERN_ERR PFX "unable to claim gpio %u, " + "error %d\n", gpio, error); + goto err_free_gpio; + } + + error = gpio_direction_input(gpio); + if (error) { + printk(KERN_ERR PFX "unable to set direction on " + "gpio %u, error %d\n", gpio, error); + goto err_free_gpio; + } + + input_set_capability(input, type, button->code); + button->count = 0; + } + + bdev->poll_dev = poll_dev; + bdev->pdata = pdata; + platform_set_drvdata(pdev, bdev); + + error = input_register_polled_device(poll_dev); + if (error) { + printk(KERN_ERR PFX "unable to register polled device, " + "error %d\n", error); + goto err_free_gpio; + } + + return 0; + +err_free_gpio: + for (i = i - 1; i >= 0; i--) + gpio_free(pdata->buttons[i].gpio); + + input_free_polled_device(poll_dev); + +err_free_bdev: + kfree(bdev); + + platform_set_drvdata(pdev, NULL); + return error; +} + +static int __devexit gpio_buttons_remove(struct platform_device *pdev) +{ + struct gpio_buttons_dev *bdev = platform_get_drvdata(pdev); + struct gpio_buttons_platform_data *pdata = bdev->pdata; + int i; + + input_unregister_polled_device(bdev->poll_dev); + + for (i = 0; i < pdata->nbuttons; i++) + gpio_free(pdata->buttons[i].gpio); + + input_free_polled_device(bdev->poll_dev); + + kfree(bdev); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver gpio_buttons_driver = { + .probe = gpio_buttons_probe, + .remove = __devexit_p(gpio_buttons_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init gpio_buttons_init(void) +{ + printk(KERN_INFO DRV_NAME " driver version " DRV_VERSION "\n"); + return platform_driver_register(&gpio_buttons_driver); +} + +static void __exit gpio_buttons_exit(void) +{ + platform_driver_unregister(&gpio_buttons_driver); +} + +module_init(gpio_buttons_init); +module_exit(gpio_buttons_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>"); +MODULE_VERSION(DRV_VERSION); +MODULE_DESCRIPTION("Polled buttons driver for CPU GPIOs"); + diff --git a/target/linux/generic-2.6/files-2.6.27/drivers/leds/leds-alix.c b/target/linux/generic-2.6/files-2.6.27/drivers/leds/leds-alix.c new file mode 100644 index 000000000..103ca7dfa --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.27/drivers/leds/leds-alix.c @@ -0,0 +1,172 @@ +/* + * LEDs driver for PCEngines ALIX 2/3 series + * + * Copyright (C) 2007 Petr Liebman + * + * Based on leds-wrap.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/err.h> +#include <asm/io.h> + +#define DRVNAME "alix-led" + +#define ALIX_LED1_PORT (0x6100) +#define ALIX_LED1_ON (1<<22) +#define ALIX_LED1_OFF (1<<6) + +#define ALIX_LED2_PORT (0x6180) +#define ALIX_LED2_ON (1<<25) +#define ALIX_LED2_OFF (1<<9) + +#define ALIX_LED3_PORT (0x6180) +#define ALIX_LED3_ON (1<<27) +#define ALIX_LED3_OFF (1<<11) + + +static struct platform_device *pdev; + +static void alix_led_set_1(struct led_classdev *led_cdev, + enum led_brightness value) +{ + if (value) + outl(ALIX_LED1_ON, ALIX_LED1_PORT); + else + outl(ALIX_LED1_OFF, ALIX_LED1_PORT); +} + +static void alix_led_set_2(struct led_classdev *led_cdev, + enum led_brightness value) +{ + if (value) + outl(ALIX_LED2_ON, ALIX_LED2_PORT); + else + outl(ALIX_LED2_OFF, ALIX_LED2_PORT); +} + +static void alix_led_set_3(struct led_classdev *led_cdev, + enum led_brightness value) +{ + if (value) + outl(ALIX_LED3_ON, ALIX_LED3_PORT); + else + outl(ALIX_LED3_OFF, ALIX_LED3_PORT); +} + +static struct led_classdev alix_led_1 = { + .name = "alix:1", + .brightness_set = alix_led_set_1, +}; + +static struct led_classdev alix_led_2 = { + .name = "alix:2", + .brightness_set = alix_led_set_2, +}; + +static struct led_classdev alix_led_3 = { + .name = "alix:3", + .brightness_set = alix_led_set_3, +}; + + +#ifdef CONFIG_PM +static int alix_led_suspend(struct platform_device *dev, + pm_message_t state) +{ + led_classdev_suspend(&alix_led_1); + led_classdev_suspend(&alix_led_2); + led_classdev_suspend(&alix_led_3); + return 0; +} + +static int alix_led_resume(struct platform_device *dev) +{ + led_classdev_resume(&alix_led_1); + led_classdev_resume(&alix_led_2); + led_classdev_resume(&alix_led_3); + return 0; +} +#else +#define alix_led_suspend NULL +#define alix_led_resume NULL +#endif + +static int alix_led_probe(struct platform_device *pdev) +{ + int ret; + + ret = led_classdev_register(&pdev->dev, &alix_led_1); + if (ret >= 0) + { + ret = led_classdev_register(&pdev->dev, &alix_led_2); + if (ret >= 0) + { + ret = led_classdev_register(&pdev->dev, &alix_led_3); + if (ret < 0) + led_classdev_unregister(&alix_led_2); + } + if (ret < 0) + led_classdev_unregister(&alix_led_1); + } + return ret; +} + +static int alix_led_remove(struct platform_device *pdev) +{ + led_classdev_unregister(&alix_led_1); + led_classdev_unregister(&alix_led_2); + led_classdev_unregister(&alix_led_3); + return 0; +} + +static struct platform_driver alix_led_driver = { + .probe = alix_led_probe, + .remove = alix_led_remove, + .suspend = alix_led_suspend, + .resume = alix_led_resume, + .driver = { + .name = DRVNAME, + .owner = THIS_MODULE, + }, +}; + +static int __init alix_led_init(void) +{ + int ret; + + ret = platform_driver_register(&alix_led_driver); + if (ret < 0) + goto out; + + pdev = platform_device_register_simple(DRVNAME, -1, NULL, 0); + if (IS_ERR(pdev)) { + ret = PTR_ERR(pdev); + platform_driver_unregister(&alix_led_driver); + goto out; + } + +out: + return ret; +} + +static void __exit alix_led_exit(void) +{ + platform_device_unregister(pdev); + platform_driver_unregister(&alix_led_driver); +} + +module_init(alix_led_init); +module_exit(alix_led_exit); + +MODULE_AUTHOR("Petr Liebman"); +MODULE_DESCRIPTION("PCEngines ALIX LED driver"); +MODULE_LICENSE("GPL"); + diff --git a/target/linux/generic-2.6/files-2.6.27/drivers/leds/ledtrig-morse.c b/target/linux/generic-2.6/files-2.6.27/drivers/leds/ledtrig-morse.c new file mode 100644 index 000000000..cb47480a3 --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.27/drivers/leds/ledtrig-morse.c @@ -0,0 +1,365 @@ +/* + * LED Morse Trigger + * + * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org> + * + * This file was based on: drivers/led/ledtrig-timer.c + * Copyright 2005-2006 Openedhand Ltd. + * Author: Richard Purdie <rpurdie@openedhand.com> + * + * also based on the patch '[PATCH] 2.5.59 morse code panics' posted + * in the LKML by Tomas Szepe at Thu, 30 Jan 2003 + * Copyright (C) 2002 Andrew Rodland <arodland@noln.com> + * Copyright (C) 2003 Tomas Szepe <szepe@pinerecords.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/version.h> +#include <linux/module.h> +#include <linux/jiffies.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/spinlock.h> +#include <linux/device.h> +#include <linux/sysdev.h> +#include <linux/timer.h> +#include <linux/ctype.h> +#include <linux/leds.h> + +#include "leds.h" + +#define MORSE_DELAY_BASE (HZ/2) + +#define MORSE_STATE_BLINK_START 0 +#define MORSE_STATE_BLINK_STOP 1 + +#define MORSE_DIT_LEN 1 +#define MORSE_DAH_LEN 3 +#define MORSE_SPACE_LEN 7 + +struct morse_trig_data { + unsigned long delay; + char *msg; + + unsigned char morse; + unsigned char state; + char *msgpos; + struct timer_list timer; +}; + +const unsigned char morsetable[] = { + 0122, 0, 0310, 0, 0, 0163, /* "#$%&' */ + 055, 0155, 0, 0, 0163, 0141, 0152, 0051, /* ()*+,-./ */ + 077, 076, 074, 070, 060, 040, 041, 043, 047, 057, /* 0-9 */ + 0107, 0125, 0, 0061, 0, 0114, 0, /* :;<=>?@ */ + 006, 021, 025, 011, 002, 024, 013, 020, 004, /* A-I */ + 036, 015, 022, 007, 005, 017, 026, 033, 012, /* J-R */ + 010, 003, 014, 030, 016, 031, 035, 023, /* S-Z */ + 0, 0, 0, 0, 0154 /* [\]^_ */ +}; + +static inline unsigned char tomorse(char c) { + if (c >= 'a' && c <= 'z') + c = c - 'a' + 'A'; + if (c >= '"' && c <= '_') { + return morsetable[c - '"']; + } else + return 0; +} + +static inline unsigned long dit_len(struct morse_trig_data *morse_data) +{ + return MORSE_DIT_LEN*morse_data->delay; +} + +static inline unsigned long dah_len(struct morse_trig_data *morse_data) +{ + return MORSE_DAH_LEN*morse_data->delay; +} + +static inline unsigned long space_len(struct morse_trig_data *morse_data) +{ + return MORSE_SPACE_LEN*morse_data->delay; +} + +static void morse_timer_function(unsigned long data) +{ + struct led_classdev *led_cdev = (struct led_classdev *)data; + struct morse_trig_data *morse_data = led_cdev->trigger_data; + unsigned long brightness = LED_OFF; + unsigned long delay = 0; + + if (!morse_data->msg) + goto set_led; + + switch (morse_data->state) { + case MORSE_STATE_BLINK_START: + /* Starting a new blink. We have a valid code in morse. */ + delay = (morse_data->morse & 001) ? dah_len(morse_data): + dit_len(morse_data); + brightness = LED_FULL; + morse_data->state = MORSE_STATE_BLINK_STOP; + morse_data->morse >>= 1; + break; + case MORSE_STATE_BLINK_STOP: + /* Coming off of a blink. */ + morse_data->state = MORSE_STATE_BLINK_START; + + if (morse_data->morse > 1) { + /* Not done yet, just a one-dit pause. */ + delay = dit_len(morse_data); + break; + } + + /* Get a new char, figure out how much space. */ + /* First time through */ + if (!morse_data->msgpos) + morse_data->msgpos = (char *)morse_data->msg; + + if (!*morse_data->msgpos) { + /* Repeating */ + morse_data->msgpos = (char *)morse_data->msg; + delay = space_len(morse_data); + } else { + /* Inter-letter space */ + delay = dah_len(morse_data); + } + + if (!(morse_data->morse = tomorse(*morse_data->msgpos))) { + delay = space_len(morse_data); + /* And get us back here */ + morse_data->state = MORSE_STATE_BLINK_STOP; + } + morse_data->msgpos++; + break; + } + + mod_timer(&morse_data->timer, jiffies + msecs_to_jiffies(delay)); + +set_led: + led_set_brightness(led_cdev, brightness); +} + +static ssize_t _morse_delay_show(struct led_classdev *led_cdev, char *buf) +{ + struct morse_trig_data *morse_data = led_cdev->trigger_data; + + sprintf(buf, "%lu\n", morse_data->delay); + + return strlen(buf) + 1; +} + +static ssize_t _morse_delay_store(struct led_classdev *led_cdev, + const char *buf, size_t size) +{ + struct morse_trig_data *morse_data = led_cdev->trigger_data; + char *after; + unsigned long state = simple_strtoul(buf, &after, 10); + size_t count = after - buf; + int ret = -EINVAL; + + if (*after && isspace(*after)) + count++; + + if (count == size) { + morse_data->delay = state; + mod_timer(&morse_data->timer, jiffies + 1); + ret = count; + } + + return ret; +} + +static ssize_t _morse_msg_show(struct led_classdev *led_cdev, char *buf) +{ + struct morse_trig_data *morse_data = led_cdev->trigger_data; + + if (!morse_data->msg) + sprintf(buf, "<none>\n"); + else + sprintf(buf, "%s\n", morse_data->msg); + + return strlen(buf) + 1; +} + +static ssize_t _morse_msg_store(struct led_classdev *led_cdev, + const char *buf, size_t size) +{ + struct morse_trig_data *morse_data = led_cdev->trigger_data; + char *m; + + m = kmalloc(size, GFP_KERNEL); + if (!m) + return -ENOMEM; + + memcpy(m,buf,size); + m[size]='\0'; + + if (morse_data->msg) + kfree(morse_data->msg); + + morse_data->msg = m; + morse_data->msgpos = NULL; + morse_data->state = MORSE_STATE_BLINK_STOP; + + mod_timer(&morse_data->timer, jiffies + 1); + + return size; +} + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23) +static ssize_t morse_delay_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + + return _morse_delay_show(led_cdev, buf); +} + +static ssize_t morse_delay_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + + return _morse_delay_store(led_cdev, buf, size); +} + +static ssize_t morse_msg_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + + return _morse_msg_show(led_cdev, buf); +} + +static ssize_t morse_msg_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + + return _morse_msg_store(led_cdev, buf, size); +} + +static DEVICE_ATTR(delay, 0644, morse_delay_show, morse_delay_store); +static DEVICE_ATTR(message, 0644, morse_msg_show, morse_msg_store); + +#define led_device_create_file(leddev, attr) \ + device_create_file(leddev->dev, &dev_attr_ ## attr) +#define led_device_remove_file(leddev, attr) \ + device_remove_file(leddev->dev, &dev_attr_ ## attr) + +#else +static ssize_t morse_delay_show(struct class_device *dev, char *buf) +{ + struct led_classdev *led_cdev = class_get_devdata(dev); + + return _morse_delay_show(led_cdev, buf); +} + +static ssize_t morse_delay_store(struct class_device *dev, const char *buf, + size_t size) +{ + struct led_classdev *led_cdev = class_get_devdata(dev); + + return _morse_delay_store(led_cdev, buf, size); +} + +static ssize_t morse_msg_show(struct class_device *dev, char *buf) +{ + struct led_classdev *led_cdev = class_get_devdata(dev); + + return _morse_msg_show(led_cdev, buf); +} + +static ssize_t morse_msg_store(struct class_device *dev, const char *buf, + size_t size) +{ + struct led_classdev *led_cdev = class_get_devdata(dev); + + return _morse_msg_store(led_cdev, buf, size); +} + +static CLASS_DEVICE_ATTR(delay, 0644, morse_delay_show, morse_delay_store); +static CLASS_DEVICE_ATTR(message, 0644, morse_msg_show, morse_msg_store); + +#define led_device_create_file(leddev, attr) \ + class_device_create_file(leddev->class_dev, &class_device_attr_ ## attr) +#define led_device_remove_file(leddev, attr) \ + class_device_remove_file(leddev->class_dev, &class_device_attr_ ## attr) + +#endif + +static void morse_trig_activate(struct led_classdev *led_cdev) +{ + struct morse_trig_data *morse_data; + int rc; + + morse_data = kzalloc(sizeof(*morse_data), GFP_KERNEL); + if (!morse_data) + return; + + morse_data->delay = MORSE_DELAY_BASE; + init_timer(&morse_data->timer); + morse_data->timer.function = morse_timer_function; + morse_data->timer.data = (unsigned long)led_cdev; + + rc = led_device_create_file(led_cdev, delay); + if (rc) goto err; + + rc = led_device_create_file(led_cdev, message); + if (rc) goto err_delay; + + led_cdev->trigger_data = morse_data; + + return; + +err_delay: + led_device_remove_file(led_cdev, delay); +err: + kfree(morse_data); +} + +static void morse_trig_deactivate(struct led_classdev *led_cdev) +{ + struct morse_trig_data *morse_data = led_cdev->trigger_data; + + if (!morse_data) + return; + + led_device_remove_file(led_cdev, message); + led_device_remove_file(led_cdev, delay); + + del_timer_sync(&morse_data->timer); + if (morse_data->msg) + kfree(morse_data->msg); + + kfree(morse_data); +} + +static struct led_trigger morse_led_trigger = { + .name = "morse", + .activate = morse_trig_activate, + .deactivate = morse_trig_deactivate, +}; + +static int __init morse_trig_init(void) +{ + return led_trigger_register(&morse_led_trigger); +} + +static void __exit morse_trig_exit(void) +{ + led_trigger_unregister(&morse_led_trigger); +} + +module_init(morse_trig_init); +module_exit(morse_trig_exit); + +MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>"); +MODULE_DESCRIPTION("Morse LED trigger"); +MODULE_LICENSE("GPL"); diff --git a/target/linux/generic-2.6/files-2.6.27/drivers/leds/ledtrig-netdev.c b/target/linux/generic-2.6/files-2.6.27/drivers/leds/ledtrig-netdev.c new file mode 100644 index 000000000..fac3571bd --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.27/drivers/leds/ledtrig-netdev.c @@ -0,0 +1,451 @@ +/* + * LED Kernel Netdev Trigger + * + * Toggles the LED to reflect the link and traffic state of a named net device + * + * Copyright 2007 Oliver Jowett <oliver@opencloud.com> + * + * Derived from ledtrig-timer.c which is: + * Copyright 2005-2006 Openedhand Ltd. + * Author: Richard Purdie <rpurdie@openedhand.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/spinlock.h> +#include <linux/device.h> +#include <linux/sysdev.h> +#include <linux/netdevice.h> +#include <linux/timer.h> +#include <linux/ctype.h> +#include <linux/leds.h> +#include <linux/version.h> + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26) +#include <net/net_namespace.h> +#endif + +#include "leds.h" + +/* + * Configurable sysfs attributes: + * + * device_name - network device name to monitor + * + * interval - duration of LED blink, in milliseconds + * + * mode - either "none" (LED is off) or a space separated list of one or more of: + * link: LED's normal state reflects whether the link is up (has carrier) or not + * tx: LED blinks on transmitted data + * rx: LED blinks on receive data + * + * Some suggestions: + * + * Simple link status LED: + * $ echo netdev >someled/trigger + * $ echo eth0 >someled/device_name + * $ echo link >someled/mode + * + * Ethernet-style link/activity LED: + * $ echo netdev >someled/trigger + * $ echo eth0 >someled/device_name + * $ echo "link tx rx" >someled/mode + * + * Modem-style tx/rx LEDs: + * $ echo netdev >led1/trigger + * $ echo ppp0 >led1/device_name + * $ echo tx >led1/mode + * $ echo netdev >led2/trigger + * $ echo ppp0 >led2/device_name + * $ echo rx >led2/mode + * + */ + +#define MODE_LINK 1 +#define MODE_TX 2 +#define MODE_RX 4 + +struct led_netdev_data { + rwlock_t lock; + + struct timer_list timer; + struct notifier_block notifier; + + struct led_classdev *led_cdev; + struct net_device *net_dev; + + char device_name[IFNAMSIZ]; + unsigned interval; + unsigned mode; + unsigned link_up; + unsigned last_activity; +}; + +static void set_baseline_state(struct led_netdev_data *trigger_data) +{ + if ((trigger_data->mode & MODE_LINK) != 0 && trigger_data->link_up) + led_set_brightness(trigger_data->led_cdev, LED_FULL); + else + led_set_brightness(trigger_data->led_cdev, LED_OFF); + + if ((trigger_data->mode & (MODE_TX | MODE_RX)) != 0 && trigger_data->link_up) + mod_timer(&trigger_data->timer, jiffies + trigger_data->interval); + else + del_timer(&trigger_data->timer); +} + +static ssize_t led_device_name_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct led_netdev_data *trigger_data = led_cdev->trigger_data; + + read_lock(&trigger_data->lock); + sprintf(buf, "%s\n", trigger_data->device_name); + read_unlock(&trigger_data->lock); + + return strlen(buf) + 1; +} + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21) +extern struct net init_net; +#endif + +static ssize_t led_device_name_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct led_netdev_data *trigger_data = led_cdev->trigger_data; + + if (size < 0 || size >= IFNAMSIZ) + return -EINVAL; + + write_lock(&trigger_data->lock); + + strcpy(trigger_data->device_name, buf); + if (size > 0 && trigger_data->device_name[size-1] == '\n') + trigger_data->device_name[size-1] = 0; + + if (trigger_data->device_name[0] != 0) { + /* check for existing device to update from */ +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26) + trigger_data->net_dev = dev_get_by_name(&init_net, trigger_data->device_name); +#else + trigger_data->net_dev = dev_get_by_name(trigger_data->device_name); +#endif + if (trigger_data->net_dev != NULL) + trigger_data->link_up = (dev_get_flags(trigger_data->net_dev) & IFF_LOWER_UP) != 0; + set_baseline_state(trigger_data); /* updates LEDs, may start timers */ + } + + write_unlock(&trigger_data->lock); + return size; +} + +static DEVICE_ATTR(device_name, 0644, led_device_name_show, led_device_name_store); + +static ssize_t led_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct led_netdev_data *trigger_data = led_cdev->trigger_data; + + read_lock(&trigger_data->lock); + + if (trigger_data->mode == 0) { + strcpy(buf, "none\n"); + } else { + if (trigger_data->mode & MODE_LINK) + strcat(buf, "link "); + if (trigger_data->mode & MODE_TX) + strcat(buf, "tx "); + if (trigger_data->mode & MODE_RX) + strcat(buf, "rx "); + strcat(buf, "\n"); + } + + read_unlock(&trigger_data->lock); + + return strlen(buf)+1; +} + +static ssize_t led_mode_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct led_netdev_data *trigger_data = led_cdev->trigger_data; + char copybuf[1024]; + int new_mode = -1; + char *p, *token; + + /* take a copy since we don't want to trash the inbound buffer when using strsep */ + strncpy(copybuf, buf, sizeof(copybuf)); + copybuf[1023] = 0; + p = copybuf; + + while ((token = strsep(&p, " \t\n")) != NULL) { + if (!*token) + continue; + + if (new_mode == -1) + new_mode = 0; + + if (!strcmp(token, "none")) + new_mode = 0; + else if (!strcmp(token, "tx")) + new_mode |= MODE_TX; + else if (!strcmp(token, "rx")) + new_mode |= MODE_RX; + else if (!strcmp(token, "link")) + new_mode |= MODE_LINK; + else + return -EINVAL; + } + + if (new_mode == -1) + return -EINVAL; + + write_lock(&trigger_data->lock); + trigger_data->mode = new_mode; + set_baseline_state(trigger_data); + write_unlock(&trigger_data->lock); + + return size; +} + +static DEVICE_ATTR(mode, 0644, led_mode_show, led_mode_store); + +static ssize_t led_interval_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct led_netdev_data *trigger_data = led_cdev->trigger_data; + + read_lock(&trigger_data->lock); + sprintf(buf, "%u\n", jiffies_to_msecs(trigger_data->interval)); + read_unlock(&trigger_data->lock); + + return strlen(buf) + 1; +} + +static ssize_t led_interval_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct led_netdev_data *trigger_data = led_cdev->trigger_data; + int ret = -EINVAL; + char *after; + unsigned long value = simple_strtoul(buf, &after, 10); + size_t count = after - buf; + + if (*after && isspace(*after)) + count++; + + /* impose some basic bounds on the timer interval */ + if (count == size && value >= 5 && value <= 10000) { + write_lock(&trigger_data->lock); + trigger_data->interval = msecs_to_jiffies(value); + set_baseline_state(trigger_data); // resets timer + write_unlock(&trigger_data->lock); + ret = count; + } + + return ret; +} + +static DEVICE_ATTR(interval, 0644, led_interval_show, led_interval_store); + +static int netdev_trig_notify(struct notifier_block *nb, + unsigned long evt, + void *dv) +{ + struct net_device *dev = dv; + struct led_netdev_data *trigger_data = container_of(nb, struct led_netdev_data, notifier); + + if (evt != NETDEV_UP && evt != NETDEV_DOWN && evt != NETDEV_CHANGE && evt != NETDEV_REGISTER && evt != NETDEV_UNREGISTER) + return NOTIFY_DONE; + + write_lock(&trigger_data->lock); + + if (strcmp(dev->name, trigger_data->device_name)) + goto done; + + if (evt == NETDEV_REGISTER) { + if (trigger_data->net_dev != NULL) + dev_put(trigger_data->net_dev); + dev_hold(dev); + trigger_data->net_dev = dev; + trigger_data->link_up = 0; + goto done; + } + + if (evt == NETDEV_UNREGISTER && trigger_data->net_dev != NULL) { + dev_put(trigger_data->net_dev); + trigger_data->net_dev = NULL; + goto done; + } + + /* UP / DOWN / CHANGE */ + + trigger_data->link_up = (evt != NETDEV_DOWN && netif_carrier_ok(dev)); + set_baseline_state(trigger_data); + +done: + write_unlock(&trigger_data->lock); + return NOTIFY_DONE; +} + +/* here's the real work! */ +static void netdev_trig_timer(unsigned long arg) +{ + struct led_netdev_data *trigger_data = (struct led_netdev_data *)arg; + struct net_device_stats *dev_stats; + unsigned new_activity; + + write_lock(&trigger_data->lock); + + if (!trigger_data->link_up || !trigger_data->net_dev || (trigger_data->mode & (MODE_TX | MODE_RX)) == 0) { + /* we don't need to do timer work, just reflect link state. */ + led_set_brightness(trigger_data->led_cdev, ((trigger_data->mode & MODE_LINK) != 0 && trigger_data->link_up) ? LED_FULL : LED_OFF); + goto no_restart; + } + + dev_stats = trigger_data->net_dev->get_stats(trigger_data->net_dev); + new_activity = + ((trigger_data->mode & MODE_TX) ? dev_stats->tx_packets : 0) + + ((trigger_data->mode & MODE_RX) ? dev_stats->rx_packets : 0); + + if (trigger_data->mode & MODE_LINK) { + /* base state is ON (link present) */ + /* if there's no link, we don't get this far and the LED is off */ + + /* OFF -> ON always */ + /* ON -> OFF on activity */ + if (trigger_data->led_cdev->brightness == LED_OFF) { + led_set_brightness(trigger_data->led_cdev, LED_FULL); + } else if (trigger_data->last_activity != new_activity) { + led_set_brightness(trigger_data->led_cdev, LED_OFF); + } + } else { + /* base state is OFF */ + /* ON -> OFF always */ + /* OFF -> ON on activity */ + if (trigger_data->led_cdev->brightness == LED_FULL) { + led_set_brightness(trigger_data->led_cdev, LED_OFF); + } else if (trigger_data->last_activity != new_activity) { + led_set_brightness(trigger_data->led_cdev, LED_FULL); + } + } + + trigger_data->last_activity = new_activity; + mod_timer(&trigger_data->timer, jiffies + trigger_data->interval); + +no_restart: + write_unlock(&trigger_data->lock); +} + +static void netdev_trig_activate(struct led_classdev *led_cdev) +{ + struct led_netdev_data *trigger_data; + int rc; + + trigger_data = kzalloc(sizeof(struct led_netdev_data), GFP_KERNEL); + if (!trigger_data) + return; + + rwlock_init(&trigger_data->lock); + + trigger_data->notifier.notifier_call = netdev_trig_notify; + trigger_data->notifier.priority = 10; + + setup_timer(&trigger_data->timer, netdev_trig_timer, (unsigned long) trigger_data); + + trigger_data->led_cdev = led_cdev; + trigger_data->net_dev = NULL; + trigger_data->device_name[0] = 0; + + trigger_data->mode = 0; + trigger_data->interval = msecs_to_jiffies(50); + trigger_data->link_up = 0; + trigger_data->last_activity = 0; + + led_cdev->trigger_data = trigger_data; + + rc = device_create_file(led_cdev->dev, &dev_attr_device_name); + if (rc) + goto err_out; + rc = device_create_file(led_cdev->dev, &dev_attr_mode); + if (rc) + goto err_out_device_name; + rc = device_create_file(led_cdev->dev, &dev_attr_interval); + if (rc) + goto err_out_mode; + + register_netdevice_notifier(&trigger_data->notifier); + return; + +err_out_mode: + device_remove_file(led_cdev->dev, &dev_attr_mode); +err_out_device_name: + device_remove_file(led_cdev->dev, &dev_attr_device_name); +err_out: + led_cdev->trigger_data = NULL; + kfree(trigger_data); +} + +static void netdev_trig_deactivate(struct led_classdev *led_cdev) +{ + struct led_netdev_data *trigger_data = led_cdev->trigger_data; + + if (trigger_data) { + unregister_netdevice_notifier(&trigger_data->notifier); + + device_remove_file(led_cdev->dev, &dev_attr_device_name); + device_remove_file(led_cdev->dev, &dev_attr_mode); + device_remove_file(led_cdev->dev, &dev_attr_interval); + + write_lock(&trigger_data->lock); + + if (trigger_data->net_dev) { + dev_put(trigger_data->net_dev); + trigger_data->net_dev = NULL; + } + + write_unlock(&trigger_data->lock); + + del_timer_sync(&trigger_data->timer); + + kfree(trigger_data); + } +} + +static struct led_trigger netdev_led_trigger = { + .name = "netdev", + .activate = netdev_trig_activate, + .deactivate = netdev_trig_deactivate, +}; + +static int __init netdev_trig_init(void) +{ + return led_trigger_register(&netdev_led_trigger); +} + +static void __exit netdev_trig_exit(void) +{ + led_trigger_unregister(&netdev_led_trigger); +} + +module_init(netdev_trig_init); +module_exit(netdev_trig_exit); + +MODULE_AUTHOR("Oliver Jowett <oliver@opencloud.com>"); +MODULE_DESCRIPTION("Netdev LED trigger"); +MODULE_LICENSE("GPL"); diff --git a/target/linux/generic-2.6/files-2.6.27/drivers/net/phy/adm6996.c b/target/linux/generic-2.6/files-2.6.27/drivers/net/phy/adm6996.c new file mode 100644 index 000000000..3033813ec --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.27/drivers/net/phy/adm6996.c @@ -0,0 +1,170 @@ +/* + * ADM6996 switch driver + * + * Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License v2 as published by the + * Free Software Foundation + */ +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/unistd.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/spinlock.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/mii.h> +#include <linux/ethtool.h> +#include <linux/phy.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/uaccess.h> +#include "adm6996.h" + +MODULE_DESCRIPTION("Infineon ADM6996 Switch"); +MODULE_AUTHOR("Felix Fietkau"); +MODULE_LICENSE("GPL"); + +struct adm6996_priv { + /* use abstraction for regops, we want to add gpio support in the future */ + u16 (*read)(struct phy_device *phydev, enum admreg reg); + void (*write)(struct phy_device *phydev, enum admreg reg, u16 val); +}; + +#define to_adm(_phy) ((struct adm6996_priv *) (_phy)->priv) + + +static inline u16 +r16(struct phy_device *pdev, enum admreg reg) +{ + return to_adm(pdev)->read(pdev, reg); +} + +static inline void +w16(struct phy_device *pdev, enum admreg reg, u16 val) +{ + to_adm(pdev)->write(pdev, reg, val); +} + + +static u16 +adm6996_read_mii_reg(struct phy_device *phydev, enum admreg reg) +{ + return phydev->bus->read(phydev->bus, PHYADDR(reg)); +} + +static void +adm6996_write_mii_reg(struct phy_device *phydev, enum admreg reg, u16 val) +{ + phydev->bus->write(phydev->bus, PHYADDR(reg), val); +} + + +static int adm6996_config_init(struct phy_device *pdev) +{ + int i; + + printk("%s: ADM6996 PHY driver attached.\n", pdev->attached_dev->name); + pdev->supported = ADVERTISED_100baseT_Full; + pdev->advertising = ADVERTISED_100baseT_Full; + + /* initialize port and vlan settings */ + for (i = 0; i < ADM_PHY_PORTS; i++) { + w16(pdev, adm_portcfg[i], ADM_PORTCFG_INIT | + ADM_PORTCFG_PVID((i == ADM_WAN_PORT) ? 1 : 0)); + } + w16(pdev, adm_portcfg[5], ADM_PORTCFG_CPU); + + /* reset all ports */ + for (i = 0; i < ADM_PHY_PORTS; i++) { + w16(pdev, ADM_PHY_PORT(i), ADM_PHYCFG_INIT); + } + + return 0; +} + +static int adm6996_read_status(struct phy_device *phydev) +{ + phydev->speed = SPEED_100; + phydev->duplex = DUPLEX_FULL; + phydev->state = PHY_UP; + return 0; +} + +static int adm6996_config_aneg(struct phy_device *phydev) +{ + return 0; +} + +static int adm6996_probe(struct phy_device *pdev) +{ + struct adm6996_priv *priv; + + priv = kzalloc(sizeof(struct adm6996_priv), GFP_KERNEL); + if (priv == NULL) + return -ENOMEM; + + priv->read = adm6996_read_mii_reg; + priv->write = adm6996_write_mii_reg; + pdev->priv = priv; + return 0; +} + +static void adm6996_remove(struct phy_device *pdev) +{ + kfree(pdev->priv); +} + +static bool adm6996_detect(struct mii_bus *bus, int addr) +{ + u16 reg; + + /* we only attach to phy id 0 */ + if (addr != 0) + return false; + + /* look for the switch on the bus */ + reg = bus->read(bus, PHYADDR(ADM_SIG0)) & ADM_SIG0_MASK; + if (reg != ADM_SIG0_VAL) + return false; + + reg = bus->read(bus, PHYADDR(ADM_SIG1)) & ADM_SIG1_MASK; + if (reg != ADM_SIG1_VAL) + return false; + + return true; +} + +static struct phy_driver adm6996_driver = { + .name = "Infineon ADM6996", + .features = PHY_BASIC_FEATURES, + .detect = adm6996_detect, + .probe = adm6996_probe, + .remove = adm6996_remove, + .config_init = &adm6996_config_init, + .config_aneg = &adm6996_config_aneg, + .read_status = &adm6996_read_status, + .driver = { .owner = THIS_MODULE,}, +}; + +static int __init adm6996_init(void) +{ + return phy_driver_register(&adm6996_driver); +} + +static void __exit adm6996_exit(void) +{ + phy_driver_unregister(&adm6996_driver); +} + +module_init(adm6996_init); +module_exit(adm6996_exit); diff --git a/target/linux/generic-2.6/files-2.6.27/drivers/net/phy/adm6996.h b/target/linux/generic-2.6/files-2.6.27/drivers/net/phy/adm6996.h new file mode 100644 index 000000000..e07490151 --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.27/drivers/net/phy/adm6996.h @@ -0,0 +1,105 @@ +/* + * ADM6996 switch driver + * + * Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License v2 as published by the + * Free Software Foundation + */ +#ifndef __ADM6996_H +#define __ADM6996_H + +#define ADM_PHY_PORTS 5 +#define ADM_CPU_PORT 5 +#define ADM_WAN_PORT 0 /* FIXME: dynamic ? */ + +enum admreg { + ADM_EEPROM_BASE = 0x0, + ADM_P0_CFG = ADM_EEPROM_BASE + 1, + ADM_P1_CFG = ADM_EEPROM_BASE + 3, + ADM_P2_CFG = ADM_EEPROM_BASE + 5, + ADM_P3_CFG = ADM_EEPROM_BASE + 7, + ADM_P4_CFG = ADM_EEPROM_BASE + 8, + ADM_P5_CFG = ADM_EEPROM_BASE + 9, + ADM_EEPROM_EXT_BASE = 0x40, + ADM_COUNTER_BASE = 0xa0, + ADM_SIG0 = ADM_COUNTER_BASE + 0, + ADM_SIG1 = ADM_COUNTER_BASE + 1, + ADM_PHY_BASE = 0x200, +#define ADM_PHY_PORT(n) (ADM_PHY_BASE + (0x20 * n)) +}; + +/* Chip identification patterns */ +#define ADM_SIG0_MASK 0xfff0 +#define ADM_SIG0_VAL 0x1020 +#define ADM_SIG1_MASK 0xffff +#define ADM_SIG1_VAL 0x0007 + +enum { + ADM_PHYCFG_COLTST = (1 << 7), /* Enable collision test */ + ADM_PHYCFG_DPLX = (1 << 8), /* Enable full duplex */ + ADM_PHYCFG_ANEN_RST = (1 << 9), /* Restart auto negotiation (self clear) */ + ADM_PHYCFG_ISO = (1 << 10), /* Isolate PHY */ + ADM_PHYCFG_PDN = (1 << 11), /* Power down PHY */ + ADM_PHYCFG_ANEN = (1 << 12), /* Enable auto negotiation */ + ADM_PHYCFG_SPEED_100 = (1 << 13), /* Enable 100 Mbit/s */ + ADM_PHYCFG_LPBK = (1 << 14), /* Enable loopback operation */ + ADM_PHYCFG_RST = (1 << 15), /* Reset the port (self clear) */ + ADM_PHYCFG_INIT = ( + ADM_PHYCFG_RST | + ADM_PHYCFG_SPEED_100 | + ADM_PHYCFG_ANEN | + ADM_PHYCFG_ANEN_RST + ) +}; + +enum { + ADM_PORTCFG_FC = (1 << 0), /* Enable 802.x flow control */ + ADM_PORTCFG_AN = (1 << 1), /* Enable auto-negotiation */ + ADM_PORTCFG_SPEED_100 = (1 << 2), /* Enable 100 Mbit/s */ + ADM_PORTCFG_DPLX = (1 << 3), /* Enable full duplex */ + ADM_PORTCFG_OT = (1 << 4), /* Output tagged packets */ + ADM_PORTCFG_PD = (1 << 5), /* Port disable */ + ADM_PORTCFG_TV_PRIO = (1 << 6), /* 0 = VLAN based priority + * 1 = TOS based priority */ + ADM_PORTCFG_PPE = (1 << 7), /* Port based priority enable */ + ADM_PORTCFG_PP_S = (1 << 8), /* Port based priority, 2 bits */ + ADM_PORTCFG_PVID_BASE = (1 << 10), /* Primary VLAN id, 4 bits */ + ADM_PORTCFG_FSE = (1 << 14), /* Fx select enable */ + ADM_PORTCFG_CAM = (1 << 15), /* Crossover Auto MDIX */ + + ADM_PORTCFG_INIT = ( + ADM_PORTCFG_FC | + ADM_PORTCFG_AN | + ADM_PORTCFG_SPEED_100 | + ADM_PORTCFG_DPLX | + ADM_PORTCFG_CAM + ), + ADM_PORTCFG_CPU = ( + ADM_PORTCFG_FC | + ADM_PORTCFG_SPEED_100 | + ADM_PORTCFG_OT | + ADM_PORTCFG_DPLX + ), +}; + +#define ADM_PORTCFG_PPID(N) ((n & 0x3) << 8) +#define ADM_PORTCFG_PVID(n) ((n & 0xf) << 10) + +static const u8 adm_portcfg[] = { + [0] = ADM_P0_CFG, + [1] = ADM_P1_CFG, + [2] = ADM_P2_CFG, + [3] = ADM_P3_CFG, + [4] = ADM_P4_CFG, + [5] = ADM_P5_CFG, +}; + +/* + * Split the register address in phy id and register + * it will get combined again by the mdio bus op + */ +#define PHYADDR(_reg) ((_reg >> 5) & 0xff), (_reg & 0x1f) + +#endif diff --git a/target/linux/generic-2.6/files-2.6.27/drivers/net/phy/mvswitch.c b/target/linux/generic-2.6/files-2.6.27/drivers/net/phy/mvswitch.c new file mode 100644 index 000000000..78e5afe9b --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.27/drivers/net/phy/mvswitch.c @@ -0,0 +1,474 @@ +/* + * Marvell 88E6060 switch driver + * Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License v2 as published by the + * Free Software Foundation + */ +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/unistd.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/spinlock.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/mii.h> +#include <linux/ethtool.h> +#include <linux/phy.h> +#include <linux/if_vlan.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/uaccess.h> +#include "mvswitch.h" + +/* Undefine this to use trailer mode instead. + * I don't know if header mode works with all chips */ +#define HEADER_MODE 1 + +MODULE_DESCRIPTION("Marvell 88E6060 Switch driver"); +MODULE_AUTHOR("Felix Fietkau"); +MODULE_LICENSE("GPL"); + +struct mvswitch_priv { + /* the driver's tx function */ + int (*hardstart)(struct sk_buff *skb, struct net_device *dev); + struct vlan_group *grp; + u8 vlans[16]; +}; + +#define to_mvsw(_phy) ((struct mvswitch_priv *) (_phy)->priv) + +static inline u16 +r16(struct phy_device *phydev, int addr, int reg) +{ + return phydev->bus->read(phydev->bus, addr, reg); +} + +static inline void +w16(struct phy_device *phydev, int addr, int reg, u16 val) +{ + phydev->bus->write(phydev->bus, addr, reg, val); +} + + +static int +mvswitch_mangle_tx(struct sk_buff *skb, struct net_device *dev) +{ + struct mvswitch_priv *priv; + char *buf = NULL; + u16 vid; + + priv = dev->phy_ptr; + if (unlikely(!priv)) + goto error; + + if (unlikely(skb->len < 16)) + goto error; + +#ifdef HEADER_MODE + if (__vlan_hwaccel_get_tag(skb, &vid)) + goto error; + + if (skb_cloned(skb) || (skb->len <= 62) || (skb_headroom(skb) < MV_HEADER_SIZE)) { + if (pskb_expand_head(skb, MV_HEADER_SIZE, (skb->len < 62 ? 62 - skb->len : 0), GFP_ATOMIC)) + goto error_expand; + if (skb->len < 62) + skb->len = 62; + } + buf = skb_push(skb, MV_HEADER_SIZE); +#else + if (__vlan_get_tag(skb, &vid)) + goto error; + + if (unlikely((vid > 15 || !priv->vlans[vid]))) + goto error; + + if (skb->len <= 64) { + if (pskb_expand_head(skb, 0, 64 + MV_TRAILER_SIZE - skb->len, GFP_ATOMIC)) + goto error_expand; + + buf = skb->data + 64; + skb->len = 64 + MV_TRAILER_SIZE; + } else { + if (skb_cloned(skb) || unlikely(skb_tailroom(skb) < 4)) { + if (pskb_expand_head(skb, 0, 4, GFP_ATOMIC)) + goto error_expand; + } + buf = skb_put(skb, 4); + } + + /* move the ethernet header 4 bytes forward, overwriting the vlan tag */ + memmove(skb->data + 4, skb->data, 12); + skb->data += 4; + skb->len -= 4; + skb->mac_header += 4; +#endif + + if (!buf) + goto error; + + +#ifdef HEADER_MODE + /* prepend the tag */ + *((__be16 *) buf) = cpu_to_be16( + ((vid << MV_HEADER_VLAN_S) & MV_HEADER_VLAN_M) | + ((priv->vlans[vid] << MV_HEADER_PORTS_S) & MV_HEADER_PORTS_M) + ); +#else + /* append the tag */ + *((__be32 *) buf) = cpu_to_be32(( + (MV_TRAILER_OVERRIDE << MV_TRAILER_FLAGS_S) | + ((priv->vlans[vid] & MV_TRAILER_PORTS_M) << MV_TRAILER_PORTS_S) + )); +#endif + + return priv->hardstart(skb, dev); + +error_expand: + if (net_ratelimit()) + printk("%s: failed to expand/update skb for the switch\n", dev->name); + +error: + /* any errors? drop the packet! */ + dev_kfree_skb_any(skb); + return 0; +} + +static int +mvswitch_mangle_rx(struct sk_buff *skb, int napi) +{ + struct mvswitch_priv *priv; + struct net_device *dev; + int vlan = -1; + unsigned char *buf; + int i; + + dev = skb->dev; + if (!dev) + goto error; + + priv = dev->phy_ptr; + if (!priv) + goto error; + + if (!priv->grp) + goto error; + +#ifdef HEADER_MODE + buf = skb->data; + skb_pull(skb, MV_HEADER_SIZE); +#else + buf = skb->data + skb->len - MV_TRAILER_SIZE; + if (buf[0] != 0x80) + goto error; +#endif + + /* look for the vlan matching the incoming port */ + for (i = 0; i < ARRAY_SIZE(priv->vlans); i++) { + if ((1 << buf[1]) & priv->vlans[i]) + vlan = i; + } + + if (vlan == -1) + goto error; + + skb->protocol = eth_type_trans(skb, skb->dev); + + if (napi) + return vlan_hwaccel_receive_skb(skb, priv->grp, vlan); + else + return vlan_hwaccel_rx(skb, priv->grp, vlan); + +error: + /* no vlan? eat the packet! */ + dev_kfree_skb_any(skb); + return 0; +} + + +static int +mvswitch_netif_rx(struct sk_buff *skb) +{ + return mvswitch_mangle_rx(skb, 0); +} + +static int +mvswitch_netif_receive_skb(struct sk_buff *skb) +{ + return mvswitch_mangle_rx(skb, 1); +} + + +static void +mvswitch_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) +{ + struct mvswitch_priv *priv = dev->phy_ptr; + priv->grp = grp; +} + + +static int +mvswitch_wait_mask(struct phy_device *pdev, int addr, int reg, u16 mask, u16 val) +{ + int i = 100; + u16 r; + + do { + r = r16(pdev, addr, reg) & mask; + if (r == val) + return 0; + } while(--i > 0); + return -ETIMEDOUT; +} + +static int +mvswitch_config_init(struct phy_device *pdev) +{ + struct mvswitch_priv *priv = to_mvsw(pdev); + struct net_device *dev = pdev->attached_dev; + u8 vlmap = 0; + int i; + + if (!dev) + return -EINVAL; + + printk("%s: Marvell 88E6060 PHY driver attached.\n", dev->name); + pdev->supported = ADVERTISED_100baseT_Full; + pdev->advertising = ADVERTISED_100baseT_Full; + dev->phy_ptr = priv; + dev->irq = PHY_POLL; + + /* initialize default vlans */ + for (i = 0; i < MV_PORTS; i++) + priv->vlans[(i == MV_WANPORT ? 1 : 0)] |= (1 << i); + + /* before entering reset, disable all ports */ + for (i = 0; i < MV_PORTS; i++) + w16(pdev, MV_PORTREG(CONTROL, i), 0x00); + + msleep(2); /* wait for the status change to settle in */ + + /* put the ATU in reset */ + w16(pdev, MV_SWITCHREG(ATU_CTRL), MV_ATUCTL_RESET); + + i = mvswitch_wait_mask(pdev, MV_SWITCHREG(ATU_CTRL), MV_ATUCTL_RESET, 0); + if (i < 0) { + printk("%s: Timeout waiting for the switch to reset.\n", dev->name); + return i; + } + + /* set the ATU flags */ + w16(pdev, MV_SWITCHREG(ATU_CTRL), + MV_ATUCTL_NO_LEARN | + MV_ATUCTL_ATU_1K | + MV_ATUCTL_AGETIME(MV_ATUCTL_AGETIME_MIN) /* minimum without disabling ageing */ + ); + + /* initialize the cpu port */ + w16(pdev, MV_PORTREG(CONTROL, MV_CPUPORT), +#ifdef HEADER_MODE + MV_PORTCTRL_HEADER | +#else + MV_PORTCTRL_RXTR | + MV_PORTCTRL_TXTR | +#endif + MV_PORTCTRL_ENABLED + ); + /* wait for the phy change to settle in */ + msleep(2); + for (i = 0; i < MV_PORTS; i++) { + u8 pvid = 0; + int j; + + vlmap = 0; + + /* look for the matching vlan */ + for (j = 0; j < ARRAY_SIZE(priv->vlans); j++) { + if (priv->vlans[j] & (1 << i)) { + vlmap = priv->vlans[j]; + pvid = j; + } + } + /* leave port unconfigured if it's not part of a vlan */ + if (!vlmap) + continue; + + /* add the cpu port to the allowed destinations list */ + vlmap |= (1 << MV_CPUPORT); + + /* take port out of its own vlan destination map */ + vlmap &= ~(1 << i); + + /* apply vlan settings */ + w16(pdev, MV_PORTREG(VLANMAP, i), + MV_PORTVLAN_PORTS(vlmap) | + MV_PORTVLAN_ID(i) + ); + + /* re-enable port */ + w16(pdev, MV_PORTREG(CONTROL, i), + MV_PORTCTRL_ENABLED + ); + } + + w16(pdev, MV_PORTREG(VLANMAP, MV_CPUPORT), + MV_PORTVLAN_ID(MV_CPUPORT) + ); + + /* set the port association vector */ + for (i = 0; i <= MV_PORTS; i++) { + w16(pdev, MV_PORTREG(ASSOC, i), + MV_PORTASSOC_PORTS(1 << i) + ); + } + + /* init switch control */ + w16(pdev, MV_SWITCHREG(CTRL), + MV_SWITCHCTL_MSIZE | + MV_SWITCHCTL_DROP + ); + + /* hook into the tx function */ + priv->hardstart = dev->hard_start_xmit; + pdev->netif_receive_skb = mvswitch_netif_receive_skb; + pdev->netif_rx = mvswitch_netif_rx; + dev->hard_start_xmit = mvswitch_mangle_tx; + dev->vlan_rx_register = mvswitch_vlan_rx_register; +#ifdef HEADER_MODE + dev->features |= NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX; +#else + dev->features |= NETIF_F_HW_VLAN_RX; +#endif + + return 0; +} + +static int +mvswitch_read_status(struct phy_device *pdev) +{ + pdev->speed = SPEED_100; + pdev->duplex = DUPLEX_FULL; + pdev->state = PHY_UP; + + /* XXX ugly workaround: we can't force the switch + * to gracefully handle hosts moving from one port to another, + * so we have to regularly clear the ATU database */ + + /* wait for the ATU to become available */ + mvswitch_wait_mask(pdev, MV_SWITCHREG(ATU_OP), MV_ATUOP_INPROGRESS, 0); + + /* flush the ATU */ + w16(pdev, MV_SWITCHREG(ATU_OP), + MV_ATUOP_INPROGRESS | + MV_ATUOP_FLUSH_ALL + ); + + /* wait for operation to complete */ + mvswitch_wait_mask(pdev, MV_SWITCHREG(ATU_OP), MV_ATUOP_INPROGRESS, 0); + + return 0; +} + +static int +mvswitch_config_aneg(struct phy_device *phydev) +{ + return 0; +} + +static void +mvswitch_remove(struct phy_device *pdev) +{ + struct mvswitch_priv *priv = to_mvsw(pdev); + struct net_device *dev = pdev->attached_dev; + + /* restore old xmit handler */ + if (priv->hardstart && dev) + dev->hard_start_xmit = priv->hardstart; + dev->vlan_rx_register = NULL; + dev->vlan_rx_kill_vid = NULL; + dev->phy_ptr = NULL; + dev->features &= ~NETIF_F_HW_VLAN_RX; + kfree(priv); +} + +static bool +mvswitch_detect(struct mii_bus *bus, int addr) +{ + u16 reg; + int i; + + /* we attach to phy id 31 to make sure that the late probe works */ + if (addr != 31) + return false; + + /* look for the switch on the bus */ + reg = bus->read(bus, MV_PORTREG(IDENT, 0)) & MV_IDENT_MASK; + if (reg != MV_IDENT_VALUE) + return false; + + /* + * Now that we've established that the switch actually exists, let's + * get rid of the competition :) + */ + for (i = 0; i < 31; i++) { + if (!bus->phy_map[i]) + continue; + + device_unregister(&bus->phy_map[i]->dev); + kfree(bus->phy_map[i]); + bus->phy_map[i] = NULL; + } + + return true; +} + +static int +mvswitch_probe(struct phy_device *pdev) +{ + struct mvswitch_priv *priv; + + priv = kzalloc(sizeof(struct mvswitch_priv), GFP_KERNEL); + if (priv == NULL) + return -ENOMEM; + + pdev->priv = priv; + + return 0; +} + + +static struct phy_driver mvswitch_driver = { + .name = "Marvell 88E6060", + .features = PHY_BASIC_FEATURES, + .detect = &mvswitch_detect, + .probe = &mvswitch_probe, + .remove = &mvswitch_remove, + .config_init = &mvswitch_config_init, + .config_aneg = &mvswitch_config_aneg, + .read_status = &mvswitch_read_status, + .driver = { .owner = THIS_MODULE,}, +}; + +static int __init +mvswitch_init(void) +{ + return phy_driver_register(&mvswitch_driver); +} + +static void __exit +mvswitch_exit(void) +{ + phy_driver_unregister(&mvswitch_driver); +} + +module_init(mvswitch_init); +module_exit(mvswitch_exit); diff --git a/target/linux/generic-2.6/files-2.6.27/drivers/net/phy/mvswitch.h b/target/linux/generic-2.6/files-2.6.27/drivers/net/phy/mvswitch.h new file mode 100644 index 000000000..1563eec4d --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.27/drivers/net/phy/mvswitch.h @@ -0,0 +1,145 @@ +/* + * Marvell 88E6060 switch driver + * Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License v2 as published by the + * Free Software Foundation + */ +#ifndef __MVSWITCH_H +#define __MVSWITCH_H + +#define MV_HEADER_SIZE 2 +#define MV_HEADER_PORTS_M 0x001f +#define MV_HEADER_PORTS_S 0 +#define MV_HEADER_VLAN_M 0xf000 +#define MV_HEADER_VLAN_S 12 + +#define MV_TRAILER_SIZE 4 +#define MV_TRAILER_PORTS_M 0x1f +#define MV_TRAILER_PORTS_S 16 +#define MV_TRAILER_FLAGS_S 24 +#define MV_TRAILER_OVERRIDE 0x80 + + +#define MV_PORTS 5 +#define MV_WANPORT 4 +#define MV_CPUPORT 5 + +#define MV_BASE 0x10 + +#define MV_PHYPORT_BASE (MV_BASE + 0x0) +#define MV_PHYPORT(_n) (MV_PHYPORT_BASE + (_n)) +#define MV_SWITCHPORT_BASE (MV_BASE + 0x8) +#define MV_SWITCHPORT(_n) (MV_SWITCHPORT_BASE + (_n)) +#define MV_SWITCHREGS (MV_BASE + 0xf) + +enum { + MV_PHY_CONTROL = 0x00, + MV_PHY_STATUS = 0x01, + MV_PHY_IDENT0 = 0x02, + MV_PHY_IDENT1 = 0x03, + MV_PHY_ANEG = 0x04, + MV_PHY_LINK_ABILITY = 0x05, + MV_PHY_ANEG_EXPAND = 0x06, + MV_PHY_XMIT_NEXTP = 0x07, + MV_PHY_LINK_NEXTP = 0x08, + MV_PHY_CONTROL1 = 0x10, + MV_PHY_STATUS1 = 0x11, + MV_PHY_INTR_EN = 0x12, + MV_PHY_INTR_STATUS = 0x13, + MV_PHY_INTR_PORT = 0x14, + MV_PHY_RECV_COUNTER = 0x16, + MV_PHY_LED_PARALLEL = 0x16, + MV_PHY_LED_STREAM = 0x17, + MV_PHY_LED_CTRL = 0x18, + MV_PHY_LED_OVERRIDE = 0x19, + MV_PHY_VCT_CTRL = 0x1a, + MV_PHY_VCT_STATUS = 0x1b, + MV_PHY_CONTROL2 = 0x1e +}; +#define MV_PHYREG(_type, _port) MV_PHYPORT(_port), MV_PHY_##_type + +enum { + MV_PORT_STATUS = 0x00, + MV_PORT_IDENT = 0x03, + MV_PORT_CONTROL = 0x04, + MV_PORT_VLANMAP = 0x06, + MV_PORT_ASSOC = 0x0b, + MV_PORT_RXCOUNT = 0x10, + MV_PORT_TXCOUNT = 0x11, +}; +#define MV_PORTREG(_type, _port) MV_SWITCHPORT(_port), MV_PORT_##_type + +enum { + MV_PORTCTRL_BLOCK = (1 << 0), + MV_PORTCTRL_LEARN = (2 << 0), + MV_PORTCTRL_ENABLED = (3 << 0), + MV_PORTCTRL_VLANTUN = (1 << 7), /* Enforce VLANs on packets */ + MV_PORTCTRL_RXTR = (1 << 8), /* Enable Marvell packet trailer for ingress */ + MV_PORTCTRL_HEADER = (1 << 11), /* Enable Marvell packet header mode for port */ + MV_PORTCTRL_TXTR = (1 << 14), /* Enable Marvell packet trailer for egress */ + MV_PORTCTRL_FORCEFL = (1 << 15), /* force flow control */ +}; + +#define MV_PORTVLAN_ID(_n) (((_n) & 0xf) << 12) +#define MV_PORTVLAN_PORTS(_n) ((_n) & 0x3f) + +#define MV_PORTASSOC_PORTS(_n) ((_n) & 0x1f) +#define MV_PORTASSOC_MONITOR (1 << 15) + +enum { + MV_SWITCH_MAC0 = 0x01, + MV_SWITCH_MAC1 = 0x02, + MV_SWITCH_MAC2 = 0x03, + MV_SWITCH_CTRL = 0x04, + MV_SWITCH_ATU_CTRL = 0x0a, + MV_SWITCH_ATU_OP = 0x0b, + MV_SWITCH_ATU_DATA = 0x0c, + MV_SWITCH_ATU_MAC0 = 0x0d, + MV_SWITCH_ATU_MAC1 = 0x0e, + MV_SWITCH_ATU_MAC2 = 0x0f, +}; +#define MV_SWITCHREG(_type) MV_SWITCHREGS, MV_SWITCH_##_type + +enum { + MV_SWITCHCTL_EEIE = (1 << 0), /* EEPROM interrupt enable */ + MV_SWITCHCTL_PHYIE = (1 << 1), /* PHY interrupt enable */ + MV_SWITCHCTL_ATUDONE= (1 << 2), /* ATU done interrupt enable */ + MV_SWITCHCTL_ATUIE = (1 << 3), /* ATU interrupt enable */ + MV_SWITCHCTL_CTRMODE= (1 << 8), /* statistics for rx and tx errors */ + MV_SWITCHCTL_RELOAD = (1 << 9), /* reload registers from eeprom */ + MV_SWITCHCTL_MSIZE = (1 << 10), /* increase maximum frame size */ + MV_SWITCHCTL_DROP = (1 << 13), /* discard frames with excessive collisions */ +}; + +enum { +#define MV_ATUCTL_AGETIME_MIN 16 +#define MV_ATUCTL_AGETIME_MAX 4080 +#define MV_ATUCTL_AGETIME(_n) ((((_n) / 16) & 0xff) << 4) + MV_ATUCTL_ATU_256 = (0 << 12), + MV_ATUCTL_ATU_512 = (1 << 12), + MV_ATUCTL_ATU_1K = (2 << 12), + MV_ATUCTL_ATUMASK = (3 << 12), + MV_ATUCTL_NO_LEARN = (1 << 14), + MV_ATUCTL_RESET = (1 << 15), +}; + +enum { +#define MV_ATUOP_DBNUM(_n) ((_n) & 0x0f) + + MV_ATUOP_NOOP = (0 << 12), + MV_ATUOP_FLUSH_ALL = (1 << 12), + MV_ATUOP_FLUSH_U = (2 << 12), + MV_ATUOP_LOAD_DB = (3 << 12), + MV_ATUOP_GET_NEXT = (4 << 12), + MV_ATUOP_FLUSH_DB = (5 << 12), + MV_ATUOP_FLUSH_DB_UU= (6 << 12), + + MV_ATUOP_INPROGRESS = (1 << 15), +}; + +#define MV_IDENT_MASK 0xfff0 +#define MV_IDENT_VALUE 0x0600 + +#endif |