diff options
Diffstat (limited to 'target/linux/generic-2.6/files-2.6.25/drivers/net')
4 files changed, 0 insertions, 894 deletions
diff --git a/target/linux/generic-2.6/files-2.6.25/drivers/net/phy/adm6996.c b/target/linux/generic-2.6/files-2.6.25/drivers/net/phy/adm6996.c deleted file mode 100644 index 3033813ec..000000000 --- a/target/linux/generic-2.6/files-2.6.25/drivers/net/phy/adm6996.c +++ /dev/null @@ -1,170 +0,0 @@ -/* - * ADM6996 switch driver - * - * Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License v2 as published by the - * Free Software Foundation - */ -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/unistd.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/spinlock.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/mii.h> -#include <linux/ethtool.h> -#include <linux/phy.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include "adm6996.h" - -MODULE_DESCRIPTION("Infineon ADM6996 Switch"); -MODULE_AUTHOR("Felix Fietkau"); -MODULE_LICENSE("GPL"); - -struct adm6996_priv { - /* use abstraction for regops, we want to add gpio support in the future */ - u16 (*read)(struct phy_device *phydev, enum admreg reg); - void (*write)(struct phy_device *phydev, enum admreg reg, u16 val); -}; - -#define to_adm(_phy) ((struct adm6996_priv *) (_phy)->priv) - - -static inline u16 -r16(struct phy_device *pdev, enum admreg reg) -{ - return to_adm(pdev)->read(pdev, reg); -} - -static inline void -w16(struct phy_device *pdev, enum admreg reg, u16 val) -{ - to_adm(pdev)->write(pdev, reg, val); -} - - -static u16 -adm6996_read_mii_reg(struct phy_device *phydev, enum admreg reg) -{ - return phydev->bus->read(phydev->bus, PHYADDR(reg)); -} - -static void -adm6996_write_mii_reg(struct phy_device *phydev, enum admreg reg, u16 val) -{ - phydev->bus->write(phydev->bus, PHYADDR(reg), val); -} - - -static int adm6996_config_init(struct phy_device *pdev) -{ - int i; - - printk("%s: ADM6996 PHY driver attached.\n", pdev->attached_dev->name); - pdev->supported = ADVERTISED_100baseT_Full; - pdev->advertising = ADVERTISED_100baseT_Full; - - /* initialize port and vlan settings */ - for (i = 0; i < ADM_PHY_PORTS; i++) { - w16(pdev, adm_portcfg[i], ADM_PORTCFG_INIT | - ADM_PORTCFG_PVID((i == ADM_WAN_PORT) ? 1 : 0)); - } - w16(pdev, adm_portcfg[5], ADM_PORTCFG_CPU); - - /* reset all ports */ - for (i = 0; i < ADM_PHY_PORTS; i++) { - w16(pdev, ADM_PHY_PORT(i), ADM_PHYCFG_INIT); - } - - return 0; -} - -static int adm6996_read_status(struct phy_device *phydev) -{ - phydev->speed = SPEED_100; - phydev->duplex = DUPLEX_FULL; - phydev->state = PHY_UP; - return 0; -} - -static int adm6996_config_aneg(struct phy_device *phydev) -{ - return 0; -} - -static int adm6996_probe(struct phy_device *pdev) -{ - struct adm6996_priv *priv; - - priv = kzalloc(sizeof(struct adm6996_priv), GFP_KERNEL); - if (priv == NULL) - return -ENOMEM; - - priv->read = adm6996_read_mii_reg; - priv->write = adm6996_write_mii_reg; - pdev->priv = priv; - return 0; -} - -static void adm6996_remove(struct phy_device *pdev) -{ - kfree(pdev->priv); -} - -static bool adm6996_detect(struct mii_bus *bus, int addr) -{ - u16 reg; - - /* we only attach to phy id 0 */ - if (addr != 0) - return false; - - /* look for the switch on the bus */ - reg = bus->read(bus, PHYADDR(ADM_SIG0)) & ADM_SIG0_MASK; - if (reg != ADM_SIG0_VAL) - return false; - - reg = bus->read(bus, PHYADDR(ADM_SIG1)) & ADM_SIG1_MASK; - if (reg != ADM_SIG1_VAL) - return false; - - return true; -} - -static struct phy_driver adm6996_driver = { - .name = "Infineon ADM6996", - .features = PHY_BASIC_FEATURES, - .detect = adm6996_detect, - .probe = adm6996_probe, - .remove = adm6996_remove, - .config_init = &adm6996_config_init, - .config_aneg = &adm6996_config_aneg, - .read_status = &adm6996_read_status, - .driver = { .owner = THIS_MODULE,}, -}; - -static int __init adm6996_init(void) -{ - return phy_driver_register(&adm6996_driver); -} - -static void __exit adm6996_exit(void) -{ - phy_driver_unregister(&adm6996_driver); -} - -module_init(adm6996_init); -module_exit(adm6996_exit); diff --git a/target/linux/generic-2.6/files-2.6.25/drivers/net/phy/adm6996.h b/target/linux/generic-2.6/files-2.6.25/drivers/net/phy/adm6996.h deleted file mode 100644 index e07490151..000000000 --- a/target/linux/generic-2.6/files-2.6.25/drivers/net/phy/adm6996.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * ADM6996 switch driver - * - * Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License v2 as published by the - * Free Software Foundation - */ -#ifndef __ADM6996_H -#define __ADM6996_H - -#define ADM_PHY_PORTS 5 -#define ADM_CPU_PORT 5 -#define ADM_WAN_PORT 0 /* FIXME: dynamic ? */ - -enum admreg { - ADM_EEPROM_BASE = 0x0, - ADM_P0_CFG = ADM_EEPROM_BASE + 1, - ADM_P1_CFG = ADM_EEPROM_BASE + 3, - ADM_P2_CFG = ADM_EEPROM_BASE + 5, - ADM_P3_CFG = ADM_EEPROM_BASE + 7, - ADM_P4_CFG = ADM_EEPROM_BASE + 8, - ADM_P5_CFG = ADM_EEPROM_BASE + 9, - ADM_EEPROM_EXT_BASE = 0x40, - ADM_COUNTER_BASE = 0xa0, - ADM_SIG0 = ADM_COUNTER_BASE + 0, - ADM_SIG1 = ADM_COUNTER_BASE + 1, - ADM_PHY_BASE = 0x200, -#define ADM_PHY_PORT(n) (ADM_PHY_BASE + (0x20 * n)) -}; - -/* Chip identification patterns */ -#define ADM_SIG0_MASK 0xfff0 -#define ADM_SIG0_VAL 0x1020 -#define ADM_SIG1_MASK 0xffff -#define ADM_SIG1_VAL 0x0007 - -enum { - ADM_PHYCFG_COLTST = (1 << 7), /* Enable collision test */ - ADM_PHYCFG_DPLX = (1 << 8), /* Enable full duplex */ - ADM_PHYCFG_ANEN_RST = (1 << 9), /* Restart auto negotiation (self clear) */ - ADM_PHYCFG_ISO = (1 << 10), /* Isolate PHY */ - ADM_PHYCFG_PDN = (1 << 11), /* Power down PHY */ - ADM_PHYCFG_ANEN = (1 << 12), /* Enable auto negotiation */ - ADM_PHYCFG_SPEED_100 = (1 << 13), /* Enable 100 Mbit/s */ - ADM_PHYCFG_LPBK = (1 << 14), /* Enable loopback operation */ - ADM_PHYCFG_RST = (1 << 15), /* Reset the port (self clear) */ - ADM_PHYCFG_INIT = ( - ADM_PHYCFG_RST | - ADM_PHYCFG_SPEED_100 | - ADM_PHYCFG_ANEN | - ADM_PHYCFG_ANEN_RST - ) -}; - -enum { - ADM_PORTCFG_FC = (1 << 0), /* Enable 802.x flow control */ - ADM_PORTCFG_AN = (1 << 1), /* Enable auto-negotiation */ - ADM_PORTCFG_SPEED_100 = (1 << 2), /* Enable 100 Mbit/s */ - ADM_PORTCFG_DPLX = (1 << 3), /* Enable full duplex */ - ADM_PORTCFG_OT = (1 << 4), /* Output tagged packets */ - ADM_PORTCFG_PD = (1 << 5), /* Port disable */ - ADM_PORTCFG_TV_PRIO = (1 << 6), /* 0 = VLAN based priority - * 1 = TOS based priority */ - ADM_PORTCFG_PPE = (1 << 7), /* Port based priority enable */ - ADM_PORTCFG_PP_S = (1 << 8), /* Port based priority, 2 bits */ - ADM_PORTCFG_PVID_BASE = (1 << 10), /* Primary VLAN id, 4 bits */ - ADM_PORTCFG_FSE = (1 << 14), /* Fx select enable */ - ADM_PORTCFG_CAM = (1 << 15), /* Crossover Auto MDIX */ - - ADM_PORTCFG_INIT = ( - ADM_PORTCFG_FC | - ADM_PORTCFG_AN | - ADM_PORTCFG_SPEED_100 | - ADM_PORTCFG_DPLX | - ADM_PORTCFG_CAM - ), - ADM_PORTCFG_CPU = ( - ADM_PORTCFG_FC | - ADM_PORTCFG_SPEED_100 | - ADM_PORTCFG_OT | - ADM_PORTCFG_DPLX - ), -}; - -#define ADM_PORTCFG_PPID(N) ((n & 0x3) << 8) -#define ADM_PORTCFG_PVID(n) ((n & 0xf) << 10) - -static const u8 adm_portcfg[] = { - [0] = ADM_P0_CFG, - [1] = ADM_P1_CFG, - [2] = ADM_P2_CFG, - [3] = ADM_P3_CFG, - [4] = ADM_P4_CFG, - [5] = ADM_P5_CFG, -}; - -/* - * Split the register address in phy id and register - * it will get combined again by the mdio bus op - */ -#define PHYADDR(_reg) ((_reg >> 5) & 0xff), (_reg & 0x1f) - -#endif diff --git a/target/linux/generic-2.6/files-2.6.25/drivers/net/phy/mvswitch.c b/target/linux/generic-2.6/files-2.6.25/drivers/net/phy/mvswitch.c deleted file mode 100644 index 78e5afe9b..000000000 --- a/target/linux/generic-2.6/files-2.6.25/drivers/net/phy/mvswitch.c +++ /dev/null @@ -1,474 +0,0 @@ -/* - * Marvell 88E6060 switch driver - * Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License v2 as published by the - * Free Software Foundation - */ -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/unistd.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/spinlock.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/mii.h> -#include <linux/ethtool.h> -#include <linux/phy.h> -#include <linux/if_vlan.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include "mvswitch.h" - -/* Undefine this to use trailer mode instead. - * I don't know if header mode works with all chips */ -#define HEADER_MODE 1 - -MODULE_DESCRIPTION("Marvell 88E6060 Switch driver"); -MODULE_AUTHOR("Felix Fietkau"); -MODULE_LICENSE("GPL"); - -struct mvswitch_priv { - /* the driver's tx function */ - int (*hardstart)(struct sk_buff *skb, struct net_device *dev); - struct vlan_group *grp; - u8 vlans[16]; -}; - -#define to_mvsw(_phy) ((struct mvswitch_priv *) (_phy)->priv) - -static inline u16 -r16(struct phy_device *phydev, int addr, int reg) -{ - return phydev->bus->read(phydev->bus, addr, reg); -} - -static inline void -w16(struct phy_device *phydev, int addr, int reg, u16 val) -{ - phydev->bus->write(phydev->bus, addr, reg, val); -} - - -static int -mvswitch_mangle_tx(struct sk_buff *skb, struct net_device *dev) -{ - struct mvswitch_priv *priv; - char *buf = NULL; - u16 vid; - - priv = dev->phy_ptr; - if (unlikely(!priv)) - goto error; - - if (unlikely(skb->len < 16)) - goto error; - -#ifdef HEADER_MODE - if (__vlan_hwaccel_get_tag(skb, &vid)) - goto error; - - if (skb_cloned(skb) || (skb->len <= 62) || (skb_headroom(skb) < MV_HEADER_SIZE)) { - if (pskb_expand_head(skb, MV_HEADER_SIZE, (skb->len < 62 ? 62 - skb->len : 0), GFP_ATOMIC)) - goto error_expand; - if (skb->len < 62) - skb->len = 62; - } - buf = skb_push(skb, MV_HEADER_SIZE); -#else - if (__vlan_get_tag(skb, &vid)) - goto error; - - if (unlikely((vid > 15 || !priv->vlans[vid]))) - goto error; - - if (skb->len <= 64) { - if (pskb_expand_head(skb, 0, 64 + MV_TRAILER_SIZE - skb->len, GFP_ATOMIC)) - goto error_expand; - - buf = skb->data + 64; - skb->len = 64 + MV_TRAILER_SIZE; - } else { - if (skb_cloned(skb) || unlikely(skb_tailroom(skb) < 4)) { - if (pskb_expand_head(skb, 0, 4, GFP_ATOMIC)) - goto error_expand; - } - buf = skb_put(skb, 4); - } - - /* move the ethernet header 4 bytes forward, overwriting the vlan tag */ - memmove(skb->data + 4, skb->data, 12); - skb->data += 4; - skb->len -= 4; - skb->mac_header += 4; -#endif - - if (!buf) - goto error; - - -#ifdef HEADER_MODE - /* prepend the tag */ - *((__be16 *) buf) = cpu_to_be16( - ((vid << MV_HEADER_VLAN_S) & MV_HEADER_VLAN_M) | - ((priv->vlans[vid] << MV_HEADER_PORTS_S) & MV_HEADER_PORTS_M) - ); -#else - /* append the tag */ - *((__be32 *) buf) = cpu_to_be32(( - (MV_TRAILER_OVERRIDE << MV_TRAILER_FLAGS_S) | - ((priv->vlans[vid] & MV_TRAILER_PORTS_M) << MV_TRAILER_PORTS_S) - )); -#endif - - return priv->hardstart(skb, dev); - -error_expand: - if (net_ratelimit()) - printk("%s: failed to expand/update skb for the switch\n", dev->name); - -error: - /* any errors? drop the packet! */ - dev_kfree_skb_any(skb); - return 0; -} - -static int -mvswitch_mangle_rx(struct sk_buff *skb, int napi) -{ - struct mvswitch_priv *priv; - struct net_device *dev; - int vlan = -1; - unsigned char *buf; - int i; - - dev = skb->dev; - if (!dev) - goto error; - - priv = dev->phy_ptr; - if (!priv) - goto error; - - if (!priv->grp) - goto error; - -#ifdef HEADER_MODE - buf = skb->data; - skb_pull(skb, MV_HEADER_SIZE); -#else - buf = skb->data + skb->len - MV_TRAILER_SIZE; - if (buf[0] != 0x80) - goto error; -#endif - - /* look for the vlan matching the incoming port */ - for (i = 0; i < ARRAY_SIZE(priv->vlans); i++) { - if ((1 << buf[1]) & priv->vlans[i]) - vlan = i; - } - - if (vlan == -1) - goto error; - - skb->protocol = eth_type_trans(skb, skb->dev); - - if (napi) - return vlan_hwaccel_receive_skb(skb, priv->grp, vlan); - else - return vlan_hwaccel_rx(skb, priv->grp, vlan); - -error: - /* no vlan? eat the packet! */ - dev_kfree_skb_any(skb); - return 0; -} - - -static int -mvswitch_netif_rx(struct sk_buff *skb) -{ - return mvswitch_mangle_rx(skb, 0); -} - -static int -mvswitch_netif_receive_skb(struct sk_buff *skb) -{ - return mvswitch_mangle_rx(skb, 1); -} - - -static void -mvswitch_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) -{ - struct mvswitch_priv *priv = dev->phy_ptr; - priv->grp = grp; -} - - -static int -mvswitch_wait_mask(struct phy_device *pdev, int addr, int reg, u16 mask, u16 val) -{ - int i = 100; - u16 r; - - do { - r = r16(pdev, addr, reg) & mask; - if (r == val) - return 0; - } while(--i > 0); - return -ETIMEDOUT; -} - -static int -mvswitch_config_init(struct phy_device *pdev) -{ - struct mvswitch_priv *priv = to_mvsw(pdev); - struct net_device *dev = pdev->attached_dev; - u8 vlmap = 0; - int i; - - if (!dev) - return -EINVAL; - - printk("%s: Marvell 88E6060 PHY driver attached.\n", dev->name); - pdev->supported = ADVERTISED_100baseT_Full; - pdev->advertising = ADVERTISED_100baseT_Full; - dev->phy_ptr = priv; - dev->irq = PHY_POLL; - - /* initialize default vlans */ - for (i = 0; i < MV_PORTS; i++) - priv->vlans[(i == MV_WANPORT ? 1 : 0)] |= (1 << i); - - /* before entering reset, disable all ports */ - for (i = 0; i < MV_PORTS; i++) - w16(pdev, MV_PORTREG(CONTROL, i), 0x00); - - msleep(2); /* wait for the status change to settle in */ - - /* put the ATU in reset */ - w16(pdev, MV_SWITCHREG(ATU_CTRL), MV_ATUCTL_RESET); - - i = mvswitch_wait_mask(pdev, MV_SWITCHREG(ATU_CTRL), MV_ATUCTL_RESET, 0); - if (i < 0) { - printk("%s: Timeout waiting for the switch to reset.\n", dev->name); - return i; - } - - /* set the ATU flags */ - w16(pdev, MV_SWITCHREG(ATU_CTRL), - MV_ATUCTL_NO_LEARN | - MV_ATUCTL_ATU_1K | - MV_ATUCTL_AGETIME(MV_ATUCTL_AGETIME_MIN) /* minimum without disabling ageing */ - ); - - /* initialize the cpu port */ - w16(pdev, MV_PORTREG(CONTROL, MV_CPUPORT), -#ifdef HEADER_MODE - MV_PORTCTRL_HEADER | -#else - MV_PORTCTRL_RXTR | - MV_PORTCTRL_TXTR | -#endif - MV_PORTCTRL_ENABLED - ); - /* wait for the phy change to settle in */ - msleep(2); - for (i = 0; i < MV_PORTS; i++) { - u8 pvid = 0; - int j; - - vlmap = 0; - - /* look for the matching vlan */ - for (j = 0; j < ARRAY_SIZE(priv->vlans); j++) { - if (priv->vlans[j] & (1 << i)) { - vlmap = priv->vlans[j]; - pvid = j; - } - } - /* leave port unconfigured if it's not part of a vlan */ - if (!vlmap) - continue; - - /* add the cpu port to the allowed destinations list */ - vlmap |= (1 << MV_CPUPORT); - - /* take port out of its own vlan destination map */ - vlmap &= ~(1 << i); - - /* apply vlan settings */ - w16(pdev, MV_PORTREG(VLANMAP, i), - MV_PORTVLAN_PORTS(vlmap) | - MV_PORTVLAN_ID(i) - ); - - /* re-enable port */ - w16(pdev, MV_PORTREG(CONTROL, i), - MV_PORTCTRL_ENABLED - ); - } - - w16(pdev, MV_PORTREG(VLANMAP, MV_CPUPORT), - MV_PORTVLAN_ID(MV_CPUPORT) - ); - - /* set the port association vector */ - for (i = 0; i <= MV_PORTS; i++) { - w16(pdev, MV_PORTREG(ASSOC, i), - MV_PORTASSOC_PORTS(1 << i) - ); - } - - /* init switch control */ - w16(pdev, MV_SWITCHREG(CTRL), - MV_SWITCHCTL_MSIZE | - MV_SWITCHCTL_DROP - ); - - /* hook into the tx function */ - priv->hardstart = dev->hard_start_xmit; - pdev->netif_receive_skb = mvswitch_netif_receive_skb; - pdev->netif_rx = mvswitch_netif_rx; - dev->hard_start_xmit = mvswitch_mangle_tx; - dev->vlan_rx_register = mvswitch_vlan_rx_register; -#ifdef HEADER_MODE - dev->features |= NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX; -#else - dev->features |= NETIF_F_HW_VLAN_RX; -#endif - - return 0; -} - -static int -mvswitch_read_status(struct phy_device *pdev) -{ - pdev->speed = SPEED_100; - pdev->duplex = DUPLEX_FULL; - pdev->state = PHY_UP; - - /* XXX ugly workaround: we can't force the switch - * to gracefully handle hosts moving from one port to another, - * so we have to regularly clear the ATU database */ - - /* wait for the ATU to become available */ - mvswitch_wait_mask(pdev, MV_SWITCHREG(ATU_OP), MV_ATUOP_INPROGRESS, 0); - - /* flush the ATU */ - w16(pdev, MV_SWITCHREG(ATU_OP), - MV_ATUOP_INPROGRESS | - MV_ATUOP_FLUSH_ALL - ); - - /* wait for operation to complete */ - mvswitch_wait_mask(pdev, MV_SWITCHREG(ATU_OP), MV_ATUOP_INPROGRESS, 0); - - return 0; -} - -static int -mvswitch_config_aneg(struct phy_device *phydev) -{ - return 0; -} - -static void -mvswitch_remove(struct phy_device *pdev) -{ - struct mvswitch_priv *priv = to_mvsw(pdev); - struct net_device *dev = pdev->attached_dev; - - /* restore old xmit handler */ - if (priv->hardstart && dev) - dev->hard_start_xmit = priv->hardstart; - dev->vlan_rx_register = NULL; - dev->vlan_rx_kill_vid = NULL; - dev->phy_ptr = NULL; - dev->features &= ~NETIF_F_HW_VLAN_RX; - kfree(priv); -} - -static bool -mvswitch_detect(struct mii_bus *bus, int addr) -{ - u16 reg; - int i; - - /* we attach to phy id 31 to make sure that the late probe works */ - if (addr != 31) - return false; - - /* look for the switch on the bus */ - reg = bus->read(bus, MV_PORTREG(IDENT, 0)) & MV_IDENT_MASK; - if (reg != MV_IDENT_VALUE) - return false; - - /* - * Now that we've established that the switch actually exists, let's - * get rid of the competition :) - */ - for (i = 0; i < 31; i++) { - if (!bus->phy_map[i]) - continue; - - device_unregister(&bus->phy_map[i]->dev); - kfree(bus->phy_map[i]); - bus->phy_map[i] = NULL; - } - - return true; -} - -static int -mvswitch_probe(struct phy_device *pdev) -{ - struct mvswitch_priv *priv; - - priv = kzalloc(sizeof(struct mvswitch_priv), GFP_KERNEL); - if (priv == NULL) - return -ENOMEM; - - pdev->priv = priv; - - return 0; -} - - -static struct phy_driver mvswitch_driver = { - .name = "Marvell 88E6060", - .features = PHY_BASIC_FEATURES, - .detect = &mvswitch_detect, - .probe = &mvswitch_probe, - .remove = &mvswitch_remove, - .config_init = &mvswitch_config_init, - .config_aneg = &mvswitch_config_aneg, - .read_status = &mvswitch_read_status, - .driver = { .owner = THIS_MODULE,}, -}; - -static int __init -mvswitch_init(void) -{ - return phy_driver_register(&mvswitch_driver); -} - -static void __exit -mvswitch_exit(void) -{ - phy_driver_unregister(&mvswitch_driver); -} - -module_init(mvswitch_init); -module_exit(mvswitch_exit); diff --git a/target/linux/generic-2.6/files-2.6.25/drivers/net/phy/mvswitch.h b/target/linux/generic-2.6/files-2.6.25/drivers/net/phy/mvswitch.h deleted file mode 100644 index 1563eec4d..000000000 --- a/target/linux/generic-2.6/files-2.6.25/drivers/net/phy/mvswitch.h +++ /dev/null @@ -1,145 +0,0 @@ -/* - * Marvell 88E6060 switch driver - * Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License v2 as published by the - * Free Software Foundation - */ -#ifndef __MVSWITCH_H -#define __MVSWITCH_H - -#define MV_HEADER_SIZE 2 -#define MV_HEADER_PORTS_M 0x001f -#define MV_HEADER_PORTS_S 0 -#define MV_HEADER_VLAN_M 0xf000 -#define MV_HEADER_VLAN_S 12 - -#define MV_TRAILER_SIZE 4 -#define MV_TRAILER_PORTS_M 0x1f -#define MV_TRAILER_PORTS_S 16 -#define MV_TRAILER_FLAGS_S 24 -#define MV_TRAILER_OVERRIDE 0x80 - - -#define MV_PORTS 5 -#define MV_WANPORT 4 -#define MV_CPUPORT 5 - -#define MV_BASE 0x10 - -#define MV_PHYPORT_BASE (MV_BASE + 0x0) -#define MV_PHYPORT(_n) (MV_PHYPORT_BASE + (_n)) -#define MV_SWITCHPORT_BASE (MV_BASE + 0x8) -#define MV_SWITCHPORT(_n) (MV_SWITCHPORT_BASE + (_n)) -#define MV_SWITCHREGS (MV_BASE + 0xf) - -enum { - MV_PHY_CONTROL = 0x00, - MV_PHY_STATUS = 0x01, - MV_PHY_IDENT0 = 0x02, - MV_PHY_IDENT1 = 0x03, - MV_PHY_ANEG = 0x04, - MV_PHY_LINK_ABILITY = 0x05, - MV_PHY_ANEG_EXPAND = 0x06, - MV_PHY_XMIT_NEXTP = 0x07, - MV_PHY_LINK_NEXTP = 0x08, - MV_PHY_CONTROL1 = 0x10, - MV_PHY_STATUS1 = 0x11, - MV_PHY_INTR_EN = 0x12, - MV_PHY_INTR_STATUS = 0x13, - MV_PHY_INTR_PORT = 0x14, - MV_PHY_RECV_COUNTER = 0x16, - MV_PHY_LED_PARALLEL = 0x16, - MV_PHY_LED_STREAM = 0x17, - MV_PHY_LED_CTRL = 0x18, - MV_PHY_LED_OVERRIDE = 0x19, - MV_PHY_VCT_CTRL = 0x1a, - MV_PHY_VCT_STATUS = 0x1b, - MV_PHY_CONTROL2 = 0x1e -}; -#define MV_PHYREG(_type, _port) MV_PHYPORT(_port), MV_PHY_##_type - -enum { - MV_PORT_STATUS = 0x00, - MV_PORT_IDENT = 0x03, - MV_PORT_CONTROL = 0x04, - MV_PORT_VLANMAP = 0x06, - MV_PORT_ASSOC = 0x0b, - MV_PORT_RXCOUNT = 0x10, - MV_PORT_TXCOUNT = 0x11, -}; -#define MV_PORTREG(_type, _port) MV_SWITCHPORT(_port), MV_PORT_##_type - -enum { - MV_PORTCTRL_BLOCK = (1 << 0), - MV_PORTCTRL_LEARN = (2 << 0), - MV_PORTCTRL_ENABLED = (3 << 0), - MV_PORTCTRL_VLANTUN = (1 << 7), /* Enforce VLANs on packets */ - MV_PORTCTRL_RXTR = (1 << 8), /* Enable Marvell packet trailer for ingress */ - MV_PORTCTRL_HEADER = (1 << 11), /* Enable Marvell packet header mode for port */ - MV_PORTCTRL_TXTR = (1 << 14), /* Enable Marvell packet trailer for egress */ - MV_PORTCTRL_FORCEFL = (1 << 15), /* force flow control */ -}; - -#define MV_PORTVLAN_ID(_n) (((_n) & 0xf) << 12) -#define MV_PORTVLAN_PORTS(_n) ((_n) & 0x3f) - -#define MV_PORTASSOC_PORTS(_n) ((_n) & 0x1f) -#define MV_PORTASSOC_MONITOR (1 << 15) - -enum { - MV_SWITCH_MAC0 = 0x01, - MV_SWITCH_MAC1 = 0x02, - MV_SWITCH_MAC2 = 0x03, - MV_SWITCH_CTRL = 0x04, - MV_SWITCH_ATU_CTRL = 0x0a, - MV_SWITCH_ATU_OP = 0x0b, - MV_SWITCH_ATU_DATA = 0x0c, - MV_SWITCH_ATU_MAC0 = 0x0d, - MV_SWITCH_ATU_MAC1 = 0x0e, - MV_SWITCH_ATU_MAC2 = 0x0f, -}; -#define MV_SWITCHREG(_type) MV_SWITCHREGS, MV_SWITCH_##_type - -enum { - MV_SWITCHCTL_EEIE = (1 << 0), /* EEPROM interrupt enable */ - MV_SWITCHCTL_PHYIE = (1 << 1), /* PHY interrupt enable */ - MV_SWITCHCTL_ATUDONE= (1 << 2), /* ATU done interrupt enable */ - MV_SWITCHCTL_ATUIE = (1 << 3), /* ATU interrupt enable */ - MV_SWITCHCTL_CTRMODE= (1 << 8), /* statistics for rx and tx errors */ - MV_SWITCHCTL_RELOAD = (1 << 9), /* reload registers from eeprom */ - MV_SWITCHCTL_MSIZE = (1 << 10), /* increase maximum frame size */ - MV_SWITCHCTL_DROP = (1 << 13), /* discard frames with excessive collisions */ -}; - -enum { -#define MV_ATUCTL_AGETIME_MIN 16 -#define MV_ATUCTL_AGETIME_MAX 4080 -#define MV_ATUCTL_AGETIME(_n) ((((_n) / 16) & 0xff) << 4) - MV_ATUCTL_ATU_256 = (0 << 12), - MV_ATUCTL_ATU_512 = (1 << 12), - MV_ATUCTL_ATU_1K = (2 << 12), - MV_ATUCTL_ATUMASK = (3 << 12), - MV_ATUCTL_NO_LEARN = (1 << 14), - MV_ATUCTL_RESET = (1 << 15), -}; - -enum { -#define MV_ATUOP_DBNUM(_n) ((_n) & 0x0f) - - MV_ATUOP_NOOP = (0 << 12), - MV_ATUOP_FLUSH_ALL = (1 << 12), - MV_ATUOP_FLUSH_U = (2 << 12), - MV_ATUOP_LOAD_DB = (3 << 12), - MV_ATUOP_GET_NEXT = (4 << 12), - MV_ATUOP_FLUSH_DB = (5 << 12), - MV_ATUOP_FLUSH_DB_UU= (6 << 12), - - MV_ATUOP_INPROGRESS = (1 << 15), -}; - -#define MV_IDENT_MASK 0xfff0 -#define MV_IDENT_VALUE 0x0600 - -#endif |