diff options
Diffstat (limited to 'target/linux/gemini/patches/002-wbd111_support.patch')
| -rw-r--r-- | target/linux/gemini/patches/002-wbd111_support.patch | 149 |
1 files changed, 149 insertions, 0 deletions
diff --git a/target/linux/gemini/patches/002-wbd111_support.patch b/target/linux/gemini/patches/002-wbd111_support.patch new file mode 100644 index 000000000..3552ad06c --- /dev/null +++ b/target/linux/gemini/patches/002-wbd111_support.patch @@ -0,0 +1,149 @@ +--- /dev/null ++++ b/arch/arm/mach-gemini/board-wbd111.c +@@ -0,0 +1,123 @@ ++/* ++ * Support for Wiliboard WBD-111 ++ * ++ * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/platform_device.h> ++#include <linux/leds.h> ++#include <linux/input.h> ++#include <linux/gpio_keys.h> ++#include <linux/mdio-gpio.h> ++#include <asm/mach-types.h> ++#include <asm/mach/arch.h> ++#include <asm/mach/time.h> ++ ++#include <mach/gmac.h> ++ ++#include "common.h" ++ ++static struct mdio_gpio_platform_data wbd111_mdio = { ++ .mdc = 22, ++ .mdio = 21, ++ .phy_mask = ~(1 << 1), ++}; ++ ++static struct platform_device wbd111_phy_device = { ++ .name = "mdio-gpio", ++ .id = 0, ++ .dev = { ++ .platform_data = &wbd111_mdio, ++ }, ++}; ++ ++static struct gemini_gmac_platform_data gmac_data = { ++ .bus_id[0] = "0:01", ++ .interface[0] = PHY_INTERFACE_MODE_MII, ++}; ++ ++static struct gpio_keys_button wbd111_keys[] = { ++ { ++ .code = KEY_SETUP, ++ .gpio = 5, ++ .active_low = 1, ++ .desc = "reset", ++ .type = EV_KEY, ++ }, ++}; ++ ++static struct gpio_keys_platform_data wbd111_keys_data = { ++ .buttons = wbd111_keys, ++ .nbuttons = ARRAY_SIZE(wbd111_keys), ++}; ++ ++static struct platform_device wbd111_keys_device = { ++ .name = "gpio-keys", ++ .id = -1, ++ .dev = { ++ .platform_data = &wbd111_keys_data, ++ }, ++}; ++ ++static struct gpio_led wbd111_leds[] = { ++ { ++ .name = "L3red", ++ .gpio = 1, ++ }, ++ { ++ .name = "L4green", ++ .gpio = 2, ++ }, ++ { ++ .name = "L4red", ++ .gpio = 3, ++ }, ++ { ++ .name = "L3green", ++ .gpio = 5, ++ }, ++}; ++ ++static struct gpio_led_platform_data wbd111_leds_data = { ++ .num_leds = ARRAY_SIZE(wbd111_leds), ++ .leds = wbd111_leds, ++}; ++ ++static struct platform_device wbd111_leds_device = { ++ .name = "leds-gpio", ++ .id = -1, ++ .dev = { ++ .platform_data = &wbd111_leds_data, ++ }, ++}; ++ ++static struct sys_timer wbd111_timer = { ++ .init = gemini_timer_init, ++}; ++ ++static void __init wbd111_init(void) ++{ ++ gemini_gpio_init(); ++ platform_register_uart(); ++ platform_register_pflash(SZ_8M, NULL, 0); ++ platform_device_register(&wbd111_leds_device); ++ platform_device_register(&wbd111_keys_device); ++ platform_device_register(&wbd111_phy_device); ++ platform_register_ethernet(&gmac_data); ++} ++ ++MACHINE_START(WBD111, "Wiliboard WBD-111") ++ .phys_io = 0x7fffc000, ++ .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc, ++ .boot_params = 0x100, ++ .map_io = gemini_map_io, ++ .init_irq = gemini_init_irq, ++ .timer = &wbd111_timer, ++ .init_machine = wbd111_init, ++MACHINE_END +--- a/arch/arm/mach-gemini/Kconfig ++++ b/arch/arm/mach-gemini/Kconfig +@@ -16,6 +16,13 @@ config MACH_RUT100 + Say Y here if you intend to run this kernel on a + Teltonika 3G Router RUT100. + ++config MACH_WBD111 ++ bool "Wiliboard WBD-111" ++ select GEMINI_MEM_SWAP ++ help ++ Say Y here if you intend to run this kernel on a ++ Wiliboard WBD-111. ++ + endmenu + + config GEMINI_MEM_SWAP +--- a/arch/arm/mach-gemini/Makefile ++++ b/arch/arm/mach-gemini/Makefile +@@ -11,3 +11,4 @@ obj-$(CONFIG_PCI) += pci.o + # Board-specific support + obj-$(CONFIG_MACH_NAS4220B) += board-nas4220b.o + obj-$(CONFIG_MACH_RUT100) += board-rut1xx.o ++obj-$(CONFIG_MACH_WBD111) += board-wbd111.o |