diff options
Diffstat (limited to 'target/linux/etrax/patches-2.6.32')
9 files changed, 0 insertions, 454 deletions
diff --git a/target/linux/etrax/patches-2.6.32/100-cris-makefiles.patch b/target/linux/etrax/patches-2.6.32/100-cris-makefiles.patch deleted file mode 100644 index fbcb7fa05..000000000 --- a/target/linux/etrax/patches-2.6.32/100-cris-makefiles.patch +++ /dev/null @@ -1,53 +0,0 @@ ---- a/arch/cris/boot/compressed/Makefile -+++ b/arch/cris/boot/compressed/Makefile -@@ -18,7 +18,7 @@ ldflags-y += -T $(srctree)/$(src)/decomp - OBJECTS-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o - OBJECTS-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o - OBJECTS= $(OBJECTS-y) $(obj)/misc.o --OBJCOPYFLAGS = -O binary --remove-section=.bss -+#OBJCOPYFLAGS = -O binary --remove-section=.bss - - quiet_cmd_image = BUILD $@ - cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@ ---- a/arch/cris/boot/Makefile -+++ b/arch/cris/boot/Makefile -@@ -5,7 +5,7 @@ - objcopyflags-$(CONFIG_ETRAX_ARCH_V10) += -R .note -R .comment - objcopyflags-$(CONFIG_ETRAX_ARCH_V32) += --remove-section=.bss - --OBJCOPYFLAGS = -O binary $(objcopyflags-y) -+#OBJCOPYFLAGS = -O binary $(objcopyflags-y) - - - subdir- := compressed rescue -@@ -17,7 +17,7 @@ $(obj)/Image: vmlinux FORCE - - $(obj)/compressed/vmlinux: $(obj)/Image FORCE - $(Q)$(MAKE) $(build)=$(obj)/compressed $@ -- $(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin -+# $(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin - - $(obj)/zImage: $(obj)/compressed/vmlinux - @cp $< $@ ---- a/arch/cris/boot/rescue/Makefile -+++ b/arch/cris/boot/rescue/Makefile -@@ -14,7 +14,7 @@ arch-$(CONFIG_ETRAX_ARCH_V10) = v10 - arch-$(CONFIG_ETRAX_ARCH_V32) = v32 - - ldflags-y += -T $(srctree)/$(src)/rescue_$(arch-y).lds --OBJCOPYFLAGS = -O binary --remove-section=.bss -+#OBJCOPYFLAGS = -O binary --remove-section=.bss - obj-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o - obj-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o - OBJECTS := $(obj-y) ---- a/arch/cris/Makefile -+++ b/arch/cris/Makefile -@@ -40,7 +40,7 @@ endif - - LD = $(CROSS_COMPILE)ld -mcrislinux - --OBJCOPYFLAGS := -O binary -R .note -R .comment -S -+OBJCOPYFLAGS := -O binary -R .bss -R .note -R .note.gnu.build-id -R .comment -S - - KBUILD_AFLAGS += -mlinux -march=$(arch-y) $(inc) - KBUILD_CFLAGS += -mlinux -march=$(arch-y) -pipe $(inc) diff --git a/target/linux/etrax/patches-2.6.32/201-flashsize.patch b/target/linux/etrax/patches-2.6.32/201-flashsize.patch deleted file mode 100644 index 42a467f74..000000000 --- a/target/linux/etrax/patches-2.6.32/201-flashsize.patch +++ /dev/null @@ -1,88 +0,0 @@ ---- a/arch/cris/arch-v10/drivers/axisflashmap.c -+++ b/arch/cris/arch-v10/drivers/axisflashmap.c -@@ -113,7 +113,7 @@ static struct map_info map_cse1 = { - - /* If no partition-table was found, we use this default-set. */ - #define MAX_PARTITIONS 7 --#define NUM_DEFAULT_PARTITIONS 3 -+#define NUM_DEFAULT_PARTITIONS 2 - - /* - * Default flash size is 2MB. CONFIG_ETRAX_PTABLE_SECTOR is most likely the -@@ -122,19 +122,14 @@ static struct map_info map_cse1 = { - */ - static struct mtd_partition axis_default_partitions[NUM_DEFAULT_PARTITIONS] = { - { -- .name = "boot firmware", -- .size = CONFIG_ETRAX_PTABLE_SECTOR, -- .offset = 0 -- }, -- { - .name = "kernel", -- .size = 0x200000 - (6 * CONFIG_ETRAX_PTABLE_SECTOR), -- .offset = CONFIG_ETRAX_PTABLE_SECTOR -+ .size = 0x00, -+ .offset = 0 - }, - { -- .name = "filesystem", -- .size = 5 * CONFIG_ETRAX_PTABLE_SECTOR, -- .offset = 0x200000 - (5 * CONFIG_ETRAX_PTABLE_SECTOR) -+ .name = "rootfs", -+ .size = 0x200000, -+ .offset = 0x200000 - } - }; - -@@ -281,6 +276,11 @@ static int __init init_axis_flash(void) - struct partitiontable_entry *ptable; - int use_default_ptable = 1; /* Until proven otherwise. */ - const char pmsg[] = " /dev/flash%d at 0x%08x, size 0x%08x\n"; -+ unsigned int kernel_part_size = 0; -+ unsigned char *flash_mem = (unsigned char*)(FLASH_CACHED_ADDR); -+ unsigned int flash_scan_count = 0; -+ const char *part_magic = "ACME_PART_MAGIC"; -+ unsigned int magic_len = strlen(part_magic); - - if (!(mymtd = flash_probe())) { - /* There's no reason to use this module if no flash chip can -@@ -293,6 +293,31 @@ static int __init init_axis_flash(void) - axisflash_mtd = mymtd; - } - -+ /* scan flash to findout where out partition starts */ -+ -+ printk(KERN_INFO "Scanning flash for end of kernel magic\n"); -+ for(flash_scan_count = 0; flash_scan_count < 100000; flash_scan_count++) { -+ if(strncmp(&flash_mem[flash_scan_count], part_magic, magic_len - 1) == 0) { -+ kernel_part_size = flash_mem[flash_scan_count + magic_len ]; -+ kernel_part_size <<= 8; -+ kernel_part_size += flash_mem[flash_scan_count + magic_len + 2]; -+ kernel_part_size <<= 8; -+ kernel_part_size += flash_mem[flash_scan_count + magic_len + 1]; -+ kernel_part_size <<= 8; -+ kernel_part_size += flash_mem[flash_scan_count + magic_len + 3]; -+ printk(KERN_INFO "Kernel ends at 0x%.08X\n", kernel_part_size); -+ flash_scan_count = 1100000; -+ } -+ } -+ -+ -+ if(kernel_part_size){ -+ kernel_part_size = (kernel_part_size & 0xffff0000); -+ axis_default_partitions[0].size = kernel_part_size; -+ axis_default_partitions[1].size = mymtd->size - axis_default_partitions[0].size; -+ axis_default_partitions[1].offset = axis_default_partitions[0].size; -+ } -+ - if (mymtd) { - mymtd->owner = THIS_MODULE; - ptable_head = (struct partitiontable_head *)(FLASH_CACHED_ADDR + ---- a/arch/cris/arch-v10/lib/hw_settings.S -+++ b/arch/cris/arch-v10/lib/hw_settings.S -@@ -60,3 +60,5 @@ - .dword R_PORT_PB_SET - .dword PB_SET_VALUE - .dword 0 ; No more register values -+ .ascii "ACME_PART_MAGIC" -+ .dword 0xdeadc0de diff --git a/target/linux/etrax/patches-2.6.32/300-usb_support.patch b/target/linux/etrax/patches-2.6.32/300-usb_support.patch deleted file mode 100644 index 681bccc90..000000000 --- a/target/linux/etrax/patches-2.6.32/300-usb_support.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/drivers/usb/host/Makefile -+++ b/drivers/usb/host/Makefile -@@ -28,6 +28,7 @@ obj-$(CONFIG_USB_FHCI_HCD) += fhci.o - obj-$(CONFIG_USB_XHCI_HCD) += xhci.o - obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o - obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o -+obj-$(CONFIG_ETRAX_USB_HOST) += hc-crisv10.o - obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o - obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o - obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o ---- a/drivers/usb/Makefile -+++ b/drivers/usb/Makefile -@@ -21,6 +21,7 @@ obj-$(CONFIG_USB_U132_HCD) += host/ - obj-$(CONFIG_USB_R8A66597_HCD) += host/ - obj-$(CONFIG_USB_HWA_HCD) += host/ - obj-$(CONFIG_USB_ISP1760_HCD) += host/ -+obj-$(CONFIG_ETRAX_USB_HOST) += host/ - - obj-$(CONFIG_USB_C67X00_HCD) += c67x00/ - diff --git a/target/linux/etrax/patches-2.6.32/400-Kconfig_source.patch b/target/linux/etrax/patches-2.6.32/400-Kconfig_source.patch deleted file mode 100644 index 16f87e84d..000000000 --- a/target/linux/etrax/patches-2.6.32/400-Kconfig_source.patch +++ /dev/null @@ -1,86 +0,0 @@ ---- a/arch/cris/Kconfig -+++ b/arch/cris/Kconfig -@@ -649,6 +649,8 @@ endchoice - - endmenu - -+menu "Device Drivers" -+ - source "drivers/base/Kconfig" - - # standard linux drivers -@@ -660,13 +662,19 @@ source "drivers/pnp/Kconfig" - - source "drivers/block/Kconfig" - -+# misc before ide - BLK_DEV_SGIIOC4 depends on SGI_IOC4 -+ -+source "drivers/misc/Kconfig" -+ - source "drivers/ide/Kconfig" - --source "drivers/net/Kconfig" -+source "drivers/scsi/Kconfig" - --source "drivers/i2c/Kconfig" -+source "drivers/ata/Kconfig" - --source "drivers/rtc/Kconfig" -+source "drivers/net/Kconfig" -+ -+source "drivers/isdn/Kconfig" - - # - # input before char - char/joystick depends on it. As does USB. -@@ -675,14 +683,50 @@ source "drivers/input/Kconfig" - - source "drivers/char/Kconfig" - --source "fs/Kconfig" -+source "drivers/i2c/Kconfig" -+ -+#source "drivers/spi/Kconfig" -+ -+source "drivers/gpio/Kconfig" -+ -+source "drivers/w1/Kconfig" -+ -+source "drivers/power/Kconfig" -+ -+source "drivers/hwmon/Kconfig" -+ -+source "drivers/thermal/Kconfig" -+ -+source "drivers/watchdog/Kconfig" -+ -+source "drivers/ssb/Kconfig" -+ -+#source "drivers/l3/Kconfig" -+ -+source "drivers/mfd/Kconfig" -+ -+source "drivers/media/Kconfig" -+ -+source "drivers/video/Kconfig" -+ -+source "sound/Kconfig" -+ -+source "drivers/hid/Kconfig" - - source "drivers/usb/Kconfig" - - source "drivers/uwb/Kconfig" - -+source "drivers/leds/Kconfig" -+ -+source "drivers/rtc/Kconfig" -+ - source "drivers/staging/Kconfig" - -+endmenu -+ -+source "fs/Kconfig" -+ - source "arch/cris/Kconfig.debug" - - source "security/Kconfig" diff --git a/target/linux/etrax/patches-2.6.32/500-i2c_gvc.patch b/target/linux/etrax/patches-2.6.32/500-i2c_gvc.patch deleted file mode 100644 index 16f9b93a0..000000000 --- a/target/linux/etrax/patches-2.6.32/500-i2c_gvc.patch +++ /dev/null @@ -1,54 +0,0 @@ ---- a/arch/cris/arch-v10/drivers/Kconfig -+++ b/arch/cris/arch-v10/drivers/Kconfig -@@ -450,11 +450,31 @@ config ETRAX_I2C - i2c_arg = I2C_READARG(STA013_READ_ADDR, reg); - val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg); - -+config ETRAX_I2C_GVC -+ bool "I2C GVC support" -+ depends on ETRAX_ARCH_V10 && !ETRAX_I2C -+ select ETRAX_I2C_USES_PB_NOT_PB_I2C -+ help -+ Enables an I2C driver with Geert Vancompernolle improvement. -+ -+config ETRAX_I2C_SLAVE_DELAY -+ bool "I2C Slave delay support" -+ depends on ETRAX_I2C_GVC && EXPERIMENTAL -+ help -+ Enable this to enhanced master/slave dialog -+ Improvement by Positive Going (www.positivegoing.it) and BK srl (www.b-k.it) -+ -+config ETRAX_I2C_DYN_ALLOC -+ bool "I2C major device dynamic alloc" -+ depends on ETRAX_I2C_GVC && EXPERIMENTAL -+ help -+ Enable this to dynamicaly alloc major i2c device number -+ - # this is true for most products since PB-I2C seems to be somewhat - # flawed.. - config ETRAX_I2C_USES_PB_NOT_PB_I2C - bool "I2C uses PB not PB-I2C" -- depends on ETRAX_I2C -+ depends on ETRAX_I2C || ETRAX_I2C_GVC - help - Select whether to use the special I2C mode in the PB I/O register or - not. This option needs to be selected in order to use some drivers -@@ -478,7 +498,7 @@ config ETRAX_I2C_CLK_PORT - - config ETRAX_I2C_EEPROM - bool "I2C EEPROM (non-volatile RAM) support" -- depends on ETRAX_I2C -+ depends on ETRAX_I2C || ETRAX_I2C_GVC - help - Enables I2C EEPROM (non-volatile RAM) on PB0 and PB1 using the I2C - driver. Select size option: Probed, 2k, 8k, 16k. ---- a/arch/cris/arch-v10/drivers/Makefile -+++ b/arch/cris/arch-v10/drivers/Makefile -@@ -4,6 +4,7 @@ - - obj-$(CONFIG_ETRAX_AXISFLASHMAP) += axisflashmap.o - obj-$(CONFIG_ETRAX_I2C) += i2c.o -+obj-$(CONFIG_ETRAX_I2C_GVC) += i2c_gvc.o - obj-$(CONFIG_ETRAX_I2C_EEPROM) += eeprom.o - obj-$(CONFIG_ETRAX_GPIO) += gpio.o - obj-$(CONFIG_ETRAX_DS1302) += ds1302.o diff --git a/target/linux/etrax/patches-2.6.32/600-create-device-serial.patch b/target/linux/etrax/patches-2.6.32/600-create-device-serial.patch deleted file mode 100644 index 58817e0de..000000000 --- a/target/linux/etrax/patches-2.6.32/600-create-device-serial.patch +++ /dev/null @@ -1,44 +0,0 @@ ---- a/drivers/serial/crisv10.c -+++ b/drivers/serial/crisv10.c -@@ -32,6 +32,7 @@ static char *serial_version = "$Revision - #include <linux/module.h> - #include <linux/uaccess.h> - #include <linux/io.h> -+#include <linux/device.h> - - #include <asm/irq.h> - #include <asm/dma.h> -@@ -4415,6 +4416,8 @@ static const struct tty_operations rs_op - #endif - }; - -+static struct class *rs_class; -+ - static int __init rs_init(void) - { - int i; -@@ -4548,6 +4551,24 @@ static int __init rs_init(void) - #endif - #endif /* CONFIG_SVINTO_SIM */ - -+ rs_class = class_create(THIS_MODULE, "rs_tty"); -+#ifdef CONFIG_ETRAX_SERIAL_PORT0 -+ device_create(rs_class, NULL, -+ MKDEV(TTY_MAJOR, 64), NULL, "ttyS0"); -+#endif -+#ifdef CONFIG_ETRAX_SERIAL_PORT1 -+ device_create(rs_class, NULL, -+ MKDEV(TTY_MAJOR, 65), NULL, "ttyS1"); -+#endif -+#ifdef CONFIG_ETRAX_SERIAL_PORT2 -+ device_create(rs_class, NULL, -+ MKDEV(TTY_MAJOR, 66), NULL, "ttyS2"); -+#endif -+#ifdef CONFIG_ETRAX_SERIAL_PORT3 -+ device_create(rs_class, NULL, -+ MKDEV(TTY_MAJOR, 67), NULL, "ttyS3"); -+#endif -+ - return 0; - } - diff --git a/target/linux/etrax/patches-2.6.32/610-create-the-gpio-devices.patch b/target/linux/etrax/patches-2.6.32/610-create-the-gpio-devices.patch deleted file mode 100644 index 27e13c2ba..000000000 --- a/target/linux/etrax/patches-2.6.32/610-create-the-gpio-devices.patch +++ /dev/null @@ -1,50 +0,0 @@ ---- a/arch/cris/arch-v10/drivers/gpio.c -+++ b/arch/cris/arch-v10/drivers/gpio.c -@@ -21,6 +21,7 @@ - #include <linux/poll.h> - #include <linux/init.h> - #include <linux/interrupt.h> -+#include <linux/device.h> - - #include <asm/etraxgpio.h> - #include <arch/svinto.h> -@@ -771,6 +772,8 @@ static void ioif_watcher(const unsigned - - /* main driver initialization routine, called from mem.c */ - -+static struct class *gp_class; -+ - static int __init gpio_init(void) - { - int res; -@@ -784,6 +787,8 @@ static int __init gpio_init(void) - return res; - } - -+ gp_class = class_create(THIS_MODULE, "gpio_etrax"); -+ - /* Clear all leds */ - #if defined (CONFIG_ETRAX_CSP0_LEDS) || defined (CONFIG_ETRAX_PA_LEDS) || defined (CONFIG_ETRAX_PB_LEDS) - CRIS_LED_NETWORK_SET(0); -@@ -796,6 +801,8 @@ static int __init gpio_init(void) - CRIS_LED_BIT_SET(i); - #endif - -+ device_create(gp_class, NULL, -+ MKDEV(GPIO_MAJOR, 2), NULL, "leds"); - #endif - /* The I/O interface allocation watcher will be called when - * registering it. */ -@@ -822,6 +829,12 @@ static int __init gpio_init(void) - if (res) - printk(KERN_CRIT "err: PA irq for gpio\n"); - -+ device_create(gp_class, NULL, -+ MKDEV(GPIO_MAJOR, 0), NULL, "gpioa"); -+ device_create(gp_class, NULL, -+ MKDEV(GPIO_MAJOR, 1), NULL, "gpiob"); -+ device_create(gp_class, NULL, -+ MKDEV(GPIO_MAJOR, 3), NULL, "gpiog"); - return res; - } - diff --git a/target/linux/etrax/patches-2.6.32/620-create-the-i2c-devices.patch b/target/linux/etrax/patches-2.6.32/620-create-the-i2c-devices.patch deleted file mode 100644 index 9c2e37ae9..000000000 --- a/target/linux/etrax/patches-2.6.32/620-create-the-i2c-devices.patch +++ /dev/null @@ -1,32 +0,0 @@ ---- a/arch/cris/arch-v10/drivers/i2c.c -+++ b/arch/cris/arch-v10/drivers/i2c.c -@@ -21,6 +21,7 @@ - #include <linux/fs.h> - #include <linux/string.h> - #include <linux/init.h> -+#include <linux/device.h> - - #include <asm/etraxi2c.h> - -@@ -678,6 +679,8 @@ i2c_init(void) - return res; - } - -+static struct class *i2c_class; -+ - static int __init - i2c_register(void) - { -@@ -693,7 +696,11 @@ i2c_register(void) - } - - printk(KERN_INFO "I2C driver v2.2, (c) 1999-2004 Axis Communications AB\n"); -- -+ -+ i2c_class = class_create(THIS_MODULE, "i2c_etrax"); -+ device_create(i2c_class, NULL, -+ MKDEV(I2C_MAJOR, 0), NULL, "i2c"); -+ - return 0; - } - diff --git a/target/linux/etrax/patches-2.6.32/985-cris-headers.patch b/target/linux/etrax/patches-2.6.32/985-cris-headers.patch deleted file mode 100644 index 73ede933b..000000000 --- a/target/linux/etrax/patches-2.6.32/985-cris-headers.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/arch/cris/include/arch-v10/arch/Kbuild -+++ b/arch/cris/include/arch-v10/arch/Kbuild -@@ -1,3 +1,5 @@ -+header-y += elf.h -+header-y += ptrace.h - header-y += user.h - header-y += svinto.h - header-y += sv_addr_ag.h ---- a/arch/cris/include/asm/Kbuild -+++ b/arch/cris/include/asm/Kbuild -@@ -1,11 +1,14 @@ - include include/asm-generic/Kbuild.asm - --header-y += arch-v10/ --header-y += arch-v32/ -+header-y += ../arch-v10/arch/ -+header-y += ../arch-v32/arch/ - -+header-y += elf.h - header-y += ethernet.h -+header-y += page.h - header-y += rtc.h - header-y += sync_serial.h -+header-y += user.h - - unifdef-y += etraxgpio.h - unifdef-y += rs485.h |