summaryrefslogtreecommitdiffstats
path: root/target/linux/etrax/patches-2.6.32/500-i2c_gvc.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/etrax/patches-2.6.32/500-i2c_gvc.patch')
-rw-r--r--target/linux/etrax/patches-2.6.32/500-i2c_gvc.patch54
1 files changed, 0 insertions, 54 deletions
diff --git a/target/linux/etrax/patches-2.6.32/500-i2c_gvc.patch b/target/linux/etrax/patches-2.6.32/500-i2c_gvc.patch
deleted file mode 100644
index 16f9b93a0..000000000
--- a/target/linux/etrax/patches-2.6.32/500-i2c_gvc.patch
+++ /dev/null
@@ -1,54 +0,0 @@
---- a/arch/cris/arch-v10/drivers/Kconfig
-+++ b/arch/cris/arch-v10/drivers/Kconfig
-@@ -450,11 +450,31 @@ config ETRAX_I2C
- i2c_arg = I2C_READARG(STA013_READ_ADDR, reg);
- val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg);
-
-+config ETRAX_I2C_GVC
-+ bool "I2C GVC support"
-+ depends on ETRAX_ARCH_V10 && !ETRAX_I2C
-+ select ETRAX_I2C_USES_PB_NOT_PB_I2C
-+ help
-+ Enables an I2C driver with Geert Vancompernolle improvement.
-+
-+config ETRAX_I2C_SLAVE_DELAY
-+ bool "I2C Slave delay support"
-+ depends on ETRAX_I2C_GVC && EXPERIMENTAL
-+ help
-+ Enable this to enhanced master/slave dialog
-+ Improvement by Positive Going (www.positivegoing.it) and BK srl (www.b-k.it)
-+
-+config ETRAX_I2C_DYN_ALLOC
-+ bool "I2C major device dynamic alloc"
-+ depends on ETRAX_I2C_GVC && EXPERIMENTAL
-+ help
-+ Enable this to dynamicaly alloc major i2c device number
-+
- # this is true for most products since PB-I2C seems to be somewhat
- # flawed..
- config ETRAX_I2C_USES_PB_NOT_PB_I2C
- bool "I2C uses PB not PB-I2C"
-- depends on ETRAX_I2C
-+ depends on ETRAX_I2C || ETRAX_I2C_GVC
- help
- Select whether to use the special I2C mode in the PB I/O register or
- not. This option needs to be selected in order to use some drivers
-@@ -478,7 +498,7 @@ config ETRAX_I2C_CLK_PORT
-
- config ETRAX_I2C_EEPROM
- bool "I2C EEPROM (non-volatile RAM) support"
-- depends on ETRAX_I2C
-+ depends on ETRAX_I2C || ETRAX_I2C_GVC
- help
- Enables I2C EEPROM (non-volatile RAM) on PB0 and PB1 using the I2C
- driver. Select size option: Probed, 2k, 8k, 16k.
---- a/arch/cris/arch-v10/drivers/Makefile
-+++ b/arch/cris/arch-v10/drivers/Makefile
-@@ -4,6 +4,7 @@
-
- obj-$(CONFIG_ETRAX_AXISFLASHMAP) += axisflashmap.o
- obj-$(CONFIG_ETRAX_I2C) += i2c.o
-+obj-$(CONFIG_ETRAX_I2C_GVC) += i2c_gvc.o
- obj-$(CONFIG_ETRAX_I2C_EEPROM) += eeprom.o
- obj-$(CONFIG_ETRAX_GPIO) += gpio.o
- obj-$(CONFIG_ETRAX_DS1302) += ds1302.o