summaryrefslogtreecommitdiffstats
path: root/target/linux/brcm63xx/image
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm63xx/image')
-rw-r--r--target/linux/brcm63xx/image/Makefile98
-rw-r--r--target/linux/brcm63xx/image/README.images-bcm63xx91
2 files changed, 87 insertions, 102 deletions
diff --git a/target/linux/brcm63xx/image/Makefile b/target/linux/brcm63xx/image/Makefile
index 5d17c2baf..f7d1473ad 100644
--- a/target/linux/brcm63xx/image/Makefile
+++ b/target/linux/brcm63xx/image/Makefile
@@ -30,9 +30,9 @@ endef
define Image/Build/CFE
# Generate the tagged image
$(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
- -o $(BIN_DIR)/openwrt-$(2)-$(1)-$(6)-cfe.bin \
+ -o $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin \
-b $(2) -c $(3) -e $(LOADADDR) -l $(LOADADDR) \
- -t $(4) -d "$(5)" $(7)
+ -r "$(5)" $(6)
# -b $(2) -c $(3) -e $(KERNEL_ENTRY) -l $(LOADADDR)
endef
@@ -40,17 +40,17 @@ endef
define Image/Build/CFEAGPF
# Generate the tagged image
$(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
- -o $(BIN_DIR)/openwrt-$(2)-$(1)-$(7)-cfe.bin \
+ -o $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
-b $(2) -c $(3) -e $(LOADADDR) -l $(LOADADDR) \
- -v 8 -m IMAGE -k 0x20000 -n $(4) -t $(5)
+ -v 8 -m IMAGE -k 0x20000 -n $(4)
endef
define Image/Build/RG100A
# Generate the tagged image
$(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
- -o $(BIN_DIR)/openwrt-$(6)-$(1)-$(7)-cfe.bin \
+ -o $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
-b $(2) -c $(3) -e $(LOADADDR) -l $(LOADADDR) \
- -k 0x20000 -n $(4) -t $(5)
+ -k 0x20000 -n $(4)
endef
@@ -105,84 +105,70 @@ endef
define Image/Build
dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-root.$(1) bs=128k conv=sync
# Various routers
- $(call Image/Build/CFE,$(1),96345GW2,6345,bccfe,,bccfe,)
- $(call Image/Build/CFE,$(1),96345GW2,6345,bc221,,bc221,-y 5)
- $(call Image/Build/CFE,$(1),96345GW2,6345,bc300,,bc300,)
- $(call Image/Build/CFE,$(1),96345GW2,6345,bc310,OpenWRT-$(REVISION),bc310,)
- $(call Image/Build/CFE,$(1),96348GW,6348,bccfe,,bccfe,)
- $(call Image/Build/CFE,$(1),96348GW,6348,bc221,,bc221,-y 5)
+ $(call Image/Build/CFE,$(1),96345GW2,6345,96345GW2-generic)
+ $(call Image/Build/CFE,$(1),96345GW2,6345,96348GW2-bc221,,-y 5)
+ $(call Image/Build/CFE,$(1),96345GW2,6345,92345GW2-revision,OpenWRT-$(REVISION))
+ $(call Image/Build/CFE,$(1),96348GW,6348,96348GW-generic,,)
+ $(call Image/Build/CFE,$(1),96348GW,6348,96348GW-bc221,,-y 5)
+ $(call Image/Build/CFE,$(1),6338GW,6338,6338GW-generic,,)
+ $(call Image/Build/CFE,$(1),6338W,6338,6338W-generic,,)
+
# BT Voyager V210_BTR
- $(call Image/Build/CFE,$(1),V210_BB,6348,bc221,,btvgr,-y 5)
+ $(call Image/Build/CFE,$(1),V210_BB,6348,BTV210_BTR,,-y 5)
# BT Voyager V210_ROI, V210_WB
- $(call Image/Build/CFE,$(1),V210,6348,bc221,,btvgr,-y 5)
+ $(call Image/Build/CFE,$(1),V210,6348,BTV210_ROI_WB,,-y 5)
# BT Voyager V2091_BTR
- $(call Image/Build/CFE,$(1),V2091_BB,6348,bc221,,btvgr,-y 5)
+ $(call Image/Build/CFE,$(1),V2091_BB,6348,BTV2091_BTR,,y 5)
# BT Voyager V2091_ROI, V2091_WB
- $(call Image/Build/CFE,$(1),V2091,6348,bc221,,btvgr,-y 5)
+ $(call Image/Build/CFE,$(1),V2091,6348,BTV2091_ROI_WB,,-y 5)
# BT Voyager V220V, V220V_MGCP_BTR
- $(call Image/Build/CFE,$(1),RTA1052V,6348,bc221,,btvgr,-y 5)
+ $(call Image/Build/CFE,$(1),RTA1052V,6348,BTV220V_MGCP_BTR,,-y 5)
# BT Voyager V2110, V2110_AA, V2110_ROI
- $(call Image/Build/CFE,$(1),V2110,6348,bc221,,btvgr,-y 5)
+ $(call Image/Build/CFE,$(1),V2110,6348,BTV2110,,-y 5)
# BT Voyager V2500V, V2500V_SIP_CLUB, V2500V_AA
- $(call Image/Build/CFE,$(1),V2500V_BB,6348,bc221,,btvgr,-y 5)
+ $(call Image/Build/CFE,$(1),V2500V_BB,6348,BTV2500V,,-y 5)
# RTA1025W_16 (numerous routers)
- $(call Image/Build/CFE,$(1),RTA1025W_16,6348,bc221,,btrta,-y 5)
+ $(call Image/Build/CFE,$(1),RTA1025W_16,6348,RTA1025W_16,,-y 5)
# Tecom GW6000
- $(call Image/Build/CFE,$(1),96348GW,6348,bc300,,bc300,)
+ $(call Image/Build/CFE,$(1),96348GW,6348,GW6000)
# Tecom GW6200
- $(call Image/Build/CFE,$(1),96348GW,6348,bc310,$(shell printf '\x99'),gw6200)
+ $(call Image/Build/CFE,$(1),96348GW,6348,GW6200,$(shell printf '\x99'))
# Neufbox4
- $(call Image/Build/CFE,$(1),96358VW,6358,bccfe,,bccfe)
- $(call Image/Build/CFE,$(1),96358VW,6358,bc310,OpenWRT-$(REVISION),nb4)
+ $(call Image/Build/CFE,$(1),96358VW,6358,NEUFBOX4,OpenWRT-$(REVISION))
# Comtrend 536, 5621
- $(call Image/Build/CFE,$(1),96348GW-11,6348,bccfe,,bccfe)
- $(call Image/Build/CFE,$(1),96348GW-11,6348,bc300,,bc300)
- # TP-Link 8900GB
- $(call Image/Build/CFE,$(1),96348GW-11,6348,bc310,$(shell printf 'PRID\x89\x10\x00\x02'),td8900GB)
+ $(call Image/Build/CFE,$(1),96348GW-11,6348,CT536_CT5621)
# Davolink DV201AMR
$(call Image/Build/CFEOLD,$(1),DV201AMR,6348)
# USR 9108
- $(call Image/Build/CFE,$(1),96348GW-A,6348,bccfe,,bccfe)
- $(call Image/Build/CFE,$(1),96348GW-A,6348,bc300,,bc300)
+ $(call Image/Build/CFE,$(1),96348GW-A,6348,USR9108)
# NetGear DG834GT, DG834PN
- $(call Image/Build/CFE,$(1),96348GW-10,6348,bccfe,,bccfe)
- $(call Image/Build/CFE,$(1),96348GW-10,6348,bc300,,bc300)
+ $(call Image/Build/CFE,$(1),96348GW-10,6348,DG834GT_DG834PN)
# Belkin f5d7633
- $(call Image/Build/CFE,$(1),96348GW-10,6348,bc310,,bc310)
+ $(call Image/Build/CFE,$(1),96348GW-10,6348,F5D7633)
# D-Link DSL-2640B
- $(call Image/Build/CFE,$(1),D-4P-W,6348,bc310,,bc310)
+ $(call Image/Build/CFE,$(1),D-4P-W,6348,DSL2640B)
+ # D-Link DSL-2740B
+ $(call Image/Build/CFE,$(1),96358GW,6358,DSL2740B)
# TP-Link TD-8810A, TD-8810B, TD-8811A, TD-8811B
- $(call Image/Build/CFE,$(1),8L-2M-8M,6338,bccfe,,bccfe)
- $(call Image/Build/CFE,$(1),8L-2M-8M,6338,bc300,,bc300)
-
- # Generic 6338 images
- $(call Image/Build/CFE,$(1),6338GW,6338,bccfe,,bccfe)
- $(call Image/Build/CFE,$(1),6338GW,6338,bc221,,bc221)
- $(call Image/Build/CFE,$(1),6338GW,6338,bc300,,bc300)
- $(call Image/Build/CFE,$(1),6338GW,6338,bc310,,bc310)
- $(call Image/Build/CFE,$(1),6338W,6338,bccfe,,bccfe)
- $(call Image/Build/CFE,$(1),6338W,6338,bc221,,bc221)
- $(call Image/Build/CFE,$(1),6338W,6338,bc300,,bc300)
- $(call Image/Build/CFE,$(1),6338W,6338,bc310,,bc310)
+ $(call Image/Build/CFE,$(1),8L-2M-8M,6338,TP8810_8811)
+ # TP-Link 8900GB
+ $(call Image/Build/CFE,$(1),96348GW-11,6348,TD8900GB,$(shell printf 'PRID\x89\x10\x00\x02'))
# Sagem F@ST2404
- $(call Image/Build/CFE,$(1),F@ST2404,6348,bccfe,,bccfe)
- $(call Image/Build/CFE,$(1),F@ST2404,6348,bc300,,bc300)
- $(call Image/Build/CFE,$(1),F@ST2404,6348,bc310,OpenWRT-$(REVISION),bc310)
+ $(call Image/Build/CFE,$(1),F@ST2404,6348,F@ST2404-cfe)
+ $(call Image/Build/CFE,$(1),F@ST2404,6348,F@ST2404,OpenWRT-$(REVISION))
# Inventel Livebox
$(call Image/Build/RedBoot,livebox)
- # D-Link DSL-2740B
- $(call Image/Build/CFE,$(1),96358GW,6358,bc310,,dsl2740b)
# Pirelli Alice Gate VoIP 2 Plus Wi-Fi AGPF-S0
- $(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,bccfe,,bccfe)
- $(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,ag306,,agv2+w)
+ $(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,AGV2+W-cfe)
+ $(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,AGV2+W)
# Pirelli A226G
- $(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x10000,bccfe,,bccfe)
- $(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x10000,ag306,DWV_96358,a226g)
+ $(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x10000,A226G-cfe)
+ $(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x10000,A226G)
# RG100A,DB120 etc.
- $(call Image/Build/RG100A,$(1),96358VW2,6358,0x20000,bc310,rg100a,bc310)
+ $(call Image/Build/RG100A,$(1),96358VW2,6358,0x20000,RG100A_DB120)
endef
diff --git a/target/linux/brcm63xx/image/README.images-bcm63xx b/target/linux/brcm63xx/image/README.images-bcm63xx
index 9cf05743a..91b6d019e 100644
--- a/target/linux/brcm63xx/image/README.images-bcm63xx
+++ b/target/linux/brcm63xx/image/README.images-bcm63xx
@@ -16,6 +16,11 @@ Images flashable using cfe are labelled openwrt-<board>-<filesystem>-cfe.bin
The imagetags for tftp/ftp flashing is based on Broadcom 3.00-3.04 imagetags
and is known to be correct as the source code GPL and is available for reading.
+Broadcom code 2.21 is based on the BT Voyager firmware image I looked at. It
+may in fact be BT Voyager-specific. 2.21 is actually more difficult to deal
+with the imagetag from 3.00 as it has three different CRC calculations in
+addtition to the header CRC.
+
Broadcom 3.00-3.02 flashing has been tested on Comtrend CT-5261, CT-536 and
Tecom GW6000, and is the version of the flashing that was present before the
imagetags were split by broadcom code version (early June 2009)
@@ -27,16 +32,11 @@ this author (Daniel Dickinson) has seen is the Alice Gate (Pirelli) firmware
which is known to be different due to vendor (Pirelli) modifications to the
Broadcom code.
-Broadcom 3.08 introduced changes to the imagetag to deal with TR69 (a remote
-router management system developed by the DSL Forum). The version we are
-using as 3.08 is based on the BT Voyager firmware image I looked at. It may
-in fact be BT Voyager-specific, and may in fact not be 3.08, but modified 3.06
-and not apply to all 3.08 versions.
-
Broadcom 3.10 uses an imagetag that is believed to apply to all 3.10 and 3.12
-versions, and has been tested on the Tecom GW6200. It is similar to 3.08.
-There is a field for vendor-specific information, that at least in some cases
-is not optional. It is based on the hexedit of a neufbox4 firmware image, the
+versions, and has been tested on the Tecom GW6200. This version introdec changes to
+the imagetag to deal with TR69 (a remote rouer management system developed by the
+DSL forum). There is a field for vendor-specific information, that at least in some
+cases is not optional. It is based on the hexedit of a neufbox4 firmware image, the
information in https://dev.openwrt.org/ticket/4987, and the hexedit of a Tecom
GW6200 image.
@@ -44,43 +44,41 @@ Some boards share the same tag format, but require vendor-specific fields in
the board. In that case the tagid is shared, but the filename of the generated
image reflects the router for which the image was created.
-router |method| codever |tagid |filename
-+-------------+------+---------+------+----------------------------------------
-|any |cfe | any |bccfe |openwrt-<board>-<fs>-bccfe-cfe.bin
-|any |t/ftp | any |bc300 |openwrt-<board>-<fs>-bc300-cfe.bin
-| |web |3.00-3.06|bc300 |openwrt-<board>-<fs>-bc300-cfe.bin
-| |web |3.10-3.12|bc310 |openwrt-<board>-<fs>-bc310-cfe.bin
-|AGVoIP2+WiFi |web |alice3.06|ag306 |openwrt-AGPF-S0-<fs>-agv2+w-cfe.bin
-|CT536 |web |3.02 |bc300 |openwrt-96348GW-11-<fs>-bc300-cfe.bin
-|CT5621 |web |3.02 |bc300 |openwrt-96348GW-11-<fs>-bc300-cfe.bin
-|DG834GT |web |3.02 |bc300 |openwrt-96348GW-10-<fs>-bc300-cfe.bin
-|DG834PN |web |3.02 |bc300 |openwrt-96348GW-10-<fs>-bc300-cfe.bin
-|DSL-2640B |web |3.10 |bc310 |openwrt-D-4P-W-<fs>-bc310-cfe.bin
-|DSL-2740B |web |3.10 |bc310 |openwrt-96358GW-<fs>-dsl2740b-cfe.bin
-|F5D7633 |web |3.10 |bc310 |openwrt-96348GW-10-<fs>-bc310-cfe.bin
-|F@ST2404 |web |? |bc300 |openwrt-F@ST2404-<fs>-bc300-cfe.bin
-|F@ST2404 |web |? |bc310 |openwrt-F@ST2404-<fs>-bc310-cfe.bin
-|GW6000 |web |3.00 |bc300 |openwrt-96348GW-<fs>-bc300-cfe.bin
-|GW6200 |web |3.10 |bc310 |openwrt-96348GW-<fs>-gw6200-cfe.bin
-|Neufbox4 |web |3.12 |bc310 |openwrt-96358VW-<fs>-nb4-cfe.bin
-|TD8810A |web |3.06 |bc300 |openwrt-8L-2M-8M-<fs>-bc306-cfe.bin
-|TD8810B |web |3.06 |bc300 |openwrt-8L-2M-8M-<fs>-bc306-cfe.bin
-|TD8811A |web |3.06 |bc300 |openwrt-8L-2M-8M-<fs>-bc306-cfe.bin
-|TD8811B |web |3.06 |bc300 |openwrt-8L-2M-8M-<fs>-bc306-cfe.bin
-|TD8900GB |web |3.06 |bc300 |openwrt-96348GW-11-<fs>-td8900gb-cfe.bin
-|USR9108 |web |? |bc300 |openwrt-96348GW-A-<fs>-bc300-cfe.bin
-|V2091_BTR |web |2.21 |bc221 |openwrt-V2091_BB-<fs>-btvgr-cfe.bin
-|V2091_ROI |web |2.21 |bc221 |openwrt-V2091-<fs>-btvgr-cfe.bin
-|V2091_WB |web |2.21 |bc221 |openwrt-V2091-<fs>-btvgr-cfe.bin
-|V210_BTR |web |2.21 |bc221 |openwrt-V210_BB-<fs>-btvgr-cfe.bin
-|V210_ROI |web |2.21 |bc221 |openwrt-V210-<fs>-btvgr-cfe.bin
-|V210_WB |web |2.21 |bc221 |openwrt-V210-<fs>-btvgr-cfe.bin
-|V2110 |web |2.21 |bc221 |openwrt-V2110-<fs>-btvgr-cfe.bin
-|V2110_AA |web |2.21 |bc221 |openwrt-V2110-<fs>-btvgr-cfe.bin
-|V2110_ROI |web |2.21 |bc221 |openwrt-V2110-<fs>-btvgr-cfe.bin
-|V2500V |web |2.21 |bc221 |openwrt-V2500V_BB-<fs>-btvgr-cfe.bin
-|V2500V_AA |web |2.21 |bc221 |openwrt-V2500V_BB-<fs>-btvgr-cfe.bin
-|V2500V_SIP_CLUB |web|2.21 |bc221 |openwrt-V2500V_BB-<fs>-btvgr-cfe.bin
+router |method | codever |filename
++-------------+-------------+---------+---------------------------------------
+|any |cfe+most web | any |openwrt-<board>-<fs>-cfe.bin
+|AGVoIP2+WiFi |cfe |alice3.06|openwrt-AGV2+W-cfe-<fs>-cfe.bin
+|AGVoIP2+WiFi |web |alice3.06|openwrt-AGV2+W-cfe-<fs>-cfe.bin
+|CT536 |web |3.02 |openwrt-CT536_CT5621-<fs>-cfe.bin
+|CT5621 |web |3.02 |openwrt-CT536_CT5621-<fs>-cfe.bin
+|DG834GT |web |3.02 |openwrt-DG834GT_DG834PN-<fs>-cfe.bin
+|DG834PN |web |3.02 |openwrt-DG834GT_DG834PN-<fs>-cfe.bin
+|DSL-2640B |web |3.10 |openwrt-DSL2640B-<fs>-cfe.bin
+|DSL-2740B |web |3.10 |openwrt-DSL2670B-<fs>-cfe.bin
+|F5D7633 |web |3.10 |openwrt-F5D7633-<fs>-cfe.bin
+|F@ST2404 |web |3.0X? |openwrt-F@ST2404-cfe-<fs>-cfe.bin
+|F@ST2404 |web |3.1X? |openwrt-F@ST2404-<fs>-cfe.bin
+|GW6000 |web |3.00 |openwrt-GW6000-<fs>-cfe.bin
+|GW6200 |web |3.10 |openwrt-GW6200-<fs>-cfe.bin
+|Neufbox4 |web |3.12 |openwrt-NEUFBOX4-<fs>-cfe.bin
+|TD8810A |web |3.06 |openwrt-TD8810-<fs>-cfe.bin
+|TD8810B |web |3.06 |openwrt-TD8810-<fs>-cfe.bin
+|TD8811A |web |3.06 |openwrt-TD8811-<fs>-cfe.bin
+|TD8811B |web |3.06 |openwrt-TD881-<fs>-cfe.bin
+|TD8900GB |web |3.06 |openwrt-TD8900DB<fs>-cfe.bin
+|USR9108 |web |3.0X? |openwrt-USR9108-<fs>-cfe.bin
+|V2091_BTR |web |2.21 |openwrt-V2091_BTR-<fs>-cfe.bin
+|V2091_ROI |web |2.21 |openwrt-V2091-<fs>-cfe.bin
+|V2091_WB |web |2.21 |openwrt-V2091-<fs>-cfe.bin
+|V210_BTR |web |2.21 |openwrt-V210_BTR-<fs>-cfe.bin
+|V210_ROI |web |2.21 |openwrt-V210-ROI_WB<fs>-cfe.bin
+|V210_WB |web |2.21 |openwrt-V210-ROI_WB<fs>-cfe.bin
+|V2110 |web |2.21 |openwrt-V2110-<fs>-cfe.bin
+|V2110_AA |web |2.21 |openwrt-V2110-<fs>-cfe.bin
+|V2110_ROI |web |2.21 |openwrt-V2110-<fs>-cfe.bin
+|V2500V |web |2.21 |openwrt-V2500V<fs>-cfe.bin
+|V2500V_AA |web |2.21 |openwrt-V2500V-<fs>-cfe.bin
+|V2500V_SIP_CLUB |web |2.21 |openwrt-V2500V-<fs>-cfe.bin
Old imagetag routers
--------------------
@@ -126,3 +124,4 @@ TP-Link |TD-W8900GB |3.06
Tecom |GW6000 |3.00
Tecom |GW6200 |3.10
USR |9108 |?
+