diff options
Diffstat (limited to 'target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.h')
| -rw-r--r-- | target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.h | 758 |
1 files changed, 758 insertions, 0 deletions
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.h new file mode 100644 index 000000000..08ba24cca --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.h @@ -0,0 +1,758 @@ +/* +<:copyright-gpl + + Copyright 2003 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + +:> +*/ +/************************************************************************** + * File Name : boardparms.h + * + * Description: This file contains definitions and function prototypes for + * the BCM63xx board parameter access functions. + * + * Updates : 07/14/2003 Created. + ***************************************************************************/ + +#if !defined(_BOARDPARMS_H) +#define _BOARDPARMS_H + +/* Return codes. */ +#define BP_SUCCESS 0 +#define BP_BOARD_ID_NOT_FOUND 1 +#define BP_VALUE_NOT_DEFINED 2 +#define BP_BOARD_ID_NOT_SET 3 + +/* Values for BpGetSdramSize. */ +#define BP_MEMORY_8MB_1_CHIP 0 +#define BP_MEMORY_16MB_1_CHIP 1 +#define BP_MEMORY_32MB_1_CHIP 2 +#define BP_MEMORY_64MB_2_CHIP 3 +#define BP_MEMORY_32MB_2_CHIP 4 +#define BP_MEMORY_16MB_2_CHIP 5 + +/* Values for EthernetMacInfo PhyType. */ +#define BP_ENET_NO_PHY 0 +#define BP_ENET_INTERNAL_PHY 1 +#define BP_ENET_EXTERNAL_PHY 2 +#define BP_ENET_EXTERNAL_SWITCH 3 + +/* Values for EthernetMacInfo Configuration type. */ +#define BP_ENET_CONFIG_MDIO 0 /* Internal PHY, External PHY, Switch+(no GPIO, no SPI, no MDIO Pseudo phy */ +#define BP_ENET_CONFIG_GPIO 1 /* Bcm96345GW board + Bcm5325M/E */ +#define BP_ENET_CONFIG_MDIO_PSEUDO_PHY 2 /* Bcm96348GW board + Bcm5325E */ +#define BP_ENET_CONFIG_SPI_SSB_0 3 /* Bcm96348GW board + Bcm5325M/E */ +#define BP_ENET_CONFIG_SPI_SSB_1 4 /* Bcm96348GW board + Bcm5325M/E */ +#define BP_ENET_CONFIG_SPI_SSB_2 5 /* Bcm96348GW board + Bcm5325M/E */ +#define BP_ENET_CONFIG_SPI_SSB_3 6 /* Bcm96348GW board + Bcm5325M/E */ + +/* Values for EthernetMacInfo Reverse MII. */ +#define BP_ENET_NO_REVERSE_MII 0 +#define BP_ENET_REVERSE_MII 1 + +/* Values for VoIPDSPInfo DSPType. */ +#define BP_VOIP_NO_DSP 0 +#define BP_VOIP_DSP 1 + + +/* Values for GPIO pin assignments (AH = Active High, AL = Active Low). */ +#define BP_ACTIVE_MASK 0x8000 +#define BP_ACTIVE_HIGH 0x0000 +#define BP_ACTIVE_LOW 0x8000 +#define BP_GPIO_0_AH (0 | BP_ACTIVE_HIGH) +#define BP_GPIO_0_AL (0 | BP_ACTIVE_LOW) +#define BP_GPIO_1_AH (1 | BP_ACTIVE_HIGH) +#define BP_GPIO_1_AL (1 | BP_ACTIVE_LOW) +#define BP_GPIO_2_AH (2 | BP_ACTIVE_HIGH) +#define BP_GPIO_2_AL (2 | BP_ACTIVE_LOW) +#define BP_GPIO_3_AH (3 | BP_ACTIVE_HIGH) +#define BP_GPIO_3_AL (3 | BP_ACTIVE_LOW) +#define BP_GPIO_4_AH (4 | BP_ACTIVE_HIGH) +#define BP_GPIO_4_AL (4 | BP_ACTIVE_LOW) +#define BP_GPIO_5_AH (5 | BP_ACTIVE_HIGH) +#define BP_GPIO_5_AL (5 | BP_ACTIVE_LOW) +#define BP_GPIO_6_AH (6 | BP_ACTIVE_HIGH) +#define BP_GPIO_6_AL (6 | BP_ACTIVE_LOW) +#define BP_GPIO_7_AH (7 | BP_ACTIVE_HIGH) +#define BP_GPIO_7_AL (7 | BP_ACTIVE_LOW) +#define BP_GPIO_8_AH (8 | BP_ACTIVE_HIGH) +#define BP_GPIO_8_AL (8 | BP_ACTIVE_LOW) +#define BP_GPIO_9_AH (9 | BP_ACTIVE_HIGH) +#define BP_GPIO_9_AL (9 | BP_ACTIVE_LOW) +#define BP_GPIO_10_AH (10 | BP_ACTIVE_HIGH) +#define BP_GPIO_10_AL (10 | BP_ACTIVE_LOW) +#define BP_GPIO_11_AH (11 | BP_ACTIVE_HIGH) +#define BP_GPIO_11_AL (11 | BP_ACTIVE_LOW) +#define BP_GPIO_12_AH (12 | BP_ACTIVE_HIGH) +#define BP_GPIO_12_AL (12 | BP_ACTIVE_LOW) +#define BP_GPIO_13_AH (13 | BP_ACTIVE_HIGH) +#define BP_GPIO_13_AL (13 | BP_ACTIVE_LOW) +#define BP_GPIO_14_AH (14 | BP_ACTIVE_HIGH) +#define BP_GPIO_14_AL (14 | BP_ACTIVE_LOW) +#define BP_GPIO_15_AH (15 | BP_ACTIVE_HIGH) +#define BP_GPIO_15_AL (15 | BP_ACTIVE_LOW) +#define BP_GPIO_16_AH (16 | BP_ACTIVE_HIGH) +#define BP_GPIO_16_AL (16 | BP_ACTIVE_LOW) +#define BP_GPIO_17_AH (17 | BP_ACTIVE_HIGH) +#define BP_GPIO_17_AL (17 | BP_ACTIVE_LOW) +#define BP_GPIO_18_AH (18 | BP_ACTIVE_HIGH) +#define BP_GPIO_18_AL (18 | BP_ACTIVE_LOW) +#define BP_GPIO_19_AH (19 | BP_ACTIVE_HIGH) +#define BP_GPIO_19_AL (19 | BP_ACTIVE_LOW) +#define BP_GPIO_20_AH (20 | BP_ACTIVE_HIGH) +#define BP_GPIO_20_AL (20 | BP_ACTIVE_LOW) +#define BP_GPIO_21_AH (21 | BP_ACTIVE_HIGH) +#define BP_GPIO_21_AL (21 | BP_ACTIVE_LOW) +#define BP_GPIO_22_AH (22 | BP_ACTIVE_HIGH) +#define BP_GPIO_22_AL (22 | BP_ACTIVE_LOW) +#define BP_GPIO_23_AH (23 | BP_ACTIVE_HIGH) +#define BP_GPIO_23_AL (23 | BP_ACTIVE_LOW) +#define BP_GPIO_24_AH (24 | BP_ACTIVE_HIGH) +#define BP_GPIO_24_AL (24 | BP_ACTIVE_LOW) +#define BP_GPIO_25_AH (25 | BP_ACTIVE_HIGH) +#define BP_GPIO_25_AL (25 | BP_ACTIVE_LOW) +#define BP_GPIO_26_AH (26 | BP_ACTIVE_HIGH) +#define BP_GPIO_26_AL (26 | BP_ACTIVE_LOW) +#define BP_GPIO_27_AH (27 | BP_ACTIVE_HIGH) +#define BP_GPIO_27_AL (27 | BP_ACTIVE_LOW) +#define BP_GPIO_28_AH (28 | BP_ACTIVE_HIGH) +#define BP_GPIO_28_AL (28 | BP_ACTIVE_LOW) +#define BP_GPIO_29_AH (29 | BP_ACTIVE_HIGH) +#define BP_GPIO_29_AL (29 | BP_ACTIVE_LOW) +#define BP_GPIO_30_AH (30 | BP_ACTIVE_HIGH) +#define BP_GPIO_30_AL (30 | BP_ACTIVE_LOW) +#define BP_GPIO_31_AH (31 | BP_ACTIVE_HIGH) +#define BP_GPIO_31_AL (31 | BP_ACTIVE_LOW) +#define BP_GPIO_32_AH (32 | BP_ACTIVE_HIGH) +#define BP_GPIO_32_AL (32 | BP_ACTIVE_LOW) +#define BP_GPIO_33_AH (33 | BP_ACTIVE_HIGH) +#define BP_GPIO_33_AL (33 | BP_ACTIVE_LOW) +#define BP_GPIO_34_AH (34 | BP_ACTIVE_HIGH) +#define BP_GPIO_34_AL (34 | BP_ACTIVE_LOW) +#define BP_GPIO_35_AH (35 | BP_ACTIVE_HIGH) +#define BP_GPIO_35_AL (35 | BP_ACTIVE_LOW) +#define BP_GPIO_36_AH (36 | BP_ACTIVE_HIGH) +#define BP_GPIO_36_AL (36 | BP_ACTIVE_LOW) + +/* Values for external interrupt assignments. */ +#define BP_EXT_INTR_0 0 +#define BP_EXT_INTR_1 1 +#define BP_EXT_INTR_2 2 +#define BP_EXT_INTR_3 3 + +/* Values for chip select assignments. */ +#define BP_CS_0 0 +#define BP_CS_1 1 +#define BP_CS_2 2 +#define BP_CS_3 3 + +/* Value for GPIO and external interrupt fields that are not used. */ +#define BP_NOT_DEFINED 0xffff +#define BP_HW_DEFINED 0xfff0 +#define BP_UNEQUIPPED 0xfff1 + +/* Maximum size of the board id string. */ +#define BP_BOARD_ID_LEN 16 + +/* Maximum number of Ethernet MACs. */ +#define BP_MAX_ENET_MACS 2 + +/* Maximum number of VoIP DSPs. */ +#define BP_MAX_VOIP_DSP 2 + +/* Wireless Antenna Settings. */ +#define BP_WLAN_ANT_MAIN 0 +#define BP_WLAN_ANT_AUX 1 +#define BP_WLAN_ANT_BOTH 3 + +#if !defined(__ASSEMBLER__) + +/* Information about an Ethernet MAC. If ucPhyType is BP_ENET_NO_PHY, + * then the other fields are not valid. + */ +typedef struct EthernetMacInfo +{ + unsigned char ucPhyType; /* BP_ENET_xxx */ + unsigned char ucPhyAddress; /* 0 to 31 */ + unsigned short usGpioPhySpiSck; /* GPIO pin or not defined */ + unsigned short usGpioPhySpiSs; /* GPIO pin or not defined */ + unsigned short usGpioPhySpiMosi; /* GPIO pin or not defined */ + unsigned short usGpioPhySpiMiso; /* GPIO pin or not defined */ + unsigned short usGpioPhyReset; /* GPIO pin or not defined (96348LV) */ + unsigned short numSwitchPorts; /* Number of PHY ports */ + unsigned short usConfigType; /* Configuration type */ + unsigned short usReverseMii; /* Reverse MII */ +} ETHERNET_MAC_INFO, *PETHERNET_MAC_INFO; + + +/* Information about VoIP DSPs. If ucDspType is BP_VOIP_NO_DSP, + * then the other fields are not valid. + */ +typedef struct VoIPDspInfo +{ + unsigned char ucDspType; + unsigned char ucDspAddress; + unsigned short usExtIntrVoip; + unsigned short usGpioVoipReset; + unsigned short usGpioVoipIntr; + unsigned short usGpioLedVoip; + unsigned short usCsVoip; + +} VOIP_DSP_INFO; + + +/************************************************************************** + * Name : BpSetBoardId + * + * Description: This function find the BOARD_PARAMETERS structure for the + * specified board id string and assigns it to a global, static + * variable. + * + * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not + * have a board parameters configuration record. + ***************************************************************************/ +int BpSetBoardId( char *pszBoardId ); + +/************************************************************************** + * Name : BpGetBoardIds + * + * Description: This function returns all of the supported board id strings. + * + * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id + * strings are returned in. Each id starts at BP_BOARD_ID_LEN + * boundary. + * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that + * were allocated in pszBoardIds. + * + * Returns : Number of board id strings returned. + ***************************************************************************/ +int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize ); + +/************************************************************************** + * Name : BpGetEthernetMacInfo + * + * Description: This function returns all of the supported board id strings. + * + * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO + * buffers. + * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that + * are pointed to by pEnetInfos. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + ***************************************************************************/ +int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos ); + +/************************************************************************** + * Name : BpGetSdramSize + * + * Description: This function returns a constant that describees the board's + * SDRAM type and size. + * + * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size + * is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + ***************************************************************************/ +int BpGetSdramSize( unsigned long *pulSdramSize ); + +/************************************************************************** + * Name : BpGetPsiSize + * + * Description: This function returns the persistent storage size in K bytes. + * + * Parameters : [OUT] pulPsiSize - Address of short word that the persistent + * storage size is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + ***************************************************************************/ +int BpGetPsiSize( unsigned long *pulPsiSize ); + +/************************************************************************** + * Name : BpGetRj11InnerOuterPairGpios + * + * Description: This function returns the GPIO pin assignments for changing + * between the RJ11 inner pair and RJ11 outer pair. + * + * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair + * GPIO pin is returned in. + * [OUT] pusOuter - Address of short word that the RJ11 outer pair + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, values are returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner, + unsigned short *pusOuter ); + +/************************************************************************** + * Name : BpGetPressAndHoldResetGpio + * + * Description: This function returns the GPIO pin assignment for the press + * and hold reset button. + * + * Parameters : [OUT] pusValue - Address of short word that the press and hold + * reset button GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetPressAndHoldResetGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetVoipResetGpio + * + * Description: This function returns the GPIO pin assignment for the VOIP + * Reset operation. + * + * Parameters : [OUT] pusValue - Address of short word that the VOIP reset + * GPIO pin is returned in. + * [IN] dspNum - Address of the DSP to query. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetVoipIntrGpio + * + * Description: This function returns the GPIO pin assignment for VoIP interrupt. + * + * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt + * GPIO pin is returned in. + * [IN] dspNum - Address of the DSP to query. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetPcmciaResetGpio + * + * Description: This function returns the GPIO pin assignment for the PCMCIA + * Reset operation. + * + * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetPcmciaResetGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetUartRtsCtsGpios + * + * Description: This function returns the GPIO pin assignments for RTS and CTS + * UART signals. + * + * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO + * pin is returned in. + * [OUT] pusCts - Address of short word that the UART CTS GPIO + * pin is returned in. + * + * Returns : BP_SUCCESS - Success, values are returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts ); + +/************************************************************************** + * Name : BpGetAdslLedGpio + * + * Description: This function returns the GPIO pin assignment for the ADSL + * LED. + * + * Parameters : [OUT] pusValue - Address of short word that the ADSL LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetAdslLedGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetAdslFailLedGpio + * + * Description: This function returns the GPIO pin assignment for the ADSL + * LED that is used when there is a DSL connection failure. + * + * Parameters : [OUT] pusValue - Address of short word that the ADSL LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetAdslFailLedGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetWirelessLedGpio + * + * Description: This function returns the GPIO pin assignment for the Wireless + * LED. + * + * Parameters : [OUT] pusValue - Address of short word that the Wireless LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetWirelessLedGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetWirelessAntInUse + * + * Description: This function returns the antennas in use for wireless + * + * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna + * is in use. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetWirelessAntInUse( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetWirelessSesBtnGpio + * + * Description: This function returns the GPIO pin assignment for the Wireless + * Ses Button. + * + * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses + * Button GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetWirelessSesBtnGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetWirelessSesExtIntr + * + * Description: This function returns the external interrupt number for the + * Wireless Ses Button. + * + * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses + * external interrup is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetWirelessSesExtIntr( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetWirelessSesLedGpio + * + * Description: This function returns the GPIO pin assignment for the Wireless + * Ses Led. + * + * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses + * Led GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetWirelessSesLedGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetUsbLedGpio + * + * Description: This function returns the GPIO pin assignment for the USB + * LED. + * + * Parameters : [OUT] pusValue - Address of short word that the USB LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetUsbLedGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetHpnaLedGpio + * + * Description: This function returns the GPIO pin assignment for the HPNA + * LED. + * + * Parameters : [OUT] pusValue - Address of short word that the HPNA LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetHpnaLedGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetWanDataLedGpio + * + * Description: This function returns the GPIO pin assignment for the WAN Data + * LED. + * + * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetWanDataLedGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetPppLedGpio + * + * Description: This function returns the GPIO pin assignment for the PPP + * LED. + * + * Parameters : [OUT] pusValue - Address of short word that the PPP LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetPppLedGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetPppFailLedGpio + * + * Description: This function returns the GPIO pin assignment for the PPP + * LED that is used when there is a PPP connection failure. + * + * Parameters : [OUT] pusValue - Address of short word that the PPP LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetPppFailLedGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetVoipLedGpio + * + * Description: This function returns the GPIO pin assignment for the VOIP + * LED. + * + * Parameters : [OUT] pusValue - Address of short word that the VOIP LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetVoipLedGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetBootloaderPowerOnLedGpio + * + * Description: This function returns the GPIO pin assignment for the power + * on LED that is set by the bootloader. + * + * Parameters : [OUT] pusValue - Address of short word that the alarm LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetBootloaderAlarmLedGpio + * + * Description: This function returns the GPIO pin assignment for the alarm + * LED that is set by the bootloader. + * + * Parameters : [OUT] pusValue - Address of short word that the alarm LED + * GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetBootloaderResetCfgLedGpio + * + * Description: This function returns the GPIO pin assignment for the reset + * configuration LED that is set by the bootloader. + * + * Parameters : [OUT] pusValue - Address of short word that the reset + * configuration LED GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetBootloaderStopLedGpio + * + * Description: This function returns the GPIO pin assignment for the break + * into bootloader LED that is set by the bootloader. + * + * Parameters : [OUT] pusValue - Address of short word that the break into + * bootloader LED GPIO pin is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetBootloaderStopLedGpio( unsigned short *pusValue ); + +/************************************************************************** + * Name : BpGetWirelessExtIntr + * + * Description: This function returns the Wireless external interrupt number. + * + * Parameters : [OUT] pulValue - Address of short word that the wireless + * external interrupt number is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetWirelessExtIntr( unsigned long *pulValue ); + +/************************************************************************** + * Name : BpGetAdslDyingGaspExtIntr + * + * Description: This function returns the ADSL Dying Gasp external interrupt + * number. + * + * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp + * external interrupt number is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue ); + +/************************************************************************** + * Name : BpGetVoipExtIntr + * + * Description: This function returns the VOIP external interrupt number. + * + * Parameters : [OUT] pulValue - Address of short word that the VOIP + * external interrupt number is returned in. + * [IN] dspNum - Address of the DSP to query. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue ); + +/************************************************************************** + * Name : BpGetHpnaExtIntr + * + * Description: This function returns the HPNA external interrupt number. + * + * Parameters : [OUT] pulValue - Address of short word that the HPNA + * external interrupt number is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetHpnaExtIntr( unsigned long *pulValue ); + +/************************************************************************** + * Name : BpGetHpnaChipSelect + * + * Description: This function returns the HPNA chip select number. + * + * Parameters : [OUT] pulValue - Address of short word that the HPNA + * chip select number is returned in. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetHpnaChipSelect( unsigned long *pulValue ); + +/************************************************************************** + * Name : BpGetVoipChipSelect + * + * Description: This function returns the VOIP chip select number. + * + * Parameters : [OUT] pulValue - Address of short word that the VOIP + * chip select number is returned in. + * [IN] dspNum - Address of the DSP to query. + * + * Returns : BP_SUCCESS - Success, value is returned. + * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. + * BP_VALUE_NOT_DEFINED - At least one return value is not defined + * for the board. + ***************************************************************************/ +int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue ); + +#endif /* __ASSEMBLER__ */ + +#endif /* _BOARDPARMS_H */ + |