diff options
Diffstat (limited to 'target/linux/brcm47xx-2.6')
10 files changed, 0 insertions, 3028 deletions
diff --git a/target/linux/brcm47xx-2.6/patches/100-board_support.patch b/target/linux/brcm47xx-2.6/patches/100-board_support.patch deleted file mode 100644 index d80a4fbc8..000000000 --- a/target/linux/brcm47xx-2.6/patches/100-board_support.patch +++ /dev/null @@ -1,202 +0,0 @@ -diff -urN linux.old/arch/mips/Kconfig linux.dev/arch/mips/Kconfig ---- linux.old/arch/mips/Kconfig 2007-01-26 00:51:33.000000000 +0100 -+++ linux.dev/arch/mips/Kconfig 2007-01-26 00:51:18.000000000 +0100 -@@ -4,6 +4,10 @@ - # Horrible source of confusion. Die, die, die ... - select EMBEDDED - -+config CFE -+ bool -+ # Common Firmware Environment -+ - mainmenu "Linux/MIPS Kernel Configuration" - - menu "Machine selection" -@@ -240,6 +240,23 @@ - Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and - Olivetti M700-10 workstations. - -+config BCM947XX -+ bool "Support for BCM947xx based boards" -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ select SSB -+ select SSB_SERIAL -+ select SSB_DRIVER_PCICORE -+ select SSB_PCICORE_HOSTMODE -+ select CFE -+ select GENERIC_GPIO -+ help -+ Support for BCM947xx based boards -+ - config LASAT - bool "LASAT Networks platforms" - select DMA_NONCOHERENT -diff -urN linux.old/arch/mips/kernel/cpu-probe.c linux.dev/arch/mips/kernel/cpu-probe.c ---- linux.old/arch/mips/kernel/cpu-probe.c 2007-01-26 00:51:33.000000000 +0100 -+++ linux.dev/arch/mips/kernel/cpu-probe.c 2007-01-25 23:34:01.000000000 +0100 -@@ -711,6 +711,28 @@ - } - - -+static inline void cpu_probe_broadcom(struct cpuinfo_mips *c) -+{ -+ decode_config1(c); -+ switch (c->processor_id & 0xff00) { -+ case PRID_IMP_BCM3302: -+ c->cputype = CPU_BCM3302; -+ c->isa_level = MIPS_CPU_ISA_M32R1; -+ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | -+ MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER; -+ break; -+ case PRID_IMP_BCM4710: -+ c->cputype = CPU_BCM4710; -+ c->isa_level = MIPS_CPU_ISA_M32R1; -+ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | -+ MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER; -+ break; -+ default: -+ c->cputype = CPU_UNKNOWN; -+ break; -+ } -+} -+ - __init void cpu_probe(void) - { - struct cpuinfo_mips *c = ¤t_cpu_data; -@@ -733,6 +755,9 @@ - case PRID_COMP_SIBYTE: - cpu_probe_sibyte(c); - break; -+ case PRID_COMP_BROADCOM: -+ cpu_probe_broadcom(c); -+ break; - case PRID_COMP_SANDCRAFT: - cpu_probe_sandcraft(c); - break; -diff -urN linux.old/arch/mips/kernel/proc.c linux.dev/arch/mips/kernel/proc.c ---- linux.old/arch/mips/kernel/proc.c 2007-01-26 00:51:33.000000000 +0100 -+++ linux.dev/arch/mips/kernel/proc.c 2007-01-25 23:34:01.000000000 +0100 -@@ -83,6 +83,8 @@ - [CPU_VR4181] = "NEC VR4181", - [CPU_VR4181A] = "NEC VR4181A", - [CPU_SR71000] = "Sandcraft SR71000", -+ [CPU_BCM3302] = "Broadcom BCM3302", -+ [CPU_BCM4710] = "Broadcom BCM4710", - [CPU_PR4450] = "Philips PR4450", - }; - -diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile ---- linux.old/arch/mips/Makefile 2007-01-26 00:51:33.000000000 +0100 -+++ linux.dev/arch/mips/Makefile 2007-01-25 23:34:01.000000000 +0100 -@@ -576,6 +576,18 @@ - load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000 - - # -+# Broadcom BCM47XX boards -+# -+core-$(CONFIG_BCM947XX) += arch/mips/bcm947xx/ -+cflags-$(CONFIG_BCM947XX) += -Iarch/mips/bcm947xx/include -Iinclude/asm-mips/mach-bcm947xx -+load-$(CONFIG_BCM947XX) := 0xffffffff80001000 -+ -+# -+# Common Firmware Environment -+# -+core-$(CONFIG_CFE) += arch/mips/cfe/ -+ -+# - # SNI RM - # - core-$(CONFIG_SNI_RM) += arch/mips/sni/ -diff -urN linux.old/arch/mips/mm/tlbex.c linux.dev/arch/mips/mm/tlbex.c ---- linux.old/arch/mips/mm/tlbex.c 2007-01-26 00:51:33.000000000 +0100 -+++ linux.dev/arch/mips/mm/tlbex.c 2007-01-25 23:34:01.000000000 +0100 -@@ -892,6 +892,8 @@ - case CPU_4KSC: - case CPU_20KC: - case CPU_25KF: -+ case CPU_BCM3302: -+ case CPU_BCM4710: - tlbw(p); - break; - -diff -urN linux.old/drivers/Kconfig linux.dev/drivers/Kconfig ---- linux.old/drivers/Kconfig 2007-01-26 00:51:33.000000000 +0100 -+++ linux.dev/drivers/Kconfig 2007-01-25 23:34:01.000000000 +0100 -@@ -56,6 +56,8 @@ - - source "drivers/hwmon/Kconfig" - -+source "drivers/ssb/Kconfig" -+ - source "drivers/mfd/Kconfig" - - source "drivers/media/Kconfig" -diff -urN linux.old/drivers/Makefile linux.dev/drivers/Makefile ---- linux.old/drivers/Makefile 2007-01-26 00:51:33.000000000 +0100 -+++ linux.dev/drivers/Makefile 2007-01-25 23:34:01.000000000 +0100 -@@ -81,3 +81,4 @@ - obj-$(CONFIG_DMA_ENGINE) += dma/ - obj-$(CONFIG_HID) += hid/ - obj-$(CONFIG_PPC_PS3) += ps3/ -+obj-$(CONFIG_SSB) += ssb/ -diff -urN linux.old/include/asm-mips/bootinfo.h linux.dev/include/asm-mips/bootinfo.h ---- linux.old/include/asm-mips/bootinfo.h 2007-01-26 00:51:33.000000000 +0100 -+++ linux.dev/include/asm-mips/bootinfo.h 2007-01-25 23:34:01.000000000 +0100 -@@ -213,6 +213,12 @@ - #define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */ - #define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */ - -+/* -+ * Valid machtype for group Broadcom -+ */ -+#define MACH_GROUP_BRCM 23 /* Broadcom */ -+#define MACH_BCM47XX 1 /* Broadcom BCM47xx */ -+ - #define CL_SIZE COMMAND_LINE_SIZE - - const char *get_system_type(void); -diff -urN linux.old/include/asm-mips/cpu.h linux.dev/include/asm-mips/cpu.h ---- linux.old/include/asm-mips/cpu.h 2007-01-26 00:51:33.000000000 +0100 -+++ linux.dev/include/asm-mips/cpu.h 2007-01-25 23:34:01.000000000 +0100 -@@ -104,6 +104,13 @@ - #define PRID_IMP_SR71000 0x0400 - - /* -+ * These are the PRID's for when 23:16 == PRID_COMP_BROADCOM -+ */ -+ -+#define PRID_IMP_BCM4710 0x4000 -+#define PRID_IMP_BCM3302 0x9000 -+ -+/* - * Definitions for 7:0 on legacy processors - */ - -@@ -200,7 +207,9 @@ - #define CPU_SB1A 62 - #define CPU_74K 63 - #define CPU_R14000 64 --#define CPU_LAST 64 -+#define CPU_BCM3302 65 -+#define CPU_BCM4710 66 -+#define CPU_LAST 66 - - /* - * ISA Level encodings -diff -urN linux.old/include/linux/pci_ids.h linux.dev/include/linux/pci_ids.h ---- linux.old/include/linux/pci_ids.h 2007-01-26 00:51:33.000000000 +0100 -+++ linux.dev/include/linux/pci_ids.h 2007-01-25 23:34:01.000000000 +0100 -@@ -1981,6 +1981,7 @@ - #define PCI_DEVICE_ID_TIGON3_5906M 0x1713 - #define PCI_DEVICE_ID_BCM4401 0x4401 - #define PCI_DEVICE_ID_BCM4401B0 0x4402 -+#define PCI_DEVICE_ID_BCM4713 0x4713 - - #define PCI_VENDOR_ID_TOPIC 0x151f - #define PCI_DEVICE_ID_TOPIC_TP560 0x0000 - diff --git a/target/linux/brcm47xx-2.6/patches/110-flash_map.patch b/target/linux/brcm47xx-2.6/patches/110-flash_map.patch deleted file mode 100644 index 13f36c291..000000000 --- a/target/linux/brcm47xx-2.6/patches/110-flash_map.patch +++ /dev/null @@ -1,28 +0,0 @@ -diff -urN linux.old/drivers/mtd/maps/Kconfig linux.dev/drivers/mtd/maps/Kconfig ---- linux.old/drivers/mtd/maps/Kconfig 2006-12-11 20:32:53.000000000 +0100 -+++ linux.dev/drivers/mtd/maps/Kconfig 2007-01-03 02:26:02.000000000 +0100 -@@ -326,6 +326,12 @@ - Mapping for the Flaga digital module. If you don't have one, ignore - this setting. - -+config MTD_BCM47XX -+ tristate "BCM47xx flash device" -+ depends on MIPS && MTD_CFI && BCM947XX -+ help -+ Support for the flash chips on the BCM947xx board. -+ - config MTD_BEECH - tristate "CFI Flash device mapped on IBM 405LP Beech" - depends on MTD_CFI && BEECH -diff -urN linux.old/drivers/mtd/maps/Makefile linux.dev/drivers/mtd/maps/Makefile ---- linux.old/drivers/mtd/maps/Makefile 2006-12-11 20:32:53.000000000 +0100 -+++ linux.dev/drivers/mtd/maps/Makefile 2007-01-03 02:26:02.000000000 +0100 -@@ -31,6 +31,7 @@ - obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o - obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o - obj-$(CONFIG_MTD_TQM8XXL) += tqm8xxl.o -+obj-$(CONFIG_MTD_BCM47XX) += bcm47xx-flash.o - obj-$(CONFIG_MTD_SA1100) += sa1100-flash.o - obj-$(CONFIG_MTD_IPAQ) += ipaq-flash.o - obj-$(CONFIG_MTD_SBC_GXX) += sbc_gxx.o - diff --git a/target/linux/brcm47xx-2.6/patches/120-b44_ssb_support.patch b/target/linux/brcm47xx-2.6/patches/120-b44_ssb_support.patch deleted file mode 100644 index 5b44774f9..000000000 --- a/target/linux/brcm47xx-2.6/patches/120-b44_ssb_support.patch +++ /dev/null @@ -1,1545 +0,0 @@ -diff -urN linux.old/drivers/net/b44.c linux.dev/drivers/net/b44.c ---- linux.old/drivers/net/b44.c 2006-12-11 20:32:53.000000000 +0100 -+++ linux.dev/drivers/net/b44.c 2007-01-03 02:26:02.000000000 +0100 -@@ -1,7 +1,9 @@ --/* b44.c: Broadcom 4400 device driver. -+/* b44.c: Broadcom 4400/47xx device driver. - * - * Copyright (C) 2002 David S. Miller (davem@redhat.com) -- * Fixed by Pekka Pietikainen (pp@ee.oulu.fi) -+ * Copyright (C) 2004 Pekka Pietikainen (pp@ee.oulu.fi) -+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) -+ * Copyright (C) 2006 Felix Fietkau (nbd@openwrt.org) - * Copyright (C) 2006 Broadcom Corporation. - * - * Distribute under GPL. -@@ -20,11 +22,13 @@ - #include <linux/delay.h> - #include <linux/init.h> - #include <linux/dma-mapping.h> -+#include <linux/ssb/ssb.h> - - #include <asm/uaccess.h> - #include <asm/io.h> - #include <asm/irq.h> - -+ - #include "b44.h" - - #define DRV_MODULE_NAME "b44" -@@ -86,8 +90,8 @@ - static char version[] __devinitdata = - DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; - --MODULE_AUTHOR("Florian Schirmer, Pekka Pietikainen, David S. Miller"); --MODULE_DESCRIPTION("Broadcom 4400 10/100 PCI ethernet driver"); -+MODULE_AUTHOR("Felix Fietkau, Florian Schirmer, Pekka Pietikainen, David S. Miller"); -+MODULE_DESCRIPTION("Broadcom 4400/47xx 10/100 PCI ethernet driver"); - MODULE_LICENSE("GPL"); - MODULE_VERSION(DRV_MODULE_VERSION); - -@@ -95,18 +99,11 @@ - module_param(b44_debug, int, 0); - MODULE_PARM_DESC(b44_debug, "B44 bitmapped debugging message enable value"); - --static struct pci_device_id b44_pci_tbl[] = { -- { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401, -- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, -- { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B0, -- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, -- { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B1, -- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, -- { } /* terminate list with empty entry */ -+static struct ssb_device_id b44_ssb_tbl[] = { -+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_ETHERNET, SSB_ANY_REV), -+ SSB_DEVTABLE_END - }; - --MODULE_DEVICE_TABLE(pci, b44_pci_tbl); -- - static void b44_halt(struct b44 *); - static void b44_init_rings(struct b44 *); - -@@ -118,6 +115,7 @@ - - static int dma_desc_align_mask; - static int dma_desc_sync_size; -+static int instance; - - static const char b44_gstrings[][ETH_GSTRING_LEN] = { - #define _B44(x...) # x, -@@ -125,35 +123,24 @@ - #undef _B44 - }; - --static inline void b44_sync_dma_desc_for_device(struct pci_dev *pdev, -- dma_addr_t dma_base, -- unsigned long offset, -- enum dma_data_direction dir) --{ -- dma_sync_single_range_for_device(&pdev->dev, dma_base, -- offset & dma_desc_align_mask, -- dma_desc_sync_size, dir); --} -- --static inline void b44_sync_dma_desc_for_cpu(struct pci_dev *pdev, -- dma_addr_t dma_base, -- unsigned long offset, -- enum dma_data_direction dir) --{ -- dma_sync_single_range_for_cpu(&pdev->dev, dma_base, -- offset & dma_desc_align_mask, -- dma_desc_sync_size, dir); --} -- --static inline unsigned long br32(const struct b44 *bp, unsigned long reg) --{ -- return readl(bp->regs + reg); --} -- --static inline void bw32(const struct b44 *bp, -- unsigned long reg, unsigned long val) --{ -- writel(val, bp->regs + reg); -+static inline void b44_sync_dma_desc_for_device(struct ssb_device *sdev, -+ dma_addr_t dma_base, -+ unsigned long offset, -+ enum dma_data_direction dir) -+{ -+ dma_sync_single_range_for_device(&sdev->dev, dma_base, -+ offset & dma_desc_align_mask, -+ dma_desc_sync_size, dir); -+} -+ -+static inline void b44_sync_dma_desc_for_cpu(struct ssb_device *sdev, -+ dma_addr_t dma_base, -+ unsigned long offset, -+ enum dma_data_direction dir) -+{ -+ dma_sync_single_range_for_cpu(&sdev->dev, dma_base, -+ offset & dma_desc_align_mask, -+ dma_desc_sync_size, dir); - } - - static int b44_wait_bit(struct b44 *bp, unsigned long reg, -@@ -181,117 +168,29 @@ - return 0; - } - --/* Sonics SiliconBackplane support routines. ROFL, you should see all the -- * buzz words used on this company's website :-) -- * -- * All of these routines must be invoked with bp->lock held and -- * interrupts disabled. -- */ -- --#define SB_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */ --#define BCM4400_PCI_CORE_ADDR 0x18002000 /* Address of PCI core on BCM4400 cards */ -- --static u32 ssb_get_core_rev(struct b44 *bp) --{ -- return (br32(bp, B44_SBIDHIGH) & SBIDHIGH_RC_MASK); --} -- --static u32 ssb_pci_setup(struct b44 *bp, u32 cores) --{ -- u32 bar_orig, pci_rev, val; -- -- pci_read_config_dword(bp->pdev, SSB_BAR0_WIN, &bar_orig); -- pci_write_config_dword(bp->pdev, SSB_BAR0_WIN, BCM4400_PCI_CORE_ADDR); -- pci_rev = ssb_get_core_rev(bp); -- -- val = br32(bp, B44_SBINTVEC); -- val |= cores; -- bw32(bp, B44_SBINTVEC, val); -- -- val = br32(bp, SSB_PCI_TRANS_2); -- val |= SSB_PCI_PREF | SSB_PCI_BURST; -- bw32(bp, SSB_PCI_TRANS_2, val); -- -- pci_write_config_dword(bp->pdev, SSB_BAR0_WIN, bar_orig); -- -- return pci_rev; --} -- --static void ssb_core_disable(struct b44 *bp) --{ -- if (br32(bp, B44_SBTMSLOW) & SBTMSLOW_RESET) -- return; -- -- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_CLOCK)); -- b44_wait_bit(bp, B44_SBTMSLOW, SBTMSLOW_REJECT, 100000, 0); -- b44_wait_bit(bp, B44_SBTMSHIGH, SBTMSHIGH_BUSY, 100000, 1); -- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_FGC | SBTMSLOW_CLOCK | -- SBTMSLOW_REJECT | SBTMSLOW_RESET)); -- br32(bp, B44_SBTMSLOW); -- udelay(1); -- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_RESET)); -- br32(bp, B44_SBTMSLOW); -- udelay(1); --} -- --static void ssb_core_reset(struct b44 *bp) -+static inline void __b44_cam_read(struct b44 *bp, unsigned char *data, int index) - { - u32 val; - -- ssb_core_disable(bp); -- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_RESET | SBTMSLOW_CLOCK | SBTMSLOW_FGC)); -- br32(bp, B44_SBTMSLOW); -- udelay(1); -- -- /* Clear SERR if set, this is a hw bug workaround. */ -- if (br32(bp, B44_SBTMSHIGH) & SBTMSHIGH_SERR) -- bw32(bp, B44_SBTMSHIGH, 0); -- -- val = br32(bp, B44_SBIMSTATE); -- if (val & (SBIMSTATE_IBE | SBIMSTATE_TO)) -- bw32(bp, B44_SBIMSTATE, val & ~(SBIMSTATE_IBE | SBIMSTATE_TO)); -- -- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK | SBTMSLOW_FGC)); -- br32(bp, B44_SBTMSLOW); -- udelay(1); -- -- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK)); -- br32(bp, B44_SBTMSLOW); -- udelay(1); --} -+ bw32(bp, B44_CAM_CTRL, (CAM_CTRL_READ | -+ (index << CAM_CTRL_INDEX_SHIFT))); - --static int ssb_core_unit(struct b44 *bp) --{ --#if 0 -- u32 val = br32(bp, B44_SBADMATCH0); -- u32 base; -+ b44_wait_bit(bp, B44_CAM_CTRL, CAM_CTRL_BUSY, 100, 1); - -- type = val & SBADMATCH0_TYPE_MASK; -- switch (type) { -- case 0: -- base = val & SBADMATCH0_BS0_MASK; -- break; -+ val = br32(bp, B44_CAM_DATA_LO); - -- case 1: -- base = val & SBADMATCH0_BS1_MASK; -- break; -+ data[2] = (val >> 24) & 0xFF; -+ data[3] = (val >> 16) & 0xFF; -+ data[4] = (val >> 8) & 0xFF; -+ data[5] = (val >> 0) & 0xFF; - -- case 2: -- default: -- base = val & SBADMATCH0_BS2_MASK; -- break; -- }; --#endif -- return 0; --} -+ val = br32(bp, B44_CAM_DATA_HI); - --static int ssb_is_core_up(struct b44 *bp) --{ -- return ((br32(bp, B44_SBTMSLOW) & (SBTMSLOW_RESET | SBTMSLOW_REJECT | SBTMSLOW_CLOCK)) -- == SBTMSLOW_CLOCK); -+ data[0] = (val >> 8) & 0xFF; -+ data[1] = (val >> 0) & 0xFF; - } - --static void __b44_cam_write(struct b44 *bp, unsigned char *data, int index) -+static inline void __b44_cam_write(struct b44 *bp, unsigned char *data, int index) - { - u32 val; - -@@ -327,14 +226,14 @@ - bw32(bp, B44_IMASK, bp->imask); - } - --static int b44_readphy(struct b44 *bp, int reg, u32 *val) -+static int __b44_readphy(struct b44 *bp, int phy_addr, int reg, u32 *val) - { - int err; - - bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII); - bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START | - (MDIO_OP_READ << MDIO_DATA_OP_SHIFT) | -- (bp->phy_addr << MDIO_DATA_PMD_SHIFT) | -+ (phy_addr << MDIO_DATA_PMD_SHIFT) | - (reg << MDIO_DATA_RA_SHIFT) | - (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT))); - err = b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0); -@@ -343,18 +242,34 @@ - return err; - } - --static int b44_writephy(struct b44 *bp, int reg, u32 val) -+static int __b44_writephy(struct b44 *bp, int phy_addr, int reg, u32 val) - { - bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII); - bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START | - (MDIO_OP_WRITE << MDIO_DATA_OP_SHIFT) | -- (bp->phy_addr << MDIO_DATA_PMD_SHIFT) | -+ (phy_addr << MDIO_DATA_PMD_SHIFT) | - (reg << MDIO_DATA_RA_SHIFT) | - (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT) | - (val & MDIO_DATA_DATA))); - return b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0); - } - -+static inline int b44_readphy(struct b44 *bp, int reg, u32 *val) -+{ -+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) -+ return 0; -+ -+ return __b44_readphy(bp, bp->phy_addr, reg, val); -+} -+ -+static inline int b44_writephy(struct b44 *bp, int reg, u32 val) -+{ -+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) -+ return 0; -+ -+ return __b44_writephy(bp, bp->phy_addr, reg, val); -+} -+ - /* miilib interface */ - /* FIXME FIXME: phy_id is ignored, bp->phy_addr use is unconditional - * due to code existing before miilib use was added to this driver. -@@ -383,6 +298,8 @@ - u32 val; - int err; - -+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) -+ return 0; - err = b44_writephy(bp, MII_BMCR, BMCR_RESET); - if (err) - return err; -@@ -441,11 +358,27 @@ - __b44_set_flow_ctrl(bp, pause_enab); - } - -+ -+extern char *nvram_get(char *name); //FIXME: move elsewhere - static int b44_setup_phy(struct b44 *bp) - { - u32 val; - int err; - -+ /* -+ * workaround for bad hardware design in Linksys WAP54G v1.0 -+ * see https://dev.openwrt.org/ticket/146 -+ * check and reset bit "isolate" -+ */ -+ if ((atoi(nvram_get("boardnum")) == 2) && -+ (__b44_readphy(bp, 0, MII_BMCR, &val) == 0) && -+ (val & BMCR_ISOLATE) && -+ (__b44_writephy(bp, 0, MII_BMCR, val & ~BMCR_ISOLATE) != 0)) { -+ printk(KERN_WARNING PFX "PHY: cannot reset MII transceiver isolate bit.\n"); -+ } -+ -+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) -+ return 0; - if ((err = b44_readphy(bp, B44_MII_ALEDCTRL, &val)) != 0) - goto out; - if ((err = b44_writephy(bp, B44_MII_ALEDCTRL, -@@ -541,6 +474,19 @@ - { - u32 bmsr, aux; - -+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) { -+ bp->flags |= B44_FLAG_100_BASE_T; -+ bp->flags |= B44_FLAG_FULL_DUPLEX; -+ if (!netif_carrier_ok(bp->dev)) { -+ u32 val = br32(bp, B44_TX_CTRL); -+ val |= TX_CTRL_DUPLEX; -+ bw32(bp, B44_TX_CTRL, val); -+ netif_carrier_on(bp->dev); -+ b44_link_report(bp); -+ } -+ return; -+ } -+ - if (!b44_readphy(bp, MII_BMSR, &bmsr) && - !b44_readphy(bp, B44_MII_AUXCTRL, &aux) && - (bmsr != 0xffff)) { -@@ -617,10 +563,10 @@ - - BUG_ON(skb == NULL); - -- pci_unmap_single(bp->pdev, -+ dma_unmap_single(&bp->sdev->dev, - pci_unmap_addr(rp, mapping), - skb->len, -- PCI_DMA_TODEVICE); -+ DMA_TO_DEVICE); - rp->skb = NULL; - dev_kfree_skb_irq(skb); - } -@@ -656,10 +602,10 @@ - skb = dev_alloc_skb(RX_PKT_BUF_SZ); - if (skb == NULL) - return -ENOMEM; -- -- mapping = pci_map_single(bp->pdev, skb->data, -+ -+ mapping = dma_map_single(&bp->sdev->dev, skb->data, - RX_PKT_BUF_SZ, -- PCI_DMA_FROMDEVICE); -+ DMA_FROM_DEVICE); - - /* Hardware bug work-around, the chip is unable to do PCI DMA - to/from anything above 1GB :-( */ -@@ -667,18 +613,18 @@ - mapping + RX_PKT_BUF_SZ > DMA_30BIT_MASK) { - /* Sigh... */ - if (!dma_mapping_error(mapping)) -- pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE); -+ dma_unmap_single(&bp->sdev->dev, mapping, RX_PKT_BUF_SZ,DMA_FROM_DEVICE); - dev_kfree_skb_any(skb); - skb = __dev_alloc_skb(RX_PKT_BUF_SZ,GFP_DMA); - if (skb == NULL) - return -ENOMEM; -- mapping = pci_map_single(bp->pdev, skb->data, -+ mapping = dma_map_single(&bp->sdev->dev, skb->data, - RX_PKT_BUF_SZ, -- PCI_DMA_FROMDEVICE); -+ DMA_FROM_DEVICE); - if (dma_mapping_error(mapping) || - mapping + RX_PKT_BUF_SZ > DMA_30BIT_MASK) { - if (!dma_mapping_error(mapping)) -- pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE); -+ dma_unmap_single(&bp->sdev->dev, mapping, RX_PKT_BUF_SZ,DMA_FROM_DEVICE); - dev_kfree_skb_any(skb); - return -ENOMEM; - } -@@ -707,9 +653,9 @@ - dp->addr = cpu_to_le32((u32) mapping + bp->rx_offset + bp->dma_offset); - - if (bp->flags & B44_FLAG_RX_RING_HACK) -- b44_sync_dma_desc_for_device(bp->pdev, bp->rx_ring_dma, -- dest_idx * sizeof(dp), -- DMA_BIDIRECTIONAL); -+ b44_sync_dma_desc_for_device(bp->sdev, bp->rx_ring_dma, -+ dest_idx * sizeof(dp), -+ DMA_BIDIRECTIONAL); - - return RX_PKT_BUF_SZ; - } -@@ -736,9 +682,9 @@ - pci_unmap_addr(src_map, mapping)); - - if (bp->flags & B44_FLAG_RX_RING_HACK) -- b44_sync_dma_desc_for_cpu(bp->pdev, bp->rx_ring_dma, -- src_idx * sizeof(src_desc), -- DMA_BIDIRECTIONAL); -+ b44_sync_dma_desc_for_cpu(bp->sdev, bp->rx_ring_dma, -+ src_idx * sizeof(src_desc), -+ DMA_BIDIRECTIONAL); - - ctrl = src_desc->ctrl; - if (dest_idx == (B44_RX_RING_SIZE - 1)) -@@ -752,13 +698,13 @@ - src_map->skb = NULL; - - if (bp->flags & B44_FLAG_RX_RING_HACK) -- b44_sync_dma_desc_for_device(bp->pdev, bp->rx_ring_dma, -- dest_idx * sizeof(dest_desc), -- DMA_BIDIRECTIONAL); -+ b44_sync_dma_desc_for_device(bp->sdev, bp->rx_ring_dma, -+ dest_idx * sizeof(dest_desc), -+ DMA_BIDIRECTIONAL); - -- pci_dma_sync_single_for_device(bp->pdev, le32_to_cpu(src_desc->addr), -+ dma_sync_single_for_device(&bp->sdev->dev, le32_to_cpu(src_desc->addr), - RX_PKT_BUF_SZ, -- PCI_DMA_FROMDEVICE); -+ DMA_FROM_DEVICE); - } - - static int b44_rx(struct b44 *bp, int budget) -@@ -778,9 +724,9 @@ - struct rx_header *rh; - u16 len; - -- pci_dma_sync_single_for_cpu(bp->pdev, map, -+ dma_sync_single_for_cpu(&bp->sdev->dev, map, - RX_PKT_BUF_SZ, -- PCI_DMA_FROMDEVICE); -+ DMA_FROM_DEVICE); - rh = (struct rx_header *) skb->data; - len = le16_to_cpu(rh->len); - if ((len > (RX_PKT_BUF_SZ - bp->rx_offset)) || -@@ -812,11 +758,11 @@ - skb_size = b44_alloc_rx_skb(bp, cons, bp->rx_prod); - if (skb_size < 0) - goto drop_it; -- pci_unmap_single(bp->pdev, map, -- skb_size, PCI_DMA_FROMDEVICE); -+ dma_unmap_single(&bp->sdev->dev, map, -+ skb_size, DMA_FROM_DEVICE); - /* Leave out rx_header */ -- skb_put(skb, len+bp->rx_offset); -- skb_pull(skb,bp->rx_offset); -+ skb_put(skb, len+bp->rx_offset); -+ skb_pull(skb,bp->rx_offset); - } else { - struct sk_buff *copy_skb; - -@@ -986,23 +932,23 @@ - goto err_out; - } - -- mapping = pci_map_single(bp->pdev, skb->data, len, PCI_DMA_TODEVICE); -+ mapping = dma_map_single(&bp->sdev->dev, skb->data, len, DMA_TO_DEVICE); - if (dma_mapping_error(mapping) || mapping + len > DMA_30BIT_MASK) { - /* Chip can't handle DMA to/from >1GB, use bounce buffer */ - if (!dma_mapping_error(mapping)) -- pci_unmap_single(bp->pdev, mapping, len, PCI_DMA_TODEVICE); -+ dma_unmap_single(&bp->sdev->dev, mapping, len, DMA_TO_DEVICE); - - bounce_skb = __dev_alloc_skb(TX_PKT_BUF_SZ, - GFP_ATOMIC|GFP_DMA); - if (!bounce_skb) - goto err_out; - -- mapping = pci_map_single(bp->pdev, bounce_skb->data, -- len, PCI_DMA_TODEVICE); -+ mapping = dma_map_single(&bp->sdev->dev, bounce_skb->data, -+ len, DMA_TO_DEVICE); - if (dma_mapping_error(mapping) || mapping + len > DMA_30BIT_MASK) { - if (!dma_mapping_error(mapping)) -- pci_unmap_single(bp->pdev, mapping, -- len, PCI_DMA_TODEVICE); -+ dma_unmap_single(&bp->sdev->dev, mapping, -+ len, DMA_TO_DEVICE); - dev_kfree_skb_any(bounce_skb); - goto err_out; - } -@@ -1025,9 +971,9 @@ - bp->tx_ring[entry].addr = cpu_to_le32((u32) mapping+bp->dma_offset); - - if (bp->flags & B44_FLAG_TX_RING_HACK) -- b44_sync_dma_desc_for_device(bp->pdev, bp->tx_ring_dma, -- entry * sizeof(bp->tx_ring[0]), -- DMA_TO_DEVICE); -+ b44_sync_dma_desc_for_device(bp->sdev, bp->tx_ring_dma, -+ entry * sizeof(bp->tx_ring[0]), -+ DMA_TO_DEVICE); - - entry = NEXT_TX(entry); - -@@ -1100,10 +1046,10 @@ - - if (rp->skb == NULL) - continue; -- pci_unmap_single(bp->pdev, -+ dma_unmap_single(&bp->sdev->dev, - pci_unmap_addr(rp, mapping), - RX_PKT_BUF_SZ, -- PCI_DMA_FROMDEVICE); -+ DMA_FROM_DEVICE); - dev_kfree_skb_any(rp->skb); - rp->skb = NULL; - } -@@ -1114,10 +1060,10 @@ - - if (rp->skb == NULL) - continue; -- pci_unmap_single(bp->pdev, -+ dma_unmap_single(&bp->sdev->dev, - pci_unmap_addr(rp, mapping), - rp->skb->len, -- PCI_DMA_TODEVICE); -+ DMA_TO_DEVICE); - dev_kfree_skb_any(rp->skb); - rp->skb = NULL; - } -@@ -1139,14 +1085,14 @@ - memset(bp->tx_ring, 0, B44_TX_RING_BYTES); - - if (bp->flags & B44_FLAG_RX_RING_HACK) -- dma_sync_single_for_device(&bp->pdev->dev, bp->rx_ring_dma, -- DMA_TABLE_BYTES, -- PCI_DMA_BIDIRECTIONAL); -+ dma_sync_single_for_device(&bp->sdev->dev, bp->rx_ring_dma, -+ DMA_TABLE_BYTES, -+ DMA_BIDIRECTIONAL); - - if (bp->flags & B44_FLAG_TX_RING_HACK) -- dma_sync_single_for_device(&bp->pdev->dev, bp->tx_ring_dma, -- DMA_TABLE_BYTES, -- PCI_DMA_TODEVICE); -+ dma_sync_single_for_device(&bp->sdev->dev, bp->tx_ring_dma, -+ DMA_TABLE_BYTES, -+ DMA_TO_DEVICE); - - for (i = 0; i < bp->rx_pending; i++) { - if (b44_alloc_rx_skb(bp, -1, i) < 0) -@@ -1166,24 +1112,24 @@ - bp->tx_buffers = NULL; - if (bp->rx_ring) { - if (bp->flags & B44_FLAG_RX_RING_HACK) { -- dma_unmap_single(&bp->pdev->dev, bp->rx_ring_dma, -- DMA_TABLE_BYTES, -- DMA_BIDIRECTIONAL); -+ dma_unmap_single(&bp->sdev->dev, bp->rx_ring_dma, -+ DMA_TABLE_BYTES, -+ DMA_BIDIRECTIONAL); - kfree(bp->rx_ring); - } else -- pci_free_consistent(bp->pdev, DMA_TABLE_BYTES, -+ dma_free_coherent(&bp->sdev->dev, DMA_TABLE_BYTES, - bp->rx_ring, bp->rx_ring_dma); - bp->rx_ring = NULL; - bp->flags &= ~B44_FLAG_RX_RING_HACK; - } - if (bp->tx_ring) { - if (bp->flags & B44_FLAG_TX_RING_HACK) { -- dma_unmap_single(&bp->pdev->dev, bp->tx_ring_dma, -- DMA_TABLE_BYTES, -- DMA_TO_DEVICE); -+ dma_unmap_single(&bp->sdev->dev, bp->tx_ring_dma, -+ DMA_TABLE_BYTES, -+ DMA_TO_DEVICE); - kfree(bp->tx_ring); - } else -- pci_free_consistent(bp->pdev, DMA_TABLE_BYTES, -+ dma_free_coherent(&bp->sdev->dev, DMA_TABLE_BYTES, - bp->tx_ring, bp->tx_ring_dma); - bp->tx_ring = NULL; - bp->flags &= ~B44_FLAG_TX_RING_HACK; -@@ -1209,7 +1155,7 @@ - goto out_err; - - size = DMA_TABLE_BYTES; -- bp->rx_ring = pci_alloc_consistent(bp->pdev, size, &bp->rx_ring_dma); -+ bp->rx_ring = dma_alloc_coherent(&bp->sdev->dev, size, &bp->rx_ring_dma, GFP_ATOMIC); - if (!bp->rx_ring) { - /* Allocation may have failed due to pci_alloc_consistent - insisting on use of GFP_DMA, which is more restrictive -@@ -1221,9 +1167,9 @@ - if (!rx_ring) - goto out_err; - -- rx_ring_dma = dma_map_single(&bp->pdev->dev, rx_ring, -- DMA_TABLE_BYTES, -- DMA_BIDIRECTIONAL); -+ rx_ring_dma = dma_map_single(&bp->sdev->dev, rx_ring, -+ DMA_TABLE_BYTES, -+ DMA_BIDIRECTIONAL); - - if (dma_mapping_error(rx_ring_dma) || - rx_ring_dma + size > DMA_30BIT_MASK) { -@@ -1236,9 +1182,9 @@ - bp->flags |= B44_FLAG_RX_RING_HACK; - } - -- bp->tx_ring = pci_alloc_consistent(bp->pdev, size, &bp->tx_ring_dma); -+ bp->tx_ring = dma_alloc_coherent(&bp->sdev->dev, size, &bp->tx_ring_dma, GFP_ATOMIC); - if (!bp->tx_ring) { -- /* Allocation may have failed due to pci_alloc_consistent -+ /* Allocation may have failed due to dma_alloc_coherent - insisting on use of GFP_DMA, which is more restrictive - than necessary... */ - struct dma_desc *tx_ring; -@@ -1248,9 +1194,9 @@ - if (!tx_ring) - goto out_err; - -- tx_ring_dma = dma_map_single(&bp->pdev->dev, tx_ring, -- DMA_TABLE_BYTES, -- DMA_TO_DEVICE); -+ tx_ring_dma = dma_map_single(&bp->sdev->dev, tx_ring, -+ DMA_TABLE_BYTES, -+ DMA_TO_DEVICE); - - if (dma_mapping_error(tx_ring_dma) || - tx_ring_dma + size > DMA_30BIT_MASK) { -@@ -1285,7 +1231,9 @@ - /* bp->lock is held. */ - static void b44_chip_reset(struct b44 *bp) - { -- if (ssb_is_core_up(bp)) { -+ struct ssb_device *sdev = bp->sdev; -+ -+ if (ssb_device_is_enabled(bp->sdev)) { - bw32(bp, B44_RCV_LAZY, 0); - bw32(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE); - b44_wait_bit(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE, 200, 1); -@@ -1297,19 +1245,23 @@ - } - bw32(bp, B44_DMARX_CTRL, 0); - bp->rx_prod = bp->rx_cons = 0; -- } else { -- ssb_pci_setup(bp, (bp->core_unit == 0 ? -- SBINTVEC_ENET0 : -- SBINTVEC_ENET1)); - } - -- ssb_core_reset(bp); -- -+ ssb_device_enable(bp->sdev, 0); - b44_clear_stats(bp); - -- /* Make PHY accessible. */ -- bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE | -+ switch (sdev->bus->bustype) { -+ case SSB_BUSTYPE_SSB: -+ bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE | -+ (((ssb_clockspeed(sdev->bus) + (B44_MDC_RATIO / 2)) / B44_MDC_RATIO) -+ & MDIO_CTRL_MAXF_MASK))); -+ break; -+ case SSB_BUSTYPE_PCI: -+ bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE | - (0x0d & MDIO_CTRL_MAXF_MASK))); -+ break; -+ } -+ - br32(bp, B44_MDIO_CTRL); - - if (!(br32(bp, B44_DEVCTRL) & DEVCTRL_IPP)) { -@@ -1352,6 +1304,7 @@ - { - struct b44 *bp = netdev_priv(dev); - struct sockaddr *addr = p; -+ u32 val; - - if (netif_running(dev)) - return -EBUSY; -@@ -1362,7 +1315,11 @@ - memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); - - spin_lock_irq(&bp->lock); -- __b44_set_mac_addr(bp); -+ -+ val = br32(bp, B44_RXCONFIG); -+ if (!(val & RXCONFIG_CAM_ABSENT)) -+ __b44_set_mac_addr(bp); -+ - spin_unlock_irq(&bp->lock); - - return 0; -@@ -1448,18 +1405,6 @@ - return err; - } - --#if 0 --/*static*/ void b44_dump_state(struct b44 *bp) --{ -- u32 val32, val32_2, val32_3, val32_4, val32_5; -- u16 val16; -- -- pci_read_config_word(bp->pdev, PCI_STATUS, &val16); -- printk("DEBUG: PCI status [%04x] \n", val16); -- --} --#endif -- - #ifdef CONFIG_NET_POLL_CONTROLLER - /* - * Polling receive - used by netconsole and other diagnostic tools -@@ -1574,7 +1519,6 @@ - static void b44_setup_wol(struct b44 *bp) - { - u32 val; -- u16 pmval; - - bw32(bp, B44_RXCONFIG, RXCONFIG_ALLMULTI); - -@@ -1598,13 +1542,6 @@ - } else { - b44_setup_pseudo_magicp(bp); - } -- -- val = br32(bp, B44_SBTMSLOW); -- bw32(bp, B44_SBTMSLOW, val | SBTMSLOW_PE); -- -- pci_read_config_word(bp->pdev, SSB_PMCSR, &pmval); -- pci_write_config_word(bp->pdev, SSB_PMCSR, pmval | SSB_PE); -- - } - - static int b44_close(struct net_device *dev) -@@ -1704,7 +1641,7 @@ - - val = br32(bp, B44_RXCONFIG); - val &= ~(RXCONFIG_PROMISC | RXCONFIG_ALLMULTI); -- if (dev->flags & IFF_PROMISC) { -+ if ((dev->flags & IFF_PROMISC) || (val & RXCONFIG_CAM_ABSENT)) { - val |= RXCONFIG_PROMISC; - bw32(bp, B44_RXCONFIG, val); - } else { -@@ -1751,12 +1688,8 @@ - - static void b44_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info) - { -- struct b44 *bp = netdev_priv(dev); -- struct pci_dev *pci_dev = bp->pdev; -- - strcpy (info->driver, DRV_MODULE_NAME); - strcpy (info->version, DRV_MODULE_VERSION); -- strcpy (info->bus_info, pci_name(pci_dev)); - } - - static int b44_nway_reset(struct net_device *dev) -@@ -2040,6 +1973,245 @@ - .get_perm_addr = ethtool_op_get_perm_addr, - }; - -+static int b44_ethtool_ioctl (struct net_device *dev, void __user *useraddr) -+{ -+ struct b44 *bp = dev->priv; -+ u32 ethcmd; -+ -+ if (copy_from_user (ðcmd, useraddr, sizeof (ethcmd))) -+ return -EFAULT; -+ -+ switch (ethcmd) { -+ case ETHTOOL_GDRVINFO: { -+ struct ethtool_drvinfo info = { ETHTOOL_GDRVINFO }; -+ strcpy (info.driver, DRV_MODULE_NAME); -+ strcpy (info.version, DRV_MODULE_VERSION); -+ memset(&info.fw_version, 0, sizeof(info.fw_version)); -+ info.eedump_len = 0; -+ info.regdump_len = 0; -+ if (copy_to_user (useraddr, &info, sizeof (info))) -+ return -EFAULT; -+ return 0; -+ } -+ -+ case ETHTOOL_GSET: { -+ struct ethtool_cmd cmd = { ETHTOOL_GSET }; -+ -+ if (!(bp->flags & B44_FLAG_INIT_COMPLETE)) -+ return -EAGAIN; -+ cmd.supported = (SUPPORTED_Autoneg); -+ cmd.supported |= (SUPPORTED_100baseT_Half | -+ SUPPORTED_100baseT_Full | -+ SUPPORTED_10baseT_Half | -+ SUPPORTED_10baseT_Full | -+ SUPPORTED_MII); -+ -+ cmd.advertising = 0; -+ if (bp->flags & B44_FLAG_ADV_10HALF) -+ cmd.advertising |= ADVERTISE_10HALF; -+ if (bp->flags & B44_FLAG_ADV_10FULL) -+ cmd.advertising |= ADVERTISE_10FULL; -+ if (bp->flags & B44_FLAG_ADV_100HALF) -+ cmd.advertising |= ADVERTISE_100HALF; -+ if (bp->flags & B44_FLAG_ADV_100FULL) -+ cmd.advertising |= ADVERTISE_100FULL; -+ cmd.advertising |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; -+ cmd.speed = (bp->flags & B44_FLAG_100_BASE_T) ? -+ SPEED_100 : SPEED_10; -+ cmd.duplex = (bp->flags & B44_FLAG_FULL_DUPLEX) ? -+ DUPLEX_FULL : DUPLEX_HALF; -+ cmd.port = 0; -+ cmd.phy_address = bp->phy_addr; -+ cmd.transceiver = (bp->flags & B44_FLAG_INTERNAL_PHY) ? -+ XCVR_INTERNAL : XCVR_EXTERNAL; -+ cmd.autoneg = (bp->flags & B44_FLAG_FORCE_LINK) ? -+ AUTONEG_DISABLE : AUTONEG_ENABLE; -+ cmd.maxtxpkt = 0; -+ cmd.maxrxpkt = 0; -+ if (copy_to_user(useraddr, &cmd, sizeof(cmd))) -+ return -EFAULT; -+ return 0; -+ } -+ case ETHTOOL_SSET: { -+ struct ethtool_cmd cmd; -+ -+ if (!(bp->flags & B44_FLAG_INIT_COMPLETE)) -+ return -EAGAIN; -+ -+ if (copy_from_user(&cmd, useraddr, sizeof(cmd))) -+ return -EFAULT; -+ -+ /* We do not support gigabit. */ -+ if (cmd.autoneg == AUTONEG_ENABLE) { -+ if (cmd.advertising & -+ (ADVERTISED_1000baseT_Half | -+ ADVERTISED_1000baseT_Full)) -+ return -EINVAL; -+ } else if ((cmd.speed != SPEED_100 && -+ cmd.speed != SPEED_10) || -+ (cmd.duplex != DUPLEX_HALF && -+ cmd.duplex != DUPLEX_FULL)) { -+ return -EINVAL; -+ } -+ -+ spin_lock_irq(&bp->lock); -+ -+ if (cmd.autoneg == AUTONEG_ENABLE) { -+ bp->flags &= ~B44_FLAG_FORCE_LINK; -+ bp->flags &= ~(B44_FLAG_ADV_10HALF | -+ B44_FLAG_ADV_10FULL | -+ B44_FLAG_ADV_100HALF | -+ B44_FLAG_ADV_100FULL); -+ if (cmd.advertising & ADVERTISE_10HALF) -+ bp->flags |= B44_FLAG_ADV_10HALF; -+ if (cmd.advertising & ADVERTISE_10FULL) -+ bp->flags |= B44_FLAG_ADV_10FULL; -+ if (cmd.advertising & ADVERTISE_100HALF) -+ bp->flags |= B44_FLAG_ADV_100HALF; -+ if (cmd.advertising & ADVERTISE_100FULL) -+ bp->flags |= B44_FLAG_ADV_100FULL; -+ } else { -+ bp->flags |= B44_FLAG_FORCE_LINK; -+ if (cmd.speed == SPEED_100) -+ bp->flags |= B44_FLAG_100_BASE_T; -+ if (cmd.duplex == DUPLEX_FULL) -+ bp->flags |= B44_FLAG_FULL_DUPLEX; -+ } -+ -+ b44_setup_phy(bp); -+ -+ spin_unlock_irq(&bp->lock); -+ -+ return 0; -+ } -+ -+ case ETHTOOL_GMSGLVL: { -+ struct ethtool_value edata = { ETHTOOL_GMSGLVL }; -+ edata.data = bp->msg_enable; -+ if (copy_to_user(useraddr, &edata, sizeof(edata))) -+ return -EFAULT; -+ return 0; -+ } -+ case ETHTOOL_SMSGLVL: { -+ struct ethtool_value edata; -+ if (copy_from_user(&edata, useraddr, sizeof(edata))) -+ return -EFAULT; -+ bp->msg_enable = edata.data; -+ return 0; -+ } -+ case ETHTOOL_NWAY_RST: { -+ u32 bmcr; -+ int r; -+ -+ spin_lock_irq(&bp->lock); -+ b44_readphy(bp, MII_BMCR, &bmcr); -+ b44_readphy(bp, MII_BMCR, &bmcr); -+ r = -EINVAL; -+ if (bmcr & BMCR_ANENABLE) { -+ b44_writephy(bp, MII_BMCR, -+ bmcr | BMCR_ANRESTART); -+ r = 0; -+ } -+ spin_unlock_irq(&bp->lock); -+ -+ return r; -+ } -+ case ETHTOOL_GLINK: { -+ struct ethtool_value edata = { ETHTOOL_GLINK }; -+ edata.data = netif_carrier_ok(bp->dev) ? 1 : 0; -+ if (copy_to_user(useraddr, &edata, sizeof(edata))) -+ return -EFAULT; -+ return 0; -+ } -+ case ETHTOOL_GRINGPARAM: { -+ struct ethtool_ringparam ering = { ETHTOOL_GRINGPARAM }; -+ -+ ering.rx_max_pending = B44_RX_RING_SIZE - 1; -+ ering.rx_pending = bp->rx_pending; -+ -+ /* XXX ethtool lacks a tx_max_pending, oops... */ -+ -+ if (copy_to_user(useraddr, &ering, sizeof(ering))) -+ return -EFAULT; -+ return 0; -+ } -+ case ETHTOOL_SRINGPARAM: { -+ struct ethtool_ringparam ering; -+ -+ if (copy_from_user(&ering, useraddr, sizeof(ering))) -+ return -EFAULT; -+ -+ if ((ering.rx_pending > B44_RX_RING_SIZE - 1) || -+ (ering.rx_mini_pending != 0) || -+ (ering.rx_jumbo_pending != 0) || -+ (ering.tx_pending > B44_TX_RING_SIZE - 1)) -+ return -EINVAL; -+ -+ spin_lock_irq(&bp->lock); -+ -+ bp->rx_pending = ering.rx_pending; -+ bp->tx_pending = ering.tx_pending; -+ -+ b44_halt(bp); -+ b44_init_rings(bp); -+ b44_init_hw(bp, 1); -+ netif_wake_queue(bp->dev); -+ spin_unlock_irq(&bp->lock); -+ -+ b44_enable_ints(bp); -+ -+ return 0; -+ } -+ case ETHTOOL_GPAUSEPARAM: { -+ struct ethtool_pauseparam epause = { ETHTOOL_GPAUSEPARAM }; -+ -+ epause.autoneg = -+ (bp->flags & B44_FLAG_PAUSE_AUTO) != 0; -+ epause.rx_pause = -+ (bp->flags & B44_FLAG_RX_PAUSE) != 0; -+ epause.tx_pause = -+ (bp->flags & B44_FLAG_TX_PAUSE) != 0; -+ if (copy_to_user(useraddr, &epause, sizeof(epause))) -+ return -EFAULT; -+ return 0; -+ } -+ case ETHTOOL_SPAUSEPARAM: { -+ struct ethtool_pauseparam epause; -+ -+ if (copy_from_user(&epause, useraddr, sizeof(epause))) -+ return -EFAULT; -+ -+ spin_lock_irq(&bp->lock); -+ if (epause.autoneg) -+ bp->flags |= B44_FLAG_PAUSE_AUTO; -+ else -+ bp->flags &= ~B44_FLAG_PAUSE_AUTO; -+ if (epause.rx_pause) -+ bp->flags |= B44_FLAG_RX_PAUSE; -+ else -+ bp->flags &= ~B44_FLAG_RX_PAUSE; -+ if (epause.tx_pause) -+ bp->flags |= B44_FLAG_TX_PAUSE; -+ else -+ bp->flags &= ~B44_FLAG_TX_PAUSE; -+ if (bp->flags & B44_FLAG_PAUSE_AUTO) { -+ b44_halt(bp); -+ b44_init_rings(bp); -+ b44_init_hw(bp, 1); -+ } else { -+ __b44_set_flow_ctrl(bp, bp->flags); -+ } -+ spin_unlock_irq(&bp->lock); -+ -+ b44_enable_ints(bp); -+ -+ return 0; -+ } -+ }; -+ -+ return -EOPNOTSUPP; -+} -+ - static int b44_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) - { - struct mii_ioctl_data *data = if_mii(ifr); -@@ -2049,40 +2221,64 @@ - if (!netif_running(dev)) - goto out; - -- spin_lock_irq(&bp->lock); -- err = generic_mii_ioctl(&bp->mii_if, data, cmd, NULL); -- spin_unlock_irq(&bp->lock); --out: -- return err; --} -+ switch (cmd) { -+ case SIOCETHTOOL: -+ return b44_ethtool_ioctl(dev, (void __user*) ifr->ifr_data); - --/* Read 128-bytes of EEPROM. */ --static int b44_read_eeprom(struct b44 *bp, u8 *data) --{ -- long i; -- __le16 *ptr = (__le16 *) data; -+ case SIOCGMIIPHY: -+ data->phy_id = bp->phy_addr; - -- for (i = 0; i < 128; i += 2) -- ptr[i / 2] = cpu_to_le16(readw(bp->regs + 4096 + i)); -+ /* fallthru */ -+ case SIOCGMIIREG: { -+ u32 mii_regval; -+ spin_lock_irq(&bp->lock); -+ err = __b44_readphy(bp, data->phy_id & 0x1f, data->reg_num & 0x1f, &mii_regval); -+ spin_unlock_irq(&bp->lock); - -- return 0; -+ data->val_out = mii_regval; -+ -+ return err; -+ } -+ -+ case SIOCSMIIREG: -+ if (!capable(CAP_NET_ADMIN)) -+ return -EPERM; -+ -+ spin_lock_irq(&bp->lock); -+ err = __b44_writephy(bp, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in); -+ spin_unlock_irq(&bp->lock); -+ -+ return err; -+ -+ default: -+ break; -+ }; -+ return -EOPNOTSUPP; -+ -+out: -+ return err; - } - - static int __devinit b44_get_invariants(struct b44 *bp) - { -- u8 eeprom[128]; -- int err; -+ struct ssb_device *sdev = bp->sdev; -+ int err = 0; -+ u8 *addr; - -- err = b44_read_eeprom(bp, &eeprom[0]); -- if (err) -- goto out; -+ bp->dma_offset = ssb_dma_translation(sdev); - -- bp->dev->dev_addr[0] = eeprom[79]; -- bp->dev->dev_addr[1] = eeprom[78]; -- bp->dev->dev_addr[2] = eeprom[81]; -- bp->dev->dev_addr[3] = eeprom[80]; -- bp->dev->dev_addr[4] = eeprom[83]; -- bp->dev->dev_addr[5] = eeprom[82]; -+ switch (instance) { -+ case 1: -+ addr = sdev->bus->sprom.r1.et0mac; -+ bp->phy_addr = sdev->bus->sprom.r1.et0phyaddr; -+ break; -+ default: -+ addr = sdev->bus->sprom.r1.et1mac; -+ bp->phy_addr = sdev->bus->sprom.r1.et1phyaddr; -+ break; -+ } -+ -+ memcpy(bp->dev->dev_addr, addr, 6); - - if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){ - printk(KERN_ERR PFX "Invalid MAC address found in EEPROM\n"); -@@ -2091,108 +2287,52 @@ - - memcpy(bp->dev->perm_addr, bp->dev->dev_addr, bp->dev->addr_len); - -- bp->phy_addr = eeprom[90] & 0x1f; -- - /* With this, plus the rx_header prepended to the data by the - * hardware, we'll land the ethernet header on a 2-byte boundary. - */ - bp->rx_offset = 30; -- - bp->imask = IMASK_DEF; -- -- bp->core_unit = ssb_core_unit(bp); -- bp->dma_offset = SB_PCI_DMA; -- - /* XXX - really required? - bp->flags |= B44_FLAG_BUGGY_TXPTR; -- */ -+ */ - -- if (ssb_get_core_rev(bp) >= 7) -- bp->flags |= B44_FLAG_B0_ANDLATER; -- --out: - return err; - } - --static int __devinit b44_init_one(struct pci_dev *pdev, -- const struct pci_device_id *ent) -+static int __devinit b44_init_one(struct ssb_device *sdev, -+ const struct ssb_device_id *ent) - { - static int b44_version_printed = 0; -- unsigned long b44reg_base, b44reg_len; - struct net_device *dev; - struct b44 *bp; - int err, i; - -+ instance++; -+ - if (b44_version_printed++ == 0) - printk(KERN_INFO "%s", version); - -- err = pci_enable_device(pdev); -- if (err) { -- dev_err(&pdev->dev, "Cannot enable PCI device, " -- "aborting.\n"); -- return err; -- } -- -- if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { -- dev_err(&pdev->dev, -- "Cannot find proper PCI device " -- "base address, aborting.\n"); -- err = -ENODEV; -- goto err_out_disable_pdev; -- } -- -- err = pci_request_regions(pdev, DRV_MODULE_NAME); -- if (err) { -- dev_err(&pdev->dev, -- "Cannot obtain PCI resources, aborting.\n"); -- goto err_out_disable_pdev; -- } -- -- pci_set_master(pdev); -- -- err = pci_set_dma_mask(pdev, (u64) DMA_30BIT_MASK); -- if (err) { -- dev_err(&pdev->dev, "No usable DMA configuration, aborting.\n"); -- goto err_out_free_res; -- } -- -- err = pci_set_consistent_dma_mask(pdev, (u64) DMA_30BIT_MASK); -- if (err) { -- dev_err(&pdev->dev, "No usable DMA configuration, aborting.\n"); -- goto err_out_free_res; -- } -- -- b44reg_base = pci_resource_start(pdev, 0); -- b44reg_len = pci_resource_len(pdev, 0); -- - dev = alloc_etherdev(sizeof(*bp)); - if (!dev) { -- dev_err(&pdev->dev, "Etherdev alloc failed, aborting.\n"); -+ dev_err(&sdev->dev, "Etherdev alloc failed, aborting.\n"); - err = -ENOMEM; -- goto err_out_free_res; -+ goto out; - } - - SET_MODULE_OWNER(dev); -- SET_NETDEV_DEV(dev,&pdev->dev); -+ SET_NETDEV_DEV(dev,&sdev->dev); - - /* No interesting netdevice features in this card... */ - dev->features |= 0; - - bp = netdev_priv(dev); -- bp->pdev = pdev; -+ bp->sdev = sdev; - bp->dev = dev; - - bp->msg_enable = netif_msg_init(b44_debug, B44_DEF_MSG_ENABLE); - - spin_lock_init(&bp->lock); - -- bp->regs = ioremap(b44reg_base, b44reg_len); -- if (bp->regs == 0UL) { -- dev_err(&pdev->dev, "Cannot map device registers, aborting.\n"); -- err = -ENOMEM; -- goto err_out_free_dev; -- } -- - bp->rx_pending = B44_DEF_RX_RING_PENDING; - bp->tx_pending = B44_DEF_TX_RING_PENDING; - -@@ -2211,16 +2351,16 @@ - dev->poll_controller = b44_poll_controller; - #endif - dev->change_mtu = b44_change_mtu; -- dev->irq = pdev->irq; -+ dev->irq = sdev->irq; - SET_ETHTOOL_OPS(dev, &b44_ethtool_ops); - - netif_carrier_off(dev); - - err = b44_get_invariants(bp); - if (err) { -- dev_err(&pdev->dev, -+ dev_err(&sdev->dev, - "Problem fetching invariants of chip, aborting.\n"); -- goto err_out_iounmap; -+ goto err_out_free_dev; - } - - bp->mii_if.dev = dev; -@@ -2239,61 +2379,52 @@ - - err = register_netdev(dev); - if (err) { -- dev_err(&pdev->dev, "Cannot register net device, aborting.\n"); -- goto err_out_iounmap; -+ dev_err(&sdev->dev, "Cannot register net device, aborting.\n"); -+ goto out; - } - -- pci_set_drvdata(pdev, dev); -- -- pci_save_state(bp->pdev); -+ ssb_set_drvdata(sdev, dev); - - /* Chip reset provides power to the b44 MAC & PCI cores, which - * is necessary for MAC register access. - */ - b44_chip_reset(bp); - -- printk(KERN_INFO "%s: Broadcom 4400 10/100BaseT Ethernet ", dev->name); -+ printk(KERN_INFO "%s: Broadcom 10/100BaseT Ethernet ", dev->name); - for (i = 0; i < 6; i++) - printk("%2.2x%c", dev->dev_addr[i], - i == 5 ? '\n' : ':'); - -- return 0; -+ /* Initialize phy */ -+ spin_lock_irq(&bp->lock); -+ b44_chip_reset(bp); -+ spin_unlock_irq(&bp->lock); - --err_out_iounmap: -- iounmap(bp->regs); -+ return 0; - - err_out_free_dev: - free_netdev(dev); - --err_out_free_res: -- pci_release_regions(pdev); -- --err_out_disable_pdev: -- pci_disable_device(pdev); -- pci_set_drvdata(pdev, NULL); -+out: - return err; - } - --static void __devexit b44_remove_one(struct pci_dev *pdev) -+static void __devexit b44_remove_one(struct ssb_device *pdev) - { -- struct net_device *dev = pci_get_drvdata(pdev); -- struct b44 *bp = netdev_priv(dev); -+ struct net_device *dev = ssb_get_drvdata(pdev); - - unregister_netdev(dev); -- iounmap(bp->regs); - free_netdev(dev); -- pci_release_regions(pdev); -- pci_disable_device(pdev); -- pci_set_drvdata(pdev, NULL); -+ ssb_set_drvdata(pdev, NULL); - } - --static int b44_suspend(struct pci_dev *pdev, pm_message_t state) -+static int b44_suspend(struct ssb_device *pdev, pm_message_t state) - { -- struct net_device *dev = pci_get_drvdata(pdev); -+ struct net_device *dev = ssb_get_drvdata(pdev); - struct b44 *bp = netdev_priv(dev); - - if (!netif_running(dev)) -- return 0; -+ return 0; - - del_timer_sync(&bp->timer); - -@@ -2311,26 +2442,16 @@ - b44_init_hw(bp, B44_PARTIAL_RESET); - b44_setup_wol(bp); - } -- pci_disable_device(pdev); -+ - return 0; - } - --static int b44_resume(struct pci_dev *pdev) -+static int b44_resume(struct ssb_device *pdev) - { -- struct net_device *dev = pci_get_drvdata(pdev); -+ struct net_device *dev = ssb_get_drvdata(pdev); - struct b44 *bp = netdev_priv(dev); - int rc = 0; - -- pci_restore_state(pdev); -- rc = pci_enable_device(pdev); -- if (rc) { -- printk(KERN_ERR PFX "%s: pci_enable_device failed\n", -- dev->name); -- return rc; -- } -- -- pci_set_master(pdev); -- - if (!netif_running(dev)) - return 0; - -@@ -2356,29 +2477,31 @@ - return 0; - } - --static struct pci_driver b44_driver = { -+static struct ssb_driver b44_driver = { - .name = DRV_MODULE_NAME, -- .id_table = b44_pci_tbl, -+ .id_table = b44_ssb_tbl, - .probe = b44_init_one, - .remove = __devexit_p(b44_remove_one), -- .suspend = b44_suspend, -- .resume = b44_resume, -+ .suspend = b44_suspend, -+ .resume = b44_resume, - }; - - static int __init b44_init(void) - { - unsigned int dma_desc_align_size = dma_get_cache_alignment(); - -+ instance = 0; -+ - /* Setup paramaters for syncing RX/TX DMA descriptors */ - dma_desc_align_mask = ~(dma_desc_align_size - 1); - dma_desc_sync_size = max_t(unsigned int, dma_desc_align_size, sizeof(struct dma_desc)); - -- return pci_register_driver(&b44_driver); -+ return ssb_driver_register(&b44_driver); - } - - static void __exit b44_cleanup(void) - { -- pci_unregister_driver(&b44_driver); -+ ssb_driver_unregister(&b44_driver); - } - - module_init(b44_init); -diff -urN linux.old/drivers/net/b44.h linux.dev/drivers/net/b44.h ---- linux.old/drivers/net/b44.h 2006-12-11 20:32:53.000000000 +0100 -+++ linux.dev/drivers/net/b44.h 2007-01-03 02:26:02.000000000 +0100 -@@ -129,6 +129,7 @@ - #define RXCONFIG_FLOW 0x00000020 /* Flow Control Enable */ - #define RXCONFIG_FLOW_ACCEPT 0x00000040 /* Accept Unicast Flow Control Frame */ - #define RXCONFIG_RFILT 0x00000080 /* Reject Filter */ -+#define RXCONFIG_CAM_ABSENT 0x00000100 /* CAM Absent */ - #define B44_RXMAXLEN 0x0404UL /* EMAC RX Max Packet Length */ - #define B44_TXMAXLEN 0x0408UL /* EMAC TX Max Packet Length */ - #define B44_MDIO_CTRL 0x0410UL /* EMAC MDIO Control */ -@@ -227,75 +228,9 @@ - #define B44_RX_PAUSE 0x05D4UL /* MIB RX Pause Packets */ - #define B44_RX_NPAUSE 0x05D8UL /* MIB RX Non-Pause Packets */ - --/* Silicon backplane register definitions */ --#define B44_SBIMSTATE 0x0F90UL /* SB Initiator Agent State */ --#define SBIMSTATE_PC 0x0000000f /* Pipe Count */ --#define SBIMSTATE_AP_MASK 0x00000030 /* Arbitration Priority */ --#define SBIMSTATE_AP_BOTH 0x00000000 /* Use both timeslices and token */ --#define SBIMSTATE_AP_TS 0x00000010 /* Use timeslices only */ --#define SBIMSTATE_AP_TK 0x00000020 /* Use token only */ --#define SBIMSTATE_AP_RSV 0x00000030 /* Reserved */ --#define SBIMSTATE_IBE 0x00020000 /* In Band Error */ --#define SBIMSTATE_TO 0x00040000 /* Timeout */ --#define B44_SBINTVEC 0x0F94UL /* SB Interrupt Mask */ --#define SBINTVEC_PCI 0x00000001 /* Enable interrupts for PCI */ --#define SBINTVEC_ENET0 0x00000002 /* Enable interrupts for enet 0 */ --#define SBINTVEC_ILINE20 0x00000004 /* Enable interrupts for iline20 */ --#define SBINTVEC_CODEC 0x00000008 /* Enable interrupts for v90 codec */ --#define SBINTVEC_USB 0x00000010 /* Enable interrupts for usb */ --#define SBINTVEC_EXTIF 0x00000020 /* Enable interrupts for external i/f */ --#define SBINTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */ --#define B44_SBTMSLOW 0x0F98UL /* SB Target State Low */ --#define SBTMSLOW_RESET 0x00000001 /* Reset */ --#define SBTMSLOW_REJECT 0x00000002 /* Reject */ --#define SBTMSLOW_CLOCK 0x00010000 /* Clock Enable */ --#define SBTMSLOW_FGC 0x00020000 /* Force Gated Clocks On */ --#define SBTMSLOW_PE 0x40000000 /* Power Management Enable */ --#define SBTMSLOW_BE 0x80000000 /* BIST Enable */ --#define B44_SBTMSHIGH 0x0F9CUL /* SB Target State High */ --#define SBTMSHIGH_SERR 0x00000001 /* S-error */ --#define SBTMSHIGH_INT 0x00000002 /* Interrupt */ --#define SBTMSHIGH_BUSY 0x00000004 /* Busy */ --#define SBTMSHIGH_GCR 0x20000000 /* Gated Clock Request */ --#define SBTMSHIGH_BISTF 0x40000000 /* BIST Failed */ --#define SBTMSHIGH_BISTD 0x80000000 /* BIST Done */ --#define B44_SBIDHIGH 0x0FFCUL /* SB Identification High */ --#define SBIDHIGH_RC_MASK 0x0000000f /* Revision Code */ --#define SBIDHIGH_CC_MASK 0x0000fff0 /* Core Code */ --#define SBIDHIGH_CC_SHIFT 4 --#define SBIDHIGH_VC_MASK 0xffff0000 /* Vendor Code */ --#define SBIDHIGH_VC_SHIFT 16 -- --/* SSB PCI config space registers. */ --#define SSB_PMCSR 0x44 --#define SSB_PE 0x100 --#define SSB_BAR0_WIN 0x80 --#define SSB_BAR1_WIN 0x84 --#define SSB_SPROM_CONTROL 0x88 --#define SSB_BAR1_CONTROL 0x8c -- --/* SSB core and host control registers. */ --#define SSB_CONTROL 0x0000UL --#define SSB_ARBCONTROL 0x0010UL --#define SSB_ISTAT 0x0020UL --#define SSB_IMASK 0x0024UL --#define SSB_MBOX 0x0028UL --#define SSB_BCAST_ADDR 0x0050UL --#define SSB_BCAST_DATA 0x0054UL --#define SSB_PCI_TRANS_0 0x0100UL --#define SSB_PCI_TRANS_1 0x0104UL --#define SSB_PCI_TRANS_2 0x0108UL --#define SSB_SPROM 0x0800UL -- --#define SSB_PCI_MEM 0x00000000 --#define SSB_PCI_IO 0x00000001 --#define SSB_PCI_CFG0 0x00000002 --#define SSB_PCI_CFG1 0x00000003 --#define SSB_PCI_PREF 0x00000004 --#define SSB_PCI_BURST 0x00000008 --#define SSB_PCI_MASK0 0xfc000000 --#define SSB_PCI_MASK1 0xfc000000 --#define SSB_PCI_MASK2 0xc0000000 -+#define br32(bp, REG) ssb_read32((bp)->sdev, (REG)) -+#define bw32(bp, REG, VAL) ssb_write32((bp)->sdev, (REG), (VAL)) -+#define atoi(str) simple_strtoul(((str != NULL) ? str : ""), NULL, 0) - - /* 4400 PHY registers */ - #define B44_MII_AUXCTRL 24 /* Auxiliary Control */ -@@ -346,10 +281,12 @@ - - struct ring_info { - struct sk_buff *skb; -- DECLARE_PCI_UNMAP_ADDR(mapping); -+ dma_addr_t mapping; - }; - - #define B44_MCAST_TABLE_SIZE 32 -+#define B44_PHY_ADDR_NO_PHY 30 -+#define B44_MDC_RATIO 5000000 - - #define B44_STAT_REG_DECLARE \ - _B44(tx_good_octets) \ -@@ -425,9 +362,10 @@ - - u32 dma_offset; - u32 flags; --#define B44_FLAG_B0_ANDLATER 0x00000001 -+#define B44_FLAG_INIT_COMPLETE 0x00000001 - #define B44_FLAG_BUGGY_TXPTR 0x00000002 - #define B44_FLAG_REORDER_BUG 0x00000004 -+#define B44_FLAG_B0_ANDLATER 0x00000008 - #define B44_FLAG_PAUSE_AUTO 0x00008000 - #define B44_FLAG_FULL_DUPLEX 0x00010000 - #define B44_FLAG_100_BASE_T 0x00020000 -@@ -452,8 +390,7 @@ - struct net_device_stats stats; - struct b44_hw_stats hw_stats; - -- void __iomem *regs; -- struct pci_dev *pdev; -+ struct ssb_device *sdev; - struct net_device *dev; - - dma_addr_t rx_ring_dma, tx_ring_dma; -diff -urN linux.old/drivers/net/Kconfig linux.dev/drivers/net/Kconfig ---- linux.old/drivers/net/Kconfig 2007-01-03 02:25:09.000000000 +0100 -+++ linux.dev/drivers/net/Kconfig 2007-01-03 02:26:02.000000000 +0100 -@@ -1511,7 +1511,7 @@ - - config B44 - tristate "Broadcom 4400 ethernet support" -- depends on NET_PCI && PCI -+ depends on SSB && EXPERIMENTAL - select MII - help - If you have a network (Ethernet) controller of this type, say Y and - diff --git a/target/linux/brcm47xx-2.6/patches/130-remove_scache.patch b/target/linux/brcm47xx-2.6/patches/130-remove_scache.patch deleted file mode 100644 index 1f3b250c4..000000000 --- a/target/linux/brcm47xx-2.6/patches/130-remove_scache.patch +++ /dev/null @@ -1,91 +0,0 @@ -diff -urN linux-2.6.19.ref/arch/mips/Kconfig linux-2.6.19/arch/mips/Kconfig ---- linux-2.6.19.ref/arch/mips/Kconfig 2006-12-04 21:33:48.000000000 +0100 -+++ linux-2.6.19/arch/mips/Kconfig 2006-12-04 21:34:04.000000000 +0100 -@@ -315,7 +315,6 @@ - select I8259 - select MIPS_BOARDS_GEN - select MIPS_BONITO64 -- select MIPS_CPU_SCACHE - select MIPS_GT64120 - select MIPS_MSC - select SWAP_IO_SPACE -@@ -1538,13 +1537,6 @@ - bool - select BOARD_SCACHE - --# --# Support for a MIPS32 / MIPS64 style S-caches --# --config MIPS_CPU_SCACHE -- bool -- select BOARD_SCACHE -- - config R5000_CPU_SCACHE - bool - select BOARD_SCACHE -diff -urN linux-2.6.19.ref/arch/mips/kernel/cpu-probe.c linux-2.6.19/arch/mips/kernel/cpu-probe.c ---- linux-2.6.19.ref/arch/mips/kernel/cpu-probe.c 2006-12-04 21:33:48.000000000 +0100 -+++ linux-2.6.19/arch/mips/kernel/cpu-probe.c 2006-12-04 21:34:04.000000000 +0100 -@@ -619,6 +619,8 @@ - break; - case PRID_IMP_25KF: - c->cputype = CPU_25KF; -+ /* Probe for L2 cache */ -+ c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT; - break; - case PRID_IMP_34K: - c->cputype = CPU_34K; -diff -urN linux-2.6.19.ref/arch/mips/mm/c-r4k.c linux-2.6.19/arch/mips/mm/c-r4k.c ---- linux-2.6.19.ref/arch/mips/mm/c-r4k.c 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19/arch/mips/mm/c-r4k.c 2006-12-04 21:34:04.000000000 +0100 -@@ -1038,7 +1038,6 @@ - - extern int r5k_sc_init(void); - extern int rm7k_sc_init(void); --extern int mips_sc_init(void); - - static void __init setup_scache(void) - { -@@ -1086,29 +1085,17 @@ - return; - - default: -- if (c->isa_level == MIPS_CPU_ISA_M32R1 || -- c->isa_level == MIPS_CPU_ISA_M32R2 || -- c->isa_level == MIPS_CPU_ISA_M64R1 || -- c->isa_level == MIPS_CPU_ISA_M64R2) { --#ifdef CONFIG_MIPS_CPU_SCACHE -- if (mips_sc_init ()) { -- scache_size = c->scache.ways * c->scache.sets * c->scache.linesz; -- printk("MIPS secondary cache %ldkB, %s, linesize %d bytes.\n", -- scache_size >> 10, -- way_string[c->scache.ways], c->scache.linesz); -- } --#else -- if (!(c->scache.flags & MIPS_CACHE_NOT_PRESENT)) -- panic("Dunno how to handle MIPS32 / MIPS64 second level cache"); --#endif -- return; -- } - sc_present = 0; - } - - if (!sc_present) - return; - -+ if ((c->isa_level == MIPS_CPU_ISA_M32R1 || -+ c->isa_level == MIPS_CPU_ISA_M64R1) && -+ !(c->scache.flags & MIPS_CACHE_NOT_PRESENT)) -+ panic("Dunno how to handle MIPS32 / MIPS64 second level cache"); -+ - /* compute a couple of other cache variables */ - c->scache.waysize = scache_size / c->scache.ways; - -diff -urN linux-2.6.19.ref/arch/mips/mm/Makefile linux-2.6.19/arch/mips/mm/Makefile ---- linux-2.6.19.ref/arch/mips/mm/Makefile 2006-11-29 22:57:37.000000000 +0100 -+++ linux-2.6.19/arch/mips/mm/Makefile 2006-12-04 21:34:04.000000000 +0100 -@@ -30,4 +30,3 @@ - obj-$(CONFIG_IP22_CPU_SCACHE) += sc-ip22.o - obj-$(CONFIG_R5000_CPU_SCACHE) += sc-r5k.o - obj-$(CONFIG_RM7000_CPU_SCACHE) += sc-rm7k.o --obj-$(CONFIG_MIPS_CPU_SCACHE) += sc-mips.o diff --git a/target/linux/brcm47xx-2.6/patches/150-cpu_fixes.patch b/target/linux/brcm47xx-2.6/patches/150-cpu_fixes.patch deleted file mode 100644 index 834c7ee76..000000000 --- a/target/linux/brcm47xx-2.6/patches/150-cpu_fixes.patch +++ /dev/null @@ -1,338 +0,0 @@ -diff -ur linux.old/arch/mips/kernel/genex.S linux.dev/arch/mips/kernel/genex.S ---- linux.old/arch/mips/kernel/genex.S 2007-03-23 16:10:35.572499592 +0100 -+++ linux.dev/arch/mips/kernel/genex.S 2007-03-16 11:54:34.901251992 +0100 -@@ -51,6 +51,10 @@ - NESTED(except_vec3_generic, 0, sp) - .set push - .set noat -+#ifdef CONFIG_BCM947XX -+ nop -+ nop -+#endif - #if R5432_CP0_INTERRUPT_WAR - mfc0 k0, CP0_INDEX - #endif -diff -ur linux.old/arch/mips/mm/c-r4k.c linux.dev/arch/mips/mm/c-r4k.c ---- linux.old/arch/mips/mm/c-r4k.c 2007-03-16 12:11:00.344441000 +0100 -+++ linux.dev/arch/mips/mm/c-r4k.c 2007-03-23 16:03:23.596169976 +0100 -@@ -29,6 +29,9 @@ - #include <asm/cacheflush.h> /* for run_uncached() */ - - -+/* For enabling BCM4710 cache workarounds */ -+int bcm4710 = 0; -+ - /* - * Special Variant of smp_call_function for use by cache functions: - * -@@ -93,6 +96,9 @@ - { - unsigned long dc_lsize = cpu_dcache_line_size(); - -+ if (bcm4710) -+ r4k_blast_dcache_page = blast_dcache_page; -+ else - if (dc_lsize == 0) - r4k_blast_dcache_page = (void *)cache_noop; - else if (dc_lsize == 16) -@@ -107,6 +113,9 @@ - { - unsigned long dc_lsize = cpu_dcache_line_size(); - -+ if (bcm4710) -+ r4k_blast_dcache_page_indexed = blast_dcache_page_indexed; -+ else - if (dc_lsize == 0) - r4k_blast_dcache_page_indexed = (void *)cache_noop; - else if (dc_lsize == 16) -@@ -121,6 +130,9 @@ - { - unsigned long dc_lsize = cpu_dcache_line_size(); - -+ if (bcm4710) -+ r4k_blast_dcache = blast_dcache; -+ else - if (dc_lsize == 0) - r4k_blast_dcache = (void *)cache_noop; - else if (dc_lsize == 16) -@@ -538,6 +550,9 @@ - r4k_blast_icache(); - else - protected_blast_icache_range(start, end); -+ -+ if (bcm4710) -+ r4k_flush_cache_all(); - } - - static void r4k_flush_icache_range(unsigned long start, unsigned long end) -@@ -618,6 +633,8 @@ - unsigned long addr = (unsigned long) arg; - - R4600_HIT_CACHEOP_WAR_IMPL; -+ BCM4710_PROTECTED_FILL_TLB(addr); -+ BCM4710_PROTECTED_FILL_TLB(addr + 4); - if (dc_lsize) - protected_writeback_dcache_line(addr & ~(dc_lsize - 1)); - if (!cpu_icache_snoops_remote_store && scache_size) -@@ -1173,6 +1190,15 @@ - - /* Default cache error handler for R4000 and R5000 family */ - set_uncached_handler (0x100, &except_vec2_generic, 0x80); -+ -+ /* Check if special workarounds are required */ -+#ifdef CONFIG_BCM947XX -+ if (current_cpu_data.cputype == CPU_BCM4710 && (current_cpu_data.processor_id & 0xff) == 0) { -+ printk("Enabling BCM4710A0 cache workarounds.\n"); -+ bcm4710 = 1; -+ } else -+#endif -+ bcm4710 = 0; - - probe_pcache(); - setup_scache(); -diff -ur linux.old/arch/mips/mm/tlbex.c linux.dev/arch/mips/mm/tlbex.c ---- linux.old/arch/mips/mm/tlbex.c 2007-03-16 11:54:34.826263000 +0100 -+++ linux.dev/arch/mips/mm/tlbex.c 2007-03-23 16:03:23.608168152 +0100 -@@ -1229,6 +1229,10 @@ - #endif - } - -+#ifdef CONFIG_BCM947XX -+extern int bcm4710; -+#endif -+ - static void __init build_r4000_tlb_refill_handler(void) - { - u32 *p = tlb_handler; -@@ -1243,6 +1247,12 @@ - memset(relocs, 0, sizeof(relocs)); - memset(final_handler, 0, sizeof(final_handler)); - -+#ifdef CONFIG_BCM947XX -+ if (bcm4710) { -+ i_nop(&p); -+ } -+#endif -+ - /* - * create the plain linear handler - */ -diff -ur linux.old/include/asm-mips/r4kcache.h linux.dev/include/asm-mips/r4kcache.h ---- linux.old/include/asm-mips/r4kcache.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux.dev/include/asm-mips/r4kcache.h 2007-03-23 16:38:44.603727816 +0100 -@@ -17,6 +17,20 @@ - #include <asm/cpu-features.h> - #include <asm/mipsmtregs.h> - -+#ifdef CONFIG_BCM947XX -+#include <asm/paccess.h> -+#include <linux/ssb/ssb.h> -+#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE + SSB_IMSTATE))) -+ -+#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr)) -+#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); }) -+#else -+#define BCM4710_DUMMY_RREG() -+ -+#define BCM4710_FILL_TLB(addr) -+#define BCM4710_PROTECTED_FILL_TLB(addr) -+#endif -+ - /* - * This macro return a properly sign-extended address suitable as base address - * for indexed cache operations. Two issues here: -@@ -150,6 +164,7 @@ - static inline void flush_dcache_line_indexed(unsigned long addr) - { - __dflush_prologue -+ BCM4710_DUMMY_RREG(); - cache_op(Index_Writeback_Inv_D, addr); - __dflush_epilogue - } -@@ -169,6 +184,7 @@ - static inline void flush_dcache_line(unsigned long addr) - { - __dflush_prologue -+ BCM4710_DUMMY_RREG(); - cache_op(Hit_Writeback_Inv_D, addr); - __dflush_epilogue - } -@@ -176,6 +192,7 @@ - static inline void invalidate_dcache_line(unsigned long addr) - { - __dflush_prologue -+ BCM4710_DUMMY_RREG(); - cache_op(Hit_Invalidate_D, addr); - __dflush_epilogue - } -@@ -208,6 +225,7 @@ - */ - static inline void protected_flush_icache_line(unsigned long addr) - { -+ BCM4710_DUMMY_RREG(); - protected_cache_op(Hit_Invalidate_I, addr); - } - -@@ -219,6 +237,7 @@ - */ - static inline void protected_writeback_dcache_line(unsigned long addr) - { -+ BCM4710_DUMMY_RREG(); - protected_cache_op(Hit_Writeback_Inv_D, addr); - } - -@@ -339,8 +358,52 @@ - : "r" (base), \ - "i" (op)); - -+static inline void blast_dcache(void) -+{ -+ unsigned long start = KSEG0; -+ unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways; -+ unsigned long end = (start + dcache_size); -+ -+ do { -+ BCM4710_DUMMY_RREG(); -+ cache_op(Index_Writeback_Inv_D, start); -+ start += current_cpu_data.dcache.linesz; -+ } while(start < end); -+} -+ -+static inline void blast_dcache_page(unsigned long page) -+{ -+ unsigned long start = page; -+ unsigned long end = start + PAGE_SIZE; -+ -+ BCM4710_FILL_TLB(start); -+ do { -+ BCM4710_DUMMY_RREG(); -+ cache_op(Hit_Writeback_Inv_D, start); -+ start += current_cpu_data.dcache.linesz; -+ } while(start < end); -+} -+ -+static inline void blast_dcache_page_indexed(unsigned long page) -+{ -+ unsigned long start = page; -+ unsigned long end = start + PAGE_SIZE; -+ unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit; -+ unsigned long ws_end = current_cpu_data.dcache.ways << -+ current_cpu_data.dcache.waybit; -+ unsigned long ws, addr; -+ for (ws = 0; ws < ws_end; ws += ws_inc) { -+ start = page + ws; -+ for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) { -+ BCM4710_DUMMY_RREG(); -+ cache_op(Index_Writeback_Inv_D, addr); -+ } -+ } -+} -+ -+ - /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */ --#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize) \ -+#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, war) \ - static inline void blast_##pfx##cache##lsize(void) \ - { \ - unsigned long start = INDEX_BASE; \ -@@ -352,6 +415,7 @@ - \ - __##pfx##flush_prologue \ - \ -+ war \ - for (ws = 0; ws < ws_end; ws += ws_inc) \ - for (addr = start; addr < end; addr += lsize * 32) \ - cache##lsize##_unroll32(addr|ws,indexop); \ -@@ -366,6 +430,7 @@ - \ - __##pfx##flush_prologue \ - \ -+ war \ - do { \ - cache##lsize##_unroll32(start,hitop); \ - start += lsize * 32; \ -@@ -384,6 +449,8 @@ - current_cpu_data.desc.waybit; \ - unsigned long ws, addr; \ - \ -+ war \ -+ \ - __##pfx##flush_prologue \ - \ - for (ws = 0; ws < ws_end; ws += ws_inc) \ -@@ -393,28 +460,30 @@ - __##pfx##flush_epilogue \ - } - --__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16) --__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16) --__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16) --__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32) --__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32) --__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32) --__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64) --__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64) --__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128) -+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, ) -+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, BCM4710_FILL_TLB(start);) -+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, ) -+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, ) -+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, BCM4710_FILL_TLB(start);) -+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, ) -+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, BCM4710_FILL_TLB(start);) -+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, ) -+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, ) - - /* build blast_xxx_range, protected_blast_xxx_range */ --#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \ -+#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, war, war2) \ - static inline void prot##blast_##pfx##cache##_range(unsigned long start, \ - unsigned long end) \ - { \ - unsigned long lsize = cpu_##desc##_line_size(); \ - unsigned long addr = start & ~(lsize - 1); \ - unsigned long aend = (end - 1) & ~(lsize - 1); \ -+ war \ - \ - __##pfx##flush_prologue \ - \ - while (1) { \ -+ war2 \ - prot##cache_op(hitop, addr); \ - if (addr == aend) \ - break; \ -@@ -424,13 +493,13 @@ - __##pfx##flush_epilogue \ - } - --__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_) --__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_) --__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_) --__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, ) --__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, ) -+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();) -+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_,, ) -+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_,, ) -+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D,, BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();) -+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD,,, ) - /* blast_inv_dcache_range */ --__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, ) --__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, ) -+__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D,,,BCM4710_DUMMY_RREG();) -+__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD,,, ) - - #endif /* _ASM_R4KCACHE_H */ -diff -ur linux.old/include/asm-mips/stackframe.h linux.dev/include/asm-mips/stackframe.h ---- linux.old/include/asm-mips/stackframe.h 2007-03-23 16:10:35.573499440 +0100 -+++ linux.dev/include/asm-mips/stackframe.h 2007-03-16 11:54:34.903251688 +0100 -@@ -352,6 +352,10 @@ - .macro RESTORE_SP_AND_RET - LONG_L sp, PT_R29(sp) - .set mips3 -+#ifdef CONFIG_BCM947XX -+ nop -+ nop -+#endif - eret - .set mips0 - .endm diff --git a/target/linux/brcm47xx-2.6/patches/160-kmap_coherent.patch b/target/linux/brcm47xx-2.6/patches/160-kmap_coherent.patch deleted file mode 100644 index 706a20f83..000000000 --- a/target/linux/brcm47xx-2.6/patches/160-kmap_coherent.patch +++ /dev/null @@ -1,57 +0,0 @@ ---- ./arch/mips/mm/init.c.orig 2007-03-22 08:08:34.000000000 -0600 -+++ ./arch/mips/mm/init.c 2007-03-22 08:09:04.000000000 -0600 -@@ -207,7 +207,7 @@ - void *vfrom, *vto; - - vto = kmap_atomic(to, KM_USER1); -- if (cpu_has_dc_aliases) { -+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent) { - vfrom = kmap_coherent(from, vaddr); - copy_page(vto, vfrom); - kunmap_coherent(from); -@@ -230,7 +230,7 @@ - struct page *page, unsigned long vaddr, void *dst, const void *src, - unsigned long len) - { -- if (cpu_has_dc_aliases) { -+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent) { - void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK); - memcpy(vto, src, len); - kunmap_coherent(page); -@@ -246,7 +246,7 @@ - struct page *page, unsigned long vaddr, void *dst, const void *src, - unsigned long len) - { -- if (cpu_has_dc_aliases) { -+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent) { - void *vfrom = - kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK); - memcpy(dst, vfrom, len); ---- ./include/asm-mips/mach-bcm947xx/cpu-feature-overrides.h.orig 2007-03-22 08:10:54.000000000 -0600 -+++ ./include/asm-mips/mach-bcm947xx/cpu-feature-overrides.h 2007-03-22 08:10:50.000000000 -0600 -@@ -0,0 +1,13 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) -+ */ -+#ifndef __ASM_MACH_BCM947XX_CPU_FEATURE_OVERRIDES_H -+#define __ASM_MACH_BCM947XX_CPU_FEATURE_OVERRIDES_H -+ -+#define cpu_use_kmap_coherent 0 -+ -+#endif /* __ASM_MACH_BCM947XX_CPU_FEATURE_OVERRIDES_H */ ---- ./include/asm-mips/cpu-features.h.orig 2007-03-22 08:09:16.000000000 -0600 -+++ ./include/asm-mips/cpu-features.h 2007-03-22 08:09:52.000000000 -0600 -@@ -101,6 +101,9 @@ - #ifndef cpu_has_pindexed_dcache - #define cpu_has_pindexed_dcache (cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX) - #endif -+#ifndef cpu_use_kmap_coherent -+#define cpu_use_kmap_coherent 1 -+#endif - - /* - * I-Cache snoops remote store. This only matters on SMP. Some multiprocessors diff --git a/target/linux/brcm47xx-2.6/patches/170-cpu_wait.patch b/target/linux/brcm47xx-2.6/patches/170-cpu_wait.patch deleted file mode 100644 index ce37b1343..000000000 --- a/target/linux/brcm47xx-2.6/patches/170-cpu_wait.patch +++ /dev/null @@ -1,12 +0,0 @@ -diff -urN linux-2.6.19.2.old/arch/mips/kernel/cpu-probe.c linux-2.6.19.2/arch/mips/kernel/cpu-probe.c ---- linux-2.6.19.2.old/arch/mips/kernel/cpu-probe.c 2007-05-01 19:28:06.937756121 +0100 -+++ linux-2.6.19.2/arch/mips/kernel/cpu-probe.c 2007-05-01 19:31:46.867756121 +0100 -@@ -143,6 +143,8 @@ - case CPU_34K: - case CPU_74K: - case CPU_PR4450: -+ case CPU_BCM3302: -+ case CPU_BCM4710: - cpu_wait = r4k_wait; - break; - case CPU_TX49XX: diff --git a/target/linux/brcm47xx-2.6/patches/200-b44_ssb_fixup.patch b/target/linux/brcm47xx-2.6/patches/200-b44_ssb_fixup.patch deleted file mode 100644 index 816d7e18b..000000000 --- a/target/linux/brcm47xx-2.6/patches/200-b44_ssb_fixup.patch +++ /dev/null @@ -1,256 +0,0 @@ -Index: linux-2.6.22-rc4/drivers/net/b44.c -=================================================================== ---- linux-2.6.22-rc4.orig/drivers/net/b44.c 2007-06-10 21:33:15.000000000 +0100 -+++ linux-2.6.22-rc4/drivers/net/b44.c 2007-06-10 21:33:23.000000000 +0100 -@@ -128,7 +128,7 @@ - unsigned long offset, - enum dma_data_direction dir) - { -- dma_sync_single_range_for_device(&sdev->dev, dma_base, -+ dma_sync_single_range_for_device(sdev->dev, dma_base, - offset & dma_desc_align_mask, - dma_desc_sync_size, dir); - } -@@ -138,7 +138,7 @@ - unsigned long offset, - enum dma_data_direction dir) - { -- dma_sync_single_range_for_cpu(&sdev->dev, dma_base, -+ dma_sync_single_range_for_cpu(sdev->dev, dma_base, - offset & dma_desc_align_mask, - dma_desc_sync_size, dir); - } -@@ -563,7 +563,7 @@ - - BUG_ON(skb == NULL); - -- dma_unmap_single(&bp->sdev->dev, -+ dma_unmap_single(bp->sdev->dev, - pci_unmap_addr(rp, mapping), - skb->len, - DMA_TO_DEVICE); -@@ -603,7 +603,7 @@ - if (skb == NULL) - return -ENOMEM; - -- mapping = dma_map_single(&bp->sdev->dev, skb->data, -+ mapping = dma_map_single(bp->sdev->dev, skb->data, - RX_PKT_BUF_SZ, - DMA_FROM_DEVICE); - -@@ -613,18 +613,18 @@ - mapping + RX_PKT_BUF_SZ > DMA_30BIT_MASK) { - /* Sigh... */ - if (!dma_mapping_error(mapping)) -- dma_unmap_single(&bp->sdev->dev, mapping, RX_PKT_BUF_SZ,DMA_FROM_DEVICE); -+ dma_unmap_single(bp->sdev->dev, mapping, RX_PKT_BUF_SZ,DMA_FROM_DEVICE); - dev_kfree_skb_any(skb); - skb = __dev_alloc_skb(RX_PKT_BUF_SZ,GFP_DMA); - if (skb == NULL) - return -ENOMEM; -- mapping = dma_map_single(&bp->sdev->dev, skb->data, -+ mapping = dma_map_single(bp->sdev->dev, skb->data, - RX_PKT_BUF_SZ, - DMA_FROM_DEVICE); - if (dma_mapping_error(mapping) || - mapping + RX_PKT_BUF_SZ > DMA_30BIT_MASK) { - if (!dma_mapping_error(mapping)) -- dma_unmap_single(&bp->sdev->dev, mapping, RX_PKT_BUF_SZ,DMA_FROM_DEVICE); -+ dma_unmap_single(bp->sdev->dev, mapping, RX_PKT_BUF_SZ,DMA_FROM_DEVICE); - dev_kfree_skb_any(skb); - return -ENOMEM; - } -@@ -702,7 +702,7 @@ - dest_idx * sizeof(dest_desc), - DMA_BIDIRECTIONAL); - -- dma_sync_single_for_device(&bp->sdev->dev, le32_to_cpu(src_desc->addr), -+ dma_sync_single_for_device(bp->sdev->dev, le32_to_cpu(src_desc->addr), - RX_PKT_BUF_SZ, - DMA_FROM_DEVICE); - } -@@ -724,7 +724,7 @@ - struct rx_header *rh; - u16 len; - -- dma_sync_single_for_cpu(&bp->sdev->dev, map, -+ dma_sync_single_for_cpu(bp->sdev->dev, map, - RX_PKT_BUF_SZ, - DMA_FROM_DEVICE); - rh = (struct rx_header *) skb->data; -@@ -758,7 +758,7 @@ - skb_size = b44_alloc_rx_skb(bp, cons, bp->rx_prod); - if (skb_size < 0) - goto drop_it; -- dma_unmap_single(&bp->sdev->dev, map, -+ dma_unmap_single(bp->sdev->dev, map, - skb_size, DMA_FROM_DEVICE); - /* Leave out rx_header */ - skb_put(skb, len+bp->rx_offset); -@@ -931,22 +931,22 @@ - goto err_out; - } - -- mapping = dma_map_single(&bp->sdev->dev, skb->data, len, DMA_TO_DEVICE); -+ mapping = dma_map_single(bp->sdev->dev, skb->data, len, DMA_TO_DEVICE); - if (dma_mapping_error(mapping) || mapping + len > DMA_30BIT_MASK) { - /* Chip can't handle DMA to/from >1GB, use bounce buffer */ - if (!dma_mapping_error(mapping)) -- dma_unmap_single(&bp->sdev->dev, mapping, len, DMA_TO_DEVICE); -+ dma_unmap_single(bp->sdev->dev, mapping, len, DMA_TO_DEVICE); - - bounce_skb = __dev_alloc_skb(TX_PKT_BUF_SZ, - GFP_ATOMIC|GFP_DMA); - if (!bounce_skb) - goto err_out; - -- mapping = dma_map_single(&bp->sdev->dev, bounce_skb->data, -+ mapping = dma_map_single(bp->sdev->dev, bounce_skb->data, - len, DMA_TO_DEVICE); - if (dma_mapping_error(mapping) || mapping + len > DMA_30BIT_MASK) { - if (!dma_mapping_error(mapping)) -- dma_unmap_single(&bp->sdev->dev, mapping, -+ dma_unmap_single(bp->sdev->dev, mapping, - len, DMA_TO_DEVICE); - dev_kfree_skb_any(bounce_skb); - goto err_out; -@@ -1046,7 +1046,7 @@ - - if (rp->skb == NULL) - continue; -- dma_unmap_single(&bp->sdev->dev, -+ dma_unmap_single(bp->sdev->dev, - pci_unmap_addr(rp, mapping), - RX_PKT_BUF_SZ, - DMA_FROM_DEVICE); -@@ -1060,7 +1060,7 @@ - - if (rp->skb == NULL) - continue; -- dma_unmap_single(&bp->sdev->dev, -+ dma_unmap_single(bp->sdev->dev, - pci_unmap_addr(rp, mapping), - rp->skb->len, - DMA_TO_DEVICE); -@@ -1085,12 +1085,12 @@ - memset(bp->tx_ring, 0, B44_TX_RING_BYTES); - - if (bp->flags & B44_FLAG_RX_RING_HACK) -- dma_sync_single_for_device(&bp->sdev->dev, bp->rx_ring_dma, -+ dma_sync_single_for_device(bp->sdev->dev, bp->rx_ring_dma, - DMA_TABLE_BYTES, - DMA_BIDIRECTIONAL); - - if (bp->flags & B44_FLAG_TX_RING_HACK) -- dma_sync_single_for_device(&bp->sdev->dev, bp->tx_ring_dma, -+ dma_sync_single_for_device(bp->sdev->dev, bp->tx_ring_dma, - DMA_TABLE_BYTES, - DMA_TO_DEVICE); - -@@ -1112,24 +1112,24 @@ - bp->tx_buffers = NULL; - if (bp->rx_ring) { - if (bp->flags & B44_FLAG_RX_RING_HACK) { -- dma_unmap_single(&bp->sdev->dev, bp->rx_ring_dma, -+ dma_unmap_single(bp->sdev->dev, bp->rx_ring_dma, - DMA_TABLE_BYTES, - DMA_BIDIRECTIONAL); - kfree(bp->rx_ring); - } else -- dma_free_coherent(&bp->sdev->dev, DMA_TABLE_BYTES, -+ dma_free_coherent(bp->sdev->dev, DMA_TABLE_BYTES, - bp->rx_ring, bp->rx_ring_dma); - bp->rx_ring = NULL; - bp->flags &= ~B44_FLAG_RX_RING_HACK; - } - if (bp->tx_ring) { - if (bp->flags & B44_FLAG_TX_RING_HACK) { -- dma_unmap_single(&bp->sdev->dev, bp->tx_ring_dma, -+ dma_unmap_single(bp->sdev->dev, bp->tx_ring_dma, - DMA_TABLE_BYTES, - DMA_TO_DEVICE); - kfree(bp->tx_ring); - } else -- dma_free_coherent(&bp->sdev->dev, DMA_TABLE_BYTES, -+ dma_free_coherent(bp->sdev->dev, DMA_TABLE_BYTES, - bp->tx_ring, bp->tx_ring_dma); - bp->tx_ring = NULL; - bp->flags &= ~B44_FLAG_TX_RING_HACK; -@@ -1155,7 +1155,7 @@ - goto out_err; - - size = DMA_TABLE_BYTES; -- bp->rx_ring = dma_alloc_coherent(&bp->sdev->dev, size, &bp->rx_ring_dma, GFP_ATOMIC); -+ bp->rx_ring = dma_alloc_coherent(bp->sdev->dev, size, &bp->rx_ring_dma, GFP_ATOMIC); - if (!bp->rx_ring) { - /* Allocation may have failed due to pci_alloc_consistent - insisting on use of GFP_DMA, which is more restrictive -@@ -1167,7 +1167,7 @@ - if (!rx_ring) - goto out_err; - -- rx_ring_dma = dma_map_single(&bp->sdev->dev, rx_ring, -+ rx_ring_dma = dma_map_single(bp->sdev->dev, rx_ring, - DMA_TABLE_BYTES, - DMA_BIDIRECTIONAL); - -@@ -1182,7 +1182,7 @@ - bp->flags |= B44_FLAG_RX_RING_HACK; - } - -- bp->tx_ring = dma_alloc_coherent(&bp->sdev->dev, size, &bp->tx_ring_dma, GFP_ATOMIC); -+ bp->tx_ring = dma_alloc_coherent(bp->sdev->dev, size, &bp->tx_ring_dma, GFP_ATOMIC); - if (!bp->tx_ring) { - /* Allocation may have failed due to dma_alloc_coherent - insisting on use of GFP_DMA, which is more restrictive -@@ -1194,7 +1194,7 @@ - if (!tx_ring) - goto out_err; - -- tx_ring_dma = dma_map_single(&bp->sdev->dev, tx_ring, -+ tx_ring_dma = dma_map_single(bp->sdev->dev, tx_ring, - DMA_TABLE_BYTES, - DMA_TO_DEVICE); - -@@ -2314,13 +2314,13 @@ - - dev = alloc_etherdev(sizeof(*bp)); - if (!dev) { -- dev_err(&sdev->dev, "Etherdev alloc failed, aborting.\n"); -+ dev_err(sdev->dev, "Etherdev alloc failed, aborting.\n"); - err = -ENOMEM; - goto out; - } - - SET_MODULE_OWNER(dev); -- SET_NETDEV_DEV(dev,&sdev->dev); -+ SET_NETDEV_DEV(dev,sdev->dev); - - /* No interesting netdevice features in this card... */ - dev->features |= 0; -@@ -2358,7 +2358,7 @@ - - err = b44_get_invariants(bp); - if (err) { -- dev_err(&sdev->dev, -+ dev_err(sdev->dev, - "Problem fetching invariants of chip, aborting.\n"); - goto err_out_free_dev; - } -@@ -2379,7 +2379,7 @@ - - err = register_netdev(dev); - if (err) { -- dev_err(&sdev->dev, "Cannot register net device, aborting.\n"); -+ dev_err(sdev->dev, "Cannot register net device, aborting.\n"); - goto out; - } - -@@ -2458,7 +2458,6 @@ - rc = request_irq(dev->irq, b44_interrupt, IRQF_SHARED, dev->name, dev); - if (rc) { - printk(KERN_ERR PFX "%s: request_irq failed\n", dev->name); -- pci_disable_device(pdev); - return rc; - } - diff --git a/target/linux/brcm47xx-2.6/patches/205-ssb_integrate.patch b/target/linux/brcm47xx-2.6/patches/205-ssb_integrate.patch deleted file mode 100644 index 67882454d..000000000 --- a/target/linux/brcm47xx-2.6/patches/205-ssb_integrate.patch +++ /dev/null @@ -1,78 +0,0 @@ -Index: linux-2.6.22-rc4/drivers/usb/host/Kconfig -=================================================================== ---- linux-2.6.22-rc4.orig/drivers/usb/host/Kconfig 2007-06-10 21:32:11.000000000 +0100 -+++ linux-2.6.22-rc4/drivers/usb/host/Kconfig 2007-06-10 21:33:24.000000000 +0100 -@@ -142,6 +142,19 @@ - Enables support for PCI-bus plug-in USB controller cards. - If unsure, say Y. - -+config USB_OHCI_HCD_SSB -+ bool "OHCI support for the Broadcom SSB OHCI core (embedded systems only)" -+ depends on USB_OHCI_HCD && ((USB_OHCI_HCD=m && SSB) || (USB_OHCI_HCD=y && SSB=y)) && EXPERIMENTAL -+ default n -+ ---help--- -+ Support for the Sonics Silicon Backplane (SSB) attached -+ Broadcom USB OHCI core. -+ -+ This device is only present in some embedded devices with -+ Broadcom based SSB bus. -+ -+ If unsure, say N. -+ - config USB_OHCI_BIG_ENDIAN_DESC - bool - depends on USB_OHCI_HCD -Index: linux-2.6.22-rc4/drivers/usb/host/ohci-hcd.c -=================================================================== ---- linux-2.6.22-rc4.orig/drivers/usb/host/ohci-hcd.c 2007-06-10 21:32:11.000000000 +0100 -+++ linux-2.6.22-rc4/drivers/usb/host/ohci-hcd.c 2007-06-10 21:33:24.000000000 +0100 -@@ -920,11 +920,17 @@ - #define PS3_SYSTEM_BUS_DRIVER ps3_ohci_sb_driver - #endif - -+#ifdef CONFIG_USB_OHCI_HCD_SSB -+#include "ohci-ssb.c" -+#define SSB_OHCI_DRIVER ssb_ohci_driver -+#endif -+ - #if !defined(PCI_DRIVER) && \ - !defined(PLATFORM_DRIVER) && \ - !defined(OF_PLATFORM_DRIVER) && \ - !defined(SA1111_DRIVER) && \ -- !defined(PS3_SYSTEM_BUS_DRIVER) -+ !defined(PS3_SYSTEM_BUS_DRIVER) && \ -+ !defined(SSB_OHCI_DRIVER) - #error "missing bus glue for ohci-hcd" - #endif - -@@ -972,10 +978,20 @@ - goto error_pci; - #endif - -+#ifdef SSB_OHCI_DRIVER -+ retval = ssb_driver_register(&SSB_OHCI_DRIVER); -+ if (retval) -+ goto error_ssb; -+#endif -+ - return retval; - - /* Error path */ -+#ifdef SSB_OHCI_DRIVER -+ error_ssb: -+#endif - #ifdef PCI_DRIVER -+ pci_unregister_driver(&PCI_DRIVER); - error_pci: - #endif - #ifdef SA1111_DRIVER -@@ -1001,6 +1017,9 @@ - - static void __exit ohci_hcd_mod_exit(void) - { -+#ifdef SSB_OHCI_DRIVER -+ ssb_driver_unregister(&SSB_OHCI_DRIVER); -+#endif - #ifdef PCI_DRIVER - pci_unregister_driver(&PCI_DRIVER); - #endif diff --git a/target/linux/brcm47xx-2.6/patches/210-ssb_merge.patch b/target/linux/brcm47xx-2.6/patches/210-ssb_merge.patch deleted file mode 100644 index 21986b342..000000000 --- a/target/linux/brcm47xx-2.6/patches/210-ssb_merge.patch +++ /dev/null @@ -1,421 +0,0 @@ -Index: linux-2.6.22-rc4/drivers/ssb/driver_chipcommon.c -=================================================================== ---- linux-2.6.22-rc4.orig/drivers/ssb/driver_chipcommon.c 2007-06-10 21:32:11.000000000 +0100 -+++ linux-2.6.22-rc4/drivers/ssb/driver_chipcommon.c 2007-06-10 21:33:25.000000000 +0100 -@@ -264,6 +264,31 @@ - ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); - } - -+/* TODO: These two functions are a clear candidate for merging, but one gets -+ * the processor clock, and the other gets the bus clock. -+ */ -+void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc, -+ u32 *plltype, u32 *n, u32 *m) -+{ -+ *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N); -+ *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT); -+ switch (*plltype) { -+ case SSB_PLLTYPE_2: -+ case SSB_PLLTYPE_4: -+ case SSB_PLLTYPE_6: -+ case SSB_PLLTYPE_7: -+ *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_MIPS); -+ break; -+ case SSB_PLLTYPE_3: -+ /* 5350 uses m2 to control mips */ -+ *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_M2); -+ break; -+ default: -+ *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_SB); -+ break; -+ } -+} -+ - void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc, - u32 *plltype, u32 *n, u32 *m) - { -@@ -400,3 +425,13 @@ - return nr_ports; - } - #endif /* CONFIG_SSB_SERIAL */ -+ -+/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */ -+int -+ssb_chipco_watchdog(struct ssb_chipcommon *cc, uint ticks) -+{ -+ /* instant NMI */ -+ chipco_write32(cc, SSB_CHIPCO_WATCHDOG, ticks); -+ return 0; -+} -+EXPORT_SYMBOL(ssb_chipco_watchdog); -Index: linux-2.6.22-rc4/drivers/ssb/driver_mipscore.c -=================================================================== ---- linux-2.6.22-rc4.orig/drivers/ssb/driver_mipscore.c 2007-06-10 21:32:11.000000000 +0100 -+++ linux-2.6.22-rc4/drivers/ssb/driver_mipscore.c 2007-06-10 21:33:25.000000000 +0100 -@@ -4,6 +4,7 @@ - * - * Copyright 2005, Broadcom Corporation - * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de> -+ * Copyright 2006, 2007, Felix Fietkau <nbd@openwrt.org> - * - * Licensed under the GNU/GPL. See COPYING for details. - */ -@@ -31,6 +32,16 @@ - ssb_write32(mcore->dev, offset, value); - } - -+static inline u32 extif_read32(struct ssb_extif *extif, u16 offset) -+{ -+ return ssb_read32(extif->dev, offset); -+} -+ -+static inline void extif_write32(struct ssb_extif *extif, u16 offset, u32 value) -+{ -+ ssb_write32(extif->dev, offset, value); -+} -+ - static const u32 ipsflag_irq_mask[] = { - 0, - SSB_IPSFLAG_IRQ1, -@@ -118,9 +129,9 @@ - } - - /* XXX: leave here or move into separate extif driver? */ --static int ssb_extif_serial_init(struct ssb_device *dev, struct ssb_serial_ports *ports) -+static int ssb_extif_serial_init(struct ssb_extif *dev, struct ssb_serial_port *ports) - { -- -+ return 0; - } - - -@@ -174,23 +185,76 @@ - { - struct ssb_bus *bus = mcore->dev->bus; - -+ mcore->flash_buswidth = 2; - if (bus->chipco.dev) { - mcore->flash_window = 0x1c000000; -- mcore->flash_window_size = 0x800000; -+ mcore->flash_window_size = 0x02000000; -+ if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG) -+ & SSB_CHIPCO_CFG_DS16) == 0) -+ mcore->flash_buswidth = 1; - } else { - mcore->flash_window = 0x1fc00000; -- mcore->flash_window_size = 0x400000; -+ mcore->flash_window_size = 0x00400000; - } - } - -+static void ssb_extif_timing_init(struct ssb_extif *extif, u32 ns) -+{ -+ u32 tmp; -+ -+ /* Initialize extif so we can get to the LEDs and external UART */ -+ extif_write32(extif, SSB_EXTIF_PROG_CFG, SSB_EXTCFG_EN); -+ -+ /* Set timing for the flash */ -+ tmp = ceildiv(10, ns) << SSB_PROG_WCNT_3_SHIFT; -+ tmp |= ceildiv(40, ns) << SSB_PROG_WCNT_1_SHIFT; -+ tmp |= ceildiv(120, ns); -+ extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp); -+ -+ /* Set programmable interface timing for external uart */ -+ tmp = ceildiv(10, ns) << SSB_PROG_WCNT_3_SHIFT; -+ tmp |= ceildiv(20, ns) << SSB_PROG_WCNT_2_SHIFT; -+ tmp |= ceildiv(100, ns) << SSB_PROG_WCNT_1_SHIFT; -+ tmp |= ceildiv(120, ns); -+ extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp); -+} - --static void ssb_cpu_clock(struct ssb_mipscore *mcore) -+static inline void ssb_extif_get_clockcontrol(struct ssb_extif *extif, -+ u32 *pll_type, u32 *n, u32 *m) - { -+ *pll_type = SSB_PLLTYPE_1; -+ *n = extif_read32(extif, SSB_EXTIF_CLOCK_N); -+ *m = extif_read32(extif, SSB_EXTIF_CLOCK_SB); - } - --void ssb_mipscore_init(struct ssb_mipscore *mcore) -+u32 ssb_cpu_clock(struct ssb_mipscore *mcore) - { - struct ssb_bus *bus = mcore->dev->bus; -+ u32 pll_type, n, m, rate = 0; -+ -+ if (bus->extif.dev) { -+ ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m); -+ } else if (bus->chipco.dev) { -+ ssb_chipco_get_clockcpu(&bus->chipco, &pll_type, &n, &m); -+ } else -+ return 0; -+ -+ if ((pll_type == SSB_PLLTYPE_5) || (bus->chip_id == 0x5365)) { -+ rate = 200000000; -+ } else { -+ rate = ssb_calc_clock_rate(pll_type, n, m); -+ } -+ -+ if (pll_type == SSB_PLLTYPE_6) { -+ rate *= 2; -+ } -+ -+ return rate; -+} -+ -+void ssb_mipscore_init(struct ssb_mipscore *mcore) -+{ -+ struct ssb_bus *bus; - struct ssb_device *dev; - unsigned long hz, ns; - unsigned int irq, i; -@@ -198,6 +262,8 @@ - if (!mcore->dev) - return; /* We don't have a MIPS core */ - -+ bus = mcore->dev->bus; -+ - ssb_dprintk(KERN_INFO PFX "Initializing MIPS core...\n"); - - hz = ssb_clockspeed(bus); -@@ -205,28 +271,9 @@ - hz = 100000000; - ns = 1000000000 / hz; - --//TODO --#if 0 -- if (have EXTIF) { -- /* Initialize extif so we can get to the LEDs and external UART */ -- W_REG(&eir->prog_config, CF_EN); -- -- /* Set timing for the flash */ -- tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ -- tmp = tmp | (CEIL(40, ns) << FW_W1_SHIFT); /* W1 = 40nS */ -- tmp = tmp | CEIL(120, ns); /* W0 = 120nS */ -- W_REG(&eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */ -- -- /* Set programmable interface timing for external uart */ -- tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */ -- tmp = tmp | (CEIL(20, ns) << FW_W2_SHIFT); /* W2 = 20nS */ -- tmp = tmp | (CEIL(100, ns) << FW_W1_SHIFT); /* W1 = 100nS */ -- tmp = tmp | CEIL(120, ns); /* W0 = 120nS */ -- W_REG(&eir->prog_waitcount, tmp); -- } -- else... chipcommon --#endif -- if (bus->chipco.dev) -+ if (bus->extif.dev) -+ ssb_extif_timing_init(&bus->extif, ns); -+ else if (bus->chipco.dev) - ssb_chipco_timing_init(&bus->chipco, ns); - - /* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */ -@@ -256,3 +303,5 @@ - ssb_mips_serial_init(mcore); - ssb_mips_flash_detect(mcore); - } -+ -+EXPORT_SYMBOL(ssb_mips_irq); -Index: linux-2.6.22-rc4/drivers/ssb/driver_pcicore.c -=================================================================== ---- linux-2.6.22-rc4.orig/drivers/ssb/driver_pcicore.c 2007-06-10 21:32:11.000000000 +0100 -+++ linux-2.6.22-rc4/drivers/ssb/driver_pcicore.c 2007-06-10 21:33:25.000000000 +0100 -@@ -93,6 +93,9 @@ - - /* Enable PCI bridge BAR1 prefetch and burst */ - pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3); -+ -+ /* Make sure our latency is high enough to handle the devices behind us */ -+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xa8); - } - DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_fixup_pcibridge); - -@@ -110,7 +113,7 @@ - - if (unlikely(pc->cardbusmode && dev > 1)) - goto out; -- if (bus == 0) { -+ if (bus == 0) {//FIXME busnumber ok? - /* Type 0 transaction */ - if (unlikely(dev >= SSB_PCI_SLOT_MAX)) - goto out; -@@ -224,7 +227,7 @@ - val = *((const u32 *)buf); - break; - } -- writel(*((const u32 *)buf), mmio); -+ writel(val, mmio); - - err = 0; - unmap: -@@ -307,6 +310,8 @@ - udelay(150); - val |= SSB_PCICORE_CTL_RST; /* Deassert RST# */ - pcicore_write32(pc, SSB_PCICORE_CTL, val); -+ val = SSB_PCICORE_ARBCTL_INTERN; -+ pcicore_write32(pc, SSB_PCICORE_ARBCTL, val); - udelay(1); - - //TODO cardbus mode -@@ -336,6 +341,7 @@ - * The following needs change, if we want to port hostmode - * to non-MIPS platform. */ - set_io_port_base((unsigned long)ioremap_nocache(SSB_PCI_MEM, 0x04000000)); -+ mdelay(300); - register_pci_controller(&ssb_pcicore_controller); - } - -Index: linux-2.6.22-rc4/include/linux/ssb/ssb_driver_chipcommon.h -=================================================================== ---- linux-2.6.22-rc4.orig/include/linux/ssb/ssb_driver_chipcommon.h 2007-06-10 21:32:11.000000000 +0100 -+++ linux-2.6.22-rc4/include/linux/ssb/ssb_driver_chipcommon.h 2007-06-10 21:33:25.000000000 +0100 -@@ -364,6 +364,8 @@ - extern void ssb_chipco_suspend(struct ssb_chipcommon *cc, pm_message_t state); - extern void ssb_chipco_resume(struct ssb_chipcommon *cc); - -+extern void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc, -+ u32 *plltype, u32 *n, u32 *m); - extern void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc, - u32 *plltype, u32 *n, u32 *m); - extern void ssb_chipco_timing_init(struct ssb_chipcommon *cc, -@@ -378,6 +380,46 @@ - extern void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc, - enum ssb_clkmode mode); - -+/* GPIO functions */ -+static inline u32 ssb_chipco_gpio_in(struct ssb_chipcommon *cc, -+ u32 mask) -+{ -+ return ssb_read32(cc->dev, SSB_CHIPCO_GPIOIN) & mask; -+} -+ -+static inline u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, -+ u32 mask, u32 value) -+{ -+ return ssb_write32_masked(cc->dev, SSB_CHIPCO_GPIOOUT, mask, value); -+} -+ -+static inline u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, -+ u32 mask, u32 value) -+{ -+ return ssb_write32_masked(cc->dev, SSB_CHIPCO_GPIOOUTEN, mask, value); -+} -+ -+static inline u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, -+ u32 mask, u32 value) -+{ -+ return ssb_write32_masked(cc->dev, SSB_CHIPCO_GPIOCTL, mask, value); -+} -+ -+static inline u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, -+ u32 mask, u32 value) -+{ -+ return ssb_write32_masked(cc->dev, SSB_CHIPCO_GPIOIRQ, mask, value); -+} -+ -+static inline u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, -+ u32 mask, u32 value) -+{ -+ return ssb_write32_masked(cc->dev, SSB_CHIPCO_GPIOPOL, mask, value); -+} -+/* TODO: GPIO reservation */ -+ -+extern int ssb_chipco_watchdog(struct ssb_chipcommon *cc, uint ticks); -+ - #ifdef CONFIG_SSB_SERIAL - extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc, - struct ssb_serial_port *ports); -Index: linux-2.6.22-rc4/include/linux/ssb/ssb_driver_extif.h -=================================================================== ---- linux-2.6.22-rc4.orig/include/linux/ssb/ssb_driver_extif.h 2007-06-10 21:32:11.000000000 +0100 -+++ linux-2.6.22-rc4/include/linux/ssb/ssb_driver_extif.h 2007-06-10 21:33:25.000000000 +0100 -@@ -158,6 +158,36 @@ - /* watchdog */ - #define SSB_EXTIF_WATCHDOG_CLK 48000000 /* Hz */ - -+/* GPIO functions */ -+static inline u32 ssb_extif_gpio_in(struct ssb_extif *extif, -+ u32 mask) -+{ -+ return ssb_read32(extif->dev, SSB_EXTIF_GPIO_IN) & mask; -+} -+ -+static inline u32 ssb_extif_gpio_out(struct ssb_extif *extif, -+ u32 mask, u32 value) -+{ -+ return ssb_write32_masked(extif->dev, SSB_EXTIF_GPIO_OUT(0), mask, value); -+} -+ -+static inline u32 ssb_extif_gpio_outen(struct ssb_extif *extif, -+ u32 mask, u32 value) -+{ -+ return ssb_write32_masked(extif->dev, SSB_EXTIF_GPIO_OUTEN(0), mask, value); -+} -+ -+static inline u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, -+ u32 mask, u32 value) -+{ -+ return ssb_write32_masked(extif->dev, SSB_EXTIF_GPIO_INTPOL, mask, value); -+} -+ -+static inline u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, -+ u32 mask, u32 value) -+{ -+ return ssb_write32_masked(extif->dev, SSB_EXTIF_GPIO_INTMASK, mask, value); -+} - - #endif /* __KERNEL__ */ - #endif /* LINUX_SSB_EXTIFCORE_H_ */ -Index: linux-2.6.22-rc4/include/linux/ssb/ssb_driver_mips.h -=================================================================== ---- linux-2.6.22-rc4.orig/include/linux/ssb/ssb_driver_mips.h 2007-06-10 21:32:11.000000000 +0100 -+++ linux-2.6.22-rc4/include/linux/ssb/ssb_driver_mips.h 2007-06-10 21:33:25.000000000 +0100 -@@ -22,11 +22,13 @@ - int nr_serial_ports; - struct ssb_serial_port serial_ports[4]; - -+ int flash_buswidth; - u32 flash_window; - u32 flash_window_size; - }; - - extern void ssb_mipscore_init(struct ssb_mipscore *mcore); -+extern u32 ssb_cpu_clock(struct ssb_mipscore *mcore); - - extern unsigned int ssb_mips_irq(struct ssb_device *dev); - -Index: linux-2.6.22-rc4/include/linux/ssb/ssb.h -=================================================================== ---- linux-2.6.22-rc4.orig/include/linux/ssb/ssb.h 2007-06-10 21:32:11.000000000 +0100 -+++ linux-2.6.22-rc4/include/linux/ssb/ssb.h 2007-06-10 21:33:25.000000000 +0100 -@@ -263,6 +263,12 @@ - #define SSB_CHIPPACK_BCM4712M 2 /* Medium 225pin 4712 */ - #define SSB_CHIPPACK_BCM4712L 0 /* Large 340pin 4712 */ - -+static inline u16 ssb_read16(struct ssb_device *dev, u16 offset); -+static inline u32 ssb_read32(struct ssb_device *dev, u16 offset); -+static inline void ssb_write16(struct ssb_device *dev, u16 offset, u16 value); -+static inline void ssb_write32(struct ssb_device *dev, u16 offset, u32 value); -+static inline u32 ssb_write32_masked(struct ssb_device *dev, u16 offset, u32 mask, u32 value); -+ - #include <linux/ssb/ssb_driver_chipcommon.h> - #include <linux/ssb/ssb_driver_mips.h> - #include <linux/ssb/ssb_driver_extif.h> -@@ -369,6 +375,16 @@ - dev->ops->write32(dev, offset, value); - } - -+static inline u32 ssb_write32_masked(struct ssb_device *dev, -+ u16 offset, -+ u32 mask, -+ u32 value) -+{ -+ value &= mask; -+ value |= ssb_read32(dev, offset) & ~mask; -+ ssb_write32(dev, offset, value); -+ return value; -+} - - /* Translation (routing) bits that need to be ORed to DMA - * addresses before they are given to a device. */ |