diff options
Diffstat (limited to 'target/linux/brcm-2.4/patches')
17 files changed, 0 insertions, 3765 deletions
diff --git a/target/linux/brcm-2.4/patches/001-bcm47xx.patch b/target/linux/brcm-2.4/patches/001-bcm47xx.patch deleted file mode 100644 index ba1e41ee9..000000000 --- a/target/linux/brcm-2.4/patches/001-bcm47xx.patch +++ /dev/null @@ -1,596 +0,0 @@ ---- a/arch/mips/config-shared.in -+++ b/arch/mips/config-shared.in -@@ -208,6 +208,14 @@ if [ "$CONFIG_SIBYTE_SB1xxx_SOC" = "y" ] - fi - define_bool CONFIG_MIPS_RTC y - fi -+dep_bool 'Support for Broadcom MIPS-based boards' CONFIG_MIPS_BRCM $CONFIG_EXPERIMENTAL -+dep_bool 'Support for Broadcom BCM947XX' CONFIG_BCM947XX $CONFIG_MIPS_BRCM -+if [ "$CONFIG_BCM947XX" = "y" ] ; then -+ bool ' Support for Broadcom BCM4710' CONFIG_BCM4710 -+ bool ' Support for Broadcom BCM4310' CONFIG_BCM4310 -+ bool ' Support for Broadcom BCM4704' CONFIG_BCM4704 -+ bool ' Support for Broadcom BCM5365' CONFIG_BCM5365 -+fi - bool 'Support for SNI RM200 PCI' CONFIG_SNI_RM200_PCI - bool 'Support for TANBAC TB0226 (Mbase)' CONFIG_TANBAC_TB0226 - bool 'Support for TANBAC TB0229 (VR4131DIMM)' CONFIG_TANBAC_TB0229 -@@ -229,6 +237,11 @@ define_bool CONFIG_RWSEM_GENERIC_SPINLOC - define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM n - - # -+# Provide an option for a default kernel command line -+# -+string 'Default kernel command string' CONFIG_CMDLINE "" -+ -+# - # Select some configuration options automatically based on user selections. - # - if [ "$CONFIG_ACER_PICA_61" = "y" ]; then -@@ -554,6 +567,12 @@ if [ "$CONFIG_SIBYTE_SB1xxx_SOC" = "y" ] - define_bool CONFIG_SWAP_IO_SPACE_L y - define_bool CONFIG_BOOT_ELF32 y - fi -+if [ "$CONFIG_BCM947XX" = "y" ] ; then -+ define_bool CONFIG_PCI y -+ define_bool CONFIG_NONCOHERENT_IO y -+ define_bool CONFIG_NEW_TIME_C y -+ define_bool CONFIG_NEW_IRQ y -+fi - if [ "$CONFIG_SNI_RM200_PCI" = "y" ]; then - define_bool CONFIG_ARC32 y - define_bool CONFIG_ARC_MEMORY y -@@ -1042,7 +1061,11 @@ comment 'Kernel hacking' - - bool 'Are you using a crosscompiler' CONFIG_CROSSCOMPILE - bool 'Enable run-time debugging' CONFIG_RUNTIME_DEBUG --bool 'Remote GDB kernel debugging' CONFIG_KGDB -+if [ "$CONFIG_BCM947XX" = "y" ] ; then -+ bool 'Remote GDB kernel debugging' CONFIG_REMOTE_DEBUG -+else -+ bool 'Remote GDB kernel debugging' CONFIG_KGDB -+fi - dep_bool ' Console output to GDB' CONFIG_GDB_CONSOLE $CONFIG_KGDB - if [ "$CONFIG_KGDB" = "y" ]; then - define_bool CONFIG_DEBUG_INFO y ---- a/arch/mips/kernel/cpu-probe.c -+++ b/arch/mips/kernel/cpu-probe.c -@@ -162,7 +162,7 @@ static inline int __cpu_has_fpu(void) - - static inline void cpu_probe_legacy(struct cpuinfo_mips *c) - { -- switch (c->processor_id & 0xff00) { -+ switch (c->processor_id & PRID_IMP_MASK) { - case PRID_IMP_R2000: - c->cputype = CPU_R2000; - c->isa_level = MIPS_CPU_ISA_I; -@@ -172,7 +172,7 @@ static inline void cpu_probe_legacy(stru - c->tlbsize = 64; - break; - case PRID_IMP_R3000: -- if ((c->processor_id & 0xff) == PRID_REV_R3000A) -+ if ((c->processor_id & PRID_REV_MASK) == PRID_REV_R3000A) - if (cpu_has_confreg()) - c->cputype = CPU_R3081E; - else -@@ -187,12 +187,12 @@ static inline void cpu_probe_legacy(stru - break; - case PRID_IMP_R4000: - if (read_c0_config() & CONF_SC) { -- if ((c->processor_id & 0xff) >= PRID_REV_R4400) -+ if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_R4400) - c->cputype = CPU_R4400PC; - else - c->cputype = CPU_R4000PC; - } else { -- if ((c->processor_id & 0xff) >= PRID_REV_R4400) -+ if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_R4400) - c->cputype = CPU_R4400SC; - else - c->cputype = CPU_R4000SC; -@@ -438,7 +438,7 @@ static inline void decode_config1(struct - static inline void cpu_probe_mips(struct cpuinfo_mips *c) - { - decode_config1(c); -- switch (c->processor_id & 0xff00) { -+ switch (c->processor_id & PRID_IMP_MASK) { - case PRID_IMP_4KC: - c->cputype = CPU_4KC; - c->isa_level = MIPS_CPU_ISA_M32; -@@ -479,10 +479,10 @@ static inline void cpu_probe_alchemy(str - { - decode_config1(c); - c->options |= MIPS_CPU_PREFETCH; -- switch (c->processor_id & 0xff00) { -+ switch (c->processor_id & PRID_IMP_MASK) { - case PRID_IMP_AU1_REV1: - case PRID_IMP_AU1_REV2: -- switch ((c->processor_id >> 24) & 0xff) { -+ switch ((c->processor_id >> 24) & PRID_REV_MASK) { - case 0: - c->cputype = CPU_AU1000; - break; -@@ -510,10 +510,34 @@ static inline void cpu_probe_alchemy(str - } - } - -+static inline void cpu_probe_broadcom(struct cpuinfo_mips *c) -+{ -+ decode_config1(c); -+ c->options |= MIPS_CPU_PREFETCH; -+ switch (c->processor_id & PRID_IMP_MASK) { -+ case PRID_IMP_BCM4710: -+ c->cputype = CPU_BCM4710; -+ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | -+ MIPS_CPU_4KTLB | MIPS_CPU_COUNTER; -+ c->scache.flags = MIPS_CACHE_NOT_PRESENT; -+ break; -+ case PRID_IMP_4KC: -+ case PRID_IMP_BCM3302: -+ c->cputype = CPU_BCM3302; -+ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | -+ MIPS_CPU_4KTLB | MIPS_CPU_COUNTER; -+ c->scache.flags = MIPS_CACHE_NOT_PRESENT; -+ break; -+ default: -+ c->cputype = CPU_UNKNOWN; -+ break; -+ } -+} -+ - static inline void cpu_probe_sibyte(struct cpuinfo_mips *c) - { - decode_config1(c); -- switch (c->processor_id & 0xff00) { -+ switch (c->processor_id & PRID_IMP_MASK) { - case PRID_IMP_SB1: - c->cputype = CPU_SB1; - c->isa_level = MIPS_CPU_ISA_M64; -@@ -535,7 +559,7 @@ static inline void cpu_probe_sibyte(stru - static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c) - { - decode_config1(c); -- switch (c->processor_id & 0xff00) { -+ switch (c->processor_id & PRID_IMP_MASK) { - case PRID_IMP_SR71000: - c->cputype = CPU_SR71000; - c->isa_level = MIPS_CPU_ISA_M64; -@@ -560,7 +584,7 @@ __init void cpu_probe(void) - c->cputype = CPU_UNKNOWN; - - c->processor_id = read_c0_prid(); -- switch (c->processor_id & 0xff0000) { -+ switch (c->processor_id & PRID_COMP_MASK) { - - case PRID_COMP_LEGACY: - cpu_probe_legacy(c); -@@ -571,6 +595,9 @@ __init void cpu_probe(void) - case PRID_COMP_ALCHEMY: - cpu_probe_alchemy(c); - break; -+ case PRID_COMP_BROADCOM: -+ cpu_probe_broadcom(c); -+ break; - case PRID_COMP_SIBYTE: - cpu_probe_sibyte(c); - break; ---- a/arch/mips/kernel/head.S -+++ b/arch/mips/kernel/head.S -@@ -28,12 +28,20 @@ - #include <asm/mipsregs.h> - #include <asm/stackframe.h> - -+#ifdef CONFIG_BCM4710 -+#undef eret -+#define eret nop; nop; eret -+#endif -+ - .text -+ j kernel_entry -+ nop -+ - /* - * Reserved space for exception handlers. - * Necessary for machines which link their kernels at KSEG0. - */ -- .fill 0x400 -+ .fill 0x3f4 - - /* The following two symbols are used for kernel profiling. */ - EXPORT(stext) ---- a/arch/mips/kernel/proc.c -+++ b/arch/mips/kernel/proc.c -@@ -78,9 +78,10 @@ static const char *cpu_name[] = { - [CPU_AU1550] "Au1550", - [CPU_24K] "MIPS 24K", - [CPU_AU1200] "Au1200", -+ [CPU_BCM4710] "BCM4710", -+ [CPU_BCM3302] "BCM3302", - }; - -- - static int show_cpuinfo(struct seq_file *m, void *v) - { - unsigned int version = current_cpu_data.processor_id; ---- a/arch/mips/kernel/setup.c -+++ b/arch/mips/kernel/setup.c -@@ -493,6 +493,7 @@ void __init setup_arch(char **cmdline_p) - void swarm_setup(void); - void hp_setup(void); - void au1x00_setup(void); -+ void brcm_setup(void); - void frame_info_init(void); - - frame_info_init(); -@@ -691,6 +692,11 @@ void __init setup_arch(char **cmdline_p) - pmc_yosemite_setup(); - break; - #endif -+#if defined(CONFIG_BCM4710) || defined(CONFIG_BCM4310) -+ case MACH_GROUP_BRCM: -+ brcm_setup(); -+ break; -+#endif - default: - panic("Unsupported architecture"); - } ---- a/arch/mips/kernel/traps.c -+++ b/arch/mips/kernel/traps.c -@@ -920,6 +920,7 @@ void __init per_cpu_trap_init(void) - void __init trap_init(void) - { - extern char except_vec1_generic; -+ extern char except_vec2_generic; - extern char except_vec3_generic, except_vec3_r4000; - extern char except_vec_ejtag_debug; - extern char except_vec4; -@@ -927,6 +928,7 @@ void __init trap_init(void) - - /* Copy the generic exception handler code to it's final destination. */ - memcpy((void *)(KSEG0 + 0x80), &except_vec1_generic, 0x80); -+ memcpy((void *)(KSEG0 + 0x100), &except_vec2_generic, 0x80); - - /* - * Setup default vectors -@@ -985,6 +987,12 @@ void __init trap_init(void) - set_except_vector(13, handle_tr); - set_except_vector(22, handle_mdmx); - -+ if (current_cpu_data.cputype == CPU_SB1) { -+ /* Enable timer interrupt and scd mapped interrupt */ -+ clear_c0_status(0xf000); -+ set_c0_status(0xc00); -+ } -+ - if (cpu_has_fpu && !cpu_has_nofpuex) - set_except_vector(15, handle_fpe); - ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -726,6 +726,19 @@ LOADADDR += 0x80020000 - endif - - # -+# Broadcom BCM947XX variants -+# -+ifdef CONFIG_BCM947XX -+LIBS += arch/mips/bcm947xx/generic/brcm.o arch/mips/bcm947xx/bcm947xx.o -+SUBDIRS += arch/mips/bcm947xx/generic arch/mips/bcm947xx -+LOADADDR := 0x80001000 -+ -+zImage: vmlinux -+ $(MAKE) -C arch/$(ARCH)/bcm947xx/compressed -+export LOADADDR -+endif -+ -+# - # Choosing incompatible machines durings configuration will result in - # error messages during linking. Select a default linkscript if - # none has been choosen above. -@@ -779,6 +792,7 @@ archclean: - $(MAKE) -C arch/$(ARCH)/tools clean - $(MAKE) -C arch/mips/baget clean - $(MAKE) -C arch/mips/lasat clean -+ $(MAKE) -C arch/mips/bcm947xx/compressed clean - - archmrproper: - @$(MAKEBOOT) mrproper ---- a/arch/mips/mm/c-r4k.c -+++ b/arch/mips/mm/c-r4k.c -@@ -1118,3 +1118,47 @@ void __init ld_mmu_r4xx0(void) - build_clear_page(); - build_copy_page(); - } -+ -+#ifdef CONFIG_BCM4704 -+static void __init mips32_icache_fill(unsigned long addr, uint nbytes) -+{ -+ unsigned long ic_lsize = current_cpu_data.icache.linesz; -+ int i; -+ for (i = 0; i < nbytes; i += ic_lsize) -+ fill_icache_line((addr + i)); -+} -+ -+/* -+ * This must be run from the cache on 4704A0 -+ * so there are no mips core BIU ops in progress -+ * when the PFC is enabled. -+ */ -+#define PFC_CR0 0xff400000 /* control reg 0 */ -+#define PFC_CR1 0xff400004 /* control reg 1 */ -+static void __init enable_pfc(u32 mode) -+{ -+ /* write range */ -+ *(volatile u32 *)PFC_CR1 = 0xffff0000; -+ -+ /* enable */ -+ *(volatile u32 *)PFC_CR0 = mode; -+} -+#endif -+ -+ -+void check_enable_mips_pfc(int val) -+{ -+ -+#ifdef CONFIG_BCM4704 -+ struct cpuinfo_mips *c = ¤t_cpu_data; -+ -+ /* enable prefetch cache */ -+ if (((c->processor_id & (PRID_COMP_MASK | PRID_IMP_MASK)) == PRID_IMP_BCM3302) -+ && (read_c0_diag() & (1 << 29))) { -+ mips32_icache_fill((unsigned long) &enable_pfc, 64); -+ enable_pfc(val); -+ } -+#endif -+} -+ -+ ---- a/arch/mips/pci/Makefile -+++ b/arch/mips/pci/Makefile -@@ -13,7 +13,9 @@ obj-$(CONFIG_MIPS_GT64120) += ops-gt6412 - obj-$(CONFIG_MIPS_MSC) += ops-msc.o - obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o - obj-$(CONFIG_SNI_RM200_PCI) += ops-sni.o -+ifndef CONFIG_BCM947XX - obj-y += pci.o -+endif - obj-$(CONFIG_PCI_AUTO) += pci_auto.o - - include $(TOPDIR)/Rules.make ---- a/drivers/char/serial.c -+++ b/drivers/char/serial.c -@@ -444,6 +444,10 @@ static _INLINE_ unsigned int serial_in(s - return inb(info->port+1); - #endif - case SERIAL_IO_MEM: -+#ifdef CONFIG_BCM4310 -+ readb((unsigned long) info->iomem_base + -+ (UART_SCR<<info->iomem_reg_shift)); -+#endif - return readb((unsigned long) info->iomem_base + - (offset<<info->iomem_reg_shift)); - default: -@@ -464,6 +468,9 @@ static _INLINE_ void serial_out(struct a - case SERIAL_IO_MEM: - writeb(value, (unsigned long) info->iomem_base + - (offset<<info->iomem_reg_shift)); -+#ifdef CONFIG_BCM4704 -+ *((volatile unsigned int *) KSEG1ADDR(0x18000000)); -+#endif - break; - default: - outb(value, info->port+offset); -@@ -1728,7 +1735,7 @@ static void change_speed(struct async_st - /* Special case since 134 is really 134.5 */ - quot = (2*baud_base / 269); - else if (baud) -- quot = baud_base / baud; -+ quot = (baud_base + (baud / 2)) / baud; - } - /* If the quotient is zero refuse the change */ - if (!quot && old_termios) { -@@ -1745,12 +1752,12 @@ static void change_speed(struct async_st - /* Special case since 134 is really 134.5 */ - quot = (2*baud_base / 269); - else if (baud) -- quot = baud_base / baud; -+ quot = (baud_base + (baud / 2)) / baud; - } - } - /* As a last resort, if the quotient is zero, default to 9600 bps */ - if (!quot) -- quot = baud_base / 9600; -+ quot = (baud_base + 4800) / 9600; - /* - * Work around a bug in the Oxford Semiconductor 952 rev B - * chip which causes it to seriously miscalculate baud rates -@@ -5994,6 +6001,13 @@ static int __init serial_console_setup(s - * Divisor, bytesize and parity - */ - state = rs_table + co->index; -+ /* -+ * Safe guard: state structure must have been initialized -+ */ -+ if (state->iomem_base == NULL) { -+ printk("!unable to setup serial console!\n"); -+ return -1; -+ } - if (doflow) - state->flags |= ASYNC_CONS_FLOW; - info = &async_sercons; -@@ -6007,7 +6021,7 @@ static int __init serial_console_setup(s - info->io_type = state->io_type; - info->iomem_base = state->iomem_base; - info->iomem_reg_shift = state->iomem_reg_shift; -- quot = state->baud_base / baud; -+ quot = (state->baud_base + (baud / 2)) / baud; - cval = cflag & (CSIZE | CSTOPB); - #if defined(__powerpc__) || defined(__alpha__) - cval >>= 8; ---- a/drivers/net/Makefile -+++ b/drivers/net/Makefile -@@ -3,6 +3,8 @@ - # Makefile for the Linux network (ethercard) device drivers. - # - -+EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include -+ - obj-y := - obj-m := - obj-n := ---- a/drivers/parport/Config.in -+++ b/drivers/parport/Config.in -@@ -11,6 +11,7 @@ comment 'Parallel port support' - tristate 'Parallel port support' CONFIG_PARPORT - if [ "$CONFIG_PARPORT" != "n" ]; then - dep_tristate ' PC-style hardware' CONFIG_PARPORT_PC $CONFIG_PARPORT -+ dep_tristate ' Asus WL500g parallel port' CONFIG_PARPORT_SPLINK $CONFIG_PARPORT - if [ "$CONFIG_PARPORT_PC" != "n" -a "$CONFIG_SERIAL" != "n" ]; then - if [ "$CONFIG_SERIAL" = "m" ]; then - define_tristate CONFIG_PARPORT_PC_CML1 m ---- a/drivers/parport/Makefile -+++ b/drivers/parport/Makefile -@@ -22,6 +22,7 @@ endif - - obj-$(CONFIG_PARPORT) += parport.o - obj-$(CONFIG_PARPORT_PC) += parport_pc.o -+obj-$(CONFIG_PARPORT_SPLINK) += parport_splink.o - obj-$(CONFIG_PARPORT_PC_PCMCIA) += parport_cs.o - obj-$(CONFIG_PARPORT_AMIGA) += parport_amiga.o - obj-$(CONFIG_PARPORT_MFC3) += parport_mfc3.o ---- a/include/asm-mips/bootinfo.h -+++ b/include/asm-mips/bootinfo.h -@@ -37,6 +37,7 @@ - #define MACH_GROUP_HP_LJ 20 /* Hewlett Packard LaserJet */ - #define MACH_GROUP_LASAT 21 - #define MACH_GROUP_TITAN 22 /* PMC-Sierra Titan */ -+#define MACH_GROUP_BRCM 23 /* Broadcom */ - - /* - * Valid machtype values for group unknown (low order halfword of mips_machtype) -@@ -197,6 +198,15 @@ - #define MACH_TANBAC_TB0229 7 /* TANBAC TB0229 (VR4131DIMM) */ - - /* -+ * Valid machtypes for group Broadcom -+ */ -+#define MACH_BCM93725 0 -+#define MACH_BCM93725_VJ 1 -+#define MACH_BCM93730 2 -+#define MACH_BCM947XX 3 -+#define MACH_BCM933XX 4 -+ -+/* - * Valid machtype for group TITAN - */ - #define MACH_TITAN_YOSEMITE 1 /* PMC-Sierra Yosemite */ ---- a/include/asm-mips/cpu.h -+++ b/include/asm-mips/cpu.h -@@ -22,6 +22,11 @@ - spec. - */ - -+#define PRID_COPT_MASK 0xff000000 -+#define PRID_COMP_MASK 0x00ff0000 -+#define PRID_IMP_MASK 0x0000ff00 -+#define PRID_REV_MASK 0x000000ff -+ - #define PRID_COMP_LEGACY 0x000000 - #define PRID_COMP_MIPS 0x010000 - #define PRID_COMP_BROADCOM 0x020000 -@@ -58,6 +63,7 @@ - #define PRID_IMP_RM7000 0x2700 - #define PRID_IMP_NEVADA 0x2800 /* RM5260 ??? */ - #define PRID_IMP_RM9000 0x3400 -+#define PRID_IMP_BCM4710 0x4000 - #define PRID_IMP_R5432 0x5400 - #define PRID_IMP_R5500 0x5500 - #define PRID_IMP_4KC 0x8000 -@@ -66,10 +72,16 @@ - #define PRID_IMP_4KEC 0x8400 - #define PRID_IMP_4KSC 0x8600 - #define PRID_IMP_25KF 0x8800 -+#define PRID_IMP_BCM3302 0x9000 -+#define PRID_IMP_BCM3303 0x9100 - #define PRID_IMP_24K 0x9300 - - #define PRID_IMP_UNKNOWN 0xff00 - -+#define BCM330X(id) \ -+ (((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3302)) \ -+ || ((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3303))) -+ - /* - * These are the PRID's for when 23:16 == PRID_COMP_SIBYTE - */ -@@ -174,7 +186,9 @@ - #define CPU_AU1550 57 - #define CPU_24K 58 - #define CPU_AU1200 59 --#define CPU_LAST 59 -+#define CPU_BCM4710 60 -+#define CPU_BCM3302 61 -+#define CPU_LAST 61 - - /* - * ISA Level encodings ---- a/include/asm-mips/r4kcache.h -+++ b/include/asm-mips/r4kcache.h -@@ -567,4 +567,17 @@ static inline void blast_scache128_page_ - cache128_unroll32(addr|ws,Index_Writeback_Inv_SD); - } - -+extern inline void fill_icache_line(unsigned long addr) -+{ -+ __asm__ __volatile__( -+ ".set noreorder\n\t" -+ ".set mips3\n\t" -+ "cache %1, (%0)\n\t" -+ ".set mips0\n\t" -+ ".set reorder" -+ : -+ : "r" (addr), -+ "i" (Fill)); -+} -+ - #endif /* __ASM_R4KCACHE_H */ ---- a/include/asm-mips/serial.h -+++ b/include/asm-mips/serial.h -@@ -223,6 +223,13 @@ - #define TXX927_SERIAL_PORT_DEFNS - #endif - -+#ifdef CONFIG_BCM947XX -+/* reserve 4 ports to be configured at runtime */ -+#define BCM947XX_SERIAL_PORT_DEFNS { 0, }, { 0, }, { 0, }, { 0, }, -+#else -+#define BCM947XX_SERIAL_PORT_DEFNS -+#endif -+ - #ifdef CONFIG_HAVE_STD_PC_SERIAL_PORT - #define STD_SERIAL_PORT_DEFNS \ - /* UART CLK PORT IRQ FLAGS */ \ -@@ -470,6 +477,7 @@ - #define SERIAL_PORT_DFNS \ - ATLAS_SERIAL_PORT_DEFNS \ - AU1000_SERIAL_PORT_DEFNS \ -+ BCM947XX_SERIAL_PORT_DEFNS \ - COBALT_SERIAL_PORT_DEFNS \ - DDB5477_SERIAL_PORT_DEFNS \ - EV96100_SERIAL_PORT_DEFNS \ ---- a/init/do_mounts.c -+++ b/init/do_mounts.c -@@ -255,7 +255,13 @@ static struct dev_name_struct { - { "ftlb", 0x2c08 }, - { "ftlc", 0x2c10 }, - { "ftld", 0x2c18 }, -+#if defined(CONFIG_MTD_BLOCK) || defined(CONFIG_MTD_BLOCK_RO) - { "mtdblock", 0x1f00 }, -+ { "mtdblock0",0x1f00 }, -+ { "mtdblock1",0x1f01 }, -+ { "mtdblock2",0x1f02 }, -+ { "mtdblock3",0x1f03 }, -+#endif - { "nb", 0x2b00 }, - { NULL, 0 } - }; diff --git a/target/linux/brcm-2.4/patches/003-bcm47xx_cache_fixes.patch b/target/linux/brcm-2.4/patches/003-bcm47xx_cache_fixes.patch deleted file mode 100644 index 28f8ac48b..000000000 --- a/target/linux/brcm-2.4/patches/003-bcm47xx_cache_fixes.patch +++ /dev/null @@ -1,491 +0,0 @@ ---- a/arch/mips/kernel/entry.S -+++ b/arch/mips/kernel/entry.S -@@ -100,6 +100,10 @@ END(except_vec1_generic) - * and R4400 SC and MC versions. - */ - NESTED(except_vec3_generic, 0, sp) -+#ifdef CONFIG_BCM4710 -+ nop -+ nop -+#endif - #if R5432_CP0_INTERRUPT_WAR - mfc0 k0, CP0_INDEX - #endif ---- a/arch/mips/mm/c-r4k.c -+++ b/arch/mips/mm/c-r4k.c -@@ -14,6 +14,12 @@ - #include <linux/mm.h> - #include <linux/bitops.h> - -+#ifdef CONFIG_BCM4710 -+#include "../bcm947xx/include/typedefs.h" -+#include "../bcm947xx/include/sbconfig.h" -+#include <asm/paccess.h> -+#endif -+ - #include <asm/bcache.h> - #include <asm/bootinfo.h> - #include <asm/cacheops.h> -@@ -40,6 +46,7 @@ static struct bcache_ops no_sc_ops = { - .bc_inv = (void *)no_sc_noop - }; - -+int bcm4710 = 0; - struct bcache_ops *bcops = &no_sc_ops; - - #define cpu_is_r4600_v1_x() ((read_c0_prid() & 0xfffffff0) == 0x2010) -@@ -64,8 +71,10 @@ static inline void r4k_blast_dcache_page - static inline void r4k_blast_dcache_page_setup(void) - { - unsigned long dc_lsize = current_cpu_data.dcache.linesz; -- -- if (dc_lsize == 16) -+ -+ if (bcm4710) -+ r4k_blast_dcache_page = blast_dcache_page; -+ else if (dc_lsize == 16) - r4k_blast_dcache_page = blast_dcache16_page; - else if (dc_lsize == 32) - r4k_blast_dcache_page = r4k_blast_dcache_page_dc32; -@@ -77,7 +86,9 @@ static void r4k_blast_dcache_page_indexe - { - unsigned long dc_lsize = current_cpu_data.dcache.linesz; - -- if (dc_lsize == 16) -+ if (bcm4710) -+ r4k_blast_dcache_page_indexed = blast_dcache_page_indexed; -+ else if (dc_lsize == 16) - r4k_blast_dcache_page_indexed = blast_dcache16_page_indexed; - else if (dc_lsize == 32) - r4k_blast_dcache_page_indexed = blast_dcache32_page_indexed; -@@ -89,7 +100,9 @@ static inline void r4k_blast_dcache_setu - { - unsigned long dc_lsize = current_cpu_data.dcache.linesz; - -- if (dc_lsize == 16) -+ if (bcm4710) -+ r4k_blast_dcache = blast_dcache; -+ else if (dc_lsize == 16) - r4k_blast_dcache = blast_dcache16; - else if (dc_lsize == 32) - r4k_blast_dcache = blast_dcache32; -@@ -266,6 +279,7 @@ static void r4k___flush_cache_all(void) - r4k_blast_dcache(); - r4k_blast_icache(); - -+ if (!bcm4710) - switch (current_cpu_data.cputype) { - case CPU_R4000SC: - case CPU_R4000MC: -@@ -304,10 +318,10 @@ static void r4k_flush_cache_mm(struct mm - * Kludge alert. For obscure reasons R4000SC and R4400SC go nuts if we - * only flush the primary caches but R10000 and R12000 behave sane ... - */ -- if (current_cpu_data.cputype == CPU_R4000SC || -+ if (!bcm4710 && (current_cpu_data.cputype == CPU_R4000SC || - current_cpu_data.cputype == CPU_R4000MC || - current_cpu_data.cputype == CPU_R4400SC || -- current_cpu_data.cputype == CPU_R4400MC) -+ current_cpu_data.cputype == CPU_R4400MC)) - r4k_blast_scache(); - } - -@@ -383,12 +397,15 @@ static void r4k_flush_icache_range(unsig - unsigned long ic_lsize = current_cpu_data.icache.linesz; - unsigned long addr, aend; - -+ addr = start & ~(dc_lsize - 1); -+ aend = (end - 1) & ~(dc_lsize - 1); -+ - if (!cpu_has_ic_fills_f_dc) { - if (end - start > dcache_size) - r4k_blast_dcache(); - else { -- addr = start & ~(dc_lsize - 1); -- aend = (end - 1) & ~(dc_lsize - 1); -+ BCM4710_PROTECTED_FILL_TLB(addr); -+ BCM4710_PROTECTED_FILL_TLB(aend); - - while (1) { - /* Hit_Writeback_Inv_D */ -@@ -403,8 +420,6 @@ static void r4k_flush_icache_range(unsig - if (end - start > icache_size) - r4k_blast_icache(); - else { -- addr = start & ~(ic_lsize - 1); -- aend = (end - 1) & ~(ic_lsize - 1); - while (1) { - /* Hit_Invalidate_I */ - protected_flush_icache_line(addr); -@@ -413,6 +428,9 @@ static void r4k_flush_icache_range(unsig - addr += ic_lsize; - } - } -+ -+ if (bcm4710) -+ flush_cache_all(); - } - - /* -@@ -443,7 +461,8 @@ static void r4k_flush_icache_page(struct - if (cpu_has_subset_pcaches) { - unsigned long addr = (unsigned long) page_address(page); - -- r4k_blast_scache_page(addr); -+ if (!bcm4710) -+ r4k_blast_scache_page(addr); - ClearPageDcacheDirty(page); - - return; -@@ -451,6 +470,7 @@ static void r4k_flush_icache_page(struct - - if (!cpu_has_ic_fills_f_dc) { - unsigned long addr = (unsigned long) page_address(page); -+ - r4k_blast_dcache_page(addr); - ClearPageDcacheDirty(page); - } -@@ -477,7 +497,7 @@ static void r4k_dma_cache_wback_inv(unsi - /* Catch bad driver code */ - BUG_ON(size == 0); - -- if (cpu_has_subset_pcaches) { -+ if (!bcm4710 && cpu_has_subset_pcaches) { - unsigned long sc_lsize = current_cpu_data.scache.linesz; - - if (size >= scache_size) { -@@ -509,6 +529,8 @@ static void r4k_dma_cache_wback_inv(unsi - R4600_HIT_CACHEOP_WAR_IMPL; - a = addr & ~(dc_lsize - 1); - end = (addr + size - 1) & ~(dc_lsize - 1); -+ BCM4710_FILL_TLB(a); -+ BCM4710_FILL_TLB(end); - while (1) { - flush_dcache_line(a); /* Hit_Writeback_Inv_D */ - if (a == end) -@@ -527,7 +549,7 @@ static void r4k_dma_cache_inv(unsigned l - /* Catch bad driver code */ - BUG_ON(size == 0); - -- if (cpu_has_subset_pcaches) { -+ if (!bcm4710 && (cpu_has_subset_pcaches)) { - unsigned long sc_lsize = current_cpu_data.scache.linesz; - - if (size >= scache_size) { -@@ -554,6 +576,8 @@ static void r4k_dma_cache_inv(unsigned l - R4600_HIT_CACHEOP_WAR_IMPL; - a = addr & ~(dc_lsize - 1); - end = (addr + size - 1) & ~(dc_lsize - 1); -+ BCM4710_FILL_TLB(a); -+ BCM4710_FILL_TLB(end); - while (1) { - flush_dcache_line(a); /* Hit_Writeback_Inv_D */ - if (a == end) -@@ -577,6 +601,8 @@ static void r4k_flush_cache_sigtramp(uns - unsigned long dc_lsize = current_cpu_data.dcache.linesz; - - R4600_HIT_CACHEOP_WAR_IMPL; -+ BCM4710_PROTECTED_FILL_TLB(addr); -+ BCM4710_PROTECTED_FILL_TLB(addr + 4); - protected_writeback_dcache_line(addr & ~(dc_lsize - 1)); - protected_flush_icache_line(addr & ~(ic_lsize - 1)); - if (MIPS4K_ICACHE_REFILL_WAR) { -@@ -986,10 +1012,12 @@ static void __init setup_scache(void) - case CPU_R4000MC: - case CPU_R4400SC: - case CPU_R4400MC: -- probe_scache_kseg1 = (probe_func_t) (KSEG1ADDR(&probe_scache)); -- sc_present = probe_scache_kseg1(config); -- if (sc_present) -- c->options |= MIPS_CPU_CACHE_CDEX_S; -+ if (!bcm4710) { -+ probe_scache_kseg1 = (probe_func_t) (KSEG1ADDR(&probe_scache)); -+ sc_present = probe_scache_kseg1(config); -+ if (sc_present) -+ c->options |= MIPS_CPU_CACHE_CDEX_S; -+ } - break; - - case CPU_R10000: -@@ -1041,6 +1069,19 @@ static void __init setup_scache(void) - static inline void coherency_setup(void) - { - change_c0_config(CONF_CM_CMASK, CONF_CM_DEFAULT); -+ -+#if defined(CONFIG_BCM4310) || defined(CONFIG_BCM4704) || defined(CONFIG_BCM5365) -+ if (BCM330X(current_cpu_data.processor_id)) { -+ uint32 cm; -+ -+ cm = read_c0_diag(); -+ /* Enable icache */ -+ cm |= (1 << 31); -+ /* Enable dcache */ -+ cm |= (1 << 30); -+ write_c0_diag(cm); -+ } -+#endif - - /* - * c0_status.cu=0 specifies that updates by the sc instruction use -@@ -1073,6 +1114,12 @@ void __init ld_mmu_r4xx0(void) - memcpy((void *)(KSEG0 + 0x100), &except_vec2_generic, 0x80); - memcpy((void *)(KSEG1 + 0x100), &except_vec2_generic, 0x80); - -+ if (current_cpu_data.cputype == CPU_BCM4710 && (current_cpu_data.processor_id & PRID_REV_MASK) == 0) { -+ printk("Enabling BCM4710A0 cache workarounds.\n"); -+ bcm4710 = 1; -+ } else -+ bcm4710 = 0; -+ - probe_pcache(); - setup_scache(); - ---- a/arch/mips/mm/tlbex-mips32.S -+++ b/arch/mips/mm/tlbex-mips32.S -@@ -90,6 +90,9 @@ - .set noat - LEAF(except_vec0_r4000) - .set mips3 -+#ifdef CONFIG_BCM4704 -+ nop -+#endif - #ifdef CONFIG_SMP - mfc0 k1, CP0_CONTEXT - la k0, pgd_current ---- a/include/asm-mips/r4kcache.h -+++ b/include/asm-mips/r4kcache.h -@@ -15,6 +15,18 @@ - #include <asm/asm.h> - #include <asm/cacheops.h> - -+#ifdef CONFIG_BCM4710 -+#define BCM4710_DUMMY_RREG() (((sbconfig_t *)(KSEG1ADDR(SB_ENUM_BASE + SBCONFIGOFF)))->sbimstate) -+ -+#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr)) -+#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); }) -+#else -+#define BCM4710_DUMMY_RREG() -+ -+#define BCM4710_FILL_TLB(addr) -+#define BCM4710_PROTECTED_FILL_TLB(addr) -+#endif -+ - #define cache_op(op,addr) \ - __asm__ __volatile__( \ - " .set noreorder \n" \ -@@ -27,12 +39,25 @@ - - static inline void flush_icache_line_indexed(unsigned long addr) - { -- cache_op(Index_Invalidate_I, addr); -+ unsigned int way; -+ unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit; -+ -+ for (way = 0; way < current_cpu_data.dcache.ways; way++) { -+ cache_op(Index_Invalidate_I, addr); -+ addr += ws_inc; -+ } - } - - static inline void flush_dcache_line_indexed(unsigned long addr) - { -- cache_op(Index_Writeback_Inv_D, addr); -+ unsigned int way; -+ unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit; -+ -+ for (way = 0; way < current_cpu_data.dcache.ways; way++) { -+ BCM4710_DUMMY_RREG(); -+ cache_op(Index_Writeback_Inv_D, addr); -+ addr += ws_inc; -+ } - } - - static inline void flush_scache_line_indexed(unsigned long addr) -@@ -47,6 +72,7 @@ static inline void flush_icache_line(uns - - static inline void flush_dcache_line(unsigned long addr) - { -+ BCM4710_DUMMY_RREG(); - cache_op(Hit_Writeback_Inv_D, addr); - } - -@@ -91,6 +117,7 @@ static inline void protected_flush_icach - */ - static inline void protected_writeback_dcache_line(unsigned long addr) - { -+ BCM4710_DUMMY_RREG(); - __asm__ __volatile__( - ".set noreorder\n\t" - ".set mips3\n" -@@ -138,6 +165,62 @@ static inline void invalidate_tcache_pag - : "r" (base), \ - "i" (op)); - -+#define cache_unroll(base,op) \ -+ __asm__ __volatile__(" \ -+ .set noreorder; \ -+ .set mips3; \ -+ cache %1, (%0); \ -+ .set mips0; \ -+ .set reorder" \ -+ : \ -+ : "r" (base), \ -+ "i" (op)); -+ -+ -+static inline void blast_dcache(void) -+{ -+ unsigned long start = KSEG0; -+ unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways; -+ unsigned long end = (start + dcache_size); -+ -+ while(start < end) { -+ BCM4710_DUMMY_RREG(); -+ cache_unroll(start,Index_Writeback_Inv_D); -+ start += current_cpu_data.dcache.linesz; -+ } -+} -+ -+static inline void blast_dcache_page(unsigned long page) -+{ -+ unsigned long start = page; -+ unsigned long end = start + PAGE_SIZE; -+ -+ BCM4710_FILL_TLB(start); -+ do { -+ BCM4710_DUMMY_RREG(); -+ cache_unroll(start,Hit_Writeback_Inv_D); -+ start += current_cpu_data.dcache.linesz; -+ } while (start < end); -+} -+ -+static inline void blast_dcache_page_indexed(unsigned long page) -+{ -+ unsigned long start = page; -+ unsigned long end = start + PAGE_SIZE; -+ unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit; -+ unsigned long ws_end = current_cpu_data.dcache.ways << -+ current_cpu_data.dcache.waybit; -+ unsigned long ws, addr; -+ -+ for (ws = 0; ws < ws_end; ws += ws_inc) { -+ start = page + ws; -+ for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) { -+ BCM4710_DUMMY_RREG(); -+ cache_unroll(addr,Index_Writeback_Inv_D); -+ } -+ } -+} -+ - static inline void blast_dcache16(void) - { - unsigned long start = KSEG0; -@@ -148,8 +231,9 @@ static inline void blast_dcache16(void) - unsigned long ws, addr; - - for (ws = 0; ws < ws_end; ws += ws_inc) -- for (addr = start; addr < end; addr += 0x200) -+ for (addr = start; addr < end; addr += 0x200) { - cache16_unroll32(addr|ws,Index_Writeback_Inv_D); -+ } - } - - static inline void blast_dcache16_page(unsigned long page) -@@ -173,8 +257,9 @@ static inline void blast_dcache16_page_i - unsigned long ws, addr; - - for (ws = 0; ws < ws_end; ws += ws_inc) -- for (addr = start; addr < end; addr += 0x200) -+ for (addr = start; addr < end; addr += 0x200) { - cache16_unroll32(addr|ws,Index_Writeback_Inv_D); -+ } - } - - static inline void blast_icache16(void) -@@ -196,6 +281,7 @@ static inline void blast_icache16_page(u - unsigned long start = page; - unsigned long end = start + PAGE_SIZE; - -+ BCM4710_FILL_TLB(start); - do { - cache16_unroll32(start,Hit_Invalidate_I); - start += 0x200; -@@ -281,6 +367,7 @@ static inline void blast_scache16_page_i - : "r" (base), \ - "i" (op)); - -+ - static inline void blast_dcache32(void) - { - unsigned long start = KSEG0; -@@ -291,8 +378,9 @@ static inline void blast_dcache32(void) - unsigned long ws, addr; - - for (ws = 0; ws < ws_end; ws += ws_inc) -- for (addr = start; addr < end; addr += 0x400) -+ for (addr = start; addr < end; addr += 0x400) { - cache32_unroll32(addr|ws,Index_Writeback_Inv_D); -+ } - } - - static inline void blast_dcache32_page(unsigned long page) -@@ -316,8 +404,9 @@ static inline void blast_dcache32_page_i - unsigned long ws, addr; - - for (ws = 0; ws < ws_end; ws += ws_inc) -- for (addr = start; addr < end; addr += 0x400) -+ for (addr = start; addr < end; addr += 0x400) { - cache32_unroll32(addr|ws,Index_Writeback_Inv_D); -+ } - } - - static inline void blast_icache32(void) -@@ -339,6 +428,7 @@ static inline void blast_icache32_page(u - unsigned long start = page; - unsigned long end = start + PAGE_SIZE; - -+ BCM4710_FILL_TLB(start); - do { - cache32_unroll32(start,Hit_Invalidate_I); - start += 0x400; -@@ -443,6 +533,7 @@ static inline void blast_icache64_page(u - unsigned long start = page; - unsigned long end = start + PAGE_SIZE; - -+ BCM4710_FILL_TLB(start); - do { - cache64_unroll32(start,Hit_Invalidate_I); - start += 0x800; ---- a/include/asm-mips/stackframe.h -+++ b/include/asm-mips/stackframe.h -@@ -209,6 +209,20 @@ - - #endif - -+#if defined(CONFIG_BCM4710) || defined(CONFIG_BCM4704) -+ -+#undef RESTORE_SP_AND_RET -+#define RESTORE_SP_AND_RET \ -+ lw sp, PT_R29(sp); \ -+ .set mips3; \ -+ nop; \ -+ nop; \ -+ eret; \ -+ .set mips0 -+ -+#endif -+ -+ - #define RESTORE_SP \ - lw sp, PT_R29(sp); \ - ---- a/mm/memory.c -+++ b/mm/memory.c -@@ -927,6 +927,7 @@ static inline void break_cow(struct vm_a - flush_page_to_ram(new_page); - flush_cache_page(vma, address); - establish_pte(vma, address, page_table, pte_mkwrite(pte_mkdirty(mk_pte(new_page, vma->vm_page_prot)))); -+ flush_icache_page(vma, new_page); - } - - /* diff --git a/target/linux/brcm-2.4/patches/004-flash.patch b/target/linux/brcm-2.4/patches/004-flash.patch deleted file mode 100644 index cbcf0da3b..000000000 --- a/target/linux/brcm-2.4/patches/004-flash.patch +++ /dev/null @@ -1,68 +0,0 @@ ---- a/arch/mips/bcm947xx/Makefile -+++ b/arch/mips/bcm947xx/Makefile -@@ -11,6 +11,7 @@ export-objs := export.o - obj-y := prom.o setup.o time.o sbmips.o gpio.o - obj-y += nvram.o cfe_env.o hndpmu.o - obj-y += sbutils.o utils.o bcmsrom.o hndchipc.o -+obj-y += sflash.o - obj-$(CONFIG_PCI) += sbpci.o pcibios.o - obj-y += export.o - ---- a/drivers/mtd/devices/Config.in -+++ b/drivers/mtd/devices/Config.in -@@ -5,6 +5,7 @@ - mainmenu_option next_comment - - comment 'Self-contained MTD device drivers' -+bool ' Broadcom Chipcommon Serial Flash support' CONFIG_MTD_SFLASH - dep_tristate ' Ramix PMC551 PCI Mezzanine RAM card support' CONFIG_MTD_PMC551 $CONFIG_MTD $CONFIG_PCI - if [ "$CONFIG_MTD_PMC551" = "y" -o "$CONFIG_MTD_PMC551" = "m" ]; then - bool ' PMC551 256M DRAM Bugfix' CONFIG_MTD_PMC551_BUGFIX ---- a/drivers/mtd/devices/Makefile -+++ b/drivers/mtd/devices/Makefile -@@ -3,6 +3,8 @@ - # - # $Id: Makefile,v 1.4 2001/06/26 21:10:05 spse Exp $ - -+EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include -+ - O_TARGET := devlink.o - - # *** BIG UGLY NOTE *** -@@ -12,6 +14,7 @@ O_TARGET := devlink.o - # here where previously there was none. We now have to ensure that - # doc200[01].o are linked before docprobe.o - -+obj-$(CONFIG_MTD_SFLASH) += sflash.o - obj-$(CONFIG_MTD_DOC1000) += doc1000.o - obj-$(CONFIG_MTD_DOC2000) += doc2000.o - obj-$(CONFIG_MTD_DOC2001) += doc2001.o ---- a/drivers/mtd/maps/Config.in -+++ b/drivers/mtd/maps/Config.in -@@ -48,6 +48,7 @@ if [ "$CONFIG_PPC" = "y" ]; then - fi - - if [ "$CONFIG_MIPS" = "y" ]; then -+ dep_tristate ' CFI Flash device mapped on Broadcom BCM947XX boards' CONFIG_MTD_BCM947XX $CONFIG_MTD_CFI - dep_tristate ' Pb1000 MTD support' CONFIG_MTD_PB1000 $CONFIG_MIPS_PB1000 - dep_tristate ' Pb1500 MTD support' CONFIG_MTD_PB1500 $CONFIG_MIPS_PB1500 - dep_tristate ' Pb1100 MTD support' CONFIG_MTD_PB1100 $CONFIG_MIPS_PB1100 ---- a/drivers/mtd/maps/Makefile -+++ b/drivers/mtd/maps/Makefile -@@ -3,6 +3,8 @@ - # - # $Id: Makefile,v 1.37 2003/01/24 14:26:38 dwmw2 Exp $ - -+EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include -+ - BELOW25 := $(shell echo $(PATCHLEVEL) | sed s/[1234]/y/) - - ifeq ($(BELOW25),y) -@@ -10,6 +12,7 @@ O_TARGET := mapslink.o - endif - - # Chip mappings -+obj-$(CONFIG_MTD_BCM947XX) += bcm947xx-flash.o - obj-$(CONFIG_MTD_CDB89712) += cdb89712.o - obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o - obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o diff --git a/target/linux/brcm-2.4/patches/005-bluetooth_sco_buffer_align.patch b/target/linux/brcm-2.4/patches/005-bluetooth_sco_buffer_align.patch deleted file mode 100644 index 7fd1fb160..000000000 --- a/target/linux/brcm-2.4/patches/005-bluetooth_sco_buffer_align.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/drivers/bluetooth/hci_usb.c -+++ b/drivers/bluetooth/hci_usb.c -@@ -259,6 +259,9 @@ static int hci_usb_isoc_rx_submit(struct - void *buf; - - mtu = husb->isoc_in_ep->wMaxPacketSize; -+#ifdef CONFIG_BCM4710 -+ mtu = (mtu + 1) & ~1; /* brcm: isoc buffers must be aligned on word boundary */ -+#endif - size = mtu * HCI_MAX_ISOC_FRAMES; - - buf = kmalloc(size, GFP_ATOMIC); diff --git a/target/linux/brcm-2.4/patches/006-ide_workaround.patch b/target/linux/brcm-2.4/patches/006-ide_workaround.patch deleted file mode 100644 index f77aa64c6..000000000 --- a/target/linux/brcm-2.4/patches/006-ide_workaround.patch +++ /dev/null @@ -1,17 +0,0 @@ ---- a/arch/mips/lib/ide-std.c -+++ b/arch/mips/lib/ide-std.c -@@ -31,12 +31,14 @@ static int std_ide_default_irq(ide_ioreg - static ide_ioreg_t std_ide_default_io_base(int index) - { - switch (index) { -+#if 0 - case 0: return 0x1f0; - case 1: return 0x170; - case 2: return 0x1e8; - case 3: return 0x168; - case 4: return 0x1e0; - case 5: return 0x160; -+#endif - default: - return 0; - } diff --git a/target/linux/brcm-2.4/patches/008-b44_bcm47xx_support.patch b/target/linux/brcm-2.4/patches/008-b44_bcm47xx_support.patch deleted file mode 100644 index 28d54e9b9..000000000 --- a/target/linux/brcm-2.4/patches/008-b44_bcm47xx_support.patch +++ /dev/null @@ -1,580 +0,0 @@ ---- a/drivers/net/b44.c -+++ b/drivers/net/b44.c -@@ -1,7 +1,9 @@ - /* b44.c: Broadcom 4400 device driver. - * - * Copyright (C) 2002 David S. Miller (davem@redhat.com) -- * Fixed by Pekka Pietikainen (pp@ee.oulu.fi) -+ * Copyright (C) 2004 Pekka Pietikainen (pp@ee.oulu.fi) -+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) -+ * Copyright (C) 2006 Felix Fietkau (nbd@openwrt.org) - * - * Distribute under GPL. - */ -@@ -25,6 +27,39 @@ - - #include "b44.h" - -+#include <typedefs.h> -+#include <bcmdevs.h> -+#include <osl.h> -+#include <bcmnvram.h> -+#include <sbconfig.h> -+#include <sbchipc.h> -+#include <sflash.h> -+ -+#ifdef CONFIG_BCM947XX -+#define atoi(str) simple_strtoul(((str != NULL) ? str : ""), NULL, 0) -+ -+static inline void e_aton(char *str, char *dest) -+{ -+ int i = 0; -+ u16 *d = (u16 *) dest; -+ -+ if (str == NULL) { -+ memset(dest, 0, 6); -+ return; -+ } -+ -+ for (;;) { -+ dest[i++] = (char) simple_strtoul(str, NULL, 16); -+ str += 2; -+ if (!*str++ || i == 6) -+ break; -+ } -+} -+ -+static int instance = 0; -+#endif -+ -+ - #define DRV_MODULE_NAME "b44" - #define PFX DRV_MODULE_NAME ": " - #define DRV_MODULE_VERSION "0.93" -@@ -75,7 +110,7 @@ static char version[] __devinitdata = - DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; - - MODULE_AUTHOR("David S. Miller (davem@redhat.com)"); --MODULE_DESCRIPTION("Broadcom 4400 10/100 PCI ethernet driver"); -+MODULE_DESCRIPTION("Broadcom 4400/47xx 10/100 PCI ethernet driver"); - MODULE_LICENSE("GPL"); - MODULE_PARM(b44_debug, "i"); - MODULE_PARM_DESC(b44_debug, "B44 bitmapped debugging message enable value"); -@@ -89,6 +124,8 @@ static struct pci_device_id b44_pci_tbl[ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, - { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B1, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, -+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4713, -+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, - { } /* terminate list with empty entry */ - }; - -@@ -113,11 +150,13 @@ static int b44_wait_bit(struct b44 *bp, - udelay(10); - } - if (i == timeout) { -+#ifdef DEBUG - printk(KERN_ERR PFX "%s: BUG! Timeout waiting for bit %08x of register " - "%lx to %s.\n", - bp->dev->name, - bit, reg, - (clear ? "clear" : "set")); -+#endif - return -ENODEV; - } - return 0; -@@ -236,6 +275,8 @@ static void ssb_core_reset(struct b44 *b - udelay(1); - } - -+static int b44_4713_instance; -+ - static int ssb_core_unit(struct b44 *bp) - { - #if 0 -@@ -258,6 +299,9 @@ static int ssb_core_unit(struct b44 *bp) - break; - }; - #endif -+ if (bp->pdev->device == PCI_DEVICE_ID_BCM4713) -+ return b44_4713_instance++; -+ else - return 0; - } - -@@ -267,6 +311,28 @@ static int ssb_is_core_up(struct b44 *bp - == SBTMSLOW_CLOCK); - } - -+static inline void __b44_cam_read(struct b44 *bp, unsigned char *data, int index) -+{ -+ u32 val; -+ -+ bw32(B44_CAM_CTRL, (CAM_CTRL_READ | -+ (index << CAM_CTRL_INDEX_SHIFT))); -+ -+ b44_wait_bit(bp, B44_CAM_CTRL, CAM_CTRL_BUSY, 100, 1); -+ -+ val = br32(B44_CAM_DATA_LO); -+ -+ data[2] = (val >> 24) & 0xFF; -+ data[3] = (val >> 16) & 0xFF; -+ data[4] = (val >> 8) & 0xFF; -+ data[5] = (val >> 0) & 0xFF; -+ -+ val = br32(B44_CAM_DATA_HI); -+ -+ data[0] = (val >> 8) & 0xFF; -+ data[1] = (val >> 0) & 0xFF; -+} -+ - static void __b44_cam_write(struct b44 *bp, unsigned char *data, int index) - { - u32 val; -@@ -287,7 +353,7 @@ static void __b44_cam_write(struct b44 * - - static inline void __b44_disable_ints(struct b44 *bp) - { -- bw32(B44_IMASK, 0); -+ bw32(B44_IMASK, ISTAT_TO); /* leave the timeout interrupt active */ - } - - static void b44_disable_ints(struct b44 *bp) -@@ -303,14 +369,14 @@ static void b44_enable_ints(struct b44 * - bw32(B44_IMASK, bp->imask); - } - --static int b44_readphy(struct b44 *bp, int reg, u32 *val) -+static int __b44_readphy(struct b44 *bp, int phy_addr, int reg, u32 *val) - { - int err; - - bw32(B44_EMAC_ISTAT, EMAC_INT_MII); - bw32(B44_MDIO_DATA, (MDIO_DATA_SB_START | - (MDIO_OP_READ << MDIO_DATA_OP_SHIFT) | -- (bp->phy_addr << MDIO_DATA_PMD_SHIFT) | -+ (phy_addr << MDIO_DATA_PMD_SHIFT) | - (reg << MDIO_DATA_RA_SHIFT) | - (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT))); - err = b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0); -@@ -319,23 +385,42 @@ static int b44_readphy(struct b44 *bp, i - return err; - } - --static int b44_writephy(struct b44 *bp, int reg, u32 val) -+static int b44_readphy(struct b44 *bp, int reg, u32 *val) -+{ -+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) -+ return 0; -+ -+ return __b44_readphy(bp, bp->phy_addr, reg, val); -+} -+ -+static int __b44_writephy(struct b44 *bp, int phy_addr, int reg, u32 val) - { - bw32(B44_EMAC_ISTAT, EMAC_INT_MII); - bw32(B44_MDIO_DATA, (MDIO_DATA_SB_START | - (MDIO_OP_WRITE << MDIO_DATA_OP_SHIFT) | -- (bp->phy_addr << MDIO_DATA_PMD_SHIFT) | -+ (phy_addr << MDIO_DATA_PMD_SHIFT) | - (reg << MDIO_DATA_RA_SHIFT) | - (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT) | - (val & MDIO_DATA_DATA))); - return b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0); - } - -+static int b44_writephy(struct b44 *bp, int reg, u32 val) -+{ -+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) -+ return 0; -+ -+ return __b44_writephy(bp, bp->phy_addr, reg, val); -+} -+ - static int b44_phy_reset(struct b44 *bp) - { - u32 val; - int err; - -+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) -+ return 0; -+ - err = b44_writephy(bp, MII_BMCR, BMCR_RESET); - if (err) - return err; -@@ -406,6 +491,23 @@ static int b44_setup_phy(struct b44 *bp) - u32 val; - int err; - -+ -+ /* -+ * workaround for bad hardware design in Linksys WAP54G v1.0 -+ * see https://dev.openwrt.org/ticket/146 -+ * check and reset bit "isolate" -+ */ -+ if ((bp->pdev->device == PCI_DEVICE_ID_BCM4713) && -+ (atoi(nvram_get("boardnum")) == 2) && -+ (__b44_readphy(bp, 0, MII_BMCR, &val) == 0) && -+ (val & BMCR_ISOLATE) && -+ (__b44_writephy(bp, 0, MII_BMCR, val & ~BMCR_ISOLATE) != 0)) { -+ printk(KERN_WARNING PFX "PHY: cannot reset MII transceiver isolate bit.\n"); -+ } -+ -+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) -+ return 0; -+ - if ((err = b44_readphy(bp, B44_MII_ALEDCTRL, &val)) != 0) - goto out; - if ((err = b44_writephy(bp, B44_MII_ALEDCTRL, -@@ -498,6 +600,19 @@ static void b44_check_phy(struct b44 *bp - { - u32 bmsr, aux; - -+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) { -+ bp->flags |= B44_FLAG_100_BASE_T; -+ bp->flags |= B44_FLAG_FULL_DUPLEX; -+ if (!netif_carrier_ok(bp->dev)) { -+ u32 val = br32(B44_TX_CTRL); -+ val |= TX_CTRL_DUPLEX; -+ bw32(B44_TX_CTRL, val); -+ netif_carrier_on(bp->dev); -+ b44_link_report(bp); -+ } -+ return; -+ } -+ - if (!b44_readphy(bp, MII_BMSR, &bmsr) && - !b44_readphy(bp, B44_MII_AUXCTRL, &aux) && - (bmsr != 0xffff)) { -@@ -765,6 +880,25 @@ static int b44_rx(struct b44 *bp, int bu - return received; - } - -+ -+static inline void __b44_reset(struct b44 *bp) -+{ -+ spin_lock_irq(&bp->lock); -+ b44_halt(bp); -+ b44_init_rings(bp); -+ b44_init_hw(bp); -+ spin_unlock_irq(&bp->lock); -+ -+ b44_enable_ints(bp); -+ netif_wake_queue(bp->dev); -+} -+ -+static inline void __b44_set_timeout(struct b44 *bp, int timeout) -+{ -+ /* Set timeout for Rx to two seconds after the last Tx */ -+ bw32(B44_GPTIMER, timeout ? 2 * 125000000 : 0); -+} -+ - static int b44_poll(struct net_device *netdev, int *budget) - { - struct b44 *bp = netdev->priv; -@@ -772,13 +906,13 @@ static int b44_poll(struct net_device *n - - spin_lock_irq(&bp->lock); - -- if (bp->istat & (ISTAT_TX | ISTAT_TO)) { -+ if (bp->istat & ISTAT_TX) { - /* spin_lock(&bp->tx_lock); */ - b44_tx(bp); - /* spin_unlock(&bp->tx_lock); */ - } - spin_unlock_irq(&bp->lock); -- -+ - done = 1; - if (bp->istat & ISTAT_RX) { - int orig_budget = *budget; -@@ -796,24 +930,18 @@ static int b44_poll(struct net_device *n - done = 0; - } - -- if (bp->istat & ISTAT_ERRORS) { -- spin_lock_irq(&bp->lock); -- b44_halt(bp); -- b44_init_rings(bp); -- b44_init_hw(bp); -- netif_wake_queue(bp->dev); -- spin_unlock_irq(&bp->lock); -- done = 1; -- } -- - if (done) { - netif_rx_complete(netdev); - b44_enable_ints(bp); - } - -+ if ((bp->core_unit == 1) && (bp->istat & (ISTAT_TX | ISTAT_RX))) -+ __b44_set_timeout(bp, (bp->istat & ISTAT_TX) ? 1 : 0); -+ - return (done ? 0 : 1); - } - -+ - static irqreturn_t b44_interrupt(int irq, void *dev_id, struct pt_regs *regs) - { - struct net_device *dev = dev_id; -@@ -832,6 +960,18 @@ static irqreturn_t b44_interrupt(int irq - */ - istat &= imask; - if (istat) { -+ /* Workaround for the WL-500g WAN port hang */ -+ if (istat & (ISTAT_TO | ISTAT_ERRORS)) { -+ /* -+ * no rx before the watchdog timeout -+ * reset the interface -+ */ -+ __b44_reset(bp); -+ } -+ -+ if ((bp->core_unit == 1) && (bp->istat & (ISTAT_TX | ISTAT_RX))) -+ __b44_set_timeout(bp, (bp->istat & ISTAT_TX) ? 1 : 0); -+ - handled = 1; - if (netif_rx_schedule_prep(dev)) { - /* NOTE: These writes are posted by the readback of -@@ -848,6 +988,7 @@ static irqreturn_t b44_interrupt(int irq - bw32(B44_ISTAT, istat); - br32(B44_ISTAT); - } -+ - spin_unlock_irqrestore(&bp->lock, flags); - return IRQ_RETVAL(handled); - } -@@ -859,16 +1000,7 @@ static void b44_tx_timeout(struct net_de - printk(KERN_ERR PFX "%s: transmit timed out, resetting\n", - dev->name); - -- spin_lock_irq(&bp->lock); -- -- b44_halt(bp); -- b44_init_rings(bp); -- b44_init_hw(bp); -- -- spin_unlock_irq(&bp->lock); -- -- b44_enable_ints(bp); -- -+ __b44_reset(bp); - netif_wake_queue(dev); - } - -@@ -1092,6 +1224,8 @@ static void b44_clear_stats(struct b44 * - /* bp->lock is held. */ - static void b44_chip_reset(struct b44 *bp) - { -+ unsigned int sb_clock; -+ - if (ssb_is_core_up(bp)) { - bw32(B44_RCV_LAZY, 0); - bw32(B44_ENET_CTRL, ENET_CTRL_DISABLE); -@@ -1105,9 +1239,10 @@ static void b44_chip_reset(struct b44 *b - bw32(B44_DMARX_CTRL, 0); - bp->rx_prod = bp->rx_cons = 0; - } else { -- ssb_pci_setup(bp, (bp->core_unit == 0 ? -- SBINTVEC_ENET0 : -- SBINTVEC_ENET1)); -+ /*if (bp->pdev->device != PCI_DEVICE_ID_BCM4713)*/ -+ ssb_pci_setup(bp, (bp->core_unit == 0 ? -+ SBINTVEC_ENET0 : -+ SBINTVEC_ENET1)); - } - - ssb_core_reset(bp); -@@ -1115,6 +1250,11 @@ static void b44_chip_reset(struct b44 *b - b44_clear_stats(bp); - - /* Make PHY accessible. */ -+ if (bp->pdev->device == PCI_DEVICE_ID_BCM4713) -+ sb_clock = 100000000; /* 100 MHz */ -+ else -+ sb_clock = 62500000; /* 62.5 MHz */ -+ - bw32(B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE | - (0x0d & MDIO_CTRL_MAXF_MASK))); - br32(B44_MDIO_CTRL); -@@ -1216,6 +1356,8 @@ static int b44_open(struct net_device *d - struct b44 *bp = dev->priv; - int err; - -+ netif_carrier_off(dev); -+ - err = b44_alloc_consistent(bp); - if (err) - return err; -@@ -1236,9 +1378,10 @@ static int b44_open(struct net_device *d - bp->timer.expires = jiffies + HZ; - bp->timer.data = (unsigned long) bp; - bp->timer.function = b44_timer; -- add_timer(&bp->timer); -+ b44_timer((unsigned long) bp); - - b44_enable_ints(bp); -+ netif_start_queue(dev); - - return 0; - -@@ -1638,7 +1781,7 @@ static int b44_ioctl(struct net_device * - u32 mii_regval; - - spin_lock_irq(&bp->lock); -- err = b44_readphy(bp, data->reg_num & 0x1f, &mii_regval); -+ err = __b44_readphy(bp, data->phy_id & 0x1f, data->reg_num & 0x1f, &mii_regval); - spin_unlock_irq(&bp->lock); - - data->val_out = mii_regval; -@@ -1651,7 +1794,7 @@ static int b44_ioctl(struct net_device * - return -EPERM; - - spin_lock_irq(&bp->lock); -- err = b44_writephy(bp, data->reg_num & 0x1f, data->val_in); -+ err = __b44_writephy(bp, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in); - spin_unlock_irq(&bp->lock); - - return err; -@@ -1678,21 +1821,52 @@ static int b44_read_eeprom(struct b44 *b - static int __devinit b44_get_invariants(struct b44 *bp) - { - u8 eeprom[128]; -+ u8 buf[32]; - int err; -+ unsigned long flags; - -- err = b44_read_eeprom(bp, &eeprom[0]); -- if (err) -- goto out; -- -- bp->dev->dev_addr[0] = eeprom[79]; -- bp->dev->dev_addr[1] = eeprom[78]; -- bp->dev->dev_addr[2] = eeprom[81]; -- bp->dev->dev_addr[3] = eeprom[80]; -- bp->dev->dev_addr[4] = eeprom[83]; -- bp->dev->dev_addr[5] = eeprom[82]; -- -- bp->phy_addr = eeprom[90] & 0x1f; -- bp->mdc_port = (eeprom[90] >> 14) & 0x1; -+ if (bp->pdev->device == PCI_DEVICE_ID_BCM4713) { -+#ifdef CONFIG_BCM947XX -+ sprintf(buf, "et%dmacaddr", instance - 1); -+ e_aton(nvram_get(buf), bp->dev->dev_addr); -+ -+ sprintf(buf, "et%dphyaddr", instance - 1); -+ bp->phy_addr = B44_PHY_ADDR_NO_PHY; -+#else -+ /* -+ * BCM47xx boards don't have a EEPROM. The MAC is stored in -+ * a NVRAM area somewhere in the flash memory. As we don't -+ * know the location and/or the format of the NVRAM area -+ * here, we simply rely on the bootloader to write the -+ * MAC into the CAM. -+ */ -+ spin_lock_irqsave(&bp->lock, flags); -+ __b44_cam_read(bp, bp->dev->dev_addr, 0); -+ spin_unlock_irqrestore(&bp->lock, flags); -+ -+ /* -+ * BCM47xx boards don't have a PHY. Usually there is a switch -+ * chip with multiple PHYs connected to the PHY port. -+ */ -+ bp->phy_addr = B44_PHY_ADDR_NO_PHY; -+#endif -+ bp->dma_offset = 0; -+ } else { -+ err = b44_read_eeprom(bp, &eeprom[0]); -+ if (err) -+ return err; -+ -+ bp->dev->dev_addr[0] = eeprom[79]; -+ bp->dev->dev_addr[1] = eeprom[78]; -+ bp->dev->dev_addr[2] = eeprom[81]; -+ bp->dev->dev_addr[3] = eeprom[80]; -+ bp->dev->dev_addr[4] = eeprom[83]; -+ bp->dev->dev_addr[5] = eeprom[82]; -+ -+ bp->phy_addr = eeprom[90] & 0x1f; -+ bp->dma_offset = SB_PCI_DMA; -+ bp->mdc_port = (eeprom[90] >> 14) & 0x1; -+ } - - /* With this, plus the rx_header prepended to the data by the - * hardware, we'll land the ethernet header on a 2-byte boundary. -@@ -1702,13 +1876,12 @@ static int __devinit b44_get_invariants( - bp->imask = IMASK_DEF; - - bp->core_unit = ssb_core_unit(bp); -- bp->dma_offset = ssb_get_addr(bp, SBID_PCI_DMA, 0); - - /* XXX - really required? - bp->flags |= B44_FLAG_BUGGY_TXPTR; - */ --out: -- return err; -+ -+ return 0; - } - - static int __devinit b44_init_one(struct pci_dev *pdev, -@@ -1720,6 +1893,10 @@ static int __devinit b44_init_one(struct - struct b44 *bp; - int err, i; - -+#ifdef CONFIG_BCM947XX -+ instance++; -+#endif -+ - if (b44_version_printed++ == 0) - printk(KERN_INFO "%s", version); - -@@ -1834,11 +2011,17 @@ static int __devinit b44_init_one(struct - */ - b44_chip_reset(bp); - -- printk(KERN_INFO "%s: Broadcom 4400 10/100BaseT Ethernet ", dev->name); -+ printk(KERN_INFO "%s: Broadcom %s 10/100BaseT Ethernet ", dev->name, -+ (pdev->device == PCI_DEVICE_ID_BCM4713) ? "47xx" : "4400"); - for (i = 0; i < 6; i++) - printk("%2.2x%c", dev->dev_addr[i], - i == 5 ? '\n' : ':'); - -+ /* Initialize phy */ -+ spin_lock_irq(&bp->lock); -+ b44_chip_reset(bp); -+ spin_unlock_irq(&bp->lock); -+ - return 0; - - err_out_iounmap: ---- a/drivers/net/b44.h -+++ b/drivers/net/b44.h -@@ -229,8 +229,6 @@ - #define SBIPSFLAG_IMASK4 0x3f000000 /* Which sbflags --> mips interrupt 4 */ - #define SBIPSFLAG_ISHIFT4 24 - #define B44_SBTPSFLAG 0x0F18UL /* SB Target Port OCP Slave Flag */ --#define SBTPS_NUM0_MASK 0x0000003f --#define SBTPS_F0EN0 0x00000040 - #define B44_SBADMATCH3 0x0F60UL /* SB Address Match 3 */ - #define B44_SBADMATCH2 0x0F68UL /* SB Address Match 2 */ - #define B44_SBADMATCH1 0x0F70UL /* SB Address Match 1 */ -@@ -461,6 +459,8 @@ struct ring_info { - }; - - #define B44_MCAST_TABLE_SIZE 32 -+#define B44_PHY_ADDR_NO_PHY 30 -+#define B44_MDC_RATIO 5000000 - - /* SW copy of device statistics, kept up to date by periodic timer - * which probes HW values. Must have same relative layout as HW ---- a/include/linux/pci_ids.h -+++ b/include/linux/pci_ids.h -@@ -1765,6 +1765,7 @@ - #define PCI_DEVICE_ID_TIGON3_5901_2 0x170e - #define PCI_DEVICE_ID_BCM4401 0x4401 - #define PCI_DEVICE_ID_BCM4401B0 0x4402 -+#define PCI_DEVICE_ID_BCM4713 0x4713 - - #define PCI_VENDOR_ID_ENE 0x1524 - #define PCI_DEVICE_ID_ENE_1211 0x1211 diff --git a/target/linux/brcm-2.4/patches/009-wrt54g3g_pcmcia.patch b/target/linux/brcm-2.4/patches/009-wrt54g3g_pcmcia.patch deleted file mode 100644 index 81b5ee80c..000000000 --- a/target/linux/brcm-2.4/patches/009-wrt54g3g_pcmcia.patch +++ /dev/null @@ -1,84 +0,0 @@ ---- a/drivers/pcmcia/yenta.c -+++ b/drivers/pcmcia/yenta.c -@@ -543,6 +543,9 @@ static unsigned int yenta_probe_irq(pci_ - * Probe for usable interrupts using the force - * register to generate bogus card status events. - */ -+ -+#ifndef CONFIG_BCM947XX -+ /* WRT54G3G does not like this */ - cb_writel(socket, CB_SOCKET_EVENT, -1); - cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK); - exca_writeb(socket, I365_CSCINT, 0); -@@ -557,7 +560,8 @@ static unsigned int yenta_probe_irq(pci_ - } - cb_writel(socket, CB_SOCKET_MASK, 0); - exca_writeb(socket, I365_CSCINT, 0); -- -+#endif -+ - mask = probe_irq_mask(val) & 0xffff; - - bridge_ctrl &= ~CB_BRIDGE_INTR; -@@ -578,6 +582,12 @@ static void yenta_get_socket_capabilitie - socket->cap.cb_dev = socket->dev; - socket->cap.bus = NULL; - -+#ifdef CONFIG_BCM947XX -+ /* irq mask probing is broken for the WRT54G3G */ -+ if (socket->cap.irq_mask == 0) -+ socket->cap.irq_mask = 0x6f8; -+#endif -+ - printk(KERN_INFO "Yenta ISA IRQ mask 0x%04x, PCI irq %d\n", - socket->cap.irq_mask, socket->cb_irq); - } -@@ -609,6 +619,15 @@ static void yenta_open_bh(void * data) - printk(KERN_INFO "Socket status: %08x\n", - cb_readl(socket, CB_SOCKET_STATE)); - -+ /* Generate an interrupt on card insert/remove */ -+ config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK); -+ -+ /* Set up Multifunction Routing Status Register */ -+ config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */); -+ -+ /* Switch interrupts to parallelized */ -+ config_writeb(socket, 0x92, 0x64); -+ - /* Register it with the pcmcia layer.. */ - cardbus_register(socket); - -@@ -731,7 +750,7 @@ static void yenta_allocate_res(pci_socke - { - struct pci_bus *bus; - struct resource *root, *res; -- u32 start, end; -+ u32 start = 0, end = 0; - u32 align, size, min, max; - unsigned offset; - unsigned mask; -@@ -750,6 +769,15 @@ static void yenta_allocate_res(pci_socke - res->end = 0; - root = pci_find_parent_resource(socket->dev, res); - -+#ifdef CONFIG_BCM947XX -+ /* default mem resources are completely fscked up on the wrt54g3g */ -+ /* bypass the entire resource allocation stuff below and just set it statically */ -+ if (type & IORESOURCE_MEM) { -+ res->start = 0x40004000; -+ res->end = res->start + 0x3fff; -+ } -+ -+#else - if (!root) - return; - -@@ -794,6 +822,7 @@ static void yenta_allocate_res(pci_socke - res->start = res->end = 0; - return; - } -+#endif - - config_writel(socket, offset, res->start); - config_writel(socket, offset+4, res->end); diff --git a/target/linux/brcm-2.4/patches/010-bcm47xx-cam_absent.patch b/target/linux/brcm-2.4/patches/010-bcm47xx-cam_absent.patch deleted file mode 100644 index 18799cbc7..000000000 --- a/target/linux/brcm-2.4/patches/010-bcm47xx-cam_absent.patch +++ /dev/null @@ -1,42 +0,0 @@ ---- a/drivers/net/b44.h -+++ b/drivers/net/b44.h -@@ -122,6 +122,7 @@ - #define RXCONFIG_FLOW 0x00000020 /* Flow Control Enable */ - #define RXCONFIG_FLOW_ACCEPT 0x00000040 /* Accept Unicast Flow Control Frame */ - #define RXCONFIG_RFILT 0x00000080 /* Reject Filter */ -+#define RXCONFIG_CAM_ABSENT 0x00000100 /* CAM Absent */ - #define B44_RXMAXLEN 0x0404UL /* EMAC RX Max Packet Length */ - #define B44_TXMAXLEN 0x0408UL /* EMAC TX Max Packet Length */ - #define B44_MDIO_CTRL 0x0410UL /* EMAC MDIO Control */ ---- a/drivers/net/b44.c -+++ b/drivers/net/b44.c -@@ -1299,6 +1299,7 @@ static int b44_set_mac_addr(struct net_d - { - struct b44 *bp = dev->priv; - struct sockaddr *addr = p; -+ u32 val; - - if (netif_running(dev)) - return -EBUSY; -@@ -1306,7 +1307,11 @@ static int b44_set_mac_addr(struct net_d - memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); - - spin_lock_irq(&bp->lock); -- __b44_set_mac_addr(bp); -+ -+ val = br32(B44_RXCONFIG); -+ if (!(val & RXCONFIG_CAM_ABSENT)) -+ __b44_set_mac_addr(bp); -+ - spin_unlock_irq(&bp->lock); - - return 0; -@@ -1493,7 +1498,7 @@ static void __b44_set_rx_mode(struct net - - val = br32(B44_RXCONFIG); - val &= ~(RXCONFIG_PROMISC | RXCONFIG_ALLMULTI); -- if (dev->flags & IFF_PROMISC) { -+ if ((dev->flags & IFF_PROMISC) || (val & RXCONFIG_CAM_ABSENT)) { - val |= RXCONFIG_PROMISC; - bw32(B44_RXCONFIG, val); - } else { diff --git a/target/linux/brcm-2.4/patches/011-wl_qdisc_war.patch b/target/linux/brcm-2.4/patches/011-wl_qdisc_war.patch deleted file mode 100644 index b2e746a6c..000000000 --- a/target/linux/brcm-2.4/patches/011-wl_qdisc_war.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- a/net/sched/sch_generic.c -+++ b/net/sched/sch_generic.c -@@ -84,6 +84,11 @@ int qdisc_restart(struct net_device *dev - struct sk_buff *skb; - - /* Dequeue packet */ -+ if (!q) { -+ if (net_ratelimit()) -+ printk(KERN_DEBUG "HELP ME! qdisc_restart called, but no Qdisc!\n"); -+ return 0; -+ } - if ((skb = q->dequeue(q)) != NULL) { - if (spin_trylock(&dev->xmit_lock)) { - /* Remember that the driver is grabbed by us. */ diff --git a/target/linux/brcm-2.4/patches/012-aec62xx.patch b/target/linux/brcm-2.4/patches/012-aec62xx.patch deleted file mode 100644 index 7010daf23..000000000 --- a/target/linux/brcm-2.4/patches/012-aec62xx.patch +++ /dev/null @@ -1,100 +0,0 @@ ---- a/drivers/ide/pci/aec62xx.c -+++ b/drivers/ide/pci/aec62xx.c -@@ -3,6 +3,8 @@ - * - * Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org> - * -+ * With Broadcom 4780 patches -+ * - */ - - #include <linux/module.h> -@@ -329,7 +331,11 @@ static int aec62xx_config_drive_xfer_rat - ide_hwif_t *hwif = HWIF(drive); - struct hd_driveid *id = drive->id; - -+#ifndef CONFIG_BCM947XX - if ((id->capability & 1) && drive->autodma) { -+#else -+ if (1) { -+#endif - /* Consult the list of known "bad" drives */ - if (hwif->ide_dma_bad_drive(drive)) - goto fast_ata_pio; -@@ -414,10 +420,60 @@ static unsigned int __init init_chipset_ - { - int bus_speed = system_bus_clock(); - -+#ifndef CONFIG_BCM947XX - if (dev->resource[PCI_ROM_RESOURCE].start) { - pci_write_config_dword(dev, PCI_ROM_ADDRESS, dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE); - printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name, dev->resource[PCI_ROM_RESOURCE].start); - } -+#else -+ if (dev->resource[PCI_ROM_RESOURCE].start) { -+ pci_write_config_dword(dev, PCI_ROM_ADDRESS, -+ dev->resource[PCI_ROM_RESOURCE]. -+ start | PCI_ROM_ADDRESS_ENABLE); -+ } else { -+ pci_write_config_dword(dev, PCI_ROM_ADDRESS, -+ dev->resource[PCI_ROM_RESOURCE]. -+ start); -+ } -+ -+ /* Set IDE controller parameters manually - FIXME: replace magic values */ -+ { -+ byte setting; -+ -+ pci_write_config_word(dev, PCI_COMMAND, 0x0007); -+ //pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x5A); -+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x13); -+ -+ pci_write_config_byte(dev, 0x40, 0x31); -+ pci_write_config_byte(dev, 0x41, 0x31); -+ pci_write_config_byte(dev, 0x42, 0x31); -+ pci_write_config_byte(dev, 0x43, 0x31); -+ // Set IDE Command Speed -+ pci_write_config_byte(dev, 0x48, 0x31); -+ -+ // Disable WriteSubSysID & PIOROM -+ pci_read_config_byte(dev, 0x49, &setting); -+ setting &= 0x07; -+ pci_write_config_byte(dev, 0x49, setting); -+ -+ // Enable PCI burst & INTA & PCI memory read multiple, FIFO threshold=80 -+ pci_read_config_byte(dev, 0x4A, &setting); -+ //setting = (setting & 0xFE) | 0xA8; -+ setting = (setting & 0xFE) | 0xD8; -+ setting = (setting & 0xF7); -+ pci_write_config_byte(dev, 0x4A, setting); -+ -+ //pci_write_config_byte(dev, 0x4B, 0x20); -+ pci_write_config_byte(dev, 0x4B, 0x2C); -+ //pci_write_config_byte(dev, 0x4B, 0x0C); -+ -+ // Set PreRead count: 512 byte -+ pci_write_config_byte(dev, 0x4C, 0); -+ pci_write_config_word(dev, 0x4D, 0x0002); -+ pci_write_config_byte(dev, 0x54, 0); -+ pci_write_config_word(dev, 0x55, 0x0002); -+ } -+#endif - - #if defined(DISPLAY_AEC62XX_TIMINGS) && defined(CONFIG_PROC_FS) - aec_devs[n_aec_devs++] = dev; -@@ -500,6 +556,7 @@ static void __init init_setup_aec62xx (s - - static void __init init_setup_aec6x80 (struct pci_dev *dev, ide_pci_device_t *d) - { -+#ifndef CONFIG_BCM947XX /* Causes OOPS on BCM4780 */ - unsigned long bar4reg = pci_resource_start(dev, 4); - - if (inb(bar4reg+2) & 0x10) { -@@ -512,6 +569,7 @@ static void __init init_setup_aec6x80 (s - strcpy(d->name, "AEC6280R"); - } - -+#endif - ide_setup_pci_device(dev, d); - } - diff --git a/target/linux/brcm-2.4/patches/013-wl_hdd_pdc202xx.patch b/target/linux/brcm-2.4/patches/013-wl_hdd_pdc202xx.patch deleted file mode 100644 index ffe022b58..000000000 --- a/target/linux/brcm-2.4/patches/013-wl_hdd_pdc202xx.patch +++ /dev/null @@ -1,40 +0,0 @@ ---- a/drivers/ide/pci/pdc202xx_old.c -+++ b/drivers/ide/pci/pdc202xx_old.c -@@ -253,23 +253,23 @@ static int pdc202xx_tune_chipset (ide_dr - pci_read_config_byte(dev, (drive_pci)|0x03, &DP); - - if (speed < XFER_SW_DMA_0) { -- if ((AP & 0x0F) || (BP & 0x07)) { -+ if ((AP & 0x0F) || (BP & 0x17)) { - /* clear PIO modes of lower 8421 bits of A Register */ - pci_write_config_byte(dev, (drive_pci), AP &~0x0F); - pci_read_config_byte(dev, (drive_pci), &AP); - - /* clear PIO modes of lower 421 bits of B Register */ -- pci_write_config_byte(dev, (drive_pci)|0x01, BP &~0x07); -+ pci_write_config_byte(dev, (drive_pci)|0x01, BP &~0x17); - pci_read_config_byte(dev, (drive_pci)|0x01, &BP); - - pci_read_config_byte(dev, (drive_pci), &AP); - pci_read_config_byte(dev, (drive_pci)|0x01, &BP); - } - } else { -- if ((BP & 0xF0) && (CP & 0x0F)) { -+ if ((BP & 0xE0) && (CP & 0x0F)) { - /* clear DMA modes of upper 842 bits of B Register */ - /* clear PIO forced mode upper 1 bit of B Register */ -- pci_write_config_byte(dev, (drive_pci)|0x01, BP &~0xF0); -+ pci_write_config_byte(dev, (drive_pci)|0x01, BP &~0xE0); - pci_read_config_byte(dev, (drive_pci)|0x01, &BP); - - /* clear DMA modes of lower 8421 bits of C Register */ -@@ -373,6 +373,9 @@ static int config_chipset_for_dma (ide_d - u8 ultra_66 = ((id->dma_ultra & 0x0010) || - (id->dma_ultra & 0x0008)) ? 1 : 0; - -+ if (hwif->rqsize != 256) -+ hwif->rqsize = 256; -+ - switch(dev->device) { - case PCI_DEVICE_ID_PROMISE_20267: - case PCI_DEVICE_ID_PROMISE_20265: diff --git a/target/linux/brcm-2.4/patches/014-sierra_support.patch b/target/linux/brcm-2.4/patches/014-sierra_support.patch deleted file mode 100644 index f964d0035..000000000 --- a/target/linux/brcm-2.4/patches/014-sierra_support.patch +++ /dev/null @@ -1,1484 +0,0 @@ ---- /dev/null -+++ b/drivers/usb/serial/sierra.c -@@ -0,0 +1,1446 @@ -+/* -+ * Sierra Wireless CDMA Wireless Serial USB drive -+ * -+ * Current Copy modified by: Kevin Lloyd <linux@sierrawireless.com> -+ * Original Copy written by: 2005 Greg Kroah-Hartman <gregkh <at> suse.de> -+ * -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License version -+ * 2 as published by the Free Software Foundation. -+ * -+ * Version history: -+ Version 1.03 (Lloyd): -+ Included support for DTR control and enhanced buffering (should help -+ speed). -+ */ -+ -+#include <linux/config.h> -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/slab.h> -+#include <linux/tty.h> -+#include <linux/tty_driver.h> -+#include <linux/tty_flip.h> -+#include <linux/module.h> -+#include <linux/usb.h> -+#include <linux/mm.h> -+#include <asm/uaccess.h> -+#include <linux/errno.h> -+#include <linux/list.h> -+#include <linux/spinlock.h> -+#include <linux/smp_lock.h> -+ -+#ifdef CONFIG_USB_SERIAL_DEBUG -+ static int debug = 1; -+#else -+ static int debug; -+#endif -+ -+#include "usb-serial.h" -+#include "sierra.h" -+#if defined(CONFIG_USB_SERIAL_PL2303) || defined(CONFIG_USB_SERIAL_PL2303_MODULE) -+#include "pl2303.h" // see /* BEGIN HORRIBLE HACK FOR PL2303 */ below -+#endif -+ -+#define DRIVER_VERSION "v1.03" -+ -+#if 0 -+#define USB_VENDER_REQUEST_SET_DEVICE_POWER_STATE 0 -+ -+#define USB_DEVICE_POWER_STATE_D0 0x0000 -+#define USB_DEVICE_POWER_STATE_D1 0x0001 -+#define USB_DEVICE_POWER_STATE_D2 0x0002 -+#define USB_DEVICE_POWER_STATE_D3 0x0003 -+ -+#define SET_CONTROL_LINE_STATE 0x22 -+/* -+ * Output control lines. -+ */ -+ -+#define ACM_CTRL_DTR 0x01 -+#define ACM_CTRL_RTS 0x02 -+#endif -+ -+//static int sw_attach(struct usb_serial *serial); -+static void sw_usb_serial_generic_shutdown(struct usb_serial *serial); -+ -+static int sw_usb_serial_generic_open(struct usb_serial_port *port, struct file *filp); -+static void sw_usb_serial_generic_close(struct usb_serial_port *port, struct file *filp); -+ -+#if 1 -+/*-----------------------------------------------------------*/ -+static int serial_refcount; -+static struct tty_driver serial_tty_driver; -+static struct tty_struct * serial_tty[SERIAL_TTY_MINORS]; -+static struct termios * serial_termios[SERIAL_TTY_MINORS]; -+static struct termios * serial_termios_locked[SERIAL_TTY_MINORS]; -+static struct usb_serial *serial_table[SERIAL_TTY_MINORS]; /* initially all NULL */ -+ -+static LIST_HEAD(usb_serial_driver_list); -+static struct usb_serial *get_free_serial (int num_ports, int *minor); -+static void generic_write_bulk_callback (struct urb *urb); -+static void * usb_serial_probe(struct usb_device *dev, unsigned int ifnum,const struct usb_device_id *id); -+static void usb_serial_disconnect(struct usb_device *dev, void *ptr); -+static void sw_usb_serial_generic_read_bulk_callback (struct urb *urb); -+static void port_softint(void *private); -+static void return_serial (struct usb_serial *serial); -+static struct usb_serial *get_free_serial (int num_ports, int *minor); -+static int serial_read_proc (char *page, char **start, off_t off, int count, int *eof, void *data); -+/*-----------------------------------------------------------*/ -+ -+#endif -+ -+ -+static struct usb_device_id id_table [] = { -+ { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */ -+ { USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */ -+ { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */ -+ { USB_DEVICE(0x0f30, 0x1b1d) }, /* Sierra Wireless MC5720 */ -+ { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */ -+ { USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */ -+ { USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */ -+ { USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */ -+ { USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U */ -+ { USB_DEVICE(0x1199, 0x0023) }, /* Sierra Wireless C597 */ -+ -+ { USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */ -+ { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */ -+ { USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */ -+ { USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 & AC 875U */ -+ { USB_DEVICE(0x1199, 0x6813) }, /* Sierra Wireless MC8775 (Thinkpad internal) */ -+ { USB_DEVICE(0x1199, 0x6815) }, /* Sierra Wireless MC8775 */ -+ { USB_DEVICE(0x03f0, 0x1e1d) }, /* HP hs2300 a.k.a MC8775 */ -+ { USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */ -+ { USB_DEVICE(0x1199, 0x6821) }, /* Sierra Wireless AirCard 875U */ -+ { USB_DEVICE(0x1199, 0x6832) }, /* Sierra Wireless MC8780*/ -+ { USB_DEVICE(0x1199, 0x6833) }, /* Sierra Wireless MC8781*/ -+ { USB_DEVICE(0x1199, 0x683B) }, /* Sierra Wireless MC8785 Composite*/ -+ { USB_DEVICE(0x1199, 0x6850) }, /* Sierra Wireless AirCard 880 */ -+ { USB_DEVICE(0x1199, 0x6851) }, /* Sierra Wireless AirCard 881 */ -+ { USB_DEVICE(0x1199, 0x6852) }, /* Sierra Wireless AirCard 880 E */ -+ { USB_DEVICE(0x1199, 0x6853) }, /* Sierra Wireless AirCard 881 E */ -+ { USB_DEVICE(0x1199, 0x6855) }, /* Sierra Wireless AirCard 880 U */ -+ { USB_DEVICE(0x1199, 0x6856) }, /* Sierra Wireless AirCard 881 U */ -+ { USB_DEVICE(0x1199, 0x6859) }, /* Sierra Wireless AirCard 885 E */ -+ { USB_DEVICE(0x1199, 0x685A) }, /* Sierra Wireless AirCard 885 E */ -+ -+ { USB_DEVICE(0x1199, 0x6468) }, /* Sierra Wireless MP3G - EVDO */ -+ { USB_DEVICE(0x1199, 0x6469) }, /* Sierra Wireless MP3G - UMTS/HSPA */ -+ -+ { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */ -+ { USB_DEVICE(0x0F3D, 0x0112) }, /* AirPrime/Sierra Wireless PC 5220 */ -+ { USB_DEVICE(0x05C6, 0x6613) }, /* Onda H600/ZTE MF330 */ -+ { } -+}; -+ -+MODULE_DEVICE_TABLE(usb, id_table); -+ -+static struct usb_driver sierra_driver = { -+// .owner = THIS_MODULE, -+ .name = "Sierra wireless", -+ .probe = usb_serial_probe, -+ .disconnect = usb_serial_disconnect, -+ .id_table = id_table, -+}; -+ -+static struct usb_serial_device_type sierra_device = { -+// .driver = { -+ .owner = THIS_MODULE, -+ .name = "Sierra Wireless", -+// }, -+ .id_table = id_table, -+ .num_interrupt_in = NUM_DONT_CARE, -+ .num_bulk_in = NUM_DONT_CARE, -+ .num_bulk_out = NUM_DONT_CARE, -+ .num_ports = 3, -+ //.startup = sw_attach, -+ .shutdown = sw_usb_serial_generic_shutdown, -+ .open = sw_usb_serial_generic_open, -+ .close = sw_usb_serial_generic_close, -+}; -+ -+#define MAX_NUM_PORTS 8 -+ -+/* local function prototypes */ -+static int serial_open (struct tty_struct *tty, struct file * filp); -+static void serial_close (struct tty_struct *tty, struct file * filp); -+static int serial_write (struct tty_struct * tty, int from_user, const unsigned char *buf, int count); -+static int serial_write_room (struct tty_struct *tty); -+static int serial_chars_in_buffer (struct tty_struct *tty); -+static void serial_throttle (struct tty_struct * tty); -+static void serial_unthrottle (struct tty_struct * tty); -+static int serial_ioctl (struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg); -+static void serial_set_termios (struct tty_struct *tty, struct termios * old); -+//static void serial_shutdown (struct usb_serial *serial); -+static void serial_break (struct tty_struct *tty, int break_state); -+static int generic_write (struct usb_serial_port *port, int from_user, const unsigned char *buf, int count); -+static int generic_write_room (struct usb_serial_port *port); -+static void generic_cleanup (struct usb_serial_port *port); -+static int generic_chars_in_buffer (struct usb_serial_port *port); -+//static void generic_shutdown (struct usb_serial *serial); -+ -+#if 1 -+static struct tty_driver serial_tty_driver = { -+ .magic = TTY_DRIVER_MAGIC, -+ .driver_name = "usb-serial", -+#ifndef CONFIG_DEVFS_FS -+ .name = "ttyUSB", -+#else -+ .name = "usb/tts/%d", -+#endif -+ .major = SERIAL_TTY_MAJOR, -+ .minor_start = 0, -+ .num = SERIAL_TTY_MINORS, -+ .type = TTY_DRIVER_TYPE_SERIAL, -+ .subtype = SERIAL_TYPE_NORMAL, -+ .flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS, -+ -+ .refcount = &serial_refcount, -+ .table = serial_tty, -+ .termios = serial_termios, -+ .termios_locked = serial_termios_locked, -+ -+ .open = serial_open, -+ .close = serial_close, -+ .write = serial_write, -+ .write_room = serial_write_room, -+ .ioctl = serial_ioctl, -+ .set_termios = serial_set_termios, -+ .throttle = serial_throttle, -+ .unthrottle = serial_unthrottle, -+ .break_ctl = serial_break, -+ .chars_in_buffer = serial_chars_in_buffer, -+ .read_proc = serial_read_proc, -+}; -+#endif -+ -+ -+/***************************************************************************** -+ * Driver tty interface functions -+ *****************************************************************************/ -+static struct usb_serial *get_serial_by_minor (unsigned int minor) -+{ -+ return serial_table[minor]; -+} -+ -+static int serial_open (struct tty_struct *tty, struct file * filp) -+{ -+ struct usb_serial *serial; -+ struct usb_serial_port *port; -+ unsigned int portNumber; -+ int retval = 0; -+ -+ dbg("%s", __FUNCTION__); -+ -+ /* initialize the pointer incase something fails */ -+ tty->driver_data = NULL; -+ -+ /* get the serial object associated with this tty pointer */ -+ serial = get_serial_by_minor (MINOR(tty->device)); -+ -+ if (serial_paranoia_check (serial, __FUNCTION__)) -+ return -ENODEV; -+ -+ /* set up our port structure making the tty driver remember our port object, and us it */ -+ portNumber = MINOR(tty->device) - serial->minor; -+ port = &serial->port[portNumber]; -+ tty->driver_data = port; -+ -+ down (&port->sem); -+ port->tty = tty; -+ -+ /* lock this module before we call it */ -+ if (serial->type->owner) -+ __MOD_INC_USE_COUNT(serial->type->owner); -+ -+ ++port->open_count; -+ if (port->open_count == 1) { -+ /* only call the device specific open if this -+ * is the first time the port is opened */ -+ if (serial->type->open) -+ retval = serial->type->open(port, filp); -+ else -+ retval = sw_usb_serial_generic_open(port, filp);//@.@ -+ } -+ -+ if (retval) { -+ port->open_count = 0; -+ if (serial->type->owner) -+ __MOD_DEC_USE_COUNT(serial->type->owner); -+ } -+ -+ up (&port->sem); -+ return retval; -+} -+ -+static void __serial_close(struct usb_serial_port *port, struct file *filp) -+{ -+ if (!port->open_count) { -+ dbg ("%s - port not opened", __FUNCTION__); -+ return; -+ } -+ -+ --port->open_count; -+ if (port->open_count <= 0) { -+ /* only call the device specific close if this -+ * port is being closed by the last owner */ -+ if (port->serial->type->close) -+ port->serial->type->close(port, filp); -+ else -+ //generic_close(port, filp); -+ sw_usb_serial_generic_close(port, filp); -+ port->open_count = 0; -+ } -+ -+ if (port->serial->type->owner) -+ __MOD_DEC_USE_COUNT(port->serial->type->owner); -+} -+ -+static void serial_close(struct tty_struct *tty, struct file * filp) -+{ -+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data; -+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__); -+ -+ if (!serial) -+ return; -+ -+ down (&port->sem); -+ -+ dbg("%s - port %d", __FUNCTION__, port->number); -+ -+ /* if disconnect beat us to the punch here, there's nothing to do */ -+ if (tty->driver_data) { -+ __serial_close(port, filp); -+ } -+ -+ up (&port->sem); -+} -+ -+static int serial_write (struct tty_struct * tty, int from_user, const unsigned char *buf, int count) -+{ -+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data; -+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__); -+ int retval = -EINVAL; -+ -+ if (!serial) -+ return -ENODEV; -+ -+ down (&port->sem); -+ -+ dbg("%s - port %d, %d byte(s)", __FUNCTION__, port->number, count); -+ -+ if (!port->open_count) { -+ dbg("%s - port not opened", __FUNCTION__); -+ goto exit; -+ } -+ -+ /* pass on to the driver specific version of this function if it is available */ -+ if (serial->type->write) -+ retval = serial->type->write(port, from_user, buf, count); -+ else -+ retval = generic_write(port, from_user, buf, count); -+ -+exit: -+ up (&port->sem); -+ return retval; -+} -+ -+static int serial_write_room (struct tty_struct *tty) -+{ -+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data; -+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__); -+ int retval = -EINVAL; -+ -+ if (!serial) -+ return -ENODEV; -+ -+ down (&port->sem); -+ -+ dbg("%s - port %d", __FUNCTION__, port->number); -+ -+ if (!port->open_count) { -+ dbg("%s - port not open", __FUNCTION__); -+ goto exit; -+ } -+ -+ /* pass on to the driver specific version of this function if it is available */ -+ if (serial->type->write_room) -+ retval = serial->type->write_room(port); -+ else -+ retval = generic_write_room(port); -+ -+exit: -+ up (&port->sem); -+ return retval; -+} -+ -+static int serial_chars_in_buffer (struct tty_struct *tty) -+{ -+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data; -+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__); -+ int retval = -EINVAL; -+ -+ if (!serial) -+ return -ENODEV; -+ -+ down (&port->sem); -+ -+ dbg("%s = port %d", __FUNCTION__, port->number); -+ -+ if (!port->open_count) { -+ dbg("%s - port not open", __FUNCTION__); -+ goto exit; -+ } -+ -+ /* pass on to the driver specific version of this function if it is available */ -+ if (serial->type->chars_in_buffer) -+ retval = serial->type->chars_in_buffer(port); -+ else -+ retval = generic_chars_in_buffer(port); -+ -+exit: -+ up (&port->sem); -+ return retval; -+} -+ -+static void serial_throttle (struct tty_struct * tty) -+{ -+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data; -+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__); -+ -+ if (!serial) -+ return; -+ -+ down (&port->sem); -+ -+ dbg("%s - port %d", __FUNCTION__, port->number); -+ -+ if (!port->open_count) { -+ dbg ("%s - port not open", __FUNCTION__); -+ goto exit; -+ } -+ -+ /* pass on to the driver specific version of this function */ -+ if (serial->type->throttle) -+ serial->type->throttle(port); -+ -+exit: -+ up (&port->sem); -+} -+ -+static void serial_unthrottle (struct tty_struct * tty) -+{ -+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data; -+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__); -+ -+ if (!serial) -+ return; -+ -+ down (&port->sem); -+ -+ dbg("%s - port %d", __FUNCTION__, port->number); -+ -+ if (!port->open_count) { -+ dbg("%s - port not open", __FUNCTION__); -+ goto exit; -+ } -+ -+ /* pass on to the driver specific version of this function */ -+ if (serial->type->unthrottle) -+ serial->type->unthrottle(port); -+ -+exit: -+ up (&port->sem); -+} -+ -+static int serial_ioctl (struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg) -+{ -+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data; -+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__); -+ int retval = -ENODEV; -+ -+ if (!serial) -+ return -ENODEV; -+ -+ down (&port->sem); -+ -+ dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd); -+ -+ if (!port->open_count) { -+ dbg ("%s - port not open", __FUNCTION__); -+ goto exit; -+ } -+ -+ /* pass on to the driver specific version of this function if it is available */ -+ if (serial->type->ioctl) -+ retval = serial->type->ioctl(port, file, cmd, arg); -+ else -+ retval = -ENOIOCTLCMD; -+ -+exit: -+ up (&port->sem); -+ return retval; -+} -+ -+static void serial_set_termios (struct tty_struct *tty, struct termios * old) -+{ -+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data; -+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__); -+ -+ if (!serial) -+ return; -+ -+ down (&port->sem); -+ -+ dbg("%s - port %d", __FUNCTION__, port->number); -+ -+ if (!port->open_count) { -+ dbg("%s - port not open", __FUNCTION__); -+ goto exit; -+ } -+ -+ /* pass on to the driver specific version of this function if it is available */ -+ if (serial->type->set_termios) -+ serial->type->set_termios(port, old); -+ -+exit: -+ up (&port->sem); -+} -+ -+static void serial_break (struct tty_struct *tty, int break_state) -+{ -+ struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data; -+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__); -+ -+ if (!serial) -+ return; -+ -+ down (&port->sem); -+ -+ dbg("%s - port %d", __FUNCTION__, port->number); -+ -+ if (!port->open_count) { -+ dbg("%s - port not open", __FUNCTION__); -+ goto exit; -+ } -+ -+ /* pass on to the driver specific version of this function if it is available */ -+ if (serial->type->break_ctl) -+ serial->type->break_ctl(port, break_state); -+ -+exit: -+ up (&port->sem); -+} -+#if 0 -+static void serial_shutdown (struct usb_serial *serial) -+{ -+ dbg ("%s", __FUNCTION__); -+ -+ if (serial->type->shutdown) -+ serial->type->shutdown(serial); -+ else -+ generic_shutdown(serial); -+} -+#endif -+static int serial_read_proc (char *page, char **start, off_t off, int count, int *eof, void *data) -+{ -+ struct usb_serial *serial; -+ int length = 0; -+ int i; -+ off_t begin = 0; -+ char tmp[40]; -+ -+ dbg("%s", __FUNCTION__); -+ length += sprintf (page, "usbserinfo:1.0 driver:%s\n", DRIVER_VERSION); -+ for (i = 0; i < SERIAL_TTY_MINORS && length < PAGE_SIZE; ++i) { -+ serial = get_serial_by_minor(i); -+ if (serial == NULL) -+ continue; -+ -+ length += sprintf (page+length, "%d:", i); -+ if (serial->type->owner) -+ length += sprintf (page+length, " module:%s", serial->type->owner->name); -+ length += sprintf (page+length, " name:\"%s\"", serial->type->name); -+ length += sprintf (page+length, " vendor:%04x product:%04x", serial->vendor, serial->product); -+ length += sprintf (page+length, " num_ports:%d", serial->num_ports); -+ length += sprintf (page+length, " port:%d", i - serial->minor + 1); -+ -+ usb_make_path(serial->dev, tmp, sizeof(tmp)); -+ length += sprintf (page+length, " path:%s", tmp); -+ -+ length += sprintf (page+length, "\n"); -+ if ((length + begin) > (off + count)) -+ goto done; -+ if ((length + begin) < off) { -+ begin += length; -+ length = 0; -+ } -+ } -+ *eof = 1; -+done: -+ if (off >= (length + begin)) -+ return 0; -+ *start = page + (off-begin); -+ return ((count < begin+length-off) ? count : begin+length-off); -+} -+ -+ -+/*-----------------------------------------------------------*/ -+static int generic_write (struct usb_serial_port *port, int from_user, const unsigned char *buf, int count) -+{ -+ struct usb_serial *serial = port->serial; -+ int result; -+ -+ dbg("%s - port %d", __FUNCTION__, port->number); -+ -+ if (count == 0) { -+ dbg("%s - write request of 0 bytes", __FUNCTION__); -+ return (0); -+ } -+ -+ /* only do something if we have a bulk out endpoint */ -+ if (serial->num_bulk_out) { -+ if (port->write_urb->status == -EINPROGRESS) { -+ dbg("%s - already writing", __FUNCTION__); -+ return (0); -+ } -+ -+ count = (count > port->bulk_out_size) ? port->bulk_out_size : count; -+ -+ if (from_user) { -+ if (copy_from_user(port->write_urb->transfer_buffer, buf, count)) -+ return -EFAULT; -+ } -+ else { -+ memcpy (port->write_urb->transfer_buffer, buf, count); -+ } -+ -+ usb_serial_debug_data (__FILE__, __FUNCTION__, count, port->write_urb->transfer_buffer); -+ -+ /* set up our urb */ -+ usb_fill_bulk_urb (port->write_urb, serial->dev, -+ usb_sndbulkpipe (serial->dev, -+ port->bulk_out_endpointAddress), -+ port->write_urb->transfer_buffer, count, -+ ((serial->type->write_bulk_callback) ? -+ serial->type->write_bulk_callback : -+ generic_write_bulk_callback), port); -+ -+ /* send the data out the bulk port */ -+ result = usb_submit_urb(port->write_urb); -+ if (result) -+ err("%s - failed submitting write urb, error %d", __FUNCTION__, result); -+ else -+ result = count; -+ -+ return result; -+ } -+ -+ /* no bulk out, so return 0 bytes written */ -+ return (0); -+} -+ -+static int generic_write_room (struct usb_serial_port *port) -+{ -+ struct usb_serial *serial = port->serial; -+ int room = 0; -+ -+ dbg("%s - port %d", __FUNCTION__, port->number); -+ -+ if (serial->num_bulk_out) { -+ if (port->write_urb->status != -EINPROGRESS) -+ room = port->bulk_out_size; -+ } -+ -+ dbg("%s - returns %d", __FUNCTION__, room); -+ return (room); -+} -+ -+static int generic_chars_in_buffer (struct usb_serial_port *port) -+{ -+ struct usb_serial *serial = port->serial; -+ int chars = 0; -+ -+ dbg("%s - port %d", __FUNCTION__, port->number); -+ -+ if (serial->num_bulk_out) { -+ if (port->write_urb->status == -EINPROGRESS) -+ chars = port->write_urb->transfer_buffer_length; -+ } -+ -+ dbg("%s - returns %d", __FUNCTION__, chars); -+ return (chars); -+} -+#if 0 -+static void generic_shutdown (struct usb_serial *serial) -+{ -+ int i; -+ -+ dbg("%s", __FUNCTION__); -+ -+ /* stop reads and writes on all ports */ -+ for (i=0; i < serial->num_ports; ++i) { -+ generic_cleanup (&serial->port[i]); -+ } -+} -+static void generic_cleanup (struct usb_serial_port *port) -+{ -+ struct usb_serial *serial = port->serial; -+ -+ dbg("%s - port %d", __FUNCTION__, port->number); -+ -+ if (serial->dev) { -+ /* shutdown any bulk reads that might be going on */ -+ if (serial->num_bulk_out) -+ usb_unlink_urb (port->write_urb); -+ if (serial->num_bulk_in) -+ usb_unlink_urb (port->read_urb); -+ } -+} -+#endif -+/*----------------------------------------------------------*/ -+static void generic_write_bulk_callback (struct urb *urb) -+{ -+ struct usb_serial_port *port = (struct usb_serial_port *)urb->context; -+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__); -+ -+ dbg("%s - port %d", __FUNCTION__, port->number); -+ -+ if (!serial) { -+ dbg("%s - bad serial pointer, exiting", __FUNCTION__); -+ return; -+ } -+ -+ if (urb->status) { -+ dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status); -+ return; -+ } -+ -+ queue_task(&port->tqueue, &tq_immediate); -+ mark_bh(IMMEDIATE_BH); -+ -+ return; -+} -+ -+static struct usb_serial *get_free_serial (int num_ports, int *minor) -+{ -+ struct usb_serial *serial = NULL; -+ int i, j; -+ int good_spot; -+ -+ dbg("%s %d", __FUNCTION__, num_ports); -+ -+ *minor = 0; -+ for (i = 0; i < SERIAL_TTY_MINORS; ++i) { -+ if (serial_table[i]) -+ continue; -+ -+ good_spot = 1; -+ for (j = 1; j <= num_ports-1; ++j) -+ if (serial_table[i+j]) -+ good_spot = 0; -+ if (good_spot == 0) -+ continue; -+ -+ if (!(serial = kmalloc(sizeof(struct usb_serial), GFP_KERNEL))) { -+ err("%s - Out of memory", __FUNCTION__); -+ return NULL; -+ } -+ memset(serial, 0, sizeof(struct usb_serial)); -+ serial->magic = USB_SERIAL_MAGIC; -+ serial_table[i] = serial; -+ *minor = i; -+ dbg("%s - minor base = %d", __FUNCTION__, *minor); -+ for (i = *minor+1; (i < (*minor + num_ports)) && (i < SERIAL_TTY_MINORS); ++i) -+ serial_table[i] = serial; -+ return serial; -+ } -+ return NULL; -+} -+ -+static void return_serial (struct usb_serial *serial) -+{ -+ int i; -+ -+ dbg("%s", __FUNCTION__); -+ -+ if (serial == NULL) -+ return; -+ -+ for (i = 0; i < serial->num_ports; ++i) { -+ serial_table[serial->minor + i] = NULL; -+ } -+ -+ return; -+} -+ -+static void port_softint(void *private) -+{ -+ struct usb_serial_port *port = (struct usb_serial_port *)private; -+ struct usb_serial *serial = get_usb_serial (port, __FUNCTION__); -+ struct tty_struct *tty; -+ -+ dbg("%s - port %d", __FUNCTION__, port->number); -+ -+ if (!serial) -+ return; -+ -+ tty = port->tty; -+ if (!tty) -+ return; -+ -+ if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && tty->ldisc.write_wakeup) { -+ dbg("%s - write wakeup call.", __FUNCTION__); -+ (tty->ldisc.write_wakeup)(tty); -+ } -+ -+ wake_up_interruptible(&tty->write_wait); -+} -+ -+ -+static void * usb_serial_probe(struct usb_device *dev, unsigned int ifnum, -+ const struct usb_device_id *id) -+{ -+ struct usb_serial *serial = NULL; -+ struct usb_serial_port *port; -+ struct usb_interface *interface; -+ struct usb_interface_descriptor *iface_desc; -+ struct usb_endpoint_descriptor *endpoint; -+ struct usb_endpoint_descriptor *interrupt_in_endpoint[MAX_NUM_PORTS]; -+ struct usb_endpoint_descriptor *bulk_in_endpoint[MAX_NUM_PORTS]; -+ struct usb_endpoint_descriptor *bulk_out_endpoint[MAX_NUM_PORTS]; -+ struct usb_serial_device_type *type = NULL; -+ struct list_head *tmp; -+ int found; -+ int minor; -+ int buffer_size; -+ int i; -+ int num_interrupt_in = 0; -+ int num_bulk_in = 0; -+ int num_bulk_out = 0; -+ int num_ports; -+ int max_endpoints; -+ const struct usb_device_id *id_pattern = NULL; -+ -+ /* loop through our list of known serial converters, and see if this -+ device matches. */ -+ found = 0; -+ interface = &dev->actconfig->interface[ifnum]; -+ list_for_each (tmp, &usb_serial_driver_list) { -+ type = list_entry(tmp, struct usb_serial_device_type, driver_list); -+ id_pattern = usb_match_id(dev, interface, type->id_table); -+ if (id_pattern != NULL) { -+ dbg("descriptor matches"); -+ found = 1; -+ break; -+ } -+ } -+ if (!found) { -+ /* no match */ -+ dbg("none matched"); -+ return(NULL); -+ } -+ /* descriptor matches, let's find the endpoints needed */ -+ /* check out the endpoints */ -+ iface_desc = &interface->altsetting[0]; -+ for (i = 0; i < iface_desc->bNumEndpoints; ++i) { -+ endpoint = &iface_desc->endpoint[i]; -+ -+ if ((endpoint->bEndpointAddress & 0x80) && -+ ((endpoint->bmAttributes & 3) == 0x02)) { -+ /* we found a bulk in endpoint */ -+ dbg("found bulk in"); -+ bulk_in_endpoint[num_bulk_in] = endpoint; -+ ++num_bulk_in; -+ } -+ -+ if (((endpoint->bEndpointAddress & 0x80) == 0x00) && -+ ((endpoint->bmAttributes & 3) == 0x02)) { -+ /* we found a bulk out endpoint */ -+ dbg("found bulk out"); -+ bulk_out_endpoint[num_bulk_out] = endpoint; -+ ++num_bulk_out; -+ } -+ -+ if ((endpoint->bEndpointAddress & 0x80) && -+ ((endpoint->bmAttributes & 3) == 0x03)) { -+ /* we found a interrupt in endpoint */ -+ dbg("found interrupt in"); -+ interrupt_in_endpoint[num_interrupt_in] = endpoint; -+ ++num_interrupt_in; -+ } -+ } -+ -+#if defined(CONFIG_USB_SERIAL_PL2303) || defined(CONFIG_USB_SERIAL_PL2303_MODULE) -+ /* BEGIN HORRIBLE HACK FOR PL2303 */ -+ /* this is needed due to the looney way its endpoints are set up */ -+ if (((dev->descriptor.idVendor == PL2303_VENDOR_ID) && -+ (dev->descriptor.idProduct == PL2303_PRODUCT_ID)) || -+ ((dev->descriptor.idVendor == ATEN_VENDOR_ID) && -+ (dev->descriptor.idProduct == ATEN_PRODUCT_ID))) { -+ if (ifnum == 1) { -+ /* check out the endpoints of the other interface*/ -+ interface = &dev->actconfig->interface[ifnum ^ 1]; -+ iface_desc = &interface->altsetting[0]; -+ for (i = 0; i < iface_desc->bNumEndpoints; ++i) { -+ endpoint = &iface_desc->endpoint[i]; -+ if ((endpoint->bEndpointAddress & 0x80) && -+ ((endpoint->bmAttributes & 3) == 0x03)) { -+ /* we found a interrupt in endpoint */ -+ dbg("found interrupt in for Prolific device on separate interface"); -+ interrupt_in_endpoint[num_interrupt_in] = endpoint; -+ ++num_interrupt_in; -+ } -+ } -+ } -+ -+ /* Now make sure the PL-2303 is configured correctly. -+ * If not, give up now and hope this hack will work -+ * properly during a later invocation of usb_serial_probe -+ */ -+ if (num_bulk_in == 0 || num_bulk_out == 0) { -+ info("PL-2303 hack: descriptors matched but endpoints did not"); -+ return NULL; -+ } -+ } -+ /* END HORRIBLE HACK FOR PL2303 */ -+#endif -+ -+ /* found all that we need */ -+ info("%s converter detected", type->name); -+ -+#ifdef CONFIG_USB_SERIAL_SIERRAWIRELESS -+ if (type == &sierra_driver) { -+ num_ports = num_bulk_out; -+ if (num_ports == 0) { -+ err("Sierra 3G device with no bulk out, not allowed."); -+ return NULL; -+ } -+ } else -+#endif -+ num_ports = type->num_ports; -+ -+ serial = get_free_serial (num_ports, &minor); -+ if (serial == NULL) { -+ err("No more free serial devices"); -+ return NULL; -+ } -+ -+ serial->dev = dev; -+ serial->type = type; -+ serial->interface = interface; -+ serial->minor = minor; -+ serial->num_ports = num_ports; -+ serial->num_bulk_in = num_bulk_in; -+ serial->num_bulk_out = num_bulk_out; -+ serial->num_interrupt_in = num_interrupt_in; -+ serial->vendor = dev->descriptor.idVendor; -+ serial->product = dev->descriptor.idProduct; -+ -+ /* set up the endpoint information */ -+ for (i = 0; i < num_bulk_in; ++i) { -+ endpoint = bulk_in_endpoint[i]; -+ port = &serial->port[i]; -+ port->read_urb = usb_alloc_urb (0); -+ if (!port->read_urb) { -+ err("No free urbs available"); -+ goto probe_error; -+ } -+//Amin marked buffer_size = endpoint->wMaxPacketSize; -+// ===> 20060310 Amin modify for improve EVDO and HSDPA Card -+ buffer_size = 2048; -+ printk("KERNEL DEBUG => USBSERIAL.O buffer_size = 2048\n"); -+// <=== 20060310 Amin modify for improve EVDO and HSDPA Card -+ port->bulk_in_endpointAddress = endpoint->bEndpointAddress; -+ port->bulk_in_buffer = kmalloc (buffer_size, GFP_KERNEL); -+ if (!port->bulk_in_buffer) { -+ err("Couldn't allocate bulk_in_buffer"); -+ goto probe_error; -+ } -+ usb_fill_bulk_urb (port->read_urb, dev, -+ usb_rcvbulkpipe (dev, -+ endpoint->bEndpointAddress), -+ port->bulk_in_buffer, buffer_size, -+ ((serial->type->read_bulk_callback) ? -+ serial->type->read_bulk_callback : -+ sw_usb_serial_generic_read_bulk_callback), -+ port); -+ } -+ -+ for (i = 0; i < num_bulk_out; ++i) { -+ endpoint = bulk_out_endpoint[i]; -+ port = &serial->port[i]; -+ port->write_urb = usb_alloc_urb(0); -+ if (!port->write_urb) { -+ err("No free urbs available"); -+ goto probe_error; -+ } -+ buffer_size = endpoint->wMaxPacketSize; -+ port->bulk_out_size = buffer_size; -+ port->bulk_out_endpointAddress = endpoint->bEndpointAddress; -+ port->bulk_out_buffer = kmalloc (buffer_size, GFP_KERNEL); -+ if (!port->bulk_out_buffer) { -+ err("Couldn't allocate bulk_out_buffer"); -+ goto probe_error; -+ } -+ usb_fill_bulk_urb (port->write_urb, dev, -+ usb_sndbulkpipe (dev, -+ endpoint->bEndpointAddress), -+ port->bulk_out_buffer, buffer_size, -+ ((serial->type->write_bulk_callback) ? -+ serial->type->write_bulk_callback : -+ generic_write_bulk_callback), -+ port); -+ } -+ -+ for (i = 0; i < num_interrupt_in; ++i) { -+ endpoint = interrupt_in_endpoint[i]; -+ port = &serial->port[i]; -+ port->interrupt_in_urb = usb_alloc_urb(0); -+ if (!port->interrupt_in_urb) { -+ err("No free urbs available"); -+ goto probe_error; -+ } -+ buffer_size = endpoint->wMaxPacketSize; -+ port->interrupt_in_endpointAddress = endpoint->bEndpointAddress; -+ port->interrupt_in_buffer = kmalloc (buffer_size, GFP_KERNEL); -+ if (!port->interrupt_in_buffer) { -+ err("Couldn't allocate interrupt_in_buffer"); -+ goto probe_error; -+ } -+ usb_fill_int_urb (port->interrupt_in_urb, dev, -+ usb_rcvintpipe (dev, -+ endpoint->bEndpointAddress), -+ port->interrupt_in_buffer, buffer_size, -+ serial->type->read_int_callback, port, -+ endpoint->bInterval); -+ } -+ -+ /* initialize some parts of the port structures */ -+ /* we don't use num_ports here cauz some devices have more endpoint pairs than ports */ -+ max_endpoints = max(num_bulk_in, num_bulk_out); -+ max_endpoints = max(max_endpoints, num_interrupt_in); -+ max_endpoints = max(max_endpoints, (int)serial->num_ports); -+ dbg("%s - setting up %d port structures for this device", __FUNCTION__, max_endpoints); -+ for (i = 0; i < max_endpoints; ++i) { -+ port = &serial->port[i]; -+ port->number = i + serial->minor; -+ port->serial = serial; -+ port->magic = USB_SERIAL_PORT_MAGIC; -+ port->tqueue.routine = port_softint; -+ port->tqueue.data = port; -+ init_MUTEX (&port->sem); -+ } -+ -+ /* if this device type has a startup function, call it */ -+ if (type->startup) { -+ i = type->startup (serial); -+ if (i < 0) -+ goto probe_error; -+ if (i > 0) -+ return serial; -+ } -+ -+ /* initialize the devfs nodes for this device and let the user know what ports we are bound to */ -+ for (i = 0; i < serial->num_ports; ++i) { -+ tty_register_devfs (&serial_tty_driver, 0, serial->port[i].number); -+ info("%s converter now attached to ttyUSB%d (or usb/tts/%d for devfs)", -+ type->name, serial->port[i].number, serial->port[i].number); -+ } -+ -+ return serial; /* success */ -+ -+ -+probe_error: -+ for (i = 0; i < num_bulk_in; ++i) { -+ port = &serial->port[i]; -+ if (port->read_urb) -+ usb_free_urb (port->read_urb); -+ if (port->bulk_in_buffer) -+ kfree (port->bulk_in_buffer); -+ } -+ for (i = 0; i < num_bulk_out; ++i) { -+ port = &serial->port[i]; -+ if (port->write_urb) -+ usb_free_urb (port->write_urb); -+ if (port->bulk_out_buffer) -+ kfree (port->bulk_out_buffer); -+ } -+ for (i = 0; i < num_interrupt_in; ++i) { -+ port = &serial->port[i]; -+ if (port->interrupt_in_urb) -+ usb_free_urb (port->interrupt_in_urb); -+ if (port->interrupt_in_buffer) -+ kfree (port->interrupt_in_buffer); -+ } -+ -+ /* return the minor range that this device had */ -+ return_serial (serial); -+ -+ /* free up any memory that we allocated */ -+ kfree (serial); -+ return NULL; -+} -+ -+static void usb_serial_disconnect(struct usb_device *dev, void *ptr) -+{ -+ struct usb_serial *serial = (struct usb_serial *) ptr; -+ struct usb_serial_port *port; -+ int i; -+ -+ dbg ("%s", __FUNCTION__); -+ if (serial) { -+ /* fail all future close/read/write/ioctl/etc calls */ -+ for (i = 0; i < serial->num_ports; ++i) { -+ port = &serial->port[i]; -+ down (&port->sem); -+ if (port->tty != NULL) { -+ while (port->open_count > 0) { -+ //__serial_close(port, NULL); -+ sw_usb_serial_generic_close(port,NULL); -+ } -+ port->tty->driver_data = NULL; -+ } -+ up (&port->sem); -+ } -+ -+ serial->dev = NULL; -+ //serial_shutdown (serial); -+ sw_usb_serial_generic_shutdown(serial); -+ -+ for (i = 0; i < serial->num_ports; ++i) -+ serial->port[i].open_count = 0; -+ -+ for (i = 0; i < serial->num_bulk_in; ++i) { -+ port = &serial->port[i]; -+ if (port->read_urb) { -+ usb_unlink_urb (port->read_urb); -+ usb_free_urb (port->read_urb); -+ } -+ if (port->bulk_in_buffer) -+ kfree (port->bulk_in_buffer); -+ } -+ for (i = 0; i < serial->num_bulk_out; ++i) { -+ port = &serial->port[i]; -+ if (port->write_urb) { -+ usb_unlink_urb (port->write_urb); -+ usb_free_urb (port->write_urb); -+ } -+ if (port->bulk_out_buffer) -+ kfree (port->bulk_out_buffer); -+ } -+ for (i = 0; i < serial->num_interrupt_in; ++i) { -+ port = &serial->port[i]; -+ if (port->interrupt_in_urb) { -+ usb_unlink_urb (port->interrupt_in_urb); -+ usb_free_urb (port->interrupt_in_urb); -+ } -+ if (port->interrupt_in_buffer) -+ kfree (port->interrupt_in_buffer); -+ } -+ -+ for (i = 0; i < serial->num_ports; ++i) { -+ tty_unregister_devfs (&serial_tty_driver, serial->port[i].number); -+ info("%s converter now disconnected from ttyUSB%d", serial->type->name, serial->port[i].number); -+ } -+ -+ /* return the minor range that this device had */ -+ return_serial (serial); -+ -+ /* free up any memory that we allocated */ -+ kfree (serial); -+ -+ } else { -+ info("device disconnected"); -+ } -+ -+} -+ -+#if 0 -+static int sw_attach(struct usb_serial *serial) -+{ -+ struct usb_device *hdev = serial->dev; -+ int rc; -+ -+ dbg("%s - serial(0x%p)", __FUNCTION__, serial); -+ -+ rc = usb_control_msg( -+ hdev, -+ usb_sndctrlpipe(hdev, 0), -+ USB_VENDER_REQUEST_SET_DEVICE_POWER_STATE, /* bRequest */ -+ USB_TYPE_VENDOR|USB_RECIP_DEVICE, /* bmRequestType */ -+ USB_DEVICE_POWER_STATE_D0, /* wValue */ -+ 0, /* wIndex */ -+ NULL, /* Data */ -+ 0, /* wLength */ -+ 1000); /* Timeout */ -+ -+ err("%s - rc(%d)", __FUNCTION__, rc); -+ return rc; -+} -+#endif -+//void sw_usb_serial_generic_read_bulk_callback (struct urb *urb, struct pt_regs *regs) -+static void sw_usb_serial_generic_read_bulk_callback (struct urb *urb) -+{ -+ struct usb_serial_port *port = (struct usb_serial_port *)urb->context; -+ struct usb_serial *serial = port->serial; -+ struct tty_struct *tty; -+ unsigned char *data = urb->transfer_buffer; -+ int result; -+ int i; -+ -+ dbg("%s - port %d", __FUNCTION__, port->number); -+ -+ if (urb->status) { -+ dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status); -+ return; -+ } -+ -+ //usb_serial_dbg_data(__FILE__, __FUNCTION__, urb->actual_length, data); -+ -+ tty = port->tty; -+ if (tty && urb->actual_length) { -+ #if 0 -+ tty_buffer_request_room(tty, urb->actual_length); -+ tty_insert_flip_string(tty, data, urb->actual_length); -+ tty_flip_buffer_push(tty); -+ #endif -+ #if 1 -+ for (i = 0; i < urb->actual_length ; ++i) { -+ /* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */ -+ if(tty->flip.count >= TTY_FLIPBUF_SIZE) { -+ tty_flip_buffer_push(tty); -+ } -+ /* this doesn't actually push the data through unless tty->low_latency is set */ -+ tty_insert_flip_char(tty, data[i], 0); -+ } -+ tty_flip_buffer_push(tty); -+ #endif -+ -+ } -+ else -+ dbg("%s: empty read urb received", __FUNCTION__); -+ -+ /* Continue trying to always read */ -+ usb_fill_bulk_urb (port->read_urb, serial->dev, -+ usb_rcvbulkpipe (serial->dev, -+ port->bulk_in_endpointAddress), -+ port->read_urb->transfer_buffer, -+ port->read_urb->transfer_buffer_length, -+ ((serial->type->read_bulk_callback) ? -+ serial->type->read_bulk_callback : -+ sw_usb_serial_generic_read_bulk_callback), port); -+ result = usb_submit_urb(port->read_urb); -+ //result = usb_submit_urb(port->read_urb, GFP_ATOMIC); //for kernel 2.6 -+ if (result) -+ dbg("%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result); -+} -+#if 1 -+static int generic_open (struct usb_serial_port *port, struct file *filp) -+{ -+ struct usb_serial *serial = port->serial; -+ int result = 0; -+ -+ dbg("%s - port %d", __FUNCTION__, port->number); -+ -+ /* force low_latency on so that our tty_push actually forces the data through, -+ otherwise it is scheduled, and with high data rates (like with OHCI) data -+ can get lost. */ -+ if (port->tty) -+ port->tty->low_latency = 1; -+ -+ /* if we have a bulk interrupt, start reading from it */ -+ if (serial->num_bulk_in) { -+ /* Start reading from the device */ -+ usb_fill_bulk_urb (port->read_urb, serial->dev, -+ usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress), -+ port->read_urb->transfer_buffer, -+ port->read_urb->transfer_buffer_length, -+ ((serial->type->read_bulk_callback) ? -+ serial->type->read_bulk_callback : -+ sw_usb_serial_generic_read_bulk_callback), -+ port); -+ result = usb_submit_urb(port->read_urb); //, GFP_KERNEL); -+ if (result) -+ //dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result); -+ dbg("%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result); -+ -+ } -+ -+ return result; -+} -+#endif -+int sw_usb_serial_generic_open (struct usb_serial_port *port, struct file *filp) -+{ -+ int rc; -+ struct usb_serial *serial = port->serial; -+ struct usb_device *hdev = serial->dev; -+ -+ dbg("%s - port %d", __FUNCTION__, port->number); -+ -+ rc = generic_open(port, filp); -+ err("%s - rc(%d)", __FUNCTION__, rc); -+ -+ if(0 == rc) -+ { -+ rc = usb_control_msg( -+ hdev, -+ usb_sndctrlpipe(hdev, 0), -+ SET_CONTROL_LINE_STATE, /* bRequest */ -+ USB_TYPE_CLASS|USB_RECIP_INTERFACE, /* bmRequestType */ -+ ACM_CTRL_DTR|ACM_CTRL_RTS, /* wValue */ -+ 0, /* wIndex */ -+ NULL, /* Data */ -+ 0, /* wLength */ -+ 1000); /* Timeout */ -+ err("%s - usb_control_msg: rc(%d)", __FUNCTION__, rc); -+ } -+ -+ return rc; -+} -+ -+static void generic_cleanup (struct usb_serial_port *port) -+{ -+ struct usb_serial *serial = port->serial; -+ -+ dbg("%s - port %d", __FUNCTION__, port->number); -+ -+ if (serial->dev) { -+ /* shutdown any bulk reads that might be going on */ -+ if (serial->num_bulk_out) -+ usb_unlink_urb(port->write_urb); -+ //usb_kill_urb(port->write_urb); -+ if (serial->num_bulk_in) -+ usb_unlink_urb(port->read_urb); -+ //usb_kill_urb(port->read_urb); -+ } -+} -+ -+static void sw_usb_serial_generic_close (struct usb_serial_port *port, struct file * filp) -+{ -+ int rc; -+ struct usb_serial *serial = port->serial; -+ struct usb_device *hdev = serial->dev; -+ -+ dbg("%s - port %d", __FUNCTION__, port->number); -+ -+ rc = usb_control_msg( -+ hdev, -+ usb_sndctrlpipe(hdev, 0), -+ SET_CONTROL_LINE_STATE, /* bRequest */ -+ USB_TYPE_CLASS|USB_RECIP_INTERFACE, /* bmRequestType */ -+ 0, /* wValue */ -+ 0, /* wIndex */ -+ NULL, /* Data */ -+ 0, /* wLength */ -+ 1000); /* Timeout */ -+ err("%s - rc(%d)", __FUNCTION__, rc); -+ -+ generic_cleanup (port); -+} -+ -+static void sw_usb_serial_generic_shutdown(struct usb_serial *serial) -+{ -+ int i, rc; -+ struct usb_device *hdev = serial->dev; -+ -+ dbg("%s serial(0x%p)", __FUNCTION__, serial); -+ -+ if(hdev) -+ { -+ rc = usb_control_msg( -+ hdev, -+ usb_sndctrlpipe(hdev, 0), -+ USB_VENDER_REQUEST_SET_DEVICE_POWER_STATE, /* bRequest */ -+ USB_TYPE_VENDOR|USB_RECIP_DEVICE, /* bmRequestType */ -+ USB_DEVICE_POWER_STATE_D3, /* wValue */ -+ 0, /* wIndex */ -+ NULL, /* Data */ -+ 0, /* wLength */ -+ 1000); /* Timeout */ -+ err("%s - rc(%d)", __FUNCTION__, rc); -+ } -+ -+ /* stop reads and writes on all ports */ -+ for (i=0; i < serial->num_ports; ++i) { -+ generic_cleanup(&serial->port[i]); -+ } -+} -+int usb_serial_register(struct usb_serial_device_type *new_device) -+{ -+ /* Add this device to our list of devices */ -+ list_add(&new_device->driver_list, &usb_serial_driver_list); -+ -+ info ("USB Serial support registered for %s", new_device->name); -+ -+ usb_scan_devices(); -+ -+ return 0; -+} -+ -+ -+void usb_serial_deregister(struct usb_serial_device_type *device) -+{ -+ struct usb_serial *serial; -+ int i; -+ -+ info("USB Serial deregistering driver %s", device->name); -+ -+ /* clear out the serial_table if the device is attached to a port */ -+ for(i = 0; i < SERIAL_TTY_MINORS; ++i) { -+ serial = serial_table[i]; -+ if ((serial != NULL) && (serial->type == device)) { -+ usb_driver_release_interface (&sierra_driver, serial->interface); -+ usb_serial_disconnect (NULL, serial); -+ } -+ } -+ -+ list_del(&device->driver_list); -+} -+ -+static int __init sierra_init(void) -+{ -+ int retval; -+ int i; -+ -+ /* Initalize our global data */ -+ for (i = 0; i < SERIAL_TTY_MINORS; ++i) { -+ serial_table[i] = NULL; -+ } -+ -+ /* register the tty driver */ -+ serial_tty_driver.init_termios = tty_std_termios; -+ serial_tty_driver.init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; -+ if (tty_register_driver (&serial_tty_driver)) { -+ err("%s - failed to register tty driver", __FUNCTION__); -+ return -1; -+ } -+ -+ retval = usb_serial_register(&sierra_device); -+ if (retval) -+ { -+ tty_unregister_driver(&serial_tty_driver); -+ printk("%s return usb_serial_register. retval=[%d].\n",__FUNCTION__, retval); -+ return retval; -+ } -+ retval = usb_register(&sierra_driver); -+ if (retval){ -+ usb_serial_deregister(&sierra_device); -+ tty_unregister_driver(&serial_tty_driver); -+ err("usb_register failed for the Sierra 3G USB-Serial driver. Error number %d\n", retval); -+ return -1; -+ } -+ -+ return retval; -+} -+ -+static void __exit sierra_exit(void) -+{ -+ usb_deregister(&sierra_driver); -+ usb_serial_deregister(&sierra_device); -+} -+ -+module_init(sierra_init); -+module_exit(sierra_exit); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/drivers/usb/serial/sierra.h -@@ -0,0 +1,32 @@ -+/* -+ * Sierra Wireless CDMA Wireless Serial USB drive -+ * -+ * Current Copy modified by: Kevin Lloyd <linux@sierrawireless.com> -+ * Original Copy written by: 2005 Greg Kroah-Hartman <gregkh <at> suse.de> -+ * -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License version -+ * 2 as published by the Free Software Foundation. -+ * -+ * Version history: -+ Version 1.03 (Lloyd): -+ Included support for DTR control and enhanced buffering (should help -+ speed). -+ */ -+ -+#define USB_VENDER_REQUEST_SET_DEVICE_POWER_STATE 0 -+ -+#define USB_DEVICE_POWER_STATE_D0 0x0000 -+#define USB_DEVICE_POWER_STATE_D1 0x0001 -+#define USB_DEVICE_POWER_STATE_D2 0x0002 -+#define USB_DEVICE_POWER_STATE_D3 0x0003 -+ -+#define SET_CONTROL_LINE_STATE 0x22 -+/* -+ * Output control lines. -+ */ -+ -+#define ACM_CTRL_DTR 0x01 -+#define ACM_CTRL_RTS 0x02 -+ diff --git a/target/linux/brcm-2.4/patches/015-sierra_kconfig.patch b/target/linux/brcm-2.4/patches/015-sierra_kconfig.patch deleted file mode 100644 index 6b6ca6a34..000000000 --- a/target/linux/brcm-2.4/patches/015-sierra_kconfig.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/drivers/usb/serial/Config.in -+++ b/drivers/usb/serial/Config.in -@@ -39,6 +39,7 @@ if [ "$CONFIG_USB_SERIAL" != "n" ]; then - dep_tristate ' USB KOBIL chipcard reader (EXPERIMENTAL)' CONFIG_USB_SERIAL_KOBIL_SCT $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL - dep_tristate ' USB Prolific 2303 Single Port Serial Driver' CONFIG_USB_SERIAL_PL2303 $CONFIG_USB_SERIAL - dep_tristate ' USB REINER SCT cyberJack pinpad/e-com chipcard reader (EXPERIMENTAL)' CONFIG_USB_SERIAL_CYBERJACK $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL -+ dep_tristate ' USB Sierra Wireless Driver' CONFIG_USB_SERIAL_SIERRAWIRELESS $CONFIG_USB_SERIAL - dep_tristate ' USB Xircom / Entregra Single Port Serial Driver (EXPERIMENTAL)' CONFIG_USB_SERIAL_XIRCOM $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL - dep_tristate ' USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)' CONFIG_USB_SERIAL_OMNINET $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL - fi ---- a/drivers/usb/serial/Makefile -+++ b/drivers/usb/serial/Makefile -@@ -26,6 +26,7 @@ obj-$(CONFIG_USB_SERIAL_CYBERJACK) += c - obj-$(CONFIG_USB_SERIAL_IR) += ir-usb.o - obj-$(CONFIG_USB_SERIAL_KLSI) += kl5kusb105.o - obj-$(CONFIG_USB_SERIAL_KOBIL_SCT) += kobil_sct.o -+obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS) += sierra.o - - # Objects that export symbols. - export-objs := usbserial.o diff --git a/target/linux/brcm-2.4/patches/016-fuse-ntfs-3g-mips.patch b/target/linux/brcm-2.4/patches/016-fuse-ntfs-3g-mips.patch deleted file mode 100644 index c1031a339..000000000 --- a/target/linux/brcm-2.4/patches/016-fuse-ntfs-3g-mips.patch +++ /dev/null @@ -1,30 +0,0 @@ ---- a/arch/mips/mm/c-r4k.c -+++ b/arch/mips/mm/c-r4k.c -@@ -325,7 +325,7 @@ static void r4k_flush_cache_mm(struct mm - r4k_blast_scache(); - } - --static void r4k_flush_cache_page(struct vm_area_struct *vma, -+void r4k_flush_cache_page(struct vm_area_struct *vma, - unsigned long page) - { - int exec = vma->vm_flags & VM_EXEC; -@@ -385,6 +385,7 @@ static void r4k_flush_cache_page(struct - r4k_blast_icache_page_indexed(page); - } - } -+EXPORT_SYMBOL(r4k_flush_cache_page); - - static void r4k_flush_data_cache_page(unsigned long addr) - { ---- a/arch/mips/mm/Makefile -+++ b/arch/mips/mm/Makefile -@@ -11,7 +11,7 @@ USE_STANDARD_AS_RULE := true - O_TARGET := mm.o - - export-objs := cache.o ioremap.o loadmmu.o remap.o \ -- tlb-r4k.o tlb-sb1.o -+ tlb-r4k.o tlb-sb1.o c-r4k.o - obj-y += cache.o extable.o init.o ioremap.o fault.o \ - loadmmu.o - diff --git a/target/linux/brcm-2.4/patches/100-wl_config.patch b/target/linux/brcm-2.4/patches/100-wl_config.patch deleted file mode 100644 index 4870c4c1e..000000000 --- a/target/linux/brcm-2.4/patches/100-wl_config.patch +++ /dev/null @@ -1,66 +0,0 @@ ---- a/include/linux/netdevice.h -+++ b/include/linux/netdevice.h -@@ -445,16 +445,12 @@ struct net_device - /* bridge stuff */ - struct net_bridge_port *br_port; - --#ifdef CONFIG_NET_FASTROUTE - #define NETDEV_FASTROUTE_HMASK 0xF - /* Semi-private data. Keep it at the end of device struct. */ - rwlock_t fastpath_lock; - struct dst_entry *fastpath[NETDEV_FASTROUTE_HMASK+1]; --#endif --#ifdef CONFIG_NET_DIVERT - /* this will get initialized at each interface type init routine */ - struct divert_blk *divert; --#endif /* CONFIG_NET_DIVERT */ - }; - - /* 2.6 compatibility */ ---- a/include/linux/skbuff.h -+++ b/include/linux/skbuff.h -@@ -83,7 +83,6 @@ - #define NET_CALLER(arg) __builtin_return_address(0) - #endif - --#ifdef CONFIG_NETFILTER - struct nf_conntrack { - atomic_t use; - void (*destroy)(struct nf_conntrack *); -@@ -92,7 +91,6 @@ struct nf_conntrack { - struct nf_ct_info { - struct nf_conntrack *master; - }; --#endif - #if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE) - struct nf_info; - #endif -@@ -201,7 +199,6 @@ struct sk_buff { - unsigned char *end; /* End pointer */ - - void (*destructor)(struct sk_buff *); /* Destruct function */ --#ifdef CONFIG_NETFILTER - /* Can be used for communication between hooks. */ - unsigned long nfmark; - /* Cache info */ -@@ -211,7 +208,6 @@ struct sk_buff { - #ifdef CONFIG_NETFILTER_DEBUG - unsigned int nf_debug; - #endif --#endif /*CONFIG_NETFILTER*/ - - #if defined(CONFIG_HIPPI) - union{ -@@ -219,12 +215,8 @@ struct sk_buff { - } private; - #endif - --#ifdef CONFIG_NET_SCHED - __u32 tc_index; /* traffic control index */ --#endif --#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE) - struct nf_info *nf_info; --#endif - }; - - #ifdef __KERNEL__ diff --git a/target/linux/brcm-2.4/patches/110-b44_alignment.patch b/target/linux/brcm-2.4/patches/110-b44_alignment.patch deleted file mode 100644 index 1f6e975b8..000000000 --- a/target/linux/brcm-2.4/patches/110-b44_alignment.patch +++ /dev/null @@ -1,103 +0,0 @@ ---- a/drivers/net/b44.c -+++ b/drivers/net/b44.c -@@ -101,7 +101,8 @@ static int instance = 0; - (BP)->tx_cons - (BP)->tx_prod - TX_RING_GAP(BP)) - #define NEXT_TX(N) (((N) + 1) & (B44_TX_RING_SIZE - 1)) - --#define RX_PKT_BUF_SZ (1536 + bp->rx_offset + 64) -+#define RX_HEADER_OFS (RX_HEADER_LEN + 2) -+#define RX_PKT_BUF_SZ (1536 + RX_HEADER_OFS) - - /* minimum number of free TX descriptors required to wake up TX process */ - #define B44_TX_WAKEUP_THRESH (B44_TX_RING_SIZE / 4) -@@ -734,10 +735,8 @@ static int b44_alloc_rx_skb(struct b44 * - mapping = pci_map_single(bp->pdev, skb->data, - RX_PKT_BUF_SZ, - PCI_DMA_FROMDEVICE); -- skb_reserve(skb, bp->rx_offset); - -- rh = (struct rx_header *) -- (skb->data - bp->rx_offset); -+ rh = (struct rx_header *) skb->data; - rh->len = 0; - rh->flags = 0; - -@@ -747,13 +746,13 @@ static int b44_alloc_rx_skb(struct b44 * - if (src_map != NULL) - src_map->skb = NULL; - -- ctrl = (DESC_CTRL_LEN & (RX_PKT_BUF_SZ - bp->rx_offset)); -+ ctrl = (DESC_CTRL_LEN & RX_PKT_BUF_SZ); - if (dest_idx == (B44_RX_RING_SIZE - 1)) - ctrl |= DESC_CTRL_EOT; - - dp = &bp->rx_ring[dest_idx]; - dp->ctrl = cpu_to_le32(ctrl); -- dp->addr = cpu_to_le32((u32) mapping + bp->rx_offset + bp->dma_offset); -+ dp->addr = cpu_to_le32((u32) mapping + bp->dma_offset); - - return RX_PKT_BUF_SZ; - } -@@ -812,7 +811,7 @@ static int b44_rx(struct b44 *bp, int bu - PCI_DMA_FROMDEVICE); - rh = (struct rx_header *) skb->data; - len = cpu_to_le16(rh->len); -- if ((len > (RX_PKT_BUF_SZ - bp->rx_offset)) || -+ if ((len > (RX_PKT_BUF_SZ - RX_HEADER_OFS)) || - (rh->flags & cpu_to_le16(RX_FLAG_ERRORS))) { - drop_it: - b44_recycle_rx(bp, cons, bp->rx_prod); -@@ -844,8 +843,8 @@ static int b44_rx(struct b44 *bp, int bu - pci_unmap_single(bp->pdev, map, - skb_size, PCI_DMA_FROMDEVICE); - /* Leave out rx_header */ -- skb_put(skb, len+bp->rx_offset); -- skb_pull(skb,bp->rx_offset); -+ skb_put(skb, len+RX_HEADER_OFS); -+ skb_pull(skb,RX_HEADER_OFS); - } else { - struct sk_buff *copy_skb; - -@@ -858,7 +857,7 @@ static int b44_rx(struct b44 *bp, int bu - skb_reserve(copy_skb, 2); - skb_put(copy_skb, len); - /* DMA sync done above, copy just the actual packet */ -- memcpy(copy_skb->data, skb->data+bp->rx_offset, len); -+ memcpy(copy_skb->data, skb->data+RX_HEADER_OFS, len); - - skb = copy_skb; - } -@@ -1344,7 +1343,7 @@ static void b44_init_hw(struct b44 *bp) - bw32(B44_DMATX_CTRL, DMATX_CTRL_ENABLE); - bw32(B44_DMATX_ADDR, bp->tx_ring_dma + bp->dma_offset); - bw32(B44_DMARX_CTRL, (DMARX_CTRL_ENABLE | -- (bp->rx_offset << DMARX_CTRL_ROSHIFT))); -+ (RX_HEADER_OFS << DMARX_CTRL_ROSHIFT))); - bw32(B44_DMARX_ADDR, bp->rx_ring_dma + bp->dma_offset); - - bw32(B44_DMARX_PTR, bp->rx_pending); -@@ -1873,13 +1872,7 @@ static int __devinit b44_get_invariants( - bp->mdc_port = (eeprom[90] >> 14) & 0x1; - } - -- /* With this, plus the rx_header prepended to the data by the -- * hardware, we'll land the ethernet header on a 2-byte boundary. -- */ -- bp->rx_offset = 30; -- - bp->imask = IMASK_DEF; -- - bp->core_unit = ssb_core_unit(bp); - - /* XXX - really required? ---- a/drivers/net/b44.h -+++ b/drivers/net/b44.h -@@ -518,8 +518,6 @@ struct b44 { - #define B44_FLAG_ADV_100FULL 0x08000000 - #define B44_FLAG_INTERNAL_PHY 0x10000000 - -- u32 rx_offset; -- - u32 msg_enable; - - struct timer_list timer; diff --git a/target/linux/brcm-2.4/patches/200-fix_ipv6_receiving_with_ipv4_socket.patch b/target/linux/brcm-2.4/patches/200-fix_ipv6_receiving_with_ipv4_socket.patch deleted file mode 100644 index 8d836c2ec..000000000 --- a/target/linux/brcm-2.4/patches/200-fix_ipv6_receiving_with_ipv4_socket.patch +++ /dev/null @@ -1,18 +0,0 @@ ---- a/net/ipv4/udp.c 2009-12-26 00:06:59.000000000 +0100 -+++ b/net/ipv4/udp.c 2009-12-27 00:27:05.003012266 +0100 -@@ -711,7 +711,14 @@ - skb = skb_recv_datagram(sk, flags, noblock, &err); - if (!skb) - goto out; -- -+ -+ if (skb->nh.iph->version != 4) { -+ skb_free_datagram(sk, skb); -+ if (noblock) -+ return -EAGAIN; -+ goto try_again; -+ } -+ - copied = skb->len - sizeof(struct udphdr); - if (copied > len) { - copied = len; |