diff options
Diffstat (limited to 'target/linux/brcm-2.4/base-files')
12 files changed, 0 insertions, 461 deletions
diff --git a/target/linux/brcm-2.4/base-files/etc/diag.sh b/target/linux/brcm-2.4/base-files/etc/diag.sh deleted file mode 100644 index 3b08554c6..000000000 --- a/target/linux/brcm-2.4/base-files/etc/diag.sh +++ /dev/null @@ -1,28 +0,0 @@ -#!/bin/sh -# Copyright (C) 2006 OpenWrt.org - -set_led() { - local led="$1" - local state="$2" - [ -f "/proc/diag/led/$1" ] && echo "$state" > "/proc/diag/led/$1" -} - -set_state() { - case "$1" in - preinit) - set_led dmz 1 - set_led diag 1 - set_led power 0 - ;; - failsafe) - set_led diag f - set_led power f - set_led dmz f - ;; - done) - set_led dmz 0 - set_led diag 0 - set_led power 1 - ;; - esac -} diff --git a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig deleted file mode 100755 index d7839b6b4..000000000 --- a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig +++ /dev/null @@ -1,248 +0,0 @@ -#!/bin/sh /etc/rc.common -# Copyright (C) 2006 OpenWrt.org - -START=05 - -start() { - [ -e /etc/config/network ] && { - local batch - - config_cb() { - case "$1" in - switch) - option_cb() { - case "$1" in - vlan[0-9]|vlan1[0-5]) - local id="${1#vlan}" - local ports="${2%\*}" - append batch "delete network.eth0.${1}${N}" - append batch "set network.eth0_${id}=switch_vlan${N}" - append batch "set network.eth0_${id}.device=eth0${N}" - append batch "set network.eth0_${id}.vlan=${id}${N}" - append batch "set network.eth0_${id}.ports='${ports}'${N}" - ;; - esac - } - ;; - switch_vlan) - option_cb() { :; } - batch="" - ;; - esac - } - - config_load network - - [ -n "$batch" ] && { - logger -t netconfig "migrating switch config to new format ..." - echo "$batch${N}commit network" | uci batch - } - - exit 0 - } - - mkdir -p /etc/config - - ( - if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then - # WGT634u - echo boardtype=wgt634u - else - strings "$(find_mtd_part nvram)" - fi - ) | awk ' - function p(cfgname, name) { - if (c[name] != "") print " option " cfgname " \"" c[name] "\"" - } - - function vlan(id, name) { - if (c[name] != "") { - print "config switch_vlan eth0_" id - print " option device \"eth0\"" - print " option vlan " id - print " option ports \"" c[name] "\"" - print "" - } - } - - function macinc(mac, maca, i, result) { - split(mac, maca, ":") - for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i] - if (++maca[6] > 0xff) { - maca[5]++ - maca[6] = 0 - } - for (i = 1; i <= 6; i++) { - if (i != 1) result = result ":" - result = result sprintf("%02x", maca[i]) - } - return result - } - - BEGIN { - FS="=" - c["lan_ifname"]="eth0.0" - c["wan_ifname"]="eth0.1" - c["vlan0ports"]="1 2 3 4 5" - c["vlan1ports"]="0 5" - getline < "/proc/diag/model" - model=$0 - for (i = 0; i < 6; i++) { - if (mac_check != "") mac_check = mac_check ":" - mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]" - } - } - - ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) { - nvram[$1] = $2 - } - - END { - if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) { - c["wan_ifname"] = "" - c["lan_ifname"] = "eth1" - } - if (model == "ASUS WL-330gE") { - c["wan_ifname"] = "" - c["lan_ifname"] = "eth0" - c["vlan0ports"] = "" - c["vlan1ports"] = "" - } - if ((model == "ASUS WL-500g") || (model == "Microsoft MN-700")) { - c["wan_ifname"] = "eth1" - c["lan_ifname"] = "eth0" - } - if ((model == "ASUS WL-500g Premium V2") || (model == "Dell TrueMobile 2300 v2") || (model == "Buffalo WHR-G125")) { - c["vlan0ports"] = "0 1 2 3 5" - c["vlan1ports"] = "4 5" - } - if (model == "Dell TrueMobile 2300") { - c["lan_ifname"] = "eth0" - c["wan_ifname"] = "eth1" - c["vlan0ports"] = "0 1 2 3 4 5u" - c["vlan1ports"] = "" - } - if (nvram["boardtype"] == "bcm94710r4") { - # Toshiba WRC-1000 - c["lan_ifname"] = "eth0" - c["wan_ifname"] = "eth1" - } - if ((nvram["boardtype"] == "wgt634u") || (nvram["boardtype"] == "0x0467")) { - c["vlan0ports"] = "0 1 2 3 5" - c["vlan1ports"] = "4 5" - } - if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) { - if (nvram["boardnum"] == "45") { - # WL-500gP - c["vlan0ports"] = "1 2 3 4 5" - c["vlan1ports"] = "0 5" - } else { - # Generic BCM94704 - c["vlan0ports"] = "0 1 2 3 4 5u" - c["vlan1ports"] = "" - c["lan_ifname"] = "eth0" - c["wan_ifname"] = "eth1" - - # MAC addresses on 4704 tend to be screwed up. Add a workaround here - if (nvram["et0macaddr"] ~ mac_check) { - c["lan_macaddr"] = nvram["et0macaddr"] - c["wan_macaddr"] = macinc(c["lan_macaddr"]) - } - } - } - # Buffalo WBR-B11 and Buffalo WBR-G54 - if (nvram["boardtype"] == "bcm94710ap") { - c["vlan0ports"] = "0 1 2 3 4 5u" - c["vlan1ports"] = "" - c["lan_ifname"] = "eth0" - c["wan_ifname"] = "eth1" - } - # generic broadcom 4705/4785 processor with 5397 switch? - # EXCEPT Linksys WRT300N V1.1 - if ((nvram["boardtype"] == "0x478") && \ - (model != "Linksys WRT300N V1.1")) { - c["vlan0ports"] = "1 2 3 4 8*" - c["vlan1ports"] = "0 8" - } - - # WAP54G - if ((nvram["boardnum"] == "2") || \ - (nvram["boardnum"] == "1024")) { - c["lan_ifname"]="eth0" - c["wan_ifname"]="" - } - - # Sitecom WL-105b - if ((nvram["boardum"] == "2") && \ - (nvram["GemtekPmonVer"] == "1")) { - c["lan_ifname"]="eth0" - c["wan_ifname"]="" - } - - # ASUS WL-700gE - # These are actually same as defaults above. For some reason this script applies - # Generic BCM94704 settings instead so we revert to proper settings here. - # Hopefully someone will fix this properly soon. - if (model == "ASUS WL-700gE") { - c["lan_ifname"]="eth0.0" - c["wan_ifname"]="eth0.1" - c["vlan0ports"]="1 2 3 4 5" - c["vlan1ports"]="0 5" - } - - if (model == "Motorola WR850G V2/V3") { - c["vlan0ports"]="0 1 2 3 5" - c["vlan1ports"]="4 5" - } - if (model == "ASUS WL-500W") { - c["lan_ifname"] = "eth0" - c["wan_ifname"] = "eth1" - c["vlan0ports"] = "0 1 2 3 4 5u" - c["vlan1ports"] = "" - } - if (model == "OvisLink WL-1600GL") { - c["lan_ifname"] = "eth0.0" - c["wan_ifname"] = "eth0.1" - c["vlan0ports"] = "0 1 2 3 5" - c["vlan1ports"] = "4 5" - } - - if (c["vlan0ports"] || c["vlan1ports"]) { - print "#### VLAN configuration " - print "config switch eth0" - print " option enable 1" - print "" - vlan(0, "vlan0ports") - vlan(1, "vlan1ports") - } - print "#### Loopback configuration" - print "config interface loopback" - print " option ifname \"lo\"" - print " option proto static" - print " option ipaddr 127.0.0.1" - print " option netmask 255.0.0.0" - print "" - print "" - print "#### LAN configuration" - print "config interface lan" - print " option type bridge" - p("ifname", "lan_ifname") - p("macaddr", "lan_macaddr") - print " option proto static" - print " option ipaddr 192.168.1.1" - print " option netmask 255.255.255.0" - print "" - print "" - if (c["wan_ifname"]) { - print "#### WAN configuration" - print "config interface wan" - p("ifname", "wan_ifname") - p("macaddr", "wan_macaddr") - print " option proto dhcp" - } else { - print "#### WAN configuration (disabled)" - print "#config interface wan" - print "# option proto dhcp" - } - }' > /etc/config/network -} diff --git a/target/linux/brcm-2.4/base-files/etc/init.d/wmacfixup b/target/linux/brcm-2.4/base-files/etc/init.d/wmacfixup deleted file mode 100755 index ee1b75220..000000000 --- a/target/linux/brcm-2.4/base-files/etc/init.d/wmacfixup +++ /dev/null @@ -1,33 +0,0 @@ -#!/bin/sh /etc/rc.common -# Copyright (C) 2010 OpenWrt.org - -START=41 - -boot() { - [ -d /sys/class/ieee80211 ] || exit - - commit=0 - - fixup_wmac() { - local cfg="$1" - local cfmac - - config_get cfmac "$cfg" macaddr - - [ "$cfmac" != "00:90:4c:5f:00:2a" ] || { - local nvmac="$(nvram get il0macaddr 2>/dev/null)" - [ -n "$nvmac" ] && [ "$nvmac != "$cfmac ] && { - uci set wireless.$cfg.macaddr="$nvmac" - commit=1 - } - } - } - - config_load wireless - config_foreach fixup_wmac wifi-device - - [ "$commit" = 1 ] && uci commit wireless -} - -start() { :; } -stop() { :; } diff --git a/target/linux/brcm-2.4/base-files/lib/preinit/03_init_hotplug_failsafe_brcm b/target/linux/brcm-2.4/base-files/lib/preinit/03_init_hotplug_failsafe_brcm deleted file mode 100644 index b0f4a4efa..000000000 --- a/target/linux/brcm-2.4/base-files/lib/preinit/03_init_hotplug_failsafe_brcm +++ /dev/null @@ -1,9 +0,0 @@ -#!/bin/sh - -init_hotplug_failsafe() { - echo '/sbin/hotplug.failsafe' > /proc/sys/kernel/hotplug -} - -boot_hook_add preinit_main init_hotplug_failsafe - - diff --git a/target/linux/brcm-2.4/base-files/lib/preinit/05_init_interfaces_brcm b/target/linux/brcm-2.4/base-files/lib/preinit/05_init_interfaces_brcm deleted file mode 100644 index 3cd760e2d..000000000 --- a/target/linux/brcm-2.4/base-files/lib/preinit/05_init_interfaces_brcm +++ /dev/null @@ -1,37 +0,0 @@ -#!/bin/sh - -set_preinit_iface() { - ifname=eth0 - - insmod diag - - # hardware specific overrides - case "$(cat /proc/diag/model)" in - "Linksys WAP54G V1") ifname=eth1;; - "ASUS WL-HDD") ifname=eth1;; - "ASUS WL-300g") ifname=eth1;; - "ASUS (unknown, BCM4702)") ifname=eth1;; - "Sitecom WL-105b") ifname=eth1;; - esac - ifconfig $ifname 0.0.0.0 up -} - -check_module () { - module="$1"; shift; params="$*" - - insmod "$module" "$params" - sleep 1 - grep "^$module" /proc/modules - return $? -} - -init_iface() { - check_module tg3 - insmod switch-core - check_module switch-robo || check_module switch-adm || { - check_module bcm57xx activate_gpio=0x4 && cpu_port="8u*" - } || rmmod switch-core -} - -boot_hook_add preinit_main set_preinit_iface -boot_hook_add preinit_main init_iface diff --git a/target/linux/brcm-2.4/base-files/lib/preinit/05_set_failsafe_switch_brcm b/target/linux/brcm-2.4/base-files/lib/preinit/05_set_failsafe_switch_brcm deleted file mode 100644 index a93559f97..000000000 --- a/target/linux/brcm-2.4/base-files/lib/preinit/05_set_failsafe_switch_brcm +++ /dev/null @@ -1,15 +0,0 @@ -#!/bin/sh - -failsafe_ip() { - [ -d /proc/switch/eth0 ] && [ "$ifname" = "eth0" ] && { - ifconfig eth0 0.0.0.0 down - echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports - } - - [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && { - ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up - } -} - -boot_hook_add failsafe failsafe_ip - diff --git a/target/linux/brcm-2.4/base-files/lib/preinit/15_mount_proc_brcm b/target/linux/brcm-2.4/base-files/lib/preinit/15_mount_proc_brcm deleted file mode 100644 index fd5add16a..000000000 --- a/target/linux/brcm-2.4/base-files/lib/preinit/15_mount_proc_brcm +++ /dev/null @@ -1,6 +0,0 @@ -#!/bin/sh - -do_mount_procfs() { - mount none /proc -t proc -} - diff --git a/target/linux/brcm-2.4/base-files/lib/preinit/15_set_preinit_interface_brcm b/target/linux/brcm-2.4/base-files/lib/preinit/15_set_preinit_interface_brcm deleted file mode 100644 index fdc7c71ca..000000000 --- a/target/linux/brcm-2.4/base-files/lib/preinit/15_set_preinit_interface_brcm +++ /dev/null @@ -1,39 +0,0 @@ -#!/bin/sh - -port_net_echo() { - [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && { - if [ "$pi_preinit_net_messages" = "y" ] || [ "$pi_failsafe_net_message" = "true" ] && [ "$pi_preinit_no_failsafe_netmsg" != "y" ]; then - netmsg $pi_broadcast "$1" - fi - } -} - -preinit_ip_deconfig() { - if [ -z "$pi_ifname" ]; then - ifconfig $ifname 0.0.0.0 down - else - grep -q "$pi_ifname" /proc/net/dev && { - ifconfig $pi_ifname 0.0.0.0 down - } - fi -} - -preinit_net_echo() { - preinit_ip - - [ -d /proc/switch/eth0 ] && [ "$pi_ifname" = "eth0" ] && { - echo 1 > /proc/switch/eth0/reset - - # this would be easier if we blasted the message across all ports - # but we don't want packets leaking across interfaces - for port in $(seq 0 4); do { - echo "$port ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports - port_net_echo $1 - }; done - - echo "0 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports - - } || port_net_echo $1 -} - - diff --git a/target/linux/brcm-2.4/base-files/lib/preinit/20_failsafe_net_echo_brcm b/target/linux/brcm-2.4/base-files/lib/preinit/20_failsafe_net_echo_brcm deleted file mode 100644 index f030cb283..000000000 --- a/target/linux/brcm-2.4/base-files/lib/preinit/20_failsafe_net_echo_brcm +++ /dev/null @@ -1,12 +0,0 @@ -#!/bin/sh - -indicate_failsafe() { - preinit_net_echo() { - port_net_echo $1 - } - echo "- failsafe -" - preinit_net_echo "Entering Failsafe!\n" - indicate_failsafe_led -} - - diff --git a/target/linux/brcm-2.4/base-files/lib/preinit/20_failsafe_set_boot_wait_brcm b/target/linux/brcm-2.4/base-files/lib/preinit/20_failsafe_set_boot_wait_brcm deleted file mode 100644 index da721b848..000000000 --- a/target/linux/brcm-2.4/base-files/lib/preinit/20_failsafe_set_boot_wait_brcm +++ /dev/null @@ -1,14 +0,0 @@ -#!/bin/sh - -. /etc/functions.sh - -set_boot_wait() { - [ -x "/usr/sbin/nvram" ] && { - [ "$(nvram get boot_wait)" != "on" ] && { - nvram set boot_wait=on - nvram commit - } - } -} - -boot_hook_add failsafe set_boot_wait diff --git a/target/linux/brcm-2.4/base-files/lib/upgrade/platform.sh b/target/linux/brcm-2.4/base-files/lib/upgrade/platform.sh deleted file mode 100644 index 9921cf571..000000000 --- a/target/linux/brcm-2.4/base-files/lib/upgrade/platform.sh +++ /dev/null @@ -1,16 +0,0 @@ -PART_NAME=linux - -platform_check_image() { - [ "$ARGC" -gt 1 ] && return 1 - - case "$(get_magic_word "$1")" in - # .trx files - 4844) return 0;; - *) - echo "Invalid image type. Please use only .trx files" - return 1 - ;; - esac -} - -# use default for platform_do_upgrade() diff --git a/target/linux/brcm-2.4/base-files/sbin/hotplug.failsafe b/target/linux/brcm-2.4/base-files/sbin/hotplug.failsafe deleted file mode 100755 index 0544339de..000000000 --- a/target/linux/brcm-2.4/base-files/sbin/hotplug.failsafe +++ /dev/null @@ -1,4 +0,0 @@ -#!/bin/sh -case "$1" in - button) kill -USR1 1;; -esac |