summaryrefslogtreecommitdiffstats
path: root/target/linux/atheros-2.6/files/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/atheros-2.6/files/drivers/net')
-rw-r--r--target/linux/atheros-2.6/files/drivers/net/ar2313/Makefile5
-rw-r--r--target/linux/atheros-2.6/files/drivers/net/ar2313/ar2313.c1457
-rw-r--r--target/linux/atheros-2.6/files/drivers/net/ar2313/ar2313.h193
-rw-r--r--target/linux/atheros-2.6/files/drivers/net/ar2313/dma.h142
4 files changed, 0 insertions, 1797 deletions
diff --git a/target/linux/atheros-2.6/files/drivers/net/ar2313/Makefile b/target/linux/atheros-2.6/files/drivers/net/ar2313/Makefile
deleted file mode 100644
index 9eb63e46b..000000000
--- a/target/linux/atheros-2.6/files/drivers/net/ar2313/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the AR2313 ethernet driver
-#
-
-obj-$(CONFIG_AR2313) += ar2313.o
diff --git a/target/linux/atheros-2.6/files/drivers/net/ar2313/ar2313.c b/target/linux/atheros-2.6/files/drivers/net/ar2313/ar2313.c
deleted file mode 100644
index 735ceebd9..000000000
--- a/target/linux/atheros-2.6/files/drivers/net/ar2313/ar2313.c
+++ /dev/null
@@ -1,1457 +0,0 @@
-/*
- * ar2313.c: Linux driver for the Atheros AR231x Ethernet device.
- *
- * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
- * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
- * Copyright (C) 2006-2007 Felix Fietkau <nbd@openwrt.org>
- *
- * Thanks to Atheros for providing hardware and documentation
- * enabling me to write this driver.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Additional credits:
- * This code is taken from John Taylor's Sibyte driver and then
- * modified for the AR2313.
- */
-
-#include <linux/autoconf.h>
-#include <linux/module.h>
-#include <linux/version.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/mm.h>
-#include <linux/highmem.h>
-#include <linux/sockios.h>
-#include <linux/pkt_sched.h>
-#include <linux/compile.h>
-#include <linux/mii.h>
-#include <linux/ethtool.h>
-#include <linux/ctype.h>
-#include <linux/platform_device.h>
-
-#include <net/sock.h>
-#include <net/ip.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/byteorder.h>
-#include <asm/uaccess.h>
-#include <asm/bootinfo.h>
-
-#define AR2313_MTU 1692
-#define AR2313_PRIOS 1
-#define AR2313_QUEUES (2*AR2313_PRIOS)
-#define AR2313_DESCR_ENTRIES 64
-
-#undef INDEX_DEBUG
-#define DEBUG 0
-#define DEBUG_TX 0
-#define DEBUG_RX 0
-#define DEBUG_INT 0
-#define DEBUG_MC 0
-#define DEBUG_ERR 1
-
-#ifndef min
-#define min(a,b) (((a)<(b))?(a):(b))
-#endif
-
-#ifndef SMP_CACHE_BYTES
-#define SMP_CACHE_BYTES L1_CACHE_BYTES
-#endif
-
-#define AR2313_MBOX_SET_BIT 0x8
-
-#define BOARD_IDX_STATIC 0
-#define BOARD_IDX_OVERFLOW -1
-
-#include "dma.h"
-#include "ar2313.h"
-
-/*
- * New interrupt handler strategy:
- *
- * An old interrupt handler worked using the traditional method of
- * replacing an skbuff with a new one when a packet arrives. However
- * the rx rings do not need to contain a static number of buffer
- * descriptors, thus it makes sense to move the memory allocation out
- * of the main interrupt handler and do it in a bottom half handler
- * and only allocate new buffers when the number of buffers in the
- * ring is below a certain threshold. In order to avoid starving the
- * NIC under heavy load it is however necessary to force allocation
- * when hitting a minimum threshold. The strategy for alloction is as
- * follows:
- *
- * RX_LOW_BUF_THRES - allocate buffers in the bottom half
- * RX_PANIC_LOW_THRES - we are very low on buffers, allocate
- * the buffers in the interrupt handler
- * RX_RING_THRES - maximum number of buffers in the rx ring
- *
- * One advantagous side effect of this allocation approach is that the
- * entire rx processing can be done without holding any spin lock
- * since the rx rings and registers are totally independent of the tx
- * ring and its registers. This of course includes the kmalloc's of
- * new skb's. Thus start_xmit can run in parallel with rx processing
- * and the memory allocation on SMP systems.
- *
- * Note that running the skb reallocation in a bottom half opens up
- * another can of races which needs to be handled properly. In
- * particular it can happen that the interrupt handler tries to run
- * the reallocation while the bottom half is either running on another
- * CPU or was interrupted on the same CPU. To get around this the
- * driver uses bitops to prevent the reallocation routines from being
- * reentered.
- *
- * TX handling can also be done without holding any spin lock, wheee
- * this is fun! since tx_csm is only written to by the interrupt
- * handler.
- */
-
-/*
- * Threshold values for RX buffer allocation - the low water marks for
- * when to start refilling the rings are set to 75% of the ring
- * sizes. It seems to make sense to refill the rings entirely from the
- * intrrupt handler once it gets below the panic threshold, that way
- * we don't risk that the refilling is moved to another CPU when the
- * one running the interrupt handler just got the slab code hot in its
- * cache.
- */
-#define RX_RING_SIZE AR2313_DESCR_ENTRIES
-#define RX_PANIC_THRES (RX_RING_SIZE/4)
-#define RX_LOW_THRES ((3*RX_RING_SIZE)/4)
-#define CRC_LEN 4
-#define RX_OFFSET 2
-
-#define AR2313_BUFSIZE (AR2313_MTU + ETH_HLEN + CRC_LEN + RX_OFFSET)
-
-#ifdef MODULE
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Sameer Dekate <sdekate@arubanetworks.com>, Imre Kaloz <kaloz@openwrt.org>, Felix Fietkau <nbd@openwrt.org>");
-MODULE_DESCRIPTION("AR2313 Ethernet driver");
-#endif
-
-#define virt_to_phys(x) ((u32)(x) & 0x1fffffff)
-
-// prototypes
-static short armiiread(struct net_device *dev, short phy, short reg);
-static void armiiwrite(struct net_device *dev, short phy, short reg,
- short data);
-#ifdef TX_TIMEOUT
-static void ar2313_tx_timeout(struct net_device *dev);
-#endif
-static void ar2313_halt(struct net_device *dev);
-static void rx_tasklet_func(unsigned long data);
-static void ar2313_multicast_list(struct net_device *dev);
-
-#ifndef ERR
-#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
-#endif
-
-
-int __init ar2313_probe(struct platform_device *pdev)
-{
- struct net_device *dev;
- struct ar2313_private *sp;
- struct resource *res;
- unsigned long ar_eth_base;
- char buf[64];
-
- dev = alloc_etherdev(sizeof(struct ar2313_private));
-
- if (dev == NULL) {
- printk(KERN_ERR
- "ar2313: Unable to allocate net_device structure!\n");
- return -ENOMEM;
- }
-
- SET_MODULE_OWNER(dev);
- platform_set_drvdata(pdev, dev);
-
- sp = dev->priv;
- sp->dev = dev;
- sp->cfg = pdev->dev.platform_data;
-
- sprintf(buf, "eth%d_membase", pdev->id);
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, buf);
- if (!res)
- return -ENODEV;
-
- sp->link = 0;
- ar_eth_base = res->start;
- sp->phy = sp->cfg->phy;
-
- sprintf(buf, "eth%d_irq", pdev->id);
- dev->irq = platform_get_irq_byname(pdev, buf);
-
- spin_lock_init(&sp->lock);
-
- /* initialize func pointers */
- dev->open = &ar2313_open;
- dev->stop = &ar2313_close;
- dev->hard_start_xmit = &ar2313_start_xmit;
-
- dev->get_stats = &ar2313_get_stats;
- dev->set_multicast_list = &ar2313_multicast_list;
-#ifdef TX_TIMEOUT
- dev->tx_timeout = ar2313_tx_timeout;
- dev->watchdog_timeo = AR2313_TX_TIMEOUT;
-#endif
- dev->do_ioctl = &ar2313_ioctl;
-
- // SAMEER: do we need this?
- dev->features |= NETIF_F_SG | NETIF_F_HIGHDMA;
-
- tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long) dev);
- tasklet_disable(&sp->rx_tasklet);
-
- sp->eth_regs =
- ioremap_nocache(virt_to_phys(ar_eth_base), sizeof(*sp->eth_regs));
- if (!sp->eth_regs) {
- printk("Can't remap eth registers\n");
- return (-ENXIO);
- }
-
- /*
- * When there's only one MAC, PHY regs are typically on ENET0,
- * even though the MAC might be on ENET1.
- * Needto remap PHY regs separately in this case
- */
- if (virt_to_phys(ar_eth_base) == virt_to_phys(sp->phy_regs))
- sp->phy_regs = sp->eth_regs;
- else {
- sp->phy_regs =
- ioremap_nocache(virt_to_phys(sp->cfg->phy_base),
- sizeof(*sp->phy_regs));
- if (!sp->phy_regs) {
- printk("Can't remap phy registers\n");
- return (-ENXIO);
- }
- }
-
- sp->dma_regs =
- ioremap_nocache(virt_to_phys(ar_eth_base + 0x1000),
- sizeof(*sp->dma_regs));
- dev->base_addr = (unsigned int) sp->dma_regs;
- if (!sp->dma_regs) {
- printk("Can't remap DMA registers\n");
- return (-ENXIO);
- }
-
- sp->int_regs = ioremap_nocache(virt_to_phys(sp->cfg->reset_base), 4);
- if (!sp->int_regs) {
- printk("Can't remap INTERRUPT registers\n");
- return (-ENXIO);
- }
-
- strncpy(sp->name, "Atheros AR231x", sizeof(sp->name) - 1);
- sp->name[sizeof(sp->name) - 1] = '\0';
- memcpy(dev->dev_addr, sp->cfg->macaddr, 6);
- sp->board_idx = BOARD_IDX_STATIC;
-
- if (ar2313_init(dev)) {
- /*
- * ar2313_init() calls ar2313_init_cleanup() on error.
- */
- kfree(dev);
- return -ENODEV;
- }
-
- if (register_netdev(dev)) {
- printk("%s: register_netdev failed\n", __func__);
- return -1;
- }
-
- printk("%s: %s: %02x:%02x:%02x:%02x:%02x:%02x, irq %d\n",
- dev->name, sp->name,
- dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
- dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5], dev->irq);
-
- /* start link poll timer */
- ar2313_setup_timer(dev);
-
- return 0;
-}
-
-#if 0
-static void ar2313_dump_regs(struct net_device *dev)
-{
- unsigned int *ptr, i;
- struct ar2313_private *sp = (struct ar2313_private *) dev->priv;
-
- ptr = (unsigned int *) sp->eth_regs;
- for (i = 0; i < (sizeof(ETHERNET_STRUCT) / sizeof(unsigned int));
- i++, ptr++) {
- printk("ENET: %08x = %08x\n", (int) ptr, *ptr);
- }
-
- ptr = (unsigned int *) sp->dma_regs;
- for (i = 0; i < (sizeof(DMA) / sizeof(unsigned int)); i++, ptr++) {
- printk("DMA: %08x = %08x\n", (int) ptr, *ptr);
- }
-
- ptr = (unsigned int *) sp->int_regs;
- for (i = 0; i < (sizeof(INTERRUPT) / sizeof(unsigned int)); i++, ptr++) {
- printk("INT: %08x = %08x\n", (int) ptr, *ptr);
- }
-
- for (i = 0; i < AR2313_DESCR_ENTRIES; i++) {
- ar2313_descr_t *td = &sp->tx_ring[i];
- printk("Tx desc %2d: %08x %08x %08x %08x\n", i,
- td->status, td->devcs, td->addr, td->descr);
- }
-}
-#endif
-
-#ifdef TX_TIMEOUT
-static void ar2313_tx_timeout(struct net_device *dev)
-{
- struct ar2313_private *sp = (struct ar2313_private *) dev->priv;
- unsigned long flags;
-
-#if DEBUG_TX
- printk("Tx timeout\n");
-#endif
- spin_lock_irqsave(&sp->lock, flags);
- ar2313_restart(dev);
- spin_unlock_irqrestore(&sp->lock, flags);
-}
-#endif
-
-#if DEBUG_MC
-static void printMcList(struct net_device *dev)
-{
- struct dev_mc_list *list = dev->mc_list;
- int num = 0, i;
- while (list) {
- printk("%d MC ADDR ", num);
- for (i = 0; i < list->dmi_addrlen; i++) {
- printk(":%02x", list->dmi_addr[i]);
- }
- list = list->next;
- printk("\n");
- }
-}
-#endif
-
-/*
- * Set or clear the multicast filter for this adaptor.
- * THIS IS ABSOLUTE CRAP, disabled
- */
-static void ar2313_multicast_list(struct net_device *dev)
-{
- /*
- * Always listen to broadcasts and
- * treat IFF bits independently
- */
- struct ar2313_private *sp = (struct ar2313_private *) dev->priv;
- unsigned int recognise;
-
- recognise = sp->eth_regs->mac_control;
-
- if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
- recognise |= MAC_CONTROL_PR;
- } else {
- recognise &= ~MAC_CONTROL_PR;
- }
-
- if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 15)) {
-#if DEBUG_MC
- printMcList(dev);
- printk("%s: all MULTICAST mc_count %d\n", __FUNCTION__,
- dev->mc_count);
-#endif
- recognise |= MAC_CONTROL_PM; /* all multicast */
- } else if (dev->mc_count > 0) {
-#if DEBUG_MC
- printMcList(dev);
- printk("%s: mc_count %d\n", __FUNCTION__, dev->mc_count);
-#endif
- recognise |= MAC_CONTROL_PM; /* for the time being */
- }
-#if DEBUG_MC
- printk("%s: setting %08x to %08x\n", __FUNCTION__, (int) sp->eth_regs,
- recognise);
-#endif
-
- sp->eth_regs->mac_control = recognise;
-}
-
-static void rx_tasklet_cleanup(struct net_device *dev)
-{
- struct ar2313_private *sp = dev->priv;
-
- /*
- * Tasklet may be scheduled. Need to get it removed from the list
- * since we're about to free the struct.
- */
-
- sp->unloading = 1;
- tasklet_enable(&sp->rx_tasklet);
- tasklet_kill(&sp->rx_tasklet);
-}
-
-static int __exit ar2313_remove(struct platform_device *pdev)
-{
- struct net_device *dev = platform_get_drvdata(pdev);
- rx_tasklet_cleanup(dev);
- ar2313_init_cleanup(dev);
- unregister_netdev(dev);
- kfree(dev);
- return 0;
-}
-
-
-/*
- * Restart the AR2313 ethernet controller.
- */
-static int ar2313_restart(struct net_device *dev)
-{
- /* disable interrupts */
- disable_irq(dev->irq);
-
- /* stop mac */
- ar2313_halt(dev);
-
- /* initialize */
- ar2313_init(dev);
-
- /* enable interrupts */
- enable_irq(dev->irq);
-
- return 0;
-}
-
-static struct platform_driver ar2313_driver = {
- .driver.name = "ar531x-eth",
- .probe = ar2313_probe,
- .remove = ar2313_remove,
-};
-
-int __init ar2313_module_init(void)
-{
- return platform_driver_register(&ar2313_driver);
-}
-
-void __exit ar2313_module_cleanup(void)
-{
- platform_driver_unregister(&ar2313_driver);
-}
-
-module_init(ar2313_module_init);
-module_exit(ar2313_module_cleanup);
-
-
-static void ar2313_free_descriptors(struct net_device *dev)
-{
- struct ar2313_private *sp = dev->priv;
- if (sp->rx_ring != NULL) {
- kfree((void *) KSEG0ADDR(sp->rx_ring));
- sp->rx_ring = NULL;
- sp->tx_ring = NULL;
- }
-}
-
-
-static int ar2313_allocate_descriptors(struct net_device *dev)
-{
- struct ar2313_private *sp = dev->priv;
- int size;
- int j;
- ar2313_descr_t *space;
-
- if (sp->rx_ring != NULL) {
- printk("%s: already done.\n", __FUNCTION__);
- return 0;
- }
-
- size =
- (sizeof(ar2313_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES));
- space = kmalloc(size, GFP_KERNEL);
- if (space == NULL)
- return 1;
-
- /* invalidate caches */
- dma_cache_inv((unsigned int) space, size);
-
- /* now convert pointer to KSEG1 */
- space = (ar2313_descr_t *) KSEG1ADDR(space);
-
- memset((void *) space, 0, size);
-
- sp->rx_ring = space;
- space += AR2313_DESCR_ENTRIES;
-
- sp->tx_ring = space;
- space += AR2313_DESCR_ENTRIES;
-
- /* Initialize the transmit Descriptors */
- for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
- ar2313_descr_t *td = &sp->tx_ring[j];
- td->status = 0;
- td->devcs = DMA_TX1_CHAINED;
- td->addr = 0;
- td->descr =
- virt_to_phys(&sp->
- tx_ring[(j + 1) & (AR2313_DESCR_ENTRIES - 1)]);
- }
-
- return 0;
-}
-
-
-/*
- * Generic cleanup handling data allocated during init. Used when the
- * module is unloaded or if an error occurs during initialization
- */
-static void ar2313_init_cleanup(struct net_device *dev)
-{
- struct ar2313_private *sp = dev->priv;
- struct sk_buff *skb;
- int j;
-
- ar2313_free_descriptors(dev);
-
- if (sp->eth_regs)
- iounmap((void *) sp->eth_regs);
- if (sp->dma_regs)
- iounmap((void *) sp->dma_regs);
-
- if (sp->rx_skb) {
- for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
- skb = sp->rx_skb[j];
- if (skb) {
- sp->rx_skb[j] = NULL;
- dev_kfree_skb(skb);
- }
- }
- kfree(sp->rx_skb);
- sp->rx_skb = NULL;
- }
-
- if (sp->tx_skb) {
- for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
- skb = sp->tx_skb[j];
- if (skb) {
- sp->tx_skb[j] = NULL;
- dev_kfree_skb(skb);
- }
- }
- kfree(sp->tx_skb);
- sp->tx_skb = NULL;
- }
-}
-
-static int ar2313_setup_timer(struct net_device *dev)
-{
- struct ar2313_private *sp = dev->priv;
-
- init_timer(&sp->link_timer);
-
- sp->link_timer.function = ar2313_link_timer_fn;
- sp->link_timer.data = (int) dev;
- sp->link_timer.expires = jiffies + HZ;
-
- add_timer(&sp->link_timer);
- return 0;
-
-}
-
-static void ar2313_link_timer_fn(unsigned long data)
-{
- struct net_device *dev = (struct net_device *) data;
- struct ar2313_private *sp = dev->priv;
-
- // see if the link status changed
- // This was needed to make sure we set the PHY to the
- // autonegotiated value of half or full duplex.
- ar2313_check_link(dev);
-
- // Loop faster when we don't have link.
- // This was needed to speed up the AP bootstrap time.
- if (sp->link == 0) {
- mod_timer(&sp->link_timer, jiffies + HZ / 2);
- } else {
- mod_timer(&sp->link_timer, jiffies + LINK_TIMER);
- }
-}
-
-static void ar2313_check_link(struct net_device *dev)
-{
- struct ar2313_private *sp = dev->priv;
- u16 phyData;
-
- phyData = armiiread(dev, sp->phy, MII_BMSR);
- if (sp->phyData != phyData) {
- if (phyData & BMSR_LSTATUS) {
- /* link is present, ready link partner ability to deterine
- duplexity */
- int duplex = 0;
- u16 reg;
-
- sp->link = 1;
- reg = armiiread(dev, sp->phy, MII_BMCR);
- if (reg & BMCR_ANENABLE) {
- /* auto neg enabled */
- reg = armiiread(dev, sp->phy, MII_LPA);
- duplex = (reg & (LPA_100FULL | LPA_10FULL)) ? 1 : 0;
- } else {
- /* no auto neg, just read duplex config */
- duplex = (reg & BMCR_FULLDPLX) ? 1 : 0;
- }
-
- printk(KERN_INFO "%s: Configuring MAC for %s duplex\n",
- dev->name, (duplex) ? "full" : "half");
-
- if (duplex) {
- /* full duplex */
- sp->eth_regs->mac_control =
- ((sp->eth_regs->
- mac_control | MAC_CONTROL_F) & ~MAC_CONTROL_DRO);
- } else {
- /* half duplex */
- sp->eth_regs->mac_control =
- ((sp->eth_regs->
- mac_control | MAC_CONTROL_DRO) & ~MAC_CONTROL_F);
- }
- } else {
- /* no link */
- sp->link = 0;
- }
- sp->phyData = phyData;
- }
-}
-
-static int ar2313_reset_reg(struct net_device *dev)
-{
- struct ar2313_private *sp = (struct ar2313_private *) dev->priv;
- unsigned int ethsal, ethsah;
- unsigned int flags;
-
- *sp->int_regs |= sp->cfg->reset_mac;
- mdelay(10);
- *sp->int_regs &= ~sp->cfg->reset_mac;
- mdelay(10);
- *sp->int_regs |= sp->cfg->reset_phy;
- mdelay(10);
- *sp->int_regs &= ~sp->cfg->reset_phy;
- mdelay(10);
-
- sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR);
- mdelay(10);
- sp->dma_regs->bus_mode =
- ((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE);
-
- /* enable interrupts */
- sp->dma_regs->intr_ena = (DMA_STATUS_AIS |
- DMA_STATUS_NIS |
- DMA_STATUS_RI |
- DMA_STATUS_TI | DMA_STATUS_FBE);
- sp->dma_regs->xmt_base = virt_to_phys(sp->tx_ring);
- sp->dma_regs->rcv_base = virt_to_phys(sp->rx_ring);
- sp->dma_regs->control =
- (DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF);
-
- sp->eth_regs->flow_control = (FLOW_CONTROL_FCE);
- sp->eth_regs->vlan_tag = (0x8100);
-
- /* Enable Ethernet Interface */
- flags = (MAC_CONTROL_TE | /* transmit enable */
- MAC_CONTROL_PM | /* pass mcast */
- MAC_CONTROL_F | /* full duplex */
- MAC_CONTROL_HBD); /* heart beat disabled */
-
- if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
- flags |= MAC_CONTROL_PR;
- }
- sp->eth_regs->mac_control = flags;
-
- /* Set all Ethernet station address registers to their initial values */
- ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
- (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF));
-
- ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
- (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
- (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
- (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF));
-
- sp->eth_regs->mac_addr[0] = ethsah;
- sp->eth_regs->mac_addr[1] = ethsal;
-
- mdelay(10);
-
- return (0);
-}
-
-
-static int ar2313_init(struct net_device *dev)
-{
- struct ar2313_private *sp = dev->priv;
- int ecode = 0;
-
- /*
- * Allocate descriptors
- */
- if (ar2313_allocate_descriptors(dev)) {
- printk("%s: %s: ar2313_allocate_descriptors failed\n",
- dev->name, __FUNCTION__);
- ecode = -EAGAIN;
- goto init_error;
- }
-
- /*
- * Get the memory for the skb rings.
- */
- if (sp->rx_skb == NULL) {
- sp->rx_skb =
- kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
- GFP_KERNEL);
- if (!(sp->rx_skb)) {
- printk("%s: %s: rx_skb kmalloc failed\n",
- dev->name, __FUNCTION__);
- ecode = -EAGAIN;
- goto init_error;
- }
- }
- memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
-
- if (sp->tx_skb == NULL) {
- sp->tx_skb =
- kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
- GFP_KERNEL);
- if (!(sp->tx_skb)) {
- printk("%s: %s: tx_skb kmalloc failed\n",
- dev->name, __FUNCTION__);
- ecode = -EAGAIN;
- goto init_error;
- }
- }
- memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
-
- /*
- * Set tx_csm before we start receiving interrupts, otherwise
- * the interrupt handler might think it is supposed to process
- * tx ints before we are up and running, which may cause a null
- * pointer access in the int handler.
- */
- sp->rx_skbprd = 0;
- sp->cur_rx = 0;
- sp->tx_prd = 0;
- sp->tx_csm = 0;
-
- /*
- * Zero the stats before starting the interface
- */
- memset(&sp->stats, 0, sizeof(sp->stats));
-
- /*
- * We load the ring here as there seem to be no way to tell the
- * firmware to wipe the ring without re-initializing it.
- */
- ar2313_load_rx_ring(dev, RX_RING_SIZE);
-
- /*
- * Init hardware
- */
- ar2313_reset_reg(dev);
-
- /*
- * Get the IRQ
- */
- ecode =
- request_irq(dev->irq, &ar2313_interrupt,
- IRQF_SHARED | IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
- dev->name, dev);
- if (ecode) {
- printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n",
- dev->name, __FUNCTION__, dev->irq);
- goto init_error;
- }
-
-
- tasklet_enable(&sp->rx_tasklet);
-
- return 0;
-
- init_error:
- ar2313_init_cleanup(dev);
- return ecode;
-}
-
-/*
- * Load the rx ring.
- *
- * Loading rings is safe without holding the spin lock since this is
- * done only before the device is enabled, thus no interrupts are
- * generated and by the interrupt handler/tasklet handler.
- */
-static void ar2313_load_rx_ring(struct net_device *dev, int nr_bufs)
-{
-
- struct ar2313_private *sp = ((struct net_device *) dev)->priv;
- short i, idx;
-
- idx = sp->rx_skbprd;
-
- for (i = 0; i < nr_bufs; i++) {
- struct sk_buff *skb;
- ar2313_descr_t *rd;
-
- if (sp->rx_skb[idx]) {
-#if DEBUG_RX
- printk(KERN_INFO "ar2313 rx refill full\n");
-#endif /* DEBUG */
- break;
- }
- // partha: create additional room for the second GRE fragment
- skb = alloc_skb(AR2313_BUFSIZE + 128, GFP_ATOMIC);
- if (!skb) {
- printk("\n\n\n\n %s: No memory in system\n\n\n\n",
- __FUNCTION__);
- break;
- }
- // partha: create additional room in the front for tx pkt capture
- skb_reserve(skb, 32);
-
- /*
- * Make sure IP header starts on a fresh cache line.
- */
- skb->dev = dev;
- skb_reserve(skb, RX_OFFSET);
- sp->rx_skb[idx] = skb;
-
- rd = (ar2313_descr_t *) & sp->rx_ring[idx];
-
- /* initialize dma descriptor */
- rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
- DMA_RX1_CHAINED);
- rd->addr = virt_to_phys(skb->data);
- rd->descr =
- virt_to_phys(&sp->
- rx_ring[(idx + 1) & (AR2313_DESCR_ENTRIES - 1)]);
- rd->status = DMA_RX_OWN;
-
- idx = DSC_NEXT(idx);
- }
-
- if (!i) {
-#if DEBUG_ERR
- printk(KERN_INFO
- "Out of memory when allocating standard receive buffers\n");
-#endif /* DEBUG */
- } else {
- sp->rx_skbprd = idx;
- }
-
- return;
-}
-
-#define AR2313_MAX_PKTS_PER_CALL 64
-
-static int ar2313_rx_int(struct net_device *dev)
-{
- struct ar2313_private *sp = dev->priv;
- struct sk_buff *skb, *skb_new;
- ar2313_descr_t *rxdesc;
- unsigned int status;
- u32 idx;
- int pkts = 0;
- int rval;
-
- idx = sp->cur_rx;
-
- /* process at most the entire ring and then wait for another interrupt
- */
- while (1) {
-
- rxdesc = &sp->rx_ring[idx];
- status = rxdesc->status;
- if (status & DMA_RX_OWN) {
- /* SiByte owns descriptor or descr not yet filled in */
- rval = 0;
- break;
- }
-
- if (++pkts > AR2313_MAX_PKTS_PER_CALL) {
- rval = 1;
- break;
- }
-#if DEBUG_RX
- printk("index %d\n", idx);
- printk("RX status %08x\n", rxdesc->status);
- printk("RX devcs %08x\n", rxdesc->devcs);
- printk("RX addr %08x\n", rxdesc->addr);
- printk("RX descr %08x\n", rxdesc->descr);
-#endif
-
- if ((status & (DMA_RX_ERROR | DMA_RX_ERR_LENGTH)) &&
- (!(status & DMA_RX_LONG))) {
-#if DEBUG_RX
- printk("%s: rx ERROR %08x\n", __FUNCTION__, status);
-#endif
- sp->stats.rx_errors++;
- sp->stats.rx_dropped++;
-
- /* add statistics counters */
- if (status & DMA_RX_ERR_CRC)
- sp->stats.rx_crc_errors++;
- if (status & DMA_RX_ERR_COL)
- sp->stats.rx_over_errors++;
- if (status & DMA_RX_ERR_LENGTH)
- sp->stats.rx_length_errors++;
- if (status & DMA_RX_ERR_RUNT)
- sp->stats.rx_over_errors++;
- if (status & DMA_RX_ERR_DESC)
- sp->stats.rx_over_errors++;
-
- } else {
- /* alloc new buffer. */
- skb_new = dev_alloc_skb(AR2313_BUFSIZE + RX_OFFSET + 128);
- if (skb_new != NULL) {
-
- skb = sp->rx_skb[idx];
- /* set skb */
- skb_put(skb,
- ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
-
- sp->stats.rx_bytes += skb->len;
- skb->protocol = eth_type_trans(skb, dev);
- /* pass the packet to upper layers */
- netif_rx(skb);
-
- skb_new->dev = dev;
- /* 16 bit align */
- skb_reserve(skb_new, RX_OFFSET + 32);
- /* reset descriptor's curr_addr */
- rxdesc->addr = virt_to_phys(skb_new->data);
-
- sp->stats.rx_packets++;
- sp->rx_skb[idx] = skb_new;
- } else {
- sp->stats.rx_dropped++;
- }
- }
-
- rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
- DMA_RX1_CHAINED);
- rxdesc->status = DMA_RX_OWN;
-
- idx = DSC_NEXT(idx);
- }
-
- sp->cur_rx = idx;
-
- return rval;
-}
-
-
-static void ar2313_tx_int(struct net_device *dev)
-{
- struct ar2313_private *sp = dev->priv;
- u32 idx;
- struct sk_buff *skb;
- ar2313_descr_t *txdesc;
- unsigned int status = 0;
-
- idx = sp->tx_csm;
-
- while (idx != sp->tx_prd) {
-
- txdesc = &sp->tx_ring[idx];
-
-#if DEBUG_TX
- printk
- ("%s: TXINT: csm=%d idx=%d prd=%d status=%x devcs=%x addr=%08x descr=%x\n",
- dev->name, sp->tx_csm, idx, sp->tx_prd, txdesc->status,
- txdesc->devcs, txdesc->addr, txdesc->descr);
-#endif /* DEBUG */
-
- if ((status = txdesc->status) & DMA_TX_OWN) {
- /* ar2313 dma still owns descr */
- break;
- }
- /* done with this descriptor */
- dma_unmap_single(NULL, txdesc->addr,
- txdesc->devcs & DMA_TX1_BSIZE_MASK,
- DMA_TO_DEVICE);
- txdesc->status = 0;
-
- if (status & DMA_TX_ERROR) {
- sp->stats.tx_errors++;
- sp->stats.tx_dropped++;
- if (status & DMA_TX_ERR_UNDER)
- sp->stats.tx_fifo_errors++;
- if (status & DMA_TX_ERR_HB)
- sp->stats.tx_heartbeat_errors++;
- if (status & (DMA_TX_ERR_LOSS | DMA_TX_ERR_LINK))
- sp->stats.tx_carrier_errors++;
- if (status & (DMA_TX_ERR_LATE |
- DMA_TX_ERR_COL |
- DMA_TX_ERR_JABBER | DMA_TX_ERR_DEFER))
- sp->stats.tx_aborted_errors++;
- } else {
- /* transmit OK */
- sp->stats.tx_packets++;
- }
-
- skb = sp->tx_skb[idx];
- sp->tx_skb[idx] = NULL;
- idx = DSC_NEXT(idx);
- sp->stats.tx_bytes += skb->len;
- dev_kfree_skb_irq(skb);
- }
-
- sp->tx_csm = idx;
-
- return;
-}
-
-
-static void rx_tasklet_func(unsigned long data)
-{
- struct net_device *dev = (struct net_device *) data;
- struct ar2313_private *sp = dev->priv;
-
- if (sp->unloading) {
- return;
- }
-
- if (ar2313_rx_int(dev)) {
- tasklet_hi_schedule(&sp->rx_tasklet);
- } else {
- unsigned long flags;
- spin_lock_irqsave(&sp->lock, flags);
- sp->dma_regs->intr_ena |= DMA_STATUS_RI;
- spin_unlock_irqrestore(&sp->lock, flags);
- }
-}
-
-static void rx_schedule(struct net_device *dev)
-{
- struct ar2313_private *sp = dev->priv;
-
- sp->dma_regs->intr_ena &= ~DMA_STATUS_RI;
-
- tasklet_hi_schedule(&sp->rx_tasklet);
-}
-
-static irqreturn_t ar2313_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = (struct net_device *) dev_id;
- struct ar2313_private *sp = dev->priv;
- unsigned int status, enabled;
-
- /* clear interrupt */
- /*
- * Don't clear RI bit if currently disabled.
- */
- status = sp->dma_regs->status;
- enabled = sp->dma_regs->intr_ena;
- sp->dma_regs->status = status & enabled;
-
- if (status & DMA_STATUS_NIS) {
- /* normal status */
- /*
- * Don't schedule rx processing if interrupt
- * is already disabled.
- */
- if (status & enabled & DMA_STATUS_RI) {
- /* receive interrupt */
- rx_schedule(dev);
- }
- if (status & DMA_STATUS_TI) {
- /* transmit interrupt */
- ar2313_tx_int(dev);
- }
- }
-
- if (status & DMA_STATUS_AIS) {
-#if DEBUG_INT
- printk("%s: AIS set %08x & %x\n", __FUNCTION__,
- status, (DMA_STATUS_FBE | DMA_STATUS_TPS));
-#endif
- /* abnormal status */
- if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS)) {
- ar2313_restart(dev);
- }
- }
- return IRQ_HANDLED;
-}
-
-
-static int ar2313_open(struct net_device *dev)
-{
- struct ar2313_private *sp;
-
- sp = dev->priv;
-
- dev->mtu = 1500;
- netif_start_queue(dev);
-
- sp->eth_regs->mac_control |= MAC_CONTROL_RE;
-
- return 0;
-}
-
-static void ar2313_halt(struct net_device *dev)
-{
- struct ar2313_private *sp = dev->priv;
- int j;
-
- tasklet_disable(&sp->rx_tasklet);
-
- /* kill the MAC */
- sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE | /* disable Receives */
- MAC_CONTROL_TE); /* disable Transmits */
- /* stop dma */
- sp->dma_regs->control = 0;
- sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR;
-
- /* place phy and MAC in reset */
- *sp->int_regs |= (sp->cfg->reset_mac | sp->cfg->reset_phy);
-
- /* free buffers on tx ring */
- for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
- struct sk_buff *skb;
- ar2313_descr_t *txdesc;
-
- txdesc = &sp->tx_ring[j];
- txdesc->descr = 0;
-
- skb = sp->tx_skb[j];
- if (skb) {
- dev_kfree_skb(skb);
- sp->tx_skb[j] = NULL;
- }
- }
-}
-
-/*
- * close should do nothing. Here's why. It's called when
- * 'ifconfig bond0 down' is run. If it calls free_irq then
- * the irq is gone forever ! When bond0 is made 'up' again,
- * the ar2313_open () does not call request_irq (). Worse,
- * the call to ar2313_halt() generates a WDOG reset due to
- * the write to 'sp->int_regs' and the box reboots.
- * Commenting this out is good since it allows the
- * system to resume when bond0 is made up again.
- */
-static int ar2313_close(struct net_device *dev)
-{
-#if 0
- /*
- * Disable interrupts
- */
- disable_irq(dev->irq);
-
- /*
- * Without (or before) releasing irq and stopping hardware, this
- * is an absolute non-sense, by the way. It will be reset instantly
- * by the first irq.
- */
- netif_stop_queue(dev);
-
- /* stop the MAC and DMA engines */
- ar2313_halt(dev);
-
- /* release the interrupt */
- free_irq(dev->irq, dev);
-
-#endif
- return 0;
-}
-
-static int ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
- struct ar2313_private *sp = dev->priv;
- ar2313_descr_t *td;
- u32 idx;
-
- idx = sp->tx_prd;
- td = &sp->tx_ring[idx];
-
- if (td->status & DMA_TX_OWN) {
-#if DEBUG_TX
- printk("%s: No space left to Tx\n", __FUNCTION__);
-#endif
- /* free skbuf and lie to the caller that we sent it out */
- sp->stats.tx_dropped++;
- dev_kfree_skb(skb);
-
- /* restart transmitter in case locked */
- sp->dma_regs->xmt_poll = 0;
- return 0;
- }
-
- /* Setup the transmit descriptor. */
- td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) |
- (DMA_TX1_LS | DMA_TX1_IC | DMA_TX1_CHAINED));
- td->addr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
- td->status = DMA_TX_OWN;
-
- /* kick transmitter last */
- sp->dma_regs->xmt_poll = 0;
-
-#if DEBUG_TX
- printk("index %d\n", idx);
- printk("TX status %08x\n", td->status);
- printk("TX devcs %08x\n", td->devcs);
- printk("TX addr %08x\n", td->addr);
- printk("TX descr %08x\n", td->descr);
-#endif
-
- sp->tx_skb[idx] = skb;
- idx = DSC_NEXT(idx);
- sp->tx_prd = idx;
-
- return 0;
-}
-
-static int netdev_get_ecmd(struct net_device *dev,
- struct ethtool_cmd *ecmd)
-{
- struct ar2313_private *np = dev->priv;
- u32 tmp;
-
- ecmd->supported =
- (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
- SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
- SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII);
-
- ecmd->port = PORT_TP;
- /* only supports internal transceiver */
- ecmd->transceiver = XCVR_INTERNAL;
- /* not sure what this is for */
- ecmd->phy_address = 1;
-
- ecmd->advertising = ADVERTISED_MII;
- tmp = armiiread(dev, np->phy, MII_ADVERTISE);
- if (tmp & ADVERTISE_10HALF)
- ecmd->advertising |= ADVERTISED_10baseT_Half;
- if (tmp & ADVERTISE_10FULL)
- ecmd->advertising |= ADVERTISED_10baseT_Full;
- if (tmp & ADVERTISE_100HALF)
- ecmd->advertising |= ADVERTISED_100baseT_Half;
- if (tmp & ADVERTISE_100FULL)
- ecmd->advertising |= ADVERTISED_100baseT_Full;
-
- tmp = armiiread(dev, np->phy, MII_BMCR);
- if (tmp & BMCR_ANENABLE) {
- ecmd->advertising |= ADVERTISED_Autoneg;
- ecmd->autoneg = AUTONEG_ENABLE;
- } else {
- ecmd->autoneg = AUTONEG_DISABLE;
- }
-
- if (ecmd->autoneg == AUTONEG_ENABLE) {
- tmp = armiiread(dev, np->phy, MII_LPA);
- if (tmp & (LPA_100FULL | LPA_10FULL)) {
- ecmd->duplex = DUPLEX_FULL;
- } else {
- ecmd->duplex = DUPLEX_HALF;
- }
- if (tmp & (LPA_100FULL | LPA_100HALF)) {
- ecmd->speed = SPEED_100;
- } else {
- ecmd->speed = SPEED_10;
- }
- } else {
- if (tmp & BMCR_FULLDPLX) {
- ecmd->duplex = DUPLEX_FULL;
- } else {
- ecmd->duplex = DUPLEX_HALF;
- }
- if (tmp & BMCR_SPEED100) {
- ecmd->speed = SPEED_100;
- } else {
- ecmd->speed = SPEED_10;
- }
- }
-
- /* ignore maxtxpkt, maxrxpkt for now */
-
- return 0;
-}
-
-static int netdev_set_ecmd(struct net_device *dev,
- struct ethtool_cmd *ecmd)
-{
- struct ar2313_private *np = dev->priv;
- u32 tmp;
-
- if (ecmd->speed != SPEED_10 && ecmd->speed != SPEED_100)
- return -EINVAL;
- if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
- return -EINVAL;
- if (ecmd->port != PORT_TP)
- return -EINVAL;
- if (ecmd->transceiver != XCVR_INTERNAL)
- return -EINVAL;
- if (ecmd->autoneg != AUTONEG_DISABLE
- && ecmd->autoneg != AUTONEG_ENABLE)
- return -EINVAL;
- /* ignore phy_address, maxtxpkt, maxrxpkt for now */
-
- /* WHEW! now lets bang some bits */
-
- tmp = armiiread(dev, np->phy, MII_BMCR);
- if (ecmd->autoneg == AUTONEG_ENABLE) {
- /* turn on autonegotiation */
- tmp |= BMCR_ANENABLE;
- printk("%s: Enabling auto-neg\n", dev->name);
- } else {
- /* turn off auto negotiation, set speed and duplexity */
- tmp &= ~(BMCR_ANENABLE | BMCR_SPEED100 | BMCR_FULLDPLX);
- if (ecmd->speed == SPEED_100)
- tmp |= BMCR_SPEED100;
- if (ecmd->duplex == DUPLEX_FULL)
- tmp |= BMCR_FULLDPLX;
- printk("%s: Hard coding %d/%s\n", dev->name,
- (ecmd->speed == SPEED_100) ? 100 : 10,
- (ecmd->duplex == DUPLEX_FULL) ? "full" : "half");
- }
- armiiwrite(dev, np->phy, MII_BMCR, tmp);
- np->phyData = 0;
- return 0;
-}
-
-static int netdev_ethtool_ioctl(struct net_device *dev, void *useraddr)
-{
- struct ar2313_private *np = dev->priv;
- u32 cmd;
-
- if (get_user(cmd, (u32 *) useraddr))
- return -EFAULT;
-
- switch (cmd) {
- /* get settings */
- case ETHTOOL_GSET:{
- struct ethtool_cmd ecmd = { ETHTOOL_GSET };
- spin_lock_irq(&np->lock);
- netdev_get_ecmd(dev, &ecmd);
- spin_unlock_irq(&np->lock);
- if (copy_to_user(useraddr, &ecmd, sizeof(ecmd)))
- return -EFAULT;
- return 0;
- }
- /* set settings */
- case ETHTOOL_SSET:{
- struct ethtool_cmd ecmd;
- int r;
- if (copy_from_user(&ecmd, useraddr, sizeof(ecmd)))
- return -EFAULT;
- spin_lock_irq(&np->lock);
- r = netdev_set_ecmd(dev, &ecmd);
- spin_unlock_irq(&np->lock);
- return r;
- }
- /* restart autonegotiation */
- case ETHTOOL_NWAY_RST:{
- int tmp;
- int r = -EINVAL;
- /* if autoneg is off, it's an error */
- tmp = armiiread(dev, np->phy, MII_BMCR);
- if (tmp & BMCR_ANENABLE) {
- tmp |= (BMCR_ANRESTART);
- armiiwrite(dev, np->phy, MII_BMCR, tmp);
- r = 0;
- }
- return r;
- }
- /* get link status */
- case ETHTOOL_GLINK:{
- struct ethtool_value edata = { ETHTOOL_GLINK };
- edata.data =
- (armiiread(dev, np->phy, MII_BMSR) & BMSR_LSTATUS) ? 1 : 0;
- if (copy_to_user(useraddr, &edata, sizeof(edata)))
- return -EFAULT;
- return 0;
- }
- }
-
- return -EOPNOTSUPP;
-}
-
-static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
- struct mii_ioctl_data *data = (struct mii_ioctl_data *) &ifr->ifr_data;
-
- switch (cmd) {
-
- case SIOCETHTOOL:
- return netdev_ethtool_ioctl(dev, (void *) ifr->ifr_data);
-
- case SIOCGMIIPHY: /* Get address of MII PHY in use. */
- data->phy_id = 1;
- /* Fall Through */
-
- case SIOCGMIIREG: /* Read MII PHY register. */
- data->val_out = armiiread(dev, data->phy_id & 0x1f,
- data->reg_num & 0x1f);
- return 0;
- case SIOCSMIIREG: /* Write MII PHY register. */
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
- armiiwrite(dev, data->phy_id & 0x1f,
- data->reg_num & 0x1f, data->val_in);
- return 0;
-
- case SIOCSIFHWADDR:
- if (copy_from_user
- (dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
- return -EFAULT;
- return 0;
-
- case SIOCGIFHWADDR:
- if (copy_to_user
- (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
- return -EFAULT;
- return 0;
-
- default:
- break;
- }
-
- return -EOPNOTSUPP;
-}
-
-static struct net_device_stats *ar2313_get_stats(struct net_device *dev)
-{
- struct ar2313_private *sp = dev->priv;
- return &sp->stats;
-}
-
-
-#define MII_ADDR(phy, reg) \
- ((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT))
-
-static short armiiread(struct net_device *dev, short phy, short reg)
-{
- struct ar2313_private *sp = (struct ar2313_private *) dev->priv;
- volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
-
- ethernet->mii_addr = MII_ADDR(phy, reg);
- while (ethernet->mii_addr & MII_ADDR_BUSY);
- return (ethernet->mii_data >> MII_DATA_SHIFT);
-}
-
-static void
-armiiwrite(struct net_device *dev, short phy, short reg, short data)
-{
- struct ar2313_private *sp = (struct ar2313_private *) dev->priv;
- volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
-
- while (ethernet->mii_addr & MII_ADDR_BUSY);
- ethernet->mii_data = data << MII_DATA_SHIFT;
- ethernet->mii_addr = MII_ADDR(phy, reg) | MII_ADDR_WRITE;
-}
diff --git a/target/linux/atheros-2.6/files/drivers/net/ar2313/ar2313.h b/target/linux/atheros-2.6/files/drivers/net/ar2313/ar2313.h
deleted file mode 100644
index c0b3a4f76..000000000
--- a/target/linux/atheros-2.6/files/drivers/net/ar2313/ar2313.h
+++ /dev/null
@@ -1,193 +0,0 @@
-#ifndef _AR2313_H_
-#define _AR2313_H_
-
-#include <linux/autoconf.h>
-#include <asm/bootinfo.h>
-#include <ar531x_platform.h>
-
-/*
- * probe link timer - 5 secs
- */
-#define LINK_TIMER (5*HZ)
-
-#define IS_DMA_TX_INT(X) (((X) & (DMA_STATUS_TI)) != 0)
-#define IS_DMA_RX_INT(X) (((X) & (DMA_STATUS_RI)) != 0)
-#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN)) == 0)
-
-#define AR2313_TX_TIMEOUT (HZ/4)
-
-/*
- * Rings
- */
-#define DSC_RING_ENTRIES_SIZE (AR2313_DESCR_ENTRIES * sizeof(struct desc))
-#define DSC_NEXT(idx) ((idx + 1) & (AR2313_DESCR_ENTRIES - 1))
-
-static inline int tx_space(u32 csm, u32 prd)
-{
- return (csm - prd - 1) & (AR2313_DESCR_ENTRIES - 1);
-}
-
-#if MAX_SKB_FRAGS
-#define TX_RESERVED (MAX_SKB_FRAGS+1) /* +1 for message header */
-#define tx_ring_full(csm, prd) (tx_space(csm, prd) <= TX_RESERVED)
-#else
-#define tx_ring_full 0
-#endif
-
-#define AR2313_MBGET 2
-#define AR2313_MBSET 3
-#define AR2313_PCI_RECONFIG 4
-#define AR2313_PCI_DUMP 5
-#define AR2313_TEST_PANIC 6
-#define AR2313_TEST_NULLPTR 7
-#define AR2313_READ_DATA 8
-#define AR2313_WRITE_DATA 9
-#define AR2313_GET_VERSION 10
-#define AR2313_TEST_HANG 11
-#define AR2313_SYNC 12
-
-
-//
-// New Combo structure for Both Eth0 AND eth1
-//
-typedef struct {
- volatile unsigned int mac_control; /* 0x00 */
- volatile unsigned int mac_addr[2]; /* 0x04 - 0x08 */
- volatile unsigned int mcast_table[2]; /* 0x0c - 0x10 */
- volatile unsigned int mii_addr; /* 0x14 */
- volatile unsigned int mii_data; /* 0x18 */
- volatile unsigned int flow_control; /* 0x1c */
- volatile unsigned int vlan_tag; /* 0x20 */
- volatile unsigned int pad[7]; /* 0x24 - 0x3c */
- volatile unsigned int ucast_table[8]; /* 0x40-0x5c */
-
-} ETHERNET_STRUCT;
-
-/********************************************************************
- * Interrupt controller
- ********************************************************************/
-
-typedef struct {
- volatile unsigned int wdog_control; /* 0x08 */
- volatile unsigned int wdog_timer; /* 0x0c */
- volatile unsigned int misc_status; /* 0x10 */
- volatile unsigned int misc_mask; /* 0x14 */
- volatile unsigned int global_status; /* 0x18 */
- volatile unsigned int reserved; /* 0x1c */
- volatile unsigned int reset_control; /* 0x20 */
-} INTERRUPT;
-
-/********************************************************************
- * DMA controller
- ********************************************************************/
-typedef struct {
- volatile unsigned int bus_mode; /* 0x00 (CSR0) */
- volatile unsigned int xmt_poll; /* 0x04 (CSR1) */
- volatile unsigned int rcv_poll; /* 0x08 (CSR2) */
- volatile unsigned int rcv_base; /* 0x0c (CSR3) */
- volatile unsigned int xmt_base; /* 0x10 (CSR4) */
- volatile unsigned int status; /* 0x14 (CSR5) */
- volatile unsigned int control; /* 0x18 (CSR6) */
- volatile unsigned int intr_ena; /* 0x1c (CSR7) */
- volatile unsigned int rcv_missed; /* 0x20 (CSR8) */
- volatile unsigned int reserved[11]; /* 0x24-0x4c (CSR9-19) */
- volatile unsigned int cur_tx_buf_addr; /* 0x50 (CSR20) */
- volatile unsigned int cur_rx_buf_addr; /* 0x50 (CSR21) */
-} DMA;
-
-/*
- * Struct private for the Sibyte.
- *
- * Elements are grouped so variables used by the tx handling goes
- * together, and will go into the same cache lines etc. in order to
- * avoid cache line contention between the rx and tx handling on SMP.
- *
- * Frequently accessed variables are put at the beginning of the
- * struct to help the compiler generate better/shorter code.
- */
-struct ar2313_private {
- struct net_device *dev;
- int version;
- u32 mb[2];
-
- volatile ETHERNET_STRUCT *phy_regs;
- volatile ETHERNET_STRUCT *eth_regs;
- volatile DMA *dma_regs;
- volatile u32 *int_regs;
- struct ar531x_eth *cfg;
-
- spinlock_t lock; /* Serialise access to device */
-
- /*
- * RX and TX descriptors, must be adjacent
- */
- ar2313_descr_t *rx_ring;
- ar2313_descr_t *tx_ring;
-
-
- struct sk_buff **rx_skb;
- struct sk_buff **tx_skb;
-
- /*
- * RX elements
- */
- u32 rx_skbprd;
- u32 cur_rx;
-
- /*
- * TX elements
- */
- u32 tx_prd;
- u32 tx_csm;
-
- /*
- * Misc elements
- */
- int board_idx;
- char name[48];
- struct net_device_stats stats;
- struct {
- u32 address;
- u32 length;
- char *mapping;
- } desc;
-
-
- struct timer_list link_timer;
- unsigned short phy; /* merlot phy = 1, samsung phy = 0x1f */
- unsigned short mac;
- unsigned short link; /* 0 - link down, 1 - link up */
- u16 phyData;
-
- struct tasklet_struct rx_tasklet;
- int unloading;
-};
-
-
-/*
- * Prototypes
- */
-static int ar2313_init(struct net_device *dev);
-#ifdef TX_TIMEOUT
-static void ar2313_tx_timeout(struct net_device *dev);
-#endif
-#if 0
-static void ar2313_multicast_list(struct net_device *dev);
-#endif
-static int ar2313_restart(struct net_device *dev);
-#if DEBUG
-static void ar2313_dump_regs(struct net_device *dev);
-#endif
-static void ar2313_load_rx_ring(struct net_device *dev, int bufs);
-static irqreturn_t ar2313_interrupt(int irq, void *dev_id);
-static int ar2313_open(struct net_device *dev);
-static int ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev);
-static int ar2313_close(struct net_device *dev);
-static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr,
- int cmd);
-static void ar2313_init_cleanup(struct net_device *dev);
-static int ar2313_setup_timer(struct net_device *dev);
-static void ar2313_link_timer_fn(unsigned long data);
-static void ar2313_check_link(struct net_device *dev);
-static struct net_device_stats *ar2313_get_stats(struct net_device *dev);
-#endif /* _AR2313_H_ */
diff --git a/target/linux/atheros-2.6/files/drivers/net/ar2313/dma.h b/target/linux/atheros-2.6/files/drivers/net/ar2313/dma.h
deleted file mode 100644
index 113827047..000000000
--- a/target/linux/atheros-2.6/files/drivers/net/ar2313/dma.h
+++ /dev/null
@@ -1,142 +0,0 @@
-#ifndef __ARUBA_DMA_H__
-#define __ARUBA_DMA_H__
-
-/*******************************************************************************
- *
- * Copyright 2002 Integrated Device Technology, Inc.
- * All rights reserved.
- *
- * DMA register definition.
- *
- * File : $Id: dma.h,v 1.3 2002/06/06 18:34:03 astichte Exp $
- *
- * Author : ryan.holmQVist@idt.com
- * Date : 20011005
- * Update :
- * $Log: dma.h,v $
- * Revision 1.3 2002/06/06 18:34:03 astichte
- * Added XXX_PhysicalAddress and XXX_VirtualAddress
- *
- * Revision 1.2 2002/06/05 18:30:46 astichte
- * Removed IDTField
- *
- * Revision 1.1 2002/05/29 17:33:21 sysarch
- * jba File moved from vcode/include/idt/acacia
- *
- *
- ******************************************************************************/
-
-#define AR_BIT(x) (1 << (x))
-#define DMA_RX_ERR_CRC AR_BIT(1)
-#define DMA_RX_ERR_DRIB AR_BIT(2)
-#define DMA_RX_ERR_MII AR_BIT(3)
-#define DMA_RX_EV2 AR_BIT(5)
-#define DMA_RX_ERR_COL AR_BIT(6)
-#define DMA_RX_LONG AR_BIT(7)
-#define DMA_RX_LS AR_BIT(8) /* last descriptor */
-#define DMA_RX_FS AR_BIT(9) /* first descriptor */
-#define DMA_RX_MF AR_BIT(10) /* multicast frame */
-#define DMA_RX_ERR_RUNT AR_BIT(11) /* runt frame */
-#define DMA_RX_ERR_LENGTH AR_BIT(12) /* length error */
-#define DMA_RX_ERR_DESC AR_BIT(14) /* descriptor error */
-#define DMA_RX_ERROR AR_BIT(15) /* error summary */
-#define DMA_RX_LEN_MASK 0x3fff0000
-#define DMA_RX_LEN_SHIFT 16
-#define DMA_RX_FILT AR_BIT(30)
-#define DMA_RX_OWN AR_BIT(31) /* desc owned by DMA controller */
-
-#define DMA_RX1_BSIZE_MASK 0x000007ff
-#define DMA_RX1_BSIZE_SHIFT 0
-#define DMA_RX1_CHAINED AR_BIT(24)
-#define DMA_RX1_RER AR_BIT(25)
-
-#define DMA_TX_ERR_UNDER AR_BIT(1) /* underflow error */
-#define DMA_TX_ERR_DEFER AR_BIT(2) /* excessive deferral */
-#define DMA_TX_COL_MASK 0x78
-#define DMA_TX_COL_SHIFT 3
-#define DMA_TX_ERR_HB AR_BIT(7) /* hearbeat failure */
-#define DMA_TX_ERR_COL AR_BIT(8) /* excessive collisions */
-#define DMA_TX_ERR_LATE AR_BIT(9) /* late collision */
-#define DMA_TX_ERR_LINK AR_BIT(10) /* no carrier */
-#define DMA_TX_ERR_LOSS AR_BIT(11) /* loss of carrier */
-#define DMA_TX_ERR_JABBER AR_BIT(14) /* transmit jabber timeout */
-#define DMA_TX_ERROR AR_BIT(15) /* frame aborted */
-#define DMA_TX_OWN AR_BIT(31) /* descr owned by DMA controller */
-
-#define DMA_TX1_BSIZE_MASK 0x000007ff
-#define DMA_TX1_BSIZE_SHIFT 0
-#define DMA_TX1_CHAINED AR_BIT(24) /* chained descriptors */
-#define DMA_TX1_TER AR_BIT(25) /* transmit end of ring */
-#define DMA_TX1_FS AR_BIT(29) /* first segment */
-#define DMA_TX1_LS AR_BIT(30) /* last segment */
-#define DMA_TX1_IC AR_BIT(31) /* interrupt on completion */
-
-#define RCVPKT_LENGTH(X) (X >> 16) /* Received pkt Length */
-
-#define MAC_CONTROL_RE AR_BIT(2) /* receive enable */
-#define MAC_CONTROL_TE AR_BIT(3) /* transmit enable */
-#define MAC_CONTROL_DC AR_BIT(5) /* Deferral check */
-#define MAC_CONTROL_ASTP AR_BIT(8) /* Auto pad strip */
-#define MAC_CONTROL_DRTY AR_BIT(10) /* Disable retry */
-#define MAC_CONTROL_DBF AR_BIT(11) /* Disable bcast frames */
-#define MAC_CONTROL_LCC AR_BIT(12) /* late collision ctrl */
-#define MAC_CONTROL_HP AR_BIT(13) /* Hash Perfect filtering */
-#define MAC_CONTROL_HASH AR_BIT(14) /* Unicast hash filtering */
-#define MAC_CONTROL_HO AR_BIT(15) /* Hash only filtering */
-#define MAC_CONTROL_PB AR_BIT(16) /* Pass Bad frames */
-#define MAC_CONTROL_IF AR_BIT(17) /* Inverse filtering */
-#define MAC_CONTROL_PR AR_BIT(18) /* promiscuous mode (valid frames
- only) */
-#define MAC_CONTROL_PM AR_BIT(19) /* pass multicast */
-#define MAC_CONTROL_F AR_BIT(20) /* full-duplex */
-#define MAC_CONTROL_DRO AR_BIT(23) /* Disable Receive Own */
-#define MAC_CONTROL_HBD AR_BIT(28) /* heart-beat disabled (MUST BE
- SET) */
-#define MAC_CONTROL_BLE AR_BIT(30) /* big endian mode */
-#define MAC_CONTROL_RA AR_BIT(31) /* receive all (valid and invalid
- frames) */
-
-#define MII_ADDR_BUSY AR_BIT(0)
-#define MII_ADDR_WRITE AR_BIT(1)
-#define MII_ADDR_REG_SHIFT 6
-#define MII_ADDR_PHY_SHIFT 11
-#define MII_DATA_SHIFT 0
-
-#define FLOW_CONTROL_FCE AR_BIT(1)
-
-#define DMA_BUS_MODE_SWR AR_BIT(0) /* software reset */
-#define DMA_BUS_MODE_BLE AR_BIT(7) /* big endian mode */
-#define DMA_BUS_MODE_PBL_SHIFT 8 /* programmable burst length 32 */
-#define DMA_BUS_MODE_DBO AR_BIT(20) /* big-endian descriptors */
-
-#define DMA_STATUS_TI AR_BIT(0) /* transmit interrupt */
-#define DMA_STATUS_TPS AR_BIT(1) /* transmit process stopped */
-#define DMA_STATUS_TU AR_BIT(2) /* transmit buffer unavailable */
-#define DMA_STATUS_TJT AR_BIT(3) /* transmit buffer timeout */
-#define DMA_STATUS_UNF AR_BIT(5) /* transmit underflow */
-#define DMA_STATUS_RI AR_BIT(6) /* receive interrupt */
-#define DMA_STATUS_RU AR_BIT(7) /* receive buffer unavailable */
-#define DMA_STATUS_RPS AR_BIT(8) /* receive process stopped */
-#define DMA_STATUS_ETI AR_BIT(10) /* early transmit interrupt */
-#define DMA_STATUS_FBE AR_BIT(13) /* fatal bus interrupt */
-#define DMA_STATUS_ERI AR_BIT(14) /* early receive interrupt */
-#define DMA_STATUS_AIS AR_BIT(15) /* abnormal interrupt summary */
-#define DMA_STATUS_NIS AR_BIT(16) /* normal interrupt summary */
-#define DMA_STATUS_RS_SHIFT 17 /* receive process state */
-#define DMA_STATUS_TS_SHIFT 20 /* transmit process state */
-#define DMA_STATUS_EB_SHIFT 23 /* error bits */
-
-#define DMA_CONTROL_SR AR_BIT(1) /* start receive */
-#define DMA_CONTROL_ST AR_BIT(13) /* start transmit */
-#define DMA_CONTROL_SF AR_BIT(21) /* store and forward */
-
-
-typedef struct {
- volatile unsigned int status; // OWN, Device control and status.
- volatile unsigned int devcs; // pkt Control bits + Length
- volatile unsigned int addr; // Current Address.
- volatile unsigned int descr; // Next descriptor in chain.
-} ar2313_descr_t;
-
-
-#endif // __ARUBA_DMA_H__