diff options
Diffstat (limited to 'target/linux/ar71xx/files-2.6.39/arch')
104 files changed, 15552 insertions, 0 deletions
diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig new file mode 100644 index 000000000..c22cd4abe --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig @@ -0,0 +1,492 @@ +if ATHEROS_AR71XX + +menu "Atheros AR71xx machine selection" +config AR71XX_MACH_ALFA_AP96 + bool "ALFA Network AP96 board support" + select SOC_AR71XX + select AR71XX_DEV_PB42_PCI if PCI + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_USB + +config AR71XX_MACH_HORNET_UB + bool "Alfa Networks Hornet-UB board support" + select SOC_AR933X + select AR71XX_DEV_M25P80 + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_USB + select AR71XX_DEV_AR9XXX_WMAC + +config AR71XX_MACH_ALFA_NX + bool "ALFA Network N2/N5 board support" + select SOC_AR724X + select AR71XX_DEV_AP91_PCI if PCI + select AR71XX_DEV_M25P80 + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + +config AR71XX_MACH_ALL0258N + bool "Allnet ALL0258N support" + select SOC_AR724X + select AR71XX_DEV_M25P80 + select AR71XX_DEV_AP91_PCI if PCI + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + +config AR71XX_MACH_AP81 + bool "Atheros AP81 board support" + select SOC_AR913X + select AR71XX_DEV_M25P80 + select AR71XX_DEV_AR9XXX_WMAC + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_USB + +config AR71XX_MACH_AP83 + bool "Atheros AP83 board support" + select SOC_AR913X + select AR71XX_DEV_AR9XXX_WMAC + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_USB + +config AR71XX_MACH_AP96 + bool "Atheros AP96 board support" + select SOC_AR71XX + select AR71XX_DEV_M25P80 + select AR71XX_DEV_AP94_PCI if PCI + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_USB + +config AR71XX_MACH_AP121 + bool "Atheros AP121 board support" + select AR71XX_DEV_M25P80 + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_USB + select AR71XX_DEV_AR9XXX_WMAC + select SOC_AR933X + +config AR71XX_MACH_DB120 + bool "Atheros DB120 board support" + select SOC_AR934X + select AR71XX_DEV_AR9XXX_WMAC + select AR71XX_DEV_DB120_PCI if PCI + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_USB + +config AR71XX_MACH_DIR_600_A1 + bool "D-Link DIR-600 rev. A1 support" + select SOC_AR724X + select AR71XX_DEV_AP91_PCI if PCI + select AR71XX_DEV_M25P80 + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + select AR71XX_NVRAM + +config AR71XX_MACH_DIR_615_C1 + bool "D-Link DIR-615 rev. C1 support" + select SOC_AR913X + select AR71XX_DEV_M25P80 + select AR71XX_DEV_AR9XXX_WMAC + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + select AR71XX_NVRAM + +config AR71XX_MACH_DIR_825_B1 + bool "D-Link DIR-825 rev. B1 board support" + select SOC_AR71XX + select AR71XX_DEV_M25P80 + select AR71XX_DEV_AP94_PCI if PCI + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_USB + +config AR71XX_MACH_JA76PF + bool "jjPlus JA76PF board support" + select SOC_AR71XX + select AR71XX_DEV_M25P80 + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_PB42_PCI if PCI + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_USB + +config AR71XX_MACH_JWAP003 + bool "jjPlus JWAP003 board support" + select SOC_AR71XX + select AR71XX_DEV_M25P80 + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_PB42_PCI if PCI + select AR71XX_DEV_USB + +config AR71XX_MACH_PB42 + bool "Atheros PB42 board support" + select SOC_AR71XX + select AR71XX_DEV_M25P80 + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_PB42_PCI if PCI + +config AR71XX_MACH_PB44 + bool "Atheros PB44 board support" + select SOC_AR71XX + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_PB42_PCI if PCI + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_USB + +config AR71XX_MACH_PB92 + bool "Atheros PB92 board support" + select SOC_AR724X + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_PB9X_PCI if PCI + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_USB + +config AR71XX_MACH_RW2458N + bool "Redwave RW2458N board support" + select SOC_AR724X + select AR71XX_DEV_M25P80 + select AR71XX_DEV_AP91_PCI if PCI + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_USB + +config AR71XX_MACH_AW_NR580 + bool "AzureWave AW-NR580 board support" + select SOC_AR71XX + select AR71XX_DEV_M25P80 + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_PB42_PCI if PCI + select AR71XX_DEV_LEDS_GPIO + +config AR71XX_MACH_WZR_HP_AG300H + bool "Buffalo WZR-HP-AG300H board support" + select SOC_AR71XX + select AR71XX_DEV_M25P80 + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_USB + +config AR71XX_MACH_WZR_HP_G450H + bool "Buffalo WZR-HP-G450H board support" + select SOC_AR724X + select AR71XX_DEV_M25P80 + select AR71XX_DEV_AP91_PCI if PCI + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_USB + +config AR71XX_MACH_WZR_HP_G300NH + bool "Buffalo WZR-HP-G300NH board support" + select SOC_AR913X + select AR71XX_DEV_AR9XXX_WMAC + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_USB + select RTL8366_SMI + +config AR71XX_MACH_WZR_HP_G300NH2 + bool "Buffalo WZR-HP-G300NH2 board support" + select SOC_AR724X + select AR71XX_DEV_M25P80 + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_AP91_PCI if PCI + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_USB + +config AR71XX_MACH_WHR_HP_G300N + bool "Buffalo WHR-HP-G300N board support" + select SOC_AR724X + select AR71XX_DEV_M25P80 + select AR71XX_DEV_AP91_PCI if PCI + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + +config AR71XX_MACH_WP543 + bool "Compex WP543/WPJ543 board support" + select SOC_AR71XX + select MYLOADER + select AR71XX_DEV_M25P80 + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_PB42_PCI if PCI + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_USB + +config AR71XX_MACH_WRT160NL + bool "Linksys WRT160NL board support" + select SOC_AR913X + select AR71XX_DEV_M25P80 + select AR71XX_DEV_AR9XXX_WMAC + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_USB + select AR71XX_NVRAM + +config AR71XX_MACH_WRT400N + bool "Linksys WRT400N board support" + select SOC_AR71XX + select AR71XX_DEV_AP94_PCI if PCI + select AR71XX_DEV_M25P80 + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + +config AR71XX_MACH_RB4XX + bool "MikroTik RouterBOARD 4xx series support" + select SOC_AR71XX + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_USB + +config AR71XX_MACH_RB750 + bool "MikroTik RouterBOARD 750 support" + select SOC_AR724X + +config AR71XX_MACH_WNDR3700 + bool "NETGEAR WNDR3700 board support" + select SOC_AR71XX + select AR71XX_DEV_M25P80 + select AR71XX_DEV_AP94_PCI if PCI + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_USB + +config AR71XX_MACH_WNR2000 + bool "NETGEAR WNR2000 board support" + select SOC_AR913X + select AR71XX_DEV_M25P80 + select AR71XX_DEV_AR9XXX_WMAC + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + +config AR71XX_MACH_OM2P + bool "OpenMesh OM2P board support" + select SOC_AR724X + select AR71XX_DEV_M25P80 + select AR71XX_DEV_AP91_PCI if PCI + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + +config AR71XX_MACH_MZK_W04NU + bool "Planex MZK-W04NU board support" + select SOC_AR913X + select AR71XX_DEV_M25P80 + select AR71XX_DEV_AR9XXX_WMAC + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_USB + +config AR71XX_MACH_MZK_W300NH + bool "Planex MZK-W300NH board support" + select SOC_AR913X + select AR71XX_DEV_M25P80 + select AR71XX_DEV_AR9XXX_WMAC + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + +config AR71XX_MACH_NBG460N + bool "Zyxel NBG460N/550N/550NH board support" + select SOC_AR913X + select AR71XX_DEV_M25P80 + select AR71XX_DEV_AR9XXX_WMAC + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + +config AR71XX_MACH_TL_MR3020 + bool "TP-LINK TL-MR3020 support" + select SOC_AR933X + select AR71XX_DEV_M25P80 + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_USB + select AR71XX_DEV_AR9XXX_WMAC + +config AR71XX_MACH_TL_MR3X20 + bool "TP-LINK TL-MR3220/3420 support" + select SOC_AR724X + select AR71XX_DEV_M25P80 + select AR71XX_DEV_AP91_PCI if PCI + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_USB + +config AR71XX_MACH_TL_WA901ND + bool "TP-LINK TL-WA901ND support" + select SOC_AR724X + select AR71XX_DEV_M25P80 + select AR71XX_DEV_AP91_PCI if PCI + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + +config AR71XX_MACH_TL_WA901ND_V2 + bool "TP-LINK TL-WA901ND v2 support" + select SOC_AR913X + select AR71XX_DEV_M25P80 + select AR71XX_DEV_AR9XXX_WMAC + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + +config AR71XX_MACH_TL_WR703N + bool "TP-LINK TL-WR703N support" + select SOC_AR933X + select AR71XX_DEV_M25P80 + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_USB + select AR71XX_DEV_AR9XXX_WMAC + +config AR71XX_MACH_TL_WR741ND + bool "TP-LINK TL-WR741ND support" + select SOC_AR724X + select AR71XX_DEV_M25P80 + select AR71XX_DEV_AP91_PCI if PCI + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + +config AR71XX_MACH_TL_WR741ND_V4 + bool "TP-LINK TL-WR741ND v4 support" + select SOC_AR933X + select AR71XX_DEV_M25P80 + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_AR9XXX_WMAC + +config AR71XX_MACH_TL_WR841N_V1 + bool "TP-LINK TL-WR841N v1 support" + select SOC_AR71XX + select AR71XX_DEV_M25P80 + select AR71XX_DEV_PB42_PCI if PCI + select AR71XX_DEV_DSA + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + +config AR71XX_MACH_TL_WR941ND + bool "TP-LINK TL-WR941ND support" + select SOC_AR913X + select AR71XX_DEV_M25P80 + select AR71XX_DEV_AR9XXX_WMAC + select AR71XX_DEV_DSA + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + +config AR71XX_MACH_TL_WR1043ND + bool "TP-LINK TL-WR1043ND support" + select SOC_AR913X + select AR71XX_DEV_M25P80 + select AR71XX_DEV_AR9XXX_WMAC + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_USB + +config AR71XX_MACH_TL_WR2543N + bool "TP-LINK TL-WR2543N/ND support" + select SOC_AR724X + select AR71XX_DEV_AP91_PCI if PCI + select AR71XX_DEV_M25P80 + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_USB + +config AR71XX_MACH_TEW_632BRP + bool "TRENDnet TEW-632BRP support" + select SOC_AR913X + select AR71XX_DEV_M25P80 + select AR71XX_DEV_AR9XXX_WMAC + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + select AR71XX_NVRAM + +config AR71XX_MACH_UBNT + bool "Ubiquiti AR71xx based boards support" + select SOC_AR71XX + select SOC_AR724X + select AR71XX_DEV_M25P80 + select AR71XX_DEV_AP91_PCI if PCI + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_PB42_PCI if PCI + select AR71XX_DEV_USB + +config AR71XX_MACH_EAP7660D + bool "Senao EAP7660D support" + select SOC_AR71XX + select AR71XX_DEV_M25P80 + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + +config AR71XX_MACH_ZCN_1523H + bool "Zcomax ZCN-1523H support" + select SOC_AR724X + select AR71XX_DEV_M25P80 + select AR71XX_DEV_AP91_PCI if PCI + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + +endmenu + +config SOC_AR71XX + bool + select USB_ARCH_HAS_EHCI + select USB_ARCH_HAS_OHCI + +config SOC_AR724X + bool + select USB_ARCH_HAS_EHCI + select USB_ARCH_HAS_OHCI + +config SOC_AR913X + bool + select USB_ARCH_HAS_EHCI + +config SOC_AR934X + bool + select USB_ARCH_HAS_EHCI + +config AR71XX_DEV_M25P80 + def_bool n + +config AR71XX_DEV_AP91_PCI + select AR71XX_PCI_ATH9K_FIXUP + def_bool n + +config AR71XX_DEV_AP94_PCI + select AR71XX_PCI_ATH9K_FIXUP + def_bool n + +config AR71XX_DEV_AR9XXX_WMAC + def_bool n + +config AR71XX_DEV_DB120_PCI + select AR71XX_PCI_ATH9K_FIXUP + def_bool n + +config AR71XX_DEV_DSA + def_bool n + +config AR71XX_DEV_GPIO_BUTTONS + def_bool n + +config AR71XX_DEV_LEDS_GPIO + def_bool n + +config AR71XX_DEV_PB42_PCI + def_bool n + +config AR71XX_DEV_PB9X_PCI + def_bool n + +config AR71XX_DEV_USB + def_bool n + +config AR71XX_NVRAM + def_bool n + +config AR71XX_PCI_ATH9K_FIXUP + def_bool n + +config SOC_AR933X + bool + select USB_ARCH_HAS_EHCI + +endif diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile new file mode 100644 index 000000000..ba12234ea --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile @@ -0,0 +1,80 @@ +# +# Makefile for the Atheros AR71xx SoC specific parts of the kernel +# +# Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> +# Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License version 2 as published +# by the Free Software Foundation. + +obj-y := prom.o irq.o setup.o devices.o gpio.o ar71xx.o + +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-$(CONFIG_PCI) += pci.o + +obj-$(CONFIG_AR71XX_DEV_AP91_PCI) += dev-ap91-pci.o +obj-$(CONFIG_AR71XX_DEV_AP94_PCI) += dev-ap94-pci.o +obj-$(CONFIG_AR71XX_DEV_AR9XXX_WMAC) += dev-ar9xxx-wmac.o +obj-$(CONFIG_AR71XX_DEV_DB120_PCI) += dev-db120-pci.o +obj-$(CONFIG_AR71XX_DEV_DSA) += dev-dsa.o +obj-$(CONFIG_AR71XX_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o +obj-$(CONFIG_AR71XX_DEV_LEDS_GPIO) += dev-leds-gpio.o +obj-$(CONFIG_AR71XX_DEV_M25P80) += dev-m25p80.o +obj-$(CONFIG_AR71XX_DEV_PB42_PCI) += dev-pb42-pci.o +obj-$(CONFIG_AR71XX_DEV_PB9X_PCI) += dev-pb9x-pci.o +obj-$(CONFIG_AR71XX_DEV_USB) += dev-usb.o + +obj-$(CONFIG_AR71XX_NVRAM) += nvram.o +obj-$(CONFIG_AR71XX_PCI_ATH9K_FIXUP) += pci-ath9k-fixup.o + +obj-$(CONFIG_AR71XX_MACH_ALFA_AP96) += mach-alfa-ap96.o +obj-$(CONFIG_AR71XX_MACH_ALFA_NX) += mach-alfa-nx.o +obj-$(CONFIG_AR71XX_MACH_ALL0258N) += mach-all0258n.o +obj-$(CONFIG_AR71XX_MACH_AP121) += mach-ap121.o +obj-$(CONFIG_AR71XX_MACH_AP81) += mach-ap81.o +obj-$(CONFIG_AR71XX_MACH_AP83) += mach-ap83.o +obj-$(CONFIG_AR71XX_MACH_AP96) += mach-ap96.o +obj-$(CONFIG_AR71XX_MACH_AW_NR580) += mach-aw-nr580.o +obj-$(CONFIG_AR71XX_MACH_DB120) += mach-db120.o +obj-$(CONFIG_AR71XX_MACH_DIR_600_A1) += mach-dir-600-a1.o +obj-$(CONFIG_AR71XX_MACH_DIR_615_C1) += mach-dir-615-c1.o +obj-$(CONFIG_AR71XX_MACH_DIR_825_B1) += mach-dir-825-b1.o +obj-$(CONFIG_AR71XX_MACH_EAP7660D) += mach-eap7660d.o +obj-$(CONFIG_AR71XX_MACH_JA76PF) += mach-ja76pf.o +obj-$(CONFIG_AR71XX_MACH_JWAP003) += mach-jwap003.o +obj-$(CONFIG_AR71XX_MACH_HORNET_UB) += mach-hornet-ub.o +obj-$(CONFIG_AR71XX_MACH_MZK_W04NU) += mach-mzk-w04nu.o +obj-$(CONFIG_AR71XX_MACH_MZK_W300NH) += mach-mzk-w300nh.o +obj-$(CONFIG_AR71XX_MACH_NBG460N) += mach-nbg460n.o +obj-$(CONFIG_AR71XX_MACH_OM2P) += mach-om2p.o +obj-$(CONFIG_AR71XX_MACH_PB42) += mach-pb42.o +obj-$(CONFIG_AR71XX_MACH_PB44) += mach-pb44.o +obj-$(CONFIG_AR71XX_MACH_PB92) += mach-pb92.o +obj-$(CONFIG_AR71XX_MACH_RB4XX) += mach-rb4xx.o +obj-$(CONFIG_AR71XX_MACH_RB750) += mach-rb750.o +obj-$(CONFIG_AR71XX_MACH_RW2458N) += mach-rw2458n.o +obj-$(CONFIG_AR71XX_MACH_TEW_632BRP) += mach-tew-632brp.o +obj-$(CONFIG_AR71XX_MACH_TL_MR3020) += mach-tl-mr3020.o +obj-$(CONFIG_AR71XX_MACH_TL_MR3X20) += mach-tl-mr3x20.o +obj-$(CONFIG_AR71XX_MACH_TL_WA901ND) += mach-tl-wa901nd.o +obj-$(CONFIG_AR71XX_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o +obj-$(CONFIG_AR71XX_MACH_TL_WR741ND) += mach-tl-wr741nd.o +obj-$(CONFIG_AR71XX_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o +obj-$(CONFIG_AR71XX_MACH_TL_WR841N_V1) += mach-tl-wr841n.o +obj-$(CONFIG_AR71XX_MACH_TL_WR941ND) += mach-tl-wr941nd.o +obj-$(CONFIG_AR71XX_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o +obj-$(CONFIG_AR71XX_MACH_TL_WR2543N) += mach-tl-wr2543n.o +obj-$(CONFIG_AR71XX_MACH_TL_WR703N) += mach-tl-wr703n.o +obj-$(CONFIG_AR71XX_MACH_UBNT) += mach-ubnt.o +obj-$(CONFIG_AR71XX_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o +obj-$(CONFIG_AR71XX_MACH_WNDR3700) += mach-wndr3700.o +obj-$(CONFIG_AR71XX_MACH_WNR2000) += mach-wnr2000.o +obj-$(CONFIG_AR71XX_MACH_WP543) += mach-wp543.o +obj-$(CONFIG_AR71XX_MACH_WRT160NL) += mach-wrt160nl.o +obj-$(CONFIG_AR71XX_MACH_WRT400N) += mach-wrt400n.o +obj-$(CONFIG_AR71XX_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o +obj-$(CONFIG_AR71XX_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o +obj-$(CONFIG_AR71XX_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o +obj-$(CONFIG_AR71XX_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o +obj-$(CONFIG_AR71XX_MACH_ZCN_1523H) += mach-zcn-1523h.o diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/ar71xx.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/ar71xx.c new file mode 100644 index 000000000..93cbe5331 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/ar71xx.c @@ -0,0 +1,278 @@ +/* + * AR71xx SoC routines + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/mutex.h> +#include <linux/spinlock.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +static DEFINE_MUTEX(ar71xx_flash_mutex); +static DEFINE_SPINLOCK(ar71xx_device_lock); + +void __iomem *ar71xx_ddr_base; +EXPORT_SYMBOL_GPL(ar71xx_ddr_base); + +void __iomem *ar71xx_pll_base; +EXPORT_SYMBOL_GPL(ar71xx_pll_base); + +void __iomem *ar71xx_reset_base; +EXPORT_SYMBOL_GPL(ar71xx_reset_base); + +void __iomem *ar71xx_gpio_base; +EXPORT_SYMBOL_GPL(ar71xx_gpio_base); + +void __iomem *ar71xx_usb_ctrl_base; +EXPORT_SYMBOL_GPL(ar71xx_usb_ctrl_base); + +void ar71xx_device_stop(u32 mask) +{ + unsigned long flags; + u32 mask_inv; + u32 t; + + switch (ar71xx_soc) { + case AR71XX_SOC_AR7130: + case AR71XX_SOC_AR7141: + case AR71XX_SOC_AR7161: + spin_lock_irqsave(&ar71xx_device_lock, flags); + t = ar71xx_reset_rr(AR71XX_RESET_REG_RESET_MODULE); + ar71xx_reset_wr(AR71XX_RESET_REG_RESET_MODULE, t | mask); + spin_unlock_irqrestore(&ar71xx_device_lock, flags); + break; + + case AR71XX_SOC_AR7240: + case AR71XX_SOC_AR7241: + case AR71XX_SOC_AR7242: + mask_inv = mask & RESET_MODULE_USB_OHCI_DLL_7240; + spin_lock_irqsave(&ar71xx_device_lock, flags); + t = ar71xx_reset_rr(AR724X_RESET_REG_RESET_MODULE); + t |= mask; + t &= ~mask_inv; + ar71xx_reset_wr(AR724X_RESET_REG_RESET_MODULE, t); + spin_unlock_irqrestore(&ar71xx_device_lock, flags); + break; + + case AR71XX_SOC_AR9130: + case AR71XX_SOC_AR9132: + spin_lock_irqsave(&ar71xx_device_lock, flags); + t = ar71xx_reset_rr(AR91XX_RESET_REG_RESET_MODULE); + ar71xx_reset_wr(AR91XX_RESET_REG_RESET_MODULE, t | mask); + spin_unlock_irqrestore(&ar71xx_device_lock, flags); + break; + + case AR71XX_SOC_AR9330: + case AR71XX_SOC_AR9331: + spin_lock_irqsave(&ar71xx_device_lock, flags); + t = ar71xx_reset_rr(AR933X_RESET_REG_RESET_MODULE); + ar71xx_reset_wr(AR933X_RESET_REG_RESET_MODULE, t | mask); + spin_unlock_irqrestore(&ar71xx_device_lock, flags); + break; + + case AR71XX_SOC_AR9341: + case AR71XX_SOC_AR9342: + case AR71XX_SOC_AR9344: + spin_lock_irqsave(&ar71xx_device_lock, flags); + t = ar71xx_reset_rr(AR934X_RESET_REG_RESET_MODULE); + ar71xx_reset_wr(AR934X_RESET_REG_RESET_MODULE, t | mask); + spin_unlock_irqrestore(&ar71xx_device_lock, flags); + break; + + default: + BUG(); + } +} +EXPORT_SYMBOL_GPL(ar71xx_device_stop); + +void ar71xx_device_start(u32 mask) +{ + unsigned long flags; + u32 mask_inv; + u32 t; + + switch (ar71xx_soc) { + case AR71XX_SOC_AR7130: + case AR71XX_SOC_AR7141: + case AR71XX_SOC_AR7161: + spin_lock_irqsave(&ar71xx_device_lock, flags); + t = ar71xx_reset_rr(AR71XX_RESET_REG_RESET_MODULE); + ar71xx_reset_wr(AR71XX_RESET_REG_RESET_MODULE, t & ~mask); + spin_unlock_irqrestore(&ar71xx_device_lock, flags); + break; + + case AR71XX_SOC_AR7240: + case AR71XX_SOC_AR7241: + case AR71XX_SOC_AR7242: + mask_inv = mask & RESET_MODULE_USB_OHCI_DLL_7240; + spin_lock_irqsave(&ar71xx_device_lock, flags); + t = ar71xx_reset_rr(AR724X_RESET_REG_RESET_MODULE); + t &= ~mask; + t |= mask_inv; + ar71xx_reset_wr(AR724X_RESET_REG_RESET_MODULE, t); + spin_unlock_irqrestore(&ar71xx_device_lock, flags); + break; + + case AR71XX_SOC_AR9130: + case AR71XX_SOC_AR9132: + spin_lock_irqsave(&ar71xx_device_lock, flags); + t = ar71xx_reset_rr(AR91XX_RESET_REG_RESET_MODULE); + ar71xx_reset_wr(AR91XX_RESET_REG_RESET_MODULE, t & ~mask); + spin_unlock_irqrestore(&ar71xx_device_lock, flags); + break; + + case AR71XX_SOC_AR9330: + case AR71XX_SOC_AR9331: + spin_lock_irqsave(&ar71xx_device_lock, flags); + t = ar71xx_reset_rr(AR933X_RESET_REG_RESET_MODULE); + ar71xx_reset_wr(AR933X_RESET_REG_RESET_MODULE, t & ~mask); + spin_unlock_irqrestore(&ar71xx_device_lock, flags); + break; + + case AR71XX_SOC_AR9341: + case AR71XX_SOC_AR9342: + case AR71XX_SOC_AR9344: + spin_lock_irqsave(&ar71xx_device_lock, flags); + t = ar71xx_reset_rr(AR934X_RESET_REG_RESET_MODULE); + ar71xx_reset_wr(AR934X_RESET_REG_RESET_MODULE, t & ~mask); + spin_unlock_irqrestore(&ar71xx_device_lock, flags); + break; + + default: + BUG(); + } +} +EXPORT_SYMBOL_GPL(ar71xx_device_start); + +void ar71xx_device_reset_rmw(u32 clear, u32 set) +{ + unsigned long flags; + unsigned int reg; + u32 t; + + switch (ar71xx_soc) { + case AR71XX_SOC_AR7130: + case AR71XX_SOC_AR7141: + case AR71XX_SOC_AR7161: + reg = AR71XX_RESET_REG_RESET_MODULE; + break; + + case AR71XX_SOC_AR7240: + case AR71XX_SOC_AR7241: + case AR71XX_SOC_AR7242: + reg = AR724X_RESET_REG_RESET_MODULE; + break; + + case AR71XX_SOC_AR9130: + case AR71XX_SOC_AR9132: + reg = AR91XX_RESET_REG_RESET_MODULE; + break; + + case AR71XX_SOC_AR9330: + case AR71XX_SOC_AR9331: + reg = AR933X_RESET_REG_RESET_MODULE; + break; + + case AR71XX_SOC_AR9341: + case AR71XX_SOC_AR9342: + case AR71XX_SOC_AR9344: + reg = AR934X_RESET_REG_RESET_MODULE; + break; + + default: + BUG(); + } + + spin_lock_irqsave(&ar71xx_device_lock, flags); + t = ar71xx_reset_rr(reg); + t &= ~clear; + t |= set; + ar71xx_reset_wr(reg, t); + spin_unlock_irqrestore(&ar71xx_device_lock, flags); +} +EXPORT_SYMBOL_GPL(ar71xx_device_reset_rmw); + +int ar71xx_device_stopped(u32 mask) +{ + unsigned long flags; + u32 t; + + switch (ar71xx_soc) { + case AR71XX_SOC_AR7130: + case AR71XX_SOC_AR7141: + case AR71XX_SOC_AR7161: + spin_lock_irqsave(&ar71xx_device_lock, flags); + t = ar71xx_reset_rr(AR71XX_RESET_REG_RESET_MODULE); + spin_unlock_irqrestore(&ar71xx_device_lock, flags); + break; + + case AR71XX_SOC_AR7240: + case AR71XX_SOC_AR7241: + case AR71XX_SOC_AR7242: + spin_lock_irqsave(&ar71xx_device_lock, flags); + t = ar71xx_reset_rr(AR724X_RESET_REG_RESET_MODULE); + spin_unlock_irqrestore(&ar71xx_device_lock, flags); + break; + + case AR71XX_SOC_AR9130: + case AR71XX_SOC_AR9132: + spin_lock_irqsave(&ar71xx_device_lock, flags); + t = ar71xx_reset_rr(AR91XX_RESET_REG_RESET_MODULE); + spin_unlock_irqrestore(&ar71xx_device_lock, flags); + break; + + case AR71XX_SOC_AR9330: + case AR71XX_SOC_AR9331: + spin_lock_irqsave(&ar71xx_device_lock, flags); + t = ar71xx_reset_rr(AR933X_RESET_REG_RESET_MODULE); + spin_unlock_irqrestore(&ar71xx_device_lock, flags); + break; + + case AR71XX_SOC_AR9341: + case AR71XX_SOC_AR9342: + case AR71XX_SOC_AR9344: + spin_lock_irqsave(&ar71xx_device_lock, flags); + t = ar71xx_reset_rr(AR934X_RESET_REG_RESET_MODULE); + spin_unlock_irqrestore(&ar71xx_device_lock, flags); + break; + + default: + BUG(); + } + + return ((t & mask) == mask); +} +EXPORT_SYMBOL_GPL(ar71xx_device_stopped); + +void ar71xx_ddr_flush(u32 reg) +{ + ar71xx_ddr_wr(reg, 1); + while ((ar71xx_ddr_rr(reg) & 0x1)) + ; + + ar71xx_ddr_wr(reg, 1); + while ((ar71xx_ddr_rr(reg) & 0x1)) + ; +} +EXPORT_SYMBOL_GPL(ar71xx_ddr_flush); + +void ar71xx_flash_acquire(void) +{ + mutex_lock(&ar71xx_flash_mutex); +} +EXPORT_SYMBOL_GPL(ar71xx_flash_acquire); + +void ar71xx_flash_release(void) +{ + mutex_unlock(&ar71xx_flash_mutex); +} +EXPORT_SYMBOL_GPL(ar71xx_flash_release); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ap91-pci.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ap91-pci.c new file mode 100644 index 000000000..7cd8c6594 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ap91-pci.c @@ -0,0 +1,77 @@ +/* + * Atheros AP91 reference board PCI initialization + * + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/pci.h> +#include <linux/ath9k_platform.h> +#include <linux/delay.h> + +#include <asm/mach-ar71xx/ar71xx.h> +#include <asm/mach-ar71xx/pci.h> + +#include "dev-ap91-pci.h" +#include "pci-ath9k-fixup.h" + +static struct ath9k_platform_data ap91_wmac_data = { + .led_pin = -1, +}; +static char ap91_wmac_mac[6]; + +static struct ar71xx_pci_irq ap91_pci_irqs[] __initdata = { + { + .slot = 0, + .pin = 1, + .irq = AR71XX_PCI_IRQ_DEV0, + } +}; + +static int ap91_pci_plat_dev_init(struct pci_dev *dev) +{ + switch (PCI_SLOT(dev->devfn)) { + case 0: + dev->dev.platform_data = &ap91_wmac_data; + break; + } + + return 0; +} + +__init void ap91_pci_setup_wmac_leds(struct gpio_led *leds, int num_leds) +{ + ap91_wmac_data.leds = leds; + ap91_wmac_data.num_leds = num_leds; +} + +__init void ap91_pci_setup_wmac_led_pin(int pin) +{ + ap91_wmac_data.led_pin = pin; +} + +__init void ap91_pci_setup_wmac_gpio(u32 mask, u32 val) +{ + ap91_wmac_data.gpio_mask = mask; + ap91_wmac_data.gpio_val = val; +} + +void __init ap91_pci_init(u8 *cal_data, u8 *mac_addr) +{ + if (cal_data) + memcpy(ap91_wmac_data.eeprom_data, cal_data, + sizeof(ap91_wmac_data.eeprom_data)); + + if (mac_addr) { + memcpy(ap91_wmac_mac, mac_addr, sizeof(ap91_wmac_mac)); + ap91_wmac_data.macaddr = ap91_wmac_mac; + } + + ar71xx_pci_plat_dev_init = ap91_pci_plat_dev_init; + ar71xx_pci_init(ARRAY_SIZE(ap91_pci_irqs), ap91_pci_irqs); + + pci_enable_ath9k_fixup(0, ap91_wmac_data.eeprom_data); +} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ap91-pci.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ap91-pci.h new file mode 100644 index 000000000..ebcbc4729 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ap91-pci.h @@ -0,0 +1,29 @@ +/* + * Atheros AP91 reference board PCI initialization + * + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _AR71XX_DEV_AP91_PCI_H +#define _AR71XX_DEV_AP91_PCI_H + +#include <linux/leds.h> + +#if defined(CONFIG_AR71XX_DEV_AP91_PCI) +void ap91_pci_init(u8 *cal_data, u8 *mac_addr) __init; +void ap91_pci_setup_wmac_led_pin(int pin) __init; +void ap91_pci_setup_wmac_gpio(u32 mask, u32 val) __init; +void ap91_pci_setup_wmac_leds(struct gpio_led *leds, int num_leds) __init; +#else +static inline void ap91_pci_init(u8 *cal_data, u8 *mac_addr) { } +static inline void ap91_pci_setup_wmac_led_pin(int pin) { } +static inline void ap91_pci_setup_wmac_gpio(u32 mask, u32 gpio) { } +static inline void ap91_pci_setup_wmac_leds(struct gpio_led *leds, int num_leds) { }; +#endif + +#endif /* _AR71XX_DEV_AP91_PCI_H */ + diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ap94-pci.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ap94-pci.c new file mode 100644 index 000000000..05b5be449 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ap94-pci.c @@ -0,0 +1,109 @@ +/* + * Atheros AP94 reference board PCI initialization + * + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/pci.h> +#include <linux/ath9k_platform.h> +#include <linux/delay.h> + +#include <asm/mach-ar71xx/ar71xx.h> +#include <asm/mach-ar71xx/pci.h> + +#include "dev-ap94-pci.h" +#include "pci-ath9k-fixup.h" + +static struct ath9k_platform_data ap94_wmac0_data = { + .led_pin = -1, +}; +static struct ath9k_platform_data ap94_wmac1_data = { + .led_pin = -1, +}; +static char ap94_wmac0_mac[6]; +static char ap94_wmac1_mac[6]; + +static struct ar71xx_pci_irq ap94_pci_irqs[] __initdata = { + { + .slot = 0, + .pin = 1, + .irq = AR71XX_PCI_IRQ_DEV0, + }, { + .slot = 1, + .pin = 1, + .irq = AR71XX_PCI_IRQ_DEV1, + } +}; + +static int ap94_pci_plat_dev_init(struct pci_dev *dev) +{ + switch (PCI_SLOT(dev->devfn)) { + case 17: + dev->dev.platform_data = &ap94_wmac0_data; + break; + + case 18: + dev->dev.platform_data = &ap94_wmac1_data; + break; + } + + return 0; +} + +__init void ap94_pci_setup_wmac_led_pin(unsigned wmac, int pin) +{ + switch (wmac) { + case 0: + ap94_wmac0_data.led_pin = pin; + break; + case 1: + ap94_wmac1_data.led_pin = pin; + break; + } +} + +__init void ap94_pci_setup_wmac_gpio(unsigned wmac, u32 mask, u32 val) +{ + switch (wmac) { + case 0: + ap94_wmac0_data.gpio_mask = mask; + ap94_wmac0_data.gpio_val = val; + break; + case 1: + ap94_wmac1_data.gpio_mask = mask; + ap94_wmac1_data.gpio_val = val; + break; + } +} + +void __init ap94_pci_init(u8 *cal_data0, u8 *mac_addr0, + u8 *cal_data1, u8 *mac_addr1) +{ + if (cal_data0) + memcpy(ap94_wmac0_data.eeprom_data, cal_data0, + sizeof(ap94_wmac0_data.eeprom_data)); + + if (cal_data1) + memcpy(ap94_wmac1_data.eeprom_data, cal_data1, + sizeof(ap94_wmac1_data.eeprom_data)); + + if (mac_addr0) { + memcpy(ap94_wmac0_mac, mac_addr0, sizeof(ap94_wmac0_mac)); + ap94_wmac0_data.macaddr = ap94_wmac0_mac; + } + + if (mac_addr1) { + memcpy(ap94_wmac1_mac, mac_addr1, sizeof(ap94_wmac1_mac)); + ap94_wmac1_data.macaddr = ap94_wmac1_mac; + } + + ar71xx_pci_plat_dev_init = ap94_pci_plat_dev_init; + ar71xx_pci_init(ARRAY_SIZE(ap94_pci_irqs), ap94_pci_irqs); + + pci_enable_ath9k_fixup(17, ap94_wmac0_data.eeprom_data); + pci_enable_ath9k_fixup(18, ap94_wmac1_data.eeprom_data); +} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ap94-pci.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ap94-pci.h new file mode 100644 index 000000000..458452898 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ap94-pci.h @@ -0,0 +1,31 @@ +/* + * Atheros AP94 reference board PCI initialization + * + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _AR71XX_DEV_AP94_PCI_H +#define _AR71XX_DEV_AP94_PCI_H + +#if defined(CONFIG_AR71XX_DEV_AP94_PCI) +void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0, + u8 *cal_data1, u8 *mac_addr1) __init; + +void ap94_pci_setup_wmac_led_pin(unsigned wmac, int pin) __init; +void ap94_pci_setup_wmac_gpio(unsigned wmac, u32 mask, u32 val) __init; + +#else +static inline void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0, + u8 *cal_data1, u8 *mac_addr1) {} + +static inline void ap94_pci_setup_wmac_led_pin(unsigned wmac, int pin) {} +static inline void ap94_pci_setup_wmac_gpio(unsigned wmac, + u32 mask, u32 val) {} +#endif + +#endif /* _AR71XX_DEV_AP94_PCI_H */ + diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ar9xxx-wmac.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ar9xxx-wmac.c new file mode 100644 index 000000000..90db38896 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ar9xxx-wmac.c @@ -0,0 +1,156 @@ +/* + * Atheros AR9XXX SoCs built-in WMAC device support + * + * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Parts of this file are based on Atheros 2.6.15/2.6.31 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/etherdevice.h> +#include <linux/platform_device.h> +#include <linux/ath9k_platform.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "dev-ar9xxx-wmac.h" + +#define MHZ_25 (25 * 1000 * 1000) + +static struct ath9k_platform_data ar9xxx_wmac_data = { + .led_pin = -1, +}; +static char ar9xxx_wmac_mac[6]; + +static struct resource ar9xxx_wmac_resources[] = { + { + /* .start and .end fields are filled dynamically */ + .flags = IORESOURCE_MEM, + }, { + .start = AR71XX_CPU_IRQ_IP2, + .end = AR71XX_CPU_IRQ_IP2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device ar9xxx_wmac_device = { + .name = "ath9k", + .id = -1, + .resource = ar9xxx_wmac_resources, + .num_resources = ARRAY_SIZE(ar9xxx_wmac_resources), + .dev = { + .platform_data = &ar9xxx_wmac_data, + }, +}; + +static void ar913x_wmac_init(void) +{ + ar71xx_device_stop(RESET_MODULE_AMBA2WMAC); + mdelay(10); + + ar71xx_device_start(RESET_MODULE_AMBA2WMAC); + mdelay(10); + + ar9xxx_wmac_resources[0].start = AR91XX_WMAC_BASE; + ar9xxx_wmac_resources[0].end = AR91XX_WMAC_BASE + AR91XX_WMAC_SIZE - 1; +} + +static int ar933x_r1_get_wmac_revision(void) +{ + return ar71xx_soc_rev; +} + +static int ar933x_wmac_reset(void) +{ + unsigned retries = 0; + + ar71xx_device_stop(AR933X_RESET_WMAC); + ar71xx_device_start(AR933X_RESET_WMAC); + + while (1) { + u32 bootstrap; + + bootstrap = ar71xx_reset_rr(AR933X_RESET_REG_BOOTSTRAP); + if ((bootstrap & AR933X_BOOTSTRAP_EEPBUSY) == 0) + return 0; + + if (retries > 20) + break; + + udelay(10000); + retries++; + } + + pr_err("ar93xx: WMAC reset timed out"); + return -ETIMEDOUT; +} + +static void ar933x_wmac_init(void) +{ + ar9xxx_wmac_device.name = "ar933x_wmac"; + ar9xxx_wmac_resources[0].start = AR933X_WMAC_BASE; + ar9xxx_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1; + if (ar71xx_ref_freq == MHZ_25) + ar9xxx_wmac_data.is_clk_25mhz = true; + + if (ar71xx_soc_rev == 1) + ar9xxx_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision; + + ar9xxx_wmac_data.external_reset = ar933x_wmac_reset; + + ar933x_wmac_reset(); +} + +static void ar934x_wmac_init(void) +{ + ar9xxx_wmac_device.name = "ar934x_wmac"; + ar9xxx_wmac_resources[0].start = AR934X_WMAC_BASE; + ar9xxx_wmac_resources[0].end = AR934X_WMAC_BASE + AR934X_WMAC_SIZE - 1; + ar9xxx_wmac_resources[1].start = AR934X_IP2_IRQ_WMAC; + ar9xxx_wmac_resources[1].start = AR934X_IP2_IRQ_WMAC; + if (ar71xx_ref_freq == MHZ_25) + ar9xxx_wmac_data.is_clk_25mhz = true; +} + +void __init ar9xxx_add_device_wmac(u8 *cal_data, u8 *mac_addr) +{ + switch (ar71xx_soc) { + case AR71XX_SOC_AR9130: + case AR71XX_SOC_AR9132: + ar913x_wmac_init(); + break; + + case AR71XX_SOC_AR9330: + case AR71XX_SOC_AR9331: + ar933x_wmac_init(); + break; + + case AR71XX_SOC_AR9341: + case AR71XX_SOC_AR9342: + case AR71XX_SOC_AR9344: + ar934x_wmac_init(); + break; + + default: + BUG(); + } + + if (cal_data) + memcpy(ar9xxx_wmac_data.eeprom_data, cal_data, + sizeof(ar9xxx_wmac_data.eeprom_data)); + + if (mac_addr) { + memcpy(ar9xxx_wmac_mac, mac_addr, sizeof(ar9xxx_wmac_mac)); + ar9xxx_wmac_data.macaddr = ar9xxx_wmac_mac; + } + + platform_device_register(&ar9xxx_wmac_device); +} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ar9xxx-wmac.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ar9xxx-wmac.h new file mode 100644 index 000000000..4fa7ec2d3 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-ar9xxx-wmac.h @@ -0,0 +1,20 @@ +/* + * Atheros AR9XXX SoCs built-in WMAC device support + * + * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Parts of this file are based on Atheros 2.6.15/2.6.31 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _AR71XX_DEV_AR9XXX_WMAC_H +#define _AR71XX_DEV_AR9XXX_WMAC_H + +void ar9xxx_add_device_wmac(u8 *cal_data, u8 *mac_addr) __init; + +#endif /* _AR71XX_DEV_AR9XXX_WMAC_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-db120-pci.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-db120-pci.c new file mode 100644 index 000000000..6e6e58376 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-db120-pci.c @@ -0,0 +1,59 @@ +/* + * Atheros db120 reference board PCI initialization + * + * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * Parts of this file are based on Atheros linux 2.6.31 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/pci.h> +#include <linux/ath9k_platform.h> + +#include <asm/mach-ar71xx/ar71xx.h> +#include <asm/mach-ar71xx/pci.h> + +#include "dev-db120-pci.h" + +static struct ath9k_platform_data db120_wmac_data = { + .led_pin = -1, +}; +static char db120_wmac_mac[6]; + +static struct ar71xx_pci_irq db120_pci_irqs[] __initdata = { + { + .slot = 0, + .pin = 1, + .irq = AR71XX_PCI_IRQ_DEV0, + } +}; + +static int db120_pci_plat_dev_init(struct pci_dev *dev) +{ + switch (PCI_SLOT(dev->devfn)) { + case 0: + dev->dev.platform_data = &db120_wmac_data; + break; + } + + return 0; +} + +void __init db120_pci_init(u8 *cal_data, u8 *mac_addr) +{ + if (cal_data) + memcpy(db120_wmac_data.eeprom_data, cal_data, + sizeof(db120_wmac_data.eeprom_data)); + + if (mac_addr) { + memcpy(db120_wmac_mac, mac_addr, sizeof(db120_wmac_mac)); + db120_wmac_data.macaddr = db120_wmac_mac; + } + + ar71xx_pci_plat_dev_init = db120_pci_plat_dev_init; + ar71xx_pci_init(ARRAY_SIZE(db120_pci_irqs), db120_pci_irqs); +} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-db120-pci.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-db120-pci.h new file mode 100644 index 000000000..b96d98955 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-db120-pci.h @@ -0,0 +1,23 @@ +/* + * Atheros DB120 reference board PCI initialization + * + * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * Parts of this file are based on Atheros linux 2.6.31 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _AR71XX_DEV_DB120_PCI_H +#define _AR71XX_DEV_DB120_PCI_H + +#if defined(CONFIG_AR71XX_DEV_DB120_PCI) +void db120_pci_init(u8 *cal_data, u8 *mac_addr); +#else +static inline void db120_pci_init(u8 *cal_data, u8 *mac_addr) { } +#endif + +#endif /* _AR71XX_DEV_DB120_PCI_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-dsa.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-dsa.c new file mode 100644 index 000000000..8b8fcfac3 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-dsa.c @@ -0,0 +1,38 @@ +/* + * Atheros AR71xx DSA switch device support + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "devices.h" +#include "dev-dsa.h" + +static struct platform_device ar71xx_dsa_switch_device = { + .name = "dsa", + .id = 0, +}; + +void __init ar71xx_add_device_dsa(struct device *netdev, + struct device *miidev, + struct dsa_platform_data *d) +{ + int i; + + d->netdev = netdev; + for (i = 0; i < d->nr_chips; i++) + d->chip[i].mii_bus = miidev; + + ar71xx_dsa_switch_device.dev.platform_data = d; + + platform_device_register(&ar71xx_dsa_switch_device); +} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-dsa.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-dsa.h new file mode 100644 index 000000000..25b988130 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-dsa.h @@ -0,0 +1,21 @@ +/* + * Atheros AR71xx DSA switch device support + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _AR71XX_DEV_DSA_H +#define _AR71XX_DEV_DSA_H + +#include <net/dsa.h> + +void ar71xx_add_device_dsa(struct device *netdev, + struct device *miidev, + struct dsa_platform_data *d) __init; + +#endif /* _AR71XX_DEV_DSA_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-gpio-buttons.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-gpio-buttons.c new file mode 100644 index 000000000..c22e652f1 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-gpio-buttons.c @@ -0,0 +1,58 @@ +/* + * Atheros AR71xx GPIO button support + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "linux/init.h" +#include "linux/slab.h" +#include <linux/platform_device.h> + +#include "dev-gpio-buttons.h" + +void __init ar71xx_register_gpio_keys_polled(int id, + unsigned poll_interval, + unsigned nbuttons, + struct gpio_keys_button *buttons) +{ + struct platform_device *pdev; + struct gpio_keys_platform_data pdata; + struct gpio_keys_button *p; + int err; + + p = kmalloc(nbuttons * sizeof(*p), GFP_KERNEL); + if (!p) + return; + + memcpy(p, buttons, nbuttons * sizeof(*p)); + + pdev = platform_device_alloc("gpio-keys-polled", id); + if (!pdev) + goto err_free_buttons; + + memset(&pdata, 0, sizeof(pdata)); + pdata.poll_interval = poll_interval; + pdata.nbuttons = nbuttons; + pdata.buttons = p; + + err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); + if (err) + goto err_put_pdev; + + err = platform_device_add(pdev); + if (err) + goto err_put_pdev; + + return; + +err_put_pdev: + platform_device_put(pdev); + +err_free_buttons: + kfree(p); +} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-gpio-buttons.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-gpio-buttons.h new file mode 100644 index 000000000..5ed863489 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-gpio-buttons.h @@ -0,0 +1,23 @@ +/* + * Atheros AR71xx GPIO button support + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _AR71XX_DEV_GPIO_BUTTONS_H +#define _AR71XX_DEV_GPIO_BUTTONS_H + +#include <linux/input.h> +#include <linux/gpio_keys.h> + +void ar71xx_register_gpio_keys_polled(int id, + unsigned poll_interval, + unsigned nbuttons, + struct gpio_keys_button *buttons); + +#endif /* _AR71XX_DEV_GPIO_BUTTONS_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-leds-gpio.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-leds-gpio.c new file mode 100644 index 000000000..0fb8c6db6 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-leds-gpio.c @@ -0,0 +1,57 @@ +/* + * Atheros AR71xx GPIO LED device support + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Parts of this file are based on Atheros' 2.6.15 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/platform_device.h> + +#include "dev-leds-gpio.h" + +void __init ar71xx_add_device_leds_gpio(int id, unsigned num_leds, + struct gpio_led *leds) +{ + struct platform_device *pdev; + struct gpio_led_platform_data pdata; + struct gpio_led *p; + int err; + + p = kmalloc(num_leds * sizeof(*p), GFP_KERNEL); + if (!p) + return; + + memcpy(p, leds, num_leds * sizeof(*p)); + + pdev = platform_device_alloc("leds-gpio", id); + if (!pdev) + goto err_free_leds; + + memset(&pdata, 0, sizeof(pdata)); + pdata.num_leds = num_leds; + pdata.leds = p; + + err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); + if (err) + goto err_put_pdev; + + err = platform_device_add(pdev); + if (err) + goto err_put_pdev; + + return; + +err_put_pdev: + platform_device_put(pdev); + +err_free_leds: + kfree(p); +} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-leds-gpio.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-leds-gpio.h new file mode 100644 index 000000000..ab4a89d83 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-leds-gpio.h @@ -0,0 +1,21 @@ +/* + * Atheros AR71xx GPIO LED device support + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _AR71XX_DEV_LEDS_GPIO_H +#define _AR71XX_DEV_LEDS_GPIO_H + +#include <linux/leds.h> + +void ar71xx_add_device_leds_gpio(int id, + unsigned num_leds, + struct gpio_led *leds) __init; + +#endif /* _AR71XX_DEV_LEDS_GPIO_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-m25p80.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-m25p80.c new file mode 100644 index 000000000..cf6580ec0 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-m25p80.c @@ -0,0 +1,100 @@ +/* + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/concat.h> + +#include "devices.h" +#include "dev-m25p80.h" + +static struct spi_board_info ar71xx_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "m25p80", + }, + { + .bus_num = 0, + .chip_select = 1, + .max_speed_hz = 25000000, + .modalias = "m25p80", + } +}; + +void __init ar71xx_add_device_m25p80(struct flash_platform_data *pdata) +{ + ar71xx_spi_info[0].platform_data = pdata; + ar71xx_add_device_spi(NULL, ar71xx_spi_info, 1); +} + +static struct flash_platform_data *multi_pdata; + +static struct mtd_info *concat_devs[2] = { NULL, NULL }; +static struct work_struct mtd_concat_work; + +static void mtd_concat_add_work(struct work_struct *work) +{ + struct mtd_info *mtd; + + mtd = mtd_concat_create(concat_devs, ARRAY_SIZE(concat_devs), "flash"); + +#ifdef CONFIG_MTD_PARTITIONS + add_mtd_partitions(mtd, multi_pdata->parts, multi_pdata->nr_parts); +#else + add_mtd_device(mtd); +#endif +} + +static void mtd_concat_add(struct mtd_info *mtd) +{ + static bool registered = false; + + if (registered) + return; + + if (!strcmp(mtd->name, "spi0.0")) + concat_devs[0] = mtd; + else if (!strcmp(mtd->name, "spi0.1")) + concat_devs[1] = mtd; + else + return; + + if (!concat_devs[0] || !concat_devs[1]) + return; + + registered = true; + INIT_WORK(&mtd_concat_work, mtd_concat_add_work); + schedule_work(&mtd_concat_work); +} + +static void mtd_concat_remove(struct mtd_info *mtd) +{ +} + +static void add_mtd_concat_notifier(void) +{ + static struct mtd_notifier not = { + .add = mtd_concat_add, + .remove = mtd_concat_remove, + }; + + register_mtd_user(¬); +} + + +void __init ar71xx_add_device_m25p80_multi(struct flash_platform_data *pdata) +{ + multi_pdata = pdata; + add_mtd_concat_notifier(); + ar71xx_add_device_spi(NULL, ar71xx_spi_info, ARRAY_SIZE(ar71xx_spi_info)); +} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-m25p80.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-m25p80.h new file mode 100644 index 000000000..f732a8438 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-m25p80.h @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _AR71XX_DEV_M25P80_H +#define _AR71XX_DEV_M25P80_H + +#include <linux/spi/flash.h> + +void ar71xx_add_device_m25p80(struct flash_platform_data *pdata) __init; +void ar71xx_add_device_m25p80_multi(struct flash_platform_data *pdata) __init; + +#endif /* _AR71XX_DEV_M25P80_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-pb42-pci.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-pb42-pci.c new file mode 100644 index 000000000..0678567a2 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-pb42-pci.c @@ -0,0 +1,40 @@ +/* + * Atheros PB42 reference board PCI initialization + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Parts of this file are based on Atheros' 2.6.15 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/pci.h> + +#include <asm/mach-ar71xx/ar71xx.h> +#include <asm/mach-ar71xx/pci.h> + +#include "dev-pb42-pci.h" + +static struct ar71xx_pci_irq pb42_pci_irqs[] __initdata = { + { + .slot = 0, + .pin = 1, + .irq = AR71XX_PCI_IRQ_DEV0, + }, { + .slot = 1, + .pin = 1, + .irq = AR71XX_PCI_IRQ_DEV1, + }, { + .slot = 2, + .pin = 1, + .irq = AR71XX_PCI_IRQ_DEV2, + } +}; + +void __init pb42_pci_init(void) +{ + ar71xx_pci_init(ARRAY_SIZE(pb42_pci_irqs), pb42_pci_irqs); +} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-pb42-pci.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-pb42-pci.h new file mode 100644 index 000000000..f9ef95123 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-pb42-pci.h @@ -0,0 +1,21 @@ +/* + * Atheros PB42 reference board PCI initialization + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _AR71XX_DEV_PB42_PCI_H +#define _AR71XX_DEV_PB42_PCI_H + +#if defined(CONFIG_AR71XX_DEV_PB42_PCI) +void pb42_pci_init(void) __init; +#else +static inline void pb42_pci_init(void) { } +#endif + +#endif /* _AR71XX_DEV_PB42_PCI_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-pb9x-pci.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-pb9x-pci.c new file mode 100644 index 000000000..762bd5534 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-pb9x-pci.c @@ -0,0 +1,33 @@ +/* + * Atheros PB9x reference board PCI initialization + * + * Copyright (C) 2010 Felix Fietkau <nbd@openwrt.org> + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Parts of this file are based on Atheros' 2.6.15 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/pci.h> + +#include <asm/mach-ar71xx/ar71xx.h> +#include <asm/mach-ar71xx/pci.h> + +#include "dev-pb9x-pci.h" + +static struct ar71xx_pci_irq pb9x_pci_irqs[] __initdata = { + { + .slot = 0, + .pin = 1, + .irq = AR71XX_PCI_IRQ_DEV0, + } +}; + +void __init pb9x_pci_init(void) +{ + ar71xx_pci_init(ARRAY_SIZE(pb9x_pci_irqs), pb9x_pci_irqs); +} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-pb9x-pci.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-pb9x-pci.h new file mode 100644 index 000000000..be53f0a66 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-pb9x-pci.h @@ -0,0 +1,22 @@ +/* + * Atheros PB9x reference board PCI initialization + * + * Copyright (C) 2010 Felix Fietkau <nbd@openwrt.org> + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _AR71XX_DEV_PB9X_PCI_H +#define _AR71XX_DEV_PB9X_PCI_H + +#if defined(CONFIG_AR71XX_DEV_PB9X_PCI) +void pb9x_pci_init(void) __init; +#else +static inline void pb9x_pci_init(void) { } +#endif + +#endif /* _AR71XX_DEV_PB9X_PCI_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-usb.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-usb.c new file mode 100644 index 000000000..57c7ef292 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-usb.c @@ -0,0 +1,246 @@ +/* + * Atheros AR71xx USB host device support + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Parts of this file are based on Atheros' 2.6.15 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> + +#include <asm/mach-ar71xx/ar71xx.h> +#include <asm/mach-ar71xx/platform.h> + +#include "dev-usb.h" + +/* + * OHCI (USB full speed host controller) + */ +static struct resource ar71xx_ohci_resources[] = { + [0] = { + .start = AR71XX_OHCI_BASE, + .end = AR71XX_OHCI_BASE + AR71XX_OHCI_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AR71XX_MISC_IRQ_OHCI, + .end = AR71XX_MISC_IRQ_OHCI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource ar7240_ohci_resources[] = { + [0] = { + .start = AR7240_OHCI_BASE, + .end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AR71XX_CPU_IRQ_USB, + .end = AR71XX_CPU_IRQ_USB, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 ar71xx_ohci_dmamask = DMA_BIT_MASK(32); +static struct platform_device ar71xx_ohci_device = { + .name = "ar71xx-ohci", + .id = -1, + .resource = ar71xx_ohci_resources, + .num_resources = ARRAY_SIZE(ar71xx_ohci_resources), + .dev = { + .dma_mask = &ar71xx_ohci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +/* + * EHCI (USB high/full speed host controller) + */ +static struct resource ar71xx_ehci_resources[] = { + [0] = { + .start = AR71XX_EHCI_BASE, + .end = AR71XX_EHCI_BASE + AR71XX_EHCI_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AR71XX_CPU_IRQ_USB, + .end = AR71XX_CPU_IRQ_USB, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 ar71xx_ehci_dmamask = DMA_BIT_MASK(32); +static struct ar71xx_ehci_platform_data ar71xx_ehci_data; + +static struct platform_device ar71xx_ehci_device = { + .name = "ar71xx-ehci", + .id = -1, + .resource = ar71xx_ehci_resources, + .num_resources = ARRAY_SIZE(ar71xx_ehci_resources), + .dev = { + .dma_mask = &ar71xx_ehci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &ar71xx_ehci_data, + }, +}; + +#define AR71XX_USB_RESET_MASK \ + (RESET_MODULE_USB_HOST | RESET_MODULE_USB_PHY \ + | RESET_MODULE_USB_OHCI_DLL) + +#define AR7240_USB_RESET_MASK \ + (RESET_MODULE_USB_HOST | RESET_MODULE_USB_OHCI_DLL_7240) + +static void __init ar71xx_usb_setup(void) +{ + ar71xx_device_stop(AR71XX_USB_RESET_MASK); + mdelay(1000); + ar71xx_device_start(AR71XX_USB_RESET_MASK); + + /* Turning on the Buff and Desc swap bits */ + ar71xx_usb_ctrl_wr(USB_CTRL_REG_CONFIG, 0xf0000); + + /* WAR for HW bug. Here it adjusts the duration between two SOFS */ + ar71xx_usb_ctrl_wr(USB_CTRL_REG_FLADJ, 0x20c00); + + mdelay(900); + + platform_device_register(&ar71xx_ohci_device); + platform_device_register(&ar71xx_ehci_device); +} + +static void __init ar7240_usb_setup(void) +{ + ar71xx_device_stop(AR7240_USB_RESET_MASK); + mdelay(1000); + ar71xx_device_start(AR7240_USB_RESET_MASK); + + /* WAR for HW bug. Here it adjusts the duration between two SOFS */ + ar71xx_usb_ctrl_wr(USB_CTRL_REG_FLADJ, 0x3); + + ar71xx_ohci_device.resource = ar7240_ohci_resources; + ar71xx_ohci_device.num_resources = ARRAY_SIZE(ar7240_ohci_resources); + platform_device_register(&ar71xx_ohci_device); +} + +static void __init ar7241_usb_setup(void) +{ + ar71xx_device_start(AR724X_RESET_USBSUS_OVERRIDE); + mdelay(10); + + ar71xx_device_start(AR724X_RESET_USB_HOST); + mdelay(10); + + ar71xx_device_start(AR724X_RESET_USB_PHY); + mdelay(10); + + ar71xx_ehci_data.is_ar91xx = 1; + ar71xx_ehci_device.resource = ar7240_ohci_resources; + ar71xx_ehci_device.num_resources = ARRAY_SIZE(ar7240_ohci_resources); + platform_device_register(&ar71xx_ehci_device); +} + +static void __init ar91xx_usb_setup(void) +{ + ar71xx_device_stop(RESET_MODULE_USBSUS_OVERRIDE); + mdelay(10); + + ar71xx_device_start(RESET_MODULE_USB_HOST); + mdelay(10); + + ar71xx_device_start(RESET_MODULE_USB_PHY); + mdelay(10); + + ar71xx_ehci_data.is_ar91xx = 1; + platform_device_register(&ar71xx_ehci_device); +} + +static void __init ar933x_usb_setup(void) +{ + ar71xx_device_reset_rmw(0, AR933X_RESET_USBSUS_OVERRIDE); + mdelay(10); + + ar71xx_device_reset_rmw(AR933X_RESET_USB_HOST, + AR933X_RESET_USBSUS_OVERRIDE); + mdelay(10); + + ar71xx_device_reset_rmw(AR933X_RESET_USB_PHY, + AR933X_RESET_USBSUS_OVERRIDE); + mdelay(10); + + ar71xx_ehci_data.is_ar91xx = 1; + platform_device_register(&ar71xx_ehci_device); +} + +static void __init ar934x_usb_setup(void) +{ + u32 bootstrap; + + bootstrap = ar71xx_reset_rr(AR934X_RESET_REG_BOOTSTRAP); + if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE) + return; + + ar71xx_device_stop(AR934X_RESET_USBSUS_OVERRIDE); + udelay(1000); + + ar71xx_device_start(AR934X_RESET_USB_PHY); + udelay(1000); + + ar71xx_device_start(AR934X_RESET_USB_PHY_ANALOG); + udelay(1000); + + ar71xx_device_start(AR934X_RESET_USB_HOST); + udelay(1000); + + ar71xx_ehci_data.is_ar91xx = 1; + platform_device_register(&ar71xx_ehci_device); +} + +void __init ar71xx_add_device_usb(void) +{ + switch (ar71xx_soc) { + case AR71XX_SOC_AR7240: + ar7240_usb_setup(); + break; + + case AR71XX_SOC_AR7241: + case AR71XX_SOC_AR7242: + ar7241_usb_setup(); + break; + + case AR71XX_SOC_AR7130: + case AR71XX_SOC_AR7141: + case AR71XX_SOC_AR7161: + ar71xx_usb_setup(); + break; + + case AR71XX_SOC_AR9130: + case AR71XX_SOC_AR9132: + ar91xx_usb_setup(); + break; + + case AR71XX_SOC_AR9330: + case AR71XX_SOC_AR9331: + ar933x_usb_setup(); + break; + + case AR71XX_SOC_AR9341: + case AR71XX_SOC_AR9342: + case AR71XX_SOC_AR9344: + ar934x_usb_setup(); + break; + + default: + BUG(); + } +} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-usb.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-usb.h new file mode 100644 index 000000000..aa49f539c --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/dev-usb.h @@ -0,0 +1,17 @@ +/* + * Atheros AR71xx USB host device support + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _AR71XX_DEV_USB_H +#define _AR71XX_DEV_USB_H + +void ar71xx_add_device_usb(void) __init; + +#endif /* _AR71XX_DEV_USB_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/devices.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/devices.c new file mode 100644 index 000000000..75b24b004 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/devices.c @@ -0,0 +1,1076 @@ +/* + * Atheros AR71xx SoC platform devices + * + * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Parts of this file are based on Atheros 2.6.15 BSP + * Parts of this file are based on Atheros 2.6.31 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/etherdevice.h> +#include <linux/platform_device.h> +#include <linux/serial_8250.h> + +#include <asm/mach-ar71xx/ar71xx.h> +#include <asm/mach-ar71xx/ar933x_uart_platform.h> + +#include "devices.h" + +unsigned char ar71xx_mac_base[ETH_ALEN] __initdata; + +static struct resource ar71xx_uart_resources[] = { + { + .start = AR71XX_UART_BASE, + .end = AR71XX_UART_BASE + AR71XX_UART_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +#define AR71XX_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP) +static struct plat_serial8250_port ar71xx_uart_data[] = { + { + .mapbase = AR71XX_UART_BASE, + .irq = AR71XX_MISC_IRQ_UART, + .flags = AR71XX_UART_FLAGS, + .iotype = UPIO_MEM32, + .regshift = 2, + }, { + /* terminating entry */ + } +}; + +static struct platform_device ar71xx_uart_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .resource = ar71xx_uart_resources, + .num_resources = ARRAY_SIZE(ar71xx_uart_resources), + .dev = { + .platform_data = ar71xx_uart_data + }, +}; + +static struct resource ar933x_uart_resources[] = { + { + .start = AR933X_UART_BASE, + .end = AR933X_UART_BASE + AR71XX_UART_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = AR71XX_MISC_IRQ_UART, + .end = AR71XX_MISC_IRQ_UART, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct ar933x_uart_platform_data ar933x_uart_data; +static struct platform_device ar933x_uart_device = { + .name = "ar933x-uart", + .id = -1, + .resource = ar933x_uart_resources, + .num_resources = ARRAY_SIZE(ar933x_uart_resources), + .dev = { + .platform_data = &ar933x_uart_data, + }, +}; + +void __init ar71xx_add_device_uart(void) +{ + struct platform_device *pdev; + + switch (ar71xx_soc) { + case AR71XX_SOC_AR7130: + case AR71XX_SOC_AR7141: + case AR71XX_SOC_AR7161: + case AR71XX_SOC_AR7240: + case AR71XX_SOC_AR7241: + case AR71XX_SOC_AR7242: + case AR71XX_SOC_AR9130: + case AR71XX_SOC_AR9132: + pdev = &ar71xx_uart_device; + ar71xx_uart_data[0].uartclk = ar71xx_ahb_freq; + break; + + case AR71XX_SOC_AR9330: + case AR71XX_SOC_AR9331: + pdev = &ar933x_uart_device; + ar933x_uart_data.uartclk = ar71xx_ref_freq; + break; + + case AR71XX_SOC_AR9341: + case AR71XX_SOC_AR9342: + case AR71XX_SOC_AR9344: + pdev = &ar71xx_uart_device; + ar71xx_uart_data[0].uartclk = ar71xx_ref_freq; + break; + + default: + BUG(); + } + + platform_device_register(pdev); +} + +static struct resource ar71xx_mdio0_resources[] = { + { + .name = "mdio_base", + .flags = IORESOURCE_MEM, + .start = AR71XX_GE0_BASE, + .end = AR71XX_GE0_BASE + 0x200 - 1, + } +}; + +static struct ag71xx_mdio_platform_data ar71xx_mdio0_data; + +struct platform_device ar71xx_mdio0_device = { + .name = "ag71xx-mdio", + .id = 0, + .resource = ar71xx_mdio0_resources, + .num_resources = ARRAY_SIZE(ar71xx_mdio0_resources), + .dev = { + .platform_data = &ar71xx_mdio0_data, + }, +}; + +static struct resource ar71xx_mdio1_resources[] = { + { + .name = "mdio_base", + .flags = IORESOURCE_MEM, + .start = AR71XX_GE1_BASE, + .end = AR71XX_GE1_BASE + 0x200 - 1, + } +}; + +static struct ag71xx_mdio_platform_data ar71xx_mdio1_data; + +struct platform_device ar71xx_mdio1_device = { + .name = "ag71xx-mdio", + .id = 1, + .resource = ar71xx_mdio1_resources, + .num_resources = ARRAY_SIZE(ar71xx_mdio1_resources), + .dev = { + .platform_data = &ar71xx_mdio1_data, + }, +}; + +static void ar71xx_set_pll(u32 cfg_reg, u32 pll_reg, u32 pll_val, u32 shift) +{ + void __iomem *base; + u32 t; + + base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE); + + t = __raw_readl(base + cfg_reg); + t &= ~(3 << shift); + t |= (2 << shift); + __raw_writel(t, base + cfg_reg); + udelay(100); + + __raw_writel(pll_val, base + pll_reg); + + t |= (3 << shift); + __raw_writel(t, base + cfg_reg); + udelay(100); + + t &= ~(3 << shift); + __raw_writel(t, base + cfg_reg); + udelay(100); + + printk(KERN_DEBUG "ar71xx: pll_reg %#x: %#x\n", + (unsigned int)(base + pll_reg), __raw_readl(base + pll_reg)); + + iounmap(base); +} + +static void __init ar71xx_mii_ctrl_set_if(unsigned int reg, + unsigned int mii_if) +{ + void __iomem *base; + u32 t; + + base = ioremap(AR71XX_MII_BASE, AR71XX_MII_SIZE); + + t = __raw_readl(base + reg); + t &= ~(MII_CTRL_IF_MASK); + t |= (mii_if & MII_CTRL_IF_MASK); + __raw_writel(t, base + reg); + + iounmap(base); +} + +static void ar71xx_mii_ctrl_set_speed(unsigned int reg, unsigned int speed) +{ + void __iomem *base; + unsigned int mii_speed; + u32 t; + + switch (speed) { + case SPEED_10: + mii_speed = MII_CTRL_SPEED_10; + break; + case SPEED_100: + mii_speed = MII_CTRL_SPEED_100; + break; + case SPEED_1000: + mii_speed = MII_CTRL_SPEED_1000; + break; + default: + BUG(); + } + + base = ioremap(AR71XX_MII_BASE, AR71XX_MII_SIZE); + + t = __raw_readl(base + reg); + t &= ~(MII_CTRL_SPEED_MASK << MII_CTRL_SPEED_SHIFT); + t |= mii_speed << MII_CTRL_SPEED_SHIFT; + __raw_writel(t, base + reg); + + iounmap(base); +} + +void __init ar71xx_add_device_mdio(unsigned int id, u32 phy_mask) +{ + struct platform_device *mdio_dev; + struct ag71xx_mdio_platform_data *mdio_data; + unsigned int max_id; + + if (ar71xx_soc == AR71XX_SOC_AR9341 || + ar71xx_soc == AR71XX_SOC_AR9342 || + ar71xx_soc == AR71XX_SOC_AR9344) + max_id = 1; + else + max_id = 0; + + if (id > max_id) { + printk(KERN_ERR "ar71xx: invalid MDIO id %u\n", id); + return; + } + + switch (ar71xx_soc) { + case AR71XX_SOC_AR7241: + case AR71XX_SOC_AR9330: + case AR71XX_SOC_AR9331: + mdio_dev = &ar71xx_mdio1_device; + mdio_data = &ar71xx_mdio1_data; + break; + + case AR71XX_SOC_AR9341: + case AR71XX_SOC_AR9342: + case AR71XX_SOC_AR9344: + if (id == 0) { + mdio_dev = &ar71xx_mdio0_device; + mdio_data = &ar71xx_mdio0_data; + } else { + mdio_dev = &ar71xx_mdio1_device; + mdio_data = &ar71xx_mdio1_data; + } + break; + + case AR71XX_SOC_AR7242: + ar71xx_set_pll(AR71XX_PLL_REG_SEC_CONFIG, + AR7242_PLL_REG_ETH0_INT_CLOCK, 0x62000000, + AR71XX_ETH0_PLL_SHIFT); + /* fall through */ + default: + mdio_dev = &ar71xx_mdio0_device; + mdio_data = &ar71xx_mdio0_data; + break; + } + + mdio_data->phy_mask = phy_mask; + + switch (ar71xx_soc) { + case AR71XX_SOC_AR7240: + case AR71XX_SOC_AR7241: + case AR71XX_SOC_AR9330: + case AR71XX_SOC_AR9331: + mdio_data->is_ar7240 = 1; + break; + + case AR71XX_SOC_AR9341: + case AR71XX_SOC_AR9342: + case AR71XX_SOC_AR9344: + if (id == 1) + mdio_data->is_ar7240 = 1; + break; + + default: + break; + } + + platform_device_register(mdio_dev); +} + +struct ar71xx_eth_pll_data ar71xx_eth0_pll_data; +struct ar71xx_eth_pll_data ar71xx_eth1_pll_data; + +static u32 ar71xx_get_eth_pll(unsigned int mac, int speed) +{ + struct ar71xx_eth_pll_data *pll_data; + u32 pll_val; + + switch (mac) { + case 0: + pll_data = &ar71xx_eth0_pll_data; + break; + case 1: + pll_data = &ar71xx_eth1_pll_data; + break; + default: + BUG(); + } + + switch (speed) { + case SPEED_10: + pll_val = pll_data->pll_10; + break; + case SPEED_100: + pll_val = pll_data->pll_100; + break; + case SPEED_1000: + pll_val = pll_data->pll_1000; + break; + default: + BUG(); + } + + return pll_val; +} + +static void ar71xx_set_speed_ge0(int speed) +{ + u32 val = ar71xx_get_eth_pll(0, speed); + + ar71xx_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH0_INT_CLOCK, + val, AR71XX_ETH0_PLL_SHIFT); + ar71xx_mii_ctrl_set_speed(MII_REG_MII0_CTRL, speed); +} + +static void ar71xx_set_speed_ge1(int speed) +{ + u32 val = ar71xx_get_eth_pll(1, speed); + + ar71xx_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH1_INT_CLOCK, + val, AR71XX_ETH1_PLL_SHIFT); + ar71xx_mii_ctrl_set_speed(MII_REG_MII1_CTRL, speed); +} + +static void ar724x_set_speed_ge0(int speed) +{ + /* TODO */ +} + +static void ar724x_set_speed_ge1(int speed) +{ + /* TODO */ +} + +static void ar7242_set_speed_ge0(int speed) +{ + u32 val = ar71xx_get_eth_pll(0, speed); + void __iomem *base; + + base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE); + __raw_writel(val, base + AR7242_PLL_REG_ETH0_INT_CLOCK); + iounmap(base); +} + +static void ar91xx_set_speed_ge0(int speed) +{ + u32 val = ar71xx_get_eth_pll(0, speed); + + ar71xx_set_pll(AR91XX_PLL_REG_ETH_CONFIG, AR91XX_PLL_REG_ETH0_INT_CLOCK, + val, AR91XX_ETH0_PLL_SHIFT); + ar71xx_mii_ctrl_set_speed(MII_REG_MII0_CTRL, speed); +} + +static void ar91xx_set_speed_ge1(int speed) +{ + u32 val = ar71xx_get_eth_pll(1, speed); + + ar71xx_set_pll(AR91XX_PLL_REG_ETH_CONFIG, AR91XX_PLL_REG_ETH1_INT_CLOCK, + val, AR91XX_ETH1_PLL_SHIFT); + ar71xx_mii_ctrl_set_speed(MII_REG_MII1_CTRL, speed); +} + +static void ar933x_set_speed_ge0(int speed) +{ + /* TODO */ +} + +static void ar933x_set_speed_ge1(int speed) +{ + /* TODO */ +} + +static void ar934x_set_speed_ge0(int speed) +{ + /* TODO */ +} + +static void ar934x_set_speed_ge1(int speed) +{ + /* TODO */ +} + +static void ar71xx_ddr_flush_ge0(void) +{ + ar71xx_ddr_flush(AR71XX_DDR_REG_FLUSH_GE0); +} + +static void ar71xx_ddr_flush_ge1(void) +{ + ar71xx_ddr_flush(AR71XX_DDR_REG_FLUSH_GE1); +} + +static void ar724x_ddr_flush_ge0(void) +{ + ar71xx_ddr_flush(AR724X_DDR_REG_FLUSH_GE0); +} + +static void ar724x_ddr_flush_ge1(void) +{ + ar71xx_ddr_flush(AR724X_DDR_REG_FLUSH_GE1); +} + +static void ar91xx_ddr_flush_ge0(void) +{ + ar71xx_ddr_flush(AR91XX_DDR_REG_FLUSH_GE0); +} + +static void ar91xx_ddr_flush_ge1(void) +{ + ar71xx_ddr_flush(AR91XX_DDR_REG_FLUSH_GE1); +} + +static void ar933x_ddr_flush_ge0(void) +{ + ar71xx_ddr_flush(AR933X_DDR_REG_FLUSH_GE0); +} + +static void ar933x_ddr_flush_ge1(void) +{ + ar71xx_ddr_flush(AR933X_DDR_REG_FLUSH_GE1); +} + +static void ar934x_ddr_flush_ge0(void) +{ + ar71xx_ddr_flush(AR934X_DDR_REG_FLUSH_GE0); +} + +static void ar934x_ddr_flush_ge1(void) +{ + ar71xx_ddr_flush(AR934X_DDR_REG_FLUSH_GE1); +} + +static struct resource ar71xx_eth0_resources[] = { + { + .name = "mac_base", + .flags = IORESOURCE_MEM, + .start = AR71XX_GE0_BASE, + .end = AR71XX_GE0_BASE + 0x200 - 1, + }, { + .name = "mac_irq", + .flags = IORESOURCE_IRQ, + .start = AR71XX_CPU_IRQ_GE0, + .end = AR71XX_CPU_IRQ_GE0, + }, +}; + +struct ag71xx_platform_data ar71xx_eth0_data = { + .reset_bit = RESET_MODULE_GE0_MAC, +}; + +struct platform_device ar71xx_eth0_device = { + .name = "ag71xx", + .id = 0, + .resource = ar71xx_eth0_resources, + .num_resources = ARRAY_SIZE(ar71xx_eth0_resources), + .dev = { + .platform_data = &ar71xx_eth0_data, + }, +}; + +static struct resource ar71xx_eth1_resources[] = { + { + .name = "mac_base", + .flags = IORESOURCE_MEM, + .start = AR71XX_GE1_BASE, + .end = AR71XX_GE1_BASE + 0x200 - 1, + }, { + .name = "mac_irq", + .flags = IORESOURCE_IRQ, + .start = AR71XX_CPU_IRQ_GE1, + .end = AR71XX_CPU_IRQ_GE1, + }, +}; + +struct ag71xx_platform_data ar71xx_eth1_data = { + .reset_bit = RESET_MODULE_GE1_MAC, +}; + +struct platform_device ar71xx_eth1_device = { + .name = "ag71xx", + .id = 1, + .resource = ar71xx_eth1_resources, + .num_resources = ARRAY_SIZE(ar71xx_eth1_resources), + .dev = { + .platform_data = &ar71xx_eth1_data, + }, +}; + +struct ag71xx_switch_platform_data ar71xx_switch_data; + +#define AR71XX_PLL_VAL_1000 0x00110000 +#define AR71XX_PLL_VAL_100 0x00001099 +#define AR71XX_PLL_VAL_10 0x00991099 + +#define AR724X_PLL_VAL_1000 0x00110000 +#define AR724X_PLL_VAL_100 0x00001099 +#define AR724X_PLL_VAL_10 0x00991099 + +#define AR7242_PLL_VAL_1000 0x16000000 +#define AR7242_PLL_VAL_100 0x00000101 +#define AR7242_PLL_VAL_10 0x00001616 + +#define AR91XX_PLL_VAL_1000 0x1a000000 +#define AR91XX_PLL_VAL_100 0x13000a44 +#define AR91XX_PLL_VAL_10 0x00441099 + +#define AR933X_PLL_VAL_1000 0x00110000 +#define AR933X_PLL_VAL_100 0x00001099 +#define AR933X_PLL_VAL_10 0x00991099 + +#define AR934X_PLL_VAL_1000 0x00110000 +#define AR934X_PLL_VAL_100 0x00001099 +#define AR934X_PLL_VAL_10 0x00991099 + +static void __init ar71xx_init_eth_pll_data(unsigned int id) +{ + struct ar71xx_eth_pll_data *pll_data; + u32 pll_10, pll_100, pll_1000; + + switch (id) { + case 0: + pll_data = &ar71xx_eth0_pll_data; + break; + case 1: + pll_data = &ar71xx_eth1_pll_data; + break; + default: + BUG(); + } + + switch (ar71xx_soc) { + case AR71XX_SOC_AR7130: + case AR71XX_SOC_AR7141: + case AR71XX_SOC_AR7161: + pll_10 = AR71XX_PLL_VAL_10; + pll_100 = AR71XX_PLL_VAL_100; + pll_1000 = AR71XX_PLL_VAL_1000; + break; + + case AR71XX_SOC_AR7240: + case AR71XX_SOC_AR7241: + pll_10 = AR724X_PLL_VAL_10; + pll_100 = AR724X_PLL_VAL_100; + pll_1000 = AR724X_PLL_VAL_1000; + break; + + case AR71XX_SOC_AR7242: + pll_10 = AR7242_PLL_VAL_10; + pll_100 = AR7242_PLL_VAL_100; + pll_1000 = AR7242_PLL_VAL_1000; + break; + + case AR71XX_SOC_AR9130: + case AR71XX_SOC_AR9132: + pll_10 = AR91XX_PLL_VAL_10; + pll_100 = AR91XX_PLL_VAL_100; + pll_1000 = AR91XX_PLL_VAL_1000; + break; + + case AR71XX_SOC_AR9330: + case AR71XX_SOC_AR9331: + pll_10 = AR933X_PLL_VAL_10; + pll_100 = AR933X_PLL_VAL_100; + pll_1000 = AR933X_PLL_VAL_1000; + break; + + case AR71XX_SOC_AR9341: + case AR71XX_SOC_AR9342: + case AR71XX_SOC_AR9344: + pll_10 = AR934X_PLL_VAL_10; + pll_100 = AR934X_PLL_VAL_100; + pll_1000 = AR934X_PLL_VAL_1000; + break; + + default: + BUG(); + } + + if (!pll_data->pll_10) + pll_data->pll_10 = pll_10; + + if (!pll_data->pll_100) + pll_data->pll_100 = pll_100; + + if (!pll_data->pll_1000) + pll_data->pll_1000 = pll_1000; +} + +static int __init ar71xx_setup_phy_if_mode(unsigned int id, + struct ag71xx_platform_data *pdata) +{ + unsigned int mii_if; + + switch (id) { + case 0: + switch (ar71xx_soc) { + case AR71XX_SOC_AR7130: + case AR71XX_SOC_AR7141: + case AR71XX_SOC_AR7161: + case AR71XX_SOC_AR9130: + case AR71XX_SOC_AR9132: + switch (pdata->phy_if_mode) { + case PHY_INTERFACE_MODE_MII: + mii_if = MII0_CTRL_IF_MII; + break; + case PHY_INTERFACE_MODE_GMII: + mii_if = MII0_CTRL_IF_GMII; + break; + case PHY_INTERFACE_MODE_RGMII: + mii_if = MII0_CTRL_IF_RGMII; + break; + case PHY_INTERFACE_MODE_RMII: + mii_if = MII0_CTRL_IF_RMII; + break; + default: + return -EINVAL; + } + ar71xx_mii_ctrl_set_if(MII_REG_MII0_CTRL, mii_if); + break; + + case AR71XX_SOC_AR7240: + case AR71XX_SOC_AR7241: + case AR71XX_SOC_AR9330: + case AR71XX_SOC_AR9331: + pdata->phy_if_mode = PHY_INTERFACE_MODE_MII; + break; + + case AR71XX_SOC_AR7242: + /* FIXME */ + + case AR71XX_SOC_AR9341: + case AR71XX_SOC_AR9342: + case AR71XX_SOC_AR9344: + switch (pdata->phy_if_mode) { + case PHY_INTERFACE_MODE_MII: + case PHY_INTERFACE_MODE_GMII: + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RMII: + break; + default: + return -EINVAL; + } + break; + + default: + BUG(); + } + break; + case 1: + switch (ar71xx_soc) { + case AR71XX_SOC_AR7130: + case AR71XX_SOC_AR7141: + case AR71XX_SOC_AR7161: + case AR71XX_SOC_AR9130: + case AR71XX_SOC_AR9132: + switch (pdata->phy_if_mode) { + case PHY_INTERFACE_MODE_RMII: + mii_if = MII1_CTRL_IF_RMII; + break; + case PHY_INTERFACE_MODE_RGMII: + mii_if = MII1_CTRL_IF_RGMII; + break; + default: + return -EINVAL; + } + ar71xx_mii_ctrl_set_if(MII_REG_MII1_CTRL, mii_if); + break; + + case AR71XX_SOC_AR7240: + case AR71XX_SOC_AR7241: + case AR71XX_SOC_AR9330: + case AR71XX_SOC_AR9331: + pdata->phy_if_mode = PHY_INTERFACE_MODE_GMII; + break; + + case AR71XX_SOC_AR7242: + /* FIXME */ + + case AR71XX_SOC_AR9341: + case AR71XX_SOC_AR9342: + case AR71XX_SOC_AR9344: + switch (pdata->phy_if_mode) { + case PHY_INTERFACE_MODE_MII: + case PHY_INTERFACE_MODE_GMII: + break; + default: + return -EINVAL; + } + break; + + default: + BUG(); + } + break; + } + + return 0; +} + +static int ar71xx_eth_instance __initdata; +void __init ar71xx_add_device_eth(unsigned int id) +{ + struct platform_device *pdev; + struct ag71xx_platform_data *pdata; + int err; + + if (id > 1) { + printk(KERN_ERR "ar71xx: invalid ethernet id %d\n", id); + return; + } + + ar71xx_init_eth_pll_data(id); + + if (id == 0) + pdev = &ar71xx_eth0_device; + else + pdev = &ar71xx_eth1_device; + + pdata = pdev->dev.platform_data; + + err = ar71xx_setup_phy_if_mode(id, pdata); + if (err) { + printk(KERN_ERR + "ar71xx: invalid PHY interface mode for GE%u\n", id); + return; + } + + switch (ar71xx_soc) { + case AR71XX_SOC_AR7130: + if (id == 0) { + pdata->ddr_flush = ar71xx_ddr_flush_ge0; + pdata->set_speed = ar71xx_set_speed_ge0; + } else { + pdata->ddr_flush = ar71xx_ddr_flush_ge1; + pdata->set_speed = ar71xx_set_speed_ge1; + } + break; + + case AR71XX_SOC_AR7141: + case AR71XX_SOC_AR7161: + if (id == 0) { + pdata->ddr_flush = ar71xx_ddr_flush_ge0; + pdata->set_speed = ar71xx_set_speed_ge0; + } else { + pdata->ddr_flush = ar71xx_ddr_flush_ge1; + pdata->set_speed = ar71xx_set_speed_ge1; + } + pdata->has_gbit = 1; + break; + + case AR71XX_SOC_AR7242: + if (id == 0) { + pdata->reset_bit |= AR724X_RESET_GE0_MDIO | + RESET_MODULE_GE0_PHY; + pdata->ddr_flush = ar724x_ddr_flush_ge0; + pdata->set_speed = ar7242_set_speed_ge0; + } else { + pdata->reset_bit |= AR724X_RESET_GE1_MDIO | + RESET_MODULE_GE1_PHY; + pdata->ddr_flush = ar724x_ddr_flush_ge1; + pdata->set_speed = ar724x_set_speed_ge1; + } + pdata->has_gbit = 1; + pdata->is_ar724x = 1; + + if (!pdata->fifo_cfg1) + pdata->fifo_cfg1 = 0x0010ffff; + if (!pdata->fifo_cfg2) + pdata->fifo_cfg2 = 0x015500aa; + if (!pdata->fifo_cfg3) + pdata->fifo_cfg3 = 0x01f00140; + break; + + case AR71XX_SOC_AR7241: + if (id == 0) + pdata->reset_bit |= AR724X_RESET_GE0_MDIO; + else + pdata->reset_bit |= AR724X_RESET_GE1_MDIO; + /* fall through */ + case AR71XX_SOC_AR7240: + if (id == 0) { + pdata->reset_bit |= RESET_MODULE_GE0_PHY; + pdata->ddr_flush = ar724x_ddr_flush_ge0; + pdata->set_speed = ar724x_set_speed_ge0; + + pdata->phy_mask = BIT(4); + } else { + pdata->reset_bit |= RESET_MODULE_GE1_PHY; + pdata->ddr_flush = ar724x_ddr_flush_ge1; + pdata->set_speed = ar724x_set_speed_ge1; + + pdata->speed = SPEED_1000; + pdata->duplex = DUPLEX_FULL; + pdata->switch_data = &ar71xx_switch_data; + } + pdata->has_gbit = 1; + pdata->is_ar724x = 1; + if (ar71xx_soc == AR71XX_SOC_AR7240) + pdata->is_ar7240 = 1; + + if (!pdata->fifo_cfg1) + pdata->fifo_cfg1 = 0x0010ffff; + if (!pdata->fifo_cfg2) + pdata->fifo_cfg2 = 0x015500aa; + if (!pdata->fifo_cfg3) + pdata->fifo_cfg3 = 0x01f00140; + break; + + case AR71XX_SOC_AR9130: + if (id == 0) { + pdata->ddr_flush = ar91xx_ddr_flush_ge0; + pdata->set_speed = ar91xx_set_speed_ge0; + } else { + pdata->ddr_flush = ar91xx_ddr_flush_ge1; + pdata->set_speed = ar91xx_set_speed_ge1; + } + pdata->is_ar91xx = 1; + break; + + case AR71XX_SOC_AR9132: + if (id == 0) { + pdata->ddr_flush = ar91xx_ddr_flush_ge0; + pdata->set_speed = ar91xx_set_speed_ge0; + } else { + pdata->ddr_flush = ar91xx_ddr_flush_ge1; + pdata->set_speed = ar91xx_set_speed_ge1; + } + pdata->is_ar91xx = 1; + pdata->has_gbit = 1; + break; + + case AR71XX_SOC_AR9330: + case AR71XX_SOC_AR9331: + if (id == 0) { + pdata->reset_bit = AR933X_RESET_GE0_MAC | + AR933X_RESET_GE0_MDIO; + pdata->ddr_flush = ar933x_ddr_flush_ge0; + pdata->set_speed = ar933x_set_speed_ge0; + + pdata->phy_mask = BIT(4); + } else { + pdata->reset_bit = AR933X_RESET_GE1_MAC | + AR933X_RESET_GE1_MDIO; + pdata->ddr_flush = ar933x_ddr_flush_ge1; + pdata->set_speed = ar933x_set_speed_ge1; + + pdata->speed = SPEED_1000; + pdata->duplex = DUPLEX_FULL; + pdata->switch_data = &ar71xx_switch_data; + } + + pdata->has_gbit = 1; + pdata->is_ar724x = 1; + + if (!pdata->fifo_cfg1) + pdata->fifo_cfg1 = 0x0010ffff; + if (!pdata->fifo_cfg2) + pdata->fifo_cfg2 = 0x015500aa; + if (!pdata->fifo_cfg3) + pdata->fifo_cfg3 = 0x01f00140; + break; + + case AR71XX_SOC_AR9341: + case AR71XX_SOC_AR9342: + case AR71XX_SOC_AR9344: + if (id == 0) { + pdata->reset_bit = AR934X_RESET_GE0_MAC | + AR934X_RESET_GE0_MDIO; + pdata->ddr_flush =ar934x_ddr_flush_ge0; + pdata->set_speed = ar934x_set_speed_ge0; + } else { + pdata->reset_bit = AR934X_RESET_GE1_MAC | + AR934X_RESET_GE1_MDIO; + pdata->ddr_flush = ar934x_ddr_flush_ge1; + pdata->set_speed = ar934x_set_speed_ge1; + + pdata->switch_data = &ar71xx_switch_data; + } + + pdata->has_gbit = 1; + pdata->is_ar724x = 1; + + if (!pdata->fifo_cfg1) + pdata->fifo_cfg1 = 0x0010ffff; + if (!pdata->fifo_cfg2) + pdata->fifo_cfg2 = 0x015500aa; + if (!pdata->fifo_cfg3) + pdata->fifo_cfg3 = 0x01f00140; + break; + + default: + BUG(); + } + + switch (pdata->phy_if_mode) { + case PHY_INTERFACE_MODE_GMII: + case PHY_INTERFACE_MODE_RGMII: + if (!pdata->has_gbit) { + printk(KERN_ERR "ar71xx: no gbit available on eth%d\n", + id); + return; + } + /* fallthrough */ + default: + break; + } + + if (!is_valid_ether_addr(pdata->mac_addr)) { + random_ether_addr(pdata->mac_addr); + printk(KERN_DEBUG + "ar71xx: using random MAC address for eth%d\n", + ar71xx_eth_instance); + } + + if (pdata->mii_bus_dev == NULL) { + switch (ar71xx_soc) { + case AR71XX_SOC_AR9341: + case AR71XX_SOC_AR9342: + case AR71XX_SOC_AR9344: + if (id == 0) + pdata->mii_bus_dev = &ar71xx_mdio0_device.dev; + else + pdata->mii_bus_dev = &ar71xx_mdio1_device.dev; + break; + + case AR71XX_SOC_AR7241: + case AR71XX_SOC_AR9330: + case AR71XX_SOC_AR9331: + pdata->mii_bus_dev = &ar71xx_mdio1_device.dev; + break; + + default: + pdata->mii_bus_dev = &ar71xx_mdio0_device.dev; + break; + } + } + + /* Reset the device */ + ar71xx_device_stop(pdata->reset_bit); + mdelay(100); + + ar71xx_device_start(pdata->reset_bit); + mdelay(100); + + platform_device_register(pdev); + ar71xx_eth_instance++; +} + +static struct resource ar71xx_spi_resources[] = { + [0] = { + .start = AR71XX_SPI_BASE, + .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device ar71xx_spi_device = { + .name = "ar71xx-spi", + .id = -1, + .resource = ar71xx_spi_resources, + .num_resources = ARRAY_SIZE(ar71xx_spi_resources), +}; + +void __init ar71xx_add_device_spi(struct ar71xx_spi_platform_data *pdata, + struct spi_board_info const *info, + unsigned n) +{ + spi_register_board_info(info, n); + ar71xx_spi_device.dev.platform_data = pdata; + platform_device_register(&ar71xx_spi_device); +} + +void __init ar71xx_add_device_wdt(void) +{ + platform_device_register_simple("ar71xx-wdt", -1, NULL, 0); +} + +void __init ar71xx_set_mac_base(unsigned char *mac) +{ + memcpy(ar71xx_mac_base, mac, ETH_ALEN); +} + +void __init ar71xx_parse_mac_addr(char *mac_str) +{ + u8 tmp[ETH_ALEN]; + int t; + + t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", + &tmp[0], &tmp[1], &tmp[2], &tmp[3], &tmp[4], &tmp[5]); + + if (t != ETH_ALEN) + t = sscanf(mac_str, "%02hhx.%02hhx.%02hhx.%02hhx.%02hhx.%02hhx", + &tmp[0], &tmp[1], &tmp[2], &tmp[3], &tmp[4], &tmp[5]); + + if (t == ETH_ALEN) + ar71xx_set_mac_base(tmp); + else + printk(KERN_DEBUG "ar71xx: failed to parse mac address " + "\"%s\"\n", mac_str); +} + +static int __init ar71xx_ethaddr_setup(char *str) +{ + ar71xx_parse_mac_addr(str); + return 1; +} +__setup("ethaddr=", ar71xx_ethaddr_setup); + +static int __init ar71xx_kmac_setup(char *str) +{ + ar71xx_parse_mac_addr(str); + return 1; +} +__setup("kmac=", ar71xx_kmac_setup); + +void __init ar71xx_init_mac(unsigned char *dst, const unsigned char *src, + int offset) +{ + int t; + + if (!is_valid_ether_addr(src)) { + memset(dst, '\0', ETH_ALEN); + return; + } + + t = (((u32) src[3]) << 16) + (((u32) src[4]) << 8) + ((u32) src[5]); + t += offset; + + dst[0] = src[0]; + dst[1] = src[1]; + dst[2] = src[2]; + dst[3] = (t >> 16) & 0xff; + dst[4] = (t >> 8) & 0xff; + dst[5] = t & 0xff; +} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/devices.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/devices.h new file mode 100644 index 000000000..0f75fe7d8 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/devices.h @@ -0,0 +1,53 @@ +/* + * Atheros AR71xx SoC device definitions + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __AR71XX_DEVICES_H +#define __AR71XX_DEVICES_H + +#include <asm/mach-ar71xx/platform.h> + +struct platform_device; + +void ar71xx_add_device_spi(struct ar71xx_spi_platform_data *pdata, + struct spi_board_info const *info, + unsigned n) __init; + +extern unsigned char ar71xx_mac_base[] __initdata; +void ar71xx_parse_mac_addr(char *mac_str) __init; +void ar71xx_init_mac(unsigned char *dst, const unsigned char *src, + int offset) __init; + +struct ar71xx_eth_pll_data { + u32 pll_10; + u32 pll_100; + u32 pll_1000; +}; + +extern struct ar71xx_eth_pll_data ar71xx_eth0_pll_data; +extern struct ar71xx_eth_pll_data ar71xx_eth1_pll_data; + +extern struct ag71xx_platform_data ar71xx_eth0_data; +extern struct ag71xx_platform_data ar71xx_eth1_data; +extern struct platform_device ar71xx_eth0_device; +extern struct platform_device ar71xx_eth1_device; +void ar71xx_add_device_eth(unsigned int id) __init; + +extern struct ag71xx_switch_platform_data ar71xx_switch_data; + +extern struct platform_device ar71xx_mdio0_device; +extern struct platform_device ar71xx_mdio1_device; +void ar71xx_add_device_mdio(unsigned int id, u32 phy_mask) __init; + +void ar71xx_add_device_uart(void) __init; + +void ar71xx_add_device_wdt(void) __init; + +#endif /* __AR71XX_DEVICES_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/early_printk.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/early_printk.c new file mode 100644 index 000000000..c85a04d2c --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/early_printk.c @@ -0,0 +1,96 @@ +/* + * Atheros AR7xxx/AR9xxx SoC early printk support + * + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/serial_reg.h> +#include <asm/addrspace.h> + +#include <asm/mach-ar71xx/ar71xx.h> +#include <asm/mach-ar71xx/ar933x_uart.h> + +static void (*_prom_putchar) (unsigned char); + +static inline void prom_putchar_wait(void __iomem *reg, u32 mask, u32 val) +{ + u32 t; + + do { + t = __raw_readl(reg); + if ((t & mask) == val) + break; + } while (1); +} + +static void prom_putchar_ar71xx(unsigned char ch) +{ + void __iomem *base = (void __iomem *)(KSEG1ADDR(AR71XX_UART_BASE)); + + prom_putchar_wait(base + UART_LSR * 4, UART_LSR_THRE, UART_LSR_THRE); + __raw_writel(ch, base + UART_TX * 4); + prom_putchar_wait(base + UART_LSR * 4, UART_LSR_THRE, UART_LSR_THRE); +} + +static void prom_putchar_ar933x(unsigned char ch) +{ + void __iomem *base = (void __iomem *)(KSEG1ADDR(AR933X_UART_BASE)); + + prom_putchar_wait(base + AR933X_UART_DATA_REG, AR933X_UART_DATA_TX_CSR, + AR933X_UART_DATA_TX_CSR); + __raw_writel(AR933X_UART_DATA_TX_CSR | ch, base + AR933X_UART_DATA_REG); + prom_putchar_wait(base + AR933X_UART_DATA_REG, AR933X_UART_DATA_TX_CSR, + AR933X_UART_DATA_TX_CSR); +} + +static void prom_putchar_dummy(unsigned char ch) +{ + /* nothing to do */ +} + +static void prom_putchar_init(void) +{ + void __iomem *base; + u32 id; + + base = (void __iomem *)(KSEG1ADDR(AR71XX_RESET_BASE)); + id = __raw_readl(base + AR71XX_RESET_REG_REV_ID); + id &= REV_ID_MAJOR_MASK; + + switch (id) { + case REV_ID_MAJOR_AR71XX: + case REV_ID_MAJOR_AR7240: + case REV_ID_MAJOR_AR7241: + case REV_ID_MAJOR_AR7242: + case REV_ID_MAJOR_AR913X: + case REV_ID_MAJOR_AR9341: + case REV_ID_MAJOR_AR9342: + case REV_ID_MAJOR_AR9344: + _prom_putchar = prom_putchar_ar71xx; + break; + + case REV_ID_MAJOR_AR9330: + case REV_ID_MAJOR_AR9331: + _prom_putchar = prom_putchar_ar933x; + break; + + default: + _prom_putchar = prom_putchar_dummy; + break; + } +} + +void prom_putchar(unsigned char ch) +{ + if (!_prom_putchar) + prom_putchar_init(); + + _prom_putchar(ch); +} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/gpio.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/gpio.c new file mode 100644 index 000000000..91c838345 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/gpio.c @@ -0,0 +1,302 @@ +/* + * Atheros AR7XXX/AR9XXX SoC GPIO API support + * + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/gpio.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +static DEFINE_SPINLOCK(ar71xx_gpio_lock); + +unsigned long ar71xx_gpio_count; +EXPORT_SYMBOL(ar71xx_gpio_count); + +void __ar71xx_gpio_set_value(unsigned gpio, int value) +{ + void __iomem *base = ar71xx_gpio_base; + + if (value) + __raw_writel(1 << gpio, base + AR71XX_GPIO_REG_SET); + else + __raw_writel(1 << gpio, base + AR71XX_GPIO_REG_CLEAR); +} +EXPORT_SYMBOL(__ar71xx_gpio_set_value); + +int __ar71xx_gpio_get_value(unsigned gpio) +{ + return (__raw_readl(ar71xx_gpio_base + AR71XX_GPIO_REG_IN) >> gpio) & 1; +} +EXPORT_SYMBOL(__ar71xx_gpio_get_value); + +static int ar71xx_gpio_get_value(struct gpio_chip *chip, unsigned offset) +{ + return __ar71xx_gpio_get_value(offset); +} + +static void ar71xx_gpio_set_value(struct gpio_chip *chip, + unsigned offset, int value) +{ + __ar71xx_gpio_set_value(offset, value); +} + +static int ar71xx_gpio_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + void __iomem *base = ar71xx_gpio_base; + unsigned long flags; + + spin_lock_irqsave(&ar71xx_gpio_lock, flags); + + __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << offset), + base + AR71XX_GPIO_REG_OE); + + spin_unlock_irqrestore(&ar71xx_gpio_lock, flags); + + return 0; +} + +static int ar71xx_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + void __iomem *base = ar71xx_gpio_base; + unsigned long flags; + + spin_lock_irqsave(&ar71xx_gpio_lock, flags); + + if (value) + __raw_writel(1 << offset, base + AR71XX_GPIO_REG_SET); + else + __raw_writel(1 << offset, base + AR71XX_GPIO_REG_CLEAR); + + __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) | (1 << offset), + base + AR71XX_GPIO_REG_OE); + + spin_unlock_irqrestore(&ar71xx_gpio_lock, flags); + + return 0; +} + +static int ar934x_gpio_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + void __iomem *base = ar71xx_gpio_base; + unsigned long flags; + + spin_lock_irqsave(&ar71xx_gpio_lock, flags); + + __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) | (1 << offset), + base + AR71XX_GPIO_REG_OE); + + spin_unlock_irqrestore(&ar71xx_gpio_lock, flags); + + return 0; +} + +static int ar934x_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + void __iomem *base = ar71xx_gpio_base; + unsigned long flags; + + spin_lock_irqsave(&ar71xx_gpio_lock, flags); + + if (value) + __raw_writel(1 << offset, base + AR71XX_GPIO_REG_SET); + else + __raw_writel(1 << offset, base + AR71XX_GPIO_REG_CLEAR); + + __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << offset), + base + AR71XX_GPIO_REG_OE); + + spin_unlock_irqrestore(&ar71xx_gpio_lock, flags); + + return 0; +} + +static struct gpio_chip ar71xx_gpio_chip = { + .label = "ar71xx", + .get = ar71xx_gpio_get_value, + .set = ar71xx_gpio_set_value, + .direction_input = ar71xx_gpio_direction_input, + .direction_output = ar71xx_gpio_direction_output, + .base = 0, + .ngpio = AR71XX_GPIO_COUNT, +}; + +void ar71xx_gpio_function_enable(u32 mask) +{ + void __iomem *base = ar71xx_gpio_base; + unsigned long flags; + unsigned int reg; + + if (ar71xx_soc == AR71XX_SOC_AR9341 || + ar71xx_soc == AR71XX_SOC_AR9342 || + ar71xx_soc == AR71XX_SOC_AR9344) { + reg = AR934X_GPIO_REG_FUNC; + } else { + reg = AR71XX_GPIO_REG_FUNC; + } + + spin_lock_irqsave(&ar71xx_gpio_lock, flags); + + __raw_writel(__raw_readl(base + reg) | mask, base + reg); + /* flush write */ + (void) __raw_readl(base + reg); + + spin_unlock_irqrestore(&ar71xx_gpio_lock, flags); +} + +void ar71xx_gpio_function_disable(u32 mask) +{ + void __iomem *base = ar71xx_gpio_base; + unsigned long flags; + unsigned int reg; + + if (ar71xx_soc == AR71XX_SOC_AR9341 || + ar71xx_soc == AR71XX_SOC_AR9342 || + ar71xx_soc == AR71XX_SOC_AR9344) { + reg = AR934X_GPIO_REG_FUNC; + } else { + reg = AR71XX_GPIO_REG_FUNC; + } + + spin_lock_irqsave(&ar71xx_gpio_lock, flags); + + __raw_writel(__raw_readl(base + reg) & ~mask, base + reg); + /* flush write */ + (void) __raw_readl(base + reg); + + spin_unlock_irqrestore(&ar71xx_gpio_lock, flags); +} + +void ar71xx_gpio_function_setup(u32 set, u32 clear) +{ + void __iomem *base = ar71xx_gpio_base; + unsigned long flags; + unsigned int reg; + + if (ar71xx_soc == AR71XX_SOC_AR9341 || + ar71xx_soc == AR71XX_SOC_AR9342 || + ar71xx_soc == AR71XX_SOC_AR9344) { + reg = AR934X_GPIO_REG_FUNC; + } else { + reg = AR71XX_GPIO_REG_FUNC; + } + + spin_lock_irqsave(&ar71xx_gpio_lock, flags); + + __raw_writel((__raw_readl(base + reg) & ~clear) | set, base + reg); + /* flush write */ + (void) __raw_readl(base + reg); + + spin_unlock_irqrestore(&ar71xx_gpio_lock, flags); +} +EXPORT_SYMBOL(ar71xx_gpio_function_setup); + +void __init ar71xx_gpio_output_select(unsigned gpio, u8 val) +{ + void __iomem *base = ar71xx_gpio_base; + unsigned long flags; + unsigned int reg; + u32 t, s; + + if (ar71xx_soc != AR71XX_SOC_AR9341 && + ar71xx_soc != AR71XX_SOC_AR9342 && + ar71xx_soc != AR71XX_SOC_AR9344) + return; + + if (gpio >= AR934X_GPIO_COUNT) + return; + + reg = AR934X_GPIO_REG_OUT_FUNC0 + 4 * (gpio / 4); + s = 8 * (gpio % 4); + + spin_lock_irqsave(&ar71xx_gpio_lock, flags); + + t = __raw_readl(base + reg); + t &= ~(0xff << s); + t |= val << s; + __raw_writel(t, base + reg); + + /* flush write */ + (void) __raw_readl(base + reg); + + spin_unlock_irqrestore(&ar71xx_gpio_lock, flags); +} + +void __init ar71xx_gpio_init(void) +{ + int err; + + if (!request_mem_region(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE, + "AR71xx GPIO controller")) + panic("cannot allocate AR71xx GPIO registers page"); + + switch (ar71xx_soc) { + case AR71XX_SOC_AR7130: + case AR71XX_SOC_AR7141: + case AR71XX_SOC_AR7161: + ar71xx_gpio_chip.ngpio = AR71XX_GPIO_COUNT; + break; + + case AR71XX_SOC_AR7240: + ar71xx_gpio_chip.ngpio = AR7240_GPIO_COUNT; + break; + + case AR71XX_SOC_AR7241: + case AR71XX_SOC_AR7242: + ar71xx_gpio_chip.ngpio = AR7241_GPIO_COUNT; + break; + + case AR71XX_SOC_AR9130: + case AR71XX_SOC_AR9132: + ar71xx_gpio_chip.ngpio = AR91XX_GPIO_COUNT; + break; + + case AR71XX_SOC_AR9330: + case AR71XX_SOC_AR9331: + ar71xx_gpio_chip.ngpio = AR933X_GPIO_COUNT; + break; + + case AR71XX_SOC_AR9341: + case AR71XX_SOC_AR9342: + case AR71XX_SOC_AR9344: + ar71xx_gpio_chip.ngpio = AR934X_GPIO_COUNT; + ar71xx_gpio_chip.direction_input = ar934x_gpio_direction_input; + ar71xx_gpio_chip.direction_output = ar934x_gpio_direction_output; + break; + + default: + BUG(); + } + + err = gpiochip_add(&ar71xx_gpio_chip); + if (err) + panic("cannot add AR71xx GPIO chip, error=%d", err); +} + +int gpio_to_irq(unsigned gpio) +{ + return AR71XX_GPIO_IRQ(gpio); +} +EXPORT_SYMBOL(gpio_to_irq); + +int irq_to_gpio(unsigned irq) +{ + return irq - AR71XX_GPIO_IRQ_BASE; +} +EXPORT_SYMBOL(irq_to_gpio); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/irq.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/irq.c new file mode 100644 index 000000000..6d744daef --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/irq.c @@ -0,0 +1,416 @@ +/* + * Atheros AR71xx SoC specific interrupt handling + * + * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> + * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Parts of this file are based on Atheros 2.6.15 BSP + * Parts of this file are based on Atheros 2.6.31 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> + +#include <asm/irq_cpu.h> +#include <asm/mipsregs.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +static void ar71xx_gpio_irq_dispatch(void) +{ + void __iomem *base = ar71xx_gpio_base; + u32 pending; + + pending = __raw_readl(base + AR71XX_GPIO_REG_INT_PENDING) & + __raw_readl(base + AR71XX_GPIO_REG_INT_ENABLE); + + if (pending) + do_IRQ(AR71XX_GPIO_IRQ_BASE + fls(pending) - 1); + else + spurious_interrupt(); +} + +static void ar71xx_gpio_irq_unmask(struct irq_data *d) +{ + unsigned int irq = d->irq - AR71XX_GPIO_IRQ_BASE; + void __iomem *base = ar71xx_gpio_base; + u32 t; + + t = __raw_readl(base + AR71XX_GPIO_REG_INT_ENABLE); + __raw_writel(t | (1 << irq), base + AR71XX_GPIO_REG_INT_ENABLE); + + /* flush write */ + (void) __raw_readl(base + AR71XX_GPIO_REG_INT_ENABLE); +} + +static void ar71xx_gpio_irq_mask(struct irq_data *d) +{ + unsigned int irq = d->irq - AR71XX_GPIO_IRQ_BASE; + void __iomem *base = ar71xx_gpio_base; + u32 t; + + t = __raw_readl(base + AR71XX_GPIO_REG_INT_ENABLE); + __raw_writel(t & ~(1 << irq), base + AR71XX_GPIO_REG_INT_ENABLE); + + /* flush write */ + (void) __raw_readl(base + AR71XX_GPIO_REG_INT_ENABLE); +} + +static struct irq_chip ar71xx_gpio_irq_chip = { + .name = "AR71XX GPIO", + .irq_unmask = ar71xx_gpio_irq_unmask, + .irq_mask = ar71xx_gpio_irq_mask, + .irq_mask_ack = ar71xx_gpio_irq_mask, +}; + +static struct irqaction ar71xx_gpio_irqaction = { + .handler = no_action, + .name = "cascade [AR71XX GPIO]", +}; + +#define GPIO_INT_ALL 0xffff + +static void __init ar71xx_gpio_irq_init(void) +{ + void __iomem *base = ar71xx_gpio_base; + int i; + + __raw_writel(0, base + AR71XX_GPIO_REG_INT_ENABLE); + __raw_writel(0, base + AR71XX_GPIO_REG_INT_PENDING); + + /* setup type of all GPIO interrupts to level sensitive */ + __raw_writel(GPIO_INT_ALL, base + AR71XX_GPIO_REG_INT_TYPE); + + /* setup polarity of all GPIO interrupts to active high */ + __raw_writel(GPIO_INT_ALL, base + AR71XX_GPIO_REG_INT_POLARITY); + + for (i = AR71XX_GPIO_IRQ_BASE; + i < AR71XX_GPIO_IRQ_BASE + AR71XX_GPIO_IRQ_COUNT; i++) + irq_set_chip_and_handler(i, &ar71xx_gpio_irq_chip, + handle_level_irq); + + setup_irq(AR71XX_MISC_IRQ_GPIO, &ar71xx_gpio_irqaction); +} + +static void ar71xx_misc_irq_dispatch(void) +{ + u32 pending; + + pending = ar71xx_reset_rr(AR71XX_RESET_REG_MISC_INT_STATUS) + & ar71xx_reset_rr(AR71XX_RESET_REG_MISC_INT_ENABLE); + + if (pending & MISC_INT_UART) + do_IRQ(AR71XX_MISC_IRQ_UART); + + else if (pending & MISC_INT_DMA) + do_IRQ(AR71XX_MISC_IRQ_DMA); + + else if (pending & MISC_INT_PERFC) + do_IRQ(AR71XX_MISC_IRQ_PERFC); + + else if (pending & MISC_INT_TIMER) + do_IRQ(AR71XX_MISC_IRQ_TIMER); + + else if (pending & MISC_INT_OHCI) + do_IRQ(AR71XX_MISC_IRQ_OHCI); + + else if (pending & MISC_INT_ERROR) + do_IRQ(AR71XX_MISC_IRQ_ERROR); + + else if (pending & MISC_INT_GPIO) + ar71xx_gpio_irq_dispatch(); + + else if (pending & MISC_INT_WDOG) + do_IRQ(AR71XX_MISC_IRQ_WDOG); + + else if (pending & MISC_INT_TIMER2) + do_IRQ(AR71XX_MISC_IRQ_TIMER2); + + else if (pending & MISC_INT_TIMER3) + do_IRQ(AR71XX_MISC_IRQ_TIMER3); + + else if (pending & MISC_INT_TIMER4) + do_IRQ(AR71XX_MISC_IRQ_TIMER4); + + else if (pending & MISC_INT_DDR_PERF) + do_IRQ(AR71XX_MISC_IRQ_DDR_PERF); + + else if (pending & MISC_INT_ENET_LINK) + do_IRQ(AR71XX_MISC_IRQ_ENET_LINK); + + else + spurious_interrupt(); +} + +static void ar71xx_misc_irq_unmask(struct irq_data *d) +{ + unsigned int irq = d->irq - AR71XX_MISC_IRQ_BASE; + void __iomem *base = ar71xx_reset_base; + u32 t; + + t = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE); + __raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_MISC_INT_ENABLE); + + /* flush write */ + (void) __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE); +} + +static void ar71xx_misc_irq_mask(struct irq_data *d) +{ + unsigned int irq = d->irq - AR71XX_MISC_IRQ_BASE; + void __iomem *base = ar71xx_reset_base; + u32 t; + + t = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE); + __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_MISC_INT_ENABLE); + + /* flush write */ + (void) __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE); +} + +static void ar724x_misc_irq_ack(struct irq_data *d) +{ + unsigned int irq = d->irq - AR71XX_MISC_IRQ_BASE; + void __iomem *base = ar71xx_reset_base; + u32 t; + + t = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_STATUS); + __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_MISC_INT_STATUS); + + /* flush write */ + (void) __raw_readl(base + AR71XX_RESET_REG_MISC_INT_STATUS); +} + +static struct irq_chip ar71xx_misc_irq_chip = { + .name = "AR71XX MISC", + .irq_unmask = ar71xx_misc_irq_unmask, + .irq_mask = ar71xx_misc_irq_mask, +}; + +static struct irqaction ar71xx_misc_irqaction = { + .handler = no_action, + .name = "cascade [AR71XX MISC]", +}; + +static void __init ar71xx_misc_irq_init(void) +{ + void __iomem *base = ar71xx_reset_base; + int i; + + __raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_ENABLE); + __raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_STATUS); + + switch (ar71xx_soc) { + case AR71XX_SOC_AR7240: + case AR71XX_SOC_AR7241: + case AR71XX_SOC_AR7242: + case AR71XX_SOC_AR9330: + case AR71XX_SOC_AR9331: + case AR71XX_SOC_AR9341: + case AR71XX_SOC_AR9342: + case AR71XX_SOC_AR9344: + ar71xx_misc_irq_chip.irq_ack = ar724x_misc_irq_ack; + break; + default: + ar71xx_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask; + break; + } + + for (i = AR71XX_MISC_IRQ_BASE; + i < AR71XX_MISC_IRQ_BASE + AR71XX_MISC_IRQ_COUNT; i++) + irq_set_chip_and_handler(i, &ar71xx_misc_irq_chip, + handle_level_irq); + + setup_irq(AR71XX_CPU_IRQ_MISC, &ar71xx_misc_irqaction); +} + +static void ar934x_ip2_irq_dispatch(unsigned int irq, struct irq_desc *desc) +{ + u32 status; + + disable_irq_nosync(irq); + + status = ar71xx_reset_rr(AR934X_RESET_REG_PCIE_WMAC_INT_STATUS); + + if (status & AR934X_PCIE_WMAC_INT_PCIE_ALL) { + ar71xx_ddr_flush(AR934X_DDR_REG_FLUSH_PCIE); + generic_handle_irq(AR934X_IP2_IRQ_PCIE); + } else if (status & AR934X_PCIE_WMAC_INT_WMAC_ALL) { + ar71xx_ddr_flush(AR934X_DDR_REG_FLUSH_WMAC); + generic_handle_irq(AR934X_IP2_IRQ_WMAC); + } else { + spurious_interrupt(); + } + + enable_irq(irq); +} + +static void ar934x_ip2_irq_init(void) +{ + int i; + + for (i = AR934X_IP2_IRQ_BASE; + i < AR934X_IP2_IRQ_BASE + AR934X_IP2_IRQ_COUNT; i++) + irq_set_chip_and_handler(i, &dummy_irq_chip, + handle_level_irq); + + irq_set_chained_handler(AR71XX_CPU_IRQ_IP2, ar934x_ip2_irq_dispatch); +} + + +/* + * The IP2/IP3 lines are tied to a PCI/WMAC/USB device. Drivers for + * these devices typically allocate coherent DMA memory, however the + * DMA controller may still have some unsynchronized data in the FIFO. + * Issue a flush in the handlers to ensure that the driver sees + * the update. + */ +static void ar71xx_ip2_handler(void) +{ + ar71xx_ddr_flush(AR71XX_DDR_REG_FLUSH_PCI); + do_IRQ(AR71XX_CPU_IRQ_IP2); +} + +static void ar724x_ip2_handler(void) +{ + ar71xx_ddr_flush(AR724X_DDR_REG_FLUSH_PCIE); + do_IRQ(AR71XX_CPU_IRQ_IP2); +} + +static void ar913x_ip2_handler(void) +{ + ar71xx_ddr_flush(AR91XX_DDR_REG_FLUSH_WMAC); + do_IRQ(AR71XX_CPU_IRQ_IP2); +} + +static void ar933x_ip2_handler(void) +{ + ar71xx_ddr_flush(AR933X_DDR_REG_FLUSH_WMAC); + do_IRQ(AR71XX_CPU_IRQ_IP2); +} + +static void ar934x_ip2_handler(void) +{ + do_IRQ(AR71XX_CPU_IRQ_IP2); +} + +static void ar71xx_ip3_handler(void) +{ + ar71xx_ddr_flush(AR71XX_DDR_REG_FLUSH_USB); + do_IRQ(AR71XX_CPU_IRQ_USB); +} + +static void ar724x_ip3_handler(void) +{ + ar71xx_ddr_flush(AR724X_DDR_REG_FLUSH_USB); + do_IRQ(AR71XX_CPU_IRQ_USB); +} + +static void ar913x_ip3_handler(void) +{ + ar71xx_ddr_flush(AR91XX_DDR_REG_FLUSH_USB); + do_IRQ(AR71XX_CPU_IRQ_USB); +} + +static void ar933x_ip3_handler(void) +{ + ar71xx_ddr_flush(AR933X_DDR_REG_FLUSH_USB); + do_IRQ(AR71XX_CPU_IRQ_USB); +} + +static void ar934x_ip3_handler(void) +{ + do_IRQ(AR71XX_CPU_IRQ_USB); +} + +static void (*ip2_handler)(void); +static void (*ip3_handler)(void); + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned long pending; + + pending = read_c0_status() & read_c0_cause() & ST0_IM; + + if (pending & STATUSF_IP7) + do_IRQ(AR71XX_CPU_IRQ_TIMER); + + else if (pending & STATUSF_IP2) + ip2_handler(); + + else if (pending & STATUSF_IP4) + do_IRQ(AR71XX_CPU_IRQ_GE0); + + else if (pending & STATUSF_IP5) + do_IRQ(AR71XX_CPU_IRQ_GE1); + + else if (pending & STATUSF_IP3) + ip3_handler(); + + else if (pending & STATUSF_IP6) + ar71xx_misc_irq_dispatch(); + + else + spurious_interrupt(); +} + +void __init arch_init_irq(void) +{ + switch (ar71xx_soc) { + case AR71XX_SOC_AR7130: + case AR71XX_SOC_AR7141: + case AR71XX_SOC_AR7161: + ip2_handler = ar71xx_ip2_handler; + ip3_handler = ar71xx_ip3_handler; + break; + + case AR71XX_SOC_AR7240: + case AR71XX_SOC_AR7241: + case AR71XX_SOC_AR7242: + ip2_handler = ar724x_ip2_handler; + ip3_handler = ar724x_ip3_handler; + break; + + case AR71XX_SOC_AR9130: + case AR71XX_SOC_AR9132: + ip2_handler = ar913x_ip2_handler; + ip3_handler = ar913x_ip3_handler; + break; + + case AR71XX_SOC_AR9330: + case AR71XX_SOC_AR9331: + ip2_handler = ar933x_ip2_handler; + ip3_handler = ar933x_ip3_handler; + break; + + case AR71XX_SOC_AR9341: + case AR71XX_SOC_AR9342: + case AR71XX_SOC_AR9344: + ip2_handler = ar934x_ip2_handler; + ip3_handler = ar934x_ip3_handler; + break; + + default: + BUG(); + } + + mips_cpu_irq_init(); + + ar71xx_misc_irq_init(); + + if (ar71xx_soc == AR71XX_SOC_AR9341 || + ar71xx_soc == AR71XX_SOC_AR9342 || + ar71xx_soc == AR71XX_SOC_AR9344) + ar934x_ip2_irq_init(); + + cp0_perfcount_irq = AR71XX_MISC_IRQ_PERFC; + + ar71xx_gpio_irq_init(); +} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-alfa-ap96.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-alfa-ap96.c new file mode 100644 index 000000000..f22db50a5 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-alfa-ap96.c @@ -0,0 +1,156 @@ +/* + * ALFA Network AP96 board support + * + * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/bitops.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/mmc/host.h> +#include <linux/spi/spi.h> +#include <linux/spi/mmc_spi.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-pb42-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-usb.h" + +#define ALFA_AP96_GPIO_MICROSD_CS 0 +#define ALFA_AP96_GPIO_RTC_CS 1 +#define ALFA_AP96_GPIO_PCIE_RESET 2 +#define ALFA_AP96_GPIO_SIM_DETECT 3 +#define ALFA_AP96_GPIO_MICROSD_CD 4 +#define ALFA_AP96_GPIO_PCIE_W_DISABLE 5 + +#define ALFA_AP96_GPIO_BUTTON_RESET 11 + +#define ALFA_AP96_KEYS_POLL_INTERVAL 20 /* msecs */ +#define ALFA_AP96_KEYS_DEBOUNCE_INTERVAL (3 * ALFA_AP96_KEYS_POLL_INTERVAL) + +static struct gpio_keys_button alfa_ap96_gpio_keys[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = ALFA_AP96_KEYS_DEBOUNCE_INTERVAL, + .gpio = ALFA_AP96_GPIO_BUTTON_RESET, + .active_low = 1, + } +}; + +static int alfa_ap96_mmc_get_cd(struct device *dev) +{ + return !gpio_get_value(ALFA_AP96_GPIO_MICROSD_CD); +} + +static struct mmc_spi_platform_data alfa_ap96_mmc_data = { + .get_cd = alfa_ap96_mmc_get_cd, + .caps = MMC_CAP_NEEDS_POLL, + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, +}; + +static struct spi_board_info alfa_ap96_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "m25p80", + }, { + .bus_num = 0, + .chip_select = 1, + .max_speed_hz = 25000000, + .modalias = "mmc_spi", + .platform_data = &alfa_ap96_mmc_data, + .controller_data = (void *) ALFA_AP96_GPIO_MICROSD_CS, + }, { + .bus_num = 0, + .chip_select = 2, + .max_speed_hz = 6250000, + .modalias = "rtc-pcf2123", + .controller_data = (void *) ALFA_AP96_GPIO_RTC_CS, + }, +}; + +static struct resource alfa_ap96_spi_resources[] = { + [0] = { + .start = AR71XX_SPI_BASE, + .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct ar71xx_spi_platform_data alfa_ap96_spi_data = { + .bus_num = 0, + .num_chipselect = 3, +}; + +static struct platform_device alfa_ap96_spi_device = { + .name = "pb44-spi", + .id = -1, + .resource = alfa_ap96_spi_resources, + .num_resources = ARRAY_SIZE(alfa_ap96_spi_resources), + .dev = { + .platform_data = &alfa_ap96_spi_data, + }, +}; + +static void __init alfa_ap96_gpio_setup(void) +{ + ar71xx_gpio_function_disable(AR71XX_GPIO_FUNC_SPI_CS1_EN | + AR71XX_GPIO_FUNC_SPI_CS2_EN); + + gpio_request(ALFA_AP96_GPIO_MICROSD_CD, "microSD CD"); + gpio_direction_input(ALFA_AP96_GPIO_MICROSD_CD); + gpio_request(ALFA_AP96_GPIO_PCIE_RESET, "PCIe reset"); + gpio_direction_output(ALFA_AP96_GPIO_PCIE_RESET, 1); + gpio_request(ALFA_AP96_GPIO_PCIE_W_DISABLE, "PCIe write disable"); + gpio_direction_output(ALFA_AP96_GPIO_PCIE_W_DISABLE, 1); +} + +#define ALFA_AP96_WAN_PHYMASK BIT(4) +#define ALFA_AP96_LAN_PHYMASK BIT(5) +#define ALFA_AP96_MDIO_PHYMASK (ALFA_AP96_LAN_PHYMASK | ALFA_AP96_WAN_PHYMASK) + +static void __init alfa_ap96_init(void) +{ + alfa_ap96_gpio_setup(); + + ar71xx_add_device_mdio(0, ~ALFA_AP96_MDIO_PHYMASK); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth0_data.phy_mask = ALFA_AP96_WAN_PHYMASK; + ar71xx_eth1_pll_data.pll_1000 = 0x110000; + + ar71xx_add_device_eth(0); + + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1); + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth1_data.phy_mask = ALFA_AP96_LAN_PHYMASK; + ar71xx_eth1_pll_data.pll_1000 = 0x110000; + + ar71xx_add_device_eth(1); + + pb42_pci_init(); + + spi_register_board_info(alfa_ap96_spi_info, + ARRAY_SIZE(alfa_ap96_spi_info)); + platform_device_register(&alfa_ap96_spi_device); + + ar71xx_register_gpio_keys_polled(-1, ALFA_AP96_KEYS_POLL_INTERVAL, + ARRAY_SIZE(alfa_ap96_gpio_keys), + alfa_ap96_gpio_keys); + ar71xx_add_device_usb(); +} + +MIPS_MACHINE(AR71XX_MACH_ALFA_AP96, "ALFA-AP96", "ALFA Network AP96", + alfa_ap96_init); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-alfa-nx.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-alfa-nx.c new file mode 100644 index 000000000..6e28080a8 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-alfa-nx.c @@ -0,0 +1,159 @@ +/* + * ALFA Network N2/N5 board support + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-ap91-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" + +#define ALFA_NX_GPIO_LED_2 17 +#define ALFA_NX_GPIO_LED_3 16 +#define ALFA_NX_GPIO_LED_5 12 +#define ALFA_NX_GPIO_LED_6 8 +#define ALFA_NX_GPIO_LED_7 6 +#define ALFA_NX_GPIO_LED_8 7 + +#define ALFA_NX_GPIO_BTN_RESET 11 + +#define ALFA_NX_KEYS_POLL_INTERVAL 20 /* msecs */ +#define ALFA_NX_KEYS_DEBOUNCE_INTERVAL (3 * ALFA_NX_KEYS_POLL_INTERVAL) + +#define ALFA_NX_MAC0_OFFSET 0 +#define ALFA_NX_MAC1_OFFSET 6 +#define ALFA_NX_CALDATA_OFFSET 0x1000 + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition alfa_nx_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x040000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "rootfs", + .offset = 0x050000, + .size = 0x600000, + }, { + .name = "kernel", + .offset = 0x650000, + .size = 0x190000, + }, { + .name = "nvram", + .offset = 0x7e0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "art", + .offset = 0x7f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x050000, + .size = 0x780000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct flash_platform_data alfa_nx_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .parts = alfa_nx_partitions, + .nr_parts = ARRAY_SIZE(alfa_nx_partitions), +#endif +}; + +static struct gpio_keys_button alfa_nx_gpio_keys[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = ALFA_NX_KEYS_DEBOUNCE_INTERVAL, + .gpio = ALFA_NX_GPIO_BTN_RESET, + .active_low = 1, + } +}; + +static struct gpio_led alfa_nx_leds_gpio[] __initdata = { + { + .name = "alfa:green:led_2", + .gpio = ALFA_NX_GPIO_LED_2, + .active_low = 1, + }, { + .name = "alfa:green:led_3", + .gpio = ALFA_NX_GPIO_LED_3, + .active_low = 1, + }, { + .name = "alfa:red:led_5", + .gpio = ALFA_NX_GPIO_LED_5, + .active_low = 1, + }, { + .name = "alfa:amber:led_6", + .gpio = ALFA_NX_GPIO_LED_6, + .active_low = 1, + }, { + .name = "alfa:green:led_7", + .gpio = ALFA_NX_GPIO_LED_7, + .active_low = 1, + }, { + .name = "alfa:green:led_8", + .gpio = ALFA_NX_GPIO_LED_8, + .active_low = 1, + } +}; + +static void __init alfa_nx_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + ar71xx_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE, + AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); + + ar71xx_add_device_m25p80(&alfa_nx_flash_data); + + ar71xx_add_device_leds_gpio(0, ARRAY_SIZE(alfa_nx_leds_gpio), + alfa_nx_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, ALFA_NX_KEYS_POLL_INTERVAL, + ARRAY_SIZE(alfa_nx_gpio_keys), + alfa_nx_gpio_keys); + + ar71xx_add_device_mdio(0, 0x0); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, + art + ALFA_NX_MAC0_OFFSET, 0); + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, + art + ALFA_NX_MAC1_OFFSET, 0); + + /* WAN port */ + ar71xx_add_device_eth(0); + /* LAN port */ + ar71xx_add_device_eth(1); + + ap91_pci_init(art + ALFA_NX_CALDATA_OFFSET, NULL); +} + +MIPS_MACHINE(AR71XX_MACH_ALFA_NX, "ALFA-NX", "ALFA Network N2/N5", + alfa_nx_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-all0258n.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-all0258n.c new file mode 100644 index 000000000..18d0a93a9 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-all0258n.c @@ -0,0 +1,140 @@ +/* + * Allnet ALL0258N support + * + * Copyright (C) 2011 Daniel Golle <dgolle@allnet.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/platform_device.h> +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-ap91-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" + +/* found via /sys/gpio/... try and error */ +#define ALL0258N_GPIO_BTN_RESET 1 +#define ALL0258N_GPIO_LED_RSSIHIGH 13 +#define ALL0258N_GPIO_LED_RSSIMEDIUM 15 +#define ALL0258N_GPIO_LED_RSSILOW 14 + +/* defaults taken from others machs */ +#define ALL0258N_KEYS_POLL_INTERVAL 20 /* msecs */ +#define ALL0258N_KEYS_DEBOUNCE_INTERVAL (3 * ALL0258N_KEYS_POLL_INTERVAL) + +/* showed up in the original firmware's bootlog */ +#define ALL0258N_SEC_PHYMASK BIT(3) + +/* + * from U-Boot bootargs of original firmware: + * mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),320k(custom),1024k(kernel),4928k(rootfs),1536k(failsafe),64k(ART) + * we use a more OpenWrt-friendly layout now: + * mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),896k(kernel),5376k(rootfs),1536k(failsafe),64k(ART) + */ +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition all0258n_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x040000, + .size = 0x010000, + }, { + .name = "kernel", + .offset = 0x050000, + .size = 0x0E0000, + }, { + .name = "rootfs", + .offset = 0x130000, + .size = 0x540000, + }, { + .name = "failsafe", + .offset = 0x670000, + .size = 0x180000, + }, { + .name = "firmware", + .offset = 0x050000, + .size = 0x620000, + }, { + .name = "art", + .offset = 0x7F0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct flash_platform_data all0258n_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .parts = all0258n_partitions, + .nr_parts = ARRAY_SIZE(all0258n_partitions), +#endif +}; + +static struct gpio_led all0258n_leds_gpio[] __initdata = { + { + .name = "all0258n:green:rssihigh", + .gpio = ALL0258N_GPIO_LED_RSSIHIGH, + .active_low = 1, + }, { + .name = "all0258n:yellow:rssimedium", + .gpio = ALL0258N_GPIO_LED_RSSIMEDIUM, + .active_low = 1, + }, { + .name = "all0258n:red:rssilow", + .gpio = ALL0258N_GPIO_LED_RSSILOW, + .active_low = 1, + } +}; + +static struct gpio_keys_button all0258n_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = ALL0258N_KEYS_DEBOUNCE_INTERVAL, + .gpio = ALL0258N_GPIO_BTN_RESET, + .active_low = 1, + } +}; + +static void __init all0258n_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f7f0000); + u8 *ee = (u8 *) KSEG1ADDR(0x1f7f1000); + + ar71xx_add_device_m25p80(&all0258n_flash_data); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(all0258n_leds_gpio), + all0258n_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, ALL0258N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(all0258n_gpio_keys), + all0258n_gpio_keys); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 0); + + ar71xx_eth1_data.phy_mask = ALL0258N_SEC_PHYMASK; + + ar71xx_add_device_mdio(0, 0x0); + + ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + + ap91_pci_init(ee, mac); +} + +MIPS_MACHINE(AR71XX_MACH_ALL0258N, "ALL0258N", "Allnet ALL0258N", + all0258n_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap121.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap121.c new file mode 100644 index 000000000..d14996f59 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap121.c @@ -0,0 +1,237 @@ +/* + * Atheros AP121 board support + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/spi/flash.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-ar9xxx-wmac.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" + +#define AP121_GPIO_LED_WLAN 0 +#define AP121_GPIO_LED_USB 1 + +#define AP121_GPIO_BTN_JUMPSTART 11 +#define AP121_GPIO_BTN_RESET 12 + +#define AP121_KEYS_POLL_INTERVAL 20 /* msecs */ +#define AP121_KEYS_DEBOUNCE_INTERVAL (3 * AP121_KEYS_POLL_INTERVAL) + +#define AP121_MAC0_OFFSET 0x0000 +#define AP121_MAC1_OFFSET 0x0006 +#define AP121_CALDATA_OFFSET 0x1000 +#define AP121_WMAC_MAC_OFFSET 0x1002 + +#define AP121_MINI_GPIO_LED_WLAN 0 +#define AP121_MINI_GPIO_BTN_JUMPSTART 12 +#define AP121_MINI_GPIO_BTN_RESET 11 + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition ap121_parts[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "rootfs", + .offset = 0x010000, + .size = 0x130000, + }, + { + .name = "uImage", + .offset = 0x140000, + .size = 0x0a0000, + }, + { + .name = "NVRAM", + .offset = 0x1e0000, + .size = 0x010000, + }, + { + .name = "ART", + .offset = 0x1f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, +}; +#define ap121_nr_parts ARRAY_SIZE(ap121_parts) + +static struct mtd_partition ap121_mini_parts[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x040000, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "u-boot-env", + .offset = 0x040000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "rootfs", + .offset = 0x050000, + .size = 0x2b0000, + }, + { + .name = "uImage", + .offset = 0x300000, + .size = 0x0e0000, + }, + { + .name = "NVRAM", + .offset = 0x3e0000, + .size = 0x010000, + }, + { + .name = "ART", + .offset = 0x3f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, +}; + +#define ap121_mini_nr_parts ARRAY_SIZE(ap121_parts) + +#else +#define ap121_parts NULL +#define ap121_nr_parts 0 +#define ap121_mini_parts NULL +#define ap121_mini_nr_parts 0 +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct flash_platform_data ap121_flash_data = { + .parts = ap121_parts, + .nr_parts = ap121_nr_parts, +}; + +static struct gpio_led ap121_leds_gpio[] __initdata = { + { + .name = "ap121:green:usb", + .gpio = AP121_GPIO_LED_USB, + .active_low = 0, + }, + { + .name = "ap121:green:wlan", + .gpio = AP121_GPIO_LED_WLAN, + .active_low = 0, + }, +}; + +static struct gpio_keys_button ap121_gpio_keys[] __initdata = { + { + .desc = "jumpstart button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, + .gpio = AP121_GPIO_BTN_JUMPSTART, + .active_low = 1, + }, + { + .desc = "reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, + .gpio = AP121_GPIO_BTN_RESET, + .active_low = 1, + } +}; + +static struct gpio_led ap121_mini_leds_gpio[] __initdata = { + { + .name = "ap121:green:wlan", + .gpio = AP121_MINI_GPIO_LED_WLAN, + .active_low = 0, + }, +}; + +static struct gpio_keys_button ap121_mini_gpio_keys[] __initdata = { + { + .desc = "jumpstart button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, + .gpio = AP121_MINI_GPIO_BTN_JUMPSTART, + .active_low = 1, + }, + { + .desc = "reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, + .gpio = AP121_MINI_GPIO_BTN_RESET, + .active_low = 1, + } +}; + +static void __init ap121_common_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + ar71xx_add_device_m25p80(&ap121_flash_data); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, art + AP121_MAC0_OFFSET, 0); + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, art + AP121_MAC1_OFFSET, 0); + + ar71xx_add_device_mdio(0, 0x0); + + /* LAN ports */ + ar71xx_add_device_eth(1); + + /* WAN port */ + ar71xx_add_device_eth(0); + + ar9xxx_add_device_wmac(art + AP121_CALDATA_OFFSET, + art + AP121_WMAC_MAC_OFFSET); +} + +static void __init ap121_setup(void) +{ + ap121_flash_data.parts = ap121_parts; + ap121_flash_data.nr_parts = ap121_nr_parts; + + ap121_common_setup(); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio), + ap121_leds_gpio); + ar71xx_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ap121_gpio_keys), + ap121_gpio_keys); + + ar71xx_add_device_usb(); +} + +static void __init ap121_mini_setup(void) +{ + ap121_flash_data.parts = ap121_mini_parts; + ap121_flash_data.nr_parts = ap121_mini_nr_parts; + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap121_mini_leds_gpio), + ap121_mini_leds_gpio); + ar71xx_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ap121_mini_gpio_keys), + ap121_mini_gpio_keys); + + ap121_common_setup(); +} + +MIPS_MACHINE(AR71XX_MACH_AP121, "AP121", "Atheros AP121", + ap121_setup); + +MIPS_MACHINE(AR71XX_MACH_AP121_MINI, "AP121-MINI", "Atheros AP121-MINI", + ap121_mini_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap81.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap81.c new file mode 100644 index 000000000..802dbec0c --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap81.c @@ -0,0 +1,142 @@ +/* + * Atheros AP81 board support + * + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-ar9xxx-wmac.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-usb.h" + +#define AP81_GPIO_LED_STATUS 1 +#define AP81_GPIO_LED_AOSS 3 +#define AP81_GPIO_LED_WLAN 6 +#define AP81_GPIO_LED_POWER 14 + +#define AP81_GPIO_BTN_SW4 12 +#define AP81_GPIO_BTN_SW1 21 + +#define AP81_KEYS_POLL_INTERVAL 20 /* msecs */ +#define AP81_KEYS_DEBOUNCE_INTERVAL (3 * AP81_KEYS_POLL_INTERVAL) + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition ap81_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x040000, + .size = 0x010000, + }, { + .name = "rootfs", + .offset = 0x050000, + .size = 0x500000, + }, { + .name = "uImage", + .offset = 0x550000, + .size = 0x100000, + }, { + .name = "ART", + .offset = 0x650000, + .size = 0x1b0000, + .mask_flags = MTD_WRITEABLE, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct flash_platform_data ap81_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .parts = ap81_partitions, + .nr_parts = ARRAY_SIZE(ap81_partitions), +#endif +}; + +static struct gpio_led ap81_leds_gpio[] __initdata = { + { + .name = "ap81:green:status", + .gpio = AP81_GPIO_LED_STATUS, + .active_low = 1, + }, { + .name = "ap81:amber:aoss", + .gpio = AP81_GPIO_LED_AOSS, + .active_low = 1, + }, { + .name = "ap81:green:wlan", + .gpio = AP81_GPIO_LED_WLAN, + .active_low = 1, + }, { + .name = "ap81:green:power", + .gpio = AP81_GPIO_LED_POWER, + .active_low = 1, + } +}; + +static struct gpio_keys_button ap81_gpio_keys[] __initdata = { + { + .desc = "sw1", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL, + .gpio = AP81_GPIO_BTN_SW1, + .active_low = 1, + }, { + .desc = "sw4", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL, + .gpio = AP81_GPIO_BTN_SW4, + .active_low = 1, + } +}; + +static void __init ap81_setup(void) +{ + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + + ar71xx_add_device_mdio(0, 0x0); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, eeprom, 0); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth0_data.speed = SPEED_100; + ar71xx_eth0_data.duplex = DUPLEX_FULL; + ar71xx_eth0_data.has_ar8216 = 1; + + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, eeprom, 1); + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth1_data.phy_mask = 0x10; + + ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + + ar71xx_add_device_usb(); + + ar71xx_add_device_m25p80(&ap81_flash_data); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap81_leds_gpio), + ap81_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ap81_gpio_keys), + ap81_gpio_keys); + + ar9xxx_add_device_wmac(eeprom, NULL); +} + +MIPS_MACHINE(AR71XX_MACH_AP81, "AP81", "Atheros AP81", ap81_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap83.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap83.c new file mode 100644 index 000000000..2eab99455 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap83.c @@ -0,0 +1,267 @@ +/* + * Atheros AP83 board support + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi_gpio.h> +#include <linux/spi/vsc7385.h> + +#include <asm/mach-ar71xx/ar71xx.h> +#include <asm/mach-ar71xx/ar91xx_flash.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-ar9xxx-wmac.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-usb.h" + +#define AP83_GPIO_LED_WLAN 6 +#define AP83_GPIO_LED_POWER 14 +#define AP83_GPIO_LED_JUMPSTART 15 +#define AP83_GPIO_BTN_JUMPSTART 12 +#define AP83_GPIO_BTN_RESET 21 + +#define AP83_050_GPIO_VSC7385_CS 1 +#define AP83_050_GPIO_VSC7385_MISO 3 +#define AP83_050_GPIO_VSC7385_MOSI 16 +#define AP83_050_GPIO_VSC7385_SCK 17 + +#define AP83_KEYS_POLL_INTERVAL 20 /* msecs */ +#define AP83_KEYS_DEBOUNCE_INTERVAL (3 * AP83_KEYS_POLL_INTERVAL) + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition ap83_flash_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x040000, + .size = 0x020000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = 0x060000, + .size = 0x140000, + }, { + .name = "rootfs", + .offset = 0x1a0000, + .size = 0x650000, + }, { + .name = "art", + .offset = 0x7f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x060000, + .size = 0x790000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct ar91xx_flash_platform_data ap83_flash_data = { + .width = 2, +#ifdef CONFIG_MTD_PARTITIONS + .parts = ap83_flash_partitions, + .nr_parts = ARRAY_SIZE(ap83_flash_partitions), +#endif +}; + +static struct resource ap83_flash_resources[] = { + [0] = { + .start = AR71XX_SPI_BASE, + .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device ap83_flash_device = { + .name = "ar91xx-flash", + .id = -1, + .resource = ap83_flash_resources, + .num_resources = ARRAY_SIZE(ap83_flash_resources), + .dev = { + .platform_data = &ap83_flash_data, + } +}; + +static struct gpio_led ap83_leds_gpio[] __initdata = { + { + .name = "ap83:green:jumpstart", + .gpio = AP83_GPIO_LED_JUMPSTART, + .active_low = 0, + }, { + .name = "ap83:green:power", + .gpio = AP83_GPIO_LED_POWER, + .active_low = 0, + }, { + .name = "ap83:green:wlan", + .gpio = AP83_GPIO_LED_WLAN, + .active_low = 0, + }, +}; + +static struct gpio_keys_button ap83_gpio_keys[] __initdata = { + { + .desc = "soft_reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = AP83_KEYS_DEBOUNCE_INTERVAL, + .gpio = AP83_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "jumpstart", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = AP83_KEYS_DEBOUNCE_INTERVAL, + .gpio = AP83_GPIO_BTN_JUMPSTART, + .active_low = 1, + } +}; + +static struct resource ap83_040_spi_resources[] = { + [0] = { + .start = AR71XX_SPI_BASE, + .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device ap83_040_spi_device = { + .name = "ap83-spi", + .id = 0, + .resource = ap83_040_spi_resources, + .num_resources = ARRAY_SIZE(ap83_040_spi_resources), +}; + +static struct spi_gpio_platform_data ap83_050_spi_data = { + .miso = AP83_050_GPIO_VSC7385_MISO, + .mosi = AP83_050_GPIO_VSC7385_MOSI, + .sck = AP83_050_GPIO_VSC7385_SCK, + .num_chipselect = 1, +}; + +static struct platform_device ap83_050_spi_device = { + .name = "spi_gpio", + .id = 0, + .dev = { + .platform_data = &ap83_050_spi_data, + } +}; + +static void ap83_vsc7385_reset(void) +{ + ar71xx_device_stop(RESET_MODULE_GE1_PHY); + udelay(10); + ar71xx_device_start(RESET_MODULE_GE1_PHY); + mdelay(50); +} + +static struct vsc7385_platform_data ap83_vsc7385_data = { + .reset = ap83_vsc7385_reset, + .ucode_name = "vsc7385_ucode_ap83.bin", + .mac_cfg = { + .tx_ipg = 6, + .bit2 = 0, + .clk_sel = 3, + }, +}; + +static struct spi_board_info ap83_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "spi-vsc7385", + .platform_data = &ap83_vsc7385_data, + .controller_data = (void *) AP83_050_GPIO_VSC7385_CS, + } +}; + +static void __init ap83_generic_setup(void) +{ + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + + ar71xx_add_device_mdio(0, 0xfffffffe); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, eeprom, 0); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth0_data.phy_mask = 0x1; + + ar71xx_add_device_eth(0); + + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, eeprom, 1); + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth1_data.speed = SPEED_1000; + ar71xx_eth1_data.duplex = DUPLEX_FULL; + + ar71xx_eth1_pll_data.pll_1000 = 0x1f000000; + + ar71xx_add_device_eth(1); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap83_leds_gpio), + ap83_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, AP83_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ap83_gpio_keys), + ap83_gpio_keys); + + ar71xx_add_device_usb(); + + ar9xxx_add_device_wmac(eeprom, NULL); + + platform_device_register(&ap83_flash_device); + + spi_register_board_info(ap83_spi_info, ARRAY_SIZE(ap83_spi_info)); +} + +static void __init ap83_040_setup(void) +{ + ap83_flash_data.is_shared = 1; + ap83_generic_setup(); + platform_device_register(&ap83_040_spi_device); +} + +static void __init ap83_050_setup(void) +{ + ap83_generic_setup(); + platform_device_register(&ap83_050_spi_device); +} + +static void __init ap83_setup(void) +{ + u8 *board_id = (u8 *) KSEG1ADDR(0x1fff1244); + unsigned int board_version; + + board_version = (unsigned int)(board_id[0] - '0'); + board_version += ((unsigned int)(board_id[1] - '0')) * 10; + + switch (board_version) { + case 40: + ap83_040_setup(); + break; + case 50: + ap83_050_setup(); + break; + default: + printk(KERN_WARNING "AP83-%03u board is not yet supported\n", + board_version); + } +} + +MIPS_MACHINE(AR71XX_MACH_AP83, "AP83", "Atheros AP83", ap83_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap96.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap96.c new file mode 100644 index 000000000..5882af29f --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap96.c @@ -0,0 +1,180 @@ +/* + * Atheros AP96 board support + * + * Copyright (C) 2009 Marco Porsch + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2010 Atheros Communications + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/delay.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-ap94-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-usb.h" + +#define AP96_GPIO_LED_12_GREEN 0 +#define AP96_GPIO_LED_3_GREEN 1 +#define AP96_GPIO_LED_2_GREEN 2 +#define AP96_GPIO_LED_WPS_GREEN 4 +#define AP96_GPIO_LED_5_GREEN 5 +#define AP96_GPIO_LED_4_ORANGE 6 + +/* Reset button - next to the power connector */ +#define AP96_GPIO_BTN_RESET 3 +/* WPS button - next to a led on right */ +#define AP96_GPIO_BTN_WPS 8 + +#define AP96_KEYS_POLL_INTERVAL 20 /* msecs */ +#define AP96_KEYS_DEBOUNCE_INTERVAL (3 * AP96_KEYS_POLL_INTERVAL) + +#define AP96_WMAC0_MAC_OFFSET 0x120c +#define AP96_WMAC1_MAC_OFFSET 0x520c +#define AP96_CALDATA0_OFFSET 0x1000 +#define AP96_CALDATA1_OFFSET 0x5000 + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition ap96_partitions[] = { + { + .name = "uboot", + .offset = 0, + .size = 0x030000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "env", + .offset = 0x030000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "rootfs", + .offset = 0x040000, + .size = 0x600000, + }, { + .name = "uImage", + .offset = 0x640000, + .size = 0x1b0000, + }, { + .name = "caldata", + .offset = 0x7f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct flash_platform_data ap96_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .parts = ap96_partitions, + .nr_parts = ARRAY_SIZE(ap96_partitions), +#endif +}; + +/* + * AP96 has 12 unlabeled leds in the front; these are numbered from 1 to 12 + * below (from left to right on the board). Led 1 seems to be on whenever the + * board is powered. Led 11 shows LAN link activity actity. Led 3 is orange; + * others are green. + * + * In addition, there is one led next to a button on the right side for WPS. + */ +static struct gpio_led ap96_leds_gpio[] __initdata = { + { + .name = "ap96:green:led2", + .gpio = AP96_GPIO_LED_2_GREEN, + .active_low = 1, + }, { + .name = "ap96:green:led3", + .gpio = AP96_GPIO_LED_3_GREEN, + .active_low = 1, + }, { + .name = "ap96:orange:led4", + .gpio = AP96_GPIO_LED_4_ORANGE, + .active_low = 1, + }, { + .name = "ap96:green:led5", + .gpio = AP96_GPIO_LED_5_GREEN, + .active_low = 1, + }, { + .name = "ap96:green:led12", + .gpio = AP96_GPIO_LED_12_GREEN, + .active_low = 1, + }, { /* next to a button on right */ + .name = "ap96:green:wps", + .gpio = AP96_GPIO_LED_WPS_GREEN, + .active_low = 1, + } +}; + +static struct gpio_keys_button ap96_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = AP96_KEYS_DEBOUNCE_INTERVAL, + .gpio = AP96_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = AP96_KEYS_DEBOUNCE_INTERVAL, + .gpio = AP96_GPIO_BTN_WPS, + .active_low = 1, + } +}; + +#define AP96_WAN_PHYMASK 0x10 +#define AP96_LAN_PHYMASK 0x0f + +static void __init ap96_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + ar71xx_add_device_mdio(0, ~(AP96_WAN_PHYMASK | AP96_LAN_PHYMASK)); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, art, 0); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth0_data.phy_mask = AP96_LAN_PHYMASK; + ar71xx_eth0_data.speed = SPEED_1000; + ar71xx_eth0_data.duplex = DUPLEX_FULL; + + ar71xx_add_device_eth(0); + + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, art, 1); + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth1_data.phy_mask = AP96_WAN_PHYMASK; + + ar71xx_eth1_pll_data.pll_1000 = 0x1f000000; + + ar71xx_add_device_eth(1); + + ar71xx_add_device_usb(); + + ar71xx_add_device_m25p80(&ap96_flash_data); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap96_leds_gpio), + ap96_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, AP96_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ap96_gpio_keys), + ap96_gpio_keys); + + ap94_pci_init(art + AP96_CALDATA0_OFFSET, + art + AP96_WMAC0_MAC_OFFSET, + art + AP96_CALDATA1_OFFSET, + art + AP96_WMAC1_MAC_OFFSET); +} + +MIPS_MACHINE(AR71XX_MACH_AP96, "AP96", "Atheros AP96", ap96_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-aw-nr580.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-aw-nr580.c new file mode 100644 index 000000000..54dc96c71 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-aw-nr580.c @@ -0,0 +1,108 @@ +/* + * AzureWave AW-NR580 board support + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <asm/mips_machine.h> +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-gpio-buttons.h" +#include "dev-pb42-pci.h" +#include "dev-leds-gpio.h" + +#define AW_NR580_GPIO_LED_READY_RED 0 +#define AW_NR580_GPIO_LED_WLAN 1 +#define AW_NR580_GPIO_LED_READY_GREEN 2 +#define AW_NR580_GPIO_LED_WPS_GREEN 4 +#define AW_NR580_GPIO_LED_WPS_AMBER 5 + +#define AW_NR580_GPIO_BTN_WPS 3 +#define AW_NR580_GPIO_BTN_RESET 11 + +#define AW_NR580_KEYS_POLL_INTERVAL 20 /* msecs */ +#define AW_NR580_KEYS_DEBOUNCE_INTERVAL (3 * AW_NR580_KEYS_POLL_INTERVAL) + +static struct gpio_led aw_nr580_leds_gpio[] __initdata = { + { + .name = "aw-nr580:red:ready", + .gpio = AW_NR580_GPIO_LED_READY_RED, + .active_low = 0, + }, { + .name = "aw-nr580:green:ready", + .gpio = AW_NR580_GPIO_LED_READY_GREEN, + .active_low = 0, + }, { + .name = "aw-nr580:green:wps", + .gpio = AW_NR580_GPIO_LED_WPS_GREEN, + .active_low = 0, + }, { + .name = "aw-nr580:amber:wps", + .gpio = AW_NR580_GPIO_LED_WPS_AMBER, + .active_low = 0, + }, { + .name = "aw-nr580:green:wlan", + .gpio = AW_NR580_GPIO_LED_WLAN, + .active_low = 0, + } +}; + +static struct gpio_keys_button aw_nr580_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = AW_NR580_KEYS_DEBOUNCE_INTERVAL, + .gpio = AW_NR580_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = AW_NR580_KEYS_DEBOUNCE_INTERVAL, + .gpio = AW_NR580_GPIO_BTN_WPS, + .active_low = 1, + } +}; + +static const char *aw_nr580_part_probes[] = { + "RedBoot", + NULL, +}; + +static struct flash_platform_data aw_nr580_flash_data = { + .part_probes = aw_nr580_part_probes, +}; + +static void __init aw_nr580_setup(void) +{ + ar71xx_add_device_mdio(0, 0x0); + + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ar71xx_eth0_data.speed = SPEED_100; + ar71xx_eth0_data.duplex = DUPLEX_FULL; + + ar71xx_add_device_eth(0); + + pb42_pci_init(); + + ar71xx_add_device_m25p80(&aw_nr580_flash_data); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(aw_nr580_leds_gpio), + aw_nr580_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, AW_NR580_KEYS_POLL_INTERVAL, + ARRAY_SIZE(aw_nr580_gpio_keys), + aw_nr580_gpio_keys); +} + +MIPS_MACHINE(AR71XX_MACH_AW_NR580, "AW-NR580", "AzureWave AW-NR580", + aw_nr580_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-db120.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-db120.c new file mode 100644 index 000000000..3a95fa26d --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-db120.c @@ -0,0 +1,184 @@ +/* + * Atheros DB120 board (WASP SoC) support + * + * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/platform_device.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-usb.h" +#include "dev-ar9xxx-wmac.h" +#include "dev-db120-pci.h" + +#define DB120_GPIO_LED_USB 11 +#define DB120_GPIO_LED_WLAN_5G 12 +#define DB120_GPIO_LED_WLAN_2G 13 +#define DB120_GPIO_LED_STATUS 14 +#define DB120_GPIO_LED_WPS 15 + +#define DB120_GPIO_BTN_WPS 16 + +#define DB120_MAC0_OFFSET 0 +#define DB120_MAC1_OFFSET 6 +#define DB120_WMAC_CALDATA_OFFSET 0x1000 +#define DB120_PCIE_CALDATA_OFFSET 0x5000 + +#define DB120_KEYS_POLL_INTERVAL 20 /* msecs */ +#define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL) + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition db120_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x040000, + .size = 0x010000, + }, { + .name = "rootfs", + .offset = 0x050000, + .size = 0x630000, + }, { + .name = "uImage", + .offset = 0x680000, + .size = 0x160000, + }, { + .name = "NVRAM", + .offset = 0x7E0000, + .size = 0x010000, + }, { + .name = "ART", + .offset = 0x7F0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct flash_platform_data db120_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .parts = db120_partitions, + .nr_parts = ARRAY_SIZE(db120_partitions), +#endif +}; + +static struct gpio_led db120_leds_gpio[] __initdata = { + { + .name = "db120:green:status", + .gpio = DB120_GPIO_LED_STATUS, + .active_low = 1, + }, { + .name = "db120:green:wps", + .gpio = DB120_GPIO_LED_WPS, + .active_low = 1, + }, { + .name = "db120:green:wlan-5g", + .gpio = DB120_GPIO_LED_WLAN_5G, + .active_low = 1, + }, { + .name = "db120:green:wlan-2g", + .gpio = DB120_GPIO_LED_WLAN_2G, + .active_low = 1, + }, { + .name = "db120:green:usb", + .gpio = DB120_GPIO_LED_USB, + .active_low = 1, + } +}; + +static struct gpio_keys_button db120_gpio_keys[] __initdata = { + { + .desc = "WPS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = DB120_KEYS_DEBOUNCE_INTERVAL, + .gpio = DB120_GPIO_BTN_WPS, + .active_low = 1, + } +}; + +static void __init db120_gmac_setup(void) +{ + void __iomem *base; + u32 t; + + base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE); + + t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG); + t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0 | + AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE); + __raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG); + + iounmap(base); +} + +static void __init db120_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + ar71xx_gpio_output_select(DB120_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO); + + ar71xx_add_device_usb(); + + ar71xx_add_device_m25p80(&db120_flash_data); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio), + db120_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL, + ARRAY_SIZE(db120_gpio_keys), + db120_gpio_keys); + + db120_gmac_setup(); + + ar71xx_add_device_mdio(0, 0x0); + ar71xx_add_device_mdio(1, 0x0); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0); +#if 0 + /* GMAC0 is connected to an AR8327 switch */ + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth0_data.speed = SPEED_1000; + ar71xx_eth0_data.duplex = DUPLEX_FULL; +#else + /* GMAC0 is connected to PHY4 of the internal switch */ + ar71xx_switch_data.phy4_mii_en = 1; + + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ar71xx_eth0_data.phy_mask = BIT(4); + ar71xx_eth0_data.mii_bus_dev = &ar71xx_mdio1_device.dev; +#endif + + ar71xx_add_device_eth(0); + + /* GMAC1 is connected to the internal switch */ + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, art + DB120_MAC1_OFFSET, 0); + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ar71xx_eth1_data.speed = SPEED_1000; + ar71xx_eth1_data.duplex = DUPLEX_FULL; + + ar71xx_add_device_eth(1); + + ar9xxx_add_device_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL); + + db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET, NULL); +} + +MIPS_MACHINE(AR71XX_MACH_DB120, "DB120", "Atheros DB120", db120_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-600-a1.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-600-a1.c new file mode 100644 index 000000000..ba833e8f7 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-600-a1.c @@ -0,0 +1,151 @@ +/* + * D-Link DIR-600 rev. A1 board support + * + * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-ap91-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "nvram.h" + +#define DIR_600_A1_GPIO_LED_WPS 0 +#define DIR_600_A1_GPIO_LED_POWER_AMBER 1 +#define DIR_600_A1_GPIO_LED_POWER_GREEN 6 + +#define DIR_600_A1_GPIO_BTN_RESET 8 +#define DIR_600_A1_GPIO_BTN_WPS 12 + +#define DIR_600_A1_KEYS_POLL_INTERVAL 20 /* msecs */ +#define DIR_600_A1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_600_A1_KEYS_POLL_INTERVAL) + +#define DIR_600_A1_NVRAM_ADDR 0x1f030000 +#define DIR_600_A1_NVRAM_SIZE 0x10000 + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition dir_600_a1_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x030000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "nvram", + .offset = 0x030000, + .size = 0x010000, + }, { + .name = "kernel", + .offset = 0x040000, + .size = 0x0e0000, + }, { + .name = "rootfs", + .offset = 0x120000, + .size = 0x2c0000, + }, { + .name = "mac", + .offset = 0x3e0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "art", + .offset = 0x3f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x040000, + .size = 0x3a0000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct flash_platform_data dir_600_a1_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .parts = dir_600_a1_partitions, + .nr_parts = ARRAY_SIZE(dir_600_a1_partitions), +#endif +}; + +static struct gpio_led dir_600_a1_leds_gpio[] __initdata = { + { + .name = "dir-600-a1:green:power", + .gpio = DIR_600_A1_GPIO_LED_POWER_GREEN, + }, { + .name = "dir-600-a1:amber:power", + .gpio = DIR_600_A1_GPIO_LED_POWER_AMBER, + }, { + .name = "dir-600-a1:blue:wps", + .gpio = DIR_600_A1_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button dir_600_a1_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = DIR_600_A1_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_600_A1_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = DIR_600_A1_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_600_A1_GPIO_BTN_WPS, + .active_low = 1, + } +}; + +static void __init dir_600_a1_setup(void) +{ + const char *nvram = (char *) KSEG1ADDR(DIR_600_A1_NVRAM_ADDR); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + u8 mac_buff[6]; + u8 *mac = NULL; + + if (nvram_parse_mac_addr(nvram, DIR_600_A1_NVRAM_SIZE, + "lan_mac=", mac_buff) == 0) { + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac_buff, 0); + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac_buff, 1); + mac = mac_buff; + } + + ar71xx_add_device_m25p80(&dir_600_a1_flash_data); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_600_a1_leds_gpio), + dir_600_a1_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, DIR_600_A1_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dir_600_a1_gpio_keys), + dir_600_a1_gpio_keys); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); + + ar71xx_add_device_mdio(0, 0x0); + + /* LAN ports */ + ar71xx_add_device_eth(1); + + /* WAN port */ + ar71xx_add_device_eth(0); + + ap91_pci_init(ee, mac); +} + +MIPS_MACHINE(AR71XX_MACH_DIR_600_A1, "DIR-600-A1", "D-Link DIR-600 rev. A1", + dir_600_a1_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-615-c1.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-615-c1.c new file mode 100644 index 000000000..fcadc6f06 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-615-c1.c @@ -0,0 +1,175 @@ +/* + * D-Link DIR-615 rev C1 board support + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-ar9xxx-wmac.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "nvram.h" + +#define DIR_615C1_GPIO_LED_ORANGE_STATUS 1 /* ORANGE:STATUS:TRICOLOR */ +#define DIR_615C1_GPIO_LED_BLUE_WPS 3 /* BLUE:WPS */ +#define DIR_615C1_GPIO_LED_GREEN_WAN 4 /* GREEN:WAN:TRICOLOR */ +#define DIR_615C1_GPIO_LED_GREEN_WANCPU 5 /* GREEN:WAN:CPU:TRICOLOR */ +#define DIR_615C1_GPIO_LED_GREEN_WLAN 6 /* GREEN:WLAN */ +#define DIR_615C1_GPIO_LED_GREEN_STATUS 14 /* GREEN:STATUS:TRICOLOR */ +#define DIR_615C1_GPIO_LED_ORANGE_WAN 15 /* ORANGE:WAN:TRICOLOR */ + +/* buttons may need refinement */ + +#define DIR_615C1_GPIO_BTN_WPS 12 +#define DIR_615C1_GPIO_BTN_RESET 21 + +#define DIR_615C1_KEYS_POLL_INTERVAL 20 /* msecs */ +#define DIR_615C1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615C1_KEYS_POLL_INTERVAL) + +#define DIR_615C1_CONFIG_ADDR 0x1f020000 +#define DIR_615C1_CONFIG_SIZE 0x10000 + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition dir_615c1_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x020000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "config", + .offset = 0x020000, + .size = 0x010000, + }, { + .name = "kernel", + .offset = 0x030000, + .size = 0x0e0000, + }, { + .name = "rootfs", + .offset = 0x110000, + .size = 0x2e0000, + }, { + .name = "art", + .offset = 0x3f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x030000, + .size = 0x3c0000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct flash_platform_data dir_615c1_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .parts = dir_615c1_partitions, + .nr_parts = ARRAY_SIZE(dir_615c1_partitions), +#endif +}; + +static struct gpio_led dir_615c1_leds_gpio[] __initdata = { + { + .name = "dir-615c1:orange:status", + .gpio = DIR_615C1_GPIO_LED_ORANGE_STATUS, + .active_low = 1, + }, { + .name = "dir-615c1:blue:wps", + .gpio = DIR_615C1_GPIO_LED_BLUE_WPS, + .active_low = 1, + }, { + .name = "dir-615c1:green:wan", + .gpio = DIR_615C1_GPIO_LED_GREEN_WAN, + .active_low = 1, + }, { + .name = "dir-615c1:green:wancpu", + .gpio = DIR_615C1_GPIO_LED_GREEN_WANCPU, + .active_low = 1, + }, { + .name = "dir-615c1:green:wlan", + .gpio = DIR_615C1_GPIO_LED_GREEN_WLAN, + .active_low = 1, + }, { + .name = "dir-615c1:green:status", + .gpio = DIR_615C1_GPIO_LED_GREEN_STATUS, + .active_low = 1, + }, { + .name = "dir-615c1:orange:wan", + .gpio = DIR_615C1_GPIO_LED_ORANGE_WAN, + .active_low = 1, + } + +}; + +static struct gpio_keys_button dir_615c1_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = DIR_615C1_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_615C1_GPIO_BTN_RESET, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = DIR_615C1_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_615C1_GPIO_BTN_WPS, + } +}; + +#define DIR_615C1_LAN_PHYMASK BIT(0) +#define DIR_615C1_WAN_PHYMASK BIT(4) +#define DIR_615C1_MDIO_MASK (~(DIR_615C1_LAN_PHYMASK | \ + DIR_615C1_WAN_PHYMASK)) + +static void __init dir_615c1_setup(void) +{ + const char *config = (char *) KSEG1ADDR(DIR_615C1_CONFIG_ADDR); + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + u8 mac[6]; + u8 *wlan_mac = NULL; + + if (nvram_parse_mac_addr(config, DIR_615C1_CONFIG_SIZE, + "lan_mac=", mac) == 0) { + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); + wlan_mac = mac; + } + + ar71xx_add_device_mdio(0, DIR_615C1_MDIO_MASK); + + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth0_data.phy_mask = DIR_615C1_LAN_PHYMASK; + + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth1_data.phy_mask = DIR_615C1_WAN_PHYMASK; + + ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + + ar71xx_add_device_m25p80(&dir_615c1_flash_data); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_615c1_leds_gpio), + dir_615c1_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, DIR_615C1_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dir_615c1_gpio_keys), + dir_615c1_gpio_keys); + + ar9xxx_add_device_wmac(eeprom, wlan_mac); +} + +MIPS_MACHINE(AR71XX_MACH_DIR_615_C1, "DIR-615-C1", "D-Link DIR-615 rev. C1", + dir_615c1_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-825-b1.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-825-b1.c new file mode 100644 index 000000000..fe672ff46 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-825-b1.c @@ -0,0 +1,211 @@ +/* + * D-Link DIR-825 rev. B1 board support + * + * Copyright (C) 2009-2011 Lukas Kuna, Evkanet, s.r.o. + * + * based on mach-wndr3700.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/delay.h> +#include <linux/rtl8366.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-ap94-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-usb.h" + +#define DIR825B1_GPIO_LED_BLUE_USB 0 +#define DIR825B1_GPIO_LED_ORANGE_POWER 1 +#define DIR825B1_GPIO_LED_BLUE_POWER 2 +#define DIR825B1_GPIO_LED_BLUE_WPS 4 +#define DIR825B1_GPIO_LED_ORANGE_PLANET 6 +#define DIR825B1_GPIO_LED_BLUE_PLANET 11 + +#define DIR825B1_GPIO_BTN_RESET 3 +#define DIR825B1_GPIO_BTN_WPS 8 + +#define DIR825B1_GPIO_RTL8366_SDA 5 +#define DIR825B1_GPIO_RTL8366_SCK 7 + +#define DIR825B1_KEYS_POLL_INTERVAL 20 /* msecs */ +#define DIR825B1_KEYS_DEBOUNCE_INTERVAL (3 * DIR825B1_KEYS_POLL_INTERVAL) + +#define DIR825B1_CAL_LOCATION_0 0x1f661000 +#define DIR825B1_CAL_LOCATION_1 0x1f665000 + +#define DIR825B1_MAC_LOCATION_0 0x1f66ffa0 +#define DIR825B1_MAC_LOCATION_1 0x1f66ffb4 + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition dir825b1_partitions[] = { + { + .name = "uboot", + .offset = 0, + .size = 0x040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "config", + .offset = 0x040000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x050000, + .size = 0x610000, + }, { + .name = "caldata", + .offset = 0x660000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "unknown", + .offset = 0x670000, + .size = 0x190000, + .mask_flags = MTD_WRITEABLE, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct flash_platform_data dir825b1_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .parts = dir825b1_partitions, + .nr_parts = ARRAY_SIZE(dir825b1_partitions), +#endif +}; + +static struct gpio_led dir825b1_leds_gpio[] __initdata = { + { + .name = "dir825b1:blue:usb", + .gpio = DIR825B1_GPIO_LED_BLUE_USB, + .active_low = 1, + }, { + .name = "dir825b1:orange:power", + .gpio = DIR825B1_GPIO_LED_ORANGE_POWER, + .active_low = 1, + }, { + .name = "dir825b1:blue:power", + .gpio = DIR825B1_GPIO_LED_BLUE_POWER, + .active_low = 1, + }, { + .name = "dir825b1:blue:wps", + .gpio = DIR825B1_GPIO_LED_BLUE_WPS, + .active_low = 1, + }, { + .name = "dir825b1:orange:planet", + .gpio = DIR825B1_GPIO_LED_ORANGE_PLANET, + .active_low = 1, + }, { + .name = "dir825b1:blue:planet", + .gpio = DIR825B1_GPIO_LED_BLUE_PLANET, + .active_low = 1, + } +}; + +static struct gpio_keys_button dir825b1_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR825B1_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR825B1_GPIO_BTN_WPS, + .active_low = 1, + } +}; + +static struct rtl8366_initval dir825b1_rtl8366s_initvals[] = { + { .reg = 0x06, .val = 0x0108 }, +}; + +static struct rtl8366_platform_data dir825b1_rtl8366s_data = { + .gpio_sda = DIR825B1_GPIO_RTL8366_SDA, + .gpio_sck = DIR825B1_GPIO_RTL8366_SCK, + .num_initvals = ARRAY_SIZE(dir825b1_rtl8366s_initvals), + .initvals = dir825b1_rtl8366s_initvals, +}; + +static struct platform_device dir825b1_rtl8366s_device = { + .name = RTL8366S_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &dir825b1_rtl8366s_data, + } +}; + +static void dir825b1_read_ascii_mac(u8 *dest, unsigned int src_addr) +{ + int ret; + u8 *src = (u8 *)KSEG1ADDR(src_addr); + + ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", + &dest[0], &dest[1], &dest[2], + &dest[3], &dest[4], &dest[5]); + + if (ret != ETH_ALEN) memset(dest, 0, ETH_ALEN); +} + +static void __init dir825b1_setup(void) +{ + u8 mac1[ETH_ALEN], mac2[ETH_ALEN]; + + dir825b1_read_ascii_mac(mac1, DIR825B1_MAC_LOCATION_0); + dir825b1_read_ascii_mac(mac2, DIR825B1_MAC_LOCATION_1); + + ar71xx_add_device_mdio(0, 0x0); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac1, 2); + ar71xx_eth0_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev; + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth0_data.speed = SPEED_1000; + ar71xx_eth0_data.duplex = DUPLEX_FULL; + ar71xx_eth0_pll_data.pll_1000 = 0x11110000; + + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac1, 3); + ar71xx_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev; + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth1_data.phy_mask = 0x10; + ar71xx_eth1_pll_data.pll_1000 = 0x11110000; + + ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + + ar71xx_add_device_m25p80(&dir825b1_flash_data); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio), + dir825b1_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, DIR825B1_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dir825b1_gpio_keys), + dir825b1_gpio_keys); + + ar71xx_add_device_usb(); + + platform_device_register(&dir825b1_rtl8366s_device); + + ap94_pci_setup_wmac_led_pin(0, 5); + ap94_pci_setup_wmac_led_pin(1, 5); + + ap94_pci_init((u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0), mac1, + (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_1), mac2); +} + +MIPS_MACHINE(AR71XX_MACH_DIR_825_B1, "DIR-825-B1", "D-Link DIR-825 rev. B1", + dir825b1_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-eap7660d.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-eap7660d.c new file mode 100644 index 000000000..d1e49eef0 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-eap7660d.c @@ -0,0 +1,189 @@ +/* + * Senao EAP7660D board support + * + * Copyright (C) 2010 Daniel Golle <daniel.golle@gmail.com> + * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/pci.h> +#include <linux/ath5k_platform.h> +#include <linux/delay.h> +#include <asm/mach-ar71xx/ar71xx.h> +#include <asm/mach-ar71xx/pci.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" + +#define EAP7660D_KEYS_POLL_INTERVAL 20 /* msecs */ +#define EAP7660D_KEYS_DEBOUNCE_INTERVAL (3 * EAP7660D_KEYS_POLL_INTERVAL) + +#define EAP7660D_GPIO_DS4 7 +#define EAP7660D_GPIO_DS5 2 +#define EAP7660D_GPIO_DS7 0 +#define EAP7660D_GPIO_DS8 4 +#define EAP7660D_GPIO_SW1 3 +#define EAP7660D_GPIO_SW3 8 +#define EAP7660D_PHYMASK BIT(20) +#define EAP7660D_BOARDCONFIG 0x1F7F0000 +#define EAP7660D_GBIC_MAC_OFFSET 0x1000 +#define EAP7660D_WMAC0_MAC_OFFSET 0x1010 +#define EAP7660D_WMAC1_MAC_OFFSET 0x1016 +#define EAP7660D_WMAC0_CALDATA_OFFSET 0x2000 +#define EAP7660D_WMAC1_CALDATA_OFFSET 0x3000 + +static struct ath5k_platform_data eap7660d_wmac0_data; +static struct ath5k_platform_data eap7660d_wmac1_data; +static char eap7660d_wmac0_mac[6]; +static char eap7660d_wmac1_mac[6]; +static u16 eap7660d_wmac0_eeprom[ATH5K_PLAT_EEP_MAX_WORDS]; +static u16 eap7660d_wmac1_eeprom[ATH5K_PLAT_EEP_MAX_WORDS]; + +#ifdef CONFIG_PCI +static struct ar71xx_pci_irq eap7660d_pci_irqs[] __initdata = { + { + .slot = 0, + .pin = 1, + .irq = AR71XX_PCI_IRQ_DEV0, + }, { + .slot = 1, + .pin = 1, + .irq = AR71XX_PCI_IRQ_DEV1, + } +}; + +static int eap7660d_pci_plat_dev_init(struct pci_dev *dev) +{ + switch (PCI_SLOT(dev->devfn)) { + case 17: + dev->dev.platform_data = &eap7660d_wmac0_data; + break; + + case 18: + dev->dev.platform_data = &eap7660d_wmac1_data; + break; + } + + return 0; +} + +void __init eap7660d_pci_init(u8 *cal_data0, u8 *mac_addr0, + u8 *cal_data1, u8 *mac_addr1) +{ + if (cal_data0 && *cal_data0 == 0xa55a) { + memcpy(eap7660d_wmac0_eeprom, cal_data0, + ATH5K_PLAT_EEP_MAX_WORDS); + eap7660d_wmac0_data.eeprom_data = eap7660d_wmac0_eeprom; + } + + if (cal_data1 && *cal_data1 == 0xa55a) { + memcpy(eap7660d_wmac1_eeprom, cal_data1, + ATH5K_PLAT_EEP_MAX_WORDS); + eap7660d_wmac1_data.eeprom_data = eap7660d_wmac1_eeprom; + } + + if (mac_addr0) { + memcpy(eap7660d_wmac0_mac, mac_addr0, + sizeof(eap7660d_wmac0_mac)); + eap7660d_wmac0_data.macaddr = eap7660d_wmac0_mac; + } + + if (mac_addr1) { + memcpy(eap7660d_wmac1_mac, mac_addr1, + sizeof(eap7660d_wmac1_mac)); + eap7660d_wmac1_data.macaddr = eap7660d_wmac1_mac; + } + + ar71xx_pci_plat_dev_init = eap7660d_pci_plat_dev_init; + ar71xx_pci_init(ARRAY_SIZE(eap7660d_pci_irqs), eap7660d_pci_irqs); +} +#else +static inline void eap7660d_pci_init(u8 *cal_data0, u8 *mac_addr0, + u8 *cal_data1, u8 *mac_addr1) +{ +} +#endif /* CONFIG_PCI */ + +static struct gpio_led eap7660d_leds_gpio[] __initdata = { + { + .name = "eap7660d:green:ds8", + .gpio = EAP7660D_GPIO_DS8, + .active_low = 0, + }, + { + .name = "eap7660d:green:ds5", + .gpio = EAP7660D_GPIO_DS5, + .active_low = 0, + }, + { + .name = "eap7660d:green:ds7", + .gpio = EAP7660D_GPIO_DS7, + .active_low = 0, + }, + { + .name = "eap7660d:green:ds4", + .gpio = EAP7660D_GPIO_DS4, + .active_low = 0, + } +}; + +static struct gpio_keys_button eap7660d_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = EAP7660D_KEYS_DEBOUNCE_INTERVAL, + .gpio = EAP7660D_GPIO_SW1, + .active_low = 1, + }, + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = EAP7660D_KEYS_DEBOUNCE_INTERVAL, + .gpio = EAP7660D_GPIO_SW3, + .active_low = 1, + } +}; + +static const char *eap7660d_part_probes[] = { + "RedBoot", + NULL, +}; + +static struct flash_platform_data eap7660d_flash_data = { + .part_probes = eap7660d_part_probes, +}; + +static void __init eap7660d_setup(void) +{ + u8 *boardconfig = (u8 *) KSEG1ADDR(EAP7660D_BOARDCONFIG); + + ar71xx_add_device_mdio(0, ~EAP7660D_PHYMASK); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, + boardconfig + EAP7660D_GBIC_MAC_OFFSET, 0); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth0_data.phy_mask = EAP7660D_PHYMASK; + ar71xx_add_device_eth(0); + ar71xx_add_device_m25p80(&eap7660d_flash_data); + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(eap7660d_leds_gpio), + eap7660d_leds_gpio); + ar71xx_register_gpio_keys_polled(-1, EAP7660D_KEYS_POLL_INTERVAL, + ARRAY_SIZE(eap7660d_gpio_keys), + eap7660d_gpio_keys); + eap7660d_pci_init(boardconfig + EAP7660D_WMAC0_CALDATA_OFFSET, + boardconfig + EAP7660D_WMAC0_MAC_OFFSET, + boardconfig + EAP7660D_WMAC1_CALDATA_OFFSET, + boardconfig + EAP7660D_WMAC1_MAC_OFFSET); +}; + +MIPS_MACHINE(AR71XX_MACH_EAP7660D, "EAP7660D", "Senao EAP7660D", + eap7660d_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-hornet-ub.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-hornet-ub.c new file mode 100644 index 000000000..6173d223d --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-hornet-ub.c @@ -0,0 +1,134 @@ +/* + * ALFA NETWORKS Hornet-UB board support + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/gpio.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-ar9xxx-wmac.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" + +#define HORNET_UB_GPIO_LED_WLAN 0 +#define HORNET_UB_GPIO_LED_USB 1 +#define HORNET_UB_GPIO_LED_LAN 13 +#define HORNET_UB_GPIO_LED_WAN 17 +#define HORNET_UB_GPIO_LED_WPS 27 + +#define HORNET_UB_GPIO_BTN_RESET 11 +#define HORNET_UB_GPIO_BTN_WPS 12 + +#define HORNET_UB_GPIO_USB_POWER 26 + +#define HORNET_UB_KEYS_POLL_INTERVAL 20 /* msecs */ +#define HORNET_UB_KEYS_DEBOUNCE_INTERVAL (3 * HORNET_UB_KEYS_POLL_INTERVAL) + +#define HORNET_UB_MAC0_OFFSET 0x0000 +#define HORNET_UB_MAC1_OFFSET 0x0006 +#define HORNET_UB_CALDATA_OFFSET 0x1000 + +static struct gpio_led hornet_ub_leds_gpio[] __initdata = { + { + .name = "alfa:blue:lan", + .gpio = HORNET_UB_GPIO_LED_LAN, + .active_low = 0, + }, + { + .name = "alfa:blue:usb", + .gpio = HORNET_UB_GPIO_LED_USB, + .active_low = 0, + }, + { + .name = "alfa:blue:wan", + .gpio = HORNET_UB_GPIO_LED_WAN, + .active_low = 1, + }, + { + .name = "alfa:blue:wlan", + .gpio = HORNET_UB_GPIO_LED_WLAN, + .active_low = 0, + }, + { + .name = "alfa:blue:wps", + .gpio = HORNET_UB_GPIO_LED_WPS, + .active_low = 1, + }, +}; + +static struct gpio_keys_button hornet_ub_gpio_keys[] __initdata = { + { + .desc = "WPS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = HORNET_UB_KEYS_DEBOUNCE_INTERVAL, + .gpio = HORNET_UB_GPIO_BTN_WPS, + .active_low = 1, + }, + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = HORNET_UB_KEYS_DEBOUNCE_INTERVAL, + .gpio = HORNET_UB_GPIO_BTN_RESET, + .active_low = 0, + } +}; + +static void __init hornet_ub_gpio_setup(void) +{ + u32 t; + + ar71xx_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN); + + t = ar71xx_reset_rr(AR933X_RESET_REG_BOOTSTRAP); + t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN; + ar71xx_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t); + + gpio_request(HORNET_UB_GPIO_USB_POWER, "USB power"); + gpio_direction_output(HORNET_UB_GPIO_USB_POWER, 1); +} + +static void __init hornet_ub_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + hornet_ub_gpio_setup(); + + ar71xx_add_device_m25p80(NULL); + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(hornet_ub_leds_gpio), + hornet_ub_leds_gpio); + ar71xx_register_gpio_keys_polled(-1, HORNET_UB_KEYS_POLL_INTERVAL, + ARRAY_SIZE(hornet_ub_gpio_keys), + hornet_ub_gpio_keys); + + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, + art + HORNET_UB_MAC0_OFFSET, 0); + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, + art + HORNET_UB_MAC1_OFFSET, 0); + + ar71xx_add_device_mdio(0, 0x0); + + ar71xx_add_device_eth(1); + ar71xx_add_device_eth(0); + + ar9xxx_add_device_wmac(art + HORNET_UB_CALDATA_OFFSET, NULL); + ar71xx_add_device_usb(); +} + +MIPS_MACHINE(AR71XX_MACH_HORNET_UB, "HORNET-UB", "ALFA NETWORKS Hornet-UB", + hornet_ub_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ja76pf.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ja76pf.c new file mode 100644 index 000000000..9f56c3fa7 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ja76pf.c @@ -0,0 +1,113 @@ +/* + * jjPlus JA76PF board support + */ + +#include <asm/mach-ar71xx/ar71xx.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-gpio-buttons.h" +#include "dev-pb42-pci.h" +#include "dev-usb.h" +#include "dev-leds-gpio.h" + +#define JA76PF_KEYS_POLL_INTERVAL 20 /* msecs */ +#define JA76PF_KEYS_DEBOUNCE_INTERVAL (3 * JA76PF_KEYS_POLL_INTERVAL) + +#define JA76PF_GPIO_I2C_SCL 0 +#define JA76PF_GPIO_I2C_SDA 1 +#define JA76PF_GPIO_LED_1 5 +#define JA76PF_GPIO_LED_2 4 +#define JA76PF_GPIO_LED_3 3 +#define JA76PF_GPIO_BTN_RESET 11 + +static struct gpio_led ja76pf_leds_gpio[] __initdata = { + { + .name = "ja76pf:green:led1", + .gpio = JA76PF_GPIO_LED_1, + .active_low = 1, + }, { + .name = "ja76pf:green:led2", + .gpio = JA76PF_GPIO_LED_2, + .active_low = 1, + }, { + .name = "ja76pf:green:led3", + .gpio = JA76PF_GPIO_LED_3, + .active_low = 1, + } +}; + +static struct gpio_keys_button ja76pf_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = JA76PF_KEYS_DEBOUNCE_INTERVAL, + .gpio = JA76PF_GPIO_BTN_RESET, + .active_low = 1, + } +}; + +static struct i2c_gpio_platform_data ja76pf_i2c_gpio_data = { + .sda_pin = JA76PF_GPIO_I2C_SDA, + .scl_pin = JA76PF_GPIO_I2C_SCL, +}; + +static struct platform_device ja76pf_i2c_gpio_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &ja76pf_i2c_gpio_data, + } +}; + +static const char *ja76pf_part_probes[] = { + "RedBoot", + NULL, +}; + +static struct flash_platform_data ja76pf_flash_data = { + .part_probes = ja76pf_part_probes, +}; + +#define JA76PF_WAN_PHYMASK (1 << 4) +#define JA76PF_LAN_PHYMASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 < 3)) +#define JA76PF_MDIO_PHYMASK (JA76PF_LAN_PHYMASK | JA76PF_WAN_PHYMASK) + +static void __init ja76pf_init(void) +{ + ar71xx_add_device_m25p80(&ja76pf_flash_data); + + ar71xx_add_device_mdio(0, ~JA76PF_MDIO_PHYMASK); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth0_data.phy_mask = JA76PF_LAN_PHYMASK; + + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1); + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth1_data.phy_mask = JA76PF_WAN_PHYMASK; + ar71xx_eth1_data.speed = SPEED_1000; + ar71xx_eth1_data.duplex = DUPLEX_FULL; + + ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + + platform_device_register(&ja76pf_i2c_gpio_device); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ja76pf_leds_gpio), + ja76pf_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, JA76PF_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ja76pf_gpio_keys), + ja76pf_gpio_keys); + + ar71xx_add_device_usb(); + pb42_pci_init(); +} + +MIPS_MACHINE(AR71XX_MACH_JA76PF, "JA76PF", "jjPlus JA76PF", ja76pf_init); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-jwap003.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-jwap003.c new file mode 100644 index 000000000..3af42041f --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-jwap003.c @@ -0,0 +1,94 @@ +/* + * jjPlus JWAP003 board support + * + */ + +#include <asm/mach-ar71xx/ar71xx.h> +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> +#include <linux/platform_device.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-gpio-buttons.h" +#include "dev-pb42-pci.h" +#include "dev-usb.h" + +#define JWAP003_KEYS_POLL_INTERVAL 20 /* msecs */ +#define JWAP003_KEYS_DEBOUNCE_INTERVAL (3 * JWAP003_KEYS_POLL_INTERVAL) + +#define JWAP003_GPIO_WPS 11 +#define JWAP003_GPIO_I2C_SCL 0 +#define JWAP003_GPIO_I2C_SDA 1 + +static struct gpio_keys_button jwap003_gpio_keys[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = JWAP003_KEYS_DEBOUNCE_INTERVAL, + .gpio = JWAP003_GPIO_WPS, + .active_low = 1, + } +}; + +static struct i2c_gpio_platform_data jwap003_i2c_gpio_data = { + .sda_pin = JWAP003_GPIO_I2C_SDA, + .scl_pin = JWAP003_GPIO_I2C_SCL, +}; + +static struct platform_device jwap003_i2c_gpio_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &jwap003_i2c_gpio_data, + } +}; + +static const char *jwap003_part_probes[] = { + "RedBoot", + NULL, +}; + +static struct flash_platform_data jwap003_flash_data = { + .part_probes = jwap003_part_probes, +}; + +#define JWAP003_WAN_PHYMASK BIT(0) +#define JWAP003_LAN_PHYMASK BIT(4) + +static void __init jwap003_init(void) +{ + ar71xx_add_device_m25p80(&jwap003_flash_data); + + ar71xx_add_device_mdio(0, 0x0); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth0_data.phy_mask = JWAP003_WAN_PHYMASK; + ar71xx_eth0_data.speed = SPEED_100; + ar71xx_eth0_data.duplex = DUPLEX_FULL; + ar71xx_eth0_data.has_ar8216 = 1; + + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1); + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth1_data.phy_mask = JWAP003_LAN_PHYMASK; + ar71xx_eth1_data.speed = SPEED_100; + ar71xx_eth1_data.duplex = DUPLEX_FULL; + + ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + + platform_device_register(&jwap003_i2c_gpio_device); + + ar71xx_add_device_usb(); + + ar71xx_register_gpio_keys_polled(-1, JWAP003_KEYS_POLL_INTERVAL, + ARRAY_SIZE(jwap003_gpio_keys), + jwap003_gpio_keys); + + pb42_pci_init(); +} + +MIPS_MACHINE(AR71XX_MACH_JWAP003, "JWAP003", "jjPlus JWAP003", jwap003_init); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-mzk-w04nu.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-mzk-w04nu.c new file mode 100644 index 000000000..dbb408cbb --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-mzk-w04nu.c @@ -0,0 +1,166 @@ +/* + * Planex MZK-W04NU board support + * + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-ar9xxx-wmac.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" + +#define MZK_W04NU_GPIO_LED_USB 0 +#define MZK_W04NU_GPIO_LED_STATUS 1 +#define MZK_W04NU_GPIO_LED_WPS 3 +#define MZK_W04NU_GPIO_LED_WLAN 6 +#define MZK_W04NU_GPIO_LED_AP 15 +#define MZK_W04NU_GPIO_LED_ROUTER 16 + +#define MZK_W04NU_GPIO_BTN_APROUTER 5 +#define MZK_W04NU_GPIO_BTN_WPS 12 +#define MZK_W04NU_GPIO_BTN_RESET 21 + +#define MZK_W04NU_KEYS_POLL_INTERVAL 20 /* msecs */ +#define MZK_W04NU_KEYS_DEBOUNCE_INTERVAL (3 * MZK_W04NU_KEYS_POLL_INTERVAL) + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition mzk_w04nu_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x040000, + .size = 0x010000, + }, { + .name = "kernel", + .offset = 0x050000, + .size = 0x160000, + }, { + .name = "rootfs", + .offset = 0x1b0000, + .size = 0x630000, + }, { + .name = "art", + .offset = 0x7e0000, + .size = 0x020000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x050000, + .size = 0x790000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct flash_platform_data mzk_w04nu_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .parts = mzk_w04nu_partitions, + .nr_parts = ARRAY_SIZE(mzk_w04nu_partitions), +#endif +}; + +static struct gpio_led mzk_w04nu_leds_gpio[] __initdata = { + { + .name = "planex:green:status", + .gpio = MZK_W04NU_GPIO_LED_STATUS, + .active_low = 1, + }, { + .name = "planex:blue:wps", + .gpio = MZK_W04NU_GPIO_LED_WPS, + .active_low = 1, + }, { + .name = "planex:green:wlan", + .gpio = MZK_W04NU_GPIO_LED_WLAN, + .active_low = 1, + }, { + .name = "planex:green:usb", + .gpio = MZK_W04NU_GPIO_LED_USB, + .active_low = 1, + }, { + .name = "planex:green:ap", + .gpio = MZK_W04NU_GPIO_LED_AP, + .active_low = 1, + }, { + .name = "planex:green:router", + .gpio = MZK_W04NU_GPIO_LED_ROUTER, + .active_low = 1, + } +}; + +static struct gpio_keys_button mzk_w04nu_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL, + .gpio = MZK_W04NU_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL, + .gpio = MZK_W04NU_GPIO_BTN_WPS, + .active_low = 1, + }, { + .desc = "aprouter", + .type = EV_KEY, + .code = BTN_2, + .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL, + .gpio = MZK_W04NU_GPIO_BTN_APROUTER, + .active_low = 0, + } +}; + +#define MZK_W04NU_WAN_PHYMASK BIT(4) +#define MZK_W04NU_MDIO_MASK (~MZK_W04NU_WAN_PHYMASK) + +static void __init mzk_w04nu_setup(void) +{ + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + + ar71xx_add_device_mdio(0, MZK_W04NU_MDIO_MASK); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, eeprom, 0); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth0_data.speed = SPEED_100; + ar71xx_eth0_data.duplex = DUPLEX_FULL; + ar71xx_eth0_data.has_ar8216 = 1; + + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, eeprom, 1); + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth1_data.phy_mask = MZK_W04NU_WAN_PHYMASK; + + ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + + ar71xx_add_device_m25p80(&mzk_w04nu_flash_data); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(mzk_w04nu_leds_gpio), + mzk_w04nu_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, MZK_W04NU_KEYS_POLL_INTERVAL, + ARRAY_SIZE(mzk_w04nu_gpio_keys), + mzk_w04nu_gpio_keys); + ar71xx_add_device_usb(); + + ar9xxx_add_device_wmac(eeprom, NULL); +} + +MIPS_MACHINE(AR71XX_MACH_MZK_W04NU, "MZK-W04NU", "Planex MZK-W04NU", + mzk_w04nu_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-mzk-w300nh.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-mzk-w300nh.c new file mode 100644 index 000000000..98b3f0092 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-mzk-w300nh.c @@ -0,0 +1,159 @@ +/* + * Planex MZK-W300NH board support + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-ar9xxx-wmac.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" + +#define MZK_W300NH_GPIO_LED_STATUS 1 +#define MZK_W300NH_GPIO_LED_WPS 3 +#define MZK_W300NH_GPIO_LED_WLAN 6 +#define MZK_W300NH_GPIO_LED_AP 15 +#define MZK_W300NH_GPIO_LED_ROUTER 16 + +#define MZK_W300NH_GPIO_BTN_APROUTER 5 +#define MZK_W300NH_GPIO_BTN_WPS 12 +#define MZK_W300NH_GPIO_BTN_RESET 21 + +#define MZK_W300NH_KEYS_POLL_INTERVAL 20 /* msecs */ +#define MZK_W300NH_KEYS_DEBOUNCE_INTERVAL (3 * MZK_W300NH_KEYS_POLL_INTERVAL) + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition mzk_w300nh_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x040000, + .size = 0x010000, + }, { + .name = "kernel", + .offset = 0x050000, + .size = 0x160000, + }, { + .name = "rootfs", + .offset = 0x1b0000, + .size = 0x630000, + }, { + .name = "art", + .offset = 0x7e0000, + .size = 0x020000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x050000, + .size = 0x790000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct flash_platform_data mzk_w300nh_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .parts = mzk_w300nh_partitions, + .nr_parts = ARRAY_SIZE(mzk_w300nh_partitions), +#endif +}; + +static struct gpio_led mzk_w300nh_leds_gpio[] __initdata = { + { + .name = "planex:green:status", + .gpio = MZK_W300NH_GPIO_LED_STATUS, + .active_low = 1, + }, { + .name = "planex:blue:wps", + .gpio = MZK_W300NH_GPIO_LED_WPS, + .active_low = 1, + }, { + .name = "planex:green:wlan", + .gpio = MZK_W300NH_GPIO_LED_WLAN, + .active_low = 1, + }, { + .name = "planex:green:ap", + .gpio = MZK_W300NH_GPIO_LED_AP, + .active_low = 1, + }, { + .name = "planex:green:router", + .gpio = MZK_W300NH_GPIO_LED_ROUTER, + .active_low = 1, + } +}; + +static struct gpio_keys_button mzk_w300nh_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL, + .gpio = MZK_W300NH_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL, + .gpio = MZK_W300NH_GPIO_BTN_WPS, + .active_low = 1, + }, { + .desc = "aprouter", + .type = EV_KEY, + .code = BTN_2, + .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL, + .gpio = MZK_W300NH_GPIO_BTN_APROUTER, + .active_low = 0, + } +}; + +#define MZK_W300NH_WAN_PHYMASK BIT(4) +#define MZK_W300NH_MDIO_MASK (~MZK_W300NH_WAN_PHYMASK) + +static void __init mzk_w300nh_setup(void) +{ + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + + ar71xx_add_device_mdio(0, MZK_W300NH_MDIO_MASK); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, eeprom, 0); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth0_data.speed = SPEED_100; + ar71xx_eth0_data.duplex = DUPLEX_FULL; + ar71xx_eth0_data.has_ar8216 = 1; + + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, eeprom, 1); + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth1_data.phy_mask = MZK_W300NH_WAN_PHYMASK; + + ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + + ar71xx_add_device_m25p80(&mzk_w300nh_flash_data); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(mzk_w300nh_leds_gpio), + mzk_w300nh_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, MZK_W300NH_KEYS_POLL_INTERVAL, + ARRAY_SIZE(mzk_w300nh_gpio_keys), + mzk_w300nh_gpio_keys); + ar9xxx_add_device_wmac(eeprom, NULL); +} + +MIPS_MACHINE(AR71XX_MACH_MZK_W300NH, "MZK-W300NH", "Planex MZK-W300NH", + mzk_w300nh_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-nbg460n.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-nbg460n.c new file mode 100644 index 000000000..e1d959243 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-nbg460n.c @@ -0,0 +1,225 @@ +/* + * Zyxel NBG 460N/550N/550NH board support + * + * Copyright (C) 2010 Michael Kurz <michi.kurz@googlemail.com> + * + * based on mach-tl-wr1043nd.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/delay.h> +#include <linux/rtl8366.h> + +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> +#include <linux/i2c-gpio.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-ar9xxx-wmac.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" + +/* LEDs */ +#define NBG460N_GPIO_LED_WPS 3 +#define NBG460N_GPIO_LED_WAN 6 +#define NBG460N_GPIO_LED_POWER 14 +#define NBG460N_GPIO_LED_WLAN 15 + +/* Buttons */ +#define NBG460N_GPIO_BTN_WPS 12 +#define NBG460N_GPIO_BTN_RESET 21 + +#define NBG460N_KEYS_POLL_INTERVAL 20 /* msecs */ +#define NBG460N_KEYS_DEBOUNCE_INTERVAL (3 * NBG460N_KEYS_POLL_INTERVAL) + +/* RTC chip PCF8563 I2C interface */ +#define NBG460N_GPIO_PCF8563_SDA 8 +#define NBG460N_GPIO_PCF8563_SCK 7 + +/* Switch configuration I2C interface */ +#define NBG460N_GPIO_RTL8366_SDA 16 +#define NBG460N_GPIO_RTL8366_SCK 18 + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition nbg460n_partitions[] = { + { + .name = "Bootbase", + .offset = 0, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "U-Boot Config", + .offset = 0x010000, + .size = 0x030000, + }, { + .name = "U-Boot", + .offset = 0x040000, + .size = 0x030000, + }, { + .name = "linux", + .offset = 0x070000, + .size = 0x0e0000, + }, { + .name = "rootfs", + .offset = 0x150000, + .size = 0x2a0000, + }, { + .name = "CalibData", + .offset = 0x3f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x070000, + .size = 0x380000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct flash_platform_data nbg460n_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .parts = nbg460n_partitions, + .nr_parts = ARRAY_SIZE(nbg460n_partitions), +#endif +}; + +static struct gpio_led nbg460n_leds_gpio[] __initdata = { + { + .name = "nbg460n:green:power", + .gpio = NBG460N_GPIO_LED_POWER, + .active_low = 0, + .default_trigger = "default-on", + }, { + .name = "nbg460n:green:wps", + .gpio = NBG460N_GPIO_LED_WPS, + .active_low = 0, + }, { + .name = "nbg460n:green:wlan", + .gpio = NBG460N_GPIO_LED_WLAN, + .active_low = 0, + }, { + /* Not really for controlling the LED, + when set low the LED blinks uncontrollable */ + .name = "nbg460n:green:wan", + .gpio = NBG460N_GPIO_LED_WAN, + .active_low = 0, + } +}; + +static struct gpio_keys_button nbg460n_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = NBG460N_KEYS_DEBOUNCE_INTERVAL, + .gpio = NBG460N_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = NBG460N_KEYS_DEBOUNCE_INTERVAL, + .gpio = NBG460N_GPIO_BTN_WPS, + .active_low = 1, + } +}; + +static struct i2c_gpio_platform_data nbg460n_i2c_device_platdata = { + .sda_pin = NBG460N_GPIO_PCF8563_SDA, + .scl_pin = NBG460N_GPIO_PCF8563_SCK, + .udelay = 10, +}; + +static struct platform_device nbg460n_i2c_device = { + .name = "i2c-gpio", + .id = -1, + .num_resources = 0, + .resource = NULL, + .dev = { + .platform_data = &nbg460n_i2c_device_platdata, + }, +}; + +static struct i2c_board_info nbg460n_i2c_devs[] __initdata = { + { + I2C_BOARD_INFO("pcf8563", 0x51), + }, +}; + +static void __devinit nbg460n_i2c_init(void) +{ + /* The gpio interface */ + platform_device_register(&nbg460n_i2c_device); + /* I2C devices */ + i2c_register_board_info(0, nbg460n_i2c_devs, + ARRAY_SIZE(nbg460n_i2c_devs)); +} + + +static struct rtl8366_platform_data nbg460n_rtl8366s_data = { + .gpio_sda = NBG460N_GPIO_RTL8366_SDA, + .gpio_sck = NBG460N_GPIO_RTL8366_SCK, +}; + +static struct platform_device nbg460n_rtl8366s_device = { + .name = RTL8366S_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &nbg460n_rtl8366s_data, + } +}; + +static void __init nbg460n_setup(void) +{ + /* end of bootloader sector contains mac address */ + u8 *mac = (u8 *) KSEG1ADDR(0x1fc0fff8); + /* last sector contains wlan calib data */ + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + + /* LAN Port */ + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); + ar71xx_eth0_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev; + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth0_data.speed = SPEED_1000; + ar71xx_eth0_data.duplex = DUPLEX_FULL; + + /* WAN Port */ + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); + ar71xx_eth1_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev; + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth1_data.phy_mask = 0x10; + + ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + + /* register the switch phy */ + platform_device_register(&nbg460n_rtl8366s_device); + + /* register flash */ + ar71xx_add_device_m25p80(&nbg460n_flash_data); + + ar9xxx_add_device_wmac(eeprom, mac); + + /* register RTC chip */ + nbg460n_i2c_init(); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(nbg460n_leds_gpio), + nbg460n_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, NBG460N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(nbg460n_gpio_keys), + nbg460n_gpio_keys); +} + +MIPS_MACHINE(AR71XX_MACH_NBG460N, "NBG460N", "Zyxel NBG460N/550N/550NH", + nbg460n_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-om2p.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-om2p.c new file mode 100644 index 000000000..e43ad745c --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-om2p.c @@ -0,0 +1,114 @@ +/* + * OpenMesh OM2P support + * + * Copyright (C) 2011 Marek Lindner <marek@open-mesh.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/platform_device.h> + +#include <asm/mach-ar71xx/ar71xx.h> +#include <asm/mach-ar71xx/gpio.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-ap91-pci.h" +#include "dev-m25p80.h" +#include "dev-leds-gpio.h" +#include "dev-gpio-buttons.h" + +#define OM2P_GPIO_LED_POWER 0 +#define OM2P_GPIO_LED_GREEN 13 +#define OM2P_GPIO_LED_RED 14 +#define OM2P_GPIO_LED_YELLOW 15 +#define OM2P_GPIO_LED_LAN 16 +#define OM2P_GPIO_LED_WAN 17 +#define OM2P_GPIO_BTN_RESET 11 + +#define OM2P_KEYS_POLL_INTERVAL 20 /* msecs */ +#define OM2P_KEYS_DEBOUNCE_INTERVAL (3 * OM2P_KEYS_POLL_INTERVAL) + +#define OM2P_WAN_PHYMASK BIT(4) + +static struct flash_platform_data om2p_flash_data = { + .type = "s25sl12800", + .name = "ar7240-nor0", +}; + +static struct gpio_led om2p_leds_gpio[] __initdata = { + { + .name = "om2p:blue:power", + .gpio = OM2P_GPIO_LED_POWER, + .active_low = 1, + }, { + .name = "om2p:red:wifi", + .gpio = OM2P_GPIO_LED_RED, + .active_low = 1, + }, { + .name = "om2p:yellow:wifi", + .gpio = OM2P_GPIO_LED_YELLOW, + .active_low = 1, + }, { + .name = "om2p:green:wifi", + .gpio = OM2P_GPIO_LED_GREEN, + .active_low = 1, + }, { + .name = "om2p:blue:lan", + .gpio = OM2P_GPIO_LED_LAN, + .active_low = 1, + }, { + .name = "om2p:blue:wan", + .gpio = OM2P_GPIO_LED_WAN, + .active_low = 1, + } +}; + +static struct gpio_keys_button om2p_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = OM2P_KEYS_DEBOUNCE_INTERVAL, + .gpio = OM2P_GPIO_BTN_RESET, + .active_low = 1, + } +}; + +static void __init om2p_setup(void) +{ + u8 *mac1 = (u8 *)KSEG1ADDR(0x1ffc0000); + u8 *mac2 = (u8 *)KSEG1ADDR(0x1ffc0000 + ETH_ALEN); + u8 *ee = (u8 *)KSEG1ADDR(0x1ffc1000); + + ar71xx_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); + + ar71xx_add_device_m25p80(&om2p_flash_data); + + ar71xx_add_device_mdio(0, ~OM2P_WAN_PHYMASK); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac1, 0); + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac2, 0); + + ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + + ap91_pci_init(ee, NULL); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(om2p_leds_gpio), + om2p_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, OM2P_KEYS_POLL_INTERVAL, + ARRAY_SIZE(om2p_gpio_keys), + om2p_gpio_keys); +} + +MIPS_MACHINE(AR71XX_MACH_OM2P, "OM2P", "OpenMesh OM2P", om2p_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-pb42.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-pb42.c new file mode 100644 index 000000000..1a3d8c51a --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-pb42.c @@ -0,0 +1,83 @@ +/* + * Atheros PB42 board support + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-gpio-buttons.h" +#include "dev-pb42-pci.h" +#include "dev-usb.h" + +#define PB42_KEYS_POLL_INTERVAL 20 /* msecs */ +#define PB42_KEYS_DEBOUNCE_INTERVAL (3 * PB42_KEYS_POLL_INTERVAL) + +#define PB42_GPIO_BTN_SW4 8 +#define PB42_GPIO_BTN_SW5 3 + +static struct gpio_keys_button pb42_gpio_keys[] __initdata = { + { + .desc = "sw4", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = PB42_KEYS_DEBOUNCE_INTERVAL, + .gpio = PB42_GPIO_BTN_SW4, + .active_low = 1, + }, { + .desc = "sw5", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = PB42_KEYS_DEBOUNCE_INTERVAL, + .gpio = PB42_GPIO_BTN_SW5, + .active_low = 1, + } +}; + +static const char *pb42_part_probes[] = { + "RedBoot", + NULL, +}; + +static struct flash_platform_data pb42_flash_data = { + .part_probes = pb42_part_probes, +}; + +#define PB42_WAN_PHYMASK BIT(20) +#define PB42_LAN_PHYMASK (BIT(16) | BIT(17) | BIT(18) | BIT(19)) +#define PB42_MDIO_PHYMASK (PB42_LAN_PHYMASK | PB42_WAN_PHYMASK) + +static void __init pb42_init(void) +{ + ar71xx_add_device_m25p80(&pb42_flash_data); + + ar71xx_add_device_mdio(0, ~PB42_MDIO_PHYMASK); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ar71xx_eth0_data.phy_mask = PB42_WAN_PHYMASK; + + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1); + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth1_data.speed = SPEED_100; + ar71xx_eth1_data.duplex = DUPLEX_FULL; + + ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + + ar71xx_register_gpio_keys_polled(-1, PB42_KEYS_POLL_INTERVAL, + ARRAY_SIZE(pb42_gpio_keys), + pb42_gpio_keys); + + pb42_pci_init(); +} + +MIPS_MACHINE(AR71XX_MACH_PB42, "PB42", "Atheros PB42", pb42_init); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-pb44.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-pb44.c new file mode 100644 index 000000000..5e013504e --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-pb44.c @@ -0,0 +1,223 @@ +/* + * Atheros PB44 board support + * + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/spi/vsc7385.h> +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> +#include <linux/i2c/pcf857x.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-pb42-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-usb.h" + +#define PB44_PCF8757_VSC7395_CS 0 +#define PB44_PCF8757_STEREO_CS 1 +#define PB44_PCF8757_SLIC_CS0 2 +#define PB44_PCF8757_SLIC_TEST 3 +#define PB44_PCF8757_SLIC_INT0 4 +#define PB44_PCF8757_SLIC_INT1 5 +#define PB44_PCF8757_SW_RESET 6 +#define PB44_PCF8757_SW_JUMP 8 +#define PB44_PCF8757_LED_JUMP1 9 +#define PB44_PCF8757_LED_JUMP2 10 +#define PB44_PCF8757_TP24 11 +#define PB44_PCF8757_TP25 12 +#define PB44_PCF8757_TP26 13 +#define PB44_PCF8757_TP27 14 +#define PB44_PCF8757_TP28 15 + +#define PB44_GPIO_I2C_SCL 0 +#define PB44_GPIO_I2C_SDA 1 + +#define PB44_GPIO_EXP_BASE 16 +#define PB44_GPIO_VSC7395_CS (PB44_GPIO_EXP_BASE + PB44_PCF8757_VSC7395_CS) +#define PB44_GPIO_SW_RESET (PB44_GPIO_EXP_BASE + PB44_PCF8757_SW_RESET) +#define PB44_GPIO_SW_JUMP (PB44_GPIO_EXP_BASE + PB44_PCF8757_SW_JUMP) +#define PB44_GPIO_LED_JUMP1 (PB44_GPIO_EXP_BASE + PB44_PCF8757_LED_JUMP1) +#define PB44_GPIO_LED_JUMP2 (PB44_GPIO_EXP_BASE + PB44_PCF8757_LED_JUMP2) + +#define PB44_KEYS_POLL_INTERVAL 20 /* msecs */ +#define PB44_KEYS_DEBOUNCE_INTERVAL (3 * PB44_KEYS_POLL_INTERVAL) + +static struct i2c_gpio_platform_data pb44_i2c_gpio_data = { + .sda_pin = PB44_GPIO_I2C_SDA, + .scl_pin = PB44_GPIO_I2C_SCL, +}; + +static struct platform_device pb44_i2c_gpio_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &pb44_i2c_gpio_data, + } +}; + +static struct pcf857x_platform_data pb44_pcf857x_data = { + .gpio_base = PB44_GPIO_EXP_BASE, +}; + +static struct i2c_board_info pb44_i2c_board_info[] __initdata = { + { + I2C_BOARD_INFO("pcf8575", 0x20), + .platform_data = &pb44_pcf857x_data, + }, +}; + +static struct gpio_led pb44_leds_gpio[] __initdata = { + { + .name = "pb44:amber:jump1", + .gpio = PB44_GPIO_LED_JUMP1, + .active_low = 1, + }, { + .name = "pb44:green:jump2", + .gpio = PB44_GPIO_LED_JUMP2, + .active_low = 1, + }, +}; + +static struct gpio_keys_button pb44_gpio_keys[] __initdata = { + { + .desc = "soft_reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = PB44_KEYS_DEBOUNCE_INTERVAL, + .gpio = PB44_GPIO_SW_RESET, + .active_low = 1, + }, { + .desc = "jumpstart", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = PB44_KEYS_DEBOUNCE_INTERVAL, + .gpio = PB44_GPIO_SW_JUMP, + .active_low = 1, + } +}; + +static void pb44_vsc7395_reset(void) +{ + ar71xx_device_stop(RESET_MODULE_GE1_PHY); + udelay(10); + ar71xx_device_start(RESET_MODULE_GE1_PHY); + mdelay(50); +} + +static struct vsc7385_platform_data pb44_vsc7395_data = { + .reset = pb44_vsc7395_reset, + .ucode_name = "vsc7395_ucode_pb44.bin", + .mac_cfg = { + .tx_ipg = 6, + .bit2 = 1, + .clk_sel = 0, + }, +}; + +static const char *pb44_part_probes[] = { + "RedBoot", + NULL, +}; + +static struct flash_platform_data pb44_flash_data = { + .part_probes = pb44_part_probes, +}; + +static struct spi_board_info pb44_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "m25p80", + .platform_data = &pb44_flash_data, + }, { + .bus_num = 0, + .chip_select = 1, + .max_speed_hz = 25000000, + .modalias = "spi-vsc7385", + .platform_data = &pb44_vsc7395_data, + .controller_data = (void *) PB44_GPIO_VSC7395_CS, + }, +}; + +static struct resource pb44_spi_resources[] = { + [0] = { + .start = AR71XX_SPI_BASE, + .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct ar71xx_spi_platform_data pb44_spi_data = { + .bus_num = 0, + .num_chipselect = 2, +}; + +static struct platform_device pb44_spi_device = { + .name = "pb44-spi", + .id = -1, + .resource = pb44_spi_resources, + .num_resources = ARRAY_SIZE(pb44_spi_resources), + .dev = { + .platform_data = &pb44_spi_data, + }, +}; + +#define PB44_WAN_PHYMASK BIT(0) +#define PB44_LAN_PHYMASK 0 +#define PB44_MDIO_PHYMASK (PB44_LAN_PHYMASK | PB44_WAN_PHYMASK) + +static void __init pb44_init(void) +{ + ar71xx_add_device_mdio(0, ~PB44_MDIO_PHYMASK); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth0_data.phy_mask = PB44_WAN_PHYMASK; + + ar71xx_add_device_eth(0); + + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1); + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth1_data.speed = SPEED_1000; + ar71xx_eth1_data.duplex = DUPLEX_FULL; + ar71xx_eth1_pll_data.pll_1000 = 0x110000; + + ar71xx_add_device_eth(1); + + ar71xx_add_device_usb(); + + pb42_pci_init(); + + i2c_register_board_info(0, pb44_i2c_board_info, + ARRAY_SIZE(pb44_i2c_board_info)); + + platform_device_register(&pb44_i2c_gpio_device); + + spi_register_board_info(pb44_spi_info, ARRAY_SIZE(pb44_spi_info)); + platform_device_register(&pb44_spi_device); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(pb44_leds_gpio), + pb44_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, PB44_KEYS_POLL_INTERVAL, + ARRAY_SIZE(pb44_gpio_keys), + pb44_gpio_keys); +} + +MIPS_MACHINE(AR71XX_MACH_PB44, "PB44", "Atheros PB44", pb44_init); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-pb92.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-pb92.c new file mode 100644 index 000000000..4c5d3ab4a --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-pb92.c @@ -0,0 +1,105 @@ +/* + * Atheros PB92 board support + * + * Copyright (C) 2010 Felix Fietkau <nbd@openwrt.org> + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-gpio-buttons.h" +#include "dev-pb9x-pci.h" +#include "dev-usb.h" + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition pb92_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x040000, + .size = 0x010000, + }, { + .name = "rootfs", + .offset = 0x050000, + .size = 0x2b0000, + }, { + .name = "uImage", + .offset = 0x300000, + .size = 0x0e0000, + }, { + .name = "ART", + .offset = 0x3e0000, + .size = 0x020000, + .mask_flags = MTD_WRITEABLE, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct flash_platform_data pb92_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .parts = pb92_partitions, + .nr_parts = ARRAY_SIZE(pb92_partitions), +#endif +}; + +#define PB92_KEYS_POLL_INTERVAL 20 /* msecs */ +#define PB92_KEYS_DEBOUNCE_INTERVAL (3 * PB92_KEYS_POLL_INTERVAL) + +#define PB92_GPIO_BTN_SW4 8 +#define PB92_GPIO_BTN_SW5 3 + +static struct gpio_keys_button pb92_gpio_keys[] __initdata = { + { + .desc = "sw4", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = PB92_KEYS_DEBOUNCE_INTERVAL, + .gpio = PB92_GPIO_BTN_SW4, + .active_low = 1, + }, { + .desc = "sw5", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = PB92_KEYS_DEBOUNCE_INTERVAL, + .gpio = PB92_GPIO_BTN_SW5, + .active_low = 1, + } +}; + +static void __init pb92_init(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); + + ar71xx_add_device_m25p80(&pb92_flash_data); + + ar71xx_add_device_mdio(0, ~BIT(0)); + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth0_data.speed = SPEED_1000; + ar71xx_eth0_data.duplex = DUPLEX_FULL; + ar71xx_eth0_data.phy_mask = BIT(0); + + ar71xx_add_device_eth(0); + + ar71xx_register_gpio_keys_polled(-1, PB92_KEYS_POLL_INTERVAL, + ARRAY_SIZE(pb92_gpio_keys), + pb92_gpio_keys); + + pb9x_pci_init(); +} + +MIPS_MACHINE(AR71XX_MACH_PB92, "PB92", "Atheros PB92", pb92_init); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-rb4xx.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-rb4xx.c new file mode 100644 index 000000000..1b9f96bce --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-rb4xx.c @@ -0,0 +1,406 @@ +/* + * MikroTik RouterBOARD 4xx series support + * + * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <linux/mdio-gpio.h> +#include <linux/mmc/host.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/spi/mmc_spi.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-ar71xx/ar71xx.h> +#include <asm/mach-ar71xx/pci.h> +#include <asm/mach-ar71xx/rb4xx_cpld.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-usb.h" + +#define RB4XX_GPIO_USER_LED 4 +#define RB4XX_GPIO_RESET_SWITCH 7 + +#define RB4XX_GPIO_CPLD_BASE 32 +#define RB4XX_GPIO_CPLD_LED1 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED1) +#define RB4XX_GPIO_CPLD_LED2 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED2) +#define RB4XX_GPIO_CPLD_LED3 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED3) +#define RB4XX_GPIO_CPLD_LED4 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED4) +#define RB4XX_GPIO_CPLD_LED5 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED5) + +#define RB4XX_KEYS_POLL_INTERVAL 20 /* msecs */ +#define RB4XX_KEYS_DEBOUNCE_INTERVAL (3 * RB4XX_KEYS_POLL_INTERVAL) + +static struct gpio_led rb4xx_leds_gpio[] __initdata = { + { + .name = "rb4xx:yellow:user", + .gpio = RB4XX_GPIO_USER_LED, + .active_low = 0, + }, { + .name = "rb4xx:green:led1", + .gpio = RB4XX_GPIO_CPLD_LED1, + .active_low = 1, + }, { + .name = "rb4xx:green:led2", + .gpio = RB4XX_GPIO_CPLD_LED2, + .active_low = 1, + }, { + .name = "rb4xx:green:led3", + .gpio = RB4XX_GPIO_CPLD_LED3, + .active_low = 1, + }, { + .name = "rb4xx:green:led4", + .gpio = RB4XX_GPIO_CPLD_LED4, + .active_low = 1, + }, { + .name = "rb4xx:green:led5", + .gpio = RB4XX_GPIO_CPLD_LED5, + .active_low = 0, + }, +}; + +static struct gpio_keys_button rb4xx_gpio_keys[] __initdata = { + { + .desc = "reset_switch", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = RB4XX_KEYS_DEBOUNCE_INTERVAL, + .gpio = RB4XX_GPIO_RESET_SWITCH, + .active_low = 1, + } +}; + +static struct platform_device rb4xx_nand_device = { + .name = "rb4xx-nand", + .id = -1, +}; + +static struct ar71xx_pci_irq rb4xx_pci_irqs[] __initdata = { + { + .slot = 0, + .pin = 1, + .irq = AR71XX_PCI_IRQ_DEV2, + }, { + .slot = 1, + .pin = 1, + .irq = AR71XX_PCI_IRQ_DEV0, + }, { + .slot = 1, + .pin = 2, + .irq = AR71XX_PCI_IRQ_DEV1, + }, { + .slot = 2, + .pin = 1, + .irq = AR71XX_PCI_IRQ_DEV1, + }, { + .slot = 3, + .pin = 1, + .irq = AR71XX_PCI_IRQ_DEV2, + } +}; + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition rb4xx_partitions[] = { + { + .name = "routerboot", + .offset = 0, + .size = 0x0b000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "hard_config", + .offset = 0x0b000, + .size = 0x01000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "bios", + .offset = 0x0d000, + .size = 0x02000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "soft_config", + .offset = 0x0f000, + .size = 0x01000, + } +}; +#define rb4xx_num_partitions ARRAY_SIZE(rb4xx_partitions) +#else /* CONFIG_MTD_PARTITIONS */ +#define rb4xx_partitions NULL +#define rb4xx_num_partitions 0 +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct flash_platform_data rb4xx_flash_data = { + .type = "pm25lv512", + .parts = rb4xx_partitions, + .nr_parts = rb4xx_num_partitions, +}; + +static struct rb4xx_cpld_platform_data rb4xx_cpld_data = { + .gpio_base = RB4XX_GPIO_CPLD_BASE, +}; + +static struct mmc_spi_platform_data rb4xx_mmc_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, +}; + +static struct spi_board_info rb4xx_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "m25p80", + .platform_data = &rb4xx_flash_data, + }, { + .bus_num = 0, + .chip_select = 1, + .max_speed_hz = 25000000, + .modalias = "spi-rb4xx-cpld", + .platform_data = &rb4xx_cpld_data, + } +}; + +static struct spi_board_info rb4xx_microsd_info[] = { + { + .bus_num = 0, + .chip_select = 2, + .max_speed_hz = 25000000, + .modalias = "mmc_spi", + .platform_data = &rb4xx_mmc_data, + } +}; + + +static struct resource rb4xx_spi_resources[] = { + { + .start = AR71XX_SPI_BASE, + .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device rb4xx_spi_device = { + .name = "rb4xx-spi", + .id = -1, + .resource = rb4xx_spi_resources, + .num_resources = ARRAY_SIZE(rb4xx_spi_resources), +}; + +static void __init rb4xx_generic_setup(void) +{ + ar71xx_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN | + AR71XX_GPIO_FUNC_SPI_CS2_EN); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio), + rb4xx_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, RB4XX_KEYS_POLL_INTERVAL, + ARRAY_SIZE(rb4xx_gpio_keys), + rb4xx_gpio_keys); + + spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info)); + platform_device_register(&rb4xx_spi_device); + platform_device_register(&rb4xx_nand_device); +} + +static void __init rb411_setup(void) +{ + rb4xx_generic_setup(); + spi_register_board_info(rb4xx_microsd_info, + ARRAY_SIZE(rb4xx_microsd_info)); + + ar71xx_add_device_mdio(0, 0xfffffffc); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ar71xx_eth0_data.phy_mask = 0x00000003; + + ar71xx_add_device_eth(0); + + ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); +} + +MIPS_MACHINE(AR71XX_MACH_RB_411, "411", "MikroTik RouterBOARD 411/A/AH", + rb411_setup); + +static void __init rb411u_setup(void) +{ + rb411_setup(); + ar71xx_add_device_usb(); +} + +MIPS_MACHINE(AR71XX_MACH_RB_411U, "411U", "MikroTik RouterBOARD 411U", + rb411u_setup); + +#define RB433_LAN_PHYMASK BIT(0) +#define RB433_WAN_PHYMASK BIT(4) +#define RB433_MDIO_PHYMASK (RB433_LAN_PHYMASK | RB433_WAN_PHYMASK) + +static void __init rb433_setup(void) +{ + rb4xx_generic_setup(); + spi_register_board_info(rb4xx_microsd_info, + ARRAY_SIZE(rb4xx_microsd_info)); + + ar71xx_add_device_mdio(0, ~RB433_MDIO_PHYMASK); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 1); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ar71xx_eth0_data.phy_mask = RB433_LAN_PHYMASK; + + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 0); + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth1_data.phy_mask = RB433_WAN_PHYMASK; + + ar71xx_add_device_eth(1); + ar71xx_add_device_eth(0); + + ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); +} + +MIPS_MACHINE(AR71XX_MACH_RB_433, "433", "MikroTik RouterBOARD 433/AH", + rb433_setup); + +static void __init rb433u_setup(void) +{ + rb433_setup(); + ar71xx_add_device_usb(); +} + +MIPS_MACHINE(AR71XX_MACH_RB_433U, "433U", "MikroTik RouterBOARD 433UAH", + rb433u_setup); + +#define RB450_LAN_PHYMASK BIT(0) +#define RB450_WAN_PHYMASK BIT(4) +#define RB450_MDIO_PHYMASK (RB450_LAN_PHYMASK | RB450_WAN_PHYMASK) + +static void __init rb450_generic_setup(int gige) +{ + rb4xx_generic_setup(); + ar71xx_add_device_mdio(0, ~RB450_MDIO_PHYMASK); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 1); + ar71xx_eth0_data.phy_if_mode = (gige) ? + PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_MII; + ar71xx_eth0_data.phy_mask = RB450_LAN_PHYMASK; + + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 0); + ar71xx_eth1_data.phy_if_mode = (gige) ? + PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_RMII; + ar71xx_eth1_data.phy_mask = RB450_WAN_PHYMASK; + + ar71xx_add_device_eth(1); + ar71xx_add_device_eth(0); +} + +static void __init rb450_setup(void) +{ + rb450_generic_setup(0); +} + +MIPS_MACHINE(AR71XX_MACH_RB_450, "450", "MikroTik RouterBOARD 450", + rb450_setup); + +static void __init rb450g_setup(void) +{ + rb450_generic_setup(1); + spi_register_board_info(rb4xx_microsd_info, + ARRAY_SIZE(rb4xx_microsd_info)); +} + +MIPS_MACHINE(AR71XX_MACH_RB_450G, "450G", "MikroTik RouterBOARD 450G", + rb450g_setup); + +static void __init rb493_setup(void) +{ + rb4xx_generic_setup(); + + ar71xx_add_device_mdio(0, 0x3fffff00); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ar71xx_eth0_data.speed = SPEED_100; + ar71xx_eth0_data.duplex = DUPLEX_FULL; + + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1); + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth1_data.phy_mask = 0x00000001; + + ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + + ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); +} + +MIPS_MACHINE(AR71XX_MACH_RB_493, "493", "MikroTik RouterBOARD 493/AH", + rb493_setup); + +#define RB493G_GPIO_MDIO_MDC 7 +#define RB493G_GPIO_MDIO_DATA 8 + +#define RB493G_MDIO_PHYMASK BIT(0) + +static struct mdio_gpio_platform_data rb493g_mdio_data = { + .mdc = RB493G_GPIO_MDIO_MDC, + .mdio = RB493G_GPIO_MDIO_DATA, + + .phy_mask = ~RB493G_MDIO_PHYMASK, +}; + +static struct platform_device rb493g_mdio_device = { + .name = "mdio-gpio", + .id = -1, + .dev = { + .platform_data = &rb493g_mdio_data, + }, +}; + +static void __init rb493g_setup(void) +{ + ar71xx_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN | + AR71XX_GPIO_FUNC_SPI_CS2_EN); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio), + rb4xx_leds_gpio); + + spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info)); + platform_device_register(&rb4xx_spi_device); + platform_device_register(&rb4xx_nand_device); + + ar71xx_add_device_mdio(0, ~RB493G_MDIO_PHYMASK); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth0_data.phy_mask = RB493G_MDIO_PHYMASK; + ar71xx_eth0_data.speed = SPEED_1000; + ar71xx_eth0_data.duplex = DUPLEX_FULL; + + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1); + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth1_data.mii_bus_dev = &rb493g_mdio_device.dev; + ar71xx_eth1_data.phy_mask = RB493G_MDIO_PHYMASK; + ar71xx_eth1_data.speed = SPEED_1000; + ar71xx_eth1_data.duplex = DUPLEX_FULL; + + + platform_device_register(&rb493g_mdio_device); + + ar71xx_add_device_eth(1); + ar71xx_add_device_eth(0); + + ar71xx_add_device_usb(); + + ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); +} + +MIPS_MACHINE(AR71XX_MACH_RB_493G, "493G", "MikroTik RouterBOARD 493G", + rb493g_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-rb750.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-rb750.c new file mode 100644 index 000000000..9b63dc368 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-rb750.c @@ -0,0 +1,136 @@ +/* + * MikroTik RouterBOARD 750 support + * + * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <asm/mach-ar71xx/ar71xx.h> +#include <asm/mach-ar71xx/mach-rb750.h> + +#include "machtype.h" +#include "devices.h" + +static struct rb750_led_data rb750_leds[] = { + { + .name = "rb750:green:act", + .mask = RB750_LED_ACT, + .active_low = 1, + }, { + .name = "rb750:green:port1", + .mask = RB750_LED_PORT5, + .active_low = 1, + }, { + .name = "rb750:green:port2", + .mask = RB750_LED_PORT4, + .active_low = 1, + }, { + .name = "rb750:green:port3", + .mask = RB750_LED_PORT3, + .active_low = 1, + }, { + .name = "rb750:green:port4", + .mask = RB750_LED_PORT2, + .active_low = 1, + }, { + .name = "rb750:green:port5", + .mask = RB750_LED_PORT1, + .active_low = 1, + } +}; + +static struct rb750_led_platform_data rb750_leds_data = { + .num_leds = ARRAY_SIZE(rb750_leds), + .leds = rb750_leds, +}; + +static struct platform_device rb750_leds_device = { + .name = "leds-rb750", + .dev = { + .platform_data = &rb750_leds_data, + } +}; + +static struct platform_device rb750_nand_device = { + .name = "rb750-nand", + .id = -1, +}; + +int rb750_latch_change(u32 mask_clr, u32 mask_set) +{ + static DEFINE_SPINLOCK(lock); + static u32 latch_set = RB750_LED_BITS | RB750_LVC573_LE; + static u32 latch_oe; + static u32 latch_clr; + unsigned long flags; + u32 t; + int ret = 0; + + spin_lock_irqsave(&lock, flags); + + if ((mask_clr & BIT(31)) != 0 && + (latch_set & RB750_LVC573_LE) == 0) { + goto unlock; + } + + latch_set = (latch_set | mask_set) & ~mask_clr; + latch_clr = (latch_clr | mask_clr) & ~mask_set; + + if (latch_oe == 0) + latch_oe = __raw_readl(ar71xx_gpio_base + AR71XX_GPIO_REG_OE); + + if (likely(latch_set & RB750_LVC573_LE)) { + void __iomem *base = ar71xx_gpio_base; + + t = __raw_readl(base + AR71XX_GPIO_REG_OE); + t |= mask_clr | latch_oe | mask_set; + + __raw_writel(t, base + AR71XX_GPIO_REG_OE); + __raw_writel(latch_clr, base + AR71XX_GPIO_REG_CLEAR); + __raw_writel(latch_set, base + AR71XX_GPIO_REG_SET); + } else if (mask_clr & RB750_LVC573_LE) { + void __iomem *base = ar71xx_gpio_base; + + latch_oe = __raw_readl(base + AR71XX_GPIO_REG_OE); + __raw_writel(RB750_LVC573_LE, base + AR71XX_GPIO_REG_CLEAR); + /* flush write */ + __raw_readl(base + AR71XX_GPIO_REG_CLEAR); + } + + ret = 1; + +unlock: + spin_unlock_irqrestore(&lock, flags); + return ret; +} +EXPORT_SYMBOL_GPL(rb750_latch_change); + +static void __init rb750_setup(void) +{ + ar71xx_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1); + + ar71xx_add_device_mdio(0, 0x0); + + /* LAN ports */ + ar71xx_add_device_eth(1); + + /* WAN port */ + ar71xx_add_device_eth(0); + + platform_device_register(&rb750_leds_device); + platform_device_register(&rb750_nand_device); +} + +MIPS_MACHINE(AR71XX_MACH_RB_750, "750i", "MikroTik RouterBOARD 750", + rb750_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-rw2458n.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-rw2458n.c new file mode 100644 index 000000000..02b655f13 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-rw2458n.c @@ -0,0 +1,101 @@ +/* + * Redwave RW2458N support + * + * Copyright (C) 2011-2012 Cezary Jackiewicz <cezary@eko.one.pl> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-ap91-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-usb.h" + +#define RW2458N_GPIO_LED_D3 1 +#define RW2458N_GPIO_LED_D4 0 +#define RW2458N_GPIO_LED_D5 11 +#define RW2458N_GPIO_LED_D6 7 +#define RW2458N_GPIO_BTN_RESET 12 + +#define RW2458N_KEYS_POLL_INTERVAL 20 /* msecs */ +#define RW2458N_KEYS_DEBOUNCE_INTERVAL (3 * RW2458N_KEYS_POLL_INTERVAL) + +static struct gpio_keys_button rw2458n_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = RW2458N_KEYS_DEBOUNCE_INTERVAL, + .gpio = RW2458N_GPIO_BTN_RESET, + .active_low = 1, + } +}; + +#define RW2458N_WAN_PHYMASK BIT(4) + +static struct gpio_led rw2458n_leds_gpio[] __initdata = { + { + .name = "rw2458n:green:d3", + .gpio = RW2458N_GPIO_LED_D3, + .active_low = 1, + }, { + .name = "rw2458n:green:d4", + .gpio = RW2458N_GPIO_LED_D4, + .active_low = 1, + }, { + .name = "rw2458n:green:d5", + .gpio = RW2458N_GPIO_LED_D5, + .active_low = 1, + }, { + .name = "rw2458n:green:d6", + .gpio = RW2458N_GPIO_LED_D6, + .active_low = 1, + } +}; + +static const char *rw2458n_part_probes[] = { + "RedBoot", + NULL, +}; + +static struct flash_platform_data rw2458n_flash_data = { + .part_probes = rw2458n_part_probes, +}; + +static void __init rw2458n_setup(void) +{ + u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); + u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + ar71xx_add_device_m25p80(&rw2458n_flash_data); + + ar71xx_add_device_mdio(0, ~RW2458N_WAN_PHYMASK); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac1, 0); + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac2, 0); + + ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + + ap91_pci_init(ee, NULL); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(rw2458n_leds_gpio), + rw2458n_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, RW2458N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(rw2458n_gpio_keys), + rw2458n_gpio_keys); + + ar71xx_add_device_usb(); +} + +MIPS_MACHINE(AR71XX_MACH_RW2458N, "RW2458N", "Redwave RW2458N", + rw2458n_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tew-632brp.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tew-632brp.c new file mode 100644 index 000000000..b7f9cb683 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tew-632brp.c @@ -0,0 +1,151 @@ +/* + * TrendNET TEW-632BRP board support + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-ar9xxx-wmac.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "nvram.h" + +#define TEW_632BRP_GPIO_LED_STATUS 1 +#define TEW_632BRP_GPIO_LED_WPS 3 +#define TEW_632BRP_GPIO_LED_WLAN 6 +#define TEW_632BRP_GPIO_BTN_WPS 12 +#define TEW_632BRP_GPIO_BTN_RESET 21 + +#define TEW_632BRP_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TEW_632BRP_KEYS_DEBOUNCE_INTERVAL (3 * TEW_632BRP_KEYS_POLL_INTERVAL) + +#define TEW_632BRP_CONFIG_ADDR 0x1f020000 +#define TEW_632BRP_CONFIG_SIZE 0x10000 + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition tew_632brp_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x020000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "config", + .offset = 0x020000, + .size = 0x010000, + }, { + .name = "kernel", + .offset = 0x030000, + .size = 0x0e0000, + }, { + .name = "rootfs", + .offset = 0x110000, + .size = 0x2e0000, + }, { + .name = "art", + .offset = 0x3f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x030000, + .size = 0x3c0000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct flash_platform_data tew_632brp_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .parts = tew_632brp_partitions, + .nr_parts = ARRAY_SIZE(tew_632brp_partitions), +#endif +}; + +static struct gpio_led tew_632brp_leds_gpio[] __initdata = { + { + .name = "tew-632brp:green:status", + .gpio = TEW_632BRP_GPIO_LED_STATUS, + .active_low = 1, + }, { + .name = "tew-632brp:blue:wps", + .gpio = TEW_632BRP_GPIO_LED_WPS, + .active_low = 1, + }, { + .name = "tew-632brp:green:wlan", + .gpio = TEW_632BRP_GPIO_LED_WLAN, + .active_low = 1, + } +}; + +static struct gpio_keys_button tew_632brp_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TEW_632BRP_KEYS_DEBOUNCE_INTERVAL, + .gpio = TEW_632BRP_GPIO_BTN_RESET, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = TEW_632BRP_KEYS_DEBOUNCE_INTERVAL, + .gpio = TEW_632BRP_GPIO_BTN_WPS, + } +}; + +#define TEW_632BRP_LAN_PHYMASK BIT(0) +#define TEW_632BRP_WAN_PHYMASK BIT(4) +#define TEW_632BRP_MDIO_MASK (~(TEW_632BRP_LAN_PHYMASK | \ + TEW_632BRP_WAN_PHYMASK)) + +static void __init tew_632brp_setup(void) +{ + const char *config = (char *) KSEG1ADDR(TEW_632BRP_CONFIG_ADDR); + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + u8 mac[6]; + u8 *wlan_mac = NULL; + + if (nvram_parse_mac_addr(config, TEW_632BRP_CONFIG_SIZE, + "lan_mac=", mac) == 0) { + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); + wlan_mac = mac; + } + + ar71xx_add_device_mdio(0, TEW_632BRP_MDIO_MASK); + + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth0_data.phy_mask = TEW_632BRP_LAN_PHYMASK; + + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth1_data.phy_mask = TEW_632BRP_WAN_PHYMASK; + + ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + + ar71xx_add_device_m25p80(&tew_632brp_flash_data); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tew_632brp_leds_gpio), + tew_632brp_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, TEW_632BRP_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tew_632brp_gpio_keys), + tew_632brp_gpio_keys); + + ar9xxx_add_device_wmac(eeprom, wlan_mac); +} + +MIPS_MACHINE(AR71XX_MACH_TEW_632BRP, "TEW-632BRP", "TRENDnet TEW-632BRP", + tew_632brp_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-mr3020.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-mr3020.c new file mode 100644 index 000000000..6af58d1a5 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-mr3020.c @@ -0,0 +1,122 @@ +/* + * TP-LINK TL-MR3020 board support + * + * Copyright (C) 2011 dongyuqi <729650915@qq.com> + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/gpio.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-ar9xxx-wmac.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" + +#define TL_MR3020_GPIO_LED_3G 27 +#define TL_MR3020_GPIO_LED_WLAN 0 +#define TL_MR3020_GPIO_LED_LAN 17 +#define TL_MR3020_GPIO_LED_WPS 26 + +#define TL_MR3020_GPIO_BTN_WPS 11 +#define TL_MR3020_GPIO_BTN_SW1 18 +#define TL_MR3020_GPIO_BTN_SW2 20 + +#define TL_MR3020_GPIO_USB_POWER 8 + +#define TL_MR3020_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TL_MR3020_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR3020_KEYS_POLL_INTERVAL) + +static const char *tl_mr3020_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data tl_mr3020_flash_data = { + .part_probes = tl_mr3020_part_probes, +}; + +static struct gpio_led tl_mr3020_leds_gpio[] __initdata = { + { + .name = "tp-link:green:3g", + .gpio = TL_MR3020_GPIO_LED_3G, + .active_low = 1, + }, + { + .name = "tp-link:green:wlan", + .gpio = TL_MR3020_GPIO_LED_WLAN, + .active_low = 0, + }, + { + .name = "tp-link:green:lan", + .gpio = TL_MR3020_GPIO_LED_LAN, + .active_low = 1, + }, + { + .name = "tp-link:green:wps", + .gpio = TL_MR3020_GPIO_LED_WPS, + .active_low = 1, + }, +}; + +static struct gpio_keys_button tl_mr3020_gpio_keys[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_MR3020_GPIO_BTN_WPS, + .active_low = 1, + }, + { + .desc = "sw1", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_MR3020_GPIO_BTN_SW1, + .active_low = 1, + }, + { + .desc = "sw2", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_MR3020_GPIO_BTN_SW2, + .active_low = 1, + } +}; + +static void __init tl_mr3020_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + ar71xx_add_device_m25p80(&tl_mr3020_flash_data); + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_mr3020_leds_gpio), + tl_mr3020_leds_gpio); + ar71xx_register_gpio_keys_polled(-1, TL_MR3020_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_mr3020_gpio_keys), + tl_mr3020_gpio_keys); + + gpio_request(TL_MR3020_GPIO_USB_POWER, "USB power"); + gpio_direction_output(TL_MR3020_GPIO_USB_POWER, 1); + ar71xx_add_device_usb(); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); + + ar71xx_add_device_mdio(0, 0x0); + ar71xx_add_device_eth(0); + + ar9xxx_add_device_wmac(ee, mac); +} + +MIPS_MACHINE(AR71XX_MACH_TL_MR3020, "TL-MR3020", "TP-LINK TL-MR3020 v1", + tl_mr3020_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-mr3x20.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-mr3x20.c new file mode 100644 index 000000000..5ee25d346 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-mr3x20.c @@ -0,0 +1,147 @@ +/* + * TP-LINK TL-MR3220/3420 board support + * + * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/gpio.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-ap91-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-usb.h" + +#define TL_MR3X20_GPIO_LED_QSS 0 +#define TL_MR3X20_GPIO_LED_SYSTEM 1 +#define TL_MR3X20_GPIO_LED_3G 8 + +#define TL_MR3X20_GPIO_BTN_RESET 11 +#define TL_MR3X20_GPIO_BTN_QSS 12 + +#define TL_MR3X20_GPIO_USB_POWER 6 + +#define TL_MR3X20_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TL_MR3X20_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR3X20_KEYS_POLL_INTERVAL) + +static const char *tl_mr3x20_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data tl_mr3x20_flash_data = { + .part_probes = tl_mr3x20_part_probes, +}; + +static struct gpio_led tl_mr3x20_leds_gpio[] __initdata = { + { + .name = "tp-link:green:system", + .gpio = TL_MR3X20_GPIO_LED_SYSTEM, + .active_low = 1, + }, { + .name = "tp-link:green:qss", + .gpio = TL_MR3X20_GPIO_LED_QSS, + .active_low = 1, + }, { + .name = "tp-link:green:3g", + .gpio = TL_MR3X20_GPIO_LED_3G, + .active_low = 1, + } +}; + +static struct gpio_keys_button tl_mr3x20_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TL_MR3X20_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_MR3X20_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "qss", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = TL_MR3X20_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_MR3X20_GPIO_BTN_QSS, + .active_low = 1, + } +}; + +static void __init tl_ap99_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + ar71xx_add_device_m25p80(&tl_mr3x20_flash_data); + + ar71xx_register_gpio_keys_polled(-1, TL_MR3X20_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_mr3x20_gpio_keys), + tl_mr3x20_gpio_keys); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 1); + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, -1); + + ar71xx_add_device_mdio(0, 0x0); + + /* LAN ports */ + ar71xx_add_device_eth(1); + /* WAN port */ + ar71xx_add_device_eth(0); + + ap91_pci_init(ee, mac); +} + +static void __init tl_mr3x20_usb_setup(void) +{ + /* enable power for the USB port */ + gpio_request(TL_MR3X20_GPIO_USB_POWER, "USB power"); + gpio_direction_output(TL_MR3X20_GPIO_USB_POWER, 1); + + ar71xx_add_device_usb(); +} + +static void __init tl_mr3220_setup(void) +{ + tl_ap99_setup(); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio), + tl_mr3x20_leds_gpio); + ap91_pci_setup_wmac_led_pin(1); + tl_mr3x20_usb_setup(); +} + +MIPS_MACHINE(AR71XX_MACH_TL_MR3220, "TL-MR3220", "TP-LINK TL-MR3220", + tl_mr3220_setup); + +static void __init tl_mr3420_setup(void) +{ + tl_ap99_setup(); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio), + tl_mr3x20_leds_gpio); + ap91_pci_setup_wmac_led_pin(0); + tl_mr3x20_usb_setup(); +} + +MIPS_MACHINE(AR71XX_MACH_TL_MR3420, "TL-MR3420", "TP-LINK TL-MR3420", + tl_mr3420_setup); + +static void __init tl_wr841n_v7_setup(void) +{ + tl_ap99_setup(); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio) - 1, + tl_mr3x20_leds_gpio); + ap91_pci_setup_wmac_led_pin(0); +} + +MIPS_MACHINE(AR71XX_MACH_TL_WR841N_V7, "TL-WR841N-v7", + "TP-LINK TL-WR841N/ND v7", tl_wr841n_v7_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wa901nd-v2.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wa901nd-v2.c new file mode 100644 index 000000000..7d9bbee83 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wa901nd-v2.c @@ -0,0 +1,104 @@ +/* + * TP-LINK TL-WA901ND v2 board support + * + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2010 Pieter Hollants <pieter@hollants.com> + * Copyright (C) 2011 Jonathan Bennett <jbscience87@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-ar9xxx-wmac.h" + +#define TL_WA901ND_V2_GPIO_LED_QSS 4 +#define TL_WA901ND_V2_GPIO_LED_SYSTEM 2 +#define TL_WA901ND_V2_GPIO_LED_WLAN 9 + + +#define TL_WA901ND_V2_GPIO_BTN_RESET 3 +#define TL_WA901ND_V2_GPIO_BTN_QSS 7 + +#define TL_WA901ND_V2_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL \ + (3 * TL_WA901ND_V2_KEYS_POLL_INTERVAL) + +static const char *tl_wa901nd_v2_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data tl_wa901nd_v2_flash_data = { + .part_probes = tl_wa901nd_v2_part_probes, +}; + +static struct gpio_led tl_wa901nd_v2_leds_gpio[] __initdata = { + { + .name = "tp-link:green:system", + .gpio = TL_WA901ND_V2_GPIO_LED_SYSTEM, + .active_low = 1, + }, { + .name = "tp-link:green:qss", + .gpio = TL_WA901ND_V2_GPIO_LED_QSS, + }, { + .name = "tp-link:green:wlan", + .gpio = TL_WA901ND_V2_GPIO_LED_WLAN, + .active_low = 1, + } +}; + +static struct gpio_keys_button tl_wa901nd_v2_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WA901ND_V2_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "qss", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WA901ND_V2_GPIO_BTN_QSS, + .active_low = 1, + } +}; + +static void __init tl_wa901nd_v2_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); + + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ar71xx_eth0_data.phy_mask = 0x00001000; + ar71xx_add_device_mdio(0, 0x0); + + ar71xx_eth0_data.reset_bit = RESET_MODULE_GE0_MAC | + RESET_MODULE_GE0_PHY; + ar71xx_add_device_eth(0); + + ar71xx_add_device_m25p80(&tl_wa901nd_v2_flash_data); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_v2_leds_gpio), + tl_wa901nd_v2_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, TL_WA901ND_V2_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_wa901nd_v2_gpio_keys), + tl_wa901nd_v2_gpio_keys); + + ar9xxx_add_device_wmac(eeprom, mac); +} + +MIPS_MACHINE(AR71XX_MACH_TL_WA901ND_V2, "TL-WA901ND-v2", + "TP-LINK TL-WA901ND v2", tl_wa901nd_v2_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wa901nd.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wa901nd.c new file mode 100644 index 000000000..056f35ab7 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wa901nd.c @@ -0,0 +1,107 @@ +/* + * TP-LINK TL-WA901ND board support + * + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2010 Pieter Hollants <pieter@hollants.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-ap91-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" + +#define TL_WA901ND_GPIO_LED_QSS 0 +#define TL_WA901ND_GPIO_LED_SYSTEM 1 +#define TL_WA901ND_GPIO_LED_LAN 13 + +#define TL_WA901ND_GPIO_BTN_RESET 11 +#define TL_WA901ND_GPIO_BTN_QSS 12 + +#define TL_WA901ND_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TL_WA901ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA901ND_KEYS_POLL_INTERVAL) + +static const char *tl_wa901nd_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data tl_wa901nd_flash_data = { + .part_probes = tl_wa901nd_part_probes, +}; + +static struct gpio_led tl_wa901nd_leds_gpio[] __initdata = { + { + .name = "tp-link:green:lan", + .gpio = TL_WA901ND_GPIO_LED_LAN, + .active_low = 1, + }, { + .name = "tp-link:green:system", + .gpio = TL_WA901ND_GPIO_LED_SYSTEM, + .active_low = 1, + }, { + .name = "tp-link:green:qss", + .gpio = TL_WA901ND_GPIO_LED_QSS, + .active_low = 1, + } +}; + +static struct gpio_keys_button tl_wa901nd_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WA901ND_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "qss", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WA901ND_GPIO_BTN_QSS, + .active_low = 1, + } +}; + +static void __init tl_wa901nd_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + ar71xx_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); + + /* + * ar71xx_eth0 would be the WAN port, but is not connected on + * the TL-WA901ND. ar71xx_eth1 connects to the internal switch chip, + * however we have a single LAN port only. + */ + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 0); + ar71xx_add_device_mdio(0, 0x0); + ar71xx_add_device_eth(1); + + ar71xx_add_device_m25p80(&tl_wa901nd_flash_data); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_leds_gpio), + tl_wa901nd_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, TL_WA901ND_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_wa901nd_gpio_keys), + tl_wa901nd_gpio_keys); + + ap91_pci_init(ee, mac); +} + +MIPS_MACHINE(AR71XX_MACH_TL_WA901ND, "TL-WA901ND", "TP-LINK TL-WA901ND", + tl_wa901nd_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr1043nd.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr1043nd.c new file mode 100644 index 000000000..3a844b774 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr1043nd.c @@ -0,0 +1,128 @@ +/* + * TP-LINK TL-WR1043ND board support + * + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/rtl8366.h> +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-ar9xxx-wmac.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-usb.h" + +#define TL_WR1043ND_GPIO_LED_USB 1 +#define TL_WR1043ND_GPIO_LED_SYSTEM 2 +#define TL_WR1043ND_GPIO_LED_QSS 5 +#define TL_WR1043ND_GPIO_LED_WLAN 9 + +#define TL_WR1043ND_GPIO_BTN_RESET 3 +#define TL_WR1043ND_GPIO_BTN_QSS 7 + +#define TL_WR1043ND_GPIO_RTL8366_SDA 18 +#define TL_WR1043ND_GPIO_RTL8366_SCK 19 + +#define TL_WR1043ND_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1043ND_KEYS_POLL_INTERVAL) + +static const char *tl_wr1043nd_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data tl_wr1043nd_flash_data = { + .part_probes = tl_wr1043nd_part_probes, +}; + +static struct gpio_led tl_wr1043nd_leds_gpio[] __initdata = { + { + .name = "tp-link:green:usb", + .gpio = TL_WR1043ND_GPIO_LED_USB, + .active_low = 1, + }, { + .name = "tp-link:green:system", + .gpio = TL_WR1043ND_GPIO_LED_SYSTEM, + .active_low = 1, + }, { + .name = "tp-link:green:qss", + .gpio = TL_WR1043ND_GPIO_LED_QSS, + .active_low = 0, + }, { + .name = "tp-link:green:wlan", + .gpio = TL_WR1043ND_GPIO_LED_WLAN, + .active_low = 1, + } +}; + +static struct gpio_keys_button tl_wr1043nd_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR1043ND_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "qss", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR1043ND_GPIO_BTN_QSS, + .active_low = 1, + } +}; + +static struct rtl8366_platform_data tl_wr1043nd_rtl8366rb_data = { + .gpio_sda = TL_WR1043ND_GPIO_RTL8366_SDA, + .gpio_sck = TL_WR1043ND_GPIO_RTL8366_SCK, +}; + +static struct platform_device tl_wr1043nd_rtl8366rb_device = { + .name = RTL8366RB_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &tl_wr1043nd_rtl8366rb_data, + } +}; + +static void __init tl_wr1043nd_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); + ar71xx_eth0_data.mii_bus_dev = &tl_wr1043nd_rtl8366rb_device.dev; + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth0_data.speed = SPEED_1000; + ar71xx_eth0_data.duplex = DUPLEX_FULL; + ar71xx_eth0_pll_data.pll_1000 = 0x1a000000; + + ar71xx_add_device_eth(0); + + ar71xx_add_device_usb(); + + ar71xx_add_device_m25p80(&tl_wr1043nd_flash_data); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_leds_gpio), + tl_wr1043nd_leds_gpio); + + platform_device_register(&tl_wr1043nd_rtl8366rb_device); + + ar71xx_register_gpio_keys_polled(-1, TL_WR1043ND_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_wr1043nd_gpio_keys), + tl_wr1043nd_gpio_keys); + + ar9xxx_add_device_wmac(eeprom, mac); +} + +MIPS_MACHINE(AR71XX_MACH_TL_WR1043ND, "TL-WR1043ND", "TP-LINK TL-WR1043ND", + tl_wr1043nd_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr2543n.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr2543n.c new file mode 100644 index 000000000..c547b7392 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr2543n.c @@ -0,0 +1,129 @@ +/* + * TP-LINK TL-WR2543ND board support + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/rtl8367.h> +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-ap91-pci.h" +#include "dev-m25p80.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-usb.h" + +#define TL_WR2543N_GPIO_LED_WPS 0 +#define TL_WR2543N_GPIO_LED_USB 8 + +#define TL_WR2543N_GPIO_BTN_RESET 11 +#define TL_WR2543N_GPIO_BTN_WPS 12 + +#define TL_WR2543N_GPIO_RTL8367_SDA 1 +#define TL_WR2543N_GPIO_RTL8367_SCK 6 + +#define TL_WR2543N_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TL_WR2543N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR2543N_KEYS_POLL_INTERVAL) + +static const char *tl_wr2543n_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data tl_wr2543n_flash_data = { + .part_probes = tl_wr2543n_part_probes, + .max_read_len = 64, +}; + +static struct gpio_led tl_wr2543n_leds_gpio[] __initdata = { + { + .name = "tp-link:green:usb", + .gpio = TL_WR2543N_GPIO_LED_USB, + .active_low = 1, + }, { + .name = "tp-link:green:wps", + .gpio = TL_WR2543N_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button tl_wr2543n_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TL_WR2543N_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR2543N_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = TL_WR2543N_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR2543N_GPIO_BTN_WPS, + } +}; + +static struct rtl8367_extif_config tl_wr2543n_rtl8367_extif0_cfg = { + .mode = RTL8367_EXTIF_MODE_RGMII, + .txdelay = 1, + .rxdelay = 0, + .ability = { + .force_mode = 1, + .txpause = 1, + .rxpause = 1, + .link = 1, + .duplex = 1, + .speed = RTL8367_PORT_SPEED_1000, + }, +}; + +static struct rtl8367_platform_data tl_wr2543n_rtl8367_data = { + .gpio_sda = TL_WR2543N_GPIO_RTL8367_SDA, + .gpio_sck = TL_WR2543N_GPIO_RTL8367_SCK, + .extif0_cfg = &tl_wr2543n_rtl8367_extif0_cfg, +}; + +static struct platform_device tl_wr2543n_rtl8367_device = { + .name = RTL8367_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &tl_wr2543n_rtl8367_data, + } +}; + +static void __init tl_wr2543n_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + + ar71xx_add_device_m25p80(&tl_wr2543n_flash_data); + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr2543n_leds_gpio), + tl_wr2543n_leds_gpio); + ar71xx_register_gpio_keys_polled(-1, TL_WR2543N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_wr2543n_gpio_keys), + tl_wr2543n_gpio_keys); + ar71xx_add_device_usb(); + ap91_pci_init(eeprom, mac); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, -1); + ar71xx_eth0_data.mii_bus_dev = &tl_wr2543n_rtl8367_device.dev; + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth0_data.speed = SPEED_1000; + ar71xx_eth0_data.duplex = DUPLEX_FULL; + ar71xx_eth0_pll_data.pll_1000 = 0x1a000000; + + ar71xx_add_device_eth(0); + + platform_device_register(&tl_wr2543n_rtl8367_device); +} + +MIPS_MACHINE(AR71XX_MACH_TL_WR2543N, "TL-WR2543N", "TP-LINK TL-WR2543N/ND", + tl_wr2543n_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr703n.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr703n.c new file mode 100644 index 000000000..e9c2f25fe --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr703n.c @@ -0,0 +1,85 @@ +/* + * TP-LINK TL-WR703N board support + * + * Copyright (C) 2011 dongyuqi <729650915@qq.com> + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/gpio.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-ar9xxx-wmac.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" + +#define TL_WR703N_GPIO_LED_SYSTEM 27 +#define TL_WR703N_GPIO_BTN_RESET 11 + +#define TL_WR703N_GPIO_USB_POWER 8 + +#define TL_WR703N_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TL_WR703N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR703N_KEYS_POLL_INTERVAL) + +static const char *tl_wr703n_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data tl_wr703n_flash_data = { + .part_probes = tl_wr703n_part_probes, +}; + +static struct gpio_led tl_wr703n_leds_gpio[] __initdata = { + { + .name = "tp-link:blue:system", + .gpio = TL_WR703N_GPIO_LED_SYSTEM, + .active_low = 1, + }, +}; + +static struct gpio_keys_button tl_wr703n_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TL_WR703N_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR703N_GPIO_BTN_RESET, + .active_low = 1, + } +}; + +static void __init tl_wr703n_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + ar71xx_add_device_m25p80(&tl_wr703n_flash_data); + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr703n_leds_gpio), + tl_wr703n_leds_gpio); + ar71xx_register_gpio_keys_polled(-1, TL_WR703N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_wr703n_gpio_keys), + tl_wr703n_gpio_keys); + + gpio_request(TL_WR703N_GPIO_USB_POWER, "USB power"); + gpio_direction_output(TL_WR703N_GPIO_USB_POWER, 1); + ar71xx_add_device_usb(); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); + + ar71xx_add_device_mdio(0, 0x0); + ar71xx_add_device_eth(0); + + ar9xxx_add_device_wmac(ee, mac); +} + +MIPS_MACHINE(AR71XX_MACH_TL_WR703N, "TL-WR703N", "TP-LINK TL-WR703N v1", + tl_wr703n_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr741nd-v4.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr741nd-v4.c new file mode 100644 index 000000000..8af72320c --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr741nd-v4.c @@ -0,0 +1,147 @@ +/* + * TP-LINK TL-WR741ND v4 board support + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/gpio.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-ar9xxx-wmac.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" + +#define TL_WR741NDV4_GPIO_BTN_RESET 11 +#define TL_WR741NDV4_GPIO_BTN_WPS 26 + +#define TL_WR741NDV4_GPIO_LED_WLAN 0 +#define TL_WR741NDV4_GPIO_LED_QSS 1 +#define TL_WR741NDV4_GPIO_LED_WAN 13 +#define TL_WR741NDV4_GPIO_LED_LAN1 14 +#define TL_WR741NDV4_GPIO_LED_LAN2 15 +#define TL_WR741NDV4_GPIO_LED_LAN3 16 +#define TL_WR741NDV4_GPIO_LED_LAN4 17 + +#define TL_WR741NDV4_GPIO_LED_SYSTEM 27 + +#define TL_WR741NDV4_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR741NDV4_KEYS_POLL_INTERVAL) + +static const char *tl_wr741ndv4_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data tl_wr741ndv4_flash_data = { + .part_probes = tl_wr741ndv4_part_probes, +}; + +static struct gpio_led tl_wr741ndv4_leds_gpio[] __initdata = { + { + .name = "tp-link:green:lan1", + .gpio = TL_WR741NDV4_GPIO_LED_LAN1, + .active_low = 0, + }, { + .name = "tp-link:green:lan2", + .gpio = TL_WR741NDV4_GPIO_LED_LAN2, + .active_low = 0, + }, { + .name = "tp-link:green:lan3", + .gpio = TL_WR741NDV4_GPIO_LED_LAN3, + .active_low = 0, + }, { + .name = "tp-link:green:lan4", + .gpio = TL_WR741NDV4_GPIO_LED_LAN4, + .active_low = 1, + }, { + .name = "tp-link:green:qss", + .gpio = TL_WR741NDV4_GPIO_LED_QSS, + .active_low = 0, + }, { + .name = "tp-link:green:system", + .gpio = TL_WR741NDV4_GPIO_LED_SYSTEM, + .active_low = 1, + }, { + .name = "tp-link:green:wan", + .gpio = TL_WR741NDV4_GPIO_LED_WAN, + .active_low = 0, + }, { + .name = "tp-link:green:wlan", + .gpio = TL_WR741NDV4_GPIO_LED_WLAN, + .active_low = 0, + }, +}; + +static struct gpio_keys_button tl_wr741ndv4_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR741NDV4_GPIO_BTN_RESET, + .active_low = 1, + } , { + .desc = "WPS", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR741NDV4_GPIO_BTN_WPS, + .active_low = 1, + } +}; + +static void __init tl_wr741ndv4_gmac_setup(void) +{ + void __iomem *base; + u32 t; + + base = ioremap(AR933X_GMAC_BASE, AR933X_GMAC_SIZE); + + t = __raw_readl(base + AR933X_GMAC_REG_ETH_CFG); + t |= (AR933X_ETH_CFG_SW_PHY_SWAP | AR933X_ETH_CFG_SW_PHY_ADDR_SWAP); + __raw_writel(t, base + AR933X_GMAC_REG_ETH_CFG); + + iounmap(base); +} + +static void __init tl_wr741ndv4_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + tl_wr741ndv4_gmac_setup(); + + ar71xx_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr741ndv4_leds_gpio), + tl_wr741ndv4_leds_gpio); + + ar71xx_register_gpio_keys_polled(1, TL_WR741NDV4_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_wr741ndv4_gpio_keys), + tl_wr741ndv4_gpio_keys); + + ar71xx_add_device_m25p80(&tl_wr741ndv4_flash_data); + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 1); + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, -1); + + ar71xx_add_device_mdio(0, 0x0); + ar71xx_add_device_eth(1); + ar71xx_add_device_eth(0); + + ar9xxx_add_device_wmac(ee, mac); +} + +MIPS_MACHINE(AR71XX_MACH_TL_WR741ND_V4, "TL-WR741ND-v4", + "TP-LINK TL-WR741ND v4", tl_wr741ndv4_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr741nd.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr741nd.c new file mode 100644 index 000000000..f877e9882 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr741nd.c @@ -0,0 +1,129 @@ +/* + * TP-LINK TL-WR741ND board support + * + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-ap91-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" + +#define TL_WR741ND_GPIO_LED_QSS 0 +#define TL_WR741ND_GPIO_LED_SYSTEM 1 +#define TL_WR741ND_GPIO_LED_LAN1 13 +#define TL_WR741ND_GPIO_LED_LAN2 14 +#define TL_WR741ND_GPIO_LED_LAN3 15 +#define TL_WR741ND_GPIO_LED_LAN4 16 +#define TL_WR741ND_GPIO_LED_WAN 17 + +#define TL_WR741ND_GPIO_BTN_RESET 11 +#define TL_WR741ND_GPIO_BTN_QSS 12 + +#define TL_WR741ND_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TL_WR741ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR741ND_KEYS_POLL_INTERVAL) + +static const char *tl_wr741nd_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data tl_wr741nd_flash_data = { + .part_probes = tl_wr741nd_part_probes, +}; + +static struct gpio_led tl_wr741nd_leds_gpio[] __initdata = { + { + .name = "tp-link:green:lan1", + .gpio = TL_WR741ND_GPIO_LED_LAN1, + .active_low = 1, + }, { + .name = "tp-link:green:lan2", + .gpio = TL_WR741ND_GPIO_LED_LAN2, + .active_low = 1, + }, { + .name = "tp-link:green:lan3", + .gpio = TL_WR741ND_GPIO_LED_LAN3, + .active_low = 1, + }, { + .name = "tp-link:green:lan4", + .gpio = TL_WR741ND_GPIO_LED_LAN4, + .active_low = 1, + }, { + .name = "tp-link:green:qss", + .gpio = TL_WR741ND_GPIO_LED_QSS, + .active_low = 1, + }, { + .name = "tp-link:green:system", + .gpio = TL_WR741ND_GPIO_LED_SYSTEM, + .active_low = 1, + }, { + .name = "tp-link:green:wan", + .gpio = TL_WR741ND_GPIO_LED_WAN, + .active_low = 1, + }, +}; + +static struct gpio_keys_button tl_wr741nd_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TL_WR741ND_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR741ND_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "qss", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = TL_WR741ND_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR741ND_GPIO_BTN_QSS, + .active_low = 1, + } +}; + +static void __init tl_wr741nd_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + ar71xx_add_device_m25p80(&tl_wr741nd_flash_data); + + ar71xx_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr741nd_leds_gpio), + tl_wr741nd_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, TL_WR741ND_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_wr741nd_gpio_keys), + tl_wr741nd_gpio_keys); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 1); + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, -1); + + ar71xx_add_device_mdio(0, 0x0); + + /* LAN ports */ + ar71xx_add_device_eth(1); + + /* WAN port */ + ar71xx_add_device_eth(0); + + ap91_pci_setup_wmac_led_pin(1); + + ap91_pci_init(ee, mac); +} +MIPS_MACHINE(AR71XX_MACH_TL_WR741ND, "TL-WR741ND", "TP-LINK TL-WR741ND", + tl_wr741nd_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr841n.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr841n.c new file mode 100644 index 000000000..3871b7e07 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr841n.c @@ -0,0 +1,145 @@ +/* + * TP-LINK TL-WR841N board support + * + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/platform_device.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-dsa.h" +#include "dev-m25p80.h" +#include "dev-gpio-buttons.h" +#include "dev-pb42-pci.h" +#include "dev-leds-gpio.h" + +#define TL_WR841ND_V1_GPIO_LED_SYSTEM 2 +#define TL_WR841ND_V1_GPIO_LED_QSS_GREEN 4 +#define TL_WR841ND_V1_GPIO_LED_QSS_RED 5 + +#define TL_WR841ND_V1_GPIO_BTN_RESET 3 +#define TL_WR841ND_V1_GPIO_BTN_QSS 7 + +#define TL_WR841ND_V1_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL \ + (3 * TL_WR841ND_V1_KEYS_POLL_INTERVAL) + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition tl_wr841n_v1_partitions[] = { + { + .name = "redboot", + .offset = 0, + .size = 0x020000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = 0x020000, + .size = 0x140000, + }, { + .name = "rootfs", + .offset = 0x160000, + .size = 0x280000, + }, { + .name = "config", + .offset = 0x3e0000, + .size = 0x020000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x020000, + .size = 0x3c0000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct flash_platform_data tl_wr841n_v1_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .parts = tl_wr841n_v1_partitions, + .nr_parts = ARRAY_SIZE(tl_wr841n_v1_partitions), +#endif +}; + +static struct gpio_led tl_wr841n_v1_leds_gpio[] __initdata = { + { + .name = "tp-link:green:system", + .gpio = TL_WR841ND_V1_GPIO_LED_SYSTEM, + .active_low = 1, + }, { + .name = "tp-link:red:qss", + .gpio = TL_WR841ND_V1_GPIO_LED_QSS_RED, + }, { + .name = "tp-link:green:qss", + .gpio = TL_WR841ND_V1_GPIO_LED_QSS_GREEN, + } +}; + +static struct gpio_keys_button tl_wr841n_v1_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR841ND_V1_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "qss", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR841ND_V1_GPIO_BTN_QSS, + .active_low = 1, + } +}; + +static struct dsa_chip_data tl_wr841n_v1_dsa_chip = { + .port_names[0] = "wan", + .port_names[1] = "lan1", + .port_names[2] = "lan2", + .port_names[3] = "lan3", + .port_names[4] = "lan4", + .port_names[5] = "cpu", +}; + +static struct dsa_platform_data tl_wr841n_v1_dsa_data = { + .nr_chips = 1, + .chip = &tl_wr841n_v1_dsa_chip, +}; + +static void __init tl_wr841n_v1_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + + ar71xx_add_device_mdio(0, 0x0); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth0_data.speed = SPEED_100; + ar71xx_eth0_data.duplex = DUPLEX_FULL; + + ar71xx_add_device_eth(0); + ar71xx_add_device_dsa(&ar71xx_eth0_device.dev, &ar71xx_mdio0_device.dev, + &tl_wr841n_v1_dsa_data); + + ar71xx_add_device_m25p80(&tl_wr841n_v1_flash_data); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v1_leds_gpio), + tl_wr841n_v1_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, TL_WR841ND_V1_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_wr841n_v1_gpio_keys), + tl_wr841n_v1_gpio_keys); + + pb42_pci_init(); +} + +MIPS_MACHINE(AR71XX_MACH_TL_WR841N_V1, "TL-WR841N-v1.5", "TP-LINK TL-WR841N v1", + tl_wr841n_v1_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr941nd.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr941nd.c new file mode 100644 index 000000000..14176b87a --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-tl-wr941nd.c @@ -0,0 +1,121 @@ +/* + * TP-LINK TL-WR941ND board support + * + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/platform_device.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-dsa.h" +#include "dev-m25p80.h" +#include "dev-ar9xxx-wmac.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" + +#define TL_WR941ND_GPIO_LED_SYSTEM 2 +#define TL_WR941ND_GPIO_LED_QSS_RED 4 +#define TL_WR941ND_GPIO_LED_QSS_GREEN 5 +#define TL_WR941ND_GPIO_LED_WLAN 9 + +#define TL_WR941ND_GPIO_BTN_RESET 3 +#define TL_WR941ND_GPIO_BTN_QSS 7 + +#define TL_WR941ND_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TL_WR941ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR941ND_KEYS_POLL_INTERVAL) + +static const char *tl_wr941nd_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data tl_wr941nd_flash_data = { + .part_probes = tl_wr941nd_part_probes, +}; + +static struct gpio_led tl_wr941nd_leds_gpio[] __initdata = { + { + .name = "tp-link:green:system", + .gpio = TL_WR941ND_GPIO_LED_SYSTEM, + .active_low = 1, + }, { + .name = "tp-link:red:qss", + .gpio = TL_WR941ND_GPIO_LED_QSS_RED, + }, { + .name = "tp-link:green:qss", + .gpio = TL_WR941ND_GPIO_LED_QSS_GREEN, + }, { + .name = "tp-link:green:wlan", + .gpio = TL_WR941ND_GPIO_LED_WLAN, + .active_low = 1, + } +}; + +static struct gpio_keys_button tl_wr941nd_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TL_WR941ND_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR941ND_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "qss", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = TL_WR941ND_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR941ND_GPIO_BTN_QSS, + .active_low = 1, + } +}; + +static struct dsa_chip_data tl_wr941nd_dsa_chip = { + .port_names[0] = "wan", + .port_names[1] = "lan1", + .port_names[2] = "lan2", + .port_names[3] = "lan3", + .port_names[4] = "lan4", + .port_names[5] = "cpu", +}; + +static struct dsa_platform_data tl_wr941nd_dsa_data = { + .nr_chips = 1, + .chip = &tl_wr941nd_dsa_chip, +}; + +static void __init tl_wr941nd_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + + ar71xx_add_device_mdio(0, 0x0); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth0_data.speed = SPEED_100; + ar71xx_eth0_data.duplex = DUPLEX_FULL; + + ar71xx_add_device_eth(0); + ar71xx_add_device_dsa(&ar71xx_eth0_device.dev, &ar71xx_mdio0_device.dev, + &tl_wr941nd_dsa_data); + + ar71xx_add_device_m25p80(&tl_wr941nd_flash_data); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_leds_gpio), + tl_wr941nd_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, TL_WR941ND_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_wr941nd_gpio_keys), + tl_wr941nd_gpio_keys); + ar9xxx_add_device_wmac(eeprom, mac); +} + +MIPS_MACHINE(AR71XX_MACH_TL_WR941ND, "TL-WR941ND", "TP-LINK TL-WR941ND", + tl_wr941nd_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ubnt.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ubnt.c new file mode 100644 index 000000000..8f1a1355d --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ubnt.c @@ -0,0 +1,357 @@ +/* + * Ubiquiti RouterStation support + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * Copyright (C) 2008 Ubiquiti <support@ubnt.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-ap91-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-pb42-pci.h" +#include "dev-leds-gpio.h" +#include "dev-usb.h" + +#define UBNT_RS_GPIO_LED_RF 2 +#define UBNT_RS_GPIO_SW4 8 + +#define UBNT_LS_SR71_GPIO_LED_D25 0 +#define UBNT_LS_SR71_GPIO_LED_D26 1 +#define UBNT_LS_SR71_GPIO_LED_D24 2 +#define UBNT_LS_SR71_GPIO_LED_D23 4 +#define UBNT_LS_SR71_GPIO_LED_D22 5 +#define UBNT_LS_SR71_GPIO_LED_D27 6 +#define UBNT_LS_SR71_GPIO_LED_D28 7 + +#define UBNT_M_GPIO_LED_L1 0 +#define UBNT_M_GPIO_LED_L2 1 +#define UBNT_M_GPIO_LED_L3 11 +#define UBNT_M_GPIO_LED_L4 7 +#define UBNT_M_GPIO_BTN_RESET 12 + +#define UBNT_KEYS_POLL_INTERVAL 20 /* msecs */ +#define UBNT_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_KEYS_POLL_INTERVAL) + +static struct gpio_led ubnt_rs_leds_gpio[] __initdata = { + { + .name = "ubnt:green:rf", + .gpio = UBNT_RS_GPIO_LED_RF, + .active_low = 0, + } +}; + +static struct gpio_led ubnt_ls_sr71_leds_gpio[] __initdata = { + { + .name = "ubnt:green:d22", + .gpio = UBNT_LS_SR71_GPIO_LED_D22, + .active_low = 0, + }, { + .name = "ubnt:green:d23", + .gpio = UBNT_LS_SR71_GPIO_LED_D23, + .active_low = 0, + }, { + .name = "ubnt:green:d24", + .gpio = UBNT_LS_SR71_GPIO_LED_D24, + .active_low = 0, + }, { + .name = "ubnt:red:d25", + .gpio = UBNT_LS_SR71_GPIO_LED_D25, + .active_low = 0, + }, { + .name = "ubnt:red:d26", + .gpio = UBNT_LS_SR71_GPIO_LED_D26, + .active_low = 0, + }, { + .name = "ubnt:green:d27", + .gpio = UBNT_LS_SR71_GPIO_LED_D27, + .active_low = 0, + }, { + .name = "ubnt:green:d28", + .gpio = UBNT_LS_SR71_GPIO_LED_D28, + .active_low = 0, + } +}; + +static struct gpio_led ubnt_m_leds_gpio[] __initdata = { + { + .name = "ubnt:red:link1", + .gpio = UBNT_M_GPIO_LED_L1, + .active_low = 0, + }, { + .name = "ubnt:orange:link2", + .gpio = UBNT_M_GPIO_LED_L2, + .active_low = 0, + }, { + .name = "ubnt:green:link3", + .gpio = UBNT_M_GPIO_LED_L3, + .active_low = 0, + }, { + .name = "ubnt:green:link4", + .gpio = UBNT_M_GPIO_LED_L4, + .active_low = 0, + } +}; + +static struct gpio_keys_button ubnt_gpio_keys[] __initdata = { + { + .desc = "sw4", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = UBNT_KEYS_DEBOUNCE_INTERVAL, + .gpio = UBNT_RS_GPIO_SW4, + .active_low = 1, + } +}; + +static struct gpio_keys_button ubnt_m_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = UBNT_KEYS_DEBOUNCE_INTERVAL, + .gpio = UBNT_M_GPIO_BTN_RESET, + .active_low = 1, + } +}; + +static const char *ubnt_part_probes[] = { + "RedBoot", + NULL, +}; + +static struct flash_platform_data ubnt_flash_data = { + .part_probes = ubnt_part_probes, +}; + +static void __init ubnt_generic_setup(void) +{ + ar71xx_add_device_m25p80(&ubnt_flash_data); + + ar71xx_register_gpio_keys_polled(-1, UBNT_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ubnt_gpio_keys), + ubnt_gpio_keys); + + pb42_pci_init(); +} + +/* + * There is Secondary MAC address duplicate problem with some UBNT HW batches. + * Do not increase Secondary MAC address by 1 but do workaround + * with 'Locally Administrated' bit. + */ +static void __init ubnt_init_secondary_mac(unsigned char *mac_base) +{ + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac_base, 0); + ar71xx_eth1_data.mac_addr[0] |= 0x02; +} + +#define UBNT_RS_WAN_PHYMASK BIT(20) +#define UBNT_RS_LAN_PHYMASK (BIT(16) | BIT(17) | BIT(18) | BIT(19)) + +static void __init ubnt_rs_setup(void) +{ + ubnt_generic_setup(); + + ar71xx_add_device_mdio(0, ~(UBNT_RS_WAN_PHYMASK | UBNT_RS_LAN_PHYMASK)); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ar71xx_eth0_data.phy_mask = UBNT_RS_WAN_PHYMASK; + + ubnt_init_secondary_mac(ar71xx_mac_base); + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth1_data.speed = SPEED_100; + ar71xx_eth1_data.duplex = DUPLEX_FULL; + + ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + + ar71xx_add_device_usb(); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio), + ubnt_rs_leds_gpio); +} + +MIPS_MACHINE(AR71XX_MACH_UBNT_RS, "UBNT-RS", "Ubiquiti RouterStation", + ubnt_rs_setup); + +#define UBNT_RSPRO_WAN_PHYMASK BIT(4) +#define UBNT_RSPRO_LAN_PHYMASK (BIT(0) | BIT(1) | BIT(2) | BIT(3)) + +static void __init ubnt_rspro_setup(void) +{ + ubnt_generic_setup(); + + ar71xx_add_device_mdio(0, ~(UBNT_RSPRO_WAN_PHYMASK | + UBNT_RSPRO_LAN_PHYMASK)); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth0_data.phy_mask = UBNT_RSPRO_WAN_PHYMASK; + + ubnt_init_secondary_mac(ar71xx_mac_base); + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth1_data.phy_mask = UBNT_RSPRO_LAN_PHYMASK; + ar71xx_eth1_data.speed = SPEED_1000; + ar71xx_eth1_data.duplex = DUPLEX_FULL; + + ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + + ar71xx_add_device_usb(); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio), + ubnt_rs_leds_gpio); +} + +MIPS_MACHINE(AR71XX_MACH_UBNT_RSPRO, "UBNT-RSPRO", "Ubiquiti RouterStation Pro", + ubnt_rspro_setup); + +static void __init ubnt_lsx_setup(void) +{ + ubnt_generic_setup(); +} + +MIPS_MACHINE(AR71XX_MACH_UBNT_LSX, "UBNT-LSX", "Ubiquiti LSX", ubnt_lsx_setup); + +#define UBNT_LSSR71_PHY_MASK BIT(1) + +static void __init ubnt_lssr71_setup(void) +{ + ubnt_generic_setup(); + + ar71xx_add_device_mdio(0, ~UBNT_LSSR71_PHY_MASK); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ar71xx_eth0_data.phy_mask = UBNT_LSSR71_PHY_MASK; + + ar71xx_add_device_eth(0); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_ls_sr71_leds_gpio), + ubnt_ls_sr71_leds_gpio); +} + +MIPS_MACHINE(AR71XX_MACH_UBNT_LSSR71, "UBNT-LS-SR71", "Ubiquiti LS-SR71", + ubnt_lssr71_setup); + +#define UBNT_M_WAN_PHYMASK BIT(4) + +static void __init ubnt_m_setup(void) +{ + u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); + u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + ar71xx_add_device_m25p80(NULL); + + ar71xx_add_device_mdio(0, ~UBNT_M_WAN_PHYMASK); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac1, 0); + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac2, 0); + ar71xx_add_device_eth(0); + + ap91_pci_init(ee, NULL); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_m_leds_gpio), + ubnt_m_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, UBNT_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ubnt_m_gpio_keys), + ubnt_m_gpio_keys); +} + +static void __init ubnt_rocket_m_setup(void) +{ + ubnt_m_setup(); + ar71xx_add_device_usb(); +} + +MIPS_MACHINE(AR71XX_MACH_UBNT_BULLET_M, "UBNT-BM", "Ubiquiti Bullet M", + ubnt_m_setup); +MIPS_MACHINE(AR71XX_MACH_UBNT_ROCKET_M, "UBNT-RM", "Ubiquiti Rocket M", + ubnt_rocket_m_setup); + +/* TODO detect the second ethernet port and use one + init function for all Ubiquiti MIMO series products */ +static void __init ubnt_nano_m_setup(void) +{ + ubnt_m_setup(); + ar71xx_add_device_eth(1); +} + +MIPS_MACHINE(AR71XX_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M", + ubnt_nano_m_setup); + +static struct gpio_led ubnt_airrouter_leds_gpio[] __initdata = { + { + .name = "ubnt:green:globe", + .gpio = 0, + .active_low = 1, + } +}; + +static void __init ubnt_airrouter_setup(void) +{ + u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + ar71xx_add_device_m25p80(NULL); + ar71xx_add_device_mdio(0, ~UBNT_M_WAN_PHYMASK); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac1, 0); + ubnt_init_secondary_mac(mac1); + + ar71xx_add_device_eth(1); + ar71xx_add_device_eth(0); + ar71xx_add_device_usb(); + + ap91_pci_init(ee, NULL); + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_airrouter_leds_gpio), + ubnt_airrouter_leds_gpio); +} + +MIPS_MACHINE(AR71XX_MACH_UBNT_AIRROUTER, "UBNT-AR", "Ubiquiti AirRouter", + ubnt_airrouter_setup); + +static struct gpio_led ubnt_unifi_leds_gpio[] __initdata = { + { + .name = "ubnt:orange:dome", + .gpio = 1, + .active_low = 0, + }, { + .name = "ubnt:green:dome", + .gpio = 0, + .active_low = 0, + } +}; + +static void __init ubnt_unifi_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + ar71xx_add_device_m25p80(NULL); + + ar71xx_add_device_mdio(0, ~UBNT_M_WAN_PHYMASK); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); + ar71xx_add_device_eth(0); + + ap91_pci_init(ee, NULL); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_leds_gpio), + ubnt_unifi_leds_gpio); +} + +MIPS_MACHINE(AR71XX_MACH_UBNT_UNIFI, "UBNT-UF", "Ubiquiti UniFi", + ubnt_unifi_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-whr-hp-g300n.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-whr-hp-g300n.c new file mode 100644 index 000000000..ccc36507d --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-whr-hp-g300n.c @@ -0,0 +1,169 @@ +/* + * Buffalo WHR-HP-G300N board support + * + * based on ... + * + * TP-LINK TL-WR741ND board support + * + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-ap91-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" + +#define WHRHPG300N_GPIO_LED_SECURITY 0 +#define WHRHPG300N_GPIO_LED_DIAG 1 +#define WHRHPG300N_GPIO_LED_ROUTER 6 + +#define WHRHPG300N_GPIO_BTN_ROUTER_ON 7 +#define WHRHPG300N_GPIO_BTN_ROUTER_AUTO 8 +#define WHRHPG300N_GPIO_BTN_RESET 11 +#define WHRHPG300N_GPIO_BTN_AOSS 12 + +#define WHRHPG300N_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WHRHPG300N_KEYS_DEBOUNCE_INTERVAL (3 * WHRHPG300N_KEYS_POLL_INTERVAL) + +#define WHRHPG300N_MAC_OFFSET 0x20c + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition whrhpg300n_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x03e000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x03e000, + .size = 0x002000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = 0x040000, + .size = 0x0e0000, + }, { + .name = "rootfs", + .offset = 0x120000, + .size = 0x2c0000, + }, { + .name = "user_property", + .offset = 0x3e0000, + .size = 0x010000, + }, { + .name = "ART", + .offset = 0x3f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x040000, + .size = 0x3a0000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct flash_platform_data whrhpg300n_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .parts = whrhpg300n_partitions, + .nr_parts = ARRAY_SIZE(whrhpg300n_partitions), +#endif +}; + +static struct gpio_led whrhpg300n_leds_gpio[] __initdata = { + { + .name = "buffalo:orange:security", + .gpio = WHRHPG300N_GPIO_LED_SECURITY, + .active_low = 1, + }, { + .name = "buffalo:red:diag", + .gpio = WHRHPG300N_GPIO_LED_DIAG, + .active_low = 1, + }, { + .name = "buffalo:green:router", + .gpio = WHRHPG300N_GPIO_LED_ROUTER, + .active_low = 1, + } +}; + +static struct gpio_keys_button whrhpg300n_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL, + .gpio = WHRHPG300N_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "aoss/wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .gpio = WHRHPG300N_GPIO_BTN_AOSS, + .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL, + .active_low = 1, + }, { + .desc = "router_on", + .type = EV_KEY, + .code = BTN_2, + .gpio = WHRHPG300N_GPIO_BTN_ROUTER_ON, + .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL, + .active_low = 1, + }, { + .desc = "router_auto", + .type = EV_KEY, + .code = BTN_3, + .gpio = WHRHPG300N_GPIO_BTN_ROUTER_AUTO, + .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL, + .active_low = 1, + } +}; + +static void __init whrhpg300n_setup(void) +{ + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + u8 *mac = (u8 *) KSEG1ADDR(ee + WHRHPG300N_MAC_OFFSET); + + ar71xx_add_device_m25p80(&whrhpg300n_flash_data); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(whrhpg300n_leds_gpio), + whrhpg300n_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, WHRHPG300N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(whrhpg300n_gpio_keys), + whrhpg300n_gpio_keys); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); + + ar71xx_add_device_mdio(0, 0x0); + + /* LAN ports */ + ar71xx_add_device_eth(1); + /* WAN port */ + ar71xx_add_device_eth(0); + + ap91_pci_setup_wmac_led_pin(1); + + ap91_pci_init(ee, mac); +} + +MIPS_MACHINE(AR71XX_MACH_WHR_HP_G300N, "WHR-HP-G300N", "Buffalo WHR-HP-G300N", + whrhpg300n_setup); + +MIPS_MACHINE(AR71XX_MACH_WHR_G301N, "WHR-G301N", "Buffalo WHR-G301N", + whrhpg300n_setup); + +MIPS_MACHINE(AR71XX_MACH_WHR_HP_GN, "WHR-HP-GN", "Buffalo WHR-HP-GN", + whrhpg300n_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wndr3700.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wndr3700.c new file mode 100644 index 000000000..c708b97d9 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wndr3700.c @@ -0,0 +1,178 @@ +/* + * Netgear WNDR3700 board support + * + * Copyright (C) 2009 Marco Porsch + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/delay.h> +#include <linux/rtl8366.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-ap94-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-usb.h" + +#define WNDR3700_GPIO_LED_WPS_ORANGE 0 +#define WNDR3700_GPIO_LED_POWER_ORANGE 1 +#define WNDR3700_GPIO_LED_POWER_GREEN 2 +#define WNDR3700_GPIO_LED_WPS_GREEN 4 +#define WNDR3700_GPIO_LED_WAN_GREEN 6 + +#define WNDR3700_GPIO_BTN_WPS 3 +#define WNDR3700_GPIO_BTN_RESET 8 +#define WNDR3700_GPIO_BTN_WIFI 11 + +#define WNDR3700_GPIO_RTL8366_SDA 5 +#define WNDR3700_GPIO_RTL8366_SCK 7 + +#define WNDR3700_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WNDR3700_KEYS_DEBOUNCE_INTERVAL (3 * WNDR3700_KEYS_POLL_INTERVAL) + +#define WNDR3700_ETH0_MAC_OFFSET 0 +#define WNDR3700_ETH1_MAC_OFFSET 0x6 + +#define WNDR3700_WMAC0_MAC_OFFSET 0 +#define WNDR3700_WMAC1_MAC_OFFSET 0xc +#define WNDR3700_CALDATA0_OFFSET 0x1000 +#define WNDR3700_CALDATA1_OFFSET 0x5000 + +static struct gpio_led wndr3700_leds_gpio[] __initdata = { + { + .name = "wndr3700:green:power", + .gpio = WNDR3700_GPIO_LED_POWER_GREEN, + .active_low = 1, + }, { + .name = "wndr3700:orange:power", + .gpio = WNDR3700_GPIO_LED_POWER_ORANGE, + .active_low = 1, + }, { + .name = "wndr3700:green:wps", + .gpio = WNDR3700_GPIO_LED_WPS_GREEN, + .active_low = 1, + }, { + .name = "wndr3700:orange:wps", + .gpio = WNDR3700_GPIO_LED_WPS_ORANGE, + .active_low = 1, + }, { + .name = "wndr3700:green:wan", + .gpio = WNDR3700_GPIO_LED_WAN_GREEN, + .active_low = 1, + } +}; + +static struct gpio_keys_button wndr3700_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL, + .gpio = WNDR3700_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL, + .gpio = WNDR3700_GPIO_BTN_WPS, + .active_low = 1, + }, { + .desc = "wifi", + .type = EV_KEY, + .code = BTN_2, + .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL, + .gpio = WNDR3700_GPIO_BTN_WIFI, + .active_low = 1, + } +}; + +static struct rtl8366_platform_data wndr3700_rtl8366s_data = { + .gpio_sda = WNDR3700_GPIO_RTL8366_SDA, + .gpio_sck = WNDR3700_GPIO_RTL8366_SCK, +}; + +static struct platform_device wndr3700_rtl8366s_device = { + .name = RTL8366S_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &wndr3700_rtl8366s_data, + } +}; + +/* + * The eth0 and wmac0 interfaces share the same MAC address which + * can lead to problems if operated unbridged. Set the locally + * administered bit on the eth0 MAC to make it unique. + */ + +static void __init wndr3700_init_local_mac(unsigned char *mac_base) +{ + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac_base, 0); + ar71xx_eth0_data.mac_addr[0] |= 0x02; +} + +static void __init wndr3700_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + wndr3700_init_local_mac(art + WNDR3700_ETH0_MAC_OFFSET); + ar71xx_eth0_pll_data.pll_1000 = 0x11110000; + ar71xx_eth0_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev; + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth0_data.speed = SPEED_1000; + ar71xx_eth0_data.duplex = DUPLEX_FULL; + + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, + art + WNDR3700_ETH1_MAC_OFFSET, 0); + ar71xx_eth1_pll_data.pll_1000 = 0x11110000; + ar71xx_eth1_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev; + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth1_data.phy_mask = 0x10; + + ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + + ar71xx_add_device_usb(); + + ar71xx_add_device_m25p80(NULL); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wndr3700_leds_gpio), + wndr3700_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, WNDR3700_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wndr3700_gpio_keys), + wndr3700_gpio_keys); + + platform_device_register(&wndr3700_rtl8366s_device); + platform_device_register_simple("wndr3700-led-usb", -1, NULL, 0); + + ap94_pci_setup_wmac_led_pin(0, 5); + ap94_pci_setup_wmac_led_pin(1, 5); + + /* 2.4 GHz uses the first fixed antenna group (1, 0, 1, 0) */ + ap94_pci_setup_wmac_gpio(0, (0xf << 6), (0xa << 6)); + + /* 5 GHz uses the second fixed antenna group (0, 1, 1, 0) */ + ap94_pci_setup_wmac_gpio(1, (0xf << 6), (0x6 << 6)); + + ap94_pci_init(art + WNDR3700_CALDATA0_OFFSET, + art + WNDR3700_WMAC0_MAC_OFFSET, + art + WNDR3700_CALDATA1_OFFSET, + art + WNDR3700_WMAC1_MAC_OFFSET); +} + +MIPS_MACHINE(AR71XX_MACH_WNDR3700, "WNDR3700", + "NETGEAR WNDR3700/WNDR3800/WNDRMAC", + wndr3700_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wnr2000.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wnr2000.c new file mode 100644 index 000000000..37477eb22 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wnr2000.c @@ -0,0 +1,150 @@ +/* + * NETGEAR WNR2000 board support + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * Copyright (C) 2008-2009 Andy Boyett <agb@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-ar9xxx-wmac.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" + +#define WNR2000_GPIO_LED_PWR_GREEN 14 +#define WNR2000_GPIO_LED_PWR_AMBER 7 +#define WNR2000_GPIO_LED_WPS 4 +#define WNR2000_GPIO_LED_WLAN 6 +#define WNR2000_GPIO_BTN_RESET 21 +#define WNR2000_GPIO_BTN_WPS 8 + +#define WNR2000_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WNR2000_KEYS_DEBOUNCE_INTERVAL (3 * WNR2000_KEYS_POLL_INTERVAL) + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition wnr2000_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x040000, + .size = 0x010000, + }, { + .name = "rootfs", + .offset = 0x050000, + .size = 0x240000, + }, { + .name = "user-config", + .offset = 0x290000, + .size = 0x010000, + }, { + .name = "uImage", + .offset = 0x2a0000, + .size = 0x120000, + }, { + .name = "language_table", + .offset = 0x3c0000, + .size = 0x020000, + }, { + .name = "rootfs_checksum", + .offset = 0x3e0000, + .size = 0x010000, + }, { + .name = "art", + .offset = 0x3f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct flash_platform_data wnr2000_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .parts = wnr2000_partitions, + .nr_parts = ARRAY_SIZE(wnr2000_partitions), +#endif +}; + +static struct gpio_led wnr2000_leds_gpio[] __initdata = { + { + .name = "wnr2000:green:power", + .gpio = WNR2000_GPIO_LED_PWR_GREEN, + .active_low = 1, + }, { + .name = "wnr2000:amber:power", + .gpio = WNR2000_GPIO_LED_PWR_AMBER, + .active_low = 1, + }, { + .name = "wnr2000:green:wps", + .gpio = WNR2000_GPIO_LED_WPS, + .active_low = 1, + }, { + .name = "wnr2000:blue:wlan", + .gpio = WNR2000_GPIO_LED_WLAN, + .active_low = 1, + } +}; + +static struct gpio_keys_button wnr2000_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WNR2000_KEYS_DEBOUNCE_INTERVAL, + .gpio = WNR2000_GPIO_BTN_RESET, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WNR2000_KEYS_DEBOUNCE_INTERVAL, + .gpio = WNR2000_GPIO_BTN_WPS, + } +}; + +static void __init wnr2000_setup(void) +{ + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + + ar71xx_add_device_mdio(0, 0x0); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, eeprom, 0); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth0_data.speed = SPEED_100; + ar71xx_eth0_data.duplex = DUPLEX_FULL; + ar71xx_eth0_data.has_ar8216 = 1; + + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, eeprom, 1); + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth1_data.phy_mask = 0x10; + + ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + + ar71xx_add_device_m25p80(&wnr2000_flash_data); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wnr2000_leds_gpio), + wnr2000_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, WNR2000_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wnr2000_gpio_keys), + wnr2000_gpio_keys); + + + ar9xxx_add_device_wmac(eeprom, NULL); +} + +MIPS_MACHINE(AR71XX_MACH_WNR2000, "WNR2000", "NETGEAR WNR2000", wnr2000_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wp543.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wp543.c new file mode 100644 index 000000000..3eb57119c --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wp543.c @@ -0,0 +1,107 @@ +/* + * Compex WP543/WPJ543 board support + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-pb42-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-usb.h" + +#define WP543_GPIO_SW6 2 +#define WP543_GPIO_LED_1 3 +#define WP543_GPIO_LED_2 4 +#define WP543_GPIO_LED_WLAN 5 +#define WP543_GPIO_LED_CONN 6 +#define WP543_GPIO_LED_DIAG 7 +#define WP543_GPIO_SW4 8 + +#define WP543_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WP543_KEYS_DEBOUNCE_INTERVAL (3 * WP543_KEYS_POLL_INTERVAL) + +static struct gpio_led wp543_leds_gpio[] __initdata = { + { + .name = "wp543:green:led1", + .gpio = WP543_GPIO_LED_1, + .active_low = 1, + }, { + .name = "wp543:green:led2", + .gpio = WP543_GPIO_LED_2, + .active_low = 1, + }, { + .name = "wp543:green:wlan", + .gpio = WP543_GPIO_LED_WLAN, + .active_low = 1, + }, { + .name = "wp543:green:conn", + .gpio = WP543_GPIO_LED_CONN, + .active_low = 1, + }, { + .name = "wp543:green:diag", + .gpio = WP543_GPIO_LED_DIAG, + .active_low = 1, + } +}; + +static struct gpio_keys_button wp543_gpio_keys[] __initdata = { + { + .desc = "sw6", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = WP543_KEYS_DEBOUNCE_INTERVAL, + .gpio = WP543_GPIO_SW6, + }, { + .desc = "sw4", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = WP543_KEYS_DEBOUNCE_INTERVAL, + .gpio = WP543_GPIO_SW4, + } +}; + +static const char *wp543_part_probes[] = { + "MyLoader", + NULL, +}; + +static struct flash_platform_data wp543_flash_data = { + .part_probes = wp543_part_probes, +}; + +static void __init wp543_setup(void) +{ + ar71xx_add_device_m25p80(&wp543_flash_data); + + ar71xx_add_device_mdio(0, 0xfffffff0); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ar71xx_eth0_data.phy_mask = 0x0f; + ar71xx_eth0_data.reset_bit = RESET_MODULE_GE0_MAC | + RESET_MODULE_GE0_PHY; + ar71xx_add_device_eth(0); + + ar71xx_add_device_usb(); + + pb42_pci_init(); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wp543_leds_gpio), + wp543_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, WP543_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wp543_gpio_keys), + wp543_gpio_keys); +} + +MIPS_MACHINE(AR71XX_MACH_WP543, "WP543", "Compex WP543", wp543_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wrt160nl.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wrt160nl.c new file mode 100644 index 000000000..0cc560a40 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wrt160nl.c @@ -0,0 +1,127 @@ +/* + * Linksys WRT160NL board support + * + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-ar9xxx-wmac.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-usb.h" +#include "nvram.h" + +#define WRT160NL_GPIO_LED_POWER 14 +#define WRT160NL_GPIO_LED_WPS_AMBER 9 +#define WRT160NL_GPIO_LED_WPS_BLUE 8 +#define WRT160NL_GPIO_LED_WLAN 6 + +#define WRT160NL_GPIO_BTN_WPS 7 +#define WRT160NL_GPIO_BTN_RESET 21 + +#define WRT160NL_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WRT160NL_KEYS_DEBOUNCE_INTERVAL (3 * WRT160NL_KEYS_POLL_INTERVAL) + +#define WRT160NL_NVRAM_ADDR 0x1f7e0000 +#define WRT160NL_NVRAM_SIZE 0x10000 + +static const char *wrt160nl_part_probes[] = { + "wrt160nl", + NULL, +}; + +static struct flash_platform_data wrt160nl_flash_data = { + .part_probes = wrt160nl_part_probes, +}; + +static struct gpio_led wrt160nl_leds_gpio[] __initdata = { + { + .name = "wrt160nl:blue:power", + .gpio = WRT160NL_GPIO_LED_POWER, + .active_low = 1, + .default_trigger = "default-on", + }, { + .name = "wrt160nl:amber:wps", + .gpio = WRT160NL_GPIO_LED_WPS_AMBER, + .active_low = 1, + }, { + .name = "wrt160nl:blue:wps", + .gpio = WRT160NL_GPIO_LED_WPS_BLUE, + .active_low = 1, + }, { + .name = "wrt160nl:blue:wlan", + .gpio = WRT160NL_GPIO_LED_WLAN, + .active_low = 1, + } +}; + +static struct gpio_keys_button wrt160nl_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WRT160NL_KEYS_DEBOUNCE_INTERVAL, + .gpio = WRT160NL_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WRT160NL_KEYS_DEBOUNCE_INTERVAL, + .gpio = WRT160NL_GPIO_BTN_WPS, + .active_low = 1, + } +}; + +static void __init wrt160nl_setup(void) +{ + const char *nvram = (char *) KSEG1ADDR(WRT160NL_NVRAM_ADDR); + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + u8 mac[6]; + + if (nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE, + "lan_hwaddr=", mac) == 0) { + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); + } + + ar71xx_add_device_mdio(0, 0x0); + + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth0_data.phy_mask = 0x01; + + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth1_data.phy_mask = 0x10; + + ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + + ar71xx_add_device_m25p80(&wrt160nl_flash_data); + + ar71xx_add_device_usb(); + + if (nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE, + "wl0_hwaddr=", mac) == 0) + ar9xxx_add_device_wmac(eeprom, mac); + else + ar9xxx_add_device_wmac(eeprom, NULL); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wrt160nl_leds_gpio), + wrt160nl_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, WRT160NL_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wrt160nl_gpio_keys), + wrt160nl_gpio_keys); + +} + +MIPS_MACHINE(AR71XX_MACH_WRT160NL, "WRT160NL", "Linksys WRT160NL", + wrt160nl_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wrt400n.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wrt400n.c new file mode 100644 index 000000000..6d8d55faf --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wrt400n.c @@ -0,0 +1,165 @@ +/* + * Linksys WRT400N board support + * + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-ap94-pci.h" +#include "dev-m25p80.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" + +#define WRT400N_GPIO_LED_POWER 1 +#define WRT400N_GPIO_LED_WPS_BLUE 4 +#define WRT400N_GPIO_LED_WPS_AMBER 5 +#define WRT400N_GPIO_LED_WLAN 6 + +#define WRT400N_GPIO_BTN_RESET 8 +#define WRT400N_GPIO_BTN_WLSEC 3 + +#define WRT400N_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WRT400N_KEYS_DEBOUNE_INTERVAL (3 * WRT400N_KEYS_POLL_INTERVAL) + +#define WRT400N_MAC_ADDR_OFFSET 0x120c +#define WRT400N_CALDATA0_OFFSET 0x1000 +#define WRT400N_CALDATA1_OFFSET 0x5000 + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition wrt400n_partitions[] = { + { + .name = "uboot", + .offset = 0, + .size = 0x030000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "env", + .offset = 0x030000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "linux", + .offset = 0x040000, + .size = 0x140000, + }, { + .name = "rootfs", + .offset = 0x180000, + .size = 0x630000, + }, { + .name = "nvram", + .offset = 0x7b0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "factory", + .offset = 0x7c0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "language", + .offset = 0x7d0000, + .size = 0x020000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "caldata", + .offset = 0x7f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x040000, + .size = 0x770000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct flash_platform_data wrt400n_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .parts = wrt400n_partitions, + .nr_parts = ARRAY_SIZE(wrt400n_partitions), +#endif +}; + +static struct gpio_led wrt400n_leds_gpio[] __initdata = { + { + .name = "wrt400n:blue:wps", + .gpio = WRT400N_GPIO_LED_WPS_BLUE, + .active_low = 1, + }, { + .name = "wrt400n:amber:wps", + .gpio = WRT400N_GPIO_LED_WPS_AMBER, + .active_low = 1, + }, { + .name = "wrt400n:blue:wlan", + .gpio = WRT400N_GPIO_LED_WLAN, + .active_low = 1, + }, { + .name = "wrt400n:blue:power", + .gpio = WRT400N_GPIO_LED_POWER, + .active_low = 0, + .default_trigger = "default-on", + } +}; + +static struct gpio_keys_button wrt400n_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WRT400N_KEYS_DEBOUNE_INTERVAL, + .gpio = WRT400N_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wlsec", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WRT400N_KEYS_DEBOUNE_INTERVAL, + .gpio = WRT400N_GPIO_BTN_WLSEC, + .active_low = 1, + } +}; + +static void __init wrt400n_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + u8 *mac = art + WRT400N_MAC_ADDR_OFFSET; + + ar71xx_add_device_mdio(0, 0x0); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 1); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth0_data.speed = SPEED_100; + ar71xx_eth0_data.duplex = DUPLEX_FULL; + + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 2); + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth1_data.phy_mask = 0x10; + + ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + + ar71xx_add_device_m25p80(&wrt400n_flash_data); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wrt400n_leds_gpio), + wrt400n_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, WRT400N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wrt400n_gpio_keys), + wrt400n_gpio_keys); + + ap94_pci_init(art + WRT400N_CALDATA0_OFFSET, NULL, + art + WRT400N_CALDATA1_OFFSET, NULL); +} + +MIPS_MACHINE(AR71XX_MACH_WRT400N, "WRT400N", "Linksys WRT400N", wrt400n_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-ag300h.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-ag300h.c new file mode 100644 index 000000000..d4ba62c84 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-ag300h.c @@ -0,0 +1,166 @@ +/* + * Buffalo WZR-HP-AG300H board support + * + * Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mips_machine.h> +#include <asm/mach-ar71xx/ar71xx.h> +#include <asm/mach-ar71xx/gpio.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-ap94-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" + +#define WZRHPAG300H_MAC_OFFSET 0x20c +#define WZRHPAG300H_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPAG300H_KEYS_POLL_INTERVAL) + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition wzrhpag300h_flash_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x0040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x0040000, + .size = 0x0010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "art", + .offset = 0x0050000, + .size = 0x0010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = 0x0060000, + .size = 0x0100000, + }, { + .name = "rootfs", + .offset = 0x0160000, + .size = 0x1e90000, + }, { + .name = "user_property", + .offset = 0x1ff0000, + .size = 0x0010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x0060000, + .size = 0x1f90000, + } +}; + +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct flash_platform_data wzrhpag300h_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .parts = wzrhpag300h_flash_partitions, + .nr_parts = ARRAY_SIZE(wzrhpag300h_flash_partitions), +#endif +}; + +static struct gpio_led wzrhpag300h_leds_gpio[] __initdata = { + { + .name = "buffalo:red:diag", + .gpio = 1, + .active_low = 1, + }, +}; + + +static struct gpio_keys_button wzrhpag300h_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, + .gpio = 11, + .active_low = 1, + }, { + .desc = "usb", + .type = EV_KEY, + .code = BTN_2, + .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, + .gpio = 3, + .active_low = 1, + }, { + .desc = "aoss", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, + .gpio = 5, + .active_low = 1, + }, { + .desc = "router_auto", + .type = EV_KEY, + .code = BTN_6, + .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, + .gpio = 6, + .active_low = 1, + }, { + .desc = "router_off", + .type = EV_KEY, + .code = BTN_5, + .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, + .gpio = 7, + .active_low = 1, + } +}; + +static void __init wzrhpag300h_setup(void) +{ + u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1f051000); + u8 *eeprom2 = (u8 *) KSEG1ADDR(0x1f055000); + u8 *mac1 = eeprom1 + WZRHPAG300H_MAC_OFFSET; + u8 *mac2 = eeprom2 + WZRHPAG300H_MAC_OFFSET; + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac1, 0); + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac2, 1); + + ar71xx_add_device_mdio(0, ~(BIT(0) | BIT(4))); + + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth0_data.speed = SPEED_1000; + ar71xx_eth0_data.duplex = DUPLEX_FULL; + ar71xx_eth0_data.phy_mask = BIT(0); + + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth1_data.phy_mask = BIT(4); + + ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + + ar71xx_add_device_usb(); + gpio_request(2, "usb"); + gpio_direction_output(2, 1); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wzrhpag300h_leds_gpio), + wzrhpag300h_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, WZRHPAG300H_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wzrhpag300h_gpio_keys), + wzrhpag300h_gpio_keys); + + ar71xx_add_device_m25p80_multi(&wzrhpag300h_flash_data); + + ap94_pci_init(eeprom1, mac1, eeprom2, mac2); +} + +MIPS_MACHINE(AR71XX_MACH_WZR_HP_AG300H, "WZR-HP-AG300H", + "Buffalo WZR-HP-AG300H", wzrhpag300h_setup); + diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-g300nh.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-g300nh.c new file mode 100644 index 000000000..2eb742e4a --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-g300nh.c @@ -0,0 +1,292 @@ +/* + * Buffalo WZR-HP-G300NH board support + * + * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/nxp_74hc153.h> +#include <linux/rtl8366.h> + +#include <asm/mips_machine.h> +#include <asm/mach-ar71xx/ar71xx.h> +#include <asm/mach-ar71xx/ar91xx_flash.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-ar9xxx-wmac.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-usb.h" + +#define WZRHPG300NH_GPIO_LED_USB 0 +#define WZRHPG300NH_GPIO_LED_DIAG 1 +#define WZRHPG300NH_GPIO_LED_WIRELESS 6 +#define WZRHPG300NH_GPIO_LED_SECURITY 17 +#define WZRHPG300NH_GPIO_LED_ROUTER 18 + +#define WZRHPG300NH_GPIO_RTL8366_SDA 19 +#define WZRHPG300NH_GPIO_RTL8366_SCK 20 + +#define WZRHPG300NH_GPIO_74HC153_S0 9 +#define WZRHPG300NH_GPIO_74HC153_S1 11 +#define WZRHPG300NH_GPIO_74HC153_1Y 12 +#define WZRHPG300NH_GPIO_74HC153_2Y 14 + +#define WZRHPG300NH_GPIO_EXP_BASE 32 +#define WZRHPG300NH_GPIO_BTN_AOSS (WZRHPG300NH_GPIO_EXP_BASE + 0) +#define WZRHPG300NH_GPIO_BTN_RESET (WZRHPG300NH_GPIO_EXP_BASE + 1) +#define WZRHPG300NH_GPIO_BTN_ROUTER_ON (WZRHPG300NH_GPIO_EXP_BASE + 2) +#define WZRHPG300NH_GPIO_BTN_QOS_ON (WZRHPG300NH_GPIO_EXP_BASE + 3) +#define WZRHPG300NH_GPIO_BTN_USB (WZRHPG300NH_GPIO_EXP_BASE + 5) +#define WZRHPG300NH_GPIO_BTN_ROUTER_AUTO (WZRHPG300NH_GPIO_EXP_BASE + 6) +#define WZRHPG300NH_GPIO_BTN_QOS_OFF (WZRHPG300NH_GPIO_EXP_BASE + 7) + +#define WZRHPG300NH_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH_KEYS_POLL_INTERVAL) + +#define WZRHPG300NH_MAC_OFFSET 0x20c + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition wzrhpg300nh_flash_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x0040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x0040000, + .size = 0x0020000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = 0x0060000, + .size = 0x0100000, + }, { + .name = "rootfs", + .offset = 0x0160000, + .size = 0x1e60000, + }, { + .name = "user_property", + .offset = 0x1fc0000, + .size = 0x0020000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "art", + .offset = 0x1fe0000, + .size = 0x0020000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x0060000, + .size = 0x1f60000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct ar91xx_flash_platform_data wzrhpg300nh_flash_data = { + .width = 2, +#ifdef CONFIG_MTD_PARTITIONS + .parts = wzrhpg300nh_flash_partitions, + .nr_parts = ARRAY_SIZE(wzrhpg300nh_flash_partitions), +#endif +}; + +#define WZRHPG300NH_FLASH_BASE 0x1e000000 +#define WZRHPG300NH_FLASH_SIZE (32 * 1024 * 1024) + +static struct resource wzrhpg300nh_flash_resources[] = { + [0] = { + .start = WZRHPG300NH_FLASH_BASE, + .end = WZRHPG300NH_FLASH_BASE + WZRHPG300NH_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device wzrhpg300nh_flash_device = { + .name = "ar91xx-flash", + .id = -1, + .resource = wzrhpg300nh_flash_resources, + .num_resources = ARRAY_SIZE(wzrhpg300nh_flash_resources), + .dev = { + .platform_data = &wzrhpg300nh_flash_data, + } +}; + +static struct gpio_led wzrhpg300nh_leds_gpio[] __initdata = { + { + .name = "buffalo:orange:security", + .gpio = WZRHPG300NH_GPIO_LED_SECURITY, + .active_low = 1, + }, { + .name = "buffalo:green:wireless", + .gpio = WZRHPG300NH_GPIO_LED_WIRELESS, + .active_low = 1, + }, { + .name = "buffalo:green:router", + .gpio = WZRHPG300NH_GPIO_LED_ROUTER, + .active_low = 1, + }, { + .name = "buffalo:red:diag", + .gpio = WZRHPG300NH_GPIO_LED_DIAG, + .active_low = 1, + }, { + .name = "buffalo:blue:usb", + .gpio = WZRHPG300NH_GPIO_LED_USB, + .active_low = 1, + } +}; + +static struct gpio_keys_button wzrhpg300nh_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, + .gpio = WZRHPG300NH_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "aoss", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, + .gpio = WZRHPG300NH_GPIO_BTN_AOSS, + .active_low = 1, + }, { + .desc = "usb", + .type = EV_KEY, + .code = BTN_2, + .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, + .gpio = WZRHPG300NH_GPIO_BTN_USB, + .active_low = 1, + }, { + .desc = "qos_on", + .type = EV_KEY, + .code = BTN_3, + .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, + .gpio = WZRHPG300NH_GPIO_BTN_QOS_ON, + .active_low = 0, + }, { + .desc = "qos_off", + .type = EV_KEY, + .code = BTN_4, + .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, + .gpio = WZRHPG300NH_GPIO_BTN_QOS_OFF, + .active_low = 0, + }, { + .desc = "router_on", + .type = EV_KEY, + .code = BTN_5, + .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, + .gpio = WZRHPG300NH_GPIO_BTN_ROUTER_ON, + .active_low = 0, + }, { + .desc = "router_auto", + .type = EV_KEY, + .code = BTN_6, + .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, + .gpio = WZRHPG300NH_GPIO_BTN_ROUTER_AUTO, + .active_low = 0, + } +}; + +static struct nxp_74hc153_platform_data wzrhpg300nh_74hc153_data = { + .gpio_base = WZRHPG300NH_GPIO_EXP_BASE, + .gpio_pin_s0 = WZRHPG300NH_GPIO_74HC153_S0, + .gpio_pin_s1 = WZRHPG300NH_GPIO_74HC153_S1, + .gpio_pin_1y = WZRHPG300NH_GPIO_74HC153_1Y, + .gpio_pin_2y = WZRHPG300NH_GPIO_74HC153_2Y, +}; + +static struct platform_device wzrhpg300nh_74hc153_device = { + .name = NXP_74HC153_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &wzrhpg300nh_74hc153_data, + } +}; + +static struct rtl8366_platform_data wzrhpg300nh_rtl8366_data = { + .gpio_sda = WZRHPG300NH_GPIO_RTL8366_SDA, + .gpio_sck = WZRHPG300NH_GPIO_RTL8366_SCK, +}; + +static struct platform_device wzrhpg300nh_rtl8366s_device = { + .name = RTL8366S_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &wzrhpg300nh_rtl8366_data, + } +}; + +static struct platform_device wzrhpg300nh_rtl8366rb_device = { + .name = RTL8366RB_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &wzrhpg300nh_rtl8366_data, + } +}; + +static void __init wzrhpg300nh_setup(void) +{ + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + u8 *mac = eeprom + WZRHPG300NH_MAC_OFFSET; + bool hasrtl8366rb = false; + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); + + if (rtl8366_smi_detect(&wzrhpg300nh_rtl8366_data) == RTL8366_TYPE_RB) + hasrtl8366rb = true; + + if (hasrtl8366rb) { + ar71xx_eth0_pll_data.pll_1000 = 0x1f000000; + ar71xx_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366rb_device.dev; + ar71xx_eth1_pll_data.pll_1000 = 0x100; + ar71xx_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366rb_device.dev; + } else { + ar71xx_eth0_pll_data.pll_1000 = 0x1e000100; + ar71xx_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev; + ar71xx_eth1_pll_data.pll_1000 = 0x1e000100; + ar71xx_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev; + } + + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth0_data.speed = SPEED_1000; + ar71xx_eth0_data.duplex = DUPLEX_FULL; + + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth1_data.phy_mask = 0x10; + + ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + + ar71xx_add_device_usb(); + ar9xxx_add_device_wmac(eeprom, NULL); + + platform_device_register(&wzrhpg300nh_74hc153_device); + platform_device_register(&wzrhpg300nh_flash_device); + + if (hasrtl8366rb) + platform_device_register(&wzrhpg300nh_rtl8366rb_device); + else + platform_device_register(&wzrhpg300nh_rtl8366s_device); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh_leds_gpio), + wzrhpg300nh_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, WZRHPG300NH_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wzrhpg300nh_gpio_keys), + wzrhpg300nh_gpio_keys); + +} + +MIPS_MACHINE(AR71XX_MACH_WZR_HP_G300NH, "WZR-HP-G300NH", + "Buffalo WZR-HP-G300NH", wzrhpg300nh_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-g300nh2.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-g300nh2.c new file mode 100644 index 000000000..ad1a0338b --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-g300nh2.c @@ -0,0 +1,190 @@ +/* + * Buffalo WZR-HP-G300NH2 board support + * + * Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org> + * Copyright (C) 2011 Mark Deneen <mdeneen@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mips_machine.h> +#include <asm/mach-ar71xx/ar71xx.h> +#include <asm/mach-ar71xx/gpio.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-ap91-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" + + +#define WZRHPG300NH2_MAC_OFFSET 0x20c +#define WZRHPG300NH2_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH2_KEYS_POLL_INTERVAL) + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition wzrhpg300nh2_flash_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x0040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x0040000, + .size = 0x0010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "art", + .offset = 0x0050000, + .size = 0x0010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = 0x0060000, + .size = 0x0100000, + }, { + .name = "rootfs", + .offset = 0x0160000, + .size = 0x1e90000, + }, { + .name = "user_property", + .offset = 0x1ff0000, + .size = 0x0010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x0060000, + .size = 0x1f90000, + } +}; + +#endif /* CONFIG_MTD_PARTITIONS */ + + + +static struct flash_platform_data wzrhpg300nh2_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .parts = wzrhpg300nh2_flash_partitions, + .nr_parts = ARRAY_SIZE(wzrhpg300nh2_flash_partitions), +#endif +}; + + +static struct gpio_led wzrhpg300nh2_leds_gpio[] __initdata = { + { + .name = "buffalo:red:diag", + .gpio = 16, + .active_low = 1, + }, +}; + +static struct gpio_led wzrhpg300nh2_wmac_leds_gpio[] = { + { + .name = "buffalo:blue:usb", + .gpio = 4, + .active_low = 1, + }, + { + .name = "buffalo:orange:security", + .gpio = 6, + .active_low = 1, + }, + { + .name = "buffalo:green:router", + .gpio = 7, + .active_low = 1, + }, + { + .name = "buffalo:blue:movie_engine_on", + .gpio = 8, + .active_low = 1, + }, + { + .name = "buffalo:blue:movie_engine_off", + .gpio = 9, + .active_low = 1, + }, +}; + +/* The AOSS button is wmac gpio 12 */ +static struct gpio_keys_button wzrhpg300nh2_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL, + .gpio = 1, + .active_low = 1, + }, { + .desc = "usb", + .type = EV_KEY, + .code = BTN_2, + .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL, + .gpio = 7, + .active_low = 1, + }, { + .desc = "qos", + .type = EV_KEY, + .code = BTN_3, + .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL, + .gpio = 11, + .active_low = 0, + }, { + .desc = "router_on", + .type = EV_KEY, + .code = BTN_5, + .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL, + .gpio = 8, + .active_low = 0, + }, +}; + + +static void __init wzrhpg300nh2_setup(void) +{ + + u8 *eeprom = (u8 *) KSEG1ADDR(0x1f051000); + u8 *mac0 = eeprom + WZRHPG300NH2_MAC_OFFSET; + /* There is an eth1 but it is not connected to the switch */ + + ar71xx_add_device_m25p80_multi(&wzrhpg300nh2_flash_data); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac0, 0); + ar71xx_add_device_mdio(0, ~(BIT(0))); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac0, 0); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth0_data.speed = SPEED_1000; + ar71xx_eth0_data.duplex = DUPLEX_FULL; + ar71xx_eth0_data.phy_mask = BIT(0); + + ar71xx_add_device_eth(0); + ar71xx_add_device_usb(); + /* gpio13 is usb power. Turn it on. */ + gpio_request(13, "usb"); + gpio_direction_output(13, 1); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh2_leds_gpio), + wzrhpg300nh2_leds_gpio); + ar71xx_register_gpio_keys_polled(-1, WZRHPG300NH2_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wzrhpg300nh2_gpio_keys), + wzrhpg300nh2_gpio_keys); + ap91_pci_setup_wmac_led_pin(5); + ap91_pci_setup_wmac_leds(wzrhpg300nh2_wmac_leds_gpio, + ARRAY_SIZE(wzrhpg300nh2_wmac_leds_gpio)); + + ap91_pci_init(eeprom, mac0); +} + +MIPS_MACHINE(AR71XX_MACH_WZR_HP_G300NH2, "WZR-HP-G300NH2", + "Buffalo WZR-HP-G300NH2", wzrhpg300nh2_setup); + diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-g450h.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-g450h.c new file mode 100644 index 000000000..03376bb92 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-g450h.c @@ -0,0 +1,173 @@ +/* + * Buffalo WZR-HP-G450G board support + * + * Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org> + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <asm/mach-ar71xx/ar71xx.h> +#include <asm/mach-ar71xx/gpio.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-ap91-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-usb.h" + +#define WZRHPG450H_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WZRHPG450H_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG450H_KEYS_POLL_INTERVAL) + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition wzrhpg450h_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x0040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x0040000, + .size = 0x0010000, + }, { + .name = "ART", + .offset = 0x0050000, + .size = 0x0010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "uImage", + .offset = 0x0060000, + .size = 0x0100000, + }, { + .name = "rootfs", + .offset = 0x0160000, + .size = 0x1e80000, + }, { + .name = "user_property", + .offset = 0x1fe0000, + .size = 0x0020000, + }, { + .name = "firmware", + .offset = 0x0060000, + .size = 0x1f80000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct flash_platform_data wzrhpg450h_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .parts = wzrhpg450h_partitions, + .nr_parts = ARRAY_SIZE(wzrhpg450h_partitions), +#endif +}; + +static struct gpio_led wzrhpg450h_leds_gpio[] __initdata = { + { + .name = "buffalo:red:diag", + .gpio = 14, + .active_low = 1, + }, + { + .name = "buffalo:orange:security", + .gpio = 13, + .active_low = 1, + }, +}; + + +static struct gpio_led wzrhpg450h_wmac_leds_gpio[] = { + { + .name = "buffalo:blue:movie_engine", + .gpio = 13, + .active_low = 1, + }, + { + .name = "buffalo:green:router", + .gpio = 14, + .active_low = 1, + }, +}; + +static struct gpio_keys_button wzrhpg450h_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL, + .gpio = 6, + .active_low = 1, + }, { + .desc = "usb", + .type = EV_KEY, + .code = BTN_2, + .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL, + .gpio = 1, + .active_low = 1, + }, { + .desc = "aoss", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL, + .gpio = 8, + .active_low = 1, + }, { + .desc = "movie_engine", + .type = EV_KEY, + .code = BTN_6, + .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL, + .gpio = 7, + .active_low = 0, + }, { + .desc = "router_off", + .type = EV_KEY, + .code = BTN_5, + .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL, + .gpio = 12, + .active_low = 0, + } +}; + + +static void __init wzrhpg450h_init(void) +{ + u8 *ee = (u8 *) KSEG1ADDR(0x1f051000); + u8 *mac = (u8 *) ee + 2; + + ar71xx_add_device_m25p80_multi(&wzrhpg450h_flash_data); + + ar71xx_add_device_mdio(0, ~BIT(0)); + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth0_data.speed = SPEED_1000; + ar71xx_eth0_data.duplex = DUPLEX_FULL; + ar71xx_eth0_data.phy_mask = BIT(0); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wzrhpg450h_leds_gpio), + wzrhpg450h_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, WZRHPG450H_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wzrhpg450h_gpio_keys), + wzrhpg450h_gpio_keys); + + ar71xx_add_device_eth(0); + + ar71xx_add_device_usb(); + gpio_request(16, "usb"); + gpio_direction_output(16, 1); + + ap91_pci_init(ee, NULL); + ap91_pci_setup_wmac_led_pin(15); + ap91_pci_setup_wmac_leds(wzrhpg450h_wmac_leds_gpio, + ARRAY_SIZE(wzrhpg450h_wmac_leds_gpio)); +} + +MIPS_MACHINE(AR71XX_MACH_WZR_HP_G450H, "WZR-HP-G450H", "Buffalo WZR-HP-G450H", + wzrhpg450h_init); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-zcn-1523h.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-zcn-1523h.c new file mode 100644 index 000000000..7828b37f5 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-zcn-1523h.c @@ -0,0 +1,208 @@ +/* + * Zcomax ZCN-1523H-2-8/5-16 board support + * + * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-ap91-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" + +#define ZCN_1523H_GPIO_BTN_RESET 0 +#define ZCN_1523H_GPIO_LED_INIT 11 +#define ZCN_1523H_GPIO_LED_LAN1 17 + +#define ZCN_1523H_2_GPIO_LED_WEAK 13 +#define ZCN_1523H_2_GPIO_LED_MEDIUM 14 +#define ZCN_1523H_2_GPIO_LED_STRONG 15 + +#define ZCN_1523H_5_GPIO_LED_UNKNOWN 1 +#define ZCN_1523H_5_GPIO_LED_LAN2 13 +#define ZCN_1523H_5_GPIO_LED_WEAK 14 +#define ZCN_1523H_5_GPIO_LED_MEDIUM 15 +#define ZCN_1523H_5_GPIO_LED_STRONG 16 + +#define ZCN_1523H_KEYS_POLL_INTERVAL 20 /* msecs */ +#define ZCN_1523H_KEYS_DEBOUNCE_INTERVAL (3 * ZCN_1523H_KEYS_POLL_INTERVAL) + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition zcn_1523h_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x040000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "rootfs", + .offset = 0x050000, + .size = 0x610000, + }, { + .name = "kernel", + .offset = 0x660000, + .size = 0x170000, + }, { + .name = "configure", + .offset = 0x7d0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "mfg", + .offset = 0x7e0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "eeprom", + .offset = 0x7f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x050000, + .size = 0x780000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct flash_platform_data zcn_1523h_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .parts = zcn_1523h_partitions, + .nr_parts = ARRAY_SIZE(zcn_1523h_partitions), +#endif +}; + +static struct gpio_keys_button zcn_1523h_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = ZCN_1523H_KEYS_DEBOUNCE_INTERVAL, + .gpio = ZCN_1523H_GPIO_BTN_RESET, + .active_low = 1, + } +}; + +static struct gpio_led zcn_1523h_leds_gpio[] __initdata = { + { + .name = "zcn-1523h:amber:init", + .gpio = ZCN_1523H_GPIO_LED_INIT, + .active_low = 1, + }, { + .name = "zcn-1523h:green:lan1", + .gpio = ZCN_1523H_GPIO_LED_LAN1, + .active_low = 1, + } +}; + +static struct gpio_led zcn_1523h_2_leds_gpio[] __initdata = { + { + .name = "zcn-1523h:red:weak", + .gpio = ZCN_1523H_2_GPIO_LED_WEAK, + .active_low = 1, + }, { + .name = "zcn-1523h:amber:medium", + .gpio = ZCN_1523H_2_GPIO_LED_MEDIUM, + .active_low = 1, + }, { + .name = "zcn-1523h:green:strong", + .gpio = ZCN_1523H_2_GPIO_LED_STRONG, + .active_low = 1, + } +}; + +static struct gpio_led zcn_1523h_5_leds_gpio[] __initdata = { + { + .name = "zcn-1523h:red:weak", + .gpio = ZCN_1523H_5_GPIO_LED_WEAK, + .active_low = 1, + }, { + .name = "zcn-1523h:amber:medium", + .gpio = ZCN_1523H_5_GPIO_LED_MEDIUM, + .active_low = 1, + }, { + .name = "zcn-1523h:green:strong", + .gpio = ZCN_1523H_5_GPIO_LED_STRONG, + .active_low = 1, + }, { + .name = "zcn-1523h:green:lan2", + .gpio = ZCN_1523H_5_GPIO_LED_LAN2, + .active_low = 1, + }, { + .name = "zcn-1523h:amber:unknown", + .gpio = ZCN_1523H_5_GPIO_LED_UNKNOWN, + } +}; + +static void __init zcn_1523h_generic_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f7e0004); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + ar71xx_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); + + ar71xx_add_device_m25p80(&zcn_1523h_flash_data); + + ar71xx_add_device_leds_gpio(0, ARRAY_SIZE(zcn_1523h_leds_gpio), + zcn_1523h_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, ZCN_1523H_KEYS_POLL_INTERVAL, + ARRAY_SIZE(zcn_1523h_gpio_keys), + zcn_1523h_gpio_keys); + + ap91_pci_init(ee, mac); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); + + ar71xx_add_device_mdio(0, 0x0); + + /* LAN1 port */ + ar71xx_add_device_eth(0); +} + +static void __init zcn_1523h_2_setup(void) +{ + zcn_1523h_generic_setup(); + ap91_pci_setup_wmac_gpio(BIT(9), 0); + + ar71xx_add_device_leds_gpio(1, ARRAY_SIZE(zcn_1523h_2_leds_gpio), + zcn_1523h_2_leds_gpio); +} + +MIPS_MACHINE(AR71XX_MACH_ZCN_1523H_2, "ZCN-1523H-2", "Zcomax ZCN-1523H-2", + zcn_1523h_2_setup); + +static void __init zcn_1523h_5_setup(void) +{ + zcn_1523h_generic_setup(); + ap91_pci_setup_wmac_gpio(BIT(8), 0); + + ar71xx_add_device_leds_gpio(1, ARRAY_SIZE(zcn_1523h_5_leds_gpio), + zcn_1523h_5_leds_gpio); + + /* LAN2 port */ + ar71xx_add_device_eth(1); +} + +MIPS_MACHINE(AR71XX_MACH_ZCN_1523H_5, "ZCN-1523H-5", "Zcomax ZCN-1523H-5", + zcn_1523h_5_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/machtype.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/machtype.h new file mode 100644 index 000000000..a66046a90 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/machtype.h @@ -0,0 +1,92 @@ +/* + * Atheros AR71xx machine type definitions + * + * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _AR71XX_MACHTYPE_H +#define _AR71XX_MACHTYPE_H + +#include <asm/mips_machine.h> + +enum ar71xx_mach_type { + AR71XX_MACH_GENERIC = 0, + AR71XX_MACH_ALFA_AP96, /* ALFA Network AP96 board */ + AR71XX_MACH_ALFA_NX, /* ALFA Network N2/N5 board */ + AR71XX_MACH_ALL0258N, /* Allnet ALL0258N */ + AR71XX_MACH_AP121, /* Atheros AP121 */ + AR71XX_MACH_AP121_MINI, /* Atheros AP121-MINI */ + AR71XX_MACH_AP81, /* Atheros AP81 */ + AR71XX_MACH_AP83, /* Atheros AP83 */ + AR71XX_MACH_AP96, /* Atheros AP96 */ + AR71XX_MACH_AW_NR580, /* AzureWave AW-NR580 */ + AR71XX_MACH_DB120, /* Atheros DB120 (AR934x based) */ + AR71XX_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */ + AR71XX_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */ + AR71XX_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */ + AR71XX_MACH_EAP7660D, /* Senao EAP7660D */ + AR71XX_MACH_JA76PF, /* jjPlus JA76PF */ + AR71XX_MACH_JWAP003, /* jjPlus JWAP003 */ + AR71XX_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */ + AR71XX_MACH_MZK_W04NU, /* Planex MZK-W04NU */ + AR71XX_MACH_MZK_W300NH, /* Planex MZK-W300NH */ + AR71XX_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */ + AR71XX_MACH_OM2P, /* OpenMesh OM2P */ + AR71XX_MACH_PB42, /* Atheros PB42 */ + AR71XX_MACH_PB44, /* Atheros PB44 */ + AR71XX_MACH_PB92, /* Atheros PB92 */ + AR71XX_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */ + AR71XX_MACH_RB_411U, /* MikroTik RouterBOARD 411U */ + AR71XX_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */ + AR71XX_MACH_RB_433U, /* MikroTik RouterBOARD 433UAH */ + AR71XX_MACH_RB_450G, /* MikroTik RouterBOARD 450G */ + AR71XX_MACH_RB_450, /* MikroTik RouterBOARD 450 */ + AR71XX_MACH_RB_493, /* Mikrotik RouterBOARD 493/493AH */ + AR71XX_MACH_RB_493G, /* Mikrotik RouterBOARD 493G */ + AR71XX_MACH_RB_750, /* MikroTik RouterBOARD 750 */ + AR71XX_MACH_RW2458N, /* Redwave RW2458N */ + AR71XX_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */ + AR71XX_MACH_TL_MR3020, /* TP-LINK TL-MR3020 */ + AR71XX_MACH_TL_MR3220, /* TP-LINK TL-MR3220 */ + AR71XX_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */ + AR71XX_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */ + AR71XX_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */ + AR71XX_MACH_TL_WR1043ND, /* TP-LINK TL-WR1041ND */ + AR71XX_MACH_TL_WR2543N, /* TP-LINK TL-WR2543N/ND */ + AR71XX_MACH_TL_WR703N, /* TP-LINK TL-WR703N */ + AR71XX_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */ + AR71XX_MACH_TL_WR741ND_V4, /* TP-LINK TL-WR741ND v4*/ + AR71XX_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */ + AR71XX_MACH_TL_WR841N_V7, /* TP-LINK TL-WR841N/ND v7 */ + AR71XX_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */ + AR71XX_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */ + AR71XX_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */ + AR71XX_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */ + AR71XX_MACH_UBNT_LSX, /* Ubiquiti LSX */ + AR71XX_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */ + AR71XX_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */ + AR71XX_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */ + AR71XX_MACH_UBNT_RS, /* Ubiquiti RouterStation */ + AR71XX_MACH_UBNT_UNIFI, /* Unifi */ + AR71XX_MACH_WHR_G301N, /* Buffalo WHR-G301N */ + AR71XX_MACH_WHR_HP_G300N, /* Buffalo WHR-HP-G300N */ + AR71XX_MACH_WHR_HP_GN, /* Buffalo WHR-HP-GN */ + AR71XX_MACH_WNDR3700, /* NETGEAR WNDR3700/WNDR3800/WNDRMAC */ + AR71XX_MACH_WNR2000, /* NETGEAR WNR2000 */ + AR71XX_MACH_WP543, /* Compex WP543 */ + AR71XX_MACH_WRT160NL, /* Linksys WRT160NL */ + AR71XX_MACH_WRT400N, /* Linksys WRT400N */ + AR71XX_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */ + AR71XX_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */ + AR71XX_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */ + AR71XX_MACH_WZR_HP_G450H, /* Buffalo WZR-HP-G450H */ + AR71XX_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */ + AR71XX_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */ +}; + +#endif /* _AR71XX_MACHTYPE_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/nvram.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/nvram.c new file mode 100644 index 000000000..dfab24646 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/nvram.c @@ -0,0 +1,75 @@ +/* + * Atheros AR71xx minimal nvram support + * + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/vmalloc.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/string.h> + +#include "nvram.h" + +char *nvram_find_var(const char *name, const char *buf, unsigned buf_len) +{ + unsigned len = strlen(name); + char *cur, *last; + + if (buf_len == 0 || len == 0) + return NULL; + + if (buf_len < len) + return NULL; + + if (len == 1) + return memchr(buf, (int) *name, buf_len); + + last = (char *) buf + buf_len - len; + for (cur = (char *) buf; cur <= last; cur++) + if (cur[0] == name[0] && memcmp(cur, name, len) == 0) + return cur + len; + + return NULL; +} + +int nvram_parse_mac_addr(const char *nvram, unsigned nvram_len, + const char *name, char *mac) +{ + char *buf; + char *mac_str; + int ret; + int t; + + buf = vmalloc(nvram_len); + if (!buf) + return -ENOMEM; + + memcpy(buf, nvram, nvram_len); + buf[nvram_len - 1] = '\0'; + + mac_str = nvram_find_var(name, buf, nvram_len); + if (!mac_str) { + ret = -EINVAL; + goto free; + } + + t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", + &mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]); + + if (t != 6) { + ret = -EINVAL; + goto free; + } + + ret = 0; + +free: + vfree(buf); + return ret; +} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/nvram.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/nvram.h new file mode 100644 index 000000000..b025d3fc9 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/nvram.h @@ -0,0 +1,19 @@ +/* + * Atheros AR71xx minimal nvram support + * + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _AR71XX_NVRAM_H +#define _AR71XX_NVRAM_H + +char *nvram_find_var(const char *name, const char *buf, + unsigned buf_len) __init; +int nvram_parse_mac_addr(const char *nvram, unsigned nvram_len, + const char *name, char *mac) __init; + +#endif /* _AR71XX_NVRAM_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/pci-ath9k-fixup.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/pci-ath9k-fixup.c new file mode 100644 index 000000000..21f5a6816 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/pci-ath9k-fixup.c @@ -0,0 +1,123 @@ +/* + * Atheros AP94 reference board PCI initialization + * + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/pci.h> +#include <linux/delay.h> + +#include <asm/mach-ar71xx/ar71xx.h> +#include <asm/mach-ar71xx/pci.h> + +struct ath9k_fixup { + u16 *cal_data; + unsigned slot; +}; + +static int ath9k_num_fixups; +static struct ath9k_fixup ath9k_fixups[2]; + +static void ath9k_pci_fixup(struct pci_dev *dev) +{ + void __iomem *mem; + u16 *cal_data = NULL; + u16 cmd; + u32 bar0; + u32 val; + unsigned i; + + for (i = 0; i < ath9k_num_fixups; i++) { + if (ath9k_fixups[i].cal_data == NULL) + continue; + + if (ath9k_fixups[i].slot != PCI_SLOT(dev->devfn)) + continue; + + cal_data = ath9k_fixups[i].cal_data; + break; + } + + if (cal_data == NULL) + return; + + if (*cal_data != 0xa55a) { + pr_err("pci %s: invalid calibration data\n", pci_name(dev)); + return; + } + + pr_info("pci %s: fixup device configuration\n", pci_name(dev)); + + mem = ioremap(AR71XX_PCI_MEM_BASE, 0x10000); + if (!mem) { + pr_err("pci %s: ioremap error\n", pci_name(dev)); + return; + } + + pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0); + + switch (ar71xx_soc) { + case AR71XX_SOC_AR7161: + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, + AR71XX_PCI_MEM_BASE); + break; + case AR71XX_SOC_AR7240: + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0xffff); + break; + + case AR71XX_SOC_AR7241: + case AR71XX_SOC_AR7242: + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0x1000ffff); + break; + + default: + BUG(); + } + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_write_config_word(dev, PCI_COMMAND, cmd); + + /* set pointer to first reg address */ + cal_data += 3; + while (*cal_data != 0xffff) { + u32 reg; + reg = *cal_data++; + val = *cal_data++; + val |= (*cal_data++) << 16; + + __raw_writel(val, mem + reg); + udelay(100); + } + + pci_read_config_dword(dev, PCI_VENDOR_ID, &val); + dev->vendor = val & 0xffff; + dev->device = (val >> 16) & 0xffff; + + pci_read_config_dword(dev, PCI_CLASS_REVISION, &val); + dev->revision = val & 0xff; + dev->class = val >> 8; /* upper 3 bytes */ + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); + pci_write_config_word(dev, PCI_COMMAND, cmd); + + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0); + + iounmap(mem); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup); + +void __init pci_enable_ath9k_fixup(unsigned slot, u16 *cal_data) +{ + if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups)) + return; + + ath9k_fixups[ath9k_num_fixups].slot = slot; + ath9k_fixups[ath9k_num_fixups].cal_data = cal_data; + ath9k_num_fixups++; +} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/pci-ath9k-fixup.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/pci-ath9k-fixup.h new file mode 100644 index 000000000..5794941f0 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/pci-ath9k-fixup.h @@ -0,0 +1,6 @@ +#ifndef _PCI_ATH9K_FIXUP +#define _PCI_ATH9K_FIXUP + +void pci_enable_ath9k_fixup(unsigned slot, u16 *cal_data) __init; + +#endif /* _PCI_ATH9K_FIXUP */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/pci.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/pci.c new file mode 100644 index 000000000..f3c645241 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/pci.c @@ -0,0 +1,105 @@ +/* + * Atheros AR71xx PCI setup code + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Parts of this file are based on Atheros' 2.6.15 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> + +#include <asm/traps.h> + +#include <asm/mach-ar71xx/ar71xx.h> +#include <asm/mach-ar71xx/pci.h> + +unsigned ar71xx_pci_nr_irqs __initdata; +struct ar71xx_pci_irq *ar71xx_pci_irq_map __initdata; + +int (*ar71xx_pci_plat_dev_init)(struct pci_dev *dev); + +static int ar71xx_be_handler(struct pt_regs *regs, int is_fixup) +{ + int err = 0; + + err = ar71xx_pci_be_handler(is_fixup); + + return (is_fixup && !err) ? MIPS_BE_FIXUP : MIPS_BE_FATAL; +} + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + if (ar71xx_pci_plat_dev_init) + return ar71xx_pci_plat_dev_init(dev); + + return 0; +} + +int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin) +{ + int ret = 0; + + switch (ar71xx_soc) { + case AR71XX_SOC_AR7130: + case AR71XX_SOC_AR7141: + case AR71XX_SOC_AR7161: + ret = ar71xx_pcibios_map_irq(dev, slot, pin); + break; + + case AR71XX_SOC_AR7240: + case AR71XX_SOC_AR7241: + case AR71XX_SOC_AR7242: + case AR71XX_SOC_AR9342: + case AR71XX_SOC_AR9344: + ret = ar724x_pcibios_map_irq(dev, slot, pin); + break; + + default: + break; + } + + return ret; +} + +int __init ar71xx_pci_init(unsigned nr_irqs, struct ar71xx_pci_irq *map) +{ + u32 t; + int ret = 0; + + switch (ar71xx_soc) { + case AR71XX_SOC_AR7130: + case AR71XX_SOC_AR7141: + case AR71XX_SOC_AR7161: + board_be_handler = ar71xx_be_handler; + ret = ar71xx_pcibios_init(); + break; + + case AR71XX_SOC_AR7240: + case AR71XX_SOC_AR7241: + case AR71XX_SOC_AR7242: + ret = ar724x_pcibios_init(AR71XX_CPU_IRQ_IP2); + break; + + case AR71XX_SOC_AR9342: + case AR71XX_SOC_AR9344: + t = ar71xx_reset_rr(AR934X_RESET_REG_BOOTSTRAP); + if (t & AR934X_BOOTSTRAP_PCIE_RC) { + ret = ar724x_pcibios_init(AR934X_IP2_IRQ_PCIE); + break; + } + + /* fall through */ + default: + return 0; + } + + ar71xx_pci_nr_irqs = nr_irqs; + ar71xx_pci_irq_map = map; + + return ret; +} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/prom.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/prom.c new file mode 100644 index 000000000..b9b1e64fd --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/prom.c @@ -0,0 +1,191 @@ +/* + * Atheros AR71xx SoC specific prom routines + * + * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/string.h> + +#include <asm/bootinfo.h> +#include <asm/addrspace.h> +#include <asm/fw/myloader/myloader.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +static inline int is_valid_ram_addr(void *addr) +{ + if (((u32) addr > KSEG0) && + ((u32) addr < (KSEG0 + AR71XX_MEM_SIZE_MAX))) + return 1; + + if (((u32) addr > KSEG1) && + ((u32) addr < (KSEG1 + AR71XX_MEM_SIZE_MAX))) + return 1; + + return 0; +} + +static char ar71xx_cmdline_buf[COMMAND_LINE_SIZE] __initdata; +static void __init ar71xx_prom_append_cmdline(const char *name, + const char *value) +{ + snprintf(ar71xx_cmdline_buf, sizeof(ar71xx_cmdline_buf), + " %s=%s", name, value); + strlcat(arcs_cmdline, ar71xx_cmdline_buf, sizeof(arcs_cmdline)); +} + +static const char * __init ar71xx_prom_find_env(char **envp, const char *name) +{ + const char *ret = NULL; + int len; + char **p; + + if (!is_valid_ram_addr(envp)) + return NULL; + + len = strlen(name); + for (p = envp; is_valid_ram_addr(*p); p++) { + if (strncmp(name, *p, len) == 0 && (*p)[len] == '=') { + ret = *p + len + 1; + break; + } + + /* RedBoot env comes in pointer pairs - key, value */ + if (strncmp(name, *p, len) == 0 && (*p)[len] == 0) + if (is_valid_ram_addr(*(++p))) { + ret = *p; + break; + } + } + + return ret; +} + +#ifdef CONFIG_IMAGE_CMDLINE_HACK +extern char __image_cmdline[]; + +static int __init ar71xx_use__image_cmdline(void) +{ + char *p = __image_cmdline; + int replace = 0; + + if (*p == '-') { + replace = 1; + p++; + } + + if (*p == '\0') + return 0; + + if (replace) { + strlcpy(arcs_cmdline, p, sizeof(arcs_cmdline)); + } else { + strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline)); + strlcat(arcs_cmdline, p, sizeof(arcs_cmdline)); + } + + return 1; +} +#else +static inline int ar71xx_use__image_cmdline(void) { return 0; } +#endif + +static int __init ar71xx_prom_init_myloader(void) +{ + struct myloader_info *mylo; + char mac_buf[32]; + unsigned char *mac; + + mylo = myloader_get_info(); + if (!mylo) + return 0; + + switch (mylo->did) { + case DEVID_COMPEX_WP543: + ar71xx_prom_append_cmdline("board", "WP543"); + break; + default: + printk(KERN_WARNING "prom: unknown device id: %x\n", + mylo->did); + return 0; + } + + mac = mylo->macs[0]; + snprintf(mac_buf, sizeof(mac_buf), "%02x:%02x:%02x:%02x:%02x:%02x", + mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); + + ar71xx_prom_append_cmdline("ethaddr", mac_buf); + + ar71xx_use__image_cmdline(); + + return 1; +} + +static __init void ar71xx_prom_init_cmdline(int argc, char **argv) +{ + int i; + + if (ar71xx_use__image_cmdline()) + return; + + if (!is_valid_ram_addr(argv)) + return; + + for (i = 0; i < argc; i++) + if (is_valid_ram_addr(argv[i])) { + strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline)); + strlcat(arcs_cmdline, argv[i], sizeof(arcs_cmdline)); + } +} + +void __init prom_init(void) +{ + const char *env; + char **envp; + + printk(KERN_DEBUG "prom: fw_arg0=%08x, fw_arg1=%08x, " + "fw_arg2=%08x, fw_arg3=%08x\n", + (unsigned int)fw_arg0, (unsigned int)fw_arg1, + (unsigned int)fw_arg2, (unsigned int)fw_arg3); + + + if (ar71xx_prom_init_myloader()) + return; + + ar71xx_prom_init_cmdline(fw_arg0, (char **)fw_arg1); + + envp = (char **)fw_arg2; + if (!strstr(arcs_cmdline, "ethaddr=")) { + env = ar71xx_prom_find_env(envp, "ethaddr"); + if (env) + ar71xx_prom_append_cmdline("ethaddr", env); + } + + if (!strstr(arcs_cmdline, "board=")) { + env = ar71xx_prom_find_env(envp, "board"); + if (env) { + /* Workaround for buggy bootloaders */ + if (strcmp(env, "RouterStation") == 0 || + strcmp(env, "Ubiquiti AR71xx-based board") == 0) + env = "UBNT-RS"; + + if (strcmp(env, "RouterStation PRO") == 0) + env = "UBNT-RSPRO"; + + ar71xx_prom_append_cmdline("board", env); + } + } +} + +void __init prom_free_prom_memory(void) +{ + /* We do not have to prom memory to free */ +} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/setup.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/setup.c new file mode 100644 index 000000000..b1829a6da --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/setup.c @@ -0,0 +1,482 @@ +/* + * Atheros AR71xx SoC specific setup + * + * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Parts of this file are based on Atheros 2.6.15 BSP + * Parts of this file are based on Atheros 2.6.31 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/bootmem.h> + +#include <asm/bootinfo.h> +#include <asm/time.h> /* for mips_hpt_frequency */ +#include <asm/reboot.h> /* for _machine_{restart,halt} */ +#include <asm/mips_machine.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" + +#define AR71XX_SYS_TYPE_LEN 64 + +u32 ar71xx_cpu_freq; +EXPORT_SYMBOL_GPL(ar71xx_cpu_freq); + +u32 ar71xx_ahb_freq; +EXPORT_SYMBOL_GPL(ar71xx_ahb_freq); + +u32 ar71xx_ddr_freq; +EXPORT_SYMBOL_GPL(ar71xx_ddr_freq); + +u32 ar71xx_ref_freq; +EXPORT_SYMBOL_GPL(ar71xx_ref_freq); + +enum ar71xx_soc_type ar71xx_soc; +EXPORT_SYMBOL_GPL(ar71xx_soc); + +u32 ar71xx_soc_rev; +EXPORT_SYMBOL_GPL(ar71xx_soc_rev); + +static char ar71xx_sys_type[AR71XX_SYS_TYPE_LEN]; + +static void ar71xx_restart(char *command) +{ + ar71xx_device_stop(RESET_MODULE_FULL_CHIP); + for (;;) + if (cpu_wait) + cpu_wait(); +} + +static void ar71xx_halt(void) +{ + while (1) + cpu_wait(); +} + +static void __init ar71xx_detect_mem_size(void) +{ + unsigned long size; + + for (size = AR71XX_MEM_SIZE_MIN; size < AR71XX_MEM_SIZE_MAX; + size <<= 1) { + if (!memcmp(ar71xx_detect_mem_size, + ar71xx_detect_mem_size + size, 1024)) + break; + } + + add_memory_region(0, size, BOOT_MEM_RAM); +} + +static void __init ar71xx_detect_sys_type(void) +{ + char *chip = "????"; + u32 id; + u32 major; + u32 minor; + u32 rev = 0; + + id = ar71xx_reset_rr(AR71XX_RESET_REG_REV_ID); + major = id & REV_ID_MAJOR_MASK; + + switch (major) { + case REV_ID_MAJOR_AR71XX: + minor = id & AR71XX_REV_ID_MINOR_MASK; + rev = id >> AR71XX_REV_ID_REVISION_SHIFT; + rev &= AR71XX_REV_ID_REVISION_MASK; + switch (minor) { + case AR71XX_REV_ID_MINOR_AR7130: + ar71xx_soc = AR71XX_SOC_AR7130; + chip = "7130"; + break; + + case AR71XX_REV_ID_MINOR_AR7141: + ar71xx_soc = AR71XX_SOC_AR7141; + chip = "7141"; + break; + + case AR71XX_REV_ID_MINOR_AR7161: + ar71xx_soc = AR71XX_SOC_AR7161; + chip = "7161"; + break; + } + break; + + case REV_ID_MAJOR_AR7240: + ar71xx_soc = AR71XX_SOC_AR7240; + chip = "7240"; + rev = id & AR724X_REV_ID_REVISION_MASK; + break; + + case REV_ID_MAJOR_AR7241: + ar71xx_soc = AR71XX_SOC_AR7241; + chip = "7241"; + rev = id & AR724X_REV_ID_REVISION_MASK; + break; + + case REV_ID_MAJOR_AR7242: + ar71xx_soc = AR71XX_SOC_AR7242; + chip = "7242"; + rev = id & AR724X_REV_ID_REVISION_MASK; + break; + + case REV_ID_MAJOR_AR913X: + minor = id & AR91XX_REV_ID_MINOR_MASK; + rev = id >> AR91XX_REV_ID_REVISION_SHIFT; + rev &= AR91XX_REV_ID_REVISION_MASK; + switch (minor) { + case AR91XX_REV_ID_MINOR_AR9130: + ar71xx_soc = AR71XX_SOC_AR9130; + chip = "9130"; + break; + + case AR91XX_REV_ID_MINOR_AR9132: + ar71xx_soc = AR71XX_SOC_AR9132; + chip = "9132"; + break; + } + break; + + case REV_ID_MAJOR_AR9330: + ar71xx_soc = AR71XX_SOC_AR9330; + chip = "9330"; + rev = id & AR933X_REV_ID_REVISION_MASK; + break; + + case REV_ID_MAJOR_AR9331: + ar71xx_soc = AR71XX_SOC_AR9331; + chip = "9331"; + rev = id & AR933X_REV_ID_REVISION_MASK; + break; + + case REV_ID_MAJOR_AR9341: + ar71xx_soc = AR71XX_SOC_AR9341; + chip = "9341"; + rev = id & AR934X_REV_ID_REVISION_MASK; + break; + + case REV_ID_MAJOR_AR9342: + ar71xx_soc = AR71XX_SOC_AR9342; + chip = "9342"; + rev = id & AR934X_REV_ID_REVISION_MASK; + break; + + case REV_ID_MAJOR_AR9344: + ar71xx_soc = AR71XX_SOC_AR9344; + chip = "9344"; + rev = id & AR934X_REV_ID_REVISION_MASK; + break; + + default: + panic("ar71xx: unknown chip id:0x%08x\n", id); + } + + ar71xx_soc_rev = rev; + + sprintf(ar71xx_sys_type, "Atheros AR%s rev %u", chip, rev); + pr_info("SoC: %s\n", ar71xx_sys_type); +} + +static void __init ar934x_detect_sys_frequency(void) +{ + u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv; + u32 cpu_pll, ddr_pll; + u32 bootstrap; + + bootstrap = ar71xx_reset_rr(AR934X_RESET_REG_BOOTSTRAP); + if (bootstrap & AR934X_BOOTSTRAP_REF_CLK_40) + ar71xx_ref_freq = 40 * 1000 * 1000; + else + ar71xx_ref_freq = 25 * 1000 * 1000; + + pll = ar71xx_pll_rr(AR934X_PLL_REG_CPU_CONFIG); + out_div = AR934X_CPU_PLL_CFG_OUTDIV_GET(pll); + ref_div = AR934X_CPU_PLL_CFG_REFDIV_GET(pll); + nint = AR934X_CPU_PLL_CFG_NINT_GET(pll); + frac = AR934X_CPU_PLL_CFG_NFRAC_GET(pll); + + cpu_pll = nint * ar71xx_ref_freq / ref_div; + cpu_pll += frac * ar71xx_ref_freq / (ref_div * (2 << 6)); + cpu_pll /= (1 << out_div); + + pll = ar71xx_pll_rr(AR934X_PLL_REG_DDR_CONFIG); + out_div = AR934X_DDR_PLL_CFG_OUTDIV_GET(pll); + ref_div = AR934X_DDR_PLL_CFG_REFDIV_GET(pll); + nint = AR934X_DDR_PLL_CFG_NINT_GET(pll); + frac = AR934X_DDR_PLL_CFG_NFRAC_GET(pll); + + ddr_pll = nint * ar71xx_ref_freq / ref_div; + ddr_pll += frac * ar71xx_ref_freq / (ref_div * (2 << 10)); + ddr_pll /= (1 << out_div); + + clk_ctrl = ar71xx_pll_rr(AR934X_PLL_REG_DDR_CTRL_CLOCK); + + if (clk_ctrl & AR934X_CPU_DDR_CLK_CTRL_CPU_PLL_BYPASS) { + ar71xx_cpu_freq = ar71xx_ref_freq; + } else { + postdiv = AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_GET(clk_ctrl); + + if (clk_ctrl & AR934X_CPU_DDR_CLK_CTRL_CPUCLK_FROM_CPUPLL) + ar71xx_cpu_freq = cpu_pll / (postdiv + 1); + else + ar71xx_cpu_freq = ddr_pll / (postdiv + 1); + } + + if (clk_ctrl & AR934X_CPU_DDR_CLK_CTRL_DDR_PLL_BYPASS) { + ar71xx_ddr_freq = ar71xx_ref_freq; + } else { + postdiv = AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_GET(clk_ctrl); + + if (clk_ctrl & AR934X_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL) + ar71xx_ddr_freq = ddr_pll / (postdiv + 1); + else + ar71xx_ddr_freq = cpu_pll / (postdiv + 1); + } + + if (clk_ctrl & AR934X_CPU_DDR_CLK_CTRL_AHB_PLL_BYPASS) { + ar71xx_ahb_freq = ar71xx_ref_freq; + } else { + postdiv = AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_GET(clk_ctrl); + + if (clk_ctrl & AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL) + ar71xx_ahb_freq = ddr_pll / (postdiv + 1); + else + ar71xx_ahb_freq = cpu_pll / (postdiv + 1); + } +} + +static void __init ar91xx_detect_sys_frequency(void) +{ + u32 pll; + u32 freq; + u32 div; + + ar71xx_ref_freq = 5 * 1000 * 1000; + + pll = ar71xx_pll_rr(AR91XX_PLL_REG_CPU_CONFIG); + + div = ((pll >> AR91XX_PLL_DIV_SHIFT) & AR91XX_PLL_DIV_MASK); + freq = div * ar71xx_ref_freq; + + ar71xx_cpu_freq = freq; + + div = ((pll >> AR91XX_DDR_DIV_SHIFT) & AR91XX_DDR_DIV_MASK) + 1; + ar71xx_ddr_freq = freq / div; + + div = (((pll >> AR91XX_AHB_DIV_SHIFT) & AR91XX_AHB_DIV_MASK) + 1) * 2; + ar71xx_ahb_freq = ar71xx_cpu_freq / div; +} + +static void __init ar71xx_detect_sys_frequency(void) +{ + u32 pll; + u32 freq; + u32 div; + + ar71xx_ref_freq = 40 * 1000 * 1000; + + pll = ar71xx_pll_rr(AR71XX_PLL_REG_CPU_CONFIG); + + div = ((pll >> AR71XX_PLL_DIV_SHIFT) & AR71XX_PLL_DIV_MASK) + 1; + freq = div * ar71xx_ref_freq; + + div = ((pll >> AR71XX_CPU_DIV_SHIFT) & AR71XX_CPU_DIV_MASK) + 1; + ar71xx_cpu_freq = freq / div; + + div = ((pll >> AR71XX_DDR_DIV_SHIFT) & AR71XX_DDR_DIV_MASK) + 1; + ar71xx_ddr_freq = freq / div; + + div = (((pll >> AR71XX_AHB_DIV_SHIFT) & AR71XX_AHB_DIV_MASK) + 1) * 2; + ar71xx_ahb_freq = ar71xx_cpu_freq / div; +} + +static void __init ar724x_detect_sys_frequency(void) +{ + u32 pll; + u32 freq; + u32 div; + + ar71xx_ref_freq = 5 * 1000 * 1000; + + pll = ar71xx_pll_rr(AR724X_PLL_REG_CPU_CONFIG); + + div = ((pll >> AR724X_PLL_DIV_SHIFT) & AR724X_PLL_DIV_MASK); + freq = div * ar71xx_ref_freq; + + div = ((pll >> AR724X_PLL_REF_DIV_SHIFT) & AR724X_PLL_REF_DIV_MASK); + freq *= div; + + ar71xx_cpu_freq = freq; + + div = ((pll >> AR724X_DDR_DIV_SHIFT) & AR724X_DDR_DIV_MASK) + 1; + ar71xx_ddr_freq = freq / div; + + div = (((pll >> AR724X_AHB_DIV_SHIFT) & AR724X_AHB_DIV_MASK) + 1) * 2; + ar71xx_ahb_freq = ar71xx_cpu_freq / div; +} + +static void __init ar933x_detect_sys_frequency(void) +{ + u32 clock_ctrl; + u32 cpu_config; + u32 freq; + u32 t; + + t = ar71xx_reset_rr(AR933X_RESET_REG_BOOTSTRAP); + if (t & AR933X_BOOTSTRAP_REF_CLK_40) + ar71xx_ref_freq = (40 * 1000 * 1000); + else + ar71xx_ref_freq = (25 * 1000 * 1000); + + clock_ctrl = ar71xx_pll_rr(AR933X_PLL_CLOCK_CTRL_REG); + if (clock_ctrl & AR933X_PLL_CLOCK_CTRL_BYPASS) { + ar71xx_cpu_freq = ar71xx_ref_freq; + ar71xx_ahb_freq = ar71xx_ref_freq; + ar71xx_ddr_freq = ar71xx_ref_freq; + } else { + cpu_config = ar71xx_pll_rr(AR933X_PLL_CPU_CONFIG_REG); + + t = (cpu_config >> AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT) & + AR933X_PLL_CPU_CONFIG_REFDIV_MASK; + freq = ar71xx_ref_freq / t; + + t = (cpu_config >> AR933X_PLL_CPU_CONFIG_NINT_SHIFT) & + AR933X_PLL_CPU_CONFIG_NINT_MASK; + freq *= t; + + t = (cpu_config >> AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & + AR933X_PLL_CPU_CONFIG_OUTDIV_MASK; + if (t == 0) + t = 1; + + freq >>= t; + + t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT) & + AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK) + 1; + ar71xx_cpu_freq = freq / t; + + t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT) & + AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK) + 1; + ar71xx_ddr_freq = freq / t; + + t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT) & + AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK) + 1; + ar71xx_ahb_freq = freq / t; + } +} + +static void __init detect_sys_frequency(void) +{ + switch (ar71xx_soc) { + case AR71XX_SOC_AR7130: + case AR71XX_SOC_AR7141: + case AR71XX_SOC_AR7161: + ar71xx_detect_sys_frequency(); + break; + + case AR71XX_SOC_AR7240: + case AR71XX_SOC_AR7241: + case AR71XX_SOC_AR7242: + ar724x_detect_sys_frequency(); + break; + + case AR71XX_SOC_AR9130: + case AR71XX_SOC_AR9132: + ar91xx_detect_sys_frequency(); + break; + + case AR71XX_SOC_AR9330: + case AR71XX_SOC_AR9331: + ar933x_detect_sys_frequency(); + break; + + case AR71XX_SOC_AR9341: + case AR71XX_SOC_AR9342: + case AR71XX_SOC_AR9344: + ar934x_detect_sys_frequency(); + break; + default: + BUG(); + } +} + +const char *get_system_type(void) +{ + return ar71xx_sys_type; +} + +unsigned int __cpuinit get_c0_compare_irq(void) +{ + return CP0_LEGACY_COMPARE_IRQ; +} + +void __init plat_mem_setup(void) +{ + set_io_port_base(KSEG1); + + ar71xx_ddr_base = ioremap_nocache(AR71XX_DDR_CTRL_BASE, + AR71XX_DDR_CTRL_SIZE); + + ar71xx_pll_base = ioremap_nocache(AR71XX_PLL_BASE, + AR71XX_PLL_SIZE); + + ar71xx_reset_base = ioremap_nocache(AR71XX_RESET_BASE, + AR71XX_RESET_SIZE); + + ar71xx_gpio_base = ioremap_nocache(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE); + + ar71xx_usb_ctrl_base = ioremap_nocache(AR71XX_USB_CTRL_BASE, + AR71XX_USB_CTRL_SIZE); + + ar71xx_detect_mem_size(); + ar71xx_detect_sys_type(); + detect_sys_frequency(); + + pr_info("Clocks: CPU:%u.%03uMHz, DDR:%u.%03uMHz, AHB:%u.%03uMHz, " + "Ref:%u.%03uMHz", + ar71xx_cpu_freq / 1000000, (ar71xx_cpu_freq / 1000) % 1000, + ar71xx_ddr_freq / 1000000, (ar71xx_ddr_freq / 1000) % 1000, + ar71xx_ahb_freq / 1000000, (ar71xx_ahb_freq / 1000) % 1000, + ar71xx_ref_freq / 1000000, (ar71xx_ref_freq / 1000) % 1000); + + _machine_restart = ar71xx_restart; + _machine_halt = ar71xx_halt; + pm_power_off = ar71xx_halt; +} + +void __init plat_time_init(void) +{ + mips_hpt_frequency = ar71xx_cpu_freq / 2; +} + +__setup("board=", mips_machtype_setup); + +static int __init ar71xx_machine_setup(void) +{ + ar71xx_gpio_init(); + + ar71xx_add_device_uart(); + ar71xx_add_device_wdt(); + + mips_machine_setup(); + return 0; +} + +arch_initcall(ar71xx_machine_setup); + +static void __init ar71xx_generic_init(void) +{ + /* Nothing to do */ +} + +MIPS_MACHINE(AR71XX_MACH_GENERIC, "Generic", "Generic AR71xx board", + ar71xx_generic_init); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/ar71xx.h b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/ar71xx.h new file mode 100644 index 000000000..c391fee4a --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/ar71xx.h @@ -0,0 +1,933 @@ +/* + * Atheros AR71xx SoC specific definitions + * + * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Parts of this file are based on Atheros 2.6.15 BSP + * Parts of this file are based on Atheros 2.6.31 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __ASM_MACH_AR71XX_H +#define __ASM_MACH_AR71XX_H + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/bitops.h> + +#ifndef __ASSEMBLER__ + +#define AR71XX_PCI_MEM_BASE 0x10000000 +#define AR71XX_PCI_MEM_SIZE 0x08000000 +#define AR71XX_APB_BASE 0x18000000 +#define AR71XX_GE0_BASE 0x19000000 +#define AR71XX_GE0_SIZE 0x01000000 +#define AR71XX_GE1_BASE 0x1a000000 +#define AR71XX_GE1_SIZE 0x01000000 +#define AR71XX_EHCI_BASE 0x1b000000 +#define AR71XX_EHCI_SIZE 0x01000000 +#define AR71XX_OHCI_BASE 0x1c000000 +#define AR71XX_OHCI_SIZE 0x01000000 +#define AR7240_OHCI_BASE 0x1b000000 +#define AR7240_OHCI_SIZE 0x01000000 +#define AR71XX_SPI_BASE 0x1f000000 +#define AR71XX_SPI_SIZE 0x01000000 + +#define AR71XX_DDR_CTRL_BASE (AR71XX_APB_BASE + 0x00000000) +#define AR71XX_DDR_CTRL_SIZE 0x10000 +#define AR71XX_CPU_BASE (AR71XX_APB_BASE + 0x00010000) +#define AR71XX_UART_BASE (AR71XX_APB_BASE + 0x00020000) +#define AR71XX_UART_SIZE 0x10000 +#define AR71XX_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000) +#define AR71XX_USB_CTRL_SIZE 0x10000 +#define AR71XX_GPIO_BASE (AR71XX_APB_BASE + 0x00040000) +#define AR71XX_GPIO_SIZE 0x10000 +#define AR71XX_PLL_BASE (AR71XX_APB_BASE + 0x00050000) +#define AR71XX_PLL_SIZE 0x10000 +#define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000) +#define AR71XX_RESET_SIZE 0x10000 +#define AR71XX_MII_BASE (AR71XX_APB_BASE + 0x00070000) +#define AR71XX_MII_SIZE 0x10000 +#define AR71XX_SLIC_BASE (AR71XX_APB_BASE + 0x00090000) +#define AR71XX_SLIC_SIZE 0x10000 +#define AR71XX_DMA_BASE (AR71XX_APB_BASE + 0x000A0000) +#define AR71XX_DMA_SIZE 0x10000 +#define AR71XX_STEREO_BASE (AR71XX_APB_BASE + 0x000B0000) +#define AR71XX_STEREO_SIZE 0x10000 + +#define AR724X_PCI_CRP_BASE (AR71XX_APB_BASE + 0x000C0000) +#define AR724X_PCI_CRP_SIZE 0x100 + +#define AR724X_PCI_CTRL_BASE (AR71XX_APB_BASE + 0x000F0000) +#define AR724X_PCI_CTRL_SIZE 0x100 + +#define AR91XX_WMAC_BASE (AR71XX_APB_BASE + 0x000C0000) +#define AR91XX_WMAC_SIZE 0x30000 + +#define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000) +#define AR933X_UART_SIZE 0x14 +#define AR933X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) +#define AR933X_GMAC_SIZE 0x04 +#define AR933X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) +#define AR933X_WMAC_SIZE 0x20000 + +#define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) +#define AR934X_WMAC_SIZE 0x20000 +#define AR934X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) +#define AR934X_GMAC_SIZE 0x14 + +#define AR71XX_MEM_SIZE_MIN 0x0200000 +#define AR71XX_MEM_SIZE_MAX 0x10000000 + +#define AR71XX_CPU_IRQ_BASE 0 +#define AR71XX_MISC_IRQ_BASE 8 +#define AR71XX_MISC_IRQ_COUNT 32 +#define AR71XX_GPIO_IRQ_BASE 40 +#define AR71XX_GPIO_IRQ_COUNT 32 +#define AR71XX_PCI_IRQ_BASE 72 +#define AR71XX_PCI_IRQ_COUNT 6 +#define AR934X_IP2_IRQ_BASE 78 +#define AR934X_IP2_IRQ_COUNT 2 + +#define AR71XX_CPU_IRQ_IP2 (AR71XX_CPU_IRQ_BASE + 2) +#define AR71XX_CPU_IRQ_USB (AR71XX_CPU_IRQ_BASE + 3) +#define AR71XX_CPU_IRQ_GE0 (AR71XX_CPU_IRQ_BASE + 4) +#define AR71XX_CPU_IRQ_GE1 (AR71XX_CPU_IRQ_BASE + 5) +#define AR71XX_CPU_IRQ_MISC (AR71XX_CPU_IRQ_BASE + 6) +#define AR71XX_CPU_IRQ_TIMER (AR71XX_CPU_IRQ_BASE + 7) + +#define AR71XX_MISC_IRQ_TIMER (AR71XX_MISC_IRQ_BASE + 0) +#define AR71XX_MISC_IRQ_ERROR (AR71XX_MISC_IRQ_BASE + 1) +#define AR71XX_MISC_IRQ_GPIO (AR71XX_MISC_IRQ_BASE + 2) +#define AR71XX_MISC_IRQ_UART (AR71XX_MISC_IRQ_BASE + 3) +#define AR71XX_MISC_IRQ_WDOG (AR71XX_MISC_IRQ_BASE + 4) +#define AR71XX_MISC_IRQ_PERFC (AR71XX_MISC_IRQ_BASE + 5) +#define AR71XX_MISC_IRQ_OHCI (AR71XX_MISC_IRQ_BASE + 6) +#define AR71XX_MISC_IRQ_DMA (AR71XX_MISC_IRQ_BASE + 7) +#define AR71XX_MISC_IRQ_TIMER2 (AR71XX_MISC_IRQ_BASE + 8) +#define AR71XX_MISC_IRQ_TIMER3 (AR71XX_MISC_IRQ_BASE + 9) +#define AR71XX_MISC_IRQ_TIMER4 (AR71XX_MISC_IRQ_BASE + 10) +#define AR71XX_MISC_IRQ_DDR_PERF (AR71XX_MISC_IRQ_BASE + 11) +#define AR71XX_MISC_IRQ_ENET_LINK (AR71XX_MISC_IRQ_BASE + 12) + +#define AR71XX_GPIO_IRQ(_x) (AR71XX_GPIO_IRQ_BASE + (_x)) + +#define AR71XX_PCI_IRQ_DEV0 (AR71XX_PCI_IRQ_BASE + 0) +#define AR71XX_PCI_IRQ_DEV1 (AR71XX_PCI_IRQ_BASE + 1) +#define AR71XX_PCI_IRQ_DEV2 (AR71XX_PCI_IRQ_BASE + 2) +#define AR71XX_PCI_IRQ_CORE (AR71XX_PCI_IRQ_BASE + 4) + +#define AR934X_IP2_IRQ_WMAC (AR934X_IP2_IRQ_BASE + 0) +#define AR934X_IP2_IRQ_PCIE (AR934X_IP2_IRQ_BASE + 1) + +extern u32 ar71xx_ahb_freq; +extern u32 ar71xx_cpu_freq; +extern u32 ar71xx_ddr_freq; +extern u32 ar71xx_ref_freq; + +enum ar71xx_soc_type { + AR71XX_SOC_UNKNOWN, + AR71XX_SOC_AR7130, + AR71XX_SOC_AR7141, + AR71XX_SOC_AR7161, + AR71XX_SOC_AR7240, + AR71XX_SOC_AR7241, + AR71XX_SOC_AR7242, + AR71XX_SOC_AR9130, + AR71XX_SOC_AR9132, + AR71XX_SOC_AR9330, + AR71XX_SOC_AR9331, + AR71XX_SOC_AR9341, + AR71XX_SOC_AR9342, + AR71XX_SOC_AR9344, +}; +extern u32 ar71xx_soc_rev; + +extern enum ar71xx_soc_type ar71xx_soc; + +/* + * PLL block + */ +#define AR71XX_PLL_REG_CPU_CONFIG 0x00 +#define AR71XX_PLL_REG_SEC_CONFIG 0x04 +#define AR71XX_PLL_REG_ETH0_INT_CLOCK 0x10 +#define AR71XX_PLL_REG_ETH1_INT_CLOCK 0x14 + +#define AR71XX_PLL_DIV_SHIFT 3 +#define AR71XX_PLL_DIV_MASK 0x1f +#define AR71XX_CPU_DIV_SHIFT 16 +#define AR71XX_CPU_DIV_MASK 0x3 +#define AR71XX_DDR_DIV_SHIFT 18 +#define AR71XX_DDR_DIV_MASK 0x3 +#define AR71XX_AHB_DIV_SHIFT 20 +#define AR71XX_AHB_DIV_MASK 0x7 + +#define AR71XX_ETH0_PLL_SHIFT 17 +#define AR71XX_ETH1_PLL_SHIFT 19 + +#define AR724X_PLL_REG_CPU_CONFIG 0x00 +#define AR724X_PLL_REG_PCIE_CONFIG 0x18 + +#define AR724X_PLL_DIV_SHIFT 0 +#define AR724X_PLL_DIV_MASK 0x3ff +#define AR724X_PLL_REF_DIV_SHIFT 10 +#define AR724X_PLL_REF_DIV_MASK 0xf +#define AR724X_AHB_DIV_SHIFT 19 +#define AR724X_AHB_DIV_MASK 0x1 +#define AR724X_DDR_DIV_SHIFT 22 +#define AR724X_DDR_DIV_MASK 0x3 + +#define AR7242_PLL_REG_ETH0_INT_CLOCK 0x2c + +#define AR91XX_PLL_REG_CPU_CONFIG 0x00 +#define AR91XX_PLL_REG_ETH_CONFIG 0x04 +#define AR91XX_PLL_REG_ETH0_INT_CLOCK 0x14 +#define AR91XX_PLL_REG_ETH1_INT_CLOCK 0x18 + +#define AR91XX_PLL_DIV_SHIFT 0 +#define AR91XX_PLL_DIV_MASK 0x3ff +#define AR91XX_DDR_DIV_SHIFT 22 +#define AR91XX_DDR_DIV_MASK 0x3 +#define AR91XX_AHB_DIV_SHIFT 19 +#define AR91XX_AHB_DIV_MASK 0x1 + +#define AR91XX_ETH0_PLL_SHIFT 20 +#define AR91XX_ETH1_PLL_SHIFT 22 + +#define AR933X_PLL_CPU_CONFIG_REG 0x00 +#define AR933X_PLL_CLOCK_CTRL_REG 0x08 + +#define AR933X_PLL_CPU_CONFIG_NINT_SHIFT 10 +#define AR933X_PLL_CPU_CONFIG_NINT_MASK 0x3f +#define AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT 16 +#define AR933X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f +#define AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT 23 +#define AR933X_PLL_CPU_CONFIG_OUTDIV_MASK 0x7 + +#define AR933X_PLL_CLOCK_CTRL_BYPASS BIT(2) +#define AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT 5 +#define AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK 0x3 +#define AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT 10 +#define AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK 0x3 +#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT 15 +#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK 0x7 + +#define AR934X_PLL_REG_CPU_CONFIG 0x00 +#define AR934X_PLL_REG_DDR_CONFIG 0x04 +#define AR934X_PLL_REG_DDR_CTRL_CLOCK 0x8 + +#define AR934X_CPU_PLL_CFG_OUTDIV_MSB 21 +#define AR934X_CPU_PLL_CFG_OUTDIV_LSB 19 +#define AR934X_CPU_PLL_CFG_OUTDIV_MASK 0x00380000 + +#define AR934X_CPU_PLL_CFG_OUTDIV_GET(x) \ + (((x) & AR934X_CPU_PLL_CFG_OUTDIV_MASK) >> \ + AR934X_CPU_PLL_CFG_OUTDIV_LSB) + +#define AR934X_DDR_PLL_CFG_OUTDIV_MSB 25 +#define AR934X_DDR_PLL_CFG_OUTDIV_LSB 23 +#define AR934X_DDR_PLL_CFG_OUTDIV_MASK 0x03800000 + +#define AR934X_DDR_PLL_CFG_OUTDIV_GET(x) \ + (((x) & AR934X_DDR_PLL_CFG_OUTDIV_MASK) >> \ + AR934X_DDR_PLL_CFG_OUTDIV_LSB) + +#define AR934X_DDR_PLL_CFG_OUTDIV_SET(x) \ + (((x) << AR934X_DDR_PLL_CFG_OUTDIV_LSB) & \ + AR934X_DDR_PLL_CFG_OUTDIV_MASK) + +#define AR934X_CPU_PLL_CFG_REFDIV_MSB 16 +#define AR934X_CPU_PLL_CFG_REFDIV_LSB 12 +#define AR934X_CPU_PLL_CFG_REFDIV_MASK 0x0001f000 + +#define AR934X_CPU_PLL_CFG_REFDIV_GET(x) \ + (((x) & AR934X_CPU_PLL_CFG_REFDIV_MASK) >> \ + AR934X_CPU_PLL_CFG_REFDIV_LSB) + +#define AR934X_CPU_PLL_CFG_REFDIV_SET(x) \ + (((x) << AR934X_CPU_PLL_CFG_REFDIV_LSB) & \ + AR934X_CPU_PLL_CFG_REFDIV_MASK) + +#define AR934X_CPU_PLL_CFG_REFDIV_RESET 2 + +#define AR934X_CPU_PLL_CFG_NINT_MSB 11 +#define AR934X_CPU_PLL_CFG_NINT_LSB 6 +#define AR934X_CPU_PLL_CFG_NINT_MASK 0x00000fc0 + +#define AR934X_CPU_PLL_CFG_NINT_GET(x) \ + (((x) & AR934X_CPU_PLL_CFG_NINT_MASK) >> \ + AR934X_CPU_PLL_CFG_NINT_LSB) + +#define AR934X_CPU_PLL_CFG_NINT_SET(x) \ + (((x) << AR934X_CPU_PLL_CFG_NINT_LSB) & \ + AR934X_CPU_PLL_CFG_NINT_MASK) + +#define AR934X_CPU_PLL_CFG_NINT_RESET 20 + +#define AR934X_CPU_PLL_CFG_NFRAC_MSB 5 +#define AR934X_CPU_PLL_CFG_NFRAC_LSB 0 +#define AR934X_CPU_PLL_CFG_NFRAC_MASK 0x0000003f + +#define AR934X_CPU_PLL_CFG_NFRAC_GET(x) \ + (((x) & AR934X_CPU_PLL_CFG_NFRAC_MASK) >> \ + AR934X_CPU_PLL_CFG_NFRAC_LSB) + +#define AR934X_CPU_PLL_CFG_NFRAC_SET(x) \ + (((x) << AR934X_CPU_PLL_CFG_NFRAC_LSB) & \ + AR934X_CPU_PLL_CFG_NFRAC_MASK) + +#define AR934X_DDR_PLL_CFG_REFDIV_MSB 20 +#define AR934X_DDR_PLL_CFG_REFDIV_LSB 16 +#define AR934X_DDR_PLL_CFG_REFDIV_MASK 0x001f0000 + +#define AR934X_DDR_PLL_CFG_REFDIV_GET(x) \ + (((x) & AR934X_DDR_PLL_CFG_REFDIV_MASK) >> \ + AR934X_DDR_PLL_CFG_REFDIV_LSB) + +#define AR934X_DDR_PLL_CFG_REFDIV_SET(x) \ + (((x) << AR934X_DDR_PLL_CFG_REFDIV_LSB) & \ + AR934X_DDR_PLL_CFG_REFDIV_MASK) + +#define AR934X_DDR_PLL_CFG_REFDIV_RESET 2 + +#define AR934X_DDR_PLL_CFG_NINT_MSB 15 +#define AR934X_DDR_PLL_CFG_NINT_LSB 10 +#define AR934X_DDR_PLL_CFG_NINT_MASK 0x0000fc00 + +#define AR934X_DDR_PLL_CFG_NINT_GET(x) \ + (((x) & AR934X_DDR_PLL_CFG_NINT_MASK) >> \ + AR934X_DDR_PLL_CFG_NINT_LSB) + +#define AR934X_DDR_PLL_CFG_NINT_SET(x) \ + (((x) << AR934X_DDR_PLL_CFG_NINT_LSB) & \ + AR934X_DDR_PLL_CFG_NINT_MASK) + +#define AR934X_DDR_PLL_CFG_NINT_RESET 20 + +#define AR934X_DDR_PLL_CFG_NFRAC_MSB 9 +#define AR934X_DDR_PLL_CFG_NFRAC_LSB 0 +#define AR934X_DDR_PLL_CFG_NFRAC_MASK 0x000003ff + +#define AR934X_DDR_PLL_CFG_NFRAC_GET(x) \ + (((x) & AR934X_DDR_PLL_CFG_NFRAC_MASK) >> \ + AR934X_DDR_PLL_CFG_NFRAC_LSB) + +#define AR934X_DDR_PLL_CFG_NFRAC_SET(x) \ + (((x) << AR934X_DDR_PLL_CFG_NFRAC_LSB) & \ + AR934X_DDR_PLL_CFG_NFRAC_MASK) + +#define AR934X_DDR_PLL_CFG_NFRAC_RESET 512 + +#define AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MSB 19 +#define AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_LSB 15 +#define AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK 0x000f8000 + +#define AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_GET(x) \ + (((x) & AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK) >> \ + AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_LSB) + +#define AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_SET(x) \ + (((x) << AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_LSB) & \ + AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK) + +#define AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_RESET 0 + +#define AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MSB 14 +#define AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_LSB 10 +#define AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK 0x00007c00 + +#define AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_GET(x) \ + (((x) & AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK) >> \ + AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_LSB) + +#define AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_SET(x) \ + (((x) << AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_LSB) & \ + AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK) + +#define AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_RESET 0 + +#define AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MSB 9 +#define AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_LSB 5 +#define AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK 0x000003e0 + +#define AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_GET(x) \ + (((x) & AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK) >> \ + AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_LSB) + +#define AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SET(x) \ + (((x) << AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_LSB) & \ + AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK) + +#define AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_RESET 0 + +#define AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_MSB 24 +#define AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_LSB 24 +#define AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_MASK 0x01000000 + +#define AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_GET(x) \ + (((x) & AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_MASK) >> \ + AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_LSB) + +#define AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_SET(x) \ + (((x) << AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_LSB) & \ + AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_MASK) + +#define AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_RESET 1 + +#define AR934X_CPU_DDR_CLK_CTRL_CPU_PLL_BYPASS BIT(2) +#define AR934X_CPU_DDR_CLK_CTRL_DDR_PLL_BYPASS BIT(3) +#define AR934X_CPU_DDR_CLK_CTRL_AHB_PLL_BYPASS BIT(4) +#define AR934X_CPU_DDR_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20) +#define AR934X_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) +#define AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) + +extern void __iomem *ar71xx_pll_base; + +static inline void ar71xx_pll_wr(unsigned reg, u32 val) +{ + __raw_writel(val, ar71xx_pll_base + reg); +} + +static inline u32 ar71xx_pll_rr(unsigned reg) +{ + return __raw_readl(ar71xx_pll_base + reg); +} + +/* + * USB_CONFIG block + */ +#define USB_CTRL_REG_FLADJ 0x00 +#define USB_CTRL_REG_CONFIG 0x04 + +extern void __iomem *ar71xx_usb_ctrl_base; + +static inline void ar71xx_usb_ctrl_wr(unsigned reg, u32 val) +{ + __raw_writel(val, ar71xx_usb_ctrl_base + reg); +} + +static inline u32 ar71xx_usb_ctrl_rr(unsigned reg) +{ + return __raw_readl(ar71xx_usb_ctrl_base + reg); +} + +/* + * GPIO block + */ +#define AR71XX_GPIO_REG_OE 0x00 +#define AR71XX_GPIO_REG_IN 0x04 +#define AR71XX_GPIO_REG_OUT 0x08 +#define AR71XX_GPIO_REG_SET 0x0c +#define AR71XX_GPIO_REG_CLEAR 0x10 +#define AR71XX_GPIO_REG_INT_MODE 0x14 +#define AR71XX_GPIO_REG_INT_TYPE 0x18 +#define AR71XX_GPIO_REG_INT_POLARITY 0x1c +#define AR71XX_GPIO_REG_INT_PENDING 0x20 +#define AR71XX_GPIO_REG_INT_ENABLE 0x24 +#define AR71XX_GPIO_REG_FUNC 0x28 + +#define AR934X_GPIO_REG_OUT_FUNC0 0x2c +#define AR934X_GPIO_REG_OUT_FUNC1 0x30 +#define AR934X_GPIO_REG_OUT_FUNC2 0x34 +#define AR934X_GPIO_REG_OUT_FUNC3 0x38 +#define AR934X_GPIO_REG_OUT_FUNC4 0x3c +#define AR934X_GPIO_REG_OUT_FUNC5 0x40 +#define AR934X_GPIO_REG_FUNC 0x6c + +#define AR71XX_GPIO_FUNC_STEREO_EN BIT(17) +#define AR71XX_GPIO_FUNC_SLIC_EN BIT(16) +#define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13) +#define AR71XX_GPIO_FUNC_SPI_CS1_EN BIT(12) +#define AR71XX_GPIO_FUNC_UART_EN BIT(8) +#define AR71XX_GPIO_FUNC_USB_OC_EN BIT(4) +#define AR71XX_GPIO_FUNC_USB_CLK_EN BIT(0) + +#define AR71XX_GPIO_COUNT 16 + +#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN BIT(19) +#define AR724X_GPIO_FUNC_SPI_EN BIT(18) +#define AR724X_GPIO_FUNC_SPI_CS_EN2 BIT(14) +#define AR724X_GPIO_FUNC_SPI_CS_EN1 BIT(13) +#define AR724X_GPIO_FUNC_CLK_OBS5_EN BIT(12) +#define AR724X_GPIO_FUNC_CLK_OBS4_EN BIT(11) +#define AR724X_GPIO_FUNC_CLK_OBS3_EN BIT(10) +#define AR724X_GPIO_FUNC_CLK_OBS2_EN BIT(9) +#define AR724X_GPIO_FUNC_CLK_OBS1_EN BIT(8) +#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7) +#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6) +#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5) +#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4) +#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3) +#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2) +#define AR724X_GPIO_FUNC_UART_EN BIT(1) +#define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0) + +#define AR7240_GPIO_COUNT 18 +#define AR7241_GPIO_COUNT 20 + +#define AR91XX_GPIO_FUNC_WMAC_LED_EN BIT(22) +#define AR91XX_GPIO_FUNC_EXP_PORT_CS_EN BIT(21) +#define AR91XX_GPIO_FUNC_I2S_REFCLKEN BIT(20) +#define AR91XX_GPIO_FUNC_I2S_MCKEN BIT(19) +#define AR91XX_GPIO_FUNC_I2S1_EN BIT(18) +#define AR91XX_GPIO_FUNC_I2S0_EN BIT(17) +#define AR91XX_GPIO_FUNC_SLIC_EN BIT(16) +#define AR91XX_GPIO_FUNC_UART_RTSCTS_EN BIT(9) +#define AR91XX_GPIO_FUNC_UART_EN BIT(8) +#define AR91XX_GPIO_FUNC_USB_CLK_EN BIT(4) + +#define AR91XX_GPIO_COUNT 22 + +#define AR933X_GPIO_FUNC_SPDIF2TCK BIT(31) +#define AR933X_GPIO_FUNC_SPDIF_EN BIT(30) +#define AR933X_GPIO_FUNC_I2SO_22_18_EN BIT(29) +#define AR933X_GPIO_FUNC_I2S_MCK_EN BIT(27) +#define AR933X_GPIO_FUNC_I2SO_EN BIT(26) +#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_DUPL BIT(25) +#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_COLL BIT(24) +#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_ACT BIT(23) +#define AR933X_GPIO_FUNC_SPI_EN BIT(18) +#define AR933X_GPIO_FUNC_SPI_CS_EN2 BIT(14) +#define AR933X_GPIO_FUNC_SPI_CS_EN1 BIT(13) +#define AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7) +#define AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6) +#define AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5) +#define AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4) +#define AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3) +#define AR933X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2) +#define AR933X_GPIO_FUNC_UART_EN BIT(1) +#define AR933X_GPIO_FUNC_JTAG_DISABLE BIT(0) + +#define AR933X_GPIO_COUNT 30 + +#define AR934X_GPIO_FUNC_SPI_CS_1_EN BIT(14) +#define AR934X_GPIO_FUNC_SPI_CS_0_EN BIT(13) + +#define AR934X_GPIO_COUNT 23 +#define AR934X_GPIO_FUNC_DDR_DQOE_EN BIT(17) + +#define AR934X_GPIO_OUT_GPIO 0x00 + +extern void __iomem *ar71xx_gpio_base; + +static inline void ar71xx_gpio_wr(unsigned reg, u32 value) +{ + __raw_writel(value, ar71xx_gpio_base + reg); +} + +static inline u32 ar71xx_gpio_rr(unsigned reg) +{ + return __raw_readl(ar71xx_gpio_base + reg); +} + +void ar71xx_gpio_init(void) __init; +void ar71xx_gpio_function_enable(u32 mask); +void ar71xx_gpio_function_disable(u32 mask); +void ar71xx_gpio_function_setup(u32 set, u32 clear); +void ar71xx_gpio_output_select(unsigned gpio, u8 val); + +/* + * DDR_CTRL block + */ +#define AR71XX_DDR_REG_PCI_WIN0 0x7c +#define AR71XX_DDR_REG_PCI_WIN1 0x80 +#define AR71XX_DDR_REG_PCI_WIN2 0x84 +#define AR71XX_DDR_REG_PCI_WIN3 0x88 +#define AR71XX_DDR_REG_PCI_WIN4 0x8c +#define AR71XX_DDR_REG_PCI_WIN5 0x90 +#define AR71XX_DDR_REG_PCI_WIN6 0x94 +#define AR71XX_DDR_REG_PCI_WIN7 0x98 +#define AR71XX_DDR_REG_FLUSH_GE0 0x9c +#define AR71XX_DDR_REG_FLUSH_GE1 0xa0 +#define AR71XX_DDR_REG_FLUSH_USB 0xa4 +#define AR71XX_DDR_REG_FLUSH_PCI 0xa8 + +#define AR724X_DDR_REG_FLUSH_GE0 0x7c +#define AR724X_DDR_REG_FLUSH_GE1 0x80 +#define AR724X_DDR_REG_FLUSH_USB 0x84 +#define AR724X_DDR_REG_FLUSH_PCIE 0x88 + +#define AR91XX_DDR_REG_FLUSH_GE0 0x7c +#define AR91XX_DDR_REG_FLUSH_GE1 0x80 +#define AR91XX_DDR_REG_FLUSH_USB 0x84 +#define AR91XX_DDR_REG_FLUSH_WMAC 0x88 + +#define AR933X_DDR_REG_FLUSH_GE0 0x7c +#define AR933X_DDR_REG_FLUSH_GE1 0x80 +#define AR933X_DDR_REG_FLUSH_USB 0x84 +#define AR933X_DDR_REG_FLUSH_WMAC 0x88 + +#define AR934X_DDR_REG_FLUSH_GE0 0x9c +#define AR934X_DDR_REG_FLUSH_GE1 0xa0 +#define AR934X_DDR_REG_FLUSH_USB 0xa4 +#define AR934X_DDR_REG_FLUSH_PCIE 0xa8 +#define AR934X_DDR_REG_FLUSH_WMAC 0xac + + +#define PCI_WIN0_OFFS 0x10000000 +#define PCI_WIN1_OFFS 0x11000000 +#define PCI_WIN2_OFFS 0x12000000 +#define PCI_WIN3_OFFS 0x13000000 +#define PCI_WIN4_OFFS 0x14000000 +#define PCI_WIN5_OFFS 0x15000000 +#define PCI_WIN6_OFFS 0x16000000 +#define PCI_WIN7_OFFS 0x07000000 + +extern void __iomem *ar71xx_ddr_base; + +static inline void ar71xx_ddr_wr(unsigned reg, u32 val) +{ + __raw_writel(val, ar71xx_ddr_base + reg); +} + +static inline u32 ar71xx_ddr_rr(unsigned reg) +{ + return __raw_readl(ar71xx_ddr_base + reg); +} + +void ar71xx_ddr_flush(u32 reg); + +/* + * PCI block + */ +#define AR71XX_PCI_CFG_BASE (AR71XX_PCI_MEM_BASE + PCI_WIN7_OFFS + 0x10000) +#define AR71XX_PCI_CFG_SIZE 0x100 + +#define PCI_REG_CRP_AD_CBE 0x00 +#define PCI_REG_CRP_WRDATA 0x04 +#define PCI_REG_CRP_RDDATA 0x08 +#define PCI_REG_CFG_AD 0x0c +#define PCI_REG_CFG_CBE 0x10 +#define PCI_REG_CFG_WRDATA 0x14 +#define PCI_REG_CFG_RDDATA 0x18 +#define PCI_REG_PCI_ERR 0x1c +#define PCI_REG_PCI_ERR_ADDR 0x20 +#define PCI_REG_AHB_ERR 0x24 +#define PCI_REG_AHB_ERR_ADDR 0x28 + +#define PCI_CRP_CMD_WRITE 0x00010000 +#define PCI_CRP_CMD_READ 0x00000000 +#define PCI_CFG_CMD_READ 0x0000000a +#define PCI_CFG_CMD_WRITE 0x0000000b + +#define PCI_IDSEL_ADL_START 17 + +#define AR724X_PCI_CFG_BASE (AR71XX_PCI_MEM_BASE + 0x4000000) +#define AR724X_PCI_CFG_SIZE 0x1000 + +#define AR724X_PCI_REG_APP 0x00 +#define AR724X_PCI_REG_RESET 0x18 +#define AR724X_PCI_REG_INT_STATUS 0x4c +#define AR724X_PCI_REG_INT_MASK 0x50 + +#define AR724X_PCI_APP_LTSSM_ENABLE BIT(0) +#define AR724X_PCI_RESET_LINK_UP BIT(0) + +#define AR724X_PCI_INT_DEV0 BIT(14) + +/* + * RESET block + */ +#define AR71XX_RESET_REG_TIMER 0x00 +#define AR71XX_RESET_REG_TIMER_RELOAD 0x04 +#define AR71XX_RESET_REG_WDOG_CTRL 0x08 +#define AR71XX_RESET_REG_WDOG 0x0c +#define AR71XX_RESET_REG_MISC_INT_STATUS 0x10 +#define AR71XX_RESET_REG_MISC_INT_ENABLE 0x14 +#define AR71XX_RESET_REG_PCI_INT_STATUS 0x18 +#define AR71XX_RESET_REG_PCI_INT_ENABLE 0x1c +#define AR71XX_RESET_REG_GLOBAL_INT_STATUS 0x20 +#define AR71XX_RESET_REG_RESET_MODULE 0x24 +#define AR71XX_RESET_REG_PERFC_CTRL 0x2c +#define AR71XX_RESET_REG_PERFC0 0x30 +#define AR71XX_RESET_REG_PERFC1 0x34 +#define AR71XX_RESET_REG_REV_ID 0x90 + +#define AR91XX_RESET_REG_GLOBAL_INT_STATUS 0x18 +#define AR91XX_RESET_REG_RESET_MODULE 0x1c +#define AR91XX_RESET_REG_PERF_CTRL 0x20 +#define AR91XX_RESET_REG_PERFC0 0x24 +#define AR91XX_RESET_REG_PERFC1 0x28 + +#define AR724X_RESET_REG_RESET_MODULE 0x1c + +#define AR933X_RESET_REG_RESET_MODULE 0x1c +#define AR933X_RESET_REG_BOOTSTRAP 0xac +#define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18) +#define AR933X_BOOTSTRAP_EEPBUSY BIT(4) +#define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0) + +#define AR934X_RESET_REG_RESET_MODULE 0x1c + +#define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac +#define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0) +#define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1) +#define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2) +#define AR934X_PCIE_WMAC_INT_WMAC_RXHP BIT(3) +#define AR934X_PCIE_WMAC_INT_PCIE_RC BIT(4) +#define AR934X_PCIE_WMAC_INT_PCIE_RC0 BIT(5) +#define AR934X_PCIE_WMAC_INT_PCIE_RC1 BIT(6) +#define AR934X_PCIE_WMAC_INT_PCIE_RC2 BIT(7) +#define AR934X_PCIE_WMAC_INT_PCIE_RC3 BIT(8) +#define AR934X_PCIE_WMAC_INT_WMAC_ALL \ + (AR934X_PCIE_WMAC_INT_WMAC_MISC | AR934X_PCIE_WMAC_INT_WMAC_TX | \ + AR934X_PCIE_WMAC_INT_WMAC_RXLP | AR934X_PCIE_WMAC_INT_WMAC_RXHP) + +#define AR934X_PCIE_WMAC_INT_PCIE_ALL \ + (AR934X_PCIE_WMAC_INT_PCIE_RC | AR934X_PCIE_WMAC_INT_PCIE_RC0 | \ + AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \ + AR934X_PCIE_WMAC_INT_PCIE_RC3) + +#define AR934X_RESET_REG_BOOTSTRAP 0xb0 +#define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23) +#define AR934X_BOOTSTRAP_SW_OPTION7 BIT(22) +#define AR934X_BOOTSTRAP_SW_OPTION6 BIT(21) +#define AR934X_BOOTSTRAP_SW_OPTION5 BIT(20) +#define AR934X_BOOTSTRAP_SW_OPTION4 BIT(19) +#define AR934X_BOOTSTRAP_SW_OPTION3 BIT(18) +#define AR934X_BOOTSTRAP_SW_OPTION2 BIT(17) +#define AR934X_BOOTSTRAP_SW_OPTION1 BIT(16) +#define AR934X_BOOTSTRAP_USB_MODE_DEVICE BIT(7) +#define AR934X_BOOTSTRAP_PCIE_RC BIT(6) +#define AR934X_BOOTSTRAP_EJTAG_MODE BIT(5) +#define AR934X_BOOTSTRAP_REF_CLK_40 BIT(4) +#define AR934X_BOOTSTRAP_BOOT_FROM_SPI BIT(2) +#define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1) +#define AR934X_BOOTSTRAP_DDR1 BIT(0) + +#define WDOG_CTRL_LAST_RESET BIT(31) +#define WDOG_CTRL_ACTION_MASK 3 +#define WDOG_CTRL_ACTION_NONE 0 /* no action */ +#define WDOG_CTRL_ACTION_GPI 1 /* general purpose interrupt */ +#define WDOG_CTRL_ACTION_NMI 2 /* NMI */ +#define WDOG_CTRL_ACTION_FCR 3 /* full chip reset */ + +#define MISC_INT_ENET_LINK BIT(12) +#define MISC_INT_DDR_PERF BIT(11) +#define MISC_INT_TIMER4 BIT(10) +#define MISC_INT_TIMER3 BIT(9) +#define MISC_INT_TIMER2 BIT(8) +#define MISC_INT_DMA BIT(7) +#define MISC_INT_OHCI BIT(6) +#define MISC_INT_PERFC BIT(5) +#define MISC_INT_WDOG BIT(4) +#define MISC_INT_UART BIT(3) +#define MISC_INT_GPIO BIT(2) +#define MISC_INT_ERROR BIT(1) +#define MISC_INT_TIMER BIT(0) + +#define PCI_INT_CORE BIT(4) +#define PCI_INT_DEV2 BIT(2) +#define PCI_INT_DEV1 BIT(1) +#define PCI_INT_DEV0 BIT(0) + +#define RESET_MODULE_EXTERNAL BIT(28) +#define RESET_MODULE_FULL_CHIP BIT(24) +#define RESET_MODULE_AMBA2WMAC BIT(22) +#define RESET_MODULE_CPU_NMI BIT(21) +#define RESET_MODULE_CPU_COLD BIT(20) +#define RESET_MODULE_DMA BIT(19) +#define RESET_MODULE_SLIC BIT(18) +#define RESET_MODULE_STEREO BIT(17) +#define RESET_MODULE_DDR BIT(16) +#define RESET_MODULE_GE1_MAC BIT(13) +#define RESET_MODULE_GE1_PHY BIT(12) +#define RESET_MODULE_USBSUS_OVERRIDE BIT(10) +#define RESET_MODULE_GE0_MAC BIT(9) +#define RESET_MODULE_GE0_PHY BIT(8) +#define RESET_MODULE_USB_OHCI_DLL BIT(6) +#define RESET_MODULE_USB_HOST BIT(5) +#define RESET_MODULE_USB_PHY BIT(4) +#define RESET_MODULE_USB_OHCI_DLL_7240 BIT(3) +#define RESET_MODULE_PCI_BUS BIT(1) +#define RESET_MODULE_PCI_CORE BIT(0) + +#define AR724X_RESET_GE1_MDIO BIT(23) +#define AR724X_RESET_GE0_MDIO BIT(22) +#define AR724X_RESET_PCIE_PHY_SERIAL BIT(10) +#define AR724X_RESET_PCIE_PHY BIT(7) +#define AR724X_RESET_PCIE BIT(6) +#define AR724X_RESET_USB_HOST BIT(5) +#define AR724X_RESET_USB_PHY BIT(4) +#define AR724X_RESET_USBSUS_OVERRIDE BIT(3) + +#define AR933X_RESET_WMAC BIT(11) +#define AR933X_RESET_GE1_MDIO BIT(23) +#define AR933X_RESET_GE0_MDIO BIT(22) +#define AR933X_RESET_GE1_MAC BIT(13) +#define AR933X_RESET_GE0_MAC BIT(9) +#define AR933X_RESET_USB_HOST BIT(5) +#define AR933X_RESET_USB_PHY BIT(4) +#define AR933X_RESET_USBSUS_OVERRIDE BIT(3) + +#define AR934X_RESET_HOST BIT(31) +#define AR934X_RESET_SLIC BIT(30) +#define AR934X_RESET_HDMA BIT(29) +#define AR934X_RESET_EXTERNAL BIT(28) +#define AR934X_RESET_RTC BIT(27) +#define AR934X_RESET_PCIE_EP_INT BIT(26) +#define AR934X_RESET_CHKSUM_ACC BIT(25) +#define AR934X_RESET_FULL_CHIP BIT(24) +#define AR934X_RESET_GE1_MDIO BIT(23) +#define AR934X_RESET_GE0_MDIO BIT(22) +#define AR934X_RESET_CPU_NMI BIT(21) +#define AR934X_RESET_CPU_COLD BIT(20) +#define AR934X_RESET_HOST_RESET_INT BIT(19) +#define AR934X_RESET_PCIE_EP BIT(18) +#define AR934X_RESET_UART1 BIT(17) +#define AR934X_RESET_DDR BIT(16) +#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15) +#define AR934X_RESET_NANDF BIT(14) +#define AR934X_RESET_GE1_MAC BIT(13) +#define AR934X_RESET_ETH_SWITCH_ANALOG BIT(12) +#define AR934X_RESET_USB_PHY_ANALOG BIT(11) +#define AR934X_RESET_HOST_DMA_INT BIT(10) +#define AR934X_RESET_GE0_MAC BIT(9) +#define AR934X_RESET_ETH_SIWTCH BIT(8) +#define AR934X_RESET_PCIE_PHY BIT(7) +#define AR934X_RESET_PCIE BIT(6) +#define AR934X_RESET_USB_HOST BIT(5) +#define AR934X_RESET_USB_PHY BIT(4) +#define AR934X_RESET_USBSUS_OVERRIDE BIT(3) +#define AR934X_RESET_LUT BIT(2) +#define AR934X_RESET_MBOX BIT(1) +#define AR934X_RESET_I2S BIT(0) + +#define REV_ID_MAJOR_MASK 0xfff0 +#define REV_ID_MAJOR_AR71XX 0x00a0 +#define REV_ID_MAJOR_AR913X 0x00b0 +#define REV_ID_MAJOR_AR7240 0x00c0 +#define REV_ID_MAJOR_AR7241 0x0100 +#define REV_ID_MAJOR_AR7242 0x1100 +#define REV_ID_MAJOR_AR9330 0x0110 +#define REV_ID_MAJOR_AR9331 0x1110 +#define REV_ID_MAJOR_AR9341 0x0120 +#define REV_ID_MAJOR_AR9342 0x1120 +#define REV_ID_MAJOR_AR9344 0x2120 + +#define AR71XX_REV_ID_MINOR_MASK 0x3 +#define AR71XX_REV_ID_MINOR_AR7130 0x0 +#define AR71XX_REV_ID_MINOR_AR7141 0x1 +#define AR71XX_REV_ID_MINOR_AR7161 0x2 +#define AR71XX_REV_ID_REVISION_MASK 0x3 +#define AR71XX_REV_ID_REVISION_SHIFT 2 + +#define AR91XX_REV_ID_MINOR_MASK 0x3 +#define AR91XX_REV_ID_MINOR_AR9130 0x0 +#define AR91XX_REV_ID_MINOR_AR9132 0x1 +#define AR91XX_REV_ID_REVISION_MASK 0x3 +#define AR91XX_REV_ID_REVISION_SHIFT 2 + +#define AR724X_REV_ID_REVISION_MASK 0x3 + +#define AR933X_REV_ID_REVISION_MASK 0xf + +#define AR934X_REV_ID_REVISION_MASK 0xf + +extern void __iomem *ar71xx_reset_base; + +static inline void ar71xx_reset_wr(unsigned reg, u32 val) +{ + __raw_writel(val, ar71xx_reset_base + reg); +} + +static inline u32 ar71xx_reset_rr(unsigned reg) +{ + return __raw_readl(ar71xx_reset_base + reg); +} + +void ar71xx_device_stop(u32 mask); +void ar71xx_device_start(u32 mask); +void ar71xx_device_reset_rmw(u32 clear, u32 set); +int ar71xx_device_stopped(u32 mask); + +/* + * SPI block + */ +#define SPI_REG_FS 0x00 /* Function Select */ +#define SPI_REG_CTRL 0x04 /* SPI Control */ +#define SPI_REG_IOC 0x08 /* SPI I/O Control */ +#define SPI_REG_RDS 0x0c /* Read Data Shift */ + +#define SPI_FS_GPIO BIT(0) /* Enable GPIO mode */ + +#define SPI_CTRL_RD BIT(6) /* Remap Disable */ +#define SPI_CTRL_DIV_MASK 0x3f + +#define SPI_IOC_DO BIT(0) /* Data Out pin */ +#define SPI_IOC_CLK BIT(8) /* CLK pin */ +#define SPI_IOC_CS(n) BIT(16 + (n)) +#define SPI_IOC_CS0 SPI_IOC_CS(0) +#define SPI_IOC_CS1 SPI_IOC_CS(1) +#define SPI_IOC_CS2 SPI_IOC_CS(2) +#define SPI_IOC_CS_ALL (SPI_IOC_CS0 | SPI_IOC_CS1 | SPI_IOC_CS2) + +void ar71xx_flash_acquire(void); +void ar71xx_flash_release(void); + +/* + * MII_CTRL block + */ +#define MII_REG_MII0_CTRL 0x00 +#define MII_REG_MII1_CTRL 0x04 + +#define MII_CTRL_IF_MASK 3 +#define MII_CTRL_SPEED_SHIFT 4 +#define MII_CTRL_SPEED_MASK 3 +#define MII_CTRL_SPEED_10 0 +#define MII_CTRL_SPEED_100 1 +#define MII_CTRL_SPEED_1000 2 + +#define MII0_CTRL_IF_GMII 0 +#define MII0_CTRL_IF_MII 1 +#define MII0_CTRL_IF_RGMII 2 +#define MII0_CTRL_IF_RMII 3 + +#define MII1_CTRL_IF_RGMII 0 +#define MII1_CTRL_IF_RMII 1 + +/* + * AR933X GMAC + */ +#define AR933X_GMAC_REG_ETH_CFG 0x00 + +#define AR933X_ETH_CFG_RGMII_GE0 BIT(0) +#define AR933X_ETH_CFG_MII_GE0 BIT(1) +#define AR933X_ETH_CFG_GMII_GE0 BIT(2) +#define AR933X_ETH_CFG_MII_GE0_MASTER BIT(3) +#define AR933X_ETH_CFG_MII_GE0_SLAVE BIT(4) +#define AR933X_ETH_CFG_MII_GE0_ERR_EN BIT(5) +#define AR933X_ETH_CFG_SW_PHY_SWAP BIT(7) +#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(8) +#define AR933X_ETH_CFG_RMII_GE0 BIT(9) +#define AR933X_ETH_CFG_RMII_GE0_SPD_10 0 +#define AR933X_ETH_CFG_RMII_GE0_SPD_100 BIT(10) + +/* + * AR934X GMAC Interface + */ +#define AR934X_GMAC_REG_ETH_CFG 0x00 + +#define AR934X_ETH_CFG_RGMII_GMAC0 BIT(0) +#define AR934X_ETH_CFG_MII_GMAC0 BIT(1) +#define AR934X_ETH_CFG_GMII_GMAC0 BIT(2) +#define AR934X_ETH_CFG_MII_GMAC0_MASTER BIT(3) +#define AR934X_ETH_CFG_MII_GMAC0_SLAVE BIT(4) +#define AR934X_ETH_CFG_MII_GMAC0_ERR_EN BIT(5) +#define AR934X_ETH_CFG_SW_ONLY_MODE BIT(6) +#define AR934X_ETH_CFG_SW_PHY_SWAP BIT(7) +#define AR934X_ETH_CFG_SW_APB_ACCESS BIT(9) +#define AR934X_ETH_CFG_RMII_GMAC0 BIT(10) +#define AR933X_ETH_CFG_MII_CNTL_SPEED BIT(11) +#define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12) +#define AR933X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13) + +#endif /* __ASSEMBLER__ */ + +#endif /* __ASM_MACH_AR71XX_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/ar91xx_flash.h b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/ar91xx_flash.h new file mode 100644 index 000000000..05a93ecd9 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/ar91xx_flash.h @@ -0,0 +1,26 @@ +/* + * AR91xx parallel flash driver platform data definitions + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __AR91XX_FLASH_H +#define __AR91XX_FLASH_H + +struct mtd_partition; + +struct ar91xx_flash_platform_data { + unsigned int width; + u8 is_shared:1; +#ifdef CONFIG_MTD_PARTITIONS + unsigned int nr_parts; + struct mtd_partition *parts; +#endif +}; + +#endif /* __AR91XX_FLASH_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/ar933x_uart.h b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/ar933x_uart.h new file mode 100644 index 000000000..527305559 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/ar933x_uart.h @@ -0,0 +1,67 @@ +/* + * Atheros AR933X UART defines + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __AR933X_UART_H +#define __AR933X_UART_H + +#define AR933X_UART_REGS_SIZE 20 +#define AR933X_UART_FIFO_SIZE 16 + +#define AR933X_UART_DATA_REG 0x00 +#define AR933X_UART_CS_REG 0x04 +#define AR933X_UART_CLOCK_REG 0x08 +#define AR933X_UART_INT_REG 0x0c +#define AR933X_UART_INT_EN_REG 0x10 + +#define AR933X_UART_DATA_TX_RX_MASK 0xff +#define AR933X_UART_DATA_RX_CSR BIT(8) +#define AR933X_UART_DATA_TX_CSR BIT(9) + +#define AR933X_UART_CS_PARITY_S 0 +#define AR933X_UART_CS_PARITY_M 0x3 +#define AR933X_UART_CS_PARITY_NONE 0 +#define AR933X_UART_CS_PARITY_ODD 1 +#define AR933X_UART_CS_PARITY_EVEN 2 +#define AR933X_UART_CS_IF_MODE_S 2 +#define AR933X_UART_CS_IF_MODE_M 0x3 +#define AR933X_UART_CS_IF_MODE_NONE 0 +#define AR933X_UART_CS_IF_MODE_DTE 1 +#define AR933X_UART_CS_IF_MODE_DCE 2 +#define AR933X_UART_CS_FLOW_CTRL_S 4 +#define AR933X_UART_CS_FLOW_CTRL_M 0x3 +#define AR933X_UART_CS_DMA_EN BIT(6) +#define AR933X_UART_CS_TX_READY_ORIDE BIT(7) +#define AR933X_UART_CS_RX_READY_ORIDE BIT(8) +#define AR933X_UART_CS_TX_READY BIT(9) +#define AR933X_UART_CS_RX_BREAK BIT(10) +#define AR933X_UART_CS_TX_BREAK BIT(11) +#define AR933X_UART_CS_HOST_INT BIT(12) +#define AR933X_UART_CS_HOST_INT_EN BIT(13) +#define AR933X_UART_CS_TX_BUSY BIT(14) +#define AR933X_UART_CS_RX_BUSY BIT(15) + +#define AR933X_UART_CLOCK_STEP_M 0xffff +#define AR933X_UART_CLOCK_SCALE_M 0xfff +#define AR933X_UART_CLOCK_SCALE_S 16 +#define AR933X_UART_CLOCK_STEP_M 0xffff + +#define AR933X_UART_INT_RX_VALID BIT(0) +#define AR933X_UART_INT_TX_READY BIT(1) +#define AR933X_UART_INT_RX_FRAMING_ERR BIT(2) +#define AR933X_UART_INT_RX_OFLOW_ERR BIT(3) +#define AR933X_UART_INT_TX_OFLOW_ERR BIT(4) +#define AR933X_UART_INT_RX_PARITY_ERR BIT(5) +#define AR933X_UART_INT_RX_BREAK_ON BIT(6) +#define AR933X_UART_INT_RX_BREAK_OFF BIT(7) +#define AR933X_UART_INT_RX_FULL BIT(8) +#define AR933X_UART_INT_TX_EMPTY BIT(9) +#define AR933X_UART_INT_ALLINTS 0x3ff + +#endif /* __AR933X_UART_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/ar933x_uart_platform.h b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/ar933x_uart_platform.h new file mode 100644 index 000000000..6cb30f2b7 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/ar933x_uart_platform.h @@ -0,0 +1,18 @@ +/* + * Platform data definition for Atheros AR933X UART + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _AR933X_UART_PLATFORM_H +#define _AR933X_UART_PLATFORM_H + +struct ar933x_uart_platform_data { + unsigned uartclk; +}; + +#endif /* _AR933X_UART_PLATFORM_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/cpu-feature-overrides.h b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/cpu-feature-overrides.h new file mode 100644 index 000000000..d3560e59b --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/cpu-feature-overrides.h @@ -0,0 +1,56 @@ +/* + * Atheros AR71xx specific CPU feature overrides + * + * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This file was derived from: include/asm-mips/cpu-features.h + * Copyright (C) 2003, 2004 Ralf Baechle + * Copyright (C) 2004 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ +#ifndef __ASM_MACH_AR71XX_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_AR71XX_CPU_FEATURE_OVERRIDES_H + +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_3k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_tx39_cache 0 +#define cpu_has_sb1_cache 0 +#define cpu_has_fpu 0 +#define cpu_has_32fpr 0 +#define cpu_has_counter 1 +#define cpu_has_watch 1 +#define cpu_has_divec 1 + +#define cpu_has_prefetch 1 +#define cpu_has_ejtag 1 +#define cpu_has_llsc 1 + +#define cpu_has_mips16 1 +#define cpu_has_mdmx 0 +#define cpu_has_mips3d 0 +#define cpu_has_smartmips 0 + +#define cpu_has_mips32r1 1 +#define cpu_has_mips32r2 1 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#define cpu_has_dsp 0 +#define cpu_has_mipsmt 0 + +#define cpu_has_64bits 0 +#define cpu_has_64bit_zero_reg 0 +#define cpu_has_64bit_gp_regs 0 +#define cpu_has_64bit_addresses 0 + +#define cpu_dcache_line_size() 32 +#define cpu_icache_line_size() 32 + +#endif /* __ASM_MACH_AR71XX_CPU_FEATURE_OVERRIDES_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/gpio.h b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/gpio.h new file mode 100644 index 000000000..56fe902e2 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/gpio.h @@ -0,0 +1,43 @@ +/* + * Atheros AR71xx GPIO API definitions + * + * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef __ASM_MACH_AR71XX_GPIO_H +#define __ASM_MACH_AR71XX_GPIO_H + +#define ARCH_NR_GPIOS 64 +#include <asm-generic/gpio.h> + +extern unsigned long ar71xx_gpio_count; +extern void __ar71xx_gpio_set_value(unsigned gpio, int value); +extern int __ar71xx_gpio_get_value(unsigned gpio); +int gpio_to_irq(unsigned gpio); +int irq_to_gpio(unsigned gpio); + +static inline int gpio_get_value(unsigned gpio) +{ + if (gpio < ar71xx_gpio_count) + return __ar71xx_gpio_get_value(gpio); + + return __gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + if (gpio < ar71xx_gpio_count) + __ar71xx_gpio_set_value(gpio, value); + else + __gpio_set_value(gpio, value); +} + +#define gpio_cansleep __gpio_cansleep + +#endif /* __ASM_MACH_AR71XX_GPIO_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/irq.h b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/irq.h new file mode 100644 index 000000000..c61d9c73f --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/irq.h @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ +#ifndef __ASM_MACH_AR71XX_IRQ_H +#define __ASM_MACH_AR71XX_IRQ_H + +#define MIPS_CPU_IRQ_BASE 0 +#define NR_IRQS 80 + +#include_next <irq.h> + +#endif /* __ASM_MACH_AR71XX_IRQ_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/kernel-entry-init.h b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/kernel-entry-init.h new file mode 100644 index 000000000..948d28034 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/kernel-entry-init.h @@ -0,0 +1,32 @@ +/* + * Atheros AR71xx specific kernel entry setup + * + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ +#ifndef __ASM_MACH_AR71XX_KERNEL_ENTRY_H +#define __ASM_MACH_AR71XX_KERNEL_ENTRY_H + + /* + * Some bootloaders set the 'Kseg0 coherency algorithm' to + * 'Cacheable, noncoherent, write-through, no write allocate' + * and this cause performance issues. Let's go and change it to + * 'Cacheable, noncoherent, write-back, write allocate' + */ + .macro kernel_entry_setup + mfc0 t0, CP0_CONFIG + li t1, ~CONF_CM_CMASK + and t0, t1 + ori t0, CONF_CM_CACHABLE_NONCOHERENT + mtc0 t0, CP0_CONFIG + nop + .endm + + .macro smp_slave_setup + .endm + +#endif /* __ASM_MACH_AR71XX_KERNEL_ENTRY_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/mach-rb750.h b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/mach-rb750.h new file mode 100644 index 000000000..661ba4ec7 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/mach-rb750.h @@ -0,0 +1,66 @@ +/* + * MikroTik RouterBOARD 750 definitions + * + * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ +#ifndef _MACH_RB750_H +#define _MACH_RB750_H + +#include <linux/bitops.h> + +#define RB750_GPIO_LVC573_LE 0 /* Latch enable on LVC573 */ +#define RB750_GPIO_NAND_IO0 1 /* NAND I/O 0 */ +#define RB750_GPIO_NAND_IO1 2 /* NAND I/O 1 */ +#define RB750_GPIO_NAND_IO2 3 /* NAND I/O 2 */ +#define RB750_GPIO_NAND_IO3 4 /* NAND I/O 3 */ +#define RB750_GPIO_NAND_IO4 5 /* NAND I/O 4 */ +#define RB750_GPIO_NAND_IO5 6 /* NAND I/O 5 */ +#define RB750_GPIO_NAND_IO6 7 /* NAND I/O 6 */ +#define RB750_GPIO_NAND_IO7 8 /* NAND I/O 7 */ +#define RB750_GPIO_NAND_NCE 11 /* NAND Chip Enable (active low) */ +#define RB750_GPIO_NAND_RDY 12 /* NAND Ready */ +#define RB750_GPIO_NAND_CLE 14 /* NAND Command Latch Enable */ +#define RB750_GPIO_NAND_ALE 15 /* NAND Address Latch Enable */ +#define RB750_GPIO_NAND_NRE 16 /* NAND Read Enable (active low) */ +#define RB750_GPIO_NAND_NWE 17 /* NAND Write Enable (active low) */ + +#define RB750_GPIO_BTN_RESET 1 +#define RB750_GPIO_SPI_CS0 2 +#define RB750_GPIO_LED_ACT 12 +#define RB750_GPIO_LED_PORT1 13 +#define RB750_GPIO_LED_PORT2 14 +#define RB750_GPIO_LED_PORT3 15 +#define RB750_GPIO_LED_PORT4 16 +#define RB750_GPIO_LED_PORT5 17 + +#define RB750_LED_ACT BIT(RB750_GPIO_LED_ACT) +#define RB750_LED_PORT1 BIT(RB750_GPIO_LED_PORT1) +#define RB750_LED_PORT2 BIT(RB750_GPIO_LED_PORT2) +#define RB750_LED_PORT3 BIT(RB750_GPIO_LED_PORT3) +#define RB750_LED_PORT4 BIT(RB750_GPIO_LED_PORT4) +#define RB750_LED_PORT5 BIT(RB750_GPIO_LED_PORT5) + +#define RB750_LVC573_LE BIT(RB750_GPIO_LVC573_LE) + +#define RB750_LED_BITS (RB750_LED_PORT1 | RB750_LED_PORT2 | RB750_LED_PORT3 | \ + RB750_LED_PORT4 | RB750_LED_PORT5 | RB750_LED_ACT) + +struct rb750_led_data { + char *name; + char *default_trigger; + u32 mask; + int active_low; +}; + +struct rb750_led_platform_data { + int num_leds; + struct rb750_led_data *leds; +}; + +int rb750_latch_change(u32 mask_clr, u32 mask_set); + +#endif /* _MACH_RB750_H */
\ No newline at end of file diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/mangle-port.h b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/mangle-port.h new file mode 100644 index 000000000..ba41b38b9 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/mangle-port.h @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h + * Copyright (C) 2003, 2004 Ralf Baechle + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __ASM_MACH_AR71XX_MANGLE_PORT_H +#define __ASM_MACH_AR71XX_MANGLE_PORT_H + +#define __swizzle_addr_b(port) ((port) ^ 3) +#define __swizzle_addr_w(port) ((port) ^ 2) +#define __swizzle_addr_l(port) (port) +#define __swizzle_addr_q(port) (port) + +#if defined(CONFIG_SWAP_IO_SPACE) + +# define ioswabb(a, x) (x) +# define __mem_ioswabb(a, x) (x) +# define ioswabw(a, x) le16_to_cpu(x) +# define __mem_ioswabw(a, x) (x) +# define ioswabl(a, x) le32_to_cpu(x) +# define __mem_ioswabl(a, x) (x) +# define ioswabq(a, x) le64_to_cpu(x) +# define __mem_ioswabq(a, x) (x) + +#else + +# define ioswabb(a, x) (x) +# define __mem_ioswabb(a, x) (x) +# define ioswabw(a, x) (x) +# define __mem_ioswabw(a, x) cpu_to_le16(x) +# define ioswabl(a, x) (x) +# define __mem_ioswabl(a, x) cpu_to_le32(x) +# define ioswabq(a, x) (x) +# define __mem_ioswabq(a, x) cpu_to_le64(x) + +#endif + +#endif /* __ASM_MACH_AR71XX_MANGLE_PORT_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/pci.h b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/pci.h new file mode 100644 index 000000000..27043491a --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/pci.h @@ -0,0 +1,46 @@ +/* + * Atheros AR71xx SoC specific PCI definitions + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __ASM_MACH_AR71XX_PCI_H +#define __ASM_MACH_AR71XX_PCI_H + +struct pci_dev; + +struct ar71xx_pci_irq { + int irq; + u8 slot; + u8 pin; +}; + +#ifdef CONFIG_PCI +extern int (*ar71xx_pci_plat_dev_init)(struct pci_dev *dev); +extern unsigned ar71xx_pci_nr_irqs __initdata; +extern struct ar71xx_pci_irq *ar71xx_pci_irq_map __initdata; + +int ar71xx_pcibios_map_irq(const struct pci_dev *dev, + uint8_t slot, uint8_t pin) __init; +int ar71xx_pcibios_init(void) __init; + +int ar71xx_pci_be_handler(int is_fixup); + +int ar724x_pcibios_map_irq(const struct pci_dev *dev, + uint8_t slot, uint8_t pin) __init; +int ar724x_pcibios_init(int irq) __init; + +int ar71xx_pci_init(unsigned nr_irqs, struct ar71xx_pci_irq *map) __init; +#else +static inline int ar71xx_pci_init(unsigned nr_irqs, struct ar71xx_pci_irq *map) +{ + return 0; +} +#endif + +#endif /* __ASM_MACH_AR71XX_PCI_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/platform.h b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/platform.h new file mode 100644 index 000000000..206c4d750 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/platform.h @@ -0,0 +1,67 @@ +/* + * Atheros AR71xx SoC specific platform data definitions + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __ASM_MACH_AR71XX_PLATFORM_H +#define __ASM_MACH_AR71XX_PLATFORM_H + +#include <linux/if_ether.h> +#include <linux/skbuff.h> +#include <linux/phy.h> +#include <linux/spi/spi.h> + +struct ag71xx_switch_platform_data { + u8 phy4_mii_en:1; +}; + +struct ag71xx_platform_data { + phy_interface_t phy_if_mode; + u32 phy_mask; + int speed; + int duplex; + u32 reset_bit; + u8 mac_addr[ETH_ALEN]; + struct device *mii_bus_dev; + + u8 has_gbit:1; + u8 is_ar91xx:1; + u8 is_ar7240:1; + u8 is_ar724x:1; + u8 has_ar8216:1; + + struct ag71xx_switch_platform_data *switch_data; + + void (*ddr_flush)(void); + void (*set_speed)(int speed); + + u32 fifo_cfg1; + u32 fifo_cfg2; + u32 fifo_cfg3; +}; + +struct ag71xx_mdio_platform_data { + u32 phy_mask; + int is_ar7240; +}; + +struct ar71xx_ehci_platform_data { + u8 is_ar91xx; +}; + +struct ar71xx_spi_platform_data { + unsigned bus_num; + unsigned num_chipselect; + u32 (*get_ioc_base)(u8 chip_select, int cs_high, int is_on); +}; + +#define AR71XX_SPI_CS_INACTIVE 0 +#define AR71XX_SPI_CS_ACTIVE 1 + +#endif /* __ASM_MACH_AR71XX_PLATFORM_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/rb4xx_cpld.h b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/rb4xx_cpld.h new file mode 100644 index 000000000..5b17e94b6 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/rb4xx_cpld.h @@ -0,0 +1,48 @@ +/* + * SPI driver definitions for the CPLD chip on the Mikrotik RB4xx boards + * + * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> + * + * This file was based on the patches for Linux 2.6.27.39 published by + * MikroTik for their RouterBoard 4xx series devices. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#define CPLD_GPIO_nLED1 0 +#define CPLD_GPIO_nLED2 1 +#define CPLD_GPIO_nLED3 2 +#define CPLD_GPIO_nLED4 3 +#define CPLD_GPIO_FAN 4 +#define CPLD_GPIO_ALE 5 +#define CPLD_GPIO_CLE 6 +#define CPLD_GPIO_nCE 7 +#define CPLD_GPIO_nLED5 8 + +#define CPLD_NUM_GPIOS 9 + +#define CPLD_CFG_nLED1 BIT(CPLD_GPIO_nLED1) +#define CPLD_CFG_nLED2 BIT(CPLD_GPIO_nLED2) +#define CPLD_CFG_nLED3 BIT(CPLD_GPIO_nLED3) +#define CPLD_CFG_nLED4 BIT(CPLD_GPIO_nLED4) +#define CPLD_CFG_FAN BIT(CPLD_GPIO_FAN) +#define CPLD_CFG_ALE BIT(CPLD_GPIO_ALE) +#define CPLD_CFG_CLE BIT(CPLD_GPIO_CLE) +#define CPLD_CFG_nCE BIT(CPLD_GPIO_nCE) +#define CPLD_CFG_nLED5 BIT(CPLD_GPIO_nLED5) + +struct rb4xx_cpld_platform_data { + unsigned gpio_base; +}; + +extern int rb4xx_cpld_change_cfg(unsigned mask, unsigned value); +extern int rb4xx_cpld_read(unsigned char *rx_buf, + const unsigned char *verify_buf, + unsigned cnt); +extern int rb4xx_cpld_read_from(unsigned addr, + unsigned char *rx_buf, + const unsigned char *verify_buf, + unsigned cnt); +extern int rb4xx_cpld_write(const unsigned char *buf, unsigned count); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/war.h b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/war.h new file mode 100644 index 000000000..1ca6ffdc6 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/include/asm/mach-ar71xx/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MACH_AR71XX_WAR_H +#define __ASM_MACH_AR71XX_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MACH_AR71XX_WAR_H */ diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/pci/pci-ar71xx.c b/target/linux/ar71xx/files-2.6.39/arch/mips/pci/pci-ar71xx.c new file mode 100644 index 000000000..fd6b37900 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/pci/pci-ar71xx.c @@ -0,0 +1,415 @@ +/* + * Atheros AR71xx PCI host controller driver + * + * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Parts of this file are based on Atheros' 2.6.15 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/resource.h> +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/bitops.h> +#include <linux/pci.h> +#include <linux/pci_regs.h> +#include <linux/interrupt.h> + +#include <asm/mach-ar71xx/ar71xx.h> +#include <asm/mach-ar71xx/pci.h> + +#undef DEBUG +#ifdef DEBUG +#define DBG(fmt, args...) printk(KERN_DEBUG fmt, ## args) +#else +#define DBG(fmt, args...) +#endif + +#define AR71XX_PCI_DELAY 100 /* msecs */ + +#if 0 +#define PCI_IDSEL_BASE PCI_IDSEL_ADL_START +#else +#define PCI_IDSEL_BASE 0 +#endif + +static void __iomem *ar71xx_pcicfg_base; +static DEFINE_SPINLOCK(ar71xx_pci_lock); +static int ar71xx_pci_fixup_enable; + +static inline void ar71xx_pci_delay(void) +{ + mdelay(AR71XX_PCI_DELAY); +} + +/* Byte lane enable bits */ +static u8 ble_table[4][4] = { + {0x0, 0xf, 0xf, 0xf}, + {0xe, 0xd, 0xb, 0x7}, + {0xc, 0xf, 0x3, 0xf}, + {0xf, 0xf, 0xf, 0xf}, +}; + +static inline u32 ar71xx_pci_get_ble(int where, int size, int local) +{ + u32 t; + + t = ble_table[size & 3][where & 3]; + BUG_ON(t == 0xf); + t <<= (local) ? 20 : 4; + return t; +} + +static inline u32 ar71xx_pci_bus_addr(struct pci_bus *bus, unsigned int devfn, + int where) +{ + u32 ret; + + if (!bus->number) { + /* type 0 */ + ret = (1 << (PCI_IDSEL_BASE + PCI_SLOT(devfn))) + | (PCI_FUNC(devfn) << 8) | (where & ~3); + } else { + /* type 1 */ + ret = (bus->number << 16) | (PCI_SLOT(devfn) << 11) + | (PCI_FUNC(devfn) << 8) | (where & ~3) | 1; + } + + return ret; +} + +int ar71xx_pci_be_handler(int is_fixup) +{ + void __iomem *base = ar71xx_pcicfg_base; + u32 pci_err; + u32 ahb_err; + + pci_err = __raw_readl(base + PCI_REG_PCI_ERR) & 3; + if (pci_err) { + if (!is_fixup) + printk(KERN_ALERT "PCI error %d at PCI addr 0x%x\n", + pci_err, + __raw_readl(base + PCI_REG_PCI_ERR_ADDR)); + + __raw_writel(pci_err, base + PCI_REG_PCI_ERR); + } + + ahb_err = __raw_readl(base + PCI_REG_AHB_ERR) & 1; + if (ahb_err) { + if (!is_fixup) + printk(KERN_ALERT "AHB error at AHB address 0x%x\n", + __raw_readl(base + PCI_REG_AHB_ERR_ADDR)); + + __raw_writel(ahb_err, base + PCI_REG_AHB_ERR); + } + + return (ahb_err | pci_err) ? 1 : 0; +} + +static inline int ar71xx_pci_set_cfgaddr(struct pci_bus *bus, + unsigned int devfn, int where, int size, u32 cmd) +{ + void __iomem *base = ar71xx_pcicfg_base; + u32 addr; + + addr = ar71xx_pci_bus_addr(bus, devfn, where); + + DBG("PCI: set cfgaddr: %02x:%02x.%01x/%02x:%01d, addr=%08x\n", + bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), + where, size, addr); + + __raw_writel(addr, base + PCI_REG_CFG_AD); + __raw_writel(cmd | ar71xx_pci_get_ble(where, size, 0), + base + PCI_REG_CFG_CBE); + + return ar71xx_pci_be_handler(1); +} + +static int ar71xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *value) +{ + void __iomem *base = ar71xx_pcicfg_base; + static u32 mask[8] = {0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0}; + unsigned long flags; + u32 data; + int retry = 0; + int ret; + + ret = PCIBIOS_SUCCESSFUL; + + DBG("PCI: read config: %02x:%02x.%01x/%02x:%01d\n", bus->number, + PCI_SLOT(devfn), PCI_FUNC(devfn), where, size); + +retry: + spin_lock_irqsave(&ar71xx_pci_lock, flags); + + if (bus->number == 0 && devfn == 0) { + u32 t; + + t = PCI_CRP_CMD_READ | (where & ~3); + + __raw_writel(t, base + PCI_REG_CRP_AD_CBE); + data = __raw_readl(base + PCI_REG_CRP_RDDATA); + + DBG("PCI: rd local cfg, ad_cbe:%08x, data:%08x\n", t, data); + + } else { + int err; + + err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size, + PCI_CFG_CMD_READ); + + if (err == 0) { + data = __raw_readl(base + PCI_REG_CFG_RDDATA); + } else { + ret = PCIBIOS_DEVICE_NOT_FOUND; + data = ~0; + } + } + + spin_unlock_irqrestore(&ar71xx_pci_lock, flags); + + DBG("PCI: read config: data=%08x raw=%08x\n", + (data >> (8 * (where & 3))) & mask[size & 7], data); + + *value = (data >> (8 * (where & 3))) & mask[size & 7]; + + /* + * PCI controller bug: sometimes reads to the PCI_COMMAND register + * return 0xffff, even though the PCI trace shows the correct value. + * Work around this by retrying reads to this register + */ + if (where == PCI_COMMAND && (*value & 0xffff) == 0xffff && retry++ < 2) + goto retry; + + return ret; +} + +static int ar71xx_pci_write_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 value) +{ + void __iomem *base = ar71xx_pcicfg_base; + unsigned long flags; + int ret; + + DBG("PCI: write config: %02x:%02x.%01x/%02x:%01d value=%08x\n", + bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), + where, size, value); + + value = value << (8 * (where & 3)); + ret = PCIBIOS_SUCCESSFUL; + + spin_lock_irqsave(&ar71xx_pci_lock, flags); + if (bus->number == 0 && devfn == 0) { + u32 t; + + t = PCI_CRP_CMD_WRITE | (where & ~3); + t |= ar71xx_pci_get_ble(where, size, 1); + + DBG("PCI: wr local cfg, ad_cbe:%08x, value:%08x\n", t, value); + + __raw_writel(t, base + PCI_REG_CRP_AD_CBE); + __raw_writel(value, base + PCI_REG_CRP_WRDATA); + } else { + int err; + + err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size, + PCI_CFG_CMD_WRITE); + + if (err == 0) + __raw_writel(value, base + PCI_REG_CFG_WRDATA); + else + ret = PCIBIOS_DEVICE_NOT_FOUND; + } + spin_unlock_irqrestore(&ar71xx_pci_lock, flags); + + return ret; +} + +static void ar71xx_pci_fixup(struct pci_dev *dev) +{ + u32 t; + + if (!ar71xx_pci_fixup_enable) + return; + + if (dev->bus->number != 0 || dev->devfn != 0) + return; + + DBG("PCI: fixup host controller %s (%04x:%04x)\n", pci_name(dev), + dev->vendor, dev->device); + + /* setup COMMAND register */ + t = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE + | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK; + + pci_write_config_word(dev, PCI_COMMAND, t); +} +DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ar71xx_pci_fixup); + +int __init ar71xx_pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, + uint8_t pin) +{ + int irq = -1; + int i; + + slot -= PCI_IDSEL_ADL_START - PCI_IDSEL_BASE; + + for (i = 0; i < ar71xx_pci_nr_irqs; i++) { + struct ar71xx_pci_irq *entry; + + entry = &ar71xx_pci_irq_map[i]; + if (entry->slot == slot && entry->pin == pin) { + irq = entry->irq; + break; + } + } + + if (irq < 0) { + printk(KERN_ALERT "PCI: no irq found for pin%u@%s\n", + pin, pci_name((struct pci_dev *)dev)); + } else { + printk(KERN_INFO "PCI: mapping irq %d to pin%u@%s\n", + irq, pin, pci_name((struct pci_dev *)dev)); + } + + return irq; +} + +static struct pci_ops ar71xx_pci_ops = { + .read = ar71xx_pci_read_config, + .write = ar71xx_pci_write_config, +}; + +static struct resource ar71xx_pci_io_resource = { + .name = "PCI IO space", + .start = 0, + .end = 0, + .flags = IORESOURCE_IO, +}; + +static struct resource ar71xx_pci_mem_resource = { + .name = "PCI memory space", + .start = AR71XX_PCI_MEM_BASE, + .end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +static struct pci_controller ar71xx_pci_controller = { + .pci_ops = &ar71xx_pci_ops, + .mem_resource = &ar71xx_pci_mem_resource, + .io_resource = &ar71xx_pci_io_resource, +}; + +static void ar71xx_pci_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + void __iomem *base = ar71xx_reset_base; + u32 pending; + + pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) & + __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); + + if (pending & PCI_INT_DEV0) + generic_handle_irq(AR71XX_PCI_IRQ_DEV0); + + else if (pending & PCI_INT_DEV1) + generic_handle_irq(AR71XX_PCI_IRQ_DEV1); + + else if (pending & PCI_INT_DEV2) + generic_handle_irq(AR71XX_PCI_IRQ_DEV2); + + else if (pending & PCI_INT_CORE) + generic_handle_irq(AR71XX_PCI_IRQ_CORE); + + else + spurious_interrupt(); +} + +static void ar71xx_pci_irq_unmask(struct irq_data *d) +{ + unsigned int irq = d->irq - AR71XX_PCI_IRQ_BASE; + void __iomem *base = ar71xx_reset_base; + u32 t; + + t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); + __raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE); + + /* flush write */ + (void) __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); +} + +static void ar71xx_pci_irq_mask(struct irq_data *d) +{ + unsigned int irq = d->irq - AR71XX_PCI_IRQ_BASE; + void __iomem *base = ar71xx_reset_base; + u32 t; + + t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); + __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE); + + /* flush write */ + (void) __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); +} + +static struct irq_chip ar71xx_pci_irq_chip = { + .name = "AR71XX PCI ", + .irq_mask = ar71xx_pci_irq_mask, + .irq_unmask = ar71xx_pci_irq_unmask, + .irq_mask_ack = ar71xx_pci_irq_mask, +}; + +static void __init ar71xx_pci_irq_init(void) +{ + void __iomem *base = ar71xx_reset_base; + int i; + + __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_ENABLE); + __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_STATUS); + + for (i = AR71XX_PCI_IRQ_BASE; + i < AR71XX_PCI_IRQ_BASE + AR71XX_PCI_IRQ_COUNT; i++) + irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip, + handle_level_irq); + + irq_set_chained_handler(AR71XX_CPU_IRQ_IP2, ar71xx_pci_irq_handler); +} + +int __init ar71xx_pcibios_init(void) +{ + void __iomem *ddr_base = ar71xx_ddr_base; + + ar71xx_device_stop(RESET_MODULE_PCI_BUS | RESET_MODULE_PCI_CORE); + ar71xx_pci_delay(); + + ar71xx_device_start(RESET_MODULE_PCI_BUS | RESET_MODULE_PCI_CORE); + ar71xx_pci_delay(); + + ar71xx_pcicfg_base = ioremap_nocache(AR71XX_PCI_CFG_BASE, + AR71XX_PCI_CFG_SIZE); + if (ar71xx_pcicfg_base == NULL) + return -ENOMEM; + + __raw_writel(PCI_WIN0_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN0); + __raw_writel(PCI_WIN1_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN1); + __raw_writel(PCI_WIN2_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN2); + __raw_writel(PCI_WIN3_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN3); + __raw_writel(PCI_WIN4_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN4); + __raw_writel(PCI_WIN5_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN5); + __raw_writel(PCI_WIN6_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN6); + __raw_writel(PCI_WIN7_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN7); + + ar71xx_pci_delay(); + + /* clear bus errors */ + (void)ar71xx_pci_be_handler(1); + + ar71xx_pci_fixup_enable = 1; + ar71xx_pci_irq_init(); + register_pci_controller(&ar71xx_pci_controller); + + return 0; +} diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/pci/pci-ar724x.c b/target/linux/ar71xx/files-2.6.39/arch/mips/pci/pci-ar724x.c new file mode 100644 index 000000000..57daa0614 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/pci/pci-ar724x.c @@ -0,0 +1,389 @@ +/* + * Atheros AR724x PCI host controller driver + * + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * + * Parts of this file are based on Atheros' 2.6.15 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/resource.h> +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/bitops.h> +#include <linux/pci.h> +#include <linux/pci_regs.h> +#include <linux/interrupt.h> + +#include <asm/mach-ar71xx/ar71xx.h> +#include <asm/mach-ar71xx/pci.h> + +#undef DEBUG +#ifdef DEBUG +#define DBG(fmt, args...) printk(KERN_INFO fmt, ## args) +#else +#define DBG(fmt, args...) +#endif + +static void __iomem *ar724x_pci_localcfg_base; +static void __iomem *ar724x_pci_devcfg_base; +static void __iomem *ar724x_pci_ctrl_base; +static int ar724x_pci_fixup_enable; + +static DEFINE_SPINLOCK(ar724x_pci_lock); + +static void ar724x_pci_read(void __iomem *base, int where, int size, u32 *value) +{ + unsigned long flags; + u32 data; + + spin_lock_irqsave(&ar724x_pci_lock, flags); + data = __raw_readl(base + (where & ~3)); + + switch (size) { + case 1: + if (where & 1) + data >>= 8; + if (where & 2) + data >>= 16; + data &= 0xFF; + break; + case 2: + if (where & 2) + data >>= 16; + data &= 0xFFFF; + break; + } + + *value = data; + spin_unlock_irqrestore(&ar724x_pci_lock, flags); +} + +static void ar724x_pci_write(void __iomem *base, int where, int size, u32 value) +{ + unsigned long flags; + u32 data; + int s; + + spin_lock_irqsave(&ar724x_pci_lock, flags); + data = __raw_readl(base + (where & ~3)); + + switch (size) { + case 1: + s = ((where & 3) << 3); + data &= ~(0xFF << s); + data |= ((value & 0xFF) << s); + break; + case 2: + s = ((where & 2) << 3); + data &= ~(0xFFFF << s); + data |= ((value & 0xFFFF) << s); + break; + case 4: + data = value; + break; + } + + __raw_writel(data, base + (where & ~3)); + /* flush write */ + (void)__raw_readl(base + (where & ~3)); + spin_unlock_irqrestore(&ar724x_pci_lock, flags); +} + +static int ar724x_pci_read_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *value) +{ + + if (bus->number != 0 || devfn != 0) + return PCIBIOS_DEVICE_NOT_FOUND; + + ar724x_pci_read(ar724x_pci_devcfg_base, where, size, value); + + DBG("PCI: read config: %02x:%02x.%01x/%02x:%01d, value=%08x\n", + bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), + where, size, *value); + + /* + * WAR for BAR issue - We are unable to access the PCI device space + * if we set the BAR with proper base address + */ + if ((where == 0x10) && (size == 4)) { + u32 val; + val = (ar71xx_soc == AR71XX_SOC_AR7240) ? 0xffff : 0x1000ffff; + ar724x_pci_write(ar724x_pci_devcfg_base, where, size, val); + } + + return PCIBIOS_SUCCESSFUL; +} + +static int ar724x_pci_write_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 value) +{ + if (bus->number != 0 || devfn != 0) + return PCIBIOS_DEVICE_NOT_FOUND; + + DBG("PCI: write config: %02x:%02x.%01x/%02x:%01d, value=%08x\n", + bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), + where, size, value); + + ar724x_pci_write(ar724x_pci_devcfg_base, where, size, value); + + return PCIBIOS_SUCCESSFUL; +} + +static void ar724x_pci_fixup(struct pci_dev *dev) +{ + u16 cmd; + + if (!ar724x_pci_fixup_enable) + return; + + if (dev->bus->number != 0 || dev->devfn != 0) + return; + + /* setup COMMAND register */ + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | + PCI_COMMAND_INVALIDATE | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | + PCI_COMMAND_FAST_BACK; + + pci_write_config_word(dev, PCI_COMMAND, cmd); +} +DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ar724x_pci_fixup); + +int __init ar724x_pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, + uint8_t pin) +{ + int irq = -1; + int i; + + for (i = 0; i < ar71xx_pci_nr_irqs; i++) { + struct ar71xx_pci_irq *entry; + entry = &ar71xx_pci_irq_map[i]; + + if (entry->slot == slot && entry->pin == pin) { + irq = entry->irq; + break; + } + } + + if (irq < 0) + printk(KERN_ALERT "PCI: no irq found for pin%u@%s\n", + pin, pci_name((struct pci_dev *)dev)); + else + printk(KERN_INFO "PCI: mapping irq %d to pin%u@%s\n", + irq, pin, pci_name((struct pci_dev *)dev)); + + return irq; +} + +static struct pci_ops ar724x_pci_ops = { + .read = ar724x_pci_read_config, + .write = ar724x_pci_write_config, +}; + +static struct resource ar724x_pci_io_resource = { + .name = "PCI IO space", + .start = 0, + .end = 0, + .flags = IORESOURCE_IO, +}; + +static struct resource ar724x_pci_mem_resource = { + .name = "PCI memory space", + .start = AR71XX_PCI_MEM_BASE, + .end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +static struct pci_controller ar724x_pci_controller = { + .pci_ops = &ar724x_pci_ops, + .mem_resource = &ar724x_pci_mem_resource, + .io_resource = &ar724x_pci_io_resource, +}; + +static void __init ar724x_pci_reset(void) +{ + ar71xx_device_stop(AR724X_RESET_PCIE); + ar71xx_device_stop(AR724X_RESET_PCIE_PHY); + ar71xx_device_stop(AR724X_RESET_PCIE_PHY_SERIAL); + udelay(100); + + ar71xx_device_start(AR724X_RESET_PCIE_PHY_SERIAL); + udelay(100); + ar71xx_device_start(AR724X_RESET_PCIE_PHY); + ar71xx_device_start(AR724X_RESET_PCIE); +} + +static int __init ar724x_pci_setup(void) +{ + void __iomem *base = ar724x_pci_ctrl_base; + u32 t; + + /* setup COMMAND register */ + t = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE | + PCI_COMMAND_PARITY|PCI_COMMAND_SERR|PCI_COMMAND_FAST_BACK; + + ar724x_pci_write(ar724x_pci_localcfg_base, PCI_COMMAND, 4, t); + ar724x_pci_write(ar724x_pci_localcfg_base, 0x20, 4, 0x1ff01000); + ar724x_pci_write(ar724x_pci_localcfg_base, 0x24, 4, 0x1ff01000); + + t = __raw_readl(base + AR724X_PCI_REG_RESET); + if (t != 0x7) { + udelay(100000); + __raw_writel(0, base + AR724X_PCI_REG_RESET); + udelay(100); + __raw_writel(4, base + AR724X_PCI_REG_RESET); + udelay(100000); + } + + if (ar71xx_soc == AR71XX_SOC_AR7240) + t = AR724X_PCI_APP_LTSSM_ENABLE; + else + t = 0x1ffc1; + __raw_writel(t, base + AR724X_PCI_REG_APP); + /* flush write */ + (void) __raw_readl(base + AR724X_PCI_REG_APP); + udelay(1000); + + t = __raw_readl(base + AR724X_PCI_REG_RESET); + if ((t & AR724X_PCI_RESET_LINK_UP) == 0x0) { + printk(KERN_WARNING "PCI: no PCIe module found\n"); + return -ENODEV; + } + + if (ar71xx_soc == AR71XX_SOC_AR7241 || + ar71xx_soc == AR71XX_SOC_AR7242) { + t = __raw_readl(base + AR724X_PCI_REG_APP); + t |= BIT(16); + __raw_writel(t, base + AR724X_PCI_REG_APP); + } + + return 0; +} + +static void ar724x_pci_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + void __iomem *base = ar724x_pci_ctrl_base; + u32 pending; + + pending = __raw_readl(base + AR724X_PCI_REG_INT_STATUS) & + __raw_readl(base + AR724X_PCI_REG_INT_MASK); + + if (pending & AR724X_PCI_INT_DEV0) + generic_handle_irq(AR71XX_PCI_IRQ_DEV0); + + else + spurious_interrupt(); +} + +static void ar724x_pci_irq_unmask(struct irq_data *d) +{ + void __iomem *base = ar724x_pci_ctrl_base; + u32 t; + + switch (d->irq) { + case AR71XX_PCI_IRQ_DEV0: + t = __raw_readl(base + AR724X_PCI_REG_INT_MASK); + __raw_writel(t | AR724X_PCI_INT_DEV0, + base + AR724X_PCI_REG_INT_MASK); + /* flush write */ + (void) __raw_readl(base + AR724X_PCI_REG_INT_MASK); + } +} + +static void ar724x_pci_irq_mask(struct irq_data *d) +{ + void __iomem *base = ar724x_pci_ctrl_base; + u32 t; + + switch (d->irq) { + case AR71XX_PCI_IRQ_DEV0: + t = __raw_readl(base + AR724X_PCI_REG_INT_MASK); + __raw_writel(t & ~AR724X_PCI_INT_DEV0, + base + AR724X_PCI_REG_INT_MASK); + + /* flush write */ + (void) __raw_readl(base + AR724X_PCI_REG_INT_MASK); + + t = __raw_readl(base + AR724X_PCI_REG_INT_STATUS); + __raw_writel(t | AR724X_PCI_INT_DEV0, + base + AR724X_PCI_REG_INT_STATUS); + + /* flush write */ + (void) __raw_readl(base + AR724X_PCI_REG_INT_STATUS); + } +} + +static struct irq_chip ar724x_pci_irq_chip = { + .name = "AR724X PCI ", + .irq_mask = ar724x_pci_irq_mask, + .irq_unmask = ar724x_pci_irq_unmask, + .irq_mask_ack = ar724x_pci_irq_mask, +}; + +static void __init ar724x_pci_irq_init(int irq) +{ + void __iomem *base = ar724x_pci_ctrl_base; + u32 t; + int i; + + t = ar71xx_reset_rr(AR724X_RESET_REG_RESET_MODULE); + if (t & (AR724X_RESET_PCIE | AR724X_RESET_PCIE_PHY | + AR724X_RESET_PCIE_PHY_SERIAL)) { + return; + } + + __raw_writel(0, base + AR724X_PCI_REG_INT_MASK); + __raw_writel(0, base + AR724X_PCI_REG_INT_STATUS); + + for (i = AR71XX_PCI_IRQ_BASE; + i < AR71XX_PCI_IRQ_BASE + AR71XX_PCI_IRQ_COUNT; i++) + irq_set_chip_and_handler(i, &ar724x_pci_irq_chip, + handle_level_irq); + + irq_set_chained_handler(irq, ar724x_pci_irq_handler); +} + +int __init ar724x_pcibios_init(int irq) +{ + int ret = -ENOMEM; + + ar724x_pci_localcfg_base = ioremap_nocache(AR724X_PCI_CRP_BASE, + AR724X_PCI_CRP_SIZE); + if (ar724x_pci_localcfg_base == NULL) + goto err; + + ar724x_pci_devcfg_base = ioremap_nocache(AR724X_PCI_CFG_BASE, + AR724X_PCI_CFG_SIZE); + if (ar724x_pci_devcfg_base == NULL) + goto err_unmap_localcfg; + + ar724x_pci_ctrl_base = ioremap_nocache(AR724X_PCI_CTRL_BASE, + AR724X_PCI_CTRL_SIZE); + if (ar724x_pci_ctrl_base == NULL) + goto err_unmap_devcfg; + + ar724x_pci_reset(); + ret = ar724x_pci_setup(); + if (ret) + goto err_unmap_ctrl; + + ar724x_pci_fixup_enable = 1; + ar724x_pci_irq_init(irq); + register_pci_controller(&ar724x_pci_controller); + + return 0; + +err_unmap_ctrl: + iounmap(ar724x_pci_ctrl_base); +err_unmap_devcfg: + iounmap(ar724x_pci_devcfg_base); +err_unmap_localcfg: + iounmap(ar724x_pci_localcfg_base); +err: + return ret; +} |