diff options
Diffstat (limited to 'target/linux/adm5120/files/include/asm-mips/mach-adm5120')
17 files changed, 1487 insertions, 0 deletions
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_board.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_board.h new file mode 100644 index 000000000..23f62a293 --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_board.h @@ -0,0 +1,50 @@ +/* + * $Id$ + * + * ADM5120 board definitions + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _ADM5120_BOARD_H_ +#define _ADM5120_BOARD_H_ + +#include <linux/init.h> +#include <linux/list.h> + +#define ADM5120_BOARD_NAMELEN 64 + +struct adm5120_board { + unsigned long mach_type; + char name[ADM5120_BOARD_NAMELEN]; + + void (*board_setup)(void); + void (*board_reset)(void); + + unsigned int eth_num_ports; + unsigned char *eth_vlans; + unsigned int num_devices; + struct platform_device **devices; + + struct list_head list; +}; + +extern void adm5120_board_register(struct adm5120_board *) __init; + +#endif /* _ADM5120_BOARD_H_ */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_defs.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_defs.h new file mode 100644 index 000000000..f5ab1b3f1 --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_defs.h @@ -0,0 +1,60 @@ +/* + * $Id$ + * + * ADM5120 SoC definitions + * + * This file defines some constants specific to the ADM5120 SoC + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ +#ifndef _ADM5120_DEFS_H +#define _ADM5120_DEFS_H + +#define ADM5120_SDRAM0_BASE 0x00000000 +#define ADM5120_SDRAM1_BASE 0x01000000 +#define ADM5120_SRAM1_BASE 0x10000000 +#define ADM5120_MPMC_BASE 0x11000000 +#define ADM5120_USBC_BASE 0x11200000 +#define ADM5120_PCIMEM_BASE 0x11400000 +#define ADM5120_PCIIO_BASE 0x11500000 +#define ADM5120_PCICFG_ADDR 0x115FFFF0 +#define ADM5120_PCICFG_DATA 0x115FFFF8 +#define ADM5120_SWITCH_BASE 0x12000000 +#define ADM5120_INTC_BASE 0x12200000 +#define ADM5120_UART0_BASE 0x12600000 +#define ADM5120_UART1_BASE 0x12800000 +#define ADM5120_SRAM0_BASE 0x1FC00000 + +#define ADM5120_MPMC_SIZE 0x1000 +#define ADM5120_USBC_SIZE 0x84 +#define ADM5120_PCIMEM_SIZE (ADM5120_PCIIO_BASE - ADM5120_PCIMEM_BASE) +#define ADM5120_PCIIO_SIZE (ADM5120_PCICFG_ADDR - ADM5120_PCIIO_BASE) +#define ADM5120_PCICFG_SIZE 0x10 +#define ADM5120_SWITCH_SIZE 0x114 +#define ADM5120_INTC_SIZE 0x28 +#define ADM5120_UART_SIZE 0x20 + +#define ADM5120_CLK_175 175000000 +#define ADM5120_CLK_200 200000000 +#define ADM5120_CLK_225 225000000 +#define ADM5120_CLK_250 250000000 + +#define ADM5120_UART_CLOCK 62500000 + +#endif /* _ADM5120_DEFS_H */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_info.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_info.h new file mode 100644 index 000000000..b8b9c5d47 --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_info.h @@ -0,0 +1,92 @@ +/* + * $Id$ + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _ADM5120_INFO_H +#define _ADM5120_INFO_H + +#include <linux/types.h> + +extern unsigned int adm5120_prom_type; +#define ADM5120_PROM_GENERIC 0 +#define ADM5120_PROM_CFE 1 +#define ADM5120_PROM_MYLOADER 2 +#define ADM5120_PROM_ROUTERBOOT 3 +#define ADM5120_PROM_BOOTBASE 4 +#define ADM5120_PROM_UBOOT 5 +#define ADM5120_PROM_LAST 5 + +extern unsigned int adm5120_product_code; +extern unsigned int adm5120_revision; +extern unsigned int adm5120_nand_boot; + +extern unsigned long adm5120_speed; +#define ADM5120_SPEED_175 175000000 +#define ADM5120_SPEED_200 200000000 +#define ADM5120_SPEED_225 225000000 +#define ADM5120_SPEED_250 250000000 + +extern unsigned int adm5120_package; +#define ADM5120_PACKAGE_PQFP 0 +#define ADM5120_PACKAGE_BGA 1 + +extern unsigned long adm5120_memsize; + +/* + * TODO:remove adm5120_eth* variables when the switch driver will be + * converted into a real platform driver + */ +extern unsigned int adm5120_eth_num_ports; +extern unsigned char adm5120_eth_macs[6][6]; +extern unsigned char adm5120_eth_vlans[6]; + +extern void adm5120_soc_init(void) __init; +extern void adm5120_mem_init(void) __init; +extern void adm5120_time_init(void) __init; +extern void adm5120_ndelay(u32 ns); + +extern void adm5120_restart(char *command); +extern void adm5120_halt(void); +extern void adm5120_power_off(void); + +extern void (*adm5120_board_reset)(void); + +static inline int adm5120_package_pqfp(void) +{ + return (adm5120_package == ADM5120_PACKAGE_PQFP); +} + +static inline int adm5120_package_bga(void) +{ + return (adm5120_package == ADM5120_PACKAGE_BGA); +} + +static inline int adm5120_has_pci(void) +{ + return (adm5120_package == ADM5120_PACKAGE_BGA); +} + +static inline int adm5120_has_gmii(void) +{ + return (adm5120_package == ADM5120_PACKAGE_BGA); +} + +#endif /* _ADM5120_INFO_H */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_intc.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_intc.h new file mode 100644 index 000000000..4d7525951 --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_intc.h @@ -0,0 +1,76 @@ +/* + * $Id$ + * + * ADM5120 interrupt controller definitions + * + * This header file defines the hardware registers of the ADM5120 SoC + * built-in interrupt controller. + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _ADM5120_INTC_H_ +#define _ADM5120_INTC_H_ + +/* + * INTC register offsets + */ +#define INTC_REG_IRQ_STATUS 0x00 /* Interrupt status after masking */ +#define INTC_REG_IRQ_RAW_STATUS 0x04 /* Interrupt status before masking */ +#define INTC_REG_IRQ_ENABLE 0x08 /* Used to enable the interrupt sources */ +#define INTC_REG_IRQ_ENABLE_CLEAR 0x0C /* Used to disable the interrupt sources */ +#define INTC_REG_IRQ_DISABLE INTC_REG_IRQ_ENABLE_CLEAR +#define INTC_REG_INT_MODE 0x14 /* The interrupt mode of the sources */ +#define INTC_REG_FIQ_STATUS 0x18 /* FIQ status */ +#define INTC_REG_IRQ_TEST_SOURCE 0x1C +#define INTC_REG_IRQ_SOURCE_SELECT 0x20 +#define INTC_REG_INT_LEVEL 0x24 + +/* + * INTC IRQ numbers + */ +#define INTC_IRQ_TIMER 0 /* built in timer */ +#define INTC_IRQ_UART0 1 /* built-in UART0 */ +#define INTC_IRQ_UART1 2 /* built-in UART1 */ +#define INTC_IRQ_USBC 3 /* USB Host Controller */ +#define INTC_IRQ_GPIO2 4 /* GPIO line 2 */ +#define INTC_IRQ_GPIO4 5 /* GPIO line 4 */ +#define INTC_IRQ_PCI0 6 /* PCI slot 2 */ +#define INTC_IRQ_PCI1 7 /* PCI slot 3 */ +#define INTC_IRQ_PCI2 8 /* PCI slot 4 */ +#define INTC_IRQ_SWITCH 9 /* built-in ethernet switch */ +#define INTC_IRQ_LAST INTC_IRQ_SWITCH +#define INTC_IRQ_COUNT 10 + +/* + * INTC register bits + */ +#define INTC_INT_TIMER ( 1 << INTC_IRQ_TIMER ) +#define INTC_INT_UART0 ( 1 << INTC_IRQ_UART0 ) +#define INTC_INT_UART1 ( 1 << INTC_IRQ_UART1 ) +#define INTC_INT_USBC ( 1 << INTC_IRQ_USBC ) +#define INTC_INT_INTX0 ( 1 << INTC_IRQ_INTX0 ) +#define INTC_INT_INTX1 ( 1 << INTC_IRQ_INTX1 ) +#define INTC_INT_PCI0 ( 1 << INTC_IRQ_PCI0 ) +#define INTC_INT_PCI1 ( 1 << INTC_IRQ_PCI1 ) +#define INTC_INT_PCI2 ( 1 << INTC_IRQ_PCI2 ) +#define INTC_INT_SWITCH ( 1 << INTC_IRQ_SWITCH ) +#define INTC_INT_ALL (( 1 << INTC_IRQ_COUNT)-1) + +#endif /* _ADM5120_INTC_H_ */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_irq.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_irq.h new file mode 100644 index 000000000..1b9e21989 --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_irq.h @@ -0,0 +1,55 @@ +/* + * $Id$ + * + * ADM5120 specific IRQ numbers + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ +#ifndef _ADM5120_IRQ_H_ +#define _ADM5120_IRQ_H_ + +#include <asm/mach-adm5120/adm5120_intc.h> + +#define MIPS_IRQ_HW0 2 +#define MIPS_IRQ_COUNTER 7 +#define MIPS_IRQ_COUNT 8 + +#define ADM5120_CPU_IRQ_BASE 0 +#define ADM5120_INTC_IRQ_BASE (ADM5120_CPU_IRQ_BASE+MIPS_IRQ_COUNT) +#define ADM5120_SWITCH_IRQ_BASE (ADM5120_INTC_IRQ_BASE+INTC_IRQ_COUNT) + +#define ADM5120_CPU_IRQ(x) (ADM5120_CPU_IRQ_BASE + (x)) +#define ADM5120_INTC_IRQ(x) (ADM5120_INTC_IRQ_BASE + (x)) + +#define ADM5120_IRQ_INTC ADM5120_CPU_IRQ(MIPS_IRQ_HW0) +#define ADM5120_IRQ_COUNTER ADM5120_CPU_IRQ(MIPS_IRQ_COUNTER) + +#define ADM5120_IRQ_TIMER ADM5120_INTC_IRQ(INTC_IRQ_TIMER) +#define ADM5120_IRQ_UART0 ADM5120_INTC_IRQ(INTC_IRQ_UART0) +#define ADM5120_IRQ_UART1 ADM5120_INTC_IRQ(INTC_IRQ_UART1) +#define ADM5120_IRQ_USBC ADM5120_INTC_IRQ(INTC_IRQ_USBC) +#define ADM5120_IRQ_GPIO2 ADM5120_INTC_IRQ(INTC_IRQ_GPIO2) +#define ADM5120_IRQ_GPIO4 ADM5120_INTC_IRQ(INTC_IRQ_GPIO4) +#define ADM5120_IRQ_PCI0 ADM5120_INTC_IRQ(INTC_IRQ_PCI0) +#define ADM5120_IRQ_PCI1 ADM5120_INTC_IRQ(INTC_IRQ_PCI1) +#define ADM5120_IRQ_PCI2 ADM5120_INTC_IRQ(INTC_IRQ_PCI2) +#define ADM5120_IRQ_SWITCH ADM5120_INTC_IRQ(INTC_IRQ_SWITCH) + +#endif diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_mpmc.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_mpmc.h new file mode 100644 index 000000000..c821150c6 --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_mpmc.h @@ -0,0 +1,87 @@ +/* + * $Id$ + * + * ADM5120 MPMC (Multiport Memory Controller) register definitions + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + +#ifndef _ADM5120_MPMC_H_ +#define _ADM5120_MPMC_H_ + +#define MPMC_REG_CTRL 0x0000 +#define MPMC_REG_STATUS 0x0004 +#define MPMC_REG_CONF 0x0008 +#define MPMC_REG_DC 0x0020 +#define MPMC_REG_DR 0x0024 +#define MPMC_REG_DRP 0x0030 + +#define MPMC_REG_DC0 0x0100 +#define MPMC_REG_DRC0 0x0104 +#define MPMC_REG_DC1 0x0120 +#define MPMC_REG_DRC1 0x0124 +#define MPMC_REG_DC2 0x0140 +#define MPMC_REG_DRC2 0x0144 +#define MPMC_REG_DC3 0x0160 +#define MPMC_REG_DRC3 0x0164 +#define MPMC_REG_SC0 0x0200 /* for F_CS1_N */ +#define MPMC_REG_SC1 0x0220 /* for F_CS0_N */ +#define MPMC_REG_SC2 0x0240 +#define MPMC_REG_SC3 0x0260 + +#define MPMC_CTRL_AM ( 1 << 1 ) + +/* Dynamic Control register bits */ +#define MPMC_DC_CE ( 1 << 0 ) +#define MPMC_DC_DMC ( 1 << 1 ) +#define MPMC_DC_SRR ( 1 << 2 ) +#define MPMC_DC_SI_SHIFT 7 +#define MPMC_DC_SI_MASK ( 3 << 7 ) +#define MPMC_DC_SI_NORMAL ( 0 << 7 ) +#define MPMC_DC_SI_MODE ( 1 << 7 ) +#define MPMC_DC_SI_PALL ( 2 << 7 ) +#define MPMC_DC_SI_NOP ( 3 << 7 ) + +#define SRAM_REG_CONF 0x00 +#define SRAM_REG_WWE 0x04 +#define SRAM_REG_WOE 0x08 +#define SRAM_REG_WRD 0x0C +#define SRAM_REG_WPG 0x10 +#define SRAM_REG_WWR 0x14 +#define SRAM_REG_WTR 0x18 + +/* Dynamic Configuration register bits */ +#define DC_BE (1 << 19) /* buffer enable */ +#define DC_RW_SHIFT 28 /* shift for number of rows */ +#define DC_RW_MASK 0x03 +#define DC_NB_SHIFT 26 /* shift for number of banks */ +#define DC_NB_MASK 0x01 +#define DC_CW_SHIFT 22 /* shift for number of columns */ +#define DC_CW_MASK 0x07 +#define DC_DW_SHIFT 7 /* shift for device width */ +#define DC_DW_MASK 0x03 + +/* Static Configuration register bits */ +#define SC_MW_MASK 0x03 /* memory width mask */ +#define SC_MW_8 0x00 /* 8 bit memory width */ +#define SC_MW_16 0x01 /* 16 bit memory width */ +#define SC_MW_32 0x02 /* 32 bit memory width */ + +#endif /* _ADM5120_MPMC_H_ */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_platform.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_platform.h new file mode 100644 index 000000000..81c76170f --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_platform.h @@ -0,0 +1,85 @@ +/* + * $Id$ + * + * ADM5120 specific platform definitions + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _ADM5120_PLATFORM_H_ +#define _ADM5120_PLATFORM_H_ + +#include <linux/device.h> +#include <linux/platform_device.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> +#include <linux/mtd/partitions.h> + +#include <linux/amba/bus.h> +#include <linux/amba/serial.h> + +struct adm5120_flash_platform_data { + void (*set_vpp)(struct map_info *, int); + void (*switch_bank)(unsigned); +#ifdef CONFIG_MTD_PARTITIONS + unsigned int nr_parts; + struct mtd_partition *parts; +#endif +}; + +struct adm5120_nand_platform_data { + /* TODO : not yet implemented */ +}; + +struct adm5120_switch_platform_data { + /* TODO: not yet implemented */ +}; + +struct adm5120_pci_irq { + u8 slot; + u8 func; + u8 pin; + unsigned irq; +}; + +struct adm5120_pci_platform_data { + unsigned int nr_irqs; + struct adm5120_pci_irq *irqs; +}; + +extern struct adm5120_flash_platform_data adm5120_flash0_data; +extern struct adm5120_flash_platform_data adm5120_flash1_data; +extern struct adm5120_nand_platform_data adm5120_nand_data; +extern struct adm5120_pci_platform_data adm5120_pci_data; +extern struct adm5120_switch_platform_data adm5120_switch_data; +extern struct amba_pl010_data adm5120_uart0_data; +extern struct amba_pl010_data adm5120_uart1_data; + +extern struct platform_device adm5120_flash0_device; +extern struct platform_device adm5120_flash1_device; +extern struct platform_device adm5120_nand_device; +extern struct platform_device adm5120_usbc_device; +extern struct platform_device adm5120_pci_device; +extern struct platform_device adm5120_switch_device; +extern struct amba_device adm5120_uart0_device; +extern struct amba_device adm5120_uart1_device; + + +#endif /* _ADM5120_PLATFORM_H_ */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h new file mode 100644 index 000000000..eb06bfa60 --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h @@ -0,0 +1,148 @@ +/* + * ADM5120 ethernet switch definitions + * + * This header file defines the hardware registers of the ADM5120 SoC + * built-in Ethernet switch. + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _ADM5120_SWITCH_H +#define _ADM5120_SWITCH_H + +#define BITMASK(len) ((1 << (len))-1) +#define ONEBIT(at) (1 << (at)) + +/* Switch register offsets */ +#define SWITCH_REG_CODE 0x0000 +#define SWITCH_REG_SOFT_RESET 0x0004 +#define SWITCH_REG_MEMCTRL 0x001C +#define SWITCH_REG_CPUP_CONF 0x0024 +#define SWITCH_REG_PORT_CONF0 0x0028 +#define SWITCH_REG_PORT_CONF1 0x002C +#define SWITCH_REG_PORT_CONF2 0x0030 +#define SWITCH_REG_VLAN_G1 0x0040 +#define SWITCH_REG_VLAN_G2 0x0044 +#define SWITCH_REG_SEND_TRIG 0x0048 +#define SWITCH_REG_MAC_WT0 0x0058 +#define SWITCH_REG_MAC_WT1 0x005C +#define SWITCH_REG_PHY_CNTL0 0x0068 +#define SWITCH_REG_PHY_CNTL1 0x006C +#define SWITCH_REG_PHY_CNTL2 0x007C +#define SWITCH_REG_PHY_CNTL3 0x0080 +#define SWITCH_REG_PRI_CNTL 0x0084 +#define SWITCH_REG_INT_STATUS 0x00B0 +#define SWITCH_REG_INT_MASK 0x00B4 +#define SWITCH_REG_GPIO_CONF0 0x00B8 +#define SWITCH_REG_GPIO_CONF2 0x00BC +#define SWITCH_REG_WDOG0 0x00C0 +#define SWITCH_REG_WDOG1 0x00C4 +#define SWITCH_REG_PHY_CNTL4 0x00A0 + +#define SWITCH_REG_SEND_HBADDR 0x00D0 +#define SWITCH_REG_SEND_LBADDR 0x00D4 +#define SWITCH_REG_RECV_HBADDR 0x00D8 +#define SWITCH_REG_RECV_LBADDR 0x00DC + +#define SWITCH_REG_TIMER_INT 0x00F0 +#define SWITCH_REG_TIMER 0x00F4 + +#define SWITCH_REG_PORT0_LED 0x0100 +#define SWITCH_REG_PORT1_LED 0x0104 +#define SWITCH_REG_PORT2_LED 0x0108 +#define SWITCH_REG_PORT3_LED 0x010C +#define SWITCH_REG_PORT4_LED 0x0110 + +/* CODE register bits */ +#define CODE_PC_MASK BITMASK(16) /* Product Code */ +#define CODE_REV_SHIFT 16 +#define CODE_REV_MASK BITMASK(4) /* Product Revision */ +#define CODE_CLKS_SHIFT 20 +#define CODE_CLKS_MASK BITMASK(2) /* Clock Speed */ +#define CODE_CLKS_175 0 /* 175 MHz */ +#define CODE_CLKS_200 1 /* 200 MHz */ +#define CODE_CLKS_225 2 /* 225 MHz */ +#define CODE_CLKS_250 3 /* 250 MHz */ +#define CODE_NAB ONEBIT(24) /* NAND boot */ +#define CODE_PK_MASK BITMASK(1) /* Package type */ +#define CODE_PK_SHIFT 29 +#define CODE_PK_BGA 0 /* BGA package */ +#define CODE_PK_PQFP 1 /* PQFP package */ + +/* MEMCTRL register bits */ +#define MEMCTRL_SDRS_MASK BITMASK(3) /* SDRAM bank size */ +#define MEMCTRL_SDRS_4M 0x01 +#define MEMCTRL_SDRS_8M 0x02 +#define MEMCTRL_SDRS_16M 0x03 +#define MEMCTRL_SDRS_64M 0x04 +#define MEMCTRL_SDRS_128M 0x05 +#define MEMCTRL_SDR1_ENABLE ONEBIT(5) /* enable SDRAM bank 1 */ + +#define MEMCTRL_SRS0_SHIFT 8 /* shift for SRAM0 size */ +#define MEMCTRL_SRS1_SHIFT 16 /* shift for SRAM1 size */ +#define MEMCTRL_SRS_MASK BITMASK(3) /* SRAM size mask */ +#define MEMCTRL_SRS_DISABLED 0x00 /* Disabled */ +#define MEMCTRL_SRS_512K 0x01 /* 512KB*/ +#define MEMCTRL_SRS_1M 0x02 /* 1MB */ +#define MEMCTRL_SRS_2M 0x03 /* 2MB */ +#define MEMCTRL_SRS_4M 0x04 /* 4MB */ + +/* GPIO_CONF0 register bits */ +#define GPIO_CONF0_MASK BITMASK(8) +#define GPIO_CONF0_IM_SHIFT 0 +#define GPIO_CONF0_IV_SHIFT 8 +#define GPIO_CONF0_OE_SHIFT 16 +#define GPIO_CONF0_OV_SHIFT 24 +#define GPIO_CONF0_IM_MASK (0xFF << GPIO_CONF0_IM_SHIFT) +#define GPIO_CONF0_IV_MASK (0xFF << GPIO_CONF0_IV_SHIFT) +#define GPIO_CONF0_OE_MASK (0xFF << GPIO_CONF0_OE_SHIFT) +#define GPIO_CONF0_OV_MASK (0xFF << GPIO_CONF0_OV_SHIFT) + +/* TIMER_INT register bits */ +#define TIMER_INT_TOS ONEBIT(1) /* time-out status */ +#define TIMER_INT_TOM ONEBIT(16) /* mask time-out interrupt */ + +/* TIMER register bits */ +#define TIMER_PERIOD_MASK BITMASK(16) /* mask for timer period */ +#define TIMER_PERIOD_DEFAULT 0xFFFF /* default timer period */ +#define TIMER_TE ONEBIT(16) /* timer enable bit */ + +/* PORTx_LED register bits */ +#define LED_MODE_MASK BITMASK(4) +#define LED_MODE_INPUT 0 +#define LED_MODE_FLASH 1 +#define LED_MODE_OUT_HIGH 2 +#define LED_MODE_OUT_LOW 3 +#define LED_MODE_LINK 4 +#define LED_MODE_SPEED 5 +#define LED_MODE_DUPLEX 6 +#define LED_MODE_ACT 7 +#define LED_MODE_COLL 8 +#define LED_MODE_LINK_ACT 9 +#define LED_MODE_DUPLEX_COLL 10 +#define LED_MODE_10M_ACT 11 +#define LED_MODE_100M_ACT 12 +#define LED0_MODE_SHIFT 0 /* LED0 mode shift */ +#define LED1_MODE_SHIFT 4 /* LED1 mode shift */ +#define LED2_MODE_SHIFT 8 /* LED2 mode shift */ +#define LED0_IV_SHIFT 12 /* LED0 input value shift */ +#define LED1_IV_SHIFT 13 /* LED1 input value shift */ +#define LED2_IV_SHIFT 14 /* LED2 input value shift */ + +#endif /* _ADM5120_SWITCH_H */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_uart.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_uart.h new file mode 100755 index 000000000..89c48dee5 --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_uart.h @@ -0,0 +1,75 @@ +/* + * ADM5120 UART definitions + * + * This header file defines the hardware registers of the ADM5120 SoC + * built-in UARTs. + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _ADM5120_UART_H_ +#define _ADM5120_UART_H_ + +#define UART_BAUDDIV(clk, baud) ((clk/(16 * (baud)))-1) + +#define UART_REG_DATA 0x00 +#define UART_REG_RSR 0x04 +#define UART_REG_ECR UART_REG_RSR +#define UART_REG_LCRH 0x08 +#define UART_REG_LCRM 0x0C +#define UART_REG_LCRL 0x10 +#define UART_REG_CTRL 0x14 +#define UART_REG_FLAG 0x18 + +/* Receive Status Register bits */ +#define UART_RSR_FE ( 1 << 0 ) +#define UART_RSR_PE ( 1 << 1 ) +#define UART_RSR_BE ( 1 << 2 ) +#define UART_RSR_OE ( 1 << 3 ) +#define UART_RSR_ERR ( UART_RSR_FE | UART_RSR_PE | UART_RSR_BE ) + +#define UART_ECR_ALL 0xFF + +/* Line Control High register bits */ +#define UART_LCRH_BRK ( 1 << 0 ) /* send break */ +#define UART_LCRH_PEN ( 1 << 1 ) /* parity enable */ +#define UART_LCRH_EPS ( 1 << 2 ) /* even parity select */ +#define UART_LCRH_STP1 ( 0 << 3 ) /* one stop bits select */ +#define UART_LCRH_STP2 ( 1 << 3 ) /* two stop bits select */ +#define UART_LCRH_FEN ( 1 << 4 ) /* FIFO enable */ + +#define UART_LCRH_WLEN5 ( 0 << 5 ) +#define UART_LCRH_WLEN6 ( 1 << 5 ) +#define UART_LCRH_WLEN7 ( 2 << 5 ) +#define UART_LCRH_WLEN8 ( 3 << 5 ) + +/* Control register bits */ +#define UART_CTRL_EN ( 1 << 0 ) + +/* Flag register bits */ +#define UART_FLAG_CTS ( 1 << 0 ) +#define UART_FLAG_DSR ( 1 << 1 ) +#define UART_FLAG_DCD ( 1 << 2 ) +#define UART_FLAG_BUSY ( 1 << 3 ) +#define UART_FLAG_RXFE ( 1 << 4 ) +#define UART_FLAG_TXFF ( 1 << 5 ) +#define UART_FLAG_RXFF ( 1 << 6 ) +#define UART_FLAG_TXFE ( 1 << 7 ) + +#endif /* _ADM5120_UART_H_ */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/asm/sizes.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/asm/sizes.h new file mode 100644 index 000000000..503843db1 --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/asm/sizes.h @@ -0,0 +1,56 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* DO NOT EDIT!! - this file automatically generated + * from .s file by awk -f s2h.awk + */ +/* Size definitions + * Copyright (C) ARM Limited 1998. All rights reserved. + */ + +#ifndef __sizes_h +#define __sizes_h 1 + +/* handy sizes */ +#define SZ_16 0x00000010 +#define SZ_256 0x00000100 +#define SZ_512 0x00000200 + +#define SZ_1K 0x00000400 +#define SZ_4K 0x00001000 +#define SZ_8K 0x00002000 +#define SZ_16K 0x00004000 +#define SZ_64K 0x00010000 +#define SZ_128K 0x00020000 +#define SZ_256K 0x00040000 +#define SZ_512K 0x00080000 + +#define SZ_1M 0x00100000 +#define SZ_2M 0x00200000 +#define SZ_4M 0x00400000 +#define SZ_8M 0x00800000 +#define SZ_16M 0x01000000 +#define SZ_32M 0x02000000 +#define SZ_64M 0x04000000 +#define SZ_128M 0x08000000 +#define SZ_256M 0x10000000 +#define SZ_512M 0x20000000 + +#define SZ_1G 0x40000000 +#define SZ_2G 0x80000000 + +#endif + +/* END */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/cpu-feature-overrides.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/cpu-feature-overrides.h new file mode 100644 index 000000000..6216b864f --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/cpu-feature-overrides.h @@ -0,0 +1,89 @@ +/* + * $Id$ + * + * ADM5120 specific CPU feature overrides + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org> + * + * This file was derived from: include/asm-mips/cpu-features.h + * Copyright (C) 2003, 2004 Ralf Baechle + * Copyright (C) 2004 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ +#ifndef __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H + +#ifdef CONFIG_ADM5120_CPU_OVERRIDES + +/* + * The ADM5120 SOC has a built-in MIPS 4Kc core. + */ +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_3k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_tx39_cache 0 +#define cpu_has_sb1_cache 0 +#define cpu_has_fpu 0 +#define cpu_has_32fpr 0 +#define cpu_has_counter 1 +#define cpu_has_watch 1 +#define cpu_has_divec 1 +/* #define cpu_has_vce ? */ +/* #define cpu_has_cache_cdex_p ? */ +/* #define cpu_has_cache_cdex_s ? */ +#define cpu_has_prefetch 1 +/* #define cpu_has_mcheck ? */ +#define cpu_has_ejtag 1 +#define cpu_has_llsc 1 + +#define cpu_has_mips16 0 +#define cpu_has_mdmx 0 +#define cpu_has_mips3d 0 +#define cpu_has_smartmips 0 + +/* #define cpu_has_vtag_icache ? */ +/* #define cpu_has_dc_aliases ? */ +/* #define cpu_has_ic_fills_f_dc ? */ +/* #define cpu_has_pindexed_dcache ? */ + +/* #define cpu_icache_snoops_remote_store ? */ + +#define cpu_has_mips32r1 1 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#define cpu_has_dsp 0 +#define cpu_has_mipsmt 0 + +/* #define cpu_has_nofpuex ? */ +#define cpu_has_64bits 0 +#define cpu_has_64bit_zero_reg 0 +#define cpu_has_64bit_gp_regs 0 +#define cpu_has_64bit_addresses 0 + +/* #define cpu_has_inclusive_pcaches ? */ + +#define cpu_dcache_line_size() 16 +#define cpu_icache_line_size() 16 + +#endif /* CONFIG_ADM5120_CPU_OVERRIDES */ + + +#endif /* __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/gpio.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/gpio.h new file mode 100644 index 000000000..684d86cd4 --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/gpio.h @@ -0,0 +1,126 @@ +/* + * $Id$ + * + * ADM5120 GPIO wrappers for arch-neutral GPIO calls + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + +#ifndef _ADM5120_GPIO_H_ +#define _ADM5120_GPIO_H_ + +#include <asm/mach-adm5120/adm5120_switch.h> + +#define ADM5120_GPIO_PIN0 0 +#define ADM5120_GPIO_PIN1 1 +#define ADM5120_GPIO_PIN2 2 +#define ADM5120_GPIO_PIN3 3 +#define ADM5120_GPIO_PIN4 4 +#define ADM5120_GPIO_PIN5 5 +#define ADM5120_GPIO_PIN6 6 +#define ADM5120_GPIO_PIN7 7 +#define ADM5120_GPIO_P0L0 8 +#define ADM5120_GPIO_P0L1 9 +#define ADM5120_GPIO_P0L2 10 +#define ADM5120_GPIO_P1L0 11 +#define ADM5120_GPIO_P1L1 12 +#define ADM5120_GPIO_P1L2 13 +#define ADM5120_GPIO_P2L0 14 +#define ADM5120_GPIO_P2L1 15 +#define ADM5120_GPIO_P2L2 16 +#define ADM5120_GPIO_P3L0 17 +#define ADM5120_GPIO_P3L1 18 +#define ADM5120_GPIO_P3L2 19 +#define ADM5120_GPIO_P4L0 20 +#define ADM5120_GPIO_P4L1 21 +#define ADM5120_GPIO_P4L2 22 +#define ADM5120_GPIO_MAX 22 +#define ADM5120_GPIO_COUNT ADM5120_GPIO_MAX+1 + +#define ADM5120_GPIO_LOW 0 +#define ADM5120_GPIO_HIGH 1 + +#define ADM5120_GPIO_SWITCH 0x10 +#define ADM5120_GPIO_FLASH (ADM5120_GPIO_SWITCH | LED_MODE_FLASH) +#define ADM5120_GPIO_LINK (ADM5120_GPIO_SWITCH | LED_MODE_LINK) +#define ADM5120_GPIO_SPEED (ADM5120_GPIO_SWITCH | LED_MODE_SPEED) +#define ADM5120_GPIO_DUPLEX (ADM5120_GPIO_SWITCH | LED_MODE_DUPLEX) +#define ADM5120_GPIO_ACT (ADM5120_GPIO_SWITCH | LED_MODE_ACT) +#define ADM5120_GPIO_COLL (ADM5120_GPIO_SWITCH | LED_MODE_COLL) +#define ADM5120_GPIO_LINK_ACT (ADM5120_GPIO_SWITCH | LED_MODE_LINK_ACT) +#define ADM5120_GPIO_DUPLEX_COLL (ADM5120_GPIO_SWITCH | LED_MODE_DUPLEX_COLL) +#define ADM5120_GPIO_10M_ACT (ADM5120_GPIO_SWITCH | LED_MODE_10M_ACT) +#define ADM5120_GPIO_100M_ACT (ADM5120_GPIO_SWITCH | LED_MODE_100M_ACT) + +extern int adm5120_gpio_direction_input(unsigned gpio); +extern int adm5120_gpio_direction_output(unsigned gpio, int value); +extern int adm5120_gpio_get_value(unsigned gpio); +extern void adm5120_gpio_set_value(unsigned gpio, int value); +extern int adm5120_gpio_request(unsigned gpio, const char *label); +extern void adm5120_gpio_free(unsigned gpio); +extern int adm5120_gpio_to_irq(unsigned gpio); +extern int adm5120_irq_to_gpio(unsigned irq); + +/* + * Wrappers for the generic GPIO layer + */ +static inline int gpio_direction_input(unsigned gpio) +{ + return adm5120_gpio_direction_input(gpio); +} + +static inline int gpio_direction_output(unsigned gpio, int value) +{ + return adm5120_gpio_direction_output(gpio,value); +} + +static inline int gpio_get_value(unsigned gpio) +{ + return adm5120_gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + adm5120_gpio_set_value(gpio, value); +} + +static inline int gpio_request(unsigned gpio, const char *label) +{ + return adm5120_gpio_request(gpio, label); +} + +static inline void gpio_free(unsigned gpio) +{ + adm5120_gpio_free(gpio); +} + +static inline int gpio_to_irq(unsigned gpio) +{ + return adm5120_gpio_to_irq(gpio); +} + +static inline int irq_to_gpio(unsigned irq) +{ + return adm5120_irq_to_gpio(irq); +} + +#include <asm-generic/gpio.h> /* cansleep wrappers */ + +#endif diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/cfe.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/cfe.h new file mode 100644 index 000000000..7d202361a --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/cfe.h @@ -0,0 +1,31 @@ +/* + * $Id$ + * + * Broadcom's CFE definitions + * + * Copyright (C) 2006,2007 Gabor Juhos <juhosg at openwrt.org> + * Copyright (C) 2007 OpenWrt.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _PROM_CFE_H_ +#define _PROM_CFE_H_ + +extern int cfe_present(void) __init; +extern char *cfe_getenv(char *); + +#endif /*_PROM_CFE_H_*/ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/generic.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/generic.h new file mode 100644 index 000000000..2cfa10367 --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/generic.h @@ -0,0 +1,31 @@ +/* + * $Id$ + * + * Generic prom definitions + * + * Copyright (C) 2006,2007 Gabor Juhos <juhosg at openwrt.org> + * Copyright (C) 2007 OpenWrt.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _PROM_GENERIC_H_ +#define _PROM_GENERIC_H_ + +extern int generic_prom_present(void) __init; +extern char *generic_prom_getenv(char *); + +#endif /*_PROM_GENERIC_H_*/ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/myloader.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/myloader.h new file mode 100644 index 000000000..526de865c --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/myloader.h @@ -0,0 +1,191 @@ +/* + * $Id$ + * + * Compex's MyLoader specific definitions + * + * Copyright (C) 2006,2007 Gabor Juhos <juhosg at openwrt.org> + * Copyright (C) 2007 OpenWrt.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _MYLOADER_H_ +#define _MYLOADER_H_ + +/* + * Firmware file format: + * + * <header> + * [<block descriptor 0>] + * ... + * [<block descriptor n>] + * <null block descriptor> + * [<block data 0>] + * ... + * [<block data n>] + * + * + */ + +/* Myloader specific magic numbers */ +#define MYLO_MAGIC_FIRMWARE 0x4C594D00 +#define MYLO_MAGIC_20021103 0x20021103 +#define MYLO_MAGIC_20021107 0x20021107 + +#define MYLO_MAGIC_SYS_PARAMS MYLO_MAGIC_20021107 +#define MYLO_MAGIC_PARTITIONS MYLO_MAGIC_20021103 +#define MYLO_MAGIC_BOARD_PARAMS MYLO_MAGIC_20021103 + +/* + * Addresses of the data structures provided by MyLoader + */ +#define MYLO_MIPS_SYS_PARAMS 0x80000800 /* System Parameters */ +#define MYLO_MIPS_BOARD_PARAMS 0x80000A00 /* Board Parameters */ +#define MYLO_MIPS_PARTITIONS 0x80000C00 /* Partition Table */ +#define MYLO_MIPS_BOOT_PARAMS 0x80000E00 /* Boot Parameters */ + +/* Vendor ID's (seems to be same as the PCI vendor ID's) */ +#define VENID_COMPEX 0x11F6 + +/* Devices based on the ADM5120 */ +#define DEVID_COMPEX_NP27G 0x0078 +#define DEVID_COMPEX_NP28G 0x044C +#define DEVID_COMPEX_NP28GHS 0x044E +#define DEVID_COMPEX_WP54Gv1C 0x0514 +#define DEVID_COMPEX_WP54G 0x0515 +#define DEVID_COMPEX_WP54AG 0x0546 +#define DEVID_COMPEX_WPP54AG 0x0550 +#define DEVID_COMPEX_WPP54G 0x0555 + +/* Devices based on the IXP422 */ +#define DEVID_COMPEX_WP18 0x047E +#define DEVID_COMPEX_NP18A 0x0489 + +/* Other devices */ +#define DEVID_COMPEX_NP26G8M 0x03E8 +#define DEVID_COMPEX_NP26G16M 0x03E9 + +struct mylo_fw_header { + uint32_t magic; /* must be MYLO_MAGIC_FIRMWARE */ + uint32_t crc; /* CRC of the whole firmware */ + uint32_t res0; /* unknown/unused */ + uint32_t res1; /* unknown/unused */ + uint16_t vid; /* vendor ID */ + uint16_t did; /* device ID */ + uint16_t svid; /* sub vendor ID */ + uint16_t sdid; /* sub device ID */ + uint32_t rev; /* device revision */ + uint32_t fwhi; /* FIXME: firmware version high? */ + uint32_t fwlo; /* FIXME: firmware version low? */ + uint32_t flags; /* firmware flags */ +}; + +#define FW_FLAG_BOARD_PARAMS_WP 0x01 /* board parameters are write protected */ +#define FW_FLAG_BOOT_SECTOR_WE 0x02 /* enable of write boot sectors (below 64K) */ + +struct mylo_fw_blockdesc { + uint32_t type; /* block type */ + uint32_t addr; /* relative address to flash start */ + uint32_t dlen; /* size of block data in bytes */ + uint32_t blen; /* total size of block in bytes */ +}; + +#define FW_DESC_TYPE_UNUSED 0 +#define FW_DESC_TYPE_USED 1 + +struct mylo_partition { + uint16_t flags; /* partition flags */ + uint16_t type; /* type of the partition */ + uint32_t addr; /* relative address of the partition from the + flash start */ + uint32_t size; /* size of the partition in bytes */ + uint32_t param; /* if this is the active partition, the + MyLoader load code to this address */ +}; + +#define PARTITION_FLAG_ACTIVE 0x8000 /* this is the active partition, + * MyLoader loads firmware from here */ +#define PARTITION_FLAG_ISRAM 0x2000 /* FIXME: this is a RAM partition? */ +#define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */ +#define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM + * before decompression */ +#define PARTITION_FLAG_HAVEHDR 0x0002 /* the partition data have a header */ + +#define PARTITION_TYPE_FREE 0 +#define PARTITION_TYPE_USED 1 + +#define MYLO_MAX_PARTITIONS 8 /* maximum number of partitions in the + partition table */ + +struct mylo_partition_table { + uint32_t magic; /* must be MYLO_MAGIC_PARTITIONS */ + uint32_t res0; /* unknown/unused */ + uint32_t res1; /* unknown/unused */ + uint32_t res2; /* unknown/unused */ + struct mylo_partition partitions[MYLO_MAX_PARTITIONS]; +}; + +struct mylo_partition_header { + uint32_t len; /* length of the partition data */ + uint32_t crc; /* CRC value of the partition data */ +}; + +struct mylo_system_params { + uint32_t magic; /* must be MYLO_MAGIC_SYS_PARAMS */ + uint32_t res0; + uint32_t res1; + uint32_t mylo_ver; + uint16_t vid; /* Vendor ID */ + uint16_t did; /* Device ID */ + uint16_t svid; /* Sub Vendor ID */ + uint16_t sdid; /* Sub Device ID */ + uint32_t rev; /* device revision */ + uint32_t fwhi; + uint32_t fwlo; + uint32_t tftp_addr; + uint32_t prog_start; + uint32_t flash_size; /* Size of boot FLASH in bytes */ + uint32_t dram_size; /* Size of onboard RAM in bytes */ +}; + + +struct mylo_eth_addr { + uint8_t mac[6]; + uint8_t csum[2]; +}; + +#define MYLO_ETHADDR_COUNT 8 /* maximum number of ethernet address + in the board parameters */ + +struct mylo_board_params { + uint32_t magic; /* must be MYLO_MAGIC_BOARD_PARAMS */ + uint32_t res0; + uint32_t res1; + uint32_t res2; + struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT]; +}; + +struct myloader_info { + u32 vid; + u32 did; + u32 svid; + u32 sdid; +}; + +extern struct myloader_info myloader_info; +extern int myloader_present(void) __init; + +#endif /* _MYLOADER_H_*/ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/routerboot.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/routerboot.h new file mode 100644 index 000000000..3c0898b3d --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/routerboot.h @@ -0,0 +1,137 @@ +/* + * $Id$ + * + * Mikrotik's RouterBOOT definitions + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _ROUTERBOOT_H +#define _ROUTERBOOT_H + +#define RB_MAC_SIZE 6 +#define RB_MAX_MAC_COUNT 6 + +struct rb_bios_settings { + u32 hs_offs; /* hard settings offset */ + u32 hs_size; /* hard settings size */ + u32 fw_offs; /* firmware offset */ + u32 ss_offs; /* soft settings offset */ + u32 ss_size; /* soft settings size */ +}; + +struct rb_hard_settings { + char *name; /* board name */ + char *bios_ver; /* BIOS version */ + u32 mem_size; /* memory size in bytes */ + u32 mac_count; /* number of mac addresses */ + u8 macs[RB_MAC_SIZE][RB_MAX_MAC_COUNT]; /* mac addresses */ +}; + +/* + * Magic numbers + */ +#define RB_MAGIC_HARD 0x64726148 /* "Hard" */ +#define RB_MAGIC_SOFT 0x74666F53 /* "Soft" */ +#define RB_MAGIC_DAWN 0x6E776144 /* "Dawn" */ + +#define RB_ID_TERMINATOR 0 + +/* + * ID values for Hardware settings + */ +#define RB_ID_HARD_01 1 +#define RB_ID_HARD_02 2 +#define RB_ID_FLASH_INFO 3 +#define RB_ID_MAC_ADDRESS_PACK 4 +#define RB_ID_BOARD_NAME 5 +#define RB_ID_BIOS_VERSION 6 +#define RB_ID_HARD_07 7 +#define RB_ID_SDRAM_TIMINGS 8 +#define RB_ID_DEVICE_TIMINGS 9 +#define RB_ID_SOFTWARE_ID 10 +#define RB_ID_SERIAL_NUMBER 11 +#define RB_ID_HARD_12 12 +#define RB_ID_MEMORY_SIZE 13 +#define RB_ID_MAC_ADDRESS_COUNT 14 + +/* + * ID values for Software settings + */ +#define RB_ID_UART_SPEED 1 +#define RB_ID_BOOT_DELAY 2 +#define RB_ID_BOOT_DEVICE 3 +#define RB_ID_BOOT_KEY 4 +#define RB_ID_CPU_MODE 5 +#define RB_ID_FW_VERSION 6 +#define RB_ID_SOFT_07 7 +#define RB_ID_SOFT_08 8 +#define RB_ID_BOOT_PROTOCOL 9 +#define RB_ID_SOFT_10 10 +#define RB_ID_SOFT_11 11 + +/* + * UART_SPEED values + */ +#define RB_UART_SPEED_115200 0 +#define RB_UART_SPEED_57600 1 +#define RB_UART_SPEED_38400 2 +#define RB_UART_SPEED_19200 3 +#define RB_UART_SPEED_9600 4 +#define RB_UART_SPEED_4800 5 +#define RB_UART_SPEED_2400 6 +#define RB_UART_SPEED_1200 7 + +/* + * BOOT_DELAY values + */ +#define RB_BOOT_DELAY_0SEC 0 +#define RB_BOOT_DELAY_1SEC 1 +#define RB_BOOT_DELAY_2SEC 2 + +/* + * BOOT_DEVICE values + */ +#define RB_BOOT_DEVICE_ETHER 0 +#define RB_BOOT_DEVICE_NANDETH 1 +#define RB_BOOT_DEVICE_ETHONCE 2 +#define RB_BOOT_DEVICE_NANDONLY 3 + +/* + * BOOT_KEY values + */ +#define RB_BOOT_KEY_ANY 0 +#define RB_BOOT_KEY_DEL 1 + +/* + * CPU_MODE values + */ +#define RB_CPU_MODE_POWERSAVE 0 +#define RB_CPU_MODE_REGULAR 1 + +/* + * BOOT_PROTOCOL values + */ +#define RB_BOOT_PROTOCOL_BOOTP 0 +#define RB_BOOT_PROTOCOL_DHCP 1 + +extern int routerboot_present(void) __init; +extern char *routerboot_get_boardname(void); + +#endif /* _ROUTERBOOT_H */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/zynos.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/zynos.h new file mode 100644 index 000000000..e9471b5ad --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/zynos.h @@ -0,0 +1,98 @@ +/* + * $Id$ + * + * ZyNOS (ZyXEL's Networking OS) definitions + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _ZYNOS_H +#define _ZYNOS_H + +#define ZYNOS_NAME_LEN 32 +#define ZYNOS_FEAT_BYTES 22 +#define ZYNOS_MAC_LEN 6 + +struct zynos_board_info { + unsigned char vendor[ZYNOS_NAME_LEN]; + unsigned char product[ZYNOS_NAME_LEN]; + u32 bootext_addr; + u32 res0; + u16 board_id; + u8 res1[6]; + u8 feat_other[ZYNOS_FEAT_BYTES]; + u8 feat_main; + u8 res2; + u8 mac[ZYNOS_MAC_LEN]; + u8 country; + u8 dbgflag; +} __attribute__ ((packed)); + +/* + * Vendor IDs + */ +#define ZYNOS_VENDOR_ID_ZYXEL 0 +#define ZYNOS_VENDOR_ID_NETGEAR 1 +#define ZYNOS_VENDOR_ID_DLINK 2 +#define ZYNOS_VENDOR_ID_OTHER 3 +#define ZYNOS_VENDOR_ID_LUCENT 4 + +/* + * Vendor names + */ +#define ZYNOS_VENDOR_DLINK "D-Link" +#define ZYNOS_VENDOR_LUCENT "LUCENT" +#define ZYNOS_VENDOR_NETGEAR "NetGear" +#define ZYNOS_VENDOR_ZYXEL "ZyXEL" + +/* + * Board IDs (big-endian) + */ +#define ZYNOS_BOARD_ES2108 0x00F2 /* Ethernet Switch 2108 */ +#define ZYNOS_BOARD_ES2108F 0x01AF /* Ethernet Switch 2108-F */ +#define ZYNOS_BOARD_ES2108G 0x00F3 /* Ethernet Switch 2108-G */ +#define ZYNOS_BOARD_ES2108LC 0x00FC /* Ethernet Switch 2108-LC */ +#define ZYNOS_BOARD_ES2108PWR 0x00F4 /* Ethernet Switch 2108PWR */ +#define ZYNOS_BOARD_HS100 0x9FF1 /* HomeSafe 100/100W */ +#define ZYNOS_BOARD_P334 0x9FF5 /* Prestige 334 */ +#define ZYNOS_BOARD_P334U 0x9FDD /* Prestige 334U */ +#define ZYNOS_BOARD_P334W 0x9FF3 /* Prestige 334W */ +#define ZYNOS_BOARD_P334WH 0x00E0 /* Prestige 334WH */ +#define ZYNOS_BOARD_P334WHD 0x00E1 /* Prestige 334WHD */ +#define ZYNOS_BOARD_P334WT 0x9FEF /* Prestige 334WT */ +#define ZYNOS_BOARD_P335 0x9FED /* Prestige 335/335WT */ +#define ZYNOS_BOARD_P335PLUS 0x0025 /* Prestige 335Plus */ +#define ZYNOS_BOARD_P335U 0x9FDC /* Prestige 335U */ + +/* + * Some magic numbers (big-endian) + */ +#define ZYNOS_MAGIC_DBGAREA1 0x48646267 /* "Hdbg" */ +#define ZYNOS_MAGIC_DBGAREA2 0x61726561 /* "area" */ + +struct bootbase_info { + u16 vendor_id; + u16 board_id; + u8 mac[6]; +}; + +extern struct bootbase_info bootbase_info; +extern int bootbase_present(void) __init; + +#endif /* _ZYNOS_H */ |