diff options
Diffstat (limited to 'target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom')
6 files changed, 0 insertions, 443 deletions
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/admboot.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/admboot.h deleted file mode 100644 index fa42bf714..000000000 --- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/admboot.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * ADMBoot specific definitions - * - * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#ifndef _ADMBOOT_H -#define _ADMBOOT_H - -extern int admboot_get_mac_base(u32 offset, u32 len, u8 *mac) __init; - -#endif /* _ADMBOOT_H */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/cfe.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/cfe.h deleted file mode 100644 index 0cb3eee70..000000000 --- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/cfe.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Broadcom's CFE definitions - * - * Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#ifndef _PROM_CFE_H_ -#define _PROM_CFE_H_ - -extern int cfe_present(void) __init; -extern char *cfe_getenv(char *); - -#endif /*_PROM_CFE_H_*/ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/generic.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/generic.h deleted file mode 100644 index 778df2467..000000000 --- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/generic.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Generic prom definitions - * - * Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#ifndef _PROM_GENERIC_H_ -#define _PROM_GENERIC_H_ - -extern int generic_prom_present(void) __init; -extern char *generic_prom_getenv(char *); - -#endif /*_PROM_GENERIC_H_*/ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/myloader.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/myloader.h deleted file mode 100644 index ea8db81ed..000000000 --- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/myloader.h +++ /dev/null @@ -1,179 +0,0 @@ -/* - * Compex's MyLoader specific definitions - * - * Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#ifndef _MYLOADER_H_ -#define _MYLOADER_H_ - -/* - * Firmware file format: - * - * <header> - * [<block descriptor 0>] - * ... - * [<block descriptor n>] - * <null block descriptor> - * [<block data 0>] - * ... - * [<block data n>] - * - * - */ - -/* Myloader specific magic numbers */ -#define MYLO_MAGIC_FIRMWARE 0x4C594D00 -#define MYLO_MAGIC_20021103 0x20021103 -#define MYLO_MAGIC_20021107 0x20021107 - -#define MYLO_MAGIC_SYS_PARAMS MYLO_MAGIC_20021107 -#define MYLO_MAGIC_PARTITIONS MYLO_MAGIC_20021103 -#define MYLO_MAGIC_BOARD_PARAMS MYLO_MAGIC_20021103 - -/* - * Addresses of the data structures provided by MyLoader - */ -#define MYLO_MIPS_SYS_PARAMS 0x80000800 /* System Parameters */ -#define MYLO_MIPS_BOARD_PARAMS 0x80000A00 /* Board Parameters */ -#define MYLO_MIPS_PARTITIONS 0x80000C00 /* Partition Table */ -#define MYLO_MIPS_BOOT_PARAMS 0x80000E00 /* Boot Parameters */ - -/* Vendor ID's (seems to be same as the PCI vendor ID's) */ -#define VENID_COMPEX 0x11F6 - -/* Devices based on the ADM5120 */ -#define DEVID_COMPEX_NP27G 0x0078 -#define DEVID_COMPEX_NP28G 0x044C -#define DEVID_COMPEX_NP28GHS 0x044E -#define DEVID_COMPEX_WP54Gv1C 0x0514 -#define DEVID_COMPEX_WP54G 0x0515 -#define DEVID_COMPEX_WP54AG 0x0546 -#define DEVID_COMPEX_WPP54AG 0x0550 -#define DEVID_COMPEX_WPP54G 0x0555 - -/* Devices based on the IXP422 */ -#define DEVID_COMPEX_WP18 0x047E -#define DEVID_COMPEX_NP18A 0x0489 - -/* Other devices */ -#define DEVID_COMPEX_NP26G8M 0x03E8 -#define DEVID_COMPEX_NP26G16M 0x03E9 - -struct mylo_fw_header { - uint32_t magic; /* must be MYLO_MAGIC_FIRMWARE */ - uint32_t crc; /* CRC of the whole firmware */ - uint32_t res0; /* unknown/unused */ - uint32_t res1; /* unknown/unused */ - uint16_t vid; /* vendor ID */ - uint16_t did; /* device ID */ - uint16_t svid; /* sub vendor ID */ - uint16_t sdid; /* sub device ID */ - uint32_t rev; /* device revision */ - uint32_t fwhi; /* FIXME: firmware version high? */ - uint32_t fwlo; /* FIXME: firmware version low? */ - uint32_t flags; /* firmware flags */ -}; - -#define FW_FLAG_BOARD_PARAMS_WP 0x01 /* board parameters are write protected */ -#define FW_FLAG_BOOT_SECTOR_WE 0x02 /* enable of write boot sectors (below 64K) */ - -struct mylo_fw_blockdesc { - uint32_t type; /* block type */ - uint32_t addr; /* relative address to flash start */ - uint32_t dlen; /* size of block data in bytes */ - uint32_t blen; /* total size of block in bytes */ -}; - -#define FW_DESC_TYPE_UNUSED 0 -#define FW_DESC_TYPE_USED 1 - -struct mylo_partition { - uint16_t flags; /* partition flags */ - uint16_t type; /* type of the partition */ - uint32_t addr; /* relative address of the partition from the - flash start */ - uint32_t size; /* size of the partition in bytes */ - uint32_t param; /* if this is the active partition, the - MyLoader load code to this address */ -}; - -#define PARTITION_FLAG_ACTIVE 0x8000 /* this is the active partition, - * MyLoader loads firmware from here */ -#define PARTITION_FLAG_ISRAM 0x2000 /* FIXME: this is a RAM partition? */ -#define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */ -#define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM - * before decompression */ -#define PARTITION_FLAG_HAVEHDR 0x0002 /* the partition data have a header */ - -#define PARTITION_TYPE_FREE 0 -#define PARTITION_TYPE_USED 1 - -#define MYLO_MAX_PARTITIONS 8 /* maximum number of partitions in the - partition table */ - -struct mylo_partition_table { - uint32_t magic; /* must be MYLO_MAGIC_PARTITIONS */ - uint32_t res0; /* unknown/unused */ - uint32_t res1; /* unknown/unused */ - uint32_t res2; /* unknown/unused */ - struct mylo_partition partitions[MYLO_MAX_PARTITIONS]; -}; - -struct mylo_partition_header { - uint32_t len; /* length of the partition data */ - uint32_t crc; /* CRC value of the partition data */ -}; - -struct mylo_system_params { - uint32_t magic; /* must be MYLO_MAGIC_SYS_PARAMS */ - uint32_t res0; - uint32_t res1; - uint32_t mylo_ver; - uint16_t vid; /* Vendor ID */ - uint16_t did; /* Device ID */ - uint16_t svid; /* Sub Vendor ID */ - uint16_t sdid; /* Sub Device ID */ - uint32_t rev; /* device revision */ - uint32_t fwhi; - uint32_t fwlo; - uint32_t tftp_addr; - uint32_t prog_start; - uint32_t flash_size; /* Size of boot FLASH in bytes */ - uint32_t dram_size; /* Size of onboard RAM in bytes */ -}; - - -struct mylo_eth_addr { - uint8_t mac[6]; - uint8_t csum[2]; -}; - -#define MYLO_ETHADDR_COUNT 8 /* maximum number of ethernet address - in the board parameters */ - -struct mylo_board_params { - uint32_t magic; /* must be MYLO_MAGIC_BOARD_PARAMS */ - uint32_t res0; - uint32_t res1; - uint32_t res2; - struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT]; -}; - -struct myloader_info { - u32 vid; - u32 did; - u32 svid; - u32 sdid; - uint8_t macs[MYLO_ETHADDR_COUNT][6]; -}; - -extern struct myloader_info myloader_info; -extern int myloader_present(void) __init; - -#endif /* _MYLOADER_H_*/ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/routerboot.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/routerboot.h deleted file mode 100644 index d5ad513d5..000000000 --- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/routerboot.h +++ /dev/null @@ -1,125 +0,0 @@ -/* - * Mikrotik's RouterBOOT definitions - * - * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#ifndef _ROUTERBOOT_H -#define _ROUTERBOOT_H - -#define RB_MAC_SIZE 6 - -struct rb_bios_settings { - u32 hs_offs; /* hard settings offset */ - u32 hs_size; /* hard settings size */ - u32 fw_offs; /* firmware offset */ - u32 ss_offs; /* soft settings offset */ - u32 ss_size; /* soft settings size */ -}; - -struct rb_hard_settings { - char *name; /* board name */ - char *bios_ver; /* BIOS version */ - u32 mem_size; /* memory size in bytes */ - u32 mac_count; /* number of mac addresses */ - u8 *mac_base; /* mac address base */ -}; - -/* - * Magic numbers - */ -#define RB_MAGIC_HARD 0x64726148 /* "Hard" */ -#define RB_MAGIC_SOFT 0x74666F53 /* "Soft" */ -#define RB_MAGIC_DAWN 0x6E776144 /* "Dawn" */ - -#define RB_ID_TERMINATOR 0 - -/* - * ID values for Hardware settings - */ -#define RB_ID_HARD_01 1 -#define RB_ID_HARD_02 2 -#define RB_ID_FLASH_INFO 3 -#define RB_ID_MAC_ADDRESS_PACK 4 -#define RB_ID_BOARD_NAME 5 -#define RB_ID_BIOS_VERSION 6 -#define RB_ID_HARD_07 7 -#define RB_ID_SDRAM_TIMINGS 8 -#define RB_ID_DEVICE_TIMINGS 9 -#define RB_ID_SOFTWARE_ID 10 -#define RB_ID_SERIAL_NUMBER 11 -#define RB_ID_HARD_12 12 -#define RB_ID_MEMORY_SIZE 13 -#define RB_ID_MAC_ADDRESS_COUNT 14 - -/* - * ID values for Software settings - */ -#define RB_ID_UART_SPEED 1 -#define RB_ID_BOOT_DELAY 2 -#define RB_ID_BOOT_DEVICE 3 -#define RB_ID_BOOT_KEY 4 -#define RB_ID_CPU_MODE 5 -#define RB_ID_FW_VERSION 6 -#define RB_ID_SOFT_07 7 -#define RB_ID_SOFT_08 8 -#define RB_ID_BOOT_PROTOCOL 9 -#define RB_ID_SOFT_10 10 -#define RB_ID_SOFT_11 11 - -/* - * UART_SPEED values - */ -#define RB_UART_SPEED_115200 0 -#define RB_UART_SPEED_57600 1 -#define RB_UART_SPEED_38400 2 -#define RB_UART_SPEED_19200 3 -#define RB_UART_SPEED_9600 4 -#define RB_UART_SPEED_4800 5 -#define RB_UART_SPEED_2400 6 -#define RB_UART_SPEED_1200 7 - -/* - * BOOT_DELAY values - */ -#define RB_BOOT_DELAY_0SEC 0 -#define RB_BOOT_DELAY_1SEC 1 -#define RB_BOOT_DELAY_2SEC 2 - -/* - * BOOT_DEVICE values - */ -#define RB_BOOT_DEVICE_ETHER 0 -#define RB_BOOT_DEVICE_NANDETH 1 -#define RB_BOOT_DEVICE_ETHONCE 2 -#define RB_BOOT_DEVICE_NANDONLY 3 - -/* - * BOOT_KEY values - */ -#define RB_BOOT_KEY_ANY 0 -#define RB_BOOT_KEY_DEL 1 - -/* - * CPU_MODE values - */ -#define RB_CPU_MODE_POWERSAVE 0 -#define RB_CPU_MODE_REGULAR 1 - -/* - * BOOT_PROTOCOL values - */ -#define RB_BOOT_PROTOCOL_BOOTP 0 -#define RB_BOOT_PROTOCOL_DHCP 1 - -extern int routerboot_present(void) __init; -extern char *routerboot_get_boardname(void); - -extern struct rb_hard_settings rb_hs; - -#endif /* _ROUTERBOOT_H */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/zynos.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/zynos.h deleted file mode 100644 index d1e3e5b94..000000000 --- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/zynos.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - * ZyNOS (ZyXEL's Networking OS) definitions - * - * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#ifndef _ZYNOS_H -#define _ZYNOS_H - -#define ZYNOS_NAME_LEN 32 -#define ZYNOS_FEAT_BYTES 22 -#define ZYNOS_MAC_LEN 6 - -struct zynos_board_info { - unsigned char vendor[ZYNOS_NAME_LEN]; - unsigned char product[ZYNOS_NAME_LEN]; - u32 bootext_addr; - u32 res0; - u16 board_id; - u8 res1[6]; - u8 feat_other[ZYNOS_FEAT_BYTES]; - u8 feat_main; - u8 res2; - u8 mac[ZYNOS_MAC_LEN]; - u8 country; - u8 dbgflag; -} __attribute__ ((packed)); - -/* - * Vendor IDs - */ -#define ZYNOS_VENDOR_ID_ZYXEL 0 -#define ZYNOS_VENDOR_ID_NETGEAR 1 -#define ZYNOS_VENDOR_ID_DLINK 2 -#define ZYNOS_VENDOR_ID_OTHER 3 -#define ZYNOS_VENDOR_ID_LUCENT 4 - -/* - * Vendor names - */ -#define ZYNOS_VENDOR_DLINK "D-Link" -#define ZYNOS_VENDOR_LUCENT "LUCENT" -#define ZYNOS_VENDOR_NETGEAR "NetGear" -#define ZYNOS_VENDOR_ZYXEL "ZyXEL" - -/* - * Board IDs (big-endian) - */ -#define ZYNOS_BOARD_ES2108 0x00F2 /* Ethernet Switch 2108 */ -#define ZYNOS_BOARD_ES2108F 0x01AF /* Ethernet Switch 2108-F */ -#define ZYNOS_BOARD_ES2108G 0x00F3 /* Ethernet Switch 2108-G */ -#define ZYNOS_BOARD_ES2108LC 0x00FC /* Ethernet Switch 2108-LC */ -#define ZYNOS_BOARD_ES2108PWR 0x00F4 /* Ethernet Switch 2108PWR */ -#define ZYNOS_BOARD_HS100 0x9FF1 /* HomeSafe 100/100W */ -#define ZYNOS_BOARD_P334 0x9FF5 /* Prestige 334 */ -#define ZYNOS_BOARD_P334U 0x9FDD /* Prestige 334U */ -#define ZYNOS_BOARD_P334W 0x9FF3 /* Prestige 334W */ -#define ZYNOS_BOARD_P334WH 0x00E0 /* Prestige 334WH */ -#define ZYNOS_BOARD_P334WHD 0x00E1 /* Prestige 334WHD */ -#define ZYNOS_BOARD_P334WT 0x9FEF /* Prestige 334WT */ -#define ZYNOS_BOARD_P334WT_ALT 0x9F02 /* Prestige 334WT alternative*/ -#define ZYNOS_BOARD_P335 0x9FED /* Prestige 335/335WT */ -#define ZYNOS_BOARD_P335PLUS 0x0025 /* Prestige 335Plus */ -#define ZYNOS_BOARD_P335U 0x9FDC /* Prestige 335U */ - -/* - * Some magic numbers (big-endian) - */ -#define ZYNOS_MAGIC_DBGAREA1 0x48646267 /* "Hdbg" */ -#define ZYNOS_MAGIC_DBGAREA2 0x61726561 /* "area" */ - -struct bootbase_info { - u16 vendor_id; - u16 board_id; - u8 mac[6]; -}; - -extern struct bootbase_info bootbase_info; -extern int bootbase_present(void) __init; - -#endif /* _ZYNOS_H */ |