diff options
Diffstat (limited to 'target/linux/adm5120/files/arch/mips/adm5120/boards/mikrotik.c')
| -rw-r--r-- | target/linux/adm5120/files/arch/mips/adm5120/boards/mikrotik.c | 172 |
1 files changed, 172 insertions, 0 deletions
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/mikrotik.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/mikrotik.c new file mode 100644 index 000000000..f233772d0 --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/adm5120/boards/mikrotik.c @@ -0,0 +1,172 @@ +/* + * $Id$ + * + * Mikrotik RouterBOARDs 111/112/133/133C/150/153 + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/bootinfo.h> +#include <asm/gpio.h> + +#include <asm/mach-adm5120/adm5120_board.h> +#include <asm/mach-adm5120/adm5120_platform.h> + +static struct mtd_partition rb1xx_partitions[] = { + { + .name = "booter", + .offset = 0, + .size = 64*1024, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "firmware", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct platform_device *rb1xx_devices[] __initdata = { + &adm5120_flash0_device, + &adm5120_nand_device, +}; + +static struct platform_device *rb150_devices[] __initdata = { + &adm5120_flash0_device, + /* TODO: nand device is not yet supported */ +}; + +static void __init rb1xx_setup(void) +{ + /* setup data for flash0 device */ + adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_partitions); + adm5120_flash0_data.parts = rb1xx_partitions; + + /* TODO: setup mac address */ +} + +#if 0 +/* + * RB1xx boards have bad network performance with the default VLAN matrixes. + * Disable it while the ethernet driver gets fixed. + */ +static unsigned char rb11x_vlans[6] __initdata = { + /* FIXME: untested */ + 0x41, 0x00, 0x00, 0x00, 0x00, 0x00 +}; + +static unsigned char rb133_vlans[6] __initdata = { + /* FIXME: untested */ + 0x44, 0x42, 0x41, 0x00, 0x00, 0x00 +}; + +static unsigned char rb133c_vlans[6] __initdata = { + /* FIXME: untested */ + 0x44, 0x00, 0x00, 0x00, 0x00, 0x00 +}; + +static unsigned char rb15x_vlans[6] __initdata = { + /* FIXME: untested */ + 0x41, 0x42, 0x44, 0x48, 0x50, 0x00 +}; +#else +static unsigned char rb_vlans[6] __initdata = { + 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00 +}; +#define rb11x_vlans rb_vlans +#define rb133_vlans rb_vlans +#define rb133c_vlans rb_vlans +#define rb15x_vlans rb_vlans +#endif + +static struct adm5120_board rb111_board __initdata = { + .mach_type = MACH_ADM5120_RB_111, + .name = "Mikrotik RouterBOARD 111", + .board_setup = rb1xx_setup, + .eth_num_ports = 1, + .eth_vlans = rb11x_vlans, + .num_devices = ARRAY_SIZE(rb1xx_devices), + .devices = rb1xx_devices, +}; + +static struct adm5120_board rb112_board __initdata = { + .mach_type = MACH_ADM5120_RB_112, + .name = "Mikrotik RouterBOARD 112", + .board_setup = rb1xx_setup, + .eth_num_ports = 1, + .eth_vlans = rb11x_vlans, + .num_devices = ARRAY_SIZE(rb1xx_devices), + .devices = rb1xx_devices, +}; + +static struct adm5120_board rb133_board __initdata = { + .mach_type = MACH_ADM5120_RB_133, + .name = "Mikrotik RouterBOARD 133", + .board_setup = rb1xx_setup, + .eth_num_ports = 3, + .eth_vlans = rb133_vlans, + .num_devices = ARRAY_SIZE(rb1xx_devices), + .devices = rb1xx_devices, +}; + +static struct adm5120_board rb133c_board __initdata = { + .mach_type = MACH_ADM5120_RB_133C, + .name = "Mikrotik RouterBOARD 133C", + .board_setup = rb1xx_setup, + .eth_num_ports = 1, + .eth_vlans = rb133c_vlans, + .num_devices = ARRAY_SIZE(rb1xx_devices), + .devices = rb1xx_devices, +}; + +static struct adm5120_board rb150_board __initdata = { + .mach_type = MACH_ADM5120_RB_150, + .name = "Mikrotik RouterBOARD 150", + .board_setup = rb1xx_setup, + .eth_num_ports = 5, + .eth_vlans = rb15x_vlans, + .num_devices = ARRAY_SIZE(rb150_devices), + .devices = rb150_devices, +}; + +static struct adm5120_board rb153_board __initdata = { + .mach_type = MACH_ADM5120_RB_153, + .name = "Mikrotik RouterBOARD 153", + .board_setup = rb1xx_setup, + .eth_num_ports = 5, + .eth_vlans = rb15x_vlans, + .num_devices = ARRAY_SIZE(rb1xx_devices), + .devices = rb1xx_devices, +}; + +static int __init register_boards(void) +{ + adm5120_board_register(&rb111_board); + adm5120_board_register(&rb112_board); + adm5120_board_register(&rb133_board); + adm5120_board_register(&rb133c_board); + adm5120_board_register(&rb150_board); + adm5120_board_register(&rb153_board); + return 0; +} + +pure_initcall(register_boards); |