diff options
Diffstat (limited to 'target/linux/adm5120-2.6/image')
| -rw-r--r-- | target/linux/adm5120-2.6/image/Makefile | 14 | ||||
| -rw-r--r-- | target/linux/adm5120-2.6/image/lzma-loader/src/board.c | 20 |
2 files changed, 22 insertions, 12 deletions
diff --git a/target/linux/adm5120-2.6/image/Makefile b/target/linux/adm5120-2.6/image/Makefile index 732b82de3..352ebf480 100644 --- a/target/linux/adm5120-2.6/image/Makefile +++ b/target/linux/adm5120-2.6/image/Makefile @@ -82,7 +82,7 @@ root=/dev/mtdblock1 rootfstype=yaffs2 init=/etc/preinit endef define Image/Build/RouterBoard - $(CP) $(KDIR)/vmlinux.elf $(IMGNAME)-vmlinux + $(CP) $(KDIR)/vmlinux.elf $(IMGNAME)-rb1xx-vmlinux $(STAGING_DIR)/bin/patch-cmdline $(KDIR)/vmlinux.elf '$(strip $(call Image/cmdline/yaffs2)) ' endef @@ -91,6 +91,7 @@ define Image/Build ifneq ($(1),jffs2-256k) ifneq ($(1),jffs2-128k) $(call Image/Build/Compex,$(1),wp54g-wrt,$(patsubst jffs2-%,jffs2,$(1)),WP54G-WRT) +ifeq (CONFIG_DEVEL,y) $(call Image/Build/Edimax,$(1),br-6104k,$(patsubst jffs2-%,jffs2,$(1)),BR-6104K) $(call Image/Build/Edimax,$(1),br-6104kp,$(patsubst jffs2-%,jffs2,$(1)),BR-6104KP) $(call Image/Build/Edimax,$(1),br-6114wg,$(patsubst jffs2-%,jffs2,$(1)),BR-6114WG) @@ -117,6 +118,7 @@ ifneq ($(1),jffs2-128k) $(call Image/Build/MyLoader,$(1),wpp54ag,$(patsubst jffs2-%,jffs2,$(1)),WPP54AG) endif endif +endif ifeq ($(1),tgz) $(call Image/Build/RouterBoard) endif @@ -143,12 +145,17 @@ define Image/Build/LZMAKernel/Admboot $(call Image/Build/LZMAKernel,$(1),$(2),0x80500000,0x6D8,y,$(1)) endef +define Image/Build/Initramfs/RouterBoard + $(CP) $(KDIR)/vmlinux.elf $(IMGNAME)-ramfs-rb1xx.elf +endef + define Image/Build/Initramfs + $(call Image/Build/Initramfs/RouterBoard) + $(call Image/Build/LZMAKernel/Compex,wp54g-wrt,bin) +ifeq (CONFIG_DEVEL,y) $(call Image/Build/LZMAKernel/Generic,generic,bin) - $(call Image/Build/LZMAKernel/Generic,rb-100,elf) $(call Image/Build/LZMAKernel/Generic,np27g,bin) $(call Image/Build/LZMAKernel/Generic,wp54g,bin) - $(call Image/Build/LZMAKernel/Compex,wp54g-wrt,bin) $(call Image/Build/LZMAKernel/Admboot,br-6104k,gz) $(call Image/Build/LZMAKernel/Admboot,easy-5120,gz) $(call Image/Build/LZMAKernel/Admboot,easy-83000,gz) @@ -158,6 +165,7 @@ define Image/Build/Initramfs $(call Image/Build/LZMAKernel/Admboot,cas-771,gz) $(call Image/Build/LZMAKernel/Admboot,cas-790,gz) $(call Image/Build/LZMAKernel/Admboot,cas-861,gz) +endif endef $(eval $(call BuildImage)) diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/board.c b/target/linux/adm5120-2.6/image/lzma-loader/src/board.c index 616e7562a..baffe04ef 100644 --- a/target/linux/adm5120-2.6/image/lzma-loader/src/board.c +++ b/target/linux/adm5120-2.6/image/lzma-loader/src/board.c @@ -1,5 +1,5 @@ /* - * ADM5120 specific board support for LZMA decompressor + * ADM5120 specific board support for LZMA decompressor * * Copyright (C) 2007 OpenWrt.org * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu> @@ -24,7 +24,7 @@ #define READREG(r) *(volatile unsigned int *)(r) #define WRITEREG(r,v) *(volatile unsigned int *)(r) = v -/* +/* * INTC definitions */ #define INTC_BASE 0xB2200000 @@ -32,7 +32,7 @@ /* INTC registers */ #define INTC_REG_IRQ_DISABLE 0x0C -/* +/* * UART definitions */ #define UART_BASE 0xB2600000 @@ -61,7 +61,7 @@ #define UART_FLAG_RXFF ( 1 << 6 ) /* RX FIFO full */ #define UART_FLAG_TXFE ( 1 << 7 ) /* TX FIFO empty */ -/* +/* * SWITCH definitions */ #define SWITCH_BASE 0xB2000000 @@ -96,8 +96,9 @@ static void uart_init(void) { +#if 0 unsigned int t; - + /* disable uart */ UART_WRITE(UART_REG_CTRL, 0); @@ -106,7 +107,7 @@ static void uart_init(void) UART_WRITE(UART_REG_LCRM, t); t = UART_READ(UART_REG_LCRL); UART_WRITE(UART_REG_LCRL, t); - + /* keep data, stop, and parity bits, but disable FIFO */ t = UART_READ(UART_REG_LCRH); t &= ~(UART_LCRH_FEN); @@ -117,6 +118,7 @@ static void uart_init(void) /* enable uart, and disable interrupts */ UART_WRITE(UART_REG_CTRL, UART_CTRL_EN); +#endif } static void uart_putc(int ch) @@ -125,7 +127,7 @@ static void uart_putc(int ch) UART_WRITE(UART_REG_DATA, ch); - while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFF) != 0); + while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0); } /* @@ -150,7 +152,7 @@ static void intc_init(void) static void switch_init(void) { /* disable PHYS ports */ - SWITCH_WRITE(SWITCH_REG_PORT_CONF0, + SWITCH_WRITE(SWITCH_REG_PORT_CONF0, (SWITCH_PORTS_HW << PORT_CONF0_DP_SHIFT)); /* disable CPU port */ @@ -159,7 +161,7 @@ static void switch_init(void) /* disable GPIO lines */ SWITCH_WRITE(SWITCH_REG_GPIO_CONF0, 0); SWITCH_WRITE(SWITCH_REG_GPIO_CONF2, 0); - + /* disable LED lines */ SWITCH_WRITE(SWITCH_REG_PORT0_LED, 0); SWITCH_WRITE(SWITCH_REG_PORT1_LED, 0); |