diff options
Diffstat (limited to 'target/linux/adm5120-2.6/image')
14 files changed, 0 insertions, 2343 deletions
diff --git a/target/linux/adm5120-2.6/image/Makefile b/target/linux/adm5120-2.6/image/Makefile deleted file mode 100644 index 77b1c8975..000000000 --- a/target/linux/adm5120-2.6/image/Makefile +++ /dev/null @@ -1,177 +0,0 @@ -# -# Copyright (C) 2006,2007 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/image.mk - -IMGNAME = $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL) -LOADER_MAKE = $(NO_TRACE_MAKE) -C lzma-loader KDIR=$(KDIR) - -define Image/Build/Loader - $(LOADER_MAKE) LOADER=loader-$(1).$(2) LOADER_DATA="" \ - LZMA_TEXT_START=$(3) LZMA_STARTUP_ORG=$(4) \ - CONFIG_PASS_KARGS=$(5) CONFIG_BOARD=$(6) \ - compile loader.$(2) -endef - -define Build/Clean - $(LOADER_MAKE) clean -endef - -define Image/Prepare - cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma -endef - -define trxalign/jffs2-128k --a 0x20000 -endef -define trxalign/jffs2-64k --a 0x10000 -endef -define trxalign/squashfs --a 1024 -endef - -define Image/Build/TRX - $(STAGING_DIR_HOST)/bin/trx -o $(1) -f $(3) -f $(KDIR)/vmlinux.lzma \ - $(call trxalign/$(2)) -f $(KDIR)/root.$(2) -endef - -define Image/Build/TRXNoloader - $(STAGING_DIR_HOST)/bin/trx -o $(1) -f $(KDIR)/vmlinux.lzma \ - $(call trxalign/$(2)) -f $(KDIR)/root.$(2) -endef - -define Image/Build/Compex - $(call Image/Build/Loader,$(2),gz,0x80500000,0,y,$(2)) - $(call Image/Build/TRX,$(IMGNAME)-$(3)-$(2).trx,$(1),$(KDIR)/loader-$(2).gz) -endef - -define Image/Build/Edimax - $(call Image/Build/Loader,$(2),gz,0x80500000,0x6D8,y,$(2)) - $(call Image/Build/TRXNoloader,$(IMGNAME)-$(3)-$(2).trx,$(1)) - $(STAGING_DIR_HOST)/bin/mkcsysimg -B $(2) -d -w \ - -r $(KDIR)/loader-$(2).gz \ - -x $(IMGNAME)-$(3)-$(2).trx \ - $(IMGNAME)-$(3)-$(2).bin -endef - -define Image/Build/Infineon - $(call Image/Build/Loader,$(2),gz,0x80500000,0x6D8,y,$(2)) - $(call Image/Build/TRXNoloader,$(IMGNAME)-$(3)-$(2).trx,$(1)) - dd if=$(KDIR)/loader-$(2).gz of=$(IMGNAME)-$(3)-$(2).img bs=64k conv=sync - cat $(IMGNAME)-$(3)-$(2).trx >>$(IMGNAME)-$(3)-$(2).img -endef - -define Image/Build/MyLoader - $(call Image/Build/Loader,$(2),gz,0x80500000,0) - $(call Image/Build/TRXNoloader,$(IMGNAME)-$(3)-$(2).trx,$(1)) - $(STAGING_DIR_HOST)/bin/mkmylofw -B $(2) \ - -p0x20000:0x10000:ahp:0x80001000 \ - -p0x30000:0 \ - -b0x20000:0x10000:h:$(KDIR)/loader-$(2).gz \ - -b0x30000:0::$(IMGNAME)-$(3)-$(2).trx \ - $(IMGNAME)-$(3)-$(2).bin -endef - -define Image/cmdline/yaffs2 -root=/dev/mtdblock1 rootfstype=yaffs2 init=/etc/preinit -endef - -define Image/Build/RouterBoard - $(CP) $(KDIR)/vmlinux.elf $(IMGNAME)-rb1xx-vmlinux - $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux.elf '$(strip $(call Image/cmdline/yaffs2)) ' -endef - -define Image/Build/jffs2-64k - $(call Image/Build/Compex,$(1),wp54g-wrt,$(patsubst jffs2-%,jffs2,$(1))) -ifeq ($(CONFIG_DEVEL),y) - $(call Image/Build/Edimax,$(1),br-6104k,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Edimax,$(1),br-6104kp,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Edimax,$(1),br-6114wg,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Edimax,$(1),br-6524k,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Edimax,$(1),br-6524kp,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Edimax,$(1),br-6541k,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Edimax,$(1),br-6541kp,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Edimax,$(1),ew-7207apg,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Edimax,$(1),ps-1205uwg,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Edimax,$(1),ps-3205u,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Edimax,$(1),ps-3205uwg,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Edimax,$(1),br-6524wg,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Edimax,$(1),br-6524wp,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Infineon,$(1),easy-5120p-ata,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Infineon,$(1),easy-5120-rt,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Infineon,$(1),easy-5120-wvoip,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Infineon,$(1),easy-83000,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/MyLoader,$(1),np27g,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/MyLoader,$(1),np28g,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/MyLoader,$(1),np28ghs,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/MyLoader,$(1),wp54g,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/MyLoader,$(1),wp54ag,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/MyLoader,$(1),wpp54g,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/MyLoader,$(1),wpp54ag,$(patsubst jffs2-%,jffs2,$(1))) -endif -endef - -define Image/Build/squashfs -$(call Image/Build/jffs2-64k,$(1)) -endef - -define Image/Build -$(call Image/Build/$(1),$(1)) -endef - -ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y) - define Image/BuildKernel - $(call Image/Build/RouterBoard) - endef -endif - -define Image/Build/LZMAKernel - $(LOADER_MAKE) TARGET_DIR=$(BIN_DIR) \ - LOADER=openwrt-$(BOARD)-$(KERNEL)-ramfs-lzma-$(1).$(2) \ - LOADER_DATA=$(KDIR)/vmlinux.lzma \ - LZMA_TEXT_START=$(3) LZMA_STARTUP_ORG=$(4) \ - CONFIG_PASS_KARGS=$(5) CONFIG_BOARD=$(6) \ - compile loader.$(2) -endef - -define Image/Build/LZMAKernel/Compex - $(call Image/Build/LZMAKernel,$(1),$(2),0x80500000,0,y,$(1)) -endef - -define Image/Build/LZMAKernel/Generic - $(call Image/Build/LZMAKernel,$(1),$(2),0x80500000,0) -endef - -define Image/Build/LZMAKernel/Admboot - $(call Image/Build/LZMAKernel,$(1),$(2),0x80500000,0x6D8,y,$(1)) -endef - -define Image/Build/Initramfs/RouterBoard - $(CP) $(KDIR)/vmlinux.elf $(IMGNAME)-ramfs-rb1xx.elf -endef - -define Image/Build/Initramfs - $(call Image/Build/Initramfs/RouterBoard) - $(call Image/Build/LZMAKernel/Compex,wp54g-wrt,bin) -ifeq ($(CONFIG_DEVEL),y) - $(call Image/Build/LZMAKernel/Generic,generic,bin) - $(call Image/Build/LZMAKernel/Generic,np27g,bin) - $(call Image/Build/LZMAKernel/Generic,wp54g,bin) - $(call Image/Build/LZMAKernel/Admboot,br-6104k,gz) - $(call Image/Build/LZMAKernel/Admboot,easy-5120,gz) - $(call Image/Build/LZMAKernel/Admboot,easy-83000,gz) - $(call Image/Build/LZMAKernel/Admboot,cas-630,gz) - $(call Image/Build/LZMAKernel/Admboot,cas-670,gz) - $(call Image/Build/LZMAKernel/Admboot,cas-700,gz) - $(call Image/Build/LZMAKernel/Admboot,cas-771,gz) - $(call Image/Build/LZMAKernel/Admboot,cas-790,gz) - $(call Image/Build/LZMAKernel/Admboot,cas-861,gz) -endif -endef - -$(eval $(call BuildImage)) diff --git a/target/linux/adm5120-2.6/image/lzma-loader/Makefile b/target/linux/adm5120-2.6/image/lzma-loader/Makefile deleted file mode 100644 index 74866e765..000000000 --- a/target/linux/adm5120-2.6/image/lzma-loader/Makefile +++ /dev/null @@ -1,63 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -# $Id$ - -include $(TOPDIR)/rules.mk - -LOADER := loader.bin -LOADER_NAME := $(basename $(notdir $(LOADER))) -LOADER_DATA := -TARGET_DIR := - -ifeq ($(TARGET_DIR),) -TARGET_DIR := $(KDIR) -endif - -LOADER_BIN := $(TARGET_DIR)/$(LOADER_NAME).bin -LOADER_GZ := $(TARGET_DIR)/$(LOADER_NAME).gz -LOADER_ELF := $(TARGET_DIR)/$(LOADER_NAME).elf - -LZMA_STARTUP_ORG:= 0 -LZMA_TEXT_START := 0x80300000 - -PKG_NAME := lzma-loader -PKG_BUILD_DIR := $(KDIR)/$(PKG_NAME) - -.PHONY : loader-compile loader.bin loader.elf loader.gz - -$(PKG_BUILD_DIR)/.prepared: - mkdir $(PKG_BUILD_DIR) - $(CP) ./src/* $(PKG_BUILD_DIR)/ - touch $@ - -loader-compile: $(PKG_BUILD_DIR)/.prepared - $(MAKE) -C $(PKG_BUILD_DIR) CROSS_COMPILE="$(TARGET_CROSS)" \ - LZMA_STARTUP_ORG=$(LZMA_STARTUP_ORG) \ - LZMA_TEXT_START=$(LZMA_TEXT_START) \ - LOADER_DATA=$(LOADER_DATA) \ - CONFIG_BOARD=$(CONFIG_BOARD) \ - CONFIG_PASS_KARGS=$(CONFIG_PASS_KARGS) \ - clean all - -loader.gz: $(PKG_BUILD_DIR)/loader.bin - gzip -nc9 $< > $(LOADER_GZ) - -loader.elf: $(PKG_BUILD_DIR)/loader.elf - $(CP) $< $(LOADER_ELF) - -loader.bin: $(PKG_BUILD_DIR)/loader.bin - $(CP) $< $(LOADER_BIN) - -download: -prepare: $(PKG_BUILD_DIR)/.prepared -compile: loader-compile - -install: - -clean: - rm -rf $(PKG_BUILD_DIR) - diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/LzmaDecode.c b/target/linux/adm5120-2.6/image/lzma-loader/src/LzmaDecode.c deleted file mode 100644 index 75a358a9e..000000000 --- a/target/linux/adm5120-2.6/image/lzma-loader/src/LzmaDecode.c +++ /dev/null @@ -1,589 +0,0 @@ -/* - LzmaDecode.c - LZMA Decoder (optimized for Speed version) - - LZMA SDK 4.16 Copyright (c) 1999-2005 Igor Pavlov (2005-03-18) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this Code, expressly permits you to - statically or dynamically link your Code (or bind by name) to the - interfaces of this file without subjecting your linked Code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#include "LzmaDecode.h" - -#ifndef Byte -#define Byte unsigned char -#endif - -#define kNumTopBits 24 -#define kTopValue ((UInt32)1 << kNumTopBits) - -#define kNumBitModelTotalBits 11 -#define kBitModelTotal (1 << kNumBitModelTotalBits) -#define kNumMoveBits 5 - -#define RC_READ_BYTE (*Buffer++) - -#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \ - { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }} - -#ifdef _LZMA_IN_CB - -#define RC_TEST { if (Buffer == BufferLim) \ - { UInt32 size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \ - BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }} - -#define RC_INIT Buffer = BufferLim = 0; RC_INIT2 - -#else - -#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; } - -#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2 - -#endif - -#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; } - -#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound) -#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits; -#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits; - -#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \ - { UpdateBit0(p); mi <<= 1; A0; } else \ - { UpdateBit1(p); mi = (mi + mi) + 1; A1; } - -#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;) - -#define RangeDecoderBitTreeDecode(probs, numLevels, res) \ - { int i = numLevels; res = 1; \ - do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \ - res -= (1 << numLevels); } - - -#define kNumPosBitsMax 4 -#define kNumPosStatesMax (1 << kNumPosBitsMax) - -#define kLenNumLowBits 3 -#define kLenNumLowSymbols (1 << kLenNumLowBits) -#define kLenNumMidBits 3 -#define kLenNumMidSymbols (1 << kLenNumMidBits) -#define kLenNumHighBits 8 -#define kLenNumHighSymbols (1 << kLenNumHighBits) - -#define LenChoice 0 -#define LenChoice2 (LenChoice + 1) -#define LenLow (LenChoice2 + 1) -#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) -#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) -#define kNumLenProbs (LenHigh + kLenNumHighSymbols) - - -#define kNumStates 12 -#define kNumLitStates 7 - -#define kStartPosModelIndex 4 -#define kEndPosModelIndex 14 -#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) - -#define kNumPosSlotBits 6 -#define kNumLenToPosStates 4 - -#define kNumAlignBits 4 -#define kAlignTableSize (1 << kNumAlignBits) - -#define kMatchMinLen 2 - -#define IsMatch 0 -#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) -#define IsRepG0 (IsRep + kNumStates) -#define IsRepG1 (IsRepG0 + kNumStates) -#define IsRepG2 (IsRepG1 + kNumStates) -#define IsRep0Long (IsRepG2 + kNumStates) -#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) -#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) -#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) -#define LenCoder (Align + kAlignTableSize) -#define RepLenCoder (LenCoder + kNumLenProbs) -#define Literal (RepLenCoder + kNumLenProbs) - -#if Literal != LZMA_BASE_SIZE -StopCompilingDueBUG -#endif - -#ifdef _LZMA_OUT_READ - -typedef struct _LzmaVarState -{ - Byte *Buffer; - Byte *BufferLim; - UInt32 Range; - UInt32 Code; - #ifdef _LZMA_IN_CB - ILzmaInCallback *InCallback; - #endif - Byte *Dictionary; - UInt32 DictionarySize; - UInt32 DictionaryPos; - UInt32 GlobalPos; - UInt32 Reps[4]; - int lc; - int lp; - int pb; - int State; - int RemainLen; - Byte TempDictionary[4]; -} LzmaVarState; - -int LzmaDecoderInit( - unsigned char *buffer, UInt32 bufferSize, - int lc, int lp, int pb, - unsigned char *dictionary, UInt32 dictionarySize, - #ifdef _LZMA_IN_CB - ILzmaInCallback *InCallback - #else - unsigned char *inStream, UInt32 inSize - #endif - ) -{ - Byte *Buffer; - Byte *BufferLim; - UInt32 Range; - UInt32 Code; - LzmaVarState *vs = (LzmaVarState *)buffer; - CProb *p = (CProb *)(buffer + sizeof(LzmaVarState)); - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp)); - UInt32 i; - if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState)) - return LZMA_RESULT_NOT_ENOUGH_MEM; - vs->Dictionary = dictionary; - vs->DictionarySize = dictionarySize; - vs->DictionaryPos = 0; - vs->GlobalPos = 0; - vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1; - vs->lc = lc; - vs->lp = lp; - vs->pb = pb; - vs->State = 0; - vs->RemainLen = 0; - dictionary[dictionarySize - 1] = 0; - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - - #ifdef _LZMA_IN_CB - RC_INIT; - #else - RC_INIT(inStream, inSize); - #endif - vs->Buffer = Buffer; - vs->BufferLim = BufferLim; - vs->Range = Range; - vs->Code = Code; - #ifdef _LZMA_IN_CB - vs->InCallback = InCallback; - #endif - - return LZMA_RESULT_OK; -} - -int LzmaDecode(unsigned char *buffer, - unsigned char *outStream, UInt32 outSize, - UInt32 *outSizeProcessed) -{ - LzmaVarState *vs = (LzmaVarState *)buffer; - Byte *Buffer = vs->Buffer; - Byte *BufferLim = vs->BufferLim; - UInt32 Range = vs->Range; - UInt32 Code = vs->Code; - #ifdef _LZMA_IN_CB - ILzmaInCallback *InCallback = vs->InCallback; - #endif - CProb *p = (CProb *)(buffer + sizeof(LzmaVarState)); - int state = vs->State; - Byte previousByte; - UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3]; - UInt32 nowPos = 0; - UInt32 posStateMask = (1 << (vs->pb)) - 1; - UInt32 literalPosMask = (1 << (vs->lp)) - 1; - int lc = vs->lc; - int len = vs->RemainLen; - UInt32 globalPos = vs->GlobalPos; - - Byte *dictionary = vs->Dictionary; - UInt32 dictionarySize = vs->DictionarySize; - UInt32 dictionaryPos = vs->DictionaryPos; - - Byte tempDictionary[4]; - if (dictionarySize == 0) - { - dictionary = tempDictionary; - dictionarySize = 1; - tempDictionary[0] = vs->TempDictionary[0]; - } - - if (len == -1) - { - *outSizeProcessed = 0; - return LZMA_RESULT_OK; - } - - while(len != 0 && nowPos < outSize) - { - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos]; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - len--; - } - if (dictionaryPos == 0) - previousByte = dictionary[dictionarySize - 1]; - else - previousByte = dictionary[dictionaryPos - 1]; -#else - -int LzmaDecode( - Byte *buffer, UInt32 bufferSize, - int lc, int lp, int pb, - #ifdef _LZMA_IN_CB - ILzmaInCallback *InCallback, - #else - unsigned char *inStream, UInt32 inSize, - #endif - unsigned char *outStream, UInt32 outSize, - UInt32 *outSizeProcessed) -{ - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp)); - CProb *p = (CProb *)buffer; - - UInt32 i; - int state = 0; - Byte previousByte = 0; - UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1; - UInt32 nowPos = 0; - UInt32 posStateMask = (1 << pb) - 1; - UInt32 literalPosMask = (1 << lp) - 1; - int len = 0; - - Byte *Buffer; - Byte *BufferLim; - UInt32 Range; - UInt32 Code; - - if (bufferSize < numProbs * sizeof(CProb)) - return LZMA_RESULT_NOT_ENOUGH_MEM; - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - - - #ifdef _LZMA_IN_CB - RC_INIT; - #else - RC_INIT(inStream, inSize); - #endif -#endif - - *outSizeProcessed = 0; - while(nowPos < outSize) - { - CProb *prob; - UInt32 bound; - int posState = (int)( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - & posStateMask); - - prob = p + IsMatch + (state << kNumPosBitsMax) + posState; - IfBit0(prob) - { - int symbol = 1; - UpdateBit0(prob) - prob = p + Literal + (LZMA_LIT_SIZE * - ((( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - & literalPosMask) << lc) + (previousByte >> (8 - lc)))); - - if (state >= kNumLitStates) - { - int matchByte; - #ifdef _LZMA_OUT_READ - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - matchByte = dictionary[pos]; - #else - matchByte = outStream[nowPos - rep0]; - #endif - // prob += 0x100; - do - { - int bit; - CProb *probLit; - matchByte <<= 1; - bit = (matchByte & 0x100); - probLit = prob + 0x100 + bit + symbol; - RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break) - } - while (symbol < 0x100); - // prob -= 0x100; - } - while (symbol < 0x100) - { - CProb *probLit = prob + symbol; - RC_GET_BIT(probLit, symbol) - } - previousByte = (Byte)symbol; - - outStream[nowPos++] = previousByte; - #ifdef _LZMA_OUT_READ - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #endif - if (state < 4) state = 0; - else if (state < 10) state -= 3; - else state -= 6; - } - else - { - // int isItRep; - UpdateBit1(prob); - prob = p + IsRep + state; - IfBit0(prob) - { - UpdateBit0(prob); - rep3 = rep2; - rep2 = rep1; - rep1 = rep0; - state = state < kNumLitStates ? 0 : 3; - prob = p + LenCoder; - } - else - { - UpdateBit1(prob); - prob = p + IsRepG0 + state; - IfBit0(prob) - { - UpdateBit0(prob); - prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState; - IfBit0(prob) - { - #ifdef _LZMA_OUT_READ - UInt32 pos; - #endif - UpdateBit0(prob); - if (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - == 0) - return LZMA_RESULT_DATA_ERROR; - state = state < kNumLitStates ? 9 : 11; - #ifdef _LZMA_OUT_READ - pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - previousByte = dictionary[pos]; - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #else - previousByte = outStream[nowPos - rep0]; - #endif - outStream[nowPos++] = previousByte; - continue; - } - else - { - UpdateBit1(prob); - } - } - else - { - UInt32 distance; - UpdateBit1(prob); - prob = p + IsRepG1 + state; - IfBit0(prob) - { - UpdateBit0(prob); - distance = rep1; - } - else - { - UpdateBit1(prob); - prob = p + IsRepG2 + state; - IfBit0(prob) - { - UpdateBit0(prob); - distance = rep2; - } - else - { - UpdateBit1(prob); - distance = rep3; - rep3 = rep2; - } - rep2 = rep1; - } - rep1 = rep0; - rep0 = distance; - } - state = state < kNumLitStates ? 8 : 11; - prob = p + RepLenCoder; - } - { - int numBits, offset; - CProb *probLen = prob + LenChoice; - IfBit0(probLen) - { - UpdateBit0(probLen); - probLen = prob + LenLow + (posState << kLenNumLowBits); - offset = 0; - numBits = kLenNumLowBits; - } - else - { - UpdateBit1(probLen); - probLen = prob + LenChoice2; - IfBit0(probLen) - { - UpdateBit0(probLen); - probLen = prob + LenMid + (posState << kLenNumMidBits); - offset = kLenNumLowSymbols; - numBits = kLenNumMidBits; - } - else - { - UpdateBit1(probLen); - probLen = prob + LenHigh; - offset = kLenNumLowSymbols + kLenNumMidSymbols; - numBits = kLenNumHighBits; - } - } - RangeDecoderBitTreeDecode(probLen, numBits, len); - len += offset; - } - - if (state < 4) - { - int posSlot; - state += kNumLitStates; - prob = p + PosSlot + - ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << - kNumPosSlotBits); - RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot); - if (posSlot >= kStartPosModelIndex) - { - int numDirectBits = ((posSlot >> 1) - 1); - rep0 = (2 | ((UInt32)posSlot & 1)); - if (posSlot < kEndPosModelIndex) - { - rep0 <<= numDirectBits; - prob = p + SpecPos + rep0 - posSlot - 1; - } - else - { - numDirectBits -= kNumAlignBits; - do - { - RC_NORMALIZE - Range >>= 1; - rep0 <<= 1; - if (Code >= Range) - { - Code -= Range; - rep0 |= 1; - } - } - while (--numDirectBits != 0); - prob = p + Align; - rep0 <<= kNumAlignBits; - numDirectBits = kNumAlignBits; - } - { - int i = 1; - int mi = 1; - do - { - CProb *prob3 = prob + mi; - RC_GET_BIT2(prob3, mi, ; , rep0 |= i); - i <<= 1; - } - while(--numDirectBits != 0); - } - } - else - rep0 = posSlot; - if (++rep0 == (UInt32)(0)) - { - /* it's for stream version */ - len = -1; - break; - } - } - - len += kMatchMinLen; - if (rep0 > nowPos - #ifdef _LZMA_OUT_READ - + globalPos || rep0 > dictionarySize - #endif - ) - return LZMA_RESULT_DATA_ERROR; - do - { - #ifdef _LZMA_OUT_READ - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - previousByte = dictionary[pos]; - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #else - previousByte = outStream[nowPos - rep0]; - #endif - len--; - outStream[nowPos++] = previousByte; - } - while(len != 0 && nowPos < outSize); - } - } - RC_NORMALIZE; - - #ifdef _LZMA_OUT_READ - vs->Buffer = Buffer; - vs->BufferLim = BufferLim; - vs->Range = Range; - vs->Code = Code; - vs->DictionaryPos = dictionaryPos; - vs->GlobalPos = globalPos + nowPos; - vs->Reps[0] = rep0; - vs->Reps[1] = rep1; - vs->Reps[2] = rep2; - vs->Reps[3] = rep3; - vs->State = state; - vs->RemainLen = len; - vs->TempDictionary[0] = tempDictionary[0]; - #endif - - *outSizeProcessed = nowPos; - return LZMA_RESULT_OK; -} diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/LzmaDecode.h b/target/linux/adm5120-2.6/image/lzma-loader/src/LzmaDecode.h deleted file mode 100644 index 53677350a..000000000 --- a/target/linux/adm5120-2.6/image/lzma-loader/src/LzmaDecode.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - LzmaDecode.h - LZMA Decoder interface - - LZMA SDK 4.16 Copyright (c) 1999-2005 Igor Pavlov (2005-03-18) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this code, expressly permits you to - statically or dynamically link your code (or bind by name) to the - interfaces of this file without subjecting your linked code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#ifndef __LZMADECODE_H -#define __LZMADECODE_H - -/* #define _LZMA_IN_CB */ -/* Use callback for input data */ - -/* #define _LZMA_OUT_READ */ -/* Use read function for output data */ - -/* #define _LZMA_PROB32 */ -/* It can increase speed on some 32-bit CPUs, - but memory usage will be doubled in that case */ - -/* #define _LZMA_LOC_OPT */ -/* Enable local speed optimizations inside code */ - -#ifndef UInt32 -#ifdef _LZMA_UINT32_IS_ULONG -#define UInt32 unsigned long -#else -#define UInt32 unsigned int -#endif -#endif - -#ifdef _LZMA_PROB32 -#define CProb UInt32 -#else -#define CProb unsigned short -#endif - -#define LZMA_RESULT_OK 0 -#define LZMA_RESULT_DATA_ERROR 1 -#define LZMA_RESULT_NOT_ENOUGH_MEM 2 - -#ifdef _LZMA_IN_CB -typedef struct _ILzmaInCallback -{ - int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize); -} ILzmaInCallback; -#endif - -#define LZMA_BASE_SIZE 1846 -#define LZMA_LIT_SIZE 768 - -/* -bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb) -bufferSize += 100 in case of _LZMA_OUT_READ -by default CProb is unsigned short, -but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int) -*/ - -#ifdef _LZMA_OUT_READ -int LzmaDecoderInit( - unsigned char *buffer, UInt32 bufferSize, - int lc, int lp, int pb, - unsigned char *dictionary, UInt32 dictionarySize, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback - #else - unsigned char *inStream, UInt32 inSize - #endif -); -#endif - -int LzmaDecode( - unsigned char *buffer, - #ifndef _LZMA_OUT_READ - UInt32 bufferSize, - int lc, int lp, int pb, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback, - #else - unsigned char *inStream, UInt32 inSize, - #endif - #endif - unsigned char *outStream, UInt32 outSize, - UInt32 *outSizeProcessed); - -#endif diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/Makefile b/target/linux/adm5120-2.6/image/lzma-loader/src/Makefile deleted file mode 100644 index a553b7fde..000000000 --- a/target/linux/adm5120-2.6/image/lzma-loader/src/Makefile +++ /dev/null @@ -1,99 +0,0 @@ -# -# Makefile for Broadcom BCM947XX boards -# -# Copyright 2001-2003, Broadcom Corporation -# All Rights Reserved. -# -# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -# -# Copyright 2004 Manuel Novoa III <mjn3@codepoet.org> -# Modified to support bzip'd kernels. -# Of course, it would be better to integrate bunzip capability into CFE. -# -# Copyright 2005 Oleg I. Vdovikin <oleg@cs.msu.su> -# Cleaned up, modified for lzma support, removed from kernel -# -# Copyright 2007 Gabor Juhos <juhosg at openwrt.org> -# Modified to support user defined entry point address. -# Added support for make targets with different names -# - -LOADADDR := 0x80001000 -LZMA_TEXT_START := 0x80500000 -LZMA_STARTUP_ORG:= 0 -LOADER_DATA := -CONFIG_PASS_KARGS := -CONFIG_BOARD := - -CC := $(CROSS_COMPILE)gcc -LD := $(CROSS_COMPILE)ld -OBJCOPY := $(CROSS_COMPILE)objcopy -OBJDUMP := $(CROSS_COMPILE)objdump - -BIN_FLAGS := -O binary -R .reginfo -R .note -R .comment -R .mdebug -S - -CFLAGS = -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \ - -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic \ - -ffunction-sections -pipe -mlong-calls -fno-common \ - -ffreestanding \ - -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap -CFLAGS += -DLOADADDR=$(LOADADDR) - -ASFLAGS = $(CFLAGS) -D__ASSEMBLY__ -DLZMA_STARTUP_ORG=$(LZMA_STARTUP_ORG) - -LDFLAGS = -static --gc-sections -no-warn-mismatch -LDFLAGS += -e startup -T loader.lds -Ttext $(LZMA_TEXT_START) - -O_FORMAT = $(shell $(OBJDUMP) -i | head -2 | grep elf32) - -OBJECTS := head.o decompress.o board.o printf.o LzmaDecode.o - -ifneq ($(strip $(LOADER_DATA)),) -OBJECTS += data.o -CFLAGS += -DLZMA_WRAPPER=1 -else -CFLAGS += -D_LZMA_IN_CB -endif - -ifneq ($(strip $(CONFIG_PASS_KARGS)),) -CFLAGS += -DCONFIG_PASS_KARGS -endif - -BOARD_DEF := $(strip $(CONFIG_BOARD)) -BOARD_DEF := $(shell echo $(BOARD_DEF) | tr a-z A-Z | tr -d -) -ifneq ($(BOARD_DEF),) -CFLAGS += -DCONFIG_BOARD_$(BOARD_DEF) -endif - -all: loader.bin - -# Don't build dependencies, this may die if $(CC) isn't gcc -dep: - -install: - -%.o : %.c - $(CC) $(CFLAGS) -c -o $@ $< - -%.o : %.S - $(CC) $(ASFLAGS) -c -o $@ $< - -data.o: $(LOADER_DATA) - $(LD) -r -b binary --oformat $(O_FORMAT) -T lzma-data.lds -o $@ $< - -loader.bin: loader.elf - $(OBJCOPY) $(BIN_FLAGS) $< $@ - -loader.elf: $(OBJECTS) - $(LD) $(LDFLAGS) -o $@ $(OBJECTS) - -mrproper: clean - -clean: - rm -f *.elf *.bin *.o - - - diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/README b/target/linux/adm5120-2.6/image/lzma-loader/src/README deleted file mode 100644 index 16649e950..000000000 --- a/target/linux/adm5120-2.6/image/lzma-loader/src/README +++ /dev/null @@ -1,55 +0,0 @@ -/* - * LZMA compressed kernel decompressor for bcm947xx boards - * - * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -The code is intended to decompress kernel, being compressed using lzma utility -build using 7zip LZMA SDK. This utility is located in the LZMA_Alone directory - -decompressor code expects that your .trx file consist of three partitions: - -1) decompressor itself (this is gziped code which pmon/cfe will extract and run -on boot-up instead of real kernel) -2) LZMA compressed kernel (both streamed and regular modes are supported now) -3) Root filesystem - -Please be sure to apply the following patch for use this new trx layout (it will -allow using both new and old trx files for root filesystem lookup code) - ---- linuz/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:24:27.503322896 +0300 -+++ linux/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:29:05.237100944 +0300 -@@ -221,7 +221,9 @@ - /* Try looking at TRX header for rootfs offset */ - if (le32_to_cpu(trx->magic) == TRX_MAGIC) { - bcm947xx_parts[1].offset = off; -- if (le32_to_cpu(trx->offsets[1]) > off) -+ if (le32_to_cpu(trx->offsets[2]) > off) -+ off = le32_to_cpu(trx->offsets[2]); -+ else if (le32_to_cpu(trx->offsets[1]) > off) - off = le32_to_cpu(trx->offsets[1]); - continue; - } - - -Revision history: - 0.02 Initial release - 0.03 Added Mineharu Takahara <mtakahar@yahoo.com> patch to pass actual - output size to decoder (stream mode compressed input is not - a requirement anymore) - 0.04 Reordered functions using lds script diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/board.c b/target/linux/adm5120-2.6/image/lzma-loader/src/board.c deleted file mode 100644 index 22317f968..000000000 --- a/target/linux/adm5120-2.6/image/lzma-loader/src/board.c +++ /dev/null @@ -1,178 +0,0 @@ -/* - * ADM5120 specific board support for LZMA decompressor - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <stddef.h> - -#define READREG(r) *(volatile unsigned int *)(r) -#define WRITEREG(r,v) *(volatile unsigned int *)(r) = v - -/* - * INTC definitions - */ -#define INTC_BASE 0xB2200000 - -/* INTC registers */ -#define INTC_REG_IRQ_DISABLE 0x0C - -/* - * UART definitions - */ -#define UART_BASE 0xB2600000 -/* UART registers */ -#define UART_REG_DATA 0x00 /* Data register */ -#define UART_REG_ECR 0x04 /* Error Clear register */ -#define UART_REG_LCRH 0x08 /* Line Control High register */ -#define UART_REG_LCRM 0x0C /* Line Control Middle register */ -#define UART_REG_LCRL 0x10 /* Line Control Low register */ -#define UART_REG_CTRL 0x14 /* Control register */ -#define UART_REG_FLAG 0x18 /* Flag register */ - -/* Control register bits */ -#define UART_CTRL_EN ( 1 << 0 ) /* UART enable */ - -/* Line Control High register bits */ -#define UART_LCRH_FEN ( 1 << 4 ) /* FIFO enable */ - -/* Flag register bits */ -#define UART_FLAG_CTS ( 1 << 0 ) -#define UART_FLAG_DSR ( 1 << 1 ) -#define UART_FLAG_DCD ( 1 << 2 ) -#define UART_FLAG_BUSY ( 1 << 3 ) -#define UART_FLAG_RXFE ( 1 << 4 ) /* RX FIFO empty */ -#define UART_FLAG_TXFF ( 1 << 5 ) /* TX FIFO full */ -#define UART_FLAG_RXFF ( 1 << 6 ) /* RX FIFO full */ -#define UART_FLAG_TXFE ( 1 << 7 ) /* TX FIFO empty */ - -/* - * SWITCH definitions - */ -#define SWITCH_BASE 0xB2000000 - -#define SWITCH_REG_CPUP_CONF 0x0024 -#define SWITCH_REG_PORT_CONF0 0x0028 - -#define SWITCH_REG_GPIO_CONF0 0x00B8 -#define SWITCH_REG_GPIO_CONF2 0x00BC - -#define SWITCH_REG_PORT0_LED 0x0100 -#define SWITCH_REG_PORT1_LED 0x0104 -#define SWITCH_REG_PORT2_LED 0x0108 -#define SWITCH_REG_PORT3_LED 0x010C -#define SWITCH_REG_PORT4_LED 0x0110 - -#define SWITCH_PORTS_HW 0x3F /* Hardware Ports */ - -/* CPUP_CONF register bits */ -#define CPUP_CONF_DCPUP ( 1 << 0 ) /* Disable CPU port */ - -/* PORT_CONF0 register bits */ -#define PORT_CONF0_DP_SHIFT 0 /* disable port shift*/ - - -/* - * UART routines - */ - -#define UART_READ(r) READREG(UART_BASE+(r)) -#define UART_WRITE(r,v) WRITEREG(UART_BASE+(r),(v)) - -static void uart_init(void) -{ -#if 0 - unsigned int t; - - /* disable uart */ - UART_WRITE(UART_REG_CTRL, 0); - - /* keep current baud rate */ - t = UART_READ(UART_REG_LCRM); - UART_WRITE(UART_REG_LCRM, t); - t = UART_READ(UART_REG_LCRL); - UART_WRITE(UART_REG_LCRL, t); - - /* keep data, stop, and parity bits, but disable FIFO */ - t = UART_READ(UART_REG_LCRH); - t &= ~(UART_LCRH_FEN); - UART_WRITE(UART_REG_LCRH, t ); - - /* clear error bits */ - UART_WRITE(UART_REG_ECR, 0xFF); - - /* enable uart, and disable interrupts */ - UART_WRITE(UART_REG_CTRL, UART_CTRL_EN); -#endif -} - -/* - * INTC routines - */ - -#define INTC_READ(r) READREG(INTC_BASE+(r)) -#define INTC_WRITE(r,v) WRITEREG(INTC_BASE+(r),v) - -static void intc_init(void) -{ - INTC_WRITE(INTC_REG_IRQ_DISABLE, 0xFFFFFFFF); -} - -/* - * SWITCH routines - */ - -#define SWITCH_READ(r) READREG(SWITCH_BASE+(r)) -#define SWITCH_WRITE(r,v) WRITEREG(SWITCH_BASE+(r),v) - -static void switch_init(void) -{ - /* disable PHYS ports */ - SWITCH_WRITE(SWITCH_REG_PORT_CONF0, - (SWITCH_PORTS_HW << PORT_CONF0_DP_SHIFT)); - - /* disable CPU port */ - SWITCH_WRITE(SWITCH_REG_CPUP_CONF, CPUP_CONF_DCPUP); - - /* disable GPIO lines */ - SWITCH_WRITE(SWITCH_REG_GPIO_CONF0, 0); - SWITCH_WRITE(SWITCH_REG_GPIO_CONF2, 0); - - /* disable LED lines */ - SWITCH_WRITE(SWITCH_REG_PORT0_LED, 0); - SWITCH_WRITE(SWITCH_REG_PORT1_LED, 0); - SWITCH_WRITE(SWITCH_REG_PORT2_LED, 0); - SWITCH_WRITE(SWITCH_REG_PORT3_LED, 0); - SWITCH_WRITE(SWITCH_REG_PORT4_LED, 0); -} - -void board_putc(int ch) -{ - while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0); - - UART_WRITE(UART_REG_DATA, ch); - - while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0); -} - -void board_init(void) -{ - intc_init(); - switch_init(); - uart_init(); -} diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/config.h b/target/linux/adm5120-2.6/image/lzma-loader/src/config.h deleted file mode 100644 index 310189c6d..000000000 --- a/target/linux/adm5120-2.6/image/lzma-loader/src/config.h +++ /dev/null @@ -1,119 +0,0 @@ -#ifndef _CONFIG_H_ -#define _CONFIG_H_ - -#define FLASH_2M (2<<20) -#define FLASH_4M (4<<20) - -/* - * Cellvision/SparkLAN boards - */ - -#if defined(CONFIG_BOARD_CAS630) -# define CONFIG_BOARD_NAME "CAS-630" -# define CONFIG_FLASH_SIZE FLASH_4M -#endif - -#if defined(CONFIG_BOARD_CAS670) -# define CONFIG_BOARD_NAME "CAS-670" -# define CONFIG_FLASH_SIZE FLASH_4M -#endif - -#if defined(CONFIG_BOARD_CAS700) -# define CONFIG_BOARD_NAME "CAS-700" -# define CONFIG_FLASH_SIZE FLASH_4M -#endif - -#if defined(CONFIG_BOARD_CAS790) -# define CONFIG_BOARD_NAME "CAS-790" -# define CONFIG_FLASH_SIZE FLASH_4M -#endif - -#if defined(CONFIG_BOARD_CAS771) -# define CONFIG_BOARD_NAME "CAS-771" -# define CONFIG_FLASH_SIZE FLASH_4M -#endif - -#if defined(CONFIG_BOARD_CAS861) -# define CONFIG_BOARD_NAME "CAS-861" -# define CONFIG_FLASH_SIZE FLASH_4M -#endif - -#if defined(CONFIG_BOARD_NFS101U) -# define CONFIG_BOARD_NAME "NFS-101U" -# define CONFIG_FLASH_SIZE FLASH_4M -#endif - -#if defined(CONFIG_BOARD_NFS202U) -# define CONFIG_BOARD_NAME "NFS-202U" -# define CONFIG_FLASH_SIZE FLASH_4M -#endif - -/* - * Compex boards - */ -#if defined(CONFIG_BOARD_WP54GWRT) -# define CONFIG_BOARD_NAME "WP54G-WRT" -# define CONFIG_FLASH_SIZE FLASH_4M -#endif - -/* - * Edimax boards - */ -#if defined(CONFIG_BOARD_BR6104K) -# define CONFIG_BOARD_NAME "BR-6104K" -# define CONFIG_FLASH_SIZE FLASH_2M -#endif - -#if defined(CONFIG_BOARD_BR6104KP) -# define CONFIG_BOARD_NAME "BR-6104KP" -# define CONFIG_FLASH_SIZE FLASH_2M -#endif - -/* - * Infineon boards - */ -#if defined(CONFIG_BOARD_EASY5120PATA) -# define CONFIG_BOARD_NAME "EASY 5120P-ATA" -# define CONFIG_FLASH_SIZE FLASH_4M -#endif - -#if defined(CONFIG_BOARD_EASY5120RT) -# define CONFIG_BOARD_NAME "EASY 5120-RT" -# define CONFIG_FLASH_SIZE FLASH_4M -#endif - -#if defined(CONFIG_BOARD_EASY5120WVOIP) -# define CONFIG_BOARD_NAME "EASY 5120-WVOIP" -# define CONFIG_FLASH_SIZE FLASH_4M -#endif - -#if defined(CONFIG_BOARD_EASY83000) -# define CONFIG_BOARD_NAME "EASY 83000" -# define CONFIG_FLASH_SIZE FLASH_4M -#endif - -/* - * ZyXEL boards - */ -#if defined(CONFIG_BOARD_P334WT) -# define CONFIG_BOARD_NAME "P-334WT" -# define CONFIG_FLASH_SIZE FLASH_4M -#endif - -#if defined(CONFIG_BOARD_P335) -# define CONFIG_BOARD_NAME "P-335" -# define CONFIG_FLASH_SIZE FLASH_4M -#endif - -/* - * Default values - */ -#ifndef CONFIG_BOARD_NAME -# define CONFIG_BOARD_NAME "ADM5120" -#endif - -#ifndef CONFIG_FLASH_SIZE -# define CONFIG_FLASH_SIZE FLASH_2M -#endif - -#endif /* _CONFIG_H_ */ diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/decompress.c b/target/linux/adm5120-2.6/image/lzma-loader/src/decompress.c deleted file mode 100644 index 9e2a04c99..000000000 --- a/target/linux/adm5120-2.6/image/lzma-loader/src/decompress.c +++ /dev/null @@ -1,349 +0,0 @@ -/* - * $Id$ - * - * LZMA compressed kernel decompressor for ADM5120 boards - * - * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su> - * Copyright (C) 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * - * Please note, this was code based on the bunzip2 decompressor code - * by Manuel Novoa III (mjn3@codepoet.org), although the only thing left - * is an idea and part of original vendor code - * - * - * 12-Mar-2005 Mineharu Takahara <mtakahar@yahoo.com> - * pass actual output size to decoder (stream mode - * compressed input is not a requirement anymore) - * - * 24-Apr-2005 Oleg I. Vdovikin - * reordered functions using lds script, removed forward decl - * - * 24-Mar-2007 Gabor Juhos - * pass original values of the a0,a1,a2,a3 registers to the kernel - * - * 19-May-2007 Gabor Juhos - * endiannes related cleanups - * add support for decompressing an embedded kernel - * - */ - -#include <stddef.h> - -#include "config.h" -#include "printf.h" -#include "LzmaDecode.h" - -#define ADM5120_FLASH_START 0x1fc00000 /* Flash start */ -#define ADM5120_FLASH_END 0x1fe00000 /* Flash end */ - -#define KSEG0 0x80000000 -#define KSEG1 0xa0000000 - -#define KSEG1ADDR(a) ((((unsigned)(a)) & 0x1fffffffU) | KSEG1) - -#define Index_Invalidate_I 0x00 -#define Index_Writeback_Inv_D 0x01 - -#define cache_unroll(base,op) \ - __asm__ __volatile__( \ - ".set noreorder;\n" \ - ".set mips3;\n" \ - "cache %1, (%0);\n" \ - ".set mips0;\n" \ - ".set reorder\n" \ - : \ - : "r" (base), \ - "i" (op)); - -#ifdef LZMA_DEBUG -# define DBG(f, a...) printf(f, ## a) -#else -# define DBG(f, a...) do {} while (0) -#endif - -static __inline__ void blast_icache(unsigned long size, unsigned long lsize) -{ - unsigned long start = KSEG0; - unsigned long end = (start + size); - - while(start < end) { - cache_unroll(start,Index_Invalidate_I); - start += lsize; - } -} - -static __inline__ void blast_dcache(unsigned long size, unsigned long lsize) -{ - unsigned long start = KSEG0; - unsigned long end = (start + size); - - while(start < end) { - cache_unroll(start,Index_Writeback_Inv_D); - start += lsize; - } -} - -#define TRX_MAGIC 0x30524448 /* "HDR0" */ -#define TRX_ALIGN 0x1000 - -struct trx_header { - unsigned int magic; /* "HDR0" */ - unsigned int len; /* Length of file including header */ - unsigned int crc32; /* 32-bit CRC from flag_version to end of file */ - unsigned int flag_version; /* 0:15 flags, 16:31 version */ - unsigned int offsets[3]; /* Offsets of partitions from start of header */ -}; - -struct env_var { - char *name; - char *value; -}; - -/* beyound the image end, size not known in advance */ -extern unsigned char workspace[]; -extern void board_init(void); - -typedef void (*kernel_entry)(unsigned long reg_a0, unsigned long reg_a1, - unsigned long reg_a2, unsigned long reg_a3); - -static int decompress_data(unsigned char *buffer, UInt32 bufferSize, - int lc, int lp, int pb, unsigned char *outStream, UInt32 outSize, - UInt32 *outSizeProcessed); - -#ifdef CONFIG_PASS_KARGS -#define ENVV(n,v) {.name = (n), .value = (v)} -struct env_var env_vars[] = { - ENVV("board_name", CONFIG_BOARD_NAME), - ENVV(NULL, NULL) -}; -#endif - -static void halt(void) -{ - printf("\nSystem halted!\n"); - for(;;); -} - -#if LZMA_WRAPPER -extern unsigned char _lzma_data_start[]; -extern unsigned char _lzma_data_end[]; - -unsigned char *data; -unsigned long datalen; - -static __inline__ unsigned char get_byte(void) -{ - datalen--; - return *data++; -} - -static void decompress_init(void) -{ - data = _lzma_data_start; - datalen = _lzma_data_end - _lzma_data_start; -} - -static int decompress_data(unsigned char *buffer, UInt32 bufferSize, - int lc, int lp, int pb, unsigned char *outStream, UInt32 outSize, - UInt32 *outSizeProcessed) -{ - return LzmaDecode(buffer, bufferSize, lc, lp, pb, data, datalen, - outStream, outSize, outSizeProcessed); -} -#endif /* LZMA_WRAPPER */ - -#if !(LZMA_WRAPPER) - -#define FLASH_BANK_SIZE (2<<20) - -static unsigned char *flash_base = (unsigned char *) KSEG1ADDR(ADM5120_FLASH_START); -static unsigned long flash_ofs = 0; -static unsigned long flash_max = 0; -static unsigned long flash_ofs_mask = (FLASH_BANK_SIZE-1); - -static __inline__ unsigned char get_byte(void) -{ - return *(flash_base+flash_ofs++); -} - -static int lzma_read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize) -{ - unsigned long len; - - if (flash_ofs >= flash_max) - return LZMA_RESULT_DATA_ERROR; - - len = flash_max-flash_ofs; - -#if (CONFIG_FLASH_SIZE > FLASH_BANK_SIZE) - if (flash_ofs < FLASH_BANK_SIZE) { - /* switch to bank 0 */ - DBG("lzma_read_byte: switch to bank 0\n"); - - if (len > FLASH_BANK_SIZE-flash_ofs) - len = FLASH_BANK_SIZE-flash_ofs; - } else { - /* switch to bank 1 */ - DBG("lzma_read_byte: switch to bank 1\n"); - } -#endif - DBG("lzma_read_byte: ofs=%08X, len=%08X\n", flash_ofs, len); - - *buffer = flash_base+(flash_ofs & flash_ofs_mask); - *bufferSize = len; - flash_ofs += len; - - return LZMA_RESULT_OK; -} - -static ILzmaInCallback lzma_callback = { - .Read = lzma_read_byte, -}; - -static __inline__ unsigned int read_le32(void *buf) -{ - unsigned char *p = buf; - - return ((unsigned int)p[0] + ((unsigned int)p[1] << 8) + - ((unsigned int)p[2] << 16) +((unsigned int)p[3] << 24)); -} - -static void decompress_init(void) -{ - struct trx_header *hdr = NULL; - unsigned long kofs,klen; - - printf("Looking for TRX header... "); - /* look for trx header, 32-bit data access */ - for (flash_ofs = 0; flash_ofs < FLASH_BANK_SIZE; flash_ofs += TRX_ALIGN) { - if (read_le32(&flash_base[flash_ofs]) == TRX_MAGIC) { - hdr = (struct trx_header *)&flash_base[flash_ofs]; - break; - } - } - - if (hdr == NULL) { - printf("not found!\n"); - /* no compressed kernel found, halting */ - halt(); - } - - /* compressed kernel is in the partition 0 or 1 */ - kofs = read_le32(&hdr->offsets[1]); - if (kofs == 0 || kofs > 65536) { - klen = kofs-read_le32(&hdr->offsets[0]); - kofs = read_le32(&hdr->offsets[0]); - } else { - klen = read_le32(&hdr->offsets[2]); - if (klen > kofs) - klen -= kofs; - else - klen = read_le32(&hdr->len)-kofs; - } - - printf("found at %08X, kernel:%08X len:%08X\n", flash_ofs, - kofs, klen); - - flash_ofs += kofs; - flash_max = flash_ofs+klen; -} - -static int decompress_data(unsigned char *buffer, UInt32 bufferSize, - int lc, int lp, int pb, unsigned char *outStream, UInt32 outSize, - UInt32 *outSizeProcessed) -{ - return LzmaDecode(buffer, bufferSize, lc, lp, pb, &lzma_callback, - outStream, outSize, outSizeProcessed); -} -#endif /* !(LZMA_WRAPPER) */ - -/* should be the first function */ -void decompress_entry(unsigned long reg_a0, unsigned long reg_a1, - unsigned long reg_a2, unsigned long reg_a3, - unsigned long icache_size, unsigned long icache_lsize, - unsigned long dcache_size, unsigned long dcache_lsize) -{ - unsigned int i; /* temp value */ - unsigned int lc; /* literal context bits */ - unsigned int lp; /* literal pos state bits */ - unsigned int pb; /* pos state bits */ - unsigned int osize; /* uncompressed size */ - int res; - - board_init(); - - printf("\n\nLZMA loader for " CONFIG_BOARD_NAME - ", Copyright (C) 2007 OpenWrt.org\n\n"); - - decompress_init(); - - /* lzma args */ - i = get_byte(); - lc = i % 9, i = i / 9; - lp = i % 5, pb = i / 5; - - /* skip rest of the LZMA coder property */ - for (i = 0; i < 4; i++) - get_byte(); - - /* read the lower half of uncompressed size in the header */ - osize = ((unsigned int)get_byte()) + - ((unsigned int)get_byte() << 8) + - ((unsigned int)get_byte() << 16) + - ((unsigned int)get_byte() << 24); - - /* skip rest of the header (upper half of uncompressed size) */ - for (i = 0; i < 4; i++) - get_byte(); - - printf("decompressing kernel... "); - - /* decompress kernel */ - res = decompress_data(workspace, ~0, lc, lp, pb, - (unsigned char *)LOADADDR, osize, &i); - - if (res != LZMA_RESULT_OK) { - printf("failed, "); - switch (res) { - case LZMA_RESULT_DATA_ERROR: - printf("data error!\n"); - break; - case LZMA_RESULT_NOT_ENOUGH_MEM: - printf("not enough memory!\n"); - break; - default: - printf("unknown error %d!\n", res); - } - halt(); - } else - printf("done!\n"); - - blast_dcache(dcache_size, dcache_lsize); - blast_icache(icache_size, icache_lsize); - - printf("launching kernel...\n\n"); - -#ifdef CONFIG_PASS_KARGS - reg_a0 = 0; - reg_a1 = 0; - reg_a2 = (unsigned long)env_vars; - reg_a3 = 0; -#endif - /* Jump to load address */ - ((kernel_entry) LOADADDR)(reg_a0, reg_a1, reg_a2, reg_a3); -} diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/head.S b/target/linux/adm5120-2.6/image/lzma-loader/src/head.S deleted file mode 100644 index ee8b3200c..000000000 --- a/target/linux/adm5120-2.6/image/lzma-loader/src/head.S +++ /dev/null @@ -1,209 +0,0 @@ -/* Copyright 2007 Gabor Juhos <juhosg@freemail.hu> */ -/* keep original values of the a0,a1,a2,a3 registers */ -/* modifed to support user defined entry point address */ -/* Copyright 2005 Oleg I. Vdovikin (oleg@cs.msu.su) */ -/* cache manipulation adapted from Broadcom code */ -/* idea taken from original bunzip2 decompressor code */ -/* Copyright 2004 Manuel Novoa III (mjn3@codepoet.org) */ -/* Licensed under the linux kernel's version of the GPL.*/ - -#include <asm/asm.h> -#include <asm/regdef.h> - -#define KSEG0 0x80000000 - -#define C0_STATUS $12 -#define C0_CAUSE $13 -#define C0_CONFIG $16 -#define C0_WATCHLO $18 -#define C0_WATCHHI $19 -#define C0_TAGLO $28 -#define C0_TAGHI $29 - -#define CONF1_DA_SHIFT 7 /* D$ associativity */ -#define CONF1_DA_MASK 0x00000380 -#define CONF1_DA_BASE 1 -#define CONF1_DL_SHIFT 10 /* D$ line size */ -#define CONF1_DL_MASK 0x00001c00 -#define CONF1_DL_BASE 2 -#define CONF1_DS_SHIFT 13 /* D$ sets/way */ -#define CONF1_DS_MASK 0x0000e000 -#define CONF1_DS_BASE 64 -#define CONF1_IA_SHIFT 16 /* I$ associativity */ -#define CONF1_IA_MASK 0x00070000 -#define CONF1_IA_BASE 1 -#define CONF1_IL_SHIFT 19 /* I$ line size */ -#define CONF1_IL_MASK 0x00380000 -#define CONF1_IL_BASE 2 -#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */ -#define CONF1_IS_MASK 0x01c00000 -#define CONF1_IS_BASE 64 - -#define Index_Invalidate_I 0x00 -#define Index_Writeback_Inv_D 0x01 - - .text - -#if (LZMA_STARTUP_ORG) - .set noreorder - - b startup - nop - - .org LZMA_STARTUP_ORG -#endif - -LEAF(startup) - .set noreorder - .set mips32 - - mtc0 zero, C0_WATCHLO # clear watch registers - mtc0 zero, C0_WATCHHI - - mtc0 zero, C0_CAUSE # clear before writing status register - - mfc0 t0, C0_STATUS # get status register - li t1, ~(0xFF01) - and t0, t1 # mask interrupts - mtc0 t0, C0_STATUS # set up status register - - move t1, ra # save return address - la t0, __reloc_label # get linked address of label - bal __reloc_label # branch and link to label to - nop # get actual address -__reloc_label: - subu t0, ra, t0 # get reloc_delta - move ra, t1 # restore return address - - beqz t0, __reloc_end # if delta is 0 we are in the right place - nop - - /* Copy our code to the right place */ - la t1, _code_start # get linked address of _code_start - la t2, _code_end # get linked address of _code_end - addu t0, t0, t1 # calculate actual address of _code_start - -__reloc_copy: - lw t3, 0(t0) - sw t3, 0(t1) - add t1, 4 - blt t1, t2, __reloc_copy - add t0, 4 - -__reloc_end: - - /* At this point we need to invalidate dcache and */ - /* icache before jumping to new code */ - -1: /* Get cache sizes */ - .set mips32 - mfc0 s0,C0_CONFIG,1 - .set mips0 - - li s1,CONF1_DL_MASK - and s1,s0 - beq s1,zero,nodc - nop - - srl s1,CONF1_DL_SHIFT - li t0,CONF1_DL_BASE - sll s1,t0,s1 /* s1 has D$ cache line size */ - - li s2,CONF1_DA_MASK - and s2,s0 - srl s2,CONF1_DA_SHIFT - addiu s2,CONF1_DA_BASE /* s2 now has D$ associativity */ - - li t0,CONF1_DS_MASK - and t0,s0 - srl t0,CONF1_DS_SHIFT - li s3,CONF1_DS_BASE - sll s3,s3,t0 /* s3 has D$ sets per way */ - - multu s2,s3 /* sets/way * associativity */ - mflo t0 /* total cache lines */ - - multu s1,t0 /* D$ linesize * lines */ - mflo s2 /* s2 is now D$ size in bytes */ - - /* Initilize the D$: */ - mtc0 zero,C0_TAGLO - mtc0 zero,C0_TAGHI - - li t0,KSEG0 /* Just an address for the first $ line */ - addu t1,t0,s2 /* + size of cache == end */ - - .set mips3 -1: cache Index_Writeback_Inv_D,0(t0) - .set mips0 - bne t0,t1,1b - addu t0,s1 - -nodc: - /* Now we get to do it all again for the I$ */ - - move s3,zero /* just in case there is no icache */ - move s4,zero - - li t0,CONF1_IL_MASK - and t0,s0 - beq t0,zero,noic - nop - - srl t0,CONF1_IL_SHIFT - li s3,CONF1_IL_BASE - sll s3,t0 /* s3 has I$ cache line size */ - - li t0,CONF1_IA_MASK - and t0,s0 - srl t0,CONF1_IA_SHIFT - addiu s4,t0,CONF1_IA_BASE /* s4 now has I$ associativity */ - - li t0,CONF1_IS_MASK - and t0,s0 - srl t0,CONF1_IS_SHIFT - li s5,CONF1_IS_BASE - sll s5,t0 /* s5 has I$ sets per way */ - - multu s4,s5 /* sets/way * associativity */ - mflo t0 /* s4 is now total cache lines */ - - multu s3,t0 /* I$ linesize * lines */ - mflo s4 /* s4 is cache size in bytes */ - - /* Initilize the I$: */ - mtc0 zero,C0_TAGLO - mtc0 zero,C0_TAGHI - - li t0,KSEG0 /* Just an address for the first $ line */ - addu t1,t0,s4 /* + size of cache == end */ - - .set mips3 -1: cache Index_Invalidate_I,0(t0) - .set mips0 - bne t0,t1,1b - addu t0,s3 - -noic: - /* Setup new "C" stack */ - la sp, _stack - - addiu sp, -32 /* reserve stack for parameters */ -#if 0 - sw a0, 0(sp) - sw a1, 4(sp) - sw a2, 8(sp) - sw a3, 12(sp) -#endif - sw s3, 16(sp) /* icache line size */ - sw s4, 20(sp) /* icache size */ - sw s1, 24(sp) /* dcache line size */ - sw s2, 28(sp) /* dcache size */ - - /* jump to the decompressor routine */ - la t0, decompress_entry - jr t0 - nop - - .set reorder -END(startup) diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/loader.lds b/target/linux/adm5120-2.6/image/lzma-loader/src/loader.lds deleted file mode 100644 index bae70fb6e..000000000 --- a/target/linux/adm5120-2.6/image/lzma-loader/src/loader.lds +++ /dev/null @@ -1,29 +0,0 @@ -OUTPUT_ARCH(mips) -SECTIONS { - .text : { - _code_start = .; - *(.text) - *(.text.*) - *(.rodata) - *(.rodata.*) - . = ALIGN(16); - *(.data.lzma) - } - - .data : { - *(.data) - *(.data.*) - } - _code_end = .; - - .bss : { - *(.bss) - *(.bss.*) - } - - . = ALIGN(16); - . = . + 8192; - _stack = .; - - workspace = .; -} diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/lzma-data.lds b/target/linux/adm5120-2.6/image/lzma-loader/src/lzma-data.lds deleted file mode 100644 index abf756ba1..000000000 --- a/target/linux/adm5120-2.6/image/lzma-loader/src/lzma-data.lds +++ /dev/null @@ -1,8 +0,0 @@ -OUTPUT_ARCH(mips) -SECTIONS { - .data.lzma : { - _lzma_data_start = .; - *(.data) - _lzma_data_end = .; - } -} diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/printf.c b/target/linux/adm5120-2.6/image/lzma-loader/src/printf.c deleted file mode 100644 index 7bb5a86e1..000000000 --- a/target/linux/adm5120-2.6/image/lzma-loader/src/printf.c +++ /dev/null @@ -1,350 +0,0 @@ -/* - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include "printf.h" - -extern void board_putc(int ch); - -/* this is the maximum width for a variable */ -#define LP_MAX_BUF 256 - -/* macros */ -#define IsDigit(x) ( ((x) >= '0') && ((x) <= '9') ) -#define Ctod(x) ( (x) - '0') - -/* forward declaration */ -static int PrintChar(char *, char, int, int); -static int PrintString(char *, char *, int, int); -static int PrintNum(char *, unsigned long, int, int, int, int, char, int); - -/* private variable */ -static const char theFatalMsg[] = "fatal error in lp_Print!"; - -/* -*- - * A low level printf() function. - */ -static void -lp_Print(void (*output)(void *, char *, int), - void * arg, - char *fmt, - va_list ap) -{ - -#define OUTPUT(arg, s, l) \ - { if (((l) < 0) || ((l) > LP_MAX_BUF)) { \ - (*output)(arg, (char*)theFatalMsg, sizeof(theFatalMsg)-1); for(;;); \ - } else { \ - (*output)(arg, s, l); \ - } \ - } - - char buf[LP_MAX_BUF]; - - char c; - char *s; - long int num; - - int longFlag; - int negFlag; - int width; - int prec; - int ladjust; - char padc; - - int length; - - for(;;) { - { - /* scan for the next '%' */ - char *fmtStart = fmt; - while ( (*fmt != '\0') && (*fmt != '%')) { - fmt ++; - } - - /* flush the string found so far */ - OUTPUT(arg, fmtStart, fmt-fmtStart); - - /* are we hitting the end? */ - if (*fmt == '\0') break; - } - - /* we found a '%' */ - fmt ++; - - /* check for long */ - if (*fmt == 'l') { - longFlag = 1; - fmt ++; - } else { - longFlag = 0; - } - - /* check for other prefixes */ - width = 0; - prec = -1; - ladjust = 0; - padc = ' '; - - if (*fmt == '-') { - ladjust = 1; - fmt ++; - } - - if (*fmt == '0') { - padc = '0'; - fmt++; - } - - if (IsDigit(*fmt)) { - while (IsDigit(*fmt)) { - width = 10 * width + Ctod(*fmt++); - } - } - - if (*fmt == '.') { - fmt ++; - if (IsDigit(*fmt)) { - prec = 0; - while (IsDigit(*fmt)) { - prec = prec*10 + Ctod(*fmt++); - } - } - } - - - /* check format flag */ - negFlag = 0; - switch (*fmt) { - case 'b': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 2, 0, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'd': - case 'D': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - if (num < 0) { - num = - num; - negFlag = 1; - } - length = PrintNum(buf, num, 10, negFlag, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'o': - case 'O': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 8, 0, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'u': - case 'U': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 10, 0, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'x': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'X': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 1); - OUTPUT(arg, buf, length); - break; - - case 'c': - c = (char)va_arg(ap, int); - length = PrintChar(buf, c, width, ladjust); - OUTPUT(arg, buf, length); - break; - - case 's': - s = (char*)va_arg(ap, char *); - length = PrintString(buf, s, width, ladjust); - OUTPUT(arg, buf, length); - break; - - case '\0': - fmt --; - break; - - default: - /* output this char as it is */ - OUTPUT(arg, fmt, 1); - } /* switch (*fmt) */ - - fmt ++; - } /* for(;;) */ - - /* special termination call */ - OUTPUT(arg, "\0", 1); -} - - -/* --------------- local help functions --------------------- */ -static int -PrintChar(char * buf, char c, int length, int ladjust) -{ - int i; - - if (length < 1) length = 1; - if (ladjust) { - *buf = c; - for (i=1; i< length; i++) buf[i] = ' '; - } else { - for (i=0; i< length-1; i++) buf[i] = ' '; - buf[length - 1] = c; - } - return length; -} - -static int -PrintString(char * buf, char* s, int length, int ladjust) -{ - int i; - int len=0; - char* s1 = s; - while (*s1++) len++; - if (length < len) length = len; - - if (ladjust) { - for (i=0; i< len; i++) buf[i] = s[i]; - for (i=len; i< length; i++) buf[i] = ' '; - } else { - for (i=0; i< length-len; i++) buf[i] = ' '; - for (i=length-len; i < length; i++) buf[i] = s[i-length+len]; - } - return length; -} - -static int -PrintNum(char * buf, unsigned long u, int base, int negFlag, - int length, int ladjust, char padc, int upcase) -{ - /* algorithm : - * 1. prints the number from left to right in reverse form. - * 2. fill the remaining spaces with padc if length is longer than - * the actual length - * TRICKY : if left adjusted, no "0" padding. - * if negtive, insert "0" padding between "0" and number. - * 3. if (!ladjust) we reverse the whole string including paddings - * 4. otherwise we only reverse the actual string representing the num. - */ - - int actualLength =0; - char *p = buf; - int i; - - do { - int tmp = u %base; - if (tmp <= 9) { - *p++ = '0' + tmp; - } else if (upcase) { - *p++ = 'A' + tmp - 10; - } else { - *p++ = 'a' + tmp - 10; - } - u /= base; - } while (u != 0); - - if (negFlag) { - *p++ = '-'; - } - - /* figure out actual length and adjust the maximum length */ - actualLength = p - buf; - if (length < actualLength) length = actualLength; - - /* add padding */ - if (ladjust) { - padc = ' '; - } - if (negFlag && !ladjust && (padc == '0')) { - for (i = actualLength-1; i< length-1; i++) buf[i] = padc; - buf[length -1] = '-'; - } else { - for (i = actualLength; i< length; i++) buf[i] = padc; - } - - - /* prepare to reverse the string */ - { - int begin = 0; - int end; - if (ladjust) { - end = actualLength - 1; - } else { - end = length -1; - } - - while (end > begin) { - char tmp = buf[begin]; - buf[begin] = buf[end]; - buf[end] = tmp; - begin ++; - end --; - } - } - - /* adjust the string pointer */ - return length; -} - -static void printf_output(void *arg, char *s, int l) -{ - int i; - - // special termination call - if ((l==1) && (s[0] == '\0')) return; - - for (i=0; i< l; i++) { - board_putc(s[i]); - if (s[i] == '\n') board_putc('\r'); - } -} - -void printf(char *fmt, ...) -{ - va_list ap; - va_start(ap, fmt); - lp_Print(printf_output, 0, fmt, ap); - va_end(ap); -} diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/printf.h b/target/linux/adm5120-2.6/image/lzma-loader/src/printf.h deleted file mode 100644 index 9b1c1df23..000000000 --- a/target/linux/adm5120-2.6/image/lzma-loader/src/printf.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef _printf_h_ -#define _printf_h_ - -#include <stdarg.h> -void printf(char *fmt, ...); - -#endif /* _printf_h_ */ |