diff options
Diffstat (limited to 'package')
12 files changed, 867 insertions, 575 deletions
diff --git a/package/mac80211/Makefile b/package/mac80211/Makefile index 8790e5542..bb0512386 100755..100644 --- a/package/mac80211/Makefile +++ b/package/mac80211/Makefile @@ -12,11 +12,11 @@ PKG_NAME:=mac80211 PKG_RELEASE:=1 ifneq ($(CONFIG_LINUX_2_6_27)$(CONFIG_LINUX_2_6_28),) - PKG_VERSION:=2009-01-19 + PKG_VERSION:=2009-01-23 PKG_SOURCE_URL:= \ http://www.orbit-lab.org/kernel/compat-wireless-2.6/2009/01 \ http://wireless.kernel.org/download/compat-wireless-2.6 - PKG_MD5SUM:=2d1cc9dacd41cdd56694c030b1865228 + PKG_MD5SUM:=f4c8df5e077432d7018112849e36f438 else PKG_VERSION:=2008-08-06 PKG_SOURCE_URL:=http://www.orbit-lab.org/kernel/compat-wireless-2.6/2008/08 diff --git a/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch b/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch index a6e76bce3..a21884688 100644 --- a/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch +++ b/package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch @@ -412,13 +412,13 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> #ifdef CONFIG_RT2X00_LIB_RFKILL --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c -@@ -325,6 +325,7 @@ static void rt2x00queue_create_tx_descri +@@ -326,6 +326,7 @@ static void rt2x00queue_create_tx_descri * Apply TX descriptor handling by components */ rt2x00crypto_create_tx_descriptor(entry, txdesc); + rt2x00ht_create_tx_descriptor(entry, txdesc, rate); rt2x00queue_create_tx_descriptor_seq(entry, txdesc); - rt2x00queue_create_tx_descriptor_plcp(entry, txdesc, rate); + rt2x00queue_create_tx_descriptor_plcp(entry, txdesc, hwrate); } --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h diff --git a/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch b/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch index 6df88d1df..ed697bb7e 100644 --- a/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch +++ b/package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch @@ -20,6 +20,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> 5 files changed, 4606 insertions(+), 0 deletions(-) create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.c create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.h + --- a/drivers/net/wireless/rt2x00/Makefile +++ b/drivers/net/wireless/rt2x00/Makefile @@ -16,5 +16,6 @@ obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00u diff --git a/package/mac80211/patches/304-rt2x00-Update-copyright-year-to-2009.patch b/package/mac80211/patches/304-rt2x00-Update-copyright-year-to-2009.patch deleted file mode 100644 index 66eb553ba..000000000 --- a/package/mac80211/patches/304-rt2x00-Update-copyright-year-to-2009.patch +++ /dev/null @@ -1,319 +0,0 @@ -From 9b9917b3acb758bb72c0e59b3f5b884ad6aec8cd Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Sat, 10 Jan 2009 14:03:40 +0100 -Subject: [PATCH] rt2x00: Update copyright year to 2009 - -Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> ---- - drivers/net/wireless/rt2x00/rt2400pci.c | 2 +- - drivers/net/wireless/rt2x00/rt2400pci.h | 2 +- - drivers/net/wireless/rt2x00/rt2500pci.c | 2 +- - drivers/net/wireless/rt2x00/rt2500pci.h | 2 +- - drivers/net/wireless/rt2x00/rt2500usb.c | 2 +- - drivers/net/wireless/rt2x00/rt2500usb.h | 2 +- - drivers/net/wireless/rt2x00/rt2x00.h | 2 +- - drivers/net/wireless/rt2x00/rt2x00config.c | 2 +- - drivers/net/wireless/rt2x00/rt2x00crypto.c | 2 +- - drivers/net/wireless/rt2x00/rt2x00debug.c | 2 +- - drivers/net/wireless/rt2x00/rt2x00debug.h | 2 +- - drivers/net/wireless/rt2x00/rt2x00dev.c | 2 +- - drivers/net/wireless/rt2x00/rt2x00dump.h | 2 +- - drivers/net/wireless/rt2x00/rt2x00firmware.c | 2 +- - drivers/net/wireless/rt2x00/rt2x00leds.c | 2 +- - drivers/net/wireless/rt2x00/rt2x00leds.h | 2 +- - drivers/net/wireless/rt2x00/rt2x00lib.h | 2 +- - drivers/net/wireless/rt2x00/rt2x00link.c | 2 +- - drivers/net/wireless/rt2x00/rt2x00mac.c | 2 +- - drivers/net/wireless/rt2x00/rt2x00pci.c | 2 +- - drivers/net/wireless/rt2x00/rt2x00pci.h | 2 +- - drivers/net/wireless/rt2x00/rt2x00queue.c | 2 +- - drivers/net/wireless/rt2x00/rt2x00queue.h | 2 +- - drivers/net/wireless/rt2x00/rt2x00reg.h | 2 +- - drivers/net/wireless/rt2x00/rt2x00rfkill.c | 2 +- - drivers/net/wireless/rt2x00/rt2x00usb.c | 2 +- - drivers/net/wireless/rt2x00/rt2x00usb.h | 2 +- - drivers/net/wireless/rt2x00/rt61pci.c | 2 +- - drivers/net/wireless/rt2x00/rt61pci.h | 2 +- - drivers/net/wireless/rt2x00/rt73usb.c | 2 +- - drivers/net/wireless/rt2x00/rt73usb.h | 2 +- - 31 files changed, 31 insertions(+), 31 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2400pci.c -+++ b/drivers/net/wireless/rt2x00/rt2400pci.c -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt2400pci.h -+++ b/drivers/net/wireless/rt2x00/rt2400pci.h -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt2500pci.c -+++ b/drivers/net/wireless/rt2x00/rt2500pci.c -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt2500pci.h -+++ b/drivers/net/wireless/rt2x00/rt2500pci.h -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt2500usb.c -+++ b/drivers/net/wireless/rt2x00/rt2500usb.c -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt2500usb.h -+++ b/drivers/net/wireless/rt2x00/rt2500usb.h -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt2x00.h -+++ b/drivers/net/wireless/rt2x00/rt2x00.h -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt2x00config.c -+++ b/drivers/net/wireless/rt2x00/rt2x00config.c -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt2x00crypto.c -+++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt2x00debug.c -+++ b/drivers/net/wireless/rt2x00/rt2x00debug.c -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt2x00debug.h -+++ b/drivers/net/wireless/rt2x00/rt2x00debug.h -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt2x00dev.c -+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt2x00dump.h -+++ b/drivers/net/wireless/rt2x00/rt2x00dump.h -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt2x00firmware.c -+++ b/drivers/net/wireless/rt2x00/rt2x00firmware.c -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt2x00leds.c -+++ b/drivers/net/wireless/rt2x00/rt2x00leds.c -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt2x00leds.h -+++ b/drivers/net/wireless/rt2x00/rt2x00leds.h -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt2x00lib.h -+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt2x00link.c -+++ b/drivers/net/wireless/rt2x00/rt2x00link.c -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt2x00mac.c -+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt2x00pci.c -+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt2x00pci.h -+++ b/drivers/net/wireless/rt2x00/rt2x00pci.h -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt2x00queue.c -+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt2x00queue.h -+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt2x00reg.h -+++ b/drivers/net/wireless/rt2x00/rt2x00reg.h -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt2x00rfkill.c -+++ b/drivers/net/wireless/rt2x00/rt2x00rfkill.c -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt2x00usb.c -+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt2x00usb.h -+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt61pci.c -+++ b/drivers/net/wireless/rt2x00/rt61pci.c -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt61pci.h -+++ b/drivers/net/wireless/rt2x00/rt61pci.h -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt73usb.c -+++ b/drivers/net/wireless/rt2x00/rt73usb.c -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify ---- a/drivers/net/wireless/rt2x00/rt73usb.h -+++ b/drivers/net/wireless/rt2x00/rt73usb.h -@@ -1,5 +1,5 @@ - /* -- Copyright (C) 2004 - 2008 rt2x00 SourceForge Project -+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify diff --git a/package/mac80211/patches/318-rt2x00-conf_tx-only-need-register-access-for-WMM.patch b/package/mac80211/patches/318-rt2x00-conf_tx-only-need-register-access-for-WMM.patch deleted file mode 100644 index c45416518..000000000 --- a/package/mac80211/patches/318-rt2x00-conf_tx-only-need-register-access-for-WMM.patch +++ /dev/null @@ -1,116 +0,0 @@ -From bbb27190d504b453625d1a663124b2b1cec0fe8b Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Sat, 17 Jan 2009 20:25:27 +0100 -Subject: [PATCH] rt2x00: conf_tx() only need register access for WMM queues - -conf_tx() in rt61pci and rt73usb only have to check once -if the queue_idx indicates a non-WMM queue and break of -the function immediately if that is the case. - -Only the WMM queues need to have the TX configuration written -to the registers. - -Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> ---- - drivers/net/wireless/rt2x00/rt61pci.c | 30 +++++++++++++++--------------- - drivers/net/wireless/rt2x00/rt73usb.c | 30 +++++++++++++++--------------- - 2 files changed, 30 insertions(+), 30 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt61pci.c -+++ b/drivers/net/wireless/rt2x00/rt61pci.c -@@ -2657,6 +2657,7 @@ static int rt61pci_conf_tx(struct ieee80 - struct rt2x00_field32 field; - int retval; - u32 reg; -+ u32 offset; - - /* - * First pass the configuration through rt2x00lib, that will -@@ -2668,24 +2669,23 @@ static int rt61pci_conf_tx(struct ieee80 - if (retval) - return retval; - -+ /* -+ * We only need to perform additional register initialization -+ * for WMM queues/ -+ */ -+ if (queue_idx >= 4) -+ return 0; -+ - queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); - - /* Update WMM TXOP register */ -- if (queue_idx < 2) { -- field.bit_offset = queue_idx * 16; -- field.bit_mask = 0xffff << field.bit_offset; -- -- rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR0, ®); -- rt2x00_set_field32(®, field, queue->txop); -- rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR0, reg); -- } else if (queue_idx < 4) { -- field.bit_offset = (queue_idx - 2) * 16; -- field.bit_mask = 0xffff << field.bit_offset; -- -- rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR1, ®); -- rt2x00_set_field32(®, field, queue->txop); -- rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR1, reg); -- } -+ offset = AC_TXOP_CSR0 + (sizeof(u32) * (!!(queue_idx & 2))); -+ field.bit_offset = (queue_idx & 1) * 16; -+ field.bit_mask = 0xffff << field.bit_offset; -+ -+ rt2x00pci_register_read(rt2x00dev, offset, ®); -+ rt2x00_set_field32(®, field, queue->txop); -+ rt2x00pci_register_write(rt2x00dev, offset, reg); - - /* Update WMM registers */ - field.bit_offset = queue_idx * 4; ---- a/drivers/net/wireless/rt2x00/rt73usb.c -+++ b/drivers/net/wireless/rt2x00/rt73usb.c -@@ -2180,6 +2180,7 @@ static int rt73usb_conf_tx(struct ieee80 - struct rt2x00_field32 field; - int retval; - u32 reg; -+ u32 offset; - - /* - * First pass the configuration through rt2x00lib, that will -@@ -2191,24 +2192,23 @@ static int rt73usb_conf_tx(struct ieee80 - if (retval) - return retval; - -+ /* -+ * We only need to perform additional register initialization -+ * for WMM queues/ -+ */ -+ if (queue_idx >= 4) -+ return 0; -+ - queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); - - /* Update WMM TXOP register */ -- if (queue_idx < 2) { -- field.bit_offset = queue_idx * 16; -- field.bit_mask = 0xffff << field.bit_offset; -- -- rt2x00usb_register_read(rt2x00dev, AC_TXOP_CSR0, ®); -- rt2x00_set_field32(®, field, queue->txop); -- rt2x00usb_register_write(rt2x00dev, AC_TXOP_CSR0, reg); -- } else if (queue_idx < 4) { -- field.bit_offset = (queue_idx - 2) * 16; -- field.bit_mask = 0xffff << field.bit_offset; -- -- rt2x00usb_register_read(rt2x00dev, AC_TXOP_CSR1, ®); -- rt2x00_set_field32(®, field, queue->txop); -- rt2x00usb_register_write(rt2x00dev, AC_TXOP_CSR1, reg); -- } -+ offset = AC_TXOP_CSR0 + (sizeof(u32) * (!!(queue_idx & 2))); -+ field.bit_offset = (queue_idx & 1) * 16; -+ field.bit_mask = 0xffff << field.bit_offset; -+ -+ rt2x00usb_register_read(rt2x00dev, offset, ®); -+ rt2x00_set_field32(®, field, queue->txop); -+ rt2x00usb_register_write(rt2x00dev, offset, reg); - - /* Update WMM registers */ - field.bit_offset = queue_idx * 4; diff --git a/package/mac80211/patches/322-rt2x00-Add-LED_MODE_ASUS-support.patch b/package/mac80211/patches/322-rt2x00-Add-LED_MODE_ASUS-support.patch deleted file mode 100644 index c19edd9d4..000000000 --- a/package/mac80211/patches/322-rt2x00-Add-LED_MODE_ASUS-support.patch +++ /dev/null @@ -1,54 +0,0 @@ -From ac8402781662b40a9f69bc33a3ec20292331e940 Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Sat, 17 Jan 2009 20:36:44 +0100 -Subject: [PATCH] rt2x00: Add LED_MODE_ASUS support - -When the led mode is asus, the activity led mode must -be registered otherwise the second LED will not be enabled. - -Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> ---- - drivers/net/wireless/rt2x00/rt2400pci.c | 4 +++- - drivers/net/wireless/rt2x00/rt2500pci.c | 4 +++- - drivers/net/wireless/rt2x00/rt2500usb.c | 4 +++- - 3 files changed, 9 insertions(+), 3 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2400pci.c -+++ b/drivers/net/wireless/rt2x00/rt2400pci.c -@@ -1395,7 +1395,9 @@ static int rt2400pci_init_eeprom(struct - value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); - - rt2400pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); -- if (value == LED_MODE_TXRX_ACTIVITY || value == LED_MODE_DEFAULT) -+ if (value == LED_MODE_TXRX_ACTIVITY || -+ value == LED_MODE_DEFAULT || -+ value == LED_MODE_ASUS) - rt2400pci_init_led(rt2x00dev, &rt2x00dev->led_qual, - LED_TYPE_ACTIVITY); - #endif /* CONFIG_RT2X00_LIB_LEDS */ ---- a/drivers/net/wireless/rt2x00/rt2500pci.c -+++ b/drivers/net/wireless/rt2x00/rt2500pci.c -@@ -1552,7 +1552,9 @@ static int rt2500pci_init_eeprom(struct - value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); - - rt2500pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); -- if (value == LED_MODE_TXRX_ACTIVITY || value == LED_MODE_DEFAULT) -+ if (value == LED_MODE_TXRX_ACTIVITY || -+ value == LED_MODE_DEFAULT || -+ value == LED_MODE_ASUS) - rt2500pci_init_led(rt2x00dev, &rt2x00dev->led_qual, - LED_TYPE_ACTIVITY); - #endif /* CONFIG_RT2X00_LIB_LEDS */ ---- a/drivers/net/wireless/rt2x00/rt2500usb.c -+++ b/drivers/net/wireless/rt2x00/rt2500usb.c -@@ -1603,7 +1603,9 @@ static int rt2500usb_init_eeprom(struct - value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); - - rt2500usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); -- if (value == LED_MODE_TXRX_ACTIVITY || value == LED_MODE_DEFAULT) -+ if (value == LED_MODE_TXRX_ACTIVITY || -+ value == LED_MODE_DEFAULT || -+ value == LED_MODE_ASUS) - rt2500usb_init_led(rt2x00dev, &rt2x00dev->led_qual, - LED_TYPE_ACTIVITY); - #endif /* CONFIG_RT2X00_LIB_LEDS */ diff --git a/package/mac80211/patches/323-rt2x00-Fix-TX-rate-short-preamble-detection.patch b/package/mac80211/patches/323-rt2x00-Fix-TX-rate-short-preamble-detection.patch deleted file mode 100644 index 712dea64a..000000000 --- a/package/mac80211/patches/323-rt2x00-Fix-TX-rate-short-preamble-detection.patch +++ /dev/null @@ -1,51 +0,0 @@ -From 4f9ea5700c714afce77e410d1c0c114c42d5a910 Mon Sep 17 00:00:00 2001 -From: Ivo van Doorn <IvDoorn@gmail.com> -Date: Sun, 18 Jan 2009 20:17:10 +0100 -Subject: [PATCH] rt2x00: Fix TX rate short preamble detection - -Mac80211 provides 2 structures to handle bitrates, namely -ieee80211_rate and ieee80211_tx_rate. To determine the short preamble -mode for an outgoing frame, the flag IEEE80211_TX_RC_USE_SHORT_PREAMBLE -must be checked on ieee80211_tx_rate and not ieee80211_rate (which rt2x00 did). - -This fixes a regression which was triggered in 2.6.29-rcX as reported by Chris Clayton. - -Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> ---- - drivers/net/wireless/rt2x00/rt2x00queue.c | 9 +++++---- - 1 files changed, 5 insertions(+), 4 deletions(-) - ---- a/drivers/net/wireless/rt2x00/rt2x00queue.c -+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c -@@ -186,10 +186,11 @@ static void rt2x00queue_create_tx_descri - - static void rt2x00queue_create_tx_descriptor_plcp(struct queue_entry *entry, - struct txentry_desc *txdesc, -- struct ieee80211_rate *rate) -+ const struct rt2x00_rate *hwrate) - { - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; -- const struct rt2x00_rate *hwrate = rt2x00_get_rate(rate->hw_value); -+ struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); -+ struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0]; - unsigned int data_length; - unsigned int duration; - unsigned int residual; -@@ -232,7 +233,7 @@ static void rt2x00queue_create_tx_descri - * When preamble is enabled we should set the - * preamble bit for the signal. - */ -- if (rate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) -+ if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) - txdesc->signal |= 0x08; - } - } -@@ -327,7 +328,7 @@ static void rt2x00queue_create_tx_descri - rt2x00crypto_create_tx_descriptor(entry, txdesc); - rt2x00ht_create_tx_descriptor(entry, txdesc, rate); - rt2x00queue_create_tx_descriptor_seq(entry, txdesc); -- rt2x00queue_create_tx_descriptor_plcp(entry, txdesc, rate); -+ rt2x00queue_create_tx_descriptor_plcp(entry, txdesc, hwrate); - } - - static void rt2x00queue_write_tx_descriptor(struct queue_entry *entry, diff --git a/package/mac80211/patches/325-rt2x00-rt2x00_rev-should-return-u32.patch b/package/mac80211/patches/325-rt2x00-rt2x00_rev-should-return-u32.patch new file mode 100644 index 000000000..0a14d9fa5 --- /dev/null +++ b/package/mac80211/patches/325-rt2x00-rt2x00_rev-should-return-u32.patch @@ -0,0 +1,25 @@ +From 3dc31edfe4bad6048f097cd4a088499500db9a2e Mon Sep 17 00:00:00 2001 +From: Ivo van Doorn <IvDoorn@gmail.com> +Date: Thu, 22 Jan 2009 21:01:56 +0100 +Subject: [PATCH] rt2x00: rt2x00_rev() should return u32 + +The "rev" field in chipset definition is an u32, +which means that rt2x00_rev() which returns that field +should be of the same type. + +Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +--- + drivers/net/wireless/rt2x00/rt2x00.h | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +--- a/drivers/net/wireless/rt2x00/rt2x00.h ++++ b/drivers/net/wireless/rt2x00/rt2x00.h +@@ -878,7 +878,7 @@ static inline char rt2x00_rf(const struc + return (chipset->rf == chip); + } + +-static inline u16 rt2x00_rev(const struct rt2x00_chip *chipset) ++static inline u32 rt2x00_rev(const struct rt2x00_chip *chipset) + { + return chipset->rev; + } diff --git a/package/mac80211/patches/326-rt2x00-Update-chipset-ID-handling-rt2800pci.patch b/package/mac80211/patches/326-rt2x00-Update-chipset-ID-handling-rt2800pci.patch new file mode 100644 index 000000000..284ba04ff --- /dev/null +++ b/package/mac80211/patches/326-rt2x00-Update-chipset-ID-handling-rt2800pci.patch @@ -0,0 +1,96 @@ +From d2216933a12c38ab23ee1170c1c143002a825046 Mon Sep 17 00:00:00 2001 +From: Ivo van Doorn <IvDoorn@gmail.com> +Date: Thu, 22 Jan 2009 21:16:08 +0100 +Subject: [PATCH] rt2x00: Update chipset ID handling (rt2800pci) + +Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +--- + drivers/net/wireless/rt2x00/rt2800pci.c | 22 ++++++++++++++++------ + drivers/net/wireless/rt2x00/rt2800pci.h | 8 +++++--- + 2 files changed, 21 insertions(+), 9 deletions(-) + +--- a/drivers/net/wireless/rt2x00/rt2800pci.c ++++ b/drivers/net/wireless/rt2x00/rt2800pci.c +@@ -984,7 +984,7 @@ static void rt2800pci_reset_tuner(struct + static void rt2800pci_link_tuner(struct rt2x00_dev *rt2x00dev, + struct link_qual *qual, const u32 count) + { +- if (rt2x00_rev(&rt2x00dev->chip) == RT2860_VERSION_C) ++ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) + return; + + /* +@@ -1272,7 +1272,11 @@ static int rt2800pci_init_registers(stru + + rt2x00pci_register_read(rt2x00dev, MAX_LEN_CFG, ®); + rt2x00_set_field32(®, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE); +- rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1); ++ if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION && ++ rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION) ++ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 2); ++ else ++ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1); + rt2x00_set_field32(®, MAX_LEN_CFG_MIN_PSDU, 0); + rt2x00_set_field32(®, MAX_LEN_CFG_MIN_MPDU, 0); + rt2x00pci_register_write(rt2x00dev, MAX_LEN_CFG, reg); +@@ -1523,12 +1527,12 @@ static int rt2800pci_init_bbp(struct rt2 + rt2800pci_bbp_write(rt2x00dev, 103, 0x00); + rt2800pci_bbp_write(rt2x00dev, 105, 0x05); + +- if (rt2x00_rev(&rt2x00dev->chip) == RT2860_VERSION_C) { ++ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { + rt2800pci_bbp_write(rt2x00dev, 69, 0x16); + rt2800pci_bbp_write(rt2x00dev, 73, 0x12); + } + +- if (rt2x00_rev(&rt2x00dev->chip) == RT2860_VERSION_D) ++ if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION) + rt2800pci_bbp_write(rt2x00dev, 84, 0x19); + + for (i = 0; i < EEPROM_BBP_SIZE; i++) { +@@ -1637,6 +1641,11 @@ static int rt2800pci_enable_radio(struct + /* + * Enable RX. + */ ++ rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, ®); ++ rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); ++ rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0); ++ rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg); ++ + rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1); +@@ -2253,13 +2262,14 @@ static int rt2800pci_init_eeprom(struct + PCI_CONFIG_HEADER_DEVICE, &device); + value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); + rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®); +- reg = rt2x00_get_field32(reg, MAC_CSR0_ASIC_REV); + rt2x00_set_chip(rt2x00dev, device, value, reg); + + if (!rt2x00_rf(&rt2x00dev->chip, RF2820) && + !rt2x00_rf(&rt2x00dev->chip, RF2850) && + !rt2x00_rf(&rt2x00dev->chip, RF2720) && +- !rt2x00_rf(&rt2x00dev->chip, RF2750)) { ++ !rt2x00_rf(&rt2x00dev->chip, RF2750) && ++ !rt2x00_rf(&rt2x00dev->chip, RF3020) && ++ !rt2x00_rf(&rt2x00dev->chip, RF2020)) { + ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); + return -ENODEV; + } +--- a/drivers/net/wireless/rt2x00/rt2800pci.h ++++ b/drivers/net/wireless/rt2x00/rt2800pci.h +@@ -47,9 +47,11 @@ + /* + * RT2860 version + */ +-#define RT2860_VERSION_C 0x0100 +-#define RT2860_VERSION_D 0x0101 +-#define RT2860_VERSION_E 0x0200 ++#define RT2860C_VERSION 0x28600100 ++#define RT2860D_VERSION 0x28600101 ++#define RT2880E_VERSION 0x28720200 ++#define RT2883_VERSION 0x28830300 ++#define RT3070_VERSION 0x30700200 + + /* + * Signal information. diff --git a/package/mac80211/patches/327-rt2x00-Add-support-for-rt3070-rt2800usb.patch b/package/mac80211/patches/327-rt2x00-Add-support-for-rt3070-rt2800usb.patch new file mode 100644 index 000000000..e92bcd263 --- /dev/null +++ b/package/mac80211/patches/327-rt2x00-Add-support-for-rt3070-rt2800usb.patch @@ -0,0 +1,683 @@ +From 84706fce3026650c49c6290e0e6525b45795027c Mon Sep 17 00:00:00 2001 +From: Ivo van Doorn <IvDoorn@gmail.com> +Date: Thu, 22 Jan 2009 21:16:46 +0100 +Subject: [PATCH] rt2x00: Add support for rt3070 (rt2800usb) + +Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +--- + drivers/net/wireless/rt2x00/rt2800usb.c | 384 +++++++++++++++++++++++++++---- + drivers/net/wireless/rt2x00/rt2800usb.h | 57 +++++- + drivers/net/wireless/rt2x00/rt2x00.h | 6 + + 3 files changed, 404 insertions(+), 43 deletions(-) + +--- a/drivers/net/wireless/rt2x00/rt2800usb.c ++++ b/drivers/net/wireless/rt2x00/rt2800usb.c +@@ -59,6 +59,8 @@ MODULE_PARM_DESC(nohwcrypt, "Disable har + */ + #define WAIT_FOR_BBP(__dev, __reg) \ + rt2x00usb_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg)) ++#define WAIT_FOR_RFCSR(__dev, __reg) \ ++ rt2x00usb_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg)) + #define WAIT_FOR_RF(__dev, __reg) \ + rt2x00usb_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg)) + #define WAIT_FOR_MCU(__dev, __reg) \ +@@ -120,6 +122,61 @@ static void rt2800usb_bbp_read(struct rt + mutex_unlock(&rt2x00dev->csr_mutex); + } + ++static void rt2800usb_rfcsr_write(struct rt2x00_dev *rt2x00dev, ++ const unsigned int word, const u8 value) ++{ ++ u32 reg; ++ ++ mutex_lock(&rt2x00dev->csr_mutex); ++ ++ /* ++ * Wait until the RFCSR becomes available, afterwards we ++ * can safely write the new data into the register. ++ */ ++ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { ++ reg = 0; ++ rt2x00_set_field32(®, RF_CSR_CFG_DATA, value); ++ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); ++ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1); ++ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); ++ ++ rt2x00usb_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); ++ } ++ ++ mutex_unlock(&rt2x00dev->csr_mutex); ++} ++ ++static void rt2800usb_rfcsr_read(struct rt2x00_dev *rt2x00dev, ++ const unsigned int word, u8 *value) ++{ ++ u32 reg; ++ ++ mutex_lock(&rt2x00dev->csr_mutex); ++ ++ /* ++ * Wait until the RFCSR becomes available, afterwards we ++ * can safely write the read request into the register. ++ * After the data has been written, we wait until hardware ++ * returns the correct value, if at any time the register ++ * doesn't become available in time, reg will be 0xffffffff ++ * which means we return 0xff to the caller. ++ */ ++ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { ++ reg = 0; ++ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); ++ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0); ++ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); ++ ++ rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg); ++ ++ WAIT_FOR_RFCSR(rt2x00dev, ®); ++ } ++ ++ *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA); ++ ++ mutex_unlock(&rt2x00dev->csr_mutex); ++} ++ + static void rt2800usb_rf_write(struct rt2x00_dev *rt2x00dev, + const unsigned int word, const u32 value) + { +@@ -635,42 +692,24 @@ static void rt2800usb_config_lna_gain(st + rt2x00dev->lna_gain = lna_gain; + } + +-static void rt2800usb_config_channel(struct rt2x00_dev *rt2x00dev, +- struct rf_channel *rf, +- struct channel_info *info) ++static void rt2800usb_config_channel_rt2x(struct rt2x00_dev *rt2x00dev, ++ struct rf_channel *rf, ++ struct channel_info *info) + { +- u32 reg; +- unsigned int tx_pin; + u16 eeprom; + +- tx_pin = 0; +- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1); +- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1); +- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1); +- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1); +- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1); +- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1); +- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1); +- + rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); + + /* + * Determine antenna settings from EEPROM + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); +- if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1) { ++ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1) + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1); +- /* Turn off unused PA or LNA when only 1T or 1R */ +- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 0); +- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 0); +- } + + if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 1) { + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1); + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); +- /* Turn off unused PA or LNA when only 1T or 1R */ +- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 0); +- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 0); + } else if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 2) + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); + +@@ -698,15 +737,11 @@ static void rt2800usb_config_channel(str + + rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A, + TXPOWER_A_TO_DEV(info->tx_power2)); +- +- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, 1); + } else { + rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G, + TXPOWER_G_TO_DEV(info->tx_power1)); + rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G, + TXPOWER_G_TO_DEV(info->tx_power2)); +- +- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1); + } + + rt2x00_set_field32(&rf->rf4, RF4_BW40, +@@ -730,6 +765,81 @@ static void rt2800usb_config_channel(str + rt2800usb_rf_write(rt2x00dev, 2, rf->rf2); + rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); + rt2800usb_rf_write(rt2x00dev, 4, rf->rf4); ++} ++ ++static void rt2800usb_config_channel_rt3x(struct rt2x00_dev *rt2x00dev, ++ struct rf_channel *rf, ++ struct channel_info *info) ++{ ++ u8 rfcsr; ++ ++ rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf1); ++ rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf3); ++ ++ rt2800usb_rfcsr_read(rt2x00dev, 6, &rfcsr); ++ rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2); ++ rt2800usb_rfcsr_write(rt2x00dev, 6, rfcsr); ++ ++ rt2800usb_rfcsr_read(rt2x00dev, 12, &rfcsr); ++ rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, ++ TXPOWER_G_TO_DEV(info->tx_power1)); ++ rt2800usb_rfcsr_write(rt2x00dev, 12, rfcsr); ++ ++ rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr); ++ rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset); ++ rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr); ++ ++ if (test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) ++ rt2800usb_rfcsr_write(rt2x00dev, 24, rt2x00dev->calibration_bw40); ++ else ++ rt2800usb_rfcsr_write(rt2x00dev, 24, rt2x00dev->calibration_bw20); ++ ++ rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr); ++ rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1); ++ rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr); ++} ++ ++static void rt2800usb_config_channel(struct rt2x00_dev *rt2x00dev, ++ struct rf_channel *rf, ++ struct channel_info *info) ++{ ++ u32 reg; ++ unsigned int tx_pin; ++ u16 eeprom; ++ ++ if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION) ++ rt2800usb_config_channel_rt2x(rt2x00dev, rf, info); ++ else ++ rt2800usb_config_channel_rt3x(rt2x00dev, rf, info); ++ ++ tx_pin = 0; ++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1); ++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1); ++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1); ++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1); ++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1); ++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1); ++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1); ++ ++ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); ++ ++ /* Turn off unused PA or LNA when only 1T or 1R */ ++ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1) { ++ ++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 0); ++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 0); ++ } ++ ++ /* Turn off unused PA or LNA when only 1T or 1R */ ++ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 1) { ++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 0); ++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 0); ++ } ++ ++ if (rf->channel > 14) ++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, 1); ++ else ++ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1); + + /* + * Change BBP settings +@@ -935,8 +1045,12 @@ static void rt2800usb_link_stats(struct + + static u8 rt2800usb_get_default_vgc(struct rt2x00_dev *rt2x00dev) + { +- if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) +- return 0x2e + rt2x00dev->lna_gain; ++ if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) { ++ if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) ++ return 0x1c + (2 * rt2x00dev->lna_gain); ++ else ++ return 0x2e + rt2x00dev->lna_gain; ++ } + + if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) + return 0x32 + (rt2x00dev->lna_gain * 5) / 3; +@@ -964,7 +1078,7 @@ static void rt2800usb_reset_tuner(struct + static void rt2800usb_link_tuner(struct rt2x00_dev *rt2x00dev, + struct link_qual *qual, const u32 count) + { +- if (rt2x00_rev(&rt2x00dev->chip) == RT2870_VERSION_C) ++ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) + return; + + /* +@@ -1145,8 +1259,14 @@ static int rt2800usb_init_registers(stru + rt2x00_set_field32(®, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0); + rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); + +- rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00040a06); +- rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); ++ if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) { ++ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400); ++ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000); ++ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); ++ } else { ++ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00040a06); ++ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); ++ } + + rt2x00usb_register_read(rt2x00dev, TX_LINK_CFG, ®); + rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32); +@@ -1166,7 +1286,11 @@ static int rt2800usb_init_registers(stru + + rt2x00usb_register_read(rt2x00dev, MAX_LEN_CFG, ®); + rt2x00_set_field32(®, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE); +- rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1); ++ if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION && ++ rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION) ++ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 2); ++ else ++ rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1); + rt2x00_set_field32(®, MAX_LEN_CFG_MIN_PSDU, 0); + rt2x00_set_field32(®, MAX_LEN_CFG_MIN_MPDU, 0); + rt2x00usb_register_write(rt2x00dev, MAX_LEN_CFG, reg); +@@ -1427,13 +1551,16 @@ static int rt2800usb_init_bbp(struct rt2 + rt2800usb_bbp_write(rt2x00dev, 103, 0x00); + rt2800usb_bbp_write(rt2x00dev, 105, 0x05); + +- if (rt2x00_rev(&rt2x00dev->chip) == RT2870_VERSION_C) { ++ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { + rt2800usb_bbp_write(rt2x00dev, 69, 0x16); + rt2800usb_bbp_write(rt2x00dev, 73, 0x12); + } + +- if (rt2x00_rev(&rt2x00dev->chip) != RT2870_VERSION_D) +- rt2800usb_bbp_write(rt2x00dev, 84, 0x19); ++ if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) { ++ rt2800usb_bbp_write(rt2x00dev, 70, 0x0a); ++ rt2800usb_bbp_write(rt2x00dev, 84, 0x99); ++ rt2800usb_bbp_write(rt2x00dev, 105, 0x05); ++ } + + for (i = 0; i < EEPROM_BBP_SIZE; i++) { + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); +@@ -1448,6 +1575,134 @@ static int rt2800usb_init_bbp(struct rt2 + return 0; + } + ++static u8 rt2800usb_init_rx_filter(struct rt2x00_dev *rt2x00dev, ++ bool bw40, u8 rfcsr24, u8 filter_target) ++{ ++ unsigned int i; ++ u8 bbp; ++ u8 rfcsr; ++ u8 passband; ++ u8 stopband; ++ u8 overtuned = 0; ++ ++ rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24); ++ ++ if (bw40) { ++ rt2800usb_bbp_read(rt2x00dev, 4, &bbp); ++ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0x10); ++ rt2800usb_bbp_write(rt2x00dev, 4, bbp); ++ } ++ ++ rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr); ++ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1); ++ rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr); ++ ++ /* ++ * Set power & frequency of passband test tone ++ */ ++ rt2800usb_bbp_write(rt2x00dev, 24, 0); ++ ++ for (i = 0; i < 100; i++) { ++ rt2800usb_bbp_write(rt2x00dev, 25, 0x90); ++ msleep(1); ++ ++ rt2800usb_bbp_read(rt2x00dev, 55, &passband); ++ if (passband) ++ break; ++ } ++ ++ /* ++ * Set power & frequency of stopband test tone ++ */ ++ rt2800usb_bbp_write(rt2x00dev, 24, 0x06); ++ ++ for (i = 0; i < 100; i++) { ++ rt2800usb_bbp_write(rt2x00dev, 25, 0x90); ++ msleep(1); ++ ++ rt2800usb_bbp_read(rt2x00dev, 55, &stopband); ++ ++ if ((passband - stopband) <= filter_target) { ++ rfcsr24++; ++ overtuned += ((passband - stopband) == filter_target); ++ } else ++ break; ++ ++ rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24); ++ } ++ ++ rfcsr24 -= !!overtuned; ++ ++ rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24); ++ return rfcsr24; ++} ++ ++static int rt2800usb_init_rfcsr(struct rt2x00_dev *rt2x00dev) ++{ ++ u8 rfcsr; ++ u8 bbp; ++ ++ if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION) ++ return 0; ++ ++ /* ++ * Init RF calibration. ++ */ ++ rt2800usb_rfcsr_read(rt2x00dev, 30, &rfcsr); ++ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1); ++ rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr); ++ msleep(1); ++ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0); ++ rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr); ++ ++ rt2800usb_rfcsr_write(rt2x00dev, 4, 0x40); ++ rt2800usb_rfcsr_write(rt2x00dev, 5, 0x03); ++ rt2800usb_rfcsr_write(rt2x00dev, 6, 0x02); ++ rt2800usb_rfcsr_write(rt2x00dev, 7, 0x70); ++ rt2800usb_rfcsr_write(rt2x00dev, 9, 0x0f); ++ rt2800usb_rfcsr_write(rt2x00dev, 10, 0x71); ++ rt2800usb_rfcsr_write(rt2x00dev, 11, 0x21); ++ rt2800usb_rfcsr_write(rt2x00dev, 12, 0x7b); ++ rt2800usb_rfcsr_write(rt2x00dev, 14, 0x90); ++ rt2800usb_rfcsr_write(rt2x00dev, 15, 0x58); ++ rt2800usb_rfcsr_write(rt2x00dev, 16, 0xb3); ++ rt2800usb_rfcsr_write(rt2x00dev, 17, 0x92); ++ rt2800usb_rfcsr_write(rt2x00dev, 18, 0x2c); ++ rt2800usb_rfcsr_write(rt2x00dev, 19, 0x02); ++ rt2800usb_rfcsr_write(rt2x00dev, 20, 0xba); ++ rt2800usb_rfcsr_write(rt2x00dev, 21, 0xdb); ++ rt2800usb_rfcsr_write(rt2x00dev, 24, 0x16); ++ rt2800usb_rfcsr_write(rt2x00dev, 25, 0x01); ++ rt2800usb_rfcsr_write(rt2x00dev, 27, 0x03); ++ rt2800usb_rfcsr_write(rt2x00dev, 29, 0x1f); ++ ++ /* ++ * Set RX Filter calibration for 20MHz and 40MHz ++ */ ++ rt2x00dev->calibration_bw20 = ++ rt2800usb_init_rx_filter(rt2x00dev, false, 0x07, 0x16); ++ rt2x00dev->calibration_bw40 = ++ rt2800usb_init_rx_filter(rt2x00dev, true, 0x27, 0x19); ++ ++ /* ++ * Set back to initial state ++ */ ++ rt2800usb_bbp_write(rt2x00dev, 24, 0); ++ ++ rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr); ++ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0); ++ rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr); ++ ++ /* ++ * set BBP back to BW20 ++ */ ++ rt2800usb_bbp_read(rt2x00dev, 4, &bbp); ++ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0); ++ rt2800usb_bbp_write(rt2x00dev, 4, bbp); ++ ++ return 0; ++} ++ + /* + * Device state switch handlers. + */ +@@ -1491,7 +1746,8 @@ static int rt2800usb_enable_radio(struct + */ + if (unlikely(rt2800usb_wait_wpdma_ready(rt2x00dev) || + rt2800usb_init_registers(rt2x00dev) || +- rt2800usb_init_bbp(rt2x00dev))) ++ rt2800usb_init_bbp(rt2x00dev) || ++ rt2800usb_init_rfcsr(rt2x00dev))) + return -EIO; + + rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®); +@@ -1982,7 +2238,6 @@ static int rt2800usb_validate_eeprom(str + static int rt2800usb_init_eeprom(struct rt2x00_dev *rt2x00dev) + { + u32 reg; +- u16 rev; + u16 value; + u16 eeprom; + +@@ -1996,8 +2251,7 @@ static int rt2800usb_init_eeprom(struct + */ + value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); + rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®); +- rev = rt2x00_get_field32(reg, MAC_CSR0_ASIC_REV); +- rt2x00_set_chip(rt2x00dev, RT2870, value, rev); ++ rt2x00_set_chip(rt2x00dev, RT2870, value, reg); + + /* + * The check for rt2860 is not a typo, some rt2870 hardware +@@ -2012,7 +2266,9 @@ static int rt2800usb_init_eeprom(struct + if (!rt2x00_rf(&rt2x00dev->chip, RF2820) && + !rt2x00_rf(&rt2x00dev->chip, RF2850) && + !rt2x00_rf(&rt2x00dev->chip, RF2720) && +- !rt2x00_rf(&rt2x00dev->chip, RF2750)) { ++ !rt2x00_rf(&rt2x00dev->chip, RF2750) && ++ !rt2x00_rf(&rt2x00dev->chip, RF3020) && ++ !rt2x00_rf(&rt2x00dev->chip, RF2020)) { + ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); + return -ENODEV; + } +@@ -2127,6 +2383,27 @@ static const struct rf_channel rf_vals[] + { 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 }, + }; + ++/* ++ * RF value list for rt3070 ++ * Supports: 2.4 GHz ++ */ ++static const struct rf_channel rf_vals_3070[] = { ++ {1, 241, 2, 2 }, ++ {2, 241, 2, 7 }, ++ {3, 242, 2, 2 }, ++ {4, 242, 2, 7 }, ++ {5, 243, 2, 2 }, ++ {6, 243, 2, 7 }, ++ {7, 244, 2, 2 }, ++ {8, 244, 2, 7 }, ++ {9, 245, 2, 2 }, ++ {10, 245, 2, 7 }, ++ {11, 246, 2, 2 }, ++ {12, 246, 2, 7 }, ++ {13, 247, 2, 2 }, ++ {14, 248, 2, 4 }, ++}; ++ + static int rt2800usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) + { + struct hw_mode_spec *spec = &rt2x00dev->spec; +@@ -2184,6 +2461,10 @@ static int rt2800usb_probe_hw_mode(struc + spec->supported_bands |= SUPPORT_BAND_5GHZ; + spec->num_channels = ARRAY_SIZE(rf_vals); + spec->channels = rf_vals; ++ } else if (rt2x00_rf(&rt2x00dev->chip, RF3020) || ++ rt2x00_rf(&rt2x00dev->chip, RF2020)) { ++ spec->num_channels = ARRAY_SIZE(rf_vals_3070); ++ spec->channels = rf_vals_3070; + } + + /* +@@ -2473,6 +2754,12 @@ static const struct rt2x00_ops rt2800usb + * rt2800usb module information. + */ + static struct usb_device_id rt2800usb_device_table[] = { ++ /* Abocom */ ++ { USB_DEVICE(0x07b8, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ { USB_DEVICE(0x07b8, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ { USB_DEVICE(0x07b8, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ { USB_DEVICE(0x07b8, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ { USB_DEVICE(0x1482, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Amit */ + { USB_DEVICE(0x15c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* ASUS */ +@@ -2483,9 +2770,12 @@ static struct usb_device_id rt2800usb_de + { USB_DEVICE(0x13d3, 0x3247), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Belkin */ + { USB_DEVICE(0x050d, 0x8053), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ { USB_DEVICE(0x050d, 0x805c), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Conceptronic */ + { USB_DEVICE(0x14b2, 0x3c06), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x14b2, 0x3c07), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ { USB_DEVICE(0x14b2, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ { USB_DEVICE(0x14b2, 0x3c12), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x14b2, 0x3c23), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x14b2, 0x3c25), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x14b2, 0x3c27), USB_DEVICE_DATA(&rt2800usb_ops) }, +@@ -2494,9 +2784,12 @@ static struct usb_device_id rt2800usb_de + { USB_DEVICE(0x07aa, 0x002f), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x07aa, 0x003c), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x07aa, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ { USB_DEVICE(0x18c5, 0x0012), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* D-Link */ + { USB_DEVICE(0x07d1, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x07d1, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ /* Edimax */ ++ { USB_DEVICE(0x7392, 0x7711), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* EnGenius */ + { USB_DEVICE(0X1740, 0x9701), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x1740, 0x9702), USB_DEVICE_DATA(&rt2800usb_ops) }, +@@ -2507,13 +2800,21 @@ static struct usb_device_id rt2800usb_de + { USB_DEVICE(0x0e66, 0x0003), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Linksys */ + { USB_DEVICE(0x1737, 0x0071), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ /* Logitec */ ++ { USB_DEVICE(0x0789, 0x0162), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ { USB_DEVICE(0x0789, 0x0163), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ { USB_DEVICE(0x0789, 0x0164), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Philips */ + { USB_DEVICE(0x0471, 0x200f), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Planex */ + { USB_DEVICE(0x2019, 0xed06), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ { USB_DEVICE(0x2019, 0xab25), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Ralink */ + { USB_DEVICE(0x148f, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x148f, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ { USB_DEVICE(0x148f, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ /* Samsung */ ++ { USB_DEVICE(0x04e8, 0x2018), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Siemens */ + { USB_DEVICE(0x129b, 0x1828), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Sitecom */ +@@ -2533,6 +2834,9 @@ static struct usb_device_id rt2800usb_de + /* ZCOM */ + { USB_DEVICE(0x0cde, 0x0022), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0cde, 0x0025), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ /* Zinwell */ ++ { USB_DEVICE(0x5a57, 0x0280), USB_DEVICE_DATA(&rt2800usb_ops) }, ++ { USB_DEVICE(0x5a57, 0x0282), USB_DEVICE_DATA(&rt2800usb_ops) }, + /* Zyxel */ + { USB_DEVICE(0x0586, 0x3416), USB_DEVICE_DATA(&rt2800usb_ops) }, + { 0, } +--- a/drivers/net/wireless/rt2x00/rt2800usb.h ++++ b/drivers/net/wireless/rt2x00/rt2800usb.h +@@ -47,9 +47,11 @@ + /* + * RT2870 version + */ +-#define RT2870_VERSION_C 0x0100 +-#define RT2870_VERSION_D 0x0101 +-#define RT2870_VERSION_E 0x0200 ++#define RT2860C_VERSION 0x28600100 ++#define RT2860D_VERSION 0x28600101 ++#define RT2880E_VERSION 0x28720200 ++#define RT2883_VERSION 0x28830300 ++#define RT3070_VERSION 0x30700200 + + /* + * Signal information. +@@ -383,6 +385,15 @@ + #define PBF_DBG 0x043c + + /* ++ * RF registers ++ */ ++#define RF_CSR_CFG 0x0500 ++#define RF_CSR_CFG_DATA FIELD32(0x000000ff) ++#define RF_CSR_CFG_REGNUM FIELD32(0x00001f00) ++#define RF_CSR_CFG_WRITE FIELD32(0x00010000) ++#define RF_CSR_CFG_BUSY FIELD32(0x00020000) ++ ++/* + * MAC Control/Status Registers(CSR). + * Some values are set in TU, whereas 1 TU == 1024 us. + */ +@@ -1482,6 +1493,46 @@ struct hw_key_entry { + #define BBP3_RX_ANTENNA FIELD8(0x18) + + /* ++ * BBP 4: Bandwidth ++ */ ++#define BBP4_BANDWIDTH FIELD8(0x18) ++ ++/* ++ * RFCSR registers ++ * The wordsize of the RFCSR is 8 bits. ++ */ ++ ++/* ++ * RFCSR 6: ++ */ ++#define RFCSR6_R FIELD8(0x03) ++ ++/* ++ * RFCSR 7: ++ */ ++#define RFCSR7_RF_TUNING FIELD8(0x01) ++ ++/* ++ * RFCSR 12: ++ */ ++#define RFCSR12_TX_POWER FIELD8(0x1f) ++ ++/* ++ * RFCSR 22: ++ */ ++#define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01) ++ ++/* ++ * RFCSR 23: ++ */ ++#define RFCSR23_FREQ_OFFSET FIELD8(0x7f) ++ ++/* ++ * RFCSR 30: ++ */ ++#define RFCSR30_RF_CALIBRATION FIELD8(0x80) ++ ++/* + * RF registers + */ + +--- a/drivers/net/wireless/rt2x00/rt2x00.h ++++ b/drivers/net/wireless/rt2x00/rt2x00.h +@@ -780,6 +780,12 @@ struct rt2x00_dev { + u8 freq_offset; + + /* ++ * Calibration information (for rt2800usb). ++ */ ++ u8 calibration_bw20; ++ u8 calibration_bw40; ++ ++ /* + * Low level statistics which will have + * to be kept up to date while device is running. + */ diff --git a/package/mac80211/patches/329-rt2x00-Add-support-for-2-firmware-file-lengths-rt2.patch b/package/mac80211/patches/329-rt2x00-Add-support-for-2-firmware-file-lengths-rt2.patch new file mode 100644 index 000000000..b05843db8 --- /dev/null +++ b/package/mac80211/patches/329-rt2x00-Add-support-for-2-firmware-file-lengths-rt2.patch @@ -0,0 +1,58 @@ +From cac151e6e6aa50ecb5d965aa5e2840d0e69f8efa Mon Sep 17 00:00:00 2001 +From: Ivo van Doorn <IvDoorn@gmail.com> +Date: Thu, 22 Jan 2009 22:02:32 +0100 +Subject: [PATCH] rt2x00: Add support for 2 firmware file lengths (rt2800usb) + +Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> +--- + drivers/net/wireless/rt2x00/rt2800usb.c | 32 +++++++++++++++++++++++++++++- + 1 files changed, 30 insertions(+), 2 deletions(-) + +--- a/drivers/net/wireless/rt2x00/rt2800usb.c ++++ b/drivers/net/wireless/rt2x00/rt2800usb.c +@@ -1128,6 +1128,34 @@ static int rt2800usb_load_firmware(struc + unsigned int i; + int status; + u32 reg; ++ u32 offset; ++ u32 length; ++ u16 chipset = (rt2x00_rev(&rt2x00dev->chip) >> 16) & 0xffff; ++ ++ /* ++ * Firmware files: ++ * There are 2 variations of the rt2870 firmware. ++ * a) size: 4kb ++ * b) size: 8kb ++ * Note that (b) contains 2 seperate firmware blobs of 4k ++ * within the file. The first blob is the same firmware as (a), ++ * but the second blob is for the additional chipsets. ++ */ ++ if (len < 4096) { ++ ERROR(rt2x00dev, "Unsupported firmware file (len=%zu)\n", len); ++ return -ENOENT; ++ } ++ ++ if ((chipset == 0x2860) || (chipset == 0x2872) || (chipset == 0x3070)) { ++ offset = 0; ++ length = 4096; ++ } else if (len == 8192) { ++ offset = 4096; ++ length = 4096; ++ } else { ++ ERROR(rt2x00dev, "Unsupported firmware file (len=%zu)\n", len); ++ return -ENOENT; ++ } + + /* + * Wait for stable hardware. +@@ -1150,8 +1178,8 @@ static int rt2800usb_load_firmware(struc + rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, + FIRMWARE_IMAGE_BASE, +- data, len, +- REGISTER_TIMEOUT32(len)); ++ data + offset, length, ++ REGISTER_TIMEOUT32(length)); + + rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0); + rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0); diff --git a/package/mac80211/patches/400-ath9k-restore-ath9k_platform.h.patch b/package/mac80211/patches/400-ath9k-restore-ath9k_platform.h.patch deleted file mode 100644 index 6c7d29d04..000000000 --- a/package/mac80211/patches/400-ath9k-restore-ath9k_platform.h.patch +++ /dev/null @@ -1,31 +0,0 @@ ---- /dev/null -+++ b/include/linux/ath9k_platform.h -@@ -0,0 +1,28 @@ -+/* -+ * Copyright (c) 2008 Atheros Communications Inc. -+ * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org> -+ * Copyright (c) 2009 Imre Kaloz <kaloz@openwrt.org> -+ * -+ * Permission to use, copy, modify, and/or distribute this software for any -+ * purpose with or without fee is hereby granted, provided that the above -+ * copyright notice and this permission notice appear in all copies. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+#ifndef _LINUX_ATH9K_PLATFORM_H -+#define _LINUX_ATH9K_PLATFORM_H -+ -+#define ATH9K_PLAT_EEP_MAX_WORDS 2048 -+ -+struct ath9k_platform_data { -+ u16 eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS]; -+}; -+ -+#endif /* _LINUX_ATH9K_PLATFORM_H */ |