diff options
Diffstat (limited to 'package/uboot-lantiq')
23 files changed, 4001 insertions, 8 deletions
diff --git a/package/uboot-lantiq/Config.in b/package/uboot-lantiq/Config.in index 578b08864..d434667af 100644 --- a/package/uboot-lantiq/Config.in +++ b/package/uboot-lantiq/Config.in @@ -27,11 +27,6 @@ config UBOOT_RAMBOOT_DDR_CONFIG It will be used to create a RAM boot image Select for Danube evalution board easy50712_DDR166M.conf . Select for AR9 evalution board easy50812.conf . - - -config UBOOT_A800 - bool "add ARV452 Switch bringup hack" - help - Say Y, if you have a arv452 board (wav-281, A800, ..) + Select for arcadyan PSC RAM board arcadyan.conf . endmenu diff --git a/package/uboot-lantiq/Makefile b/package/uboot-lantiq/Makefile index 089802e42..9b037f4d8 100644 --- a/package/uboot-lantiq/Makefile +++ b/package/uboot-lantiq/Makefile @@ -28,10 +28,9 @@ endif define Package/uboot-lantiq SECTION:=boot CATEGORY:=Boot Loaders - DEPENDS:=@TARGET_ifxmips + DEPENDS:=@TARGET_lantiq TITLE:=U-Boot for Lantiq reference boards URL:=http://www.denx.de/wiki/U-Boot - MENU:=1 endef define Build/Prepare diff --git a/package/uboot-lantiq/arcadyan_psc166.conf b/package/uboot-lantiq/arcadyan_psc166.conf new file mode 100644 index 000000000..8cae0c77e --- /dev/null +++ b/package/uboot-lantiq/arcadyan_psc166.conf @@ -0,0 +1,141 @@ + 0xbf800060 0x7 + 0xbf800010 0x0 + 0xbf800020 0x0 + 0xbf800200 0x02 + 0xbf800210 0x0 + +;REG32(MC_DC0) = 0x00001B1B; + 0xbf801000 0x1b1b +;REG32(MC_DC1) = 0x00000000; + 0xbf801010 0x0 +;REG32(MC_DC2) = 0x00000000; + 0xbf801020 0x0 +;REG32(MC_DC3) = 0x00000000; + 0xbf801030 0x0 +;REG32(MC_DC4) = 0x00000000; + 0xbf801040 0x0 +;REG32(MC_DC5) = 0x00000200; + 0xbf801050 0x200 +;REG32(MC_DC6) = 0x00000306; +; 0xbf801060 0x0306 + 0xbf801060 0x0605 +;REG32(MC_DC7) = 0x00000303; +; 0xbf801070 0x302 +; 0xbf801070 0x0203 + 0xbf801070 0x0303 +;REG32(MC_DC8) = 0x00000102; + 0xbf801080 0x102 +;REG32(MC_DC9) = 0x0000070A; + 0xbf801090 0x70a +; 0xbf801090 0x608 +;REG32(MC_DC10) = 0x00000203; + 0xbf8010a0 0x203 +;REG32(MC_DC11) = 0x00000C02; + 0xbf8010b0 0xc02 +; 0xbf8010b0 0x0a02 +;REG32(MC_DC12) = 0x000001C8; + 0xbf8010c0 0x1c8 +;REG32(MC_DC13) = 0x00000001; + 0xbf8010d0 0x1 +;REG32(MC_DC14) = 0x00000000; + 0xbf8010e0 0x0 +;REG32(MC_DC15) = 0x00000F5F; +; 0xbf8010f0 0xf5f +; 0xbf8010f0 0xf3c + 0xbf8010f0 0x130 +;REG32(MC_DC16) = 0x0000C800; + 0xbf801100 0xc800 +;REG32(MC_DC17) = 0x0000000D; +; 0xbf801110 0xd + 0xbf801110 0xd +;REG32(MC_DC18) = 0x00000300; +; 0xbf801120 0x300 + 0xbf801120 0x301 +;REG32(MC_DC19) = 0x00000300; +; 0xbf801130 0x300 + 0xbf801130 0x200 +;REG32(MC_DC20) = 0x00000A04; +; 0xbf801140 0xa04 + 0xbf801140 0xa03 +;REG32(MC_DC21) = 0x00001c00; +; 0xbf801150 0xd00 +; 0xbf801150 0x1f00 + 0xbf801150 0x1b00 +;REG32(MC_DC22) = 0x00001E1E; +; 0xbf801160 0xd0d +; 0xbf801160 0x1f1f + 0xbf801160 0x1b1b +;REG32(MC_DC23) = 0x00000000; + 0xbf801170 0x0 +;//Disable ECC +;REG32(MC_DC24) = 0x0000007F; +; 0xbf801180 0x7f +; 0xbf801180 0x062 +; 0xbf801180 0x37f + 0xbf801180 0x59 +;REG32(MC_DC25) = 0x00000000; + 0xbf801190 0x0 +;REG32(MC_DC26) = 0x00000000; + 0xbf8011a0 0x0 +;REG32(MC_DC27) = 0x00000000; + 0xbf8011b0 0x0 +;REG32(MC_DC28) = 0x00000A24; +; 0xbf8011c0 0xa24 + 0xbf8011c0 0x510 +;REG32(MC_DC29) = 0x00002D89; +; 0xbf8011d0 0x2d89 +; 0xbf8011d0 0x2d92 + 0xbf8011d0 0x4e20 +;REG32(MC_DC30) = 0x00000022; +; 0xbf8011e0 0x8300 + 0xbf8011e0 0x8235 +;REG32(MC_DC31) = 0x00000000; + 0xbf8011f0 0x0 +;REG32(MC_DC32) = 0x00000000; + 0xbf801200 0x0 +;REG32(MC_DC33) = 0x00000000; + 0xbf801210 0x0 +;REG32(MC_DC34) = 0x00000000; + 0xbf801220 0x0 +;REG32(MC_DC35) = 0x00000000; + 0xbf801230 0x0 +;REG32(MC_DC36) = 0x00000000; + 0xbf801240 0x0 +;REG32(MC_DC37) = 0x00000000; + 0xbf801250 0x0 +;REG32(MC_DC38) = 0x00000000; + 0xbf801260 0x0 +;REG32(MC_DC39) = 0x00000000; + 0xbf801270 0x0 +;REG32(MC_DC40) = 0x00000000; + 0xbf801280 0x0 +;REG32(MC_DC41) = 0x00000000; + 0xbf801290 0x0 +;REG32(MC_DC42) = 0x00000000; + 0xbf8012a0 0x0 +;REG32(MC_DC43) = 0x00000000; + 0xbf8012b0 0x0 +;REG32(MC_DC44) = 0x00000000; + 0xbf8012c0 0x0 +;REG32(MC_DC45) = 0x00000600; + 0xbf8012d0 0x500 +;REG32(MC_DC46) = 0x00000000; + 0xbf8012e0 0x0 + + 0xbf800060 0x05 + 0xbf801030 0x100 + + + + + + + + + + + + + + + diff --git a/package/uboot-lantiq/files/board/arcadyan/arv4518/Makefile b/package/uboot-lantiq/files/board/arcadyan/arv4518/Makefile new file mode 100644 index 000000000..61f383b8d --- /dev/null +++ b/package/uboot-lantiq/files/board/arcadyan/arv4518/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2003-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +#COBJS := $(BOARD).o +COBJS-y += arv4518.o + +SOBJS = lowlevel_init.o pmuenable.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/package/uboot-lantiq/files/board/arcadyan/arv4518/arv4518.c b/package/uboot-lantiq/files/board/arcadyan/arv4518/arv4518.c new file mode 100644 index 000000000..c015dd701 --- /dev/null +++ b/package/uboot-lantiq/files/board/arcadyan/arv4518/arv4518.c @@ -0,0 +1,334 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2010 + * Thomas Langer, Ralph Hempel + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <netdev.h> +#include <miiphy.h> +#include <asm/addrspace.h> +#include <asm/danube.h> +#include <asm/reboot.h> +#include <asm/io.h> +#if defined(CONFIG_CMD_HTTPD) +#include <httpd.h> +#endif +#if defined(CONFIG_PCI) +#include <pci.h> +#endif + +extern ulong ifx_get_ddr_hz(void); +extern ulong ifx_get_cpuclk(void); + +/* IDs and registers of known external switches */ +#define ID_RTL8306 0x5988 +#define CONFIG_EXTRA_SWITCH 1 +void _machine_restart(void) +{ + *DANUBE_RCU_RST_REQ |=1<<30; +} + +#ifdef CONFIG_SYS_RAMBOOT +phys_size_t initdram(int board_type) +{ + return get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM); +} +#elif defined(CONFIG_USE_DDR_RAM) +phys_size_t initdram(int board_type) +{ + return (CONFIG_SYS_MAX_RAM); +} +#else + +static ulong max_sdram_size(void) /* per Chip Select */ +{ + /* The only supported SDRAM data width is 16bit. + */ +#define CFG_DW 4 + + /* The only supported number of SDRAM banks is 4. + */ +#define CFG_NB 4 + + ulong cfgpb0 = *DANUBE_SDRAM_MC_CFGPB0; + int cols = cfgpb0 & 0xF; + int rows = (cfgpb0 & 0xF0) >> 4; + ulong size = (1 << (rows + cols)) * CFG_DW * CFG_NB; + + return size; +} + +/* + * Check memory range for valid RAM. A simple memory test determines + * the actually available RAM size between addresses `base' and + * `base + maxsize'. + */ + +static long int dram_size(long int *base, long int maxsize) +{ + volatile long int *addr; + ulong cnt, val; + ulong save[32]; /* to make test non-destructive */ + unsigned char i = 0; + + for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) { + addr = base + cnt; /* pointer arith! */ + + save[i++] = *addr; + *addr = ~cnt; + } + + /* write 0 to base address */ + addr = base; + save[i] = *addr; + *addr = 0; + + /* check at base address */ + if ((val = *addr) != 0) { + *addr = save[i]; + return (0); + } + + for (cnt = 1; cnt < maxsize / sizeof (long); cnt <<= 1) { + addr = base + cnt; /* pointer arith! */ + + val = *addr; + *addr = save[--i]; + + if (val != (~cnt)) { + return (cnt * sizeof (long)); + } + } + return (maxsize); +} + +phys_size_t initdram(int board_type) +{ + int rows, cols, best_val = *DANUBE_SDRAM_MC_CFGPB0; + ulong size, max_size = 0; + ulong our_address; + + /* load t9 into our_address */ + asm volatile ("move %0, $25" : "=r" (our_address) :); + + /* Can't probe for RAM size unless we are running from Flash. + * find out whether running from DRAM or Flash. + */ + if (CPHYSADDR(our_address) < CPHYSADDR(PHYS_FLASH_1)) + { + return max_sdram_size(); + } + + for (cols = 0x8; cols <= 0xC; cols++) + { + for (rows = 0xB; rows <= 0xD; rows++) + { + *DANUBE_SDRAM_MC_CFGPB0 = (0x14 << 8) | + (rows << 4) | cols; + size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, + max_sdram_size()); + + if (size > max_size) + { + best_val = *DANUBE_SDRAM_MC_CFGPB0; + max_size = size; + } + } + } + + *DANUBE_SDRAM_MC_CFGPB0 = best_val; + return max_size; +} +#endif + +int checkboard (void) +{ + unsigned long chipid = *DANUBE_MPS_CHIPID; + int part_num; + + puts ("Board: "); + + part_num = DANUBE_MPS_CHIPID_PARTNUM_GET(chipid); + switch (part_num) + { + case 0x129: + case 0x12D: + case 0x12b: + puts("Danube/Twinpass/Vinax-VE "); + break; + default: + printf ("unknown, chip part number 0x%03X ", part_num); + break; + } + printf ("V1.%ld, ", DANUBE_MPS_CHIPID_VERSION_GET(chipid)); + + printf("DDR Speed %ld MHz, ", ifx_get_ddr_hz()/1000000); + printf("CPU Speed %ld MHz\n", ifx_get_cpuclk()/1000000); + + return 0; +} + +#ifdef CONFIG_SKIP_LOWLEVEL_INIT +int board_early_init_f(void) +{ +#ifdef CONFIG_EBU_ADDSEL0 + (*DANUBE_EBU_ADDSEL0) = CONFIG_EBU_ADDSEL0; +#endif +#ifdef CONFIG_EBU_ADDSEL1 + (*DANUBE_EBU_ADDSEL1) = CONFIG_EBU_ADDSEL1; +#endif +#ifdef CONFIG_EBU_ADDSEL2 + (*DANUBE_EBU_ADDSEL2) = CONFIG_EBU_ADDSEL2; +#endif +#ifdef CONFIG_EBU_ADDSEL3 + (*DANUBE_EBU_ADDSEL3) = CONFIG_EBU_ADDSEL3; +#endif +#ifdef CONFIG_EBU_BUSCON0 + (*DANUBE_EBU_BUSCON0) = CONFIG_EBU_BUSCON0; +#endif +#ifdef CONFIG_EBU_BUSCON1 + (*DANUBE_EBU_BUSCON1) = CONFIG_EBU_BUSCON1; +#endif +#ifdef CONFIG_EBU_BUSCON2 + (*DANUBE_EBU_BUSCON2) = CONFIG_EBU_BUSCON2; +#endif +#ifdef CONFIG_EBU_BUSCON3 + (*DANUBE_EBU_BUSCON3) = CONFIG_EBU_BUSCON3; +#endif + + return 0; +} +#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ + + +#ifdef CONFIG_EXTRA_SWITCH +static int external_switch_init(void) +{ + unsigned short chipid; + static char * const name = "lq_cpe_eth"; + + /* earlier no valid response is available, at least on Twinpass & Tantos @ 111MHz, M4530 platform */ + udelay(100000); + + puts("\nsearching for rtl8306 switch ... "); + if (miiphy_read(name, 4, 30, &chipid) == 0) { + puts("s1\n"); + if (chipid == ID_RTL8306) { + puts("found"); + /* set led mode */ + miiphy_write(name, 0, 19, 0xffff); + /* magic */ + miiphy_write(name, 4, 22, 0x877f); + puts("\n"); + return 0; + } + puts("failed\n"); + } + puts("\nno known switch found ... \n"); + + return 0; +} +#endif /* CONFIG_EXTRA_SWITCH */ + +int board_eth_init(bd_t *bis) +{ +#if defined(CONFIG_IFX_ETOP) + uchar enetaddr[6]; + if (!eth_getenv_enetaddr("ethaddr", enetaddr)) + eth_setenv_enetaddr("ethaddr", (uchar *)0xb03f0016); + + *DANUBE_PMU_PWDCR &= 0xFFFFEFDF; + *DANUBE_PMU_PWDCR &=~(1<<DANUBE_PMU_DMA_SHIFT);/*enable DMA from PMU*/ + + if (lq_eth_initialize(bis)) + return -1; + + *DANUBE_RCU_RST_REQ |=1; + udelay(200000); + *DANUBE_RCU_RST_REQ &=(unsigned long)~1; + udelay(1000); + +#ifdef CONFIG_EXTRA_SWITCH + if (external_switch_init()<0) + return -1; +#endif /* CONFIG_EXTRA_SWITCH */ +#endif /* CONFIG_IFX_ETOP */ + + return 0; +} + +#if defined(CONFIG_CMD_HTTPD) +int do_http_upgrade(const unsigned char *data, const ulong size) +{ + char buf[128]; + + if(getenv ("ram_addr") == NULL) + return -1; + if(getenv ("kernel_addr") == NULL) + return -1; + /* check the image */ + if(run_command("imi ${ram_addr}", 0) < 0) { + return -1; + } + /* write the image to the flash */ + puts("http ugrade ...\n"); + sprintf(buf, "era ${kernel_addr} +0x%lx; cp.b ${ram_addr} ${kernel_addr} 0x%lx", size, size); + return run_command(buf, 0); +} + +int do_http_progress(const int state) +{ + /* toggle LED's here */ + switch(state) { + case HTTP_PROGRESS_START: + puts("http start\n"); + break; + case HTTP_PROGRESS_TIMEOUT: + puts("."); + break; + case HTTP_PROGRESS_UPLOAD_READY: + puts("http upload ready\n"); + break; + case HTTP_PROGRESS_UGRADE_READY: + puts("http ugrade ready\n"); + break; + case HTTP_PROGRESS_UGRADE_FAILED: + puts("http ugrade failed\n"); + break; + } + return 0; +} + +unsigned long do_http_tmp_address(void) +{ + char *s = getenv ("ram_addr"); + if (s) { + ulong tmp = simple_strtoul (s, NULL, 16); + return tmp; + } + return 0 /*0x80a00000*/; +} + +#endif diff --git a/package/uboot-lantiq/files/board/arcadyan/arv4518/config.mk b/package/uboot-lantiq/files/board/arcadyan/arv4518/config.mk new file mode 100644 index 000000000..c0e5d8244 --- /dev/null +++ b/package/uboot-lantiq/files/board/arcadyan/arv4518/config.mk @@ -0,0 +1,60 @@ +# +# (C) Copyright 2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# Danube board with MIPS 24Kc CPU core +# +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp + +ifdef CONFIG_LZMA_BOOTSTRAP + +ifdef BUILD_BOOTSTRAP + +$(info BUILD_BOOTSTRAP ) +#TEXT_BASE = 0xB0000000 +TEXT_BASE = 0x80010000 + +else # BUILD_BOOTSTRAP + +ifndef TEXT_BASE +$(info redefine TEXT_BASE = 0x80040000 ) +TEXT_BASE = 0x80040000 +endif + +endif # BUILD_BOOTSTRAP + +else + +ifdef BUILD_BOOTSTRAP +$(error BUILD_BOOTSTRAP but not enabled in config) +endif + +ifndef TEXT_BASE +## Standard: boot from ebu +$(info redefine TEXT_BASE = 0xB0000000 ) +TEXT_BASE = 0xB0000000 +## For testing: boot from RAM +# TEXT_BASE = 0x80100000 +endif + +endif # CONFIG_LZMA_BOOTSTRAP diff --git a/package/uboot-lantiq/files/board/arcadyan/arv4518/ddr_settings.h b/package/uboot-lantiq/files/board/arcadyan/arv4518/ddr_settings.h new file mode 100644 index 000000000..4df6f1170 --- /dev/null +++ b/package/uboot-lantiq/files/board/arcadyan/arv4518/ddr_settings.h @@ -0,0 +1,50 @@ +/* Settings for Denali DDR SDRAM controller */ +/* Optimise for DDR PSC A3S12D40ETP for arv4518pw Danube Board DDR 166 Mhz - by Ngp 14th Sept. 2010 */ + +#define MC_DC0_VALUE 0x1B1B +#define MC_DC1_VALUE 0x0 +#define MC_DC2_VALUE 0x0 +#define MC_DC3_VALUE 0x0 +#define MC_DC4_VALUE 0x0 +#define MC_DC5_VALUE 0x200 +#define MC_DC6_VALUE 0x605 +#define MC_DC7_VALUE 0x303 +#define MC_DC8_VALUE 0x102 +#define MC_DC9_VALUE 0x70a +#define MC_DC10_VALUE 0x203 +#define MC_DC11_VALUE 0xc02 +#define MC_DC12_VALUE 0x1C8 +#define MC_DC13_VALUE 0x1 +#define MC_DC14_VALUE 0x0 +#define MC_DC15_VALUE 0x130 /* WDQS tuning for clk_wr*/ +#define MC_DC16_VALUE 0xC800 +#define MC_DC17_VALUE 0xd +#define MC_DC18_VALUE 0x301 +#define MC_DC19_VALUE 0x200 +#define MC_DC20_VALUE 0xA03 /* A04 for reference board, A03 for Eval board */ +#define MC_DC21_VALUE 0x1b00 +#define MC_DC22_VALUE 0x1b1b +#define MC_DC23_VALUE 0x0 +#define MC_DC24_VALUE 0x59 /* WDQS Tuning for DQS */ +#define MC_DC25_VALUE 0x0 +#define MC_DC26_VALUE 0x0 +#define MC_DC27_VALUE 0x0 +#define MC_DC28_VALUE 0x510 +#define MC_DC29_VALUE 0x4e20 +#define MC_DC30_VALUE 0x8235 +#define MC_DC31_VALUE 0x0 +#define MC_DC32_VALUE 0x0 +#define MC_DC33_VALUE 0x0 +#define MC_DC34_VALUE 0x0 +#define MC_DC35_VALUE 0x0 +#define MC_DC36_VALUE 0x0 +#define MC_DC37_VALUE 0x0 +#define MC_DC38_VALUE 0x0 +#define MC_DC39_VALUE 0x0 +#define MC_DC40_VALUE 0x0 +#define MC_DC41_VALUE 0x0 +#define MC_DC42_VALUE 0x0 +#define MC_DC43_VALUE 0x0 +#define MC_DC44_VALUE 0x0 +#define MC_DC45_VALUE 0x500 +#define MC_DC46_VALUE 0x0 diff --git a/package/uboot-lantiq/files/board/arcadyan/arv4518/lowlevel_init.S b/package/uboot-lantiq/files/board/arcadyan/arv4518/lowlevel_init.S new file mode 100644 index 000000000..c4570d015 --- /dev/null +++ b/package/uboot-lantiq/files/board/arcadyan/arv4518/lowlevel_init.S @@ -0,0 +1,622 @@ +/* + * Memory sub-system initialization code for Danube board. + * Andre Messerschmidt + * Copyright (c) 2005 Infineon Technologies AG + * + * Based on Inca-IP code + * Copyright (c) 2003 Wolfgang Denk <wd@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +/* History: + peng liu May 25, 2006, for PLL setting after reset, 05252006 + */ +#include <config.h> +#include <version.h> +#include <asm/regdef.h> + +#if 0 + +#if defined(CONFIG_USE_DDR_RAM) + +#if defined(CONFIG_USE_DDR_RAM_CFG_111M) +#include "ddr_settings_r111.h" +#define DDR111 +#elif defined(CONFIG_USE_DDR_RAM_CFG_166M) +#include "ddr_settings_r166.h" +#define DDR166 +#elif defined(CONFIG_USE_DDR_RAM_CFG_e111M) +#include "ddr_settings_e111.h" +#define DDR111 +#elif defined(CONFIG_USE_DDR_RAM_CFG_e166M) +#include "ddr_settings_e166.h" +#define DDR166 +#elif defined(CONFIG_USE_DDR_RAM_CFG_promos400) +#include "ddr_settings_PROMOSDDR400.h" +#define DDR166 +#elif defined(CONFIG_USE_DDR_RAM_CFG_samsung166) +#include "ddr_settings_Samsung_166.h" +#define DDR166 +#elif defined(CONFIG_USE_DDR_RAM_CFG_psc166) +#include "ddr_settings_psc_166.h" +#define DDR166 +#else +#warning "missing definition for ddr_settings.h, use default!" +#include "ddr_settings.h" +#endif +#endif /* CONFIG_USE_DDR_RAM */ + +#else + +#include "ddr_settings.h" +#define DDR166 + +#endif + +#if defined(CONFIG_USE_DDR_RAM) && !defined(MC_DC0_VALUE) +#error "missing include of ddr_settings.h" +#endif + +#define EBU_MODUL_BASE 0xBE105300 +#define EBU_CLC(value) 0x0000(value) +#define EBU_CON(value) 0x0010(value) +#define EBU_ADDSEL0(value) 0x0020(value) +#define EBU_ADDSEL1(value) 0x0024(value) +#define EBU_ADDSEL2(value) 0x0028(value) +#define EBU_ADDSEL3(value) 0x002C(value) +#define EBU_BUSCON0(value) 0x0060(value) +#define EBU_BUSCON1(value) 0x0064(value) +#define EBU_BUSCON2(value) 0x0068(value) +#define EBU_BUSCON3(value) 0x006C(value) + +#define MC_MODUL_BASE 0xBF800000 +#define MC_ERRCAUSE(value) 0x0010(value) +#define MC_ERRADDR(value) 0x0020(value) +#define MC_CON(value) 0x0060(value) + +#define MC_SRAM_ENABLE 0x00000004 +#define MC_SDRAM_ENABLE 0x00000002 +#define MC_DDRRAM_ENABLE 0x00000001 + +#define MC_SDR_MODUL_BASE 0xBF800200 +#define MC_IOGP(value) 0x0000(value) +#define MC_CTRLENA(value) 0x0010(value) +#define MC_MRSCODE(value) 0x0020(value) +#define MC_CFGDW(value) 0x0030(value) +#define MC_CFGPB0(value) 0x0040(value) +#define MC_LATENCY(value) 0x0080(value) +#define MC_TREFRESH(value) 0x0090(value) +#define MC_SELFRFSH(value) 0x00A0(value) + +#define MC_DDR_MODUL_BASE 0xBF801000 +#define MC_DC00(value) 0x0000(value) +#define MC_DC01(value) 0x0010(value) +#define MC_DC02(value) 0x0020(value) +#define MC_DC03(value) 0x0030(value) +#define MC_DC04(value) 0x0040(value) +#define MC_DC05(value) 0x0050(value) +#define MC_DC06(value) 0x0060(value) +#define MC_DC07(value) 0x0070(value) +#define MC_DC08(value) 0x0080(value) +#define MC_DC09(value) 0x0090(value) +#define MC_DC10(value) 0x00A0(value) +#define MC_DC11(value) 0x00B0(value) +#define MC_DC12(value) 0x00C0(value) +#define MC_DC13(value) 0x00D0(value) +#define MC_DC14(value) 0x00E0(value) +#define MC_DC15(value) 0x00F0(value) +#define MC_DC16(value) 0x0100(value) +#define MC_DC17(value) 0x0110(value) +#define MC_DC18(value) 0x0120(value) +#define MC_DC19(value) 0x0130(value) +#define MC_DC20(value) 0x0140(value) +#define MC_DC21(value) 0x0150(value) +#define MC_DC22(value) 0x0160(value) +#define MC_DC23(value) 0x0170(value) +#define MC_DC24(value) 0x0180(value) +#define MC_DC25(value) 0x0190(value) +#define MC_DC26(value) 0x01A0(value) +#define MC_DC27(value) 0x01B0(value) +#define MC_DC28(value) 0x01C0(value) +#define MC_DC29(value) 0x01D0(value) +#define MC_DC30(value) 0x01E0(value) +#define MC_DC31(value) 0x01F0(value) +#define MC_DC32(value) 0x0200(value) +#define MC_DC33(value) 0x0210(value) +#define MC_DC34(value) 0x0220(value) +#define MC_DC35(value) 0x0230(value) +#define MC_DC36(value) 0x0240(value) +#define MC_DC37(value) 0x0250(value) +#define MC_DC38(value) 0x0260(value) +#define MC_DC39(value) 0x0270(value) +#define MC_DC40(value) 0x0280(value) +#define MC_DC41(value) 0x0290(value) +#define MC_DC42(value) 0x02A0(value) +#define MC_DC43(value) 0x02B0(value) +#define MC_DC44(value) 0x02C0(value) +#define MC_DC45(value) 0x02D0(value) +#define MC_DC46(value) 0x02E0(value) + +#define RCU_OFFSET 0xBF203000 +#define RCU_RST_REQ (RCU_OFFSET + 0x0010) +#define RCU_STS (RCU_OFFSET + 0x0014) + +#define CGU_OFFSET 0xBF103000 +#define PLL0_CFG (CGU_OFFSET + 0x0004) +#define PLL1_CFG (CGU_OFFSET + 0x0008) +#define PLL2_CFG (CGU_OFFSET + 0x000C) +#define CGU_SYS (CGU_OFFSET + 0x0010) +#define CGU_UPDATE (CGU_OFFSET + 0x0014) +#define IF_CLK (CGU_OFFSET + 0x0018) +#define CGU_SMD (CGU_OFFSET + 0x0020) +#define CGU_CT1SR (CGU_OFFSET + 0x0028) +#define CGU_CT2SR (CGU_OFFSET + 0x002C) +#define CGU_PCMCR (CGU_OFFSET + 0x0030) +#define PCI_CR_PCI (CGU_OFFSET + 0x0034) +#define CGU_OSC_CTRL (CGU_OFFSET + 0x001C) +#define CGU_MIPS_PWR_DWN (CGU_OFFSET + 0x0038) +#define CLK_MEASURE (CGU_OFFSET + 0x003C) + +//05252006 +#define pll0_35MHz_CONFIG 0x9D861059 +#define pll1_35MHz_CONFIG 0x1A260CD9 +#define pll2_35MHz_CONFIG 0x8000f1e5 +#define pll0_36MHz_CONFIG 0x1000125D +#define pll1_36MHz_CONFIG 0x1B1E0C99 +#define pll2_36MHz_CONFIG 0x8002f2a1 +//05252006 + +//06063001-joelin disable the PCI CFRAME mask -start +/*CFRAME is an I/O signal, in the chip, the output CFRAME is selected via GPIO altsel pins, so if you select MII1 RXD1, the CFRAME will not come out. +But the CFRAME input still take the signal from the pad and not disabled when altsel choose other function. So when MII1_RXD1 is low from other device, the EBU interface will be disabled. + +The chip function in such a way that disable the CFRAME mask mean EBU not longer check CFRAME to be the device using the bus. +The side effect is the entire PCI block will see CFRAME low all the time meaning PCI cannot use the bus at all so no more PCI function. +*/ +#define PCI_CR_PR_OFFSET 0xBE105400 +#define PCI_CR_PCI_MOD_REG (PCI_CR_PR_OFFSET + 0x0030) +#define PCI_CONFIG_SPACE 0xB7000000 +#define CS_CFM (PCI_CONFIG_SPACE + 0x6C) +//06063001-joelin disable the PCI CFRAME mask -end + .set noreorder + + +/* + * void ebu_init(void) + */ + .globl ebu_init + .ent ebu_init +ebu_init: + +#if defined(CONFIG_EBU_ADDSEL0) || defined(CONFIG_EBU_ADDSEL1) || \ + defined(CONFIG_EBU_ADDSEL2) || defined(CONFIG_EBU_ADDSEL3) || \ + defined(CONFIG_EBU_BUSCON0) || defined(CONFIG_EBU_BUSCON1) || \ + defined(CONFIG_EBU_BUSCON2) || defined(CONFIG_EBU_BUSCON3) + + li t1, EBU_MODUL_BASE +#if defined(CONFIG_EBU_ADDSEL0) + li t2, CONFIG_EBU_ADDSEL0 + sw t2, EBU_ADDSEL0(t1) +#endif +#if defined(CONFIG_EBU_ADDSEL1) + li t2, CONFIG_EBU_ADDSEL1 + sw t2, EBU_ADDSEL1(t1) +#endif +#if defined(CONFIG_EBU_ADDSEL2) + li t2, CONFIG_EBU_ADDSEL2 + sw t2, EBU_ADDSEL2(t1) +#endif +#if defined(CONFIG_EBU_ADDSEL3) + li t2, CONFIG_EBU_ADDSEL3 + sw t2, EBU_ADDSEL3(t1) +#endif + +#if defined(CONFIG_EBU_BUSCON0) + li t2, CONFIG_EBU_BUSCON0 + sw t2, EBU_BUSCON0(t1) +#endif +#if defined(CONFIG_EBU_BUSCON1) + li t2, CONFIG_EBU_BUSCON1 + sw t2, EBU_BUSCON1(t1) +#endif +#if defined(CONFIG_EBU_BUSCON2) + li t2, CONFIG_EBU_BUSCON2 + sw t2, EBU_BUSCON2(t1) +#endif +#if defined(CONFIG_EBU_BUSCON3) + li t2, CONFIG_EBU_BUSCON3 + sw t2, EBU_BUSCON3(t1) +#endif + +#endif + + j ra + nop + + .end ebu_init + + +/* + * void cgu_init(long) + * + * a0 has the clock value + */ + .globl cgu_init + .ent cgu_init +cgu_init: + li t2, CGU_SYS + lw t2,0(t2) + beq t2,a0,freq_up2date + nop + + li t2, RCU_STS + lw t2, 0(t2) + and t2,0x00020000 + beq t2,0x00020000,boot_36MHZ + nop +//05252006 + li t1, PLL0_CFG + li t2, pll0_35MHz_CONFIG + sw t2,0(t1) + li t1, PLL1_CFG + li t2, pll1_35MHz_CONFIG + sw t2,0(t1) + li t1, PLL2_CFG + li t2, pll2_35MHz_CONFIG + sw t2,0(t1) + li t1, CGU_SYS + sw a0,0(t1) + li t1, RCU_RST_REQ + li t2, 0x40000008 + sw t2,0(t1) + b wait_reset + nop +boot_36MHZ: + li t1, PLL0_CFG + li t2, pll0_36MHz_CONFIG + sw t2,0(t1) + li t1, PLL1_CFG + li t2, pll1_36MHz_CONFIG + sw t2,0(t1) + li t1, PLL2_CFG + li t2, pll2_36MHz_CONFIG + sw t2,0(t1) + li t1, CGU_SYS + sw a0,0(t1) + li t1, RCU_RST_REQ + li t2, 0x40000008 + sw t2,0(t1) +//05252006 + +wait_reset: + b wait_reset + nop +freq_up2date: + j ra + nop + + .end cgu_init + +#ifndef CONFIG_USE_DDR_RAM +/* + * void sdram_init(long) + * + * a0 has the clock value + */ + .globl sdram_init + .ent sdram_init +sdram_init: + + /* SDRAM Initialization + */ + li t1, MC_MODUL_BASE + + /* Clear Error log registers */ + sw zero, MC_ERRCAUSE(t1) + sw zero, MC_ERRADDR(t1) + + /* Enable SDRAM module in memory controller */ + li t3, MC_SDRAM_ENABLE + lw t2, MC_CON(t1) + or t3, t2, t3 + sw t3, MC_CON(t1) + + li t1, MC_SDR_MODUL_BASE + + /* disable the controller */ + li t2, 0 + sw t2, MC_CTRLENA(t1) + + li t2, 0x822 + sw t2, MC_IOGP(t1) + + li t2, 0x2 + sw t2, MC_CFGDW(t1) + + /* Set CAS Latency */ + li t2, 0x00000020 + sw t2, MC_MRSCODE(t1) + + /* Set CS0 to SDRAM parameters */ + li t2, 0x000014d8 + sw t2, MC_CFGPB0(t1) + + /* Set SDRAM latency parameters */ + li t2, 0x00036325; /* BC PC100 */ + sw t2, MC_LATENCY(t1) + + /* Set SDRAM refresh rate */ + li t2, 0x00000C30 + sw t2, MC_TREFRESH(t1) + + /* Clear Power-down registers */ + sw zero, MC_SELFRFSH(t1) + + /* Finally enable the controller */ + li t2, 1 + sw t2, MC_CTRLENA(t1) + + j ra + nop + + .end sdram_init + +#endif /* !CONFIG_USE_DDR_RAM */ + +#ifdef CONFIG_USE_DDR_RAM +/* + * void ddrram_init(long) + * + * a0 has the clock value + */ + .globl ddrram_init + .ent ddrram_init +ddrram_init: + + /* DDR-DRAM Initialization + */ + li t1, MC_MODUL_BASE + + /* Clear Error log registers */ + sw zero, MC_ERRCAUSE(t1) + sw zero, MC_ERRADDR(t1) + + /* Enable DDR module in memory controller */ + li t3, MC_DDRRAM_ENABLE + lw t2, MC_CON(t1) + or t3, t2, t3 + sw t3, MC_CON(t1) + + li t1, MC_DDR_MODUL_BASE + + /* Write configuration to DDR controller registers */ + li t2, MC_DC0_VALUE + sw t2, MC_DC00(t1) + + li t2, MC_DC1_VALUE + sw t2, MC_DC01(t1) + + li t2, MC_DC2_VALUE + sw t2, MC_DC02(t1) + + li t2, MC_DC3_VALUE + sw t2, MC_DC03(t1) + + li t2, MC_DC4_VALUE + sw t2, MC_DC04(t1) + + li t2, MC_DC5_VALUE + sw t2, MC_DC05(t1) + + li t2, MC_DC6_VALUE + sw t2, MC_DC06(t1) + + li t2, MC_DC7_VALUE + sw t2, MC_DC07(t1) + + li t2, MC_DC8_VALUE + sw t2, MC_DC08(t1) + + li t2, MC_DC9_VALUE + sw t2, MC_DC09(t1) + + li t2, MC_DC10_VALUE + sw t2, MC_DC10(t1) + + li t2, MC_DC11_VALUE + sw t2, MC_DC11(t1) + + li t2, MC_DC12_VALUE + sw t2, MC_DC12(t1) + + li t2, MC_DC13_VALUE + sw t2, MC_DC13(t1) + + li t2, MC_DC14_VALUE + sw t2, MC_DC14(t1) + + li t2, MC_DC15_VALUE + sw t2, MC_DC15(t1) + + li t2, MC_DC16_VALUE + sw t2, MC_DC16(t1) + + li t2, MC_DC17_VALUE + sw t2, MC_DC17(t1) + + li t2, MC_DC18_VALUE + sw t2, MC_DC18(t1) + + li t2, MC_DC19_VALUE + sw t2, MC_DC19(t1) + + li t2, MC_DC20_VALUE + sw t2, MC_DC20(t1) + + li t2, MC_DC21_VALUE + sw t2, MC_DC21(t1) + + li t2, MC_DC22_VALUE + sw t2, MC_DC22(t1) + + li t2, MC_DC23_VALUE + sw t2, MC_DC23(t1) + + li t2, MC_DC24_VALUE + sw t2, MC_DC24(t1) + + li t2, MC_DC25_VALUE + sw t2, MC_DC25(t1) + + li t2, MC_DC26_VALUE + sw t2, MC_DC26(t1) + + li t2, MC_DC27_VALUE + sw t2, MC_DC27(t1) + + li t2, MC_DC28_VALUE + sw t2, MC_DC28(t1) + + li t2, MC_DC29_VALUE + sw t2, MC_DC29(t1) + + li t2, MC_DC30_VALUE + sw t2, MC_DC30(t1) + + li t2, MC_DC31_VALUE + sw t2, MC_DC31(t1) + + li t2, MC_DC32_VALUE + sw t2, MC_DC32(t1) + + li t2, MC_DC33_VALUE + sw t2, MC_DC33(t1) + + li t2, MC_DC34_VALUE + sw t2, MC_DC34(t1) + + li t2, MC_DC35_VALUE + sw t2, MC_DC35(t1) + + li t2, MC_DC36_VALUE + sw t2, MC_DC36(t1) + + li t2, MC_DC37_VALUE + sw t2, MC_DC37(t1) + + li t2, MC_DC38_VALUE + sw t2, MC_DC38(t1) + + li t2, MC_DC39_VALUE + sw t2, MC_DC39(t1) + + li t2, MC_DC40_VALUE + sw t2, MC_DC40(t1) + + li t2, MC_DC41_VALUE + sw t2, MC_DC41(t1) + + li t2, MC_DC42_VALUE + sw t2, MC_DC42(t1) + + li t2, MC_DC43_VALUE + sw t2, MC_DC43(t1) + + li t2, MC_DC44_VALUE + sw t2, MC_DC44(t1) + + li t2, MC_DC45_VALUE + sw t2, MC_DC45(t1) + + li t2, MC_DC46_VALUE + sw t2, MC_DC46(t1) + + li t2, 0x00000100 + sw t2, MC_DC03(t1) + + j ra + nop + + .end ddrram_init +#endif /* CONFIG_USE_DDR_RAM */ + + .globl lowlevel_init + .ent lowlevel_init +lowlevel_init: + /* EBU, CGU and SDRAM/DDR-RAM Initialization. + */ + move t0, ra + /* We rely on the fact that non of the following ..._init() functions + * modify t0 + */ +#if defined(CONFIG_SYS_EBU_BOOT) +#if defined(DDR166) + /* 0xe8 means CPU0/CPU1 333M, DDR 167M, FPI 83M, PPE 240M */ + li a0,0xe8 +#elif defined(DDR133) + /* 0xe9 means CPU0/CPU1 333M, DDR 133M, FPI 83M, PPE 240M */ + li a0,0xe9 +#else /* defined(DDR111) */ + /* 0xea means CPU0/CPU1 333M, DDR 111M, FPI 83M, PPE 240M */ + li a0,0xea +#endif + bal cgu_init + nop +#endif /* CONFIG_SYS_EBU_BOOT */ + + bal ebu_init + nop + +//06063001-joelin disable the PCI CFRAME mask-start +#ifdef DISABLE_CFRAME + li t1, PCI_CR_PCI //mw bf103034 80000000 + li t2, 0x80000000 + sw t2,0(t1) + + li t1, PCI_CR_PCI_MOD_REG //mw be105430 103 + li t2, 0x103 + sw t2,0(t1) + + li t1, CS_CFM //mw b700006c 0 + li t2, 0x00 + sw t2, 0(t1) + + li t1, PCI_CR_PCI_MOD_REG //mw be105430 103 + li t2, 0x1000103 + sw t2, 0(t1) +#endif +//06063001-joelin disable the PCI CFRAME mask-end + +#ifdef CONFIG_SYS_EBU_BOOT +#ifndef CONFIG_SYS_RAMBOOT +#ifdef CONFIG_USE_DDR_RAM + bal ddrram_init + nop +#else + bal sdram_init + nop +#endif +#endif /* CONFIG_SYS_RAMBOOT */ +#endif /* CONFIG_SYS_EBU_BOOT */ + + move ra, t0 + j ra + nop + + .end lowlevel_init diff --git a/package/uboot-lantiq/files/board/arcadyan/arv4518/pmuenable.S b/package/uboot-lantiq/files/board/arcadyan/arv4518/pmuenable.S new file mode 100644 index 000000000..e0d7971d8 --- /dev/null +++ b/package/uboot-lantiq/files/board/arcadyan/arv4518/pmuenable.S @@ -0,0 +1,48 @@ +/* + * Power Management unit initialization code for AMAZON development board. + * + * Copyright (c) 2003 Ou Ke, Infineon. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> +#include <asm/regdef.h> + +#define PMU_PWDCR 0xBF10201C +#define PMU_SR 0xBF102020 + + .globl pmuenable + +pmuenable: + li t0, PMU_PWDCR + li t1, 0x2 /* enable everything */ + sw t1, 0(t0) +#if 0 +1: + li t0, PMU_SR + lw t2, 0(t0) + bne t1, t2, 1b + nop +#endif + j ra + nop + + diff --git a/package/uboot-lantiq/files/board/arcadyan/arv4518/u-boot.lds b/package/uboot-lantiq/files/board/arcadyan/arv4518/u-boot.lds new file mode 100644 index 000000000..9a6cd1b8a --- /dev/null +++ b/package/uboot-lantiq/files/board/arcadyan/arv4518/u-boot.lds @@ -0,0 +1,70 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk Engineering, <wd@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* +OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips") +*/ +OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradbigmips") +OUTPUT_ARCH(mips) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + *(.text) + } + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } + + . = ALIGN(4); + .data : { *(.data) } + + . = .; + _gp = ALIGN(16) + 0x7ff0; + + .got : { + __got_start = .; + *(.got) + __got_end = .; + } + + .sdata : { *(.sdata) } + + .u_boot_cmd : { + __u_boot_cmd_start = .; + *(.u_boot_cmd) + __u_boot_cmd_end = .; + } + + uboot_end_data = .; + num_got_entries = (__got_end - __got_start) >> 2; + + . = ALIGN(4); + .sbss (NOLOAD) : { *(.sbss) } + .bss (NOLOAD) : { *(.bss) . = ALIGN(4); } + uboot_end = .; +} diff --git a/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/Makefile b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/Makefile new file mode 100644 index 000000000..2d0115f8e --- /dev/null +++ b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2003-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +#COBJS := $(BOARD).o +COBJS-y += arv752.o athrs26_phy.o + +SOBJS = lowlevel_init.o pmuenable.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/arv752.c b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/arv752.c new file mode 100644 index 000000000..5b68de958 --- /dev/null +++ b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/arv752.c @@ -0,0 +1,325 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2010 + * Thomas Langer, Ralph Hempel + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <netdev.h> +#include <miiphy.h> +#include <asm/addrspace.h> +#include <asm/danube.h> +#include <asm/reboot.h> +#include <asm/io.h> +#if defined(CONFIG_CMD_HTTPD) +#include <httpd.h> +#endif +#if defined(CONFIG_PCI) +#include <pci.h> +#endif +#include "athrs26_phy.h" + +extern ulong ifx_get_ddr_hz(void); +extern ulong ifx_get_cpuclk(void); + +/* IDs and registers of known external switches */ +void _machine_restart(void) +{ + *DANUBE_RCU_RST_REQ |=1<<30; +} + +#ifdef CONFIG_SYS_RAMBOOT +phys_size_t initdram(int board_type) +{ + return get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM); +} +#elif defined(CONFIG_USE_DDR_RAM) +phys_size_t initdram(int board_type) +{ + return (CONFIG_SYS_MAX_RAM); +} +#else + +static ulong max_sdram_size(void) /* per Chip Select */ +{ + /* The only supported SDRAM data width is 16bit. + */ +#define CFG_DW 4 + + /* The only supported number of SDRAM banks is 4. + */ +#define CFG_NB 4 + + ulong cfgpb0 = *DANUBE_SDRAM_MC_CFGPB0; + int cols = cfgpb0 & 0xF; + int rows = (cfgpb0 & 0xF0) >> 4; + ulong size = (1 << (rows + cols)) * CFG_DW * CFG_NB; + + return size; +} + +/* + * Check memory range for valid RAM. A simple memory test determines + * the actually available RAM size between addresses `base' and + * `base + maxsize'. + */ + +static long int dram_size(long int *base, long int maxsize) +{ + volatile long int *addr; + ulong cnt, val; + ulong save[32]; /* to make test non-destructive */ + unsigned char i = 0; + + for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) { + addr = base + cnt; /* pointer arith! */ + + save[i++] = *addr; + *addr = ~cnt; + } + + /* write 0 to base address */ + addr = base; + save[i] = *addr; + *addr = 0; + + /* check at base address */ + if ((val = *addr) != 0) { + *addr = save[i]; + return (0); + } + + for (cnt = 1; cnt < maxsize / sizeof (long); cnt <<= 1) { + addr = base + cnt; /* pointer arith! */ + + val = *addr; + *addr = save[--i]; + + if (val != (~cnt)) { + return (cnt * sizeof (long)); + } + } + return (maxsize); +} + +phys_size_t initdram(int board_type) +{ + int rows, cols, best_val = *DANUBE_SDRAM_MC_CFGPB0; + ulong size, max_size = 0; + ulong our_address; + + /* load t9 into our_address */ + asm volatile ("move %0, $25" : "=r" (our_address) :); + + /* Can't probe for RAM size unless we are running from Flash. + * find out whether running from DRAM or Flash. + */ + if (CPHYSADDR(our_address) < CPHYSADDR(PHYS_FLASH_1)) + { + return max_sdram_size(); + } + + for (cols = 0x8; cols <= 0xC; cols++) + { + for (rows = 0xB; rows <= 0xD; rows++) + { + *DANUBE_SDRAM_MC_CFGPB0 = (0x14 << 8) | + (rows << 4) | cols; + size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, + max_sdram_size()); + + if (size > max_size) + { + best_val = *DANUBE_SDRAM_MC_CFGPB0; + max_size = size; + } + } + } + + *DANUBE_SDRAM_MC_CFGPB0 = best_val; + return max_size; +} +#endif + +int checkboard (void) +{ + unsigned long chipid = *DANUBE_MPS_CHIPID; + int part_num; + + puts ("Board: ARV75DW22 - Easybox 803\n"); + puts ("SoC: "); + + part_num = DANUBE_MPS_CHIPID_PARTNUM_GET(chipid); + switch (part_num) + { + case 0x129: + case 0x12D: + case 0x12b: + puts("Danube/Twinpass/Vinax-VE "); + break; + default: + printf ("unknown, chip part number 0x%03X ", part_num); + break; + } + printf ("V1.%ld, ", DANUBE_MPS_CHIPID_VERSION_GET(chipid)); + + printf("DDR Speed %ld MHz, ", ifx_get_ddr_hz()/1000000); + printf("CPU Speed %ld MHz\n", ifx_get_cpuclk()/1000000); + + return 0; +} + +#ifdef CONFIG_SKIP_LOWLEVEL_INIT +int board_early_init_f(void) +{ +#ifdef CONFIG_EBU_ADDSEL0 + (*DANUBE_EBU_ADDSEL0) = CONFIG_EBU_ADDSEL0; +#endif +#ifdef CONFIG_EBU_ADDSEL1 + (*DANUBE_EBU_ADDSEL1) = CONFIG_EBU_ADDSEL1; +#endif +#ifdef CONFIG_EBU_ADDSEL2 + (*DANUBE_EBU_ADDSEL2) = CONFIG_EBU_ADDSEL2; +#endif +#ifdef CONFIG_EBU_ADDSEL3 + (*DANUBE_EBU_ADDSEL3) = CONFIG_EBU_ADDSEL3; +#endif +#ifdef CONFIG_EBU_BUSCON0 + (*DANUBE_EBU_BUSCON0) = CONFIG_EBU_BUSCON0; +#endif +#ifdef CONFIG_EBU_BUSCON1 + (*DANUBE_EBU_BUSCON1) = CONFIG_EBU_BUSCON1; +#endif +#ifdef CONFIG_EBU_BUSCON2 + (*DANUBE_EBU_BUSCON2) = CONFIG_EBU_BUSCON2; +#endif +#ifdef CONFIG_EBU_BUSCON3 + (*DANUBE_EBU_BUSCON3) = CONFIG_EBU_BUSCON3; +#endif + + return 0; +} +#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ + + +#ifdef CONFIG_EXTRA_SWITCH +static int external_switch_init(void) +{ + // switch reset pin on arv752 + *DANUBE_GPIO_P1_ALTSEL0 &= ~8; + *DANUBE_GPIO_P1_ALTSEL1 &= ~8; + *DANUBE_GPIO_P1_OD |= 8; + *DANUBE_GPIO_P1_DIR |= 8; + *DANUBE_GPIO_P1_OUT |= 8; + + puts("initializing ar8216 switch... "); + if (athrs26_phy_setup(0)==0) { + printf("initialized\n"); + return 0; + } + puts("failed ... \n"); + return 0; +} +#endif /* CONFIG_EXTRA_SWITCH */ + +int board_eth_init(bd_t *bis) +{ +#if defined(CONFIG_IFX_ETOP) + uchar enetaddr[6]; + if (!eth_getenv_enetaddr("ethaddr", enetaddr)) + eth_setenv_enetaddr("ethaddr", (uchar *)0xb03f0016); + + *DANUBE_PMU_PWDCR &= 0xFFFFEFDF; + *DANUBE_PMU_PWDCR &=~(1<<DANUBE_PMU_DMA_SHIFT);/*enable DMA from PMU*/ + + if (lq_eth_initialize(bis)) + return -1; + + *DANUBE_RCU_RST_REQ |=1; + udelay(200000); + *DANUBE_RCU_RST_REQ &=(unsigned long)~1; + udelay(1000); + +#ifdef CONFIG_EXTRA_SWITCH + if (external_switch_init()<0) + return -1; +#endif /* CONFIG_EXTRA_SWITCH */ +#endif /* CONFIG_IFX_ETOP */ + + return 0; +} + +#if defined(CONFIG_CMD_HTTPD) +int do_http_upgrade(const unsigned char *data, const ulong size) +{ + char buf[128]; + + if(getenv ("ram_addr") == NULL) + return -1; + if(getenv ("kernel_addr") == NULL) + return -1; + /* check the image */ + if(run_command("imi ${ram_addr}", 0) < 0) { + return -1; + } + /* write the image to the flash */ + puts("http ugrade ...\n"); + sprintf(buf, "era ${kernel_addr} +0x%lx; cp.b ${ram_addr} ${kernel_addr} 0x%lx", size, size); + return run_command(buf, 0); +} + +int do_http_progress(const int state) +{ + /* toggle LED's here */ + switch(state) { + case HTTP_PROGRESS_START: + puts("http start\n"); + break; + case HTTP_PROGRESS_TIMEOUT: + puts("."); + break; + case HTTP_PROGRESS_UPLOAD_READY: + puts("http upload ready\n"); + break; + case HTTP_PROGRESS_UGRADE_READY: + puts("http ugrade ready\n"); + break; + case HTTP_PROGRESS_UGRADE_FAILED: + puts("http ugrade failed\n"); + break; + } + return 0; +} + +unsigned long do_http_tmp_address(void) +{ + char *s = getenv ("ram_addr"); + if (s) { + ulong tmp = simple_strtoul (s, NULL, 16); + return tmp; + } + return 0 /*0x80a00000*/; +} + +#endif diff --git a/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/athrs26_phy.c b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/athrs26_phy.c new file mode 100644 index 000000000..2f80ee05e --- /dev/null +++ b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/athrs26_phy.c @@ -0,0 +1,814 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. + */ + +/* + * Manage the atheros ethernet PHY. + * + * All definitions in this file are operating system independent! + */ + +#include <config.h> +#include <linux/types.h> +#include <common.h> +#include <miiphy.h> +//#include "phy.h" +//#include "ar7100_soc.h" +#include "athrs26_phy.h" + +#define phy_reg_read(base, addr, reg, datap) \ + miiphy_read("lq_cpe_eth", addr, reg, datap); +#define phy_reg_write(base, addr, reg, data) \ + miiphy_write("lq_cpe_eth", addr, reg, data); + + +/* PHY selections and access functions */ + +typedef enum { + PHY_SRCPORT_INFO, + PHY_PORTINFO_SIZE, +} PHY_CAP_TYPE; + +typedef enum { + PHY_SRCPORT_NONE, + PHY_SRCPORT_VLANTAG, + PHY_SRCPORT_TRAILER, +} PHY_SRCPORT_TYPE; + +#ifdef DEBUG +#define DRV_DEBUG 1 +#endif +//#define DRV_DEBUG 1 + +#define DRV_DEBUG_PHYERROR 0x00000001 +#define DRV_DEBUG_PHYCHANGE 0x00000002 +#define DRV_DEBUG_PHYSETUP 0x00000004 + +#if DRV_DEBUG +int athrPhyDebug = DRV_DEBUG_PHYERROR|DRV_DEBUG_PHYCHANGE|DRV_DEBUG_PHYSETUP; + +#define DRV_LOG(FLG, X0, X1, X2, X3, X4, X5, X6) \ +{ \ + if (athrPhyDebug & (FLG)) { \ + logMsg(X0, X1, X2, X3, X4, X5, X6); \ + } \ +} + +#define DRV_MSG(x,a,b,c,d,e,f) \ + logMsg(x,a,b,c,d,e,f) + +#define DRV_PRINT(FLG, X) \ +{ \ + if (athrPhyDebug & (FLG)) { \ + printf X; \ + } \ +} + +#else /* !DRV_DEBUG */ +#define DRV_LOG(DBG_SW, X0, X1, X2, X3, X4, X5, X6) +#define DRV_MSG(x,a,b,c,d,e,f) +#define DRV_PRINT(DBG_SW,X) +#endif + +#define ATHR_LAN_PORT_VLAN 1 +#define ATHR_WAN_PORT_VLAN 2 + +#define ENET_UNIT_LAN 0 + +#define TRUE 1 +#define FALSE 0 + +#define ATHR_PHY0_ADDR 0x0 +#define ATHR_PHY1_ADDR 0x1 +#define ATHR_PHY2_ADDR 0x2 +#define ATHR_PHY3_ADDR 0x3 +#define ATHR_PHY4_ADDR 0x4 + +/* + * Track per-PHY port information. + */ +typedef struct { + BOOL isEnetPort; /* normal enet port */ + BOOL isPhyAlive; /* last known state of link */ + int ethUnit; /* MAC associated with this phy port */ + uint32_t phyBase; + uint32_t phyAddr; /* PHY registers associated with this phy port */ + uint32_t VLANTableSetting; /* Value to be written to VLAN table */ +} athrPhyInfo_t; + +/* + * Per-PHY information, indexed by PHY unit number. + */ +static athrPhyInfo_t athrPhyInfo[] = { + {TRUE, /* phy port 0 -- LAN port 0 */ + FALSE, + ENET_UNIT_LAN, + 0, + ATHR_PHY0_ADDR, + ATHR_LAN_PORT_VLAN + }, + + {TRUE, /* phy port 1 -- LAN port 1 */ + FALSE, + ENET_UNIT_LAN, + 0, + ATHR_PHY1_ADDR, + ATHR_LAN_PORT_VLAN + }, + + {TRUE, /* phy port 2 -- LAN port 2 */ + FALSE, + ENET_UNIT_LAN, + 0, + ATHR_PHY2_ADDR, + ATHR_LAN_PORT_VLAN + }, + + {TRUE, /* phy port 3 -- LAN port 3 */ + FALSE, + ENET_UNIT_LAN, + 0, + ATHR_PHY3_ADDR, + ATHR_LAN_PORT_VLAN + }, + + {TRUE, /* phy port 4 -- WAN port or LAN port 4 */ + FALSE, + 1, + 0, + ATHR_PHY4_ADDR, + ATHR_LAN_PORT_VLAN /* Send to all ports */ + }, + + {FALSE, /* phy port 5 -- CPU port (no RJ45 connector) */ + TRUE, + ENET_UNIT_LAN, + 0, + 0x00, + ATHR_LAN_PORT_VLAN /* Send to all ports */ + }, +}; + +#ifdef CFG_ATHRHDR_EN +typedef struct { + uint8_t data[ATHRHDR_MAX_DATA]; + uint8_t len; + uint32_t seq; +} cmd_resp_t; + +typedef struct { + uint16_t reg_addr; + uint16_t cmd_len; + uint8_t *reg_data; +}cmd_write_t; + +static cmd_write_t cmd_write,cmd_read; +static cmd_resp_t cmd_resp; +static struct eth_device *lan_mac; +//static atomic_t seqcnt = ATOMIC_INIT(0); +static int seqcnt = 0; +static int cmd = 1; +//volatile uchar AthrHdrPkt[60]; +#endif + +#define ATHR_GLOBALREGBASE 0 + +//#define ATHR_PHY_MAX (sizeof(athrPhyInfo) / sizeof(athrPhyInfo[0])) +#define ATHR_PHY_MAX 5 + +/* Range of valid PHY IDs is [MIN..MAX] */ +#define ATHR_ID_MIN 0 +#define ATHR_ID_MAX (ATHR_PHY_MAX-1) + +/* Convenience macros to access myPhyInfo */ +#define ATHR_IS_ENET_PORT(phyUnit) (athrPhyInfo[phyUnit].isEnetPort) +#define ATHR_IS_PHY_ALIVE(phyUnit) (athrPhyInfo[phyUnit].isPhyAlive) +#define ATHR_ETHUNIT(phyUnit) (athrPhyInfo[phyUnit].ethUnit) +#define ATHR_PHYBASE(phyUnit) (athrPhyInfo[phyUnit].phyBase) +#define ATHR_PHYADDR(phyUnit) (athrPhyInfo[phyUnit].phyAddr) +#define ATHR_VLAN_TABLE_SETTING(phyUnit) (athrPhyInfo[phyUnit].VLANTableSetting) + + +#define ATHR_IS_ETHUNIT(phyUnit, ethUnit) \ + (ATHR_IS_ENET_PORT(phyUnit) && \ + ATHR_ETHUNIT(phyUnit) == (ethUnit)) + +#define ATHR_IS_WAN_PORT(phyUnit) (!(ATHR_ETHUNIT(phyUnit)==ENET_UNIT_LAN)) + +/* Forward references */ +BOOL athrs26_phy_is_link_alive(int phyUnit); +static uint32_t athrs26_reg_read(uint16_t reg_addr); +static void athrs26_reg_write(uint16_t reg_addr, + uint32_t reg_val); + +/****************************************************************************** +* +* athrs26_phy_is_link_alive - test to see if the specified link is alive +* +* RETURNS: +* TRUE --> link is alive +* FALSE --> link is down +*/ + +void athrs26_reg_init() +{ + + athrs26_reg_write(0x200, 0x200); + athrs26_reg_write(0x300, 0x200); + athrs26_reg_write(0x400, 0x200); + athrs26_reg_write(0x500, 0x200); + athrs26_reg_write(0x600, 0x7d); + +#ifdef S26_VER_1_0 + phy_reg_write(0, 0, 29, 41); + phy_reg_write(0, 0, 30, 0); + phy_reg_write(0, 1, 29, 41); + phy_reg_write(0, 1, 30, 0); + phy_reg_write(0, 2, 29, 41); + phy_reg_write(0, 2, 30, 0); + phy_reg_write(0, 3, 29, 41); + phy_reg_write(0, 3, 30, 0); + phy_reg_write(0, 4, 29, 41); + phy_reg_write(0, 4, 30, 0); +#endif + + athrs26_reg_write(0x38, 0xc000050e); + +#ifdef CFG_ATHRHDR_EN + athrs26_reg_write(0x104, 0x4804); +#else + athrs26_reg_write(0x104, 0x4004); +#endif + + athrs26_reg_write(0x60, 0xffffffff); + athrs26_reg_write(0x64, 0xaaaaaaaa); + athrs26_reg_write(0x68, 0x55555555); + athrs26_reg_write(0x6c, 0x0); + + athrs26_reg_write(0x70, 0x41af); +} + +BOOL +athrs26_phy_is_link_alive(int phyUnit) +{ + uint16_t phyHwStatus; + uint32_t phyBase; + uint32_t phyAddr; + + phyBase = ATHR_PHYBASE(phyUnit); + phyAddr = ATHR_PHYADDR(phyUnit); + + phy_reg_read(phyBase, phyAddr, ATHR_PHY_SPEC_STATUS, &phyHwStatus); + + if (phyHwStatus & ATHR_STATUS_LINK_PASS) + return TRUE; + + return FALSE; +} + + +/****************************************************************************** +* +* athrs26_phy_setup - reset and setup the PHY associated with +* the specified MAC unit number. +* +* Resets the associated PHY port. +* +* RETURNS: +* TRUE --> associated PHY is alive +* FALSE --> no LINKs on this ethernet unit +*/ + +BOOL +athrs26_phy_setup(int ethUnit) +{ + int phyUnit; + uint16_t phyHwStatus; + uint16_t timeout; + int liveLinks = 0; + uint32_t phyBase = 0; + BOOL foundPhy = FALSE; + uint32_t phyAddr = 0; + uint32_t regVal; + + + /* See if there's any configuration data for this enet */ + /* start auto negogiation on each phy */ + for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) { + if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) { + continue; + } + + + foundPhy = TRUE; + phyBase = ATHR_PHYBASE(phyUnit); + phyAddr = ATHR_PHYADDR(phyUnit); + + phy_reg_write(phyBase, phyAddr, ATHR_AUTONEG_ADVERT, + ATHR_ADVERTISE_ALL); + + /* Reset PHYs*/ + phy_reg_write(phyBase, phyAddr, ATHR_PHY_CONTROL, + ATHR_CTRL_AUTONEGOTIATION_ENABLE + | ATHR_CTRL_SOFTWARE_RESET); + + } + + if (!foundPhy) { + return FALSE; /* No PHY's configured for this ethUnit */ + } + + /* + * After the phy is reset, it takes a little while before + * it can respond properly. + */ + sysMsDelay(1000); + + /* + * Wait up to .75 seconds for ALL associated PHYs to finish + * autonegotiation. The only way we get out of here sooner is + * if ALL PHYs are connected AND finish autonegotiation. + */ + for (phyUnit=0; (phyUnit < ATHR_PHY_MAX) /*&& (timeout > 0) */; phyUnit++) { + if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) { + continue; + } + + timeout=20; + for (;;) { + phyHwStatus = 0; + phy_reg_read(phyBase, phyAddr, ATHR_PHY_CONTROL, &phyHwStatus); + + if (ATHR_RESET_DONE(phyHwStatus)) { + DRV_PRINT(DRV_DEBUG_PHYSETUP, + ("Port %d, Neg Success\n", phyUnit)); + break; + } + if (timeout == 0) { + DRV_PRINT(DRV_DEBUG_PHYSETUP, + ("Port %d, Negogiation timeout\n", phyUnit)); + break; + } + if (--timeout == 0) { + DRV_PRINT(DRV_DEBUG_PHYSETUP, + ("Port %d, Negogiation timeout\n", phyUnit)); + break; + } + + sysMsDelay(150); + } + } + + /* + * All PHYs have had adequate time to autonegotiate. + * Now initialize software status. + * + * It's possible that some ports may take a bit longer + * to autonegotiate; but we can't wait forever. They'll + * get noticed by mv_phyCheckStatusChange during regular + * polling activities. + */ + for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) { + if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) { + continue; + } + + if (athrs26_phy_is_link_alive(phyUnit)) { + liveLinks++; + ATHR_IS_PHY_ALIVE(phyUnit) = TRUE; + } else { + ATHR_IS_PHY_ALIVE(phyUnit) = FALSE; + } + + phy_reg_read(ATHR_PHYBASE(phyUnit), ATHR_PHYADDR(phyUnit), + ATHR_PHY_SPEC_STATUS, ®Val); + DRV_PRINT(DRV_DEBUG_PHYSETUP, + ("eth%d: Phy Specific Status=%4.4x\n", ethUnit, regVal)); + } +#if 0 + /* if using header for register configuration, we have to */ + /* configure s26 register after frame transmission is enabled */ + + athrs26_reg_write(0x200, 0x200); + athrs26_reg_write(0x300, 0x200); + athrs26_reg_write(0x400, 0x200); + athrs26_reg_write(0x500, 0x200); + athrs26_reg_write(0x600, 0x200); + athrs26_reg_write(0x38, 0x50e); +#endif +#ifndef CFG_ATHRHDR_EN +/* if using header for register configuration, we have to */ + /* configure s26 register after frame transmission is enabled */ + athrs26_reg_init(); +#endif + + return (liveLinks > 0); +} + +/****************************************************************************** +* +* athrs26_phy_is_fdx - Determines whether the phy ports associated with the +* specified device are FULL or HALF duplex. +* +* RETURNS: +* 1 --> FULL +* 0 --> HALF +*/ +int +athrs26_phy_is_fdx(int ethUnit) +{ + int phyUnit; + uint32_t phyBase; + uint32_t phyAddr; + uint16_t phyHwStatus; + int ii = 200; + + if (ethUnit == ENET_UNIT_LAN) + return TRUE; + + for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) { + if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) { + continue; + } + + if (athrs26_phy_is_link_alive(phyUnit)) { + + phyBase = ATHR_PHYBASE(phyUnit); + phyAddr = ATHR_PHYADDR(phyUnit); + + do { + phy_reg_read(phyBase, phyAddr, ATHR_PHY_SPEC_STATUS, &phyHwStatus); + sysMsDelay(10); + } while((!(phyHwStatus & ATHR_STATUS_RESOVLED)) && --ii); + + if (phyHwStatus & ATHER_STATUS_FULL_DEPLEX) + return TRUE; + } + } + + return FALSE; +} + + +/****************************************************************************** +* +* athrs26_phy_speed - Determines the speed of phy ports associated with the +* specified device. +* +* RETURNS: +* AG7100_PHY_SPEED_10T, AG7100_PHY_SPEED_100TX; +* AG7100_PHY_SPEED_1000T; +*/ + +BOOL +athrs26_phy_speed(int ethUnit) +{ + int phyUnit; + uint16_t phyHwStatus; + uint32_t phyBase; + uint32_t phyAddr; + int ii = 200; + + if (ethUnit == ENET_UNIT_LAN) + return _100BASET; + + for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) { + if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) { + continue; + } + + if (athrs26_phy_is_link_alive(phyUnit)) { + + phyBase = ATHR_PHYBASE(phyUnit); + phyAddr = ATHR_PHYADDR(phyUnit); + + do { + phy_reg_read(phyBase, phyAddr, + ATHR_PHY_SPEC_STATUS, &phyHwStatus); + sysMsDelay(10); + }while((!(phyHwStatus & ATHR_STATUS_RESOVLED)) && --ii); + + phyHwStatus = ((phyHwStatus & ATHER_STATUS_LINK_MASK) >> + ATHER_STATUS_LINK_SHIFT); + + switch(phyHwStatus) { + case 0: + return _10BASET; + case 1: + return _100BASET; + case 2: + return _1000BASET; + default: + DRV_PRINT(DRV_DEBUG_PHYERROR, ("Unkown speed read!\n")); + } + } + } + + return _10BASET; +} + +/***************************************************************************** +* +* athr_phy_is_up -- checks for significant changes in PHY state. +* +* A "significant change" is: +* dropped link (e.g. ethernet cable unplugged) OR +* autonegotiation completed + link (e.g. ethernet cable plugged in) +* +* When a PHY is plugged in, phyLinkGained is called. +* When a PHY is unplugged, phyLinkLost is called. +*/ + +int +athrs26_phy_is_up(int ethUnit) +{ + int phyUnit; + uint16_t phyHwStatus; + athrPhyInfo_t *lastStatus; + int linkCount = 0; + int lostLinks = 0; + int gainedLinks = 0; + uint32_t phyBase; + uint32_t phyAddr; +#ifdef CFG_ATHRHDR_REG + /* if using header to config s26, the link of MAC0 should always be up */ + if (ethUnit == ENET_UNIT_LAN) + return 1; +#endif + + for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) { + if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) { + continue; + } + + phyBase = ATHR_PHYBASE(phyUnit); + phyAddr = ATHR_PHYADDR(phyUnit); + + + lastStatus = &athrPhyInfo[phyUnit]; + phy_reg_read(phyBase, phyAddr, ATHR_PHY_SPEC_STATUS, &phyHwStatus); + + if (lastStatus->isPhyAlive) { /* last known link status was ALIVE */ + /* See if we've lost link */ + if (phyHwStatus & ATHR_STATUS_LINK_PASS) { + linkCount++; + } else { + lostLinks++; + DRV_PRINT(DRV_DEBUG_PHYCHANGE,("\nenet%d port%d down\n", + ethUnit, phyUnit)); + lastStatus->isPhyAlive = FALSE; + } + } else { /* last known link status was DEAD */ + /* Check for reset complete */ + phy_reg_read(phyBase, phyAddr, ATHR_PHY_STATUS, &phyHwStatus); + if (!ATHR_RESET_DONE(phyHwStatus)) + continue; + + /* Check for AutoNegotiation complete */ + if (ATHR_AUTONEG_DONE(phyHwStatus)) { + //printk("autoneg done\n"); + gainedLinks++; + linkCount++; + DRV_PRINT(DRV_DEBUG_PHYCHANGE,("\nenet%d port%d up\n", + ethUnit, phyUnit)); + lastStatus->isPhyAlive = TRUE; + } + } + } + + return (linkCount); + +#if 0 + if (linkCount == 0) { + if (lostLinks) { + /* We just lost the last link for this MAC */ + phyLinkLost(ethUnit); + } + } else { + if (gainedLinks == linkCount) { + /* We just gained our first link(s) for this MAC */ + phyLinkGained(ethUnit); + } + } +#endif +} + +#ifdef CFG_ATHRHDR_EN +void athr_hdr_timeout(void){ + eth_halt(); + NetState = NETLOOP_FAIL; +} + +void athr_hdr_handler(uchar *recv_pkt, unsigned dest, unsigned src, unsigned len){ + header_receive_pkt(recv_pkt); + NetState = NETLOOP_SUCCESS; +} +static int +athrs26_header_config_reg (struct eth_device *dev, uint8_t wr_flag, + uint16_t reg_addr, uint16_t cmd_len, + uint8_t *val) +{ + at_header_t at_header; + reg_cmd_t reg_cmd; + uchar *AthrHdrPkt; + + AthrHdrPkt = NetTxPacket; + + if(AthrHdrPkt == NULL) { + printf("Null packet\n"); + return; + } + memset(AthrHdrPkt,0,60); + + /*fill at_header*/ + at_header.reserved0 = 0x10; //default + at_header.priority = 0; + at_header.type = 0x5; + at_header.broadcast = 0; + at_header.from_cpu = 1; + at_header.reserved1 = 0x01; //default + at_header.port_num = 0; + + AthrHdrPkt[0] = at_header.port_num; + AthrHdrPkt[0] |= at_header.reserved1 << 4; + AthrHdrPkt[0] |= at_header.from_cpu << 6; + AthrHdrPkt[0] |= at_header.broadcast << 7; + + AthrHdrPkt[1] = at_header.type; + AthrHdrPkt[1] |= at_header.priority << 4; + AthrHdrPkt[1] |= at_header.reserved0 << 6; + + + /*fill reg cmd*/ + if(cmd_len > 4) + cmd_len = 4;//only support 32bits register r/w + + reg_cmd.reg_addr = reg_addr&0x3FFFC; + reg_cmd.cmd_len = cmd_len; + reg_cmd.cmd = wr_flag; + reg_cmd.reserved2 = 0x5; //default + reg_cmd.seq_num = seqcnt; + + AthrHdrPkt[2] = reg_cmd.reg_addr & 0xff; + AthrHdrPkt[3] = (reg_cmd.reg_addr & 0xff00) >> 8; + AthrHdrPkt[4] = (reg_cmd.reg_addr & 0x30000) >> 16; + AthrHdrPkt[4] |= reg_cmd.cmd_len << 4; + AthrHdrPkt[5] = reg_cmd.cmd << 4; + AthrHdrPkt[5] |= reg_cmd.reserved2 << 5; + AthrHdrPkt[6] = (reg_cmd.seq_num & 0x7f) << 1; + AthrHdrPkt[7] = (reg_cmd.seq_num & 0x7f80) >> 7; + AthrHdrPkt[8] = (reg_cmd.seq_num & 0x7f8000) >> 15; + AthrHdrPkt[9] = (reg_cmd.seq_num & 0x7f800000) >> 23; + + /*fill reg data*/ + if(!wr_flag)//write + memcpy((AthrHdrPkt + 10), val, cmd_len); + + /*start xmit*/ + if(dev == NULL) { + printf("ERROR device not found\n"); + return -1; + } + header_xmit(dev, AthrHdrPkt ,60); + return 0; +} +void athr_hdr_func(void) { + + NetSetTimeout (1 * CFG_HZ,athr_hdr_timeout ); + NetSetHandler (athr_hdr_handler); + + if(cmd) + athrs26_header_config_reg(lan_mac, cmd, cmd_read.reg_addr, cmd_read.cmd_len, cmd_read.reg_data); + else + athrs26_header_config_reg(lan_mac, cmd, cmd_write.reg_addr, cmd_write.cmd_len, cmd_write.reg_data); +} +static int +athrs26_header_write_reg(uint16_t reg_addr, uint16_t cmd_len, uint8_t *reg_data) +{ + int i = 2; + cmd_write.reg_addr = reg_addr; + cmd_write.cmd_len = cmd_len; + cmd_write.reg_data = reg_data; + cmd = 0; + seqcnt++; + + do { + if (NetLoop(ATHRHDR) >= 0) /* polls for read/write ack from PHY */ + break; + } while (i--); + + return i; +} + +static int +athrs26_header_read_reg(uint16_t reg_addr, uint16_t cmd_len, uint8_t *reg_data) +{ + int i = 2; + + cmd_read.reg_addr = reg_addr; + cmd_read.cmd_len = cmd_len; + cmd_read.reg_data = reg_data; + cmd = 1; + seqcnt++; + + do { + if (NetLoop(ATHRHDR) >= 0) /* polls for read/write ack from PHY */ + break; + } while (i--); + + if ((i==0) || (seqcnt != cmd_resp.seq) || (cmd_len != cmd_resp.len)) { + return -1; + } + memcpy (cmd_read.reg_data, cmd_resp.data, cmd_len); + return 0; +} +int header_receive_pkt(uchar *recv_pkt) +{ + cmd_resp.len = recv_pkt[4] >> 4; + if (cmd_resp.len > 10) + goto out; + + cmd_resp.seq = recv_pkt[6] >> 1; + cmd_resp.seq |= recv_pkt[7] << 7; + cmd_resp.seq |= recv_pkt[8] << 15; + cmd_resp.seq |= recv_pkt[9] << 23; + + if (cmd_resp.seq < seqcnt) + goto out; + memcpy (cmd_resp.data, (recv_pkt + 10), cmd_resp.len); +out: + return 0; +} + +void athrs26_reg_dev(struct eth_device *mac) +{ + lan_mac = mac; +} + +#endif + +static uint32_t +athrs26_reg_read(uint16_t reg_addr) +{ +#ifndef CFG_ATHRHDR_REG + uint16_t reg_word_addr = reg_addr / 2, phy_val; + uint32_t phy_addr; + uint8_t phy_reg; + + /* configure register high address */ + phy_addr = 0x18; + phy_reg = 0x0; + phy_val = (reg_word_addr >> 8) & 0x1ff; /* bit16-8 of reg address*/ + phy_reg_write (0, phy_addr, phy_reg, phy_val); + + /* read register with low address */ + phy_addr = 0x10 | ((reg_word_addr >> 5) & 0x7); /* bit7-5 of reg address */ + phy_reg = reg_word_addr & 0x1f; /* bit 4-0 of reg address*/ + phy_reg_read(0, phy_addr, phy_reg, &phy_val); + + return phy_val; +#else + uint8_t reg_data[4]; + + memset (reg_data, 0, 4); + athrs26_header_read_reg(reg_addr, 4, reg_data); + return (reg_data[0] | (reg_data[1] << 8) | (reg_data[2] << 16) | (reg_data[3] << 24)); +#endif +} + +static void +athrs26_reg_write(uint16_t reg_addr, uint32_t reg_val) +{ +#ifndef CFG_ATHRHDR_REG + uint16_t reg_word_addr = reg_addr / 2, phy_val; + uint32_t phy_addr; + uint8_t phy_reg; + + /* configure register high address */ + phy_addr = 0x18; + phy_reg = 0x0; + phy_val = (reg_word_addr >> 8) & 0x1ff; /* bit16-8 of reg address*/ + phy_reg_write (0, phy_addr, phy_reg, phy_val); + + /* read register with low address */ + phy_addr = 0x10 | ((reg_word_addr >> 5) & 0x7); /* bit7-5 of reg address */ + phy_reg = reg_word_addr & 0x1f; /* bit 4-0 of reg address */ + phy_reg_write (0, phy_addr, phy_reg, reg_val); +#else + uint8_t reg_data[4]; + + memset (reg_data, 0, 4); + reg_data[0] = (uint8_t)(0x00ff & reg_val); + reg_data[1] = (uint8_t)((0xff00 & reg_val) >> 8); + reg_data[2] = (uint8_t)((0xff0000 & reg_val) >> 16); + reg_data[3] = (uint8_t)((0xff000000 & reg_val) >> 24); + + athrs26_header_write_reg (reg_addr, 4, reg_data); +#endif + +} + diff --git a/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/athrs26_phy.h b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/athrs26_phy.h new file mode 100644 index 000000000..0fdde376e --- /dev/null +++ b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/athrs26_phy.h @@ -0,0 +1,134 @@ +#ifndef _ATHRS26_PHY_H +#define _ATHRS26_PHY_H + +/*****************/ +/* PHY Registers */ +/*****************/ +#define ATHR_PHY_CONTROL 0 +#define ATHR_PHY_STATUS 1 +#define ATHR_PHY_ID1 2 +#define ATHR_PHY_ID2 3 +#define ATHR_AUTONEG_ADVERT 4 +#define ATHR_LINK_PARTNER_ABILITY 5 +#define ATHR_AUTONEG_EXPANSION 6 +#define ATHR_NEXT_PAGE_TRANSMIT 7 +#define ATHR_LINK_PARTNER_NEXT_PAGE 8 +#define ATHR_1000BASET_CONTROL 9 +#define ATHR_1000BASET_STATUS 10 +#define ATHR_PHY_SPEC_CONTROL 16 +#define ATHR_PHY_SPEC_STATUS 17 +#define ATHR_DEBUG_PORT_ADDRESS 29 +#define ATHR_DEBUG_PORT_DATA 30 + +/* ATHR_PHY_CONTROL fields */ +#define ATHR_CTRL_SOFTWARE_RESET 0x8000 +#define ATHR_CTRL_SPEED_LSB 0x2000 +#define ATHR_CTRL_AUTONEGOTIATION_ENABLE 0x1000 +#define ATHR_CTRL_RESTART_AUTONEGOTIATION 0x0200 +#define ATHR_CTRL_SPEED_FULL_DUPLEX 0x0100 +#define ATHR_CTRL_SPEED_MSB 0x0040 + +#define ATHR_RESET_DONE(phy_control) \ + (((phy_control) & (ATHR_CTRL_SOFTWARE_RESET)) == 0) + +/* Phy status fields */ +#define ATHR_STATUS_AUTO_NEG_DONE 0x0020 + +#define ATHR_AUTONEG_DONE(ip_phy_status) \ + (((ip_phy_status) & \ + (ATHR_STATUS_AUTO_NEG_DONE)) == \ + (ATHR_STATUS_AUTO_NEG_DONE)) + +/* Link Partner ability */ +#define ATHR_LINK_100BASETX_FULL_DUPLEX 0x0100 +#define ATHR_LINK_100BASETX 0x0080 +#define ATHR_LINK_10BASETX_FULL_DUPLEX 0x0040 +#define ATHR_LINK_10BASETX 0x0020 + +/* Advertisement register. */ +#define ATHR_ADVERTISE_NEXT_PAGE 0x8000 +#define ATHR_ADVERTISE_ASYM_PAUSE 0x0800 +#define ATHR_ADVERTISE_PAUSE 0x0400 +#define ATHR_ADVERTISE_100FULL 0x0100 +#define ATHR_ADVERTISE_100HALF 0x0080 +#define ATHR_ADVERTISE_10FULL 0x0040 +#define ATHR_ADVERTISE_10HALF 0x0020 + +#define ATHR_ADVERTISE_ALL (ATHR_ADVERTISE_10HALF | ATHR_ADVERTISE_10FULL | \ + ATHR_ADVERTISE_100HALF | ATHR_ADVERTISE_100FULL) + +/* 1000BASET_CONTROL */ +#define ATHR_ADVERTISE_1000FULL 0x0200 + +/* Phy Specific status fields */ +#define ATHER_STATUS_LINK_MASK 0xC000 +#define ATHER_STATUS_LINK_SHIFT 14 +#define ATHER_STATUS_FULL_DEPLEX 0x2000 +#define ATHR_STATUS_LINK_PASS 0x0400 +#define ATHR_STATUS_RESOVLED 0x0800 + +/*phy debug port register */ +#define ATHER_DEBUG_SERDES_REG 5 + +/* Serdes debug fields */ +#define ATHER_SERDES_BEACON 0x0100 + +#ifndef BOOL +#define BOOL int +#define TRUE 1 +#define FALSE 0 +#endif + +#define sysMsDelay(_x) udelay((_x) * 1000) + +#undef S26_VER_1_0 + +#ifdef CFG_ATHRHDR_EN + +#include <net.h> +#define header_xmit(dev,pkt,len) dev->send(dev,pkt,len) //dev_queue_xmit(skb) +#define header_recv_ack(dev) dev->recv(dev) //dev_queue_xmit(skb) + +typedef enum { + NORMAL_PACKET, + RESERVED0, + MIB_1ST, + RESERVED1, + RESERVED2, + READ_WRITE_REG, + READ_WRITE_REG_ACK, + RESERVED3 +} ATHR_HDR_TYPE; + +typedef struct { + uint16_t reserved0; + uint16_t priority; + uint16_t type ; + uint16_t broadcast; + uint16_t from_cpu; + uint16_t reserved1; + uint16_t port_num; +}at_header_t; + +typedef struct { + uint64_t reg_addr; + uint64_t reserved0; + uint64_t cmd_len; + uint64_t reserved1; + uint64_t cmd; + uint64_t reserved2; + uint64_t seq_num; +}reg_cmd_t; +void athrs26_reg_init(void); +int header_receive_pkt(uchar *pkt); +void athrs26_reg_dev(struct eth_device *mac); + +#endif + +int athrs26_phy_is_up(int unit); +int athrs26_phy_is_fdx(int unit); +int athrs26_phy_speed(int unit); +BOOL athrs26_phy_setup(int unit); + +#endif /* _ATHRS26_PHY_H */ + diff --git a/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/config.mk b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/config.mk new file mode 100644 index 000000000..c0e5d8244 --- /dev/null +++ b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/config.mk @@ -0,0 +1,60 @@ +# +# (C) Copyright 2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# Danube board with MIPS 24Kc CPU core +# +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp + +ifdef CONFIG_LZMA_BOOTSTRAP + +ifdef BUILD_BOOTSTRAP + +$(info BUILD_BOOTSTRAP ) +#TEXT_BASE = 0xB0000000 +TEXT_BASE = 0x80010000 + +else # BUILD_BOOTSTRAP + +ifndef TEXT_BASE +$(info redefine TEXT_BASE = 0x80040000 ) +TEXT_BASE = 0x80040000 +endif + +endif # BUILD_BOOTSTRAP + +else + +ifdef BUILD_BOOTSTRAP +$(error BUILD_BOOTSTRAP but not enabled in config) +endif + +ifndef TEXT_BASE +## Standard: boot from ebu +$(info redefine TEXT_BASE = 0xB0000000 ) +TEXT_BASE = 0xB0000000 +## For testing: boot from RAM +# TEXT_BASE = 0x80100000 +endif + +endif # CONFIG_LZMA_BOOTSTRAP diff --git a/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/ddr_settings.h b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/ddr_settings.h new file mode 100644 index 000000000..4df6f1170 --- /dev/null +++ b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/ddr_settings.h @@ -0,0 +1,50 @@ +/* Settings for Denali DDR SDRAM controller */ +/* Optimise for DDR PSC A3S12D40ETP for arv4518pw Danube Board DDR 166 Mhz - by Ngp 14th Sept. 2010 */ + +#define MC_DC0_VALUE 0x1B1B +#define MC_DC1_VALUE 0x0 +#define MC_DC2_VALUE 0x0 +#define MC_DC3_VALUE 0x0 +#define MC_DC4_VALUE 0x0 +#define MC_DC5_VALUE 0x200 +#define MC_DC6_VALUE 0x605 +#define MC_DC7_VALUE 0x303 +#define MC_DC8_VALUE 0x102 +#define MC_DC9_VALUE 0x70a +#define MC_DC10_VALUE 0x203 +#define MC_DC11_VALUE 0xc02 +#define MC_DC12_VALUE 0x1C8 +#define MC_DC13_VALUE 0x1 +#define MC_DC14_VALUE 0x0 +#define MC_DC15_VALUE 0x130 /* WDQS tuning for clk_wr*/ +#define MC_DC16_VALUE 0xC800 +#define MC_DC17_VALUE 0xd +#define MC_DC18_VALUE 0x301 +#define MC_DC19_VALUE 0x200 +#define MC_DC20_VALUE 0xA03 /* A04 for reference board, A03 for Eval board */ +#define MC_DC21_VALUE 0x1b00 +#define MC_DC22_VALUE 0x1b1b +#define MC_DC23_VALUE 0x0 +#define MC_DC24_VALUE 0x59 /* WDQS Tuning for DQS */ +#define MC_DC25_VALUE 0x0 +#define MC_DC26_VALUE 0x0 +#define MC_DC27_VALUE 0x0 +#define MC_DC28_VALUE 0x510 +#define MC_DC29_VALUE 0x4e20 +#define MC_DC30_VALUE 0x8235 +#define MC_DC31_VALUE 0x0 +#define MC_DC32_VALUE 0x0 +#define MC_DC33_VALUE 0x0 +#define MC_DC34_VALUE 0x0 +#define MC_DC35_VALUE 0x0 +#define MC_DC36_VALUE 0x0 +#define MC_DC37_VALUE 0x0 +#define MC_DC38_VALUE 0x0 +#define MC_DC39_VALUE 0x0 +#define MC_DC40_VALUE 0x0 +#define MC_DC41_VALUE 0x0 +#define MC_DC42_VALUE 0x0 +#define MC_DC43_VALUE 0x0 +#define MC_DC44_VALUE 0x0 +#define MC_DC45_VALUE 0x500 +#define MC_DC46_VALUE 0x0 diff --git a/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/ddr_settings_psc_166.h b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/ddr_settings_psc_166.h new file mode 100644 index 000000000..445b7dac1 --- /dev/null +++ b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/ddr_settings_psc_166.h @@ -0,0 +1,51 @@ +/* Settings for Denali DDR SDRAM controller */ +/* Optimise for PSC DDR A2S56D40CTP for Danube Ref Board DDR 166 Mhz - by Ng Aik Ann 27th Nov 2006 */ + +#define MC_DC0_VALUE 0x1B1B +#define MC_DC1_VALUE 0x0 +#define MC_DC2_VALUE 0x0 +#define MC_DC3_VALUE 0x0 +#define MC_DC4_VALUE 0x0 +#define MC_DC5_VALUE 0x200 +#define MC_DC6_VALUE 0x605 +#define MC_DC7_VALUE 0x303 +#define MC_DC8_VALUE 0x102 +#define MC_DC9_VALUE 0x70a +#define MC_DC10_VALUE 0x203 +#define MC_DC11_VALUE 0xc02 +#define MC_DC12_VALUE 0x1C8 +#define MC_DC13_VALUE 0x1 +#define MC_DC14_VALUE 0x0 +#define MC_DC15_VALUE 0x120 /* WDQS tuning for clk_wr*/ +#define MC_DC16_VALUE 0xC800 +#define MC_DC17_VALUE 0xd +#define MC_DC18_VALUE 0x301 +#define MC_DC19_VALUE 0x200 +#define MC_DC20_VALUE 0xA04 /* A04 for reference board, A03 for Eval board */ +#define MC_DC21_VALUE 0x1700 +#define MC_DC22_VALUE 0x1717 +#define MC_DC23_VALUE 0x0 +#define MC_DC24_VALUE 0x52 /* WDQS Tuning for DQS */ +#define MC_DC25_VALUE 0x0 +#define MC_DC26_VALUE 0x0 +#define MC_DC27_VALUE 0x0 +#define MC_DC28_VALUE 0x510 +#define MC_DC29_VALUE 0x4e20 +#define MC_DC30_VALUE 0x8235 +#define MC_DC31_VALUE 0x0 +#define MC_DC32_VALUE 0x0 +#define MC_DC33_VALUE 0x0 +#define MC_DC34_VALUE 0x0 +#define MC_DC35_VALUE 0x0 +#define MC_DC36_VALUE 0x0 +#define MC_DC37_VALUE 0x0 +#define MC_DC38_VALUE 0x0 +#define MC_DC39_VALUE 0x0 +#define MC_DC40_VALUE 0x0 +#define MC_DC41_VALUE 0x0 +#define MC_DC42_VALUE 0x0 +#define MC_DC43_VALUE 0x0 +#define MC_DC44_VALUE 0x0 +#define MC_DC45_VALUE 0x500 +//#define MC_DC45_VALUE 0x400 +#define MC_DC46_VALUE 0x0 diff --git a/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/lowlevel_init.S b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/lowlevel_init.S new file mode 100644 index 000000000..2f2c2255e --- /dev/null +++ b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/lowlevel_init.S @@ -0,0 +1,622 @@ +/* + * Memory sub-system initialization code for Danube board. + * Andre Messerschmidt + * Copyright (c) 2005 Infineon Technologies AG + * + * Based on Inca-IP code + * Copyright (c) 2003 Wolfgang Denk <wd@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +/* History: + peng liu May 25, 2006, for PLL setting after reset, 05252006 + */ +#include <config.h> +#include <version.h> +#include <asm/regdef.h> + +#if 0 + +#if defined(CONFIG_USE_DDR_RAM) + +#if defined(CONFIG_USE_DDR_RAM_CFG_111M) +#include "ddr_settings_r111.h" +#define DDR111 +#elif defined(CONFIG_USE_DDR_RAM_CFG_166M) +#include "ddr_settings_r166.h" +#define DDR166 +#elif defined(CONFIG_USE_DDR_RAM_CFG_e111M) +#include "ddr_settings_e111.h" +#define DDR111 +#elif defined(CONFIG_USE_DDR_RAM_CFG_e166M) +#include "ddr_settings_e166.h" +#define DDR166 +#elif defined(CONFIG_USE_DDR_RAM_CFG_promos400) +#include "ddr_settings_PROMOSDDR400.h" +#define DDR166 +#elif defined(CONFIG_USE_DDR_RAM_CFG_samsung166) +#include "ddr_settings_Samsung_166.h" +#define DDR166 +#elif defined(CONFIG_USE_DDR_RAM_CFG_psc166) +#include "ddr_settings_psc_166.h" +#define DDR166 +#else +#warning "missing definition for ddr_settings.h, use default!" +#include "ddr_settings.h" +#endif +#endif /* CONFIG_USE_DDR_RAM */ + +#else + +#include "ddr_settings_psc_166.h" +#define DDR166 + +#endif + +#if defined(CONFIG_USE_DDR_RAM) && !defined(MC_DC0_VALUE) +#error "missing include of ddr_settings.h" +#endif + +#define EBU_MODUL_BASE 0xBE105300 +#define EBU_CLC(value) 0x0000(value) +#define EBU_CON(value) 0x0010(value) +#define EBU_ADDSEL0(value) 0x0020(value) +#define EBU_ADDSEL1(value) 0x0024(value) +#define EBU_ADDSEL2(value) 0x0028(value) +#define EBU_ADDSEL3(value) 0x002C(value) +#define EBU_BUSCON0(value) 0x0060(value) +#define EBU_BUSCON1(value) 0x0064(value) +#define EBU_BUSCON2(value) 0x0068(value) +#define EBU_BUSCON3(value) 0x006C(value) + +#define MC_MODUL_BASE 0xBF800000 +#define MC_ERRCAUSE(value) 0x0010(value) +#define MC_ERRADDR(value) 0x0020(value) +#define MC_CON(value) 0x0060(value) + +#define MC_SRAM_ENABLE 0x00000004 +#define MC_SDRAM_ENABLE 0x00000002 +#define MC_DDRRAM_ENABLE 0x00000001 + +#define MC_SDR_MODUL_BASE 0xBF800200 +#define MC_IOGP(value) 0x0000(value) +#define MC_CTRLENA(value) 0x0010(value) +#define MC_MRSCODE(value) 0x0020(value) +#define MC_CFGDW(value) 0x0030(value) +#define MC_CFGPB0(value) 0x0040(value) +#define MC_LATENCY(value) 0x0080(value) +#define MC_TREFRESH(value) 0x0090(value) +#define MC_SELFRFSH(value) 0x00A0(value) + +#define MC_DDR_MODUL_BASE 0xBF801000 +#define MC_DC00(value) 0x0000(value) +#define MC_DC01(value) 0x0010(value) +#define MC_DC02(value) 0x0020(value) +#define MC_DC03(value) 0x0030(value) +#define MC_DC04(value) 0x0040(value) +#define MC_DC05(value) 0x0050(value) +#define MC_DC06(value) 0x0060(value) +#define MC_DC07(value) 0x0070(value) +#define MC_DC08(value) 0x0080(value) +#define MC_DC09(value) 0x0090(value) +#define MC_DC10(value) 0x00A0(value) +#define MC_DC11(value) 0x00B0(value) +#define MC_DC12(value) 0x00C0(value) +#define MC_DC13(value) 0x00D0(value) +#define MC_DC14(value) 0x00E0(value) +#define MC_DC15(value) 0x00F0(value) +#define MC_DC16(value) 0x0100(value) +#define MC_DC17(value) 0x0110(value) +#define MC_DC18(value) 0x0120(value) +#define MC_DC19(value) 0x0130(value) +#define MC_DC20(value) 0x0140(value) +#define MC_DC21(value) 0x0150(value) +#define MC_DC22(value) 0x0160(value) +#define MC_DC23(value) 0x0170(value) +#define MC_DC24(value) 0x0180(value) +#define MC_DC25(value) 0x0190(value) +#define MC_DC26(value) 0x01A0(value) +#define MC_DC27(value) 0x01B0(value) +#define MC_DC28(value) 0x01C0(value) +#define MC_DC29(value) 0x01D0(value) +#define MC_DC30(value) 0x01E0(value) +#define MC_DC31(value) 0x01F0(value) +#define MC_DC32(value) 0x0200(value) +#define MC_DC33(value) 0x0210(value) +#define MC_DC34(value) 0x0220(value) +#define MC_DC35(value) 0x0230(value) +#define MC_DC36(value) 0x0240(value) +#define MC_DC37(value) 0x0250(value) +#define MC_DC38(value) 0x0260(value) +#define MC_DC39(value) 0x0270(value) +#define MC_DC40(value) 0x0280(value) +#define MC_DC41(value) 0x0290(value) +#define MC_DC42(value) 0x02A0(value) +#define MC_DC43(value) 0x02B0(value) +#define MC_DC44(value) 0x02C0(value) +#define MC_DC45(value) 0x02D0(value) +#define MC_DC46(value) 0x02E0(value) + +#define RCU_OFFSET 0xBF203000 +#define RCU_RST_REQ (RCU_OFFSET + 0x0010) +#define RCU_STS (RCU_OFFSET + 0x0014) + +#define CGU_OFFSET 0xBF103000 +#define PLL0_CFG (CGU_OFFSET + 0x0004) +#define PLL1_CFG (CGU_OFFSET + 0x0008) +#define PLL2_CFG (CGU_OFFSET + 0x000C) +#define CGU_SYS (CGU_OFFSET + 0x0010) +#define CGU_UPDATE (CGU_OFFSET + 0x0014) +#define IF_CLK (CGU_OFFSET + 0x0018) +#define CGU_SMD (CGU_OFFSET + 0x0020) +#define CGU_CT1SR (CGU_OFFSET + 0x0028) +#define CGU_CT2SR (CGU_OFFSET + 0x002C) +#define CGU_PCMCR (CGU_OFFSET + 0x0030) +#define PCI_CR_PCI (CGU_OFFSET + 0x0034) +#define CGU_OSC_CTRL (CGU_OFFSET + 0x001C) +#define CGU_MIPS_PWR_DWN (CGU_OFFSET + 0x0038) +#define CLK_MEASURE (CGU_OFFSET + 0x003C) + +//05252006 +#define pll0_35MHz_CONFIG 0x9D861059 +#define pll1_35MHz_CONFIG 0x1A260CD9 +#define pll2_35MHz_CONFIG 0x8000f1e5 +#define pll0_36MHz_CONFIG 0x1000125D +#define pll1_36MHz_CONFIG 0x1B1E0C99 +#define pll2_36MHz_CONFIG 0x8002f2a1 +//05252006 + +//06063001-joelin disable the PCI CFRAME mask -start +/*CFRAME is an I/O signal, in the chip, the output CFRAME is selected via GPIO altsel pins, so if you select MII1 RXD1, the CFRAME will not come out. +But the CFRAME input still take the signal from the pad and not disabled when altsel choose other function. So when MII1_RXD1 is low from other device, the EBU interface will be disabled. + +The chip function in such a way that disable the CFRAME mask mean EBU not longer check CFRAME to be the device using the bus. +The side effect is the entire PCI block will see CFRAME low all the time meaning PCI cannot use the bus at all so no more PCI function. +*/ +#define PCI_CR_PR_OFFSET 0xBE105400 +#define PCI_CR_PCI_MOD_REG (PCI_CR_PR_OFFSET + 0x0030) +#define PCI_CONFIG_SPACE 0xB7000000 +#define CS_CFM (PCI_CONFIG_SPACE + 0x6C) +//06063001-joelin disable the PCI CFRAME mask -end + .set noreorder + + +/* + * void ebu_init(void) + */ + .globl ebu_init + .ent ebu_init +ebu_init: + +#if defined(CONFIG_EBU_ADDSEL0) || defined(CONFIG_EBU_ADDSEL1) || \ + defined(CONFIG_EBU_ADDSEL2) || defined(CONFIG_EBU_ADDSEL3) || \ + defined(CONFIG_EBU_BUSCON0) || defined(CONFIG_EBU_BUSCON1) || \ + defined(CONFIG_EBU_BUSCON2) || defined(CONFIG_EBU_BUSCON3) + + li t1, EBU_MODUL_BASE +#if defined(CONFIG_EBU_ADDSEL0) + li t2, CONFIG_EBU_ADDSEL0 + sw t2, EBU_ADDSEL0(t1) +#endif +#if defined(CONFIG_EBU_ADDSEL1) + li t2, CONFIG_EBU_ADDSEL1 + sw t2, EBU_ADDSEL1(t1) +#endif +#if defined(CONFIG_EBU_ADDSEL2) + li t2, CONFIG_EBU_ADDSEL2 + sw t2, EBU_ADDSEL2(t1) +#endif +#if defined(CONFIG_EBU_ADDSEL3) + li t2, CONFIG_EBU_ADDSEL3 + sw t2, EBU_ADDSEL3(t1) +#endif + +#if defined(CONFIG_EBU_BUSCON0) + li t2, CONFIG_EBU_BUSCON0 + sw t2, EBU_BUSCON0(t1) +#endif +#if defined(CONFIG_EBU_BUSCON1) + li t2, CONFIG_EBU_BUSCON1 + sw t2, EBU_BUSCON1(t1) +#endif +#if defined(CONFIG_EBU_BUSCON2) + li t2, CONFIG_EBU_BUSCON2 + sw t2, EBU_BUSCON2(t1) +#endif +#if defined(CONFIG_EBU_BUSCON3) + li t2, CONFIG_EBU_BUSCON3 + sw t2, EBU_BUSCON3(t1) +#endif + +#endif + + j ra + nop + + .end ebu_init + + +/* + * void cgu_init(long) + * + * a0 has the clock value + */ + .globl cgu_init + .ent cgu_init +cgu_init: + li t2, CGU_SYS + lw t2,0(t2) + beq t2,a0,freq_up2date + nop + + li t2, RCU_STS + lw t2, 0(t2) + and t2,0x00020000 + beq t2,0x00020000,boot_36MHZ + nop +//05252006 + li t1, PLL0_CFG + li t2, pll0_35MHz_CONFIG + sw t2,0(t1) + li t1, PLL1_CFG + li t2, pll1_35MHz_CONFIG + sw t2,0(t1) + li t1, PLL2_CFG + li t2, pll2_35MHz_CONFIG + sw t2,0(t1) + li t1, CGU_SYS + sw a0,0(t1) + li t1, RCU_RST_REQ + li t2, 0x40000008 + sw t2,0(t1) + b wait_reset + nop +boot_36MHZ: + li t1, PLL0_CFG + li t2, pll0_36MHz_CONFIG + sw t2,0(t1) + li t1, PLL1_CFG + li t2, pll1_36MHz_CONFIG + sw t2,0(t1) + li t1, PLL2_CFG + li t2, pll2_36MHz_CONFIG + sw t2,0(t1) + li t1, CGU_SYS + sw a0,0(t1) + li t1, RCU_RST_REQ + li t2, 0x40000008 + sw t2,0(t1) +//05252006 + +wait_reset: + b wait_reset + nop +freq_up2date: + j ra + nop + + .end cgu_init + +#ifndef CONFIG_USE_DDR_RAM +/* + * void sdram_init(long) + * + * a0 has the clock value + */ + .globl sdram_init + .ent sdram_init +sdram_init: + + /* SDRAM Initialization + */ + li t1, MC_MODUL_BASE + + /* Clear Error log registers */ + sw zero, MC_ERRCAUSE(t1) + sw zero, MC_ERRADDR(t1) + + /* Enable SDRAM module in memory controller */ + li t3, MC_SDRAM_ENABLE + lw t2, MC_CON(t1) + or t3, t2, t3 + sw t3, MC_CON(t1) + + li t1, MC_SDR_MODUL_BASE + + /* disable the controller */ + li t2, 0 + sw t2, MC_CTRLENA(t1) + + li t2, 0x822 + sw t2, MC_IOGP(t1) + + li t2, 0x2 + sw t2, MC_CFGDW(t1) + + /* Set CAS Latency */ + li t2, 0x00000020 + sw t2, MC_MRSCODE(t1) + + /* Set CS0 to SDRAM parameters */ + li t2, 0x000014d8 + sw t2, MC_CFGPB0(t1) + + /* Set SDRAM latency parameters */ + li t2, 0x00036325; /* BC PC100 */ + sw t2, MC_LATENCY(t1) + + /* Set SDRAM refresh rate */ + li t2, 0x00000C30 + sw t2, MC_TREFRESH(t1) + + /* Clear Power-down registers */ + sw zero, MC_SELFRFSH(t1) + + /* Finally enable the controller */ + li t2, 1 + sw t2, MC_CTRLENA(t1) + + j ra + nop + + .end sdram_init + +#endif /* !CONFIG_USE_DDR_RAM */ + +#ifdef CONFIG_USE_DDR_RAM +/* + * void ddrram_init(long) + * + * a0 has the clock value + */ + .globl ddrram_init + .ent ddrram_init +ddrram_init: + + /* DDR-DRAM Initialization + */ + li t1, MC_MODUL_BASE + + /* Clear Error log registers */ + sw zero, MC_ERRCAUSE(t1) + sw zero, MC_ERRADDR(t1) + + /* Enable DDR module in memory controller */ + li t3, MC_DDRRAM_ENABLE + lw t2, MC_CON(t1) + or t3, t2, t3 + sw t3, MC_CON(t1) + + li t1, MC_DDR_MODUL_BASE + + /* Write configuration to DDR controller registers */ + li t2, MC_DC0_VALUE + sw t2, MC_DC00(t1) + + li t2, MC_DC1_VALUE + sw t2, MC_DC01(t1) + + li t2, MC_DC2_VALUE + sw t2, MC_DC02(t1) + + li t2, MC_DC3_VALUE + sw t2, MC_DC03(t1) + + li t2, MC_DC4_VALUE + sw t2, MC_DC04(t1) + + li t2, MC_DC5_VALUE + sw t2, MC_DC05(t1) + + li t2, MC_DC6_VALUE + sw t2, MC_DC06(t1) + + li t2, MC_DC7_VALUE + sw t2, MC_DC07(t1) + + li t2, MC_DC8_VALUE + sw t2, MC_DC08(t1) + + li t2, MC_DC9_VALUE + sw t2, MC_DC09(t1) + + li t2, MC_DC10_VALUE + sw t2, MC_DC10(t1) + + li t2, MC_DC11_VALUE + sw t2, MC_DC11(t1) + + li t2, MC_DC12_VALUE + sw t2, MC_DC12(t1) + + li t2, MC_DC13_VALUE + sw t2, MC_DC13(t1) + + li t2, MC_DC14_VALUE + sw t2, MC_DC14(t1) + + li t2, MC_DC15_VALUE + sw t2, MC_DC15(t1) + + li t2, MC_DC16_VALUE + sw t2, MC_DC16(t1) + + li t2, MC_DC17_VALUE + sw t2, MC_DC17(t1) + + li t2, MC_DC18_VALUE + sw t2, MC_DC18(t1) + + li t2, MC_DC19_VALUE + sw t2, MC_DC19(t1) + + li t2, MC_DC20_VALUE + sw t2, MC_DC20(t1) + + li t2, MC_DC21_VALUE + sw t2, MC_DC21(t1) + + li t2, MC_DC22_VALUE + sw t2, MC_DC22(t1) + + li t2, MC_DC23_VALUE + sw t2, MC_DC23(t1) + + li t2, MC_DC24_VALUE + sw t2, MC_DC24(t1) + + li t2, MC_DC25_VALUE + sw t2, MC_DC25(t1) + + li t2, MC_DC26_VALUE + sw t2, MC_DC26(t1) + + li t2, MC_DC27_VALUE + sw t2, MC_DC27(t1) + + li t2, MC_DC28_VALUE + sw t2, MC_DC28(t1) + + li t2, MC_DC29_VALUE + sw t2, MC_DC29(t1) + + li t2, MC_DC30_VALUE + sw t2, MC_DC30(t1) + + li t2, MC_DC31_VALUE + sw t2, MC_DC31(t1) + + li t2, MC_DC32_VALUE + sw t2, MC_DC32(t1) + + li t2, MC_DC33_VALUE + sw t2, MC_DC33(t1) + + li t2, MC_DC34_VALUE + sw t2, MC_DC34(t1) + + li t2, MC_DC35_VALUE + sw t2, MC_DC35(t1) + + li t2, MC_DC36_VALUE + sw t2, MC_DC36(t1) + + li t2, MC_DC37_VALUE + sw t2, MC_DC37(t1) + + li t2, MC_DC38_VALUE + sw t2, MC_DC38(t1) + + li t2, MC_DC39_VALUE + sw t2, MC_DC39(t1) + + li t2, MC_DC40_VALUE + sw t2, MC_DC40(t1) + + li t2, MC_DC41_VALUE + sw t2, MC_DC41(t1) + + li t2, MC_DC42_VALUE + sw t2, MC_DC42(t1) + + li t2, MC_DC43_VALUE + sw t2, MC_DC43(t1) + + li t2, MC_DC44_VALUE + sw t2, MC_DC44(t1) + + li t2, MC_DC45_VALUE + sw t2, MC_DC45(t1) + + li t2, MC_DC46_VALUE + sw t2, MC_DC46(t1) + + li t2, 0x00000100 + sw t2, MC_DC03(t1) + + j ra + nop + + .end ddrram_init +#endif /* CONFIG_USE_DDR_RAM */ + + .globl lowlevel_init + .ent lowlevel_init +lowlevel_init: + /* EBU, CGU and SDRAM/DDR-RAM Initialization. + */ + move t0, ra + /* We rely on the fact that non of the following ..._init() functions + * modify t0 + */ +#if defined(CONFIG_SYS_EBU_BOOT) +#if defined(DDR166) + /* 0xe8 means CPU0/CPU1 333M, DDR 167M, FPI 83M, PPE 240M */ + li a0,0xe8 +#elif defined(DDR133) + /* 0xe9 means CPU0/CPU1 333M, DDR 133M, FPI 83M, PPE 240M */ + li a0,0xe9 +#else /* defined(DDR111) */ + /* 0xea means CPU0/CPU1 333M, DDR 111M, FPI 83M, PPE 240M */ + li a0,0xea +#endif + bal cgu_init + nop +#endif /* CONFIG_SYS_EBU_BOOT */ + + bal ebu_init + nop + +//06063001-joelin disable the PCI CFRAME mask-start +#ifdef DISABLE_CFRAME + li t1, PCI_CR_PCI //mw bf103034 80000000 + li t2, 0x80000000 + sw t2,0(t1) + + li t1, PCI_CR_PCI_MOD_REG //mw be105430 103 + li t2, 0x103 + sw t2,0(t1) + + li t1, CS_CFM //mw b700006c 0 + li t2, 0x00 + sw t2, 0(t1) + + li t1, PCI_CR_PCI_MOD_REG //mw be105430 103 + li t2, 0x1000103 + sw t2, 0(t1) +#endif +//06063001-joelin disable the PCI CFRAME mask-end + +#ifdef CONFIG_SYS_EBU_BOOT +#ifndef CONFIG_SYS_RAMBOOT +#ifdef CONFIG_USE_DDR_RAM + bal ddrram_init + nop +#else + bal sdram_init + nop +#endif +#endif /* CONFIG_SYS_RAMBOOT */ +#endif /* CONFIG_SYS_EBU_BOOT */ + + move ra, t0 + j ra + nop + + .end lowlevel_init diff --git a/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/pmuenable.S b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/pmuenable.S new file mode 100644 index 000000000..e0d7971d8 --- /dev/null +++ b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/pmuenable.S @@ -0,0 +1,48 @@ +/* + * Power Management unit initialization code for AMAZON development board. + * + * Copyright (c) 2003 Ou Ke, Infineon. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> +#include <asm/regdef.h> + +#define PMU_PWDCR 0xBF10201C +#define PMU_SR 0xBF102020 + + .globl pmuenable + +pmuenable: + li t0, PMU_PWDCR + li t1, 0x2 /* enable everything */ + sw t1, 0(t0) +#if 0 +1: + li t0, PMU_SR + lw t2, 0(t0) + bne t1, t2, 1b + nop +#endif + j ra + nop + + diff --git a/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/u-boot.lds b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/u-boot.lds new file mode 100644 index 000000000..9a6cd1b8a --- /dev/null +++ b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/u-boot.lds @@ -0,0 +1,70 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk Engineering, <wd@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* +OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips") +*/ +OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradbigmips") +OUTPUT_ARCH(mips) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + *(.text) + } + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } + + . = ALIGN(4); + .data : { *(.data) } + + . = .; + _gp = ALIGN(16) + 0x7ff0; + + .got : { + __got_start = .; + *(.got) + __got_end = .; + } + + .sdata : { *(.sdata) } + + .u_boot_cmd : { + __u_boot_cmd_start = .; + *(.u_boot_cmd) + __u_boot_cmd_end = .; + } + + uboot_end_data = .; + num_got_entries = (__got_end - __got_start) >> 2; + + . = ALIGN(4); + .sbss (NOLOAD) : { *(.sbss) } + .bss (NOLOAD) : { *(.bss) . = ALIGN(4); } + uboot_end = .; +} diff --git a/package/uboot-lantiq/files/include/configs/arv4518.h b/package/uboot-lantiq/files/include/configs/arv4518.h new file mode 100644 index 000000000..c4a9842c7 --- /dev/null +++ b/package/uboot-lantiq/files/include/configs/arv4518.h @@ -0,0 +1,152 @@ +/* + * (C) Copyright 2003-2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * This file contains the configuration parameters for the Danube reference board. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* #define DEBUG */ + +#define CONFIG_MIPS32 1 /* MIPS32 CPU compatible */ +#define CONFIG_MIPS24KEC 1 /* MIPS 24KEc CPU core */ +#define CONFIG_DANUBE 1 /* in a Danube/Twinpass Chip */ +#define CONFIG_ARV4518 1 /* on the arv4518 Board */ + +#define CONFIG_SYS_MIPS_MULTI_CPU 1 /* This is a multi cpu system */ + +#define CONFIG_USE_DDR_RAM +#define CONFIG_SYS_MAX_RAM 64*1024*1024 + +#define CONFIG_FLASH_CFI_DRIVER 1 + +#define CONFIG_SYS_INIT_RAM_LOCK_MIPS + +#ifdef CONFIG_SYS_RAMBOOT + //#warning CONFIG_SYS_RAMBOOT + #define CONFIG_SKIP_LOWLEVEL_INIT +#else /* CONFIG_SYS_RAMBOOT */ + #define CONFIG_SYS_EBU_BOOT + #define INFINEON_EBU_BOOTCFG 0x688C688C /* CMULT = 8 for 150 MHz */ +#endif /* CONFIG_SYS_RAMBOOT */ + +#if 1 +#ifndef CPU_CLOCK_RATE +#define CPU_CLOCK_RATE (ifx_get_cpuclk()) +#endif +#endif + +#define CONFIG_SYS_PROMPT "ARV4518 => " /* Monitor Command Prompt */ + +#undef CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ + +/* + * Include common defines/options for all Infineon boards + */ +#include "ifx-common.h" + + +#undef CONFIG_EXTRA_ENV_SETTINGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ram_addr=0x80500000\0" \ + "kernel_addr=0xb0050000\0" \ + "mtdparts=mtdparts=ifx-nor:256k(uboot)ro,64k(uboot_env)ro,64k(kernel),-(rootfs)\0" \ + "flashargs=setenv bootargs rootfstype=squashfs,jffs2\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath} \0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off\0" \ + "addmisc=setenv bootargs ${bootargs} init=/etc/preinit " \ + "console=ttyS1,115200 ethaddr=${ethaddr} " \ + "${mtdparts}\0" \ + "flash_flash=run flashargs addip addmisc;" \ + "bootm ${kernel_addr}\0" \ + "flash_nfs=run nfsargs addip addmisc;bootm ${kernel_addr}\0" \ + "net_flash=run load_kernel flashargs addip addmisc;" \ + "bootm ${ram_addr}\0" \ + "net_nfs=run load_kernel nfsargs addip addmisc;" \ + "bootm ${ram_addr}\0" \ + "load_kernel=tftp ${ram_addr} " \ + "${tftppath}openwrt-ifxmips-uImage\0" \ + "update_uboot=tftp 0x80500000 ${tftppath}u-boot.bin;era 0xb0000000 +${filesize};" \ + "cp.b 0x80500000 0xb0000000 ${filesize}\0" \ + "update_openwrt=tftp ${ram_addr} " \ + "${tftppath}openwrt-ifxmips-squashfs.image;" \ + "era ${kernel_addr} +${filesize};" \ + "cp.b ${ram_addr} ${kernel_addr} ${filesize}\0" + +/* + * Cache Configuration (cpu/chip specific, Danube) + */ +#define CONFIG_SYS_DCACHE_SIZE 16384 +#define CONFIG_SYS_ICACHE_SIZE 16384 +#define CONFIG_SYS_CACHELINE_SIZE 32 +#define CONFIG_SYS_MIPS_CACHE_OPER_MODE CONF_CM_CACHABLE_NO_WA + +#define CONFIG_NET_MULTI +#if 0 +#define CONFIG_M4530_ETH +#define CONFIG_M4530_FPGA +#endif + +#define CONFIG_IFX_ETOP +//#define CLK_OUT2_25MHZ +#define CONFIG_EXTRA_SWITCH + +//#define CONFIG_RMII /* use interface in RMII mode */ + +#define CONFIG_MII +#define CONFIG_CMD_MII + +#define CONFIG_IFX_ASC + +#ifdef CONFIG_USE_ASC0 +#define CONFIG_SYS_IFX_ASC_BASE 0x1E100400 +#else +#define CONFIG_SYS_IFX_ASC_BASE 0x1E100C00 +#endif + +#ifdef CONFIG_SYS_RAMBOOT +/* Configuration of EBU: */ +/* starting address from 0xb0000000 */ +/* make the flash available from RAM boot */ +# define CONFIG_EBU_ADDSEL0 0x10000031 +# define CONFIG_EBU_BUSCON0 0x0001D7FF +# define CONFIG_EBU_ADDSEL1 0x14000001 +# define CONFIG_EBU_BUSCON1 0x4041D7FD +#endif + +#define CONFIG_CMD_HTTPD /* enable upgrade via HTTPD */ + +//#define CONFIG_ETHADDR 00:13:f7:df:1c:80 +//#define CONFIG_ETHADDR 11:22:33:44:55:66 +#define CONFIG_IPADDR 192.168.2.1 +#define CONFIG_SERVERIP 192.168.2.101 +#define CONFIG_GATEWAYIP 192.168.2.254 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_ROOTPATH "/export" + +#endif /* __CONFIG_H */ diff --git a/package/uboot-lantiq/files/include/configs/arv752DWP22.h b/package/uboot-lantiq/files/include/configs/arv752DWP22.h new file mode 100644 index 000000000..386a2380c --- /dev/null +++ b/package/uboot-lantiq/files/include/configs/arv752DWP22.h @@ -0,0 +1,152 @@ +/* + * (C) Copyright 2003-2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * This file contains the configuration parameters for the Danube reference board. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* #define DEBUG */ + +#define CONFIG_MIPS32 1 /* MIPS32 CPU compatible */ +#define CONFIG_MIPS24KEC 1 /* MIPS 24KEc CPU core */ +#define CONFIG_DANUBE 1 /* in a Danube/Twinpass Chip */ +#define CONFIG_ARV752DWP22 1 /* on the arv752DWP22 Board */ + +#define CONFIG_SYS_MIPS_MULTI_CPU 1 /* This is a multi cpu system */ + +#define CONFIG_USE_DDR_RAM +#define CONFIG_SYS_MAX_RAM 64*1024*1024 + +#define CONFIG_FLASH_CFI_DRIVER 1 + +#define CONFIG_SYS_INIT_RAM_LOCK_MIPS + +#ifdef CONFIG_SYS_RAMBOOT + //#warning CONFIG_SYS_RAMBOOT + #define CONFIG_SKIP_LOWLEVEL_INIT +#else /* CONFIG_SYS_RAMBOOT */ + #define CONFIG_SYS_EBU_BOOT + #define INFINEON_EBU_BOOTCFG 0x688C688C /* CMULT = 8 for 150 MHz */ +#endif /* CONFIG_SYS_RAMBOOT */ + +#if 1 +#ifndef CPU_CLOCK_RATE +#define CPU_CLOCK_RATE (ifx_get_cpuclk()) +#endif +#endif + +#define CONFIG_SYS_PROMPT "ARV752DWP22 => " /* Monitor Command Prompt */ + +#undef CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ + +/* + * Include common defines/options for all Infineon boards + */ +#include "ifx-common.h" + + +#undef CONFIG_EXTRA_ENV_SETTINGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ram_addr=0x80500000\0" \ + "kernel_addr=0xb0050000\0" \ + "mtdparts=mtdparts=ifx-nor:256k(uboot)ro,64k(uboot_env)ro,64k(kernel),-(rootfs)\0" \ + "flashargs=setenv bootargs rootfstype=squashfs,jffs2\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath} \0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off\0" \ + "addmisc=setenv bootargs ${bootargs} init=/etc/preinit " \ + "console=ttyS1,115200 ethaddr=${ethaddr} " \ + "${mtdparts}\0" \ + "flash_flash=run flashargs addip addmisc;" \ + "bootm ${kernel_addr}\0" \ + "flash_nfs=run nfsargs addip addmisc;bootm ${kernel_addr}\0" \ + "net_flash=run load_kernel flashargs addip addmisc;" \ + "bootm ${ram_addr}\0" \ + "net_nfs=run load_kernel nfsargs addip addmisc;" \ + "bootm ${ram_addr}\0" \ + "load_kernel=tftp ${ram_addr} " \ + "${tftppath}openwrt-ifxmips-uImage\0" \ + "update_uboot=tftp 0x80500000 ${tftppath}u-boot.bin;era 0xb0000000 +${filesize};" \ + "cp.b 0x80500000 0xb0000000 ${filesize}\0" \ + "update_openwrt=tftp ${ram_addr} " \ + "${tftppath}openwrt-ifxmips-squashfs.image;" \ + "era ${kernel_addr} +${filesize};" \ + "cp.b ${ram_addr} ${kernel_addr} ${filesize}\0" + +/* + * Cache Configuration (cpu/chip specific, Danube) + */ +#define CONFIG_SYS_DCACHE_SIZE 16384 +#define CONFIG_SYS_ICACHE_SIZE 16384 +#define CONFIG_SYS_CACHELINE_SIZE 32 +#define CONFIG_SYS_MIPS_CACHE_OPER_MODE CONF_CM_CACHABLE_NO_WA + +#define CONFIG_NET_MULTI +#if 0 +#define CONFIG_M4530_ETH +#define CONFIG_M4530_FPGA +#endif + +#define CONFIG_IFX_ETOP +//#define CLK_OUT2_25MHZ +#define CONFIG_EXTRA_SWITCH + +//#define CONFIG_RMII /* use interface in RMII mode */ + +#define CONFIG_MII +#define CONFIG_CMD_MII + +#define CONFIG_IFX_ASC + +#ifdef CONFIG_USE_ASC0 +#define CONFIG_SYS_IFX_ASC_BASE 0x1E100400 +#else +#define CONFIG_SYS_IFX_ASC_BASE 0x1E100C00 +#endif + +#ifdef CONFIG_SYS_RAMBOOT +/* Configuration of EBU: */ +/* starting address from 0xb0000000 */ +/* make the flash available from RAM boot */ +# define CONFIG_EBU_ADDSEL0 0x10000031 +# define CONFIG_EBU_BUSCON0 0x0001D7FF +# define CONFIG_EBU_ADDSEL1 0x14000001 +# define CONFIG_EBU_BUSCON1 0x4041D7FD +#endif + +#define CONFIG_CMD_HTTPD /* enable upgrade via HTTPD */ + +//#define CONFIG_ETHADDR 00:13:f7:df:1c:80 +//#define CONFIG_ETHADDR 11:22:33:44:55:66 +#define CONFIG_IPADDR 192.168.2.1 +#define CONFIG_SERVERIP 192.168.2.101 +#define CONFIG_GATEWAYIP 192.168.2.254 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_ROOTPATH "/export" + +#endif /* __CONFIG_H */ diff --git a/package/uboot-lantiq/patches/500-arcadyan.patch b/package/uboot-lantiq/patches/500-arcadyan.patch new file mode 100644 index 000000000..eedd91c7e --- /dev/null +++ b/package/uboot-lantiq/patches/500-arcadyan.patch @@ -0,0 +1,102 @@ +--- a/common/Makefile ++++ b/common/Makefile +@@ -127,7 +127,9 @@ + ifdef CONFIG_PCI + COBJS-$(CONFIG_CMD_PCI) += cmd_pci.o + endif ++ifdef CONFIG_CMD_PCMCIA + COBJS-y += cmd_pcmcia.o ++endif + COBJS-$(CONFIG_CMD_PORTIO) += cmd_portio.o + COBJS-$(CONFIG_CMD_REGINFO) += cmd_reginfo.o + COBJS-$(CONFIG_CMD_REISER) += cmd_reiser.o +--- a/drivers/pcmcia/Makefile ++++ b/drivers/pcmcia/Makefile +@@ -28,9 +28,11 @@ + COBJS-$(CONFIG_I82365) += i82365.o + COBJS-$(CONFIG_8xx) += mpc8xx_pcmcia.o + COBJS-$(CONFIG_PXA_PCMCIA) += pxa_pcmcia.o +-COBJS-y += rpx_pcmcia.o ++#COBJS-y += rpx_pcmcia.o ++COBJS-$(CONFIG_RPX_PCMCIA) += rpx_pcmcia.o + COBJS-$(CONFIG_IDE_TI_CARDBUS) += ti_pci1410a.o +-COBJS-y += tqm8xx_pcmcia.o ++#COBJS-y += tqm8xx_pcmcia.o ++COBJS-$(CONFIG_TQM8XX_PCMCIA) += tqm8xx_pcmcia.o + COBJS-$(CONFIG_MARUBUN_PCCARD) += marubun_pcmcia.o + + COBJS := $(COBJS-y) +--- a/drivers/usb/phy/Makefile ++++ b/drivers/usb/phy/Makefile +@@ -23,7 +23,7 @@ + LIB := $(obj)libusb_phy.a + + COBJS-$(CONFIG_TWL4030_USB) += twl4030.o +-COBJS-y := twl4030.o ++#COBJS-y := twl4030.o + + COBJS := $(COBJS-y) + SRCS := $(COBJS:.o=.c) +--- a/Makefile ++++ b/Makefile +@@ -3414,6 +3414,46 @@ + ## MIPS32 ifxcpe + ######################################################################### + ++arv752DWP22%config : unconfig ++ @mkdir -p $(obj)include ++ @mkdir -p $(obj)board/arcadyan/arv752DWP22 ++ @[ -z "$(findstring brnboot,$@)" ] || \ ++ { echo "TEXT_BASE = 0x80002000" >$(obj)board/arcadyan/arv752DWP22/config.tmp ; \ ++ echo "#define CONFIG_SYS_RAMBOOT" >>$(obj)include/config.h ; \ ++ echo "#define CONFIG_SYS_BRNBOOT" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with brnboot configuration" ; \ ++ } ++ @[ -z "$(findstring ramboot,$@)" ] || \ ++ { echo "TEXT_BASE = 0xA0400000" >$(obj)board/arcadyan/arv752DWP22/config.tmp ; \ ++ echo "#define CONFIG_SYS_RAMBOOT" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with ramboot configuration" ; \ ++ } ++ @if [ "$(findstring flash,$@)" ] ; then \ ++ echo "#define CONFIG_USE_DDR_RAM" >>$(obj)include/config.h ; \ ++ echo "#define CONFIG_USE_DDR_RAM_CFG_DDR_psc166" >>$(obj)include/config.h ; \ ++ fi ++ @$(MKCONFIG) -a $(word 1,$(subst _, ,$@)) mips mips arv752DWP22 arcadyan danube ++ ++arv4518%config : unconfig ++ @mkdir -p $(obj)include ++ @mkdir -p $(obj)board/arcadyan/arv4518 ++ @[ -z "$(findstring brnboot,$@)" ] || \ ++ { echo "TEXT_BASE = 0x80002000" >$(obj)board/arcadyan/arv4518/config.tmp ; \ ++ echo "#define CONFIG_SYS_RAMBOOT" >>$(obj)include/config.h ; \ ++ echo "#define CONFIG_SYS_BRNBOOT" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with brnboot configuration" ; \ ++ } ++ @[ -z "$(findstring ramboot,$@)" ] || \ ++ { echo "TEXT_BASE = 0xA0400000" >$(obj)board/arcadyan/arv4518/config.tmp ; \ ++ echo "#define CONFIG_SYS_RAMBOOT" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with ramboot configuration" ; \ ++ } ++ @if [ "$(findstring flash,$@)" ] ; then \ ++ echo "#define CONFIG_USE_DDR_RAM" >>$(obj)include/config.h ; \ ++ echo "#define CONFIG_USE_DDR_RAM_CFG_DDR_psc166" >>$(obj)include/config.h ; \ ++ fi ++ @$(MKCONFIG) -a $(word 1,$(subst _, ,$@)) mips mips arv4518 arcadyan danube ++ + easy50712%config : unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)board/infineon/easy50712 +--- a/net/tftp.c ++++ b/net/tftp.c +@@ -11,9 +11,9 @@ + #include "bootp.h" + + #define WELL_KNOWN_PORT 69 /* Well known TFTP port # */ +-#define TIMEOUT 5000UL /* Millisecs to timeout for lost pkt */ ++#define TIMEOUT 10000UL /* Millisecs to timeout for lost pkt */ + #ifndef CONFIG_NET_RETRY_COUNT +-# define TIMEOUT_COUNT 10 /* # of timeouts before giving up */ ++# define TIMEOUT_COUNT 200 /* # of timeouts before giving up */ + #else + # define TIMEOUT_COUNT (CONFIG_NET_RETRY_COUNT * 2) + #endif |