diff options
Diffstat (limited to 'package/uboot-lantiq/files/include/configs/easy50812.h')
| -rw-r--r-- | package/uboot-lantiq/files/include/configs/easy50812.h | 104 |
1 files changed, 0 insertions, 104 deletions
diff --git a/package/uboot-lantiq/files/include/configs/easy50812.h b/package/uboot-lantiq/files/include/configs/easy50812.h deleted file mode 100644 index c7e96c1bc..000000000 --- a/package/uboot-lantiq/files/include/configs/easy50812.h +++ /dev/null @@ -1,104 +0,0 @@ -/* - * (C) Copyright 2003-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * This file contains the configuration parameters for the Danube reference board. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* #define DEBUG */ - -#define CONFIG_MIPS32 1 /* MIPS32 CPU compatible */ -#define CONFIG_MIPS34KC 1 /* MIPS 34Kc CPU core */ -#define CONFIG_AR9 1 /* an AR9 device */ -#define CONFIG_EASY50812 1 /* on the AR9 reference board */ -#define CONFIG_SYS_MAX_RAM 32*1024*1024 /* 32 MB */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* using CFI flash driver */ - -#define CONFIG_SYS_INIT_RAM_LOCK_MIPS - -/* use PPL1 and fixed values for CPU / DDR and bus speed */ -#define CONFIG_USE_PLL1 -#define CONFIG_CPU_333M_RAM_166M -#define CONFIG_CLASS_II_DDR_PAD - -#ifdef CONFIG_SYS_RAMBOOT - #define CONFIG_SKIP_LOWLEVEL_INIT /* no cache */ -#else - #define CONFIG_SYS_EBU_BOOT - #define INFINEON_EBU_BOOTCFG 0x688C688C /* CMULT = 8 for 150 MHz */ -#endif - -#ifndef CPU_CLOCK_RATE -#define CPU_CLOCK_RATE (ifx_get_cpuclk()) -#endif - -#define CONFIG_SYS_PROMPT "AR9 => " /* Monitor Command Prompt */ -#undef CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ - -/* - * Include common defines/options for all Lantiq boards - */ -#include "ifx-common.h" - -/* - * Cache Configuration (cpu/chip specific, ar9) - */ -#define CONFIG_SYS_DCACHE_SIZE (16384) -#define CONFIG_SYS_ICACHE_SIZE (16384) -#define CONFIG_SYS_CACHELINE_SIZE (32) -#define CONFIG_SYS_MIPS_CACHE_OPER_MODE CONF_CM_CACHABLE_NO_WA - -#define CONFIG_NET_MULTI -#if 0 -#define CONFIG_M4530_ETH -#define CONFIG_M4530_FPGA -#endif - -#define CONFIG_IFX_ETOP /* lantiq ethernet cpe interface */ -#define CLK_OUT2_25MHZ -#define CONFIG_EXTRA_SWITCH /* search for external switches like tantos */ -#define CONFIG_RMII /* use interface in RMII mode */ -#define CONFIG_MII -#define CONFIG_CMD_MII /* enable MII command */ - -#define CONFIG_IFX_ASC /* use lantiq ASC driver */ -#ifdef CONFIG_USE_ASC0 -#define CONFIG_SYS_IFX_ASC_BASE 0x1E100400 -#else -#define CONFIG_SYS_IFX_ASC_BASE 0x1E100C00 -#endif - -#ifdef CONFIG_SYS_RAMBOOT -/* Configuration of EBU: */ -/* starting address from 0xb0000000 */ -/* make the flash available from RAM boot */ -# define CONFIG_EBU_ADDSEL0 0x10000031 -# define CONFIG_EBU_BUSCON0 0x0001D7FF -#endif - -#define CONFIG_CMD_HTTPD /* enable upgrade via HTTPD */ - -#endif /* __CONFIG_H */ |