summaryrefslogtreecommitdiffstats
path: root/package/uboot-lantiq/files/board
diff options
context:
space:
mode:
Diffstat (limited to 'package/uboot-lantiq/files/board')
-rw-r--r--package/uboot-lantiq/files/board/arcadyan/board.c105
1 files changed, 105 insertions, 0 deletions
diff --git a/package/uboot-lantiq/files/board/arcadyan/board.c b/package/uboot-lantiq/files/board/arcadyan/board.c
index 005efbb0e..57f460362 100644
--- a/package/uboot-lantiq/files/board/arcadyan/board.c
+++ b/package/uboot-lantiq/files/board/arcadyan/board.c
@@ -312,6 +312,107 @@ static int external_switch_rtl8306(void)
}
#endif
+#ifdef CONFIG_RTL8306G_SWITCH
+#define ID_RTL8306 0x5988
+
+static int external_switch_rtl8306G(void)
+{
+ unsigned short chipid,val;
+ int i;
+ static char * const name = "lq_cpe_eth";
+ unsigned int chipid2, chipver, chiptype;
+ char str[128];
+ int cpu_mask = 1 << 5;
+ udelay(100000);
+
+ puts("\nsearching for rtl8306 switch ... ");
+ if (miiphy_read(name, 4, 30, &chipid) == 0) {
+ if (chipid == ID_RTL8306) {
+ puts("found\nReset Hard\n");
+#ifdef CONFIG_ARV752DPW
+ //gpio 19
+ //reset reset ping to high
+ *DANUBE_GPIO_P1_DIR |= 8;
+ *DANUBE_GPIO_P1_OUT |= 8;
+ udelay(500*1000);
+ *DANUBE_GPIO_P1_OUT &= ~(8); // now low again for at least 10 ms
+ udelay(500*1000);
+ *DANUBE_GPIO_P1_OUT |= 8;
+ udelay(500*1000);
+ puts("Done\n");
+#endif
+ /* set led mode */
+
+ miiphy_write(name, 0, 0, 0x3100);
+ miiphy_write(name, 0, 18, 0x7fff);
+ miiphy_write(name, 0, 19, 0xffff);
+ miiphy_write(name, 0, 22, 0x877f);
+ miiphy_write(name, 0, 24, 0x0ed1);
+
+ miiphy_write(name, 1, 0, 0x3100);
+ miiphy_write(name, 1, 22, 0x877f);
+ miiphy_write(name, 1, 24, 0x1ed2);
+
+ miiphy_write(name, 2, 0, 0x3100);
+ miiphy_write(name, 2, 22, 0x877f);
+ miiphy_write(name, 2, 23, 0x0020);
+ miiphy_write(name, 2, 24, 0x2ed4);
+
+ miiphy_write(name, 3, 0, 0x3100);
+ miiphy_write(name, 3, 22, 0x877f);
+ miiphy_write(name, 3, 24, 0x3ed8);
+
+ miiphy_write(name, 4, 0, 0x3100);
+ miiphy_write(name, 4, 22, 0x877f);
+ miiphy_write(name, 4, 24, 0x4edf);
+
+ miiphy_write(name, 5, 0, 0x3100);
+ miiphy_write(name, 6, 0, 0x2100);
+
+ //important. enable phy 5 link status, for rmii
+ miiphy_write(name, 6, 22, 0x873f);
+
+ miiphy_write(name, 6, 24, 0x8eff);
+ //disable ports
+ for (i=0;i<5;i++) {
+ miiphy_read(name, 0, 24, &val);
+ val&=~(1<<10);
+ val&=~(1<<11);
+ miiphy_write(name, 0, 24, val);
+ }
+
+ puts("Reset Soft\n");
+ miiphy_write(name,0 ,0 ,1<<15);
+ for (i=0;i<1000;i++)
+ {
+ miiphy_read(name,0 ,0 ,&val);
+ if (!(val&1<<15))
+ break;
+ udelay(1000);
+ }
+ if (i==1000)
+ puts("Failed\n");
+ else
+ puts("Success\n");
+ //enable ports egain
+ for (i=0;i<5;i++) // enable ports
+ {
+ miiphy_read(name, 0, 24, &val);
+ val|=(1<<10);
+ val|=(1<<11);
+ miiphy_write(name, 0, 24, val);
+ }
+ puts("\n");
+ return 0;
+ }
+ puts("failed\n");
+ }
+ puts("\nno known switch found ... \n");
+
+ return 0;
+}
+#endif
+
#ifdef CONFIG_AR8216_SWITCH
static int external_switch_ar8216(void)
{
@@ -345,6 +446,10 @@ int board_eth_init(bd_t *bis)
*DANUBE_RCU_RST_REQ &=(unsigned long)~1;
udelay(1000);
+#ifdef CONFIG_RTL8306G_SWITCH
+ if (external_switch_rtl8306G()<0)
+ return -1;
+#endif
#ifdef CONFIG_RTL8306_SWITCH
if (external_switch_rtl8306()<0)
return -1;