summaryrefslogtreecommitdiffstats
path: root/package/uboot-lantiq/files/board/infineon
diff options
context:
space:
mode:
Diffstat (limited to 'package/uboot-lantiq/files/board/infineon')
-rw-r--r--package/uboot-lantiq/files/board/infineon/easy50712/danube.c51
1 files changed, 47 insertions, 4 deletions
diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/danube.c b/package/uboot-lantiq/files/board/infineon/easy50712/danube.c
index 0b33a3ad4..51b7577ed 100644
--- a/package/uboot-lantiq/files/board/infineon/easy50712/danube.c
+++ b/package/uboot-lantiq/files/board/infineon/easy50712/danube.c
@@ -180,6 +180,7 @@ int checkboard (void)
switch (part_num)
{
case 0x129:
+ case 0x12B:
case 0x12D:
puts("Danube/Twinpass/Vinax-VE ");
break;
@@ -233,6 +234,19 @@ static int external_switch_init(void)
unsigned short chipid0=0xdead, chipid1=0xbeef;
static char * const name = "lq_cpe_eth";
+#ifdef CONFIG_SWITCH_PORT0
+ *DANUBE_GPIO_P0_ALTSEL0 &= ~(1<<CONFIG_SWITCH_PIN);
+ *DANUBE_GPIO_P0_ALTSEL1 &= ~(1<<CONFIG_SWITCH_PIN);
+ *DANUBE_GPIO_P0_OD |= (1<<CONFIG_SWITCH_PIN);
+ *DANUBE_GPIO_P0_DIR |= (1<<CONFIG_SWITCH_PIN);
+ *DANUBE_GPIO_P0_OUT |= (1<<CONFIG_SWITCH_PIN);
+#elif defined(CONFIG_SWITCH_PORT1)
+ *DANUBE_GPIO_P1_ALTSEL0 &= ~(1<<CONFIG_SWITCH_PIN);
+ *DANUBE_GPIO_P1_ALTSEL1 &= ~(1<<CONFIG_SWITCH_PIN);
+ *DANUBE_GPIO_P1_OD |= (1<<CONFIG_SWITCH_PIN);
+ *DANUBE_GPIO_P1_DIR |= (1<<CONFIG_SWITCH_PIN);
+ *DANUBE_GPIO_P1_OUT |= (1<<CONFIG_SWITCH_PIN);
+#endif
#ifdef CLK_OUT2_25MHZ
*DANUBE_GPIO_P0_DIR=0x0000ae78;
*DANUBE_GPIO_P0_ALTSEL0=0x00008078;
@@ -245,12 +259,12 @@ static int external_switch_init(void)
/* earlier no valid response is available, at least on Twinpass & Tantos @ 111MHz, M4530 platform */
udelay(100000);
- debug("\nsearching for Samurai switch ... ");
+ printf("\nsearching for Samurai switch ... ");
if ( (miiphy_read(name, PHYADDR(SAMURAI_ID_REG0), &chipid0)==0) &&
(miiphy_read(name, PHYADDR(SAMURAI_ID_REG1), &chipid1)==0) ) {
if (((chipid0 & 0xFFF0) == ID_SAMURAI_0) &&
((chipid1 & 0x000F) == ID_SAMURAI_1)) {
- debug("found");
+ printf("found");
/* enable "Crossover Auto Detect" + defaults */
/* P0 */
@@ -274,10 +288,11 @@ static int external_switch_init(void)
}
}
- debug("\nsearching for TANTOS switch ... ");
+ printf("%04X %04x\n", chipid0, chipid1);
+ printf("\nsearching for TANTOS switch ... ");
if (miiphy_read(name, PHYADDR(0x101), &chipid0) == 0) {
if (chipid0 == ID_TANTOS) {
- debug("found");
+ printf("found");
/* P5 Basic Control: Force Link Up */
miiphy_write(name, PHYADDR(0xA1), 0x0004);
@@ -315,8 +330,36 @@ static int external_switch_init(void)
}
#endif /* CONFIG_EXTRA_SWITCH */
+int board_gpio_init(void)
+{
+#ifdef CONFIG_BUTTON_PORT0
+ *DANUBE_GPIO_P0_ALTSEL0 &= ~(1<<CONFIG_BUTTON_PIN);
+ *DANUBE_GPIO_P0_ALTSEL1 &= ~(1<<CONFIG_BUTTON_PIN);
+ *DANUBE_GPIO_P0_DIR &= ~(1<<CONFIG_BUTTON_PIN);
+ if(!!(*DANUBE_GPIO_P0_IN & (1<<CONFIG_BUTTON_PIN)) == CONFIG_BUTTON_LEVEL)
+ {
+ printf("button is pressed\n");
+ setenv("bootdelay", "0");
+ setenv("bootcmd", "httpd");
+ }
+#elif defined(CONFIG_BUTTON_PORT1)
+ *DANUBE_GPIO_P1_ALTSEL0 &= ~(1<<CONFIG_BUTTON_PIN);
+ *DANUBE_GPIO_P1_ALTSEL1 &= ~(1<<CONFIG_BUTTON_PIN);
+ *DANUBE_GPIO_P1_DIR &= ~(1<<CONFIG_BUTTON_PIN);
+ if(!!(*DANUBE_GPIO_P1_IN & (1<<CONFIG_BUTTON_PIN)) == CONFIG_BUTTON_LEVEL)
+ {
+ printf("button is pressed\n");
+ setenv("bootdelay", "0");
+ setenv("bootcmd", "httpd");
+ }
+#endif
+}
+
int board_eth_init(bd_t *bis)
{
+
+ board_gpio_init();
+
#if defined(CONFIG_IFX_ETOP)
*DANUBE_PMU_PWDCR &= 0xFFFFEFDF;