6 files changed, 0 insertions, 200 deletions
diff --git a/package/strongswan/files/ipsec.button b/package/strongswan/files/ipsec.button
deleted file mode 100644
index 9bd902356..000000000
--- a/package/strongswan/files/ipsec.button
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/sh
-
-# snarf the code that loads the config values
-# since we also load the functions, might as well save the shell calls
-. /etc/init.d/ipsec
-
-[ -n "$IPSEC_RESET_BUTTON" -a "$BUTTON" = "$IPSEC_RESET_BUTTON" ] || exit
-
-if [ ! -e /var/run/pluto.pid ] ; then
-
-	[ "$ACTION" = "pressed" ] && start
-	
-else
-
-	if   [ "$ACTION" = "pressed"  ] ; then
-	
-		stop 
-		
-	elif [ "$ACTION" = "released" ] ; then
-
-		while [ -e /var/run/pluto.pid ] ; do
-			sleep 1
-		done
-
-		while ps auxww | grep ipsec | grep -v grep ; do
-			sleep 1
-		done
-
-		start
-		
-	fi
-	
-fi
-
diff --git a/package/strongswan/files/ipsec.conf b/package/strongswan/files/ipsec.conf
deleted file mode 100644
index 8f5900883..000000000
--- a/package/strongswan/files/ipsec.conf
+++ /dev/null
@@ -1,34 +0,0 @@
-
-version 2.0
-
-config setup
-        interfaces=%defaultroute
-        nat_traversal=yes		# required on both ends
-        uniqueids=yes			# makes sense on client, not server
-        hidetos=no
-
-conn %default
-        authby=rsasig
-        keyingtries=3
-        keyexchange=ike
-        left=%defaultroute
-        leftrsasigkey=%cert
-        rightrsasigkey=%cert
-        dpdtimeout=30			# keepalive must arrive within
-        dpddelay=5			# secs before keepalives start
-        compress=no			# breaks double nat installations
-        pfs=yes
-
-conn sample
-        leftca=%same
-        leftcert=my.certificate.crt
-        leftsourceip=192.168.10.1
-        leftsubnet=192.168.10.0/24
-        right=my.vpn.concentrator.net.
-        rightca=%same
-        rightid="C=??, ST=??, O=??, OU=??, CN=my.vpn.concentrator.net, E=root@concentrator.net"
-        rightsourceip=192.168.11.1
-        rightsubnet=192.168.11.0/24
-        dpdaction=hold
-        auto=start
-
diff --git a/package/strongswan/files/ipsec.config b/package/strongswan/files/ipsec.config
deleted file mode 100644
index b4865e40b..000000000
--- a/package/strongswan/files/ipsec.config
+++ /dev/null
@@ -1,21 +0,0 @@
-
-# Configure button/light behavior here.
-config device
-	option reset_button	ses
-	option status_start	ses_orange
-	option status_valid	ses_white
-
-# iptables setup for traffic to/from this host
-config filter
-	option rule_in		input_rule
-	option dest_in		ACCEPT
-	option rule_out		output_rule
-	option dest_out		ACCEPT
-
-# iptables setup for traffic to/from another host
-config forward
-	option rule_in		forwarding_rule
-	option dest_in		forwarding_vpn_in
-	option rule_out		forwarding_rule
-	option dest_out		forwarding_vpn_out
-
diff --git a/package/strongswan/files/ipsec.cron b/package/strongswan/files/ipsec.cron
deleted file mode 100644
index d8c7dccfa..000000000
--- a/package/strongswan/files/ipsec.cron
+++ /dev/null
@@ -1,2 +0,0 @@
-#!/bin/sh
-/usr/sbin/ipsec wakeup
diff --git a/package/strongswan/files/ipsec.iface b/package/strongswan/files/ipsec.iface
deleted file mode 100644
index 0716bf79b..000000000
--- a/package/strongswan/files/ipsec.iface
+++ /dev/null
@@ -1,8 +0,0 @@
-NAME=ipsec
-CTLFILE="/var/run/pluto.ctl"
-
-[ "$ACTION" = "ifup" -a "$INTERFACE" = "wan" ] || exit
-
-[ -e "$CTLFILE" ] || exit
-
-/etc/init.d/ipsec update
diff --git a/package/strongswan/files/ipsec.init b/package/strongswan/files/ipsec.init
deleted file mode 100644
index 4e8b8a216..000000000
--- a/package/strongswan/files/ipsec.init
+++ /dev/null
@@ -1,101 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=65
-
-config_cb() {
-	local cfg="$CONFIG_SECTION"
-	local cfgt
-	config_get cfgt "$cfg" TYPE
-
-	case "$cfgt" in
-		device)
-			config_get IPSEC_RESET_BUTTON		$cfg reset_button
-			config_get IPSEC_STATUS_LED_START	$cfg status_start
-			config_get IPSEC_STATUS_LED_VALID	$cfg status_valid
-			;;
-		filter)
-			config_get IPSEC_UPDOWN_RULE_IN		$cfg rule_in
-			config_get IPSEC_UPDOWN_DEST_IN		$cfg dest_in
-			config_get IPSEC_UPDOWN_RULE_OUT	$cfg rule_out
-			config_get IPSEC_UPDOWN_DEST_OUT	$cfg dest_out
-			;;
-		forward)
-			config_get IPSEC_UPDOWN_FWD_RULE_IN	$cfg rule_in
-			config_get IPSEC_UPDOWN_FWD_DEST_IN	$cfg dest_in
-			config_get IPSEC_UPDOWN_FWD_RULE_OUT	$cfg rule_out
-			config_get IPSEC_UPDOWN_FWD_DEST_OUT	$cfg dest_out
-			;;
-		*)
-			;;
-	esac
-}
-
-config_load ipsec
-
-export IPSEC_RESET_BUTTON
-export IPSEC_STATUS_LED_START
-export IPSEC_STATUS_LED_VALID
-
-export IPSEC_UPDOWN_RULE_IN
-export IPSEC_UPDOWN_DEST_IN
-export IPSEC_UPDOWN_RULE_OUT
-export IPSEC_UPDOWN_DEST_OUT
-
-export IPSEC_UPDOWN_FWD_RULE_IN
-export IPSEC_UPDOWN_FWD_DEST_IN
-export IPSEC_UPDOWN_FWD_RULE_OUT
-export IPSEC_UPDOWN_FWD_DEST_OUT
-
-
-start() {
-
-	[ -f /etc/ipsec.conf      ] || exit
-	[ -e /var/run/starter.pid ] && exit
-
-	/usr/sbin/ipsec _showstatus start
-	
-	# stuff the dnsmasq cache in case dns is on our own subnet
-	for peer in `grep left= /etc/ipsec.conf | \
-				cut -f 1 -d% | cut -f 2 -d=` ; do
-		ping -c 1 $peer > /dev/null 2>&1
-	done
-	
-	/usr/sbin/ipsec start || exit
-	
-	# work around broken routing behavior:
-	# a route to the local wan segment will appear
-	# the need was removed in the patched _updown script
-
-	while ! route -n | grep -q ipsec ; do sleep 1 ; done
-
-	defint=`route -n | awk '/^0.0.0.0/{print $8}'`
-	defnet=`route -n | grep $defint | awk  '!/^0.0.0.0/{print $1}'`
-	dnmask=`route -n | grep $defint | awk  '!/^0.0.0.0/{print $3}'`
-	tundev=`route -n | grep $defnet | awk '/ipsec/{print $8}'`
-	
-	route del -net $defnet netmask $dnmask dev $tundev
-}
-
-
-stop() {
-
-	/usr/sbin/ipsec stop 2> /dev/null
-
-	# wait until the shutdown actually happens
-	while [ -e /var/run/starter.pid ] ; do
-		if [ -d /proc/`cat /var/run/starter.pid` ] ; then
-			sleep 1
-		else
-			rm /var/run/starter.pid
-		fi
-	done
-
-	# kill any lingering processes
-	while ps auxww | grep -q ipsec | grep -v init.d; do
-		kill `ps auxww | grep -v init.d | awk '/\/ipsec\//{print $1}'` 2> /dev/null
-		sleep 1
-	done
-
- 	ipsec _showstatus stop
-}
-