diff options
Diffstat (limited to 'package/network/config/netifd/files')
11 files changed, 440 insertions, 0 deletions
diff --git a/package/network/config/netifd/files/etc/hotplug.d/iface/00-netstate b/package/network/config/netifd/files/etc/hotplug.d/iface/00-netstate new file mode 100644 index 000000000..c50cda6ea --- /dev/null +++ b/package/network/config/netifd/files/etc/hotplug.d/iface/00-netstate @@ -0,0 +1,8 @@ +[ ifup = "$ACTION" ] && { + uci_toggle_state network "$INTERFACE" up 1 + uci_toggle_state network "$INTERFACE" connect_time $(sed -ne 's![^0-9].*$!!p' /proc/uptime) + [ -n "$DEVICE" ] && { + uci_toggle_state network "$INTERFACE" device "$(uci -q get network.$INTERFACE.ifname)" + uci_toggle_state network "$INTERFACE" ifname "$DEVICE" + } +} diff --git a/package/network/config/netifd/files/etc/hotplug.d/iface/10-sysctl b/package/network/config/netifd/files/etc/hotplug.d/iface/10-sysctl new file mode 100644 index 000000000..33ac5c329 --- /dev/null +++ b/package/network/config/netifd/files/etc/hotplug.d/iface/10-sysctl @@ -0,0 +1,36 @@ +# Skip fake devices (e.g. relayd) +grep -qs "^ *$DEVICE:" /proc/net/dev || exit 0 + +case "$ACTION" in + ifup) + include /lib/network + scan_interfaces + + # Setup sysctls + local proto accept_ra send_rs + + config_get proto "$INTERFACE" proto + if [ "$proto" = dhcp ]; then + accept_ra=1 + send_rs=0 + else + accept_ra=0 + send_rs=1 + fi + + config_get_bool accept_ra "$INTERFACE" accept_ra $accept_ra + [ $accept_ra -eq 0 ] || { + logger -t ifup "Allowing Router Advertisements on $INTERFACE ($DEVICE)" + accept_ra=2 + } + do_sysctl "net.ipv6.conf.$DEVICE.accept_ra" $accept_ra + + config_get_bool send_rs "$INTERFACE" send_rs $send_rs + [ $send_rs -eq 0 ] || { + logger -t ifup "Enabling Router Solicitations on $INTERFACE ($DEVICE)" + send_rs=2 + } + do_sysctl "net.ipv6.conf.$DEVICE.forwarding" $send_rs + ;; +esac + diff --git a/package/network/config/netifd/files/etc/init.d/network b/package/network/config/netifd/files/etc/init.d/network new file mode 100755 index 000000000..28b1ba3dd --- /dev/null +++ b/package/network/config/netifd/files/etc/init.d/network @@ -0,0 +1,47 @@ +#!/bin/sh /etc/rc.common + +START=20 +STOP=90 + +SERVICE_DAEMONIZE=1 +SERVICE_WRITE_PID=1 + +start() { + stop + [ -e /proc/sys/kernel/core_pattern ] && { + ulimit -c unlimited + echo '/tmp/%e.%p.%s.%t.core' > /proc/sys/kernel/core_pattern + } + service_start /sbin/netifd + + setup_switch() { return 0; } + + include /lib/network + setup_switch + + sleep 1 + + /sbin/wifi down + /sbin/wifi up +} + +restart() { + ifdown -a + sleep 1 + start +} + +shutdown() { + ifdown -a + stop +} + +stop() { + service_stop /sbin/netifd +} + +reload() { + ubus call network reload + /sbin/wifi down + /sbin/wifi up +} diff --git a/package/network/config/netifd/files/lib/netifd/dhcp.script b/package/network/config/netifd/files/lib/netifd/dhcp.script new file mode 100755 index 000000000..0097a96f8 --- /dev/null +++ b/package/network/config/netifd/files/lib/netifd/dhcp.script @@ -0,0 +1,59 @@ +#!/bin/sh +[ -z "$1" ] && echo "Error: should be run by udhcpc" && exit 1 + +. /lib/functions.sh +. /lib/netifd/netifd-proto.sh + +set_classless_routes() { + local max=128 + local type + while [ -n "$1" -a -n "$2" -a $max -gt 0 ]; do + proto_add_ipv4_route "${1%%/*}" "${1##*/}" "$2" + max=$(($max-1)) + shift 2 + done +} + +setup_interface () { + proto_init_update "*" 1 + proto_add_ipv4_address "$ip" "${subnet:-255.255.255.0}" + # TODO: apply $broadcast + + for i in $router; do + proto_add_ipv4_route 0.0.0.0 0 "$i" + done + + # CIDR STATIC ROUTES (rfc3442) + [ -n "$staticroutes" ] && set_classless_routes $staticroutes + [ -n "$msstaticroutes" ] && set_classless_routes $msstaticroutes + + for dns in $dns; do + proto_add_dns_server "$dns" + done + for domain in $domain; do + proto_add_dns_search "$domain" + done + proto_send_update "$INTERFACE" + + # TODO + # [ -n "$ntpsrv" ] && change_state network "$ifc" lease_ntpsrv "$ntpsrv" + # [ -n "$timesvr" ] && change_state network "$ifc" lease_timesrv "$timesvr" + # [ -n "$hostname" ] && change_state network "$ifc" lease_hostname "$hostname" + # [ -n "$timezone" ] && change_state network "$ifc" lease_timezone "$timezone" +} + +deconfig_interface() { + proto_init_update "*" 0 + proto_send_update "$INTERFACE" +} + +case "$1" in + deconfig) + deconfig_interface + ;; + renew|bound) + setup_interface + ;; +esac + +exit 0 diff --git a/package/network/config/netifd/files/lib/netifd/proto/dhcp.sh b/package/network/config/netifd/files/lib/netifd/proto/dhcp.sh new file mode 100755 index 000000000..9182d58ad --- /dev/null +++ b/package/network/config/netifd/files/lib/netifd/proto/dhcp.sh @@ -0,0 +1,49 @@ +#!/bin/sh + +. /lib/functions.sh +. ../netifd-proto.sh +init_proto "$@" + +proto_dhcp_init_config() { + proto_config_add_string "ipaddr" + proto_config_add_string "netmask" + proto_config_add_string "hostname" + proto_config_add_string "clientid" + proto_config_add_string "vendorid" + proto_config_add_boolean "broadcast" + proto_config_add_string "reqopts" +} + +proto_dhcp_setup() { + local config="$1" + local iface="$2" + + local ipaddr hostname clientid vendorid broadcast reqopts + json_get_vars ipaddr hostname clientid vendorid broadcast reqopts + + local opt dhcpopts + for opt in $reqopts; do + append dhcpopts "-O $opt" + done + + [ "$broadcast" = 1 ] && broadcast="-O broadcast" || broadcast= + + proto_export "INTERFACE=$config" + proto_run_command "$config" udhcpc \ + -p /var/run/udhcpc-$iface.pid \ + -s /lib/netifd/dhcp.script \ + -f -t 0 -i "$iface" \ + ${ipaddr:+-r $ipaddr} \ + ${hostname:+-H $hostname} \ + ${clientid:+-x 0x3d:${clientid//:/}} \ + ${vendorid:+-V $vendorid} \ + $broadcast $dhcpopts +} + +proto_dhcp_teardown() { + local interface="$1" + proto_kill_command "$interface" +} + +add_protocol dhcp + diff --git a/package/network/config/netifd/files/lib/network/config.sh b/package/network/config/netifd/files/lib/network/config.sh new file mode 100755 index 000000000..9128971da --- /dev/null +++ b/package/network/config/netifd/files/lib/network/config.sh @@ -0,0 +1,79 @@ +#!/bin/sh +# Copyright (C) 2011 OpenWrt.org + +. /usr/share/libubox/jshn.sh + +find_config() { + local device="$1" + local ifdev ifl3dev ifobj + for ifobj in `ubus list network.interface.\*`; do + interface="${ifobj##network.interface.}" + ( + json_load "$(ifstatus $interface)" + json_get_var ifdev device + json_get_var ifl3dev l3_device + if [[ "$device" = "$ifdev" ]] || [[ "$device" = "$ifl3dev" ]]; then + echo "$interface" + exit 0 + else + exit 1 + fi + ) && return + done +} + +unbridge() { + return +} + +ubus_call() { + json_init + local _data="$(ubus -S call "$1" "$2")" + [ -z "$_data" ] && return 1 + json_load "$_data" + return 0 +} + + +fixup_interface() { + local config="$1" + local ifname type device l3dev + + config_get type "$config" type + config_get ifname "$config" ifname + config_get device "$config" device "$ifname" + [ "bridge" = "$type" ] && ifname="br-$config" + config_set "$config" device "$ifname" + ubus_call "network.interface.$config" status || return 0 + json_get_var l3dev l3_device + [ -n "$l3dev" ] && ifname="$l3dev" + json_init + config_set "$config" ifname "$ifname" + config_set "$config" device "$device" +} + +scan_interfaces() { + config_load network + config_foreach fixup_interface interface +} + +prepare_interface_bridge() { + local config="$1" + + [ -n "$config" ] || return 0 + ubus call network.interface."$config" prepare +} + +setup_interface() { + local iface="$1" + local config="$2" + + [ -n "$config" ] || return 0 + ubus call network.interface."$config" add_device "{ \"name\": \"$iface\" }" +} + +do_sysctl() { + [ -n "$2" ] && \ + sysctl -n -e -w "$1=$2" >/dev/null || \ + sysctl -n -e "$1" +} diff --git a/package/network/config/netifd/files/sbin/devstatus b/package/network/config/netifd/files/sbin/devstatus new file mode 100755 index 000000000..3c35b26a4 --- /dev/null +++ b/package/network/config/netifd/files/sbin/devstatus @@ -0,0 +1,12 @@ +#!/bin/sh +. /usr/share/libubox/jshn.sh +DEVICE="$1" + +[ -n "$DEVICE" ] || { + echo "Usage: $0 <device>" + exit 1 +} + +json_init +json_add_string name "$DEVICE" +ubus call network.device status "$(json_dump)" diff --git a/package/network/config/netifd/files/sbin/ifdown b/package/network/config/netifd/files/sbin/ifdown new file mode 120000 index 000000000..a0e5c176a --- /dev/null +++ b/package/network/config/netifd/files/sbin/ifdown @@ -0,0 +1 @@ +ifup
\ No newline at end of file diff --git a/package/network/config/netifd/files/sbin/ifstatus b/package/network/config/netifd/files/sbin/ifstatus new file mode 100755 index 000000000..511cc1d8d --- /dev/null +++ b/package/network/config/netifd/files/sbin/ifstatus @@ -0,0 +1,13 @@ +#!/bin/sh +INTERFACE="$1" + +[ -n "$INTERFACE" ] || { + echo "Usage: $0 <interface>" + exit 1 +} + +ubus -S list "network.interface.$INTERFACE" >/dev/null || { + echo "Interface $INTERFACE not found" + exit 1 +} +ubus call network.interface."$INTERFACE" status diff --git a/package/network/config/netifd/files/sbin/ifup b/package/network/config/netifd/files/sbin/ifup new file mode 100755 index 000000000..e6dbb3541 --- /dev/null +++ b/package/network/config/netifd/files/sbin/ifup @@ -0,0 +1,79 @@ +#!/bin/sh + +ifup_all= +setup_wifi= + +if_call() { + local interface="$1" + for mode in $modes; do + ubus call $interface $mode + done +} + +case "$0" in + *ifdown) modes=down;; + *ifup) + modes="down up" + setup_wifi=1 + ;; + *) echo "Invalid command: $0";; +esac + +while :; do + case "$1" in + -a) + ifup_all=1 + shift + ;; + -w) + setup_wifi= + shift + ;; + *) + break + ;; + esac +done + +[ "$modes" = "down up" ] && ubus call network reload +if [ -n "$ifup_all" ]; then + for interface in `ubus -S list 'network.interface.*'`; do + if_call "$interface" + done + [ -n "$setup_wifi" ] && /sbin/wifi up + exit +else + ubus -S list "network.interface.$1" > /dev/null || { + echo "Interface $1 not found" + exit + } + if_call "network.interface.$1" +fi + +if [ -n "$setup_wifi" ] && grep -sq config /etc/config/wireless; then + . /lib/functions.sh + + find_related_radios() { + local wdev wnet + config_get wdev "$1" device + config_get wnet "$1" network + + if [ -n "$wdev" ]; then + for wnet in $wnet; do + if [ "$wnet" = "$network" ]; then + append radio_devs "$wdev" "$N" + fi + done + fi + } + + local radio_devs + local network="$1" + config_load wireless + config_foreach find_related_radios wifi-iface + + local dev + for dev in $(echo "$radio_devs" | sort -u); do + /sbin/wifi up "$dev" + done +fi diff --git a/package/network/config/netifd/files/usr/share/udhcpc/default.script b/package/network/config/netifd/files/usr/share/udhcpc/default.script new file mode 100755 index 000000000..ac765a636 --- /dev/null +++ b/package/network/config/netifd/files/usr/share/udhcpc/default.script @@ -0,0 +1,57 @@ +#!/bin/sh +[ -z "$1" ] && echo "Error: should be run by udhcpc" && exit 1 + +set_classless_routes() { + local max=128 + local type + while [ -n "$1" -a -n "$2" -a $max -gt 0 ]; do + [ ${1##*/} -eq 32 ] && type=host || type=net + echo "udhcpc: adding route for $type $1 via $2" + route add -$type "$1" gw "$2" dev "$interface" + max=$(($max-1)) + shift 2 + done +} + +setup_interface() { + echo "udhcpc: ifconfig $interface $ip netmask ${subnet:-255.255.255.0} broadcast ${broadcast:-+}" + ifconfig $interface $ip netmask ${subnet:-255.255.255.0} broadcast ${broadcast:-+} + + [ -n "$router" ] && [ "$router" != "0.0.0.0" ] && [ "$router" != "255.255.255.255" ] && { + echo "udhcpc: setting default routers: $router" + + local valid_gw="" + for i in $router ; do + route add default gw $i dev $interface + valid_gw="${valid_gw:+$valid_gw|}$i" + done + + eval $(route -n | awk ' + /^0.0.0.0\W{9}('$valid_gw')\W/ {next} + /^0.0.0.0/ {print "route del -net "$1" gw "$2";"} + ') + } + + # CIDR STATIC ROUTES (rfc3442) + [ -n "$staticroutes" ] && set_classless_routes $staticroutes + [ -n "$msstaticroutes" ] && set_classless_routes $msstaticroutes +} + + +applied= +case "$1" in + deconfig) + ifconfig "$interface" 0.0.0.0 + ;; + renew) + setup_interface update + ;; + bound) + setup_interface ifup + ;; +esac + +# user rules +[ -f /etc/udhcpc.user ] && . /etc/udhcpc.user + +exit 0 |