summaryrefslogtreecommitdiffstats
path: root/package/mac80211
diff options
context:
space:
mode:
Diffstat (limited to 'package/mac80211')
-rw-r--r--package/mac80211/Makefile129
-rw-r--r--package/mac80211/patches-brcm/001-disable_drivers.patch159
-rw-r--r--package/mac80211/patches-brcm/002-ssb-backport.patch296
-rw-r--r--package/mac80211/patches-brcm/004-allow-ap-vlan-modes.patch25
4 files changed, 606 insertions, 3 deletions
diff --git a/package/mac80211/Makefile b/package/mac80211/Makefile
index 87651e7bf..177442dee 100644
--- a/package/mac80211/Makefile
+++ b/package/mac80211/Makefile
@@ -18,7 +18,7 @@ ifneq ($(CONFIG_LINUX_2_6_27),)
else
PKG_VERSION:=2008-08-06
PKG_SOURCE_URL:=http://www.orbit-lab.org/kernel/compat-wireless-2.6/2008/08
- PATCH_DIR:=./patches-old
+ PATCH_DIR:=$(if $(CONFIG_TARGET_brcm47xx),./patches-brcm,./patches-old)
endif
PKG_SOURCE:=compat-wireless-$(PKG_VERSION).tar.bz2
@@ -30,6 +30,7 @@ STAMP_CONFIGURED:=$(STAMP_CONFIGURED)_$(call confvar,CONFIG_PACKAGE_kmod-mac8021
define KernelPackage/mac80211
SUBMENU:=Wireless Drivers
TITLE:=Linux 802.11 Wireless Networking Stack
+ URL:=http://linuxwireless.org/
DEPENDS:=@LINUX_2_6 +kmod-crypto-arc4 +kmod-crypto-aes +wireless-tools @!TARGET_avr32
FILES:= \
$(PKG_BUILD_DIR)/net/mac80211/mac80211.$(LINUX_KMOD_SUFFIX) \
@@ -138,7 +139,7 @@ endef
define KernelPackage/rt2800-pci
$(call KernelPackage/rt2x00/Default)
- DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci @LINUX_2_6_27
+ DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci @LINUX_2_6_27||@LINUX_2_6_28
TITLE+= (RT2860 PCI)
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800pci.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,27,rt2800pci)
@@ -156,7 +157,7 @@ $(eval $(call Download,zd1211rw))
define KernelPackage/zd1211rw
SUBMENU:=Wireless Drivers
TITLE:=Zydas ZD1211 support
- DEPENDS:=@LINUX_2_6_24||@LINUX_2_6_25||@LINUX_2_6_26||@LINUX_2_6_27 @USB_SUPPORT +kmod-usb-core +kmod-mac80211
+ DEPENDS:= @USB_SUPPORT +kmod-usb-core +kmod-mac80211
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/zd1211rw/zd1211rw.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,60,zd1211rw)
endef
@@ -164,11 +165,31 @@ endef
define KernelPackage/ath5k
SUBMENU:=Wireless Drivers
TITLE:=Atheros 5xxx wireless cards support
+ URL:=http://linuxwireless.org/en/users/Drivers/ath5k
DEPENDS+= @PCI_SUPPORT +kmod-mac80211
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath5k/ath5k.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,27,ath5k)
endef
+define KernelPackage/ath5k/description
+This module adds support for wireless adapters based on
+Atheros 5xxx chipset.
+endef
+
+define KernelPackage/ath9k-new
+ SUBMENU:=Wireless Drivers
+ TITLE:=Atheros 802.11n wireless cards support
+ URL:=http://linuxwireless.org/en/users/Drivers/ath9k
+ DEPENDS+= @PCI_SUPPORT +kmod-mac80211 @LINUX_2_6_27||@LINUX_2_6_28 @!kmod-ath9k
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath9k/ath9k.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,27,ath9k)
+endef
+
+define KernelPackage/ath9k-new/description
+This module adds support for wireless adapters based on
+Atheros IEEE 802.11n AR5008 and AR9001 family of chipsets.
+endef
+
define KernelPackage/mac80211-hwsim
SUBMENU:=Wireless Drivers
TITLE:=mac80211 HW simulation device
@@ -177,6 +198,76 @@ define KernelPackage/mac80211-hwsim
AUTOLOAD:=$(call AutoLoad,60,mac80211_hwsim)
endef
+#Broadcom firmware
+PKG_B43_FWV4_NAME:=broadcom-wl
+PKG_B43_FWV4_VERSION:=4.150.10.5
+PKG_B43_FWV4_OBJECT:=driver/wl_apsta_mimo.o
+PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
+PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/
+PKG_B43_FWV4_MD5SUM:=0c6ba9687114c6b598e8019e262d9a60
+
+PKG_B43_FWV3_NAME:=wl_apsta
+PKG_B43_FWV3_VERSION:=3.130.20.0
+PKG_B43_FWV3_SOURCE:=$(PKG_B43_FWV3_NAME)-$(PKG_B43_FWV3_VERSION).o
+PKG_B43_FWV3_SOURCE_URL:=http://downloads.openwrt.org/sources/
+PKG_B43_FWV3_MD5SUM:=e08665c5c5b66beb9c3b2dd54aa80cb3
+
+PKG_B43_FWCUTTER_NAME:=b43-fwcutter
+PKG_B43_FWCUTTER_VERSION:=011
+PKG_B43_FWCUTTER_SOURCE:=$(PKG_B43_FWCUTTER_NAME)-$(PKG_B43_FWCUTTER_VERSION).tar.bz2
+PKG_B43_FWCUTTER_SOURCE_URL:=http://bu3sch.de/b43/fwcutter/
+PKG_B43_FWCUTTER_MD5SUM:=3db2f4de85a459451f5b391cf67a8d44
+
+define Download/b43-common
+ FILE:=$(PKG_B43_FWCUTTER_SOURCE)
+ URL:=$(PKG_B43_FWCUTTER_SOURCE_URL)
+ MD5SUM:=$(PKG_B43_FWCUTTER_MD5SUM)
+endef
+$(eval $(call Download,b43-common))
+
+define Download/b43
+ FILE:=$(PKG_B43_FWV4_SOURCE)
+ URL:=$(PKG_B43_FWV4_SOURCE_URL)
+ MD5SUM:=$(PKG_B43_FWV4_MD5SUM)
+endef
+$(eval $(call Download,b43))
+
+define Download/b43legacy
+ FILE:=$(PKG_B43_FWV3_SOURCE)
+ URL:=$(PKG_B43_FWV3_SOURCE_URL)
+ MD5SUM:=$(PKG_B43_FWV3_MD5SUM)
+endef
+$(eval $(call Download,b43legacy))
+
+define KernelPackage/b43-common
+ SUBMENU:=Wireless Drivers
+ TITLE:=Generic stuff for Broadcom wireless devices
+ URL:=http://linuxwireless.org/en/users/Drivers/b43
+ DEPENDS:=@TARGET_brcm47xx +kmod-mac80211
+endef
+
+define KernelPackage/b43
+$(call KernelPackage/b43-common)
+ TITLE:=Broadcom 43xx wireless support
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/b43/b43.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,30,b43)
+endef
+
+define KernelPackage/b43/description
+Kernel module for Broadcom 43xx wireless support (mac80211 stack) new
+endef
+
+define KernelPackage/b43legacy
+$(call KernelPackage/b43-common)
+ TITLE:=Broadcom 43xx-legacy wireless support
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/b43legacy/b43legacy.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,30,b43legacy)
+endef
+
+define KernelPackage/b43legacy/description
+Kernel module for Broadcom 43xx-legacy wireless support (mac80211 stack) new
+endef
+
BUILDFLAGS:= \
-I$(PKG_BUILD_DIR)/include \
$(foreach opt,$(CONFOPTS),-DCONFIG_$(opt)) \
@@ -208,6 +299,10 @@ define Build/Prepare
-unzip -jod $(PKG_BUILD_DIR) $(DL_DIR)/$(RT2860FW)
$(TAR) -C $(PKG_BUILD_DIR) -xjf $(DL_DIR)/$(ZD1211FW_NAME)-$(ZD1211FW_VERSION).tar.bz2
$(if $(CONFIG_TARGET_brcm47xx),rm -rf $(PKG_BUILD_DIR)/include/linux/ssb)
+ rm $(PKG_BUILD_DIR)/include/net/ieee80211_crypt.h
+ rm $(PKG_BUILD_DIR)/include/net/ieee80211.h
+ rm $(PKG_BUILD_DIR)/include/net/ieee80211_radiotap.h
+ rm $(PKG_BUILD_DIR)/include/linux/eeprom_93cx6.h
endef
ifneq ($(CONFIG_PACKAGE_kmod-mac80211),)
@@ -251,6 +346,31 @@ define KernelPackage/zd1211rw/install
$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(ZD1211FW_NAME)/zd1211* $(1)/lib/firmware/zd1211
endef
+define Build/b43-common
+ tar xjf "$(DL_DIR)/$(PKG_B43_FWCUTTER_SOURCE)" -C "$(PKG_BUILD_DIR)"
+ $(MAKE) -C "$(PKG_BUILD_DIR)/$(PKG_B43_FWCUTTER_NAME)-$(PKG_B43_FWCUTTER_VERSION)" \
+ CFLAGS="-I$(STAGING_DIR_HOST)/include -include endian.h"
+endef
+
+define KernelPackage/b43/install
+ $(call Build/b43-common)
+ tar xjf "$(DL_DIR)/$(PKG_B43_FWV4_SOURCE)" -C "$(PKG_BUILD_DIR)"
+ $(INSTALL_DIR) $(1)/lib/firmware/
+
+ $(PKG_BUILD_DIR)/$(PKG_B43_FWCUTTER_NAME)-$(PKG_B43_FWCUTTER_VERSION)/b43-fwcutter \
+ -w $(1)/lib/firmware/ \
+ $(PKG_BUILD_DIR)/$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/$(PKG_B43_FWV4_OBJECT)
+endef
+
+define KernelPackage/b43legacy/install
+ $(call Build/b43-common)
+ $(INSTALL_DIR) $(1)/lib/firmware/
+
+ $(PKG_BUILD_DIR)/$(PKG_B43_FWCUTTER_NAME)-$(PKG_B43_FWCUTTER_VERSION)/b43-fwcutter \
+ -w $(1)/lib/firmware/ \
+ $(DL_DIR)/$(PKG_B43_FWV3_SOURCE)
+endef
+
$(eval $(call KernelPackage,ath5k))
$(eval $(call KernelPackage,mac80211))
$(eval $(call KernelPackage,rt2x00-lib))
@@ -264,3 +384,6 @@ $(eval $(call KernelPackage,rt73-usb))
$(eval $(call KernelPackage,rt2800-pci))
$(eval $(call KernelPackage,zd1211rw))
$(eval $(call KernelPackage,mac80211-hwsim))
+$(eval $(call KernelPackage,ath9k-new))
+$(eval $(call KernelPackage,b43))
+$(eval $(call KernelPackage,b43legacy))
diff --git a/package/mac80211/patches-brcm/001-disable_drivers.patch b/package/mac80211/patches-brcm/001-disable_drivers.patch
new file mode 100644
index 000000000..a2949d771
--- /dev/null
+++ b/package/mac80211/patches-brcm/001-disable_drivers.patch
@@ -0,0 +1,159 @@
+--- compat-wireless-2008-08-06/config.mk 2008-07-18 06:11:03.000000000 +0200
++++ compat-wireless-2008-08-06-new/config.mk 2008-11-09 13:16:02.000000000 +0100
+@@ -72,69 +72,31 @@
+ CONFIG_ATH5K=m
+ CONFIG_ATH5K_DEBUG=n
+
+-# Required for older kernels which still use this flag.
+-CONFIG_IWLWIFI=m
+-
+-CONFIG_IWLCORE=m
+-CONFIG_IWL3945=m
+-CONFIG_IWL4965=m
+-CONFIG_IWL4965_HT=y
+ CONFIG_B43=m
++CONFIG_B43_NPHY=y
+ # B43 uses PCMCIA only for Compact Flash. The Cardbus cards uses PCI
+ # Example, bcm4318:
+ # http://www.multicap.biz/wireless-lan/indoor-wlan-hardware/sdc-cf10g-80211g-compact-flash-module
+-CONFIG_B43_PCMCIA=y
++# CONFIG_B43_PCMCIA=y
+ CONFIG_B43_DMA=y
+-CONFIG_B43_PIO=y
++# CONFIG_B43_PIO=y
+ # B43_PIO selects SSB_BLOCKIO
+-CONFIG_SSB_BLOCKIO=y
+-CONFIG_B43_DMA_AND_PIO_MODE=y
+-CONFIG_B43_PCI_AUTOSELECT=y
+-CONFIG_B43_PCICORE_AUTOSELECT=y
+-#CONFIG_B43_RFKILL=n
++# CONFIG_SSB_BLOCKIO=y
++# CONFIG_B43_DMA_AND_PIO_MODE=y
++# CONFIG_B43_PCI_AUTOSELECT=y
++# CONFIG_B43_PCICORE_AUTOSELECT=y
++CONFIG_B43_RFKILL=y
+ CONFIG_B43_LEDS=y
+ # CONFIG_B43_DEBUG is not set
+
+ CONFIG_B43LEGACY=m
+-CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+-CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
++CONFIG_B43LEGACY_RFKILL=y
++CONFIG_B43LEGACY_LEDS=y
++# CONFIG_B43LEGACY_PCI_AUTOSELECT=y
++# CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+ CONFIG_B43LEGACY_DMA=y
+-CONFIG_B43LEGACY_PIO=y
+-CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+-
+-# The Intel ipws
+-CONFIG_IPW2100=m
+-CONFIG_IPW2100_MONITOR=y
+-CONFIG_IPW2200=m
+-CONFIG_IPW2200_MONITOR=y
+-CONFIG_IPW2200_RADIOTAP=y
+-CONFIG_IPW2200_PROMISCUOUS=y
+-# The above enables use a second interface prefixed 'rtap'.
+-# Example usage:
+-#
+-# % modprobe ipw2200 rtap_iface=1
+-# % ifconfig rtap0 up
+-# % tethereal -i rtap0
+-#
+-# If you do not specify 'rtap_iface=1' as a module parameter then
+-# the rtap interface will not be created and you will need to turn
+-# it on via sysfs:
+-#
+-# % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface
+-CONFIG_IPW2200_QOS=y
+-
+-NEED_IEEE80211=y
+-
+-CONFIG_P54_PCI=m
+-
+-CONFIG_SSB_PCIHOST_POSSIBLE=y
+-CONFIG_SSB_PCIHOST=y
+-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+-CONFIG_SSB_DRIVER_PCICORE=y
+-CONFIG_SSB_B43_PCI_BRIDGE=y
+-
+-CONFIG_RTL8180=m
+-CONFIG_ADM8211=m
++# CONFIG_B43LEGACY_PIO=y
++# CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+
+ CONFIG_RT2X00_LIB_PCI=m
+ CONFIG_RT2400PCI=m
+@@ -159,32 +121,6 @@
+ ifneq ($(CONFIG_USB),)
+ CONFIG_ZD1211RW=m
+
+-# support for USB Wireless devices using Atmel at76c503,
+-# at76c505 or at76c505a chips.
+-CONFIG_USB_ATMEL=m
+-
+-# Stuff here things which depend on kernel versions for USB
+-ifeq ($(shell test -e $(KLIB_BUILD)/Makefile && echo yes),yes)
+-KERNEL_SUBLEVEL = $(shell $(MAKE) -C $(KLIB_BUILD) kernelversion | sed -n 's/^2\.6\.\([0-9]\+\).*/\1/p')
+-ifeq ($(shell test $(KERNEL_SUBLEVEL) -gt 21 && echo yes),yes)
+-
+-# Sorry, rndis_wlan uses cancel_work_sync which is new and can't be done in compat...
+-
+-# Wireless RNDIS USB support (RTL8185 802.11g) A-Link WL54PC
+-# All of these devices are based on Broadcom 4320 chip which
+-# is only wireless RNDIS chip known to date.
+-# Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER
+-# it also requires new RNDIS_HOST and CDC_ETHER modules which we add
+-CONFIG_USB_NET_RNDIS_HOST=m
+-CONFIG_USB_NET_RNDIS_WLAN=m
+-CONFIG_USB_NET_CDCETHER=m
+-
+-endif
+-endif
+-
+-CONFIG_P54_USB=m
+-CONFIG_RTL8187=m
+-
+ # RT2500USB does not require firmware
+ CONFIG_RT2500USB=m
+ CONFIG_RT2X00_LIB_USB=m
+@@ -209,39 +145,6 @@
+ CONFIG_RT2X00_LIB_FIRMWARE=y
+ endif
+
+-# p54
+-CONFIG_P54_COMMON=m
+-
+-# Sonics Silicon Backplane
+-CONFIG_SSB_POSSIBLE=y
+-CONFIG_SSB=m
+-CONFIG_SSB_SPROM=y
+-
+-ifneq ($(CONFIG_PCMCIA),)
+-CONFIG_SSB_PCMCIAHOST=y
+-endif
+-
+-# These two are for mips
+-CONFIG_SSB_DRIVER_MIPS=n
+-CONFIG_SSB_PCICORE_HOSTMODE=n
+-# CONFIG_SSB_DEBUG is not set
+-# CONFIG_SSB_DRIVER_EXTIF=y
+-
+-ifneq ($(CONFIG_USB),)
+-CONFIG_LIBERTAS_USB=m
+-NEED_LIBERTAS=y
+-endif
+-ifneq ($(CONFIG_PCMCIA),)
+-CONFIG_LIBERTAS_CS=m
+-NEED_LIBERTAS=y
+-endif
+-ifeq ($(NEED_LIBERTAS),y)
+-CONFIG_LIBERTAS=m
+-# Libertas uses the old stack but not fully, it will soon
+-# be cleaned.
+-NEED_IEEE80211=y
+-endif
+-
+ ifeq ($(NEED_IEEE80211),y)
+ # Old ieee80211 "stack"
+ # Note: old softmac is scheduled for removal so we
diff --git a/package/mac80211/patches-brcm/002-ssb-backport.patch b/package/mac80211/patches-brcm/002-ssb-backport.patch
new file mode 100644
index 000000000..a57143ae1
--- /dev/null
+++ b/package/mac80211/patches-brcm/002-ssb-backport.patch
@@ -0,0 +1,296 @@
+This patch backports the interface of the b43 and b43legacy driver from
+the new to the old ssb API. This patch is needed as long the old ssb
+version is used in the kernel for broadcom devices. After upgrading to
+ssb version out of kernel 2.6.27 or later this patch is not needed any more.
+
+diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
+index 098f886..8a09a1d 100644
+--- a/drivers/net/wireless/b43/dma.c
++++ b/drivers/net/wireless/b43/dma.c
+@@ -328,11 +328,11 @@ static inline
+ dma_addr_t dmaaddr;
+
+ if (tx) {
+- dmaaddr = ssb_dma_map_single(ring->dev->dev,
+- buf, len, DMA_TO_DEVICE);
++ dmaaddr = dma_map_single(ring->dev->dev->dma_dev,
++ buf, len, DMA_TO_DEVICE);
+ } else {
+- dmaaddr = ssb_dma_map_single(ring->dev->dev,
+- buf, len, DMA_FROM_DEVICE);
++ dmaaddr = dma_map_single(ring->dev->dev->dma_dev,
++ buf, len, DMA_FROM_DEVICE);
+ }
+
+ return dmaaddr;
+@@ -343,11 +343,11 @@ static inline
+ dma_addr_t addr, size_t len, int tx)
+ {
+ if (tx) {
+- ssb_dma_unmap_single(ring->dev->dev,
+- addr, len, DMA_TO_DEVICE);
++ dma_unmap_single(ring->dev->dev->dma_dev,
++ addr, len, DMA_TO_DEVICE);
+ } else {
+- ssb_dma_unmap_single(ring->dev->dev,
+- addr, len, DMA_FROM_DEVICE);
++ dma_unmap_single(ring->dev->dev->dma_dev,
++ addr, len, DMA_FROM_DEVICE);
+ }
+ }
+
+@@ -356,8 +356,8 @@ static inline
+ dma_addr_t addr, size_t len)
+ {
+ B43_WARN_ON(ring->tx);
+- ssb_dma_sync_single_for_cpu(ring->dev->dev,
+- addr, len, DMA_FROM_DEVICE);
++ dma_sync_single_for_cpu(ring->dev->dev->dma_dev,
++ addr, len, DMA_FROM_DEVICE);
+ }
+
+ static inline
+@@ -365,8 +365,8 @@ static inline
+ dma_addr_t addr, size_t len)
+ {
+ B43_WARN_ON(ring->tx);
+- ssb_dma_sync_single_for_device(ring->dev->dev,
+- addr, len, DMA_FROM_DEVICE);
++ dma_sync_single_for_device(ring->dev->dev->dma_dev,
++ addr, len, DMA_FROM_DEVICE);
+ }
+
+ static inline
+@@ -381,6 +381,7 @@ static inline
+
+ static int alloc_ringmemory(struct b43_dmaring *ring)
+ {
++ struct device *dma_dev = ring->dev->dev->dma_dev;
+ gfp_t flags = GFP_KERNEL;
+
+ /* The specs call for 4K buffers for 30- and 32-bit DMA with 4K
+@@ -391,14 +392,11 @@ static int alloc_ringmemory(struct b43_dmaring *ring)
+ * For unknown reasons - possibly a hardware error - the BCM4311 rev
+ * 02, which uses 64-bit DMA, needs the ring buffer in very low memory,
+ * which accounts for the GFP_DMA flag below.
+- *
+- * The flags here must match the flags in free_ringmemory below!
+ */
+ if (ring->type == B43_DMA_64BIT)
+ flags |= GFP_DMA;
+- ring->descbase = ssb_dma_alloc_consistent(ring->dev->dev,
+- B43_DMA_RINGMEMSIZE,
+- &(ring->dmabase), flags);
++ ring->descbase = dma_alloc_coherent(dma_dev, B43_DMA_RINGMEMSIZE,
++ &(ring->dmabase), flags);
+ if (!ring->descbase) {
+ b43err(ring->dev->wl, "DMA ringmemory allocation failed\n");
+ return -ENOMEM;
+@@ -410,13 +408,10 @@ static int alloc_ringmemory(struct b43_dmaring *ring)
+
+ static void free_ringmemory(struct b43_dmaring *ring)
+ {
+- gfp_t flags = GFP_KERNEL;
+-
+- if (ring->type == B43_DMA_64BIT)
+- flags |= GFP_DMA;
++ struct device *dma_dev = ring->dev->dev->dma_dev;
+
+- ssb_dma_free_consistent(ring->dev->dev, B43_DMA_RINGMEMSIZE,
+- ring->descbase, ring->dmabase, flags);
++ dma_free_coherent(dma_dev, B43_DMA_RINGMEMSIZE,
++ ring->descbase, ring->dmabase);
+ }
+
+ /* Reset the RX DMA channel */
+@@ -523,7 +518,7 @@ static bool b43_dma_mapping_error(struct b43_dmaring *ring,
+ dma_addr_t addr,
+ size_t buffersize, bool dma_to_device)
+ {
+- if (unlikely(ssb_dma_mapping_error(ring->dev->dev, addr)))
++ if (unlikely(dma_mapping_error(addr)))
+ return 1;
+
+ switch (ring->type) {
+@@ -849,10 +844,10 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev,
+ goto err_kfree_meta;
+
+ /* test for ability to dma to txhdr_cache */
+- dma_test = ssb_dma_map_single(dev->dev,
+- ring->txhdr_cache,
+- b43_txhdr_size(dev),
+- DMA_TO_DEVICE);
++ dma_test = dma_map_single(dev->dev->dma_dev,
++ ring->txhdr_cache,
++ b43_txhdr_size(dev),
++ DMA_TO_DEVICE);
+
+ if (b43_dma_mapping_error(ring, dma_test,
+ b43_txhdr_size(dev), 1)) {
+@@ -864,10 +859,10 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev,
+ if (!ring->txhdr_cache)
+ goto err_kfree_meta;
+
+- dma_test = ssb_dma_map_single(dev->dev,
+- ring->txhdr_cache,
+- b43_txhdr_size(dev),
+- DMA_TO_DEVICE);
++ dma_test = dma_map_single(dev->dev->dma_dev,
++ ring->txhdr_cache,
++ b43_txhdr_size(dev),
++ DMA_TO_DEVICE);
+
+ if (b43_dma_mapping_error(ring, dma_test,
+ b43_txhdr_size(dev), 1)) {
+@@ -878,9 +873,9 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev,
+ }
+ }
+
+- ssb_dma_unmap_single(dev->dev,
+- dma_test, b43_txhdr_size(dev),
+- DMA_TO_DEVICE);
++ dma_unmap_single(dev->dev->dma_dev,
++ dma_test, b43_txhdr_size(dev),
++ DMA_TO_DEVICE);
+ }
+
+ err = alloc_ringmemory(ring);
+diff --git a/drivers/net/wireless/b43legacy/dma.c b/drivers/net/wireless/b43legacy/dma.c
+index fb6819e..87b1049 100644
+--- a/drivers/net/wireless/b43legacy/dma.c
++++ b/drivers/net/wireless/b43legacy/dma.c
+@@ -393,13 +393,13 @@ dma_addr_t map_descbuffer(struct b43legacy_dmaring *ring,
+ dma_addr_t dmaaddr;
+
+ if (tx)
+- dmaaddr = ssb_dma_map_single(ring->dev->dev,
+- buf, len,
+- DMA_TO_DEVICE);
++ dmaaddr = dma_map_single(ring->dev->dev->dma_dev,
++ buf, len,
++ DMA_TO_DEVICE);
+ else
+- dmaaddr = ssb_dma_map_single(ring->dev->dev,
+- buf, len,
+- DMA_FROM_DEVICE);
++ dmaaddr = dma_map_single(ring->dev->dev->dma_dev,
++ buf, len,
++ DMA_FROM_DEVICE);
+
+ return dmaaddr;
+ }
+@@ -411,13 +411,13 @@ void unmap_descbuffer(struct b43legacy_dmaring *ring,
+ int tx)
+ {
+ if (tx)
+- ssb_dma_unmap_single(ring->dev->dev,
+- addr, len,
+- DMA_TO_DEVICE);
++ dma_unmap_single(ring->dev->dev->dma_dev,
++ addr, len,
++ DMA_TO_DEVICE);
+ else
+- ssb_dma_unmap_single(ring->dev->dev,
+- addr, len,
+- DMA_FROM_DEVICE);
++ dma_unmap_single(ring->dev->dev->dma_dev,
++ addr, len,
++ DMA_FROM_DEVICE);
+ }
+
+ static inline
+@@ -427,8 +427,8 @@ void sync_descbuffer_for_cpu(struct b43legacy_dmaring *ring,
+ {
+ B43legacy_WARN_ON(ring->tx);
+
+- ssb_dma_sync_single_for_cpu(ring->dev->dev,
+- addr, len, DMA_FROM_DEVICE);
++ dma_sync_single_for_cpu(ring->dev->dev->dma_dev,
++ addr, len, DMA_FROM_DEVICE);
+ }
+
+ static inline
+@@ -438,8 +438,8 @@ void sync_descbuffer_for_device(struct b43legacy_dmaring *ring,
+ {
+ B43legacy_WARN_ON(ring->tx);
+
+- ssb_dma_sync_single_for_device(ring->dev->dev,
+- addr, len, DMA_FROM_DEVICE);
++ dma_sync_single_for_device(ring->dev->dev->dma_dev,
++ addr, len, DMA_FROM_DEVICE);
+ }
+
+ static inline
+@@ -458,11 +458,10 @@ void free_descriptor_buffer(struct b43legacy_dmaring *ring,
+
+ static int alloc_ringmemory(struct b43legacy_dmaring *ring)
+ {
+- /* GFP flags must match the flags in free_ringmemory()! */
+- ring->descbase = ssb_dma_alloc_consistent(ring->dev->dev,
+- B43legacy_DMA_RINGMEMSIZE,
+- &(ring->dmabase),
+- GFP_KERNEL);
++ struct device *dma_dev = ring->dev->dev->dma_dev;
++
++ ring->descbase = dma_alloc_coherent(dma_dev, B43legacy_DMA_RINGMEMSIZE,
++ &(ring->dmabase), GFP_KERNEL);
+ if (!ring->descbase) {
+ b43legacyerr(ring->dev->wl, "DMA ringmemory allocation"
+ " failed\n");
+@@ -475,8 +474,10 @@ static int alloc_ringmemory(struct b43legacy_dmaring *ring)
+
+ static void free_ringmemory(struct b43legacy_dmaring *ring)
+ {
+- ssb_dma_free_consistent(ring->dev->dev, B43legacy_DMA_RINGMEMSIZE,
+- ring->descbase, ring->dmabase, GFP_KERNEL);
++ struct device *dma_dev = ring->dev->dev->dma_dev;
++
++ dma_free_coherent(dma_dev, B43legacy_DMA_RINGMEMSIZE,
++ ring->descbase, ring->dmabase);
+ }
+
+ /* Reset the RX DMA channel */
+@@ -588,7 +589,7 @@ static bool b43legacy_dma_mapping_error(struct b43legacy_dmaring *ring,
+ size_t buffersize,
+ bool dma_to_device)
+ {
+- if (unlikely(ssb_dma_mapping_error(ring->dev->dev, addr)))
++ if (unlikely(dma_mapping_error(addr)))
+ return 1;
+
+ switch (ring->type) {
+@@ -905,9 +906,9 @@ struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev,
+ goto err_kfree_meta;
+
+ /* test for ability to dma to txhdr_cache */
+- dma_test = ssb_dma_map_single(dev->dev, ring->txhdr_cache,
+- sizeof(struct b43legacy_txhdr_fw3),
+- DMA_TO_DEVICE);
++ dma_test = dma_map_single(dev->dev->dma_dev, ring->txhdr_cache,
++ sizeof(struct b43legacy_txhdr_fw3),
++ DMA_TO_DEVICE);
+
+ if (b43legacy_dma_mapping_error(ring, dma_test,
+ sizeof(struct b43legacy_txhdr_fw3), 1)) {
+@@ -919,7 +920,7 @@ struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev,
+ if (!ring->txhdr_cache)
+ goto err_kfree_meta;
+
+- dma_test = ssb_dma_map_single(dev->dev,
++ dma_test = dma_map_single(dev->dev->dma_dev,
+ ring->txhdr_cache,
+ sizeof(struct b43legacy_txhdr_fw3),
+ DMA_TO_DEVICE);
+@@ -929,9 +930,9 @@ struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev,
+ goto err_kfree_txhdr_cache;
+ }
+
+- ssb_dma_unmap_single(dev->dev, dma_test,
+- sizeof(struct b43legacy_txhdr_fw3),
+- DMA_TO_DEVICE);
++ dma_unmap_single(dev->dev->dma_dev,
++ dma_test, sizeof(struct b43legacy_txhdr_fw3),
++ DMA_TO_DEVICE);
+ }
+
+ ring->nr_slots = nr_slots;
diff --git a/package/mac80211/patches-brcm/004-allow-ap-vlan-modes.patch b/package/mac80211/patches-brcm/004-allow-ap-vlan-modes.patch
new file mode 100644
index 000000000..a8080b20e
--- /dev/null
+++ b/package/mac80211/patches-brcm/004-allow-ap-vlan-modes.patch
@@ -0,0 +1,25 @@
+Subject: mac80211: allow AP and VLAN modes
+
+This patch allows switching interfaces into AP/VLAN modes using
+cfg80211 (nl80211). Don't allow doing it with wext because then
+people will just attempt to do it manually (without hostapd) and
+complain that it doesn't work.
+
+Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
+---
+ net/mac80211/cfg.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- everything.orig/net/mac80211/cfg.c 2008-08-06 21:38:13.000000000 +0200
++++ everything/net/mac80211/cfg.c 2008-08-06 21:38:24.000000000 +0200
+@@ -33,6 +33,10 @@ nl80211_type_to_mac80211_type(enum nl802
+ case NL80211_IFTYPE_MESH_POINT:
+ return IEEE80211_IF_TYPE_MESH_POINT;
+ #endif
++ case NL80211_IFTYPE_AP:
++ return IEEE80211_IF_TYPE_AP;
++ case NL80211_IFTYPE_AP_VLAN:
++ return IEEE80211_IF_TYPE_VLAN;
+ case NL80211_IFTYPE_WDS:
+ return IEEE80211_IF_TYPE_WDS;
+ default: