1 files changed, 0 insertions, 396 deletions
diff --git a/package/mac80211/patches/007-remove_unused_stuff.patch b/package/mac80211/patches/007-remove_unused_stuff.patch
deleted file mode 100644
index 5f6fbf971..000000000
--- a/package/mac80211/patches/007-remove_unused_stuff.patch
+++ /dev/null
@@ -1,396 +0,0 @@
---- a/config.mk
-+++ b/config.mk
-@@ -153,77 +153,77 @@ CONFIG_CFG80211_DEFAULT_PS=y
- CONFIG_CFG80211_DEFAULT_PS_VALUE=1
- # CONFIG_CFG80211_REG_DEBUG=y
- 
--CONFIG_LIB80211=m
--CONFIG_LIB80211_CRYPT_WEP=m
--CONFIG_LIB80211_CRYPT_CCMP=m
--CONFIG_LIB80211_CRYPT_TKIP=m
-+# CONFIG_LIB80211=m
-+# CONFIG_LIB80211_CRYPT_WEP=m
-+# CONFIG_LIB80211_CRYPT_CCMP=m
-+# CONFIG_LIB80211_CRYPT_TKIP=m
- # CONFIG_LIB80211_DEBUG=y
- 
- CONFIG_WIRELESS_OLD_REGULATORY=n
- 
- # mac80211 test driver
--CONFIG_MAC80211_HWSIM=m
-+# CONFIG_MAC80211_HWSIM=m
- 
- # PCI Drivers
- ifneq ($(CONFIG_PCI),)
- 
--CONFIG_ATH5K=m
-+# CONFIG_ATH5K=m
- # CONFIG_ATH5K_DEBUG=y
--CONFIG_ATH5K_RFKILL=y
--CONFIG_ATH9K=m
-+# CONFIG_ATH5K_RFKILL=y
-+# CONFIG_ATH9K=m
- # CONFIG_ATH9K_DEBUG=y
- 
- 
--CONFIG_IWLWIFI=m
--CONFIG_IWLWIFI_LEDS=y
--CONFIG_IWLWIFI_RFKILL=y
--CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y
-+# CONFIG_IWLWIFI=m
-+# CONFIG_IWLWIFI_LEDS=y
-+# CONFIG_IWLWIFI_RFKILL=y
-+# CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y
- # CONFIG_IWLWIFI_DEBUG=y
- # CONFIG_IWLWIFI_DEBUGFS=y
--CONFIG_IWLAGN=m
--CONFIG_COMPAT_IWL4965=y
--CONFIG_IWL5000=y
--CONFIG_IWL3945=m
--CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
-+# CONFIG_IWLAGN=m
-+# CONFIG_COMPAT_IWL4965=y
-+# CONFIG_IWL5000=y
-+# CONFIG_IWL3945=m
-+# CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
- 
- 
--CONFIG_B43=m
--CONFIG_B43_HWRNG=y
--CONFIG_B43_PCI_AUTOSELECT=y
--CONFIG_B43_PCICORE_AUTOSELECT=y
--CONFIG_B43_PCMCIA=y
--CONFIG_B43_PIO=y
--CONFIG_B43_LEDS=y
--CONFIG_B43_RFKILL=y
-+# CONFIG_B43=m
-+# CONFIG_B43_HWRNG=y
-+# CONFIG_B43_PCI_AUTOSELECT=y
-+# CONFIG_B43_PCICORE_AUTOSELECT=y
-+# CONFIG_B43_PCMCIA=y
-+# CONFIG_B43_PIO=y
-+# CONFIG_B43_LEDS=y
-+# CONFIG_B43_RFKILL=y
- # CONFIG_B43_DEBUG=y
- # CONFIG_B43_FORCE_PIO=y
- 
--CONFIG_B43LEGACY=m
--CONFIG_B43LEGACY_HWRNG=y
--CONFIG_B43LEGACY_PCI_AUTOSELECT=y
--CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
--CONFIG_B43LEGACY_LEDS=y
--CONFIG_B43LEGACY_RFKILL=y
-+# CONFIG_B43LEGACY=m
-+# CONFIG_B43LEGACY_HWRNG=y
-+# CONFIG_B43LEGACY_PCI_AUTOSELECT=y
-+# CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
-+# CONFIG_B43LEGACY_LEDS=y
-+# CONFIG_B43LEGACY_RFKILL=y
- # CONFIG_B43LEGACY_DEBUG=y
- CONFIG_B43LEGACY_DMA=y
--CONFIG_B43LEGACY_PIO=y
--CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
--# CONFIG_B43LEGACY_DMA_MODE=y
-+# CONFIG_B43LEGACY_PIO=y
-+# CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
-+CONFIG_B43LEGACY_DMA_MODE=y
- # CONFIG_B43LEGACY_PIO_MODE=y
- 
- # The Intel ipws
--CONFIG_LIBIPW=m
-+# CONFIG_LIBIPW=m
- # CONFIG_LIBIPW_DEBUG=y
- 
- 
--CONFIG_IPW2100=m
--CONFIG_IPW2100_MONITOR=y
-+# CONFIG_IPW2100=m
-+# CONFIG_IPW2100_MONITOR=y
- # CONFIG_IPW2100_DEBUG=y
--CONFIG_IPW2200=m
--CONFIG_IPW2200_MONITOR=y
--CONFIG_IPW2200_RADIOTAP=y
--CONFIG_IPW2200_PROMISCUOUS=y
--CONFIG_IPW2200_QOS=y
-+# CONFIG_IPW2200=m
-+# CONFIG_IPW2200_MONITOR=y
-+# CONFIG_IPW2200_RADIOTAP=y
-+# CONFIG_IPW2200_PROMISCUOUS=y
-+# CONFIG_IPW2200_QOS=y
- # CONFIG_IPW2200_DEBUG=y
- # The above enables use a second interface prefixed 'rtap'.
- #           Example usage:
-@@ -238,46 +238,46 @@ CONFIG_IPW2200_QOS=y
- #
- # % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface
- 
--CONFIG_SSB_BLOCKIO=y
--CONFIG_SSB_PCIHOST_POSSIBLE=y
--CONFIG_SSB_PCIHOST=y
--CONFIG_SSB_B43_PCI_BRIDGE=y
--CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
--CONFIG_SSB_PCMCIAHOST=y
-+# CONFIG_SSB_BLOCKIO=y
-+# CONFIG_SSB_PCIHOST_POSSIBLE=y
-+# CONFIG_SSB_PCIHOST=y
-+# CONFIG_SSB_B43_PCI_BRIDGE=y
-+# CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
-+# CONFIG_SSB_PCMCIAHOST=y
- # CONFIG_SSB_DEBUG=y
--CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
--CONFIG_SSB_DRIVER_PCICORE=y
-+# CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-+# CONFIG_SSB_DRIVER_PCICORE=y
- 
--CONFIG_P54_PCI=m
-+# CONFIG_P54_PCI=m
- 
--CONFIG_B44=m
--CONFIG_B44_PCI_AUTOSELECT=y
--CONFIG_B44_PCICORE_AUTOSELECT=y
--CONFIG_B44_PCI=y
-+# CONFIG_B44=m
-+# CONFIG_B44_PCI_AUTOSELECT=y
-+# CONFIG_B44_PCICORE_AUTOSELECT=y
-+# CONFIG_B44_PCI=y
- 
--CONFIG_RTL8180=m
-+# CONFIG_RTL8180=m
- 
--CONFIG_ADM8211=m
--CONFIG_PCMCIA_ATMEL=m
-+# CONFIG_ADM8211=m
-+# CONFIG_PCMCIA_ATMEL=m
- 
--CONFIG_RT2X00_LIB_PCI=m
--CONFIG_RT2400PCI=m
--CONFIG_RT2500PCI=m
--CONFIG_RT2800PCI=m
-+# CONFIG_RT2X00_LIB_PCI=m
-+# CONFIG_RT2400PCI=m
-+# CONFIG_RT2500PCI=m
-+# CONFIG_RT2800PCI=m
- NEED_RT2X00=y
- 
- # Two rt2x00 drivers require firmware: rt61pci and rt73usb. They depend on
- # CRC to check the firmware. We check here first for the PCI
- # driver as we're in the PCI section.
- ifneq ($(CONFIG_CRC_ITU_T),)
--CONFIG_RT61PCI=m
-+# CONFIG_RT61PCI=m
- NEED_RT2X00_FIRMWARE=y
- endif
- 
--CONFIG_ATMEL=m
--CONFIG_PCI_ATMEL=m
-+# CONFIG_ATMEL=m
-+# CONFIG_PCI_ATMEL=m
- 
--CONFIG_MWL8K=m
-+# CONFIG_MWL8K=m
- 
- endif
- ## end of PCI
-@@ -285,22 +285,22 @@ endif
- ifneq ($(CONFIG_PCMCIA),)
- 
- ifeq ($(shell test $(KERNEL_SUBLEVEL) -le 26 && echo yes),yes)
--CONFIG_LIBERTAS=n
--CONFIG_LIBERTAS_CS=n
-+# CONFIG_LIBERTAS=n
-+# CONFIG_LIBERTAS_CS=n
- else
--CONFIG_LIBERTAS_CS=m
--NEED_LIBERTAS=y
-+# CONFIG_LIBERTAS_CS=m
-+# NEED_LIBERTAS=y
- endif
- 
- endif
- ## end of PCMCIA
- 
- # This is required for some cards
--CONFIG_EEPROM_93CX6=m
-+# CONFIG_EEPROM_93CX6=m
- 
- # USB Drivers
- ifneq ($(CONFIG_USB),)
--CONFIG_ZD1211RW=m
-+# CONFIG_ZD1211RW=m
- # CONFIG_ZD1211RW_DEBUG=y
- 
- # Sorry, rndis_wlan uses cancel_work_sync which is new and can't be done in compat...
-@@ -310,55 +310,55 @@ CONFIG_ZD1211RW=m
- # is only wireless RNDIS chip known to date.
- # Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER
- # it also requires new RNDIS_HOST and CDC_ETHER modules which we add
--CONFIG_USB_NET_RNDIS_HOST=m
--CONFIG_USB_NET_RNDIS_WLAN=m
--CONFIG_USB_NET_CDCETHER=m
-+# CONFIG_USB_NET_RNDIS_HOST=m
-+# CONFIG_USB_NET_RNDIS_WLAN=m
-+# CONFIG_USB_NET_CDCETHER=m
- 
- 
--CONFIG_P54_USB=m
--CONFIG_RTL8187=m
-+# CONFIG_P54_USB=m
-+# CONFIG_RTL8187=m
- 
--CONFIG_AT76C50X_USB=m
-+# CONFIG_AT76C50X_USB=m
- 
- ifeq ($(shell test $(KERNEL_SUBLEVEL) -ge 28 && echo yes),yes)
--CONFIG_AR9170_USB=m
--CONFIG_AR9170_LEDS=y
-+# CONFIG_AR9170_USB=m
-+# CONFIG_AR9170_LEDS=y
- endif
- 
- # RT2500USB does not require firmware
--CONFIG_RT2500USB=m
--CONFIG_RT2800USB=m
--CONFIG_RT2X00_LIB_USB=m
-+# CONFIG_RT2500USB=m
-+# CONFIG_RT2800USB=m
-+# CONFIG_RT2X00_LIB_USB=m
- NEED_RT2X00=y
- # RT73USB requires firmware
- ifneq ($(CONFIG_CRC_ITU_T),)
--CONFIG_RT73USB=m
-+# CONFIG_RT73USB=m
- NEED_RT2X00_FIRMWARE=y
- endif
- 
- ifeq ($(shell test $(KERNEL_SUBLEVEL) -le 26 && echo yes),yes)
--CONFIG_LIBERTAS_THINFIRM_USB=n
--CONFIG_LIBERTAS_USB=n
--NEED_LIBERTAS=n
-+# CONFIG_LIBERTAS_THINFIRM_USB=n
-+# CONFIG_LIBERTAS_USB=n
-+# NEED_LIBERTAS=n
- else
--CONFIG_LIBERTAS_THINFIRM_USB=m
--CONFIG_LIBERTAS_USB=m
--NEED_LIBERTAS=y
-+# CONFIG_LIBERTAS_THINFIRM_USB=m
-+# CONFIG_LIBERTAS_USB=m
-+# NEED_LIBERTAS=y
- endif
- 
- endif # end of USB driver list
- 
- ifneq ($(CONFIG_SPI_MASTER),)
- 
--CONFIG_WL1251=m
--CONFIG_P54_SPI=m
-+# CONFIG_WL1251=m
-+# CONFIG_P54_SPI=m
- 
- ifeq ($(shell test $(KERNEL_SUBLEVEL) -le 26 && echo yes),yes)
--CONFIG_LIBERTAS_SPI=n
--NEED_LIBERTAS=n
-+# CONFIG_LIBERTAS_SPI=n
-+# NEED_LIBERTAS=n
- else
--CONFIG_LIBERTAS_SPI=m
--NEED_LIBERTAS=y
-+# CONFIG_LIBERTAS_SPI=m
-+# NEED_LIBERTAS=y
- endif
- 
- endif # end of SPI driver list
-@@ -366,17 +366,17 @@ endif # end of SPI driver list
- ifneq ($(CONFIG_MMC),)
- 
- ifeq ($(shell test $(KERNEL_SUBLEVEL) -le 26 && echo yes),yes)
--CONFIG_LIBERTAS_SDIO=n
--NEED_LIBERTAS=n
-+# CONFIG_LIBERTAS_SDIO=n
-+# NEED_LIBERTAS=n
- else
--CONFIG_LIBERTAS_SDIO=m
--NEED_LIBERTAS=y
-+# CONFIG_LIBERTAS_SDIO=m
-+# NEED_LIBERTAS=y
- endif
- 
- # Activate iwmc3200wifi support only on kernel >= 2.6.29.
- # iwmc3200wifi uses new netdev_ops api no supported by old kernel.
- ifeq ($(shell test $(KERNEL_SUBLEVEL) -ge 29 && echo yes),yes)
--CONFIG_IWM=m
-+# CONFIG_IWM=m
- # CONFIG_IWM_DEBUG=y
- endif
- 
-@@ -384,12 +384,12 @@ endif # end of SDIO driver list
- 
- # Common rt2x00 requirements
- ifeq ($(NEED_RT2X00),y)
--CONFIG_RT2X00=m
-+# CONFIG_RT2X00=m
- CONFIG_RT2X00_LIB=m
- CONFIG_RT2X00_LIB_HT=y
- CONFIG_RT2X00_LIB_FIRMWARE=y
- CONFIG_RT2X00_LIB_CRYPTO=y
--CONFIG_RT2X00_LIB_RFKILL=y
-+# CONFIG_RT2X00_LIB_RFKILL=y
- CONFIG_RT2X00_LIB_LEDS=y
- # CONFIG_RT2X00_LIB_DEBUGFS=y
- # CONFIG_RT2X00_DEBUG=y
-@@ -400,30 +400,30 @@ CONFIG_RT2X00_LIB_FIRMWARE=y
- endif
- 
- # p54
--CONFIG_P54_COMMON=m
-+# CONFIG_P54_COMMON=m
- CONFIG_P54_LEDS=y
- 
- # Atheros
--CONFIG_ATH_COMMON=m
-+# CONFIG_ATH_COMMON=m
- 
--CONFIG_WL12XX=y
--CONFIG_WL1251=m
--CONFIG_WL1251_SPI=m
--CONFIG_WL1251_SDIO=m
--CONFIG_WL1271=m
-+# CONFIG_WL12XX=y
-+# CONFIG_WL1251=m
-+# CONFIG_WL1251_SPI=m
-+# CONFIG_WL1251_SDIO=m
-+# CONFIG_WL1271=m
- 
- # Sonics Silicon Backplane
--CONFIG_SSB_POSSIBLE=y
--CONFIG_SSB=m
--CONFIG_SSB_SPROM=y
-+# CONFIG_SSB_POSSIBLE=y
-+# CONFIG_SSB=m
-+# CONFIG_SSB_SPROM=y
- # CONFIG_SSB_DEBUG=y
- 
- ifeq ($(shell test $(KERNEL_SUBLEVEL) -le 26 && echo yes),yes)
--CONFIG_LIBERTAS=n
-+# CONFIG_LIBERTAS=n
- else
- ifeq ($(NEED_LIBERTAS),y)
--CONFIG_LIBERTAS_THINFIRM=m
--CONFIG_LIBERTAS=m
-+# CONFIG_LIBERTAS_THINFIRM=m
-+# CONFIG_LIBERTAS=m
- # CONFIG_LIBERTAS_DEBUG=y
- endif
- endif
-@@ -431,8 +431,8 @@ endif
- # We need the backported rfkill module on kernel < 2.6.31.
- # In more recent kernel versions use the in kernel rfkill module.
- ifeq ($(shell test $(KERNEL_SUBLEVEL) -le 30 && echo yes),yes)
--CONFIG_RFKILL_BACKPORT=m
--CONFIG_RFKILL_BACKPORT_LEDS=y
--CONFIG_RFKILL_BACKPORT_INPUT=y
-+# CONFIG_RFKILL_BACKPORT=m
-+# CONFIG_RFKILL_BACKPORT_LEDS=y
-+# CONFIG_RFKILL_BACKPORT_INPUT=y
- endif
-