diff options
Diffstat (limited to 'package/mac80211/patches/000-kconfig.patch')
| -rw-r--r-- | package/mac80211/patches/000-kconfig.patch | 201 |
1 files changed, 0 insertions, 201 deletions
diff --git a/package/mac80211/patches/000-kconfig.patch b/package/mac80211/patches/000-kconfig.patch deleted file mode 100644 index bcbf8868b..000000000 --- a/package/mac80211/patches/000-kconfig.patch +++ /dev/null @@ -1,201 +0,0 @@ ---- /dev/null -+++ b/net/mac80211/Kconfig -@@ -0,0 +1,198 @@ -+config MAC80211 -+ tristate "Generic IEEE 802.11 Networking Stack (mac80211)" -+ select CRYPTO -+ select CRYPTO_ECB -+ select CRYPTO_ARC4 -+ select CRYPTO_AES -+ select CRC32 -+ select WIRELESS_EXT -+ select CFG80211 -+ ---help--- -+ This option enables the hardware independent IEEE 802.11 -+ networking stack. -+ -+menu "Rate control algorithm selection" -+ depends on MAC80211 != n -+ -+config MAC80211_RC_PID -+ bool "PID controller based rate control algorithm" if EMBEDDED -+ default y -+ ---help--- -+ This option enables a TX rate control algorithm for -+ mac80211 that uses a PID controller to select the TX -+ rate. -+ -+choice -+ prompt "Default rate control algorithm" -+ default MAC80211_RC_DEFAULT_PID -+ ---help--- -+ This option selects the default rate control algorithm -+ mac80211 will use. Note that this default can still be -+ overriden through the ieee80211_default_rc_algo module -+ parameter if different algorithms are available. -+ -+config MAC80211_RC_DEFAULT_PID -+ bool "PID controller based rate control algorithm" -+ depends on MAC80211_RC_PID -+ ---help--- -+ Select the PID controller based rate control as the -+ default rate control algorithm. You should choose -+ this unless you know what you are doing. -+ -+endchoice -+ -+config MAC80211_RC_DEFAULT -+ string -+ default "pid" if MAC80211_RC_DEFAULT_PID -+ default "" -+ -+endmenu -+ -+config MAC80211_MESH -+ bool "Enable mac80211 mesh networking (pre-802.11s) support" -+ depends on MAC80211 && EXPERIMENTAL -+ ---help--- -+ This options enables support of Draft 802.11s mesh networking. -+ The implementation is based on Draft 1.08 of the Mesh Networking -+ amendment. For more information visit http://o11s.org/. -+ -+ -+config MAC80211_LEDS -+ bool "Enable LED triggers" -+ depends on MAC80211 -+ select NEW_LEDS -+ select LEDS_TRIGGERS -+ ---help--- -+ This option enables a few LED triggers for different -+ packet receive/transmit events. -+ -+config MAC80211_DEBUGFS -+ bool "Export mac80211 internals in DebugFS" -+ depends on MAC80211 && DEBUG_FS -+ ---help--- -+ Select this to see extensive information about -+ the internal state of mac80211 in debugfs. -+ -+ Say N unless you know you need this. -+ -+menuconfig MAC80211_DEBUG_MENU -+ bool "Select mac80211 debugging features" -+ depends on MAC80211 -+ ---help--- -+ This option collects various mac80211 debug settings. -+ -+config MAC80211_DEBUG_PACKET_ALIGNMENT -+ bool "Enable packet alignment debugging" -+ depends on MAC80211_DEBUG_MENU -+ ---help--- -+ This option is recommended for driver authors and strongly -+ discouraged for everybody else, it will trigger a warning -+ when a driver hands mac80211 a buffer that is aligned in -+ a way that will cause problems with the IP stack on some -+ architectures. -+ -+ Say N unless you're writing a mac80211 based driver. -+ -+config MAC80211_NOINLINE -+ bool "Do not inline TX/RX handlers" -+ depends on MAC80211_DEBUG_MENU -+ ---help--- -+ This option affects code generation in mac80211, when -+ selected some functions are marked "noinline" to allow -+ easier debugging of problems in the transmit and receive -+ paths. -+ -+ This option increases code size a bit and inserts a lot -+ of function calls in the code, but is otherwise safe to -+ enable. -+ -+ If unsure, say N unless you expect to be finding problems -+ in mac80211. -+ -+config MAC80211_VERBOSE_DEBUG -+ bool "Verbose debugging output" -+ depends on MAC80211_DEBUG_MENU -+ ---help--- -+ Selecting this option causes mac80211 to print out -+ many debugging messages. It should not be selected -+ on production systems as some of the messages are -+ remotely triggerable. -+ -+ Do not select this option. -+ -+config MAC80211_HT_DEBUG -+ bool "Verbose HT debugging" -+ depends on MAC80211_DEBUG_MENU -+ ---help--- -+ This option enables 802.11n High Throughput features -+ debug tracing output. -+ -+ It should not be selected on production systems as some -+ of the messages are remotely triggerable. -+ -+ Do not select this option. -+ -+config MAC80211_TKIP_DEBUG -+ bool "Verbose TKIP debugging" -+ depends on MAC80211_DEBUG_MENU -+ ---help--- -+ Selecting this option causes mac80211 to print out -+ very verbose TKIP debugging messages. It should not -+ be selected on production systems as those messages -+ are remotely triggerable. -+ -+ Do not select this option. -+ -+config MAC80211_IBSS_DEBUG -+ bool "Verbose IBSS debugging" -+ depends on MAC80211_DEBUG_MENU -+ ---help--- -+ Selecting this option causes mac80211 to print out -+ very verbose IBSS debugging messages. It should not -+ be selected on production systems as those messages -+ are remotely triggerable. -+ -+ Do not select this option. -+ -+config MAC80211_VERBOSE_PS_DEBUG -+ bool "Verbose powersave mode debugging" -+ depends on MAC80211_DEBUG_MENU -+ ---help--- -+ Selecting this option causes mac80211 to print out very -+ verbose power save mode debugging messages (when mac80211 -+ is an AP and has power saving stations.) -+ It should not be selected on production systems as those -+ messages are remotely triggerable. -+ -+ Do not select this option. -+ -+config MAC80211_VERBOSE_MPL_DEBUG -+ bool "Verbose mesh peer link debugging" -+ depends on MAC80211_DEBUG_MENU -+ depends on MAC80211_MESH -+ ---help--- -+ Selecting this option causes mac80211 to print out very -+ verbose mesh peer link debugging messages (when mac80211 -+ is taking part in a mesh network). -+ It should not be selected on production systems as those -+ messages are remotely triggerable. -+ -+ Do not select this option. -+ -+config MAC80211_DEBUG_COUNTERS -+ bool "Extra statistics for TX/RX debugging" -+ depends on MAC80211_DEBUG_MENU -+ depends on MAC80211_DEBUGFS -+ ---help--- -+ Selecting this option causes mac80211 to keep additional -+ and very verbose statistics about TX and RX handler use -+ and show them in debugfs. -+ -+ If unsure, say N. -+ -+config MAC80211_VERBOSE_SPECT_MGMT_DEBUG -+ bool "Verbose Spectrum Management (IEEE 802.11h)debugging" -+ depends on MAC80211_DEBUG_MENU -+ ---help--- -+ Say Y here to print out verbose Spectrum Management (IEEE 802.11h) -+ debug messages. |