diff options
Diffstat (limited to 'package/mac80211/patches-brcm')
3 files changed, 480 insertions, 0 deletions
diff --git a/package/mac80211/patches-brcm/001-disable_drivers.patch b/package/mac80211/patches-brcm/001-disable_drivers.patch new file mode 100644 index 000000000..a2949d771 --- /dev/null +++ b/package/mac80211/patches-brcm/001-disable_drivers.patch @@ -0,0 +1,159 @@ +--- compat-wireless-2008-08-06/config.mk 2008-07-18 06:11:03.000000000 +0200 ++++ compat-wireless-2008-08-06-new/config.mk 2008-11-09 13:16:02.000000000 +0100 +@@ -72,69 +72,31 @@ + CONFIG_ATH5K=m + CONFIG_ATH5K_DEBUG=n + +-# Required for older kernels which still use this flag. +-CONFIG_IWLWIFI=m +- +-CONFIG_IWLCORE=m +-CONFIG_IWL3945=m +-CONFIG_IWL4965=m +-CONFIG_IWL4965_HT=y + CONFIG_B43=m ++CONFIG_B43_NPHY=y + # B43 uses PCMCIA only for Compact Flash. The Cardbus cards uses PCI + # Example, bcm4318: + # http://www.multicap.biz/wireless-lan/indoor-wlan-hardware/sdc-cf10g-80211g-compact-flash-module +-CONFIG_B43_PCMCIA=y ++# CONFIG_B43_PCMCIA=y + CONFIG_B43_DMA=y +-CONFIG_B43_PIO=y ++# CONFIG_B43_PIO=y + # B43_PIO selects SSB_BLOCKIO +-CONFIG_SSB_BLOCKIO=y +-CONFIG_B43_DMA_AND_PIO_MODE=y +-CONFIG_B43_PCI_AUTOSELECT=y +-CONFIG_B43_PCICORE_AUTOSELECT=y +-#CONFIG_B43_RFKILL=n ++# CONFIG_SSB_BLOCKIO=y ++# CONFIG_B43_DMA_AND_PIO_MODE=y ++# CONFIG_B43_PCI_AUTOSELECT=y ++# CONFIG_B43_PCICORE_AUTOSELECT=y ++CONFIG_B43_RFKILL=y + CONFIG_B43_LEDS=y + # CONFIG_B43_DEBUG is not set + + CONFIG_B43LEGACY=m +-CONFIG_B43LEGACY_PCI_AUTOSELECT=y +-CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y ++CONFIG_B43LEGACY_RFKILL=y ++CONFIG_B43LEGACY_LEDS=y ++# CONFIG_B43LEGACY_PCI_AUTOSELECT=y ++# CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y + CONFIG_B43LEGACY_DMA=y +-CONFIG_B43LEGACY_PIO=y +-CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y +- +-# The Intel ipws +-CONFIG_IPW2100=m +-CONFIG_IPW2100_MONITOR=y +-CONFIG_IPW2200=m +-CONFIG_IPW2200_MONITOR=y +-CONFIG_IPW2200_RADIOTAP=y +-CONFIG_IPW2200_PROMISCUOUS=y +-# The above enables use a second interface prefixed 'rtap'. +-# Example usage: +-# +-# % modprobe ipw2200 rtap_iface=1 +-# % ifconfig rtap0 up +-# % tethereal -i rtap0 +-# +-# If you do not specify 'rtap_iface=1' as a module parameter then +-# the rtap interface will not be created and you will need to turn +-# it on via sysfs: +-# +-# % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface +-CONFIG_IPW2200_QOS=y +- +-NEED_IEEE80211=y +- +-CONFIG_P54_PCI=m +- +-CONFIG_SSB_PCIHOST_POSSIBLE=y +-CONFIG_SSB_PCIHOST=y +-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y +-CONFIG_SSB_DRIVER_PCICORE=y +-CONFIG_SSB_B43_PCI_BRIDGE=y +- +-CONFIG_RTL8180=m +-CONFIG_ADM8211=m ++# CONFIG_B43LEGACY_PIO=y ++# CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y + + CONFIG_RT2X00_LIB_PCI=m + CONFIG_RT2400PCI=m +@@ -159,32 +121,6 @@ + ifneq ($(CONFIG_USB),) + CONFIG_ZD1211RW=m + +-# support for USB Wireless devices using Atmel at76c503, +-# at76c505 or at76c505a chips. +-CONFIG_USB_ATMEL=m +- +-# Stuff here things which depend on kernel versions for USB +-ifeq ($(shell test -e $(KLIB_BUILD)/Makefile && echo yes),yes) +-KERNEL_SUBLEVEL = $(shell $(MAKE) -C $(KLIB_BUILD) kernelversion | sed -n 's/^2\.6\.\([0-9]\+\).*/\1/p') +-ifeq ($(shell test $(KERNEL_SUBLEVEL) -gt 21 && echo yes),yes) +- +-# Sorry, rndis_wlan uses cancel_work_sync which is new and can't be done in compat... +- +-# Wireless RNDIS USB support (RTL8185 802.11g) A-Link WL54PC +-# All of these devices are based on Broadcom 4320 chip which +-# is only wireless RNDIS chip known to date. +-# Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER +-# it also requires new RNDIS_HOST and CDC_ETHER modules which we add +-CONFIG_USB_NET_RNDIS_HOST=m +-CONFIG_USB_NET_RNDIS_WLAN=m +-CONFIG_USB_NET_CDCETHER=m +- +-endif +-endif +- +-CONFIG_P54_USB=m +-CONFIG_RTL8187=m +- + # RT2500USB does not require firmware + CONFIG_RT2500USB=m + CONFIG_RT2X00_LIB_USB=m +@@ -209,39 +145,6 @@ + CONFIG_RT2X00_LIB_FIRMWARE=y + endif + +-# p54 +-CONFIG_P54_COMMON=m +- +-# Sonics Silicon Backplane +-CONFIG_SSB_POSSIBLE=y +-CONFIG_SSB=m +-CONFIG_SSB_SPROM=y +- +-ifneq ($(CONFIG_PCMCIA),) +-CONFIG_SSB_PCMCIAHOST=y +-endif +- +-# These two are for mips +-CONFIG_SSB_DRIVER_MIPS=n +-CONFIG_SSB_PCICORE_HOSTMODE=n +-# CONFIG_SSB_DEBUG is not set +-# CONFIG_SSB_DRIVER_EXTIF=y +- +-ifneq ($(CONFIG_USB),) +-CONFIG_LIBERTAS_USB=m +-NEED_LIBERTAS=y +-endif +-ifneq ($(CONFIG_PCMCIA),) +-CONFIG_LIBERTAS_CS=m +-NEED_LIBERTAS=y +-endif +-ifeq ($(NEED_LIBERTAS),y) +-CONFIG_LIBERTAS=m +-# Libertas uses the old stack but not fully, it will soon +-# be cleaned. +-NEED_IEEE80211=y +-endif +- + ifeq ($(NEED_IEEE80211),y) + # Old ieee80211 "stack" + # Note: old softmac is scheduled for removal so we diff --git a/package/mac80211/patches-brcm/002-ssb-backport.patch b/package/mac80211/patches-brcm/002-ssb-backport.patch new file mode 100644 index 000000000..a57143ae1 --- /dev/null +++ b/package/mac80211/patches-brcm/002-ssb-backport.patch @@ -0,0 +1,296 @@ +This patch backports the interface of the b43 and b43legacy driver from +the new to the old ssb API. This patch is needed as long the old ssb +version is used in the kernel for broadcom devices. After upgrading to +ssb version out of kernel 2.6.27 or later this patch is not needed any more. + +diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c +index 098f886..8a09a1d 100644 +--- a/drivers/net/wireless/b43/dma.c ++++ b/drivers/net/wireless/b43/dma.c +@@ -328,11 +328,11 @@ static inline + dma_addr_t dmaaddr; + + if (tx) { +- dmaaddr = ssb_dma_map_single(ring->dev->dev, +- buf, len, DMA_TO_DEVICE); ++ dmaaddr = dma_map_single(ring->dev->dev->dma_dev, ++ buf, len, DMA_TO_DEVICE); + } else { +- dmaaddr = ssb_dma_map_single(ring->dev->dev, +- buf, len, DMA_FROM_DEVICE); ++ dmaaddr = dma_map_single(ring->dev->dev->dma_dev, ++ buf, len, DMA_FROM_DEVICE); + } + + return dmaaddr; +@@ -343,11 +343,11 @@ static inline + dma_addr_t addr, size_t len, int tx) + { + if (tx) { +- ssb_dma_unmap_single(ring->dev->dev, +- addr, len, DMA_TO_DEVICE); ++ dma_unmap_single(ring->dev->dev->dma_dev, ++ addr, len, DMA_TO_DEVICE); + } else { +- ssb_dma_unmap_single(ring->dev->dev, +- addr, len, DMA_FROM_DEVICE); ++ dma_unmap_single(ring->dev->dev->dma_dev, ++ addr, len, DMA_FROM_DEVICE); + } + } + +@@ -356,8 +356,8 @@ static inline + dma_addr_t addr, size_t len) + { + B43_WARN_ON(ring->tx); +- ssb_dma_sync_single_for_cpu(ring->dev->dev, +- addr, len, DMA_FROM_DEVICE); ++ dma_sync_single_for_cpu(ring->dev->dev->dma_dev, ++ addr, len, DMA_FROM_DEVICE); + } + + static inline +@@ -365,8 +365,8 @@ static inline + dma_addr_t addr, size_t len) + { + B43_WARN_ON(ring->tx); +- ssb_dma_sync_single_for_device(ring->dev->dev, +- addr, len, DMA_FROM_DEVICE); ++ dma_sync_single_for_device(ring->dev->dev->dma_dev, ++ addr, len, DMA_FROM_DEVICE); + } + + static inline +@@ -381,6 +381,7 @@ static inline + + static int alloc_ringmemory(struct b43_dmaring *ring) + { ++ struct device *dma_dev = ring->dev->dev->dma_dev; + gfp_t flags = GFP_KERNEL; + + /* The specs call for 4K buffers for 30- and 32-bit DMA with 4K +@@ -391,14 +392,11 @@ static int alloc_ringmemory(struct b43_dmaring *ring) + * For unknown reasons - possibly a hardware error - the BCM4311 rev + * 02, which uses 64-bit DMA, needs the ring buffer in very low memory, + * which accounts for the GFP_DMA flag below. +- * +- * The flags here must match the flags in free_ringmemory below! + */ + if (ring->type == B43_DMA_64BIT) + flags |= GFP_DMA; +- ring->descbase = ssb_dma_alloc_consistent(ring->dev->dev, +- B43_DMA_RINGMEMSIZE, +- &(ring->dmabase), flags); ++ ring->descbase = dma_alloc_coherent(dma_dev, B43_DMA_RINGMEMSIZE, ++ &(ring->dmabase), flags); + if (!ring->descbase) { + b43err(ring->dev->wl, "DMA ringmemory allocation failed\n"); + return -ENOMEM; +@@ -410,13 +408,10 @@ static int alloc_ringmemory(struct b43_dmaring *ring) + + static void free_ringmemory(struct b43_dmaring *ring) + { +- gfp_t flags = GFP_KERNEL; +- +- if (ring->type == B43_DMA_64BIT) +- flags |= GFP_DMA; ++ struct device *dma_dev = ring->dev->dev->dma_dev; + +- ssb_dma_free_consistent(ring->dev->dev, B43_DMA_RINGMEMSIZE, +- ring->descbase, ring->dmabase, flags); ++ dma_free_coherent(dma_dev, B43_DMA_RINGMEMSIZE, ++ ring->descbase, ring->dmabase); + } + + /* Reset the RX DMA channel */ +@@ -523,7 +518,7 @@ static bool b43_dma_mapping_error(struct b43_dmaring *ring, + dma_addr_t addr, + size_t buffersize, bool dma_to_device) + { +- if (unlikely(ssb_dma_mapping_error(ring->dev->dev, addr))) ++ if (unlikely(dma_mapping_error(addr))) + return 1; + + switch (ring->type) { +@@ -849,10 +844,10 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev, + goto err_kfree_meta; + + /* test for ability to dma to txhdr_cache */ +- dma_test = ssb_dma_map_single(dev->dev, +- ring->txhdr_cache, +- b43_txhdr_size(dev), +- DMA_TO_DEVICE); ++ dma_test = dma_map_single(dev->dev->dma_dev, ++ ring->txhdr_cache, ++ b43_txhdr_size(dev), ++ DMA_TO_DEVICE); + + if (b43_dma_mapping_error(ring, dma_test, + b43_txhdr_size(dev), 1)) { +@@ -864,10 +859,10 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev, + if (!ring->txhdr_cache) + goto err_kfree_meta; + +- dma_test = ssb_dma_map_single(dev->dev, +- ring->txhdr_cache, +- b43_txhdr_size(dev), +- DMA_TO_DEVICE); ++ dma_test = dma_map_single(dev->dev->dma_dev, ++ ring->txhdr_cache, ++ b43_txhdr_size(dev), ++ DMA_TO_DEVICE); + + if (b43_dma_mapping_error(ring, dma_test, + b43_txhdr_size(dev), 1)) { +@@ -878,9 +873,9 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev, + } + } + +- ssb_dma_unmap_single(dev->dev, +- dma_test, b43_txhdr_size(dev), +- DMA_TO_DEVICE); ++ dma_unmap_single(dev->dev->dma_dev, ++ dma_test, b43_txhdr_size(dev), ++ DMA_TO_DEVICE); + } + + err = alloc_ringmemory(ring); +diff --git a/drivers/net/wireless/b43legacy/dma.c b/drivers/net/wireless/b43legacy/dma.c +index fb6819e..87b1049 100644 +--- a/drivers/net/wireless/b43legacy/dma.c ++++ b/drivers/net/wireless/b43legacy/dma.c +@@ -393,13 +393,13 @@ dma_addr_t map_descbuffer(struct b43legacy_dmaring *ring, + dma_addr_t dmaaddr; + + if (tx) +- dmaaddr = ssb_dma_map_single(ring->dev->dev, +- buf, len, +- DMA_TO_DEVICE); ++ dmaaddr = dma_map_single(ring->dev->dev->dma_dev, ++ buf, len, ++ DMA_TO_DEVICE); + else +- dmaaddr = ssb_dma_map_single(ring->dev->dev, +- buf, len, +- DMA_FROM_DEVICE); ++ dmaaddr = dma_map_single(ring->dev->dev->dma_dev, ++ buf, len, ++ DMA_FROM_DEVICE); + + return dmaaddr; + } +@@ -411,13 +411,13 @@ void unmap_descbuffer(struct b43legacy_dmaring *ring, + int tx) + { + if (tx) +- ssb_dma_unmap_single(ring->dev->dev, +- addr, len, +- DMA_TO_DEVICE); ++ dma_unmap_single(ring->dev->dev->dma_dev, ++ addr, len, ++ DMA_TO_DEVICE); + else +- ssb_dma_unmap_single(ring->dev->dev, +- addr, len, +- DMA_FROM_DEVICE); ++ dma_unmap_single(ring->dev->dev->dma_dev, ++ addr, len, ++ DMA_FROM_DEVICE); + } + + static inline +@@ -427,8 +427,8 @@ void sync_descbuffer_for_cpu(struct b43legacy_dmaring *ring, + { + B43legacy_WARN_ON(ring->tx); + +- ssb_dma_sync_single_for_cpu(ring->dev->dev, +- addr, len, DMA_FROM_DEVICE); ++ dma_sync_single_for_cpu(ring->dev->dev->dma_dev, ++ addr, len, DMA_FROM_DEVICE); + } + + static inline +@@ -438,8 +438,8 @@ void sync_descbuffer_for_device(struct b43legacy_dmaring *ring, + { + B43legacy_WARN_ON(ring->tx); + +- ssb_dma_sync_single_for_device(ring->dev->dev, +- addr, len, DMA_FROM_DEVICE); ++ dma_sync_single_for_device(ring->dev->dev->dma_dev, ++ addr, len, DMA_FROM_DEVICE); + } + + static inline +@@ -458,11 +458,10 @@ void free_descriptor_buffer(struct b43legacy_dmaring *ring, + + static int alloc_ringmemory(struct b43legacy_dmaring *ring) + { +- /* GFP flags must match the flags in free_ringmemory()! */ +- ring->descbase = ssb_dma_alloc_consistent(ring->dev->dev, +- B43legacy_DMA_RINGMEMSIZE, +- &(ring->dmabase), +- GFP_KERNEL); ++ struct device *dma_dev = ring->dev->dev->dma_dev; ++ ++ ring->descbase = dma_alloc_coherent(dma_dev, B43legacy_DMA_RINGMEMSIZE, ++ &(ring->dmabase), GFP_KERNEL); + if (!ring->descbase) { + b43legacyerr(ring->dev->wl, "DMA ringmemory allocation" + " failed\n"); +@@ -475,8 +474,10 @@ static int alloc_ringmemory(struct b43legacy_dmaring *ring) + + static void free_ringmemory(struct b43legacy_dmaring *ring) + { +- ssb_dma_free_consistent(ring->dev->dev, B43legacy_DMA_RINGMEMSIZE, +- ring->descbase, ring->dmabase, GFP_KERNEL); ++ struct device *dma_dev = ring->dev->dev->dma_dev; ++ ++ dma_free_coherent(dma_dev, B43legacy_DMA_RINGMEMSIZE, ++ ring->descbase, ring->dmabase); + } + + /* Reset the RX DMA channel */ +@@ -588,7 +589,7 @@ static bool b43legacy_dma_mapping_error(struct b43legacy_dmaring *ring, + size_t buffersize, + bool dma_to_device) + { +- if (unlikely(ssb_dma_mapping_error(ring->dev->dev, addr))) ++ if (unlikely(dma_mapping_error(addr))) + return 1; + + switch (ring->type) { +@@ -905,9 +906,9 @@ struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev, + goto err_kfree_meta; + + /* test for ability to dma to txhdr_cache */ +- dma_test = ssb_dma_map_single(dev->dev, ring->txhdr_cache, +- sizeof(struct b43legacy_txhdr_fw3), +- DMA_TO_DEVICE); ++ dma_test = dma_map_single(dev->dev->dma_dev, ring->txhdr_cache, ++ sizeof(struct b43legacy_txhdr_fw3), ++ DMA_TO_DEVICE); + + if (b43legacy_dma_mapping_error(ring, dma_test, + sizeof(struct b43legacy_txhdr_fw3), 1)) { +@@ -919,7 +920,7 @@ struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev, + if (!ring->txhdr_cache) + goto err_kfree_meta; + +- dma_test = ssb_dma_map_single(dev->dev, ++ dma_test = dma_map_single(dev->dev->dma_dev, + ring->txhdr_cache, + sizeof(struct b43legacy_txhdr_fw3), + DMA_TO_DEVICE); +@@ -929,9 +930,9 @@ struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev, + goto err_kfree_txhdr_cache; + } + +- ssb_dma_unmap_single(dev->dev, dma_test, +- sizeof(struct b43legacy_txhdr_fw3), +- DMA_TO_DEVICE); ++ dma_unmap_single(dev->dev->dma_dev, ++ dma_test, sizeof(struct b43legacy_txhdr_fw3), ++ DMA_TO_DEVICE); + } + + ring->nr_slots = nr_slots; diff --git a/package/mac80211/patches-brcm/004-allow-ap-vlan-modes.patch b/package/mac80211/patches-brcm/004-allow-ap-vlan-modes.patch new file mode 100644 index 000000000..a8080b20e --- /dev/null +++ b/package/mac80211/patches-brcm/004-allow-ap-vlan-modes.patch @@ -0,0 +1,25 @@ +Subject: mac80211: allow AP and VLAN modes + +This patch allows switching interfaces into AP/VLAN modes using +cfg80211 (nl80211). Don't allow doing it with wext because then +people will just attempt to do it manually (without hostapd) and +complain that it doesn't work. + +Signed-off-by: Johannes Berg <johannes@sipsolutions.net> +--- + net/mac80211/cfg.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- everything.orig/net/mac80211/cfg.c 2008-08-06 21:38:13.000000000 +0200 ++++ everything/net/mac80211/cfg.c 2008-08-06 21:38:24.000000000 +0200 +@@ -33,6 +33,10 @@ nl80211_type_to_mac80211_type(enum nl802 + case NL80211_IFTYPE_MESH_POINT: + return IEEE80211_IF_TYPE_MESH_POINT; + #endif ++ case NL80211_IFTYPE_AP: ++ return IEEE80211_IF_TYPE_AP; ++ case NL80211_IFTYPE_AP_VLAN: ++ return IEEE80211_IF_TYPE_VLAN; + case NL80211_IFTYPE_WDS: + return IEEE80211_IF_TYPE_WDS; + default: |