diff options
Diffstat (limited to 'package/ltq-tapidemo')
| -rw-r--r-- | package/ltq-tapidemo/Config.in | 41 | ||||
| -rw-r--r-- | package/ltq-tapidemo/Makefile | 68 | ||||
| -rw-r--r-- | package/ltq-tapidemo/files/bringup_tapidemo | 89 | ||||
| -rw-r--r-- | package/ltq-tapidemo/patches/100-ifxmips.patch | 78 | ||||
| -rw-r--r-- | package/ltq-tapidemo/patches/110-no_echo_cancelation.patch | 12 |
5 files changed, 288 insertions, 0 deletions
diff --git a/package/ltq-tapidemo/Config.in b/package/ltq-tapidemo/Config.in new file mode 100644 index 000000000..b8e157cf9 --- /dev/null +++ b/package/ltq-tapidemo/Config.in @@ -0,0 +1,41 @@ +#menu "Configuration" +# depends on PACKAGE_ltq-tapidemo +choice + prompt "board selection" + depends on PACKAGE_ltq-tapidemo + default VOICE_CPE_TAPIDEMO_BOARD_EASY50712_V3 if TARGET_ifxmips_platform_danube + default VOICE_CPE_TAPIDEMO_BOARD_EASY508xx if TARGET_ifxmips_platform_ar9 + default VOICE_CPE_TAPIDEMO_BOARD_EASY80910 if TARGET_ifxmips_platform_vr9 + default VOICE_CPE_TAPIDEMO_BOARD_EASY50812 + help + Select the target platform. + + config VOICE_CPE_TAPIDEMO_BOARD_EASY50712 + bool "Danube reference board" + + config VOICE_CPE_TAPIDEMO_BOARD_EASY50712_V3 + bool "Danube reference board V3" + + config VOICE_CPE_TAPIDEMO_BOARD_EASY508xx + bool "AR9/GR9 reference board" + + config VOICE_CPE_TAPIDEMO_BOARD_EASY80910 + bool "VR9 reference board" +endchoice + +config VOICE_CPE_TAPIDEMO_QOS + bool "enable QOS support" + depends on PACKAGE_ltq-tapidemo + default n + help + Option to enable the KPI2UDP RTP packet acceleration path + (highly recommended for VoIP). + +config VOICE_CPE_TAPIDEMO_FAX_T.38_FW + bool "enable T.38 fax relay" + depends on (TARGET_ifxmips_platform_ar9 || TARGET_ifxmips_platform_vr9) && PACKAGE_ltq + default n + help + enable T.38 fax relay demo. + +#endmenu diff --git a/package/ltq-tapidemo/Makefile b/package/ltq-tapidemo/Makefile new file mode 100644 index 000000000..3d3ddc91d --- /dev/null +++ b/package/ltq-tapidemo/Makefile @@ -0,0 +1,68 @@ +# +# Copyright (C) 2008-2010 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +include $(TOPDIR)/rules.mk +include $(INCLUDE_DIR)/kernel.mk + +PKG_NAME:=tapidemo +PKG_VERSION:=5.0.1.27 +PKG_RELEASE:=1 + +PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz +PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources +PKG_MD5SUM:=a38a7bf3242aad607f50f57b988bc87c + +include $(INCLUDE_DIR)/package.mk + +define Package/ltq-tapidemo + SECTION:=utils + CATEGORY:=Utilities + TITLE:=TAPIdemo application for Lantiq boards + URL:=http://www.lantiq.com/ + DEPENDS:=+kmod-ltq-tapi +kmod-ltq-vmmc + MAINTAINER:=John Crispin <blogic@openwrt.org> + MENU:=1 +endef + +define Package/ltq-tapidemo/description + Voice Access mini-PBX Demo Application +endef + +define Package/ltq-tapidemo/config + source "$(SOURCE)/Config.in" +endef + +CONFIGURE_ARGS += \ + ARCH=$(LINUX_KARCH) \ + --enable-linux-26 \ + --enable-kernelincl="$(LINUX_DIR)/include" \ + --with-drvincl="$(STAGING_DIR)/usr/include" \ + $(call autoconf_bool,CONFIG_VOICE_CPE_TAPI_QOS,qos) \ + $(call autoconf_bool,CONFIG_VOICE_CPE_TAPIDEMO_FAX_T,fax-t38) \ + --enable-trace \ + --enable-fs + +ifeq ($(CONFIG_VOICE_CPE_TAPIDEMO_BOARD_EASY50712),y) + CONFIGURE_ARGS += --enable-boardname=EASY50712 +endif +ifeq ($(CONFIG_VOICE_CPE_TAPIDEMO_BOARD_EASY50712_V3),y) + CONFIGURE_ARGS += --enable-boardname=EASY50712_V3 +endif +ifeq ($(CONFIG_VOICE_CPE_TAPIDEMO_BOARD_EASY508xx),y) + CONFIGURE_ARGS += --enable-boardname=EASY508XX +endif +ifeq ($(CONFIG_VOICE_CPE_TAPIDEMO_BOARD_EASY80910),y) + CONFIGURE_ARGS += --enable-boardname=EASY508XX +endif + +define Package/ltq-tapidemo/install + $(INSTALL_DIR) $(1)/usr/sbin $(1)/etc/init.d/ + $(INSTALL_BIN) $(PKG_BUILD_DIR)/src/tapidemo $(1)/usr/sbin + $(INSTALL_BIN) ./files/bringup_tapidemo $(1)/etc/init.d/tapidemo +endef + +$(eval $(call BuildPackage,ltq-tapidemo)) diff --git a/package/ltq-tapidemo/files/bringup_tapidemo b/package/ltq-tapidemo/files/bringup_tapidemo new file mode 100644 index 000000000..6eb13d25f --- /dev/null +++ b/package/ltq-tapidemo/files/bringup_tapidemo @@ -0,0 +1,89 @@ +#!/bin/sh /etc/rc.common +# (C) 2008 openwrt.org + +START=96 + +[ ! -f /dev/vmmc10 ] && { + mknod /dev/vmmc10 c 122 10 + mknod /dev/vmmc11 c 122 11 + mknod /dev/vmmc12 c 122 12 + mknod /dev/vmmc13 c 122 13 + mknod /dev/vmmc14 c 122 14 + mknod /dev/vmmc15 c 122 15 + mknod /dev/vmmc16 c 122 16 + mknod /dev/vmmc17 c 122 17 + mknod /dev/vmmc18 c 122 18 +} + +TD_EXTRA_FLAGS_FXO= +TD_EXTRA_FLAGS_KPI2UDP= +TD_DOWNLOAD_PATH=/lib/firmware/ +DEV_NODE_TERIDIAN=ter10 + + # Show help +help() +{ + echo "Usage:" + echo " - $0 WAN-IF-NAME - start TAPIDEMO without FXO support" + echo " - $0 WAN-IF-NAME fxo - start TAPIDEMO with FXO support." + echo " - $0 stop - stop TAPIDEMO" +} + +# Check if device node for Teridian exists +checkFxoSupport() +{ + if [ ! -e /dev/$DEV_NODE_TERIDIAN ];then + echo "FXO support is disabled. Can not find required driver's device node." + else + TD_EXTRA_FLAGS_FXO="-x" + fi +} + +# Check if module drv_kpi2udp is loaded +checkKpi2UdpSupport() +{ + tmp=`cat /proc/modules | grep 'drv_kpi2udp '` + if [ "$tmp" != "" ]; then + TD_EXTRA_FLAGS_KPI2UDP="-q" + fi +} + +start() +{ + TD_WANIF=$1 + + TD_WANIF_IP=`ifconfig $TD_WANIF | grep 'inet addr:' | cut -f2 -d: | cut -f1 -d' '` + if [ "$TD_WANIF_IP" = "" ]; then + echo "Error, getting IP address for network device $TD_WANIF failed." + exit 1 + fi + + if [ "$2" = "" ];then + # FXO support is disabled. + continue + elif [ "$2" = "fxo" ];then + checkFxoSupport + else + echo "Error, unknown second parameter." + help + exit 1 + fi + + checkKpi2UdpSupport + + if [ -r /etc/rc.conf ]; then + . /etc/rc.conf + fi + + TD_DEBUG_LEVEL=$tapiDebugLevel + if [ "$TD_DEBUG_LEVEL" = "" ]; then + TD_DEBUG_LEVEL=3 + fi + + /usr/sbin/tapidemo -d $TD_DEBUG_LEVEL $TD_EXTRA_FLAGS_FXO $TD_EXTRA_FLAGS_KPI2UDP -i $TD_WANIF_IP -l $TD_DOWNLOAD_PATH & +} + +stop() +{ + killall tapidemo > /dev/null 2> /dev/null +} diff --git a/package/ltq-tapidemo/patches/100-ifxmips.patch b/package/ltq-tapidemo/patches/100-ifxmips.patch new file mode 100644 index 000000000..43fa988ef --- /dev/null +++ b/package/ltq-tapidemo/patches/100-ifxmips.patch @@ -0,0 +1,78 @@ +--- a/src/board_easy50712.c Mon Mar 15 14:47:53 2010 +0300 ++++ b/src/board_easy50712.c Tue Mar 16 17:25:55 2010 +0300 +@@ -40,7 +40,9 @@ + #endif /* DUSLIC_FXO */ + #endif /* EASY50712_V3 */ + +-#include "asm/ifx/ifx_gpio.h" ++#ifdef FXO ++# include "asm/ifx/ifx_gpio.h" ++#endif + + /* ============================= */ + /* Defines */ +@@ -896,6 +898,7 @@ + /* Global function definition */ + /* ============================= */ + ++#ifdef FXO + /** + Set direction of GPIO pin to out which is used for set/clear reset. + +@@ -944,7 +947,7 @@ + return IFX_SUCCESS; + } + break; +- ++ + case GPIO_DUSLIC_EASY50510: + { + TRACE(TAPIDEMO, DBG_LEVEL_LOW, +@@ -982,8 +985,9 @@ + + return IFX_SUCCESS; + }; ++#endif + +- ++#ifdef FXO + /* + Set/Clear reset of device by using GPIO port. + +@@ -1086,7 +1090,9 @@ + /* usleep(100000); karol - workaround, */ + return ret; + } ++#endif + ++#ifdef EASY50510 + /** + Set PCM master mode. + +@@ -1178,15 +1184,16 @@ + + return ret; + } ++#endif + + /** + Register board. + + \param pBoard - pointer to board +- ++ + \return IFX_SUCCESS if successful, otherwise IFX_ERROR. + +- \remarks ++ \remarks + */ + IFX_return_t BOARD_Easy50712_Register(BOARD_t* pBoard) + { +@@ -1204,7 +1211,3 @@ + pBoard->RemoveBoard = BOARD_Easy50712_RemoveBoard; + return IFX_SUCCESS; + } +- +- +- +- diff --git a/package/ltq-tapidemo/patches/110-no_echo_cancelation.patch b/package/ltq-tapidemo/patches/110-no_echo_cancelation.patch new file mode 100644 index 000000000..d424d4847 --- /dev/null +++ b/package/ltq-tapidemo/patches/110-no_echo_cancelation.patch @@ -0,0 +1,12 @@ +Index: tapidemo-5.0.1.27/src/device_vmmc.c +=================================================================== +--- tapidemo-5.0.1.27.orig/src/device_vmmc.c 2009-11-09 15:40:31.000000000 +0100 ++++ tapidemo-5.0.1.27/src/device_vmmc.c 2010-03-30 21:32:51.000000000 +0200 +@@ -240,7 +240,6 @@ + TRACE(TAPIDEMO, DBG_LEVEL_HIGH, + ("Error, BBD file %s is not found.\n(File: %s, line: %d)\n", + pCpuDevice->pszBBD_CRAM_File, __FILE__, __LINE__)); +- return IFX_ERROR; + } + + #endif /* USE_FILESYSTEM */ |