diff options
Diffstat (limited to 'package/linux/kernel-source/drivers')
18 files changed, 8052 insertions, 0 deletions
diff --git a/package/linux/kernel-source/drivers/mtd/chips/cfi_cmdset_0701.c b/package/linux/kernel-source/drivers/mtd/chips/cfi_cmdset_0701.c new file mode 100644 index 000000000..5087477bb --- /dev/null +++ b/package/linux/kernel-source/drivers/mtd/chips/cfi_cmdset_0701.c @@ -0,0 +1,855 @@ +/* + * Common Flash Interface support: + * SST Standard Vendor Command Set (ID 0x0701) + * + * Copyright (C) 2000 Crossnet Co. <info@crossnet.co.jp> + * + * 2_by_8 routines added by Simon Munton + * + * This code is GPL + * + * $Id$ + * + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <asm/io.h> +#include <asm/byteorder.h> + +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/mtd/map.h> +#include <linux/mtd/cfi.h> + +static int cfi_sststd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); +static int cfi_sststd_write(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); +static int cfi_sststd_erase_onesize(struct mtd_info *, struct erase_info *); +static int cfi_sststd_erase_varsize(struct mtd_info *, struct erase_info *); +static void cfi_sststd_sync (struct mtd_info *); +static int cfi_sststd_suspend (struct mtd_info *); +static void cfi_sststd_resume (struct mtd_info *); + +static void cfi_sststd_destroy(struct mtd_info *); + +struct mtd_info *cfi_cmdset_0701(struct map_info *, int); +static struct mtd_info *cfi_sststd_setup (struct map_info *); + + +static struct mtd_chip_driver cfi_sststd_chipdrv = { + probe: NULL, /* Not usable directly */ + destroy: cfi_sststd_destroy, + name: "cfi_cmdset_0701", + module: THIS_MODULE +}; + +struct mtd_info *cfi_cmdset_0701(struct map_info *map, int primary) +{ + struct cfi_private *cfi = map->fldrv_priv; + int ofs_factor = cfi->interleave * cfi->device_type; + int i; + __u8 major, minor; + __u32 base = cfi->chips[0].start; + + if (cfi->cfi_mode==1){ + __u16 adr = primary?cfi->cfiq->P_ADR:cfi->cfiq->A_ADR; + + cfi_send_gen_cmd(0xAA, 0x5555, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, 0x2AAA, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x98, 0x5555, base, map, cfi, cfi->device_type, NULL); + + major = cfi_read_query(map, base + (adr+3)*ofs_factor); + minor = cfi_read_query(map, base + (adr+4)*ofs_factor); + + printk(" SST Query Table v%c.%c at 0x%4.4X\n", + major, minor, adr); + cfi_send_gen_cmd(0xf0, 0x5555, base, map, cfi, cfi->device_type, NULL); + + cfi_send_gen_cmd(0xAA, 0x5555, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, 0x2AAA, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x90, 0x5555, base, map, cfi, cfi->device_type, NULL); + cfi->mfr = cfi_read_query(map, base); + cfi->id = cfi_read_query(map, base + ofs_factor); + + cfi_send_gen_cmd(0xAA, 0x5555, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, 0x2AAA, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x98, 0x5555, base, map, cfi, cfi->device_type, NULL); + + switch (cfi->device_type) { + case CFI_DEVICETYPE_X16: + cfi->addr_unlock1 = 0x5555; + cfi->addr_unlock2 = 0x2AAA; + break; + default: + printk(KERN_NOTICE "Eep. Unknown cfi_cmdset_0701 device type %d\n", cfi->device_type); + return NULL; + } + } /* CFI mode */ + + for (i=0; i< cfi->numchips; i++) { + cfi->chips[i].word_write_time = 1<<cfi->cfiq->WordWriteTimeoutTyp; + cfi->chips[i].buffer_write_time = 1<<cfi->cfiq->BufWriteTimeoutTyp; + cfi->chips[i].erase_time = 1<<cfi->cfiq->BlockEraseTimeoutTyp; + } + + map->fldrv = &cfi_sststd_chipdrv; + MOD_INC_USE_COUNT; + + cfi_send_gen_cmd(0xf0, 0x5555, base, map, cfi, cfi->device_type, NULL); + return cfi_sststd_setup(map); +} + +static struct mtd_info *cfi_sststd_setup(struct map_info *map) +{ + struct cfi_private *cfi = map->fldrv_priv; + struct mtd_info *mtd; + unsigned long devsize = (1<<cfi->cfiq->DevSize) * cfi->interleave; + + mtd = kmalloc(sizeof(*mtd), GFP_KERNEL); + printk("number of %s chips: %d\n", (cfi->cfi_mode)?"JEDEC":"CFI",cfi->numchips); + + if (!mtd) { + printk("Failed to allocate memory for MTD device\n"); + kfree(cfi->cmdset_priv); + return NULL; + } + + memset(mtd, 0, sizeof(*mtd)); + mtd->priv = map; + mtd->type = MTD_NORFLASH; + /* Also select the correct geometry setup too */ + mtd->size = devsize * cfi->numchips; + + if (cfi->cfiq->NumEraseRegions == 1) { + /* No need to muck about with multiple erase sizes */ + mtd->erasesize = ((cfi->cfiq->EraseRegionInfo[0] >> 8) & ~0xff) * cfi->interleave; + } else { + unsigned long offset = 0; + int i,j; + + mtd->numeraseregions = cfi->cfiq->NumEraseRegions * cfi->numchips; + mtd->eraseregions = kmalloc(sizeof(struct mtd_erase_region_info) * mtd->numeraseregions, GFP_KERNEL); + if (!mtd->eraseregions) { + printk("Failed to allocate memory for MTD erase region info\n"); + kfree(cfi->cmdset_priv); + return NULL; + } + + for (i=0; i<cfi->cfiq->NumEraseRegions; i++) { + unsigned long ernum, ersize; + ersize = ((cfi->cfiq->EraseRegionInfo[i] >> 8) & ~0xff) * cfi->interleave; + ernum = (cfi->cfiq->EraseRegionInfo[i] & 0xffff) + 1; + + if (mtd->erasesize < ersize) { + mtd->erasesize = ersize; + } + for (j=0; j<cfi->numchips; j++) { + mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].offset = (j*devsize)+offset; + mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].erasesize = ersize; + mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].numblocks = ernum; + } + offset += (ersize * ernum); + } + + // debug + for (i=0; i<mtd->numeraseregions;i++){ + printk("%d: offset=0x%x,size=0x%x,blocks=%d\n", + i,mtd->eraseregions[i].offset, + mtd->eraseregions[i].erasesize, + mtd->eraseregions[i].numblocks); + } + } + + switch (CFIDEV_BUSWIDTH) + { + case 1: + case 2: + case 4: + if (mtd->numeraseregions > 1) + mtd->erase = cfi_sststd_erase_varsize; + else + mtd->erase = cfi_sststd_erase_onesize; + mtd->read = cfi_sststd_read; + mtd->write = cfi_sststd_write; + break; + + default: + printk("Unsupported buswidth\n"); + kfree(mtd); + kfree(cfi->cmdset_priv); + return NULL; + break; + } + mtd->sync = cfi_sststd_sync; + mtd->suspend = cfi_sststd_suspend; + mtd->resume = cfi_sststd_resume; + mtd->flags = MTD_CAP_NORFLASH; + map->fldrv = &cfi_sststd_chipdrv; + mtd->name = map->name; + MOD_INC_USE_COUNT; + return mtd; +} + +static inline int do_read_onechip(struct map_info *map, struct flchip *chip, loff_t adr, size_t len, u_char *buf) +{ + DECLARE_WAITQUEUE(wait, current); + unsigned long timeo = jiffies + HZ; + + retry: + cfi_spin_lock(chip->mutex); + + if (chip->state != FL_READY){ + printk("Waiting for chip to read, status = %d\n", chip->state); + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + + cfi_spin_unlock(chip->mutex); + + schedule(); + remove_wait_queue(&chip->wq, &wait); + timeo = jiffies + HZ; + + goto retry; + } + + adr += chip->start; + + chip->state = FL_READY; + + map->copy_from(map, buf, adr, len); + + wake_up(&chip->wq); + cfi_spin_unlock(chip->mutex); + + return 0; +} + +static int cfi_sststd_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + unsigned long ofs; + int chipnum; + int ret = 0; + + /* ofs: offset within the first chip that the first read should start */ + + chipnum = (from >> cfi->chipshift); + ofs = from - (chipnum << cfi->chipshift); + + + *retlen = 0; + + while (len) { + unsigned long thislen; + + if (chipnum >= cfi->numchips) + break; + + if ((len + ofs -1) >> cfi->chipshift) + thislen = (1<<cfi->chipshift) - ofs; + else + thislen = len; + + ret = do_read_onechip(map, &cfi->chips[chipnum], ofs, thislen, buf); + if (ret) + break; + + *retlen += thislen; + len -= thislen; + buf += thislen; + + ofs = 0; + chipnum++; + } + return ret; +} + +static int do_write_oneword(struct map_info *map, struct flchip *chip, unsigned long adr, __u32 datum, int fast) +{ + unsigned long timeo = jiffies + HZ; + unsigned int Last[4]; + unsigned long Count = 0; + struct cfi_private *cfi = map->fldrv_priv; + DECLARE_WAITQUEUE(wait, current); + int ret = 0; + + retry: + cfi_spin_lock(chip->mutex); + + if (chip->state != FL_READY){ + printk("Waiting for chip to write, status = %d\n", chip->state); + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + + cfi_spin_unlock(chip->mutex); + + schedule(); + remove_wait_queue(&chip->wq, &wait); + printk("Wake up to write:\n"); + timeo = jiffies + HZ; + + goto retry; + } + + chip->state = FL_WRITING; + + adr += chip->start; + ENABLE_VPP(map); + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, CFI_DEVICETYPE_X16, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, CFI_DEVICETYPE_X16, NULL); + cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, CFI_DEVICETYPE_X16, NULL); + + cfi_write(map, datum, adr); + + cfi_spin_unlock(chip->mutex); + cfi_udelay(chip->word_write_time); + cfi_spin_lock(chip->mutex); + + Last[0] = cfi_read(map, adr); + // printk("Last[0] is %x\n", Last[0]); + Last[1] = cfi_read(map, adr); + // printk("Last[1] is %x\n", Last[1]); + Last[2] = cfi_read(map, adr); + // printk("Last[2] is %x\n", Last[2]); + + for (Count = 3; Last[(Count - 1) % 4] != Last[(Count - 2) % 4] && Count < 10000; Count++){ + cfi_spin_unlock(chip->mutex); + cfi_udelay(10); + cfi_spin_lock(chip->mutex); + + Last[Count % 4] = cfi_read(map, adr); + // printk("Last[%d%%4] is %x\n", Count, Last[Count%4]); + } + + if (Last[(Count - 1) % 4] != datum){ + printk("Last[%ld] is %x, datum is %x\n",(Count - 1) % 4,Last[(Count - 1) % 4],datum); + cfi_send_gen_cmd(0xF0, 0, chip->start, map, cfi, cfi->device_type, NULL); + DISABLE_VPP(map); + ret = -EIO; + } + DISABLE_VPP(map); + chip->state = FL_READY; + wake_up(&chip->wq); + cfi_spin_unlock(chip->mutex); + + return ret; +} + +static int cfi_sststd_write (struct mtd_info *mtd, loff_t to , size_t len, size_t *retlen, const u_char *buf) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + int ret = 0; + int chipnum; + unsigned long ofs, chipstart; + + *retlen = 0; + if (!len) + return 0; + + chipnum = to >> cfi->chipshift; + ofs = to - (chipnum << cfi->chipshift); + chipstart = cfi->chips[chipnum].start; + + /* If it's not bus-aligned, do the first byte write */ + if (ofs & (CFIDEV_BUSWIDTH-1)) { + unsigned long bus_ofs = ofs & ~(CFIDEV_BUSWIDTH-1); + int i = ofs - bus_ofs; + int n = 0; + u_char tmp_buf[4]; + __u32 datum; + + map->copy_from(map, tmp_buf, bus_ofs + cfi->chips[chipnum].start, CFIDEV_BUSWIDTH); + while (len && i < CFIDEV_BUSWIDTH) + tmp_buf[i++] = buf[n++], len--; + + if (cfi_buswidth_is_2()) { + datum = *(__u16*)tmp_buf; + } else if (cfi_buswidth_is_4()) { + datum = *(__u32*)tmp_buf; + } else { + return -EINVAL; /* should never happen, but be safe */ + } + + ret = do_write_oneword(map, &cfi->chips[chipnum], + bus_ofs, datum, 0); + if (ret) + return ret; + + ofs += n; + buf += n; + (*retlen) += n; + + if (ofs >> cfi->chipshift) { + chipnum ++; + ofs = 0; + if (chipnum == cfi->numchips) + return 0; + } + } + + /* We are now aligned, write as much as possible */ + while(len >= CFIDEV_BUSWIDTH) { + __u32 datum; + + if (cfi_buswidth_is_1()) { + datum = *(__u8*)buf; + } else if (cfi_buswidth_is_2()) { + datum = *(__u16*)buf; + } else if (cfi_buswidth_is_4()) { + datum = *(__u32*)buf; + } else { + return -EINVAL; + } + ret = do_write_oneword(map, &cfi->chips[chipnum], + ofs, datum, cfi->fast_prog); + if (ret) { + return ret; + } + + ofs += CFIDEV_BUSWIDTH; + buf += CFIDEV_BUSWIDTH; + (*retlen) += CFIDEV_BUSWIDTH; + len -= CFIDEV_BUSWIDTH; + + if (ofs >> cfi->chipshift) { + chipnum ++; + ofs = 0; + if (chipnum == cfi->numchips) + return 0; + chipstart = cfi->chips[chipnum].start; + } + } + + if (len & (CFIDEV_BUSWIDTH-1)) { + int i = 0, n = 0; + u_char tmp_buf[4]; + __u32 datum; + + map->copy_from(map, tmp_buf, ofs + cfi->chips[chipnum].start, CFIDEV_BUSWIDTH); + while (len--) + tmp_buf[i++] = buf[n++]; + + if (cfi_buswidth_is_2()) { + datum = *(__u16*)tmp_buf; + } else if (cfi_buswidth_is_4()) { + datum = *(__u32*)tmp_buf; + } else { + return -EINVAL; /* should never happen, but be safe */ + } + + ret = do_write_oneword(map, &cfi->chips[chipnum], + ofs, datum, 0); + if (ret) + return ret; + + (*retlen) += n; + } + + return 0; +} + +static inline int do_erase_oneblock(struct map_info *map, struct flchip *chip, unsigned long adr) +{ + unsigned int status; + unsigned long timeo = jiffies + HZ; + struct cfi_private *cfi = map->fldrv_priv; + unsigned int rdy_mask; + DECLARE_WAITQUEUE(wait, current); + + retry: + cfi_spin_lock(chip->mutex); + + if (chip->state != FL_READY){ + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + + cfi_spin_unlock(chip->mutex); + + schedule(); + remove_wait_queue(&chip->wq, &wait); + timeo = jiffies + HZ; + + goto retry; + } + + chip->state = FL_ERASING; + + adr += chip->start; + ENABLE_VPP(map); + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, CFI_DEVICETYPE_X16, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, CFI_DEVICETYPE_X16, NULL); + cfi_send_gen_cmd(0x80, cfi->addr_unlock1, chip->start, map, cfi, CFI_DEVICETYPE_X16, NULL); + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, CFI_DEVICETYPE_X16, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, CFI_DEVICETYPE_X16, NULL); + cfi_write(map, CMD(0x30), adr); + + timeo = jiffies + (HZ*20); + + cfi_spin_unlock(chip->mutex); + schedule_timeout(HZ); + cfi_spin_lock(chip->mutex); + + rdy_mask = CMD(0x80); + + /* Once the state machine's known to be working I'll do that */ + + while ( ( (status = cfi_read(map,adr)) & rdy_mask ) != rdy_mask ) { + static int z=0; + + if (chip->state != FL_ERASING) { + /* Someone's suspended the erase. Sleep */ + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + + cfi_spin_unlock(chip->mutex); + printk("erase suspended. Sleeping\n"); + + schedule(); + remove_wait_queue(&chip->wq, &wait); + timeo = jiffies + (HZ*2); + cfi_spin_lock(chip->mutex); + continue; + } + + /* OK Still waiting */ + if (time_after(jiffies, timeo)) { + chip->state = FL_READY; + cfi_spin_unlock(chip->mutex); + printk("waiting for erase to complete timed out."); + DISABLE_VPP(map); + return -EIO; + } + + /* Latency issues. Drop the lock, wait a while and retry */ + cfi_spin_unlock(chip->mutex); + + z++; + if ( 0 && !(z % 100 )) + printk("chip not ready yet after erase. looping\n"); + + cfi_udelay(1); + + cfi_spin_lock(chip->mutex); + continue; + } + + /* Done and happy. */ + DISABLE_VPP(map); + chip->state = FL_READY; + wake_up(&chip->wq); + cfi_spin_unlock(chip->mutex); + return 0; +} + +static int cfi_sststd_erase_varsize(struct mtd_info *mtd, struct erase_info *instr) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + unsigned long adr, len; + int chipnum, ret = 0; + int i, first; + struct mtd_erase_region_info *regions = mtd->eraseregions; + + if (instr->addr > mtd->size) + return -EINVAL; + + if ((instr->len + instr->addr) > mtd->size) + return -EINVAL; + + /* Check that both start and end of the requested erase are + * aligned with the erasesize at the appropriate addresses. + */ + + i = 0; + + /* Skip all erase regions which are ended before the start of + the requested erase. Actually, to save on the calculations, + we skip to the first erase region which starts after the + start of the requested erase, and then go back one. + */ + + while (i < mtd->numeraseregions && instr->addr >= regions[i].offset) + i++; + i--; + + /* OK, now i is pointing at the erase region in which this + erase request starts. Check the start of the requested + erase range is aligned with the erase size which is in + effect here. + */ + + if (instr->addr & (regions[i].erasesize-1)) + return -EINVAL; + + /* Remember the erase region we start on */ + first = i; + + /* Next, check that the end of the requested erase is aligned + * with the erase region at that address. + */ + + while (i<mtd->numeraseregions && (instr->addr + instr->len) >= regions[i].offset) + i++; + + /* As before, drop back one to point at the region in which + the address actually falls + */ + i--; + + if ((instr->addr + instr->len) & (regions[i].erasesize-1)) + return -EINVAL; + + chipnum = instr->addr >> cfi->chipshift; + adr = instr->addr - (chipnum << cfi->chipshift); + len = instr->len; + + i=first; + + while(len) { + ret = do_erase_oneblock(map, &cfi->chips[chipnum], adr); + + if (ret) + return ret; + + adr += regions[i].erasesize; + len -= regions[i].erasesize; + + if (adr % (1<< cfi->chipshift) == ((regions[i].offset + (regions[i].erasesize * regions[i].numblocks)) %( 1<< cfi->chipshift))) + i++; + + if (adr >> cfi->chipshift) { + adr = 0; + chipnum++; + + if (chipnum >= cfi->numchips) + break; + } + } + + instr->state = MTD_ERASE_DONE; + if (instr->callback) + instr->callback(instr); + + return 0; +} + +static int cfi_sststd_erase_onesize(struct mtd_info *mtd, struct erase_info *instr) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + unsigned long adr, len; + int chipnum, ret = 0; + + if (instr->addr & (mtd->erasesize - 1)) + return -EINVAL; + + if (instr->len & (mtd->erasesize -1)) + return -EINVAL; + + if ((instr->len + instr->addr) > mtd->size) + return -EINVAL; + + chipnum = instr->addr >> cfi->chipshift; + adr = instr->addr - (chipnum << cfi->chipshift); + len = instr->len; + + while(len) { + ret = do_erase_oneblock(map, &cfi->chips[chipnum], adr); + + if (ret) + return ret; + + adr += mtd->erasesize; + len -= mtd->erasesize; + + if (adr >> cfi->chipshift) { + adr = 0; + chipnum++; + + if (chipnum >= cfi->numchips) + break; + } + } + + instr->state = MTD_ERASE_DONE; + if (instr->callback) + instr->callback(instr); + + return 0; +} + +static void cfi_sststd_sync (struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + int i; + struct flchip *chip; + int ret = 0; + DECLARE_WAITQUEUE(wait, current); + + for (i=0; !ret && i<cfi->numchips; i++) { + chip = &cfi->chips[i]; + + retry: + cfi_spin_lock(chip->mutex); + + switch(chip->state) { + case FL_READY: + case FL_STATUS: + case FL_CFI_QUERY: + case FL_JEDEC_QUERY: + chip->oldstate = chip->state; + chip->state = FL_SYNCING; + /* No need to wake_up() on this state change - + * as the whole point is that nobody can do anything + * with the chip now anyway. + */ + case FL_SYNCING: + cfi_spin_unlock(chip->mutex); + break; + + default: + /* Not an idle state */ + add_wait_queue(&chip->wq, &wait); + + cfi_spin_unlock(chip->mutex); + + schedule(); + + remove_wait_queue(&chip->wq, &wait); + + goto retry; + } + } + + /* Unlock the chips again */ + + for (i--; i >=0; i--) { + chip = &cfi->chips[i]; + + cfi_spin_lock(chip->mutex); + + if (chip->state == FL_SYNCING) { + chip->state = chip->oldstate; + wake_up(&chip->wq); + } + cfi_spin_unlock(chip->mutex); + } +} + + +static int cfi_sststd_suspend(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + int i; + struct flchip *chip; + int ret = 0; +//printk("suspend\n"); + + for (i=0; !ret && i<cfi->numchips; i++) { + chip = &cfi->chips[i]; + + cfi_spin_lock(chip->mutex); + + switch(chip->state) { + case FL_READY: + case FL_STATUS: + case FL_CFI_QUERY: + case FL_JEDEC_QUERY: + chip->oldstate = chip->state; + chip->state = FL_PM_SUSPENDED; + /* No need to wake_up() on this state change - + * as the whole point is that nobody can do anything + * with the chip now anyway. + */ + case FL_PM_SUSPENDED: + break; + + default: + ret = -EAGAIN; + break; + } + cfi_spin_unlock(chip->mutex); + } + + /* Unlock the chips again */ + + if (ret) { + for (i--; i >=0; i--) { + chip = &cfi->chips[i]; + + cfi_spin_lock(chip->mutex); + + if (chip->state == FL_PM_SUSPENDED) { + chip->state = chip->oldstate; + wake_up(&chip->wq); + } + cfi_spin_unlock(chip->mutex); + } + } + + return ret; +} + +static void cfi_sststd_resume(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + int i; + struct flchip *chip; +//printk("resume\n"); + + for (i=0; i<cfi->numchips; i++) { + + chip = &cfi->chips[i]; + + cfi_spin_lock(chip->mutex); + + if (chip->state == FL_PM_SUSPENDED) { + chip->state = FL_READY; + cfi_write(map, CMD(0xF0), chip->start); + wake_up(&chip->wq); + } + else + printk("Argh. Chip not in PM_SUSPENDED state upon resume()\n"); + + cfi_spin_unlock(chip->mutex); + } +} + +static void cfi_sststd_destroy(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + kfree(cfi->cmdset_priv); + kfree(cfi); +} + +#if LINUX_VERSION_CODE < 0x20212 && defined(MODULE) +#define cfi_sststd_init init_module +#define cfi_sststd_exit cleanup_module +#endif + +static char im_name[]="cfi_cmdset_0701"; + +mod_init_t cfi_sststd_init(void) +{ + inter_module_register(im_name, THIS_MODULE, &cfi_cmdset_0701); + return 0; +} + +mod_exit_t cfi_sststd_exit(void) +{ + inter_module_unregister(im_name); +} + +module_init(cfi_sststd_init); +module_exit(cfi_sststd_exit); + diff --git a/package/linux/kernel-source/drivers/mtd/devices/sflash.c b/package/linux/kernel-source/drivers/mtd/devices/sflash.c new file mode 100644 index 000000000..4dbd76d87 --- /dev/null +++ b/package/linux/kernel-source/drivers/mtd/devices/sflash.c @@ -0,0 +1,283 @@ +/* + * Broadcom SiliconBackplane chipcommon serial flash interface + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/ioport.h> +#include <linux/mtd/compatmac.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/errno.h> +#include <linux/pci.h> +#include <asm/io.h> + +#include <typedefs.h> +#include <bcmdevs.h> +#include <bcmutils.h> +#include <osl.h> +#include <bcmutils.h> +#include <bcmnvram.h> +#include <sbconfig.h> +#include <sbchipc.h> +#include <sflash.h> + +#ifdef CONFIG_MTD_PARTITIONS +extern struct mtd_partition * init_mtd_partitions(struct mtd_info *mtd, size_t size); +#endif + +struct sflash_mtd { + chipcregs_t *cc; + struct semaphore lock; + struct mtd_info mtd; + struct mtd_erase_region_info region; +}; + +/* Private global state */ +static struct sflash_mtd sflash; + +static int +sflash_mtd_poll(struct sflash_mtd *sflash, unsigned int offset, int timeout) +{ + int now = jiffies; + int ret = 0; + + for (;;) { + if (!sflash_poll(sflash->cc, offset)) { + ret = 0; + break; + } + if (time_after(jiffies, now + timeout)) { + printk(KERN_ERR "sflash: timeout\n"); + ret = -ETIMEDOUT; + break; + } + if (current->need_resched) { + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(timeout / 10); + } else + udelay(1); + } + + return ret; +} + +static int +sflash_mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) +{ + struct sflash_mtd *sflash = (struct sflash_mtd *) mtd->priv; + int bytes, ret = 0; + + /* Check address range */ + if (!len) + return 0; + if ((from + len) > mtd->size) + return -EINVAL; + + down(&sflash->lock); + + *retlen = 0; + while (len) { + if ((bytes = sflash_read(sflash->cc, (uint) from, len, buf)) < 0) { + ret = bytes; + break; + } + from += (loff_t) bytes; + len -= bytes; + buf += bytes; + *retlen += bytes; + } + + up(&sflash->lock); + + return ret; +} + +static int +sflash_mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) +{ + struct sflash_mtd *sflash = (struct sflash_mtd *) mtd->priv; + int bytes, ret = 0; + + /* Check address range */ + if (!len) + return 0; + if ((to + len) > mtd->size) + return -EINVAL; + + down(&sflash->lock); + + *retlen = 0; + while (len) { + if ((bytes = sflash_write(sflash->cc, (uint) to, len, buf)) < 0) { + ret = bytes; + break; + } + if ((ret = sflash_mtd_poll(sflash, (unsigned int) to, HZ / 10))) + break; + to += (loff_t) bytes; + len -= bytes; + buf += bytes; + *retlen += bytes; + } + + up(&sflash->lock); + + return ret; +} + +static int +sflash_mtd_erase(struct mtd_info *mtd, struct erase_info *erase) +{ + struct sflash_mtd *sflash = (struct sflash_mtd *) mtd->priv; + int i, j, ret = 0; + unsigned int addr, len; + + /* Check address range */ + if (!erase->len) + return 0; + if ((erase->addr + erase->len) > mtd->size) + return -EINVAL; + + addr = erase->addr; + len = erase->len; + + down(&sflash->lock); + + /* Ensure that requested region is aligned */ + for (i = 0; i < mtd->numeraseregions; i++) { + for (j = 0; j < mtd->eraseregions[i].numblocks; j++) { + if (addr == mtd->eraseregions[i].offset + mtd->eraseregions[i].erasesize * j && + len >= mtd->eraseregions[i].erasesize) { + if ((ret = sflash_erase(sflash->cc, addr)) < 0) + break; + if ((ret = sflash_mtd_poll(sflash, addr, 10 * HZ))) + break; + addr += mtd->eraseregions[i].erasesize; + len -= mtd->eraseregions[i].erasesize; + } + } + if (ret) + break; + } + + up(&sflash->lock); + + /* Set erase status */ + if (ret) + erase->state = MTD_ERASE_FAILED; + else + erase->state = MTD_ERASE_DONE; + + /* Call erase callback */ + if (erase->callback) + erase->callback(erase); + + return ret; +} + +#if LINUX_VERSION_CODE < 0x20212 && defined(MODULE) +#define sflash_mtd_init init_module +#define sflash_mtd_exit cleanup_module +#endif + +mod_init_t +sflash_mtd_init(void) +{ + struct pci_dev *pdev; + int ret = 0; + struct sflash *info; + uint i; +#ifdef CONFIG_MTD_PARTITIONS + struct mtd_partition *parts; +#endif + + if (!(pdev = pci_find_device(VENDOR_BROADCOM, SB_CC, NULL))) { + printk(KERN_ERR "sflash: chipcommon not found\n"); + return -ENODEV; + } + + memset(&sflash, 0, sizeof(struct sflash_mtd)); + init_MUTEX(&sflash.lock); + + /* Map registers and flash base */ + if (!(sflash.cc = ioremap_nocache(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)))) { + printk(KERN_ERR "sflash: error mapping registers\n"); + ret = -EIO; + goto fail; + } + + /* Initialize serial flash access */ + info = sflash_init(sflash.cc); + + if (!info) { + printk(KERN_ERR "sflash: found no supported devices\n"); + ret = -ENODEV; + goto fail; + } + + /* Setup region info */ + sflash.region.offset = 0; + sflash.region.erasesize = info->blocksize; + sflash.region.numblocks = info->numblocks; + if (sflash.region.erasesize > sflash.mtd.erasesize) + sflash.mtd.erasesize = sflash.region.erasesize; + sflash.mtd.size = info->size; + sflash.mtd.numeraseregions = 1; + + /* Register with MTD */ + sflash.mtd.name = "sflash"; + sflash.mtd.type = MTD_NORFLASH; + sflash.mtd.flags = MTD_CAP_NORFLASH; + sflash.mtd.eraseregions = &sflash.region; + sflash.mtd.module = THIS_MODULE; + sflash.mtd.erase = sflash_mtd_erase; + sflash.mtd.read = sflash_mtd_read; + sflash.mtd.write = sflash_mtd_write; + sflash.mtd.priv = &sflash; + +#ifdef CONFIG_MTD_PARTITIONS + parts = init_mtd_partitions(&sflash.mtd, sflash.mtd.size); + for (i = 0; parts[i].name; i++); + ret = add_mtd_partitions(&sflash.mtd, parts, i); +#else + ret = add_mtd_device(&sflash.mtd); +#endif + if (ret) { + printk(KERN_ERR "sflash: add_mtd failed\n"); + goto fail; + } + + return 0; + + fail: + if (sflash.cc) + iounmap((void *) sflash.cc); + return ret; +} + +mod_exit_t +sflash_mtd_exit(void) +{ +#ifdef CONFIG_MTD_PARTITIONS + del_mtd_partitions(&sflash.mtd); +#else + del_mtd_device(&sflash.mtd); +#endif + iounmap((void *) sflash.cc); +} + +module_init(sflash_mtd_init); +module_exit(sflash_mtd_exit); diff --git a/package/linux/kernel-source/drivers/mtd/maps/bcm947xx-flash.c b/package/linux/kernel-source/drivers/mtd/maps/bcm947xx-flash.c new file mode 100644 index 000000000..716867ff1 --- /dev/null +++ b/package/linux/kernel-source/drivers/mtd/maps/bcm947xx-flash.c @@ -0,0 +1,236 @@ +/* + * Flash mapping for BCM947XX boards + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <asm/io.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> +#include <linux/mtd/partitions.h> +#include <linux/config.h> + +#include <typedefs.h> +#include <bcmnvram.h> +#include <bcmutils.h> +#include <sbconfig.h> +#include <sbchipc.h> +#include <sbutils.h> +#include <trxhdr.h> + +/* Global SB handle */ +extern void *bcm947xx_sbh; +extern spinlock_t bcm947xx_sbh_lock; + +/* Convenience */ +#define sbh bcm947xx_sbh +#define sbh_lock bcm947xx_sbh_lock + +#ifdef CONFIG_MTD_PARTITIONS +extern struct mtd_partition * init_mtd_partitions(struct mtd_info *mtd, size_t size); +#endif + +#define WINDOW_ADDR 0x1fc00000 +#define WINDOW_SIZE 0x400000 +#define BUSWIDTH 2 + +/* e.g., flash=2M or flash=4M */ +static int flash = 0; +MODULE_PARM(flash, "i"); +static int __init +bcm947xx_setup(char *str) +{ + flash = memparse(str, &str); + return 1; +} +__setup("flash=", bcm947xx_setup); + +static struct mtd_info *bcm947xx_mtd; + +__u8 bcm947xx_map_read8(struct map_info *map, unsigned long ofs) +{ + if (map->map_priv_2 == 1) + return __raw_readb(map->map_priv_1 + ofs); + + u16 val = __raw_readw(map->map_priv_1 + (ofs & ~1)); + if (ofs & 1) + return ((val >> 8) & 0xff); + else + return (val & 0xff); +} + +__u16 bcm947xx_map_read16(struct map_info *map, unsigned long ofs) +{ + return __raw_readw(map->map_priv_1 + ofs); +} + +__u32 bcm947xx_map_read32(struct map_info *map, unsigned long ofs) +{ + return __raw_readl(map->map_priv_1 + ofs); +} + +void bcm947xx_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) +{ + if (len==1) { + memcpy_fromio(to, map->map_priv_1 + from, len); + } else { + int i; + u16 *dest = (u16 *) to; + u16 *src = (u16 *) (map->map_priv_1 + from); + for (i = 0; i < (len / 2); i++) { + dest[i] = src[i]; + } + if (len & 1) + *((u8 *)dest+len-1) = src[i] & 0xff; + } +} + +void bcm947xx_map_write8(struct map_info *map, __u8 d, unsigned long adr) +{ + __raw_writeb(d, map->map_priv_1 + adr); + mb(); +} + +void bcm947xx_map_write16(struct map_info *map, __u16 d, unsigned long adr) +{ + __raw_writew(d, map->map_priv_1 + adr); + mb(); +} + +void bcm947xx_map_write32(struct map_info *map, __u32 d, unsigned long adr) +{ + __raw_writel(d, map->map_priv_1 + adr); + mb(); +} + +void bcm947xx_map_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) +{ + memcpy_toio(map->map_priv_1 + to, from, len); +} + +struct map_info bcm947xx_map = { + name: "Physically mapped flash", + size: WINDOW_SIZE, + buswidth: BUSWIDTH, + read8: bcm947xx_map_read8, + read16: bcm947xx_map_read16, + read32: bcm947xx_map_read32, + copy_from: bcm947xx_map_copy_from, + write8: bcm947xx_map_write8, + write16: bcm947xx_map_write16, + write32: bcm947xx_map_write32, + copy_to: bcm947xx_map_copy_to +}; + +#if LINUX_VERSION_CODE < 0x20212 && defined(MODULE) +#define init_bcm947xx_map init_module +#define cleanup_bcm947xx_map cleanup_module +#endif + +mod_init_t init_bcm947xx_map(void) +{ + ulong flags; + uint coreidx; + chipcregs_t *cc; + uint32 fltype; + uint window_addr = 0, window_size = 0; + size_t size; + int ret = 0; +#ifdef CONFIG_MTD_PARTITIONS + struct mtd_partition *parts; + int i; +#endif + + spin_lock_irqsave(&sbh_lock, flags); + coreidx = sb_coreidx(sbh); + + /* Check strapping option if chipcommon exists */ + if ((cc = sb_setcore(sbh, SB_CC, 0))) { + fltype = readl(&cc->capabilities) & CAP_FLASH_MASK; + if (fltype == PFLASH) { + bcm947xx_map.map_priv_2 = 1; + window_addr = 0x1c000000; + bcm947xx_map.size = window_size = 32 * 1024 * 1024; + if ((readl(&cc->flash_config) & CC_CFG_DS) == 0) + bcm947xx_map.buswidth = 1; + } + } else { + fltype = PFLASH; + bcm947xx_map.map_priv_2 = 0; + window_addr = WINDOW_ADDR; + window_size = WINDOW_SIZE; + } + + sb_setcoreidx(sbh, coreidx); + spin_unlock_irqrestore(&sbh_lock, flags); + + if (fltype != PFLASH) { + printk(KERN_ERR "pflash: found no supported devices\n"); + ret = -ENODEV; + goto fail; + } + + bcm947xx_map.map_priv_1 = (unsigned long) ioremap(window_addr, window_size); + if (!bcm947xx_map.map_priv_1) { + printk(KERN_ERR "pflash: ioremap failed\n"); + ret = -EIO; + goto fail; + } + + if (!(bcm947xx_mtd = do_map_probe("cfi_probe", &bcm947xx_map))) { + printk(KERN_ERR "pflash: cfi_probe failed\n"); + ret = -ENXIO; + goto fail; + } + + bcm947xx_mtd->module = THIS_MODULE; + + /* Allow size override for testing */ + size = flash ? : bcm947xx_mtd->size; + + printk(KERN_NOTICE "Flash device: 0x%x at 0x%x\n", size, window_addr); + +#ifdef CONFIG_MTD_PARTITIONS + parts = init_mtd_partitions(bcm947xx_mtd, size); + for (i = 0; parts[i].name; i++); + ret = add_mtd_partitions(bcm947xx_mtd, parts, i); + if (ret) { + printk(KERN_ERR "pflash: add_mtd_partitions failed\n"); + goto fail; + } +#endif + + return 0; + + fail: + if (bcm947xx_mtd) + map_destroy(bcm947xx_mtd); + if (bcm947xx_map.map_priv_1) + iounmap((void *) bcm947xx_map.map_priv_1); + bcm947xx_map.map_priv_1 = 0; + return ret; +} + +mod_exit_t cleanup_bcm947xx_map(void) +{ +#ifdef CONFIG_MTD_PARTITIONS + del_mtd_partitions(bcm947xx_mtd); +#endif + map_destroy(bcm947xx_mtd); + iounmap((void *) bcm947xx_map.map_priv_1); + bcm947xx_map.map_priv_1 = 0; +} + +module_init(init_bcm947xx_map); +module_exit(cleanup_bcm947xx_map); diff --git a/package/linux/kernel-source/drivers/net/diag/Makefile b/package/linux/kernel-source/drivers/net/diag/Makefile new file mode 100644 index 000000000..e00f095f9 --- /dev/null +++ b/package/linux/kernel-source/drivers/net/diag/Makefile @@ -0,0 +1,9 @@ +O_TARGET := diag.o + +MAC_OBJS := diag_led.o + +export-objs := +obj-y := $(MAC_OBJS) +obj-m := $(O_TARGET) + +include $(TOPDIR)/Rules.make diff --git a/package/linux/kernel-source/drivers/net/diag/diag_led.c b/package/linux/kernel-source/drivers/net/diag/diag_led.c new file mode 100644 index 000000000..41cb17bf4 --- /dev/null +++ b/package/linux/kernel-source/drivers/net/diag/diag_led.c @@ -0,0 +1,210 @@ +// replacement diag module +// (c) 2004 openwrt +// mbm at alt dot org +// +// initial release 2004/03/28 +// +// 2004/08/26 asus & buffalo support added + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/sysctl.h> +#include <asm/io.h> +#include <typedefs.h> +#include <bcm4710.h> +#include <sbutils.h> + +extern char * nvram_get(const char *name); +static void *sbh; + +// v2.x - - - - - +#define DIAG_GPIO (1<<1) +#define DMZ_GPIO (1<<7) + +static void set_gpio(uint32 mask, uint32 value) { + sb_gpiocontrol(sbh,mask,0); + sb_gpioouten(sbh,mask,mask); + sb_gpioout(sbh,mask,value); +} + +static void v2_set_diag(u8 state) { + set_gpio(DIAG_GPIO,state); +} +static void v2_set_dmz(u8 state) { + set_gpio(DMZ_GPIO,state); +} + +// v1.x - - - - - +#define LED_DIAG 0x13 +#define LED_DMZ 0x12 + +static void v1_set_diag(u8 state) { + if (!state) { + *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG)=0xFF; + } else { + *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG); + } +} +static void v1_set_dmz(u8 state) { + if (!state) { + *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ)=0xFF; + } else { + *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ); + } +} + +// - - - - - +static void ignore(u8 ignored) {}; + +// - - - - - +#define BIT_DMZ 0x01 +#define BIT_DIAG 0x04 + +void (*set_diag)(u8 state); +void (*set_dmz)(u8 state); + +static unsigned int diag = 0; + +static void diag_change() +{ + //printk(KERN_INFO "led -> %02x\n",diag); + + set_diag(0xFF); // off + set_dmz(0xFF); // off + + if(diag & BIT_DIAG) + set_diag(0x00); // on + if(diag & BIT_DMZ) + set_dmz(0x00); // on +} + +static int proc_diag(ctl_table *table, int write, struct file *filp, + void *buffer, size_t *lenp) +{ + int r; + r = proc_dointvec(table, write, filp, buffer, lenp); + if (write && !r) { + diag_change(); + } + return r; +} + +// - - - - - +static unsigned char reset_gpio = 0; +static unsigned char reset_polarity = 0; +static unsigned int reset = 0; + +static int proc_reset(ctl_table *table, int write, struct file *filp, + void *buffer, size_t *lenp) +{ + + if (reset_gpio) { + sb_gpiocontrol(sbh,reset_gpio,reset_gpio); + sb_gpioouten(sbh,reset_gpio,0); + reset=!(sb_gpioin(sbh)&reset_gpio); + + if (reset_polarity) reset=!reset; + } else { + reset=0; + } + + return proc_dointvec(table, write, filp, buffer, lenp); +} + +// - - - - - +static struct ctl_table_header *diag_sysctl_header; + +static ctl_table sys_diag[] = { + { + ctl_name: 2000, + procname: "diag", + data: &diag, + maxlen: sizeof(diag), + mode: 0644, + proc_handler: proc_diag + }, + { + ctl_name: 2001, + procname: "reset", + data: &reset, + maxlen: sizeof(reset), + mode: 0444, + proc_handler: proc_reset + }, + { 0 } +}; + +static int __init diag_init() +{ + char *buf; + u32 board_type; + sbh = sb_kattach(); + sb_gpiosetcore(sbh); + + board_type = sb_boardtype(sbh); + printk(KERN_INFO "diag boardtype: %08x\n",board_type); + + set_diag=ignore; + set_dmz=ignore; + + if ((board_type & 0xf00) == 0x400) { + board_type=1; + buf=nvram_get("boardtype")?:""; + if (!strcmp(buf,"bcm94710dev")) { + buf=nvram_get("boardnum")?:""; + if (!strcmp(buf,"42")) { + // wrt54g v1.x + set_diag=v1_set_diag; + set_dmz=v1_set_dmz; + reset_gpio=(1<<6); + reset_polarity=0; + } else if (!strcmp(buf,"asusX")) { + //asus wl-500g + //no leds + reset_gpio=(1<<6); + reset_polarity=1; + } + } else if (!strcmp(buf,"bcm94710ap")) { + buf=nvram_get("boardnum")?:""; + if (!strcmp(buf,"42")) { + // buffalo + set_dmz=v2_set_dmz; + reset_gpio=(1<<4); + reset_polarity=1; + } else if (!strcmp(buf,"44")) { + //dell truemobile + set_dmz=v2_set_dmz; + reset_gpio=(1<<0); + reset_polarity=0; + } + } + } else { + board_type=2; + set_diag=v2_set_diag; + set_dmz=v2_set_dmz; + reset_gpio=(1<<6); + reset_polarity=0; + buf=nvram_get("boardnum")?:""; + if (!strcmp(buf,"44")) { + set_diag=ignore; + set_dmz=ignore; + reset_gpio=(1<<5); + reset_polarity=0; + } + } + printk(KERN_INFO "using v%d hardware\n",board_type); + + diag_sysctl_header = register_sysctl_table(sys_diag, 0); + diag_change(); + + return 0; +} + +static void __exit diag_exit() +{ + unregister_sysctl_table(diag_sysctl_header); +} + +module_init(diag_init); +module_exit(diag_exit); diff --git a/package/linux/kernel-source/drivers/net/et/Makefile b/package/linux/kernel-source/drivers/net/et/Makefile new file mode 100644 index 000000000..152b18e9a --- /dev/null +++ b/package/linux/kernel-source/drivers/net/et/Makefile @@ -0,0 +1,34 @@ +# +# Makefile for the Broadcom et driver +# +# Copyright 2004, Broadcom Corporation +# All Rights Reserved. +# +# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY +# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM +# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS +# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. +# +# $Id$ +# + +O_TARGET := et.o + +ET_OBJS := et_linux.o etc.o + +ifeq ($(CONFIG_ET_47XX),y) +ET_OBJS += etc47xx.o etc_robo.o etc_adm.o +EXTRA_CFLAGS += -DBCM47XX_CHOPS +endif +ifeq ($(CONFIG_ET_4413),y) +ET_OBJS += etc4413.o +EXTRA_CFLAGS += -DBCM4413_CHOPS +endif + +export-objs := +obj-y := $(ET_OBJS) +obj-m := $(O_TARGET) + +EXTRA_CFLAGS += -DDMA + +include $(TOPDIR)/Rules.make diff --git a/package/linux/kernel-source/drivers/net/hnd/Config.in b/package/linux/kernel-source/drivers/net/hnd/Config.in new file mode 100644 index 000000000..5ced207f3 --- /dev/null +++ b/package/linux/kernel-source/drivers/net/hnd/Config.in @@ -0,0 +1,35 @@ +# +# Broadcom Home Networking Division (HND) driver configuration +# +# Copyright 2004, Broadcom Corporation +# All Rights Reserved. +# +# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY +# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM +# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS +# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. +# + +mainmenu_option next_comment +comment 'Broadcom HND network devices' + tristate 'Broadcom HND network device support' CONFIG_HND $CONFIG_PCI + if [ "$CONFIG_HND" != "n" ]; then + dep_tristate ' Broadcom InsideLine HPNA support' CONFIG_IL $CONFIG_HND + if [ "$CONFIG_IL" != "n" ]; then + bool ' Broadcom BCM42xx support' CONFIG_IL_42XX + bool ' Broadcom BCM47xx support' CONFIG_IL_47XX + int ' LARQ buffer allocation (0 = tiny, 2 = huge)' CONFIG_LARQ_BUF 0 + fi + dep_tristate ' Broadcom 10/100 Ethernet support' CONFIG_ET $CONFIG_HND + if [ "$CONFIG_ET" != "n" ]; then + bool ' Broadcom BCM4413 support' CONFIG_ET_4413 + bool ' Broadcom BCM47xx support' CONFIG_ET_47XX + fi + dep_tristate ' Broadcom BCM43xx 802.11 Wireless support' CONFIG_WL $CONFIG_HND + if [ "$CONFIG_WL" != "n" ]; then + bool ' Access Point Mode Supported' CONFIG_WL_AP + bool ' STA Mode Supported' CONFIG_WL_STA + bool ' OID Interface Supported' CONFIG_WL_OID + fi + fi +endmenu diff --git a/package/linux/kernel-source/drivers/net/hnd/Makefile b/package/linux/kernel-source/drivers/net/hnd/Makefile new file mode 100644 index 000000000..5adaa5abe --- /dev/null +++ b/package/linux/kernel-source/drivers/net/hnd/Makefile @@ -0,0 +1,30 @@ +# +# Makefile for Broadcom Home Networking Division (HND) shared driver code +# +# Copyright 2004, Broadcom Corporation +# All Rights Reserved. +# +# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY +# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM +# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS +# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. +# +# $Id$ +# + +O_TARGET := hnd.o + +HND_OBJS := bcmutils.o hnddma.o linux_osl.o sbutils.o bcmsrom.o + +ifneq ($(CONFIG_BCM947XX),y) +HND_OBJS += nvramstubs.o +endif + +export-objs := shared_ksyms.o +obj-y := shared_ksyms.o $(HND_OBJS) +obj-m := $(O_TARGET) + +include $(TOPDIR)/Rules.make + +shared_ksyms.c: shared_ksyms.sh $(HND_OBJS) + sh -e $< $(HND_OBJS) > $@ diff --git a/package/linux/kernel-source/drivers/net/hnd/bcmsrom.c b/package/linux/kernel-source/drivers/net/hnd/bcmsrom.c new file mode 100644 index 000000000..8a0f05d95 --- /dev/null +++ b/package/linux/kernel-source/drivers/net/hnd/bcmsrom.c @@ -0,0 +1,711 @@ +/* + * Misc useful routines to access NIC SROM + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * $Id$ + */ + +#include <typedefs.h> +#include <osl.h> +#include <bcmutils.h> +#include <bcmsrom.h> +#include <bcmdevs.h> +#include <bcmendian.h> +#include <sbpcmcia.h> +#include <pcicfg.h> +#include <sbutils.h> + +#include <proto/ethernet.h> /* for sprom content groking */ + +#define VARS_MAX 4096 /* should be reduced */ + +static int initvars_srom_pci(void *curmap, char **vars, int *count); +static int initvars_cis_pcmcia(void *sbh, void *curmap, void *osh, char **vars, int *count); +static int sprom_cmd_pcmcia(void *osh, uint8 cmd); +static int sprom_read_pcmcia(void *osh, uint16 addr, uint16 *data); +static int sprom_write_pcmcia(void *osh, uint16 addr, uint16 data); +static int sprom_read_pci(uint16 *sprom, uint byteoff, uint16 *buf, uint nbytes, bool check_crc); + +/* + * Initialize the vars from the right source for this platform. + * Return 0 on success, nonzero on error. + */ +int +srom_var_init(void *sbh, uint bus, void *curmap, void *osh, char **vars, int *count) +{ + if (vars == NULL) + return (0); + + switch (bus) { + case SB_BUS: + /* These two could be asserts ... */ + *vars = NULL; + *count = 0; + return(0); + + case PCI_BUS: + ASSERT(curmap); /* can not be NULL */ + return(initvars_srom_pci(curmap, vars, count)); + + case PCMCIA_BUS: + return(initvars_cis_pcmcia(sbh, curmap, osh, vars, count)); + + + default: + ASSERT(0); + } + return (-1); +} + + +/* support only 16-bit word read from srom */ +int +srom_read(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf) +{ + void *srom; + uint i, off, nw; + + /* check input - 16-bit access only */ + if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2)) + return 1; + + if (bus == PCI_BUS) { + if (!curmap) + return 1; + srom = (void *)((uint)curmap + PCI_BAR0_SPROM_OFFSET); + if (sprom_read_pci(srom, byteoff, buf, nbytes, FALSE)) + return 1; + } else if (bus == PCMCIA_BUS) { + off = byteoff / 2; + nw = nbytes / 2; + for (i = 0; i < nw; i++) { + if (sprom_read_pcmcia(osh, (uint16)(off + i), (uint16*)(buf + i))) + return 1; + } + } else { + return 1; + } + + return 0; +} + +/* support only 16-bit word write into srom */ +int +srom_write(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf) +{ + uint16 *srom; + uint i, off, nw, crc_range; + uint16 image[SPROM_SIZE], *p; + uint8 crc; + volatile uint32 val32; + + /* check input - 16-bit access only */ + if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2)) + return 1; + + crc_range = ((bus == PCMCIA_BUS) ? SPROM_SIZE : SPROM_CRC_RANGE) * 2; + + /* if changes made inside crc cover range */ + if (byteoff < crc_range) { + nw = (((byteoff + nbytes) > crc_range) ? byteoff + nbytes : crc_range) / 2; + /* read data including entire first 64 words from srom */ + if (srom_read(bus, curmap, osh, 0, nw * 2, image)) + return 1; + /* make changes */ + bcopy((void*)buf, (void*)&image[byteoff / 2], nbytes); + /* calculate crc */ + htol16_buf(image, crc_range); + crc = ~crc8((uint8 *)image, crc_range - 1, CRC8_INIT_VALUE); + ltoh16_buf(image, crc_range); + image[(crc_range / 2) - 1] = (crc << 8) | (image[(crc_range / 2) - 1] & 0xff); + p = image; + off = 0; + } else { + p = buf; + off = byteoff / 2; + nw = nbytes / 2; + } + + if (bus == PCI_BUS) { + srom = (uint16*)((uint)curmap + PCI_BAR0_SPROM_OFFSET); + /* enable writes to the SPROM */ + val32 = OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32)); + val32 |= SPROM_WRITEEN; + OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32); + bcm_mdelay(500); + /* write srom */ + for (i = 0; i < nw; i++) { + W_REG(&srom[off + i], p[i]); + bcm_mdelay(20); + } + /* disable writes to the SPROM */ + OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32 & ~SPROM_WRITEEN); + } else if (bus == PCMCIA_BUS) { + /* enable writes to the SPROM */ + if (sprom_cmd_pcmcia(osh, SROM_WEN)) + return 1; + bcm_mdelay(500); + /* write srom */ + for (i = 0; i < nw; i++) { + sprom_write_pcmcia(osh, (uint16)(off + i), p[i]); + bcm_mdelay(20); + } + /* disable writes to the SPROM */ + if (sprom_cmd_pcmcia(osh, SROM_WDS)) + return 1; + } else { + return 1; + } + + bcm_mdelay(500); + return 0; +} + + +int +srom_parsecis(uint8 *cis, char **vars, int *count) +{ + char eabuf[32]; + char *vp, *base; + uint8 tup, tlen, sromrev = 1; + int i, j; + uint varsize; + bool ag_init = FALSE; + uint16 w; + + ASSERT(vars); + ASSERT(count); + + base = vp = MALLOC(VARS_MAX); + ASSERT(vp); + + i = 0; + do { + tup = cis[i++]; + tlen = cis[i++]; + if ((i + tlen) >= CIS_SIZE) + break; + + switch (tup) { + case CISTPL_MANFID: + vp += sprintf(vp, "manfid=%d", (cis[i + 1] << 8) + cis[i]); + vp++; + vp += sprintf(vp, "prodid=%d", (cis[i + 3] << 8) + cis[i + 2]); + vp++; + break; + + case CISTPL_FUNCE: + if (cis[i] == LAN_NID) { + ASSERT(cis[i + 1] == ETHER_ADDR_LEN); + bcm_ether_ntoa((uchar*)&cis[i + 2], eabuf); + vp += sprintf(vp, "il0macaddr=%s", eabuf); + vp++; + } + break; + + case CISTPL_CFTABLE: + vp += sprintf(vp, "regwindowsz=%d", (cis[i + 7] << 8) | cis[i + 6]); + vp++; + break; + + case CISTPL_BRCM_HNBU: + switch (cis[i]) { + case HNBU_CHIPID: + vp += sprintf(vp, "vendid=%d", (cis[i + 2] << 8) + cis[i + 1]); + vp++; + vp += sprintf(vp, "devid=%d", (cis[i + 4] << 8) + cis[i + 3]); + vp++; + if (tlen == 7) { + vp += sprintf(vp, "chiprev=%d", (cis[i + 6] << 8) + cis[i + 5]); + vp++; + } + break; + + case HNBU_BOARDREV: + vp += sprintf(vp, "boardrev=%d", cis[i + 1]); + vp++; + break; + + case HNBU_AA: + vp += sprintf(vp, "aa0=%d", cis[i + 1]); + vp++; + break; + + case HNBU_AG: + vp += sprintf(vp, "ag0=%d", cis[i + 1]); + vp++; + ag_init = TRUE; + break; + + case HNBU_CC: + vp += sprintf(vp, "cc=%d", cis[i + 1]); + vp++; + break; + + case HNBU_PAPARMS: + vp += sprintf(vp, "pa0maxpwr=%d", cis[i + tlen - 1]); + vp++; + if (tlen == 9) { + /* New version */ + for (j = 0; j < 3; j++) { + vp += sprintf(vp, "pa0b%d=%d", j, + (cis[i + (j * 2) + 2] << 8) + cis[i + (j * 2) + 1]); + vp++; + } + vp += sprintf(vp, "pa0itssit=%d", cis[i + 7]); + vp++; + } + break; + + case HNBU_OEM: + vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x", + cis[i + 1], cis[i + 2], cis[i + 3], cis[i + 4], + cis[i + 5], cis[i + 6], cis[i + 7], cis[i + 8]); + vp++; + break; + case HNBU_BOARDFLAGS: + w = (cis[i + 2] << 8) + cis[i + 1]; + if (w == 0xffff) w = 0; + vp += sprintf(vp, "boardflags=%d", w); + vp++; + break; + case HNBU_LED: + if (cis[i + 1] != 0xff) { + vp += sprintf(vp, "wl0gpio0=%d", cis[i + 1]); + vp++; + } + if (cis[i + 2] != 0xff) { + vp += sprintf(vp, "wl0gpio1=%d", cis[i + 2]); + vp++; + } + if (cis[i + 3] != 0xff) { + vp += sprintf(vp, "wl0gpio2=%d", cis[i + 3]); + vp++; + } + if (cis[i + 4] != 0xff) { + vp += sprintf(vp, "wl0gpio3=%d", cis[i + 4]); + vp++; + } + break; + } + break; + + } + i += tlen; + } while (tup != 0xff); + + /* Set the srom version */ + vp += sprintf(vp, "sromrev=%d", sromrev); + vp++; + + /* For now just set boardflags2 to zero */ + vp += sprintf(vp, "boardflags2=0"); + vp++; + + /* if there is no antenna gain field, set default */ + if (ag_init == FALSE) { + vp += sprintf(vp, "ag0=%d", 0xff); + vp++; + } + + /* final nullbyte terminator */ + *vp++ = '\0'; + varsize = (uint)vp - (uint)base; + + ASSERT(varsize < VARS_MAX); + + if (varsize == VARS_MAX) { + *vars = base; + } else { + vp = MALLOC(varsize); + ASSERT(vp); + bcopy(base, vp, varsize); + MFREE(base, VARS_MAX); + *vars = vp; + } + *count = varsize; + + return (0); +} + + +/* set PCMCIA sprom command register */ +static int +sprom_cmd_pcmcia(void *osh, uint8 cmd) +{ + uint8 status; + uint wait_cnt = 1000; + + /* write sprom command register */ + OSL_PCMCIA_WRITE_ATTR(osh, SROM_CS, &cmd, 1); + + /* wait status */ + while (wait_cnt--) { + OSL_PCMCIA_READ_ATTR(osh, SROM_CS, &status, 1); + if (status & SROM_DONE) + return 0; + } + + return 1; +} + +/* read a word from the PCMCIA srom */ +static int +sprom_read_pcmcia(void *osh, uint16 addr, uint16 *data) +{ + uint8 addr_l, addr_h, data_l, data_h; + + addr_l = (uint8)((addr * 2) & 0xff); + addr_h = (uint8)(((addr * 2) >> 8) & 0xff); + + /* set address */ + OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1); + OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1); + + /* do read */ + if (sprom_cmd_pcmcia(osh, SROM_READ)) + return 1; + + /* read data */ + OSL_PCMCIA_READ_ATTR(osh, SROM_DATAH, &data_h, 1); + OSL_PCMCIA_READ_ATTR(osh, SROM_DATAL, &data_l, 1); + + *data = (data_h << 8) | data_l; + return 0; +} + +/* write a word to the PCMCIA srom */ +static int +sprom_write_pcmcia(void *osh, uint16 addr, uint16 data) +{ + uint8 addr_l, addr_h, data_l, data_h; + + addr_l = (uint8)((addr * 2) & 0xff); + addr_h = (uint8)(((addr * 2) >> 8) & 0xff); + data_l = (uint8)(data & 0xff); + data_h = (uint8)((data >> 8) & 0xff); + + /* set address */ + OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1); + OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1); + + /* write data */ + OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAH, &data_h, 1); + OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAL, &data_l, 1); + + /* do write */ + return sprom_cmd_pcmcia(osh, SROM_WRITE); +} + +/* + * Read in and validate sprom. + * Return 0 on success, nonzero on error. + */ +static int +sprom_read_pci(uint16 *sprom, uint byteoff, uint16 *buf, uint nbytes, bool check_crc) +{ + int off, nw; + uint8 chk8; + int i; + + off = byteoff / 2; + nw = ROUNDUP(nbytes, 2) / 2; + + /* read the sprom */ + for (i = 0; i < nw; i++) + buf[i] = R_REG(&sprom[off + i]); + + if (check_crc) { + /* fixup the endianness so crc8 will pass */ + htol16_buf(buf, nw * 2); + if ((chk8 = crc8((uchar*)buf, nbytes, CRC8_INIT_VALUE)) != CRC8_GOOD_VALUE) + return (1); + /* now correct the endianness of the byte array */ + ltoh16_buf(buf, nw * 2); + } + + return (0); +} + +/* + * Initialize nonvolatile variable table from sprom. + * Return 0 on success, nonzero on error. + */ + +static int +initvars_srom_pci(void *curmap, char **vars, int *count) +{ + uint16 w, b[64]; + uint8 sromrev; + struct ether_addr ea; + char eabuf[32]; + uint32 bfl; + int c, woff, i; + char *vp, *base; + + if (sprom_read_pci((void *)((uint)curmap + PCI_BAR0_SPROM_OFFSET), 0, b, sizeof (b), TRUE)) + return (-1); + + /* top word of sprom contains version and crc8 */ + sromrev = b[63] & 0xff; + if ((sromrev != 1) && (sromrev != 2)) { + return (-2); + } + + ASSERT(vars); + ASSERT(count); + + base = vp = MALLOC(VARS_MAX); + ASSERT(vp); + + vp += sprintf(vp, "sromrev=%d", sromrev); + vp++; + + if (sromrev >= 2) { + /* New section takes over the 4th hardware function space */ + + /* Word 29 is max power 11a high/low */ + w = b[29]; + vp += sprintf(vp, "pa1himaxpwr=%d", w & 0xff); + vp++; + vp += sprintf(vp, "pa1lomaxpwr=%d", (w >> 8) & 0xff); + vp++; + + /* Words 30-32 set the 11alow pa settings, + * 33-35 are the 11ahigh ones. + */ + for (i = 0; i < 3; i++) { + vp += sprintf(vp, "pa1lob%d=%d", i, b[30 + i]); + vp++; + vp += sprintf(vp, "pa1hib%d=%d", i, b[33 + i]); + vp++; + } + w = b[59]; + if (w == 0) + vp += sprintf(vp, "ccode="); + else + vp += sprintf(vp, "ccode=%c%c", (w >> 8), (w & 0xff)); + vp++; + + } + + /* parameter section of sprom starts at byte offset 72 */ + woff = 72/2; + + /* first 6 bytes are il0macaddr */ + ea.octet[0] = (b[woff] >> 8) & 0xff; + ea.octet[1] = b[woff] & 0xff; + ea.octet[2] = (b[woff+1] >> 8) & 0xff; + ea.octet[3] = b[woff+1] & 0xff; + ea.octet[4] = (b[woff+2] >> 8) & 0xff; + ea.octet[5] = b[woff+2] & 0xff; + woff += ETHER_ADDR_LEN/2 ; + bcm_ether_ntoa((uchar*)&ea, eabuf); + vp += sprintf(vp, "il0macaddr=%s", eabuf); + vp++; + + /* next 6 bytes are et0macaddr */ + ea.octet[0] = (b[woff] >> 8) & 0xff; + ea.octet[1] = b[woff] & 0xff; + ea.octet[2] = (b[woff+1] >> 8) & 0xff; + ea.octet[3] = b[woff+1] & 0xff; + ea.octet[4] = (b[woff+2] >> 8) & 0xff; + ea.octet[5] = b[woff+2] & 0xff; + woff += ETHER_ADDR_LEN/2 ; + bcm_ether_ntoa((uchar*)&ea, eabuf); + vp += sprintf(vp, "et0macaddr=%s", eabuf); + vp++; + + /* next 6 bytes are et1macaddr */ + ea.octet[0] = (b[woff] >> 8) & 0xff; + ea.octet[1] = b[woff] & 0xff; + ea.octet[2] = (b[woff+1] >> 8) & 0xff; + ea.octet[3] = b[woff+1] & 0xff; + ea.octet[4] = (b[woff+2] >> 8) & 0xff; + ea.octet[5] = b[woff+2] & 0xff; + woff += ETHER_ADDR_LEN/2 ; + bcm_ether_ntoa((uchar*)&ea, eabuf); + vp += sprintf(vp, "et1macaddr=%s", eabuf); + vp++; + + /* + * Enet phy settings one or two singles or a dual + * Bits 4-0 : MII address for enet0 (0x1f for not there) + * Bits 9-5 : MII address for enet1 (0x1f for not there) + * Bit 14 : Mdio for enet0 + * Bit 15 : Mdio for enet1 + */ + w = b[woff]; + vp += sprintf(vp, "et0phyaddr=%d", (w & 0x1f)); + vp++; + vp += sprintf(vp, "et1phyaddr=%d", ((w >> 5) & 0x1f)); + vp++; + vp += sprintf(vp, "et0mdcport=%d", ((w >> 14) & 0x1)); + vp++; + vp += sprintf(vp, "et1mdcport=%d", ((w >> 15) & 0x1)); + vp++; + + /* Word 46 has board rev, antennas 0/1 & Country code/control */ + w = b[46]; + vp += sprintf(vp, "boardrev=%d", w & 0xff); + vp++; + + if (sromrev > 1) + vp += sprintf(vp, "cctl=%d", (w >> 8) & 0xf); + else + vp += sprintf(vp, "cc=%d", (w >> 8) & 0xf); + vp++; + + vp += sprintf(vp, "aa0=%d", (w >> 12) & 0x3); + vp++; + + vp += sprintf(vp, "aa1=%d", (w >> 14) & 0x3); + vp++; + + /* Words 47-49 set the (wl) pa settings */ + woff = 47; + + for (i = 0; i < 3; i++) { + vp += sprintf(vp, "pa0b%d=%d", i, b[woff+i]); + vp++; + vp += sprintf(vp, "pa1b%d=%d", i, b[woff+i+6]); + vp++; + } + + /* + * Words 50-51 set the customer-configured wl led behavior. + * 8 bits/gpio pin. High bit: activehi=0, activelo=1; + * LED behavior values defined in wlioctl.h . + */ + w = b[50]; + if ((w != 0) && (w != 0xffff)) { + /* gpio0 */ + vp += sprintf(vp, "wl0gpio0=%d", (w & 0xff)); + vp++; + + /* gpio1 */ + vp += sprintf(vp, "wl0gpio1=%d", (w >> 8) & 0xff); + vp++; + } + w = b[51]; + if ((w != 0) && (w != 0xffff)) { + /* gpio2 */ + vp += sprintf(vp, "wl0gpio2=%d", w & 0xff); + vp++; + + /* gpio3 */ + vp += sprintf(vp, "wl0gpio3=%d", (w >> 8) & 0xff); + vp++; + } + + /* Word 52 is max power 0/1 */ + w = b[52]; + vp += sprintf(vp, "pa0maxpwr=%d", w & 0xff); + vp++; + vp += sprintf(vp, "pa1maxpwr=%d", (w >> 8) & 0xff); + vp++; + + /* Word 56 is idle tssi target 0/1 */ + w = b[56]; + vp += sprintf(vp, "pa0itssit=%d", w & 0xff); + vp++; + vp += sprintf(vp, "pa1itssit=%d", (w >> 8) & 0xff); + vp++; + + /* Word 57 is boardflags, if not programmed make it zero */ + bfl = (uint32)b[57]; + if (bfl == 0xffff) bfl = 0; + if (sromrev > 1) { + /* Word 28 is boardflags2 */ + bfl |= (uint32)b[28] << 16; + } + vp += sprintf(vp, "boardflags=%d", bfl); + vp++; + + /* Word 58 is antenna gain 0/1 */ + w = b[58]; + vp += sprintf(vp, "ag0=%d", w & 0xff); + vp++; + + vp += sprintf(vp, "ag1=%d", (w >> 8) & 0xff); + vp++; + + if (sromrev == 1) { + /* set the oem string */ + vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x", + ((b[59] >> 8) & 0xff), (b[59] & 0xff), + ((b[60] >> 8) & 0xff), (b[60] & 0xff), + ((b[61] >> 8) & 0xff), (b[61] & 0xff), + ((b[62] >> 8) & 0xff), (b[62] & 0xff)); + vp++; + } else { + if (sromrev >= 1){ + /* Word 60 OFDM tx power offset from CCK level */ + /* OFDM Power Offset - opo */ + w = b[60] & 0xff; + if (w == 0xff) + w = 16; + vp += sprintf(vp, "opo=%d", w); + vp++; + } + } + + /* final nullbyte terminator */ + *vp++ = '\0'; + + c = vp - base; + ASSERT(c <= VARS_MAX); + + if (c == VARS_MAX) { + *vars = base; + } else { + vp = MALLOC(c); + ASSERT(vp); + bcopy(base, vp, c); + MFREE(base, VARS_MAX); + *vars = vp; + } + *count = c; + + return (0); +} + +/* + * Read the cis and call parsecis to initialize the vars. + * Return 0 on success, nonzero on error. + */ +static int +initvars_cis_pcmcia(void *sbh, void *curmap, void *osh, char **vars, int *count) +{ + uint8 *cis = NULL; + int rc; + uint data_sz; + + data_sz = (sb_pcmciarev(sbh) == 1) ? (SPROM_SIZE * 2) : CIS_SIZE; + + if ((cis = MALLOC(data_sz)) == NULL) + return (-1); + + if (sb_pcmciarev(sbh) == 1) { + if (srom_read(PCMCIA_BUS, (void *)NULL, osh, 0, data_sz, (uint16 *)cis)) { + MFREE(cis, data_sz); + return (-1); + } + /* fix up endianess for 16-bit data vs 8-bit parsing */ + ltoh16_buf((uint16 *)cis, data_sz); + } else + OSL_PCMCIA_READ_ATTR(osh, 0, cis, data_sz); + + rc = srom_parsecis(cis, vars, count); + + MFREE(cis, data_sz); + + return (rc); +} + diff --git a/package/linux/kernel-source/drivers/net/hnd/bcmutils.c b/package/linux/kernel-source/drivers/net/hnd/bcmutils.c new file mode 100644 index 000000000..0b704d41b --- /dev/null +++ b/package/linux/kernel-source/drivers/net/hnd/bcmutils.c @@ -0,0 +1,803 @@ +/* + * Misc useful OS-independent routines. + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * $Id$ + */ + +#include <typedefs.h> +#include <osl.h> +#include <bcmutils.h> +#include <bcmendian.h> +#include <bcmnvram.h> + +unsigned char bcm_ctype[] = { + _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 0-7 */ + _BCM_C,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C,_BCM_C, /* 8-15 */ + _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 16-23 */ + _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 24-31 */ + _BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 32-39 */ + _BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 40-47 */ + _BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D, /* 48-55 */ + _BCM_D,_BCM_D,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 56-63 */ + _BCM_P,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U, /* 64-71 */ + _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 72-79 */ + _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 80-87 */ + _BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 88-95 */ + _BCM_P,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L, /* 96-103 */ + _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 104-111 */ + _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 112-119 */ + _BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_C, /* 120-127 */ + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 128-143 */ + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 144-159 */ + _BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 160-175 */ + _BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 176-191 */ + _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 192-207 */ + _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_L, /* 208-223 */ + _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 224-239 */ + _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L /* 240-255 */ +}; + +uchar +bcm_toupper(uchar c) +{ + if (bcm_islower(c)) + c -= 'a'-'A'; + return (c); +} + +ulong +bcm_strtoul(char *cp, char **endp, uint base) +{ + ulong result, value; + bool minus; + + minus = FALSE; + + while (bcm_isspace(*cp)) + cp++; + + if (cp[0] == '+') + cp++; + else if (cp[0] == '-') { + minus = TRUE; + cp++; + } + + if (base == 0) { + if (cp[0] == '0') { + if ((cp[1] == 'x') || (cp[1] == 'X')) { + base = 16; + cp = &cp[2]; + } else { + base = 8; + cp = &cp[1]; + } + } else + base = 10; + } else if (base == 16 && (cp[0] == '0') && ((cp[1] == 'x') || (cp[1] == 'X'))) { + cp = &cp[2]; + } + + result = 0; + + while (bcm_isxdigit(*cp) && + (value = bcm_isdigit(*cp) ? *cp-'0' : bcm_toupper(*cp)-'A'+10) < base) { + result = result*base + value; + cp++; + } + + if (minus) + result = (ulong)(result * -1); + + if (endp) + *endp = (char *)cp; + + return (result); +} + +uint +bcm_atoi(char *s) +{ + uint n; + + n = 0; + + while (bcm_isdigit(*s)) + n = (n * 10) + *s++ - '0'; + return (n); +} + +void +deadbeef(char *p, uint len) +{ + static uchar meat[] = { 0xde, 0xad, 0xbe, 0xef }; + + while (len-- > 0) { + *p = meat[((uint)p) & 3]; + p++; + } +} + +/* pretty hex print a contiguous buffer */ +void +prhex(char *msg, uchar *buf, uint nbytes) +{ + char line[256]; + char* p; + uint i; + + if (msg && (msg[0] != '\0')) + printf("%s: ", msg); + + p = line; + for (i = 0; i < nbytes; i++) { + if (i % 16 == 0) { + p += sprintf(p, "%04d: ", i); /* line prefix */ + } + p += sprintf(p, "%02x ", buf[i]); + if (i % 16 == 15) { + printf("%s\n", line); /* flush line */ + p = line; + } + } + + /* flush last partial line */ + if (p != line) + printf("%s\n", line); +} + +/* pretty hex print a pkt buffer chain */ +void +prpkt(char *msg, void *drv, void *p0) +{ + void *p; + + if (msg && (msg[0] != '\0')) + printf("%s: ", msg); + + for (p = p0; p; p = PKTNEXT(drv, p)) + prhex(NULL, PKTDATA(drv, p), PKTLEN(drv, p)); +} + +/* copy a pkt buffer chain into a buffer */ +uint +pktcopy(void *drv, void *p, uint offset, int len, uchar *buf) +{ + uint n, ret = 0; + + if (len < 0) + len = 4096; /* "infinite" */ + + /* skip 'offset' bytes */ + for (; p && offset; p = PKTNEXT(drv, p)) { + if (offset < (uint)PKTLEN(drv, p)) + break; + offset -= PKTLEN(drv, p); + } + + if (!p) + return 0; + + /* copy the data */ + for (; p && len; p = PKTNEXT(drv, p)) { + n = MIN((uint)PKTLEN(drv, p) - offset, (uint)len); + bcopy(PKTDATA(drv, p) + offset, buf, n); + buf += n; + len -= n; + ret += n; + offset = 0; + } + + return ret; +} + +/* return total length of buffer chain */ +uint +pkttotlen(void *drv, void *p) +{ + uint total; + + total = 0; + for (; p; p = PKTNEXT(drv, p)) + total += PKTLEN(drv, p); + return (total); +} + + +uchar* +bcm_ether_ntoa(char *ea, char *buf) +{ + sprintf(buf,"%02x:%02x:%02x:%02x:%02x:%02x", + (uchar)ea[0]&0xff, (uchar)ea[1]&0xff, (uchar)ea[2]&0xff, + (uchar)ea[3]&0xff, (uchar)ea[4]&0xff, (uchar)ea[5]&0xff); + return (buf); +} + +/* parse a xx:xx:xx:xx:xx:xx format ethernet address */ +int +bcm_ether_atoe(char *p, char *ea) +{ + int i = 0; + + for (;;) { + ea[i++] = (char) bcm_strtoul(p, &p, 16); + if (!*p++ || i == 6) + break; + } + + return (i == 6); +} + +/* + * Advance from the current 1-byte tag/1-byte length/variable-length value + * triple, to the next, returning a pointer to the next. + */ +bcm_tlv_t * +bcm_next_tlv(bcm_tlv_t *elt, int *buflen) +{ + int len; + + /* validate current elt */ + if (*buflen < 2) { + return NULL; + } + + len = elt->len; + + /* validate remaining buflen */ + if (*buflen >= (2 + len + 2)) { + elt = (bcm_tlv_t*)(elt->data + len); + *buflen -= (2 + len); + } else { + elt = NULL; + } + + return elt; +} + +/* + * Traverse a string of 1-byte tag/1-byte length/variable-length value + * triples, returning a pointer to the substring whose first element + * matches tag. Stop parsing when we see an element whose ID is greater + * than the target key. + */ +bcm_tlv_t * +bcm_parse_ordered_tlvs(void *buf, int buflen, uint key) +{ + bcm_tlv_t *elt; + int totlen; + + elt = (bcm_tlv_t*)buf; + totlen = buflen; + + /* find tagged parameter */ + while (totlen >= 2) { + uint id = elt->id; + int len = elt->len; + + /* Punt if we start seeing IDs > than target key */ + if (id > key) + return(NULL); + + /* validate remaining totlen */ + if ((id == key) && (totlen >= (len + 2))) + return (elt); + + elt = (bcm_tlv_t*)((uint8*)elt + (len + 2)); + totlen -= (len + 2); + } + return NULL; +} + + +/* + * Traverse a string of 1-byte tag/1-byte length/variable-length value + * triples, returning a pointer to the substring whose first element + * matches tag + */ +bcm_tlv_t * +bcm_parse_tlvs(void *buf, int buflen, uint key) +{ + bcm_tlv_t *elt; + int totlen; + + elt = (bcm_tlv_t*)buf; + totlen = buflen; + + /* find tagged parameter */ + while (totlen >= 2) { + int len = elt->len; + + /* validate remaining totlen */ + if ((elt->id == key) && (totlen >= (len + 2))) + return (elt); + + elt = (bcm_tlv_t*)((uint8*)elt + (len + 2)); + totlen -= (len + 2); + } + + return NULL; +} + +void +pktq_init(struct pktq *q, uint maxlen, bool priority) +{ + q->head = q->tail = NULL; + q->priority = priority; + q->maxlen = maxlen; + q->len = 0; +} + +bool +pktenq(struct pktq *q, void *p, bool lifo) +{ + void *next, *prev; + + /* Queue is full */ + if (q->len >= q->maxlen) + return FALSE; + + /* Queueing chains not allowed */ + ASSERT(PKTLINK(p) == NULL); + + /* Queue is empty */ + if (q->tail == NULL) { + ASSERT(q->head == NULL); + q->head = q->tail = p; + } + + /* Insert at head or tail */ + else if (q->priority == FALSE) { + /* Insert at head (LIFO) */ + if (lifo) { + PKTSETLINK(p, q->head); + q->head = p; + } + /* Insert at tail (FIFO) */ + else { + ASSERT(PKTLINK(q->tail) == NULL); + PKTSETLINK(q->tail, p); + PKTSETLINK(p, NULL); + q->tail = p; + } + } + + /* Insert by priority */ + else { + ASSERT(q->head); + ASSERT(q->tail); + /* Shortcut to insertion at tail */ + if (PKTPRIO(p) < PKTPRIO(q->tail) || + (!lifo && PKTPRIO(p) <= PKTPRIO(q->tail))) { + prev = q->tail; + next = NULL; + } + /* Insert at head or in the middle */ + else { + prev = NULL; + next = q->head; + } + /* Walk the queue */ + for (; next; prev = next, next = PKTLINK(next)) { + /* Priority queue invariant */ + ASSERT(!prev || PKTPRIO(prev) >= PKTPRIO(next)); + /* Insert at head of string of packets of same priority (LIFO) */ + if (lifo) { + if (PKTPRIO(p) >= PKTPRIO(next)) + break; + } + /* Insert at tail of string of packets of same priority (FIFO) */ + else { + if (PKTPRIO(p) > PKTPRIO(next)) + break; + } + } + /* Insert at tail */ + if (next == NULL) { + ASSERT(PKTLINK(q->tail) == NULL); + PKTSETLINK(q->tail, p); + PKTSETLINK(p, NULL); + q->tail = p; + } + /* Insert in the middle */ + else if (prev) { + PKTSETLINK(prev, p); + PKTSETLINK(p, next); + } + /* Insert at head */ + else { + PKTSETLINK(p, q->head); + q->head = p; + } + } + + /* List invariants after insertion */ + ASSERT(q->head); + ASSERT(PKTLINK(q->tail) == NULL); + + q->len++; + return TRUE; +} + +void* +pktdeq(struct pktq *q) +{ + void *p; + + if ((p = q->head)) { + ASSERT(q->tail); + q->head = PKTLINK(p); + PKTSETLINK(p, NULL); + q->len--; + if (q->head == NULL) + q->tail = NULL; + } + else { + ASSERT(q->tail == NULL); + } + + return (p); +} + +/******************************************************************************* + * crc8 + * + * Computes a crc8 over the input data using the polynomial: + * + * x^8 + x^7 +x^6 + x^4 + x^2 + 1 + * + * The caller provides the initial value (either CRC8_INIT_VALUE + * or the previous returned value) to allow for processing of + * discontiguous blocks of data. When generating the CRC the + * caller is responsible for complementing the final return value + * and inserting it into the byte stream. When checking, a final + * return value of CRC8_GOOD_VALUE indicates a valid CRC. + * + * Reference: Dallas Semiconductor Application Note 27 + * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms", + * ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd., + * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt + * + ******************************************************************************/ + +static uint8 crc8_table[256] = { + 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B, + 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21, + 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF, + 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5, + 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14, + 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E, + 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80, + 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA, + 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95, + 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF, + 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01, + 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B, + 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA, + 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0, + 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E, + 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34, + 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0, + 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A, + 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54, + 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E, + 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF, + 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5, + 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B, + 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61, + 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E, + 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74, + 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA, + 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0, + 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41, + 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B, + 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5, + 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F +}; + +/* + * Search the name=value vars for a specific one and return its value. + * Returns NULL if not found. + */ +char* +getvar(char *vars, char *name) +{ + char *s; + int len; + + len = strlen(name); + + /* first look in vars[] */ + for (s = vars; s && *s; ) { + if ((bcmp(s, name, len) == 0) && (s[len] == '=')) + return (&s[len+1]); + + while (*s++) + ; + } + + /* then query nvram */ + return (nvram_get(name)); +} + +/* + * Search the vars for a specific one and return its value as + * an integer. Returns 0 if not found. + */ +int +getintvar(char *vars, char *name) +{ + char *val; + + if ((val = getvar(vars, name)) == NULL) + return (0); + + return (bcm_strtoul(val, NULL, 0)); +} + +/* return pointer to location of substring 'needle' in 'haystack' */ +char* +bcmstrstr(char *haystack, char *needle) +{ + int len, nlen; + int i; + + if ((haystack == NULL) || (needle == NULL)) + return (haystack); + + nlen = strlen(needle); + len = strlen(haystack) - nlen + 1; + + for (i = 0; i < len; i++) + if (bcmp(needle, &haystack[i], nlen) == 0) + return (&haystack[i]); + return (NULL); +} + +void +bcm_mdelay(uint ms) +{ + uint i; + + for (i = 0; i < ms; i++) { + OSL_DELAY(1000); + } +} + +#define CRC_INNER_LOOP(n, c, x) \ + (c) = ((c) >> 8) ^ crc##n##_table[((c) ^ (x)) & 0xff] + +uint8 +crc8( + uint8 *pdata, /* pointer to array of data to process */ + uint nbytes, /* number of input data bytes to process */ + uint8 crc /* either CRC8_INIT_VALUE or previous return value */ +) +{ + /* hard code the crc loop instead of using CRC_INNER_LOOP macro + * to avoid the undefined and unnecessary (uint8 >> 8) operation. */ + while (nbytes-- > 0) + crc = crc8_table[(crc ^ *pdata++) & 0xff]; + + return crc; +} + +/******************************************************************************* + * crc16 + * + * Computes a crc16 over the input data using the polynomial: + * + * x^16 + x^12 +x^5 + 1 + * + * The caller provides the initial value (either CRC16_INIT_VALUE + * or the previous returned value) to allow for processing of + * discontiguous blocks of data. When generating the CRC the + * caller is responsible for complementing the final return value + * and inserting it into the byte stream. When checking, a final + * return value of CRC16_GOOD_VALUE indicates a valid CRC. + * + * Reference: Dallas Semiconductor Application Note 27 + * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms", + * ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd., + * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt + * + ******************************************************************************/ + +static uint16 crc16_table[256] = { + 0x0000, 0x1189, 0x2312, 0x329B, 0x4624, 0x57AD, 0x6536, 0x74BF, + 0x8C48, 0x9DC1, 0xAF5A, 0xBED3, 0xCA6C, 0xDBE5, 0xE97E, 0xF8F7, + 0x1081, 0x0108, 0x3393, 0x221A, 0x56A5, 0x472C, 0x75B7, 0x643E, + 0x9CC9, 0x8D40, 0xBFDB, 0xAE52, 0xDAED, 0xCB64, 0xF9FF, 0xE876, + 0x2102, 0x308B, 0x0210, 0x1399, 0x6726, 0x76AF, 0x4434, 0x55BD, + 0xAD4A, 0xBCC3, 0x8E58, 0x9FD1, 0xEB6E, 0xFAE7, 0xC87C, 0xD9F5, + 0x3183, 0x200A, 0x1291, 0x0318, 0x77A7, 0x662E, 0x54B5, 0x453C, + 0xBDCB, 0xAC42, 0x9ED9, 0x8F50, 0xFBEF, 0xEA66, 0xD8FD, 0xC974, + 0x4204, 0x538D, 0x6116, 0x709F, 0x0420, 0x15A9, 0x2732, 0x36BB, + 0xCE4C, 0xDFC5, 0xED5E, 0xFCD7, 0x8868, 0x99E1, 0xAB7A, 0xBAF3, + 0x5285, 0x430C, 0x7197, 0x601E, 0x14A1, 0x0528, 0x37B3, 0x263A, + 0xDECD, 0xCF44, 0xFDDF, 0xEC56, 0x98E9, 0x8960, 0xBBFB, 0xAA72, + 0x6306, 0x728F, 0x4014, 0x519D, 0x2522, 0x34AB, 0x0630, 0x17B9, + 0xEF4E, 0xFEC7, 0xCC5C, 0xDDD5, 0xA96A, 0xB8E3, 0x8A78, 0x9BF1, + 0x7387, 0x620E, 0x5095, 0x411C, 0x35A3, 0x242A, 0x16B1, 0x0738, + 0xFFCF, 0xEE46, 0xDCDD, 0xCD54, 0xB9EB, 0xA862, 0x9AF9, 0x8B70, + 0x8408, 0x9581, 0xA71A, 0xB693, 0xC22C, 0xD3A5, 0xE13E, 0xF0B7, + 0x0840, 0x19C9, 0x2B52, 0x3ADB, 0x4E64, 0x5FED, 0x6D76, 0x7CFF, + 0x9489, 0x8500, 0xB79B, 0xA612, 0xD2AD, 0xC324, 0xF1BF, 0xE036, + 0x18C1, 0x0948, 0x3BD3, 0x2A5A, 0x5EE5, 0x4F6C, 0x7DF7, 0x6C7E, + 0xA50A, 0xB483, 0x8618, 0x9791, 0xE32E, 0xF2A7, 0xC03C, 0xD1B5, + 0x2942, 0x38CB, 0x0A50, 0x1BD9, 0x6F66, 0x7EEF, 0x4C74, 0x5DFD, + 0xB58B, 0xA402, 0x9699, 0x8710, 0xF3AF, 0xE226, 0xD0BD, 0xC134, + 0x39C3, 0x284A, 0x1AD1, 0x0B58, 0x7FE7, 0x6E6E, 0x5CF5, 0x4D7C, + 0xC60C, 0xD785, 0xE51E, 0xF497, 0x8028, 0x91A1, 0xA33A, 0xB2B3, + 0x4A44, 0x5BCD, 0x6956, 0x78DF, 0x0C60, 0x1DE9, 0x2F72, 0x3EFB, + 0xD68D, 0xC704, 0xF59F, 0xE416, 0x90A9, 0x8120, 0xB3BB, 0xA232, + 0x5AC5, 0x4B4C, 0x79D7, 0x685E, 0x1CE1, 0x0D68, 0x3FF3, 0x2E7A, + 0xE70E, 0xF687, 0xC41C, 0xD595, 0xA12A, 0xB0A3, 0x8238, 0x93B1, + 0x6B46, 0x7ACF, 0x4854, 0x59DD, 0x2D62, 0x3CEB, 0x0E70, 0x1FF9, + 0xF78F, 0xE606, 0xD49D, 0xC514, 0xB1AB, 0xA022, 0x92B9, 0x8330, + 0x7BC7, 0x6A4E, 0x58D5, 0x495C, 0x3DE3, 0x2C6A, 0x1EF1, 0x0F78 +}; + +uint16 +crc16( + uint8 *pdata, /* pointer to array of data to process */ + uint nbytes, /* number of input data bytes to process */ + uint16 crc /* either CRC16_INIT_VALUE or previous return value */ +) +{ + while (nbytes-- > 0) + CRC_INNER_LOOP(16, crc, *pdata++); + return crc; +} + +static uint32 crc32_table[256] = { + 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA, + 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3, + 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988, + 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91, + 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE, + 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7, + 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC, + 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5, + 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172, + 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B, + 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940, + 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59, + 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, + 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F, + 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924, + 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D, + 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A, + 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433, + 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, + 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01, + 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E, + 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457, + 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C, + 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65, + 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, + 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB, + 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0, + 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9, + 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086, + 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F, + 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, + 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD, + 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A, + 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683, + 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8, + 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1, + 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, + 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7, + 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC, + 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5, + 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252, + 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B, + 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, + 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79, + 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236, + 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F, + 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04, + 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D, + 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, + 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713, + 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38, + 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21, + 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E, + 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777, + 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, + 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45, + 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2, + 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB, + 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0, + 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9, + 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, + 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF, + 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94, + 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D +}; + +uint32 +crc32( + uint8 *pdata, /* pointer to array of data to process */ + uint nbytes, /* number of input data bytes to process */ + uint32 crc /* either CRC32_INIT_VALUE or previous return value */ +) +{ + uint8 *pend; +#ifdef __mips__ + uint8 tmp[4]; + ulong *tptr = (ulong *)tmp; + + /* in case the beginning of the buffer isn't aligned */ + pend = (uint8 *)((uint)(pdata + 3) & 0xfffffffc); + nbytes -= (pend - pdata); + while (pdata < pend) + CRC_INNER_LOOP(32, crc, *pdata++); + + /* handle bulk of data as 32-bit words */ + pend = pdata + (nbytes & 0xfffffffc); + while (pdata < pend) { + *tptr = *((ulong *)pdata)++; + CRC_INNER_LOOP(32, crc, tmp[0]); + CRC_INNER_LOOP(32, crc, tmp[1]); + CRC_INNER_LOOP(32, crc, tmp[2]); + CRC_INNER_LOOP(32, crc, tmp[3]); + } + + /* 1-3 bytes at end of buffer */ + pend = pdata + (nbytes & 0x03); + while (pdata < pend) + CRC_INNER_LOOP(32, crc, *pdata++); +#else + pend = pdata + nbytes; + while (pdata < pend) + CRC_INNER_LOOP(32, crc, *pdata++); +#endif + + return crc; +} + +#ifdef notdef +#define CLEN 1499 +#define CBUFSIZ (CLEN+4) +#define CNBUFS 5 + +void testcrc32(void) +{ + uint j,k,l; + uint8 *buf; + uint len[CNBUFS]; + uint32 crcr; + uint32 crc32tv[CNBUFS] = + {0xd2cb1faa, 0xd385c8fa, 0xf5b4f3f3, 0x55789e20, 0x00343110}; + + ASSERT((buf = MALLOC(CBUFSIZ*CNBUFS)) != NULL); + + /* step through all possible alignments */ + for (l=0;l<=4;l++) { + for (j=0; j<CNBUFS; j++) { + len[j] = CLEN; + for (k=0; k<len[j]; k++) + *(buf + j*CBUFSIZ + (k+l)) = (j+k) & 0xff; + } + + for (j=0; j<CNBUFS; j++) { + crcr = crc32(buf + j*CBUFSIZ + l, len[j], CRC32_INIT_VALUE); + ASSERT(crcr == crc32tv[j]); + } + } + + MFREE(buf, CBUFSIZ*CNBUFS); + return; +} +#endif + + diff --git a/package/linux/kernel-source/drivers/net/hnd/hnddma.c b/package/linux/kernel-source/drivers/net/hnd/hnddma.c new file mode 100644 index 000000000..ab87e4e2d --- /dev/null +++ b/package/linux/kernel-source/drivers/net/hnd/hnddma.c @@ -0,0 +1,841 @@ +/* + * Generic Broadcom Home Networking Division (HND) DMA module. + * This supports the following chips: BCM42xx, 44xx, 47xx . + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#include <typedefs.h> +#include <osl.h> +#include <bcmendian.h> +#include <bcmutils.h> + +struct dma_info; /* forward declaration */ +#define di_t struct dma_info +#include <hnddma.h> + +/* debug/trace */ +#define DMA_ERROR(args) +#define DMA_TRACE(args) + +/* default dma message level(if input msg_level pointer is null in dma_attach()) */ +static uint dma_msg_level = 0; + +#define MAXNAMEL 8 +#define MAXDD (DMAMAXRINGSZ / sizeof (dmadd_t)) + +/* dma engine software state */ +typedef struct dma_info { + hnddma_t hnddma; /* exported structure */ + uint *msg_level; /* message level pointer */ + + char name[MAXNAMEL]; /* callers name for diag msgs */ + void *drv; /* driver handle */ + void *dev; /* device handle */ + dmaregs_t *regs; /* dma engine registers */ + + dmadd_t *txd; /* pointer to chip-specific tx descriptor ring */ + uint txin; /* index of next descriptor to reclaim */ + uint txout; /* index of next descriptor to post */ + uint txavail; /* # free tx descriptors */ + void *txp[MAXDD]; /* parallel array of pointers to packets */ + ulong txdpa; /* physical address of descriptor ring */ + uint txdalign; /* #bytes added to alloc'd mem to align txd */ + + dmadd_t *rxd; /* pointer to chip-specific rx descriptor ring */ + uint rxin; /* index of next descriptor to reclaim */ + uint rxout; /* index of next descriptor to post */ + void *rxp[MAXDD]; /* parallel array of pointers to packets */ + ulong rxdpa; /* physical address of descriptor ring */ + uint rxdalign; /* #bytes added to alloc'd mem to align rxd */ + + /* tunables */ + uint ntxd; /* # tx descriptors */ + uint nrxd; /* # rx descriptors */ + uint rxbufsize; /* rx buffer size in bytes */ + uint nrxpost; /* # rx buffers to keep posted */ + uint rxoffset; /* rxcontrol offset */ + uint ddoffset; /* add to get dma address of descriptor ring */ + uint dataoffset; /* add to get dma address of data buffer */ +} dma_info_t; + +/* descriptor bumping macros */ +#define TXD(x) ((x) & (di->ntxd - 1)) +#define RXD(x) ((x) & (di->nrxd - 1)) +#define NEXTTXD(i) TXD(i + 1) +#define PREVTXD(i) TXD(i - 1) +#define NEXTRXD(i) RXD(i + 1) +#define NTXDACTIVE(h, t) TXD(t - h) +#define NRXDACTIVE(h, t) RXD(t - h) + +/* macros to convert between byte offsets and indexes */ +#define B2I(bytes) ((bytes) / sizeof (dmadd_t)) +#define I2B(index) ((index) * sizeof (dmadd_t)) + +void* +dma_attach(void *drv, void *dev, char *name, dmaregs_t *regs, uint ntxd, uint nrxd, + uint rxbufsize, uint nrxpost, uint rxoffset, uint ddoffset, uint dataoffset, uint *msg_level) +{ + dma_info_t *di; + void *va; + + ASSERT(ntxd <= MAXDD); + ASSERT(nrxd <= MAXDD); + + /* allocate private info structure */ + if ((di = MALLOC(sizeof (dma_info_t))) == NULL) + return (NULL); + bzero((char*)di, sizeof (dma_info_t)); + + /* set message level */ + di->msg_level = msg_level ? msg_level : &dma_msg_level; + + DMA_TRACE(("%s: dma_attach: drv 0x%x dev 0x%x regs 0x%x ntxd %d nrxd %d rxbufsize %d nrxpost %d rxoffset %d ddoffset 0x%x dataoffset 0x%x\n", name, (uint)drv, (uint)dev, (uint)regs, ntxd, nrxd, rxbufsize, nrxpost, rxoffset, ddoffset, dataoffset)); + + /* make a private copy of our callers name */ + strncpy(di->name, name, MAXNAMEL); + di->name[MAXNAMEL-1] = '\0'; + + di->drv = drv; + di->dev = dev; + di->regs = regs; + + /* allocate transmit descriptor ring */ + if (ntxd) { + if ((va = DMA_ALLOC_CONSISTENT(dev, (DMAMAXRINGSZ + DMARINGALIGN), &di->txdpa)) == NULL) + goto fail; + di->txd = (dmadd_t*) ROUNDUP(va, DMARINGALIGN); + di->txdalign = ((uint)di->txd - (uint)va); + di->txdpa = di->txdpa + di->txdalign; + ASSERT(ISALIGNED(di->txd, DMARINGALIGN)); + } + + /* allocate receive descriptor ring */ + if (nrxd) { + if ((va = DMA_ALLOC_CONSISTENT(dev, (DMAMAXRINGSZ + DMARINGALIGN), &di->rxdpa)) == NULL) + goto fail; + di->rxd = (dmadd_t*) ROUNDUP(va, DMARINGALIGN); + di->rxdalign = ((uint)di->rxd - (uint)va); + di->rxdpa = di->rxdpa + di->rxdalign; + ASSERT(ISALIGNED(di->rxd, DMARINGALIGN)); + } + + /* save tunables */ + di->ntxd = ntxd; + di->nrxd = nrxd; + di->rxbufsize = rxbufsize; + di->nrxpost = nrxpost; + di->rxoffset = rxoffset; + di->ddoffset = ddoffset; + di->dataoffset = dataoffset; + + return ((void*)di); + +fail: + dma_detach((void*)di); + return (NULL); +} + +/* may be called with core in reset */ +void +dma_detach(dma_info_t *di) +{ + if (di == NULL) + return; + + DMA_TRACE(("%s: dma_detach\n", di->name)); + + /* shouldn't be here if descriptors are unreclaimed */ + ASSERT(di->txin == di->txout); + ASSERT(di->rxin == di->rxout); + + /* free dma descriptor rings */ + if (di->txd) + DMA_FREE_CONSISTENT(di->dev, (void *)((uint)di->txd - di->txdalign), (DMAMAXRINGSZ + DMARINGALIGN), di->txdpa); + if (di->rxd) + DMA_FREE_CONSISTENT(di->dev, (void *)((uint)di->rxd - di->rxdalign), (DMAMAXRINGSZ + DMARINGALIGN), di->rxdpa); + + /* free our private info structure */ + MFREE((void*)di, sizeof (dma_info_t)); +} + + +void +dma_txreset(dma_info_t *di) +{ + uint32 status; + + DMA_TRACE(("%s: dma_txreset\n", di->name)); + + /* suspend tx DMA first */ + W_REG(&di->regs->xmtcontrol, XC_SE); + SPINWAIT((status = (R_REG(&di->regs->xmtstatus) & XS_XS_MASK)) != XS_XS_DISABLED && + status != XS_XS_IDLE && + status != XS_XS_STOPPED, + 10000); + + W_REG(&di->regs->xmtcontrol, 0); + SPINWAIT((status = (R_REG(&di->regs->xmtstatus) & XS_XS_MASK)) != XS_XS_DISABLED, + 10000); + + if (status != XS_XS_DISABLED) { + DMA_ERROR(("%s: dma_txreset: dma cannot be stopped\n", di->name)); + } + + /* wait for the last transaction to complete */ + OSL_DELAY(300); +} + +void +dma_rxreset(dma_info_t *di) +{ + uint32 status; + + DMA_TRACE(("%s: dma_rxreset\n", di->name)); + + W_REG(&di->regs->rcvcontrol, 0); + SPINWAIT((status = (R_REG(&di->regs->rcvstatus) & RS_RS_MASK)) != RS_RS_DISABLED, + 10000); + + if (status != RS_RS_DISABLED) { + DMA_ERROR(("%s: dma_rxreset: dma cannot be stopped\n", di->name)); + } +} + +void +dma_txinit(dma_info_t *di) +{ + DMA_TRACE(("%s: dma_txinit\n", di->name)); + + di->txin = di->txout = 0; + di->txavail = di->ntxd - 1; + + /* clear tx descriptor ring */ + BZERO_SM((void*)di->txd, (di->ntxd * sizeof (dmadd_t))); + + W_REG(&di->regs->xmtcontrol, XC_XE); + W_REG(&di->regs->xmtaddr, (di->txdpa + di->ddoffset)); +} + +bool +dma_txenabled(dma_info_t *di) +{ + uint32 xc; + + /* If the chip is dead, it is not enabled :-) */ + xc = R_REG(&di->regs->xmtcontrol); + return ((xc != 0xffffffff) && (xc & XC_XE)); +} + +void +dma_txsuspend(dma_info_t *di) +{ + DMA_TRACE(("%s: dma_txsuspend\n", di->name)); + OR_REG(&di->regs->xmtcontrol, XC_SE); +} + +void +dma_txresume(dma_info_t *di) +{ + DMA_TRACE(("%s: dma_txresume\n", di->name)); + AND_REG(&di->regs->xmtcontrol, ~XC_SE); +} + +bool +dma_txsuspended(dma_info_t *di) +{ + if (!(R_REG(&di->regs->xmtcontrol) & XC_SE)) + return 0; + + if ((R_REG(&di->regs->xmtstatus) & XS_XS_MASK) != XS_XS_IDLE) + return 0; + + OSL_DELAY(2); + return ((R_REG(&di->regs->xmtstatus) & XS_XS_MASK) == XS_XS_IDLE); +} + +bool +dma_txstopped(dma_info_t *di) +{ + return ((R_REG(&di->regs->xmtstatus) & XS_XS_MASK) == XS_XS_STOPPED); +} + +bool +dma_rxstopped(dma_info_t *di) +{ + return ((R_REG(&di->regs->rcvstatus) & RS_RS_MASK) == RS_RS_STOPPED); +} + +void +dma_fifoloopbackenable(dma_info_t *di) +{ + DMA_TRACE(("%s: dma_fifoloopbackenable\n", di->name)); + OR_REG(&di->regs->xmtcontrol, XC_LE); +} + +void +dma_rxinit(dma_info_t *di) +{ + DMA_TRACE(("%s: dma_rxinit\n", di->name)); + + di->rxin = di->rxout = 0; + + /* clear rx descriptor ring */ + BZERO_SM((void*)di->rxd, (di->nrxd * sizeof (dmadd_t))); + + dma_rxenable(di); + W_REG(&di->regs->rcvaddr, (di->rxdpa + di->ddoffset)); +} + +void +dma_rxenable(dma_info_t *di) +{ + DMA_TRACE(("%s: dma_rxenable\n", di->name)); + W_REG(&di->regs->rcvcontrol, ((di->rxoffset << RC_RO_SHIFT) | RC_RE)); +} + +bool +dma_rxenabled(dma_info_t *di) +{ + uint32 rc; + + rc = R_REG(&di->regs->rcvcontrol); + return ((rc != 0xffffffff) && (rc & RC_RE)); +} + +/* + * The BCM47XX family supports full 32bit dma engine buffer addressing so + * dma buffers can cross 4 Kbyte page boundaries. + */ +int +dma_txfast(dma_info_t *di, void *p0, uint32 coreflags) +{ + void *p, *next; + uchar *data; + uint len; + uint txout; + uint32 ctrl; + uint32 pa; + + DMA_TRACE(("%s: dma_txfast\n", di->name)); + + txout = di->txout; + ctrl = 0; + + /* + * Walk the chain of packet buffers + * allocating and initializing transmit descriptor entries. + */ + for (p = p0; p; p = next) { + data = PKTDATA(di->drv, p); + len = PKTLEN(di->drv, p); + next = PKTNEXT(di->drv, p); + + /* return nonzero if out of tx descriptors */ + if (NEXTTXD(txout) == di->txin) + goto outoftxd; + + if (len == 0) + continue; + + /* get physical address of buffer start */ + pa = (uint32) DMA_MAP(di->dev, data, len, DMA_TX, p); + + /* build the descriptor control value */ + ctrl = len & CTRL_BC_MASK; + + ctrl |= coreflags; + + if (p == p0) + ctrl |= CTRL_SOF; + if (next == NULL) + ctrl |= (CTRL_IOC | CTRL_EOF); + if (txout == (di->ntxd - 1)) + ctrl |= CTRL_EOT; + + /* init the tx descriptor */ + W_SM(&di->txd[txout].ctrl, BUS_SWAP32(ctrl)); + W_SM(&di->txd[txout].addr, BUS_SWAP32(pa + di->dataoffset)); + + ASSERT(di->txp[txout] == NULL); + + txout = NEXTTXD(txout); + } + + /* if last txd eof not set, fix it */ + if (!(ctrl & CTRL_EOF)) + W_SM(&di->txd[PREVTXD(txout)].ctrl, BUS_SWAP32(ctrl | CTRL_IOC | CTRL_EOF)); + + /* save the packet */ + di->txp[PREVTXD(txout)] = p0; + + /* bump the tx descriptor index */ + di->txout = txout; + + /* kick the chip */ + W_REG(&di->regs->xmtptr, I2B(txout)); + + /* tx flow control */ + di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1; + + return (0); + +outoftxd: + DMA_ERROR(("%s: dma_txfast: out of txds\n", di->name)); + PKTFREE(di->drv, p0, TRUE); + di->txavail = 0; + di->hnddma.txnobuf++; + return (-1); +} + +#define PAGESZ 4096 +#define PAGEBASE(x) ((uint)(x) & ~4095) + +/* + * Just like above except go through the extra effort of splitting + * buffers that cross 4Kbyte boundaries into multiple tx descriptors. + */ +int +dma_tx(dma_info_t *di, void *p0, uint32 coreflags) +{ + void *p, *next; + uchar *data; + uint plen, len; + uchar *page, *start, *end; + uint txout; + uint32 ctrl; + uint32 pa; + + DMA_TRACE(("%s: dma_tx\n", di->name)); + + txout = di->txout; + ctrl = 0; + + /* + * Walk the chain of packet buffers + * splitting those that cross 4 Kbyte boundaries + * allocating and initializing transmit descriptor entries. + */ + for (p = p0; p; p = next) { + data = PKTDATA(di->drv, p); + plen = PKTLEN(di->drv, p); + next = PKTNEXT(di->drv, p); + + if (plen == 0) + continue; + + for (page = (uchar*)PAGEBASE(data); + page <= (uchar*)PAGEBASE(data + plen - 1); + page += PAGESZ) { + + /* return nonzero if out of tx descriptors */ + if (NEXTTXD(txout) == di->txin) + goto outoftxd; + + start = (page == (uchar*)PAGEBASE(data))? data: page; + end = (page == (uchar*)PAGEBASE(data + plen))? + (data + plen): (page + PAGESZ); + len = end - start; + + /* build the descriptor control value */ + ctrl = len & CTRL_BC_MASK; + + ctrl |= coreflags; + + if ((p == p0) && (start == data)) + ctrl |= CTRL_SOF; + if ((next == NULL) && (end == (data + plen))) + ctrl |= (CTRL_IOC | CTRL_EOF); + if (txout == (di->ntxd - 1)) + ctrl |= CTRL_EOT; + + /* get physical address of buffer start */ + pa = (uint32) DMA_MAP(di->dev, start, len, DMA_TX, p); + + /* init the tx descriptor */ + W_SM(&di->txd[txout].ctrl, BUS_SWAP32(ctrl)); + W_SM(&di->txd[txout].addr, BUS_SWAP32(pa + di->dataoffset)); + + ASSERT(di->txp[txout] == NULL); + + txout = NEXTTXD(txout); + } + } + + /* if last txd eof not set, fix it */ + if (!(ctrl & CTRL_EOF)) + W_SM(&di->txd[PREVTXD(txout)].ctrl, BUS_SWAP32(ctrl | CTRL_IOC | CTRL_EOF)); + + /* save the packet */ + di->txp[PREVTXD(txout)] = p0; + + /* bump the tx descriptor index */ + di->txout = txout; + + /* kick the chip */ + W_REG(&di->regs->xmtptr, I2B(txout)); + + /* tx flow control */ + di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1; + + return (0); + +outoftxd: + DMA_ERROR(("%s: dma_tx: out of txds\n", di->name)); + PKTFREE(di->drv, p0, TRUE); + di->txavail = 0; + di->hnddma.txnobuf++; + return (-1); +} + +/* returns a pointer to the next frame received, or NULL if there are no more */ +void* +dma_rx(dma_info_t *di) +{ + void *p; + uint len; + int skiplen = 0; + + while ((p = dma_getnextrxp(di, FALSE))) { + /* skip giant packets which span multiple rx descriptors */ + if (skiplen > 0) { + skiplen -= di->rxbufsize; + if (skiplen < 0) + skiplen = 0; + PKTFREE(di->drv, p, FALSE); + continue; + } + + len = ltoh16(*(uint16*)(PKTDATA(di->drv, p))); + DMA_TRACE(("%s: dma_rx len %d\n", di->name, len)); + + /* bad frame length check */ + if (len > (di->rxbufsize - di->rxoffset)) { + DMA_ERROR(("%s: dma_rx: bad frame length (%d)\n", di->name, len)); + if (len > 0) + skiplen = len - (di->rxbufsize - di->rxoffset); + PKTFREE(di->drv, p, FALSE); + di->hnddma.rxgiants++; + continue; + } + + /* set actual length */ + PKTSETLEN(di->drv, p, (di->rxoffset + len)); + + break; + } + + return (p); +} + +/* post receive buffers */ +void +dma_rxfill(dma_info_t *di) +{ + void *p; + uint rxin, rxout; + uint ctrl; + uint n; + uint i; + uint32 pa; + uint rxbufsize; + + /* + * Determine how many receive buffers we're lacking + * from the full complement, allocate, initialize, + * and post them, then update the chip rx lastdscr. + */ + + rxin = di->rxin; + rxout = di->rxout; + rxbufsize = di->rxbufsize; + + n = di->nrxpost - NRXDACTIVE(rxin, rxout); + + DMA_TRACE(("%s: dma_rxfill: post %d\n", di->name, n)); + + for (i = 0; i < n; i++) { + if ((p = PKTGET(di->drv, rxbufsize, FALSE)) == NULL) { + DMA_ERROR(("%s: dma_rxfill: out of rxbufs\n", di->name)); + di->hnddma.rxnobuf++; + break; + } + + *(uint32*)(OSL_UNCACHED(PKTDATA(di->drv, p))) = 0; + + pa = (uint32) DMA_MAP(di->dev, PKTDATA(di->drv, p), rxbufsize, DMA_RX, p); + ASSERT(ISALIGNED(pa, 4)); + + /* save the free packet pointer */ + ASSERT(di->rxp[rxout] == NULL); + di->rxp[rxout] = p; + + /* prep the descriptor control value */ + ctrl = rxbufsize; + if (rxout == (di->nrxd - 1)) + ctrl |= CTRL_EOT; + + /* init the rx descriptor */ + W_SM(&di->rxd[rxout].ctrl, BUS_SWAP32(ctrl)); + W_SM(&di->rxd[rxout].addr, BUS_SWAP32(pa + di->dataoffset)); + + rxout = NEXTRXD(rxout); + } + + di->rxout = rxout; + + /* update the chip lastdscr pointer */ + W_REG(&di->regs->rcvptr, I2B(rxout)); +} + +void +dma_txreclaim(dma_info_t *di, bool forceall) +{ + void *p; + + DMA_TRACE(("%s: dma_txreclaim %s\n", di->name, forceall ? "all" : "")); + + while ((p = dma_getnexttxp(di, forceall))) + PKTFREE(di->drv, p, TRUE); +} + +/* + * Reclaim next completed txd (txds if using chained buffers) and + * return associated packet. + * If 'force' is true, reclaim txd(s) and return associated packet + * regardless of the value of the hardware "curr" pointer. + */ +void* +dma_getnexttxp(dma_info_t *di, bool forceall) +{ + uint start, end, i; + void *txp; + + DMA_TRACE(("%s: dma_getnexttxp %s\n", di->name, forceall ? "all" : "")); + + txp = NULL; + + start = di->txin; + if (forceall) + end = di->txout; + else + end = B2I(R_REG(&di->regs->xmtstatus) & XS_CD_MASK); + + if ((start == 0) && (end > di->txout)) + goto bogus; + + for (i = start; i != end && !txp; i = NEXTTXD(i)) { + DMA_UNMAP(di->dev, (BUS_SWAP32(R_SM(&di->txd[i].addr)) - di->dataoffset), + (BUS_SWAP32(R_SM(&di->txd[i].ctrl)) & CTRL_BC_MASK), DMA_TX, di->txp[i]); + W_SM(&di->txd[i].addr, 0xdeadbeef); + txp = di->txp[i]; + di->txp[i] = NULL; + } + + di->txin = i; + + /* tx flow control */ + di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1; + + return (txp); + +bogus: +/* + DMA_ERROR(("dma_getnexttxp: bogus curr: start %d end %d txout %d force %d\n", + start, end, di->txout, forceall)); +*/ + return (NULL); +} + +/* like getnexttxp but no reclaim */ +void* +dma_peeknexttxp(dma_info_t *di) +{ + uint end, i; + + end = B2I(R_REG(&di->regs->xmtstatus) & XS_CD_MASK); + + for (i = di->txin; i != end; i = NEXTTXD(i)) + if (di->txp[i]) + return (di->txp[i]); + + return (NULL); +} + +void +dma_rxreclaim(dma_info_t *di) +{ + void *p; + + DMA_TRACE(("%s: dma_rxreclaim\n", di->name)); + + while ((p = dma_getnextrxp(di, TRUE))) + PKTFREE(di->drv, p, FALSE); +} + +void * +dma_getnextrxp(dma_info_t *di, bool forceall) +{ + uint i; + void *rxp; + + /* if forcing, dma engine must be disabled */ + ASSERT(!forceall || !dma_rxenabled(di)); + + i = di->rxin; + + /* return if no packets posted */ + if (i == di->rxout) + return (NULL); + + /* ignore curr if forceall */ + if (!forceall && (i == B2I(R_REG(&di->regs->rcvstatus) & RS_CD_MASK))) + return (NULL); + + /* get the packet pointer that corresponds to the rx descriptor */ + rxp = di->rxp[i]; + ASSERT(rxp); + di->rxp[i] = NULL; + + /* clear this packet from the descriptor ring */ + DMA_UNMAP(di->dev, (BUS_SWAP32(R_SM(&di->rxd[i].addr)) - di->dataoffset), + di->rxbufsize, DMA_RX, rxp); + W_SM(&di->rxd[i].addr, 0xdeadbeef); + + di->rxin = NEXTRXD(i); + + return (rxp); +} + +char* +dma_dumptx(dma_info_t *di, char *buf) +{ + buf += sprintf(buf, "txd 0x%lx txdpa 0x%lx txp 0x%lx txin %d txout %d txavail %d\n", + (ulong)di->txd, di->txdpa, (ulong)di->txp, di->txin, di->txout, di->txavail); + buf += sprintf(buf, "xmtcontrol 0x%x xmtaddr 0x%x xmtptr 0x%x xmtstatus 0x%x\n", + R_REG(&di->regs->xmtcontrol), + R_REG(&di->regs->xmtaddr), + R_REG(&di->regs->xmtptr), + R_REG(&di->regs->xmtstatus)); + return (buf); +} + +char* +dma_dumprx(dma_info_t *di, char *buf) +{ + buf += sprintf(buf, "rxd 0x%lx rxdpa 0x%lx rxp 0x%lx rxin %d rxout %d\n", + (ulong)di->rxd, di->rxdpa, (ulong)di->rxp, di->rxin, di->rxout); + buf += sprintf(buf, "rcvcontrol 0x%x rcvaddr 0x%x rcvptr 0x%x rcvstatus 0x%x\n", + R_REG(&di->regs->rcvcontrol), + R_REG(&di->regs->rcvaddr), + R_REG(&di->regs->rcvptr), + R_REG(&di->regs->rcvstatus)); + return (buf); +} + +char* +dma_dump(dma_info_t *di, char *buf) +{ + buf = dma_dumptx(di, buf); + buf = dma_dumprx(di, buf); + return (buf); +} + +uint +dma_getvar(dma_info_t *di, char *name) +{ + if (!strcmp(name, "&txavail")) + return ((uint) &di->txavail); + else { + ASSERT(0); + } + return (0); +} + +void +dma_txblock(dma_info_t *di) +{ + di->txavail = 0; +} + +void +dma_txunblock(dma_info_t *di) +{ + di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1; +} + +uint +dma_txactive(dma_info_t *di) +{ + return (NTXDACTIVE(di->txin, di->txout)); +} + +/* + * Rotate all active tx dma ring entries "forward" by (ActiveDescriptor - txin). + */ +void +dma_txrotate(di_t *di) +{ + uint ad; + uint nactive; + uint rot; + uint old, new; + uint32 w; + uint first, last; + + ASSERT(dma_txsuspended(di)); + + nactive = dma_txactive(di); + ad = B2I((R_REG(&di->regs->xmtstatus) & XS_AD_MASK) >> XS_AD_SHIFT); + rot = TXD(ad - di->txin); + + ASSERT(rot < di->ntxd); + + /* full-ring case is a lot harder - don't worry about this */ + if (rot >= (di->ntxd - nactive)) { + DMA_ERROR(("%s: dma_txrotate: ring full - punt\n", di->name)); + return; + } + + first = di->txin; + last = PREVTXD(di->txout); + + /* move entries starting at last and moving backwards to first */ + for (old = last; old != PREVTXD(first); old = PREVTXD(old)) { + new = TXD(old + rot); + + /* + * Move the tx dma descriptor. + * EOT is set only in the last entry in the ring. + */ + w = R_SM(&di->txd[old].ctrl) & ~CTRL_EOT; + if (new == (di->ntxd - 1)) + w |= CTRL_EOT; + W_SM(&di->txd[new].ctrl, w); + W_SM(&di->txd[new].addr, R_SM(&di->txd[old].addr)); + + /* zap the old tx dma descriptor address field */ + W_SM(&di->txd[old].addr, 0xdeadbeef); + + /* move the corresponding txp[] entry */ + ASSERT(di->txp[new] == NULL); + di->txp[new] = di->txp[old]; + di->txp[old] = NULL; + } + + /* update txin and txout */ + di->txin = ad; + di->txout = TXD(di->txout + rot); + di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1; + + /* kick the chip */ + W_REG(&di->regs->xmtptr, I2B(di->txout)); +} diff --git a/package/linux/kernel-source/drivers/net/hnd/linux_osl.c b/package/linux/kernel-source/drivers/net/hnd/linux_osl.c new file mode 100644 index 000000000..575b046fb --- /dev/null +++ b/package/linux/kernel-source/drivers/net/hnd/linux_osl.c @@ -0,0 +1,465 @@ +/* + * Linux OS Independent Layer + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#define LINUX_OSL + +#include <typedefs.h> +#include <bcmendian.h> +#include <linuxver.h> +#include <linux_osl.h> +#include <bcmutils.h> +#include <linux/delay.h> +#ifdef mips +#include <asm/paccess.h> +#endif +#include <pcicfg.h> + +#define PCI_CFG_RETRY 10 + +void* +osl_pktget(void *drv, uint len, bool send) +{ + struct sk_buff *skb; + + if ((skb = dev_alloc_skb(len)) == NULL) + return (NULL); + + skb_put(skb, len); + + /* ensure the cookie field is cleared */ + PKTSETCOOKIE(skb, NULL); + + return ((void*) skb); +} + +void +osl_pktfree(void *p) +{ + struct sk_buff *skb, *nskb; + + skb = (struct sk_buff*) p; + + /* perversion: we use skb->next to chain multi-skb packets */ + while (skb) { + nskb = skb->next; + skb->next = NULL; + if (skb->destructor) { + /* cannot kfree_skb() on hard IRQ (net/core/skbuff.c) if destructor exists */ + dev_kfree_skb_any(skb); + } else { + /* can free immediately (even in_irq()) if destructor does not exist */ + dev_kfree_skb(skb); + } + skb = nskb; + } +} + +uint32 +osl_pci_read_config(void *loc, uint offset, uint size) +{ + struct pci_dev *pdev; + uint val; + uint retry=PCI_CFG_RETRY; + + /* only 4byte access supported */ + ASSERT(size == 4); + + pdev = (struct pci_dev*)loc; + do { + pci_read_config_dword(pdev, offset, &val); + if (val != 0xffffffff) + break; + } while (retry--); + + + return (val); +} + +void +osl_pci_write_config(void *loc, uint offset, uint size, uint val) +{ + struct pci_dev *pdev; + uint retry=PCI_CFG_RETRY; + + /* only 4byte access supported */ + ASSERT(size == 4); + + pdev = (struct pci_dev*)loc; + + do { + pci_write_config_dword(pdev, offset, val); + if (offset!=PCI_BAR0_WIN) + break; + if (osl_pci_read_config(loc,offset,size) == val) + break; + } while (retry--); + +} + +static void +osl_pcmcia_attr(void *osh, uint offset, char *buf, int size, bool write) +{ +} + +void +osl_pcmcia_read_attr(void *osh, uint offset, void *buf, int size) +{ + osl_pcmcia_attr(osh, offset, (char *) buf, size, FALSE); +} + +void +osl_pcmcia_write_attr(void *osh, uint offset, void *buf, int size) +{ + osl_pcmcia_attr(osh, offset, (char *) buf, size, TRUE); +} + +#if defined(BINOSL) + +void +osl_assert(char *exp, char *file, int line) +{ + char tempbuf[255]; + + sprintf(tempbuf, "assertion \"%s\" failed: file \"%s\", line %d\n", exp, file, line); + panic(tempbuf); +} + + + +void* +osl_malloc(uint size) +{ + return (kmalloc(size, GFP_ATOMIC)); +} + +void +osl_mfree(void *addr, uint size) +{ + kfree(addr); +} + +uint +osl_malloced(void) +{ +#ifdef MODULE + return malloced; +#else + return 0; +#endif +} + +#endif /* defined(BCMDBG) || defined(BINOSL) */ + +/* + * BINOSL selects the slightly slower function-call-based binary compatible osl. + */ +#ifdef BINOSL + +int +osl_printf(const char *format, ...) +{ + va_list args; + char buf[1024]; + int len; + + /* sprintf into a local buffer because there *is* no "vprintk()".. */ + va_start(args, format); + len = vsprintf(buf, format, args); + va_end(args); + + if (len > sizeof (buf)) { + printk("osl_printf: buffer overrun\n"); + return (0); + } + + return (printk(buf)); +} + +int +osl_sprintf(char *buf, const char *format, ...) +{ + va_list args; + int rc; + + va_start(args, format); + rc = vsprintf(buf, format, args); + va_end(args); + return (rc); +} + +int +osl_strcmp(const char *s1, const char *s2) +{ + return (strcmp(s1, s2)); +} + +int +osl_strncmp(const char *s1, const char *s2, uint n) +{ + return (strncmp(s1, s2, n)); +} + +int +osl_strlen(char *s) +{ + return (strlen(s)); +} + +char* +osl_strcpy(char *d, const char *s) +{ + return (strcpy(d, s)); +} + +char* +osl_strncpy(char *d, const char *s, uint n) +{ + return (strncpy(d, s, n)); +} + +void +bcopy(const void *src, void *dst, int len) +{ + memcpy(dst, src, len); +} + +int +bcmp(const void *b1, const void *b2, int len) +{ + return (memcmp(b1, b2, len)); +} + +void +bzero(void *b, int len) +{ + memset(b, '\0', len); +} + +uint32 +osl_readl(volatile uint32 *r) +{ + return (readl(r)); +} + +uint16 +osl_readw(volatile uint16 *r) +{ + return (readw(r)); +} + +uint8 +osl_readb(volatile uint8 *r) +{ + return (readb(r)); +} + +void +osl_writel(uint32 v, volatile uint32 *r) +{ + writel(v, r); +} + +void +osl_writew(uint16 v, volatile uint16 *r) +{ + writew(v, r); +} + +void +osl_writeb(uint8 v, volatile uint8 *r) +{ + writeb(v, r); +} + +void * +osl_uncached(void *va) +{ +#ifdef mips + return ((void*)KSEG1ADDR(va)); +#else + return ((void*)va); +#endif +} + +uint +osl_getcycles(void) +{ + uint cycles; + +#if defined(mips) + cycles = read_c0_count() * 2; +#elif defined(__i386__) + rdtscl(cycles); +#else + cycles = 0; +#endif + return cycles; +} + +void * +osl_reg_map(uint32 pa, uint size) +{ + return (ioremap_nocache((unsigned long)pa, (unsigned long)size)); +} + +void +osl_reg_unmap(void *va) +{ + iounmap(va); +} + +int +osl_busprobe(uint32 *val, uint32 addr) +{ +#ifdef mips + return get_dbe(*val, (uint32*)addr); +#else + *val = readl(addr); + return 0; +#endif +} + +void* +osl_dma_alloc_consistent(void *dev, uint size, ulong *pap) +{ + return (pci_alloc_consistent((struct pci_dev*)dev, size, (dma_addr_t*)pap)); +} + +void +osl_dma_free_consistent(void *dev, void *va, uint size, ulong pa) +{ + pci_free_consistent((struct pci_dev*)dev, size, va, (dma_addr_t)pa); +} + +uint +osl_dma_map(void *dev, void *va, uint size, int direction) +{ + int dir; + + dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE; + return (pci_map_single(dev, va, size, dir)); +} + +void +osl_dma_unmap(void *dev, uint pa, uint size, int direction) +{ + int dir; + + dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE; + pci_unmap_single(dev, (uint32)pa, size, dir); +} + +void +osl_delay(uint usec) +{ + udelay(usec); +} + +uchar* +osl_pktdata(void *drv, void *skb) +{ + return (((struct sk_buff*)skb)->data); +} + +uint +osl_pktlen(void *drv, void *skb) +{ + return (((struct sk_buff*)skb)->len); +} + +uint +osl_pktheadroom(void *drv, void *skb) +{ + return (uint) skb_headroom((struct sk_buff *) skb); +} + +uint +osl_pkttailroom(void *drv, void *skb) +{ + return (uint) skb_tailroom((struct sk_buff *) skb); +} + +void* +osl_pktnext(void *drv, void *skb) +{ + return (((struct sk_buff*)skb)->next); +} + +void +osl_pktsetnext(void *skb, void *x) +{ + ((struct sk_buff*)skb)->next = (struct sk_buff*)x; +} + +void +osl_pktsetlen(void *drv, void *skb, uint len) +{ + __skb_trim((struct sk_buff*)skb, len); +} + +uchar* +osl_pktpush(void *drv, void *skb, int bytes) +{ + return (skb_push((struct sk_buff*)skb, bytes)); +} + +uchar* +osl_pktpull(void *drv, void *skb, int bytes) +{ + return (skb_pull((struct sk_buff*)skb, bytes)); +} + +void* +osl_pktdup(void *drv, void *skb) +{ + return (skb_clone((struct sk_buff*)skb, GFP_ATOMIC)); +} + +void* +osl_pktcookie(void *skb) +{ + return ((void*)((struct sk_buff*)skb)->csum); +} + +void +osl_pktsetcookie(void *skb, void *x) +{ + ((struct sk_buff*)skb)->csum = (uint)x; +} + +void* +osl_pktlink(void *skb) +{ + return (((struct sk_buff*)skb)->prev); +} + +void +osl_pktsetlink(void *skb, void *x) +{ + ((struct sk_buff*)skb)->prev = (struct sk_buff*)x; +} + +uint +osl_pktprio(void *skb) +{ + return (((struct sk_buff*)skb)->priority); +} + +void +osl_pktsetprio(void *skb, uint x) +{ + ((struct sk_buff*)skb)->priority = x; +} + +#endif /* BINOSL */ diff --git a/package/linux/kernel-source/drivers/net/hnd/sbutils.c b/package/linux/kernel-source/drivers/net/hnd/sbutils.c new file mode 100644 index 000000000..50ec33986 --- /dev/null +++ b/package/linux/kernel-source/drivers/net/hnd/sbutils.c @@ -0,0 +1,2164 @@ +/* + * Misc utility routines for accessing chip-specific features + * of the SiliconBackplane-based Broadcom chips. + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * $Id$ + */ + +#include <typedefs.h> +#include <osl.h> +#include <bcmutils.h> +#include <bcmdevs.h> +#include <sbconfig.h> +#include <sbchipc.h> +#include <sbpci.h> +#include <pcicfg.h> +#include <sbpcmcia.h> +#include <sbextif.h> +#include <sbutils.h> +#include <bcmsrom.h> + +/* debug/trace */ +#define SB_ERROR(args) + +typedef uint32 (*sb_intrsoff_t)(void *intr_arg); +typedef void (*sb_intrsrestore_t)(void *intr_arg, uint32 arg); +typedef bool (*sb_intrsenabled_t)(void *intr_arg); + +/* misc sb info needed by some of the routines */ +typedef struct sb_info { + uint chip; /* chip number */ + uint chiprev; /* chip revision */ + uint chippkg; /* chip package option */ + uint boardtype; /* board type */ + uint boardvendor; /* board vendor id */ + uint bus; /* what bus type we are going through */ + + void *osh; /* osl os handle */ + void *sdh; /* bcmsdh handle */ + + void *curmap; /* current regs va */ + void *regs[SB_MAXCORES]; /* other regs va */ + + uint curidx; /* current core index */ + uint dev_coreid; /* the core provides driver functions */ + uint pciidx; /* pci core index */ + uint pcirev; /* pci core rev */ + + uint pcmciaidx; /* pcmcia core index */ + uint pcmciarev; /* pcmcia core rev */ + bool memseg; /* flag to toggle MEM_SEG register */ + + uint ccrev; /* chipc core rev */ + + uint gpioidx; /* gpio control core index */ + uint gpioid; /* gpio control coretype */ + + uint numcores; /* # discovered cores */ + uint coreid[SB_MAXCORES]; /* id of each core */ + + void *intr_arg; /* interrupt callback function arg */ + sb_intrsoff_t intrsoff_fn; /* function turns chip interrupts off */ + sb_intrsrestore_t intrsrestore_fn; /* function restore chip interrupts */ + sb_intrsenabled_t intrsenabled_fn; /* function to check if chip interrupts are enabled */ +} sb_info_t; + +/* local prototypes */ +static void* sb_doattach(sb_info_t *si, uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz); +static void sb_scan(sb_info_t *si); +static uint sb_corereg(void *sbh, uint coreidx, uint regoff, uint mask, uint val); +static uint _sb_coreidx(void *sbh); +static uint sb_findcoreidx(void *sbh, uint coreid, uint coreunit); +static uint sb_pcidev2chip(uint pcidev); +static uint sb_chip2numcores(uint chip); + +#define SB_INFO(sbh) (sb_info_t*)sbh +#define SET_SBREG(sbh, r, mask, val) W_SBREG((sbh), (r), ((R_SBREG((sbh), (r)) & ~(mask)) | (val))) +#define GOODCOREADDR(x) (((x) >= SB_ENUM_BASE) && ((x) <= SB_ENUM_LIM) && ISALIGNED((x), SB_CORE_SIZE)) +#define GOODREGS(regs) (regs && ISALIGNED(regs, SB_CORE_SIZE)) +#define REGS2SB(va) (sbconfig_t*) ((uint)(va) + SBCONFIGOFF) +#define GOODIDX(idx) (((uint)idx) < SB_MAXCORES) +#define BADIDX (SB_MAXCORES+1) + +#define R_SBREG(sbh, sbr) sb_read_sbreg((sbh), (sbr)) +#define W_SBREG(sbh, sbr, v) sb_write_sbreg((sbh), (sbr), (v)) +#define AND_SBREG(sbh, sbr, v) W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) & (v))) +#define OR_SBREG(sbh, sbr, v) W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) | (v))) + +/* + * Macros to disable/restore function core(D11, ENET, ILINE20, etc) interrupts before/ + * after core switching to avoid invalid register accesss inside ISR. + */ +#define INTR_OFF(si, intr_val) \ + if ((si)->intrsoff_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \ + intr_val = (*(si)->intrsoff_fn)((si)->intr_arg); } +#define INTR_RESTORE(si, intr_val) \ + if ((si)->intrsrestore_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \ + (*(si)->intrsrestore_fn)((si)->intr_arg, intr_val); } + +/* power control defines */ +#define LPOMINFREQ 25000 /* low power oscillator min */ +#define LPOMAXFREQ 43000 /* low power oscillator max */ +#define XTALMINFREQ 19800000 /* 20mhz - 1% */ +#define XTALMAXFREQ 20200000 /* 20mhz + 1% */ +#define PCIMINFREQ 25000000 /* 25mhz */ +#define PCIMAXFREQ 34000000 /* 33mhz + fudge */ +#define SCC_DEF_DIV 0 /* default slow clock divider */ + +#define XTAL_ON_DELAY 1000 /* Xtal power on delay in us */ + +#define SCC_LOW2FAST_LIMIT 5000 /* turn on fast clock time, in unit of ms */ + + +static uint32 +sb_read_sbreg(void *sbh, volatile uint32 *sbr) +{ + sb_info_t *si; + uint8 tmp; + uint32 val, intr_val = 0; + + si = SB_INFO(sbh); + + /* + * compact flash only has 11 bits address, while we needs 12 bits address. + * MEM_SEG will be OR'd with other 11 bits address in hardware, + * so we program MEM_SEG with 12th bit when necessary(access sb regsiters). + * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special + */ + if(si->memseg) { + INTR_OFF(si, intr_val); + tmp = 1; + OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1); + (uint32)sbr &= ~(1 << 11); /* mask out bit 11*/ + } + + val = R_REG(sbr); + + if(si->memseg) { + tmp = 0; + OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1); + INTR_RESTORE(si, intr_val); + } + + return (val); +} + +static void +sb_write_sbreg(void *sbh, volatile uint32 *sbr, uint32 v) +{ + sb_info_t *si; + uint8 tmp; + volatile uint32 dummy; + uint32 intr_val = 0; + + si = SB_INFO(sbh); + + /* + * compact flash only has 11 bits address, while we needs 12 bits address. + * MEM_SEG will be OR'd with other 11 bits address in hardware, + * so we program MEM_SEG with 12th bit when necessary(access sb regsiters). + * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special + */ + if(si->memseg) { + INTR_OFF(si, intr_val); + tmp = 1; + OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1); + (uint32)sbr &= ~(1 << 11); /* mask out bit 11 */ + } + + if (si->bus == PCMCIA_BUS) { +#ifdef IL_BIGENDIAN + dummy = R_REG(sbr); + W_REG((volatile uint16 *)((uint32)sbr + 2), (uint16)((v >> 16) & 0xffff)); + dummy = R_REG(sbr); + W_REG((volatile uint16 *)sbr, (uint16)(v & 0xffff)); +#else + dummy = R_REG(sbr); + W_REG((volatile uint16 *)sbr, (uint16)(v & 0xffff)); + dummy = R_REG(sbr); + W_REG((volatile uint16 *)((uint32)sbr + 2), (uint16)((v >> 16) & 0xffff)); +#endif + } else + W_REG(sbr, v); + + if(si->memseg) { + tmp = 0; + OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1); + INTR_RESTORE(si, intr_val); + } +} + +/* + * Allocate a sb handle. + * devid - pci device id (used to determine chip#) + * osh - opaque OS handle + * regs - virtual address of initial core registers + * bustype - pci/pcmcia/sb/sdio/etc + * vars - pointer to a pointer area for "environment" variables + * varsz - pointer to int to return the size of the vars + */ +void* +sb_attach(uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz) +{ + sb_info_t *si; + + /* alloc sb_info_t */ + if ((si = MALLOC(sizeof (sb_info_t))) == NULL) { + SB_ERROR(("sb_attach: malloc failed!\n")); + return (NULL); + } + + return (sb_doattach(si, devid, osh, regs, bustype, sdh, vars, varsz)); +} + +/* global kernel resource */ +static sb_info_t ksi; + +/* generic kernel variant of sb_attach() */ +void* +sb_kattach() +{ + uint32 *regs; + char *unused; + int varsz; + + if (ksi.curmap == NULL) { + uint32 cid; + + regs = (uint32 *)REG_MAP(SB_ENUM_BASE, SB_CORE_SIZE); + cid = R_REG((uint32 *)regs); + if (((cid & CID_ID_MASK) == 0x4712) && + ((cid & CID_REV_MASK) <= 0x00020000)) { + uint32 *scc, val; + + scc = (uint32 *)((uint32)regs + OFFSETOF(chipcregs_t, slow_clk_ctl)); + val = R_REG(scc); + SB_ERROR((" initial scc = 0x%x\n", val)); + val |= SCC_SS_XTAL; + W_REG(scc, val); + } + + sb_doattach(&ksi, BCM4710_DEVICE_ID, NULL, (void*)regs, + SB_BUS, NULL, &unused, &varsz); + } + + return &ksi; +} + +static void* +sb_doattach(sb_info_t *si, uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz) +{ + uint origidx; + chipcregs_t *cc; + uint32 w; + + ASSERT(GOODREGS(regs)); + + bzero((uchar*)si, sizeof (sb_info_t)); + + si->pciidx = si->gpioidx = BADIDX; + + si->osh = osh; + si->curmap = regs; + si->sdh = sdh; + + /* check to see if we are a sb core mimic'ing a pci core */ + if (bustype == PCI_BUS) { + if (OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof (uint32)) == 0xffffffff) + bustype = SB_BUS; + else + bustype = PCI_BUS; + } + + si->bus = bustype; + + if (si->bus == PCMCIA_BUS) + /* need to set memseg flag for CF card first before any sb registers access, + * such as the access inside sb_scan. the card type is detected and memseg + * flag is reassigned later after srom_var_init. there should be no effect + * for PCMCIA cards even though the memseg flag is set + */ + si->memseg = TRUE; + + /* kludge to enable the clock on the 4306 which lacks a slowclock */ + if (si->bus == PCI_BUS) + sb_pwrctl_xtal((void*)si, XTAL|PLL, ON); + + /* initialize current core index value */ + si->curidx = _sb_coreidx((void*)si); + if (si->curidx == BADIDX) + goto bad; + + /* keep and reuse the initial register mapping */ + origidx = si->curidx; + if (si->bus == SB_BUS) + si->regs[origidx] = regs; + + /* is core-0 a chipcommon core? */ + si->numcores = 1; + cc = (chipcregs_t*) sb_setcoreidx((void*)si, 0); + if (sb_coreid((void*)si) != SB_CC) + cc = NULL; + + /* determine chip id and rev */ + if (cc) { + /* chip common core found! */ + si->chip = R_REG(&cc->chipid) & CID_ID_MASK; + si->chiprev = (R_REG(&cc->chipid) & CID_REV_MASK) >> CID_REV_SHIFT; + si->chippkg = (R_REG(&cc->chipid) & CID_PKG_MASK) >> CID_PKG_SHIFT; + } else { + /* The only pcmcia chip without a chipcommon core is a 4301 */ + if (si->bus == PCMCIA_BUS) + devid = BCM4301_DEVICE_ID; + + /* no chip common core -- must convert device id to chip id */ + if ((si->chip = sb_pcidev2chip(devid)) == 0) { + SB_ERROR(("sb_attach: unrecognized device id 0x%04x\n", devid)); + goto bad; + } + } + + /* get chipcommon rev */ + si->ccrev = cc? sb_corerev((void*)si) : 0; + + /* determine numcores */ + if ((si->ccrev == 4) || (si->ccrev >= 6)) + si->numcores = (R_REG(&cc->chipid) & CID_CC_MASK) >> CID_CC_SHIFT; + else + si->numcores = sb_chip2numcores(si->chip); + + /* return to original core */ + sb_setcoreidx((void*)si, origidx); + + /* sanity checks */ + ASSERT(si->chip); + + /* scan for cores */ + sb_scan(si); + + /* initialize the vars after sb_scan so that the core rev. information + * collected by sb_scan is available for the srom_var_init. + */ + if (srom_var_init(si, si->bus, si->curmap, osh, vars, varsz)) { + SB_ERROR(("sb_attach: srom_var_init failed\n")); + goto bad; + } + + if (cc == NULL) { + /* + * The chip revision number is hardwired into all + * of the pci function config rev fields and is + * independent from the individual core revision numbers. + * For example, the "A0" silicon of each chip is chip rev 0. + * For PCMCIA we get it from the CIS instead. + */ + if (si->bus == PCMCIA_BUS) { + ASSERT(vars); + si->chiprev = getintvar(*vars, "chiprev"); + } else if (si->bus == PCI_BUS) { + w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_REV, sizeof (uint32)); + si->chiprev = w & 0xff; + } else + si->chiprev = 0; + } + + if (si->bus == PCMCIA_BUS) { + w = getintvar(*vars, "regwindowsz"); + si->memseg = (w <= CFTABLE_REGWIN_2K) ? TRUE : FALSE; + } + + /* pci core is required */ + if (!GOODIDX(si->pciidx)) { + SB_ERROR(("sb_attach: pci core not found\n")); + goto bad; + } + + /* gpio control core is required */ + if (!GOODIDX(si->gpioidx)) { + SB_ERROR(("sb_attach: gpio control core not found\n")); + goto bad; + } + + /* get boardtype and boardrev */ + switch (si->bus) { + case PCI_BUS: + /* do a pci config read to get subsystem id and subvendor id */ + w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_SVID, sizeof (uint32)); + si->boardvendor = w & 0xffff; + si->boardtype = (w >> 16) & 0xffff; + break; + + case PCMCIA_BUS: + case SDIO_BUS: + si->boardvendor = getintvar(*vars, "manfid"); + si->boardtype = getintvar(*vars, "prodid"); + break; + + case SB_BUS: + si->boardvendor = VENDOR_BROADCOM; + si->boardtype = 0xffff; + break; + } + + if (si->boardtype == 0) { + SB_ERROR(("sb_attach: unknown board type\n")); + ASSERT(si->boardtype); + } + + /* clear any previous epidiag-induced target abort */ + sb_taclear((void*)si); + + return ((void*)si); + +bad: + MFREE(si, sizeof (sb_info_t)); + return (NULL); +} + +uint +sb_coreid(void *sbh) +{ + sb_info_t *si; + sbconfig_t *sb; + + si = SB_INFO(sbh); + sb = REGS2SB(si->curmap); + + return ((R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT); +} + +uint +sb_coreidx(void *sbh) +{ + sb_info_t *si; + + si = SB_INFO(sbh); + return (si->curidx); +} + +/* return current index of core */ +static uint +_sb_coreidx(void *sbh) +{ + sb_info_t *si; + sbconfig_t *sb; + uint32 sbaddr = 0; + + si = SB_INFO(sbh); + ASSERT(si); + + switch (si->bus) { + case SB_BUS: + sb = REGS2SB(si->curmap); + sbaddr = sb_base(R_SBREG(sbh, &sb->sbadmatch0)); + break; + + case PCI_BUS: + sbaddr = OSL_PCI_READ_CONFIG(si->osh, PCI_BAR0_WIN, sizeof (uint32)); + break; + + case PCMCIA_BUS: { + uint8 tmp; + + OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1); + sbaddr = (uint)tmp << 12; + OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1); + sbaddr |= (uint)tmp << 16; + OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1); + sbaddr |= (uint)tmp << 24; + break; + } + default: + ASSERT(0); + } + + if (!GOODCOREADDR(sbaddr)) + return BADIDX; + + return ((sbaddr - SB_ENUM_BASE) / SB_CORE_SIZE); +} + +uint +sb_corevendor(void *sbh) +{ + sb_info_t *si; + sbconfig_t *sb; + + si = SB_INFO(sbh); + sb = REGS2SB(si->curmap); + + return ((R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT); +} + +uint +sb_corerev(void *sbh) +{ + sb_info_t *si; + sbconfig_t *sb; + + si = SB_INFO(sbh); + sb = REGS2SB(si->curmap); + + return (R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_RC_MASK); +} + +#define SBTML_ALLOW (SBTML_PE | SBTML_FGC | SBTML_FL_MASK) + +/* set/clear sbtmstatelow core-specific flags */ +uint32 +sb_coreflags(void *sbh, uint32 mask, uint32 val) +{ + sb_info_t *si; + sbconfig_t *sb; + uint32 w; + + si = SB_INFO(sbh); + sb = REGS2SB(si->curmap); + + ASSERT((val & ~mask) == 0); + ASSERT((mask & ~SBTML_ALLOW) == 0); + + /* mask and set */ + if (mask || val) { + w = (R_SBREG(sbh, &sb->sbtmstatelow) & ~mask) | val; + W_SBREG(sbh, &sb->sbtmstatelow, w); + } + + /* return the new value */ + return (R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_ALLOW); +} + +/* set/clear sbtmstatehigh core-specific flags */ +uint32 +sb_coreflagshi(void *sbh, uint32 mask, uint32 val) +{ + sb_info_t *si; + sbconfig_t *sb; + uint32 w; + + si = SB_INFO(sbh); + sb = REGS2SB(si->curmap); + + ASSERT((val & ~mask) == 0); + ASSERT((mask & ~SBTMH_FL_MASK) == 0); + + /* mask and set */ + if (mask || val) { + w = (R_SBREG(sbh, &sb->sbtmstatehigh) & ~mask) | val; + W_SBREG(sbh, &sb->sbtmstatehigh, w); + } + + /* return the new value */ + return (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_FL_MASK); +} + +bool +sb_iscoreup(void *sbh) +{ + sb_info_t *si; + sbconfig_t *sb; + + si = SB_INFO(sbh); + sb = REGS2SB(si->curmap); + + return ((R_SBREG(sbh, &(sb)->sbtmstatelow) & (SBTML_RESET | SBTML_REJ | SBTML_CLK)) == SBTML_CLK); +} + +/* + * Switch to 'coreidx', issue a single arbitrary 32bit register mask&set operation, + * switch back to the original core, and return the new value. + */ +static uint +sb_corereg(void *sbh, uint coreidx, uint regoff, uint mask, uint val) +{ + sb_info_t *si; + uint origidx; + uint32 *r; + uint w; + uint intr_val = 0; + + ASSERT(GOODIDX(coreidx)); + ASSERT(regoff < SB_CORE_SIZE); + ASSERT((val & ~mask) == 0); + + si = SB_INFO(sbh); + + INTR_OFF(si, intr_val); + + /* save current core index */ + origidx = sb_coreidx(sbh); + + /* switch core */ + r = (uint32*) ((uint) sb_setcoreidx(sbh, coreidx) + regoff); + + /* mask and set */ + if (mask || val) { + if (regoff >= SBCONFIGOFF) { + w = (R_SBREG(sbh, r) & ~mask) | val; + W_SBREG(sbh, r, w); + } else { + w = (R_REG(r) & ~mask) | val; + W_REG(r, w); + } + } + + /* readback */ + if (regoff >= SBCONFIGOFF) + w = R_SBREG(sbh, r); + else + w = R_REG(r); + + /* restore core index */ + if (origidx != coreidx) + sb_setcoreidx(sbh, origidx); + + INTR_RESTORE(si, intr_val); + return (w); +} + +/* scan the sb enumerated space to identify all cores */ +static void +sb_scan(sb_info_t *si) +{ + void *sbh; + uint origidx; + uint i; + + sbh = (void*) si; + + /* numcores should already be set */ + ASSERT((si->numcores > 0) && (si->numcores <= SB_MAXCORES)); + + /* save current core index */ + origidx = sb_coreidx(sbh); + + si->pciidx = si->gpioidx = BADIDX; + + for (i = 0; i < si->numcores; i++) { + sb_setcoreidx(sbh, i); + si->coreid[i] = sb_coreid(sbh); + + if (si->coreid[i] == SB_PCI) { + si->pciidx = i; + si->pcirev = sb_corerev(sbh); + + } else if (si->coreid[i] == SB_PCMCIA) { + si->pcmciaidx = i; + si->pcmciarev = sb_corerev(sbh); + } + } + + /* + * Find the gpio "controlling core" type and index. + * Precedence: + * - if there's a chip common core - use that + * - else if there's a pci core (rev >= 2) - use that + * - else there had better be an extif core (4710 only) + */ + if (GOODIDX(sb_findcoreidx(sbh, SB_CC, 0))) { + si->gpioidx = sb_findcoreidx(sbh, SB_CC, 0); + si->gpioid = SB_CC; + } else if (GOODIDX(si->pciidx) && (si->pcirev >= 2)) { + si->gpioidx = si->pciidx; + si->gpioid = SB_PCI; + } else if (sb_findcoreidx(sbh, SB_EXTIF, 0)) { + si->gpioidx = sb_findcoreidx(sbh, SB_EXTIF, 0); + si->gpioid = SB_EXTIF; + } + + /* return to original core index */ + sb_setcoreidx(sbh, origidx); +} + +/* may be called with core in reset */ +void +sb_detach(void *sbh) +{ + sb_info_t *si; + uint idx; + + si = SB_INFO(sbh); + + if (si == NULL) + return; + + if (si->bus == SB_BUS) + for (idx = 0; idx < SB_MAXCORES; idx++) + if (si->regs[idx]) { + REG_UNMAP(si->regs[idx]); + si->regs[idx] = NULL; + } + + MFREE(si, sizeof (sb_info_t)); +} + +/* use pci dev id to determine chip id for chips not having a chipcommon core */ +static uint +sb_pcidev2chip(uint pcidev) +{ + if ((pcidev >= BCM4710_DEVICE_ID) && (pcidev <= BCM47XX_USB_ID)) + return (BCM4710_DEVICE_ID); + if ((pcidev >= BCM4610_DEVICE_ID) && (pcidev <= BCM4610_USB_ID)) + return (BCM4610_DEVICE_ID); + if ((pcidev >= BCM4402_DEVICE_ID) && (pcidev <= BCM4402_V90_ID)) + return (BCM4402_DEVICE_ID); + if ((pcidev >= BCM4307_V90_ID) && (pcidev <= BCM4307_D11B_ID)) + return (BCM4307_DEVICE_ID); + if (pcidev == BCM4301_DEVICE_ID) + return (BCM4301_DEVICE_ID); + + return (0); +} + +/* convert chip number to number of i/o cores */ +static uint +sb_chip2numcores(uint chip) +{ + if (chip == 0x4710) + return (9); + if (chip == 0x4610) + return (9); + if (chip == 0x4402) + return (3); + if ((chip == 0x4307) || (chip == 0x4301)) + return (5); + if (chip == 0x4310) + return (8); + if (chip == 0x4306) /* < 4306c0 */ + return (6); + if (chip == 0x4704) + return (9); + if (chip == 0x5365) + return (7); + + SB_ERROR(("sb_chip2numcores: unsupported chip 0x%x\n", chip)); + ASSERT(0); + return (1); +} + +/* return index of coreid or BADIDX if not found */ +static uint +sb_findcoreidx(void *sbh, uint coreid, uint coreunit) +{ + sb_info_t *si; + uint found; + uint i; + + si = SB_INFO(sbh); + found = 0; + + for (i = 0; i < si->numcores; i++) + if (si->coreid[i] == coreid) { + if (found == coreunit) + return (i); + found++; + } + + return (BADIDX); +} + +/* + * this function changes logical "focus" to the indiciated core, + * must be called with interrupt off. + * Moreover, callers should keep interrupts off during switching out of and back to d11 core + */ +void* +sb_setcoreidx(void *sbh, uint coreidx) +{ + sb_info_t *si; + uint32 sbaddr; + uint8 tmp; + + si = SB_INFO(sbh); + + if (coreidx >= si->numcores) + return (NULL); + + /* + * If the user has provided an interrupt mask enabled function, + * then assert interrupts are disabled before switching the core. + */ + ASSERT((si->intrsenabled_fn == NULL) || !(*(si)->intrsenabled_fn)((si)->intr_arg)); + + sbaddr = SB_ENUM_BASE + (coreidx * SB_CORE_SIZE); + + switch (si->bus) { + case SB_BUS: + /* map new one */ + if (!si->regs[coreidx]) { + si->regs[coreidx] = (void*)REG_MAP(sbaddr, SB_CORE_SIZE); + ASSERT(GOODREGS(si->regs[coreidx])); + } + si->curmap = si->regs[coreidx]; + break; + + case PCI_BUS: + /* point bar0 window */ + OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, 4, sbaddr); + break; + + case PCMCIA_BUS: + tmp = (sbaddr >> 12) & 0x0f; + OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1); + tmp = (sbaddr >> 16) & 0xff; + OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1); + tmp = (sbaddr >> 24) & 0xff; + OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1); + break; + } + + si->curidx = coreidx; + + return (si->curmap); +} + +/* + * this function changes logical "focus" to the indiciated core, + * must be called with interrupt off. + * Moreover, callers should keep interrupts off during switching out of and back to d11 core + */ +void* +sb_setcore(void *sbh, uint coreid, uint coreunit) +{ + sb_info_t *si; + uint idx; + + si = SB_INFO(sbh); + + idx = sb_findcoreidx(sbh, coreid, coreunit); + if (!GOODIDX(idx)) + return (NULL); + + return (sb_setcoreidx(sbh, idx)); +} + +/* return chip number */ +uint +sb_chip(void *sbh) +{ + sb_info_t *si; + + si = SB_INFO(sbh); + return (si->chip); +} + +/* return chip revision number */ +uint +sb_chiprev(void *sbh) +{ + sb_info_t *si; + + si = SB_INFO(sbh); + return (si->chiprev); +} + +/* return chip common revision number */ +uint +sb_chipcrev(void *sbh) +{ + sb_info_t *si; + + si = SB_INFO(sbh); + return (si->ccrev); +} + +/* return chip package option */ +uint +sb_chippkg(void *sbh) +{ + sb_info_t *si; + + si = SB_INFO(sbh); + return (si->chippkg); +} + +/* return PCI core rev. */ +uint +sb_pcirev(void *sbh) +{ + sb_info_t *si; + + si = SB_INFO(sbh); + return (si->pcirev); +} + +/* return PCMCIA core rev. */ +uint +sb_pcmciarev(void *sbh) +{ + sb_info_t *si; + + si = SB_INFO(sbh); + return (si->pcmciarev); +} + +/* return board vendor id */ +uint +sb_boardvendor(void *sbh) +{ + sb_info_t *si; + + si = SB_INFO(sbh); + return (si->boardvendor); +} + +/* return boardtype */ +uint +sb_boardtype(void *sbh) +{ + sb_info_t *si; + char *var; + + si = SB_INFO(sbh); + + if (si->bus == SB_BUS && si->boardtype == 0xffff) { + /* boardtype format is a hex string */ + si->boardtype = getintvar(NULL, "boardtype"); + + /* backward compatibility for older boardtype string format */ + if ((si->boardtype == 0) && (var = getvar(NULL, "boardtype"))) { + if (!strcmp(var, "bcm94710dev")) + si->boardtype = BCM94710D_BOARD; + else if (!strcmp(var, "bcm94710ap")) + si->boardtype = BCM94710AP_BOARD; + else if (!strcmp(var, "bcm94310u")) + si->boardtype = BCM94310U_BOARD; + else if (!strcmp(var, "bu4711")) + si->boardtype = BU4711_BOARD; + else if (!strcmp(var, "bu4710")) + si->boardtype = BU4710_BOARD; + else if (!strcmp(var, "bcm94702mn")) + si->boardtype = BCM94702MN_BOARD; + else if (!strcmp(var, "bcm94710r1")) + si->boardtype = BCM94710R1_BOARD; + else if (!strcmp(var, "bcm94710r4")) + si->boardtype = BCM94710R4_BOARD; + else if (!strcmp(var, "bcm94702cpci")) + si->boardtype = BCM94702CPCI_BOARD; + else if (!strcmp(var, "bcm95380_rr")) + si->boardtype = BCM95380RR_BOARD; + } + } + + return (si->boardtype); +} + +/* return board bus style */ +uint +sb_boardstyle(void *sbh) +{ + sb_info_t *si; + uint16 w; + + si = SB_INFO(sbh); + + if (si->bus == PCMCIA_BUS) + return (BOARDSTYLE_PCMCIA); + + if (si->bus == SB_BUS) + return (BOARDSTYLE_SOC); + + /* bus is PCI */ + + if (OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_CIS, sizeof (uint32)) != 0) + return (BOARDSTYLE_CARDBUS); + + if ((srom_read(si->bus, si->curmap, si->osh, (SPROM_SIZE - 1) * 2, 2, &w) == 0) && + (w == 0x0313)) + return (BOARDSTYLE_CARDBUS); + + return (BOARDSTYLE_PCI); +} + +/* return boolean if sbh device is in pci hostmode or client mode */ +uint +sb_bus(void *sbh) +{ + sb_info_t *si; + + si = SB_INFO(sbh); + return (si->bus); +} + +/* return list of found cores */ +uint +sb_corelist(void *sbh, uint coreid[]) +{ + sb_info_t *si; + + si = SB_INFO(sbh); + + bcopy((uchar*)si->coreid, (uchar*)coreid, (si->numcores * sizeof (uint))); + return (si->numcores); +} + +/* return current register mapping */ +void * +sb_coreregs(void *sbh) +{ + sb_info_t *si; + + si = SB_INFO(sbh); + ASSERT(GOODREGS(si->curmap)); + + return (si->curmap); +} + +/* traverse all cores to find and clear source of serror */ +static void +sb_serr_clear(void *sbh) +{ + sb_info_t *si; + sbconfig_t *sb; + uint origidx; + uint i, intr_val = 0; + void * corereg = NULL; + + si = SB_INFO(sbh); + + INTR_OFF(si, intr_val); + origidx = sb_coreidx(sbh); + + for (i = 0; i < si->numcores; i++) { + corereg = sb_setcoreidx(sbh, i); + if (NULL != corereg) { + sb = REGS2SB(corereg); + if ((si->chip == BCM4317_DEVICE_ID) && (si->chiprev == 0)) { + W_SBREG(sbh, &sb->sbtmstatehigh, 0); + } else { + if ((R_SBREG(sbh, &sb->sbtmstatehigh)) & SBTMH_SERR) { + AND_SBREG(sbh, &sb->sbtmstatehigh, ~SBTMH_SERR); + SB_ERROR(("sb_serr_clear: SError at core 0x%x\n", sb_coreid(sbh))); + } + } + } + } + + sb_setcoreidx(sbh, origidx); + INTR_RESTORE(si, intr_val); +} + +/* check if any inband, outband or timeout errors has happened and clear them */ +/* !! must be called with chip clk on */ +bool +sb_taclear(void *sbh) +{ + sb_info_t *si; + sbconfig_t *sb; + uint origidx; + uint intr_val = 0; + bool rc = FALSE; + uint32 inband = 0, serror = 0, timeout = 0; + void *corereg = NULL; + volatile uint32 imstate, tmstate; + + si = SB_INFO(sbh); + + if (si->bus == PCI_BUS) { + volatile uint32 stcmd; + + /* inband error is Target abort for PCI */ + stcmd = OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_CMD, sizeof(uint32)); + inband = stcmd & PCI_CFG_CMD_STAT_TA; + if (inband) + OSL_PCI_WRITE_CONFIG(si->osh, PCI_CFG_CMD, sizeof(uint32), stcmd); + + /* serror */ + stcmd = OSL_PCI_READ_CONFIG(si->osh, PCI_INT_STATUS, sizeof(uint32)); + serror = stcmd & PCI_SBIM_STATUS_SERR; + if (serror) { + sb_serr_clear(sbh); + OSL_PCI_WRITE_CONFIG(si->osh, PCI_INT_STATUS, sizeof(uint32), stcmd); + } + + /* timeout */ + imstate = sb_corereg(sbh, si->pciidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbimstate), 0, 0); + if ((imstate != 0xffffffff) && (imstate & (SBIM_IBE | SBIM_TO))) { + sb_corereg(sbh, si->pciidx, SBCONFIGOFF + OFFSETOF(sbconfig_t, sbimstate), ~0, + (imstate & ~(SBIM_IBE | SBIM_TO))); + /* inband = imstate & SBIM_IBE; same as TA above */ + timeout = imstate & SBIM_TO; + } + + } else if (si->bus == PCMCIA_BUS) { + + INTR_OFF(si, intr_val); + origidx = sb_coreidx(sbh); + + corereg = sb_setcore(sbh, SB_PCMCIA, 0); + if (NULL != corereg) { + sb = REGS2SB(corereg); + + imstate = R_SBREG(sbh, &sb->sbimstate); + /* handle surprise removal */ + if ((imstate != 0xffffffff) && (imstate & (SBIM_IBE | SBIM_TO))) { + AND_SBREG(sbh, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO)); + inband = imstate & SBIM_IBE; + timeout = imstate & SBIM_TO; + } + tmstate = R_SBREG(sbh, &sb->sbtmstatehigh); + if ((tmstate != 0xffffffff) && (tmstate & SBTMH_INT_STATUS)) { + if (!inband) { + serror = 1; + sb_serr_clear(sbh); + } + OR_SBREG(sbh, &sb->sbtmstatelow, SBTML_INT_ACK); + AND_SBREG(sbh, &sb->sbtmstatelow, ~SBTML_INT_ACK); + } + } + sb_setcoreidx(sbh, origidx); + INTR_RESTORE(si, intr_val); + + } else if (si->bus == SDIO_BUS) { + + INTR_OFF(si, intr_val); + origidx = sb_coreidx(sbh); + + corereg = sb_setcore(sbh, SB_PCMCIA, 0); + if (NULL != corereg) { + sb = REGS2SB(corereg); + + imstate = R_SBREG(sbh, &sb->sbimstate); + if ((imstate != 0xffffffff) && (imstate & (SBIM_IBE | SBIM_TO))) { + AND_SBREG(sbh, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO)); + /* inband = imstate & SBIM_IBE; cmd error */ + timeout = imstate & SBIM_TO; + } + tmstate = R_SBREG(sbh, &sb->sbtmstatehigh); + if ((tmstate != 0xffffffff) && (tmstate & SBTMH_INT_STATUS)) { + sb_serr_clear(sbh); + serror = 1; + OR_SBREG(sbh, &sb->sbtmstatelow, SBTML_INT_ACK); + AND_SBREG(sbh, &sb->sbtmstatelow, ~SBTML_INT_ACK); + } + } + + sb_setcoreidx(sbh, origidx); + INTR_RESTORE(si, intr_val); + } + + if ((inband | timeout | serror) != 0) { + rc = TRUE; + SB_ERROR(("sb_taclear: inband 0x%x, serror 0x%x, timeout 0x%x!\n", inband, serror, timeout)); + } + + return (rc); +} + +/* do buffered registers update */ +void +sb_commit(void *sbh) +{ + sb_info_t *si; + sbpciregs_t *pciregs; + uint origidx; + uint intr_val = 0; + + si = SB_INFO(sbh); + + origidx = si->curidx; + ASSERT(GOODIDX(origidx)); + + INTR_OFF(si, intr_val); + /* switch over to pci core */ + pciregs = (sbpciregs_t*) sb_setcore(sbh, SB_PCI, 0); + + /* do the buffer registers update */ + W_REG(&pciregs->bcastaddr, SB_COMMIT); + W_REG(&pciregs->bcastdata, 0x0); + + /* restore core index */ + sb_setcoreidx(sbh, origidx); + INTR_RESTORE(si, intr_val); +} + +/* reset and re-enable a core */ +void +sb_core_reset(void *sbh, uint32 bits) +{ + sb_info_t *si; + sbconfig_t *sb; + volatile uint32 dummy; + + si = SB_INFO(sbh); + ASSERT(GOODREGS(si->curmap)); + sb = REGS2SB(si->curmap); + + /* + * Must do the disable sequence first to work for arbitrary current core state. + */ + sb_core_disable(sbh, bits); + + /* + * Now do the initialization sequence. + */ + + /* set reset while enabling the clock and forcing them on throughout the core */ + W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | SBTML_RESET | bits)); + dummy = R_SBREG(sbh, &sb->sbtmstatelow); + + if (sb_coreid(sbh) == SB_ILINE100) { + bcm_mdelay(50); + } else { + OSL_DELAY(1); + } + + if (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_SERR) { + W_SBREG(sbh, &sb->sbtmstatehigh, 0); + } + if ((dummy = R_SBREG(sbh, &sb->sbimstate)) & (SBIM_IBE | SBIM_TO)) { + AND_SBREG(sbh, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO)); + } + + /* clear reset and allow it to propagate throughout the core */ + W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | bits)); + dummy = R_SBREG(sbh, &sb->sbtmstatelow); + OSL_DELAY(1); + + /* leave clock enabled */ + W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_CLK | bits)); + dummy = R_SBREG(sbh, &sb->sbtmstatelow); + OSL_DELAY(1); +} + +void +sb_core_tofixup(void *sbh) +{ + sb_info_t *si; + sbconfig_t *sb; + + si = SB_INFO(sbh); + + if (si->pcirev >= 5) + return; + + ASSERT(GOODREGS(si->curmap)); + sb = REGS2SB(si->curmap); + + if (si->bus == SB_BUS) { + SET_SBREG(sbh, &sb->sbimconfiglow, + SBIMCL_RTO_MASK | SBIMCL_STO_MASK, + (0x5 << SBIMCL_RTO_SHIFT) | 0x3); + } else { + if (sb_coreid(sbh) == SB_PCI) { + SET_SBREG(sbh, &sb->sbimconfiglow, + SBIMCL_RTO_MASK | SBIMCL_STO_MASK, + (0x3 << SBIMCL_RTO_SHIFT) | 0x2); + } else { + SET_SBREG(sbh, &sb->sbimconfiglow, (SBIMCL_RTO_MASK | SBIMCL_STO_MASK), 0); + } + } + + sb_commit(sbh); +} + +void +sb_core_disable(void *sbh, uint32 bits) +{ + sb_info_t *si; + volatile uint32 dummy; + sbconfig_t *sb; + + si = SB_INFO(sbh); + + ASSERT(GOODREGS(si->curmap)); + sb = REGS2SB(si->curmap); + + /* must return if core is already in reset */ + if (R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_RESET) + return; + + /* put into reset and return if clocks are not enabled */ + if ((R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_CLK) == 0) + goto disable; + + /* set the reject bit */ + W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_CLK | SBTML_REJ)); + + /* spin until reject is set */ + while ((R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_REJ) == 0) + OSL_DELAY(1); + + /* spin until sbtmstatehigh.busy is clear */ + while (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_BUSY) + OSL_DELAY(1); + + /* set reset and reject while enabling the clocks */ + W_SBREG(sbh, &sb->sbtmstatelow, (bits | SBTML_FGC | SBTML_CLK | SBTML_REJ | SBTML_RESET)); + dummy = R_SBREG(sbh, &sb->sbtmstatelow); + OSL_DELAY(10); + + disable: + /* leave reset and reject asserted */ + W_SBREG(sbh, &sb->sbtmstatelow, (bits | SBTML_REJ | SBTML_RESET)); + OSL_DELAY(1); +} + +void +sb_watchdog(void *sbh, uint ticks) +{ + sb_info_t *si = SB_INFO(sbh); + + /* instant NMI */ + switch (si->gpioid) { + case SB_CC: + sb_corereg(sbh, si->gpioidx, OFFSETOF(chipcregs_t, watchdog), ~0, ticks); + break; + case SB_EXTIF: + sb_corereg(sbh, si->gpioidx, OFFSETOF(extifregs_t, watchdog), ~0, ticks); + break; + } +} + +/* initialize the pcmcia core */ +void +sb_pcmcia_init(void *sbh) +{ + sb_info_t *si; + uint8 cor; + + si = SB_INFO(sbh); + + /* enable d11 mac interrupts */ + if (si->chip == BCM4301_DEVICE_ID) { + /* Have to use FCR2 in 4301 */ + OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR2 + PCMCIA_COR, &cor, 1); + cor |= COR_IRQEN | COR_FUNEN; + OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR2 + PCMCIA_COR, &cor, 1); + } else { + OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1); + cor |= COR_IRQEN | COR_FUNEN; + OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1); + } + +} + + +/* + * Configure the pci core for pci client (NIC) action + * and get appropriate dma offset value. + * coremask is the bitvec of cores by index to be enabled. + */ +void +sb_pci_setup(void *sbh, uint32 *dmaoffset, uint coremask) +{ + sb_info_t *si; + sbconfig_t *sb; + sbpciregs_t *pciregs; + uint32 sbflag; + uint32 w; + uint idx; + + si = SB_INFO(sbh); + + if (dmaoffset) + *dmaoffset = 0; + + /* if not pci bus, we're done */ + if (si->bus != PCI_BUS) + return; + + ASSERT(si->pciidx); + + /* get current core index */ + idx = si->curidx; + + /* we interrupt on this backplane flag number */ + ASSERT(GOODREGS(si->curmap)); + sb = REGS2SB(si->curmap); + sbflag = R_SBREG(sbh, &sb->sbtpsflag) & SBTPS_NUM0_MASK; + + /* switch over to pci core */ + pciregs = (sbpciregs_t*) sb_setcoreidx(sbh, si->pciidx); + sb = REGS2SB(pciregs); + + /* + * Enable sb->pci interrupts. Assume + * PCI rev 2.3 support was added in pci core rev 6 and things changed.. + */ + if (si->pcirev < 6) { + /* set sbintvec bit for our flag number */ + OR_SBREG(sbh, &sb->sbintvec, (1 << sbflag)); + } else { + /* pci config write to set this core bit in PCIIntMask */ + w = OSL_PCI_READ_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32)); + w |= (coremask << PCI_SBIM_SHIFT); + OSL_PCI_WRITE_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32), w); + } + + /* enable prefetch and bursts for sonics-to-pci translation 2 */ + OR_REG(&pciregs->sbtopci2, (SBTOPCI_PREF|SBTOPCI_BURST)); + + if (si->pcirev < 5) { + SET_SBREG(sbh, &sb->sbimconfiglow, SBIMCL_RTO_MASK | SBIMCL_STO_MASK, + (0x3 << SBIMCL_RTO_SHIFT) | 0x2); + sb_commit(sbh); + } + + /* switch back to previous core */ + sb_setcoreidx(sbh, idx); + + /* use large sb pci dma window */ + if (dmaoffset) + *dmaoffset = SB_PCI_DMA; +} + +uint32 +sb_base(uint32 admatch) +{ + uint32 base; + uint type; + + type = admatch & SBAM_TYPE_MASK; + ASSERT(type < 3); + + base = 0; + + if (type == 0) { + base = admatch & SBAM_BASE0_MASK; + } else if (type == 1) { + ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ + base = admatch & SBAM_BASE1_MASK; + } else if (type == 2) { + ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ + base = admatch & SBAM_BASE2_MASK; + } + + return (base); +} + +uint32 +sb_size(uint32 admatch) +{ + uint32 size; + uint type; + + type = admatch & SBAM_TYPE_MASK; + ASSERT(type < 3); + + size = 0; + + if (type == 0) { + size = 1 << (((admatch & SBAM_ADINT0_MASK) >> SBAM_ADINT0_SHIFT) + 1); + } else if (type == 1) { + ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ + size = 1 << (((admatch & SBAM_ADINT1_MASK) >> SBAM_ADINT1_SHIFT) + 1); + } else if (type == 2) { + ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */ + size = 1 << (((admatch & SBAM_ADINT2_MASK) >> SBAM_ADINT2_SHIFT) + 1); + } + + return (size); +} + +/* return the core-type instantiation # of the current core */ +uint +sb_coreunit(void *sbh) +{ + sb_info_t *si; + uint idx; + uint coreid; + uint coreunit; + uint i; + + si = SB_INFO(sbh); + coreunit = 0; + + idx = si->curidx; + + ASSERT(GOODREGS(si->curmap)); + coreid = sb_coreid(sbh); + + /* count the cores of our type */ + for (i = 0; i < idx; i++) + if (si->coreid[i] == coreid) + coreunit++; + + return (coreunit); +} + +static INLINE uint32 +factor6(uint32 x) +{ + switch (x) { + case CC_F6_2: return 2; + case CC_F6_3: return 3; + case CC_F6_4: return 4; + case CC_F6_5: return 5; + case CC_F6_6: return 6; + case CC_F6_7: return 7; + default: return 0; + } +} + +/* calculate the speed the SB would run at given a set of clockcontrol values */ +uint32 +sb_clock_rate(uint32 pll_type, uint32 n, uint32 m) +{ + uint32 n1, n2, clock, m1, m2, m3, mc; + + n1 = n & CN_N1_MASK; + n2 = (n & CN_N2_MASK) >> CN_N2_SHIFT; + + if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE4)) { + n1 = factor6(n1); + n2 += CC_F5_BIAS; + } else if (pll_type == PLL_TYPE2) { + n1 += CC_T2_BIAS; + n2 += CC_T2_BIAS; + ASSERT((n1 >= 2) && (n1 <= 7)); + ASSERT((n2 >= 5) && (n2 <= 23)); + } else if (pll_type == PLL_TYPE3) { + return (100000000); + } else + ASSERT((pll_type >= PLL_TYPE1) && (pll_type <= PLL_TYPE4)); + + clock = CC_CLOCK_BASE * n1 * n2; + + if (clock == 0) + return 0; + + m1 = m & CC_M1_MASK; + m2 = (m & CC_M2_MASK) >> CC_M2_SHIFT; + m3 = (m & CC_M3_MASK) >> CC_M3_SHIFT; + mc = (m & CC_MC_MASK) >> CC_MC_SHIFT; + + if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE4)) { + m1 = factor6(m1); + if (pll_type == PLL_TYPE1) + m2 += CC_F5_BIAS; + else + m2 = factor6(m2); + m3 = factor6(m3); + + switch (mc) { + case CC_MC_BYPASS: return (clock); + case CC_MC_M1: return (clock / m1); + case CC_MC_M1M2: return (clock / (m1 * m2)); + case CC_MC_M1M2M3: return (clock / (m1 * m2 * m3)); + case CC_MC_M1M3: return (clock / (m1 * m3)); + default: return (0); + } + } else { + ASSERT(pll_type == PLL_TYPE2); + + m1 += CC_T2_BIAS; + m2 += CC_T2M2_BIAS; + m3 += CC_T2_BIAS; + ASSERT((m1 >= 2) && (m1 <= 7)); + ASSERT((m2 >= 3) && (m2 <= 10)); + ASSERT((m3 >= 2) && (m3 <= 7)); + + if ((mc & CC_T2MC_M1BYP) == 0) + clock /= m1; + if ((mc & CC_T2MC_M2BYP) == 0) + clock /= m2; + if ((mc & CC_T2MC_M3BYP) == 0) + clock /= m3; + + return(clock); + } +} + +/* returns the current speed the SB is running at */ +uint32 +sb_clock(void *sbh) +{ + sb_info_t *si; + extifregs_t *eir; + chipcregs_t *cc; + uint32 n, m; + uint idx; + uint32 pll_type, rate; + uint intr_val = 0; + + si = SB_INFO(sbh); + idx = si->curidx; + pll_type = PLL_TYPE1; + + INTR_OFF(si, intr_val); + + /* switch to extif or chipc core */ + if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) { + n = R_REG(&eir->clockcontrol_n); + m = R_REG(&eir->clockcontrol_sb); + } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) { + pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK; + n = R_REG(&cc->clockcontrol_n); + m = R_REG(&cc->clockcontrol_sb); + } else { + INTR_RESTORE(si, intr_val); + return 0; + } + + /* calculate rate */ + rate = sb_clock_rate(pll_type, n, m); + + /* switch back to previous core */ + sb_setcoreidx(sbh, idx); + + INTR_RESTORE(si, intr_val); + + return rate; +} + +/* change logical "focus" to the gpio core for optimized access */ +void* +sb_gpiosetcore(void *sbh) +{ + sb_info_t *si; + + si = SB_INFO(sbh); + + return (sb_setcoreidx(sbh, si->gpioidx)); +} + +/* mask&set gpiocontrol bits */ +uint32 +sb_gpiocontrol(void *sbh, uint32 mask, uint32 val) +{ + sb_info_t *si; + uint regoff; + + si = SB_INFO(sbh); + regoff = 0; + + switch (si->gpioid) { + case SB_CC: + regoff = OFFSETOF(chipcregs_t, gpiocontrol); + break; + + case SB_PCI: + regoff = OFFSETOF(sbpciregs_t, gpiocontrol); + break; + + case SB_EXTIF: + return (0); + } + + return (sb_corereg(sbh, si->gpioidx, regoff, mask, val)); +} + +/* mask&set gpio output enable bits */ +uint32 +sb_gpioouten(void *sbh, uint32 mask, uint32 val) +{ + sb_info_t *si; + uint regoff; + + si = SB_INFO(sbh); + regoff = 0; + + switch (si->gpioid) { + case SB_CC: + regoff = OFFSETOF(chipcregs_t, gpioouten); + break; + + case SB_PCI: + regoff = OFFSETOF(sbpciregs_t, gpioouten); + break; + + case SB_EXTIF: + regoff = OFFSETOF(extifregs_t, gpio[0].outen); + break; + } + + return (sb_corereg(sbh, si->gpioidx, regoff, mask, val)); +} + +/* mask&set gpio output bits */ +uint32 +sb_gpioout(void *sbh, uint32 mask, uint32 val) +{ + sb_info_t *si; + uint regoff; + + si = SB_INFO(sbh); + regoff = 0; + + switch (si->gpioid) { + case SB_CC: + regoff = OFFSETOF(chipcregs_t, gpioout); + break; + + case SB_PCI: + regoff = OFFSETOF(sbpciregs_t, gpioout); + break; + + case SB_EXTIF: + regoff = OFFSETOF(extifregs_t, gpio[0].out); + break; + } + + return (sb_corereg(sbh, si->gpioidx, regoff, mask, val)); +} + +/* return the current gpioin register value */ +uint32 +sb_gpioin(void *sbh) +{ + sb_info_t *si; + uint regoff; + + si = SB_INFO(sbh); + regoff = 0; + + switch (si->gpioid) { + case SB_CC: + regoff = OFFSETOF(chipcregs_t, gpioin); + break; + + case SB_PCI: + regoff = OFFSETOF(sbpciregs_t, gpioin); + break; + + case SB_EXTIF: + regoff = OFFSETOF(extifregs_t, gpioin); + break; + } + + return (sb_corereg(sbh, si->gpioidx, regoff, 0, 0)); +} + +/* mask&set gpio interrupt polarity bits */ +uint32 +sb_gpiointpolarity(void *sbh, uint32 mask, uint32 val) +{ + sb_info_t *si; + uint regoff; + + si = SB_INFO(sbh); + regoff = 0; + + switch (si->gpioid) { + case SB_CC: + regoff = OFFSETOF(chipcregs_t, gpiointpolarity); + break; + + case SB_PCI: + /* pci gpio implementation does not support interrupt polarity */ + ASSERT(0); + break; + + case SB_EXTIF: + regoff = OFFSETOF(extifregs_t, gpiointpolarity); + break; + } + + return (sb_corereg(sbh, si->gpioidx, regoff, mask, val)); +} + +/* mask&set gpio interrupt mask bits */ +uint32 +sb_gpiointmask(void *sbh, uint32 mask, uint32 val) +{ + sb_info_t *si; + uint regoff; + + si = SB_INFO(sbh); + regoff = 0; + + switch (si->gpioid) { + case SB_CC: + regoff = OFFSETOF(chipcregs_t, gpiointmask); + break; + + case SB_PCI: + /* pci gpio implementation does not support interrupt mask */ + ASSERT(0); + break; + + case SB_EXTIF: + regoff = OFFSETOF(extifregs_t, gpiointmask); + break; + } + + return (sb_corereg(sbh, si->gpioidx, regoff, mask, val)); +} + + +/* + * Return the slow clock source. + * Three sources of SLOW CLOCK: LPO, Xtal, PCI + */ +static uint +sb_slowclk_src(void *sbh) +{ + sb_info_t *si; + chipcregs_t *cc; + uint32 v; + + si = SB_INFO(sbh); + + ASSERT(sb_coreid(sbh) == SB_CC); + + if (si->ccrev < 6) { + switch (si->bus) { + case PCMCIA_BUS: return (SCC_SS_XTAL); + case PCI_BUS: + v = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32)); + if (v & PCI_CFG_GPIO_SCS) + return (SCC_SS_PCI); + else + return (SCC_SS_XTAL); + default: return (SCC_SS_XTAL); + } + } else if (si->ccrev < 10) { + cc = (chipcregs_t*) sb_setcoreidx(sbh, si->curidx); + v = R_REG(&cc->slow_clk_ctl) & SCC_SS_MASK; + return (v); + } else { + return (SCC_SS_XTAL); + } +} + +/* + * Return the slowclock min or max frequency. + * Three sources of SLOW CLOCK: + * 1. On Chip LPO - 32khz or 160khz + * 2. On Chip Xtal OSC - 20mhz/4*(divider+1) + * 3. External PCI clock - 66mhz/4*(divider+1) + */ +static uint +sb_slowclk_freq(void *sbh, bool max) +{ + sb_info_t *si; + chipcregs_t *cc; + uint32 slowclk; + uint div; + + si = SB_INFO(sbh); + + ASSERT(sb_coreid(sbh) == SB_CC); + + cc = (chipcregs_t*) sb_setcoreidx(sbh, si->curidx); + + /* shouldn't be here unless we've established the chip has dynamic power control */ + ASSERT(R_REG(&cc->capabilities) & CAP_PWR_CTL); + + slowclk = sb_slowclk_src(sbh); + if (si->ccrev < 6) { + if (slowclk == SCC_SS_PCI) + return (max? (PCIMAXFREQ/64) : (PCIMINFREQ/64)); + else + return (max? (XTALMAXFREQ/32) : (XTALMINFREQ/32)); + } else if (si->ccrev < 10) { + div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHF) + 1); + if (slowclk == SCC_SS_LPO) + return (max? LPOMAXFREQ : LPOMINFREQ); + else if (slowclk == SCC_SS_XTAL) + return (max? (XTALMAXFREQ/div) : (XTALMINFREQ/div)); + else if (slowclk == SCC_SS_PCI) + return (max? (PCIMAXFREQ/div) : (PCIMINFREQ/div)); + else + ASSERT(0); + } else { + /* Chipc rev 10 is InstaClock */ + div = R_REG(&cc->system_clk_ctl) >> SYCC_CD_SHF; + div = 4 * (div + 1); + return (max ? XTALMAXFREQ : (XTALMINFREQ/div)); + } + return (0); +} + +static void +sb_pwrctl_setdelay(void *sbh, void *chipcregs) +{ + chipcregs_t * cc; + uint slowmaxfreq, pll_delay, slowclk; + uint pll_on_delay, fref_sel_delay; + + pll_delay = PLL_DELAY; + + /* If the slow clock is not sourced by the xtal then add the xtal_on_delay + * since the xtal will also be powered down by dynamic power control logic. + */ + slowclk = sb_slowclk_src(sbh); + if (slowclk != SCC_SS_XTAL) + pll_delay += XTAL_ON_DELAY; + + slowmaxfreq = sb_slowclk_freq(sbh, TRUE); + + pll_on_delay = ((slowmaxfreq * pll_delay) + 999999) / 1000000; + fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000; + + cc = (chipcregs_t *)chipcregs; + W_REG(&cc->pll_on_delay, pll_on_delay); + W_REG(&cc->fref_sel_delay, fref_sel_delay); +} + +/* set or get slow clock divider */ +int +sb_pwrctl_slowclk(void *sbh, bool set, uint *div) +{ + sb_info_t *si; + uint origidx; + chipcregs_t *cc; + uint intr_val = 0; + uint err = 0; + + si = SB_INFO(sbh); + + /* chipcommon cores prior to rev6 don't support slowclkcontrol */ + if (si->ccrev < 6) + return 1; + + /* chipcommon cores rev10 are a whole new ball game */ + if (si->ccrev >= 10) + return 1; + + if (set && ((*div % 4) || (*div < 4))) + return 2; + + INTR_OFF(si, intr_val); + origidx = si->curidx; + cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0); + ASSERT(cc != NULL); + + if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) { + err = 3; + goto done; + } + + if (set) { + SET_REG(&cc->slow_clk_ctl, SCC_CD_MASK, ((*div / 4 - 1) << SCC_CD_SHF)); + sb_pwrctl_setdelay(sbh, (void *)cc); + } else + *div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHF) + 1); + +done: + sb_setcoreidx(sbh, origidx); + INTR_RESTORE(si, intr_val); + return err; +} + +/* initialize power control delay registers */ +void +sb_pwrctl_init(void *sbh) +{ + sb_info_t *si; + uint origidx; + chipcregs_t *cc; + + si = SB_INFO(sbh); + + if (si->bus == SB_BUS) + return; + + origidx = si->curidx; + + if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL) + return; + + if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) + goto done; + + /* 4317pc does not work with SlowClock less than 5Mhz */ + if (si->bus == PCMCIA_BUS) { + if ((si->ccrev >= 6) && (si->ccrev < 10)) + SET_REG(&cc->slow_clk_ctl, SCC_CD_MASK, (SCC_DEF_DIV << SCC_CD_SHF)); + } + + sb_pwrctl_setdelay(sbh, (void *)cc); + +done: + sb_setcoreidx(sbh, origidx); +} + +/* return the value suitable for writing to the dot11 core FAST_PWRUP_DELAY register */ +uint16 +sb_pwrctl_fast_pwrup_delay(void *sbh) +{ + sb_info_t *si; + uint origidx; + chipcregs_t *cc; + uint slowminfreq; + uint16 fpdelay; + uint intr_val = 0; + + si = SB_INFO(sbh); + fpdelay = 0; + origidx = si->curidx; + + if (si->bus == SB_BUS) + goto done; + + INTR_OFF(si, intr_val); + + if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL) + goto done; + + if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) + goto done; + + slowminfreq = sb_slowclk_freq(sbh, FALSE); + fpdelay = (((R_REG(&cc->pll_on_delay) + 2) * 1000000) + (slowminfreq - 1)) / slowminfreq; + +done: + sb_setcoreidx(sbh, origidx); + INTR_RESTORE(si, intr_val); + return (fpdelay); +} + +/* turn primary xtal and/or pll off/on */ +int +sb_pwrctl_xtal(void *sbh, uint what, bool on) +{ + sb_info_t *si; + uint32 in, out, outen; + + si = SB_INFO(sbh); + + switch (si->bus) { + + + case PCMCIA_BUS: + return (0); + + + case PCI_BUS: + + in = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_IN, sizeof (uint32)); + out = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32)); + outen = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32)); + + /* + * We can't actually read the state of the PLLPD so we infer it + * by the value of XTAL_PU which *is* readable via gpioin. + */ + if (on && (in & PCI_CFG_GPIO_XTAL)) + return (0); + + if (what & XTAL) + outen |= PCI_CFG_GPIO_XTAL; + if (what & PLL) + outen |= PCI_CFG_GPIO_PLL; + + if (on) { + /* turn primary xtal on */ + if (what & XTAL) { + out |= PCI_CFG_GPIO_XTAL; + if (what & PLL) + out |= PCI_CFG_GPIO_PLL; + OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out); + OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen); + OSL_DELAY(XTAL_ON_DELAY); + } + + /* turn pll on */ + if (what & PLL) { + out &= ~PCI_CFG_GPIO_PLL; + OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out); + OSL_DELAY(2000); + } + } else { + if (what & XTAL) + out &= ~PCI_CFG_GPIO_XTAL; + if (what & PLL) + out |= PCI_CFG_GPIO_PLL; + OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out); + OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen); + } + + default: + return (-1); + } + + return (0); +} + +/* set dynamic power control mode (forceslow, forcefast, dynamic) */ +/* returns true if ignore pll off is set and false if it is not */ +bool +sb_pwrctl_clk(void *sbh, uint mode) +{ + sb_info_t *si; + uint origidx; + chipcregs_t *cc; + uint32 scc; + bool forcefastclk=FALSE; + uint intr_val = 0; + + si = SB_INFO(sbh); + + /* chipcommon cores prior to rev6 don't support slowclkcontrol */ + if (si->ccrev < 6) + return (FALSE); + + /* chipcommon cores rev10 are a whole new ball game */ + if (si->ccrev >= 10) + return (FALSE); + + INTR_OFF(si, intr_val); + + origidx = si->curidx; + + cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0); + ASSERT(cc != NULL); + + if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL)) + goto done; + + switch (mode) { + case CLK_FAST: /* force fast (pll) clock */ + /* don't forget to force xtal back on before we clear SCC_DYN_XTAL.. */ + sb_pwrctl_xtal(sbh, XTAL, ON); + + SET_REG(&cc->slow_clk_ctl, (SCC_XC | SCC_FS | SCC_IP), SCC_IP); + break; + + case CLK_SLOW: /* force slow clock */ + if ((si->bus == SDIO_BUS) || (si->bus == PCMCIA_BUS)) + return (-1); + + if (si->ccrev >= 6) + OR_REG(&cc->slow_clk_ctl, SCC_FS); + break; + + case CLK_DYNAMIC: /* enable dynamic power control */ + scc = R_REG(&cc->slow_clk_ctl); + scc &= ~(SCC_FS | SCC_IP | SCC_XC); + if ((scc & SCC_SS_MASK) != SCC_SS_XTAL) + scc |= SCC_XC; + W_REG(&cc->slow_clk_ctl, scc); + + /* for dynamic control, we have to release our xtal_pu "force on" */ + if (scc & SCC_XC) + sb_pwrctl_xtal(sbh, XTAL, OFF); + break; + } + + /* Is the h/w forcing the use of the fast clk */ + forcefastclk = (bool)((R_REG(&cc->slow_clk_ctl) & SCC_IP) == SCC_IP); + +done: + sb_setcoreidx(sbh, origidx); + INTR_RESTORE(si, intr_val); + return (forcefastclk); +} + +/* register driver interrupt disabling and restoring callback functions */ +void +sb_register_intr_callback(void *sbh, void *intrsoff_fn, void *intrsrestore_fn, void *intrsenabled_fn, void *intr_arg) +{ + sb_info_t *si; + + si = SB_INFO(sbh); + si->intr_arg = intr_arg; + si->intrsoff_fn = (sb_intrsoff_t)intrsoff_fn; + si->intrsrestore_fn = (sb_intrsrestore_t)intrsrestore_fn; + si->intrsenabled_fn = (sb_intrsenabled_t)intrsenabled_fn; + /* save current core id. when this function called, the current core + * must be the core which provides driver functions(il, et, wl, etc.) + */ + si->dev_coreid = si->coreid[si->curidx]; +} + + diff --git a/package/linux/kernel-source/drivers/net/hnd/shared_ksyms.sh b/package/linux/kernel-source/drivers/net/hnd/shared_ksyms.sh new file mode 100644 index 000000000..0187d47ea --- /dev/null +++ b/package/linux/kernel-source/drivers/net/hnd/shared_ksyms.sh @@ -0,0 +1,21 @@ +#!/bin/sh +# +# Copyright 2004, Broadcom Corporation +# All Rights Reserved. +# +# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY +# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM +# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS +# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. +# +# $Id$ +# + +cat <<EOF +#include <linux/config.h> +#include <linux/module.h> +EOF + +for file in $* ; do + ${NM} $file | sed -ne 's/[0-9A-Fa-f]* [DT] \([^ ]*\)/extern void \1; EXPORT_SYMBOL(\1);/p' +done diff --git a/package/linux/kernel-source/drivers/net/wl/Makefile b/package/linux/kernel-source/drivers/net/wl/Makefile new file mode 100644 index 000000000..8f6056eb5 --- /dev/null +++ b/package/linux/kernel-source/drivers/net/wl/Makefile @@ -0,0 +1,59 @@ +# +# Makefile for the Broadcom wl driver +# +# Copyright 2004, Broadcom Corporation +# All Rights Reserved. +# +# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY +# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM +# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS +# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. +# +# $Id$ +# + +O_TARGET := wl.o + +WL_OBJS := wl_linux.o wlc.o d11ucode.o wlc_phy.o wlc_rate.o wlc_led.o wlc_security.o rc4.o tkhash.o bcmwpa.o + +INSUP_OBJS := aes.o aeskeywrap.o hmac.o md5.o passhash.o prf.o rijndael-alg-fst.o sha1.o + +# Alternate ioctl interfaces +ifeq ($(CONFIG_NET_WIRELESS),y) +WL_OBJS += wlc_cmn_ioctl.o +endif +ifeq ($(CONFIG_WL_OID),y) +WL_OBJS += wl_oid.o +endif + +ifeq ($(CONFIG_WL_STA),y) +WL_OBJS += $(INSUP_OBJS) +endif + +# Prefix driver variants +WL_APOBJS := $(foreach obj,$(WL_OBJS),ap_$(obj)) +WL_STAOBJS := $(foreach obj,$(WL_OBJS) wlc_sup.o,sta_$(obj)) +WL_APSTAOBJS := $(foreach obj,$(WL_OBJS) wlc_sup.o,apsta_$(obj)) +ifneq ($(CONFIG_WL_STA),y) +WL_APSTAOBJS += $(foreach obj,$(INSUP_OBJS), apsta_$(obj)) +endif + +# Either or both +ifeq ($(CONFIG_WL_AP),y) +AP := AP +endif +ifeq ($(CONFIG_WL_STA),y) +STA := STA +endif + +# Build all variants as modules but link only one of them +export-objs := +obj-y := $(WL_$(AP)$(STA)OBJS) +obj-m := $(O_TARGET) +variant-objs := $(WL_APOBJS) $(WL_STAOBJS) $(WL_APSTAOBJS) + +EXTRA_CFLAGS += -DDMA + +include $(TOPDIR)/Rules.make + + diff --git a/package/linux/kernel-source/drivers/pcmcia/bcm4710_generic.c b/package/linux/kernel-source/drivers/pcmcia/bcm4710_generic.c new file mode 100644 index 000000000..18eba4679 --- /dev/null +++ b/package/linux/kernel-source/drivers/pcmcia/bcm4710_generic.c @@ -0,0 +1,912 @@ +/* + * + * bcm47xx pcmcia driver + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * Based on sa1100_generic.c from www.handhelds.org, + * and au1000_generic.c from oss.sgi.com. + * + * $Id$ + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/config.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/tqueue.h> +#include <linux/timer.h> +#include <linux/mm.h> +#include <linux/proc_fs.h> +#include <linux/version.h> +#include <linux/types.h> +#include <linux/vmalloc.h> + +#include <pcmcia/version.h> +#include <pcmcia/cs_types.h> +#include <pcmcia/cs.h> +#include <pcmcia/ss.h> +#include <pcmcia/bulkmem.h> +#include <pcmcia/cistpl.h> +#include <pcmcia/bus_ops.h> +#include "cs_internal.h" + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/system.h> + +#include <typedefs.h> +#include <bcm4710.h> +#include <sbextif.h> + +#include "bcm4710pcmcia.h" + +#ifdef PCMCIA_DEBUG +static int pc_debug = PCMCIA_DEBUG; +#endif + +MODULE_DESCRIPTION("Linux PCMCIA Card Services: bcm47xx Socket Controller"); + +/* This structure maintains housekeeping state for each socket, such + * as the last known values of the card detect pins, or the Card Services + * callback value associated with the socket: + */ +static struct bcm47xx_pcmcia_socket *pcmcia_socket; +static int socket_count; + + +/* Returned by the low-level PCMCIA interface: */ +static struct pcmcia_low_level *pcmcia_low_level; + +/* Event poll timer structure */ +static struct timer_list poll_timer; + + +/* Prototypes for routines which are used internally: */ + +static int bcm47xx_pcmcia_driver_init(void); +static void bcm47xx_pcmcia_driver_shutdown(void); +static void bcm47xx_pcmcia_task_handler(void *data); +static void bcm47xx_pcmcia_poll_event(unsigned long data); +static void bcm47xx_pcmcia_interrupt(int irq, void *dev, struct pt_regs *regs); +static struct tq_struct bcm47xx_pcmcia_task; + +#ifdef CONFIG_PROC_FS +static int bcm47xx_pcmcia_proc_status(char *buf, char **start, + off_t pos, int count, int *eof, void *data); +#endif + + +/* Prototypes for operations which are exported to the + * in-kernel PCMCIA core: + */ + +static int bcm47xx_pcmcia_init(unsigned int sock); +static int bcm47xx_pcmcia_suspend(unsigned int sock); +static int bcm47xx_pcmcia_register_callback(unsigned int sock, + void (*handler)(void *, unsigned int), void *info); +static int bcm47xx_pcmcia_inquire_socket(unsigned int sock, socket_cap_t *cap); +static int bcm47xx_pcmcia_get_status(unsigned int sock, u_int *value); +static int bcm47xx_pcmcia_get_socket(unsigned int sock, socket_state_t *state); +static int bcm47xx_pcmcia_set_socket(unsigned int sock, socket_state_t *state); +static int bcm47xx_pcmcia_get_io_map(unsigned int sock, struct pccard_io_map *io); +static int bcm47xx_pcmcia_set_io_map(unsigned int sock, struct pccard_io_map *io); +static int bcm47xx_pcmcia_get_mem_map(unsigned int sock, struct pccard_mem_map *mem); +static int bcm47xx_pcmcia_set_mem_map(unsigned int sock, struct pccard_mem_map *mem); +#ifdef CONFIG_PROC_FS +static void bcm47xx_pcmcia_proc_setup(unsigned int sock, struct proc_dir_entry *base); +#endif + +static struct pccard_operations bcm47xx_pcmcia_operations = { + bcm47xx_pcmcia_init, + bcm47xx_pcmcia_suspend, + bcm47xx_pcmcia_register_callback, + bcm47xx_pcmcia_inquire_socket, + bcm47xx_pcmcia_get_status, + bcm47xx_pcmcia_get_socket, + bcm47xx_pcmcia_set_socket, + bcm47xx_pcmcia_get_io_map, + bcm47xx_pcmcia_set_io_map, + bcm47xx_pcmcia_get_mem_map, + bcm47xx_pcmcia_set_mem_map, +#ifdef CONFIG_PROC_FS + bcm47xx_pcmcia_proc_setup +#endif +}; + + +/* + * bcm47xx_pcmcia_driver_init() + * + * This routine performs a basic sanity check to ensure that this + * kernel has been built with the appropriate board-specific low-level + * PCMCIA support, performs low-level PCMCIA initialization, registers + * this socket driver with Card Services, and then spawns the daemon + * thread which is the real workhorse of the socket driver. + * + * Please see linux/Documentation/arm/SA1100/PCMCIA for more information + * on the low-level kernel interface. + * + * Returns: 0 on success, -1 on error + */ +static int __init bcm47xx_pcmcia_driver_init(void) +{ + servinfo_t info; + struct pcmcia_init pcmcia_init; + struct pcmcia_state state; + unsigned int i; + unsigned long tmp; + + + printk("\nBCM47XX PCMCIA (CS release %s)\n", CS_RELEASE); + + CardServices(GetCardServicesInfo, &info); + + if (info.Revision != CS_RELEASE_CODE) { + printk(KERN_ERR "Card Services release codes do not match\n"); + return -1; + } + +#ifdef CONFIG_BCM4710 + pcmcia_low_level=&bcm4710_pcmcia_ops; +#else +#error Unsupported Broadcom BCM47XX board. +#endif + + pcmcia_init.handler=bcm47xx_pcmcia_interrupt; + + if ((socket_count = pcmcia_low_level->init(&pcmcia_init)) < 0) { + printk(KERN_ERR "Unable to initialize PCMCIA service.\n"); + return -EIO; + } else { + printk("\t%d PCMCIA sockets initialized.\n", socket_count); + } + + pcmcia_socket = + kmalloc(sizeof(struct bcm47xx_pcmcia_socket) * socket_count, + GFP_KERNEL); + memset(pcmcia_socket, 0, + sizeof(struct bcm47xx_pcmcia_socket) * socket_count); + if (!pcmcia_socket) { + printk(KERN_ERR "Card Services can't get memory \n"); + return -1; + } + + for (i = 0; i < socket_count; i++) { + if (pcmcia_low_level->socket_state(i, &state) < 0) { + printk(KERN_ERR "Unable to get PCMCIA status\n"); + return -EIO; + } + pcmcia_socket[i].k_state = state; + pcmcia_socket[i].cs_state.csc_mask = SS_DETECT; + + if (i == 0) { + pcmcia_socket[i].virt_io = + (unsigned long)ioremap_nocache(EXTIF_PCMCIA_IOBASE(BCM4710_EXTIF), 0x1000); + /* Substract ioport base which gets added by in/out */ + pcmcia_socket[i].virt_io -= mips_io_port_base; + pcmcia_socket[i].phys_attr = + (unsigned long)EXTIF_PCMCIA_CFGBASE(BCM4710_EXTIF); + pcmcia_socket[i].phys_mem = + (unsigned long)EXTIF_PCMCIA_MEMBASE(BCM4710_EXTIF); + } else { + printk(KERN_ERR "bcm4710: socket 1 not supported\n"); + return 1; + } + } + + /* Only advertise as many sockets as we can detect: */ + if (register_ss_entry(socket_count, &bcm47xx_pcmcia_operations) < 0) { + printk(KERN_ERR "Unable to register socket service routine\n"); + return -ENXIO; + } + + /* Start the event poll timer. + * It will reschedule by itself afterwards. + */ + bcm47xx_pcmcia_poll_event(0); + + DEBUG(1, "bcm4710: initialization complete\n"); + return 0; + +} + +module_init(bcm47xx_pcmcia_driver_init); + + +/* + * bcm47xx_pcmcia_driver_shutdown() + * + * Invokes the low-level kernel service to free IRQs associated with this + * socket controller and reset GPIO edge detection. + */ +static void __exit bcm47xx_pcmcia_driver_shutdown(void) +{ + int i; + + del_timer_sync(&poll_timer); + unregister_ss_entry(&bcm47xx_pcmcia_operations); + pcmcia_low_level->shutdown(); + flush_scheduled_tasks(); + for (i = 0; i < socket_count; i++) { + if (pcmcia_socket[i].virt_io) + iounmap((void *)pcmcia_socket[i].virt_io); + if (pcmcia_socket[i].phys_attr) + iounmap((void *)pcmcia_socket[i].phys_attr); + if (pcmcia_socket[i].phys_mem) + iounmap((void *)pcmcia_socket[i].phys_mem); + } + DEBUG(1, "bcm4710: shutdown complete\n"); +} + +module_exit(bcm47xx_pcmcia_driver_shutdown); + +/* + * bcm47xx_pcmcia_init() + * We perform all of the interesting initialization tasks in + * bcm47xx_pcmcia_driver_init(). + * + * Returns: 0 + */ +static int bcm47xx_pcmcia_init(unsigned int sock) +{ + DEBUG(1, "%s(): initializing socket %u\n", __FUNCTION__, sock); + + return 0; +} + +/* + * bcm47xx_pcmcia_suspend() + * + * We don't currently perform any actions on a suspend. + * + * Returns: 0 + */ +static int bcm47xx_pcmcia_suspend(unsigned int sock) +{ + DEBUG(1, "%s(): suspending socket %u\n", __FUNCTION__, sock); + + return 0; +} + + +/* + * bcm47xx_pcmcia_events() + * + * Helper routine to generate a Card Services event mask based on + * state information obtained from the kernel low-level PCMCIA layer + * in a recent (and previous) sampling. Updates `prev_state'. + * + * Returns: an event mask for the given socket state. + */ +static inline unsigned +bcm47xx_pcmcia_events(struct pcmcia_state *state, + struct pcmcia_state *prev_state, + unsigned int mask, unsigned int flags) +{ + unsigned int events=0; + + if (state->bvd1 != prev_state->bvd1) { + + DEBUG(3, "%s(): card BVD1 value %u\n", __FUNCTION__, state->bvd1); + + events |= mask & (flags & SS_IOCARD) ? SS_STSCHG : SS_BATDEAD; + } + + if (state->bvd2 != prev_state->bvd2) { + + DEBUG(3, "%s(): card BVD2 value %u\n", __FUNCTION__, state->bvd2); + + events |= mask & (flags & SS_IOCARD) ? 0 : SS_BATWARN; + } + + if (state->detect != prev_state->detect) { + + DEBUG(3, "%s(): card detect value %u\n", __FUNCTION__, state->detect); + + events |= mask & SS_DETECT; + } + + + if (state->ready != prev_state->ready) { + + DEBUG(3, "%s(): card ready value %u\n", __FUNCTION__, state->ready); + + events |= mask & ((flags & SS_IOCARD) ? 0 : SS_READY); + } + + if (events != 0) { + DEBUG(2, "events: %s%s%s%s%s\n", + (events & SS_DETECT) ? "DETECT " : "", + (events & SS_READY) ? "READY " : "", + (events & SS_BATDEAD) ? "BATDEAD " : "", + (events & SS_BATWARN) ? "BATWARN " : "", + (events & SS_STSCHG) ? "STSCHG " : ""); + } + + *prev_state=*state; + return events; +} + + +/* + * bcm47xx_pcmcia_task_handler() + * + * Processes serviceable socket events using the "eventd" thread context. + * + * Event processing (specifically, the invocation of the Card Services event + * callback) occurs in this thread rather than in the actual interrupt + * handler due to the use of scheduling operations in the PCMCIA core. + */ +static void bcm47xx_pcmcia_task_handler(void *data) +{ + struct pcmcia_state state; + int i, events, irq_status; + + DEBUG(4, "%s(): entering PCMCIA monitoring thread\n", __FUNCTION__); + + for (i = 0; i < socket_count; i++) { + if ((irq_status = pcmcia_low_level->socket_state(i, &state)) < 0) + printk(KERN_ERR "Error in kernel low-level PCMCIA service.\n"); + + events = bcm47xx_pcmcia_events(&state, + &pcmcia_socket[i].k_state, + pcmcia_socket[i].cs_state.csc_mask, + pcmcia_socket[i].cs_state.flags); + + if (pcmcia_socket[i].handler != NULL) { + pcmcia_socket[i].handler(pcmcia_socket[i].handler_info, + events); + } + } +} + +static struct tq_struct bcm47xx_pcmcia_task = { + routine: bcm47xx_pcmcia_task_handler +}; + + +/* + * bcm47xx_pcmcia_poll_event() + * + * Let's poll for events in addition to IRQs since IRQ only is unreliable... + */ +static void bcm47xx_pcmcia_poll_event(unsigned long dummy) +{ + DEBUG(4, "%s(): polling for events\n", __FUNCTION__); + + poll_timer.function = bcm47xx_pcmcia_poll_event; + poll_timer.expires = jiffies + BCM47XX_PCMCIA_POLL_PERIOD; + add_timer(&poll_timer); + schedule_task(&bcm47xx_pcmcia_task); +} + + +/* + * bcm47xx_pcmcia_interrupt() + * + * Service routine for socket driver interrupts (requested by the + * low-level PCMCIA init() operation via bcm47xx_pcmcia_thread()). + * + * The actual interrupt-servicing work is performed by + * bcm47xx_pcmcia_task(), largely because the Card Services event- + * handling code performs scheduling operations which cannot be + * executed from within an interrupt context. + */ +static void +bcm47xx_pcmcia_interrupt(int irq, void *dev, struct pt_regs *regs) +{ + DEBUG(3, "%s(): servicing IRQ %d\n", __FUNCTION__, irq); + schedule_task(&bcm47xx_pcmcia_task); +} + + +/* + * bcm47xx_pcmcia_register_callback() + * + * Implements the register_callback() operation for the in-kernel + * PCMCIA service (formerly SS_RegisterCallback in Card Services). If + * the function pointer `handler' is not NULL, remember the callback + * location in the state for `sock', and increment the usage counter + * for the driver module. (The callback is invoked from the interrupt + * service routine, bcm47xx_pcmcia_interrupt(), to notify Card Services + * of interesting events.) Otherwise, clear the callback pointer in the + * socket state and decrement the module usage count. + * + * Returns: 0 + */ +static int +bcm47xx_pcmcia_register_callback(unsigned int sock, + void (*handler)(void *, unsigned int), void *info) +{ + if (handler == NULL) { + pcmcia_socket[sock].handler = NULL; + MOD_DEC_USE_COUNT; + } else { + MOD_INC_USE_COUNT; + pcmcia_socket[sock].handler = handler; + pcmcia_socket[sock].handler_info = info; + } + return 0; +} + + +/* + * bcm47xx_pcmcia_inquire_socket() + * + * Implements the inquire_socket() operation for the in-kernel PCMCIA + * service (formerly SS_InquireSocket in Card Services). Of note is + * the setting of the SS_CAP_PAGE_REGS bit in the `features' field of + * `cap' to "trick" Card Services into tolerating large "I/O memory" + * addresses. Also set is SS_CAP_STATIC_MAP, which disables the memory + * resource database check. (Mapped memory is set up within the socket + * driver itself.) + * + * In conjunction with the STATIC_MAP capability is a new field, + * `io_offset', recommended by David Hinds. Rather than go through + * the SetIOMap interface (which is not quite suited for communicating + * window locations up from the socket driver), we just pass up + * an offset which is applied to client-requested base I/O addresses + * in alloc_io_space(). + * + * Returns: 0 on success, -1 if no pin has been configured for `sock' + */ +static int +bcm47xx_pcmcia_inquire_socket(unsigned int sock, socket_cap_t *cap) +{ + struct pcmcia_irq_info irq_info; + + if (sock >= socket_count) { + printk(KERN_ERR "bcm47xx: socket %u not configured\n", sock); + return -1; + } + + /* SS_CAP_PAGE_REGS: used by setup_cis_mem() in cistpl.c to set the + * force_low argument to validate_mem() in rsrc_mgr.c -- since in + * general, the mapped * addresses of the PCMCIA memory regions + * will not be within 0xffff, setting force_low would be + * undesirable. + * + * SS_CAP_STATIC_MAP: don't bother with the (user-configured) memory + * resource database; we instead pass up physical address ranges + * and allow other parts of Card Services to deal with remapping. + * + * SS_CAP_PCCARD: we can deal with 16-bit PCMCIA & CF cards, but + * not 32-bit CardBus devices. + */ + cap->features = (SS_CAP_PAGE_REGS | SS_CAP_STATIC_MAP | SS_CAP_PCCARD); + + irq_info.sock = sock; + irq_info.irq = -1; + + if (pcmcia_low_level->get_irq_info(&irq_info) < 0) { + printk(KERN_ERR "Error obtaining IRQ info socket %u\n", sock); + return -1; + } + + cap->irq_mask = 0; + cap->map_size = PAGE_SIZE; + cap->pci_irq = irq_info.irq; + cap->io_offset = pcmcia_socket[sock].virt_io; + + return 0; +} + + +/* + * bcm47xx_pcmcia_get_status() + * + * Implements the get_status() operation for the in-kernel PCMCIA + * service (formerly SS_GetStatus in Card Services). Essentially just + * fills in bits in `status' according to internal driver state or + * the value of the voltage detect chipselect register. + * + * As a debugging note, during card startup, the PCMCIA core issues + * three set_socket() commands in a row the first with RESET deasserted, + * the second with RESET asserted, and the last with RESET deasserted + * again. Following the third set_socket(), a get_status() command will + * be issued. The kernel is looking for the SS_READY flag (see + * setup_socket(), reset_socket(), and unreset_socket() in cs.c). + * + * Returns: 0 + */ +static int +bcm47xx_pcmcia_get_status(unsigned int sock, unsigned int *status) +{ + struct pcmcia_state state; + + + if ((pcmcia_low_level->socket_state(sock, &state)) < 0) { + printk(KERN_ERR "Unable to get PCMCIA status from kernel.\n"); + return -1; + } + + pcmcia_socket[sock].k_state = state; + + *status = state.detect ? SS_DETECT : 0; + + *status |= state.ready ? SS_READY : 0; + + /* The power status of individual sockets is not available + * explicitly from the hardware, so we just remember the state + * and regurgitate it upon request: + */ + *status |= pcmcia_socket[sock].cs_state.Vcc ? SS_POWERON : 0; + + if (pcmcia_socket[sock].cs_state.flags & SS_IOCARD) + *status |= state.bvd1 ? SS_STSCHG : 0; + else { + if (state.bvd1 == 0) + *status |= SS_BATDEAD; + else if (state.bvd2 == 0) + *status |= SS_BATWARN; + } + + *status |= state.vs_3v ? SS_3VCARD : 0; + + *status |= state.vs_Xv ? SS_XVCARD : 0; + + DEBUG(2, "\tstatus: %s%s%s%s%s%s%s%s\n", + (*status&SS_DETECT)?"DETECT ":"", + (*status&SS_READY)?"READY ":"", + (*status&SS_BATDEAD)?"BATDEAD ":"", + (*status&SS_BATWARN)?"BATWARN ":"", + (*status&SS_POWERON)?"POWERON ":"", + (*status&SS_STSCHG)?"STSCHG ":"", + (*status&SS_3VCARD)?"3VCARD ":"", + (*status&SS_XVCARD)?"XVCARD ":""); + + return 0; +} + + +/* + * bcm47xx_pcmcia_get_socket() + * + * Implements the get_socket() operation for the in-kernel PCMCIA + * service (formerly SS_GetSocket in Card Services). Not a very + * exciting routine. + * + * Returns: 0 + */ +static int +bcm47xx_pcmcia_get_socket(unsigned int sock, socket_state_t *state) +{ + DEBUG(2, "%s() for sock %u\n", __FUNCTION__, sock); + + /* This information was given to us in an earlier call to set_socket(), + * so we're just regurgitating it here: + */ + *state = pcmcia_socket[sock].cs_state; + return 0; +} + + +/* + * bcm47xx_pcmcia_set_socket() + * + * Implements the set_socket() operation for the in-kernel PCMCIA + * service (formerly SS_SetSocket in Card Services). We more or + * less punt all of this work and let the kernel handle the details + * of power configuration, reset, &c. We also record the value of + * `state' in order to regurgitate it to the PCMCIA core later. + * + * Returns: 0 + */ +static int +bcm47xx_pcmcia_set_socket(unsigned int sock, socket_state_t *state) +{ + struct pcmcia_configure configure; + + DEBUG(2, "\tmask: %s%s%s%s%s%s\n\tflags: %s%s%s%s%s%s\n" + "\tVcc %d Vpp %d irq %d\n", + (state->csc_mask == 0) ? "<NONE>" : "", + (state->csc_mask & SS_DETECT) ? "DETECT " : "", + (state->csc_mask & SS_READY) ? "READY " : "", + (state->csc_mask & SS_BATDEAD) ? "BATDEAD " : "", + (state->csc_mask & SS_BATWARN) ? "BATWARN " : "", + (state->csc_mask & SS_STSCHG) ? "STSCHG " : "", + (state->flags == 0) ? "<NONE>" : "", + (state->flags & SS_PWR_AUTO) ? "PWR_AUTO " : "", + (state->flags & SS_IOCARD) ? "IOCARD " : "", + (state->flags & SS_RESET) ? "RESET " : "", + (state->flags & SS_SPKR_ENA) ? "SPKR_ENA " : "", + (state->flags & SS_OUTPUT_ENA) ? "OUTPUT_ENA " : "", + state->Vcc, state->Vpp, state->io_irq); + + configure.sock = sock; + configure.vcc = state->Vcc; + configure.vpp = state->Vpp; + configure.output = (state->flags & SS_OUTPUT_ENA) ? 1 : 0; + configure.speaker = (state->flags & SS_SPKR_ENA) ? 1 : 0; + configure.reset = (state->flags & SS_RESET) ? 1 : 0; + + if (pcmcia_low_level->configure_socket(&configure) < 0) { + printk(KERN_ERR "Unable to configure socket %u\n", sock); + return -1; + } + + pcmcia_socket[sock].cs_state = *state; + return 0; +} + + +/* + * bcm47xx_pcmcia_get_io_map() + * + * Implements the get_io_map() operation for the in-kernel PCMCIA + * service (formerly SS_GetIOMap in Card Services). Just returns an + * I/O map descriptor which was assigned earlier by a set_io_map(). + * + * Returns: 0 on success, -1 if the map index was out of range + */ +static int +bcm47xx_pcmcia_get_io_map(unsigned int sock, struct pccard_io_map *map) +{ + DEBUG(2, "bcm47xx_pcmcia_get_io_map: sock %d\n", sock); + + if (map->map >= MAX_IO_WIN) { + printk(KERN_ERR "%s(): map (%d) out of range\n", + __FUNCTION__, map->map); + return -1; + } + + *map = pcmcia_socket[sock].io_map[map->map]; + return 0; +} + + +/* + * bcm47xx_pcmcia_set_io_map() + * + * Implements the set_io_map() operation for the in-kernel PCMCIA + * service (formerly SS_SetIOMap in Card Services). We configure + * the map speed as requested, but override the address ranges + * supplied by Card Services. + * + * Returns: 0 on success, -1 on error + */ +int +bcm47xx_pcmcia_set_io_map(unsigned int sock, struct pccard_io_map *map) +{ + unsigned int speed; + unsigned long start; + + DEBUG(2, "\tmap %u speed %u\n\tstart 0x%08lx stop 0x%08lx\n" + "\tflags: %s%s%s%s%s%s%s%s\n", + map->map, map->speed, map->start, map->stop, + (map->flags == 0) ? "<NONE>" : "", + (map->flags & MAP_ACTIVE) ? "ACTIVE " : "", + (map->flags & MAP_16BIT) ? "16BIT " : "", + (map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "", + (map->flags & MAP_0WS) ? "0WS " : "", + (map->flags & MAP_WRPROT) ? "WRPROT " : "", + (map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "", + (map->flags & MAP_PREFETCH) ? "PREFETCH " : ""); + + if (map->map >= MAX_IO_WIN) { + printk(KERN_ERR "%s(): map (%d) out of range\n", + __FUNCTION__, map->map); + return -1; + } + + if (map->flags & MAP_ACTIVE) { + speed = (map->speed > 0) ? map->speed : BCM47XX_PCMCIA_IO_SPEED; + pcmcia_socket[sock].speed_io = speed; + } + + start = map->start; + + if (map->stop == 1) { + map->stop = PAGE_SIZE - 1; + } + + map->start = pcmcia_socket[sock].virt_io; + map->stop = map->start + (map->stop - start); + pcmcia_socket[sock].io_map[map->map] = *map; + DEBUG(2, "set_io_map %d start %x stop %x\n", + map->map, map->start, map->stop); + return 0; +} + + +/* + * bcm47xx_pcmcia_get_mem_map() + * + * Implements the get_mem_map() operation for the in-kernel PCMCIA + * service (formerly SS_GetMemMap in Card Services). Just returns a + * memory map descriptor which was assigned earlier by a + * set_mem_map() request. + * + * Returns: 0 on success, -1 if the map index was out of range + */ +static int +bcm47xx_pcmcia_get_mem_map(unsigned int sock, struct pccard_mem_map *map) +{ + DEBUG(2, "%s() for sock %u\n", __FUNCTION__, sock); + + if (map->map >= MAX_WIN) { + printk(KERN_ERR "%s(): map (%d) out of range\n", + __FUNCTION__, map->map); + return -1; + } + + *map = pcmcia_socket[sock].mem_map[map->map]; + return 0; +} + + +/* + * bcm47xx_pcmcia_set_mem_map() + * + * Implements the set_mem_map() operation for the in-kernel PCMCIA + * service (formerly SS_SetMemMap in Card Services). We configure + * the map speed as requested, but override the address ranges + * supplied by Card Services. + * + * Returns: 0 on success, -1 on error + */ +static int +bcm47xx_pcmcia_set_mem_map(unsigned int sock, struct pccard_mem_map *map) +{ + unsigned int speed; + unsigned long start; + u_long flags; + + if (map->map >= MAX_WIN) { + printk(KERN_ERR "%s(): map (%d) out of range\n", + __FUNCTION__, map->map); + return -1; + } + + DEBUG(2, "\tmap %u speed %u\n\tsys_start %#lx\n" + "\tsys_stop %#lx\n\tcard_start %#x\n" + "\tflags: %s%s%s%s%s%s%s%s\n", + map->map, map->speed, map->sys_start, map->sys_stop, + map->card_start, (map->flags == 0) ? "<NONE>" : "", + (map->flags & MAP_ACTIVE) ? "ACTIVE " : "", + (map->flags & MAP_16BIT) ? "16BIT " : "", + (map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "", + (map->flags & MAP_0WS) ? "0WS " : "", + (map->flags & MAP_WRPROT) ? "WRPROT " : "", + (map->flags & MAP_ATTRIB) ? "ATTRIB " : "", + (map->flags & MAP_USE_WAIT) ? "USE_WAIT " : ""); + + if (map->flags & MAP_ACTIVE) { + /* When clients issue RequestMap, the access speed is not always + * properly configured: + */ + speed = (map->speed > 0) ? map->speed : BCM47XX_PCMCIA_MEM_SPEED; + + /* TBD */ + if (map->flags & MAP_ATTRIB) { + pcmcia_socket[sock].speed_attr = speed; + } else { + pcmcia_socket[sock].speed_mem = speed; + } + } + + save_flags(flags); + cli(); + start = map->sys_start; + + if (map->sys_stop == 0) + map->sys_stop = PAGE_SIZE - 1; + + if (map->flags & MAP_ATTRIB) { + map->sys_start = pcmcia_socket[sock].phys_attr + + map->card_start; + } else { + map->sys_start = pcmcia_socket[sock].phys_mem + + map->card_start; + } + + map->sys_stop = map->sys_start + (map->sys_stop - start); + pcmcia_socket[sock].mem_map[map->map] = *map; + restore_flags(flags); + DEBUG(2, "set_mem_map %d start %x stop %x card_start %x\n", + map->map, map->sys_start, map->sys_stop, + map->card_start); + return 0; +} + + +#if defined(CONFIG_PROC_FS) + +/* + * bcm47xx_pcmcia_proc_setup() + * + * Implements the proc_setup() operation for the in-kernel PCMCIA + * service (formerly SS_ProcSetup in Card Services). + * + * Returns: 0 on success, -1 on error + */ +static void +bcm47xx_pcmcia_proc_setup(unsigned int sock, struct proc_dir_entry *base) +{ + struct proc_dir_entry *entry; + + if ((entry = create_proc_entry("status", 0, base)) == NULL) { + printk(KERN_ERR "Unable to install \"status\" procfs entry\n"); + return; + } + + entry->read_proc = bcm47xx_pcmcia_proc_status; + entry->data = (void *)sock; +} + + +/* + * bcm47xx_pcmcia_proc_status() + * + * Implements the /proc/bus/pccard/??/status file. + * + * Returns: the number of characters added to the buffer + */ +static int +bcm47xx_pcmcia_proc_status(char *buf, char **start, off_t pos, + int count, int *eof, void *data) +{ + char *p = buf; + unsigned int sock = (unsigned int)data; + + p += sprintf(p, "k_flags : %s%s%s%s%s%s%s\n", + pcmcia_socket[sock].k_state.detect ? "detect " : "", + pcmcia_socket[sock].k_state.ready ? "ready " : "", + pcmcia_socket[sock].k_state.bvd1 ? "bvd1 " : "", + pcmcia_socket[sock].k_state.bvd2 ? "bvd2 " : "", + pcmcia_socket[sock].k_state.wrprot ? "wrprot " : "", + pcmcia_socket[sock].k_state.vs_3v ? "vs_3v " : "", + pcmcia_socket[sock].k_state.vs_Xv ? "vs_Xv " : ""); + + p += sprintf(p, "status : %s%s%s%s%s%s%s%s%s\n", + pcmcia_socket[sock].k_state.detect ? "SS_DETECT " : "", + pcmcia_socket[sock].k_state.ready ? "SS_READY " : "", + pcmcia_socket[sock].cs_state.Vcc ? "SS_POWERON " : "", + pcmcia_socket[sock].cs_state.flags & SS_IOCARD ? "SS_IOCARD " : "", + (pcmcia_socket[sock].cs_state.flags & SS_IOCARD && + pcmcia_socket[sock].k_state.bvd1) ? "SS_STSCHG " : "", + ((pcmcia_socket[sock].cs_state.flags & SS_IOCARD) == 0 && + (pcmcia_socket[sock].k_state.bvd1 == 0)) ? "SS_BATDEAD " : "", + ((pcmcia_socket[sock].cs_state.flags & SS_IOCARD) == 0 && + (pcmcia_socket[sock].k_state.bvd2 == 0)) ? "SS_BATWARN " : "", + pcmcia_socket[sock].k_state.vs_3v ? "SS_3VCARD " : "", + pcmcia_socket[sock].k_state.vs_Xv ? "SS_XVCARD " : ""); + + p += sprintf(p, "mask : %s%s%s%s%s\n", + pcmcia_socket[sock].cs_state.csc_mask & SS_DETECT ? "SS_DETECT " : "", + pcmcia_socket[sock].cs_state.csc_mask & SS_READY ? "SS_READY " : "", + pcmcia_socket[sock].cs_state.csc_mask & SS_BATDEAD ? "SS_BATDEAD " : "", + pcmcia_socket[sock].cs_state.csc_mask & SS_BATWARN ? "SS_BATWARN " : "", + pcmcia_socket[sock].cs_state.csc_mask & SS_STSCHG ? "SS_STSCHG " : ""); + + p += sprintf(p, "cs_flags : %s%s%s%s%s\n", + pcmcia_socket[sock].cs_state.flags & SS_PWR_AUTO ? + "SS_PWR_AUTO " : "", + pcmcia_socket[sock].cs_state.flags & SS_IOCARD ? + "SS_IOCARD " : "", + pcmcia_socket[sock].cs_state.flags & SS_RESET ? + "SS_RESET " : "", + pcmcia_socket[sock].cs_state.flags & SS_SPKR_ENA ? + "SS_SPKR_ENA " : "", + pcmcia_socket[sock].cs_state.flags & SS_OUTPUT_ENA ? + "SS_OUTPUT_ENA " : ""); + + p += sprintf(p, "Vcc : %d\n", pcmcia_socket[sock].cs_state.Vcc); + p += sprintf(p, "Vpp : %d\n", pcmcia_socket[sock].cs_state.Vpp); + p += sprintf(p, "irq : %d\n", pcmcia_socket[sock].cs_state.io_irq); + p += sprintf(p, "I/O : %u\n", pcmcia_socket[sock].speed_io); + p += sprintf(p, "attribute: %u\n", pcmcia_socket[sock].speed_attr); + p += sprintf(p, "common : %u\n", pcmcia_socket[sock].speed_mem); + return p-buf; +} + + +#endif /* defined(CONFIG_PROC_FS) */ diff --git a/package/linux/kernel-source/drivers/pcmcia/bcm4710_pcmcia.c b/package/linux/kernel-source/drivers/pcmcia/bcm4710_pcmcia.c new file mode 100644 index 000000000..6e3da040c --- /dev/null +++ b/package/linux/kernel-source/drivers/pcmcia/bcm4710_pcmcia.c @@ -0,0 +1,266 @@ +/* + * BCM4710 specific pcmcia routines. + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/config.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/tqueue.h> +#include <linux/timer.h> +#include <linux/mm.h> +#include <linux/proc_fs.h> +#include <linux/version.h> +#include <linux/types.h> +#include <linux/pci.h> + +#include <pcmcia/version.h> +#include <pcmcia/cs_types.h> +#include <pcmcia/cs.h> +#include <pcmcia/ss.h> +#include <pcmcia/bulkmem.h> +#include <pcmcia/cistpl.h> +#include <pcmcia/bus_ops.h> +#include "cs_internal.h" + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/system.h> + + +#include <typedefs.h> +#include <bcmdevs.h> +#include <bcm4710.h> +#include <sbconfig.h> +#include <sbextif.h> + +#include "bcm4710pcmcia.h" + +/* Use a static var for irq dev_id */ +static int bcm47xx_pcmcia_dev_id; + +/* Do we think we have a card or not? */ +static int bcm47xx_pcmcia_present = 0; + + +static void bcm4710_pcmcia_reset(void) +{ + extifregs_t *eir; + unsigned long s; + uint32 out0, out1, outen; + + + eir = (extifregs_t *) ioremap_nocache(BCM4710_REG_EXTIF, sizeof(extifregs_t)); + + save_and_cli(s); + + /* Use gpio7 to reset the pcmcia slot */ + outen = readl(&eir->gpio[0].outen); + outen |= BCM47XX_PCMCIA_RESET; + out0 = readl(&eir->gpio[0].out); + out0 &= ~(BCM47XX_PCMCIA_RESET); + out1 = out0 | BCM47XX_PCMCIA_RESET; + + writel(out0, &eir->gpio[0].out); + writel(outen, &eir->gpio[0].outen); + mdelay(1); + writel(out1, &eir->gpio[0].out); + mdelay(1); + writel(out0, &eir->gpio[0].out); + + restore_flags(s); +} + + +static int bcm4710_pcmcia_init(struct pcmcia_init *init) +{ + struct pci_dev *pdev; + extifregs_t *eir; + uint32 outen, intp, intm, tmp; + uint16 *attrsp; + int rc = 0, i; + extern unsigned long bcm4710_cpu_cycle; + + + if (!(pdev = pci_find_device(VENDOR_BROADCOM, SB_EXTIF, NULL))) { + printk(KERN_ERR "bcm4710_pcmcia: extif not found\n"); + return -ENODEV; + } + eir = (extifregs_t *) ioremap_nocache(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); + + /* Initialize the pcmcia i/f: 16bit no swap */ + writel(CF_EM_PCMCIA | CF_DS | CF_EN, &eir->pcmcia_config); + +#ifdef notYet + + /* Set the timing for memory accesses */ + tmp = (19 / bcm4710_cpu_cycle) << 24; /* W3 = 10nS */ + tmp = tmp | ((29 / bcm4710_cpu_cycle) << 16); /* W2 = 20nS */ + tmp = tmp | ((109 / bcm4710_cpu_cycle) << 8); /* W1 = 100nS */ + tmp = tmp | (129 / bcm4710_cpu_cycle); /* W0 = 120nS */ + writel(tmp, &eir->pcmcia_memwait); /* 0x01020a0c for a 100Mhz clock */ + + /* Set the timing for I/O accesses */ + tmp = (19 / bcm4710_cpu_cycle) << 24; /* W3 = 10nS */ + tmp = tmp | ((29 / bcm4710_cpu_cycle) << 16); /* W2 = 20nS */ + tmp = tmp | ((109 / bcm4710_cpu_cycle) << 8); /* W1 = 100nS */ + tmp = tmp | (129 / bcm4710_cpu_cycle); /* W0 = 120nS */ + writel(tmp, &eir->pcmcia_iowait); /* 0x01020a0c for a 100Mhz clock */ + + /* Set the timing for attribute accesses */ + tmp = (19 / bcm4710_cpu_cycle) << 24; /* W3 = 10nS */ + tmp = tmp | ((29 / bcm4710_cpu_cycle) << 16); /* W2 = 20nS */ + tmp = tmp | ((109 / bcm4710_cpu_cycle) << 8); /* W1 = 100nS */ + tmp = tmp | (129 / bcm4710_cpu_cycle); /* W0 = 120nS */ + writel(tmp, &eir->pcmcia_attrwait); /* 0x01020a0c for a 100Mhz clock */ + +#endif + /* Make sure gpio0 and gpio5 are inputs */ + outen = readl(&eir->gpio[0].outen); + outen &= ~(BCM47XX_PCMCIA_WP | BCM47XX_PCMCIA_STSCHG | BCM47XX_PCMCIA_RESET); + writel(outen, &eir->gpio[0].outen); + + /* Issue a reset to the pcmcia socket */ + bcm4710_pcmcia_reset(); + +#ifdef DO_BCM47XX_PCMCIA_INTERRUPTS + /* Setup gpio5 to be the STSCHG interrupt */ + intp = readl(&eir->gpiointpolarity); + writel(intp | BCM47XX_PCMCIA_STSCHG, &eir->gpiointpolarity); /* Active low */ + intm = readl(&eir->gpiointmask); + writel(intm | BCM47XX_PCMCIA_STSCHG, &eir->gpiointmask); /* Enable it */ +#endif + + DEBUG(2, "bcm4710_pcmcia after reset:\n"); + DEBUG(2, "\textstatus\t= 0x%08x:\n", readl(&eir->extstatus)); + DEBUG(2, "\tpcmcia_config\t= 0x%08x:\n", readl(&eir->pcmcia_config)); + DEBUG(2, "\tpcmcia_memwait\t= 0x%08x:\n", readl(&eir->pcmcia_memwait)); + DEBUG(2, "\tpcmcia_attrwait\t= 0x%08x:\n", readl(&eir->pcmcia_attrwait)); + DEBUG(2, "\tpcmcia_iowait\t= 0x%08x:\n", readl(&eir->pcmcia_iowait)); + DEBUG(2, "\tgpioin\t\t= 0x%08x:\n", readl(&eir->gpioin)); + DEBUG(2, "\tgpio_outen0\t= 0x%08x:\n", readl(&eir->gpio[0].outen)); + DEBUG(2, "\tgpio_out0\t= 0x%08x:\n", readl(&eir->gpio[0].out)); + DEBUG(2, "\tgpiointpolarity\t= 0x%08x:\n", readl(&eir->gpiointpolarity)); + DEBUG(2, "\tgpiointmask\t= 0x%08x:\n", readl(&eir->gpiointmask)); + +#ifdef DO_BCM47XX_PCMCIA_INTERRUPTS + /* Request pcmcia interrupt */ + rc = request_irq(BCM47XX_PCMCIA_IRQ, init->handler, SA_INTERRUPT, + "PCMCIA Interrupt", &bcm47xx_pcmcia_dev_id); +#endif + + attrsp = (uint16 *)ioremap_nocache(EXTIF_PCMCIA_CFGBASE(BCM4710_EXTIF), 0x1000); + tmp = readw(&attrsp[0]); + DEBUG(2, "\tattr[0] = 0x%04x\n", tmp); + if ((tmp == 0x7fff) || (tmp == 0x7f00)) { + bcm47xx_pcmcia_present = 0; + } else { + bcm47xx_pcmcia_present = 1; + } + + /* There's only one socket */ + return 1; +} + +static int bcm4710_pcmcia_shutdown(void) +{ + extifregs_t *eir; + uint32 intm; + + eir = (extifregs_t *) ioremap_nocache(BCM4710_REG_EXTIF, sizeof(extifregs_t)); + + /* Disable the pcmcia i/f */ + writel(0, &eir->pcmcia_config); + + /* Reset gpio's */ + intm = readl(&eir->gpiointmask); + writel(intm & ~BCM47XX_PCMCIA_STSCHG, &eir->gpiointmask); /* Disable it */ + + free_irq(BCM47XX_PCMCIA_IRQ, &bcm47xx_pcmcia_dev_id); + + return 0; +} + +static int +bcm4710_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state) +{ + extifregs_t *eir; + + eir = (extifregs_t *) ioremap_nocache(BCM4710_REG_EXTIF, sizeof(extifregs_t)); + + + if (sock != 0) { + printk(KERN_ERR "bcm4710 socket_state bad sock %d\n", sock); + return -1; + } + + if (bcm47xx_pcmcia_present) { + state->detect = 1; + state->ready = 1; + state->bvd1 = 1; + state->bvd2 = 1; + state->wrprot = (readl(&eir->gpioin) & BCM47XX_PCMCIA_WP) == BCM47XX_PCMCIA_WP; + state->vs_3v = 0; + state->vs_Xv = 0; + } else { + state->detect = 0; + state->ready = 0; + } + + return 1; +} + + +static int bcm4710_pcmcia_get_irq_info(struct pcmcia_irq_info *info) +{ + if (info->sock >= BCM47XX_PCMCIA_MAX_SOCK) return -1; + + info->irq = BCM47XX_PCMCIA_IRQ; + + return 0; +} + + +static int +bcm4710_pcmcia_configure_socket(const struct pcmcia_configure *configure) +{ + if (configure->sock >= BCM47XX_PCMCIA_MAX_SOCK) return -1; + + + DEBUG(2, "Vcc %dV Vpp %dV output %d speaker %d reset %d\n", configure->vcc, + configure->vpp, configure->output, configure->speaker, configure->reset); + + if ((configure->vcc != 50) || (configure->vpp != 50)) { + printk("%s: bad Vcc/Vpp (%d:%d)\n", __FUNCTION__, configure->vcc, + configure->vpp); + } + + if (configure->reset) { + /* Issue a reset to the pcmcia socket */ + DEBUG(1, "%s: Reseting socket\n", __FUNCTION__); + bcm4710_pcmcia_reset(); + } + + + return 0; +} + +struct pcmcia_low_level bcm4710_pcmcia_ops = { + bcm4710_pcmcia_init, + bcm4710_pcmcia_shutdown, + bcm4710_pcmcia_socket_state, + bcm4710_pcmcia_get_irq_info, + bcm4710_pcmcia_configure_socket +}; + diff --git a/package/linux/kernel-source/drivers/pcmcia/bcm4710pcmcia.h b/package/linux/kernel-source/drivers/pcmcia/bcm4710pcmcia.h new file mode 100644 index 000000000..42a7463bd --- /dev/null +++ b/package/linux/kernel-source/drivers/pcmcia/bcm4710pcmcia.h @@ -0,0 +1,118 @@ +/* + * + * bcm47xx pcmcia driver + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * Based on sa1100.h and include/asm-arm/arch-sa1100/pcmica.h + * from www.handhelds.org, + * and au1000_generic.c from oss.sgi.com. + * + * $Id$ + */ + +#if !defined(_BCM4710PCMCIA_H) +#define _BCM4710PCMCIA_H + +#include <pcmcia/cs_types.h> +#include <pcmcia/ss.h> +#include <pcmcia/bulkmem.h> +#include <pcmcia/cistpl.h> +#include "cs_internal.h" + + +/* The 47xx can only support one socket */ +#define BCM47XX_PCMCIA_MAX_SOCK 1 + +/* In the bcm947xx gpio's are used for some pcmcia functions */ +#define BCM47XX_PCMCIA_WP 0x01 /* Bit 0 is WP input */ +#define BCM47XX_PCMCIA_STSCHG 0x20 /* Bit 5 is STSCHG input/interrupt */ +#define BCM47XX_PCMCIA_RESET 0x80 /* Bit 7 is RESET */ + +#define BCM47XX_PCMCIA_IRQ 2 + +/* The socket driver actually works nicely in interrupt-driven form, + * so the (relatively infrequent) polling is "just to be sure." + */ +#define BCM47XX_PCMCIA_POLL_PERIOD (2 * HZ) + +#define BCM47XX_PCMCIA_IO_SPEED (255) +#define BCM47XX_PCMCIA_MEM_SPEED (300) + + +struct pcmcia_state { + unsigned detect: 1, + ready: 1, + bvd1: 1, + bvd2: 1, + wrprot: 1, + vs_3v: 1, + vs_Xv: 1; +}; + + +struct pcmcia_configure { + unsigned sock: 8, + vcc: 8, + vpp: 8, + output: 1, + speaker: 1, + reset: 1; +}; + +struct pcmcia_irq_info { + unsigned int sock; + unsigned int irq; +}; + +/* This structure encapsulates per-socket state which we might need to + * use when responding to a Card Services query of some kind. + */ +struct bcm47xx_pcmcia_socket { + socket_state_t cs_state; + struct pcmcia_state k_state; + unsigned int irq; + void (*handler)(void *, unsigned int); + void *handler_info; + pccard_io_map io_map[MAX_IO_WIN]; + pccard_mem_map mem_map[MAX_WIN]; + ioaddr_t virt_io, phys_attr, phys_mem; + unsigned short speed_io, speed_attr, speed_mem; +}; + +struct pcmcia_init { + void (*handler)(int irq, void *dev, struct pt_regs *regs); +}; + +struct pcmcia_low_level { + int (*init)(struct pcmcia_init *); + int (*shutdown)(void); + int (*socket_state)(unsigned sock, struct pcmcia_state *); + int (*get_irq_info)(struct pcmcia_irq_info *); + int (*configure_socket)(const struct pcmcia_configure *); +}; + +extern struct pcmcia_low_level bcm47xx_pcmcia_ops; + +/* I/O pins replacing memory pins + * (PCMCIA System Architecture, 2nd ed., by Don Anderson, p.75) + * + * These signals change meaning when going from memory-only to + * memory-or-I/O interface: + */ +#define iostschg bvd1 +#define iospkr bvd2 + + +/* + * Declaration for implementation specific low_level operations. + */ +extern struct pcmcia_low_level bcm4710_pcmcia_ops; + +#endif /* !defined(_BCM4710PCMCIA_H) */ |