summaryrefslogtreecommitdiffstats
path: root/package/linux-atm
diff options
context:
space:
mode:
Diffstat (limited to 'package/linux-atm')
-rw-r--r--package/linux-atm/Makefile18
-rw-r--r--package/linux-atm/files/br2684.hotplug19
-rw-r--r--package/linux-atm/patches/000-debian_16.patch598
-rw-r--r--package/linux-atm/patches/100-br2684.patch488
-rw-r--r--package/linux-atm/patches/100-subdirs.patch161
-rw-r--r--package/linux-atm/patches/300-no_autotools.patch40
6 files changed, 164 insertions, 1160 deletions
diff --git a/package/linux-atm/Makefile b/package/linux-atm/Makefile
index 3fe9dd0c9..4edd36271 100644
--- a/package/linux-atm/Makefile
+++ b/package/linux-atm/Makefile
@@ -31,16 +31,6 @@ define Package/linux-atm
This package contains a library for accessing the Linux ATM subsystem.
endef
-define Package/br2684ctl
- $(call Package/linux-atm/Default)
- SECTION:=net
- CATEGORY:=Network
- DEPENDS:=+linux-atm
- TITLE:=RFC2684 bridging utility
- DESCRIPTION:=\
- This package contains an ATM RFC2684 bridging utility.
-endef
-
define Build/Configure
$(call Build/Configure/Default)
# prevent autoheader invocation
@@ -74,15 +64,7 @@ define Package/linux-atm/install
cp -f $(PKG_INSTALL_DIR)/usr/lib/libatm.so.1 $(1)/usr/lib
endef
-define Package/br2684ctl/install
- $(INSTALL_DIR) $(1)/usr/sbin
- $(CP) $(PKG_INSTALL_DIR)/usr/sbin/br2684ctl $(1)/usr/sbin/
- $(INSTALL_DIR) $(1)/etc/hotplug.d/net
- $(INSTALL_DATA) ./files/br2684.hotplug $(1)/etc/hotplug.d/net/30-br2684
-endef
-
$(eval $(call BuildPackage,linux-atm))
-$(eval $(call BuildPackage,br2684ctl))
$(eval $(call RequireCommand,automake, \
$(PKG_NAME) requires automake. \
diff --git a/package/linux-atm/files/br2684.hotplug b/package/linux-atm/files/br2684.hotplug
deleted file mode 100644
index 242e7e515..000000000
--- a/package/linux-atm/files/br2684.hotplug
+++ /dev/null
@@ -1,19 +0,0 @@
-[ "${INTERFACE%%[0-9]*}" = "atm" ] && {
- case "$ACTION" in
- register)
- [ "$pppoe_atm" = 1 ] && {
- case "$atm_encaps" in
- 0|vc) ENCAPS=0 ;;
- 1|llc) ENCAPS=1 ;;
- *) ENCAPS=0 ;;
- esac
- insmod br2684 2>&- >&-
- br2684ctl -c0 -e${ENCAPS} -a${atm_vpi:-8}.${atm_vci:-35} &
- }
- ;;
- unregister)
- killall br2684ctl 2>&- >&-
- rmmod br2684
- ;;
- esac
-}
diff --git a/package/linux-atm/patches/000-debian_16.patch b/package/linux-atm/patches/000-debian_16.patch
index 41dc437ca..da82cc832 100644
--- a/package/linux-atm/patches/000-debian_16.patch
+++ b/package/linux-atm/patches/000-debian_16.patch
@@ -29654,517 +29654,6 @@
@for file in $(DISTFILES); do \
d=$(srcdir); \
if test -d $$d/$$file; then \
---- linux-atm-2.4.1.orig/src/br2684/Makefile.am
-+++ linux-atm-2.4.1/src/br2684/Makefile.am
-@@ -0,0 +1,10 @@
-+sbin_PROGRAMS = br2684ctl
-+
-+LDADD = $(top_builddir)/src/lib/libatm.la
-+
-+br2684ctl_SOURCES = br2684ctl.c
-+
-+man_MANS = br2684ctl.8
-+
-+EXTRA_DIST = $(man_MANS) USAGE.br2684
-+
---- linux-atm-2.4.1.orig/src/br2684/Makefile.in
-+++ linux-atm-2.4.1/src/br2684/Makefile.in
-@@ -0,0 +1,418 @@
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-+
-+# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
-+# This Makefile.in is free software; the Free Software Foundation
-+# gives unlimited permission to copy and/or distribute it,
-+# with or without modifications, as long as this notice is preserved.
-+
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-+# PARTICULAR PURPOSE.
-+
-+
-+SHELL = @SHELL@
-+
-+srcdir = @srcdir@
-+top_srcdir = @top_srcdir@
-+VPATH = @srcdir@
-+prefix = @prefix@
-+exec_prefix = @exec_prefix@
-+
-+bindir = @bindir@
-+sbindir = @sbindir@
-+libexecdir = @libexecdir@
-+datadir = @datadir@
-+sysconfdir = @sysconfdir@
-+sharedstatedir = @sharedstatedir@
-+localstatedir = @localstatedir@
-+libdir = @libdir@
-+infodir = @infodir@
-+mandir = @mandir@
-+includedir = @includedir@
-+oldincludedir = /usr/include
-+
-+DESTDIR =
-+
-+pkgdatadir = $(datadir)/@PACKAGE@
-+pkglibdir = $(libdir)/@PACKAGE@
-+pkgincludedir = $(includedir)/@PACKAGE@
-+
-+top_builddir = ../..
-+
-+ACLOCAL = @ACLOCAL@
-+AUTOCONF = @AUTOCONF@
-+AUTOMAKE = @AUTOMAKE@
-+AUTOHEADER = @AUTOHEADER@
-+
-+INSTALL = @INSTALL@
-+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-+INSTALL_DATA = @INSTALL_DATA@
-+INSTALL_SCRIPT = @INSTALL_SCRIPT@
-+transform = @program_transform_name@
-+
-+NORMAL_INSTALL = :
-+PRE_INSTALL = :
-+POST_INSTALL = :
-+NORMAL_UNINSTALL = :
-+PRE_UNINSTALL = :
-+POST_UNINSTALL = :
-+host_alias = @host_alias@
-+host_triplet = @host@
-+AR = @AR@
-+AS = @AS@
-+CC = /usr/src/openwrt/staging_dir_mipsel/bin/mipsel-linux-gcc
-+CXX = @CXX@
-+CXXCPP = @CXXCPP@
-+DLLTOOL = @DLLTOOL@
-+ECHO = @ECHO@
-+EGREP = @EGREP@
-+EXEEXT = @EXEEXT@
-+F77 = @F77@
-+GCJ = @GCJ@
-+GCJFLAGS = @GCJFLAGS@
-+HAVE_LIB = @HAVE_LIB@
-+LEX = @LEX@
-+LIB = @LIB@
-+LIBTOOL = @LIBTOOL@
-+LIBTOOL_DEPS = @LIBTOOL_DEPS@
-+LIBVER_AGE = @LIBVER_AGE@
-+LIBVER_CURRENT = @LIBVER_CURRENT@
-+LIBVER_REVISION = @LIBVER_REVISION@
-+LN_S = @LN_S@
-+LTLIB = @LTLIB@
-+MAKEINFO = @MAKEINFO@
-+OBJDUMP = @OBJDUMP@
-+OBJEXT = @OBJEXT@
-+PACKAGE = @PACKAGE@
-+PERL = @PERL@
-+RANLIB = @RANLIB@
-+RC = @RC@
-+STRIP = @STRIP@
-+VERSION = @VERSION@
-+YACC = @YACC@
-+
-+sbin_PROGRAMS = br2684ctl
-+
-+LDADD = $(top_builddir)/src/lib/libatm.la
-+
-+br2684ctl_SOURCES = br2684ctl.c
-+
-+man_MANS = br2684ctl.8
-+
-+EXTRA_DIST = $(man_MANS) USAGE.br2684
-+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-+CONFIG_HEADER = ../../config.h
-+CONFIG_CLEAN_FILES =
-+sbin_PROGRAMS = br2684ctl$(EXEEXT)
-+PROGRAMS = $(sbin_PROGRAMS)
-+
-+
-+DEFS = @DEFS@ -I. -I$(srcdir) -I../..
-+CPPFLAGS = @CPPFLAGS@
-+LDFLAGS = @LDFLAGS@
-+LIBS = @LIBS@
-+br2684ctl_OBJECTS = br2684ctl.$(OBJEXT)
-+br2684ctl_LDADD = $(LDADD)
-+br2684ctl_DEPENDENCIES = $(top_builddir)/src/lib/libatm.la
-+br2684ctl_LDFLAGS =
-+CFLAGS = @CFLAGS@
-+COMPILE = $(TARGET_CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-+LTCOMPILE = $(LIBTOOL) --mode=compile $(TARGET_CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-+CCLD = $(TARGET_CC)
-+LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-+man8dir = $(mandir)/man8
-+MANS = $(man_MANS)
-+
-+NROFF = nroff
-+DIST_COMMON = Makefile.am Makefile.in
-+
-+
-+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-+
-+TAR = tar
-+GZIP_ENV = --best
-+DEP_FILES = .deps/br2684ctl.P
-+SOURCES = $(br2684ctl_SOURCES)
-+OBJECTS = $(br2684ctl_OBJECTS)
-+
-+all: all-redirect
-+.SUFFIXES:
-+.SUFFIXES: .S .c .lo .o .obj .s
-+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
-+ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/br2684/Makefile
-+
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
-+ cd $(top_builddir) \
-+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-+
-+
-+mostlyclean-sbinPROGRAMS:
-+
-+clean-sbinPROGRAMS:
-+ -test -z "$(sbin_PROGRAMS)" || rm -f $(sbin_PROGRAMS)
-+
-+distclean-sbinPROGRAMS:
-+
-+maintainer-clean-sbinPROGRAMS:
-+
-+install-sbinPROGRAMS: $(sbin_PROGRAMS)
-+ @$(NORMAL_INSTALL)
-+ $(mkinstalldirs) $(DESTDIR)$(sbindir)
-+ @list='$(sbin_PROGRAMS)'; for p in $$list; do \
-+ if test -f $$p; then \
-+ echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
-+ $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
-+ else :; fi; \
-+ done
-+
-+uninstall-sbinPROGRAMS:
-+ @$(NORMAL_UNINSTALL)
-+ list='$(sbin_PROGRAMS)'; for p in $$list; do \
-+ rm -f $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
-+ done
-+
-+# FIXME: We should only use cygpath when building on Windows,
-+# and only if it is available.
-+.c.obj:
-+ $(COMPILE) -c `cygpath -w $<`
-+
-+.s.o:
-+ $(COMPILE) -c $<
-+
-+.S.o:
-+ $(COMPILE) -c $<
-+
-+mostlyclean-compile:
-+ -rm -f *.o core *.core
-+ -rm -f *.$(OBJEXT)
-+
-+clean-compile:
-+
-+distclean-compile:
-+ -rm -f *.tab.c
-+
-+maintainer-clean-compile:
-+
-+.s.lo:
-+ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
-+
-+.S.lo:
-+ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
-+
-+mostlyclean-libtool:
-+ -rm -f *.lo
-+
-+clean-libtool:
-+ -rm -rf .libs _libs
-+
-+distclean-libtool:
-+
-+maintainer-clean-libtool:
-+
-+br2684ctl$(EXEEXT): $(br2684ctl_OBJECTS) $(br2684ctl_DEPENDENCIES)
-+ @rm -f br2684ctl$(EXEEXT)
-+ $(LINK) $(br2684ctl_LDFLAGS) $(br2684ctl_OBJECTS) $(br2684ctl_LDADD) $(LIBS)
-+
-+install-man8:
-+ $(mkinstalldirs) $(DESTDIR)$(man8dir)
-+ @list='$(man8_MANS)'; \
-+ l2='$(man_MANS)'; for i in $$l2; do \
-+ case "$$i" in \
-+ *.8*) list="$$list $$i" ;; \
-+ esac; \
-+ done; \
-+ for i in $$list; do \
-+ if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
-+ else file=$$i; fi; \
-+ ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-+ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-+ inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-+ echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man8dir)/$$inst"; \
-+ $(INSTALL_DATA) $$file $(DESTDIR)$(man8dir)/$$inst; \
-+ done
-+
-+uninstall-man8:
-+ @list='$(man8_MANS)'; \
-+ l2='$(man_MANS)'; for i in $$l2; do \
-+ case "$$i" in \
-+ *.8*) list="$$list $$i" ;; \
-+ esac; \
-+ done; \
-+ for i in $$list; do \
-+ ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-+ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-+ inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-+ echo " rm -f $(DESTDIR)$(man8dir)/$$inst"; \
-+ rm -f $(DESTDIR)$(man8dir)/$$inst; \
-+ done
-+install-man: $(MANS)
-+ @$(NORMAL_INSTALL)
-+ $(MAKE) $(AM_MAKEFLAGS) install-man8
-+uninstall-man:
-+ @$(NORMAL_UNINSTALL)
-+ $(MAKE) $(AM_MAKEFLAGS) uninstall-man8
-+
-+tags: TAGS
-+
-+ID: $(HEADERS) $(SOURCES) $(LISP)
-+ list='$(SOURCES) $(HEADERS)'; \
-+ unique=`for i in $$list; do echo $$i; done | \
-+ awk ' { files[$$0] = 1; } \
-+ END { for (i in files) print i; }'`; \
-+ here=`pwd` && cd $(srcdir) \
-+ && mkid -f$$here/ID $$unique $(LISP)
-+
-+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
-+ tags=; \
-+ here=`pwd`; \
-+ list='$(SOURCES) $(HEADERS)'; \
-+ unique=`for i in $$list; do echo $$i; done | \
-+ awk ' { files[$$0] = 1; } \
-+ END { for (i in files) print i; }'`; \
-+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-+ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
-+
-+mostlyclean-tags:
-+
-+clean-tags:
-+
-+distclean-tags:
-+ -rm -f TAGS ID
-+
-+maintainer-clean-tags:
-+
-+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-+
-+subdir = src/br2684
-+
-+distdir: $(DISTFILES)
-+ here=`cd $(top_builddir) && pwd`; \
-+ top_distdir=`cd $(top_distdir) && pwd`; \
-+ distdir=`cd $(distdir) && pwd`; \
-+ cd $(top_srcdir) \
-+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/br2684/Makefile
-+ @for file in $(DISTFILES); do \
-+ d=$(srcdir); \
-+ if test -d $$d/$$file; then \
-+ cp -pr $$d/$$file $(distdir)/$$file; \
-+ else \
-+ test -f $(distdir)/$$file \
-+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-+ || cp -p $$d/$$file $(distdir)/$$file || :; \
-+ fi; \
-+ done
-+
-+DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
-+
-+-include $(DEP_FILES)
-+
-+mostlyclean-depend:
-+
-+clean-depend:
-+
-+distclean-depend:
-+ -rm -rf .deps
-+
-+maintainer-clean-depend:
-+
-+%.o: %.c
-+ @echo '$(COMPILE) -c $<'; \
-+ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-cp .deps/$(*F).pp .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm .deps/$(*F).pp
-+
-+%.lo: %.c
-+ @echo '$(LTCOMPILE) -c $<'; \
-+ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-+ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
-+ < .deps/$(*F).pp > .deps/$(*F).P; \
-+ tr ' ' '\012' < .deps/$(*F).pp \
-+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-+ >> .deps/$(*F).P; \
-+ rm -f .deps/$(*F).pp
-+info-am:
-+info: info-am
-+dvi-am:
-+dvi: dvi-am
-+check-am: all-am
-+check: check-am
-+installcheck-am:
-+installcheck: installcheck-am
-+install-exec-am: install-sbinPROGRAMS
-+install-exec: install-exec-am
-+
-+install-data-am: install-man
-+install-data: install-data-am
-+
-+install-am: all-am
-+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-+install: install-am
-+uninstall-am: uninstall-sbinPROGRAMS uninstall-man
-+uninstall: uninstall-am
-+all-am: Makefile $(PROGRAMS) $(MANS)
-+all-redirect: all-am
-+install-strip:
-+ $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-+installdirs:
-+ $(mkinstalldirs) $(DESTDIR)$(sbindir) $(DESTDIR)$(mandir)/man8
-+
-+
-+mostlyclean-generic:
-+
-+clean-generic:
-+
-+distclean-generic:
-+ -rm -f Makefile $(CONFIG_CLEAN_FILES)
-+ -rm -f config.cache config.log stamp-h stamp-h[0-9]*
-+
-+maintainer-clean-generic:
-+mostlyclean-am: mostlyclean-sbinPROGRAMS mostlyclean-compile \
-+ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
-+ mostlyclean-generic
-+
-+mostlyclean: mostlyclean-am
-+
-+clean-am: clean-sbinPROGRAMS clean-compile clean-libtool clean-tags \
-+ clean-depend clean-generic mostlyclean-am
-+
-+clean: clean-am
-+
-+distclean-am: distclean-sbinPROGRAMS distclean-compile \
-+ distclean-libtool distclean-tags distclean-depend \
-+ distclean-generic clean-am
-+ -rm -f libtool
-+
-+distclean: distclean-am
-+
-+maintainer-clean-am: maintainer-clean-sbinPROGRAMS \
-+ maintainer-clean-compile maintainer-clean-libtool \
-+ maintainer-clean-tags maintainer-clean-depend \
-+ maintainer-clean-generic distclean-am
-+ @echo "This command is intended for maintainers to use;"
-+ @echo "it deletes files that may require special tools to rebuild."
-+
-+maintainer-clean: maintainer-clean-am
-+
-+.PHONY: mostlyclean-sbinPROGRAMS distclean-sbinPROGRAMS \
-+clean-sbinPROGRAMS maintainer-clean-sbinPROGRAMS uninstall-sbinPROGRAMS \
-+install-sbinPROGRAMS mostlyclean-compile distclean-compile \
-+clean-compile maintainer-clean-compile mostlyclean-libtool \
-+distclean-libtool clean-libtool maintainer-clean-libtool install-man8 \
-+uninstall-man8 install-man uninstall-man tags mostlyclean-tags \
-+distclean-tags clean-tags maintainer-clean-tags distdir \
-+mostlyclean-depend distclean-depend clean-depend \
-+maintainer-clean-depend info-am info dvi-am dvi check check-am \
-+installcheck-am installcheck install-exec-am install-exec \
-+install-data-am install-data install-am install uninstall-am uninstall \
-+all-redirect all-am all installdirs mostlyclean-generic \
-+distclean-generic clean-generic maintainer-clean-generic clean \
-+mostlyclean distclean maintainer-clean
-+
-+
-+# Tell versions [3.59,3.63) of GNU make to not export all variables.
-+# Otherwise a system limit (for SysV at least) may be exceeded.
-+.NOEXPORT:
---- linux-atm-2.4.1.orig/src/br2684/br2684ctl.8
-+++ linux-atm-2.4.1/src/br2684/br2684ctl.8
-@@ -0,0 +1,74 @@
-+.\"
-+.TH br2684ctl 1 "7 Jul 2003"
-+.SH NAME
-+br2684ctl \- RFC1483/2684 Bridge Daemon
-+.SH SYNOPSIS
-+.B br2684ctl
-+[
-+.BI \-b
-+] [[
-+.BI \-c\ n
-+] [
-+.BI \-e\ 0|1
-+] [
-+.BI \-s\ sndbuf
-+] [
-+.BI \-a\ [itf].vpi.vci
-+]] ...
-+.SH PARAMETERS
-+.TP 15
-+.BI \-a\ [itf].vpi.vci
-+ATM PVC number, VPI and VCI. (Required)
-+.BI \-b
-+Puts the process in the background.
-+.TP 15
-+.BI \-c\ n
-+br2684 interface number such as 0, 1, ... (Required)
-+.TP 15
-+.BI \-e\ 0|1
-+Encapsulation method: 0=LLC, 1=VC mux (the default is 0 or LLC)
-+.TP 15
-+.TP 15
-+.BI \-s\ sndbuf
-+Send buffer size. Default is 8192.
-+.SH DESCRIPTION
-+br2684ctl handles RFC1483/2684 bridged PDUs.
-+This is most often used in ADSL scenarios where
-+.I usually
-+the subscribers'
-+ethernet traffic is encapsulated in ATM AAL5 (by bridging ADSL modems)
-+according to RFC2684.
-+The subscriber-side ADSL modem can be external with an ethernet connector
-+or an internal ADSL card in a PC.
-+RFC1483 has been obsoleted by RFC2684.
-+
-+For example it is possible to set up your Linux box to handle several
-+ATM PVC's with bridged-1483 (sometimes referred as SNAP) encapsulation.
-+The Linux network stack might provide DHCP, IP masquerading, IP firewall services or
-+bridge the Ethernet frames just like it had several ethernet interfaces.
-+In fact it can have several (logical) ethernet interfaces, where
-+ATM is just used as a carrier.
-+.SH USAGE
-+br2684ctl creates a new network interface named nas[n]
-+which is bound to an specific ATM PVC. It requires two mandatory
-+arguments: -c, the interface number, and -a, the ATM PVC. It should be
-+noted that the order of the command arguments matter; -c should be
-+followed by -a. You can create as many interfaces as necessary
-+in one go, just make a long command line ;)
-+
-+For example, following command will create a nas0 interface which uses
-+the ATM PVC with VPI=0 and VCI=401. You need to configure the PVC connection
-+0.401 on the ATM switch manually.
-+
-+% br2684ctl -c 0 -a 0.401
-+
-+The command will only create a new interface nas0.
-+Next step is to assign an IP address and netmask to
-+the interface nas0 using the ifconfig command. Using ifconfig, you can
-+also assign a Ethernet MAC address to the interface nas0, if necessary.
-+
-+% ifconfig nas0 192.168.2.1 netmask 255.255.255.0
-+.SH NOTES
-+This man page is based on a tutorial by by Joonbum Byun <jbyun@megaxess.com>
-+.SH SEE ALSO
-+.BR qos (7)
--- linux-atm-2.4.1.orig/doc/Makefile.in
+++ linux-atm-2.4.1/doc/Makefile.in
@@ -1,4 +1,4 @@
@@ -30808,88 +30297,6 @@
++#endif /* __KERNEL__ */
++
++#endif
---- linux-atm-2.4.1.orig/debian/README.br2684
-+++ linux-atm-2.4.1/debian/README.br2684
-@@ -0,0 +1,79 @@
-+README.br2684
-+~~~~~~~~~~~~~
-+
-+The linux-atm CVS includes a program called br2684 which can be used
-+to configure br2684 ATM bridging. On request (#216663), the Debian
-+maintainer included br2684 in the source package.
-+
-+This was done in a way that separates the - unreleased CVS snapshot -
-+br2684 program into its own binary package so avoid shipping
-+released and unreleased software in the same binary package.
-+
-+The modified source package (2.4.1-10) was rejected by Debian
-+ftpmaster because he found the package too small to warrant its own
-+.deb.
-+
-+Hence, atm-tools-br2684 is not built any more.
-+
-+You can, however, build your own atm-tools-br2684 package from the
-+official Debian source package by following this "script".
-+
-+(0)
-+Install all build dependencies plus autoconf, libtool, automake. If
-+#219936 is still unfixed, copy /usr/bin/autoreconf to a local
-+directory and apply the following patch after changing "+@@" to "@@"
-+in the first line (this was inserted to be able to feed this readme to
-+patch to apply the patch given in (1).
-+
-+--- /usr/bin/autoreconf
-++++ autoreconf
-++@@ -183,7 +183,7 @@
-+ {
-+ $autoconf .= ' --force';
-+ $autoheader .= ' --force';
-+- $automake .= ' --force-missing';
-++ $automake .= '';
-+ $autopoint .= ' --force';
-+ $libtoolize .= ' --force';
-+ }
-+
-+(1) Apply the following patch
-+--- configure.in.orig
-++++ configure.in
-+@@ -152,6 +152,7 @@
-+ m4/Makefile \
-+ src/Makefile \
-+ src/include/Makefile \
-++ src/br2684/Makefile \
-+ src/lib/Makefile \
-+ src/test/Makefile \
-+ src/debug/Makefile \
-+--- debian/rules.orig
-++++ debian/rules
-+@@ -11,7 +11,7 @@
-+ export PACKAGE=linux-atm
-+
-+ buildindeppackages=atm-dev
-+-buildarchpackages=atm-tools libatm1 libatm1-dev
-++buildarchpackages=atm-tools atm-tools-br2684 libatm1 libatm1-dev
-+
-+ # generate -ppackage1 -ppackage2 ... commandline for debhelper
-+ dhbuildarchpackages=$(addprefix -p,$(buildarchpackages))
-+--- src/Makefile.am.orig
-++++ src/Makefile.am
-+@@ -1,3 +1,3 @@
-+ SUBDIRS = include lib test debug qgen saal sigd maint arpd ilmid man led lane \
-+- mpoad switch config extra
-++ mpoad switch config extra br2684
-+
-+
-+(2)
-+Invoke autoreconf -f -i
-+
-+(3)
-+create your own changelog entry and your own local version number
-+
-+(4)
-+Build the package as usual
-+
-+Marc Haber, 2003-11-05
--- linux-atm-2.4.1.orig/debian/control
+++ linux-atm-2.4.1/debian/control
@@ -0,0 +1,57 @@
@@ -30950,11 +30357,6 @@
+ Transfer Mode) related programs.
+ .
+ Homepage: http://linux-atm.sourceforge.net/
---- linux-atm-2.4.1.orig/debian/atm-tools-br2684.dirs
-+++ linux-atm-2.4.1/debian/atm-tools-br2684.dirs
-@@ -0,0 +1,2 @@
-+usr/sbin
-+usr/share/man/man8
--- linux-atm-2.4.1.orig/debian/rules
+++ linux-atm-2.4.1/debian/rules
@@ -0,0 +1,136 @@
diff --git a/package/linux-atm/patches/100-br2684.patch b/package/linux-atm/patches/100-br2684.patch
deleted file mode 100644
index dfb1de020..000000000
--- a/package/linux-atm/patches/100-br2684.patch
+++ /dev/null
@@ -1,488 +0,0 @@
-diff -ruN linux-atm-2.4.1/configure.in linux-atm-2.4.1.new/configure.in
---- linux-atm-2.4.1/configure.in 2003-04-25 04:17:05.000000000 +0200
-+++ linux-atm-2.4.1.new/configure.in 2005-07-27 15:45:49.532396543 +0200
-@@ -153,26 +153,6 @@
- src/Makefile \
- src/include/Makefile \
- src/lib/Makefile \
-- src/test/Makefile \
-- src/debug/Makefile \
-- src/qgen/Makefile \
-- src/saal/Makefile \
-- src/sigd/Makefile \
-- src/maint/Makefile \
-- src/arpd/Makefile \
-- src/ilmid/Makefile \
-- src/ilmid/asn1/Makefile \
-- src/man/Makefile \
-- src/led/Makefile \
-- src/lane/Makefile \
-- src/mpoad/Makefile \
-- src/switch/Makefile \
-- src/switch/debug/Makefile \
-- src/switch/tcp/Makefile \
-- src/config/Makefile \
-- src/config/init-redhat/Makefile \
-- src/extra/Makefile \
-- src/extra/linux-atm.spec \
-- src/extra/ANS/Makefile
-+ src/br2684/Makefile \
- )
-
-diff -ruN linux-atm-2.4.1/src/br2684/Makefile linux-atm-2.4.1.new/src/br2684/Makefile
---- linux-atm-2.4.1/src/br2684/Makefile 1970-01-01 02:00:00.000000000 +0200
-+++ linux-atm-2.4.1.new/src/br2684/Makefile 2002-07-15 23:44:25.000000000 +0200
-@@ -0,0 +1,13 @@
-+PREFIX=${TI_FILESYSTEM}
-+
-+all: br2684ctl
-+
-+br2684ctl: br2684ctl.c
-+ gcc -latm -o br2684ctl br2684ctl.c
-+ strip br2684ctl
-+
-+install: br2684ctl
-+ cp br2684ctl $(PREFIX)/usr/sbin/
-+
-+clean:
-+ rm -rf br2684ctl *.o
-diff -ruN linux-atm-2.4.1/src/Makefile.am linux-atm-2.4.1.new/src/Makefile.am
---- linux-atm-2.4.1/src/Makefile.am 2001-10-03 23:14:53.000000000 +0200
-+++ linux-atm-2.4.1.new/src/Makefile.am 2005-07-27 15:33:52.389309711 +0200
-@@ -1,3 +1,2 @@
--SUBDIRS = include lib test debug qgen saal sigd maint arpd ilmid man led lane \
-- mpoad switch config extra
-+SUBDIRS = include lib br2684
-
-
-diff -Nur linux-atm-2.4.1.orig/src/include/linux/atmbr2684.h linux-atm-2.4.1/src/include/linux/atmbr2684.h
---- linux-atm-2.4.1.orig/src/include/linux/atmbr2684.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-atm-2.4.1/src/include/linux/atmbr2684.h 2005-11-13 00:06:42.000000000 +0100
-@@ -0,0 +1,117 @@
-+#ifndef _LINUX_ATMBR2684_H
-+#define _LINUX_ATMBR2684_H
-+
-+#include <linux/atm.h>
-+#include <linux/if.h> /* For IFNAMSIZ */
-+#include <linux/if_ether.h> /* ETH_P_* */
-+
-+/*
-+ * Type of media we're bridging (ethernet, token ring, etc) Currently only
-+ * ethernet is supported
-+ */
-+#define BR2684_MEDIA_ETHERNET (0) /* 802.3 */
-+#define BR2684_MEDIA_802_4 (1) /* 802.4 */
-+#define BR2684_MEDIA_TR (2) /* 802.5 - token ring */
-+#define BR2684_MEDIA_FDDI (3)
-+#define BR2684_MEDIA_802_6 (4) /* 802.6 */
-+
-+/*
-+ * Is there FCS inbound on this VC? This currently isn't supported.
-+ */
-+#define BR2684_FCSIN_NO (0)
-+#define BR2684_FCSIN_IGNORE (1)
-+#define BR2684_FCSIN_VERIFY (2)
-+
-+/*
-+ * Is there FCS outbound on this VC? This currently isn't supported.
-+ */
-+#define BR2684_FCSOUT_NO (0)
-+#define BR2684_FCSOUT_SENDZERO (1)
-+#define BR2684_FCSOUT_GENERATE (2)
-+
-+/*
-+ * Does this VC include LLC encapsulation?
-+ */
-+#define BR2684_ENCAPS_VC (0) /* VC-mux */
-+#define BR2684_ENCAPS_LLC (1)
-+#define BR2684_ENCAPS_AUTODETECT (2) /* Unsuported */
-+
-+/*
-+ * Is this VC bridged or routed?
-+ */
-+
-+#define BR2684_PAYLOAD_ROUTED (0)
-+#define BR2684_PAYLOAD_BRIDGED (1)
-+
-+
-+/*
-+ * This is for the ATM_NEWBACKENDIF call - these are like socket families:
-+ * the first element of the structure is the backend number and the rest
-+ * is per-backend specific
-+ */
-+struct atm_newif_br2684 {
-+ atm_backend_t backend_num; /* ATM_BACKEND_BR2684 */
-+ int media; /* BR2684_MEDIA_* */
-+ char ifname[IFNAMSIZ];
-+ int mtu;
-+ int payload; /* bridged or routed */
-+};
-+
-+/*
-+ * This structure is used to specify a br2684 interface - either by a
-+ * positive integer (returned by ATM_NEWBACKENDIF) or the interfaces name
-+ */
-+#define BR2684_FIND_BYNOTHING (0)
-+#define BR2684_FIND_BYNUM (1)
-+#define BR2684_FIND_BYIFNAME (2)
-+struct br2684_if_spec {
-+ int method; /* BR2684_FIND_* */
-+ union {
-+ char ifname[IFNAMSIZ];
-+ int devnum;
-+ } spec;
-+};
-+
-+/*
-+ * This is for the ATM_SETBACKEND call - these are like socket families:
-+ * the first element of the structure is the backend number and the rest
-+ * is per-backend specific
-+ */
-+struct atm_backend_br2684 {
-+ atm_backend_t backend_num; /* ATM_BACKEND_BR2684 */
-+ struct br2684_if_spec ifspec;
-+ int fcs_in; /* BR2684_FCSIN_* */
-+ int fcs_out; /* BR2684_FCSOUT_* */
-+ int fcs_auto; /* 1: fcs_{in,out} disabled if no FCS rx'ed */
-+ int encaps; /* BR2684_ENCAPS_* */
-+ int payload; /* BR2684_PAYLOAD_* */
-+ int has_vpiid; /* 1: use vpn_id - Unsupported */
-+ __u8 vpn_id[7];
-+ int send_padding; /* unsupported */
-+ int min_size; /* we will pad smaller packets than this */
-+};
-+
-+/*
-+ * The BR2684_SETFILT ioctl is an experimental mechanism for folks
-+ * terminating a large number of IP-only vcc's. When netfilter allows
-+ * efficient per-if in/out filters, this support will be removed
-+ */
-+struct br2684_filter {
-+ __u32 prefix; /* network byte order */
-+ __u32 netmask; /* 0 = disable filter */
-+};
-+
-+struct br2684_filter_set {
-+ struct br2684_if_spec ifspec;
-+ struct br2684_filter filter;
-+};
-+
-+enum br2684_payload {
-+ p_routed = BR2684_PAYLOAD_ROUTED,
-+ p_bridged = BR2684_PAYLOAD_BRIDGED,
-+};
-+
-+#define BR2684_SETFILT _IOW( 'a', ATMIOC_BACKEND + 0, \
-+ struct br2684_filter_set)
-+
-+#endif /* _LINUX_ATMBR2684_H */
---- linux-atm-2.4.1/src/br2684/br2684ctl.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-atm-2.4.1.new/src/br2684/br2684ctl.c 2006-02-07 14:19:42.000000000 +0100
-@@ -0,0 +1,307 @@
-+#include <stdio.h>
-+#include <stdlib.h>
-+#include <unistd.h>
-+#include <errno.h>
-+#include <sys/ioctl.h>
-+#include <string.h>
-+#include <syslog.h>
-+#include <atm.h>
-+#include <linux/atmdev.h>
-+#include <linux/atmbr2684.h>
-+
-+/* Written by Marcell GAL <cell@sch.bme.hu> to make use of the */
-+/* ioctls defined in the br2684... kernel patch */
-+/* Compile with cc -o br2684ctl br2684ctl.c -latm */
-+
-+/*
-+ Modified feb 2001 by Stephen Aaskov (saa@lasat.com)
-+ - Added daemonization code
-+ - Added syslog
-+
-+ TODO: Delete interfaces after exit?
-+*/
-+
-+
-+#define LOG_NAME "RFC1483/2684 bridge"
-+#define LOG_OPTION LOG_PERROR
-+#define LOG_FACILITY LOG_LOCAL0
-+
-+
-+int lastsock, lastitf;
-+
-+void fatal(char *str, int i)
-+{
-+ syslog(LOG_ERR, "Fatal: %s", str);
-+ exit(-2);
-+};
-+
-+
-+void exitFunc(void)
-+{
-+ syslog(LOG_PID, "Daemon terminated\n");
-+}
-+
-+
-+int create_pidfile(char *nstr)
-+{
-+ FILE *pidfile = NULL;
-+ char name[20];
-+ int num;
-+
-+ if (nstr == NULL)
-+ return -1;
-+ num = atoi(nstr);
-+ if (num < 0)
-+ return -1;
-+
-+ snprintf(name, 20, "/var/run/nas%d.pid", num);
-+ pidfile = fopen(name, "w");
-+ if (pidfile == NULL)
-+ return -1;
-+ fprintf(pidfile, "%d", getpid());
-+ fclose(pidfile);
-+
-+ return 0;
-+}
-+
-+int create_br(char *nstr, int payload)
-+{
-+ int num, err;
-+
-+ if (lastsock < 0) {
-+ lastsock = socket(PF_ATMPVC, SOCK_DGRAM, ATM_AAL5);
-+ }
-+ if (lastsock < 0) {
-+ syslog(LOG_ERR, "socket creation failed: %s",
-+ strerror(errno));
-+ } else {
-+ /* create the device with ioctl: */
-+ num = atoi(nstr);
-+ if (num >= 0 && num < 1234567890) {
-+ struct atm_newif_br2684 ni;
-+ ni.backend_num = ATM_BACKEND_BR2684;
-+ ni.media = BR2684_MEDIA_ETHERNET;
-+ ni.mtu = 1500;
-+ ni.payload = payload; /* bridged or routed */
-+ sprintf(ni.ifname, "nas%d", num);
-+ err = ioctl(lastsock, ATM_NEWBACKENDIF, &ni);
-+
-+ if (err == 0)
-+ syslog(LOG_INFO,
-+ "Interface \"%s\" (mtu=%d, payload=%s) created sucessfully\n",
-+ ni.ifname, ni.mtu,ni.payload ? "bridged" : "routed");
-+ else
-+ syslog(LOG_INFO,
-+ "Interface \"%s\" could not be created, reason: %s\n",
-+ ni.ifname, strerror(errno));
-+ lastitf = num; /* even if we didn't create, because existed, assign_vcc wil want to know it! */
-+ } else {
-+ syslog(LOG_ERR, "err: strange interface number %d",
-+ num);
-+ }
-+ }
-+ return 0;
-+}
-+
-+
-+int assign_vcc(char *astr, int encap, int payload, int bufsize)
-+{
-+ int err, errno;
-+ struct atm_qos qos;
-+ struct sockaddr_atmpvc addr;
-+ int fd;
-+ struct atm_backend_br2684 be;
-+
-+ memset(&addr, 0, sizeof(addr));
-+ err =
-+ text2atm(astr, (struct sockaddr *) (&addr), sizeof(addr),
-+ T2A_PVC);
-+ if (err != 0)
-+ syslog(LOG_ERR,
-+ "Could not parse ATM parameters (error=%d)\n", err);
-+
-+#if 0
-+ addr.sap_family = AF_ATMPVC;
-+ addr.sap_addr.itf = itf;
-+ addr.sap_addr.vpi = 0;
-+ addr.sap_addr.vci = vci;
-+#endif
-+ syslog(LOG_INFO,
-+ "Communicating over ATM %d.%d.%d, encapsulation: %s\n",
-+ addr.sap_addr.itf, addr.sap_addr.vpi, addr.sap_addr.vci,
-+ encap ? "VC mux" : "LLC");
-+
-+ if ((fd = socket(PF_ATMPVC, SOCK_DGRAM, ATM_AAL5)) < 0)
-+ syslog(LOG_ERR, "failed to create socket %d, reason: %s",
-+ errno, strerror(errno));
-+
-+
-+ memset(&qos, 0, sizeof(qos));
-+ qos.aal = ATM_AAL5;
-+ qos.txtp.traffic_class = ATM_UBR;
-+ qos.txtp.max_sdu = 1524;
-+ qos.txtp.pcr = ATM_MAX_PCR;
-+ qos.rxtp = qos.txtp;
-+
-+ if ((err =
-+ setsockopt(fd, SOL_SOCKET, SO_SNDBUF, &bufsize,
-+ sizeof(bufsize))))
-+ syslog(LOG_ERR, "setsockopt SO_SNDBUF: (%d) %s\n", err,
-+ strerror(err));
-+
-+ if (setsockopt(fd, SOL_ATM, SO_ATMQOS, &qos, sizeof(qos)) < 0)
-+ syslog(LOG_ERR, "setsockopt SO_ATMQOS %d", errno);
-+
-+ err =
-+ connect(fd, (struct sockaddr *) &addr,
-+ sizeof(struct sockaddr_atmpvc));
-+
-+ if (err < 0)
-+ fatal("failed to connect on socket", err);
-+
-+ /* attach the vcc to device: */
-+
-+ be.backend_num = ATM_BACKEND_BR2684;
-+ be.ifspec.method = BR2684_FIND_BYIFNAME;
-+ sprintf(be.ifspec.spec.ifname, "nas%d", lastitf);
-+ be.fcs_in = BR2684_FCSIN_NO;
-+ be.fcs_out = BR2684_FCSOUT_NO;
-+ be.fcs_auto = 0;
-+ be.encaps = encap ? BR2684_ENCAPS_VC : BR2684_ENCAPS_LLC;
-+ be.payload = payload;
-+ be.has_vpiid = 0;
-+ be.send_padding = 0;
-+ be.min_size = 0;
-+ err = ioctl(fd, ATM_SETBACKEND, &be);
-+ if (err == 0)
-+ syslog(LOG_INFO, "Interface configured");
-+ else {
-+ syslog(LOG_ERR, "Could not configure interface:%s",
-+ strerror(errno));
-+ exit(2);
-+ }
-+ return fd;
-+}
-+
-+
-+
-+void usage(char *s)
-+{
-+ printf("usage: %s [-b] [[-c number] [-e 0|1] [-p 0|1] [-s num] [-a [itf.]vpi.vci]*]*\n"
-+ " -b = run in background (daemonize)\n"
-+ " -c <num> = use interface nas<num>\n"
-+ " -e 0|1 = encapsulation (0=LLC, 1=VC Mux)\n"
-+ " -p 0|1 = payload type (0=routed,1=bridged)\n"
-+ " -s <num> = set sndbuf (send buffer) size (default 8192)\n"
-+ " -a [itf.]vpi.vci = ATM interface no, VPI, VCI\n",
-+ s);
-+ exit(1);
-+}
-+
-+
-+
-+int main(int argc, char **argv)
-+{
-+ int c, background = 0, encap = 0, sndbuf = 8192, payload = 1;
-+ char *itfnum = NULL;
-+
-+ lastsock = -1;
-+ lastitf = 0;
-+
-+ openlog(LOG_NAME, LOG_OPTION, LOG_FACILITY);
-+ if (argc > 1)
-+ while ((c = getopt(argc, argv, "a:bc:e:s:p:t:?h")) != EOF)
-+ switch (c) {
-+ case 'a':
-+ assign_vcc(optarg, encap, payload, sndbuf);
-+ break;
-+ case 'b':
-+ background = 1;
-+ break;
-+ case 'c':
-+ create_br(optarg, payload);
-+ itfnum = strdup(optarg);
-+ break;
-+ case 'e':
-+ encap = (atoi(optarg));
-+ if (encap < 0) {
-+ syslog(LOG_ERR,
-+ "invalid encapsulation: %s:\n",
-+ optarg);
-+ encap = 0;
-+ }
-+ break;
-+ case 's':
-+ sndbuf = (atoi(optarg));
-+ if (sndbuf < 0) {
-+ syslog(LOG_ERR,
-+ "Invalid sndbuf: %s, using size of 8192 instead\n",
-+ optarg);
-+ sndbuf = 8192;
-+ }
-+ break;
-+ case 'p': /* payload type: routed (0) or bridged (1) */
-+ payload = atoi(optarg);
-+ break;
-+ case '?':
-+ case 'h':
-+ default:
-+ usage(argv[0]);
-+ } else
-+ usage(argv[0]);
-+
-+ if (argc != optind)
-+ usage(argv[0]);
-+
-+ if (lastsock >= 0)
-+ close(lastsock);
-+
-+ if (background) {
-+ pid_t pid;
-+
-+ pid = fork();
-+ if (pid < 0) {
-+ fprintf(stderr, "Error detaching\n");
-+ exit(2);
-+ } else if (pid)
-+ exit(0); // This is the parent
-+
-+ // Become a process group and session group leader
-+ if (setsid() < 0) {
-+ fprintf(stderr, "Could not set process group\n");
-+ exit(2);
-+ }
-+ // Fork again to let process group leader exit
-+ pid = fork();
-+ if (pid < 0) {
-+ fprintf(stderr,
-+ "Error detaching during second fork\n");
-+ exit(2);
-+ } else if (pid)
-+ exit(0); // This is the parent
-+
-+ // Now we're ready for buisness
-+ chdir("/"); // Don't keep directories in use
-+ close(0);
-+ close(1);
-+ close(2); // Close stdin, -out and -error
-+ /*
-+ Note that this implementation does not keep an open
-+ stdout/err.
-+ If we need them they can be opened now
-+ */
-+
-+ }
-+
-+ if (itfnum != NULL) {
-+ create_pidfile(itfnum);
-+ free(itfnum);
-+ }
-+
-+ syslog(LOG_INFO, "RFC 1483/2684 bridge daemon started\n");
-+ atexit(exitFunc);
-+
-+ while (1)
-+ sleep(30); /* to keep the sockets... */
-+ return 0;
-+}
diff --git a/package/linux-atm/patches/100-subdirs.patch b/package/linux-atm/patches/100-subdirs.patch
new file mode 100644
index 000000000..073f68bd3
--- /dev/null
+++ b/package/linux-atm/patches/100-subdirs.patch
@@ -0,0 +1,161 @@
+diff -ruN linux-atm-2.4.1/configure.in linux-atm-2.4.1.new/configure.in
+--- linux-atm-2.4.1/configure.in 2003-04-25 04:17:05.000000000 +0200
++++ linux-atm-2.4.1.new/configure.in 2005-07-27 15:45:49.532396543 +0200
+@@ -153,26 +153,5 @@
+ src/Makefile \
+ src/include/Makefile \
+ src/lib/Makefile \
+- src/test/Makefile \
+- src/debug/Makefile \
+- src/qgen/Makefile \
+- src/saal/Makefile \
+- src/sigd/Makefile \
+- src/maint/Makefile \
+- src/arpd/Makefile \
+- src/ilmid/Makefile \
+- src/ilmid/asn1/Makefile \
+- src/man/Makefile \
+- src/led/Makefile \
+- src/lane/Makefile \
+- src/mpoad/Makefile \
+- src/switch/Makefile \
+- src/switch/debug/Makefile \
+- src/switch/tcp/Makefile \
+- src/config/Makefile \
+- src/config/init-redhat/Makefile \
+- src/extra/Makefile \
+- src/extra/linux-atm.spec \
+- src/extra/ANS/Makefile
+ )
+
+diff -ruN linux-atm-2.4.1/src/Makefile.am linux-atm-2.4.1.new/src/Makefile.am
+--- linux-atm-2.4.1/src/Makefile.am 2001-10-03 23:14:53.000000000 +0200
++++ linux-atm-2.4.1.new/src/Makefile.am 2005-07-27 15:33:52.389309711 +0200
+@@ -1,3 +1,2 @@
+-SUBDIRS = include lib test debug qgen saal sigd maint arpd ilmid man led lane \
+- mpoad switch config extra
++SUBDIRS = include lib
+
+
+diff -Nur linux-atm-2.4.1.orig/src/include/linux/atmbr2684.h linux-atm-2.4.1/src/include/linux/atmbr2684.h
+--- linux-atm-2.4.1.orig/src/include/linux/atmbr2684.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-atm-2.4.1/src/include/linux/atmbr2684.h 2005-11-13 00:06:42.000000000 +0100
+@@ -0,0 +1,117 @@
++#ifndef _LINUX_ATMBR2684_H
++#define _LINUX_ATMBR2684_H
++
++#include <linux/atm.h>
++#include <linux/if.h> /* For IFNAMSIZ */
++#include <linux/if_ether.h> /* ETH_P_* */
++
++/*
++ * Type of media we're bridging (ethernet, token ring, etc) Currently only
++ * ethernet is supported
++ */
++#define BR2684_MEDIA_ETHERNET (0) /* 802.3 */
++#define BR2684_MEDIA_802_4 (1) /* 802.4 */
++#define BR2684_MEDIA_TR (2) /* 802.5 - token ring */
++#define BR2684_MEDIA_FDDI (3)
++#define BR2684_MEDIA_802_6 (4) /* 802.6 */
++
++/*
++ * Is there FCS inbound on this VC? This currently isn't supported.
++ */
++#define BR2684_FCSIN_NO (0)
++#define BR2684_FCSIN_IGNORE (1)
++#define BR2684_FCSIN_VERIFY (2)
++
++/*
++ * Is there FCS outbound on this VC? This currently isn't supported.
++ */
++#define BR2684_FCSOUT_NO (0)
++#define BR2684_FCSOUT_SENDZERO (1)
++#define BR2684_FCSOUT_GENERATE (2)
++
++/*
++ * Does this VC include LLC encapsulation?
++ */
++#define BR2684_ENCAPS_VC (0) /* VC-mux */
++#define BR2684_ENCAPS_LLC (1)
++#define BR2684_ENCAPS_AUTODETECT (2) /* Unsuported */
++
++/*
++ * Is this VC bridged or routed?
++ */
++
++#define BR2684_PAYLOAD_ROUTED (0)
++#define BR2684_PAYLOAD_BRIDGED (1)
++
++
++/*
++ * This is for the ATM_NEWBACKENDIF call - these are like socket families:
++ * the first element of the structure is the backend number and the rest
++ * is per-backend specific
++ */
++struct atm_newif_br2684 {
++ atm_backend_t backend_num; /* ATM_BACKEND_BR2684 */
++ int media; /* BR2684_MEDIA_* */
++ char ifname[IFNAMSIZ];
++ int mtu;
++ int payload; /* bridged or routed */
++};
++
++/*
++ * This structure is used to specify a br2684 interface - either by a
++ * positive integer (returned by ATM_NEWBACKENDIF) or the interfaces name
++ */
++#define BR2684_FIND_BYNOTHING (0)
++#define BR2684_FIND_BYNUM (1)
++#define BR2684_FIND_BYIFNAME (2)
++struct br2684_if_spec {
++ int method; /* BR2684_FIND_* */
++ union {
++ char ifname[IFNAMSIZ];
++ int devnum;
++ } spec;
++};
++
++/*
++ * This is for the ATM_SETBACKEND call - these are like socket families:
++ * the first element of the structure is the backend number and the rest
++ * is per-backend specific
++ */
++struct atm_backend_br2684 {
++ atm_backend_t backend_num; /* ATM_BACKEND_BR2684 */
++ struct br2684_if_spec ifspec;
++ int fcs_in; /* BR2684_FCSIN_* */
++ int fcs_out; /* BR2684_FCSOUT_* */
++ int fcs_auto; /* 1: fcs_{in,out} disabled if no FCS rx'ed */
++ int encaps; /* BR2684_ENCAPS_* */
++ int payload; /* BR2684_PAYLOAD_* */
++ int has_vpiid; /* 1: use vpn_id - Unsupported */
++ __u8 vpn_id[7];
++ int send_padding; /* unsupported */
++ int min_size; /* we will pad smaller packets than this */
++};
++
++/*
++ * The BR2684_SETFILT ioctl is an experimental mechanism for folks
++ * terminating a large number of IP-only vcc's. When netfilter allows
++ * efficient per-if in/out filters, this support will be removed
++ */
++struct br2684_filter {
++ __u32 prefix; /* network byte order */
++ __u32 netmask; /* 0 = disable filter */
++};
++
++struct br2684_filter_set {
++ struct br2684_if_spec ifspec;
++ struct br2684_filter filter;
++};
++
++enum br2684_payload {
++ p_routed = BR2684_PAYLOAD_ROUTED,
++ p_bridged = BR2684_PAYLOAD_BRIDGED,
++};
++
++#define BR2684_SETFILT _IOW( 'a', ATMIOC_BACKEND + 0, \
++ struct br2684_filter_set)
++
++#endif /* _LINUX_ATMBR2684_H */
+
diff --git a/package/linux-atm/patches/300-no_autotools.patch b/package/linux-atm/patches/300-no_autotools.patch
index 73427296c..1b9be11ec 100644
--- a/package/linux-atm/patches/300-no_autotools.patch
+++ b/package/linux-atm/patches/300-no_autotools.patch
@@ -11160,7 +11160,7 @@ diff -urN linux-atm.old/configure linux-atm.dev/configure
- ac_config_files="$ac_config_files Makefile doc/Makefile m4/Makefile src/Makefile src/include/Makefile src/lib/Makefile src/test/Makefile src/debug/Makefile src/qgen/Makefile src/saal/Makefile src/sigd/Makefile src/maint/Makefile src/arpd/Makefile src/ilmid/Makefile src/ilmid/asn1/Makefile src/man/Makefile src/led/Makefile src/lane/Makefile src/mpoad/Makefile src/switch/Makefile src/switch/debug/Makefile src/switch/tcp/Makefile src/config/Makefile src/config/init-redhat/Makefile src/extra/Makefile src/extra/linux-atm.spec src/extra/ANS/Makefile"
-+ ac_config_files="$ac_config_files Makefile doc/Makefile m4/Makefile src/Makefile src/include/Makefile src/lib/Makefile src/br2684/Makefile"
++ ac_config_files="$ac_config_files Makefile doc/Makefile m4/Makefile src/Makefile src/include/Makefile src/lib/Makefile"
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
@@ -11283,7 +11283,7 @@ diff -urN linux-atm.old/configure linux-atm.dev/configure
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
srcdir=$srcdir
-@@ -9080,27 +9367,7 @@
+@@ -9080,27 +9367,6 @@
"src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
"src/include/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/include/Makefile" ;;
"src/lib/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/lib/Makefile" ;;
@@ -11308,7 +11308,6 @@ diff -urN linux-atm.old/configure linux-atm.dev/configure
- "src/extra/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/extra/Makefile" ;;
- "src/extra/linux-atm.spec" ) CONFIG_FILES="$CONFIG_FILES src/extra/linux-atm.spec" ;;
- "src/extra/ANS/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/extra/ANS/Makefile" ;;
-+ "src/br2684/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/br2684/Makefile" ;;
"default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;;
"config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
*) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
@@ -11855,39 +11854,6 @@ diff -urN linux-atm.old/Makefile.in linux-atm.dev/Makefile.in
STRIP = @STRIP@
VERSION = @VERSION@
YACC = @YACC@
-diff -urN linux-atm.old/src/br2684/Makefile.in linux-atm.dev/src/br2684/Makefile.in
---- linux-atm.old/src/br2684/Makefile.in 2005-08-23 01:12:10.884781000 +0200
-+++ linux-atm.dev/src/br2684/Makefile.in 2005-08-23 01:12:46.632347232 +0200
-@@ -57,11 +57,15 @@
- NORMAL_UNINSTALL = :
- PRE_UNINSTALL = :
- POST_UNINSTALL = :
-+build_alias = @build_alias@
-+build_triplet = @build@
- host_alias = @host_alias@
- host_triplet = @host@
-+target_alias = @target_alias@
-+target_triplet = @target@
- AR = @AR@
- AS = @AS@
--CC = /usr/src/openwrt/staging_dir_mipsel/bin/mipsel-linux-gcc
-+CC = @CC@
- CXX = @CXX@
- CXXCPP = @CXXCPP@
- DLLTOOL = @DLLTOOL@
-@@ -117,9 +121,9 @@
- br2684ctl_DEPENDENCIES = $(top_builddir)/src/lib/libatm.la
- br2684ctl_LDFLAGS =
- CFLAGS = @CFLAGS@
--COMPILE = $(TARGET_CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
--LTCOMPILE = $(LIBTOOL) --mode=compile $(TARGET_CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
--CCLD = $(TARGET_CC)
-+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-+LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-+CCLD = $(CC)
- LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
- man8dir = $(mandir)/man8
- MANS = $(man_MANS)
diff -urN linux-atm.old/src/include/Makefile.in linux-atm.dev/src/include/Makefile.in
--- linux-atm.old/src/include/Makefile.in 2005-08-23 01:12:10.851786000 +0200
+++ linux-atm.dev/src/include/Makefile.in 2005-08-23 01:12:46.585354376 +0200
@@ -12008,7 +11974,7 @@ diff -urN linux-atm.old/src/Makefile.in linux-atm.dev/src/Makefile.in
-SUBDIRS = include lib
-
-+SUBDIRS = include lib br2684
++SUBDIRS = include lib
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = ../config.h
CONFIG_CLEAN_FILES =