diff options
Diffstat (limited to 'package/ifxmips-atm/src/ppe.c')
| -rw-r--r-- | package/ifxmips-atm/src/ppe.c | 838 |
1 files changed, 838 insertions, 0 deletions
diff --git a/package/ifxmips-atm/src/ppe.c b/package/ifxmips-atm/src/ppe.c new file mode 100644 index 000000000..65e4be9c6 --- /dev/null +++ b/package/ifxmips-atm/src/ppe.c @@ -0,0 +1,838 @@ +#include <asm/mach-ifxmips/cgu.h> +#include "common.h" + +#include "ifx_ppe_fw.h" +static void set_qsb(struct atm_vcc *vcc, struct atm_qos *qos, unsigned int connection) +{ + + u32 qsb_clk = cgu_get_fpi_bus_clock(2); /* FPI configuration 2 (slow FPI bus) */ + union qsb_queue_parameter_table qsb_queue_parameter_table = {{0}}; + union qsb_queue_vbr_parameter_table qsb_queue_vbr_parameter_table = {{0}}; + u32 tmp; + + /* + * Peak Cell Rate (PCR) Limiter + */ + if ( qos->txtp.max_pcr == 0 ) + qsb_queue_parameter_table.bit.tp = 0; /* disable PCR limiter */ + else + { + /* peak cell rate would be slightly lower than requested [maximum_rate / pcr = (qsb_clock / 8) * (time_step / 4) / pcr] */ + tmp = ((qsb_clk * ppe_dev.qsb.tstepc) >> 5) / qos->txtp.max_pcr + 1; + /* check if overflow takes place */ + qsb_queue_parameter_table.bit.tp = tmp > QSB_TP_TS_MAX ? QSB_TP_TS_MAX : tmp; + } + /* + * Weighted Fair Queueing Factor (WFQF) + */ + switch ( qos->txtp.traffic_class ) + { + case ATM_CBR: + case ATM_VBR_RT: + /* real time queue gets weighted fair queueing bypass */ + qsb_queue_parameter_table.bit.wfqf = 0; + break; + case ATM_VBR_NRT: + case ATM_UBR_PLUS: + /* WFQF calculation here is based on virtual cell rates, to reduce granularity for high rates */ + /* WFQF is maximum cell rate / garenteed cell rate */ + /* wfqf = qsb_minimum_cell_rate * QSB_WFQ_NONUBR_MAX / requested_minimum_peak_cell_rate */ + if ( qos->txtp.min_pcr == 0 ) + qsb_queue_parameter_table.bit.wfqf = QSB_WFQ_NONUBR_MAX; + else + { + tmp = QSB_GCR_MIN * QSB_WFQ_NONUBR_MAX / qos->txtp.min_pcr; + if ( tmp == 0 ) + qsb_queue_parameter_table.bit.wfqf = 1; + else if ( tmp > QSB_WFQ_NONUBR_MAX ) + qsb_queue_parameter_table.bit.wfqf = QSB_WFQ_NONUBR_MAX; + else + qsb_queue_parameter_table.bit.wfqf = tmp; + } + break; + default: + case ATM_UBR: + qsb_queue_parameter_table.bit.wfqf = QSB_WFQ_UBR_BYPASS; + } + /* + * Sustained Cell Rate (SCR) Leaky Bucket Shaper VBR.0/VBR.1 + */ + if ( qos->txtp.traffic_class == ATM_VBR_RT || qos->txtp.traffic_class == ATM_VBR_NRT ) + { + if ( qos->txtp.scr == 0 ) + { + /* disable shaper */ + qsb_queue_vbr_parameter_table.bit.taus = 0; + qsb_queue_vbr_parameter_table.bit.ts = 0; + } + else + { + /* Cell Loss Priority (CLP) */ + if ( (vcc->atm_options & ATM_ATMOPT_CLP) ) + /* CLP1 */ + qsb_queue_parameter_table.bit.vbr = 1; + else + /* CLP0 */ + qsb_queue_parameter_table.bit.vbr = 0; + /* Rate Shaper Parameter (TS) and Burst Tolerance Parameter for SCR (tauS) */ + tmp = ((qsb_clk * ppe_dev.qsb.tstepc) >> 5) / qos->txtp.scr + 1; + qsb_queue_vbr_parameter_table.bit.ts = tmp > QSB_TP_TS_MAX ? QSB_TP_TS_MAX : tmp; + tmp = (qos->txtp.mbs - 1) * (qsb_queue_vbr_parameter_table.bit.ts - qsb_queue_parameter_table.bit.tp) / 64; + if ( tmp == 0 ) + qsb_queue_vbr_parameter_table.bit.taus = 1; + else if ( tmp > QSB_TAUS_MAX ) + qsb_queue_vbr_parameter_table.bit.taus = QSB_TAUS_MAX; + else + qsb_queue_vbr_parameter_table.bit.taus = tmp; + } + } + else + { + qsb_queue_vbr_parameter_table.bit.taus = 0; + qsb_queue_vbr_parameter_table.bit.ts = 0; + } + + /* Queue Parameter Table (QPT) */ + *QSB_RTM = QSB_RTM_DM_SET(QSB_QPT_SET_MASK); + *QSB_RTD = QSB_RTD_TTV_SET(qsb_queue_parameter_table.dword); + *QSB_RAMAC = QSB_RAMAC_RW_SET(QSB_RAMAC_RW_WRITE) | QSB_RAMAC_TSEL_SET(QSB_RAMAC_TSEL_QPT) | QSB_RAMAC_LH_SET(QSB_RAMAC_LH_LOW) | QSB_RAMAC_TESEL_SET(connection); + /* Queue VBR Paramter Table (QVPT) */ + *QSB_RTM = QSB_RTM_DM_SET(QSB_QVPT_SET_MASK); + *QSB_RTD = QSB_RTD_TTV_SET(qsb_queue_vbr_parameter_table.dword); + *QSB_RAMAC = QSB_RAMAC_RW_SET(QSB_RAMAC_RW_WRITE) | QSB_RAMAC_TSEL_SET(QSB_RAMAC_TSEL_VBR) | QSB_RAMAC_LH_SET(QSB_RAMAC_LH_LOW) | QSB_RAMAC_TESEL_SET(connection); + +} + + +static inline void u64_add_u32(ppe_u64_t opt1, u32 opt2,ppe_u64_t *ret) +{ + ret->l = opt1.l + opt2; + if ( ret->l < opt1.l || ret->l < opt2 ) + ret->h++; +} + +int find_vcc(struct atm_vcc *vcc) +{ + int i; + struct connection *connection = ppe_dev.connection; + int max_connections = ppe_dev.port[(int)vcc->dev->dev_data].max_connections; + u32 occupation_table = ppe_dev.port[(int)vcc->dev->dev_data].connection_table; + int base = ppe_dev.port[(int)vcc->dev->dev_data].connection_base; + for ( i = 0; i < max_connections; i++, base++ ) + if ( (occupation_table & (1 << i)) + && connection[base].vcc == vcc ) + return base; + return -1; +} + +int find_vpi(unsigned int vpi) +{ + int i, j; + struct connection *connection = ppe_dev.connection; + struct port *port; + int base; + + port = ppe_dev.port; + for ( i = 0; i < ATM_PORT_NUMBER; i++, port++ ) + { + base = port->connection_base; + for ( j = 0; j < port->max_connections; j++, base++ ) + if ( (port->connection_table & (1 << j)) + && connection[base].vcc != NULL + && vpi == connection[base].vcc->vpi ) + return base; + } + return -1; +} + +int find_vpivci(unsigned int vpi, unsigned int vci) +{ + int i, j; + struct connection *connection = ppe_dev.connection; + struct port *port; + int base; + + port = ppe_dev.port; + for ( i = 0; i < ATM_PORT_NUMBER; i++, port++ ) + { + base = port->connection_base; + for ( j = 0; j < port->max_connections; j++, base++ ) + if ( (port->connection_table & (1 << j)) + && connection[base].vcc != NULL + && vpi == connection[base].vcc->vpi + && vci == connection[base].vcc->vci ) + return base; + } + return -1; +} + + +static inline void clear_htu_entry(unsigned int connection) +{ + HTU_ENTRY(connection - QSB_QUEUE_NUMBER_BASE + OAM_HTU_ENTRY_NUMBER)->vld = 0; +} + +static inline void set_htu_entry(unsigned int vpi, unsigned int vci, unsigned int connection, int aal5) +{ + struct htu_entry htu_entry = { res1: 0x00, + pid: ppe_dev.connection[connection].port & 0x01, + vpi: vpi, + vci: vci, + pti: 0x00, + vld: 0x01}; + + struct htu_mask htu_mask = { set: 0x03, + pid_mask: 0x02, + vpi_mask: 0x00, + vci_mask: 0x0000, + pti_mask: 0x03, // 0xx, user data + clear: 0x00}; + + struct htu_result htu_result = {res1: 0x00, + cellid: connection, + res2: 0x00, + type: aal5 ? 0x00 : 0x01, + ven: 0x01, + res3: 0x00, + qid: connection}; + + *HTU_RESULT(connection - QSB_QUEUE_NUMBER_BASE + OAM_HTU_ENTRY_NUMBER) = htu_result; + *HTU_MASK(connection - QSB_QUEUE_NUMBER_BASE + OAM_HTU_ENTRY_NUMBER) = htu_mask; + *HTU_ENTRY(connection - QSB_QUEUE_NUMBER_BASE + OAM_HTU_ENTRY_NUMBER) = htu_entry; +} + +int alloc_tx_connection(int connection) +{ + unsigned long sys_flag; + int desc_base; + + if ( ppe_dev.dma.tx_desc_alloc_pos[connection] == ppe_dev.dma.tx_desc_release_pos[connection] && ppe_dev.dma.tx_desc_alloc_flag[connection] ) + return -1; + + /* amend descriptor pointer and allocation number */ + local_irq_save(sys_flag); + desc_base = ppe_dev.dma.tx_descriptor_number * (connection - QSB_QUEUE_NUMBER_BASE) + ppe_dev.dma.tx_desc_alloc_pos[connection]; + if ( ++ppe_dev.dma.tx_desc_alloc_pos[connection] == ppe_dev.dma.tx_descriptor_number ) + ppe_dev.dma.tx_desc_alloc_pos[connection] = 0; + ppe_dev.dma.tx_desc_alloc_flag[connection] = 1; + local_irq_restore(sys_flag); + + return desc_base; +} + + +int ppe_open(struct atm_vcc *vcc) +{ + int ret; + struct port *port = &ppe_dev.port[(int)vcc->dev->dev_data]; + int conn; + int f_enable_irq = 0; + int i; +printk("%s:%s[%d] removed 2 args from signature\n", __FILE__, __func__, __LINE__); + +printk("ppe_open"); + + if ( vcc->qos.aal != ATM_AAL5 && vcc->qos.aal != ATM_AAL0 ) + return -EPROTONOSUPPORT; + + down(&ppe_dev.sem); + + /* check bandwidth */ + if ( (vcc->qos.txtp.traffic_class == ATM_CBR && vcc->qos.txtp.max_pcr > (port->tx_max_cell_rate - port->tx_current_cell_rate)) + || (vcc->qos.txtp.traffic_class == ATM_VBR_RT && vcc->qos.txtp.max_pcr > (port->tx_max_cell_rate - port->tx_current_cell_rate)) + || (vcc->qos.txtp.traffic_class == ATM_VBR_NRT && vcc->qos.txtp.pcr > (port->tx_max_cell_rate - port->tx_current_cell_rate)) + || (vcc->qos.txtp.traffic_class == ATM_UBR_PLUS && vcc->qos.txtp.min_pcr > (port->tx_max_cell_rate - port->tx_current_cell_rate)) ) + { + ret = -EINVAL; + goto PPE_OPEN_EXIT; + } + + printk("alloc vpi = %d, vci = %d\n", vcc->vpi, vcc->vci); + + /* check existing vpi,vci */ + conn = find_vpivci(vcc->vpi, vcc->vci); + if ( conn >= 0 ) + { + ret = -EADDRINUSE; + goto PPE_OPEN_EXIT; + } + + /* check whether it need to enable irq */ + for ( i = 0; i < ATM_PORT_NUMBER; i++ ) + if ( ppe_dev.port[i].max_connections != 0 && ppe_dev.port[i].connection_table != 0 ) + break; + if ( i == ATM_PORT_NUMBER ) + f_enable_irq = 1; + + /* allocate connection */ + for ( i = 0, conn = port->connection_base; i < port->max_connections; i++, conn++ ) + if ( !(port->connection_table & (1 << i)) ) + { + port->connection_table |= 1 << i; + ppe_dev.connection[conn].vcc = vcc; + break; + } + if ( i == port->max_connections ) + { + ret = -EINVAL; + goto PPE_OPEN_EXIT; + } + +#if defined(ENABLE_RX_QOS) && ENABLE_RX_QOS + /* assign DMA channel and setup weight value for RX QoS */ + switch ( vcc->qos.rxtp.traffic_class ) + { + case ATM_CBR: + ppe_dev.connection[conn].rx_dma_channel = RX_DMA_CH_CBR; + break; + case ATM_VBR_RT: + ppe_dev.connection[conn].rx_dma_channel = RX_DMA_CH_VBR_RT; + ppe_dev.dma.rx_default_weight[RX_DMA_CH_VBR_RT] += vcc->qos.rxtp.max_pcr; + ppe_dev.dma.rx_weight[RX_DMA_CH_VBR_RT] += vcc->qos.rxtp.max_pcr; + break; + case ATM_VBR_NRT: + ppe_dev.connection[conn].rx_dma_channel = RX_DMA_CH_VBR_NRT; + ppe_dev.dma.rx_default_weight[RX_DMA_CH_VBR_NRT] += vcc->qos.rxtp.pcr; + ppe_dev.dma.rx_weight[RX_DMA_CH_VBR_NRT] += vcc->qos.rxtp.pcr; + break; + case ATM_ABR: + ppe_dev.connection[conn].rx_dma_channel = RX_DMA_CH_AVR; + ppe_dev.dma.rx_default_weight[RX_DMA_CH_AVR] += vcc->qos.rxtp.min_pcr; + ppe_dev.dma.rx_weight[RX_DMA_CH_AVR] += vcc->qos.rxtp.min_pcr; + break; + case ATM_UBR_PLUS: + default: + ppe_dev.connection[conn].rx_dma_channel = RX_DMA_CH_UBR; + break; + } + + /* update RX queue configuration table */ + WRX_QUEUE_CONFIG(conn)->dmach = ppe_dev.connection[conn].rx_dma_channel; + + printk("ppe_open: QID %d, DMA %d\n", conn, WRX_QUEUE_CONFIG(conn)->dmach); + + printk("conn = %d, dmach = %d", conn, WRX_QUEUE_CONFIG(conn)->dmach); +#endif // defined(ENABLE_RX_QOS) && ENABLE_RX_QOS + + /* reserve bandwidth */ + switch ( vcc->qos.txtp.traffic_class ) + { + case ATM_CBR: + case ATM_VBR_RT: + port->tx_current_cell_rate += vcc->qos.txtp.max_pcr; + break; + case ATM_VBR_NRT: + port->tx_current_cell_rate += vcc->qos.txtp.pcr; + break; + case ATM_UBR_PLUS: + port->tx_current_cell_rate += vcc->qos.txtp.min_pcr; + break; + } + + /* set qsb */ + set_qsb(vcc, &vcc->qos, conn); + + /* update atm_vcc structure */ + vcc->itf = (int)vcc->dev->dev_data; + + set_bit(ATM_VF_READY, &vcc->flags); + + /* enable irq */ + printk("ppe_open: enable_irq\n"); + if ( f_enable_irq ) + enable_irq(IFXMIPS_PPE_MBOX_INT); + + /* enable mailbox */ + *MBOX_IGU1_ISRC = (1 << conn) | (1 << (conn + 16)); + *MBOX_IGU1_IER |= (1 << conn) | (1 << (conn + 16)); + *MBOX_IGU3_ISRC = (1 << conn) | (1 << (conn + 16)); + *MBOX_IGU3_IER |= (1 << conn) | (1 << (conn + 16)); + + /* set htu entry */ + set_htu_entry(vcc->vpi, vcc->vci, conn, vcc->qos.aal == ATM_AAL5 ? 1 : 0); + + ret = 0; + + printk("ppe_open(%d.%d): conn = %d, ppe_dev.dma = %08X\n", vcc->vpi, vcc->vci, conn, (u32)&ppe_dev.dma.rx_descriptor_number); + + +PPE_OPEN_EXIT: + up(&ppe_dev.sem); + + printk("open ATM itf = %d, vpi = %d, vci = %d, ret = %d", (int)vcc->dev->dev_data, (int)vcc->vpi, vcc->vci, ret); + return ret; +} + +void ppe_close(struct atm_vcc *vcc) +{ + int conn; + struct port *port; + struct connection *connection; + int i; + + if ( vcc == NULL ) + return; + + down(&ppe_dev.sem); + + /* get connection id */ + conn = find_vcc(vcc); + if ( conn < 0 ) + { + printk("can't find vcc\n"); + goto PPE_CLOSE_EXIT; + } + if(!((Atm_Priv *)vcc)->on) + goto PPE_CLOSE_EXIT; + connection = &ppe_dev.connection[conn]; + port = &ppe_dev.port[connection->port]; + + /* clear htu */ + clear_htu_entry(conn); + + /* release connection */ + port->connection_table &= ~(1 << (conn - port->connection_base)); + connection->vcc = NULL; + connection->access_time.tv_sec = 0; + connection->access_time.tv_nsec = 0; + connection->aal5_vcc_crc_err = 0; + connection->aal5_vcc_oversize_sdu = 0; + + /* disable irq */ + for ( i = 0; i < ATM_PORT_NUMBER; i++ ) + if ( ppe_dev.port[i].max_connections != 0 && ppe_dev.port[i].connection_table != 0 ) + break; + if ( i == ATM_PORT_NUMBER ) + disable_irq(IFXMIPS_PPE_MBOX_INT); + + *MBOX_IGU1_ISRC = (1 << conn) | (1 << (conn + 16)); + +#if defined(ENABLE_RX_QOS) && ENABLE_RX_QOS + /* remove weight value from RX DMA channel */ + switch ( vcc->qos.rxtp.traffic_class ) + { + case ATM_VBR_RT: + ppe_dev.dma.rx_default_weight[RX_DMA_CH_VBR_RT] -= vcc->qos.rxtp.max_pcr; + if ( ppe_dev.dma.rx_weight[RX_DMA_CH_VBR_RT] > ppe_dev.dma.rx_default_weight[RX_DMA_CH_VBR_RT] ) + ppe_dev.dma.rx_weight[RX_DMA_CH_VBR_RT] = ppe_dev.dma.rx_default_weight[RX_DMA_CH_VBR_RT]; + break; + case ATM_VBR_NRT: + ppe_dev.dma.rx_default_weight[RX_DMA_CH_VBR_NRT] -= vcc->qos.rxtp.pcr; + if ( ppe_dev.dma.rx_weight[RX_DMA_CH_VBR_NRT] > ppe_dev.dma.rx_default_weight[RX_DMA_CH_VBR_NRT] ) + ppe_dev.dma.rx_weight[RX_DMA_CH_VBR_NRT] = ppe_dev.dma.rx_default_weight[RX_DMA_CH_VBR_NRT]; + break; + case ATM_ABR: + ppe_dev.dma.rx_default_weight[RX_DMA_CH_AVR] -= vcc->qos.rxtp.min_pcr; + if ( ppe_dev.dma.rx_weight[RX_DMA_CH_AVR] > ppe_dev.dma.rx_default_weight[RX_DMA_CH_AVR] ) + ppe_dev.dma.rx_weight[RX_DMA_CH_AVR] = ppe_dev.dma.rx_default_weight[RX_DMA_CH_AVR]; + break; + case ATM_CBR: + case ATM_UBR_PLUS: + default: + break; + } +#endif // defined(ENABLE_RX_QOS) && ENABLE_RX_QOS + + /* release bandwidth */ + switch ( vcc->qos.txtp.traffic_class ) + { + case ATM_CBR: + case ATM_VBR_RT: + port->tx_current_cell_rate -= vcc->qos.txtp.max_pcr; + break; + case ATM_VBR_NRT: + port->tx_current_cell_rate -= vcc->qos.txtp.pcr; + break; + case ATM_UBR_PLUS: + port->tx_current_cell_rate -= vcc->qos.txtp.min_pcr; + break; + } + + /* idle for a while to let parallel operation finish */ + for ( i = 0; i < IDLE_CYCLE_NUMBER; i++ ); + ((Atm_Priv *)vcc)->on = 0; + +PPE_CLOSE_EXIT: + up(&ppe_dev.sem); +} + +int ppe_ioctl(struct atm_dev *dev, unsigned int cmd, void *arg) +{ + return -ENOTTY; +} + +int ppe_send(struct atm_vcc *vcc, struct sk_buff *skb) +{ + int ret; + int conn; + int desc_base; + register struct tx_descriptor reg_desc; + struct tx_descriptor *desc; + + +printk("ppe_send"); +printk("ppe_send\n"); +printk("skb->users = %d\n", skb->users.counter); + + if ( vcc == NULL || skb == NULL ) + return -EINVAL; + +// down(&ppe_dev.sem); + + ATM_SKB(skb)->vcc = vcc; + conn = find_vcc(vcc); +// if ( conn != 1 ) +printk("ppe_send: conn = %d\n", conn); + if ( conn < 0 ) + { + ret = -EINVAL; + goto FIND_VCC_FAIL; + } + +printk("find_vcc"); + + if ( vcc->qos.aal == ATM_AAL5 ) + { + int byteoff; + int datalen; + struct tx_inband_header *header; + + /* allocate descriptor */ + desc_base = alloc_tx_connection(conn); + if ( desc_base < 0 ) + { + ret = -EIO; + //goto ALLOC_TX_CONNECTION_FAIL; + } + desc = &ppe_dev.dma.tx_descriptor_base[desc_base]; + + /* load descriptor from memory */ + reg_desc = *desc; + + datalen = skb->len; + byteoff = (u32)skb->data & (DMA_ALIGNMENT - 1); + if ( skb_headroom(skb) < byteoff + TX_INBAND_HEADER_LENGTH ) + { + struct sk_buff *new_skb; + +printk("skb_headroom(skb) < byteoff + TX_INBAND_HEADER_LENGTH"); +printk("skb_headroom(skb 0x%08X, skb->data 0x%08X) (%d) < byteoff (%d) + TX_INBAND_HEADER_LENGTH (%d)\n", (u32)skb, (u32)skb->data, skb_headroom(skb), byteoff, TX_INBAND_HEADER_LENGTH); + + new_skb = alloc_skb_tx(datalen); + if ( new_skb == NULL ) + { + printk("alloc_skb_tx: fail\n"); + ret = -ENOMEM; + goto ALLOC_SKB_TX_FAIL; + } + ATM_SKB(new_skb)->vcc = NULL; + skb_put(new_skb, datalen); + memcpy(new_skb->data, skb->data, datalen); + atm_free_tx_skb_vcc(skb); + skb = new_skb; + byteoff = (u32)skb->data & (DMA_ALIGNMENT - 1); + } + else + { +printk("skb_headroom(skb) >= byteoff + TX_INBAND_HEADER_LENGTH"); + } +printk("before skb_push, skb->data = 0x%08X", (u32)skb->data); + skb_push(skb, byteoff + TX_INBAND_HEADER_LENGTH); +printk("after skb_push, skb->data = 0x%08X", (u32)skb->data); + + header = (struct tx_inband_header *)(u32)skb->data; +printk("header = 0x%08X", (u32)header); + + /* setup inband trailer */ + header->uu = 0; + header->cpi = 0; + header->pad = ppe_dev.aal5.padding_byte; + header->res1 = 0; + + /* setup cell header */ + header->clp = (vcc->atm_options & ATM_ATMOPT_CLP) ? 1 : 0; + header->pti = ATM_PTI_US0; + header->vci = vcc->vci; + header->vpi = vcc->vpi; + header->gfc = 0; + + /* setup descriptor */ + reg_desc.dataptr = (u32)skb->data >> 2; + reg_desc.datalen = datalen; + reg_desc.byteoff = byteoff; + reg_desc.iscell = 0; + +printk("setup header, datalen = %d, byteoff = %d", reg_desc.datalen, reg_desc.byteoff); + + UPDATE_VCC_STAT(conn, tx_pdu, 1); + + if ( vcc->stats ) + atomic_inc(&vcc->stats->tx); + } + else + { + /* allocate descriptor */ + desc_base = alloc_tx_connection(conn); + if ( desc_base < 0 ) + { + ret = -EIO; + goto ALLOC_TX_CONNECTION_FAIL; + } + desc = &ppe_dev.dma.tx_descriptor_base[desc_base]; + + /* load descriptor from memory */ + reg_desc = *desc; + + /* if data pointer is not aligned, allocate new sk_buff */ + if ( ((u32)skb->data & (DMA_ALIGNMENT - 1)) ) + { + struct sk_buff *new_skb; + + printk("skb->data not aligned\n"); + + new_skb = alloc_skb_tx(skb->len); + if ( new_skb == NULL ) + { + ret = -ENOMEM; + goto ALLOC_SKB_TX_FAIL; + } + ATM_SKB(new_skb)->vcc = NULL; + skb_put(new_skb, skb->len); + memcpy(new_skb->data, skb->data, skb->len); + atm_free_tx_skb_vcc(skb); + skb = new_skb; + } + + reg_desc.dataptr = (u32)skb->data >> 2; + reg_desc.datalen = skb->len; + reg_desc.byteoff = 0; + reg_desc.iscell = 1; + + if ( vcc->stats ) + atomic_inc(&vcc->stats->tx); + } + + reg_desc.own = 1; + reg_desc.c = 1; + +printk("update descriptor send pointer, desc = 0x%08X", (u32)desc); + + ppe_dev.dma.tx_skb_pointers[desc_base] = skb; + *desc = reg_desc; + dma_cache_wback((unsigned long)skb->data, skb->len); + + mailbox_signal(conn, 1); + +printk("ppe_send: success"); +// up(&ppe_dev.sem); + + return 0; + +FIND_VCC_FAIL: + printk("FIND_VCC_FAIL\n"); + +// up(&ppe_dev.sem); + ppe_dev.mib.wtx_err_pdu++; + atm_free_tx_skb_vcc(skb); + + return ret; + +ALLOC_SKB_TX_FAIL: + printk("ALLOC_SKB_TX_FAIL\n"); + +// up(&ppe_dev.sem); + if ( vcc->qos.aal == ATM_AAL5 ) + { + UPDATE_VCC_STAT(conn, tx_err_pdu, 1); + ppe_dev.mib.wtx_err_pdu++; + } + if ( vcc->stats ) + atomic_inc(&vcc->stats->tx_err); + atm_free_tx_skb_vcc(skb); + + return ret; + +ALLOC_TX_CONNECTION_FAIL: + printk("ALLOC_TX_CONNECTION_FAIL\n"); + +// up(&ppe_dev.sem); + if ( vcc->qos.aal == ATM_AAL5 ) + { + UPDATE_VCC_STAT(conn, tx_sw_drop_pdu, 1); + ppe_dev.mib.wtx_drop_pdu++; + } + if ( vcc->stats ) + atomic_inc(&vcc->stats->tx_err); + atm_free_tx_skb_vcc(skb); + + return ret; +} + +int ppe_send_oam(struct atm_vcc *vcc, void *cell, int flags) +{ + int conn; + struct uni_cell_header *uni_cell_header = (struct uni_cell_header *)cell; + int desc_base; + struct sk_buff *skb; + register struct tx_descriptor reg_desc; + struct tx_descriptor *desc; + +printk("ppe_send_oam"); + + if ( ((uni_cell_header->pti == ATM_PTI_SEGF5 || uni_cell_header->pti == ATM_PTI_E2EF5) + && find_vpivci(uni_cell_header->vpi, uni_cell_header->vci) < 0) + || ((uni_cell_header->vci == 0x03 || uni_cell_header->vci == 0x04) + && find_vpi(uni_cell_header->vpi) < 0) ) + return -EINVAL; + +#if OAM_TX_QUEUE_NUMBER_PER_PORT != 0 + /* get queue ID of OAM TX queue, and the TX DMA channel ID is the same as queue ID */ + conn = ppe_dev.port[(int)vcc->dev->dev_data].oam_tx_queue; +#else + /* find queue ID */ + conn = find_vcc(vcc); + if ( conn < 0 ) + { + printk("OAM not find queue\n"); +// up(&ppe_dev.sem); + return -EINVAL; + } +#endif // OAM_TX_QUEUE_NUMBER_PER_PORT != 0 + + /* allocate descriptor */ + desc_base = alloc_tx_connection(conn); + if ( desc_base < 0 ) + { + printk("OAM not alloc tx connection\n"); +// up(&ppe_dev.sem); + return -EIO; + } + + desc = &ppe_dev.dma.tx_descriptor_base[desc_base]; + + /* load descriptor from memory */ + reg_desc = *(struct tx_descriptor *)desc; + + /* allocate sk_buff */ + skb = alloc_skb_tx(CELL_SIZE); + if ( skb == NULL ) + { +// up(&ppe_dev.sem); + return -ENOMEM; + } +#if OAM_TX_QUEUE_NUMBER_PER_PORT != 0 + ATM_SKB(skb)->vcc = NULL; +#else + ATM_SKB(skb)->vcc = vcc; +#endif // OAM_TX_QUEUE_NUMBER_PER_PORT != 0 + + /* copy data */ + skb_put(skb, CELL_SIZE); + memcpy(skb->data, cell, CELL_SIZE); + + /* setup descriptor */ + reg_desc.dataptr = (u32)skb->data >> 2; + reg_desc.datalen = CELL_SIZE; + reg_desc.byteoff = 0; + reg_desc.iscell = 1; + reg_desc.own = 1; + reg_desc.c = 1; + + /* update descriptor send pointer */ + ppe_dev.dma.tx_skb_pointers[desc_base] = skb; + + /* write discriptor to memory and write back cache */ + *(struct tx_descriptor *)desc = reg_desc; + dma_cache_wback((unsigned long)skb->data, skb->len); + + /* signal PPE */ + mailbox_signal(conn, 1); + + return 0; +} + +int ppe_change_qos(struct atm_vcc *vcc, struct atm_qos *qos, int flags) +{ + int conn; + printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__); + + if(vcc == NULL || qos == NULL ) + return -EINVAL; + conn = find_vcc(vcc); + if ( conn < 0 ) + return -EINVAL; + set_qsb(vcc, qos, conn); + + return 0; +} + +static inline void init_chip(void) +{ + /* enable PPE module in PMU */ + *(unsigned long *)0xBF10201C &= ~((1 << 15) | (1 << 13) | (1 << 9)); + + *EMA_CMDCFG = (EMA_CMD_BUF_LEN << 16) | (EMA_CMD_BASE_ADDR >> 2); + *EMA_DATACFG = (EMA_DATA_BUF_LEN << 16) | (EMA_DATA_BASE_ADDR >> 2); + *EMA_IER = 0x000000FF; + *EMA_CFG = EMA_READ_BURST | (EMA_WRITE_BURST << 2); + + /* enable mailbox */ + *MBOX_IGU1_ISRC = 0xFFFFFFFF; + *MBOX_IGU1_IER = 0x00000000; + *MBOX_IGU3_ISRC = 0xFFFFFFFF; + *MBOX_IGU3_IER = 0x00000000; +} + +int pp32_download_code(u32 *code_src, unsigned int code_dword_len, u32 *data_src, unsigned int data_dword_len) +{ + u32 reg_old_value; + volatile u32 *dest; + + if ( code_src == 0 || ((unsigned long)code_src & 0x03) != 0 + || data_src == 0 || ((unsigned long)data_src & 0x03) ) + return -EINVAL; + + /* save the old value of CDM_CFG and set PPE code memory to FPI bus access mode */ + reg_old_value = *CDM_CFG; + if ( code_dword_len <= 4096 ) + *CDM_CFG = CDM_CFG_RAM1_SET(0x00) | CDM_CFG_RAM0_SET(0x00); + else + *CDM_CFG = CDM_CFG_RAM1_SET(0x01) | CDM_CFG_RAM0_SET(0x00); + + /* copy code */ + dest = CDM_CODE_MEMORY_RAM0_ADDR(0); + while ( code_dword_len-- > 0 ) + *dest++ = *code_src++; + + /* copy data */ + dest = PP32_DATA_MEMORY_RAM1_ADDR(0); + while ( data_dword_len-- > 0 ) + *dest++ = *data_src++; + + return 0; +} + +int pp32_start(void) +{ + int ret; + register int i; + init_chip(); + /* download firmware */ + ret = pp32_download_code(firmware_binary_code, sizeof(firmware_binary_code) / sizeof(*firmware_binary_code), firmware_binary_data, sizeof(firmware_binary_data) / sizeof(*firmware_binary_data)); + if ( ret ) + return ret; + + /* run PP32 */ + *PP32_DBG_CTRL = DBG_CTRL_START_SET(1); + + /* idle for a while to let PP32 init itself */ + for ( i = 0; i < IDLE_CYCLE_NUMBER; i++ ); + + return 0; +} + +void pp32_stop(void) +{ + /* halt PP32 */ + *PP32_DBG_CTRL = DBG_CTRL_STOP_SET(1); +} |