summaryrefslogtreecommitdiffstats
path: root/package/hostapd
diff options
context:
space:
mode:
Diffstat (limited to 'package/hostapd')
-rw-r--r--package/hostapd/Config.in47
-rw-r--r--package/hostapd/Makefile342
-rw-r--r--package/hostapd/files/hostapd-full.config164
-rw-r--r--package/hostapd/files/hostapd-mini.config157
-rw-r--r--package/hostapd/files/hostapd.sh276
-rw-r--r--package/hostapd/files/multicall.c28
-rw-r--r--package/hostapd/files/wpa_supplicant-full.config408
-rw-r--r--package/hostapd/files/wpa_supplicant-mini.config406
-rw-r--r--package/hostapd/files/wpa_supplicant.sh199
-rw-r--r--package/hostapd/files/wps-hotplug.sh6
-rw-r--r--package/hostapd/patches/100-pending_work.patch123
-rw-r--r--package/hostapd/patches/300-nl80211_multicall_fixes.patch60
-rw-r--r--package/hostapd/patches/310-multicall_bridge_fix.patch45
-rw-r--r--package/hostapd/patches/320-madwifi_key_fixes.patch34
-rw-r--r--package/hostapd/patches/400-noscan.patch32
-rw-r--r--package/hostapd/patches/410-multicall.patch246
-rw-r--r--package/hostapd/patches/420-timestamp_check.patch12
-rw-r--r--package/hostapd/patches/430-rescan_immediately.patch11
-rw-r--r--package/hostapd/patches/440-optional_rfkill.patch261
-rw-r--r--package/hostapd/patches/450-reload_freq_change.patch23
-rw-r--r--package/hostapd/patches/451-nl80211_del_beacon_bss.patch63
-rw-r--r--package/hostapd/patches/452-ctrl_iface_reload.patch98
-rw-r--r--package/hostapd/patches/453-ap_sta_support.patch221
-rw-r--r--package/hostapd/patches/460-disable_ctrl_iface_mib.patch168
-rw-r--r--package/hostapd/patches/470-wpa_ie_cap_workaround.patch56
-rw-r--r--package/hostapd/patches/480-terminate_on_setup_failure.patch81
-rw-r--r--package/hostapd/patches/500-random_pool_add_kernel.patch168
-rw-r--r--package/hostapd/patches/510-bring_down_interface.patch19
-rw-r--r--package/hostapd/patches/520-fix_wps_pin_crash.patch12
-rw-r--r--package/hostapd/patches/530-wps_single_auth_enc_type.patch25
-rw-r--r--package/hostapd/patches/540-dynamic_20_40_mhz.patch202
-rw-r--r--package/hostapd/patches/550-limit_debug_messages.patch213
-rw-r--r--package/hostapd/patches/560-indicate-features.patch82
-rw-r--r--package/hostapd/patches/570-genl_connect_debug.patch11
-rw-r--r--package/hostapd/patches/580-fix_bss_addr.patch11
-rw-r--r--package/hostapd/patches/590-hostapd_cli_ifdef.patch50
-rw-r--r--package/hostapd/patches/601-wpa_supplicant-add-new-config-params-to-be-used-with.patch211
-rw-r--r--package/hostapd/patches/602-driver_nl80211-use-new-parameters-during-ibss-join.patch59
-rw-r--r--package/hostapd/patches/604-wpa_s-support-htmode-param.patch156
-rw-r--r--package/hostapd/patches/610-max_num_sta_probe.patch13
40 files changed, 0 insertions, 4799 deletions
diff --git a/package/hostapd/Config.in b/package/hostapd/Config.in
deleted file mode 100644
index 810c5a09a..000000000
--- a/package/hostapd/Config.in
+++ /dev/null
@@ -1,47 +0,0 @@
-# wpa_supplicant config
-config WPA_SUPPLICANT_NO_TIMESTAMP_CHECK
- bool "Disable timestamp check"
- depends PACKAGE_wpa-supplicant || PACKAGE_wpa-supplicant-mini || PACKAGE_wpad || PACKAGE_wpad-mini
- default n
- help
- This disables the timestamp check for certificates in wpa_supplicant
- Useful for devices without RTC that cannot reliably get the real date/time
-
-choice
- prompt "Choose TLS provider"
- default WPA_SUPPLICANT_INTERNAL
- depends PACKAGE_wpa-supplicant || PACKAGE_wpad
-
-config WPA_SUPPLICANT_INTERNAL
- bool "internal"
-
-config WPA_SUPPLICANT_OPENSSL
- bool "openssl"
- select PACKAGE_libopenssl
-
-endchoice
-
-config WPA_RFKILL_SUPPORT
- bool "Add rfkill support"
- depends PACKAGE_wpa-supplicant || PACKAGE_wpa-supplicant-mini || PACKAGE_wpad || PACKAGE_wpad-mini
- default n
-
-config WPA_MSG_MIN_PRIORITY
- int "Minimum debug message priority"
- default 3
- help
- Useful values are:
- 0 = all messages
- 1 = raw message dumps
- 2 = most debugging messages
- 3 = info messages
- 4 = warnings
- 5 = errors
-
-config DRIVER_WEXT_SUPPORT
- bool
- default n
-
-config DRIVER_11N_SUPPORT
- bool
- default n
diff --git a/package/hostapd/Makefile b/package/hostapd/Makefile
deleted file mode 100644
index bc4384f5e..000000000
--- a/package/hostapd/Makefile
+++ /dev/null
@@ -1,342 +0,0 @@
-#
-# Copyright (C) 2006-2012 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=hostapd
-PKG_VERSION:=20120910
-PKG_RELEASE:=1
-PKG_REV:=762b99db7a76803d1ad274e87caa6fe870d47441
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
-PKG_SOURCE_URL:=git://w1.fi/srv/git/hostap.git
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=$(PKG_REV)
-PKG_SOURCE_PROTO:=git
-PKG_MIRROR_MD5SUM:=fa3227c146cb50732fe8511ce6d1d862
-
-PKG_MAINTAINER:=Felix Fietkau <nbd@openwrt.org>
-
-PKG_BUILD_PARALLEL:=1
-
-PKG_BUILD_DEPENDS:= \
- PACKAGE_kmod-madwifi:madwifi \
-
-PKG_CONFIG_DEPENDS:= \
- CONFIG_WPA_SUPPLICANT_NO_TIMESTAMP_CHECK \
- CONFIG_PACKAGE_kmod-ath9k \
- CONFIG_PACKAGE_kmod-mac80211 \
- CONFIG_PACKAGE_kmod-madwifi \
- CONFIG_PACKAGE_hostapd \
- CONFIG_PACKAGE_hostapd-mini \
- CONFIG_PACKAGE_kmod-hostap \
- CONFIG_WPA_RFKILL_SUPPORT \
- CONFIG_DRIVER_WEXT_SUPPORT \
- CONFIG_DRIVER_11N_SUPPORT
-
-LOCAL_TYPE=$(strip \
- $(if $(findstring wpad,$(BUILD_VARIANT)),wpad, \
- $(if $(findstring supplicant,$(BUILD_VARIANT)),supplicant, \
- hostapd \
- )))
-LOCAL_VARIANT=$(patsubst wpad-%,%,$(patsubst supplicant-%,%,$(BUILD_VARIANT)))
-
-ifeq ($(LOCAL_TYPE),supplicant)
- ifeq ($(LOCAL_VARIANT),full)
- PKG_CONFIG_DEPENDS += \
- CONFIG_WPA_SUPPLICANT_INTERNAL \
- CONFIG_WPA_SUPPLICANT_OPENSSL
- endif
-endif
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-STAMP_CONFIGURED:=$(STAMP_CONFIGURED)_$(CONFIG_WPA_MSG_MIN_PRIORITY)
-
-ifneq ($(CONFIG_DRIVER_11N_SUPPORT),)
- HOSTAPD_IEEE80211N:=y
-endif
-
-DRIVER_MAKEOPTS= \
- CONFIG_DRIVER_NL80211=$(CONFIG_PACKAGE_kmod-mac80211) \
- CONFIG_DRIVER_MADWIFI=$(CONFIG_PACKAGE_kmod-madwifi) \
- CONFIG_DRIVER_HOSTAP=$(CONFIG_PACKAGE_kmod-hostap) \
- CONFIG_IEEE80211N=$(HOSTAPD_IEEE80211N) \
- CONFIG_IEEE80211W=$(CONFIG_PACKAGE_kmod-ath9k) \
- CONFIG_DRIVER_WEXT=$(CONFIG_DRIVER_WEXT_SUPPORT) \
- $(if $(CONFIG_WPA_RFKILL_SUPPORT),NEED_RFKILL=y)
-
-ifneq ($(LOCAL_TYPE),hostapd)
- ifdef CONFIG_WPA_SUPPLICANT_OPENSSL
- ifeq ($(LOCAL_VARIANT),full)
- DRIVER_MAKEOPTS += CONFIG_TLS=openssl
- TARGET_LDFLAGS += -lcrypto -lssl
- endif
- endif
- ifdef CONFIG_WPA_SUPPLICANT_NO_TIMESTAMP_CHECK
- TARGET_CFLAGS += -DNO_TIMESTAMP_CHECK
- endif
- DRIVER_MAKEOPTS += \
- CONFIG_DRIVER_ROBOSWITCH=$(CONFIG_PACKAGE_kmod-switch)
-endif
-
-DRV_DEPENDS:=+PACKAGE_kmod-mac80211:libnl-tiny @(!(TARGET_avr32||TARGET_etrax)||BROKEN)
-
-define Package/hostapd/Default
- SECTION:=net
- CATEGORY:=Network
- TITLE:=IEEE 802.1x Authenticator
- URL:=http://hostap.epitest.fi/
- DEPENDS:=$(DRV_DEPENDS)
- MAINTAINER:=Felix Fietkau <nbd@openwrt.org>
-endef
-
-define Package/hostapd
-$(call Package/hostapd/Default)
- TITLE+= (full)
- VARIANT:=full
-endef
-
-define Package/hostapd/description
- This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS
- Authenticator.
-endef
-
-define Package/hostapd-mini
-$(call Package/hostapd/Default)
- TITLE+= (WPA-PSK only)
- VARIANT:=mini
-endef
-
-define Package/hostapd-mini/description
- This package contains a minimal IEEE 802.1x/WPA Authenticator (WPA-PSK only).
-endef
-
-define Package/hostapd-utils
- $(call Package/hostapd/Default)
- TITLE+= (utils)
- DEPENDS:=@PACKAGE_hostapd||PACKAGE_hostapd-mini||PACKAGE_wpad||PACKAGE_wpad-mini
-endef
-
-define Package/hostapd-utils/description
- This package contains a command line utility to control the
- IEEE 802.1x/WPA/EAP/RADIUS Authenticator.
-endef
-
-define Package/wpad/Default
- SECTION:=net
- CATEGORY:=Network
- TITLE:=IEEE 802.1x Authenticator/Supplicant
- URL:=http://hostap.epitest.fi/
- MAINTAINER:=Felix Fietkau <nbd@openwrt.org>
-endef
-
-define Package/wpad
-$(call Package/wpad/Default)
- TITLE+= (full)
- DEPENDS:=$(DRV_DEPENDS) +WPA_SUPPLICANT_OPENSSL:libopenssl
- VARIANT:=wpad-full
-endef
-
-define Package/wpad/description
- This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS
- Authenticator and Supplicant
-endef
-
-define Package/wpad-mini
-$(call Package/wpad/Default)
- TITLE+= (WPA-PSK only)
- DEPENDS:=$(DRV_DEPENDS)
- VARIANT:=wpad-mini
-endef
-
-define Package/wpad-mini/description
- This package contains a minimal IEEE 802.1x/WPA Authenticator and Supplicant (WPA-PSK only).
-endef
-
-define Package/wpa-supplicant
- SECTION:=net
- CATEGORY:=Network
- TITLE:=WPA Supplicant
- URL:=http://hostap.epitest.fi/wpa_supplicant/
- DEPENDS:=$(DRV_DEPENDS) +WPA_SUPPLICANT_OPENSSL:libopenssl
- VARIANT:=supplicant-full
- MAINTAINER:=Felix Fietkau <nbd@openwrt.org>
-endef
-
-define Package/wpa-supplicant/Description
- WPA Supplicant
-endef
-
-define Package/wpa-supplicant/config
- source "$(SOURCE)/Config.in"
-endef
-
-define Package/wpa-supplicant-mini
- $(Package/wpa-supplicant)
- TITLE:=WPA Supplicant (minimal version)
- DEPENDS:=$(DRV_DEPENDS)
- VARIANT:=supplicant-mini
-endef
-
-define Package/wpa-supplicant-mini/Description
- WPA Supplicant (minimal version)
-endef
-
-define Package/wpa-cli
- SECTION:=net
- CATEGORY:=Network
- DEPENDS:=@PACKAGE_wpa-supplicant||PACKAGE_wpad-mini||PACKAGE_wpad
- TITLE:=WPA Supplicant command line interface
- MAINTAINER:=Felix Fietkau <nbd@openwrt.org>
-endef
-
-define Package/wpa-cli/Description
- WPA Supplicant control utility
-endef
-
-
-ifneq ($(wildcard $(PKG_BUILD_DIR)/.config_*),$(subst .configured_,.config_,$(STAMP_CONFIGURED)))
- define Build/Configure/rebuild
- $(FIND) $(PKG_BUILD_DIR) -name \*.o -or -name \*.a | $(XARGS) rm -f
- rm -f $(PKG_BUILD_DIR)/hostapd/hostapd
- rm -f $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant
- rm -f $(PKG_BUILD_DIR)/.config_*
- touch $(subst .configured_,.config_,$(STAMP_CONFIGURED))
- endef
-endif
-
-define Build/Configure
- $(Build/Configure/rebuild)
- $(CP) ./files/hostapd-$(LOCAL_VARIANT).config $(PKG_BUILD_DIR)/hostapd/.config
- $(CP) ./files/wpa_supplicant-$(LOCAL_VARIANT).config $(PKG_BUILD_DIR)/wpa_supplicant/.config
-endef
-
-TARGET_CPPFLAGS := \
- -I$(STAGING_DIR)/usr/include/libnl-tiny \
- -I$(PKG_BUILD_DIR)/src/crypto \
- $(TARGET_CPPFLAGS) \
- -I$(STAGING_DIR)/usr/include/madwifi \
- -DCONFIG_LIBNL20 \
- -D_GNU_SOURCE \
- $(if $(CONFIG_WPA_MSG_MIN_PRIORITY),-DCONFIG_MSG_MIN_PRIORITY=$(CONFIG_WPA_MSG_MIN_PRIORITY))
-
-TARGET_CFLAGS += -ffunction-sections -fdata-sections
-TARGET_LDFLAGS += -Wl,--gc-sections
-
-ifdef CONFIG_PACKAGE_kmod-mac80211
- TARGET_LDFLAGS += -lm -lnl-tiny
-endif
-
-define Build/RunMake
- CFLAGS="$(TARGET_CPPFLAGS) $(TARGET_CFLAGS)" \
- $(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR)/$(1) \
- $(TARGET_CONFIGURE_OPTS) \
- $(DRIVER_MAKEOPTS) \
- LIBS="$(TARGET_LDFLAGS)" \
- BCHECK= \
- $(2)
-endef
-
-define Build/Compile/wpad
- echo ` \
- $(call Build/RunMake,hostapd,-s MULTICALL=1 dump_cflags); \
- $(call Build/RunMake,wpa_supplicant,-s MULTICALL=1 dump_cflags) | \
- sed -e 's,-n ,,g' -e 's,$(TARGET_CFLAGS),,' \
- ` > $(PKG_BUILD_DIR)/.cflags
- +$(call Build/RunMake,hostapd, \
- CFLAGS="$$$$(cat $(PKG_BUILD_DIR)/.cflags)" \
- MULTICALL=1 \
- hostapd_cli hostapd_multi.a \
- )
- +$(call Build/RunMake,wpa_supplicant, \
- CFLAGS="$$$$(cat $(PKG_BUILD_DIR)/.cflags)" \
- MULTICALL=1 \
- wpa_cli wpa_supplicant_multi.a \
- )
- $(TARGET_CC) -o $(PKG_BUILD_DIR)/wpad \
- $(TARGET_CFLAGS) \
- ./files/multicall.c \
- $(PKG_BUILD_DIR)/hostapd/hostapd_multi.a \
- $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant_multi.a \
- $(TARGET_LDFLAGS)
-endef
-
-define Build/Compile/hostapd
- $(call Build/RunMake,hostapd, \
- hostapd hostapd_cli \
- )
-endef
-
-define Build/Compile/supplicant
- $(call Build/RunMake,wpa_supplicant, \
- wpa_cli wpa_supplicant \
- )
-endef
-
-define Build/Compile
- $(Build/Compile/$(LOCAL_TYPE))
-endef
-
-define Install/hostapd
- $(INSTALL_DIR) $(1)/lib/wifi
- $(INSTALL_DATA) ./files/hostapd.sh $(1)/lib/wifi/hostapd.sh
- $(INSTALL_DIR) $(1)/usr/sbin
-endef
-
-define Install/supplicant
- $(INSTALL_DIR) $(1)/lib/wifi
- $(INSTALL_DATA) ./files/wpa_supplicant.sh $(1)/lib/wifi/wpa_supplicant.sh
- $(INSTALL_DIR) $(1)/usr/sbin
-endef
-
-define Package/hostapd/install
- $(call Install/hostapd,$(1))
- $(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd $(1)/usr/sbin/
-endef
-Package/hostapd-mini/install = $(Package/hostapd/install)
-
-ifneq ($(LOCAL_TYPE),supplicant)
- define Package/hostapd-utils/install
- $(INSTALL_DIR) $(1)/usr/sbin $(1)/etc/hotplug.d/button
- $(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd_cli $(1)/usr/sbin/
- $(INSTALL_DATA) ./files/wps-hotplug.sh $(1)/etc/hotplug.d/button/50-wps
- endef
-endif
-
-define Package/wpad/install
- $(call Install/hostapd,$(1))
- $(call Install/supplicant,$(1))
- $(INSTALL_BIN) $(PKG_BUILD_DIR)/wpad $(1)/usr/sbin/
- ln -sf wpad $(1)/usr/sbin/hostapd
- ln -sf wpad $(1)/usr/sbin/wpa_supplicant
-endef
-Package/wpad-mini/install = $(Package/wpad/install)
-
-define Package/wpa-supplicant/install
- $(call Install/supplicant,$(1))
- $(INSTALL_BIN) $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant $(1)/usr/sbin/
-endef
-Package/wpa-supplicant-mini/install = $(Package/wpa-supplicant/install)
-
-ifneq ($(LOCAL_TYPE),hostapd)
- define Package/wpa-cli/install
- $(INSTALL_DIR) $(1)/usr/sbin
- $(CP) $(PKG_BUILD_DIR)/wpa_supplicant/wpa_cli $(1)/usr/sbin/
- endef
-endif
-
-$(eval $(call BuildPackage,hostapd))
-$(eval $(call BuildPackage,hostapd-mini))
-$(eval $(call BuildPackage,wpad))
-$(eval $(call BuildPackage,wpad-mini))
-$(eval $(call BuildPackage,wpa-supplicant))
-$(eval $(call BuildPackage,wpa-supplicant-mini))
-$(eval $(call BuildPackage,wpa-cli))
-$(eval $(call BuildPackage,hostapd-utils))
diff --git a/package/hostapd/files/hostapd-full.config b/package/hostapd/files/hostapd-full.config
deleted file mode 100644
index 3a0ce12fc..000000000
--- a/package/hostapd/files/hostapd-full.config
+++ /dev/null
@@ -1,164 +0,0 @@
-# Example hostapd build time configuration
-#
-# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cass, these lines should use += in order not
-# to override previous values of the variables.
-
-# Driver interface for Host AP driver
-CONFIG_DRIVER_HOSTAP=y
-
-# Driver interface for wired authenticator
-CONFIG_DRIVER_WIRED=y
-
-# Driver interface for madwifi driver
-CONFIG_DRIVER_MADWIFI=y
-#CFLAGS += -I../../madwifi # change to the madwifi source directory
-
-# Driver interface for Prism54 driver
-#CONFIG_DRIVER_PRISM54=y
-
-# Driver interface for drivers using the nl80211 kernel interface
-CONFIG_DRIVER_NL80211=y
-# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
-# shipped with your distribution yet. If that is the case, you need to build
-# newer libnl version and point the hostapd build to use it.
-#LIBNL=/usr/src/libnl
-#CFLAGS += -I$(LIBNL)/include
-#LIBS += -L$(LIBNL)/lib
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-
-# Driver interface for no driver (e.g., RADIUS server only)
-#CONFIG_DRIVER_NONE=y
-
-# IEEE 802.11F/IAPP
-CONFIG_IAPP=y
-
-# WPA2/IEEE 802.11i RSN pre-authentication
-CONFIG_RSN_PREAUTH=y
-
-# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
-CONFIG_PEERKEY=y
-
-# IEEE 802.11w (management frame protection)
-# This version is an experimental implementation based on IEEE 802.11w/D1.0
-# draft and is subject to change since the standard has not yet been finalized.
-# Driver support is also needed for IEEE 802.11w.
-#CONFIG_IEEE80211W=y
-
-# Integrated EAP server
-CONFIG_EAP=y
-
-# EAP-MD5 for the integrated EAP server
-CONFIG_EAP_MD5=y
-
-# EAP-TLS for the integrated EAP server
-CONFIG_EAP_TLS=y
-
-# EAP-MSCHAPv2 for the integrated EAP server
-CONFIG_EAP_MSCHAPV2=y
-
-# EAP-PEAP for the integrated EAP server
-CONFIG_EAP_PEAP=y
-
-# EAP-GTC for the integrated EAP server
-CONFIG_EAP_GTC=y
-
-# EAP-TTLS for the integrated EAP server
-CONFIG_EAP_TTLS=y
-
-# EAP-SIM for the integrated EAP server
-#CONFIG_EAP_SIM=y
-
-# EAP-AKA for the integrated EAP server
-#CONFIG_EAP_AKA=y
-
-# EAP-AKA' for the integrated EAP server
-# This requires CONFIG_EAP_AKA to be enabled, too.
-#CONFIG_EAP_AKA_PRIME=y
-
-# EAP-PAX for the integrated EAP server
-#CONFIG_EAP_PAX=y
-
-# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# EAP-SAKE for the integrated EAP server
-#CONFIG_EAP_SAKE=y
-
-# EAP-GPSK for the integrated EAP server
-#CONFIG_EAP_GPSK=y
-# Include support for optional SHA256 cipher suite in EAP-GPSK
-#CONFIG_EAP_GPSK_SHA256=y
-
-# EAP-FAST for the integrated EAP server
-# Note: Default OpenSSL package does not include support for all the
-# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
-# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch)
-# to add the needed functions.
-#CONFIG_EAP_FAST=y
-
-# Wi-Fi Protected Setup (WPS)
-#CONFIG_WPS=y
-# Enable UPnP support for external WPS Registrars
-#CONFIG_WPS_UPNP=y
-
-# EAP-IKEv2
-#CONFIG_EAP_IKEV2=y
-
-# Trusted Network Connect (EAP-TNC)
-#CONFIG_EAP_TNC=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-CONFIG_PKCS12=y
-
-# RADIUS authentication server. This provides access to the integrated EAP
-# server from external hosts using RADIUS.
-#CONFIG_RADIUS_SERVER=y
-
-# Build IPv6 support for RADIUS operations
-CONFIG_IPV6=y
-
-# IEEE Std 802.11r-2008 (Fast BSS Transition)
-#CONFIG_IEEE80211R=y
-
-# Use the hostapd's IEEE 802.11 authentication (ACL), but without
-# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
-#CONFIG_DRIVER_RADIUS_ACL=y
-
-# IEEE 802.11n (High Throughput) support
-CONFIG_IEEE80211N=y
-
-# Remove debugging code that is printing out debug messages to stdout.
-# This can be used to reduce the size of the hostapd considerably if debugging
-# code is not needed.
-#CONFIG_NO_STDOUT_DEBUG=y
-
-# Remove support for RADIUS accounting
-#CONFIG_NO_ACCOUNTING=y
-
-# Remove support for RADIUS
-#CONFIG_NO_RADIUS=y
-
-# Remove support for VLANs
-#CONFIG_NO_VLAN=y
-
-CONFIG_TLS=internal
-CONFIG_INTERNAL_LIBTOMMATH=y
-CONFIG_INTERNAL_AES=y
-NEED_AES_DEC=y
-
-CONFIG_NO_DUMP_STATE=y
-
-CONFIG_WPS=y
-CONFIG_FULL_DYNAMIC_VLAN=y
-
diff --git a/package/hostapd/files/hostapd-mini.config b/package/hostapd/files/hostapd-mini.config
deleted file mode 100644
index 3e94a645b..000000000
--- a/package/hostapd/files/hostapd-mini.config
+++ /dev/null
@@ -1,157 +0,0 @@
-# Example hostapd build time configuration
-#
-# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cass, these lines should use += in order not
-# to override previous values of the variables.
-
-# Driver interface for Host AP driver
-CONFIG_DRIVER_HOSTAP=y
-
-# Driver interface for wired authenticator
-CONFIG_DRIVER_WIRED=y
-
-# Driver interface for madwifi driver
-CONFIG_DRIVER_MADWIFI=y
-#CFLAGS += -I../../madwifi # change to the madwifi source directory
-
-# Driver interface for Prism54 driver
-#CONFIG_DRIVER_PRISM54=y
-
-# Driver interface for drivers using the nl80211 kernel interface
-CONFIG_DRIVER_NL80211=y
-# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
-# shipped with your distribution yet. If that is the case, you need to build
-# newer libnl version and point the hostapd build to use it.
-#LIBNL=/usr/src/libnl
-#CFLAGS += -I$(LIBNL)/include
-#LIBS += -L$(LIBNL)/lib
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-
-# Driver interface for no driver (e.g., RADIUS server only)
-#CONFIG_DRIVER_NONE=y
-
-# IEEE 802.11F/IAPP
-# CONFIG_IAPP=y
-
-# WPA2/IEEE 802.11i RSN pre-authentication
-CONFIG_RSN_PREAUTH=y
-
-# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
-CONFIG_PEERKEY=y
-
-# IEEE 802.11w (management frame protection)
-# This version is an experimental implementation based on IEEE 802.11w/D1.0
-# draft and is subject to change since the standard has not yet been finalized.
-# Driver support is also needed for IEEE 802.11w.
-#CONFIG_IEEE80211W=y
-
-# Integrated EAP server
-#CONFIG_EAP=y
-
-# EAP-MD5 for the integrated EAP server
-#CONFIG_EAP_MD5=y
-
-# EAP-TLS for the integrated EAP server
-#CONFIG_EAP_TLS=y
-
-# EAP-MSCHAPv2 for the integrated EAP server
-#CONFIG_EAP_MSCHAPV2=y
-
-# EAP-PEAP for the integrated EAP server
-#CONFIG_EAP_PEAP=y
-
-# EAP-GTC for the integrated EAP server
-#CONFIG_EAP_GTC=y
-
-# EAP-TTLS for the integrated EAP server
-#CONFIG_EAP_TTLS=y
-
-# EAP-SIM for the integrated EAP server
-#CONFIG_EAP_SIM=y
-
-# EAP-AKA for the integrated EAP server
-#CONFIG_EAP_AKA=y
-
-# EAP-AKA' for the integrated EAP server
-# This requires CONFIG_EAP_AKA to be enabled, too.
-#CONFIG_EAP_AKA_PRIME=y
-
-# EAP-PAX for the integrated EAP server
-#CONFIG_EAP_PAX=y
-
-# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# EAP-SAKE for the integrated EAP server
-#CONFIG_EAP_SAKE=y
-
-# EAP-GPSK for the integrated EAP server
-#CONFIG_EAP_GPSK=y
-# Include support for optional SHA256 cipher suite in EAP-GPSK
-#CONFIG_EAP_GPSK_SHA256=y
-
-# EAP-FAST for the integrated EAP server
-# Note: Default OpenSSL package does not include support for all the
-# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
-# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch)
-# to add the needed functions.
-#CONFIG_EAP_FAST=y
-
-# Wi-Fi Protected Setup (WPS)
-#CONFIG_WPS=y
-# Enable UPnP support for external WPS Registrars
-#CONFIG_WPS_UPNP=y
-
-# EAP-IKEv2
-#CONFIG_EAP_IKEV2=y
-
-# Trusted Network Connect (EAP-TNC)
-#CONFIG_EAP_TNC=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-#CONFIG_PKCS12=y
-
-# RADIUS authentication server. This provides access to the integrated EAP
-# server from external hosts using RADIUS.
-#CONFIG_RADIUS_SERVER=y
-
-# Build IPv6 support for RADIUS operations
-#CONFIG_IPV6=y
-
-# IEEE Std 802.11r-2008 (Fast BSS Transition)
-#CONFIG_IEEE80211R=y
-
-# Use the hostapd's IEEE 802.11 authentication (ACL), but without
-# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
-#CONFIG_DRIVER_RADIUS_ACL=y
-
-# IEEE 802.11n (High Throughput) support
-CONFIG_IEEE80211N=y
-
-# Remove debugging code that is printing out debug messages to stdout.
-# This can be used to reduce the size of the hostapd considerably if debugging
-# code is not needed.
-#CONFIG_NO_STDOUT_DEBUG=y
-
-# Remove support for RADIUS accounting
-CONFIG_NO_ACCOUNTING=y
-
-# Remove support for RADIUS
-CONFIG_NO_RADIUS=y
-
-# Remove support for VLANs
-#CONFIG_NO_VLAN=y
-
-CONFIG_TLS=internal
-
-CONFIG_NO_DUMP_STATE=y
diff --git a/package/hostapd/files/hostapd.sh b/package/hostapd/files/hostapd.sh
deleted file mode 100644
index d60c26f3c..000000000
--- a/package/hostapd/files/hostapd.sh
+++ /dev/null
@@ -1,276 +0,0 @@
-hostapd_set_bss_options() {
- local var="$1"
- local vif="$2"
- local enc wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wps_possible
-
- config_get enc "$vif" encryption
- config_get wep_rekey "$vif" wep_rekey # 300
- config_get wpa_group_rekey "$vif" wpa_group_rekey # 300
- config_get wpa_pair_rekey "$vif" wpa_pair_rekey # 300
- config_get wpa_master_rekey "$vif" wpa_master_rekey # 640
- config_get_bool ap_isolate "$vif" isolate 0
- config_get_bool disassoc_low_ack "$vif" disassoc_low_ack 1
- config_get max_num_sta "$vif" max_num_sta 0
- config_get max_inactivity "$vif" max_inactivity 0
-
- config_get device "$vif" device
- config_get hwmode "$device" hwmode
- config_get phy "$device" phy
-
- append "$var" "ctrl_interface=/var/run/hostapd-$phy" "$N"
-
- if [ "$ap_isolate" -gt 0 ]; then
- append "$var" "ap_isolate=$ap_isolate" "$N"
- fi
- if [ "$max_num_sta" -gt 0 ]; then
- append "$var" "max_num_sta=$max_num_sta" "$N"
- fi
- if [ "$max_inactivity" -gt 0 ]; then
- append "$var" "ap_max_inactivity=$max_inactivity" "$N"
- fi
- append "$var" "disassoc_low_ack=$disassoc_low_ack" "$N"
-
- # Examples:
- # psk-mixed/tkip => WPA1+2 PSK, TKIP
- # wpa-psk2/tkip+aes => WPA2 PSK, CCMP+TKIP
- # wpa2/tkip+aes => WPA2 RADIUS, CCMP+TKIP
- # ...
-
- # TODO: move this parsing function somewhere generic, so that
- # later it can be reused by drivers that don't use hostapd
-
- # crypto defaults: WPA2 vs WPA1
- case "$enc" in
- wpa2*|*psk2*)
- wpa=2
- crypto="CCMP"
- ;;
- *mixed*)
- wpa=3
- crypto="CCMP TKIP"
- ;;
- *)
- wpa=1
- crypto="TKIP"
- ;;
- esac
-
- # explicit override for crypto setting
- case "$enc" in
- *tkip+aes|*tkip+ccmp|*aes+tkip|*ccmp+tkip) crypto="CCMP TKIP";;
- *aes|*ccmp) crypto="CCMP";;
- *tkip) crypto="TKIP";;
- esac
-
- # enforce CCMP for 11ng and 11na
- case "$hwmode:$crypto" in
- *ng:TKIP|*na:TKIP) crypto="CCMP TKIP";;
- esac
-
- # use crypto/auth settings for building the hostapd config
- case "$enc" in
- *psk*)
- config_get psk "$vif" key
- if [ ${#psk} -eq 64 ]; then
- append "$var" "wpa_psk=$psk" "$N"
- else
- append "$var" "wpa_passphrase=$psk" "$N"
- fi
- wps_possible=1
- [ -n "$wpa_group_rekey" ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N"
- [ -n "$wpa_pair_rekey" ] && append "$var" "wpa_ptk_rekey=$wpa_pair_rekey" "$N"
- [ -n "$wpa_master_rekey" ] && append "$var" "wpa_gmk_rekey=$wpa_master_rekey" "$N"
- ;;
- *wpa*)
- # required fields? formats?
- # hostapd is particular, maybe a default configuration for failures
- config_get auth_server "$vif" auth_server
- [ -z "$auth_server" ] && config_get auth_server "$vif" server
- append "$var" "auth_server_addr=$auth_server" "$N"
- config_get auth_port "$vif" auth_port
- [ -z "$auth_port" ] && config_get auth_port "$vif" port
- auth_port=${auth_port:-1812}
- append "$var" "auth_server_port=$auth_port" "$N"
- config_get auth_secret "$vif" auth_secret
- [ -z "$auth_secret" ] && config_get auth_secret "$vif" key
- append "$var" "auth_server_shared_secret=$auth_secret" "$N"
- config_get_bool auth_cache "$vif" auth_cache 0
- [ "$auth_cache" -gt 0 ] || append "$var" "disable_pmksa_caching=1" "$N"
- [ "$auth_cache" -gt 0 ] || append "$var" "okc=0" "$N"
- config_get acct_server "$vif" acct_server
- [ -n "$acct_server" ] && append "$var" "acct_server_addr=$acct_server" "$N"
- config_get acct_port "$vif" acct_port
- [ -n "$acct_port" ] && acct_port=${acct_port:-1813}
- [ -n "$acct_port" ] && append "$var" "acct_server_port=$acct_port" "$N"
- config_get acct_secret "$vif" acct_secret
- [ -n "$acct_secret" ] && append "$var" "acct_server_shared_secret=$acct_secret" "$N"
- config_get nasid "$vif" nasid
- append "$var" "nas_identifier=$nasid" "$N"
- append "$var" "eapol_key_index_workaround=1" "$N"
- append "$var" "ieee8021x=1" "$N"
- append "$var" "wpa_key_mgmt=WPA-EAP" "$N"
- [ -n "$wpa_group_rekey" ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N"
- [ -n "$wpa_pair_rekey" ] && append "$var" "wpa_ptk_rekey=$wpa_pair_rekey" "$N"
- [ -n "$wpa_master_rekey" ] && append "$var" "wpa_gmk_rekey=$wpa_master_rekey" "$N"
- ;;
- *wep*)
- config_get key "$vif" key
- key="${key:-1}"
- case "$key" in
- [1234])
- for idx in 1 2 3 4; do
- local zidx
- zidx=$(($idx - 1))
- config_get ckey "$vif" "key${idx}"
- [ -n "$ckey" ] && \
- append "$var" "wep_key${zidx}=$(prepare_key_wep "$ckey")" "$N"
- done
- append "$var" "wep_default_key=$((key - 1))" "$N"
- ;;
- *)
- append "$var" "wep_key0=$(prepare_key_wep "$key")" "$N"
- append "$var" "wep_default_key=0" "$N"
- [ -n "$wep_rekey" ] && append "$var" "wep_rekey_period=$wep_rekey" "$N"
- ;;
- esac
- case "$enc" in
- *shared*)
- auth_algs=2
- ;;
- *mixed*)
- auth_algs=3
- ;;
- esac
- wpa=0
- crypto=
- ;;
- *)
- wpa=0
- crypto=
- ;;
- esac
- append "$var" "auth_algs=${auth_algs:-1}" "$N"
- append "$var" "wpa=$wpa" "$N"
- [ -n "$crypto" ] && append "$var" "wpa_pairwise=$crypto" "$N"
- [ -n "$wpa_group_rekey" ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N"
-
- config_get ssid "$vif" ssid
- config_get bridge "$vif" bridge
- config_get ieee80211d "$vif" ieee80211d
- config_get iapp_interface "$vif" iapp_interface
-
- config_get_bool wps_pbc "$vif" wps_pushbutton 0
- config_get_bool wps_label "$vif" wps_label 0
-
- config_get config_methods "$vif" wps_config
- [ "$wps_pbc" -gt 0 ] && append config_methods push_button
-
- [ -n "$wps_possible" -a -n "$config_methods" ] && {
- config_get device_type "$vif" wps_device_type "6-0050F204-1"
- config_get device_name "$vif" wps_device_name "OpenWrt AP"
- config_get manufacturer "$vif" wps_manufacturer "openwrt.org"
-
- append "$var" "eap_server=1" "$N"
- append "$var" "wps_state=2" "$N"
- append "$var" "ap_setup_locked=1" "$N"
- append "$var" "device_type=$device_type" "$N"
- append "$var" "device_name=$device_name" "$N"
- append "$var" "manufacturer=$manufacturer" "$N"
- append "$var" "config_methods=$config_methods" "$N"
- }
-
- append "$var" "ssid=$ssid" "$N"
- [ -n "$bridge" ] && append "$var" "bridge=$bridge" "$N"
- [ -n "$ieee80211d" ] && append "$var" "ieee80211d=$ieee80211d" "$N"
- [ -n "$iapp_interface" ] && append "$var" iapp_interface=$(uci_get_state network "$iapp_interface" ifname "$iapp_interface") "$N"
-
- if [ "$wpa" -ge "2" ]
- then
- # RSN -> allow preauthentication
- config_get_bool rsn_preauth "$vif" rsn_preauth "$auth_cache"
- if [ -n "$bridge" -a "$rsn_preauth" = 1 ]
- then
- append "$var" "rsn_preauth=1" "$N"
- append "$var" "rsn_preauth_interfaces=$bridge" "$N"
- fi
-
- # RSN -> allow management frame protection
- config_get ieee80211w "$vif" ieee80211w
- case "$ieee80211w" in
- [012])
- append "$var" "ieee80211w=$ieee80211w" "$N"
- [ "$ieee80211w" -gt "0" ] && {
- config_get ieee80211w_max_timeout "$vif" ieee80211w_max_timeout
- config_get ieee80211w_retry_timeout "$vif" ieee80211w_retry_timeout
- [ -n "$ieee80211w_max_timeout" ] && \
- append "$var" "assoc_sa_query_max_timeout=$ieee80211w_max_timeout" "$N"
- [ -n "$ieee80211w_retry_timeout" ] && \
- append "$var" "assoc_sa_query_retry_timeout=$ieee80211w_retry_timeout" "$N"
- }
- ;;
- esac
- fi
-}
-
-hostapd_set_log_options() {
- local var="$1"
- local cfg="$2"
- local log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme
-
- config_get log_level "$cfg" log_level 2
-
- config_get_bool log_80211 "$cfg" log_80211 1
- config_get_bool log_8021x "$cfg" log_8021x 1
- config_get_bool log_radius "$cfg" log_radius 1
- config_get_bool log_wpa "$cfg" log_wpa 1
- config_get_bool log_driver "$cfg" log_driver 1
- config_get_bool log_iapp "$cfg" log_iapp 1
- config_get_bool log_mlme "$cfg" log_mlme 1
-
- local log_mask=$(( \
- ($log_80211 << 0) | \
- ($log_8021x << 1) | \
- ($log_radius << 2) | \
- ($log_wpa << 3) | \
- ($log_driver << 4) | \
- ($log_iapp << 5) | \
- ($log_mlme << 6) \
- ))
-
- append "$var" "logger_syslog=$log_mask" "$N"
- append "$var" "logger_syslog_level=$log_level" "$N"
- append "$var" "logger_stdout=$log_mask" "$N"
- append "$var" "logger_stdout_level=$log_level" "$N"
-}
-
-hostapd_setup_vif() {
- local vif="$1"
- local driver="$2"
- local ifname device channel hwmode
-
- hostapd_cfg=
-
- config_get ifname "$vif" ifname
- config_get device "$vif" device
- config_get channel "$device" channel
- config_get hwmode "$device" hwmode
-
- hostapd_set_log_options hostapd_cfg "$device"
- hostapd_set_bss_options hostapd_cfg "$vif"
-
- case "$hwmode" in
- *bg|*gdt|*gst|*fh) hwmode=g;;
- *adt|*ast) hwmode=a;;
- esac
- [ "$channel" = auto ] && channel=
- [ -n "$channel" -a -z "$hwmode" ] && wifi_fixup_hwmode "$device"
- cat > /var/run/hostapd-$ifname.conf <<EOF
-driver=$driver
-interface=$ifname
-${hwmode:+hw_mode=${hwmode#11}}
-${channel:+channel=$channel}
-$hostapd_cfg
-EOF
- hostapd -P /var/run/wifi-$ifname.pid -B /var/run/hostapd-$ifname.conf
-}
-
diff --git a/package/hostapd/files/multicall.c b/package/hostapd/files/multicall.c
deleted file mode 100644
index c8e814bb5..000000000
--- a/package/hostapd/files/multicall.c
+++ /dev/null
@@ -1,28 +0,0 @@
-#include <stdio.h>
-#include <string.h>
-#include <stdbool.h>
-
-extern int hostapd_main(int argc, char **argv);
-extern int wpa_supplicant_main(int argc, char **argv);
-
-int main(int argc, char **argv)
-{
- bool restart = false;
- const char *prog = argv[0];
-
-restart:
- if (strstr(argv[0], "hostapd"))
- return hostapd_main(argc, argv);
- else if (strstr(argv[0], "wpa_supplicant"))
- return wpa_supplicant_main(argc, argv);
-
- if (!restart && argc > 1) {
- argv++;
- argc--;
- restart = true;
- goto restart;
- }
-
- fprintf(stderr, "Invalid command.\nUsage: %s wpa_supplicant|hostapd [<arguments>]\n", prog);
- return 255;
-}
diff --git a/package/hostapd/files/wpa_supplicant-full.config b/package/hostapd/files/wpa_supplicant-full.config
deleted file mode 100644
index f5abbad94..000000000
--- a/package/hostapd/files/wpa_supplicant-full.config
+++ /dev/null
@@ -1,408 +0,0 @@
-# Example wpa_supplicant build time configuration
-#
-# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cases, these lines should use += in order not
-# to override previous values of the variables.
-
-
-# Uncomment following two lines and fix the paths if you have installed OpenSSL
-# or GnuTLS in non-default location
-#CFLAGS += -I/usr/local/openssl/include
-#LIBS += -L/usr/local/openssl/lib
-
-# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
-# the kerberos files are not in the default include path. Following line can be
-# used to fix build issues on such systems (krb5.h not found).
-#CFLAGS += -I/usr/include/kerberos
-
-# Example configuration for various cross-compilation platforms
-
-#### sveasoft (e.g., for Linksys WRT54G) ######################################
-#CC=mipsel-uclibc-gcc
-#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
-#CFLAGS += -Os
-#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
-#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
-###############################################################################
-
-#### openwrt (e.g., for Linksys WRT54G) #######################################
-#CC=mipsel-uclibc-gcc
-#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
-#CFLAGS += -Os
-#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
-# -I../WRT54GS/release/src/include
-#LIBS = -lssl
-###############################################################################
-
-
-# Driver interface for Host AP driver
-CONFIG_DRIVER_HOSTAP=y
-
-# Driver interface for Agere driver
-#CONFIG_DRIVER_HERMES=y
-# Change include directories to match with the local setup
-#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
-#CFLAGS += -I../../include/wireless
-
-# Driver interface for madwifi driver
-# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
-#CONFIG_DRIVER_MADWIFI=y
-# Set include directory to the madwifi source tree
-#CFLAGS += -I../../madwifi
-
-# Driver interface for ndiswrapper
-# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
-#CONFIG_DRIVER_NDISWRAPPER=y
-
-# Driver interface for Atmel driver
-# CONFIG_DRIVER_ATMEL=y
-
-# Driver interface for old Broadcom driver
-# Please note that the newer Broadcom driver ("hybrid Linux driver") supports
-# Linux wireless extensions and does not need (or even work) with the old
-# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver.
-#CONFIG_DRIVER_BROADCOM=y
-# Example path for wlioctl.h; change to match your configuration
-#CFLAGS += -I/opt/WRT54GS/release/src/include
-
-# Driver interface for Intel ipw2100/2200 driver
-# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
-#CONFIG_DRIVER_IPW=y
-
-# Driver interface for Ralink driver
-#CONFIG_DRIVER_RALINK=y
-
-# Driver interface for generic Linux wireless extensions
-CONFIG_DRIVER_WEXT=y
-
-# Driver interface for Linux drivers using the nl80211 kernel interface
-CONFIG_DRIVER_NL80211=y
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-#LIBS_p += -L/usr/local/lib
-#LIBS_c += -L/usr/local/lib
-
-# Driver interface for Windows NDIS
-#CONFIG_DRIVER_NDIS=y
-#CFLAGS += -I/usr/include/w32api/ddk
-#LIBS += -L/usr/local/lib
-# For native build using mingw
-#CONFIG_NATIVE_WINDOWS=y
-# Additional directories for cross-compilation on Linux host for mingw target
-#CFLAGS += -I/opt/mingw/mingw32/include/ddk
-#LIBS += -L/opt/mingw/mingw32/lib
-#CC=mingw32-gcc
-# By default, driver_ndis uses WinPcap for low-level operations. This can be
-# replaced with the following option which replaces WinPcap calls with NDISUIO.
-# However, this requires that WZC is disabled (net stop wzcsvc) before starting
-# wpa_supplicant.
-# CONFIG_USE_NDISUIO=y
-
-# Driver interface for development testing
-#CONFIG_DRIVER_TEST=y
-
-# Include client MLME (management frame processing) for test driver
-# This can be used to test MLME operations in hostapd with the test interface.
-# space.
-#CONFIG_CLIENT_MLME=y
-
-# Driver interface for wired Ethernet drivers
-CONFIG_DRIVER_WIRED=y
-
-# Driver interface for the Broadcom RoboSwitch family
-#CONFIG_DRIVER_ROBOSWITCH=y
-
-# Driver interface for no driver (e.g., WPS ER only)
-#CONFIG_DRIVER_NONE=y
-
-# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
-# included)
-CONFIG_IEEE8021X_EAPOL=y
-
-# EAP-MD5
-CONFIG_EAP_MD5=y
-
-# EAP-MSCHAPv2
-CONFIG_EAP_MSCHAPV2=y
-
-# EAP-TLS
-CONFIG_EAP_TLS=y
-
-# EAL-PEAP
-CONFIG_EAP_PEAP=y
-
-# EAP-TTLS
-CONFIG_EAP_TTLS=y
-
-# EAP-FAST
-# Note: Default OpenSSL package does not include support for all the
-# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
-# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch)
-# to add the needed functions.
-#CONFIG_EAP_FAST=y
-
-# EAP-GTC
-CONFIG_EAP_GTC=y
-
-# EAP-OTP
-CONFIG_EAP_OTP=y
-
-# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
-#CONFIG_EAP_SIM=y
-
-# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# EAP-PAX
-#CONFIG_EAP_PAX=y
-
-# LEAP
-CONFIG_EAP_LEAP=y
-
-# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
-#CONFIG_EAP_AKA=y
-
-# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
-# This requires CONFIG_EAP_AKA to be enabled, too.
-#CONFIG_EAP_AKA_PRIME=y
-
-# Enable USIM simulator (Milenage) for EAP-AKA
-#CONFIG_USIM_SIMULATOR=y
-
-# EAP-SAKE
-#CONFIG_EAP_SAKE=y
-
-# EAP-GPSK
-#CONFIG_EAP_GPSK=y
-# Include support for optional SHA256 cipher suite in EAP-GPSK
-#CONFIG_EAP_GPSK_SHA256=y
-
-# EAP-TNC and related Trusted Network Connect support (experimental)
-#CONFIG_EAP_TNC=y
-
-# Wi-Fi Protected Setup (WPS)
-CONFIG_WPS=y
-
-# EAP-IKEv2
-#CONFIG_EAP_IKEV2=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-CONFIG_PKCS12=y
-
-# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
-# engine.
-CONFIG_SMARTCARD=y
-
-# PC/SC interface for smartcards (USIM, GSM SIM)
-# Enable this if EAP-SIM or EAP-AKA is included
-#CONFIG_PCSC=y
-
-# Development testing
-#CONFIG_EAPOL_TEST=y
-
-# Select control interface backend for external programs, e.g, wpa_cli:
-# unix = UNIX domain sockets (default for Linux/*BSD)
-# udp = UDP sockets using localhost (127.0.0.1)
-# named_pipe = Windows Named Pipe (default for Windows)
-# y = use default (backwards compatibility)
-# If this option is commented out, control interface is not included in the
-# build.
-CONFIG_CTRL_IFACE=y
-
-# Include support for GNU Readline and History Libraries in wpa_cli.
-# When building a wpa_cli binary for distribution, please note that these
-# libraries are licensed under GPL and as such, BSD license may not apply for
-# the resulting binary.
-#CONFIG_READLINE=y
-
-# Remove debugging code that is printing out debug message to stdout.
-# This can be used to reduce the size of the wpa_supplicant considerably
-# if debugging code is not needed. The size reduction can be around 35%
-# (e.g., 90 kB).
-#CONFIG_NO_STDOUT_DEBUG=y
-
-# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
-# 35-50 kB in code size.
-#CONFIG_NO_WPA=y
-
-# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to
-# save about 1 kB in code size when building only WPA-Personal (no EAP support)
-# or 6 kB if building for WPA-Enterprise.
-#CONFIG_NO_WPA2=y
-
-# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
-# This option can be used to reduce code size by removing support for
-# converting ASCII passphrases into PSK. If this functionality is removed, the
-# PSK can only be configured as the 64-octet hexstring (e.g., from
-# wpa_passphrase). This saves about 0.5 kB in code size.
-#CONFIG_NO_WPA_PASSPHRASE=y
-
-# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
-# This can be used if ap_scan=1 mode is never enabled.
-#CONFIG_NO_SCAN_PROCESSING=y
-
-# Select configuration backend:
-# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
-# path is given on command line, not here; this option is just used to
-# select the backend that allows configuration files to be used)
-# winreg = Windows registry (see win_example.reg for an example)
-CONFIG_BACKEND=file
-
-# Remove configuration write functionality (i.e., to allow the configuration
-# file to be updated based on runtime configuration changes). The runtime
-# configuration can still be changed, the changes are just not going to be
-# persistent over restarts. This option can be used to reduce code size by
-# about 3.5 kB.
-#CONFIG_NO_CONFIG_WRITE=y
-
-# Remove support for configuration blobs to reduce code size by about 1.5 kB.
-#CONFIG_NO_CONFIG_BLOBS=y
-
-# Select program entry point implementation:
-# main = UNIX/POSIX like main() function (default)
-# main_winsvc = Windows service (read parameters from registry)
-# main_none = Very basic example (development use only)
-#CONFIG_MAIN=main
-
-# Select wrapper for operatins system and C library specific functions
-# unix = UNIX/POSIX like systems (default)
-# win32 = Windows systems
-# none = Empty template
-#CONFIG_OS=unix
-
-# Select event loop implementation
-# eloop = select() loop (default)
-# eloop_win = Windows events and WaitForMultipleObject() loop
-# eloop_none = Empty template
-#CONFIG_ELOOP=eloop
-
-# Select layer 2 packet implementation
-# linux = Linux packet socket (default)
-# pcap = libpcap/libdnet/WinPcap
-# freebsd = FreeBSD libpcap
-# winpcap = WinPcap with receive thread
-# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
-# none = Empty template
-#CONFIG_L2_PACKET=linux
-
-# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
-CONFIG_PEERKEY=y
-
-# IEEE 802.11w (management frame protection)
-# This version is an experimental implementation based on IEEE 802.11w/D1.0
-# draft and is subject to change since the standard has not yet been finalized.
-# Driver support is also needed for IEEE 802.11w.
-CONFIG_IEEE80211W=y
-
-# Select TLS implementation
-# openssl = OpenSSL (default)
-# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
-# internal = Internal TLSv1 implementation (experimental)
-# none = Empty template
-CONFIG_TLS=internal
-
-# Whether to enable TLS/IA support, which is required for EAP-TTLSv1.
-# You need CONFIG_TLS=gnutls for this to have any effect. Please note that
-# even though the core GnuTLS library is released under LGPL, this extra
-# library uses GPL and as such, the terms of GPL apply to the combination
-# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not
-# apply for distribution of the resulting binary.
-#CONFIG_GNUTLS_EXTRA=y
-
-# If CONFIG_TLS=internal is used, additional library and include paths are
-# needed for LibTomMath. Alternatively, an integrated, minimal version of
-# LibTomMath can be used. See beginning of libtommath.c for details on benefits
-# and drawbacks of this option.
-CONFIG_INTERNAL_LIBTOMMATH=y
-#ifndef CONFIG_INTERNAL_LIBTOMMATH
-#LTM_PATH=/usr/src/libtommath-0.39
-#CFLAGS += -I$(LTM_PATH)
-#LIBS += -L$(LTM_PATH)
-#LIBS_p += -L$(LTM_PATH)
-#endif
-# At the cost of about 4 kB of additional binary size, the internal LibTomMath
-# can be configured to include faster routines for exptmod, sqr, and div to
-# speed up DH and RSA calculation considerably
-CONFIG_INTERNAL_LIBTOMMATH_FAST=y
-
-# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
-# This is only for Windows builds and requires WMI-related header files and
-# WbemUuid.Lib from Platform SDK even when building with MinGW.
-#CONFIG_NDIS_EVENTS_INTEGRATED=y
-#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
-
-# Add support for old DBus control interface
-# (fi.epitest.hostap.WPASupplicant)
-#CONFIG_CTRL_IFACE_DBUS=y
-
-# Add support for new DBus control interface
-# (fi.w1.hostap.wpa_supplicant1)
-#CONFIG_CTRL_IFACE_DBUS_NEW=y
-
-# Add introspection support for new DBus control interface
-#CONFIG_CTRL_IFACE_DBUS_INTRO=y
-
-# Add support for loading EAP methods dynamically as shared libraries.
-# When this option is enabled, each EAP method can be either included
-# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
-# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
-# be loaded in the beginning of the wpa_supplicant configuration file
-# (see load_dynamic_eap parameter in the example file) before being used in
-# the network blocks.
-#
-# Note that some shared parts of EAP methods are included in the main program
-# and in order to be able to use dynamic EAP methods using these parts, the
-# main program must have been build with the EAP method enabled (=y or =dyn).
-# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
-# unless at least one of them was included in the main build to force inclusion
-# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
-# in the main build to be able to load these methods dynamically.
-#
-# Please also note that using dynamic libraries will increase the total binary
-# size. Thus, it may not be the best option for targets that have limited
-# amount of memory/flash.
-#CONFIG_DYNAMIC_EAP_METHODS=y
-
-# IEEE Std 802.11r-2008 (Fast BSS Transition)
-#CONFIG_IEEE80211R=y
-
-# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
-#CONFIG_DEBUG_FILE=y
-
-# Enable privilege separation (see README 'Privilege separation' for details)
-#CONFIG_PRIVSEP=y
-
-# Enable mitigation against certain attacks against TKIP by delaying Michael
-# MIC error reports by a random amount of time between 0 and 60 seconds
-#CONFIG_DELAYED_MIC_ERROR_REPORT=y
-
-# Enable tracing code for developer debugging
-# This tracks use of memory allocations and other registrations and reports
-# incorrect use with a backtrace of call (or allocation) location.
-#CONFIG_WPA_TRACE=y
-# For BSD, comment out these.
-#LIBS += -lexecinfo
-#LIBS_p += -lexecinfo
-#LIBS_c += -lexecinfo
-
-# Use libbfd to get more details for developer debugging
-# This enables use of libbfd to get more detailed symbols for the backtraces
-# generated by CONFIG_WPA_TRACE=y.
-#CONFIG_WPA_TRACE_BFD=y
-# For BSD, comment out these.
-#LIBS += -lbfd -liberty -lz
-#LIBS_p += -lbfd -liberty -lz
-#LIBS_c += -lbfd -liberty -lz
-
-NEED_80211_COMMON=y
-
-CONFIG_IBSS_RSN=y
diff --git a/package/hostapd/files/wpa_supplicant-mini.config b/package/hostapd/files/wpa_supplicant-mini.config
deleted file mode 100644
index 772e1d980..000000000
--- a/package/hostapd/files/wpa_supplicant-mini.config
+++ /dev/null
@@ -1,406 +0,0 @@
-# Example wpa_supplicant build time configuration
-#
-# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cases, these lines should use += in order not
-# to override previous values of the variables.
-
-
-# Uncomment following two lines and fix the paths if you have installed OpenSSL
-# or GnuTLS in non-default location
-#CFLAGS += -I/usr/local/openssl/include
-#LIBS += -L/usr/local/openssl/lib
-
-# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
-# the kerberos files are not in the default include path. Following line can be
-# used to fix build issues on such systems (krb5.h not found).
-#CFLAGS += -I/usr/include/kerberos
-
-# Example configuration for various cross-compilation platforms
-
-#### sveasoft (e.g., for Linksys WRT54G) ######################################
-#CC=mipsel-uclibc-gcc
-#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
-#CFLAGS += -Os
-#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
-#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
-###############################################################################
-
-#### openwrt (e.g., for Linksys WRT54G) #######################################
-#CC=mipsel-uclibc-gcc
-#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
-#CFLAGS += -Os
-#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
-# -I../WRT54GS/release/src/include
-#LIBS = -lssl
-###############################################################################
-
-
-# Driver interface for Host AP driver
-CONFIG_DRIVER_HOSTAP=y
-
-# Driver interface for Agere driver
-#CONFIG_DRIVER_HERMES=y
-# Change include directories to match with the local setup
-#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
-#CFLAGS += -I../../include/wireless
-
-# Driver interface for madwifi driver
-# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
-#CONFIG_DRIVER_MADWIFI=y
-# Set include directory to the madwifi source tree
-#CFLAGS += -I../../madwifi
-
-# Driver interface for ndiswrapper
-# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
-#CONFIG_DRIVER_NDISWRAPPER=y
-
-# Driver interface for Atmel driver
-# CONFIG_DRIVER_ATMEL=y
-
-# Driver interface for old Broadcom driver
-# Please note that the newer Broadcom driver ("hybrid Linux driver") supports
-# Linux wireless extensions and does not need (or even work) with the old
-# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver.
-#CONFIG_DRIVER_BROADCOM=y
-# Example path for wlioctl.h; change to match your configuration
-#CFLAGS += -I/opt/WRT54GS/release/src/include
-
-# Driver interface for Intel ipw2100/2200 driver
-# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
-#CONFIG_DRIVER_IPW=y
-
-# Driver interface for Ralink driver
-#CONFIG_DRIVER_RALINK=y
-
-# Driver interface for generic Linux wireless extensions
-CONFIG_DRIVER_WEXT=y
-
-# Driver interface for Linux drivers using the nl80211 kernel interface
-CONFIG_DRIVER_NL80211=y
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-#LIBS_p += -L/usr/local/lib
-#LIBS_c += -L/usr/local/lib
-
-# Driver interface for Windows NDIS
-#CONFIG_DRIVER_NDIS=y
-#CFLAGS += -I/usr/include/w32api/ddk
-#LIBS += -L/usr/local/lib
-# For native build using mingw
-#CONFIG_NATIVE_WINDOWS=y
-# Additional directories for cross-compilation on Linux host for mingw target
-#CFLAGS += -I/opt/mingw/mingw32/include/ddk
-#LIBS += -L/opt/mingw/mingw32/lib
-#CC=mingw32-gcc
-# By default, driver_ndis uses WinPcap for low-level operations. This can be
-# replaced with the following option which replaces WinPcap calls with NDISUIO.
-# However, this requires that WZC is disabled (net stop wzcsvc) before starting
-# wpa_supplicant.
-# CONFIG_USE_NDISUIO=y
-
-# Driver interface for development testing
-#CONFIG_DRIVER_TEST=y
-
-# Include client MLME (management frame processing) for test driver
-# This can be used to test MLME operations in hostapd with the test interface.
-# space.
-#CONFIG_CLIENT_MLME=y
-
-# Driver interface for wired Ethernet drivers
-CONFIG_DRIVER_WIRED=y
-
-# Driver interface for the Broadcom RoboSwitch family
-#CONFIG_DRIVER_ROBOSWITCH=y
-
-# Driver interface for no driver (e.g., WPS ER only)
-#CONFIG_DRIVER_NONE=y
-
-# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
-# included)
-# CONFIG_IEEE8021X_EAPOL=y
-
-# EAP-MD5
-# CONFIG_EAP_MD5=y
-
-# EAP-MSCHAPv2
-# CONFIG_EAP_MSCHAPV2=y
-
-# EAP-TLS
-# CONFIG_EAP_TLS=y
-
-# EAL-PEAP
-# CONFIG_EAP_PEAP=y
-
-# EAP-TTLS
-# CONFIG_EAP_TTLS=y
-
-# EAP-FAST
-# Note: Default OpenSSL package does not include support for all the
-# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
-# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch)
-# to add the needed functions.
-#CONFIG_EAP_FAST=y
-
-# EAP-GTC
-# CONFIG_EAP_GTC=y
-
-# EAP-OTP
-# CONFIG_EAP_OTP=y
-
-# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
-#CONFIG_EAP_SIM=y
-
-# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# EAP-PAX
-#CONFIG_EAP_PAX=y
-
-# LEAP
-# CONFIG_EAP_LEAP=y
-
-# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
-#CONFIG_EAP_AKA=y
-
-# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
-# This requires CONFIG_EAP_AKA to be enabled, too.
-#CONFIG_EAP_AKA_PRIME=y
-
-# Enable USIM simulator (Milenage) for EAP-AKA
-#CONFIG_USIM_SIMULATOR=y
-
-# EAP-SAKE
-#CONFIG_EAP_SAKE=y
-
-# EAP-GPSK
-#CONFIG_EAP_GPSK=y
-# Include support for optional SHA256 cipher suite in EAP-GPSK
-#CONFIG_EAP_GPSK_SHA256=y
-
-# EAP-TNC and related Trusted Network Connect support (experimental)
-#CONFIG_EAP_TNC=y
-
-# Wi-Fi Protected Setup (WPS)
-#CONFIG_WPS=y
-
-# EAP-IKEv2
-#CONFIG_EAP_IKEV2=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-# CONFIG_PKCS12=y
-
-# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
-# engine.
-# CONFIG_SMARTCARD=y
-
-# PC/SC interface for smartcards (USIM, GSM SIM)
-# Enable this if EAP-SIM or EAP-AKA is included
-#CONFIG_PCSC=y
-
-# Development testing
-#CONFIG_EAPOL_TEST=y
-
-# Select control interface backend for external programs, e.g, wpa_cli:
-# unix = UNIX domain sockets (default for Linux/*BSD)
-# udp = UDP sockets using localhost (127.0.0.1)
-# named_pipe = Windows Named Pipe (default for Windows)
-# y = use default (backwards compatibility)
-# If this option is commented out, control interface is not included in the
-# build.
-CONFIG_CTRL_IFACE=y
-
-# Include support for GNU Readline and History Libraries in wpa_cli.
-# When building a wpa_cli binary for distribution, please note that these
-# libraries are licensed under GPL and as such, BSD license may not apply for
-# the resulting binary.
-#CONFIG_READLINE=y
-
-# Remove debugging code that is printing out debug message to stdout.
-# This can be used to reduce the size of the wpa_supplicant considerably
-# if debugging code is not needed. The size reduction can be around 35%
-# (e.g., 90 kB).
-#CONFIG_NO_STDOUT_DEBUG=y
-
-# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
-# 35-50 kB in code size.
-#CONFIG_NO_WPA=y
-
-# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to
-# save about 1 kB in code size when building only WPA-Personal (no EAP support)
-# or 6 kB if building for WPA-Enterprise.
-#CONFIG_NO_WPA2=y
-
-# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
-# This option can be used to reduce code size by removing support for
-# converting ASCII passphrases into PSK. If this functionality is removed, the
-# PSK can only be configured as the 64-octet hexstring (e.g., from
-# wpa_passphrase). This saves about 0.5 kB in code size.
-#CONFIG_NO_WPA_PASSPHRASE=y
-
-# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
-# This can be used if ap_scan=1 mode is never enabled.
-#CONFIG_NO_SCAN_PROCESSING=y
-
-# Select configuration backend:
-# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
-# path is given on command line, not here; this option is just used to
-# select the backend that allows configuration files to be used)
-# winreg = Windows registry (see win_example.reg for an example)
-CONFIG_BACKEND=file
-
-# Remove configuration write functionality (i.e., to allow the configuration
-# file to be updated based on runtime configuration changes). The runtime
-# configuration can still be changed, the changes are just not going to be
-# persistent over restarts. This option can be used to reduce code size by
-# about 3.5 kB.
-#CONFIG_NO_CONFIG_WRITE=y
-
-# Remove support for configuration blobs to reduce code size by about 1.5 kB.
-#CONFIG_NO_CONFIG_BLOBS=y
-
-# Select program entry point implementation:
-# main = UNIX/POSIX like main() function (default)
-# main_winsvc = Windows service (read parameters from registry)
-# main_none = Very basic example (development use only)
-#CONFIG_MAIN=main
-
-# Select wrapper for operatins system and C library specific functions
-# unix = UNIX/POSIX like systems (default)
-# win32 = Windows systems
-# none = Empty template
-#CONFIG_OS=unix
-
-# Select event loop implementation
-# eloop = select() loop (default)
-# eloop_win = Windows events and WaitForMultipleObject() loop
-# eloop_none = Empty template
-#CONFIG_ELOOP=eloop
-
-# Select layer 2 packet implementation
-# linux = Linux packet socket (default)
-# pcap = libpcap/libdnet/WinPcap
-# freebsd = FreeBSD libpcap
-# winpcap = WinPcap with receive thread
-# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
-# none = Empty template
-#CONFIG_L2_PACKET=linux
-
-# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
-# CONFIG_PEERKEY=y
-
-# IEEE 802.11w (management frame protection)
-# This version is an experimental implementation based on IEEE 802.11w/D1.0
-# draft and is subject to change since the standard has not yet been finalized.
-# Driver support is also needed for IEEE 802.11w.
-#CONFIG_IEEE80211W=y
-
-# Select TLS implementation
-# openssl = OpenSSL (default)
-# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
-# internal = Internal TLSv1 implementation (experimental)
-# none = Empty template
-CONFIG_TLS=internal
-
-# Whether to enable TLS/IA support, which is required for EAP-TTLSv1.
-# You need CONFIG_TLS=gnutls for this to have any effect. Please note that
-# even though the core GnuTLS library is released under LGPL, this extra
-# library uses GPL and as such, the terms of GPL apply to the combination
-# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not
-# apply for distribution of the resulting binary.
-#CONFIG_GNUTLS_EXTRA=y
-
-# If CONFIG_TLS=internal is used, additional library and include paths are
-# needed for LibTomMath. Alternatively, an integrated, minimal version of
-# LibTomMath can be used. See beginning of libtommath.c for details on benefits
-# and drawbacks of this option.
-#CONFIG_INTERNAL_LIBTOMMATH=y
-#ifndef CONFIG_INTERNAL_LIBTOMMATH
-#LTM_PATH=/usr/src/libtommath-0.39
-#CFLAGS += -I$(LTM_PATH)
-#LIBS += -L$(LTM_PATH)
-#LIBS_p += -L$(LTM_PATH)
-#endif
-# At the cost of about 4 kB of additional binary size, the internal LibTomMath
-# can be configured to include faster routines for exptmod, sqr, and div to
-# speed up DH and RSA calculation considerably
-#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
-
-# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
-# This is only for Windows builds and requires WMI-related header files and
-# WbemUuid.Lib from Platform SDK even when building with MinGW.
-#CONFIG_NDIS_EVENTS_INTEGRATED=y
-#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
-
-# Add support for old DBus control interface
-# (fi.epitest.hostap.WPASupplicant)
-#CONFIG_CTRL_IFACE_DBUS=y
-
-# Add support for new DBus control interface
-# (fi.w1.hostap.wpa_supplicant1)
-#CONFIG_CTRL_IFACE_DBUS_NEW=y
-
-# Add introspection support for new DBus control interface
-#CONFIG_CTRL_IFACE_DBUS_INTRO=y
-
-# Add support for loading EAP methods dynamically as shared libraries.
-# When this option is enabled, each EAP method can be either included
-# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
-# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
-# be loaded in the beginning of the wpa_supplicant configuration file
-# (see load_dynamic_eap parameter in the example file) before being used in
-# the network blocks.
-#
-# Note that some shared parts of EAP methods are included in the main program
-# and in order to be able to use dynamic EAP methods using these parts, the
-# main program must have been build with the EAP method enabled (=y or =dyn).
-# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
-# unless at least one of them was included in the main build to force inclusion
-# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
-# in the main build to be able to load these methods dynamically.
-#
-# Please also note that using dynamic libraries will increase the total binary
-# size. Thus, it may not be the best option for targets that have limited
-# amount of memory/flash.
-#CONFIG_DYNAMIC_EAP_METHODS=y
-
-# IEEE Std 802.11r-2008 (Fast BSS Transition)
-#CONFIG_IEEE80211R=y
-
-# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
-#CONFIG_DEBUG_FILE=y
-
-# Enable privilege separation (see README 'Privilege separation' for details)
-#CONFIG_PRIVSEP=y
-
-# Enable mitigation against certain attacks against TKIP by delaying Michael
-# MIC error reports by a random amount of time between 0 and 60 seconds
-#CONFIG_DELAYED_MIC_ERROR_REPORT=y
-
-# Enable tracing code for developer debugging
-# This tracks use of memory allocations and other registrations and reports
-# incorrect use with a backtrace of call (or allocation) location.
-#CONFIG_WPA_TRACE=y
-# For BSD, comment out these.
-#LIBS += -lexecinfo
-#LIBS_p += -lexecinfo
-#LIBS_c += -lexecinfo
-
-# Use libbfd to get more details for developer debugging
-# This enables use of libbfd to get more detailed symbols for the backtraces
-# generated by CONFIG_WPA_TRACE=y.
-#CONFIG_WPA_TRACE_BFD=y
-# For BSD, comment out these.
-#LIBS += -lbfd -liberty -lz
-#LIBS_p += -lbfd -liberty -lz
-#LIBS_c += -lbfd -liberty -lz
-
-NEED_80211_COMMON=y
diff --git a/package/hostapd/files/wpa_supplicant.sh b/package/hostapd/files/wpa_supplicant.sh
deleted file mode 100644
index 928243e42..000000000
--- a/package/hostapd/files/wpa_supplicant.sh
+++ /dev/null
@@ -1,199 +0,0 @@
-wpa_supplicant_setup_vif() {
- local vif="$1"
- local driver="$2"
- local key="$key"
- local options="$3"
- local freq=""
- local ht="$5"
- local ap_scan=""
- local scan_ssid="1"
- [ -n "$4" ] && freq="frequency=$4"
-
- # make sure we have the encryption type and the psk
- [ -n "$enc" ] || {
- config_get enc "$vif" encryption
- }
- [ -n "$key" ] || {
- config_get key "$vif" key
- }
-
- local net_cfg bridge
- config_get bridge "$vif" bridge
- [ -z "$bridge" ] && {
- net_cfg="$(find_net_config "$vif")"
- [ -z "$net_cfg" ] || bridge="$(bridge_interface "$net_cfg")"
- config_set "$vif" bridge "$bridge"
- }
-
- local mode ifname wds modestr=""
- config_get mode "$vif" mode
- config_get ifname "$vif" ifname
- config_get_bool wds "$vif" wds 0
- [ -z "$bridge" ] || [ "$mode" = ap ] || [ "$mode" = sta -a $wds -eq 1 ] || {
- echo "wpa_supplicant_setup_vif($ifname): Refusing to bridge $mode mode interface"
- return 1
- }
- [ "$mode" = "adhoc" ] && {
- modestr="mode=1"
- scan_ssid="0"
- ap_scan="ap_scan=2"
- }
-
- key_mgmt='NONE'
- case "$enc" in
- *none*) ;;
- *wep*)
- config_get key "$vif" key
- key="${key:-1}"
- case "$key" in
- [1234])
- for idx in 1 2 3 4; do
- local zidx
- zidx=$(($idx - 1))
- config_get ckey "$vif" "key${idx}"
- [ -n "$ckey" ] && \
- append "wep_key${zidx}" "wep_key${zidx}=$(prepare_key_wep "$ckey")"
- done
- wep_tx_keyidx="wep_tx_keyidx=$((key - 1))"
- ;;
- *)
- wep_key0="wep_key0=$(prepare_key_wep "$key")"
- wep_tx_keyidx="wep_tx_keyidx=0"
- ;;
- esac
- ;;
- *psk*)
- key_mgmt='WPA-PSK'
- # if you want to use PSK with a non-nl80211 driver you
- # have to use WPA-NONE and wext driver for wpa_s
- [ "$mode" = "adhoc" -a "$driver" != "nl80211" ] && {
- key_mgmt='WPA-NONE'
- driver='wext'
- }
- if [ ${#key} -eq 64 ]; then
- passphrase="psk=${key}"
- else
- passphrase="psk=\"${key}\""
- fi
- case "$enc" in
- *psk2*)
- proto='proto=RSN'
- config_get ieee80211w "$vif" ieee80211w
- ;;
- *psk*)
- proto='proto=WPA'
- ;;
- esac
- ;;
- *wpa*|*8021x*)
- proto='proto=WPA2'
- key_mgmt='WPA-EAP'
- config_get ieee80211w "$vif" ieee80211w
- config_get ca_cert "$vif" ca_cert
- config_get eap_type "$vif" eap_type
- ca_cert=${ca_cert:+"ca_cert=\"$ca_cert\""}
- case "$eap_type" in
- tls)
- pairwise='pairwise=CCMP'
- group='group=CCMP'
- config_get identity "$vif" identity
- config_get client_cert "$vif" client_cert
- config_get priv_key "$vif" priv_key
- config_get priv_key_pwd "$vif" priv_key_pwd
- identity="identity=\"$identity\""
- client_cert="client_cert=\"$client_cert\""
- priv_key="private_key=\"$priv_key\""
- priv_key_pwd="private_key_passwd=\"$priv_key_pwd\""
- ;;
- peap|ttls)
- config_get auth "$vif" auth
- config_get identity "$vif" identity
- config_get password "$vif" password
- phase2="phase2=\"auth=${auth:-MSCHAPV2}\""
- identity="identity=\"$identity\""
- password="password=\"$password\""
- ;;
- esac
- eap_type="eap=$(echo $eap_type | tr 'a-z' 'A-Z')"
- ;;
- esac
-
- case "$ieee80211w" in
- [012])
- ieee80211w="ieee80211w=$ieee80211w"
- ;;
- esac
-
- local fixed_freq bssid1 beacon_interval brates mrate
- config_get ifname "$vif" ifname
- config_get bridge "$vif" bridge
- config_get ssid "$vif" ssid
- config_get bssid "$vif" bssid
- bssid1=${bssid:+"bssid=$bssid"}
- beacon_interval=${beacon_int:+"beacon_interval=$beacon_int"}
-
- local br brval brsub brstr
- [ -n "$basic_rate_list" ] && {
- for br in $basic_rate_list; do
- brval="$(($br / 1000))"
- brsub="$((($br / 100) % 10))"
- [ "$brsub" -gt 0 ] && brval="$brval.$brsub"
- [ -n "$brstr" ] && brstr="$brstr,"
- brstr="$brstr$brval"
- done
- brates=${basic_rate_list:+"rates=$brstr"}
- }
-
- local mcval=""
- [ -n "$mcast_rate" ] && {
- mcval="$(($mcast_rate / 1000))"
- mcsub="$(( ($mcast_rate / 100) % 10 ))"
- [ "$mcsub" -gt 0 ] && mcval="$mcval.$mcsub"
- mrate=${mcast_rate:+"mcast_rate=$mcval"}
- }
-
- local ht_str
- [ -n "$ht" ] && ht_str="htmode=$ht"
-
- rm -rf /var/run/wpa_supplicant-$ifname
- cat > /var/run/wpa_supplicant-$ifname.conf <<EOF
-ctrl_interface=/var/run/wpa_supplicant-$ifname
-$ap_scan
-network={
- $modestr
- scan_ssid=$scan_ssid
- ssid="$ssid"
- $bssid1
- key_mgmt=$key_mgmt
- $proto
- $freq
- ${fixed:+"fixed_freq=1"}
- $beacon_interval
- $brates
- $mrate
- $ht_str
- $ieee80211w
- $passphrase
- $pairwise
- $group
- $eap_type
- $ca_cert
- $client_cert
- $priv_key
- $priv_key_pwd
- $phase2
- $identity
- $password
- $wep_key0
- $wep_key1
- $wep_key2
- $wep_key3
- $wep_tx_keyidx
-}
-EOF
- if [ -n "$proto" -o "$key_mgmt" == "NONE" ]; then
- wpa_supplicant ${bridge:+ -b $bridge} -B -P "/var/run/wifi-${ifname}.pid" -D ${driver:-wext} -i "$ifname" -c /var/run/wpa_supplicant-$ifname.conf $options
- else
- return 0
- fi
-}
diff --git a/package/hostapd/files/wps-hotplug.sh b/package/hostapd/files/wps-hotplug.sh
deleted file mode 100644
index b5376cc55..000000000
--- a/package/hostapd/files/wps-hotplug.sh
+++ /dev/null
@@ -1,6 +0,0 @@
-if [ "$ACTION" = "pressed" -a "$BUTTON" = "wps" ]; then
- for dir in /var/run/hostapd-*; do
- [ -d "$dir" ] || continue
- hostapd_cli -p "$dir" wps_pbc
- done
-fi
diff --git a/package/hostapd/patches/100-pending_work.patch b/package/hostapd/patches/100-pending_work.patch
deleted file mode 100644
index 1c97a64ca..000000000
--- a/package/hostapd/patches/100-pending_work.patch
+++ /dev/null
@@ -1,123 +0,0 @@
---- a/src/ap/ieee802_11.c
-+++ b/src/ap/ieee802_11.c
-@@ -1506,13 +1506,6 @@ static void handle_assoc_cb(struct hosta
- int new_assoc = 1;
- struct ieee80211_ht_capabilities ht_cap;
-
-- if (!ok) {
-- hostapd_logger(hapd, mgmt->da, HOSTAPD_MODULE_IEEE80211,
-- HOSTAPD_LEVEL_DEBUG,
-- "did not acknowledge association response");
-- return;
-- }
--
- if (len < IEEE80211_HDRLEN + (reassoc ? sizeof(mgmt->u.reassoc_resp) :
- sizeof(mgmt->u.assoc_resp))) {
- printf("handle_assoc_cb(reassoc=%d) - too short payload "
-@@ -1520,11 +1513,6 @@ static void handle_assoc_cb(struct hosta
- return;
- }
-
-- if (reassoc)
-- status = le_to_host16(mgmt->u.reassoc_resp.status_code);
-- else
-- status = le_to_host16(mgmt->u.assoc_resp.status_code);
--
- sta = ap_get_sta(hapd, mgmt->da);
- if (!sta) {
- printf("handle_assoc_cb: STA " MACSTR " not found\n",
-@@ -1532,6 +1520,19 @@ static void handle_assoc_cb(struct hosta
- return;
- }
-
-+ if (!ok) {
-+ hostapd_logger(hapd, mgmt->da, HOSTAPD_MODULE_IEEE80211,
-+ HOSTAPD_LEVEL_DEBUG,
-+ "did not acknowledge association response");
-+ sta->flags &= ~WLAN_STA_ASSOC_REQ_OK;
-+ return;
-+ }
-+
-+ if (reassoc)
-+ status = le_to_host16(mgmt->u.reassoc_resp.status_code);
-+ else
-+ status = le_to_host16(mgmt->u.assoc_resp.status_code);
-+
- if (status != WLAN_STATUS_SUCCESS)
- goto fail;
-
-@@ -1830,6 +1831,9 @@ void ieee802_11_rx_from_unknown(struct h
-
- sta = ap_get_sta(hapd, src);
- if (sta && (sta->flags & WLAN_STA_ASSOC)) {
-+ if (!hapd->conf->wds_sta)
-+ return;
-+
- if (wds && !(sta->flags & WLAN_STA_WDS)) {
- wpa_printf(MSG_DEBUG, "Enable 4-address WDS mode for "
- "STA " MACSTR " (aid %u)",
---- a/src/drivers/driver_nl80211.c
-+++ b/src/drivers/driver_nl80211.c
-@@ -2661,10 +2661,10 @@ static int wpa_driver_nl80211_capa(struc
- drv->data_tx_status = info.data_tx_status;
-
- /*
-- * If poll command is supported mac80211 is new enough to
-- * have everything we need to not need monitor interfaces.
-+ * If poll command and tx status are supported, mac80211 is new enough
-+ * to have everything we need to not need monitor interfaces.
- */
-- drv->use_monitor = !info.poll_command_supported;
-+ drv->use_monitor = !info.poll_command_supported || !info.data_tx_status;
-
- if (drv->device_ap_sme && drv->use_monitor) {
- /*
-@@ -6392,8 +6392,8 @@ static int wpa_driver_nl80211_hapd_send_
- pos = (u8 *) (hdr + 1);
-
- if (qos) {
-- /* add an empty QoS header if needed */
-- pos[0] = 0;
-+ /* Set highest priority in QoS header */
-+ pos[0] = 7;
- pos[1] = 0;
- pos += 2;
- }
-@@ -7698,6 +7698,10 @@ static int i802_set_wds_sta(void *priv,
- }
- return i802_set_sta_vlan(priv, addr, name, 0);
- } else {
-+ if (bridge_ifname)
-+ linux_br_del_if(drv->global->ioctl_sock, bridge_ifname,
-+ name);
-+
- i802_set_sta_vlan(priv, addr, bss->ifname, 0);
- return wpa_driver_nl80211_if_remove(priv, WPA_IF_AP_VLAN,
- name);
-@@ -8065,7 +8069,12 @@ static int wpa_driver_nl80211_if_remove(
- if (ifindex <= 0)
- return -1;
-
-+ nl80211_remove_iface(drv, ifindex);
-+
- #ifdef HOSTAPD
-+ if (type != WPA_IF_AP_BSS)
-+ return 0;
-+
- if (bss->added_if_into_bridge) {
- if (linux_br_del_if(drv->global->ioctl_sock, bss->brname,
- bss->ifname) < 0)
-@@ -8079,13 +8088,6 @@ static int wpa_driver_nl80211_if_remove(
- "bridge %s: %s",
- bss->brname, strerror(errno));
- }
--#endif /* HOSTAPD */
--
-- nl80211_remove_iface(drv, ifindex);
--
--#ifdef HOSTAPD
-- if (type != WPA_IF_AP_BSS)
-- return 0;
-
- if (bss != &drv->first_bss) {
- struct i802_bss *tbss;
diff --git a/package/hostapd/patches/300-nl80211_multicall_fixes.patch b/package/hostapd/patches/300-nl80211_multicall_fixes.patch
deleted file mode 100644
index 1d2519a93..000000000
--- a/package/hostapd/patches/300-nl80211_multicall_fixes.patch
+++ /dev/null
@@ -1,60 +0,0 @@
---- a/src/drivers/driver_nl80211.c
-+++ b/src/drivers/driver_nl80211.c
-@@ -2988,6 +2988,7 @@ static void * wpa_driver_nl80211_init(vo
- drv->monitor_sock = -1;
- drv->eapol_tx_sock = -1;
- drv->ap_scan_as_station = NL80211_IFTYPE_UNSPECIFIED;
-+ drv->nlmode = NL80211_IFTYPE_STATION;
-
- if (wpa_driver_nl80211_init_nl(drv)) {
- os_free(drv);
-@@ -3302,17 +3303,12 @@ static void wpa_driver_nl80211_send_rfki
- wpa_supplicant_event(timeout_ctx, EVENT_INTERFACE_DISABLED, NULL);
- }
-
--
- static int
--wpa_driver_nl80211_finish_drv_init(struct wpa_driver_nl80211_data *drv)
-+wpa_driver_nl80211_finish_drv_init_sta(struct wpa_driver_nl80211_data *drv,
-+ int *send_rfkill_event)
- {
- struct i802_bss *bss = &drv->first_bss;
-- int send_rfkill_event = 0;
-
-- drv->ifindex = if_nametoindex(bss->ifname);
-- drv->first_bss.ifindex = drv->ifindex;
--
--#ifndef HOSTAPD
- /*
- * Make sure the interface starts up in station mode unless this is a
- * dynamically added interface (e.g., P2P) that was already configured
-@@ -3331,7 +3327,7 @@ wpa_driver_nl80211_finish_drv_init(struc
- "interface '%s' due to rfkill",
- bss->ifname);
- drv->if_disabled = 1;
-- send_rfkill_event = 1;
-+ *send_rfkill_event = 1;
- } else {
- wpa_printf(MSG_ERROR, "nl80211: Could not set "
- "interface '%s' UP", bss->ifname);
-@@ -3341,7 +3337,19 @@ wpa_driver_nl80211_finish_drv_init(struc
-
- netlink_send_oper_ifla(drv->global->netlink, drv->ifindex,
- 1, IF_OPER_DORMANT);
--#endif /* HOSTAPD */
-+}
-+
-+static int
-+wpa_driver_nl80211_finish_drv_init(struct wpa_driver_nl80211_data *drv)
-+{
-+ struct i802_bss *bss = &drv->first_bss;
-+ int send_rfkill_event = 0;
-+
-+ drv->ifindex = if_nametoindex(bss->ifname);
-+ drv->first_bss.ifindex = drv->ifindex;
-+
-+ if (drv->nlmode == NL80211_IFTYPE_STATION)
-+ wpa_driver_nl80211_finish_drv_init_sta(drv, &send_rfkill_event);
-
- if (wpa_driver_nl80211_capa(drv))
- return -1;
diff --git a/package/hostapd/patches/310-multicall_bridge_fix.patch b/package/hostapd/patches/310-multicall_bridge_fix.patch
deleted file mode 100644
index 59bfe5177..000000000
--- a/package/hostapd/patches/310-multicall_bridge_fix.patch
+++ /dev/null
@@ -1,45 +0,0 @@
---- a/src/drivers/driver_nl80211.c
-+++ b/src/drivers/driver_nl80211.c
-@@ -893,6 +893,10 @@ static void wpa_driver_nl80211_event_rtm
- return;
- }
-
-+ if (ifi->ifi_family == AF_BRIDGE &&
-+ drv->nlmode != NL80211_IFTYPE_AP)
-+ return;
-+
- wpa_printf(MSG_DEBUG, "RTM_NEWLINK: operstate=%d ifi_flags=0x%x "
- "(%s%s%s%s)",
- drv->operstate, ifi->ifi_flags,
-@@ -1000,6 +1004,10 @@ static void wpa_driver_nl80211_event_rtm
- attrlen = len;
- attr = (struct rtattr *) buf;
-
-+ if (ifi->ifi_family == AF_BRIDGE &&
-+ drv->nlmode != NL80211_IFTYPE_AP)
-+ return;
-+
- rta_len = RTA_ALIGN(sizeof(struct rtattr));
- while (RTA_OK(attr, attrlen)) {
- if (attr->rta_type == IFLA_IFNAME) {
-@@ -2990,6 +2998,11 @@ static void * wpa_driver_nl80211_init(vo
- drv->ap_scan_as_station = NL80211_IFTYPE_UNSPECIFIED;
- drv->nlmode = NL80211_IFTYPE_STATION;
-
-+#ifdef HOSTAPD
-+ drv->num_if_indices = sizeof(drv->default_if_indices) / sizeof(int);
-+ drv->if_indices = drv->default_if_indices;
-+#endif
-+
- if (wpa_driver_nl80211_init_nl(drv)) {
- os_free(drv);
- return NULL;
-@@ -7819,8 +7832,6 @@ static void *i802_init(struct hostapd_da
- br_ifindex = 0;
- }
-
-- drv->num_if_indices = sizeof(drv->default_if_indices) / sizeof(int);
-- drv->if_indices = drv->default_if_indices;
- for (i = 0; i < params->num_bridge; i++) {
- if (params->bridge[i]) {
- ifindex = if_nametoindex(params->bridge[i]);
diff --git a/package/hostapd/patches/320-madwifi_key_fixes.patch b/package/hostapd/patches/320-madwifi_key_fixes.patch
deleted file mode 100644
index 45a7ac6c8..000000000
--- a/package/hostapd/patches/320-madwifi_key_fixes.patch
+++ /dev/null
@@ -1,34 +0,0 @@
---- a/src/drivers/driver_madwifi.c
-+++ b/src/drivers/driver_madwifi.c
-@@ -453,7 +453,9 @@ wpa_driver_madwifi_set_key(const char *i
-
- memset(&wk, 0, sizeof(wk));
- wk.ik_type = cipher;
-- wk.ik_flags = IEEE80211_KEY_RECV | IEEE80211_KEY_XMIT;
-+ wk.ik_flags = IEEE80211_KEY_RECV;
-+ if (set_tx)
-+ wk.ik_flags |= IEEE80211_KEY_XMIT;
- if (addr == NULL || is_broadcast_ether_addr(addr)) {
- memset(wk.ik_macaddr, 0xff, IEEE80211_ADDR_LEN);
- wk.ik_keyix = key_idx;
-@@ -465,6 +467,20 @@ wpa_driver_madwifi_set_key(const char *i
- wk.ik_keylen = key_len;
- memcpy(wk.ik_keydata, key, key_len);
-
-+#ifdef WORDS_BIGENDIAN
-+#define WPA_KEY_RSC_LEN 8
-+ {
-+ size_t i;
-+ u8 tmp[WPA_KEY_RSC_LEN];
-+ os_memset(tmp, 0, sizeof(tmp));
-+ for (i = 0; i < seq_len; i++)
-+ tmp[WPA_KEY_RSC_LEN - i - 1] = seq[i];
-+ os_memcpy(&wk.ik_keyrsc, tmp, WPA_KEY_RSC_LEN);
-+ }
-+#else /* WORDS_BIGENDIAN */
-+ os_memcpy(&wk.ik_keyrsc, seq, seq_len);
-+#endif /* WORDS_BIGENDIAN */
-+
- ret = set80211priv(drv, IEEE80211_IOCTL_SETKEY, &wk, sizeof(wk));
- if (ret < 0) {
- wpa_printf(MSG_DEBUG, "%s: Failed to set key (addr %s"
diff --git a/package/hostapd/patches/400-noscan.patch b/package/hostapd/patches/400-noscan.patch
deleted file mode 100644
index 69d026b3d..000000000
--- a/package/hostapd/patches/400-noscan.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/hostapd/config_file.c
-+++ b/hostapd/config_file.c
-@@ -2485,6 +2485,8 @@ static int hostapd_config_fill(struct ho
- }
- #endif /* CONFIG_IEEE80211W */
- #ifdef CONFIG_IEEE80211N
-+ } else if (os_strcmp(buf, "noscan") == 0) {
-+ conf->noscan = atoi(pos);
- } else if (os_strcmp(buf, "ieee80211n") == 0) {
- conf->ieee80211n = atoi(pos);
- } else if (os_strcmp(buf, "ht_capab") == 0) {
---- a/src/ap/ap_config.h
-+++ b/src/ap/ap_config.h
-@@ -497,6 +497,7 @@ struct hostapd_config {
-
- int ht_op_mode_fixed;
- u16 ht_capab;
-+ int noscan;
- int ieee80211n;
- int secondary_channel;
- int require_ht;
---- a/src/ap/hw_features.c
-+++ b/src/ap/hw_features.c
-@@ -493,7 +493,7 @@ static int ieee80211n_check_40mhz(struct
- {
- struct wpa_driver_scan_params params;
-
-- if (!iface->conf->secondary_channel)
-+ if (!iface->conf->secondary_channel || iface->conf->noscan)
- return 0; /* HT40 not used */
-
- wpa_printf(MSG_DEBUG, "Scan for neighboring BSSes prior to enabling "
diff --git a/package/hostapd/patches/410-multicall.patch b/package/hostapd/patches/410-multicall.patch
deleted file mode 100644
index 7900428ae..000000000
--- a/package/hostapd/patches/410-multicall.patch
+++ /dev/null
@@ -1,246 +0,0 @@
---- a/hostapd/Makefile
-+++ b/hostapd/Makefile
-@@ -14,6 +14,7 @@ CFLAGS += -I../src/utils
- # CFLAGS += -DUSE_KERNEL_HEADERS -I/usr/src/linux/include
-
- -include .config
-+-include $(if $(MULTICALL), ../wpa_supplicant/.config)
-
- ifndef CONFIG_OS
- ifdef CONFIG_NATIVE_WINDOWS
-@@ -188,10 +189,14 @@ ifdef CONFIG_IEEE80211AC
- CFLAGS += -DCONFIG_IEEE80211AC
- endif
-
-+ifndef MULTICALL
-+CFLAGS += -DNO_SUPPLICANT
-+endif
-+
- include ../src/drivers/drivers.mak
--OBJS += $(DRV_AP_OBJS)
--CFLAGS += $(DRV_AP_CFLAGS)
--LDFLAGS += $(DRV_AP_LDFLAGS)
-+OBJS += $(sort $(DRV_AP_OBJS) $(if $(MULTICALL),$(DRV_WPA_OBJS)))
-+CFLAGS += $(DRV_AP_CFLAGS) $(if $(MULTICALL),$(DRV_WPA_CFLAGS))
-+LDFLAGS += $(DRV_AP_LDFLAGS) $(if $(MULTICALL),$(DRV_WPA_LDFLAGS))
- LIBS += $(DRV_AP_LIBS)
-
- ifdef CONFIG_L2_PACKET
-@@ -867,6 +872,12 @@ install: all
-
- BCHECK=../src/drivers/build.hostapd
-
-+hostapd_multi.a: $(BCHECK) $(OBJS)
-+ $(Q)$(CC) -c -o hostapd_multi.o -Dmain=hostapd_main $(CFLAGS) main.c
-+ @$(E) " CC " $<
-+ @rm -f $@
-+ @$(AR) cr $@ hostapd_multi.o $(OBJS)
-+
- hostapd: $(BCHECK) $(OBJS)
- $(Q)$(CC) $(LDFLAGS) -o hostapd $(OBJS) $(LIBS)
- @$(E) " LD " $@
-@@ -905,6 +916,12 @@ HOBJS += ../src/crypto/aes-internal.o
- HOBJS += ../src/crypto/aes-internal-enc.o
- endif
-
-+dump_cflags:
-+ @echo -n $(CFLAGS) " "
-+
-+dump_ldflags:
-+ @echo -n $(LDFLAGS) $(LIBS) $(EXTRALIBS) " "
-+
- nt_password_hash: $(NOBJS)
- $(Q)$(CC) $(LDFLAGS) -o nt_password_hash $(NOBJS) $(LIBS_n)
- @$(E) " LD " $@
---- a/wpa_supplicant/Makefile
-+++ b/wpa_supplicant/Makefile
-@@ -14,6 +14,7 @@ CFLAGS += -I../src
- CFLAGS += -I../src/utils
-
- -include .config
-+-include $(if $(MULTICALL),../hostapd/.config)
-
- BINALL=wpa_supplicant wpa_cli
-
-@@ -705,6 +706,10 @@ ifdef CONFIG_DYNAMIC_EAP_METHODS
- CFLAGS += -DCONFIG_DYNAMIC_EAP_METHODS
- LIBS += -ldl -rdynamic
- endif
-+else
-+ ifdef MULTICALL
-+ OBJS += ../src/eap_common/eap_common.o
-+ endif
- endif
-
- ifdef CONFIG_AP
-@@ -713,9 +718,11 @@ NEED_EAP_COMMON=y
- NEED_RSN_AUTHENTICATOR=y
- CFLAGS += -DCONFIG_AP
- OBJS += ap.o
-+ifndef MULTICALL
- CFLAGS += -DCONFIG_NO_RADIUS
- CFLAGS += -DCONFIG_NO_ACCOUNTING
- CFLAGS += -DCONFIG_NO_VLAN
-+endif
- OBJS += ../src/ap/hostapd.o
- OBJS += ../src/ap/wpa_auth_glue.o
- OBJS += ../src/ap/utils.o
-@@ -770,10 +777,18 @@ endif
- ifdef CONFIG_HS20
- OBJS += ../src/ap/hs20.o
- endif
-+else
-+ ifdef MULTICALL
-+ OBJS += ../src/eap_server/eap_server.o
-+ OBJS += ../src/eap_server/eap_server_identity.o
-+ OBJS += ../src/eap_server/eap_server_methods.o
-+ endif
- endif
-
- ifdef NEED_RSN_AUTHENTICATOR
-+ifndef MULTICALL
- CFLAGS += -DCONFIG_NO_RADIUS
-+endif
- NEED_AES_WRAP=y
- OBJS += ../src/ap/wpa_auth.o
- OBJS += ../src/ap/wpa_auth_ie.o
-@@ -1515,6 +1530,12 @@ wpa_priv: $(BCHECK) $(OBJS_priv)
-
- $(OBJS_c) $(OBJS_t) $(OBJS_t2) $(OBJS) $(BCHECK) $(EXTRA_progs): .config
-
-+wpa_supplicant_multi.a: .config $(BCHECK) $(OBJS) $(EXTRA_progs)
-+ $(Q)$(CC) -c -o wpa_supplicant_multi.o -Dmain=wpa_supplicant_main $(CFLAGS) main.c
-+ @$(E) " CC " $<
-+ @rm -f $@
-+ @$(AR) cr $@ wpa_supplicant_multi.o $(OBJS)
-+
- wpa_supplicant: $(BCHECK) $(OBJS) $(EXTRA_progs)
- $(Q)$(LDO) $(LDFLAGS) -o wpa_supplicant $(OBJS) $(LIBS) $(EXTRALIBS)
- @$(E) " LD " $@
-@@ -1585,6 +1606,12 @@ eap_ikev2.so: ../src/eap_peer/eap_ikev2.
- %@.service: %.service.arg.in
- sed -e 's|\@BINDIR\@|$(BINDIR)|g' $< >$@
-
-+dump_cflags:
-+ @echo -n $(CFLAGS) " "
-+
-+dump_ldflags:
-+ @echo -n $(LDFLAGS) $(LIBS) $(EXTRALIBS) " "
-+
- wpa_supplicant.exe: wpa_supplicant
- mv -f $< $@
- wpa_cli.exe: wpa_cli
---- a/src/drivers/driver.h
-+++ b/src/drivers/driver.h
-@@ -3686,8 +3686,8 @@ union wpa_event_data {
- * Driver wrapper code should call this function whenever an event is received
- * from the driver.
- */
--void wpa_supplicant_event(void *ctx, enum wpa_event_type event,
-- union wpa_event_data *data);
-+extern void (*wpa_supplicant_event)(void *ctx, enum wpa_event_type event,
-+ union wpa_event_data *data);
-
-
- /*
---- a/src/ap/drv_callbacks.c
-+++ b/src/ap/drv_callbacks.c
-@@ -685,8 +685,8 @@ static void hostapd_event_eapol_rx(struc
- }
-
-
--void wpa_supplicant_event(void *ctx, enum wpa_event_type event,
-- union wpa_event_data *data)
-+void hostapd_wpa_event(void *ctx, enum wpa_event_type event,
-+ union wpa_event_data *data)
- {
- struct hostapd_data *hapd = ctx;
- #ifndef CONFIG_NO_STDOUT_DEBUG
---- a/wpa_supplicant/wpa_priv.c
-+++ b/wpa_supplicant/wpa_priv.c
-@@ -819,8 +819,8 @@ static void wpa_priv_send_ft_response(st
- }
-
-
--void wpa_supplicant_event(void *ctx, enum wpa_event_type event,
-- union wpa_event_data *data)
-+static void supplicant_event(void *ctx, enum wpa_event_type event,
-+ union wpa_event_data *data)
- {
- struct wpa_priv_interface *iface = ctx;
-
-@@ -962,6 +962,7 @@ int main(int argc, char *argv[])
- if (os_program_init())
- return -1;
-
-+ wpa_supplicant_event = supplicant_event;
- wpa_priv_fd_workaround();
-
- for (;;) {
---- a/wpa_supplicant/events.c
-+++ b/wpa_supplicant/events.c
-@@ -2258,8 +2258,8 @@ static void wnm_action_rx(struct wpa_sup
- }
-
-
--void wpa_supplicant_event(void *ctx, enum wpa_event_type event,
-- union wpa_event_data *data)
-+void supplicant_event(void *ctx, enum wpa_event_type event,
-+ union wpa_event_data *data)
- {
- struct wpa_supplicant *wpa_s = ctx;
- u16 reason_code = 0;
---- a/wpa_supplicant/wpa_supplicant.c
-+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -2921,6 +2921,9 @@ static void wpa_supplicant_deinit_iface(
- }
- }
-
-+extern void supplicant_event(void *ctx, enum wpa_event_type event,
-+ union wpa_event_data *data);
-+
-
- /**
- * wpa_supplicant_add_iface - Add a new network interface
-@@ -3113,6 +3116,7 @@ struct wpa_global * wpa_supplicant_init(
- wpa_msg_register_ifname_cb(wpa_supplicant_msg_ifname_cb);
- #endif /* CONFIG_NO_WPA_MSG */
-
-+ wpa_supplicant_event = supplicant_event;
- wpa_debug_open_file(params->wpa_debug_file_path);
- if (params->wpa_debug_syslog)
- wpa_debug_open_syslog();
---- a/hostapd/main.c
-+++ b/hostapd/main.c
-@@ -530,6 +530,9 @@ static int hostapd_get_global_ctrl_iface
- return 0;
- }
-
-+void hostapd_wpa_event(void *ctx, enum wpa_event_type event,
-+ union wpa_event_data *data);
-+
-
- int main(int argc, char *argv[])
- {
-@@ -555,6 +558,7 @@ int main(int argc, char *argv[])
- interfaces.global_iface_name = NULL;
- interfaces.global_ctrl_sock = -1;
-
-+ wpa_supplicant_event = hostapd_wpa_event;
- for (;;) {
- c = getopt(argc, argv, "Bde:f:hKP:tvg:");
- if (c < 0)
---- a/src/drivers/drivers.c
-+++ b/src/drivers/drivers.c
-@@ -7,7 +7,11 @@
- */
-
- #include "includes.h"
-+#include "common.h"
-+#include "driver.h"
-
-+void (*wpa_supplicant_event)(void *ctx, enum wpa_event_type event,
-+ union wpa_event_data *data);
-
- #ifdef CONFIG_DRIVER_WEXT
- extern struct wpa_driver_ops wpa_driver_wext_ops; /* driver_wext.c */
diff --git a/package/hostapd/patches/420-timestamp_check.patch b/package/hostapd/patches/420-timestamp_check.patch
deleted file mode 100644
index b2d4a0511..000000000
--- a/package/hostapd/patches/420-timestamp_check.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/src/tls/x509v3.c
-+++ b/src/tls/x509v3.c
-@@ -1848,6 +1848,9 @@ int x509_certificate_chain_validate(stru
- if (chain_trusted)
- continue;
-
-+#ifdef NO_TIMESTAMP_CHECK
-+ disable_time_checks = 1;
-+#endif
- if (!disable_time_checks &&
- ((unsigned long) now.sec <
- (unsigned long) cert->not_before ||
diff --git a/package/hostapd/patches/430-rescan_immediately.patch b/package/hostapd/patches/430-rescan_immediately.patch
deleted file mode 100644
index 51d41f800..000000000
--- a/package/hostapd/patches/430-rescan_immediately.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/wpa_supplicant/wpa_supplicant.c
-+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -2388,7 +2388,7 @@ static struct wpa_supplicant * wpa_suppl
- if (wpa_s == NULL)
- return NULL;
- wpa_s->scan_req = 1;
-- wpa_s->scan_interval = 5;
-+ wpa_s->scan_interval = 1;
- wpa_s->new_connection = 1;
- wpa_s->parent = wpa_s;
- wpa_s->sched_scanning = 0;
diff --git a/package/hostapd/patches/440-optional_rfkill.patch b/package/hostapd/patches/440-optional_rfkill.patch
deleted file mode 100644
index be18458b2..000000000
--- a/package/hostapd/patches/440-optional_rfkill.patch
+++ /dev/null
@@ -1,261 +0,0 @@
---- a/src/drivers/driver_nl80211.c
-+++ b/src/drivers/driver_nl80211.c
-@@ -218,7 +218,9 @@ struct wpa_driver_nl80211_data {
- int if_removed;
- int if_disabled;
- int ignore_if_down_event;
-+#ifdef CONFIG_RFKILL
- struct rfkill_data *rfkill;
-+#endif
- struct wpa_driver_capa capa;
- int has_capability;
-
-@@ -2828,7 +2830,7 @@ static int wpa_driver_nl80211_init_nl(st
- return 0;
- }
-
--
-+#ifdef CONFIG_RFKILL
- static void wpa_driver_nl80211_rfkill_blocked(void *ctx)
- {
- wpa_printf(MSG_DEBUG, "nl80211: RFKILL blocked");
-@@ -2851,6 +2853,7 @@ static void wpa_driver_nl80211_rfkill_un
- }
- /* rtnetlink ifup handler will report interface as enabled */
- }
-+#endif /* CONFIG_RFKILL */
-
-
- static void nl80211_get_phy_name(struct wpa_driver_nl80211_data *drv)
-@@ -2979,7 +2982,9 @@ static void * wpa_driver_nl80211_init(vo
- void *global_priv)
- {
- struct wpa_driver_nl80211_data *drv;
-+#ifdef CONFIG_RFKILL
- struct rfkill_config *rcfg;
-+#endif
- struct i802_bss *bss;
-
- if (global_priv == NULL)
-@@ -3013,6 +3018,7 @@ static void * wpa_driver_nl80211_init(vo
-
- nl80211_get_phy_name(drv);
-
-+#ifdef CONFIG_RFKILL
- rcfg = os_zalloc(sizeof(*rcfg));
- if (rcfg == NULL)
- goto failed;
-@@ -3025,6 +3031,7 @@ static void * wpa_driver_nl80211_init(vo
- wpa_printf(MSG_DEBUG, "nl80211: RFKILL status not available");
- os_free(rcfg);
- }
-+#endif /* CONFIG_RFKILL */
-
- if (wpa_driver_nl80211_finish_drv_init(drv))
- goto failed;
-@@ -3311,10 +3318,12 @@ static void nl80211_mgmt_unsubscribe(str
- }
-
-
-+#ifdef CONFIG_RFKILL
- static void wpa_driver_nl80211_send_rfkill(void *eloop_ctx, void *timeout_ctx)
- {
- wpa_supplicant_event(timeout_ctx, EVENT_INTERFACE_DISABLED, NULL);
- }
-+#endif /* CONFIG_RFKILL */
-
- static int
- wpa_driver_nl80211_finish_drv_init_sta(struct wpa_driver_nl80211_data *drv,
-@@ -3335,13 +3344,16 @@ wpa_driver_nl80211_finish_drv_init_sta(s
- }
-
- if (linux_set_iface_flags(drv->global->ioctl_sock, bss->ifname, 1)) {
-+#ifdef CONFIG_RFKILL
- if (rfkill_is_blocked(drv->rfkill)) {
- wpa_printf(MSG_DEBUG, "nl80211: Could not yet enable "
- "interface '%s' due to rfkill",
- bss->ifname);
- drv->if_disabled = 1;
- *send_rfkill_event = 1;
-- } else {
-+ } else
-+#endif
-+ {
- wpa_printf(MSG_ERROR, "nl80211: Could not set "
- "interface '%s' UP", bss->ifname);
- return -1;
-@@ -3372,8 +3384,10 @@ wpa_driver_nl80211_finish_drv_init(struc
- return -1;
-
- if (send_rfkill_event) {
-+#ifdef CONFIG_RFKILL
- eloop_register_timeout(0, 0, wpa_driver_nl80211_send_rfkill,
- drv, drv->ctx);
-+#endif
- }
-
- return 0;
-@@ -3460,7 +3474,9 @@ static void wpa_driver_nl80211_deinit(vo
-
- netlink_send_oper_ifla(drv->global->netlink, drv->ifindex, 0,
- IF_OPER_UP);
-+#ifdef CONFIG_RFKILL
- rfkill_deinit(drv->rfkill);
-+#endif
-
- eloop_cancel_timeout(wpa_driver_nl80211_scan_timeout, drv, drv->ctx);
-
---- a/src/drivers/driver_wext.c
-+++ b/src/drivers/driver_wext.c
-@@ -742,7 +742,7 @@ static void wpa_driver_wext_event_rtm_de
- }
- }
-
--
-+#ifdef CONFIG_RFKILL
- static void wpa_driver_wext_rfkill_blocked(void *ctx)
- {
- wpa_printf(MSG_DEBUG, "WEXT: RFKILL blocked");
-@@ -764,7 +764,7 @@ static void wpa_driver_wext_rfkill_unblo
- }
- /* rtnetlink ifup handler will report interface as enabled */
- }
--
-+#endif /* CONFIG_RFKILL */
-
- static void wext_get_phy_name(struct wpa_driver_wext_data *drv)
- {
-@@ -810,7 +810,9 @@ void * wpa_driver_wext_init(void *ctx, c
- {
- struct wpa_driver_wext_data *drv;
- struct netlink_config *cfg;
-+#ifdef CONFIG_RFKILL
- struct rfkill_config *rcfg;
-+#endif
- char path[128];
- struct stat buf;
-
-@@ -845,6 +847,7 @@ void * wpa_driver_wext_init(void *ctx, c
- goto err2;
- }
-
-+#ifdef CONFIG_RFKILL
- rcfg = os_zalloc(sizeof(*rcfg));
- if (rcfg == NULL)
- goto err3;
-@@ -857,6 +860,7 @@ void * wpa_driver_wext_init(void *ctx, c
- wpa_printf(MSG_DEBUG, "WEXT: RFKILL status not available");
- os_free(rcfg);
- }
-+#endif /* CONFIG_RFKILL */
-
- drv->mlme_sock = -1;
-
-@@ -874,7 +878,9 @@ void * wpa_driver_wext_init(void *ctx, c
- return drv;
-
- err3:
-+#ifdef CONFIG_RFKILL
- rfkill_deinit(drv->rfkill);
-+#endif
- netlink_deinit(drv->netlink);
- err2:
- close(drv->ioctl_sock);
-@@ -884,10 +890,12 @@ err1:
- }
-
-
-+#ifdef CONFIG_RFKILL
- static void wpa_driver_wext_send_rfkill(void *eloop_ctx, void *timeout_ctx)
- {
- wpa_supplicant_event(timeout_ctx, EVENT_INTERFACE_DISABLED, NULL);
- }
-+#endif /* CONFIG_RFKILL */
-
-
- static int wpa_driver_wext_finish_drv_init(struct wpa_driver_wext_data *drv)
-@@ -895,13 +903,16 @@ static int wpa_driver_wext_finish_drv_in
- int send_rfkill_event = 0;
-
- if (linux_set_iface_flags(drv->ioctl_sock, drv->ifname, 1) < 0) {
-+#ifdef CONFIG_RFKILL
- if (rfkill_is_blocked(drv->rfkill)) {
- wpa_printf(MSG_DEBUG, "WEXT: Could not yet enable "
- "interface '%s' due to rfkill",
- drv->ifname);
- drv->if_disabled = 1;
- send_rfkill_event = 1;
-- } else {
-+ } else
-+#endif
-+ {
- wpa_printf(MSG_ERROR, "WEXT: Could not set "
- "interface '%s' UP", drv->ifname);
- return -1;
-@@ -949,8 +960,10 @@ static int wpa_driver_wext_finish_drv_in
- 1, IF_OPER_DORMANT);
-
- if (send_rfkill_event) {
-+#ifdef CONFIG_RFKILL
- eloop_register_timeout(0, 0, wpa_driver_wext_send_rfkill,
- drv, drv->ctx);
-+#endif
- }
-
- return 0;
-@@ -980,7 +993,9 @@ void wpa_driver_wext_deinit(void *priv)
-
- netlink_send_oper_ifla(drv->netlink, drv->ifindex, 0, IF_OPER_UP);
- netlink_deinit(drv->netlink);
-+#ifdef CONFIG_RFKILL
- rfkill_deinit(drv->rfkill);
-+#endif
-
- if (drv->mlme_sock >= 0)
- eloop_unregister_read_sock(drv->mlme_sock);
---- a/src/drivers/drivers.mak
-+++ b/src/drivers/drivers.mak
-@@ -25,7 +25,6 @@ NEED_SME=y
- NEED_AP_MLME=y
- NEED_NETLINK=y
- NEED_LINUX_IOCTL=y
--NEED_RFKILL=y
-
- ifdef CONFIG_LIBNL32
- DRV_LIBS += -lnl-3
-@@ -101,7 +100,6 @@ DRV_WPA_CFLAGS += -DCONFIG_DRIVER_WEXT
- CONFIG_WIRELESS_EXTENSION=y
- NEED_NETLINK=y
- NEED_LINUX_IOCTL=y
--NEED_RFKILL=y
- endif
-
- ifdef CONFIG_DRIVER_NDIS
-@@ -127,7 +125,6 @@ endif
- ifdef CONFIG_WIRELESS_EXTENSION
- DRV_WPA_CFLAGS += -DCONFIG_WIRELESS_EXTENSION
- DRV_WPA_OBJS += ../src/drivers/driver_wext.o
--NEED_RFKILL=y
- endif
-
- ifdef NEED_NETLINK
-@@ -140,6 +137,7 @@ endif
-
- ifdef NEED_RFKILL
- DRV_OBJS += ../src/drivers/rfkill.o
-+DRV_WPA_CFLAGS += -DCONFIG_RFKILL
- endif
-
- ifdef CONFIG_VLAN_NETLINK
---- a/src/drivers/driver_wext.h
-+++ b/src/drivers/driver_wext.h
-@@ -22,7 +22,9 @@ struct wpa_driver_wext_data {
- int ifindex2;
- int if_removed;
- int if_disabled;
-+#ifdef CONFIG_RFKILL
- struct rfkill_data *rfkill;
-+#endif
- u8 *assoc_req_ies;
- size_t assoc_req_ies_len;
- u8 *assoc_resp_ies;
diff --git a/package/hostapd/patches/450-reload_freq_change.patch b/package/hostapd/patches/450-reload_freq_change.patch
deleted file mode 100644
index f11593fcd..000000000
--- a/package/hostapd/patches/450-reload_freq_change.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/src/ap/hostapd.c
-+++ b/src/ap/hostapd.c
-@@ -140,6 +140,20 @@ int hostapd_reload_config(struct hostapd
- oldconf = hapd->iconf;
- iface->conf = newconf;
-
-+ hostapd_select_hw_mode(iface);
-+ iface->freq = hostapd_hw_get_freq(hapd, newconf->channel);
-+
-+ if (hostapd_set_freq(hapd, newconf->hw_mode, iface->freq,
-+ newconf->channel,
-+ newconf->ieee80211n,
-+ newconf->secondary_channel)) {
-+ wpa_printf(MSG_ERROR, "Could not set channel for "
-+ "kernel driver");
-+ }
-+
-+ if (iface->current_mode)
-+ hostapd_prepare_rates(iface, iface->current_mode);
-+
- for (j = 0; j < iface->num_bss; j++) {
- hapd = iface->bss[j];
- hapd->iconf = newconf;
diff --git a/package/hostapd/patches/451-nl80211_del_beacon_bss.patch b/package/hostapd/patches/451-nl80211_del_beacon_bss.patch
deleted file mode 100644
index 801b78b12..000000000
--- a/package/hostapd/patches/451-nl80211_del_beacon_bss.patch
+++ /dev/null
@@ -1,63 +0,0 @@
---- a/src/drivers/driver_nl80211.c
-+++ b/src/drivers/driver_nl80211.c
-@@ -3394,16 +3394,18 @@ wpa_driver_nl80211_finish_drv_init(struc
- }
-
-
--static int wpa_driver_nl80211_del_beacon(struct wpa_driver_nl80211_data *drv)
-+static int wpa_driver_nl80211_del_bss_beacon(struct i802_bss *bss)
- {
-+ struct wpa_driver_nl80211_data *drv = bss->drv;
- struct nl_msg *msg;
-
-+ bss->beacon_set = 0;
- msg = nlmsg_alloc();
- if (!msg)
- return -ENOMEM;
-
- nl80211_cmd(drv, msg, 0, NL80211_CMD_DEL_BEACON);
-- NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, drv->ifindex);
-+ NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, bss->ifindex);
-
- return send_and_recv_msgs(drv, msg, NULL, NULL);
- nla_put_failure:
-@@ -3411,6 +3413,21 @@ static int wpa_driver_nl80211_del_beacon
- return -ENOBUFS;
- }
-
-+static int wpa_driver_nl80211_del_beacon(struct wpa_driver_nl80211_data *drv)
-+{
-+ struct i802_bss *bss;
-+
-+ for (bss = &drv->first_bss; bss; bss = bss->next)
-+ wpa_driver_nl80211_del_bss_beacon(bss);
-+
-+ return 0;
-+}
-+
-+static int wpa_driver_nl80211_stop_ap(void *priv)
-+{
-+ struct i802_bss *bss = priv;
-+ return wpa_driver_nl80211_del_beacon(bss->drv);
-+}
-
- /**
- * wpa_driver_nl80211_deinit - Deinitialize nl80211 driver interface
-@@ -9238,4 +9255,5 @@ const struct wpa_driver_ops wpa_driver_n
- .send_tdls_mgmt = nl80211_send_tdls_mgmt,
- .tdls_oper = nl80211_tdls_oper,
- #endif /* CONFIG_TDLS */
-+ .stop_ap = wpa_driver_nl80211_stop_ap,
- };
---- a/src/drivers/driver.h
-+++ b/src/drivers/driver.h
-@@ -2053,6 +2053,9 @@ struct wpa_driver_ops {
- */
- int (*probe_req_report)(void *priv, int report);
-
-+
-+ int (*stop_ap)(void *priv);
-+
- /**
- * deinit_ap - Deinitialize AP mode
- * @priv: Private driver interface data
diff --git a/package/hostapd/patches/452-ctrl_iface_reload.patch b/package/hostapd/patches/452-ctrl_iface_reload.patch
deleted file mode 100644
index 81dcfedde..000000000
--- a/package/hostapd/patches/452-ctrl_iface_reload.patch
+++ /dev/null
@@ -1,98 +0,0 @@
---- a/hostapd/ctrl_iface.c
-+++ b/hostapd/ctrl_iface.c
-@@ -33,6 +33,7 @@
- #include "wps/wps.h"
- #include "config_file.h"
- #include "ctrl_iface.h"
-+#include "config_file.h"
-
-
- struct wpa_ctrl_dst {
-@@ -43,6 +44,7 @@ struct wpa_ctrl_dst {
- int errors;
- };
-
-+static char *reload_opts = NULL;
-
- static void hostapd_ctrl_iface_send(struct hostapd_data *hapd, int level,
- const char *buf, size_t len);
-@@ -152,6 +154,68 @@ static int hostapd_ctrl_iface_new_sta(st
- return 0;
- }
-
-+static int hostapd_ctrl_iface_set_down(struct hostapd_data *hapd)
-+{
-+ if (hapd->driver->stop_ap)
-+ hapd->driver->stop_ap(hapd->drv_priv);
-+ return 0;
-+}
-+
-+static char *get_option(char *opt, char *str)
-+{
-+ int len = strlen(str);
-+
-+ if (!strncmp(opt, str, len))
-+ return opt + len;
-+ else
-+ return NULL;
-+}
-+
-+static struct hostapd_config *hostapd_ctrl_iface_config_read(const char *fname)
-+{
-+ struct hostapd_config *conf;
-+ char *opt, *val;
-+
-+ conf = hostapd_config_read(fname);
-+ if (!conf)
-+ return NULL;
-+
-+ for (opt = strtok(reload_opts, " ");
-+ opt;
-+ opt = strtok(NULL, " ")) {
-+
-+ if ((val = get_option(opt, "channel=")))
-+ conf->channel = atoi(val);
-+ else if ((val = get_option(opt, "ht_capab=")))
-+ conf->ht_capab = atoi(val);
-+ else if ((val = get_option(opt, "ht_capab_mask=")))
-+ conf->ht_capab &= atoi(val);
-+ else if ((val = get_option(opt, "sec_chan=")))
-+ conf->secondary_channel = atoi(val);
-+ else if ((val = get_option(opt, "hw_mode=")))
-+ conf->hw_mode = atoi(val);
-+ else if ((val = get_option(opt, "ieee80211n=")))
-+ conf->ieee80211n = atoi(val);
-+ else
-+ break;
-+ }
-+
-+ return conf;
-+}
-+
-+static int hostapd_ctrl_iface_update(struct hostapd_data *hapd, char *txt)
-+{
-+ struct hostapd_config * (*config_read_cb)(const char *config_fname);
-+ struct hostapd_iface *iface = hapd->iface;
-+
-+ config_read_cb = iface->interfaces->config_read_cb;
-+ iface->interfaces->config_read_cb = hostapd_ctrl_iface_config_read;
-+ reload_opts = txt;
-+
-+ hostapd_reload_config(iface);
-+
-+ iface->interfaces->config_read_cb = config_read_cb;
-+}
-
- #ifdef CONFIG_IEEE80211W
- #ifdef NEED_AP_MLME
-@@ -864,6 +928,10 @@ static void hostapd_ctrl_iface_receive(i
- reply_len += res;
- }
- #endif /* CONFIG_NO_RADIUS */
-+ } else if (os_strcmp(buf, "DOWN") == 0) {
-+ hostapd_ctrl_iface_set_down(hapd);
-+ } else if (os_strncmp(buf, "UPDATE ", 7) == 0) {
-+ hostapd_ctrl_iface_update(hapd, buf + 7);
- } else if (os_strcmp(buf, "STA-FIRST") == 0) {
- reply_len = hostapd_ctrl_iface_sta_first(hapd, reply,
- reply_size);
diff --git a/package/hostapd/patches/453-ap_sta_support.patch b/package/hostapd/patches/453-ap_sta_support.patch
deleted file mode 100644
index 4b6c0f164..000000000
--- a/package/hostapd/patches/453-ap_sta_support.patch
+++ /dev/null
@@ -1,221 +0,0 @@
---- a/wpa_supplicant/wpa_supplicant_i.h
-+++ b/wpa_supplicant/wpa_supplicant_i.h
-@@ -95,6 +95,8 @@ struct wpa_interface {
- * receiving of EAPOL frames from an additional interface.
- */
- const char *bridge_ifname;
-+
-+ const char *hostapd_ctrl;
- };
-
- /**
-@@ -294,6 +296,8 @@ struct wpa_supplicant {
- #endif /* CONFIG_CTRL_IFACE_DBUS_NEW */
- char bridge_ifname[16];
-
-+ struct wpa_ctrl *hostapd;
-+
- char *confname;
- struct wpa_config *conf;
- int countermeasures;
---- a/wpa_supplicant/Makefile
-+++ b/wpa_supplicant/Makefile
-@@ -13,6 +13,10 @@ PKG_CONFIG ?= pkg-config
- CFLAGS += -I../src
- CFLAGS += -I../src/utils
-
-+ifdef MULTICALL
-+CFLAGS += -DMULTICALL
-+endif
-+
- -include .config
- -include $(if $(MULTICALL),../hostapd/.config)
-
-@@ -76,6 +80,10 @@ OBJS_c = wpa_cli.o ../src/common/wpa_ctr
- OBJS_c += ../src/utils/wpa_debug.o
- OBJS_c += ../src/utils/common.o
-
-+ifdef MULTICALL
-+OBJS += ../src/common/wpa_ctrl.o
-+endif
-+
- ifndef CONFIG_OS
- ifdef CONFIG_NATIVE_WINDOWS
- CONFIG_OS=win32
---- a/wpa_supplicant/wpa_supplicant.c
-+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -107,6 +107,55 @@ extern int wpa_debug_show_keys;
- extern int wpa_debug_timestamp;
- extern struct wpa_driver_ops *wpa_drivers[];
-
-+#ifdef MULTICALL
-+static int hostapd_stop(struct wpa_supplicant *wpa_s)
-+{
-+ const char *cmd = "DOWN";
-+ char buf[256];
-+ int len = sizeof(buf);
-+
-+ if (wpa_ctrl_request(wpa_s->hostapd, cmd, os_strlen(cmd), buf, &len, NULL) < 0) {
-+ wpa_printf(MSG_ERROR, "\nFailed to stop hostapd AP interfaces\n");
-+ return -1;
-+ }
-+ return 0;
-+}
-+
-+static int hostapd_reload(struct wpa_supplicant *wpa_s, struct wpa_bss *bss)
-+{
-+ char *cmd = NULL;
-+ char buf[256];
-+ int len = sizeof(buf);
-+ int channel, hw_mode;
-+ int ret;
-+
-+ if (!bss)
-+ return;
-+
-+ if (bss->freq < 4000) {
-+ hw_mode = HOSTAPD_MODE_IEEE80211G;
-+ channel = (bss->freq - 2407) / 5;
-+ } else {
-+ hw_mode = HOSTAPD_MODE_IEEE80211A;
-+ channel = (bss->freq - 5000) / 5;
-+ }
-+
-+ if (asprintf(&cmd, "UPDATE channel=%d sec_chan=0 hw_mode=%d ieee80211n=%d",
-+ channel, hw_mode, !!bss->ht_capab) < 0) {
-+ return -1;
-+ }
-+
-+ ret = wpa_ctrl_request(wpa_s->hostapd, cmd, os_strlen(cmd), buf, &len, NULL);
-+ free(cmd);
-+
-+ if (ret < 0) {
-+ wpa_printf(MSG_ERROR, "\nFailed to reload hostapd AP interfaces\n");
-+ return -1;
-+ }
-+ return 0;
-+}
-+#endif
-+
- /* Configure default/group WEP keys for static WEP */
- int wpa_set_wep_keys(struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid)
- {
-@@ -672,8 +721,16 @@ void wpa_supplicant_set_state(struct wpa
- #endif /* CONFIG_P2P */
-
- sme_sched_obss_scan(wpa_s, 1);
-+#ifdef MULTICALL
-+ if (wpa_s->hostapd)
-+ hostapd_reload(wpa_s, wpa_s->current_bss);
-+#endif
- } else if (state == WPA_DISCONNECTED || state == WPA_ASSOCIATING ||
- state == WPA_ASSOCIATED) {
-+#ifdef MULTICALL
-+ if (wpa_s->hostapd)
-+ hostapd_stop(wpa_s);
-+#endif
- wpa_s->new_connection = 1;
- wpa_drv_set_operstate(wpa_s, 0);
- #ifndef IEEE8021X_EAPOL
-@@ -2727,6 +2784,21 @@ static int wpa_supplicant_init_iface(str
- os_strlcpy(wpa_s->bridge_ifname, iface->bridge_ifname,
- sizeof(wpa_s->bridge_ifname));
- }
-+#ifdef MULTICALL
-+ if (iface->hostapd_ctrl) {
-+ char *cmd = "DOWN";
-+ char buf[256];
-+ int len = sizeof(buf);
-+
-+ wpa_s->hostapd = wpa_ctrl_open(iface->hostapd_ctrl);
-+ if (!wpa_s->hostapd) {
-+ wpa_printf(MSG_ERROR, "\nFailed to connect to hostapd\n");
-+ return -1;
-+ }
-+ if (hostapd_stop(wpa_s) < 0)
-+ return -1;
-+ }
-+#endif
-
- /* RSNA Supplicant Key Management - INITIALIZE */
- eapol_sm_notify_portEnabled(wpa_s->eapol, FALSE);
---- a/wpa_supplicant/bss.c
-+++ b/wpa_supplicant/bss.c
-@@ -11,6 +11,7 @@
- #include "utils/common.h"
- #include "utils/eloop.h"
- #include "common/ieee802_11_defs.h"
-+#include "common/ieee802_11_common.h"
- #include "drivers/driver.h"
- #include "wpa_supplicant_i.h"
- #include "config.h"
-@@ -139,6 +140,8 @@ struct wpa_bss * wpa_bss_get(struct wpa_
-
- static void wpa_bss_copy_res(struct wpa_bss *dst, struct wpa_scan_res *src)
- {
-+ struct ieee80211_ht_capabilities *capab;
-+ struct ieee802_11_elems elems;
- os_time_t usec;
-
- dst->flags = src->flags;
-@@ -151,6 +154,12 @@ static void wpa_bss_copy_res(struct wpa_
- dst->level = src->level;
- dst->tsf = src->tsf;
-
-+ memset(&elems, 0, sizeof(elems));
-+ ieee802_11_parse_elems((u8 *) (src + 1), src->ie_len, &elems, 0);
-+ capab = (struct ieee80211_ht_capabilities *) elems.ht_capabilities;
-+ if (capab)
-+ dst->ht_capab = le_to_host16(capab->ht_capabilities_info);
-+
- os_get_time(&dst->last_update);
- dst->last_update.sec -= src->age / 1000;
- usec = (src->age % 1000) * 1000;
---- a/wpa_supplicant/bss.h
-+++ b/wpa_supplicant/bss.h
-@@ -72,6 +72,7 @@ struct wpa_bss {
- u8 bssid[ETH_ALEN];
- u8 hessid[ETH_ALEN];
- u8 ssid[32];
-+ u16 ht_capab;
- size_t ssid_len;
- int freq;
- u16 beacon_int;
---- a/wpa_supplicant/main.c
-+++ b/wpa_supplicant/main.c
-@@ -25,7 +25,7 @@ static void usage(void)
- "usage:\n"
- " wpa_supplicant [-BddhKLqqstuvW] [-P<pid file>] "
- "[-g<global ctrl>] \\\n"
-- " -i<ifname> -c<config file> [-C<ctrl>] [-D<driver>] "
-+ " -i<ifname> -c<config file> [-C<ctrl>] [-D<driver>] [-H<hostapd path>]"
- "[-p<driver_param>] \\\n"
- " [-b<br_ifname>] [-f<debug file>] [-e<entropy file>] "
- "\\\n"
-@@ -67,6 +67,7 @@ static void usage(void)
- #endif /* CONFIG_DEBUG_LINUX_TRACING */
- printf(" -t = include timestamp in debug messages\n"
- " -h = show this help text\n"
-+ " -H = connect to a hostapd instance to manage state changes\n"
- " -L = show license (BSD)\n"
- " -o = override driver parameter for new interfaces\n"
- " -O = override ctrl_interface parameter for new interfaces\n"
-@@ -155,7 +156,7 @@ int main(int argc, char *argv[])
-
- for (;;) {
- c = getopt(argc, argv,
-- "b:Bc:C:D:de:f:g:hi:KLNo:O:p:P:qsTtuvW");
-+ "b:Bc:C:D:de:f:g:hH:i:KLNo:O:p:P:qsTtuvW");
- if (c < 0)
- break;
- switch (c) {
-@@ -199,6 +200,9 @@ int main(int argc, char *argv[])
- usage();
- exitcode = 0;
- goto out;
-+ case 'H':
-+ iface->hostapd_ctrl = optarg;
-+ break;
- case 'i':
- iface->ifname = optarg;
- break;
diff --git a/package/hostapd/patches/460-disable_ctrl_iface_mib.patch b/package/hostapd/patches/460-disable_ctrl_iface_mib.patch
deleted file mode 100644
index 2f03179a0..000000000
--- a/package/hostapd/patches/460-disable_ctrl_iface_mib.patch
+++ /dev/null
@@ -1,168 +0,0 @@
---- a/hostapd/Makefile
-+++ b/hostapd/Makefile
-@@ -135,6 +135,9 @@ endif
- ifdef CONFIG_NO_CTRL_IFACE
- CFLAGS += -DCONFIG_NO_CTRL_IFACE
- else
-+ifdef CONFIG_CTRL_IFACE_MIB
-+CFLAGS += -DCONFIG_CTRL_IFACE_MIB
-+endif
- OBJS += ctrl_iface.o
- OBJS += ../src/ap/ctrl_iface_ap.o
- endif
---- a/hostapd/ctrl_iface.c
-+++ b/hostapd/ctrl_iface.c
-@@ -899,6 +899,7 @@ static void hostapd_ctrl_iface_receive(i
- } else if (os_strncmp(buf, "RELOG", 5) == 0) {
- if (wpa_debug_reopen_file() < 0)
- reply_len = -1;
-+#ifdef CONFIG_CTRL_IFACE_MIB
- } else if (os_strcmp(buf, "MIB") == 0) {
- reply_len = ieee802_11_get_mib(hapd, reply, reply_size);
- if (reply_len >= 0) {
-@@ -928,10 +929,12 @@ static void hostapd_ctrl_iface_receive(i
- reply_len += res;
- }
- #endif /* CONFIG_NO_RADIUS */
-+#endif
- } else if (os_strcmp(buf, "DOWN") == 0) {
- hostapd_ctrl_iface_set_down(hapd);
- } else if (os_strncmp(buf, "UPDATE ", 7) == 0) {
- hostapd_ctrl_iface_update(hapd, buf + 7);
-+#ifdef CONFIG_CTRL_IFACE_MIB
- } else if (os_strcmp(buf, "STA-FIRST") == 0) {
- reply_len = hostapd_ctrl_iface_sta_first(hapd, reply,
- reply_size);
-@@ -941,6 +944,7 @@ static void hostapd_ctrl_iface_receive(i
- } else if (os_strncmp(buf, "STA-NEXT ", 9) == 0) {
- reply_len = hostapd_ctrl_iface_sta_next(hapd, buf + 9, reply,
- reply_size);
-+#endif
- } else if (os_strcmp(buf, "ATTACH") == 0) {
- if (hostapd_ctrl_iface_attach(hapd, &from, fromlen))
- reply_len = -1;
---- a/wpa_supplicant/Makefile
-+++ b/wpa_supplicant/Makefile
-@@ -751,6 +751,9 @@ ifdef CONFIG_IEEE80211N
- OBJS += ../src/ap/ieee802_11_ht.o
- endif
- ifdef CONFIG_CTRL_IFACE
-+ifdef CONFIG_CTRL_IFACE_MIB
-+CFLAGS += -DCONFIG_CTRL_IFACE_MIB
-+endif
- OBJS += ../src/ap/ctrl_iface_ap.o
- endif
-
---- a/wpa_supplicant/ctrl_iface.c
-+++ b/wpa_supplicant/ctrl_iface.c
-@@ -4382,6 +4382,7 @@ char * wpa_supplicant_ctrl_iface_process
- reply_len = -1;
- } else if (os_strncmp(buf, "NOTE ", 5) == 0) {
- wpa_printf(MSG_INFO, "NOTE: %s", buf + 5);
-+#ifdef CONFIG_CTRL_IFACE_MIB
- } else if (os_strcmp(buf, "MIB") == 0) {
- reply_len = wpa_sm_get_mib(wpa_s->wpa, reply, reply_size);
- if (reply_len >= 0) {
-@@ -4393,6 +4394,7 @@ char * wpa_supplicant_ctrl_iface_process
- else
- reply_len += res;
- }
-+#endif
- } else if (os_strncmp(buf, "STATUS", 6) == 0) {
- reply_len = wpa_supplicant_ctrl_iface_status(
- wpa_s, buf + 6, reply, reply_size);
-@@ -4792,6 +4794,7 @@ char * wpa_supplicant_ctrl_iface_process
- reply_len = wpa_supplicant_ctrl_iface_bss(
- wpa_s, buf + 4, reply, reply_size);
- #ifdef CONFIG_AP
-+#ifdef CONFIG_CTRL_IFACE_MIB
- } else if (os_strcmp(buf, "STA-FIRST") == 0) {
- reply_len = ap_ctrl_iface_sta_first(wpa_s, reply, reply_size);
- } else if (os_strncmp(buf, "STA ", 4) == 0) {
-@@ -4800,6 +4803,7 @@ char * wpa_supplicant_ctrl_iface_process
- } else if (os_strncmp(buf, "STA-NEXT ", 9) == 0) {
- reply_len = ap_ctrl_iface_sta_next(wpa_s, buf + 9, reply,
- reply_size);
-+#endif
- } else if (os_strncmp(buf, "DEAUTHENTICATE ", 15) == 0) {
- if (ap_ctrl_iface_sta_deauthenticate(wpa_s, buf + 15))
- reply_len = -1;
---- a/src/ap/ctrl_iface_ap.c
-+++ b/src/ap/ctrl_iface_ap.c
-@@ -20,6 +20,7 @@
- #include "ctrl_iface_ap.h"
- #include "ap_drv_ops.h"
-
-+#ifdef CONFIG_CTRL_IFACE_MIB
-
- static int hostapd_ctrl_iface_sta_mib(struct hostapd_data *hapd,
- struct sta_info *sta,
-@@ -103,6 +104,7 @@ int hostapd_ctrl_iface_sta_next(struct h
- return hostapd_ctrl_iface_sta_mib(hapd, sta->next, buf, buflen);
- }
-
-+#endif
-
- #ifdef CONFIG_P2P_MANAGER
- static int p2p_manager_disconnect(struct hostapd_data *hapd, u16 stype,
-@@ -269,3 +271,4 @@ int hostapd_ctrl_iface_disassociate(stru
-
- return 0;
- }
-+
---- a/src/ap/ieee802_1x.c
-+++ b/src/ap/ieee802_1x.c
-@@ -2034,6 +2034,7 @@ static const char * bool_txt(Boolean boo
- return bool ? "TRUE" : "FALSE";
- }
-
-+#ifdef CONFIG_CTRL_IFACE_MIB
-
- int ieee802_1x_get_mib(struct hostapd_data *hapd, char *buf, size_t buflen)
- {
-@@ -2186,6 +2187,7 @@ int ieee802_1x_get_mib_sta(struct hostap
- return len;
- }
-
-+#endif
-
- static void ieee802_1x_finished(struct hostapd_data *hapd,
- struct sta_info *sta, int success)
---- a/src/ap/wpa_auth.c
-+++ b/src/ap/wpa_auth.c
-@@ -2729,6 +2729,7 @@ static const char * wpa_bool_txt(int boo
- return bool ? "TRUE" : "FALSE";
- }
-
-+#ifdef CONFIG_CTRL_IFACE_MIB
-
- #define RSN_SUITE "%02x-%02x-%02x-%d"
- #define RSN_SUITE_ARG(s) \
-@@ -2873,7 +2874,7 @@ int wpa_get_mib_sta(struct wpa_state_mac
-
- return len;
- }
--
-+#endif
-
- void wpa_auth_countermeasures_start(struct wpa_authenticator *wpa_auth)
- {
---- a/src/rsn_supp/wpa.c
-+++ b/src/rsn_supp/wpa.c
-@@ -1844,6 +1844,8 @@ static u32 wpa_key_mgmt_suite(struct wpa
- }
-
-
-+#ifdef CONFIG_CTRL_IFACE_MIB
-+
- #define RSN_SUITE "%02x-%02x-%02x-%d"
- #define RSN_SUITE_ARG(s) \
- ((s) >> 24) & 0xff, ((s) >> 16) & 0xff, ((s) >> 8) & 0xff, (s) & 0xff
-@@ -1927,6 +1929,7 @@ int wpa_sm_get_mib(struct wpa_sm *sm, ch
-
- return (int) len;
- }
-+#endif
- #endif /* CONFIG_CTRL_IFACE */
-
-
diff --git a/package/hostapd/patches/470-wpa_ie_cap_workaround.patch b/package/hostapd/patches/470-wpa_ie_cap_workaround.patch
deleted file mode 100644
index 00a32229d..000000000
--- a/package/hostapd/patches/470-wpa_ie_cap_workaround.patch
+++ /dev/null
@@ -1,56 +0,0 @@
---- a/src/common/wpa_common.c
-+++ b/src/common/wpa_common.c
-@@ -959,6 +959,31 @@ const char * wpa_key_mgmt_txt(int key_mg
- }
-
-
-+static void wpa_fixup_wpa_ie_rsn(u8 *assoc_ie, const u8 *wpa_msg_ie,
-+ size_t rsn_ie_len)
-+{
-+ int pos, count;
-+
-+ pos = sizeof(struct rsn_ie_hdr) + RSN_SELECTOR_LEN;
-+ if (rsn_ie_len < pos + 2)
-+ return;
-+
-+ count = WPA_GET_LE16(wpa_msg_ie + pos);
-+ pos += 2 + count * RSN_SELECTOR_LEN;
-+ if (rsn_ie_len < pos + 2)
-+ return;
-+
-+ count = WPA_GET_LE16(wpa_msg_ie + pos);
-+ pos += 2 + count * RSN_SELECTOR_LEN;
-+ if (rsn_ie_len < pos + 2)
-+ return;
-+
-+ if (!assoc_ie[pos] && !assoc_ie[pos + 1] &&
-+ (wpa_msg_ie[pos] || wpa_msg_ie[pos + 1]))
-+ memcpy(&assoc_ie[pos], &wpa_msg_ie[pos], 2);
-+}
-+
-+
- int wpa_compare_rsn_ie(int ft_initial_assoc,
- const u8 *ie1, size_t ie1len,
- const u8 *ie2, size_t ie2len)
-@@ -966,8 +991,19 @@ int wpa_compare_rsn_ie(int ft_initial_as
- if (ie1 == NULL || ie2 == NULL)
- return -1;
-
-- if (ie1len == ie2len && os_memcmp(ie1, ie2, ie1len) == 0)
-- return 0; /* identical IEs */
-+ if (ie1len == ie2len) {
-+ u8 *ie_tmp;
-+
-+ if (os_memcmp(ie1, ie2, ie1len) == 0)
-+ return 0; /* identical IEs */
-+
-+ ie_tmp = alloca(ie1len);
-+ memcpy(ie_tmp, ie1, ie1len);
-+ wpa_fixup_wpa_ie_rsn(ie_tmp, ie2, ie1len);
-+
-+ if (os_memcmp(ie_tmp, ie2, ie1len) == 0)
-+ return 0; /* only mismatch in RSN capabilties */
-+ }
-
- #ifdef CONFIG_IEEE80211R
- if (ft_initial_assoc) {
diff --git a/package/hostapd/patches/480-terminate_on_setup_failure.patch b/package/hostapd/patches/480-terminate_on_setup_failure.patch
deleted file mode 100644
index 6168a5cfc..000000000
--- a/package/hostapd/patches/480-terminate_on_setup_failure.patch
+++ /dev/null
@@ -1,81 +0,0 @@
---- a/src/ap/hostapd.c
-+++ b/src/ap/hostapd.c
-@@ -886,11 +886,8 @@ int hostapd_setup_interface_complete(str
- size_t j;
- u8 *prev_addr;
-
-- if (err) {
-- wpa_printf(MSG_ERROR, "Interface initialization failed");
-- eloop_terminate();
-- return -1;
-- }
-+ if (err)
-+ goto error;
-
- wpa_printf(MSG_DEBUG, "Completing interface initialization");
- if (hapd->iconf->channel) {
-@@ -906,7 +903,7 @@ int hostapd_setup_interface_complete(str
- hapd->iconf->secondary_channel)) {
- wpa_printf(MSG_ERROR, "Could not set channel for "
- "kernel driver");
-- return -1;
-+ goto error;
- }
- }
-
-@@ -917,7 +914,7 @@ int hostapd_setup_interface_complete(str
- hostapd_logger(hapd, NULL, HOSTAPD_MODULE_IEEE80211,
- HOSTAPD_LEVEL_WARNING,
- "Failed to prepare rates table.");
-- return -1;
-+ goto error;
- }
- }
-
-@@ -925,14 +922,14 @@ int hostapd_setup_interface_complete(str
- hostapd_set_rts(hapd, hapd->iconf->rts_threshold)) {
- wpa_printf(MSG_ERROR, "Could not set RTS threshold for "
- "kernel driver");
-- return -1;
-+ goto error;
- }
-
- if (hapd->iconf->fragm_threshold > -1 &&
- hostapd_set_frag(hapd, hapd->iconf->fragm_threshold)) {
- wpa_printf(MSG_ERROR, "Could not set fragmentation threshold "
- "for kernel driver");
-- return -1;
-+ goto error;
- }
-
- prev_addr = hapd->own_addr;
-@@ -942,7 +939,7 @@ int hostapd_setup_interface_complete(str
- if (j)
- os_memcpy(hapd->own_addr, prev_addr, ETH_ALEN);
- if (hostapd_setup_bss(hapd, j == 0))
-- return -1;
-+ goto error;
- if (hostapd_mac_comp_empty(hapd->conf->bssid) == 0)
- prev_addr = hapd->own_addr;
- }
-@@ -954,7 +951,7 @@ int hostapd_setup_interface_complete(str
- if (hostapd_driver_commit(hapd) < 0) {
- wpa_printf(MSG_ERROR, "%s: Failed to commit driver "
- "configuration", __func__);
-- return -1;
-+ goto error;
- }
-
- /*
-@@ -975,6 +972,11 @@ int hostapd_setup_interface_complete(str
- iface->bss[0]->conf->iface);
-
- return 0;
-+
-+error:
-+ wpa_printf(MSG_ERROR, "Interface initialization failed");
-+ eloop_terminate();
-+ return -1;
- }
-
-
diff --git a/package/hostapd/patches/500-random_pool_add_kernel.patch b/package/hostapd/patches/500-random_pool_add_kernel.patch
deleted file mode 100644
index e54e881d8..000000000
--- a/package/hostapd/patches/500-random_pool_add_kernel.patch
+++ /dev/null
@@ -1,168 +0,0 @@
---- a/src/crypto/random.c
-+++ b/src/crypto/random.c
-@@ -33,6 +33,8 @@
- #include "sha1.h"
- #include "random.h"
-
-+#define RANDOM_STAMPFILE "/var/run/.random_available"
-+
- #define POOL_WORDS 32
- #define POOL_WORDS_MASK (POOL_WORDS - 1)
- #define POOL_TAP1 26
-@@ -43,6 +45,8 @@
- #define EXTRACT_LEN 16
- #define MIN_READY_MARK 2
-
-+#ifndef CONFIG_NO_RANDOM_POOL
-+
- static u32 pool[POOL_WORDS];
- static unsigned int input_rotate = 0;
- static unsigned int pool_pos = 0;
-@@ -123,7 +127,7 @@ static void random_extract(u8 *out)
- }
-
-
--void random_add_randomness(const void *buf, size_t len)
-+static void random_pool_add_randomness(const void *buf, size_t len)
- {
- struct os_time t;
- static unsigned int count = 0;
-@@ -213,16 +217,22 @@ int random_get_bytes(void *buf, size_t l
- int random_pool_ready(void)
- {
- #ifdef __linux__
-+ struct stat st;
- int fd;
- ssize_t res;
-
-+ if (stat(RANDOM_STAMPFILE, &st) == 0)
-+ return 1;
-+
- /*
- * Make sure that there is reasonable entropy available before allowing
- * some key derivation operations to proceed.
- */
-
-- if (dummy_key_avail == sizeof(dummy_key))
-+ if (dummy_key_avail == sizeof(dummy_key)) {
-+ random_mark_pool_ready();
- return 1; /* Already initialized - good to continue */
-+ }
-
- /*
- * Try to fetch some more data from the kernel high quality
-@@ -257,6 +267,7 @@ int random_pool_ready(void)
- if (dummy_key_avail == sizeof(dummy_key)) {
- if (own_pool_ready < MIN_READY_MARK)
- own_pool_ready = MIN_READY_MARK;
-+ random_mark_pool_ready();
- random_write_entropy();
- return 1;
- }
-@@ -269,6 +280,7 @@ int random_pool_ready(void)
- total_collected + 10 * own_pool_ready > MIN_COLLECT_ENTROPY) {
- wpa_printf(MSG_INFO, "random: Allow operation to proceed "
- "based on internal entropy");
-+ random_mark_pool_ready();
- return 1;
- }
-
-@@ -284,10 +296,16 @@ int random_pool_ready(void)
-
- void random_mark_pool_ready(void)
- {
-+ int fd;
-+
- own_pool_ready++;
- wpa_printf(MSG_DEBUG, "random: Mark internal entropy pool to be "
- "ready (count=%u/%u)", own_pool_ready, MIN_READY_MARK);
- random_write_entropy();
-+
-+ fd = open(RANDOM_STAMPFILE, O_CREAT | O_WRONLY | O_EXCL | O_NOFOLLOW, 0600);
-+ if (fd >= 0)
-+ close(fd);
- }
-
-
-@@ -444,3 +462,22 @@ void random_deinit(void)
- os_free(random_entropy_file);
- random_entropy_file = NULL;
- }
-+
-+#endif /* CONFIG_NO_RANDOM_POOL */
-+
-+
-+void random_add_randomness(const void *buf, size_t len)
-+{
-+#ifdef __linux__
-+ int fd;
-+
-+ fd = open("/dev/random", O_RDWR);
-+ if (fd >= 0) {
-+ write(fd, buf, len);
-+ close(fd);
-+ }
-+#endif
-+#ifndef CONFIG_NO_RANDOM_POOL
-+ random_pool_add_randomness(buf, len);
-+#endif
-+}
---- a/wpa_supplicant/Makefile
-+++ b/wpa_supplicant/Makefile
-@@ -1217,9 +1217,8 @@ endif
-
- ifdef CONFIG_NO_RANDOM_POOL
- CFLAGS += -DCONFIG_NO_RANDOM_POOL
--else
--OBJS += ../src/crypto/random.o
- endif
-+OBJS += ../src/crypto/random.o
-
- ifdef CONFIG_CTRL_IFACE
- ifeq ($(CONFIG_CTRL_IFACE), y)
---- a/wpa_supplicant/Android.mk
-+++ b/wpa_supplicant/Android.mk
-@@ -1161,9 +1161,8 @@ endif
-
- ifdef CONFIG_NO_RANDOM_POOL
- L_CFLAGS += -DCONFIG_NO_RANDOM_POOL
--else
--OBJS += src/crypto/random.c
- endif
-+OBJS += src/crypto/random.c
-
- ifdef CONFIG_CTRL_IFACE
- ifeq ($(CONFIG_CTRL_IFACE), y)
---- a/hostapd/Android.mk
-+++ b/hostapd/Android.mk
-@@ -748,11 +748,11 @@ endif
- ifdef CONFIG_NO_RANDOM_POOL
- L_CFLAGS += -DCONFIG_NO_RANDOM_POOL
- else
--OBJS += src/crypto/random.c
--HOBJS += src/crypto/random.c
- HOBJS += $(SHA1OBJS)
- HOBJS += src/crypto/md5.c
- endif
-+OBJS += src/crypto/random.c
-+HOBJS += src/crypto/random.c
-
- ifdef CONFIG_RADIUS_SERVER
- L_CFLAGS += -DRADIUS_SERVER
---- a/hostapd/Makefile
-+++ b/hostapd/Makefile
-@@ -755,12 +755,12 @@ endif
- ifdef CONFIG_NO_RANDOM_POOL
- CFLAGS += -DCONFIG_NO_RANDOM_POOL
- else
--OBJS += ../src/crypto/random.o
--HOBJS += ../src/crypto/random.o
- HOBJS += ../src/utils/eloop.o
- HOBJS += $(SHA1OBJS)
- HOBJS += ../src/crypto/md5.o
- endif
-+OBJS += ../src/crypto/random.o
-+HOBJS += ../src/crypto/random.o
-
- ifdef CONFIG_RADIUS_SERVER
- CFLAGS += -DRADIUS_SERVER
diff --git a/package/hostapd/patches/510-bring_down_interface.patch b/package/hostapd/patches/510-bring_down_interface.patch
deleted file mode 100644
index 7481eb152..000000000
--- a/package/hostapd/patches/510-bring_down_interface.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/src/drivers/driver_nl80211.c
-+++ b/src/drivers/driver_nl80211.c
-@@ -7144,8 +7144,6 @@ static int wpa_driver_nl80211_set_mode(s
- ret = nl80211_set_mode(drv, drv->ifindex, nlmode);
- if (ret == -EACCES)
- break;
-- res = linux_set_iface_flags(drv->global->ioctl_sock,
-- bss->ifname, 1);
- if (res && !ret)
- ret = -1;
- else if (ret != -EBUSY)
-@@ -7161,6 +7159,7 @@ static int wpa_driver_nl80211_set_mode(s
- "interface is down");
- drv->nlmode = nlmode;
- drv->ignore_if_down_event = 1;
-+ linux_set_iface_flags(drv->global->ioctl_sock, bss->ifname, 1);
- }
-
- done:
diff --git a/package/hostapd/patches/520-fix_wps_pin_crash.patch b/package/hostapd/patches/520-fix_wps_pin_crash.patch
deleted file mode 100644
index 29d154cef..000000000
--- a/package/hostapd/patches/520-fix_wps_pin_crash.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/hostapd/ctrl_iface.c
-+++ b/hostapd/ctrl_iface.c
-@@ -450,6 +450,9 @@ static int hostapd_ctrl_iface_wps_ap_pin
- char *pos;
- const char *pin_txt;
-
-+ if (!hapd->wps)
-+ return -1;
-+
- pos = os_strchr(txt, ' ');
- if (pos)
- *pos++ = '\0';
diff --git a/package/hostapd/patches/530-wps_single_auth_enc_type.patch b/package/hostapd/patches/530-wps_single_auth_enc_type.patch
deleted file mode 100644
index f05ea35cf..000000000
--- a/package/hostapd/patches/530-wps_single_auth_enc_type.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/src/ap/wps_hostapd.c
-+++ b/src/ap/wps_hostapd.c
-@@ -873,11 +873,9 @@ int hostapd_init_wps(struct hostapd_data
-
- if (conf->rsn_pairwise & WPA_CIPHER_CCMP)
- wps->encr_types |= WPS_ENCR_AES;
-- if (conf->rsn_pairwise & WPA_CIPHER_TKIP)
-+ else if (conf->rsn_pairwise & WPA_CIPHER_TKIP)
- wps->encr_types |= WPS_ENCR_TKIP;
-- }
--
-- if (conf->wpa & WPA_PROTO_WPA) {
-+ } else if (conf->wpa & WPA_PROTO_WPA) {
- if (conf->wpa_key_mgmt & WPA_KEY_MGMT_PSK)
- wps->auth_types |= WPS_AUTH_WPAPSK;
- if (conf->wpa_key_mgmt & WPA_KEY_MGMT_IEEE8021X)
-@@ -885,7 +883,7 @@ int hostapd_init_wps(struct hostapd_data
-
- if (conf->wpa_pairwise & WPA_CIPHER_CCMP)
- wps->encr_types |= WPS_ENCR_AES;
-- if (conf->wpa_pairwise & WPA_CIPHER_TKIP)
-+ else if (conf->wpa_pairwise & WPA_CIPHER_TKIP)
- wps->encr_types |= WPS_ENCR_TKIP;
- }
-
diff --git a/package/hostapd/patches/540-dynamic_20_40_mhz.patch b/package/hostapd/patches/540-dynamic_20_40_mhz.patch
deleted file mode 100644
index d58358c08..000000000
--- a/package/hostapd/patches/540-dynamic_20_40_mhz.patch
+++ /dev/null
@@ -1,202 +0,0 @@
---- a/hostapd/config_file.c
-+++ b/hostapd/config_file.c
-@@ -2495,6 +2495,10 @@ static int hostapd_config_fill(struct ho
- "ht_capab", line);
- errors++;
- }
-+ } else if (os_strcmp(buf, "dynamic_ht40") == 0) {
-+ conf->dynamic_ht40 = atoi(pos);
-+ if (conf->dynamic_ht40 == 1)
-+ conf->dynamic_ht40 = 1500;
- } else if (os_strcmp(buf, "require_ht") == 0) {
- conf->require_ht = atoi(pos);
- #endif /* CONFIG_IEEE80211N */
---- a/src/ap/ap_config.h
-+++ b/src/ap/ap_config.h
-@@ -501,6 +501,7 @@ struct hostapd_config {
- int ieee80211n;
- int secondary_channel;
- int require_ht;
-+ int dynamic_ht40;
- u32 vht_capab;
- int ieee80211ac;
- int require_vht;
---- a/src/ap/hostapd.c
-+++ b/src/ap/hostapd.c
-@@ -22,6 +22,7 @@
- #include "beacon.h"
- #include "iapp.h"
- #include "ieee802_1x.h"
-+#include "ieee802_11.h"
- #include "ieee802_11_auth.h"
- #include "vlan_init.h"
- #include "wpa_auth.h"
-@@ -323,6 +324,7 @@ static void hostapd_cleanup_iface_pre(st
-
- static void hostapd_cleanup_iface_partial(struct hostapd_iface *iface)
- {
-+ hostapd_deinit_ht(iface);
- hostapd_free_hw_features(iface->hw_features, iface->num_hw_features);
- iface->hw_features = NULL;
- os_free(iface->current_rates);
---- a/src/ap/hostapd.h
-+++ b/src/ap/hostapd.h
-@@ -251,6 +251,9 @@ struct hostapd_iface {
- /* Overlapping BSS information */
- int olbc_ht;
-
-+ int force_20mhz;
-+ struct os_time last_20mhz_trigger;
-+
- u16 ht_op_mode;
- void (*scan_cb)(struct hostapd_iface *iface);
- };
---- a/src/ap/ieee802_11.c
-+++ b/src/ap/ieee802_11.c
-@@ -1220,6 +1220,9 @@ static void handle_beacon(struct hostapd
- sizeof(mgmt->u.beacon)), &elems,
- 0);
-
-+ if (!elems.ht_capabilities)
-+ hostapd_trigger_20mhz(hapd->iface);
-+
- ap_list_process_beacon(hapd->iface, mgmt, &elems, fi);
- }
-
---- a/src/ap/ieee802_11.h
-+++ b/src/ap/ieee802_11.h
-@@ -78,4 +78,17 @@ int hostapd_update_time_adv(struct hosta
- void hostapd_client_poll_ok(struct hostapd_data *hapd, const u8 *addr);
- u8 * hostapd_eid_bss_max_idle_period(struct hostapd_data *hapd, u8 *eid);
-
-+#ifdef CONFIG_IEEE80211N
-+void hostapd_trigger_20mhz(struct hostapd_iface *iface);
-+void hostapd_deinit_ht(struct hostapd_iface *iface);
-+
-+#else
-+static inline void hostapd_deinit_ht(struct hostapd_iface *iface)
-+{
-+}
-+static inline void hostapd_trigger_20mhz(struct hostapd_iface *iface)
-+{
-+}
-+#endif /* CONFIG_IEEE80211N */
-+
- #endif /* IEEE802_11_H */
---- a/src/ap/ieee802_11_ht.c
-+++ b/src/ap/ieee802_11_ht.c
-@@ -20,9 +20,11 @@
- #include "drivers/driver.h"
- #include "hostapd.h"
- #include "ap_config.h"
-+#include "ap_drv_ops.h"
- #include "sta_info.h"
- #include "beacon.h"
- #include "ieee802_11.h"
-+#include "utils/eloop.h"
-
-
- u8 * hostapd_eid_ht_capabilities(struct hostapd_data *hapd, u8 *eid)
-@@ -70,12 +72,15 @@ u8 * hostapd_eid_ht_operation(struct hos
-
- oper->control_chan = hapd->iconf->channel;
- oper->operation_mode = host_to_le16(hapd->iface->ht_op_mode);
-- if (hapd->iconf->secondary_channel == 1)
-- oper->ht_param |= HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE |
-- HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH;
-- if (hapd->iconf->secondary_channel == -1)
-- oper->ht_param |= HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW |
-- HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH;
-+
-+ if (!hapd->iface->force_20mhz) {
-+ if (hapd->iconf->secondary_channel == 1)
-+ oper->ht_param |= HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE |
-+ HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH;
-+ if (hapd->iconf->secondary_channel == -1)
-+ oper->ht_param |= HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW |
-+ HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH;
-+ }
-
- pos += sizeof(*oper);
-
-@@ -271,3 +276,80 @@ void hostapd_get_ht_capab(struct hostapd
-
- neg_ht_cap->ht_capabilities_info = host_to_le16(cap);
- }
-+
-+static void hostapd_set_force_20mhz(struct hostapd_iface *iface);
-+
-+static void hostapd_restore_40mhz(void *eloop_data, void *user_ctx)
-+{
-+ struct hostapd_iface *iface = eloop_data;
-+ struct os_time time;
-+ int timeout;
-+
-+ if (!iface->last_20mhz_trigger.sec)
-+ return;
-+
-+ os_get_time(&time);
-+ timeout = iface->last_20mhz_trigger.sec + iface->conf->dynamic_ht40 -
-+ time.sec;
-+
-+ if (timeout > 0) {
-+ eloop_register_timeout(timeout, 0, hostapd_restore_40mhz,
-+ iface, NULL);
-+ return;
-+ }
-+
-+ iface->last_20mhz_trigger.sec = 0;
-+ iface->last_20mhz_trigger.usec = 0;
-+
-+ iface->force_20mhz = 0;
-+ hostapd_set_force_20mhz(iface);
-+}
-+
-+static void hostapd_set_force_20mhz(struct hostapd_iface *iface)
-+{
-+ int secondary_channel;
-+ int i;
-+
-+ ieee802_11_set_beacons(iface);
-+
-+ for (i = 0; i < iface->num_bss; i++) {
-+ struct hostapd_data *hapd = iface->bss[i];
-+
-+ if (iface->force_20mhz)
-+ secondary_channel = 0;
-+ else
-+ secondary_channel = hapd->iconf->secondary_channel;
-+
-+ if (hostapd_set_freq(hapd, hapd->iconf->hw_mode, iface->freq,
-+ hapd->iconf->channel,
-+ hapd->iconf->ieee80211n,
-+ secondary_channel)) {
-+ wpa_printf(MSG_ERROR, "Could not set channel for "
-+ "kernel driver");
-+ }
-+ }
-+}
-+
-+void hostapd_deinit_ht(struct hostapd_iface *iface)
-+{
-+ eloop_cancel_timeout(hostapd_restore_40mhz, iface, NULL);
-+}
-+
-+void hostapd_trigger_20mhz(struct hostapd_iface *iface)
-+{
-+ if (!iface->conf->dynamic_ht40)
-+ return;
-+
-+ if (!iface->force_20mhz) {
-+ iface->force_20mhz = 1;
-+ hostapd_set_force_20mhz(iface);
-+ }
-+
-+ if (!iface->last_20mhz_trigger.sec) {
-+ eloop_cancel_timeout(hostapd_restore_40mhz, iface, NULL);
-+ eloop_register_timeout(iface->conf->dynamic_ht40, 0,
-+ hostapd_restore_40mhz, iface, NULL);
-+ }
-+
-+ os_get_time(&iface->last_20mhz_trigger);
-+}
diff --git a/package/hostapd/patches/550-limit_debug_messages.patch b/package/hostapd/patches/550-limit_debug_messages.patch
deleted file mode 100644
index 659e98011..000000000
--- a/package/hostapd/patches/550-limit_debug_messages.patch
+++ /dev/null
@@ -1,213 +0,0 @@
---- a/src/utils/wpa_debug.c
-+++ b/src/utils/wpa_debug.c
-@@ -201,7 +201,7 @@ void wpa_debug_close_linux_tracing(void)
- *
- * Note: New line '\n' is added to the end of the text when printing to stdout.
- */
--void wpa_printf(int level, const char *fmt, ...)
-+void _wpa_printf(int level, const char *fmt, ...)
- {
- va_list ap;
-
-@@ -248,8 +248,8 @@ void wpa_printf(int level, const char *f
- }
-
-
--static void _wpa_hexdump(int level, const char *title, const u8 *buf,
-- size_t len, int show)
-+void _wpa_hexdump(int level, const char *title, const u8 *buf,
-+ size_t len, int show)
- {
- size_t i;
-
-@@ -375,20 +375,9 @@ static void _wpa_hexdump(int level, cons
- #endif /* CONFIG_ANDROID_LOG */
- }
-
--void wpa_hexdump(int level, const char *title, const u8 *buf, size_t len)
--{
-- _wpa_hexdump(level, title, buf, len, 1);
--}
--
--
--void wpa_hexdump_key(int level, const char *title, const u8 *buf, size_t len)
--{
-- _wpa_hexdump(level, title, buf, len, wpa_debug_show_keys);
--}
-
--
--static void _wpa_hexdump_ascii(int level, const char *title, const u8 *buf,
-- size_t len, int show)
-+void _wpa_hexdump_ascii(int level, const char *title, const u8 *buf,
-+ size_t len, int show)
- {
- size_t i, llen;
- const u8 *pos = buf;
-@@ -495,19 +484,6 @@ static void _wpa_hexdump_ascii(int level
- }
-
-
--void wpa_hexdump_ascii(int level, const char *title, const u8 *buf, size_t len)
--{
-- _wpa_hexdump_ascii(level, title, buf, len, 1);
--}
--
--
--void wpa_hexdump_ascii_key(int level, const char *title, const u8 *buf,
-- size_t len)
--{
-- _wpa_hexdump_ascii(level, title, buf, len, wpa_debug_show_keys);
--}
--
--
- #ifdef CONFIG_DEBUG_FILE
- static char *last_path = NULL;
- #endif /* CONFIG_DEBUG_FILE */
-@@ -591,7 +567,7 @@ void wpa_msg_register_ifname_cb(wpa_msg_
- }
-
-
--void wpa_msg(void *ctx, int level, const char *fmt, ...)
-+void _wpa_msg(void *ctx, int level, const char *fmt, ...)
- {
- va_list ap;
- char *buf;
-@@ -625,7 +601,7 @@ void wpa_msg(void *ctx, int level, const
- }
-
-
--void wpa_msg_ctrl(void *ctx, int level, const char *fmt, ...)
-+void _wpa_msg_ctrl(void *ctx, int level, const char *fmt, ...)
- {
- va_list ap;
- char *buf;
---- a/src/utils/wpa_debug.h
-+++ b/src/utils/wpa_debug.h
-@@ -43,6 +43,17 @@ int wpa_debug_open_file(const char *path
- int wpa_debug_reopen_file(void);
- void wpa_debug_close_file(void);
-
-+/* internal */
-+void _wpa_hexdump(int level, const char *title, const u8 *buf,
-+ size_t len, int show);
-+void _wpa_hexdump_ascii(int level, const char *title, const u8 *buf,
-+ size_t len, int show);
-+extern int wpa_debug_show_keys;
-+
-+#ifndef CONFIG_MSG_MIN_PRIORITY
-+#define CONFIG_MSG_MIN_PRIORITY 0
-+#endif
-+
- /**
- * wpa_debug_printf_timestamp - Print timestamp for debug output
- *
-@@ -63,9 +74,15 @@ void wpa_debug_print_timestamp(void);
- *
- * Note: New line '\n' is added to the end of the text when printing to stdout.
- */
--void wpa_printf(int level, const char *fmt, ...)
-+void _wpa_printf(int level, const char *fmt, ...)
- PRINTF_FORMAT(2, 3);
-
-+#define wpa_printf(level, ...) \
-+ do { \
-+ if (level >= CONFIG_MSG_MIN_PRIORITY) \
-+ _wpa_printf(level, __VA_ARGS__); \
-+ } while(0)
-+
- /**
- * wpa_hexdump - conditional hex dump
- * @level: priority level (MSG_*) of the message
-@@ -77,7 +94,13 @@ PRINTF_FORMAT(2, 3);
- * output may be directed to stdout, stderr, and/or syslog based on
- * configuration. The contents of buf is printed out has hex dump.
- */
--void wpa_hexdump(int level, const char *title, const u8 *buf, size_t len);
-+static inline void wpa_hexdump(int level, const char *title, const u8 *buf, size_t len)
-+{
-+ if (level < CONFIG_MSG_MIN_PRIORITY)
-+ return;
-+
-+ _wpa_hexdump(level, title, buf, len, 1);
-+}
-
- static inline void wpa_hexdump_buf(int level, const char *title,
- const struct wpabuf *buf)
-@@ -99,7 +122,13 @@ static inline void wpa_hexdump_buf(int l
- * like wpa_hexdump(), but by default, does not include secret keys (passwords,
- * etc.) in debug output.
- */
--void wpa_hexdump_key(int level, const char *title, const u8 *buf, size_t len);
-+static inline void wpa_hexdump_key(int level, const char *title, const u8 *buf, size_t len)
-+{
-+ if (level < CONFIG_MSG_MIN_PRIORITY)
-+ return;
-+
-+ _wpa_hexdump(level, title, buf, len, wpa_debug_show_keys);
-+}
-
- static inline void wpa_hexdump_buf_key(int level, const char *title,
- const struct wpabuf *buf)
-@@ -121,8 +150,14 @@ static inline void wpa_hexdump_buf_key(i
- * the hex numbers and ASCII characters (for printable range) are shown. 16
- * bytes per line will be shown.
- */
--void wpa_hexdump_ascii(int level, const char *title, const u8 *buf,
-- size_t len);
-+static inline void wpa_hexdump_ascii(int level, const char *title,
-+ const u8 *buf, size_t len)
-+{
-+ if (level < CONFIG_MSG_MIN_PRIORITY)
-+ return;
-+
-+ _wpa_hexdump_ascii(level, title, buf, len, 1);
-+}
-
- /**
- * wpa_hexdump_ascii_key - conditional hex dump, hide keys
-@@ -138,8 +173,14 @@ void wpa_hexdump_ascii(int level, const
- * bytes per line will be shown. This works like wpa_hexdump_ascii(), but by
- * default, does not include secret keys (passwords, etc.) in debug output.
- */
--void wpa_hexdump_ascii_key(int level, const char *title, const u8 *buf,
-- size_t len);
-+static inline void wpa_hexdump_ascii_key(int level, const char *title,
-+ const u8 *buf, size_t len)
-+{
-+ if (level < CONFIG_MSG_MIN_PRIORITY)
-+ return;
-+
-+ _wpa_hexdump_ascii(level, title, buf, len, wpa_debug_show_keys);
-+}
-
- /*
- * wpa_dbg() behaves like wpa_msg(), but it can be removed from build to reduce
-@@ -172,7 +213,12 @@ void wpa_hexdump_ascii_key(int level, co
- *
- * Note: New line '\n' is added to the end of the text when printing to stdout.
- */
--void wpa_msg(void *ctx, int level, const char *fmt, ...) PRINTF_FORMAT(3, 4);
-+void _wpa_msg(void *ctx, int level, const char *fmt, ...) PRINTF_FORMAT(3, 4);
-+#define wpa_msg(ctx, level, ...) \
-+ do { \
-+ if (level >= CONFIG_MSG_MIN_PRIORITY) \
-+ _wpa_msg(ctx, level, __VA_ARGS__); \
-+ } while(0)
-
- /**
- * wpa_msg_ctrl - Conditional printf for ctrl_iface monitors
-@@ -186,8 +232,13 @@ void wpa_msg(void *ctx, int level, const
- * attached ctrl_iface monitors. In other words, it can be used for frequent
- * events that do not need to be sent to syslog.
- */
--void wpa_msg_ctrl(void *ctx, int level, const char *fmt, ...)
-+void _wpa_msg_ctrl(void *ctx, int level, const char *fmt, ...)
- PRINTF_FORMAT(3, 4);
-+#define wpa_msg_ctrl(ctx, level, ...) \
-+ do { \
-+ if (level >= CONFIG_MSG_MIN_PRIORITY) \
-+ _wpa_msg_ctrl(ctx, level, __VA_ARGS__); \
-+ } while(0)
-
- typedef void (*wpa_msg_cb_func)(void *ctx, int level, const char *txt,
- size_t len);
diff --git a/package/hostapd/patches/560-indicate-features.patch b/package/hostapd/patches/560-indicate-features.patch
deleted file mode 100644
index d01e18b86..000000000
--- a/package/hostapd/patches/560-indicate-features.patch
+++ /dev/null
@@ -1,82 +0,0 @@
---- a/hostapd/main.c
-+++ b/hostapd/main.c
-@@ -13,6 +13,7 @@
-
- #include "utils/common.h"
- #include "utils/eloop.h"
-+#include "utils/build_features.h"
- #include "crypto/random.h"
- #include "crypto/tls.h"
- #include "common/version.h"
-@@ -560,7 +561,7 @@ int main(int argc, char *argv[])
-
- wpa_supplicant_event = hostapd_wpa_event;
- for (;;) {
-- c = getopt(argc, argv, "Bde:f:hKP:tvg:");
-+ c = getopt(argc, argv, "Bde:f:hKP:tg:v::");
- if (c < 0)
- break;
- switch (c) {
-@@ -592,6 +593,8 @@ int main(int argc, char *argv[])
- wpa_debug_timestamp++;
- break;
- case 'v':
-+ if (optarg)
-+ exit(!has_feature(optarg));
- show_version();
- exit(1);
- break;
---- a/wpa_supplicant/main.c
-+++ b/wpa_supplicant/main.c
-@@ -12,6 +12,7 @@
- #endif /* __linux__ */
-
- #include "common.h"
-+#include "build_features.h"
- #include "wpa_supplicant_i.h"
- #include "driver_i.h"
-
-@@ -156,7 +157,7 @@ int main(int argc, char *argv[])
-
- for (;;) {
- c = getopt(argc, argv,
-- "b:Bc:C:D:de:f:g:hH:i:KLNo:O:p:P:qsTtuvW");
-+ "b:Bc:C:D:de:f:g:hH:i:KLNo:O:p:P:qsTtuv::W");
- if (c < 0)
- break;
- switch (c) {
-@@ -248,8 +249,12 @@ int main(int argc, char *argv[])
- break;
- #endif /* CONFIG_DBUS */
- case 'v':
-- printf("%s\n", wpa_supplicant_version);
-- exitcode = 0;
-+ if (optarg) {
-+ exitcode = !has_feature(optarg);
-+ } else {
-+ printf("%s\n", wpa_supplicant_version);
-+ exitcode = 0;
-+ }
- goto out;
- case 'W':
- params.wait_for_monitor++;
---- /dev/null
-+++ b/src/utils/build_features.h
-@@ -0,0 +1,17 @@
-+#ifndef BUILD_FEATURES_H
-+#define BUILD_FEATURES_H
-+
-+static inline int has_feature(const char *feat)
-+{
-+#ifdef IEEE8021X_EAPOL
-+ if (!strcmp(feat, "eap"))
-+ return 1;
-+#endif
-+#ifdef IEEE80211N
-+ if (!strcmp(feat, "11n"))
-+ return 1;
-+#endif
-+ return 0;
-+}
-+
-+#endif /* BUILD_FEATURES_H */
diff --git a/package/hostapd/patches/570-genl_connect_debug.patch b/package/hostapd/patches/570-genl_connect_debug.patch
deleted file mode 100644
index 5f140489b..000000000
--- a/package/hostapd/patches/570-genl_connect_debug.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/src/drivers/driver_nl80211.c
-+++ b/src/drivers/driver_nl80211.c
-@@ -127,7 +127,7 @@ static struct nl_handle * nl_create_hand
- }
-
- if (genl_connect(handle)) {
-- wpa_printf(MSG_ERROR, "nl80211: Failed to connect to generic "
-+ wpa_printf(MSG_DEBUG, "nl80211: Failed to connect to generic "
- "netlink (%s)", dbg);
- nl80211_handle_destroy(handle);
- return NULL;
diff --git a/package/hostapd/patches/580-fix_bss_addr.patch b/package/hostapd/patches/580-fix_bss_addr.patch
deleted file mode 100644
index 3a76668c1..000000000
--- a/package/hostapd/patches/580-fix_bss_addr.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/src/drivers/driver_nl80211.c
-+++ b/src/drivers/driver_nl80211.c
-@@ -7738,7 +7738,7 @@ static int i802_set_wds_sta(void *priv,
- if (!if_nametoindex(name)) {
- if (nl80211_create_iface(drv, name,
- NL80211_IFTYPE_AP_VLAN,
-- NULL, 1) < 0)
-+ bss->addr, 1) < 0)
- return -1;
- if (bridge_ifname &&
- linux_br_add_if(drv->global->ioctl_sock,
diff --git a/package/hostapd/patches/590-hostapd_cli_ifdef.patch b/package/hostapd/patches/590-hostapd_cli_ifdef.patch
deleted file mode 100644
index 705cef13d..000000000
--- a/package/hostapd/patches/590-hostapd_cli_ifdef.patch
+++ /dev/null
@@ -1,50 +0,0 @@
---- a/hostapd/hostapd_cli.c
-+++ b/hostapd/hostapd_cli.c
-@@ -67,7 +67,6 @@ static const char *commands_help =
- #ifdef CONFIG_IEEE80211W
- " sa_query <addr> send SA Query to a station\n"
- #endif /* CONFIG_IEEE80211W */
--#ifdef CONFIG_WPS
- " wps_pin <uuid> <pin> [timeout] [addr] add WPS Enrollee PIN\n"
- " wps_check_pin <PIN> verify PIN checksum\n"
- " wps_pbc indicate button pushed to initiate PBC\n"
-@@ -82,7 +81,6 @@ static const char *commands_help =
- #endif /* CONFIG_WPS_NFC */
- " wps_ap_pin <cmd> [params..] enable/disable AP PIN\n"
- " wps_config <SSID> <auth> <encr> <key> configure AP\n"
--#endif /* CONFIG_WPS */
- " get_config show current configuration\n"
- " help show this usage help\n"
- " interface [ifname] show interfaces/select interface\n"
-@@ -343,7 +341,6 @@ static int hostapd_cli_cmd_sa_query(stru
- #endif /* CONFIG_IEEE80211W */
-
-
--#ifdef CONFIG_WPS
- static int hostapd_cli_cmd_wps_pin(struct wpa_ctrl *ctrl, int argc,
- char *argv[])
- {
-@@ -573,7 +570,6 @@ static int hostapd_cli_cmd_wps_config(st
- ssid_hex, argv[1]);
- return wpa_ctrl_command(ctrl, buf);
- }
--#endif /* CONFIG_WPS */
-
-
- static int hostapd_cli_cmd_ess_disassoc(struct wpa_ctrl *ctrl, int argc,
-@@ -799,7 +795,6 @@ static struct hostapd_cli_cmd hostapd_cl
- #ifdef CONFIG_IEEE80211W
- { "sa_query", hostapd_cli_cmd_sa_query },
- #endif /* CONFIG_IEEE80211W */
--#ifdef CONFIG_WPS
- { "wps_pin", hostapd_cli_cmd_wps_pin },
- { "wps_check_pin", hostapd_cli_cmd_wps_check_pin },
- { "wps_pbc", hostapd_cli_cmd_wps_pbc },
-@@ -814,7 +809,6 @@ static struct hostapd_cli_cmd hostapd_cl
- #endif /* CONFIG_WPS_NFC */
- { "wps_ap_pin", hostapd_cli_cmd_wps_ap_pin },
- { "wps_config", hostapd_cli_cmd_wps_config },
--#endif /* CONFIG_WPS */
- { "ess_disassoc", hostapd_cli_cmd_ess_disassoc },
- { "get_config", hostapd_cli_cmd_get_config },
- { "help", hostapd_cli_cmd_help },
diff --git a/package/hostapd/patches/601-wpa_supplicant-add-new-config-params-to-be-used-with.patch b/package/hostapd/patches/601-wpa_supplicant-add-new-config-params-to-be-used-with.patch
deleted file mode 100644
index ac0d247d7..000000000
--- a/package/hostapd/patches/601-wpa_supplicant-add-new-config-params-to-be-used-with.patch
+++ /dev/null
@@ -1,211 +0,0 @@
-From 4bb69d15477e0f2b00e166845341dc933de47c58 Mon Sep 17 00:00:00 2001
-From: Antonio Quartulli <ordex@autistici.org>
-Date: Sun, 3 Jun 2012 18:22:56 +0200
-Subject: [PATCHv2 601/602] wpa_supplicant: add new config params to be used
- with the ibss join command
-
-Signed-hostap: Antonio Quartulli <ordex@autistici.org>
----
- src/drivers/driver.h | 6 +++
- wpa_supplicant/config.c | 96 +++++++++++++++++++++++++++++++++++++++
- wpa_supplicant/config_ssid.h | 6 +++
- wpa_supplicant/wpa_supplicant.c | 23 +++++++---
- 4 files changed, 124 insertions(+), 7 deletions(-)
-
---- a/src/drivers/driver.h
-+++ b/src/drivers/driver.h
-@@ -19,6 +19,7 @@
-
- #define WPA_SUPPLICANT_DRIVER_VERSION 4
-
-+#include "drivers/nl80211_copy.h"
- #include "common/defs.h"
-
- #define HOSTAPD_CHAN_DISABLED 0x00000001
-@@ -351,6 +352,11 @@ struct wpa_driver_associate_params {
- */
- int freq;
-
-+ int beacon_interval;
-+ int fixed_freq;
-+ unsigned char rates[NL80211_MAX_SUPP_RATES];
-+ int mcast_rate;
-+
- /**
- * bg_scan_period - Background scan period in seconds, 0 to disable
- * background scan, or -1 to indicate no change to default driver
---- a/wpa_supplicant/config.c
-+++ b/wpa_supplicant/config.c
-@@ -14,6 +14,7 @@
- #include "rsn_supp/wpa.h"
- #include "eap_peer/eap.h"
- #include "p2p/p2p.h"
-+#include "drivers/nl80211_copy.h"
- #include "config.h"
-
-
-@@ -1463,6 +1464,97 @@ static char * wpa_config_write_p2p_clien
-
- #endif /* CONFIG_P2P */
-
-+static int wpa_config_parse_mcast_rate(const struct parse_data *data,
-+ struct wpa_ssid *ssid, int line,
-+ const char *value)
-+{
-+ ssid->mcast_rate = (int)(strtod(value, NULL) * 10);
-+
-+ return 0;
-+}
-+
-+#ifndef NO_CONFIG_WRITE
-+static char * wpa_config_write_mcast_rate(const struct parse_data *data,
-+ struct wpa_ssid *ssid)
-+{
-+ char *value;
-+ int res;
-+
-+ if (!ssid->mcast_rate == 0)
-+ return NULL;
-+
-+ value = os_malloc(6); /* longest: 300.0 */
-+ if (value == NULL)
-+ return NULL;
-+ res = os_snprintf(value, 5, "%.1f", (double)ssid->mcast_rate / 10);
-+ if (res < 0) {
-+ os_free(value);
-+ return NULL;
-+ }
-+ return value;
-+}
-+#endif /* NO_CONFIG_WRITE */
-+
-+static int wpa_config_parse_rates(const struct parse_data *data,
-+ struct wpa_ssid *ssid, int line,
-+ const char *value)
-+{
-+ int i;
-+ char *pos, *r, *sptr, *end;
-+ double rate;
-+
-+ pos = (char *)value;
-+ r = strtok_r(pos, ",", &sptr);
-+ i = 0;
-+ while (pos && i < NL80211_MAX_SUPP_RATES) {
-+ rate = 0.0;
-+ if (r)
-+ rate = strtod(r, &end);
-+ ssid->rates[i] = rate * 2;
-+ if (*end != '\0' || rate * 2 != ssid->rates[i])
-+ return 1;
-+
-+ i++;
-+ r = strtok_r(NULL, ",", &sptr);
-+ }
-+
-+ return 0;
-+}
-+
-+#ifndef NO_CONFIG_WRITE
-+static char * wpa_config_write_rates(const struct parse_data *data,
-+ struct wpa_ssid *ssid)
-+{
-+ char *value, *pos;
-+ int res, i;
-+
-+ if (ssid->rates[0] <= 0)
-+ return NULL;
-+
-+ value = os_malloc(6 * NL80211_MAX_SUPP_RATES + 1);
-+ if (value == NULL)
-+ return NULL;
-+ pos = value;
-+ for (i = 0; i < NL80211_MAX_SUPP_RATES - 1; i++) {
-+ res = os_snprintf(pos, 6, "%.1f,", (double)ssid->rates[i] / 2);
-+ if (res < 0) {
-+ os_free(value);
-+ return NULL;
-+ }
-+ pos += res;
-+ }
-+ res = os_snprintf(pos, 6, "%.1f",
-+ (double)ssid->rates[NL80211_MAX_SUPP_RATES - 1] / 2);
-+ if (res < 0) {
-+ os_free(value);
-+ return NULL;
-+ }
-+
-+ value[6 * NL80211_MAX_SUPP_RATES] = '\0';
-+ return value;
-+}
-+#endif /* NO_CONFIG_WRITE */
-+
- /* Helper macros for network block parser */
-
- #ifdef OFFSET
-@@ -1638,6 +1730,10 @@ static const struct parse_data ssid_fiel
- #endif /* CONFIG_HT_OVERRIDES */
- { INT(ap_max_inactivity) },
- { INT(dtim_period) },
-+ { INT_RANGE(fixed_freq, 0, 1) },
-+ { INT_RANGE(beacon_interval, 0, 1000) },
-+ { FUNC(rates) },
-+ { FUNC(mcast_rate) },
- };
-
- #undef OFFSET
---- a/wpa_supplicant/config_ssid.h
-+++ b/wpa_supplicant/config_ssid.h
-@@ -11,6 +11,7 @@
-
- #include "common/defs.h"
- #include "eap_peer/eap_config.h"
-+#include "drivers/nl80211_copy.h"
-
- #define MAX_SSID_LEN 32
-
-@@ -529,6 +530,11 @@ struct wpa_ssid {
- * disabled_until - Network block disabled until this time if non-zero
- */
- struct os_time disabled_until;
-+
-+ int fixed_freq;
-+ int beacon_interval;
-+ unsigned char rates[NL80211_MAX_SUPP_RATES];
-+ double mcast_rate;
- };
-
- #endif /* CONFIG_SSID_H */
---- a/wpa_supplicant/wpa_supplicant.c
-+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -1561,15 +1561,24 @@ void wpa_supplicant_associate(struct wpa
- params.ssid_len = ssid->ssid_len;
- }
-
-- if (ssid->mode == WPAS_MODE_IBSS && ssid->bssid_set &&
-- wpa_s->conf->ap_scan == 2) {
-- params.bssid = ssid->bssid;
-- params.fixed_bssid = 1;
-+ if (ssid->mode == WPAS_MODE_IBSS) {
-+ if (ssid->bssid_set && wpa_s->conf->ap_scan == 2) {
-+ params.bssid = ssid->bssid;
-+ params.fixed_bssid = 1;
-+ }
-+ if (ssid->frequency > 0 && params.freq == 0)
-+ /* Initial channel for IBSS */
-+ params.freq = ssid->frequency;
-+ params.fixed_freq = ssid->fixed_freq;
-+ params.beacon_interval = ssid->beacon_interval;
-+ i = 0;
-+ while (i < NL80211_MAX_SUPP_RATES) {
-+ params.rates[i] = ssid->rates[i];
-+ i++;
-+ }
-+ params.mcast_rate = ssid->mcast_rate;
- }
-
-- if (ssid->mode == WPAS_MODE_IBSS && ssid->frequency > 0 &&
-- params.freq == 0)
-- params.freq = ssid->frequency; /* Initial channel for IBSS */
- params.wpa_ie = wpa_ie;
- params.wpa_ie_len = wpa_ie_len;
- params.pairwise_suite = cipher_pairwise;
diff --git a/package/hostapd/patches/602-driver_nl80211-use-new-parameters-during-ibss-join.patch b/package/hostapd/patches/602-driver_nl80211-use-new-parameters-during-ibss-join.patch
deleted file mode 100644
index c426a0bb2..000000000
--- a/package/hostapd/patches/602-driver_nl80211-use-new-parameters-during-ibss-join.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From ffc4445958a3ed4064f2e1bf73fa478a61c5cf7b Mon Sep 17 00:00:00 2001
-From: Antonio Quartulli <ordex@autistici.org>
-Date: Sun, 3 Jun 2012 18:42:25 +0200
-Subject: [PATCHv2 602/602] driver_nl80211: use new parameters during ibss join
-
-Signed-hostap: Antonio Quartulli <ordex@autistici.org>
----
- src/drivers/driver_nl80211.c | 33 ++++++++++++++++++++++++++++++++-
- 1 file changed, 32 insertions(+), 1 deletion(-)
-
---- a/src/drivers/driver_nl80211.c
-+++ b/src/drivers/driver_nl80211.c
-@@ -6587,7 +6587,7 @@ static int wpa_driver_nl80211_ibss(struc
- struct wpa_driver_associate_params *params)
- {
- struct nl_msg *msg;
-- int ret = -1;
-+ int ret = -1, i;
- int count = 0;
-
- wpa_printf(MSG_DEBUG, "nl80211: Join IBSS (ifindex=%d)", drv->ifindex);
-@@ -6620,6 +6620,37 @@ retry:
- wpa_printf(MSG_DEBUG, " * freq=%d", params->freq);
- NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_FREQ, params->freq);
-
-+ if (params->fixed_freq) {
-+ wpa_printf(MSG_DEBUG, " * fixed_freq");
-+ NLA_PUT_FLAG(msg, NL80211_ATTR_FREQ_FIXED);
-+ }
-+
-+ if (params->beacon_interval > 0) {
-+ wpa_printf(MSG_DEBUG, " * beacon_interval=%d",
-+ params->beacon_interval);
-+ NLA_PUT_U32(msg, NL80211_ATTR_BEACON_INTERVAL,
-+ params->beacon_interval);
-+ }
-+
-+ if (params->rates[0] > 0) {
-+ wpa_printf(MSG_DEBUG, " * basic_rates:");
-+ i = 0;
-+ while (i < NL80211_MAX_SUPP_RATES &&
-+ params->rates[i] > 0) {
-+ wpa_printf(MSG_DEBUG, " %.1f",
-+ (double)params->rates[i] / 2);
-+ i++;
-+ }
-+ NLA_PUT(msg, NL80211_ATTR_BSS_BASIC_RATES, i,
-+ params->rates);
-+ }
-+
-+ if (params->mcast_rate > 0) {
-+ wpa_printf(MSG_DEBUG, " * mcast_rates=%.1f",
-+ (double)params->mcast_rate / 10);
-+ NLA_PUT_U32(msg, NL80211_ATTR_MCAST_RATE, params->mcast_rate);
-+ }
-+
- ret = nl80211_set_conn_keys(params, msg);
- if (ret)
- goto nla_put_failure;
diff --git a/package/hostapd/patches/604-wpa_s-support-htmode-param.patch b/package/hostapd/patches/604-wpa_s-support-htmode-param.patch
deleted file mode 100644
index 44931f2f3..000000000
--- a/package/hostapd/patches/604-wpa_s-support-htmode-param.patch
+++ /dev/null
@@ -1,156 +0,0 @@
-From b9329c5dfeed7d5c55d2117d8dfe326fc40c8fb1 Mon Sep 17 00:00:00 2001
-From: Antonio Quartulli <ordex@autistici.org>
-Date: Tue, 3 Jul 2012 00:36:24 +0200
-Subject: [PATCH] wpa_s: support htmode param
-
-possible values are HT20, HT40-, HT40+ and NOHT
-
-Signed-off-by: Antonio Quartulli <ordex@autistici.org>
----
- src/drivers/driver.h | 2 ++
- src/drivers/driver_nl80211.c | 16 ++++++++++
- wpa_supplicant/config.c | 66 +++++++++++++++++++++++++++++++++++++++
- wpa_supplicant/config_ssid.h | 2 ++
- wpa_supplicant/wpa_supplicant.c | 2 ++
- 5 files changed, 88 insertions(+)
-
---- a/src/drivers/driver.h
-+++ b/src/drivers/driver.h
-@@ -356,6 +356,8 @@ struct wpa_driver_associate_params {
- int fixed_freq;
- unsigned char rates[NL80211_MAX_SUPP_RATES];
- int mcast_rate;
-+ int ht_set;
-+ unsigned int htmode;
-
- /**
- * bg_scan_period - Background scan period in seconds, 0 to disable
---- a/src/drivers/driver_nl80211.c
-+++ b/src/drivers/driver_nl80211.c
-@@ -6651,6 +6651,22 @@ retry:
- NLA_PUT_U32(msg, NL80211_ATTR_MCAST_RATE, params->mcast_rate);
- }
-
-+ if (params->ht_set) {
-+ switch(params->htmode) {
-+ case NL80211_CHAN_HT20:
-+ wpa_printf(MSG_DEBUG, " * ht=HT20");
-+ break;
-+ case NL80211_CHAN_HT40PLUS:
-+ wpa_printf(MSG_DEBUG, " * ht=HT40+");
-+ break;
-+ case NL80211_CHAN_HT40MINUS:
-+ wpa_printf(MSG_DEBUG, " * ht=HT40-");
-+ break;
-+ }
-+ NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_CHANNEL_TYPE,
-+ params->htmode);
-+ }
-+
- ret = nl80211_set_conn_keys(params, msg);
- if (ret)
- goto nla_put_failure;
---- a/wpa_supplicant/config.c
-+++ b/wpa_supplicant/config.c
-@@ -1495,6 +1495,71 @@ static char * wpa_config_write_mcast_rat
- }
- #endif /* NO_CONFIG_WRITE */
-
-+static int wpa_config_parse_htmode(const struct parse_data *data,
-+ struct wpa_ssid *ssid, int line,
-+ const char *value)
-+{
-+ int i;
-+ static const struct {
-+ const char *name;
-+ unsigned int val;
-+ } htmap[] = {
-+ { .name = "HT20", .val = NL80211_CHAN_HT20, },
-+ { .name = "HT40+", .val = NL80211_CHAN_HT40PLUS, },
-+ { .name = "HT40-", .val = NL80211_CHAN_HT40MINUS, },
-+ { .name = "NOHT", .val = NL80211_CHAN_NO_HT, },
-+ };
-+ ssid->ht_set = 0;;
-+ for (i = 0; i < 4; i++) {
-+ if (strcasecmp(htmap[i].name, value) == 0) {
-+ ssid->htmode = htmap[i].val;
-+ ssid->ht_set = 1;
-+ break;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+#ifndef NO_CONFIG_WRITE
-+static char * wpa_config_write_htmode(const struct parse_data *data,
-+ struct wpa_ssid *ssid)
-+{
-+ char *value;
-+ int res;
-+
-+ value = os_malloc(6); /* longest: HT40+ */
-+ if (value == NULL)
-+ return NULL;
-+
-+ switch(ssid->htmode) {
-+ case NL80211_CHAN_HT20:
-+ res = os_snprintf(value, 4, "HT20");
-+ break;
-+ case NL80211_CHAN_HT40PLUS:
-+ res = os_snprintf(value, 5, "HT40+");
-+ break;
-+ case NL80211_CHAN_HT40MINUS:
-+ res = os_snprintf(value, 5, "HT40-");
-+ break;
-+ case NL80211_CHAN_NO_HT:
-+ res = os_snprintf(value, 4, "NOHT");
-+ break;
-+ default:
-+ os_free(value);
-+ return NULL;
-+ }
-+
-+ if (res < 0) {
-+ os_free(value);
-+ return NULL;
-+ }
-+
-+ return value;
-+}
-+#endif /* NO_CONFIG_WRITE */
-+
-+
- static int wpa_config_parse_rates(const struct parse_data *data,
- struct wpa_ssid *ssid, int line,
- const char *value)
-@@ -1734,6 +1799,7 @@ static const struct parse_data ssid_fiel
- { INT_RANGE(beacon_interval, 0, 1000) },
- { FUNC(rates) },
- { FUNC(mcast_rate) },
-+ { FUNC(htmode) },
- };
-
- #undef OFFSET
---- a/wpa_supplicant/config_ssid.h
-+++ b/wpa_supplicant/config_ssid.h
-@@ -535,6 +535,8 @@ struct wpa_ssid {
- int beacon_interval;
- unsigned char rates[NL80211_MAX_SUPP_RATES];
- double mcast_rate;
-+ int ht_set;
-+ unsigned int htmode;
- };
-
- #endif /* CONFIG_SSID_H */
---- a/wpa_supplicant/wpa_supplicant.c
-+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -1577,6 +1577,8 @@ void wpa_supplicant_associate(struct wpa
- i++;
- }
- params.mcast_rate = ssid->mcast_rate;
-+ params.ht_set = ssid->ht_set;
-+ params.htmode = ssid->htmode;
- }
-
- params.wpa_ie = wpa_ie;
diff --git a/package/hostapd/patches/610-max_num_sta_probe.patch b/package/hostapd/patches/610-max_num_sta_probe.patch
deleted file mode 100644
index e22348c89..000000000
--- a/package/hostapd/patches/610-max_num_sta_probe.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/src/ap/beacon.c
-+++ b/src/ap/beacon.c
-@@ -413,6 +413,10 @@ void handle_probe_req(struct hostapd_dat
- return;
- }
-
-+ if (!sta && hapd->num_sta >= hapd->conf->max_num_sta)
-+ wpa_printf(MSG_MSGDUMP, "Probe Request from " MACSTR " ignored,"
-+ " too many connected stations.", MAC2STR(mgmt->sa));
-+
- #ifdef CONFIG_INTERWORKING
- if (elems.interworking && elems.interworking_len >= 1) {
- u8 ant = elems.interworking[0] & 0x0f;