diff options
Diffstat (limited to 'package/hostapd-rtk/files')
| -rw-r--r-- | package/hostapd-rtk/files/hostapd.config | 147 | ||||
| -rw-r--r-- | package/hostapd-rtk/files/hostapd.sh | 278 | ||||
| -rw-r--r-- | package/hostapd-rtk/files/wpa_supplicant.config | 147 | ||||
| -rw-r--r-- | package/hostapd-rtk/files/wpa_supplicant.sh | 149 |
4 files changed, 721 insertions, 0 deletions
diff --git a/package/hostapd-rtk/files/hostapd.config b/package/hostapd-rtk/files/hostapd.config new file mode 100644 index 000000000..1d3d46dd0 --- /dev/null +++ b/package/hostapd-rtk/files/hostapd.config @@ -0,0 +1,147 @@ +# Example hostapd build time configuration +# +# This file lists the configuration options that are used when building the +# hostapd binary. All lines starting with # are ignored. Configuration option +# lines must be commented out complete, if they are not to be included, i.e., +# just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS and LIBS can also +# be modified from here. In most cass, these lines should use += in order not +# to override previous values of the variables. + +# Driver interface for Host AP driver +#CONFIG_DRIVER_HOSTAP=y + +# Driver interface for wired authenticator +#CONFIG_DRIVER_WIRED=y + +# Driver interface for madwifi driver +#CONFIG_DRIVER_MADWIFI=y +#CFLAGS += -I../../madwifi # change to the madwifi source directory + +# Driver interface for realtek driver +CONFIG_DRIVER_REALTEK=y + +# Driver interface for Prism54 driver +#CONFIG_DRIVER_PRISM54=y + +# Driver interface for drivers using the nl80211 kernel interface +#CONFIG_DRIVER_NL80211=y +# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be +# shipped with your distribution yet. If that is the case, you need to build +# newer libnl version and point the hostapd build to use it. +#LIBNL=/usr/src/libnl +#CFLAGS += -I$(LIBNL)/include +#LIBS += -L$(LIBNL)/lib + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib + +# Driver interface for no driver (e.g., RADIUS server only) +#CONFIG_DRIVER_NONE=y + +# IEEE 802.11F/IAPP +CONFIG_IAPP=y + +# WPA2/IEEE 802.11i RSN pre-authentication +CONFIG_RSN_PREAUTH=y + +# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) +CONFIG_PEERKEY=y + +# IEEE 802.11w (management frame protection) +# This version is an experimental implementation based on IEEE 802.11w/D1.0 +# draft and is subject to change since the standard has not yet been finalized. +# Driver support is also needed for IEEE 802.11w. +#CONFIG_IEEE80211W=y + +# Integrated EAP server +CONFIG_EAP=y + +# EAP-MD5 for the integrated EAP server +CONFIG_EAP_MD5=y + +# EAP-TLS for the integrated EAP server +CONFIG_EAP_TLS=y + +# EAP-MSCHAPv2 for the integrated EAP server +CONFIG_EAP_MSCHAPV2=y + +# EAP-PEAP for the integrated EAP server +CONFIG_EAP_PEAP=y + +# EAP-GTC for the integrated EAP server +CONFIG_EAP_GTC=y + +# EAP-TTLS for the integrated EAP server +CONFIG_EAP_TTLS=y + +# EAP-SIM for the integrated EAP server +#CONFIG_EAP_SIM=y + +# EAP-AKA for the integrated EAP server +#CONFIG_EAP_AKA=y + +# EAP-AKA' for the integrated EAP server +# This requires CONFIG_EAP_AKA to be enabled, too. +#CONFIG_EAP_AKA_PRIME=y + +# EAP-PAX for the integrated EAP server +#CONFIG_EAP_PAX=y + +# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK) +#CONFIG_EAP_PSK=y + +# EAP-SAKE for the integrated EAP server +#CONFIG_EAP_SAKE=y + +# EAP-GPSK for the integrated EAP server +#CONFIG_EAP_GPSK=y +# Include support for optional SHA256 cipher suite in EAP-GPSK +#CONFIG_EAP_GPSK_SHA256=y + +# EAP-FAST for the integrated EAP server +# Note: Default OpenSSL package does not include support for all the +# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, +# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch) +# to add the needed functions. +#CONFIG_EAP_FAST=y + +# Wi-Fi Protected Setup (WPS) +CONFIG_WPS=y +# Enable UPnP support for external WPS Registrars +CONFIG_WPS_UPNP=y + +# EAP-IKEv2 +#CONFIG_EAP_IKEV2=y + +# Trusted Network Connect (EAP-TNC) +#CONFIG_EAP_TNC=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +CONFIG_PKCS12=y + +# RADIUS authentication server. This provides access to the integrated EAP +# server from external hosts using RADIUS. +#CONFIG_RADIUS_SERVER=y + +# Build IPv6 support for RADIUS operations +CONFIG_IPV6=y + +# IEEE Std 802.11r-2008 (Fast BSS Transition) +#CONFIG_IEEE80211R=y + +# Use the hostapd's IEEE 802.11 authentication (ACL), but without +# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211) +#CONFIG_DRIVER_RADIUS_ACL=y + +# IEEE 802.11n (High Throughput) support +CONFIG_IEEE80211N=y + +# Remove debugging code that is printing out debug messages to stdout. +# This can be used to reduce the size of the hostapd considerably if debugging +# code is not needed. +#CONFIG_NO_STDOUT_DEBUG=y diff --git a/package/hostapd-rtk/files/hostapd.sh b/package/hostapd-rtk/files/hostapd.sh new file mode 100644 index 000000000..067e890c9 --- /dev/null +++ b/package/hostapd-rtk/files/hostapd.sh @@ -0,0 +1,278 @@ +hostapd_set_bss_options() { + local var="$1" + local vif="$2" + local enc wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wps_possible + + config_get enc "$vif" encryption + config_get wep_rekey "$vif" wep_rekey # 300 + config_get wpa_group_rekey "$vif" wpa_group_rekey # 300 + config_get wpa_pair_rekey "$vif" wpa_pair_rekey # 300 + config_get wpa_master_rekey "$vif" wpa_master_rekey # 640 + config_get_bool ap_isolate "$vif" isolate 0 + + config_get device "$vif" device + config_get hwmode "$device" hwmode + config_get phy "$device" phy + + config_get supported_rates "$device" supported_rates + [ -n $supported_rates ] && supported_rates="10 20 55 110 60 90 120 180 240 360 480 540" + append "$var" "supported_rates=$supported_rates" "$N" + + config_get basic_rates "$device" basic_rates + [ -n $basic_rates ] && basic_rates="10 20" + append "$var" "basic_rates=$supported_rates" "$N" + + config_get max_num_sta "$device" max_num_sta + [ -n $max_num_sta ] && max_num_sta="31" + append "$var" "max_num_sta=$max_num_sta" "$N" + + append "$var" "ctrl_interface=/var/run/hostapd-$phy" "$N" + append "$var" "ctrl_interface=/var/run/hostapd-$phy" "$N" + + append "$var" "ctrl_interface=/var/run/hostapd-$phy" "$N" + + if [ "$ap_isolate" -gt 0 ]; then + append "$var" "ap_isolate=$ap_isolate" "$N" + fi + + # Examples: + # psk-mixed/tkip => WPA1+2 PSK, TKIP + # wpa-psk2/tkip+aes => WPA2 PSK, CCMP+TKIP + # wpa2/tkip+aes => WPA2 RADIUS, CCMP+TKIP + # ... + + # TODO: move this parsing function somewhere generic, so that + # later it can be reused by drivers that don't use hostapd + + # crypto defaults: WPA2 vs WPA1 + case "$enc" in + wpa2*|*psk2*) + wpa=2 + crypto="CCMP" + ;; + *mixed*) + wpa=3 + crypto="CCMP TKIP" + ;; + *) + wpa=1 + crypto="TKIP" + ;; + esac + + # explicit override for crypto setting + case "$enc" in + *tkip+aes|*tkip+ccmp|*aes+tkip|*ccmp+tkip) crypto="CCMP TKIP";; + *aes|*ccmp) crypto="CCMP";; + *tkip) crypto="TKIP";; + esac + + # enforce CCMP for 11ng and 11na + case "$hwmode:$crypto" in + *ng:TKIP|*na:TKIP) crypto="CCMP TKIP";; + esac + + # use crypto/auth settings for building the hostapd config + case "$enc" in + *psk*) + config_get psk "$vif" key + if [ ${#psk} -eq 64 ]; then + append "$var" "wpa_psk=$psk" "$N" + else + append "$var" "wpa_passphrase=$psk" "$N" + fi + wps_possible=1 + [ -n "$wpa_group_rekey" ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N" + [ -n "$wpa_pair_rekey" ] && append "$var" "wpa_ptk_rekey=$wpa_pair_rekey" "$N" + [ -n "$wpa_master_rekey" ] && append "$var" "wpa_gmk_rekey=$wpa_master_rekey" "$N" + ;; + *wpa*) + # required fields? formats? + # hostapd is particular, maybe a default configuration for failures + config_get auth_server "$vif" auth_server + [ -z "$auth_server" ] && config_get auth_server "$vif" server + append "$var" "auth_server_addr=$auth_server" "$N" + config_get auth_port "$vif" auth_port + [ -z "$auth_port" ] && config_get auth_port "$vif" port + auth_port=${auth_port:-1812} + append "$var" "auth_server_port=$auth_port" "$N" + config_get auth_secret "$vif" auth_secret + [ -z "$auth_secret" ] && config_get auth_secret "$vif" key + append "$var" "auth_server_shared_secret=$auth_secret" "$N" + config_get acct_server "$vif" acct_server + [ -n "$acct_server" ] && append "$var" "acct_server_addr=$acct_server" "$N" + config_get acct_port "$vif" acct_port + [ -n "$acct_port" ] && acct_port=${acct_port:-1813} + [ -n "$acct_port" ] && append "$var" "acct_server_port=$acct_port" "$N" + config_get acct_secret "$vif" acct_secret + [ -n "$acct_secret" ] && append "$var" "acct_server_shared_secret=$acct_secret" "$N" + config_get nasid "$vif" nasid + append "$var" "nas_identifier=$nasid" "$N" + append "$var" "eapol_key_index_workaround=1" "$N" + append "$var" "ieee8021x=1" "$N" + append "$var" "wpa_key_mgmt=WPA-EAP" "$N" + [ -n "$wpa_group_rekey" ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N" + [ -n "$wpa_pair_rekey" ] && append "$var" "wpa_ptk_rekey=$wpa_pair_rekey" "$N" + [ -n "$wpa_master_rekey" ] && append "$var" "wpa_gmk_rekey=$wpa_master_rekey" "$N" + ;; + *wep*) + config_get key "$vif" key + key="${key:-1}" + case "$key" in + [1234]) + for idx in 1 2 3 4; do + local zidx + zidx=$(($idx - 1)) + config_get ckey "$vif" "key${idx}" + [ -n "$ckey" ] && \ + append "$var" "wep_key${zidx}=$(prepare_key_wep "$ckey")" "$N" + done + append "$var" "wep_default_key=$((key - 1))" "$N" + ;; + *) + append "$var" "wep_key0=$(prepare_key_wep "$key")" "$N" + append "$var" "wep_default_key=0" "$N" + [ -n "$wep_rekey" ] && append "$var" "wep_rekey_period=$wep_rekey" "$N" + ;; + esac + case "$enc" in + *shared*) + auth_algs=2 + ;; + *mixed*) + auth_algs=3 + ;; + esac + wpa=0 + crypto= + ;; + *) + wpa=0 + crypto= + ;; + esac + append "$var" "auth_algs=${auth_algs:-1}" "$N" + append "$var" "wpa=$wpa" "$N" + [ -n "$crypto" ] && append "$var" "wpa_pairwise=$crypto" "$N" + [ -n "$wpa_group_rekey" ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N" + + config_get ssid "$vif" ssid + config_get bridge "$vif" bridge + config_get ieee80211d "$vif" ieee80211d + config_get iapp_interface "$vif" iapp_interface + + config_get_bool wps_pbc "$vif" wps_pushbutton 0 + config_get_bool wps_label "$vif" wps_label 0 + + config_get config_methods "$vif" wps_config + [ "$wps_pbc" -gt 0 ] && append config_methods push_button + + [ -n "$wps_possible" -a -n "$config_methods" ] && { + config_get device_type "$vif" wps_device_type "6-0050F204-1" + config_get device_name "$vif" wps_device_name "OpenWrt AP" + config_get manufacturer "$vif" wps_manufacturer "openwrt.org" + + append "$var" "eap_server=1" "$N" + append "$var" "wps_state=2" "$N" + append "$var" "ap_setup_locked=1" "$N" + append "$var" "device_type=$device_type" "$N" + append "$var" "device_name=$device_name" "$N" + append "$var" "manufacturer=$manufacturer" "$N" + append "$var" "config_methods=$config_methods" "$N" + } + + append "$var" "ssid=$ssid" "$N" + [ -n "$bridge" ] && append "$var" "bridge=$bridge" "$N" + [ -n "$ieee80211d" ] && append "$var" "ieee80211d=$ieee80211d" "$N" + [ -n "$iapp_interface" ] && append "$var" iapp_interface=$(uci_get_state network "$iapp_interface" ifname "$iapp_interface") "$N" + + if [ "$wpa" -ge "2" ] + then + # RSN -> allow preauthentication + config_get rsn_preauth "$vif" rsn_preauth + if [ -n "$bridge" -a "$rsn_preauth" = 1 ] + then + append "$var" "rsn_preauth=1" "$N" + append "$var" "rsn_preauth_interfaces=$bridge" "$N" + fi + + # RSN -> allow management frame protection + config_get ieee80211w "$vif" ieee80211w + case "$ieee80211w" in + [012]) + append "$var" "ieee80211w=$ieee80211w" "$N" + [ "$ieee80211w" -gt "0" ] && { + config_get ieee80211w_max_timeout "$vif" ieee80211w_max_timeout + config_get ieee80211w_retry_timeout "$vif" ieee80211w_retry_timeout + [ -n "$ieee80211w_max_timeout" ] && \ + append "$var" "assoc_sa_query_max_timeout=$ieee80211w_max_timeout" "$N" + [ -n "$ieee80211w_retry_timeout" ] && \ + append "$var" "assoc_sa_query_retry_timeout=$ieee80211w_retry_timeout" "$N" + } + ;; + esac + fi +} + +hostapd_set_log_options() { + local var="$1" + local cfg="$2" + local log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme + + config_get log_level "$cfg" log_level 2 + + config_get_bool log_80211 "$cfg" log_80211 1 + config_get_bool log_8021x "$cfg" log_8021x 1 + config_get_bool log_radius "$cfg" log_radius 1 + config_get_bool log_wpa "$cfg" log_wpa 1 + config_get_bool log_driver "$cfg" log_driver 1 + config_get_bool log_iapp "$cfg" log_iapp 1 + config_get_bool log_mlme "$cfg" log_mlme 1 + + local log_mask=$(( \ + ($log_80211 << 0) | \ + ($log_8021x << 1) | \ + ($log_radius << 2) | \ + ($log_wpa << 3) | \ + ($log_driver << 4) | \ + ($log_iapp << 5) | \ + ($log_mlme << 6) \ + )) + + append "$var" "logger_syslog=$log_mask" "$N" + append "$var" "logger_syslog_level=$log_level" "$N" + append "$var" "logger_stdout=$log_mask" "$N" + append "$var" "logger_stdout_level=$log_level" "$N" +} + +hostapd_setup_vif() { + local vif="$1" + local driver="$2" + local ifname device channel hwmode + + hostapd_cfg= + + config_get ifname "$vif" ifname + config_get device "$vif" device + config_get channel "$device" channel + config_get hwmode "$device" hwmode + + hostapd_set_log_options hostapd_cfg "$device" + hostapd_set_bss_options hostapd_cfg "$vif" + + case "$hwmode" in + *bg|*gdt|*gst|*fh) hwmode=g;; + *adt|*ast) hwmode=a;; + esac + [ "$channel" = auto ] && channel= + [ -n "$channel" -a -z "$hwmode" ] && wifi_fixup_hwmode "$device" + cat > /var/run/hostapd-$ifname.conf <<EOF +driver=$driver +interface=$ifname +${hwmode:+hw_mode=${hwmode#11}} +${channel:+channel=$channel} +$hostapd_cfg +EOF + hostapd -P /var/run/wifi-$ifname.pid -B /var/run/hostapd-$ifname.conf +} + diff --git a/package/hostapd-rtk/files/wpa_supplicant.config b/package/hostapd-rtk/files/wpa_supplicant.config new file mode 100644 index 000000000..1d3d46dd0 --- /dev/null +++ b/package/hostapd-rtk/files/wpa_supplicant.config @@ -0,0 +1,147 @@ +# Example hostapd build time configuration +# +# This file lists the configuration options that are used when building the +# hostapd binary. All lines starting with # are ignored. Configuration option +# lines must be commented out complete, if they are not to be included, i.e., +# just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS and LIBS can also +# be modified from here. In most cass, these lines should use += in order not +# to override previous values of the variables. + +# Driver interface for Host AP driver +#CONFIG_DRIVER_HOSTAP=y + +# Driver interface for wired authenticator +#CONFIG_DRIVER_WIRED=y + +# Driver interface for madwifi driver +#CONFIG_DRIVER_MADWIFI=y +#CFLAGS += -I../../madwifi # change to the madwifi source directory + +# Driver interface for realtek driver +CONFIG_DRIVER_REALTEK=y + +# Driver interface for Prism54 driver +#CONFIG_DRIVER_PRISM54=y + +# Driver interface for drivers using the nl80211 kernel interface +#CONFIG_DRIVER_NL80211=y +# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be +# shipped with your distribution yet. If that is the case, you need to build +# newer libnl version and point the hostapd build to use it. +#LIBNL=/usr/src/libnl +#CFLAGS += -I$(LIBNL)/include +#LIBS += -L$(LIBNL)/lib + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib + +# Driver interface for no driver (e.g., RADIUS server only) +#CONFIG_DRIVER_NONE=y + +# IEEE 802.11F/IAPP +CONFIG_IAPP=y + +# WPA2/IEEE 802.11i RSN pre-authentication +CONFIG_RSN_PREAUTH=y + +# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) +CONFIG_PEERKEY=y + +# IEEE 802.11w (management frame protection) +# This version is an experimental implementation based on IEEE 802.11w/D1.0 +# draft and is subject to change since the standard has not yet been finalized. +# Driver support is also needed for IEEE 802.11w. +#CONFIG_IEEE80211W=y + +# Integrated EAP server +CONFIG_EAP=y + +# EAP-MD5 for the integrated EAP server +CONFIG_EAP_MD5=y + +# EAP-TLS for the integrated EAP server +CONFIG_EAP_TLS=y + +# EAP-MSCHAPv2 for the integrated EAP server +CONFIG_EAP_MSCHAPV2=y + +# EAP-PEAP for the integrated EAP server +CONFIG_EAP_PEAP=y + +# EAP-GTC for the integrated EAP server +CONFIG_EAP_GTC=y + +# EAP-TTLS for the integrated EAP server +CONFIG_EAP_TTLS=y + +# EAP-SIM for the integrated EAP server +#CONFIG_EAP_SIM=y + +# EAP-AKA for the integrated EAP server +#CONFIG_EAP_AKA=y + +# EAP-AKA' for the integrated EAP server +# This requires CONFIG_EAP_AKA to be enabled, too. +#CONFIG_EAP_AKA_PRIME=y + +# EAP-PAX for the integrated EAP server +#CONFIG_EAP_PAX=y + +# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK) +#CONFIG_EAP_PSK=y + +# EAP-SAKE for the integrated EAP server +#CONFIG_EAP_SAKE=y + +# EAP-GPSK for the integrated EAP server +#CONFIG_EAP_GPSK=y +# Include support for optional SHA256 cipher suite in EAP-GPSK +#CONFIG_EAP_GPSK_SHA256=y + +# EAP-FAST for the integrated EAP server +# Note: Default OpenSSL package does not include support for all the +# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, +# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch) +# to add the needed functions. +#CONFIG_EAP_FAST=y + +# Wi-Fi Protected Setup (WPS) +CONFIG_WPS=y +# Enable UPnP support for external WPS Registrars +CONFIG_WPS_UPNP=y + +# EAP-IKEv2 +#CONFIG_EAP_IKEV2=y + +# Trusted Network Connect (EAP-TNC) +#CONFIG_EAP_TNC=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +CONFIG_PKCS12=y + +# RADIUS authentication server. This provides access to the integrated EAP +# server from external hosts using RADIUS. +#CONFIG_RADIUS_SERVER=y + +# Build IPv6 support for RADIUS operations +CONFIG_IPV6=y + +# IEEE Std 802.11r-2008 (Fast BSS Transition) +#CONFIG_IEEE80211R=y + +# Use the hostapd's IEEE 802.11 authentication (ACL), but without +# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211) +#CONFIG_DRIVER_RADIUS_ACL=y + +# IEEE 802.11n (High Throughput) support +CONFIG_IEEE80211N=y + +# Remove debugging code that is printing out debug messages to stdout. +# This can be used to reduce the size of the hostapd considerably if debugging +# code is not needed. +#CONFIG_NO_STDOUT_DEBUG=y diff --git a/package/hostapd-rtk/files/wpa_supplicant.sh b/package/hostapd-rtk/files/wpa_supplicant.sh new file mode 100644 index 000000000..1ab6c663e --- /dev/null +++ b/package/hostapd-rtk/files/wpa_supplicant.sh @@ -0,0 +1,149 @@ +wpa_supplicant_setup_vif() { + local vif="$1" + local driver="$2" + local key="$key" + local options="$3" + + # wpa_supplicant should use wext for mac80211 cards + [ "$driver" = "mac80211" ] && driver='wext' + + # make sure we have the encryption type and the psk + [ -n "$enc" ] || { + config_get enc "$vif" encryption + } + [ -n "$key" ] || { + config_get key "$vif" key + } + + local net_cfg bridge + config_get bridge "$vif" bridge + [ -z "$bridge" ] && { + net_cfg="$(find_net_config "$vif")" + [ -z "$net_cfg" ] || bridge="$(bridge_interface "$net_cfg")" + config_set "$vif" bridge "$bridge" + } + + local mode ifname wds + config_get mode "$vif" mode + config_get ifname "$vif" ifname + config_get_bool wds "$vif" wds 0 + [ -z "$bridge" ] || [ "$mode" = ap ] || [ "$mode" = sta -a $wds -eq 1 ] || { + echo "wpa_supplicant_setup_vif($ifname): Refusing to bridge $mode mode interface" + return 1 + } + + case "$enc" in + *none*) + key_mgmt='NONE' + ;; + *wep*) + key_mgmt='NONE' + config_get key "$vif" key + key="${key:-1}" + case "$key" in + [1234]) + for idx in 1 2 3 4; do + local zidx + zidx=$(($idx - 1)) + config_get ckey "$vif" "key${idx}" + [ -n "$ckey" ] && \ + append "wep_key${zidx}" "wep_key${zidx}=$(prepare_key_wep "$ckey")" + done + wep_tx_keyidx="wep_tx_keyidx=$((key - 1))" + ;; + *) + wep_key0="wep_key0=$(prepare_key_wep "$key")" + wep_tx_keyidx="wep_tx_keyidx=0" + ;; + esac + ;; + *psk*) + key_mgmt='WPA-PSK' + config_get_bool usepassphrase "$vif" passphrase 1 + if [ "$usepassphrase" = "1" ]; then + passphrase="psk=\"${key}\"" + else + passphrase="psk=${key}" + fi + case "$enc" in + *psk2*) + proto='proto=RSN' + config_get ieee80211w "$vif" ieee80211w + ;; + *psk*) + proto='proto=WPA' + ;; + esac + ;; + *wpa*|*8021x*) + proto='proto=WPA2' + key_mgmt='WPA-EAP' + config_get ieee80211w "$vif" ieee80211w + config_get ca_cert "$vif" ca_cert + config_get eap_type "$vif" eap_type + ca_cert=${ca_cert:+"ca_cert=\"$ca_cert\""} + case "$eap_type" in + tls) + pairwise='pairwise=CCMP' + group='group=CCMP' + config_get identity "$vif" identity + config_get priv_key "$vif" priv_key + config_get priv_key_pwd "$vif" priv_key_pwd + identity="identity=\"$identity\"" + priv_key="private_key=\"$priv_key\"" + priv_key_pwd="private_key_passwd=\"$priv_key_pwd\"" + ;; + peap|ttls) + config_get auth "$vif" auth + config_get identity "$vif" identity + config_get password "$vif" password + phase2="phase2=\"auth=${auth:-MSCHAPV2}\"" + identity="identity=\"$identity\"" + password="password=\"$password\"" + ;; + esac + eap_type="eap=$(echo $eap_type | tr 'a-z' 'A-Z')" + ;; + esac + + case "$ieee80211w" in + [012]) + ieee80211w="ieee80211w=$ieee80211w" + ;; + esac + + config_get ifname "$vif" ifname + config_get bridge "$vif" bridge + config_get ssid "$vif" ssid + config_get bssid "$vif" bssid + bssid=${bssid:+"bssid=$bssid"} + rm -rf /var/run/wpa_supplicant-$ifname + cat > /var/run/wpa_supplicant-$ifname.conf <<EOF +ctrl_interface=/var/run/wpa_supplicant-$ifname +network={ + scan_ssid=1 + ssid="$ssid" + $bssid + key_mgmt=$key_mgmt + $proto + $ieee80211w + $passphrase + $pairwise + $group + $eap_type + $ca_cert + $priv_key + $priv_key_pwd + $phase2 + $identity + $password + $wep_key0 + $wep_key1 + $wep_key2 + $wep_key3 + $wep_tx_keyidx +} +EOF + [ -z "$proto" -a "$key_mgmt" != "NONE" ] || \ + wpa_supplicant ${bridge:+ -b $bridge} -B -P "/var/run/wifi-${ifname}.pid" -D ${driver:-wext} -i "$ifname" -c /var/run/wpa_supplicant-$ifname.conf $options +} |