summaryrefslogtreecommitdiffstats
path: root/package/comgt/files/3g.sh
diff options
context:
space:
mode:
Diffstat (limited to 'package/comgt/files/3g.sh')
-rw-r--r--package/comgt/files/3g.sh119
1 files changed, 0 insertions, 119 deletions
diff --git a/package/comgt/files/3g.sh b/package/comgt/files/3g.sh
deleted file mode 100644
index 616beec4c..000000000
--- a/package/comgt/files/3g.sh
+++ /dev/null
@@ -1,119 +0,0 @@
-set_3g_led() {
- # set on WRT54G3G only
- [ -f /proc/diag/model ] || return 0
- grep -q "WRT54G3G" /proc/diag/model >/dev/null || return 0
- echo "$1" > /proc/diag/led/3g_green
- echo "$2" > /proc/diag/led/3g_blue
- grep -q "WRT54G3G$" /proc/diag/model >/dev/null || return 0
- echo "$3" > /proc/diag/led/3g_blink
-}
-
-scan_3g() {
- local device
- config_get device "$1" device
-
- # try to figure out the device if it's invalid
- [ -n "$device" -a -e "$device" ] || {
- for device in /dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2 /dev/tts/2 /dev/usb/tts/0 /dev/noz0; do
- [ -e "$device" ] && {
- config_set "$1" device "$device"
- break
- }
- done
- }
-
- # enable 3G with the 3G button by default
- local button
- config_get button "$1" button
- [ -z "$button" ] && {
- config_set "$1" button 1
- }
-}
-
-stop_interface_3g() {
- stop_interface_ppp "$1"
- set_3g_led 0 0 0
- killall gcom >/dev/null 2>/dev/null
-}
-
-setup_interface_3g() {
- local iface="$1"
- local config="$2"
- local chat="/etc/chatscripts/3g.chat"
-
- local device
- config_get device "$config" device
-
- local maxwait
- config_get maxwait "$config" maxwait
- maxwait=${maxwait:-20}
- while [ ! -e "$device" -a $maxwait -gt 0 ];do # wait for driver loading to catch up
- maxwait=$(($maxwait - 1))
- sleep 1
- done
-
- for module in slhc ppp_generic ppp_async; do
- /sbin/insmod $module 2>&- >&-
- done
-
- local apn
- config_get apn "$config" apn
-
- local service
- config_get service "$config" service
-
- local pincode
- config_get pincode "$config" pincode
-
- local mtu
- config_get mtu "$config" mtu
-
- set_3g_led 1 0 1
-
- # figure out hardware specific commands for the card
- case "$service" in
- cdma|evdo) chat="/etc/chatscripts/evdo.chat";;
- *)
- cardinfo=$(gcom -d "$device" -s /etc/gcom/getcardinfo.gcom)
- if echo "$cardinfo" | grep Novatel; then
- case "$service" in
- umts_only) CODE=2;;
- gprs_only) CODE=1;;
- *) CODE=0;;
- esac
- mode="AT\$NWRAT=${CODE},2"
- elif echo "$cardinfo" | grep Option; then
- case "$service" in
- umts_only) CODE=1;;
- gprs_only) CODE=0;;
- *) CODE=3;;
- esac
- mode="AT_OPSYS=${CODE}"
- fi
- # Don't assume Option to be default as it breaks with Huawei Cards/Sticks
-
- test -z "$pincode" || {
- PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || {
- echo "$config(3g): Failed to set the PIN code."
- set_3g_led 0 0 0
- return 1
- }
- }
- test -z "$mode" || {
- MODE="$mode" gcom -d "$device" -s /etc/gcom/setmode.gcom
- }
- esac
- set_3g_led 1 0 0
-
- config_set "$config" "connect" "${apn:+USE_APN=$apn }/usr/sbin/chat -t5 -v -E -f $chat"
- start_pppd "$config" \
- noaccomp \
- nopcomp \
- novj \
- nobsdcomp \
- noauth \
- lock \
- crtscts \
- ${mtu:+mtu $mtu mru $mtu} \
- 115200 "$device"
-}