diff options
Diffstat (limited to 'package/broadcom-diag')
| -rw-r--r-- | package/broadcom-diag/src/diag.c | 27 |
1 files changed, 27 insertions, 0 deletions
diff --git a/package/broadcom-diag/src/diag.c b/package/broadcom-diag/src/diag.c index 7e0ff02e1..997fbe864 100644 --- a/package/broadcom-diag/src/diag.c +++ b/package/broadcom-diag/src/diag.c @@ -63,6 +63,7 @@ enum { WRT600NV11, WRT610N, WRT610NV2, + E1000V1, E3000V1, /* ASUS */ @@ -421,6 +422,25 @@ static struct platform_t __initdata platforms[] = { { .name = "wlan", .gpio = 1 << 1, .polarity = NORMAL }, // Wireless LED }, }, + /* same hardware as WRT160NV3 and Cisco Valet M10V1, but different board detection, combine? */ + [E1000V1] = { + .name = "Linksys E1000 V1", + .buttons = { + { .name = "reset", .gpio = 1 << 6 }, + { .name = "wps", .gpio = 1 << 5 }, /* nvram get gpio5=wps_button */ + }, + .leds = { + /** turns on leds for all ethernet ports (wan too) + * this also disconnects some, or maybe all, ethernet ports + * 1: leds work normally + * 0: all lit all the time */ + /* nvram get gpio3=robo_reset */ + { .name = "wlan", .gpio = 1 << 0, .polarity = NORMAL }, + { .name = "power", .gpio = 1 << 1, .polarity = NORMAL }, + { .name = "ses_blue", .gpio = 1 << 4, .polarity = REVERSE }, /* nvram get gpio4=wps_led */ + { .name = "ses_orange", .gpio = 1 << 2, .polarity = REVERSE }, /* nvram get gpio2=wps_status_led */ + }, + }, [E3000V1] = { .name = "Linksys E3000 V1", .buttons = { @@ -1156,6 +1176,13 @@ static struct platform_t __init *platform_detect(void) } } + if (!strcmp(boardtype, "0x04cd")) { + if (!strcmp(getvar("boot_hw_model"), "E100")) { + if (!strcmp(getvar("boot_hw_ver"), "1.0")) + return &platforms[E1000V1]; + } + } + /* default to WRT54G */ return &platforms[WRT54G]; } |