summaryrefslogtreecommitdiffstats
path: root/package/boot/uboot-kirkwood
diff options
context:
space:
mode:
Diffstat (limited to 'package/boot/uboot-kirkwood')
-rw-r--r--package/boot/uboot-kirkwood/Makefile110
-rw-r--r--package/boot/uboot-kirkwood/files/board/iomega/iconnect/Makefile43
-rw-r--r--package/boot/uboot-kirkwood/files/board/iomega/iconnect/iconnect.c141
-rw-r--r--package/boot/uboot-kirkwood/files/board/iomega/iconnect/iconnect.h39
-rw-r--r--package/boot/uboot-kirkwood/files/board/iomega/iconnect/kwbimage.cfg165
-rw-r--r--package/boot/uboot-kirkwood/files/include/configs/iconnect.h124
-rw-r--r--package/boot/uboot-kirkwood/patches/0001-ib62x0.patch542
-rw-r--r--package/boot/uboot-kirkwood/patches/0002-kwboot.patch873
-rw-r--r--package/boot/uboot-kirkwood/patches/0003-ide_bus.patch17
-rw-r--r--package/boot/uboot-kirkwood/patches/100-iconnect.patch10
-rw-r--r--package/boot/uboot-kirkwood/patches/110-dockstar.patch35
11 files changed, 2099 insertions, 0 deletions
diff --git a/package/boot/uboot-kirkwood/Makefile b/package/boot/uboot-kirkwood/Makefile
new file mode 100644
index 000000000..48bcf9966
--- /dev/null
+++ b/package/boot/uboot-kirkwood/Makefile
@@ -0,0 +1,110 @@
+#
+# Copyright (C) 2010-2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=u-boot
+PKG_VERSION:=2012.04.01
+PKG_RELEASE:=1
+
+PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
+PKG_SOURCE_URL:=ftp://ftp.denx.de/pub/u-boot
+PKG_MD5SUM:=192bb231082d9159fb6e16de3039b6b2
+PKG_TARGETS:=bin
+
+include $(INCLUDE_DIR)/package.mk
+
+define uboot/Default
+ TITLE:=
+ CONFIG:=
+ IMAGE:=
+endef
+
+define uboot/sheevaplug
+ TITLE:=U-Boot for the SheevaPlug
+endef
+
+define uboot/dockstar
+ TITLE:=U-Boot for the Seagate DockStar
+endef
+
+define uboot/iconnect
+ TITLE:=U-Boot for the Iomega iConnect Wireless
+endef
+
+define uboot/ib62x0
+ TITLE:=U-Boot for the RaidSonic ICY BOX NAS6210 and NAS6220
+endef
+
+UBOOTS:=sheevaplug dockstar iconnect ib62x0
+
+define Package/uboot/template
+define Package/uboot-kirkwood-$(1)
+ SECTION:=boot
+ CATEGORY:=Boot Loaders
+ DEPENDS:=@TARGET_kirkwood
+ TITLE:=$(2)
+ URL:=http://www.denx.de/wiki/U-Boot
+ VARIANT:=$(1)
+endef
+endef
+
+define BuildUBootPackage
+ $(eval $(uboot/Default))
+ $(eval $(uboot/$(1)))
+ $(call Package/uboot/template,$(1),$(TITLE))
+endef
+
+ifdef BUILD_VARIANT
+$(eval $(call uboot/$(BUILD_VARIANT)))
+UBOOT_CONFIG:=$(if $(CONFIG),$(CONFIG),$(BUILD_VARIANT))
+UBOOT_IMAGE:=$(if $(IMAGE),$(IMAGE),openwrt-$(BOARD)-$(BUILD_VARIANT)-u-boot.bin)
+endif
+
+define Build/Prepare
+ $(call Build/Prepare/Default)
+ $(CP) ./files/* $(PKG_BUILD_DIR)
+endef
+
+define Build/Configure
+ $(MAKE) -C $(PKG_BUILD_DIR) \
+ $(UBOOT_CONFIG)_config
+endef
+
+define Build/Compile
+ $(MAKE) -C $(PKG_BUILD_DIR) \
+ u-boot.kwb \
+ CROSS_COMPILE=$(TARGET_CROSS)
+endef
+
+define Package/uboot/install/default
+ $(INSTALL_DIR) $(BIN_DIR)
+ $(CP) $(PKG_BUILD_DIR)/u-boot.bin \
+ $(BIN_DIR)/openwrt-$(BOARD)-$(1)-u-boot.bin
+ $(CP) $(PKG_BUILD_DIR)/u-boot.kwb \
+ $(BIN_DIR)/openwrt-$(BOARD)-$(1)-u-boot.kwb
+ $(INSTALL_DIR) $(BIN_DIR)/u-boot-kwboot/
+ $(CP) $(PKG_BUILD_DIR)/tools/kwboot \
+ $(BIN_DIR)/u-boot-kwboot/
+endef
+
+define Package/uboot/install/template
+define Package/uboot-kirkwood-$(1)/install
+ $(call Package/uboot/install/default,$(2))
+endef
+endef
+
+$(foreach u,$(UBOOTS), \
+ $(eval $(call Package/uboot/install/template,$(u),$(u))) \
+)
+
+$(foreach u,$(UBOOTS), \
+ $(eval $(call BuildUBootPackage,$(u))) \
+ $(eval $(call BuildPackage,uboot-kirkwood-$(u))) \
+)
diff --git a/package/boot/uboot-kirkwood/files/board/iomega/iconnect/Makefile b/package/boot/uboot-kirkwood/files/board/iomega/iconnect/Makefile
new file mode 100644
index 000000000..f77fcfb99
--- /dev/null
+++ b/package/boot/uboot-kirkwood/files/board/iomega/iconnect/Makefile
@@ -0,0 +1,43 @@
+#
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := iconnect.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/package/boot/uboot-kirkwood/files/board/iomega/iconnect/iconnect.c b/package/boot/uboot-kirkwood/files/board/iomega/iconnect/iconnect.c
new file mode 100644
index 000000000..34ddadf8a
--- /dev/null
+++ b/package/boot/uboot-kirkwood/files/board/iomega/iconnect/iconnect.c
@@ -0,0 +1,141 @@
+/*
+ * Copyright (C) 2009-2012
+ * Wojciech Dubowik <wojciech.dubowik@neratec.com>
+ * Luka Perkov <uboot@lukaperkov.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <common.h>
+#include <miiphy.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/kirkwood.h>
+#include <asm/arch/mpp.h>
+#include "iconnect.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+ /*
+ * default gpio configuration
+ * There are maximum 64 gpios controlled through 2 sets of registers
+ * the below configuration configures mainly initial LED status
+ */
+ kw_config_gpio(ICONNECT_OE_VAL_LOW,
+ ICONNECT_OE_VAL_HIGH,
+ ICONNECT_OE_LOW, ICONNECT_OE_HIGH);
+
+ /* Multi-Purpose Pins Functionality configuration */
+ u32 kwmpp_config[] = {
+ MPP0_NF_IO2,
+ MPP1_NF_IO3,
+ MPP2_NF_IO4,
+ MPP3_NF_IO5,
+ MPP4_NF_IO6,
+ MPP5_NF_IO7,
+ MPP6_SYSRST_OUTn,
+ MPP7_GPO,
+ MPP8_TW_SDA,
+ MPP9_TW_SCK,
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP12_GPO,
+ MPP13_SD_CMD,
+ MPP14_SD_D0,
+ MPP15_SD_D1,
+ MPP16_SD_D2,
+ MPP17_SD_D3,
+ MPP18_NF_IO0,
+ MPP19_NF_IO1,
+ MPP20_GE1_0,
+ MPP21_GE1_1,
+ MPP22_GE1_2,
+ MPP23_GE1_3,
+ MPP24_GE1_4,
+ MPP25_GE1_5,
+ MPP26_GE1_6,
+ MPP27_GE1_7,
+ MPP28_GPIO,
+ MPP29_GPIO,
+ MPP30_GE1_10,
+ MPP31_GE1_11,
+ MPP32_GE1_12,
+ MPP33_GE1_13,
+ MPP34_GE1_14,
+ MPP35_GPIO,
+ MPP36_AUDIO_SPDIFI,
+ MPP37_AUDIO_SPDIFO,
+ MPP38_GPIO,
+ MPP39_TDM_SPI_CS0,
+ MPP40_TDM_SPI_SCK,
+ MPP41_GPIO,
+ MPP42_GPIO,
+ MPP43_GPIO,
+ MPP44_GPIO,
+ MPP45_GPIO,
+ MPP46_GPIO,
+ MPP47_GPIO,
+ MPP48_GPIO,
+ MPP49_GPIO,
+ 0
+ };
+ kirkwood_mpp_conf(kwmpp_config);
+ return 0;
+}
+
+int board_init(void)
+{
+ /* Boot parameters address */
+ gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
+
+ return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+/* Configure and initialize PHY */
+void reset_phy(void)
+{
+ u16 reg;
+ u16 devadr;
+ char *name = "egiga0";
+
+ if (miiphy_set_current_dev(name))
+ return;
+
+ /* command to read PHY dev address */
+ if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) {
+ printf("Err..(%s) could not read PHY dev address\n", __func__);
+ return;
+ }
+
+ /*
+ * Enable RGMII delay on Tx and Rx for CPU port
+ * Ref: sec 4.7.2 of chip datasheet
+ */
+ miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2);
+ miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, &reg);
+ reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
+ miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg);
+ miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
+
+ /* reset the phy */
+ miiphy_reset(name, devadr);
+
+ debug("88E1116 Initialized on %s\n", name);
+}
+#endif /* CONFIG_RESET_PHY_R */
diff --git a/package/boot/uboot-kirkwood/files/board/iomega/iconnect/iconnect.h b/package/boot/uboot-kirkwood/files/board/iomega/iconnect/iconnect.h
new file mode 100644
index 000000000..2fb3e5ed8
--- /dev/null
+++ b/package/boot/uboot-kirkwood/files/board/iomega/iconnect/iconnect.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2009-2012
+ * Wojciech Dubowik <wojciech.dubowik@neratec.com>
+ * Luka Perkov <uboot@lukaperkov.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ICONNECT_H
+#define __ICONNECT_H
+
+#define ICONNECT_OE_LOW (~(1 << 7))
+#define ICONNECT_OE_HIGH (~(1 << 10))
+#define ICONNECT_OE_VAL_LOW (0)
+#define ICONNECT_OE_VAL_HIGH (1 << 10)
+
+/* PHY related */
+#define MV88E1116_LED_FCTRL_REG 10
+#define MV88E1116_CPRSP_CR3_REG 21
+#define MV88E1116_MAC_CTRL_REG 21
+#define MV88E1116_PGADR_REG 22
+#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
+#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
+
+#endif /* __ICONNECT_H */
diff --git a/package/boot/uboot-kirkwood/files/board/iomega/iconnect/kwbimage.cfg b/package/boot/uboot-kirkwood/files/board/iomega/iconnect/kwbimage.cfg
new file mode 100644
index 000000000..dee546a52
--- /dev/null
+++ b/package/boot/uboot-kirkwood/files/board/iomega/iconnect/kwbimage.cfg
@@ -0,0 +1,165 @@
+#
+# (C) Copyright 2009-2012
+# Wojciech Dubowik <wojciech.dubowik@neratec.com>
+# Luka Perkov <uboot@lukaperkov.net>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+# Refer docs/README.kwimage for more details about how-to configure
+# and create kirkwood boot image
+#
+
+# Boot Media configurations
+BOOT_FROM nand
+NAND_ECC_MODE default
+NAND_PAGE_SIZE 0x0800
+
+# SOC registers configuration using bootrom header extension
+# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
+
+# Configure RGMII-0 interface pad voltage to 1.8V
+DATA 0xffd100e0 0x1b1b1b9b
+
+#Dram initalization for SINGLE x16 CL=5 @ 400MHz
+DATA 0xffd01400 0x43000c30 # DDR Configuration register
+# bit13-0: 0xc30, (3120 DDR2 clks refresh rate)
+# bit23-14: 0x0,
+# bit24: 0x1, enable exit self refresh mode on DDR access
+# bit25: 0x1, required
+# bit29-26: 0x0,
+# bit31-30: 0x1,
+
+DATA 0xffd01404 0x37543000 # DDR Controller Control Low
+# bit4: 0x0, addr/cmd in smame cycle
+# bit5: 0x0, clk is driven during self refresh, we don't care for APX
+# bit6: 0x0, use recommended falling edge of clk for addr/cmd
+# bit14: 0x0, input buffer always powered up
+# bit18: 0x1, cpu lock transaction enabled
+# bit23-20: 0x5, recommended value for CL=5 and STARTBURST_DEL disabled bit31=0
+# bit27-24: 0x7, CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM
+# bit30-28: 0x3, required
+# bit31: 0x0, no additional STARTBURST delay
+
+DATA 0xffd01408 0x22125451 # DDR Timing (Low) (active cycles value +1)
+# bit3-0: TRAS lsbs
+# bit7-4: TRCD
+# bit11-8: TRP
+# bit15-12: TWR
+# bit19-16: TWTR
+# bit20: TRAS msb
+# bit23-21: 0x0
+# bit27-24: TRRD
+# bit31-28: TRTP
+
+DATA 0xffd0140c 0x00000a33 # DDR Timing (High)
+# bit6-0: TRFC
+# bit8-7: TR2R
+# bit10-9: TR2W
+# bit12-11: TW2W
+# bit31-13: 0x0, required
+
+DATA 0xffd01410 0x000000cc # DDR Address Control
+# bit1-0: 00, Cs0width (x8)
+# bit3-2: 11, Cs0size (1Gb)
+# bit5-4: 00, Cs1width (x8)
+# bit7-6: 11, Cs1size (1Gb)
+# bit9-8: 00, Cs2width (nonexistent)
+# bit11-10: 00, Cs2size (nonexistent)
+# bit13-12: 00, Cs3width (nonexistent)
+# bit15-14: 00, Cs3size (nonexistent)
+# bit16: 0, Cs0AddrSel
+# bit17: 0, Cs1AddrSel
+# bit18: 0, Cs2AddrSel
+# bit19: 0, Cs3AddrSel
+# bit31-20: 0x0, required
+
+DATA 0xffd01414 0x00000000 # DDR Open Pages Control
+# bit0: 0, OpenPage enabled
+# bit31-1: 0x0, required
+
+DATA 0xffd01418 0x00000000 # DDR Operation
+# bit3-0: 0x0, DDR cmd
+# bit31-4: 0x0, required
+
+DATA 0xffd0141c 0x00000c52 # DDR Mode
+# bit2-0: 0x2, BurstLen=2 required
+# bit3: 0x0, BurstType=0 required
+# bit6-4: 0x4, CL=5
+# bit7: 0x0, TestMode=0 normal
+# bit8: 0x0, DLL reset=0 normal
+# bit11-9: 0x6, auto-precharge write recovery ????????????
+# bit12: 0x0, PD must be zero
+# bit31-13: 0x0, required
+
+DATA 0xffd01420 0x00000040 # DDR Extended Mode
+# bit0: 0, DDR DLL enabled
+# bit1: 0, DDR drive strenght normal
+# bit2: 0, DDR ODT control lsd (disabled)
+# bit5-3: 0x0, required
+# bit6: 1, DDR ODT control msb, (disabled)
+# bit9-7: 0x0, required
+# bit10: 0, differential DQS enabled
+# bit11: 0, required
+# bit12: 0, DDR output buffer enabled
+# bit31-13: 0x0, required
+
+DATA 0xffd01424 0x0000f17f # DDR Controller Control High
+# bit2-0: 0x7, required
+# bit3: 0x1, MBUS Burst Chop disabled
+# bit6-4: 0x7, required
+# bit7: 0x0,
+# bit8: 0x1, add writepath sample stage, must be 1 for DDR freq >= 300MHz
+# bit9: 0x0, no half clock cycle addition to dataout
+# bit10: 0x0, 1/4 clock cycle skew enabled for addr/ctl signals
+# bit11: 0x0, 1/4 clock cycle skew disabled for write mesh
+# bit15-12: 0xf, required
+# bit31-16: 0x0, required
+
+DATA 0xffd01428 0x00085520 # DDR2 ODT Read Timing (default values)
+DATA 0xffd0147c 0x00008552 # DDR2 ODT Write Timing (default values)
+
+DATA 0xffd01500 0x00000000 # CS[0]n Base address to 0x0
+DATA 0xffd01504 0x0ffffff1 # CS[0]n Size
+# bit0: 0x1, Window enabled
+# bit1: 0x0, Write Protect disabled
+# bit3-2: 0x0, CS0 hit selected
+# bit23-4: 0xfffff, required
+# bit31-24: 0x0f, Size (i.e. 256MB)
+
+DATA 0xffd01508 0x00000000 # CS[1]n Base address to 256Mb
+DATA 0xffd0150c 0x00000000 # CS[1]n Size 256Mb Window enabled for CS1
+
+DATA 0xffd01514 0x00000000 # CS[2]n Size, window disabled
+DATA 0xffd0151c 0x00000000 # CS[3]n Size, window disabled
+
+DATA 0xffd01494 0x00030000 # DDR ODT Control (Low)
+# bit3-0: ODT0Rd, MODT[0] asserted during read from DRAM CS1
+# bit7-4: ODT0Rd, MODT[0] asserted during read from DRAM CS0
+# bit19-16:2, ODT0Wr, MODT[0] asserted during write to DRAM CS1
+# bit23-20:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0
+
+DATA 0xffd01498 0x00000000 # DDR ODT Control (High)
+# bit1-0: 0x0, ODT0 controlled by ODT Control (low) register above
+# bit3-2: 0x1, ODT1 active NEVER!
+# bit31-4: 0x0, required
+
+DATA 0xffd0149c 0x0000e803 # CPU ODT Control
+DATA 0xffd01480 0x00000001 # DDR Initialization Control
+# bit0: 0x1, enable DDR init upon this register write
+
+# End of Header extension
+DATA 0x0 0x0
diff --git a/package/boot/uboot-kirkwood/files/include/configs/iconnect.h b/package/boot/uboot-kirkwood/files/include/configs/iconnect.h
new file mode 100644
index 000000000..59432f14d
--- /dev/null
+++ b/package/boot/uboot-kirkwood/files/include/configs/iconnect.h
@@ -0,0 +1,124 @@
+/*
+ * (C) Copyright 2009-2012
+ * Wojciech Dubowik <wojciech.dubowik@neratec.com>
+ * Luka Perkov <uboot@lukaperkov.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _CONFIG_ICONNECT_H
+#define _CONFIG_ICONNECT_H
+
+/*
+ * Version number information
+ */
+#define CONFIG_IDENT_STRING " Iomega iConnect Wireless"
+
+/*
+ * High level configuration options
+ */
+#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
+#define CONFIG_KIRKWOOD /* SOC Family Name */
+#define CONFIG_KW88F6281 /* SOC Name */
+#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
+#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */
+
+/*
+ * Machine type
+ */
+#define CONFIG_MACH_TYPE MACH_TYPE_ICONNECT
+
+
+/*
+ * Commands configuration
+ */
+#define CONFIG_SYS_NO_FLASH /* declare no flash (NOR/SPI) */
+#define CONFIG_SYS_MVFS
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_USB
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+
+#undef CONFIG_SYS_PROMPT
+#define CONFIG_SYS_PROMPT "iconnect => "
+
+/*
+ * Environment variables configuration
+ */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SECT_SIZE 0x20000
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#endif
+#define CONFIG_ENV_SIZE 0x20000
+#define CONFIG_ENV_OFFSET 0xc0000
+
+/*
+ * Default environment variables
+ */
+#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \
+ "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
+ "${x_bootcmd_usb}; bootm 0x6400000;"
+
+#define CONFIG_MTDPARTS "orion_nand:1M(u-boot)," \
+ "3M@1M(kernel),32M@4M(rootfs),475M@36M(data)\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \
+ "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \
+ "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \
+ "x_bootcmd_usb=usb start\0" \
+ "x_bootargs_root=root=/dev/mtdblock2 rw rootfstype=jffs2\0"
+
+/*
+ * Ethernet driver configuration
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
+#define CONFIG_PHY_BASE_ADR 11
+#endif /* CONFIG_CMD_NET */
+
+/*
+ * SATA driver configuration
+ */
+#ifdef CONFIG_CMD_IDE
+#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
+#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
+#endif /* CONFIG_CMD_IDE */
+
+/*
+ * File system
+ */
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_RBTREE
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+
+#endif /* _CONFIG_ICONNECT_H */
diff --git a/package/boot/uboot-kirkwood/patches/0001-ib62x0.patch b/package/boot/uboot-kirkwood/patches/0001-ib62x0.patch
new file mode 100644
index 000000000..0a7dc47a5
--- /dev/null
+++ b/package/boot/uboot-kirkwood/patches/0001-ib62x0.patch
@@ -0,0 +1,542 @@
+http://lists.denx.de/pipermail/u-boot/2012-April/122597.html
+http://patchwork.ozlabs.org/patch/153293/
+---
+
+diff --git a/MAINTAINERS b/MAINTAINERS
+index 708ded7..9d2aba7 100644
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -777,6 +777,10 @@ Linus Walleij <linus.walleij@linaro.org>
+ integratorap various
+ integratorcp various
+
++Luka Perkov <uboot@lukaperkov.net>
++
++ ib62x0 ARM926EJS
++
+ Dave Peverley <dpeverley@mpc-data.co.uk>
+
+ omap730p2 ARM926EJS
+diff --git a/board/raidsonic/ib62x0/Makefile b/board/raidsonic/ib62x0/Makefile
+new file mode 100644
+index 0000000..d450f8d
+--- /dev/null
++++ b/board/raidsonic/ib62x0/Makefile
+@@ -0,0 +1,43 @@
++#
++# (C) Copyright 2009
++# Marvell Semiconductor <www.marvell.com>
++# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program. If not, see <http://www.gnu.org/licenses/>.
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(BOARD).o
++
++COBJS := ib62x0.o
++
++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS))
++SOBJS := $(addprefix $(obj),$(SOBJS))
++
++$(LIB): $(obj).depend $(OBJS) $(SOBJS)
++ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+diff --git a/board/raidsonic/ib62x0/ib62x0.c b/board/raidsonic/ib62x0/ib62x0.c
+new file mode 100644
+index 0000000..65f2c2e
+--- /dev/null
++++ b/board/raidsonic/ib62x0/ib62x0.c
+@@ -0,0 +1,79 @@
++/*
++ * Copyright (C) 2011-2012
++ * Gerald Kerma <dreagle@doukki.net>
++ * Luka Perkov <uboot@lukaperkov.net>
++ * Simon Baatz <gmbnomis@gmail.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <common.h>
++#include <miiphy.h>
++#include <asm/arch/cpu.h>
++#include <asm/arch/kirkwood.h>
++#include <asm/arch/mpp.h>
++#include "ib62x0.h"
++
++DECLARE_GLOBAL_DATA_PTR;
++
++int board_early_init_f(void)
++{
++ /*
++ * default gpio configuration
++ * There are maximum 64 gpios controlled through 2 sets of registers
++ * the below configuration configures mainly initial LED status
++ */
++ kw_config_gpio(IB62x0_OE_VAL_LOW,
++ IB62x0_OE_VAL_HIGH,
++ IB62x0_OE_LOW, IB62x0_OE_HIGH);
++
++ /* Multi-Purpose Pins Functionality configuration */
++ u32 kwmpp_config[] = {
++ MPP0_NF_IO2,
++ MPP1_NF_IO3,
++ MPP2_NF_IO4,
++ MPP3_NF_IO5,
++ MPP4_NF_IO6,
++ MPP5_NF_IO7,
++ MPP6_SYSRST_OUTn,
++ MPP8_TW_SDA,
++ MPP9_TW_SCK,
++ MPP10_UART0_TXD,
++ MPP11_UART0_RXD,
++ MPP18_NF_IO0,
++ MPP19_NF_IO1,
++ MPP20_SATA1_ACTn,
++ MPP21_SATA0_ACTn,
++ MPP22_GPIO, /* Power LED red */
++ MPP24_GPIO, /* Power off device */
++ MPP25_GPIO, /* Power LED green */
++ MPP27_GPIO, /* USB transfer LED */
++ MPP28_GPIO, /* Reset button */
++ MPP29_GPIO, /* USB Copy button */
++ 0
++ };
++ kirkwood_mpp_conf(kwmpp_config);
++ return 0;
++}
++
++int board_init(void)
++{
++ /* adress of boot parameters */
++ gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
++
++ return 0;
++}
+diff --git a/board/raidsonic/ib62x0/ib62x0.h b/board/raidsonic/ib62x0/ib62x0.h
+new file mode 100644
+index 0000000..0c30690
+--- /dev/null
++++ b/board/raidsonic/ib62x0/ib62x0.h
+@@ -0,0 +1,40 @@
++/*
++ * Copyright (C) 2011-2012
++ * Gerald Kerma <dreagle@doukki.net>
++ * Simon Baatz <gmbnomis@gmail.com>
++ * Luka Perkov <uboot@lukaperkov.net>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#ifndef __IB62x0_H
++#define __IB62x0_H
++
++#define IB62x0_OE_LOW (~(1 << 22 | 1 << 24 | 1 << 25 | 1 << 27))
++#define IB62x0_OE_HIGH (~(0))
++#define IB62x0_OE_VAL_LOW 0
++#define IB62x0_OE_VAL_HIGH 0
++
++/* PHY related */
++#define MV88E1116_LED_FCTRL_REG 10
++#define MV88E1116_CPRSP_CR3_REG 21
++#define MV88E1116_MAC_CTRL_REG 21
++#define MV88E1116_PGADR_REG 22
++#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
++#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
++
++#endif /* __IB62x0_H */
+diff --git a/board/raidsonic/ib62x0/kwbimage.cfg b/board/raidsonic/ib62x0/kwbimage.cfg
+new file mode 100644
+index 0000000..bd594eb
+--- /dev/null
++++ b/board/raidsonic/ib62x0/kwbimage.cfg
+@@ -0,0 +1,169 @@
++#
++# Copyright (C) 2011-2012
++# Gerald Kerma <dreagle@doukki.net>
++# Simon Baatz <gmbnomis@gmail.com>
++# Luka Perkov <uboot@lukaperkov.net>
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program. If not, see <http://www.gnu.org/licenses/>.
++#
++# Refer docs/README.kwimage for more details about how-to configure
++# and create kirkwood boot image
++#
++
++# Boot Media configurations
++BOOT_FROM nand # change from nand to uart if building UART image
++NAND_ECC_MODE default
++NAND_PAGE_SIZE 0x0800
++
++# SOC registers configuration using bootrom header extension
++# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
++
++# Configure RGMII-0 interface pad voltage to 1.8V
++DATA 0xffd100e0 0x1b1b1b9b
++
++#Dram initalization for SINGLE x16 CL=5 @ 400MHz
++DATA 0xffd01400 0x43000c30 # DDR Configuration register
++# bit13-0: 0xc30, (3120 DDR2 clks refresh rate)
++# bit23-14: 0x0,
++# bit24: 0x1, enable exit self refresh mode on DDR access
++# bit25: 0x1, required
++# bit29-26: 0x0,
++# bit31-30: 0x1,
++
++DATA 0xffd01404 0x37543000 # DDR Controller Control Low
++# bit4: 0x0, addr/cmd in smame cycle
++# bit5: 0x0, clk is driven during self refresh, we don't care for APX
++# bit6: 0x0, use recommended falling edge of clk for addr/cmd
++# bit14: 0x0, input buffer always powered up
++# bit18: 0x1, cpu lock transaction enabled
++# bit23-20: 0x5, recommended value for CL=5 and STARTBURST_DEL disabled bit31=0
++# bit27-24: 0x7, CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM
++# bit30-28: 0x3, required
++# bit31: 0x0, no additional STARTBURST delay
++
++DATA 0xffd01408 0x22125451 # DDR Timing (Low) (active cycles value +1)
++# bit3-0: TRAS lsbs
++# bit7-4: TRCD
++# bit11-8: TRP
++# bit15-12: TWR
++# bit19-16: TWTR
++# bit20: TRAS msb
++# bit23-21: 0x0
++# bit27-24: TRRD
++# bit31-28: TRTP
++
++DATA 0xffd0140c 0x00000a33 # DDR Timing (High)
++# bit6-0: TRFC
++# bit8-7: TR2R
++# bit10-9: TR2W
++# bit12-11: TW2W
++# bit31-13: 0x0, required
++
++DATA 0xffd01410 0x0000000c # DDR Address Control
++# bit1-0: 00, Cs0width (x8)
++# bit3-2: 11, Cs0size (1Gb)
++# bit5-4: 00, Cs1width (x8)
++# bit7-6: 11, Cs1size (1Gb)
++# bit9-8: 00, Cs2width (nonexistent
++# bit11-10: 00, Cs2size (nonexistent
++# bit13-12: 00, Cs3width (nonexistent
++# bit15-14: 00, Cs3size (nonexistent
++# bit16: 0, Cs0AddrSel
++# bit17: 0, Cs1AddrSel
++# bit18: 0, Cs2AddrSel
++# bit19: 0, Cs3AddrSel
++# bit31-20: 0x0, required
++
++DATA 0xffd01414 0x00000000 # DDR Open Pages Control
++# bit0: 0, OpenPage enabled
++# bit31-1: 0x0, required
++
++DATA 0xffd01418 0x00000000 # DDR Operation
++# bit3-0: 0x0, DDR cmd
++# bit31-4: 0x0, required
++
++DATA 0xffd0141c 0x00000c52 # DDR Mode
++# bit2-0: 0x2, BurstLen=2 required
++# bit3: 0x0, BurstType=0 required
++# bit6-4: 0x4, CL=5
++# bit7: 0x0, TestMode=0 normal
++# bit8: 0x0, DLL reset=0 normal
++# bit11-9: 0x6, auto-precharge write recovery ????????????
++# bit12: 0x0, PD must be zero
++# bit31-13: 0x0, required
++
++DATA 0xffd01420 0x00000040 # DDR Extended Mode
++# bit0: 0, DDR DLL enabled
++# bit1: 0, DDR drive strenght normal
++# bit2: 1, DDR ODT control lsd (disabled)
++# bit5-3: 0x0, required
++# bit6: 0, DDR ODT control msb, (disabled)
++# bit9-7: 0x0, required
++# bit10: 0, differential DQS enabled
++# bit11: 0, required
++# bit12: 0, DDR output buffer enabled
++# bit31-13: 0x0, required
++
++DATA 0xffd01424 0x0000f17f # DDR Controller Control High
++# bit2-0: 0x7, required
++# bit3: 0x1, MBUS Burst Chop disabled
++# bit6-4: 0x7, required
++# bit7: 0x0,
++# bit8: 0x1, add writepath sample stage, must be 1 for DDR freq >= 300MHz
++# bit9: 0x0, no half clock cycle addition to dataout
++# bit10: 0x0, 1/4 clock cycle skew enabled for addr/ctl signals
++# bit11: 0x0, 1/4 clock cycle skew disabled for write mesh
++# bit15-12: 0xf, required
++# bit31-16: 0, required
++
++DATA 0xffd01428 0x00085520 # DDR2 ODT Read Timing (default values)
++DATA 0xffd0147c 0x00008552 # DDR2 ODT Write Timing (default values)
++
++DATA 0xffd01500 0x00000000 # CS[0]n Base address to 0x0
++DATA 0xffd01504 0x0ffffff1 # CS[0]n Size
++# bit0: 0x1, Window enabled
++# bit1: 0x0, Write Protect disabled
++# bit3-2: 0x0, CS0 hit selected
++# bit23-4: 0xfffff, required
++# bit31-24: 0x0f, Size (i.e. 256MB)
++
++DATA 0xffd01508 0x10000000 # CS[1]n Base address to 256Mb
++DATA 0xffd0150c 0x00000000 # CS[1]n Size, window disabled
++
++DATA 0xffd01514 0x00000000 # CS[2]n Size, window disabled
++DATA 0xffd0151c 0x00000000 # CS[3]n Size, window disabled
++
++DATA 0xffd01494 0x00030000 # DDR ODT Control (Low)
++# bit3-0: ODT0Rd, MODT[0] asserted during read from DRAM CS1
++# bit7-4: ODT0Rd, MODT[0] asserted during read from DRAM CS0
++# bit19-16:2, ODT0Wr, MODT[0] asserted during write to DRAM CS1
++# bit23-20:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0
++
++DATA 0xffd01498 0x00000000 # DDR ODT Control (High)
++# bit1-0: 0x0, ODT0 controlled by ODT Control (low) register above
++# bit3-2: 0x1, ODT1 active NEVER!
++# bit31-4: 0x0, required
++
++DATA 0xffd0149c 0x0000e803 # CPU ODT Control
++DATA 0xffd01480 0x00000001 # DDR Initialization Control
++# bit0: 0x1, enable DDR init upon this register write
++
++DATA 0xFFD20134 0x66666666 # L2 RAM Timing 0 Register
++DATA 0xFFD20138 0x66666666 # L2 RAM Timing 1 Register
++
++# End of Header extension
++DATA 0x0 0x0
+diff --git a/boards.cfg b/boards.cfg
+index 3cf75c3..23f84e8 100644
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -153,6 +153,7 @@ openrd_client arm arm926ejs openrd Marvell
+ openrd_ultimate arm arm926ejs openrd Marvell kirkwood openrd:BOARD_IS_OPENRD_ULTIMATE
+ rd6281a arm arm926ejs - Marvell kirkwood
+ sheevaplug arm arm926ejs - Marvell kirkwood
++ib62x0 arm arm926ejs ib62x0 raidsonic kirkwood
+ dockstar arm arm926ejs - Seagate kirkwood
+ jadecpu arm arm926ejs jadecpu syteco mb86r0x
+ mx25pdk arm arm926ejs mx25pdk freescale mx25 mx25pdk:IMX_CONFIG=board/freescale/mx25pdk/imximage.cfg
+diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h
+new file mode 100644
+index 0000000..85856f2
+--- /dev/null
++++ b/include/configs/ib62x0.h
+@@ -0,0 +1,150 @@
++/*
++ * Copyright (C) 2011-2012
++ * Gerald Kerma <dreagle@doukki.net>
++ * Luka Perkov <uboot@lukaperkov.net>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#ifndef _CONFIG_IB62x0_H
++#define _CONFIG_IB62x0_H
++
++/*
++ * Version number information
++ */
++#define CONFIG_IDENT_STRING " RaidSonic ICY BOX IB-NAS62x0"
++
++/*
++ * High level configuration options
++ */
++#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
++#define CONFIG_KIRKWOOD /* SOC Family Name */
++#define CONFIG_KW88F6281 /* SOC Name */
++#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
++
++/*
++ * Machine type
++ */
++#define CONFIG_MACH_TYPE MACH_TYPE_NAS6210
++
++/*
++ * Compression configuration
++ */
++#define CONFIG_BZIP2
++#define CONFIG_LZMA
++#define CONFIG_LZO
++
++/*
++ * Commands configuration
++ */
++#define CONFIG_SYS_NO_FLASH /* declare no flash (NOR/SPI) */
++#define CONFIG_SYS_MVFS
++#include <config_cmd_default.h>
++#define CONFIG_CMD_ENV
++#define CONFIG_CMD_IDE
++#define CONFIG_CMD_MII
++#define CONFIG_CMD_NAND
++#define CONFIG_CMD_PING
++#define CONFIG_CMD_USB
++
++/*
++ * mv-common.h should be defined after CMD configs since it used them
++ * to enable certain macros
++ */
++#include "mv-common.h"
++
++#undef CONFIG_SYS_PROMPT
++#define CONFIG_SYS_PROMPT "ib62x0 => "
++
++/*
++ * Environment variables configuration
++ */
++#ifdef CONFIG_CMD_NAND
++#define CONFIG_ENV_IS_IN_NAND
++#define CONFIG_ENV_SECT_SIZE 0x20000
++#else
++#define CONFIG_ENV_IS_NOWHERE
++#endif
++#define CONFIG_ENV_SIZE 0x20000
++#define CONFIG_ENV_OFFSET 0x80000
++
++/*
++ * Default environment variables
++ */
++#define CONFIG_BOOTCOMMAND \
++ "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
++ "ubi part rootfs; " \
++ "ubifsmount rootfs; " \
++ "ubifsload 0x800000 ${kernel}; " \
++ "bootm 0x800000"
++
++#define CONFIG_MTDPARTS \
++ "mtdparts=orion_nand:" \
++ "0x80000@0x0(uboot)," \
++ "0x20000@0x80000(uboot_env)," \
++ "-@0xa0000(rootfs)\0"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ "console=console=ttyS0,115200\0" \
++ "mtdids=nand0=orion_nand\0" \
++ "mtdparts="CONFIG_MTDPARTS \
++ "kernel=/boot/uImage\0" \
++ "bootargs_root=noinitrd ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0"
++
++/*
++ * Ethernet driver configuration
++ */
++#ifdef CONFIG_CMD_NET
++#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
++#define CONFIG_PHY_BASE_ADR 0
++#undef CONFIG_RESET_PHY_R
++#endif /* CONFIG_CMD_NET */
++
++/*
++ * SATA driver configuration
++ */
++#ifdef CONFIG_CMD_IDE
++#define __io
++#define CONFIG_IDE_PREINIT
++#define CONFIG_DOS_PARTITION
++#define CONFIG_MVSATA_IDE_USE_PORT0
++#define CONFIG_MVSATA_IDE_USE_PORT1
++#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
++#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
++#endif /* CONFIG_CMD_IDE */
++
++/*
++ * RTC driver configuration
++ */
++#ifdef CONFIG_CMD_DATE
++#define CONFIG_RTC_MV
++#endif /* CONFIG_CMD_DATE */
++
++/*
++ * File system
++ */
++#define CONFIG_CMD_EXT2
++#define CONFIG_CMD_FAT
++#define CONFIG_CMD_JFFS2
++#define CONFIG_CMD_UBI
++#define CONFIG_CMD_UBIFS
++#define CONFIG_RBTREE
++#define CONFIG_MTD_DEVICE
++#define CONFIG_MTD_PARTITIONS
++#define CONFIG_CMD_MTDPARTS
++
++#endif /* _CONFIG_IB62x0_H */
diff --git a/package/boot/uboot-kirkwood/patches/0002-kwboot.patch b/package/boot/uboot-kirkwood/patches/0002-kwboot.patch
new file mode 100644
index 000000000..091d6a164
--- /dev/null
+++ b/package/boot/uboot-kirkwood/patches/0002-kwboot.patch
@@ -0,0 +1,873 @@
+http://lists.denx.de/pipermail/u-boot/2012-May/125296.html
+http://patchwork.ozlabs.org/patch/161566/
+---
+
+diff --git a/doc/kwboot.1 b/doc/kwboot.1
+new file mode 100644
+index 0000000..ed08398
+--- /dev/null
++++ b/doc/kwboot.1
+@@ -0,0 +1,84 @@
++.TH KWBOOT 1 "2012-05-19"
++
++.SH NAME
++kwboot \- Boot Marvell Kirkwood SoCs over a serial link.
++.SH SYNOPSIS
++.B kwboot
++.RB [ "-b \fIimage\fP" ]
++.RB [ "-p" ]
++.RB [ "-t" ]
++.RB [ "-B \fIbaudrate\fP" ]
++.RB \fITTY\fP
++.SH "DESCRIPTION"
++
++The \fBmkimage\fP program boots boards based on Marvell's Kirkwood
++platform over their integrated UART. Boot image files will typically
++contain a second stage boot loader, such as U-Boot. The image file
++must conform to Marvell's BootROM firmware image format
++(\fIkwbimage\fP), created using a tool such as \fBmkimage\fP.
++
++Following power-up or a system reset, system BootROM code polls the
++UART for a brief period of time, sensing a handshake message which
++initiates an image upload. This program sends this boot message until
++it receives a positive acknowledgement. The image is transfered using
++Xmodem.
++
++Additionally, this program implements a minimal terminal mode, which
++can be used either standalone, or entered immediately following boot
++image transfer completion. This is often useful to catch early boot
++messages, or to manually interrupt a default boot procedure performed
++by the second-stage loader.
++
++.SH "OPTIONS"
++
++.TP
++.BI "\-b \fIimage\fP"
++Handshake; then upload file \fIimage\fP over \fITTY\fP.
++
++Note that for the encapsulated boot code to be executed, \fIimage\fP
++must be of type "UART boot" (0x69). Boot images of different types,
++such as backup images of vendor firmware downloaded from flash memory
++(type 0x8B), will not work (or not as expected). See \fB-p\fP for a
++workaround.
++
++This mode writes handshake status and upload progress indication to
++stdout.
++
++.TP
++.BI "\-p"
++In combination with \fB-b\fP, patches the header in \fIimage\fP prior
++to upload, to "UART boot" type.
++
++This option attempts on-the-fly conversion of some none-UART image
++types, such as images which were originally formatted to be stored in
++flash memory.
++
++Conversion is performed in memory. The contents of \fIimage\fP will
++not be altered.
++
++.TP
++.BI "\-t"
++Run a terminal program, connecting standard input and output to
++.RB \fITTY\fP.
++
++If used in combination with \fB-b\fP, terminal mode is entered
++immediately following a successful image upload.
++
++If standard I/O streams connect to a console, this mode will terminate
++after receiving 'ctrl-\\' followed by 'c' from console input.
++
++.TP
++.BI "\-B \fIbaudrate\fP"
++Adjust the baud rate on \fITTY\fP. Default rate is 115200.
++
++.SH "SEE ALSO"
++.PP
++\fBmkimage\fP(1)
++
++.SH "AUTHORS"
++
++Daniel Stodden <daniel.stodden@gmail.com>
++.br
++Luka Perkov <uboot@lukaperkov.net>
++.br
++David Purdy <david.c.purdy@gmail.com>
+diff --git a/tools/Makefile b/tools/Makefile
+index 8993fdd..8097d95 100644
+--- a/tools/Makefile
++++ b/tools/Makefile
+@@ -72,6 +72,7 @@ BIN_FILES-$(CONFIG_SMDK5250) += mksmdk5250spl$(SFX)
+ BIN_FILES-$(CONFIG_MX28) += mxsboot$(SFX)
+ BIN_FILES-$(CONFIG_NETCONSOLE) += ncb$(SFX)
+ BIN_FILES-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1$(SFX)
++BIN_FILES-$(CONFIG_KIRKWOOD) += kwboot$(SFX)
+
+ # Source files which exist outside the tools directory
+ EXT_OBJ_FILES-$(CONFIG_BUILD_ENVCRC) += common/env_embedded.o
+@@ -101,6 +102,7 @@ OBJ_FILES-$(CONFIG_NETCONSOLE) += ncb.o
+ NOPED_OBJ_FILES-y += os_support.o
+ OBJ_FILES-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1.o
+ NOPED_OBJ_FILES-y += ublimage.o
++OBJ_FILES-$(CONFIG_KIRKWOOD) += kwboot.o
+
+ # Don't build by default
+ #ifeq ($(ARCH),ppc)
+@@ -234,6 +236,10 @@ $(obj)ncb$(SFX): $(obj)ncb.o
+ $(obj)ubsha1$(SFX): $(obj)os_support.o $(obj)sha1.o $(obj)ubsha1.o
+ $(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^
+
++$(obj)kwboot$(SFX): $(obj)kwboot.o
++ $(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^
++ $(HOSTSTRIP) $@
++
+ # Some of the tool objects need to be accessed from outside the tools directory
+ $(obj)%.o: $(SRCTREE)/common/%.c
+ $(HOSTCC) -g $(HOSTCFLAGS_NOPED) -c -o $@ $<
+diff --git a/tools/kwboot.c b/tools/kwboot.c
+new file mode 100644
+index 0000000..e773f01
+--- /dev/null
++++ b/tools/kwboot.c
+@@ -0,0 +1,742 @@
++/*
++ * Boot a Marvell Kirkwood SoC, with Xmodem over UART0.
++ *
++ * (c) 2012 Daniel Stodden <daniel.stodden@gmail.com>
++ *
++ * References: marvell.com, "88F6180, 88F6190, 88F6192, and 88F6281
++ * Integrated Controller: Functional Specifications" December 2,
++ * 2008. Chapter 24.2 "BootROM Firmware".
++ */
++
++#include <stdlib.h>
++#include <stdio.h>
++#include <string.h>
++#include <stdarg.h>
++#include <libgen.h>
++#include <fcntl.h>
++#include <errno.h>
++#include <unistd.h>
++#include <stdint.h>
++#include <termios.h>
++#include <sys/mman.h>
++#include <sys/stat.h>
++
++#include "kwbimage.h"
++
++#ifdef __GNUC__
++#define PACKED __attribute((packed))
++#else
++#define PACKED
++#endif
++
++/*
++ * Marvell BootROM UART Sensing
++ */
++
++static unsigned char kwboot_msg_boot[] = {
++ 0xBB, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77
++};
++
++#define KWBOOT_MSG_REQ_DELAY 10 /* ms */
++#define KWBOOT_MSG_RSP_TIMEO 50 /* ms */
++
++/*
++ * Xmodem Transfers
++ */
++
++#define SOH 1 /* sender start of block header */
++#define EOT 4 /* sender end of block transfer */
++#define ACK 6 /* target block ack */
++#define NAK 21 /* target block negative ack */
++#define CAN 24 /* target/sender transfer cancellation */
++
++struct kwboot_block {
++ uint8_t soh;
++ uint8_t pnum;
++ uint8_t _pnum;
++ uint8_t data[128];
++ uint8_t csum;
++} PACKED;
++
++#define KWBOOT_BLK_RSP_TIMEO 1000 /* ms */
++
++static int kwboot_verbose;
++
++static void
++kwboot_printv(const char *fmt, ...)
++{
++ va_list ap;
++
++ if (kwboot_verbose) {
++ va_start(ap, fmt);
++ vprintf(fmt, ap);
++ va_end(ap);
++ fflush(stdout);
++ }
++}
++
++static void
++__spinner(void)
++{
++ const char seq[] = { '-', '\\', '|', '/' };
++ const int div = 8;
++ static int state, bs;
++
++ if (state % div == 0) {
++ fputc(bs, stdout);
++ fputc(seq[state / div % sizeof(seq)], stdout);
++ fflush(stdout);
++ }
++
++ bs = '\b';
++ state++;
++}
++
++static void
++kwboot_spinner(void)
++{
++ if (kwboot_verbose)
++ __spinner();
++}
++
++static void
++__progress(int pct, char c)
++{
++ const int width = 70;
++ static const char *nl = "";
++ static int pos;
++
++ if (pos % width == 0)
++ printf("%s%3d %% [", nl, pct);
++
++ fputc(c, stdout);
++
++ nl = "]\n";
++ pos++;
++
++ if (pct == 100) {
++ while (pos++ < width)
++ fputc(' ', stdout);
++ fputs(nl, stdout);
++ }
++
++ fflush(stdout);
++
++}
++
++static void
++kwboot_progress(int _pct, char c)
++{
++ static int pct;
++
++ if (_pct != -1)
++ pct = _pct;
++
++ if (kwboot_verbose)
++ __progress(pct, c);
++}
++
++static int
++kwboot_tty_recv(int fd, void *buf, size_t len, int timeo)
++{
++ int rc, nfds;
++ fd_set rfds;
++ struct timeval tv;
++ ssize_t n;
++
++ rc = -1;
++
++ FD_ZERO(&rfds);
++ FD_SET(fd, &rfds);
++
++ tv.tv_sec = 0;
++ tv.tv_usec = timeo * 1000;
++ if (tv.tv_usec > 1000000) {
++ tv.tv_sec += tv.tv_usec / 1000000;
++ tv.tv_usec %= 1000000;
++ }
++
++ do {
++ nfds = select(fd + 1, &rfds, NULL, NULL, &tv);
++ if (nfds < 0)
++ goto out;
++ if (!nfds) {
++ errno = ETIMEDOUT;
++ goto out;
++ }
++
++ n = read(fd, buf, len);
++ if (n < 0)
++ goto out;
++
++ buf = (char *)buf + n;
++ len -= n;
++ } while (len > 0);
++
++ rc = 0;
++out:
++ return rc;
++}
++
++static int
++kwboot_tty_send(int fd, const void *buf, size_t len)
++{
++ int rc;
++ ssize_t n;
++
++ rc = -1;
++
++ do {
++ n = write(fd, buf, len);
++ if (n < 0)
++ goto out;
++
++ buf = (char *)buf + n;
++ len -= n;
++ } while (len > 0);
++
++ rc = tcdrain(fd);
++out:
++ return rc;
++}
++
++static int
++kwboot_tty_send_char(int fd, unsigned char c)
++{
++ return kwboot_tty_send(fd, &c, 1);
++}
++
++static speed_t
++kwboot_tty_speed(int baudrate)
++{
++ switch (baudrate) {
++ case 115200:
++ return B115200;
++ case 57600:
++ return B57600;
++ case 38400:
++ return B38400;
++ case 19200:
++ return B19200;
++ case 9600:
++ return B9600;
++ }
++
++ return -1;
++}
++
++static int
++kwboot_open_tty(const char *path, speed_t speed)
++{
++ int rc, fd;
++ struct termios tio;
++
++ rc = -1;
++
++ fd = open(path, O_RDWR|O_NOCTTY|O_NDELAY);
++ if (fd < 0)
++ goto out;
++
++ memset(&tio, 0, sizeof(tio));
++
++ tio.c_iflag = 0;
++ tio.c_cflag = CREAD|CLOCAL|CS8;
++
++ tio.c_cc[VMIN] = 1;
++ tio.c_cc[VTIME] = 10;
++
++ cfsetospeed(&tio, speed);
++ cfsetispeed(&tio, speed);
++
++ rc = tcsetattr(fd, TCSANOW, &tio);
++ if (rc)
++ goto out;
++
++ rc = fd;
++out:
++ if (rc < 0) {
++ if (fd >= 0)
++ close(fd);
++ }
++
++ return rc;
++}
++
++static int
++kwboot_bootmsg(int tty, void *msg)
++{
++ int rc;
++ char c;
++
++ kwboot_printv("Sending boot message. Please reboot the target...");
++
++ do {
++ rc = tcflush(tty, TCIOFLUSH);
++ if (rc)
++ break;
++
++ rc = kwboot_tty_send(tty, msg, 8);
++ if (rc) {
++ usleep(KWBOOT_MSG_REQ_DELAY * 1000);
++ continue;
++ }
++
++ rc = kwboot_tty_recv(tty, &c, 1, KWBOOT_MSG_RSP_TIMEO);
++
++ kwboot_spinner();
++
++ } while (rc || c != NAK);
++
++ kwboot_printv("\n");
++
++ return rc;
++}
++
++static int
++kwboot_xm_makeblock(struct kwboot_block *block, const void *data,
++ size_t size, int pnum)
++{
++ const size_t blksz = sizeof(block->data);
++ size_t n;
++ int i;
++
++ block->pnum = pnum;
++ block->_pnum = ~block->pnum;
++
++ n = size < blksz ? size : blksz;
++ memcpy(&block->data[0], data, n);
++ memset(&block->data[n], 0, blksz - n);
++
++ block->csum = 0;
++ for (i = 0; i < n; i++)
++ block->csum += block->data[i];
++
++ return n;
++}
++
++static int
++kwboot_xm_sendblock(int fd, struct kwboot_block *block)
++{
++ int rc, retries;
++ char c;
++
++ retries = 16;
++ do {
++ rc = kwboot_tty_send(fd, block, sizeof(*block));
++ if (rc)
++ break;
++
++ rc = kwboot_tty_recv(fd, &c, 1, KWBOOT_BLK_RSP_TIMEO);
++ if (rc)
++ break;
++
++ if (c != ACK)
++ kwboot_progress(-1, '+');
++
++ } while (c == NAK && retries-- > 0);
++
++ rc = -1;
++
++ switch (c) {
++ case ACK:
++ rc = 0;
++ break;
++ case NAK:
++ errno = EBADMSG;
++ break;
++ case CAN:
++ errno = ECANCELED;
++ break;
++ default:
++ errno = EPROTO;
++ break;
++ }
++
++ return rc;
++}
++
++static int
++kwboot_xmodem(int tty, const void *_data, size_t size)
++{
++ const uint8_t *data = _data;
++ int rc, pnum, N, err;
++
++ pnum = 1;
++ N = 0;
++
++ kwboot_printv("Sending boot image...\n");
++
++ do {
++ struct kwboot_block block;
++ int n;
++
++ n = kwboot_xm_makeblock(&block,
++ data + N, size - N,
++ pnum++);
++ if (n < 0)
++ goto can;
++
++ if (!n)
++ break;
++
++ rc = kwboot_xm_sendblock(tty, &block);
++ if (rc)
++ goto out;
++
++ N += n;
++ kwboot_progress(N * 100 / size, '.');
++ } while (1);
++
++ rc = kwboot_tty_send_char(tty, EOT);
++
++out:
++ return rc;
++
++can:
++ err = errno;
++ kwboot_tty_send_char(tty, CAN);
++ errno = err;
++ goto out;
++}
++
++static int
++kwboot_term_pipe(int in, int out, char *quit, int *s)
++{
++ ssize_t nin, nout;
++ char _buf[128], *buf = _buf;
++
++ nin = read(in, buf, sizeof(buf));
++ if (nin < 0)
++ return -1;
++
++ if (quit) {
++ int i;
++
++ for (i = 0; i < nin; i++) {
++ if (*buf == quit[*s]) {
++ (*s)++;
++ if (!quit[*s])
++ return 0;
++ buf++;
++ nin--;
++ } else
++ while (*s > 0) {
++ nout = write(out, quit, *s);
++ if (nout <= 0)
++ return -1;
++ (*s) -= nout;
++ }
++ }
++ }
++
++ while (nin > 0) {
++ nout = write(out, buf, nin);
++ if (nout <= 0)
++ return -1;
++ nin -= nout;
++ }
++
++ return 0;
++}
++
++static int
++kwboot_terminal(int tty)
++{
++ int rc, in, s;
++ char *quit = "\34c";
++ struct termios otio, tio;
++
++ rc = -1;
++
++ in = STDIN_FILENO;
++ if (isatty(in)) {
++ rc = tcgetattr(in, &otio);
++ if (!rc) {
++ tio = otio;
++ cfmakeraw(&tio);
++ rc = tcsetattr(in, TCSANOW, &tio);
++ }
++ if (rc) {
++ perror("tcsetattr");
++ goto out;
++ }
++
++ kwboot_printv("[Type Ctrl-%c + %c to quit]\r\n",
++ quit[0]|0100, quit[1]);
++ } else
++ in = -1;
++
++ rc = 0;
++ s = 0;
++
++ do {
++ fd_set rfds;
++ int nfds = 0;
++
++ FD_SET(tty, &rfds);
++ nfds = nfds < tty ? tty : nfds;
++
++ if (in >= 0) {
++ FD_SET(in, &rfds);
++ nfds = nfds < in ? in : nfds;
++ }
++
++ nfds = select(nfds + 1, &rfds, NULL, NULL, NULL);
++ if (nfds < 0)
++ break;
++
++ if (FD_ISSET(tty, &rfds)) {
++ rc = kwboot_term_pipe(tty, STDOUT_FILENO, NULL, NULL);
++ if (rc)
++ break;
++ }
++
++ if (FD_ISSET(in, &rfds)) {
++ rc = kwboot_term_pipe(in, tty, quit, &s);
++ if (rc)
++ break;
++ }
++ } while (quit[s] != 0);
++
++ tcsetattr(in, TCSANOW, &otio);
++out:
++ return rc;
++}
++
++static void *
++kwboot_mmap_image(const char *path, size_t *size, int prot)
++{
++ int rc, fd, flags;
++ struct stat st;
++ void *img;
++
++ rc = -1;
++ fd = -1;
++ img = NULL;
++
++ fd = open(path, O_RDONLY);
++ if (fd < 0)
++ goto out;
++
++ rc = fstat(fd, &st);
++ if (rc)
++ goto out;
++
++ flags = (prot & PROT_WRITE) ? MAP_PRIVATE : MAP_SHARED;
++
++ img = mmap(NULL, st.st_size, prot, flags, fd, 0);
++ if (img == MAP_FAILED) {
++ img = NULL;
++ goto out;
++ }
++
++ rc = 0;
++ *size = st.st_size;
++out:
++ if (rc && img) {
++ munmap(img, st.st_size);
++ img = NULL;
++ }
++ if (fd >= 0)
++ close(fd);
++
++ return img;
++}
++
++static uint8_t
++kwboot_img_csum8(void *_data, size_t size)
++{
++ uint8_t *data = _data, csum;
++
++ for (csum = 0; size-- > 0; data++)
++ csum += *data;
++
++ return csum;
++}
++
++static int
++kwboot_img_patch_hdr(void *img, size_t size)
++{
++ int rc;
++ bhr_t *hdr;
++ uint8_t csum;
++ const size_t hdrsz = sizeof(*hdr);
++
++ rc = -1;
++ hdr = img;
++
++ if (size < hdrsz) {
++ errno = EINVAL;
++ goto out;
++ }
++
++ csum = kwboot_img_csum8(hdr, hdrsz) - hdr->checkSum;
++ if (csum != hdr->checkSum) {
++ errno = EINVAL;
++ goto out;
++ }
++
++ if (hdr->blockid == IBR_HDR_UART_ID) {
++ rc = 0;
++ goto out;
++ }
++
++ hdr->blockid = IBR_HDR_UART_ID;
++
++ hdr->nandeccmode = IBR_HDR_ECC_DISABLED;
++ hdr->nandpagesize = 0;
++
++ hdr->srcaddr = hdr->ext
++ ? sizeof(struct kwb_header)
++ : sizeof(*hdr);
++
++ hdr->checkSum = kwboot_img_csum8(hdr, hdrsz) - csum;
++
++ rc = 0;
++out:
++ return rc;
++}
++
++static void
++kwboot_usage(FILE *stream, char *progname)
++{
++ fprintf(stream,
++ "Usage: %s -b <image> [ -p ] [ -t ] "
++ "[-B <baud> ] <TTY>\n", progname);
++ fprintf(stream, "\n");
++ fprintf(stream, " -b <image>: boot <image>\n");
++ fprintf(stream, " -p: patch <image> to type 0x69 (uart boot)\n");
++ fprintf(stream, "\n");
++ fprintf(stream, " -t: mini terminal\n");
++ fprintf(stream, "\n");
++ fprintf(stream, " -B <baud>: set baud rate\n");
++ fprintf(stream, "\n");
++}
++
++int
++main(int argc, char **argv)
++{
++ const char *ttypath, *imgpath;
++ int rv, rc, tty, term, prot, patch;
++ void *bootmsg;
++ void *img;
++ size_t size;
++ speed_t speed;
++
++ rv = 1;
++ tty = -1;
++ bootmsg = NULL;
++ imgpath = NULL;
++ img = NULL;
++ term = 0;
++ patch = 0;
++ size = 0;
++ speed = B115200;
++
++ kwboot_verbose = isatty(STDOUT_FILENO);
++
++ do {
++ int c = getopt(argc, argv, "hb:ptB:");
++ if (c < 0)
++ break;
++
++ switch (c) {
++ case 'b':
++ bootmsg = kwboot_msg_boot;
++ imgpath = optarg;
++ break;
++
++ case 'p':
++ patch = 1;
++ break;
++
++ case 't':
++ term = 1;
++ break;
++
++ case 'B':
++ speed = kwboot_tty_speed(atoi(optarg));
++ if (speed == -1)
++ goto usage;
++ break;
++
++ case 'h':
++ rv = 0;
++ default:
++ goto usage;
++ }
++ } while (1);
++
++ if (!bootmsg && !term)
++ goto usage;
++
++ if (patch && !imgpath)
++ goto usage;
++
++ if (argc - optind < 1)
++ goto usage;
++
++ ttypath = argv[optind++];
++
++ tty = kwboot_open_tty(ttypath, speed);
++ if (tty < 0) {
++ perror(ttypath);
++ goto out;
++ }
++
++ if (imgpath) {
++ prot = PROT_READ | (patch ? PROT_WRITE : 0);
++
++ img = kwboot_mmap_image(imgpath, &size, prot);
++ if (!img) {
++ perror(imgpath);
++ goto out;
++ }
++ }
++
++ if (patch) {
++ rc = kwboot_img_patch_hdr(img, size);
++ if (rc) {
++ fprintf(stderr, "%s: Invalid image.\n", imgpath);
++ goto out;
++ }
++ }
++
++ if (bootmsg) {
++ rc = kwboot_bootmsg(tty, bootmsg);
++ if (rc) {
++ perror("bootmsg");
++ goto out;
++ }
++ }
++
++ if (img) {
++ rc = kwboot_xmodem(tty, img, size);
++ if (rc) {
++ perror("xmodem");
++ goto out;
++ }
++ }
++
++ if (term) {
++ rc = kwboot_terminal(tty);
++ if (rc && !(errno == EINTR)) {
++ perror("terminal");
++ goto out;
++ }
++ }
++
++ rv = 0;
++out:
++ if (tty >= 0)
++ close(tty);
++
++ if (img)
++ munmap(img, size);
++
++ return rv;
++
++usage:
++ kwboot_usage(rv ? stderr : stdout, basename(argv[0]));
++ goto out;
++}
diff --git a/package/boot/uboot-kirkwood/patches/0003-ide_bus.patch b/package/boot/uboot-kirkwood/patches/0003-ide_bus.patch
new file mode 100644
index 000000000..c94d63da9
--- /dev/null
+++ b/package/boot/uboot-kirkwood/patches/0003-ide_bus.patch
@@ -0,0 +1,17 @@
+http://lists.denx.de/pipermail/u-boot/2012-April/122594.html
+http://patchwork.ozlabs.org/patch/159129/
+---
+
+diff --git a/include/ide.h b/include/ide.h
+index 8ecc9dd..385e909 100644
+--- a/include/ide.h
++++ b/include/ide.h
+@@ -24,7 +24,7 @@
+ #ifndef _IDE_H
+ #define _IDE_H
+
+-#define IDE_BUS(dev) (dev >> 1)
++#define IDE_BUS(dev) (dev / (CONFIG_SYS_IDE_MAXDEVICE / CONFIG_SYS_IDE_MAXBUS))
+
+ #define ATA_CURR_BASE(dev) (CONFIG_SYS_ATA_BASE_ADDR+ide_bus_offset[IDE_BUS(dev)])
+
diff --git a/package/boot/uboot-kirkwood/patches/100-iconnect.patch b/package/boot/uboot-kirkwood/patches/100-iconnect.patch
new file mode 100644
index 000000000..d2f35ad5a
--- /dev/null
+++ b/package/boot/uboot-kirkwood/patches/100-iconnect.patch
@@ -0,0 +1,10 @@
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -137,6 +137,7 @@ hawkboard_uart arm
+ enbw_cmc arm arm926ejs enbw_cmc enbw davinci
+ calimain arm arm926ejs calimain omicron davinci
+ dns325 arm arm926ejs - d-link kirkwood
++iconnect arm arm926ejs - iomega kirkwood
+ km_kirkwood arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_DISABLE_PCI
+ km_kirkwood_pci arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_RECONFIG_XLX
+ mgcoge3un arm arm926ejs km_arm keymile kirkwood
diff --git a/package/boot/uboot-kirkwood/patches/110-dockstar.patch b/package/boot/uboot-kirkwood/patches/110-dockstar.patch
new file mode 100644
index 000000000..4ff7e57bb
--- /dev/null
+++ b/package/boot/uboot-kirkwood/patches/110-dockstar.patch
@@ -0,0 +1,35 @@
+--- a/include/configs/dockstar.h
++++ b/include/configs/dockstar.h
+@@ -83,22 +83,19 @@
+ * Default environment variables
+ */
+ #define CONFIG_BOOTCOMMAND \
+- "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
+- "ubi part root; " \
+- "ubifsmount root; " \
+- "ubifsload 0x800000 ${kernel}; " \
+- "ubifsload 0x1100000 ${initrd}; " \
+- "bootm 0x800000 0x1100000"
++ "${x_bootcmd_kernel}; " \
++ "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
++ "${x_bootcmd_usb}; bootm 0x6400000;"
+
+-#define CONFIG_MTDPARTS "mtdparts=orion_nand:1m(uboot),-(root)\0"
++#define CONFIG_MTDPARTS \
++ "orion_nand:1M(u-boot),1M@1M(second_stage_u-boot)," \
++ "3M@2M(kernel),32M@5M(rootfs),219M@37M(data) rw\0"
+
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+- "console=console=ttyS0,115200\0" \
+- "mtdids=nand0=orion_nand\0" \
+- "mtdparts="CONFIG_MTDPARTS \
+- "kernel=/boot/uImage\0" \
+- "initrd=/boot/uInitrd\0" \
+- "bootargs_root=ubi.mtd=1 root=ubi0:root rootfstype=ubifs ro\0"
++ "x_bootargs=console=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \
++ "x_bootcmd_kernel=nand read 0x6400000 0x200000 0x300000\0" \
++ "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0" \
++ "x_bootcmd_usb=usb start\0"
+
+ /*
+ * Ethernet Driver configuration