8 files changed, 0 insertions, 979 deletions
diff --git a/package/base-files/files/etc/hotplug.d/iface/00-netstate b/package/base-files/files/etc/hotplug.d/iface/00-netstate
deleted file mode 100644
index 37b1e934e..000000000
--- a/package/base-files/files/etc/hotplug.d/iface/00-netstate
+++ /dev/null
@@ -1,5 +0,0 @@
-[ ifup = "$ACTION" ] && {
-	uci_toggle_state network "$INTERFACE" up 1 
-	uci_toggle_state network "$INTERFACE" connect_time $(sed -ne 's![^0-9].*$!!p' /proc/uptime)
-	[ -n "$DEVICE" ] && uci_toggle_state network "$INTERFACE" ifname "$DEVICE"
-}
diff --git a/package/base-files/files/etc/hotplug.d/iface/10-routes b/package/base-files/files/etc/hotplug.d/iface/10-routes
deleted file mode 100644
index d57a5b3c7..000000000
--- a/package/base-files/files/etc/hotplug.d/iface/10-routes
+++ /dev/null
@@ -1,137 +0,0 @@
-add_route() {
-	local config="$1"
-
-	# is this route intended for the
-	# $INTERFACE of this hotplug event
-	config_get interface "$config" interface
-	[ "$interface" != "$INTERFACE" ] && return 0
-	
-	# get the real interface name from network config
-	config_get dev "$interface" ifname
-
-	config_get target "$config" target
-	config_get netmask "$config" netmask
-	config_get gateway "$config" gateway
-	config_get metric "$config" metric
-	config_get mtu "$config" mtu
-
-	# make sure there is a gateway and a target
-	[ -n "$target" ] || {
-		echo "Missing target in route section $config"
-		return 1
-	}
-	[ -n "$gateway" ] || {
-		config_get gateway "$interface" gateway
-	}
-
-	# handle "0.0.0.0" as "no gateway given" to allow
-	# defining gateway-less routes while still keeping
-	# the possibility to have static routes with a
-	# proper gateway on interfaces with dynamic ips 
-	[ "$gateway" = "0.0.0.0" ] && gateway=""
-
-	dest="${netmask:+-net "$target" netmask "$netmask"}"
-	dest="${dest:--host "$target"}"
-	
-	/sbin/route add $dest ${gateway:+gw "$gateway"} \
-		${dev:+dev "$dev"} ${metric:+ metric "$metric"} \
-		${mtu:+mss "$mtu"}
-}
-
-add_route6() {
-	local config="$1"
-
-	# is this route intended for the
-	# $INTERFACE of this hotplug event
-	config_get interface "$config" interface
-	[ "$interface" != "$INTERFACE" ] && return 0
-	
-	# get the real interface name from network config
-	config_get dev "$interface" ifname
-
-	config_get target "$config" target
-	config_get gateway "$config" gateway
-	config_get metric "$config" metric
-	config_get mtu "$config" mtu
-
-	# make sure there is a gateway and a target
-	[ -n "$target" ] || {
-		echo "Missing target in route section $config"
-		return 1
-	}
-	[ -n "$gateway" ] || {
-		config_get gateway "$interface" gateway
-	}
-
-	/sbin/route -A inet6 add $target ${gateway:+gw "$gateway"} \
-		${dev:+dev "$dev"} ${metric:+ metric "$metric"} \
-		${mtu:+mss "$mtu"}
-}
-
-# Skip fake devices (e.g. relayd)
-grep -qs "^ *$DEVICE:" /proc/net/dev || exit 0
-
-case "$ACTION" in
-	ifup)
-		include /lib/network
-		scan_interfaces
-
-		# Setup aliases
-		config_set "$INTERFACE" aliases ""
-		config_set "$INTERFACE" alias_count 0
-		config_foreach setup_interface_alias alias "$INTERFACE" "$DEVICE"
-
-		# Save alias references in state vars
-		local aliases
-		config_get aliases "$INTERFACE" aliases
-		[ -z "$aliases" ] || uci_toggle_state network "$INTERFACE" aliases "$aliases"
-
-		# Make ip6addr of parent iface the main address again
-		local ip6addr
-		config_get ip6addr "$INTERFACE" ip6addr
-		[ -z "$ip6addr" ] || {
-			ifconfig "$DEVICE" del "$ip6addr"
-			ifconfig "$DEVICE" add "$ip6addr"
-		}
-		
-		# Setup sysctls
-		local proto accept_ra send_rs
-		
-		config_get proto "$INTERFACE" proto
-		if [ "$proto" = dhcp ]; then
-			accept_ra=1
-			send_rs=0
-		else
-			accept_ra=0
-			send_rs=1
-		fi
-
-		config_get_bool accept_ra "$INTERFACE" accept_ra $accept_ra
-		[ $accept_ra -eq 0 ] || {
-			logger -t ifup "Allowing Router Advertisements on $INTERFACE ($DEVICE)"
-			accept_ra=2
-		}
-		do_sysctl "net.ipv6.conf.$DEVICE.accept_ra" $accept_ra
-
-		config_get_bool send_rs "$INTERFACE" send_rs $send_rs
-		[ $send_rs -eq 0 ] || {
-			logger -t ifup "Enabling Router Solicitations on $INTERFACE ($DEVICE)"
-			send_rs=2
-		}
-		do_sysctl "net.ipv6.conf.$DEVICE.forwarding" $send_rs
-
-
-		# Setup routes
-		config_foreach "add_route" route
-		config_foreach "add_route6" route6
-	;;
-	ifdown)
-		# Bring down named aliases
-		local device=$(uci_get_state network "$INTERFACE" device)
-		local ifn
-		for ifn in $(ifconfig | sed -ne "s/^\(\($DEVICE${device:+\|$device}\|br-$INTERFACE\):[^[:space:]]\+\).*/\1/p"); do
-			ifconfig "$ifn" down
-		done
-	;;
-esac
-
diff --git a/package/base-files/files/etc/hotplug.d/net/10-net b/package/base-files/files/etc/hotplug.d/net/10-net
deleted file mode 100644
index 013ece39c..000000000
--- a/package/base-files/files/etc/hotplug.d/net/10-net
+++ /dev/null
@@ -1,72 +0,0 @@
-# Copyright (C) 2006 OpenWrt.org
-
-include /lib/network
-
-addif() {
-	# Ensure that ipv6 is loaded, autoloading happens later but ipv6 might be
-	# required now for interface setup.
-	[ -d /proc/sys/net/ipv6 ] || {
-		grep -q '^ipv6' /etc/modules.d/* && insmod ipv6
-	}
-
-	# PPP devices are configured by pppd, no need to run setup_interface here
-	case "$INTERFACE" in
-		3g-*|ppp-*|pppoa-*|pppoe-*|pptp-*) return 0;;
-	esac
-
-	scan_interfaces
-	local cfg="$(find_config "$INTERFACE")"
-
-	case "$INTERFACE" in
-		# Skip wireless parent interfaces
-		ath[0-9]|wlan[0-9]) ;;
-		*)
-			# check the autoload setting
-			config_get auto "$cfg" auto
-			case "$auto" in
-				1|on|enabled) setup_interface "$INTERFACE";;
-			esac
-		;;
-	esac
-
-	# find all vlan configurations for this interface and set them up as well
-	for ifc in $interfaces; do
-		config_get iftype "$ifc" type
-		config_get ifs "$ifc" device
-		for dev in $ifs; do
-			[ "${dev%%\.*}" = "$INTERFACE" -a "$dev" != "$INTERFACE" ] && {
-				add_vlan "$dev"
-			}
-		done
-	done
-}
-
-
-delif() {
-	scan_interfaces
-
-	# find all vlan configurations for this interface and nuke 'em
-	for ifc in $interfaces; do
-		config_get iftype "$ifc" type
-		config_get ifs "$ifc" device
-		confdevs="$(uci_get network.$ifc.ifname)"
-		for dev in $ifs; do
-			[ "${dev%%\.*}" = "$INTERFACE" ] && {
-				list_contains confdevs "$dev" || list_remove ifs "$dev"
-			}
-		done
-		uci_set_state "network" "$ifc" device "$ifs"
-	done
-}
-
-case "$ACTION" in
-	add|register)
-		case "$PHYSDEVDRIVER" in
-			natsemi) sleep 1;;
-		esac
-		addif
-	;;
-	remove|unregister)
-		delif
-	;;
-esac
diff --git a/package/base-files/files/etc/init.d/network b/package/base-files/files/etc/init.d/network
deleted file mode 100755
index fc512216f..000000000
--- a/package/base-files/files/etc/init.d/network
+++ /dev/null
@@ -1,52 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2006-2011 OpenWrt.org
-
-START=40
-STOP=90
-
-boot() {
-	setup_switch() { return 0; }
-
-	include /lib/network
-	setup_switch
-
-	/sbin/wifi detect > /tmp/wireless.tmp
-	[ -s /tmp/wireless.tmp ] && {
-		cat /tmp/wireless.tmp >> /etc/config/wireless
-	}
-	rm -f /tmp/wireless.tmp
-	grep -qs config /etc/config/wireless && {
-		/sbin/wifi up
-	}
-
-	scan_interfaces
-
-	local ifc
-	for ifc in $interfaces; do
-		local proto
-		config_get proto "$ifc" proto
-
-		local auto
-		config_get_bool auto "$ifc" auto 1
-
-		type "coldplug_interface_$proto" >/dev/null && [ "$auto" = 1 ] && \
-			coldplug_interface_$proto "$ifc"
-	done
-}
-
-start() {
-	setup_switch() { return 0; }
-	
-	include /lib/network
-	setup_switch
-	ifup -a
-	/sbin/wifi up
-}
-
-stop() {
-	ifdown -a
-}
-
-restart() {
-	start
-}
diff --git a/package/base-files/files/lib/network/config.sh b/package/base-files/files/lib/network/config.sh
deleted file mode 100755
index 29d021af9..000000000
--- a/package/base-files/files/lib/network/config.sh
+++ /dev/null
@@ -1,444 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-
-# DEBUG="echo"
-
-do_sysctl() {
-	[ -n "$2" ] && \
-		sysctl -n -e -w "$1=$2" >/dev/null || \
-		sysctl -n -e "$1"
-}
-
-map_sysctls() {
-	local cfg="$1"
-	local ifn="$2"
-
-	local fam
-	for fam in ipv4 ipv6; do
-		if [ -d /proc/sys/net/$fam ]; then
-			local key
-			for key in /proc/sys/net/$fam/*/$ifn/*; do
-				local val
-				config_get val "$cfg" "${fam}_${key##*/}"
-				[ -n "$val" ] && echo -n "$val" > "$key"
-			done
-		fi
-	done
-}
-
-find_config() {
-	local iftype device iface ifaces ifn
-	for ifn in $interfaces; do
-		config_get iftype "$ifn" type
-		config_get iface "$ifn" ifname
-		case "$iftype" in
-			bridge) config_get ifaces "$ifn" ifnames;;
-		esac
-		config_get device "$ifn" device
-		for ifc in $device $iface $ifaces; do
-			[ ."$ifc" = ."$1" ] && {
-				echo "$ifn"
-				return 0
-			}
-		done
-	done
-
-	return 1;
-}
-
-scan_interfaces() {
-	local cfgfile="${1:-network}"
-	interfaces=
-	config_cb() {
-		case "$1" in
-			interface)
-				config_set "$2" auto 1
-			;;
-		esac
-		local iftype ifname device proto
-		config_get iftype "$CONFIG_SECTION" TYPE
-		case "$iftype" in
-			interface)
-				append interfaces "$CONFIG_SECTION"
-				config_get proto "$CONFIG_SECTION" proto
-				config_get iftype "$CONFIG_SECTION" type
-				config_get ifname "$CONFIG_SECTION" ifname
-				config_get device "$CONFIG_SECTION" device "$ifname"
-				config_set "$CONFIG_SECTION" device "$device"
-				case "$iftype" in
-					bridge)
-						config_set "$CONFIG_SECTION" ifnames "$device"
-						config_set "$CONFIG_SECTION" ifname br-"$CONFIG_SECTION"
-					;;
-				esac
-				( type "scan_$proto" ) >/dev/null 2>/dev/null && eval "scan_$proto '$CONFIG_SECTION'"
-			;;
-		esac
-	}
-	config_load "${cfgfile}"
-}
-
-add_vlan() {
-	local vif="${1%\.*}"
-
-	[ "$1" = "$vif" ] || ifconfig "$1" >/dev/null 2>/dev/null || {
-		ifconfig "$vif" up 2>/dev/null >/dev/null || add_vlan "$vif"
-		$DEBUG vconfig add "$vif" "${1##*\.}"
-		return 0
-	}
-	return 1
-}
-
-# add dns entries if they are not in resolv.conf yet
-add_dns() {
-	local cfg="$1"; shift
-
-	remove_dns "$cfg"
-
-	# We may be called by pppd's ip-up which has a nonstandard umask set.
-	# Create an empty file here and force its permission to 0644, otherwise
-	# dnsmasq will not be able to re-read the resolv.conf.auto .
-	[ ! -f /tmp/resolv.conf.auto ] && {
-		touch /tmp/resolv.conf.auto
-		chmod 0644 /tmp/resolv.conf.auto
-	}
-
-	local dns
-	local add
-	for dns in "$@"; do
-		grep -qsE "^nameserver ${dns//./\\.}$" /tmp/resolv.conf.auto || {
-			add="${add:+$add }$dns"
-			echo "nameserver $dns" >> /tmp/resolv.conf.auto
-		}
-	done
-
-	[ -n "$cfg" ] && {
-		uci_toggle_state network "$cfg" dns "$add"
-		uci_toggle_state network "$cfg" resolv_dns "$add"
-	}
-}
-
-# remove dns entries of the given iface
-remove_dns() {
-	local cfg="$1"
-
-	[ -n "$cfg" ] && {
-		[ -f /tmp/resolv.conf.auto ] && {
-			local dns=$(uci_get_state network "$cfg" resolv_dns)
-			for dns in $dns; do
-				sed -i -e "/^nameserver ${dns//./\\.}$/d" /tmp/resolv.conf.auto
-			done
-		}
-
-		uci_revert_state network "$cfg" dns
-		uci_revert_state network "$cfg" resolv_dns
-	}
-}
-
-# sort the device list, drop duplicates
-sort_list() {
-	local arg="$*"
-	(
-		for item in $arg; do
-			echo "$item"
-		done
-	) | sort -u
-}
-
-# Create the interface, if necessary.
-# Return status 0 indicates that the setup_interface() call should continue
-# Return status 1 means that everything is set up already.
-
-prepare_interface() {
-	local iface="$1"
-	local config="$2"
-	local macaddr="$3"
-
-	# if we're called for the bridge interface itself, don't bother trying
-	# to create any interfaces here. The scripts have already done that, otherwise
-	# the bridge interface wouldn't exist.
-	[ "br-$config" = "$iface" -o -e "$iface" ] && return 0;
-
-	ifconfig "$iface" 2>/dev/null >/dev/null && {
-		local proto
-		config_get proto "$config" proto
-
-		# make sure the interface is removed from any existing bridge and deconfigured,
-		# (deconfigured only if the interface is not set to proto=none)
-		unbridge "$iface"
-
-		local mtu macaddr txqueuelen
-		config_get mtu "$config" mtu
-		[ -n "$macaddr" ] || config_get macaddr "$config" macaddr
-		config_get txqueuelen "$config" txqueuelen
-		[ -n "$macaddr" ] && $DEBUG ifconfig "$iface" down
-		$DEBUG ifconfig "$iface" ${macaddr:+hw ether "$macaddr"} ${mtu:+mtu $mtu} ${txqueuelen:+txqueuelen $txqueuelen} up
-
-		[ "$proto" = none ] || ifconfig "$iface" 0.0.0.0
-
-		# Apply sysctl settings
-		map_sysctls "$config" "$iface"
-	}
-
-	# Setup VLAN interfaces
-	add_vlan "$iface" && return 1
-	ifconfig "$iface" 2>/dev/null >/dev/null || return 0
-
-	# Setup bridging
-	local iftype
-	config_get iftype "$config" type
-	case "$iftype" in
-		bridge)
-			local macaddr
-			config_get macaddr "$config" macaddr
-			[ -x /usr/sbin/brctl ] && {
-				ifconfig "br-$config" 2>/dev/null >/dev/null && {
-					local newdevs devices
-					config_get devices "$config" device
-					for dev in $(sort_list "$devices" "$iface"); do
-						append newdevs "$dev"
-					done
-					uci_toggle_state network "$config" device "$newdevs"
-					$DEBUG ifconfig "$iface" 0.0.0.0
-					$DEBUG do_sysctl "net.ipv6.conf.$iface.disable_ipv6" 1
-					$DEBUG brctl addif "br-$config" "$iface"
-					# Bridge existed already. No further processing necesary
-				} || {
-					local stp igmp_snooping
-					config_get_bool stp "$config" stp 0
-					config_get_bool igmp_snooping "$config" igmp_snooping 1
-					$DEBUG brctl addbr "br-$config"
-					$DEBUG brctl setfd "br-$config" 0
-					$DEBUG ifconfig "$iface" 0.0.0.0
-					$DEBUG do_sysctl "net.ipv6.conf.$iface.disable_ipv6" 1
-					$DEBUG brctl addif "br-$config" "$iface"
-					$DEBUG brctl stp "br-$config" $stp
-					[ -z "$macaddr" ] && macaddr="$(cat /sys/class/net/$iface/address)"
-					echo $igmp_snooping > /sys/devices/virtual/net/br-$config/bridge/multicast_snooping 2>/dev/null
-					$DEBUG ifconfig "br-$config" hw ether $macaddr up
-					# Creating the bridge here will have triggered a hotplug event, which will
-					# result in another setup_interface() call, so we simply stop processing
-					# the current event at this point.
-				}
-				ifconfig "$iface" ${macaddr:+hw ether "${macaddr}"} up 2>/dev/null >/dev/null
-				return 1
-			}
-		;;
-	esac
-	return 0
-}
-
-set_interface_ifname() {
-	local config="$1"
-	local ifname="$2"
-
-	local device
-	config_get device "$1" device
-	uci_toggle_state network "$config" ifname "$ifname"
-	uci_toggle_state network "$config" device "$device"
-}
-
-setup_interface_none() {
-	env -i ACTION="ifup" INTERFACE="$2" DEVICE="$1" PROTO=none /sbin/hotplug-call "iface" &
-}
-
-setup_interface_static() {
-	local iface="$1"
-	local config="$2"
-
-	local ipaddr netmask ip6addr
-	config_get ipaddr "$config" ipaddr
-	config_get netmask "$config" netmask
-	config_get ip6addr "$config" ip6addr
-	[ -z "$ipaddr" -o -z "$netmask" ] && [ -z "$ip6addr" ] && return 1
-
-	local gateway ip6gw dns bcast metric
-	config_get gateway "$config" gateway
-	config_get ip6gw "$config" ip6gw
-	config_get dns "$config" dns
-	config_get bcast "$config" broadcast
-	config_get metric "$config" metric
-
-	case "$ip6addr" in
-		*/*) ;;
-		*:*) ip6addr="$ip6addr/64" ;;
-	esac
-
-	[ -z "$ipaddr" ] || $DEBUG ifconfig "$iface" "$ipaddr" netmask "$netmask" broadcast "${bcast:-+}"
-	[ -z "$ip6addr" ] || $DEBUG ifconfig "${iface%:*}" add "$ip6addr"
-	[ -z "$gateway" ] || $DEBUG route add default gw "$gateway" ${metric:+metric $metric} dev "$iface"
-	[ -z "$ip6gw" ] || $DEBUG route -A inet6 add default gw "$ip6gw" ${metric:+metric $metric} dev "${iface%:*}"
-	[ -z "$dns" ] || add_dns "$config" $dns
-
-	config_get type "$config" TYPE
-	[ "$type" = "alias" ] && return 0
-
-	env -i ACTION="ifup" INTERFACE="$config" DEVICE="$iface" PROTO=static /sbin/hotplug-call "iface" &
-}
-
-setup_interface_alias() {
-	local config="$1"
-	local parent="$2"
-	local iface="$3"
-
-	local cfg
-	config_get cfg "$config" interface
-	[ "$parent" == "$cfg" ] || return 0
-
-	# parent device and ifname
-	local p_device p_type
-	config_get p_device "$cfg" device
-	config_get p_type   "$cfg" type
-
-	# select alias ifname
-	local layer use_iface
-	config_get layer "$config" layer 2
-	case "$layer:$p_type" in
-		# layer 3: e.g. pppoe-wan or pptp-vpn
-		3:*)      use_iface="$iface" ;;
-
-		# layer 2 and parent is bridge: e.g. br-wan
-		2:bridge) use_iface="br-$cfg" ;;
-
-		# layer 1: e.g. eth0 or ath0
-		*)        use_iface="$p_device" ;;
-	esac
-
-	# alias counter
-	local ctr
-	config_get ctr "$parent" alias_count 0
-	ctr="$(($ctr + 1))"
-	config_set "$parent" alias_count "$ctr"
-
-	# alias list
-	local list
-	config_get list "$parent" aliases
-	append list "$config"
-	config_set "$parent" aliases "$list"
-
-	use_iface="$use_iface:$ctr"
-	set_interface_ifname "$config" "$use_iface"
-
-	local proto
-	config_get proto "$config" proto "static"
-	case "${proto}" in
-		static)
-			setup_interface_static "$use_iface" "$config"
-		;;
-		*)
-			echo "Unsupported type '$proto' for alias config '$config'"
-			return 1
-		;;
-	esac
-}
-
-setup_interface() {
-	local iface="$1"
-	local config="$2"
-	local proto="$3"
-	local vifmac="$4"
-
-	[ -n "$config" ] || {
-		config=$(find_config "$iface")
-		[ "$?" = 0 ] || return 1
-	}
-
-	prepare_interface "$iface" "$config" "$vifmac" || return 0
-
-	[ "$iface" = "br-$config" ] && {
-		# need to bring up the bridge and wait a second for
-		# it to switch to the 'forwarding' state, otherwise
-		# it will lose its routes...
-		ifconfig "$iface" up
-		sleep 1
-	}
-
-	# Interface settings
-	set_interface_ifname "$config" "$iface"
-
-	[ -n "$proto" ] || config_get proto "$config" proto
-	case "$proto" in
-		static)
-			setup_interface_static "$iface" "$config"
-		;;
-		dhcp)
-			# kill running udhcpc instance
-			local pidfile="/var/run/dhcp-${iface}.pid"
-			service_kill udhcpc "$pidfile"
-
-			local ipaddr netmask hostname proto1 clientid vendorid broadcast reqopts
-			config_get ipaddr "$config" ipaddr
-			config_get netmask "$config" netmask
-			config_get hostname "$config" hostname
-			config_get proto1 "$config" proto
-			config_get clientid "$config" clientid
-			config_get vendorid "$config" vendorid
-			config_get_bool broadcast "$config" broadcast 0
-			config_get reqopts "$config" reqopts
-
-			[ -z "$ipaddr" ] || \
-				$DEBUG ifconfig "$iface" "$ipaddr" ${netmask:+netmask "$netmask"}
-
-			# additional request options
-			local opt dhcpopts
-			for opt in $reqopts; do
-				append dhcpopts "-O $opt"
-			done
-
-			# don't stay running in background if dhcp is not the main proto on the interface (e.g. when using pptp)
-			[ "$proto1" != "$proto" ] && append dhcpopts "-n -q" || append dhcpopts "-O rootpath -R &"
-			[ "$broadcast" = 1 ] && broadcast="-O broadcast" || broadcast=
-
-			$DEBUG eval udhcpc -t 0 -i "$iface" \
-				${ipaddr:+-r $ipaddr} \
-				${hostname:+-H $hostname} \
-				${clientid:+-c $clientid} \
-				${vendorid:+-V $vendorid} \
-				-b -p "$pidfile" $broadcast \
-				${dhcpopts}
-		;;
-		none)
-			setup_interface_none "$iface" "$config"
-		;;
-		*)
-			if ( eval "type setup_interface_$proto" ) >/dev/null 2>/dev/null; then
-				eval "setup_interface_$proto '$iface' '$config' '$proto'"
-			else
-				echo "Interface type $proto not supported."
-				return 1
-			fi
-		;;
-	esac
-}
-
-stop_interface_dhcp() {
-	local config="$1"
-
-	local ifname
-	config_get ifname "$config" ifname
-
-	local lock="/var/lock/dhcp-${ifname}"
-	[ -f "$lock" ] && lock -u "$lock"
-
-	remove_dns "$config"
-
-	local pidfile="/var/run/dhcp-${ifname}.pid"
-	service_kill udhcpc "$pidfile"
-
-	uci -P /var/state revert "network.$config"
-}
-
-unbridge() {
-	local dev="$1"
-	local brdev
-
-	[ -x /usr/sbin/brctl ] || return 0
-	brctl show 2>/dev/null | grep "$dev" >/dev/null && {
-		# interface is still part of a bridge, correct that
-
-		for brdev in $(brctl show | awk '$2 ~ /^[0-9].*\./ { print $1 }'); do
-			brctl delif "$brdev" "$dev" 2>/dev/null >/dev/null
-			do_sysctl "net.ipv6.conf.$dev.disable_ipv6" 0
-		done
-	}
-}
diff --git a/package/base-files/files/sbin/ifdown b/package/base-files/files/sbin/ifdown
deleted file mode 100755
index 1455a9de7..000000000
--- a/package/base-files/files/sbin/ifdown
+++ /dev/null
@@ -1,57 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006-2011 OpenWrt.org
-
-. /etc/functions.sh
-[ $# = 0 ] && { echo "  $0 <group>"; exit; }
-
-case "$1" in
-	"-a")
-		[ -e "/tmp/resolv.conf.auto" ] && rm /tmp/resolv.conf.auto
-		config_cb() {
-			[ interface != "$1" -o -z "$2" ] || eval "$0 -w $2"
-		}
-		config_load network
-		exit 0
-	;;
-	"-w") shift ;;
-esac
-
-include /lib/network
-scan_interfaces
-
-cfg=$1
-debug "### ifdown $cfg ###"
-
-config_get proto "$cfg" proto
-[ -z "$proto" ] && { echo "interface not found."; exit; }
-
-config_get iface "$cfg" device
-[ "static" = "$proto" -o "none" = "$proto" ] && {
-	env -i ACTION="ifdown" INTERFACE="$cfg" DEVICE="$iface" PROTO="$proto" /sbin/hotplug-call "iface"
-}
-
-# call interface stop handler
-( type "stop_interface_$proto" ) >/dev/null 2>/dev/null && eval "stop_interface_$proto '$cfg'"
-
-config_get ifname "$cfg" ifname
-config_get device "$cfg" device
-
-[ ."$device" != ."$ifname" ] || device=
-for dev in $ifname $device; do
-	ifconfig "$dev" 0.0.0.0 down >/dev/null 2>/dev/null
-done
-
-config_get iftype "$cfg" type
-[ "bridge" = "$iftype" ] && brctl delbr "$ifname" >/dev/null 2>/dev/null
-
-# remove the interface's dns entries
-remove_dns "$cfg"
-
-# remove the interface's network state
-uci_revert_state network "$1"
-
-# revert aliases state as well
-config_get aliases "$1" aliases
-for config in $aliases; do
-	uci_revert_state network "$config"
-done
diff --git a/package/base-files/files/sbin/ifup b/package/base-files/files/sbin/ifup
deleted file mode 100755
index 5f8d80dc2..000000000
--- a/package/base-files/files/sbin/ifup
+++ /dev/null
@@ -1,51 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2006-2011 OpenWrt.org
-
-/sbin/ifdown "$@"
-
-. /etc/functions.sh
-[ $# = 0 ] && { echo "  $0 <group>"; exit; }
-
-setup_wifi=1
-
-case "$1" in
-	"-a")
-		[ -e "/tmp/resolv.conf.auto" ] && rm /tmp/resolv.conf.auto
-		config_cb() {
-			[ interface != "$1" -o -z "$2" ] || eval "$0 -w $2"
-		}
-		config_load network
-		exit 0
-	;;
-	"-w") setup_wifi=0; shift ;;
-esac
-
-if [ $setup_wifi -gt 0 ] && grep -q config /etc/config/wireless; then
-	find_related_radios() {
-		local wdev wnet
-		config_get wdev "$1" device
-		config_get wnet "$1" network
-
-		if [ -n "$wdev" ] && [ "$wnet" = "$network" ]; then
-			append radio_devs "$wdev" "$N"
-		fi
-	}
-
-	local radio_devs
-	local network="$1"
-	config_load wireless
-	config_foreach find_related_radios wifi-iface
-
-	local dev
-	for dev in $(echo "$radio_devs" | sort -u); do
-		/sbin/wifi up "$dev"
-	done
-fi
-
-include /lib/network
-scan_interfaces
-
-config_get ifname "$1" device
-for dev in ${ifname:-$1}; do
-	setup_interface "$dev" "$1"
-done
diff --git a/package/base-files/files/usr/share/udhcpc/default.script b/package/base-files/files/usr/share/udhcpc/default.script
deleted file mode 100755
index 8dbff4747..000000000
--- a/package/base-files/files/usr/share/udhcpc/default.script
+++ /dev/null
@@ -1,161 +0,0 @@
-#!/bin/sh
-[ -z "$1" ] && echo "Error: should be run by udhcpc" && exit 1
-
-. /etc/functions.sh
-include /lib/network
-RESOLV_CONF="/tmp/resolv.conf.auto"
-
-change_state () {
-	[ -n "$ifc" ] || return
-	uci_revert_state "$1" "$2" "$3" "$4"
-	uci_set_state "$1" "$2" "$3" "$4"
-}
-
-set_classless_routes() {
-	local max=128
-	local type
-	while [ -n "$1" -a -n "$2" -a $max -gt 0 ]; do
-		[ ${1##*/} -eq 32 ] && type=host || type=net
-		echo "udhcpc: adding route for $type $1 via $2"
-		route add -$type "$1" gw "$2" dev "$interface"
-		max=$(($max-1))
-		shift 2
-	done
-}
-
-setup_interface () {
-	local old_ip
-	local old_broadcast
-	local old_subnet
-	local old_router
-	local old_dns
-	local user_dns
-	local user_router
-	local user_metric
-
-	[ -n "$ifc" ] && {
-		old_ip="$(uci_get_state network "$ifc" ipaddr)"
-		old_broadcast="$(uci_get_state network "$ifc" broadcast)"
-		old_subnet="$(uci_get_state network "$ifc" netmask)"
-	}
-
-	[ "$ip" != "$old_ip" ] \
-	|| [ "${broadcast:-+}" != "$old_broadcast" ] \
-	|| [ "${subnet:-255.255.255.0}" != "$old_subnet" ] && {
-		echo "udhcpc: ifconfig $interface $ip netmask ${subnet:-255.255.255.0} broadcast ${broadcast:-+}"
-		ifconfig $interface $ip netmask ${subnet:-255.255.255.0} broadcast ${broadcast:-+}
-
-		change_state network "$ifc" ipaddr "$ip"
-		change_state network "$ifc" broadcast "${broadcast:-+}"
-		change_state network "$ifc" netmask "${subnet:-255.255.255.0}"
-	}
-
-
-	# Default Route
-	[ -n "$ifc" ] && {
-		change_state network "$ifc" lease_gateway "$router"
-		old_router="$(uci_get_state network "$ifc" gateway)"
-		user_router="$(uci_get network "$ifc" gateway)"
-		user_metric="$(uci_get network "$ifc" metric)"
-		[ -n "$user_router" ] && router="$user_router"
-	}
-
-	[ -n "$router" ] && [ "$router" != "0.0.0.0" ] && [ "$router" != "255.255.255.255" ] && [ "$router" != "$old_router" ] && {
-		echo "udhcpc: setting default routers: $router"
-
-		local valid_gw=""
-		for i in $router ; do
-			route add default gw $i ${user_metric:+metric $user_metric} dev $interface
-			valid_gw="${valid_gw:+$valid_gw|}$i"
-		done
-		
-		eval $(route -n | awk '
-			/^0.0.0.0\W{9}('$valid_gw')\W/ {next}
-			/^0.0.0.0/ {print "route del -net "$1" gw "$2";"}
-		')
-
-		change_state network "$ifc" gateway "$router"
-	}
-
-	# CIDR STATIC ROUTES (rfc3442)
-	[ -n "$staticroutes" ] && set_classless_routes $staticroutes
-	[ -n "$msstaticroutes" ] && set_classless_routes $msstaticroutes
-
-	# DNS
-	old_dns=$(uci_get_state network "$ifc" dns)
-	old_domain=$(uci_get_state network "$ifc" dnsdomain)
-	user_dns=$(uci_get "network.$ifc.dns")
-	[ -n "$user_dns" ] && dns="$user_dns"
-
-	[ -n "$dns" ] && [ "$dns" != "$old_dns" -o -n "$user_dns" ] && {
-		echo "udhcpc: setting dns servers: $dns"
-		add_dns "$ifc" $dns
-
-		[ -n "$domain" ] && [ "$domain" != "$old_domain" ] && {
-			echo "udhcpc: setting dns domain: $domain"
-			sed -i -e "${old_domain:+/^search $old_domain$/d; }/^search $domain$/d" "${RESOLV_CONF}"
-			echo "search $domain" >> "${RESOLV_CONF}"
-			change_state network "$ifc" dnsdomain "$domain"
-		}
-	}
-
-	[ -n "$ifc" ] || return
-
-	# UCI State
-	change_state network "$ifc" lease_server "$serverid"
-	change_state network "$ifc" lease_acquired "$(sed -ne 's![^0-9].*$!!p' /proc/uptime)"
-	change_state network "$ifc" lease_lifetime "$lease"
-	[ -n "$ntpsrv" ] && 	change_state network "$ifc" lease_ntpsrv "$ntpsrv"
-	[ -n "$timesvr" ] && 	change_state network "$ifc" lease_timesrv "$timesvr"
-	[ -n "$hostname" ] &&	change_state network "$ifc" lease_hostname "$hostname"
-	[ -n "$timezone" ] && 	change_state network "$ifc" lease_timezone "$timezone"
-
-
-	# Hotplug
-	env -i ACTION="$1" INTERFACE="$ifc" DEVICE="$ifname" PROTO=dhcp /sbin/hotplug-call iface
-}
-
-
-scan_interfaces
-applied=
-for ifc in $interfaces __default; do
-	if [ "$ifc" = __default ]; then
-		ifc=""
-		[ -n "$applied" ] && continue
-	else
-		config_get ifname "$ifc" ifname
-		[ "$ifname" = "$interface" ] || continue
-
-		config_get proto "$ifc" proto
-		[ "$proto" = "dhcp" ] || continue
-		applied=true
-	fi
-
-	case "$1" in
-		deconfig)
-			ifconfig "$interface" 0.0.0.0
-			[ -n "$ifc" ] && {
-				env -i ACTION="ifdown" INTERFACE="$ifc" DEVICE="$ifname" PROTO=dhcp /sbin/hotplug-call iface
-			
-				config_get device "$ifc" device
-				config_get ifname "$ifc" ifname
-				config_get aliases "$ifc" aliases
-				uci_revert_state network "$ifc"
-				[ -n "$device" ] && uci_set_state network "$ifc" device "$device"
-				[ -n "$ifname" ] && uci_set_state network "$ifc" ifname "$ifname"
-				[ -n "$aliases" ] && uci_set_state network "$ifc" aliases "$aliases"
-			}
-		;;
-		renew)
-			setup_interface update
-		;;
-		bound)
-			setup_interface ifup
-		;;
-	esac
-done
-
-# user rules
-[ -f /etc/udhcpc.user ] && . /etc/udhcpc.user
-
-exit 0