diff options
Diffstat (limited to 'package/base-files/brcm')
-rwxr-xr-x | package/base-files/brcm/bin/firstboot | 90 | ||||
-rwxr-xr-x | package/base-files/brcm/etc/init.d/netconfig | 98 | ||||
-rwxr-xr-x | package/base-files/brcm/etc/preinit | 13 | ||||
-rwxr-xr-x | package/base-files/brcm/sbin/mount_root | 35 |
4 files changed, 236 insertions, 0 deletions
diff --git a/package/base-files/brcm/bin/firstboot b/package/base-files/brcm/bin/firstboot new file mode 100755 index 000000000..b65d3ee98 --- /dev/null +++ b/package/base-files/brcm/bin/firstboot @@ -0,0 +1,90 @@ +#!/bin/sh +# Copyright (C) 2006 OpenWrt.org + +rom=$(awk '/squashfs/ {print $2}' /proc/mounts) +jffs=$(awk '/jffs2/ {print $2}' /proc/mounts) + +dupe() { # <new_root> <old_root> + cd $1 + echo -n "creating directories... " + { + cd $2 + find . -xdev -type d + echo "./dev ./jffs ./mnt ./proc ./tmp ./sys" + # xdev skips mounted directories + cd $1 + } | xargs mkdir -p + echo "done" + + echo -n "setting up symlinks... " + for file in $(cd $2; find . -xdev -type f;); do + case "$file" in + ./rom/note) ;; #nothing + ./etc/config*|\ + ./etc/resolv.conf|\ + ./usr/lib/ipkg/info/*) cp -af $2/$file $file;; + *) ln -sf /rom/${file#./*} $file;; + esac + done + for file in $(cd $2; find . -xdev -type l;); do + cp -af $2/${file#./*} $file + done + echo "done" +} + +pivot() { # <new_root> <old_root> + mount -o move /proc $1/proc && \ + pivot_root $1 $1$2 && { + mount -o move $2/dev /dev + mount -o move $2/tmp /tmp + mount -o move $2/sys /sys + return 0 + } +} + +mountdp() { # <device> <mount_point> <ignored> <fs> + dev=$1; mnt=$2; shift 2; opt=$* + mount $dev $mnt $opt + dupe $mnt $rom + pivot $mnt /rom +} + +ramoverlay() { + mkdir -p /tmp/root + mountdp /tmp/root /mnt -o bind +} + +[ "${0##*/}" = "firstboot" ] && { + [ -z "$rom" ] && { + echo "You do not have a squashfs partition; aborting" + echo "(firstboot cannot be run on jffs2 based firmwares)" + exit 1 + } + + [ "$1" = "switch2jffs" ] && { + mtd erase OpenWrt + mount -o remount,ro none / # try to avoid fs changing while copying + mount -o bind / /mnt + mount /dev/mtdblock/4 /rom/jffs -t jffs2 + echo -n "copying files ... " + cp -a /mnt/* /rom/jffs + umount /mnt + echo "done" + pivot /rom /mnt + mount -o move /mnt /tmp/root + pivot /jffs /rom + jffs2root --clean + exit 0 + } + + # script run manually + [ \! -z "$jffs" ] && { + echo "firstboot has already been run" + echo "jffs2 partition is mounted, only resetting files" + dupe $jffs $rom + exit 0 + } + + mtd erase OpenWrt + mountdp /dev/mtdblock/4 /jffs -t jffs2 +} diff --git a/package/base-files/brcm/etc/init.d/netconfig b/package/base-files/brcm/etc/init.d/netconfig new file mode 100755 index 000000000..fe39f5051 --- /dev/null +++ b/package/base-files/brcm/etc/init.d/netconfig @@ -0,0 +1,98 @@ +#!/bin/sh /etc/rc.common +# Copyright (C) 2006 OpenWrt.org + +START=05 + +start() { + [ -e /etc/config/network ] && exit 0 + + mkdir -p /etc/config + + ( + if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then + # WGT634u + echo boardtype=wgt634u + else + strings /dev/mtdblock/3 + fi + ) | awk ' + function p(cfgname, name) { + if (c[name] != "") print " option " cfgname " \"" c[name] "\"" + } + + BEGIN { + FS="=" + c["lan_ifname"]="eth0.0" + c["wan_ifname"]="eth0.1" + c["vlan0ports"]="1 2 3 4 5*" + c["vlan1ports"]="0 5" + } + + ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") { + nvram[$1] = $2 + } + + END { + # v1 hardware + if (nvram["boardtype"] == "bcm94710dev") { + # Asus WL-500g + if (nvram["boardnum"] == "asusX") { + c["lan_ifname"]="eth0 eth1" # FIXME + c["wan_ifname"]="" + } + } + if (nvram["boardtype"] == "bcm94710r4") { + # Toshiba WRC-1000 + c["lan_ifname"] = "eth0" + c["wan_ifname"] = "eth1" + } + if (nvram["boardtype"] == "wgt634u") { + c["vlan0ports"] = "0 1 2 3 5*" + c["vlan1ports"] = "4 5" + } + if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) { + if (nvram["boardnum"] == "45") { + c["vlan0ports"] = "1 2 3 4 5*" + c["vlan1ports"] = "0 5" + } else { + c["vlan0ports"] = "0 1 2 3 5*" + c["vlan1ports"] = "4 5" + } + } + + # WAP54G + if ((nvram["boardnum"] == "2") || \ + (nvram["boardnum"] == "1024")) { + c["lan_ifname"]="eth0" + c["wan_ifname"]="" + } + + print "#### VLAN configuration " + print "config switch eth0" + p("vlan0", "vlan0ports") + p("vlan1", "vlan1ports") + print "" + print "" + print "#### Loopback configuration" + print "config interface loopback" + print " option ifname \"lo\"" + print " option proto static" + print " option ipaddr 127.0.0.1" + print " option netmask 255.0.0.0" + print "" + print "" + print "#### LAN configuration" + print "config interface lan" + print " option type bridge" + p("ifname", "lan_ifname") + print " option proto static" + print " option ipaddr 192.168.1.1" + print " option netmask 255.255.255.0" + print "" + print "" + print "#### WAN configuration" + print "config interface wan" + p("ifname", "wan_ifname") + print " option proto dhcp" + }' > /etc/config/network +} diff --git a/package/base-files/brcm/etc/preinit b/package/base-files/brcm/etc/preinit new file mode 100755 index 000000000..fb13e107e --- /dev/null +++ b/package/base-files/brcm/etc/preinit @@ -0,0 +1,13 @@ +#!/bin/sh +# Copyright (C) 2006 OpenWrt.org + +export PATH=/bin:/sbin:/usr/bin:/usr/sbin +mount none /proc -t proc + +[ -f /etc/preinit.arch ] && . /etc/preinit.arch +[ -z "$FAILSAFE" ] || { + echo /bin/true > /proc/sys/kernel/hotplug + telnetd -l /bin/login <> /dev/null 2>&1 +} +mount_root ${FAILSAFE:+failsafe} +exec /sbin/init diff --git a/package/base-files/brcm/sbin/mount_root b/package/base-files/brcm/sbin/mount_root new file mode 100755 index 000000000..e73afdc88 --- /dev/null +++ b/package/base-files/brcm/sbin/mount_root @@ -0,0 +1,35 @@ +#!/bin/sh +# Copyright (C) 2006 OpenWrt.org + +is_dirty() { + grep Broadcom /proc/cpuinfo >&- || return 1 + OFFSET="$(($(hexdump -v /dev/mtdblock/1 -s 20 -n 2 -e '"%d"')-1))" + return $(hexdump -v /dev/mtdblock/1 -s $OFFSET -n 1 -e '"%d"') +} + +size=$(awk '/Mem:/ {l=5242880;print((s=$2/2)<l)?$2-l:s}' /proc/meminfo) +mount none /tmp -t tmpfs -o size=$size + +if [ "$1" != "failsafe" ]; then + mtd unlock linux + mount | grep jffs2 >&- + if [ $? = 0 ] ; then + mount -o remount,rw /dev/root / + else + . /bin/firstboot + is_dirty + [ $? != 0 ] && { + echo "switching to jffs2" + mount /dev/mtdblock/4 /jffs -t jffs2 + pivot /jffs /rom + } || { + echo "jffs2 unusable; using ramdisk" + ramoverlay + } + fi +fi + +mount none /tmp -t tmpfs -o remount,nosuid,nodev,mode=1777 +mkdir -p /dev/pts +mount none /dev/pts -t devpts +grep sysfs /proc/filesystems >/dev/null && mount -t sysfs none /sys 2>&- |