diff options
Diffstat (limited to 'package/base-files/brcm-2.6/etc/init.d/S05netconfig')
-rwxr-xr-x | package/base-files/brcm-2.6/etc/init.d/S05netconfig | 108 |
1 files changed, 108 insertions, 0 deletions
diff --git a/package/base-files/brcm-2.6/etc/init.d/S05netconfig b/package/base-files/brcm-2.6/etc/init.d/S05netconfig new file mode 100755 index 000000000..6a626f54a --- /dev/null +++ b/package/base-files/brcm-2.6/etc/init.d/S05netconfig @@ -0,0 +1,108 @@ +#!/bin/sh +[ -e /etc/config/network ] && exit 0 + +mkdir -p /etc/config + +( + if grep 'mtd0: 00060000' /proc/mtd 2>&- >&-; then + # WGT634u + echo boardtype=wgt634u + else + strings /dev/mtdblock/3 + fi +) | awk ' +function p(name) { + if (c[name] != "") print name "=\"" c[name] "\"" +} + +BEGIN { + FS="=" + c["lan_ifname"]="br0" + c["lan_ifnames"]="vlan0 eth1" + c["wan_proto"]="none" + c["wan_ifname"]="vlan1" + c["vlan0ports"]="1 2 3 4 5*" + c["vlan1ports"]="0 5" +} + +($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") { + nvram[$1] = $2 +} + +END { + # v1 hardware + if (nvram["boardtype"] == "bcm94710dev") { + # Linksys WRT54G v1.x + if (nvram["boardnum"] == "42") { + c["vlan0ports"]="" + c["vlan1ports"]="" + c["lan_ifnames"]="vlan2 eth2" + } + + # Asus WL-500g + if (nvram["boardnum"] == "asusX") { + c["lan_ifnames"]="eth0 eth1 eth2" # FIXME + # wan_ifname=eth1 + } + } + if (nvram["boardtype"] == "wgt634u") { + c["vlan0ports"] = "0 1 2 3 5*" + c["vlan1ports"] = "4 5" + c["lan_ifnames"] = "vlan0 ath0" + } + if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) { + c["vlan0ports"] = "0 1 2 3 5*" + c["vlan1ports"] = "4 5" + } + + # WAP54G + if ((nvram["boardnum"] == "2") || \ + (nvram["boardnum"] == "1024")) { + c["lan_ifnames"]="eth0 eth1" + c["wan_ifname"]="" + } + + print "#### VLAN configuration " + print "vlan0hwname=et0" + print "vlan1hwname=et0" + p("vlan0ports") + p("vlan1ports") + print "" + print "" + + print "#### LAN configuration" + print "lan_proto=\"static\"" + p("lan_ifname") + p("lan_ifnames") + print "lan_ipaddr=\"192.168.1.1\"" + print "lan_netmask=\"255.255.255.0\"" + print "# lan_dns=\"192.168.1.1\"" + print "# lan_gateway=\"192.168.1.1\"" + + print "" + print "" + + print "#### WAN configuration" + print "# wan_proto: WAN protocol, available protocols:" + print "# none: disable" + print "# dhcp: DHCP" + print "# static: Static IP" + print "# pppoe: PPP over Ethernet" + print "# pptp: Point-to-Point tunneling Protocol" + print "# for pppoe and pptp you need to use wan_ifname=\"ppp0\"" + print "" + print "wan_proto=dhcp" + p("wan_ifname") + print "wan_device=\"" c["wan_ifname"] "\"" + print "# wan_ipaddr=\"192.168.0.2\"" + print "# wan_netmask=\"255.255.255.0\"" + print "# wan_gateway=\"192.168.0.1\"" + print "# wan_dns=\"192.168.0.1\"" + print "" + print "## PPP over Ethernet and PPTP" + print "# wan_ifname=\"ppp0\"" + print "# ppp_username=\"my_username\"" + print "# ppp_passwd=\"my_password\"" + print "# pptp_server_ip=\"192.168.0.1\"" +} +' > /etc/config/network |